CA 3000 Bearing Catalogue

BEARING
ENGINEERING
CATALOG
Mounted Roller Bearings

Sleevoil Hydrodynamic
Bearings
Plain Bearings
Journal Bearings
Take-Up Frames
To receive a copy of the Dodge Bearing

Engineering Catalog, Dodge Gearing
Engineering Catalog, Dodge Power
Transmission Components Engineering
Catalog, or Dodge Product Manuals, contact
your local authorized Dodge Distributor or
www.baldor.com.
MEMBER OF...
AMERICAN GEAR MANUFACTURERS ASSOCIATION
MECHANICAL POWER TRANSMISSION ASSOCIATION
AMERICAN BEARING MANUFACTURERS ASSOCIATION
PARTICIPATING MANUFACTURER
BEARING SPECIALISTS ASSOCIATION
POWER TRANSMISSION DISTRIBUTORS ASSOCIATION
CONVEYOR MANUFACTURERS ASSOCIATION
HYDRAULIC INSTITUTE
Dodge Products are

Manufactured in
ISO 9002 Certified Plants
Prices and data indicated in this document are for your convenience and were correct at time of printing with the
exception of clerical and/or printing errors. Possession of this document by any person or company is not to be
construed as an offer to sell to him or to anyone else the goods listed herein at the prices stated.
ALL DATA AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE and shall be subject to those prices in effect
at time of shipments. All published and quoted prices are based upon the application of, and all sales are expressly
subject to, the Companys Standard Terms and Conditions of Sales are available upon request. This document
supersedes all previously published catalog/pricing documents.
In illustrations throughout this catalog, safety guards

have been removed for photographic purposes.
WARNING
The information provided for Product Interchange in this
catalog is for use only as a general reference by persons
qualified to recognize unreasonable selection options.
Products suggested as substitutes may have dimensional,
rating, pricing and other differences from products to be
replaced. This selection method must be used in conjunction
with the applicable product catalog which contains important
precautions and other pertinent information.
2012 Baldor Electric Company
WARNING: Because of the possible danger to person(s) or property from accidents which may result from the improper use of products, it is important that correct procedures be
followed: Products must be used in accordance with the engineering information specified in the catalog. Proper installation, maintenance and operation procedures must be observed.
The instructions in the instruction manuals must be followed. Inspections should be made as necessary to assure safe operation under prevailing conditions. Proper guards and other
suitable safety devices or procedures as may be described or as may be specified in safety codes should be provided, and are neither provided by Baldor Electric Company nor are the
responsibility of Baldor Electric. This unit and its associated equipment must be installed, adjusted and maintained by qualified personnel who are familiar with the construction and
operation of all equipment in the system and the potential hazards involved. When risk to persons or property may be involved, a holding device must be an integral part of the driven
equipment beyond the speed reducer output shaft.
For Additional information and Dodge Product Manuals on

Dodge Bearing Products, Dodge Gearing Products or Dodge
PT Components:
> contact your local authorized Dodge Distributor
> contact us at 864.297.4800
> visit us on the web at www.baldor.com
Baldor Electric Company

P.O. Box 2400, Fort Smith, AR 72902-2400 U.S.A., Ph: (1) 479.646.4711, Fax (1) 479.648.5792, International Fax (1) 479.648.5895
Baldor - Dodge
6040 Ponders Court, Greenville, SC 29615-4617 U.S.A., Ph: (1) 864.297.4800, Fax: (1) 864.281.2433
Baldor Electric Company
CA3000B
www.baldor.com
All Rights Reserved. Printed in USA.

4/14 CJK 50,000
CONTENTS
DODGE BEARING CATALOG
CA3000A VOL. A
REFERENCE GUIDE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REFERENCE GUIDE-1
ULTRA KLEEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B1-1
E-Z KLEEN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B2-1
EXTREME DUTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3-1
SETSCREW - SC/SCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B4-1
GRIP TIGHT - GT/GTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B5-1
D-LOK - DL/DLM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B6-1
ECCENTRIC COLLAR - SXR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7-1
SETSCREW VSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B8-1
ECCENTRIC COLLAR - SXV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B9-1
TAKE-UP FRAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-1
ENGINEERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-1
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1
Key Word Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEYWORD-1
CA3000B VOL. B
REFERENCE GUIDE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REFERENCE GUIDE-1
E-FAMILY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-1
SPECIALITY TAPERED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-1
S-2000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B12-1
UNISPHERE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-1
IMPERIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-1
UNIFIED SAF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-1
PLUMMER BLOCKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-1
SLEEVE BEARINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-1
SLEEVOIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-1
TAKE-UP FRAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-1
ENGINEERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-1
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1
Key Word Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEYWORD-1
Polymer-Housed Polymer Sleeve Bearings

