100%(1)100% нашли этот документ полезным (1 голос)
439 просмотров2 страницы
The continuous metering system (CMS) is used to meter all types of liquid additives. The system delivers liquid additives to the mixing water at a rate proportionate to the mixing rate. The CMS system does not introduce additives into the displacement tank.
The continuous metering system (CMS) is used to meter all types of liquid additives. The system delivers liquid additives to the mixing water at a rate proportionate to the mixing rate. The CMS system does not introduce additives into the displacement tank.
The continuous metering system (CMS) is used to meter all types of liquid additives. The system delivers liquid additives to the mixing water at a rate proportionate to the mixing rate. The CMS system does not introduce additives into the displacement tank.
Liquid-Additive Metering System The continuous metering system (CMS) liquid-additive metering system (Figure 1 and Table 1) is used to meter all types of liquid additives. With correct calibration and maintenance, the CMS system accurately meters both low-viscosity and high-viscosity additives. This additive system can be retrofitted to operate with conventional recirculating mixer (RCM) systems on any cementing skid. It delivers liquid additives to the mixing water at a rate proportionate to the mixing rate. Unlike previous additive systems, the CMS system does not introduce additives into the displacement tank. The CMS system continuously injects liquid additives into the suction side of the mixing pump that supplies water to the mixer. The liquid additives and mixing water are well mixed by the impeller of the mixing pump before the water enters the mixer. Features The CMS system has the following major components: progressive cavity liquid-additive pumps three-phase electric motor FVNR motor starter Unipro II controller HALLIBURTON D1TX proportional valves 20-gal hydraulic tank load-sense hydraulic pump commercial shearing gear pump hydraulic storage, filtration, and cooling systems Benefits The advantages of the CMS system include the following: Liquid additives are continuously injected into the mix water and uniformly mixed with either salt water or fresh water. The system eliminates the need for air-powered lightning mixers within the displacement tank. The system incorporates a place for mounting HalTank containers with the additive system, reducing the amount of required rig floor space. The system uses smaller displacement pumps and smaller motors, reducing overall unit costs. The system can power agitators for adequate agitation of liquid additives before and during the job. www.halliburton.com Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale. H02692 04/06 2006 Halliburton All Rights Reserved Printed in U.S.A. Figure 1Continuous metering system (CMS) liquid-additive metering system Table 1CMS System Product Specifications Dimensions Length Width Height (without 549-gal HalTank container) Height (with 549-gal HalTank container) Weight Without HalTank containers Dimensions of Frame used for Mass Flowmeter option Length Width Height Weight Three-Pump CMS System 139.8 in. (355.09 cm) 67.3 in. (170.94 cm) 33.0 in. (83.82 cm) 102.5 in. (260.35 cm) 4,800 lb (2177 kg) Four-Pump CMS System 186.4 in. (473.46 cm) 67.5 in. (171.45 cm) 33.0 in. (83.82 cm) 102.5 in. (260.35 cm) 6,000 lb (2722 kg) 42.0 in. (106.68 cm) 38.0 in. (96.52 cm) 38.0 in. (96.52 cm) 600 lb (272 kg) H A L 1 7 6 8 8