0 оценок0% нашли этот документ полезным (0 голосов)
31 просмотров1 страница
Drip Pan Elbow, when used in conjunction with a safety relief valve, provides a suitable unrestricted, selfdraining outlet. This improves the performance and longevity of the safety valve by alleviating axial loads on the valve, which could impair its operation and shut off. Local regulation may restrict the use of this product below the conditions quoted.
Drip Pan Elbow, when used in conjunction with a safety relief valve, provides a suitable unrestricted, selfdraining outlet. This improves the performance and longevity of the safety valve by alleviating axial loads on the valve, which could impair its operation and shut off. Local regulation may restrict the use of this product below the conditions quoted.
Drip Pan Elbow, when used in conjunction with a safety relief valve, provides a suitable unrestricted, selfdraining outlet. This improves the performance and longevity of the safety valve by alleviating axial loads on the valve, which could impair its operation and shut off. Local regulation may restrict the use of this product below the conditions quoted.
junction with a safety relief valve, pro- vides a suitable unrestricted, self-drain- ing outlet. This improves the performance and longevity of the safety valve by alle- viating axial loads on the valve, which could impair its operation and shut off. In the interests of development and improvement of the product, we reserve the right to change the specification. Model DPE Sizes 3/4" to 4" 6" & 8" Connections Female NPT Flanged ANSI 125 Construction Cast Iron (ASTM A126 CL B) Local regulation may restrict the use of this product below the conditions quoted. Limiting conditions refer to standard connections only. Typical Applications Specifically for use on the outlet connection of safety/relief valves to assure unrestricted discharge. TI-3-2142-US 08.07 Sample Specification Drip Pan Elbows for use with safety/relief valves shall be ASTM A126 CL B Cast Iron, and be of the same size as the valve outlet or larger. Pipe as shown on the drawings. Installation The Drip Pan Elbow is to be connected to the discharge connection of the safe- ty/relief valve by a short pipe nipple. Flanged valves 4" and smaller will require a companion flange and short nipple the same size as the valve outlet. The drain connection on the bottom of the elbow should be piped to waste. Please refer to ASME code for additional installation details. Dimensions (nominal) in inches and millimeters SIZE A B C D E F G. NPT Weight INLET in in in in in in in Lb. in/mm (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg.) 3/4" 2.00 3.75 1.88 2.00 1.00 1.50 3/8 2 (20) (51) (95) (48) (51) (25) (38) (10) (1 ) 1" 2.00 3.75 1.88 2.00 1.00 1.50 3/8 2 (25) (51) (195) (48) (51) (25) (38) (10) (1) 1-1/4" 2.00 5.50 2.47 4.13 1.44 2.13 3/8 7.5 (32) (51) (140) (63) (105) (37) (54) (10) (3) 1-1/2" 2.00 5.50 2.47 4.13 1.44 2.13 3/8 7.5 (40) (51) (140) (63) (105) (37) (54) (10) (3) 2" 3.00 6.25 2.31 3.63 1.63 2.25 1/2 8.5 (50) (76) (159) (159) (92) (41) (57) (15) (4) 2-1/2" 4.00 7.38 3.00 4.31 1.94 2.69 3/4 12 (65) (102) (187) (176) (109) (49) (68) (20) (5) 3" 4.00 8.00 3.050 4.88 2.31 3.13 3/4 19 (80) (102) (203) (89) (124) (59) (80) (20) (9) 4" 6.00 9.63 4.50 5.75 2.88 3.75 3/4 25 (100 ) (152) (245) (114) (146) (73) (95) (20) (11) 6" 8.00 12.75 6.63 7.44 4.19 8.00 3/4 105 (150) (203) (324) (168) (189) (106) (203) (20) (48) 8" 10.00 16.50 7.50 9.44 5.38 10.75 1 202 (200) (254) (419) (191) (240) (137) (273) (25) (92) Pipe Size Riser Supported Overhead Pipe Size Riser Supported Overhead Sizes: 3/4" - 4" Construction Material: A126-B Cast Iron Sizes: 6" - 8" Construction Material: A126-B Cast Iron Limiting Operating Conditions Max. Operating Pressure (PMO) 250 psig (17) barg) Max. Operating Temperature (TMO) 450F (232C) at all operating pressures A A
Procut Catalogue 2010
Procut is an internationally renowned brand of high quality carbide burrs, and forms a key part of ATA
Group, a privately owned organisation with over 50 years experience in the supply of metal working
solutions to all major industrial sectors.
We are committed to providing our customers with high performance products that maximise productivity
and reduce costs. Our headquarters and global production centre based in Cavan, Ireland, is accredited to
ISO9001:2008 and equipped with the latest CNC technology delivering product of unrivalled quality and
consistency.