Page B2-1
440C Stainless steel inserts

Polymer and stainless housings
Polymer housing contains additive that

prevents bacterial and fungal growth
65 Setscrew
All polymer and stainless steel construction
3/4 - 2 Bore
Solid polymer housing has no cavities and

no fillings
20-50mm Metric bore
Conforms to FDA /USDA specifications
QuadGuard Seal
Polymer sleeve insert with stainless steel

anti-rotation pin
Stainless Balls
Maxlife Cage
No lubrication required, self-lubricated polymer sleeve insert for

maintenance-free operation
Snap-in style end covers available from stock

Nomenclature: P2B-SCEZ-100-PSS
Bearing Reference
Guide
ULTRA KLEEN - SS Inserts Ball Bearings

Page B1-1
E-Family Roller
Bearings
REFERENCE GUIDE
Operates in temperatures from -40F to 180F

3/4 - 1-15/16 size
E-Z KLEEN Ball Bearings

Page B2-1
Extreme Duty / SCED SCMED Ball Bearings

Page B3-1
Two types: polymer housed units

and stainless steel housed units
Specialty Tapered
Products
Offered in a wide variety of housing configurations and all

popular bore sizes
- PSS = Polymer Housing, Stainless Insert

- SHSS = Stainless Housing, Stainless insert
Synthetic grease / Mobilith SHC 220 PM
Two inserts: corrosion resistant

(comparable to 440 stainless steel)
and standard steel insert with
flingers
Maxlife cage
Snap-in style end covers available
from stock
65 Setscrew
QuadGuard seal
Other shaft attachment methods are available upon request
Snap-in style end covers available from stock
Wide inner ring design
Maxlife cage
Anti-Rotation Pin to prevent insert from spinning in housing
OptionalBEV modification for the beverage industry
Grade 10 balls
Interchangeable mounting dimensions with most competitive

products
Bore Range
- SC-3/4 to 2-15/16 20mm to 75mm
- SCM-1 to 3-1/2, 25mm to 85mm
Anti-rotation device prevents insert rotation associated with light

or rotating loads/high-speed applications
UNISPHERE II
Three locking styles: 65 setscrew angle (SC), concentric clamp

collar (GT), and thin wall adapter (GT)
S-2000
QuadGuard seal
UNIFIED SAF
IMPERIAL
Plus or minus 2 static misalignment
REFERENCE GUIDE-1
Bearing Reference
Guide
REFERENCE GUIDE
E-Family Roller
Bearings
Specialty Tapered
Products
Setscrew Ball Bearings

Page B4-1
D-LOK Ball Bearings

Page B6-1
Two types: normal duty SC, medium

duty SCM
Two types: normal duty DL and

medium duty DLM
DualGuard seal - comprised of single

lip seal and rubberized flinger standard on all
SC/SCM ball bearings. LL Lo Torque
Labyrinth seals optional.
DualGuard seal - comprised of

single lip seal and rubberized flinger
- standard on all DL/DLM ball
bearings. LL Lo Torque Labyrinth
seals optional
Snap in end covers available from stock for most popular cast
housings.
housings

products

products
65 setscrew angle for greater holding power and ease of

installation in confined areas
Concentric clamp collar locks the bearing to the shaft by

tightening a single Allen wrench cap screw. The bearing will
not mar the shaft like setscrew and eccentric collar bearings,
providing concentricity between the bearing and shaft
Anti-rotation device on SC and SCM bearings prevents insert

rotation associated with light or rotating loads/ high-speed
applications
Expansion and non-expansion pillow blocks available for popular
SC shaft sizes

High-temperature option available to 400F on SC and SCM

shaft sizes
High-temperature option available to 400F

S-2000
GRIP TIGHT Ball Bearings

Page B5-1
Eccentric Collar Ball Bearings

Page B7-1
Two types: normal duty GT and

medium duty GTM
Two types: normal duty SXR and SLX

DualGuard seal - comprised of single lip
seal and rubberized flinger - standard
on all SXR ball bearings. LL Lo Torque
Labyrinth seals optional
DualGuard seal - comprised of single

