Академический Документы
Профессиональный Документы
Культура Документы
Critically evaluate knowledge from the professional journals and other information sources relevant to
their eld.
Engineering Management
Road Engineering
IT requirements
Access to an up-to-date computer is necessary. On-campus students can access appropriately equipped
laboratories, but should consider acquisition of their own computer. External students should be able to access
a computer with the following minimum standards as advised by the University. All students should have
access to email and the Internet via a computer running the latest versions of Internet web browsers such as
Internet Explorer or Firefox. The University has a wireless network for on-campus students' computers. In
order to take advantage of this facility and further enhance their on-campus learning environment, students
should consider purchasing a notebook/laptop computer with wireless connectivity. A notebook/laptop may
be required for some courses.
Articulation
Students who complete this program are eligible to articulate into the Master of Engineering degree. They
will receive full credit for the courses studied if they study the same major in both programs.
The standing of degrees awarded by an overseas institution will be determined by reference to the National
Ofce of Overseas Skills Recognition (NOOSR).
This version produced 7 Aug 2014. CRICOS: QLD 00244B | NSW 02225M
2 University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.
Postgraduate Certificate of Engineering (PGCN) - PGradCertEng (2014)
Credit
For the Postgraduate Certicate in Engineering no exemptions will be permitted. Candidates who have
completed the same or similar courses at USQ or similar courses at another institution should, with the approval
of the Faculty of Health, Engineering and Sciences, apply to vary their enrolment pattern on the basis of prior
study.
Advanced Structural Engineering Design Major recommended enrolment pattern
Students are able to enrol in any offered mode of a course (on-campus, distance education or online), regardless
of the program mode of study they enrolled in.
.
Enrolment requirements Year of programand semester in which course
is normally studied
Course
Online
(ONL)
External
(EXT)
On-campus
(ONC)
Sem Year Sem Year Sem Year
Schedule A: Core Course
Students must complete the course in this schedule
1 1 CIV8801 Code-Based Structural Design
Schedule B: Elective courses
Students must complete three of the courses in this schedule
2 1 CIV8802 Advanced Prestressed Concrete ]
Pre-requisite: CIV3506 or MEC3203 or Stu
dents must be enrolled in one of the follow
1 CIV8803 Mechanics and Technology of Fibre
Composites
ing Programs: GCEN or GDET or METC or
MEPR or GCNS or GDNS or MENS or
MENC
2 2 CIV8804 Advanced Design Practice using Finite
Element Analysis
2 2 ENG8104 Asset Management in an Engineering
Environment
Footnotes
Offered Odd Years Only ]
Engineering Management Major recommended enrolment pattern
Students are able to enrol in any offered mode of a course (on-campus, distance education or online), regardless
of the program mode of study they enrolled in.
Enrolment requirements Year of programand semester in which course
is normally studied
Course
Online
(ONL)
External
(EXT)
On-campus
(ONC)
Sem Year Sem Year Sem Year
Schedule A: Core Course
Students must complete the two course in this schedule
2 ENG8103 Management of Technological Risk
1 ENG8104 Asset Management in an Engineering
Environment
Schedule B: Elective courses
Students must complete two of the courses in this schedule
1 ENG8101 Technological Impact and its Management
2 ENG8102 Towards Sustainable Development*
2 ENG8205 Technology Management Practice
2 ENG8207 Technological Innovation and Development
This version produced 7 Aug 2014. CRICOS: QLD 00244B | NSW 02225M
3 University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.
Postgraduate Certificate of Engineering (PGCN) - PGradCertEng (2014)
Footnotes
This course is not offered in 2013. Students should instead substitute ECO8012 *
Notes:
Some courses may be offered on-campus at Springeld.
Engineering Project Management Major recommended enrolment pattern
Students are able to enrol in any offered mode of a course (on-campus, distance education or online), regardless
of the program mode of study they enrolled in.
Enrolment requirements Year of programand semester in which course
is normally studied
Course
Online
(ONL)
External
(EXT)
On-campus
(ONC)
Sem Year Sem Year Sem Year
Schedule A: Core Course
Students must complete the two course in this schedule
1, 3 1, 3 MGT8022 Project-Based Management*
2 2 ENG8111 Project Requirements Management
Schedule B: Elective courses
Students must complete two of the courses in this schedule
2 ENG8103 Management of Technological Risk
1 ENG8104 Asset Management in an Engineering
Environment
2 ENG8205 Technology Management Practice
1 MGT8025 Project Scope, Time and Cost Management
Footnotes
It is strongly recommended that students enrol in MGT8022 prior to, or at the same time as, enrolling in subsequent project management
courses.
*
Notes:
Some courses may be offered on-campus at Springeld.
Road Engineering Major recommended enrolment pattern
Students are able to enrol in any offered mode of a course (on-campus, distance education or online), regardless
of the program mode of study they enrolled in.
Enrolment requirements Year of programand semester in which course
is normally studied
Course
Online
(ONL)
External
(EXT)
On-campus
(ONC)
Sem Year Sem Year Sem Year
Schedule A: Core Course
Students must complete the two course in this schedule
2 CIV5704 Road and Street Engineering
1 ENG8104 Asset Management in an Engineering
Environment
Schedule B: Elective courses
Students must complete two of the courses in this schedule
1 AGR3304 Soil Science
2 2 ECO8012 Methods for Sustainable Development
2 ENG8103 Management of Technological Risk
2 ENG8205 Technology Management Practice
Pre-requisite: ENG2102 or Students must
be enrolled in one of the following Programs:
2 ENV3105 Hydrology
GCEN or GDET or METC or MEPR or GCN
S or PGCN or GDNS or MENS
This version produced 7 Aug 2014. CRICOS: QLD 00244B | NSW 02225M
4 University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.
Postgraduate Certificate of Engineering (PGCN) - PGradCertEng (2014)
Enrolment requirements Year of programand semester in which course
is normally studied
Course
Online
(ONL)
External
(EXT)
On-campus
(ONC)
Sem Year Sem Year Sem Year
Pre-requisite: MAT1100 or MAT1500 or
ENM1600 or Students must be enrolled in
1 ENV4204 Environmental Technology
one of the following Programs: GCEN or
GDET or METC or MENS or GCNS or
GDNS or MSST or MEPR.
Pre-requisite: GIS1402 and CSC1401 or S
tudents must be enrolled in one of the follow
1 GIS3407 GIS Programming and Visualisation
ing Programs: GDST or MSST or GCST or
MENS
This version produced 7 Aug 2014. CRICOS: QLD 00244B | NSW 02225M
5 University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.
Postgraduate Certificate of Engineering (PGCN) - PGradCertEng (2014)