0 оценок0% нашли этот документ полезным (0 голосов)
41 просмотров2 страницы
The electric piston rod cylinder dnce is the perfect complement to pneumatic drives. Electric drives are precise and flexible, making them the ideal solution when forces have to be rapidly dissipated and positions approached with precision. The DNCE relies on the sturdy and reliable mechanical system of the proven cylinder DNC.
The electric piston rod cylinder dnce is the perfect complement to pneumatic drives. Electric drives are precise and flexible, making them the ideal solution when forces have to be rapidly dissipated and positions approached with precision. The DNCE relies on the sturdy and reliable mechanical system of the proven cylinder DNC.
The electric piston rod cylinder dnce is the perfect complement to pneumatic drives. Electric drives are precise and flexible, making them the ideal solution when forces have to be rapidly dissipated and positions approached with precision. The DNCE relies on the sturdy and reliable mechanical system of the proven cylinder DNC.
Range of applications With ball screw spindle and servomotor for dynamic push-pull applications With lead screw spindle and intelligent motor unit for the fastest format setting Features Freely programmable positions Gentle acceleration and braking Application-specific positioning profile Handling and assembly Flexible applications Specific positioning profiles www.festo.com/en/dnce 25 The perfect complement to pneumatic components At Festo, electric drives do not compete with pneumatic drives, but are instead the perfect complement to their capabilities. Latest example: The electric piston rod cylinder DNCE precise positioning or format stting within the cylinder housing. The optimum automation solution utilises the specific strengths of modern drive tech- nologies. Electric drives are pre- cise and flexible. This makes them the ideal solution when forces have to be rapidly dissipated and positions approached with preci- sion. The electric piston-rod cylin- der DNCE is now ready for use alongside electric toothed belts, handling and cantilever axes, mini slides, handling modules, servo drives and motors. It is the appli- cation that determines the type of drive: A lead screw spindle drive is used for format setting in print- ing machines, packaging machines and in feed technology, while ball screws are needed for dynamic push-pull applications, such as volumetric filling or stacking CDs, for example. Proven mechanical system Standardised on the outside, state-of-the-art on the inside this applies not only to the proven standards-based cylinder DNC, but also to its electric sibling, the DNCE. The DNCE also relies on the sturdy and reliable mechanical system of the DNC. This includes the robust construction, long service life, reliability of all the components and the broad range of accessories. The DNCE is also compatible with all DNC mounting attachments guide units and piston rod accessories, making expensive in-house produced parts a thing of the past. Flexible positioning The DNCE is the first choice when freely programmable positions, judder-free behaviour, gentle acceleration or an application- specific positioning profile is need- ed. Various travel profiles, speeds, travel distances and acceleration can be programmed freely and are set in the FCT software from Festo. The simple commissioning process is also carried out using this PC software. Ready-to-install solution The DNCE is available and sup- plied with the intelligent motor unit MTR-DCI or a servo motor in the form of a fully assembled system solution, thus creating the ideal unit. Integrated sensing included: The limit switches sit flush in the profile slot, and are thus protected, so there is no need for an additional mounting kit. Technical data Lead screw spindle drive Standard strokes: 100 600mm Repetition accuracy: 0.07 mm Max. acceleration: 1 m/s Max. speed: 70 mm/s Max. feed force: 1,200 Nm Ball screw spindle drive Standard strokes: 100 600 mm Repetition accuracy: 0.02 mm Max. acceleration: 6 m/s Max. speed: 635 mm/s Max. feed force: 900 Nm Preassembled as a ready assembled system solution with the intelligent motor unit MTR-DCI (top) or servomotor (bottom). Parameter settings and commissioning at the click of a mouse: The FCT software helps the user to easily make the neces- sary settings for the DNCE or any other electric drive from Festo.
S. Kannadhasan (Editor), R. Nagarajan (Editor), Alagar Karthick (Editor) - Intelligent Technologies For Sensors - Applications, Design, and Optimization For A Smart World-A