lip seal and rubberized flinger standard on all GT/GTM ball bearings.
LL Lo Torque Labyrinth seals optional
UNISPHERE II
housings
setscrew, eccentric clamp collar products
Thin Wall Adapter mounting offers 360 full shaft contact and
concentricity. No shaft marring or fretting corrosion like setscrew
and eccentric collar products. Integral dismount feature easily
removes the bearing from the shaft. Turned, ground, and
polished shafting is not required.
IMPERIAL
Anti-rotation device prevents insert rotation associated with

heavy loads, vibration, unbalanced loads, and high-speed
applications
Expansion pillow blocks available for popular shaft sizes
Snap in end covers available from stock

for most popular cast housings
Interchangeable mounting dimensions
with most competitive products
Eccentric collar locks the bearing to the shaft by a quarter turn of
the collar in direction of shaft rotation. Collar is secured in place
with setscrew
Anti-rotation device on SXR prevents insert rotation associated
with light or rotating loads/high-speed applications
SXR shaft sizes
High-temperature option available to 400F on SXR
Setscrew VSC, SL Ball Bearings

Page B8-1
Intermediate duty
UNIFIED SAF
Wide inner ring

65 setscrew
ProGuard lip seal
REFERENCE GUIDE-2
Double-Interlock Tapered Roller Bearings

Page B10-5
Intermediate duty
Wide inner ring
Tapered roller bearing durability in a variety

of styles
ProGuard lip seal
XTS triple lip seal
Eccentric locking collar
Extra protection E-TECT seal option
Special clearances and greases available

Self aligning
Factory assembled, adjusted, and lubricatedshaft ready
Air Handling Ball Bearings

Page B5-12, B4-16, B6-12
Sealed bearing
Thin wall adapter: normal duty GTAH

and medium duty GTMAH
Tapered roller bearing with reduced

length through bore

products
shaft sizes
Allows bearing to be closer to the load

for reduced shaft design
Self aligning
Factory assembled, adjusted, and lubricatedshaft ready
Same housing as double-interlock
XTS triple lip seal
Extra protection - E-TECT Seal Option
TAF Tapered Roller Bearings

Page B10-6
Shaft readymounts six times faster than
SAF
Interchangeable with SAF style pillow
blocks
Self aligning, factory assembled, adjusted, and lubricated
UNISPHERE II
Tapered bearing is a cost-saving alternative

to SAF spherical bearings
Type E Tapered Roller Bearings (E-XTRA)

Page B10-3
Completely assembled, factory
adjusted, and properly
lubricatedshaft ready
Single collar design saves space and

installation time
S-2000
Single-lip contact seal (standard

on SCAH and SCMAH), single-lip
contact seal with flingers (optional
on SCAH and SCMAH, standard on DLAH, DLMAH and GTAH,
GTMAH), low-torque labyrinth seal (optional), end covers
available from stock
Specialty Tapered
Products
Type K Tapered Roller Bearings

Page B10-5
Setscrew: normal duty (SCAH) and

medium duty (SCMAH)
Concentric clamp collar: normal duty
(DLAH) and medium duty (DLMAH)
Tapered rolling elements
Bearing Reference
Guide
Eccentric SXV Collar, SLX Ball Bearings

Page B9-1
E-Family Roller
Bearings
REFERENCE GUIDE
XTS triple lip seal

E-TECT seal option available up to 5
Optional sensors for speed, vibration, and temperature
Up to 5 static misalignment
Comparable mounting dimensions with ball bearings

E-XTRA allows easy upgrade from ball bearings
Type EXL Tapered Roller Bearings

Page B10-4
XTS Triple-Lip Seal
Up to 4 of misalignment capability
Totally Sealed Inner Unit
High Strength Ductile Iron Housings
Available in Expansion and Non-Expansion
Housings
Type C Specialty Tapered Bearings

Page B11-5
IMPERIAL
Extra protectionE-TECT seal

option
Two single-row tapered bearings press-fitted

on sleeve
Improved concentricity over other collarmounted types of bearings
Steel multiple labyrinth seals
Rugged two-piece outer housing
Positive concentric clamp sleeve mounting
Heavy duty gray iron
REFERENCE GUIDE-3
UNIFIED SAF
XTS triple lip seal
Bearing Reference
Guide
REFERENCE GUIDE
Special Duty Tapered Roller Bearings
Page B11-3
Imperial IP Spherical Roller Bearings

Page B14-1
Quality duplex tapered roller bearing
Industrys only push/pull adapter

mount system
Tapered adapter sleeve mounting
Available in 2-bolt and 4-bolt pillow

blocks, flanges, and take-ups
Effective piston ring seals

E-Family Roller
Bearings
Rugged two-piece housing
Accepts commercial tolerance

shafting
Heavy duty gray iron
Installation and removal in less than 15 minutes

Full concentric shaft attachment with adaptor sleeve mount
Specialty Tapered
Products
S-2000 Spherical Roller Bearings

Page B12-1
Virtually eliminates fretting corrosion
High-capacity, double-row spherical rollers
Shaft-ready out of the box
Permits static or dynamic misalignment up

to +/- 1
Available with TRIDENT triple lip or labyrinth seal options
Capable of withstanding static or dynamic misalignment

of 1
IP, IP-E, IP-HD and ISN housing design
Factory sealed, lubed, and adjusted

Features springlok collar that acts as a
flinger
ISAF Spherical Roller Bearings

Page B14-10
65 springlok collar mount for increased holding power vs. 90 or

120
Dimensionally interchangeable with

SAF style pillow blocks
Setscrew mounted
Patented Imperial adapter

mounting system
S2000, S2000-E, and S2000-HD housing designs

S-2000
Installation and removal in less than

15 minutes
UNISPHERE II Spherical Roller Bearings

Page B13-1
Easy installationno feeler gauges

needed
Full 2 misalignment capability
UNISPHERE II
Dimensionally interchangeable with ball

bearings in length through bore, baseto-center height, and footprint
Virtually eliminates fretting corrosion

Shaft-ready out of the box, no assembly of components
necessary
Approximately five times the rating of

ball bearings
Features same rolling elements and
installation-ready components as S-2000
Maintains sealing effectiveness with proven R seal
Tapered seal area maintains seal contact during maximum
misalignment
IMPERIAL
Springlok collar mount with 65 setscrew spacing for optimum

clamping force
ISAF HYD Spherical Roller Bearings

Page B14-10
Patented integral hydraulic mounting and dismounting
Built in taconite style seals in addition to conventional rubbing
seals
Four-bolt pillow blocks 5-7/16 through 15
22232K through 23176K double row spherical bearings
Ductile iron housings
ISNX metric dimensioned housing also
available
UNIFIED SAF
REFERENCE GUIDE-4
Split-Spher Spherical Roller Bearings

Page B15-5
Patented ISN Push/Pull adapter

mounting system
Split-race spherical bearing

fits USAF 500 housings
and replaces bearing and
adapter assemblies
Eliminates need for feeler gauges

Easy removal
Easy to replace without

removing other shaftmounted components
Expansion & non-expansion, field

convertible
Triple lip contact seals for wet or dirty applications
Labyrinth non-contact seals for high speed & high temperature
applications
Only split-race bearing made

to standard SAF pillow block
dimensions
Bearing Reference
Guide
ISN Spherical Roller Bearings

Page B14-1
E-Family Roller
Bearings
REFERENCE GUIDE
Has same OD dimensions as a standard spherical bearing
Patented integral hydraulic mounting and dismounting
SNX Spherical Roller Bearings

Page B16-25
Built-in taconite style seals in

addition to conventional rubbing
seals
Dimensionally interchangeable plummer

block with metric SN housing
Four-bolt plummer blocks for

150mm through 360mm
Specialty Tapered
Products
Uses 22200 Series split roller bearings
ISNX HYD Spherical Roller Bearings

Page B16-20
General-purpose, high-capacity,
double-row, spherical roller bearings
22134K through 23176k double row

spherical bearings
Five different sealing options to match

most operating conditions
Ductile iron housings
Grease or oil lubrication

SNX30 from 110mm through 170mm
S-2000
Adapter and direct mount
22200, 22300, 23000, 23100, and 23200 Series

Industry-standard dimensions interchangeable with SAF
housings
Five sealing options to match most
operating conditions
Cast-in dimples locate drill holes
for lube fitting, vents, sensors, and
mounting modifications
Standard housings have two
oversized drains adaptable for
circulating oil systems
SDX (cast iron), SDXD (ductile iron) Spherical

Roller Bearings
Page B16-46
Metric dimensioned plummer block housing
Accepts 23000K and 23100K bearings
Sized from 150mm through 320mm
UNISPHERE II
USAF Spherical Roller Bearings

Page B15-3
Direct seal greasing standard
UNIFIED SAF
IMPERIAL
Pry slots allow easy separation of the pillow block
REFERENCE GUIDE-5
Bearing Reference
Guide
REFERENCE GUIDE
SOLIDLUBE Sleeve Bearings
Page B17-2
SLEEVOIL R Series
Hydrodynamic Pillow Block Bearings
Page B18-1
Functions in harsh environments

where ball bearing will not
Extended life (no metal-to-metal contact

during operation)
Self-lubricating, statically self

aligning
Handles high speeds
E-Family Roller
Bearings
Covers a wide range of temperature

extremes
Dampens vibration, provides quiet

operation
- 700 Series: -40F to 700F
Fully split for ease of maintenance
- 1000 Series: -200F to -40F and 250F to 1000F

Housing types: 2-bolt pillow blocks, 4-bolt and 2-bolt flange
units, and take-up units
Ideal where bearings are subject to dry cycles or where lube
systems would be too costly
Specialty Tapered
Products
Recommended for slow speeds and limited shaft movement

applications
Bore sizes 3/4 to 8
Babbitted & Bronze Bushed Sleeve Bearings

Page B17-3
Self aligning
Thrust capability
External cooling (air, water, or oil) available for hot shafts
SLEEVOIL RTL Series Hydrodynamic Pillow

Block Bearings
Page B18-1
Extended life (no metal-to-metal contact
during operation)
Handles high speeds
S-2000
Good for slow to medium and

shock loads
Dampens vibration, provides quiet

operation
Good for slow speeds and shock

loads
Fully split for ease of maintenance
Capable of MPTA load ratings
Three times the thrust load capability of R Series
Cast-iron housings in 2- and 4-bolt

pillow blocks
External cooling (air, water, or oil) available for hot shafts
Self aligning
Babbitted bearing features solid or fully split housing

Bronze bushed bearing features fully split housing
UNISPHERE II
SLEEVOIL Oil Level & Filtration System (OLF)

Page B18-30
Bronze bushing is split and easily replaced
Maintains proper oil level while bearing

is running
BRONZOIL Sleeve Bearings

Page B17-2
Increases bearing performance and life
Self Oiling Bushing Feeds Oil to

Shaft
Ensures filtered clean oil
Allows even oil distribution and cooler

operating temperatures
Permits easy filter change while bearing is operating
IMPERIAL
Split Pressed Steel Housing

Statically Self-Aligning
Bushing Shoulder Provides SelfLubricating Bearing Thrust Surface
Slotted Bolt Holes
Oil Resistant Rubber Grommets Available for Sound Isolation and
Static Electricity Protection
UNIFIED SAF
REFERENCE GUIDE-6
Bearing Reference
Guide
REFERENCE GUIDE
Take-Up Frames
Page B19-1
6 take-up frame types available from
stock
Take-up frames allow for the mounting of Dodge ball, roller, and
sleeve bearings
Take-up frame capacity is pre-engineered to exceed bearing
capacity
Made to provide/maintain tension and shaft centers on a variety
of belt and chain-type conveyors
E-Family Roller
Bearings
Standard take-up frame travel from

1-1/2 to 60
Specialty Tapered
Products
Hydraulic and pneumatic tensioning available
Smart Products
Page B10-67, B14-103, B15-54
Online monitoring of temperature, vibration,
and speed
Plug and play installation
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
Available on TAF, USAF, and ISAF
REFERENCE GUIDE-7
Bearing Reference
Guide
BALL BEARING INDEX

HOUSING
P2B-
E-Family Roller
Bearings
P2B-
P2B-GT-B5-8
P2B-GTEZ
-PCR-B2-44
-SHCR-B2-26
P2B-GTM-B5-20
TBTB-
F2BF2B-
TB-GT-B5-24
TB-GTEZ
-PCR-B2-50
LFTLFT-
F2B-GT-B5-24
F2B-GTEZ
-PCR-B2-54
-SHCR-B2-30
F2B-GTM-B5-30
FBFB-
LF- / F3B-
FB-GT-B5-33
FB-GTEZ
-PCR-B2-58
GT-GTM
GT- / GTEZ- / GTMSpecialty Tapered

Products
S-2000
I
N
S
E
R
T
S
SC, SCM
P2B-SC-B4-12
P2B-SCRZ
-PCR-B2-46
-SHCR-B2-26
P2B-SCM-B4-26
P2B-SL-B4-30
TB-SC-B4-32
TB-SCEZ-B2-29
F2B-SC-B4-34
F2B-SCEZ
-PCR-B2-56
-SHCR-B2-31
F2B-SCM-B4-42
F2B-SL-B4-48
FB-SC-B4-50
LF-SC-B4-52
FB-SCRZ
-PCR-B2-59
-SHCR-B2-34
LF-SCEZ-B2-33
LFT-SC-B4-46
LFT-SCEZ-B2-33
F3B-SL-B4-53
SC- / SCM- / SL-
P2B-VSC-B8-8
F2B-VSC-B8-14
VSC-
VSC-
UNISPHERE II
P2B-SXR-B7-12
TB-SXR-B7-22
F2B-SXR-B7-24
P2B-SXV-B4-6
TB-SXV-B9-12
F2B-SXV-B9-16
LFT-SXV-B9-18
F2B-DL-B6-26
F2B-DLEZ
-PCR-B2-57
-SHCR-B2-32
F2B-DLM-B6-30
LFT-DL-B6-31
SXRSXR-
LF-SXV-B9-22
sxv-
SXV-
IMPERIAL
P2B-DL-B6-10
P2B-DLEZ
-PCR-B2-48
-SHCR-B2-28
P2B-DLM-B6-18
TB-DL-B6-22
TB-DLEZ-PCR-B2-52
DL- / DLEZ- / DLMNot Recommended

UNIFIED SAF
Made to Order / Modification Required
BALL BEARING INDEX-8
FB-DL-B6-33
LF-DL-B6-32
FB-DLEZ-B2-60
Bearing Reference
Guide
BALL BEARING INDEX

HOUSING
F4B-GT-B5-35
F4B-GTEZ
-PCR-B2-62
-SHCR-B2-35
F4B-GTM-B5-42
FC-
FC-
FC-GT-B5-46
FC-GTM-B5-48
NSTU-WSTUTP-
NSTU- / WSTU- / TP-
SCHB-
HNG-
HNG-
SCHB-
CYLCYL-
E-Family Roller
Bearings
F4BF4B-
NSTU-GT/GTM
-B5-50 & 52
WSTU-GT/GTMB5-54&58
WSTU-GTEZ
-PCR-B2-66
TP-GT/GTM-B5-60&61
GT-GTM
FC-SCM-B4-68
HNG-SC-B4-86
SCHB-SC-B4-84
CYL-SC-B4-87
SC, SCM
SC- / SCM- / SL-
WSTU-VSC-B8-20
F4B-VSC-B8-16
NSTU-VSC-B8-18
VSC-
VSC-
F4B-SXR-B7-28
FC-SXR-B7-30
WSTU-SXR-B7-34
NSTU-SXR-B7-32
TP-GXR-B7-36
HNG-SXR-B7-37
SCHB-SXR-B7-38
CYL-SXR-B7-39
SXR-
SXR-
F4B-SXR-B9-24
FC-SXV-B9-28
F4B-SLX-B9-26
I
N
S
E
R
T
S
S-2000
FC-SC-B4-66
NSTU-SC-B4-70
NTSU-SCM-B4-73
TP-G-B4-82
NSTU-SCEZ-B2-38
WSTU-SCEZ
-PCR-B2-68
WSTU-SCM-B4-78
WSTU-SC-B4-74
NSTU-SXV-B9-30
WSTU-SXV-B9-32
UNISPHERE II
F4B-SC-B4-54
F4B-SCEZ
-PCR-B2-64
-SHCR-B2-36
F4B-SCM-B4-60
F4B-SL-B4-64
Specialty Tapered
Products
GT- / GTEZ- / GTM-
sxv-
FC-DL-B6-38
FC-DLM-B6-40
SCHB-DL-B6-52
CYL-DL-B6-53
DL- / DLEZ- / DLMNot Recommended

Made to Order / Modification Required
UNIFIED SAF
F4B-DL-B6-34
F4B-DLEZ
-PCR-B2-65
-SHCR-B2-37
F4B-DLM-B6-36
NSTU-DL-B6-42
NSTU-DLM-B6-44
WTSU-DLEZ
-PCR-B2-70
WSTU-DL-B6-46
WSTU-DLM-B6-48
TP-DL-B6-50
TP-DLM-B6-51
IMPERIAL
SXV-
Bearing Reference
Guide
BALL BEARING INDEX
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
Features / Benefits

Type E-Xtra. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-2
Type EXL, Pillow Block Inner Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-4
DOUBLE-INTERLOCK & Type K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-5
TAF . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-6
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-8
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-9
Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-10
Selection (Inch). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-11
Bearing Reference
Guide
Type E-Xtra/DOUBLE-INTERLOCK/Type K/TAF
E-Family Roller
Bearings
CONTENTS
Easy Selection Table - Inch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-15
Type E-Xtra
Pillow Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-22
Flanges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-26
Take-Ups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-30

Type EXL
Pillow Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-34
Inner Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-38

Type K

Pillow Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-40
Flanges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-42

Inner Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-44
S-2000
Selection/Dimensions - Inch
Specialty Tapered
Products
Engineering/Technical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-17
Take-Ups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-46
DOUBLE-INTERLOCK

Pillow Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-50
TAF

Pillow Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-58
Inner Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-62
Modification/Accessories

Type E-Xtra End Closures and E-TECT Seals . . . . . . . . . . . . . . . . . . . . . . . . . . B10-64
Type K, DOUBLE-INTERLOCK and TAF End Closures
and E-TECT Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-65
Selection - TAF Smart Bearings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-67

Easy Selection - Type E-Xtra Metric. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-68
Selection/Dimensions - Metric

Type E-Xtra - Metric. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-74
DOUBLE-INTERLOCK - Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-76
IMPERIAL
Inner Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-56
UNISPHERE II
Flanges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10-54

Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1
UNIFIED SAF
Key Word Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEYWORD-1
B10-1
Bearing Reference
Guide
FEATURES/BENEFITS
Type E-Xtra/DOUBLE-INTERLOCK/Type K/TAF/EXL
E-Family Roller
Bearings
These five product lines have many common

features and benefits that are shown on this
page. Unique features for each product are
shown on the following pages.
General Features:
The common components used by all four lines

include:
Case hardened rollers

and races
Factory assembled,
adjusted and
prelubricated
Easy installation and

maintenance
Bearings
Seals
65 degree set screw angle Springlok

collar/ flingers - more holding power
than 90 to 120 degree
Locking collars
Bore range
Specialty Tapered
Products
Triple rubber lip contacting seals
E-Xtra Tough Sealing

Importance of Sealing:
40% of mounted bearing failures in the industry involve

liquid or solid contamination or lack of adequate
lubrication
S-2000
Obstructs contaminant entry
Retains essential lubrication
Increased life equals decreased downtime
XTS Sealing System

UNISPHERE II
Standard on all Baldor Dodge Type E-Xtra, EXL, TAF,

Double Interlock and Type K Bearings
XTS Sealing
1. Collar-riding seal lip provides the first level of defense

against contaminants
2. Trash guard protects inner seals
3. Primary contact seal protects internal components and
helps retain grease
4. Contact seal for grease retention and secondary trash
guard for increased protection
IMPERIAL
5. Optional E-Tect seal kit for harsh-duty environments

UNIFIED SAF
XTS Sealing with E-Tect Option
NOTE: Instruction manuals for Dodge bearings are available on www.dodge-pt.com

B10-2
Bearing Reference
Guide
Type E-Xtra
DODGE Type E
One Bearing, One Seal
For Dusty or Damp Environments
E stands for economy
Type E allows easy upgrade from ball bearings
Comparable mounting dimensions with ball bearings
Moderate price premium vs. ball bearings
E-Family Roller
Bearings
FEATURES/BENEFITS
Specialty Tapered
Products
Steel housed pillow blocks available in selected sizes
The Original DODGE Type E Bearing,

Only Better
New Dodge manufactured bearings increase load
ratings 13-14% depending on size
New XTS seal provides added protection against
contamination
S-2000
Completely assembled, factory adjusted and properly

lubricated - shaft ready
Stocked in all configurations
Extra protection - E-TECT seal option
UNISPHERE II
Steel end covers available up to 3, 75mm
Top Angle Take-Ups

1-3/4 to 4
45 - 100mm
Pillow Block
1-3/16 to 7
35 - 180mm
Flange
1-3/16 to 4-1/2
35 - 115mm
Piloted Flange
1-3/16 to 5
35 - 125mm
B10-3
UNIFIED SAF
IMPERIAL
Center Pull Frame With

Wide Slot Take-UP
1-3/8 to 3
35 - 75mm
Bearing Reference
Guide
FEATURES/BENEFITS
Type EXL for Extended Life
E-Family Roller
Bearings
The Dodge Type EXL offers misalignment and

expansion capability by incorporating a totally
sealed inner unit into a split housing design with
standard Type E mounting dimensions.
Standard Features
XTS Triple-Lip Seal
Up to 4 of misalignment capability
Product Offering
2-Bolt Pillow Blocks: 1-3/16 - 3-1/2
4-Bolt Pillow Blocks: 2-1/4 - 5
Totally Sealed Inner Unit

High Strength Ductile Iron Housings
Specialty Tapered
Products
Available in Expansion and Non-Expansion Housings
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
B10-4
DODGE DOUBLE-INTERLOCK COMBINES DURABILITY WITH MOUNTING

FLEXIBILITY
Heavy Duty Housing
Construction Has
Proven Performance
Offers tapered roller bearing durability
in a variety of mounting styles
Flanges
1-3/16 to 5
Pillow Block
1-3/16 to 7
XTS triple lip seal standard
Bearing Reference
Guide
Type K and DOUBLE-INTERLOCK
E-Family Roller
Bearings
FEATURES/BENEFITS
Special clearances and greases

available
Self aligning
Factory assembled, adjusted and
lubricated - shaft ready
End covers available up to 5
D Unit
1-3/16 up to 5
S-2000
B-1 Unit
1-3/16 up to 5
S-1 Unit
Specialty Tapered
Products
Extra protection E-TECT Seal Option
DODGE TYPE K FITS WHERE COMPETITORS WONT

Tapered Roller Bearings With Reduced Length Thru Bore
Reduces length thru bore design in a variety of mounting styles
Single collar design saves space and installation time
UNISPHERE II
Allows bearing to be closer to the load for reduced shaft design

Self-aligning
Factory assembled, adjusted and lubricated - shaft ready
Same housing as DOUBLE-INTERLOCK
Pillow Block
Expansion & Non-Expansion
1-3/16 - 3-15/16
Flange Expansion and

Non-Expansion
1-3/16 - 3-15/16
IMPERIAL
End covers available up to 5
Wide Slot Take-Up

Frame
1-3/8 - 3
Top Angle Take-Ups

1-3/4 - 3-15/16
B10-5
UNIFIED SAF
S-1 & B-1 Units

1-3/16 - 3-15/16
Bearing Reference
Guide
FEATURES/BENEFITS
TAF
TAF IS A COST SAVING ALTERNATIVE TO SAF SPHERICAL BEARINGS
Mounts Fast, Stays Cleaner And Extends Service Life
Shaft ready - mounts six times faster than SAF
E-Family Roller
Bearings
Interchangeable with SAF style pillow blocks

Self-aligning, factory assembled, adjusted and lubricated
Available in 1-7/16 up to 7 shaft diameters
Equipped with expansion or non-expansion housing
XTS seal standard
E-TECT seal option available up to 7
Specialty Tapered
Products
Optional Smart Housings accommodate speed, vibration

and temperature sensor kits
TAF
Self-aligning provided by spherically-machined housing
S-2000
SAF
UNISPHERE II
Self-aligning provided by insert, limited by seal

interference
TAF Is Interchangeable With

SAF Mounting Dimensions
IMPERIAL
SAF
TAF
UNIFIED SAF
SAF
TAF
B10-6
Compare These DODGE TAF, Type K & DOUBLE-INTERLOCK Bearing Advantages Against
Standard SAF Pillow Blocks
Standard SAF
DODGE TAF, Type K and DOUBLE-INTERLOCK

One piece
Up to six packages
Sealed bearing
Open bearing
Factory adjusted
Feeler gauge required
Factory lubricated
Grease required
Shaft ready
Compare Standard SAF and DODGE Sealing Designs

DODGE TAF, Type K and DOUBLEINTERLOCK
Inner unit carries seal
Less than 1 static misalignment
Up to 5 static misalignment
Sealing effectiveness decreases

as misalignment increases
Seal and bearing ride

together in inner unit
Seals distort when misalignment

occurs
Seals maintain contact

on cones even with
misalignment

B10-7
IMPERIAL
Seals ride independently of

bearing
UNIFIED SAF
Standard SAF
UNISPHERE II
S-2000
Four pieces
Bearing Reference
Guide
DODGE BEARINGS SAVE YOU TIME AND MONEY
E-Family Roller
Bearings
Type K/DOUBLE-INTERLOCK/TAF
Specialty Tapered
Products
FEATURES/BENEFITS
Bearing Reference
Guide
SPECIFICATION
Type E-Xtra, Type K, DOUBLE-INTERLOCK/TAF and EXL
Type E-Xtra, Type K, DOUBLE-INTERLOCK, TAF and EXL
mounted bearings are all general purpose high capacity tapered
roller bearings capable of handling any combination of radial
and thrust load within the capacity of the bearing.
E-Family Roller
Bearings
All of these bearings are mounted to the shaft by means of set

screw collars having 65 degree set screw spacing for optimum
clamping force. The Type E-Xtra, DOUBLE-INTERLOCK, TAF
and EXL mounted bearings have locking collars at each end of
their extended inner races. Type K has a single locking collar.
The tapered roller bearings for these mounted bearings all have
case carburized inner races (cones), outer races (cups), and
rollers.
Specialty Tapered
Products
Bearings are preassembled, prelubricated and factory adjusted.

They are normally equipped with land riding contact type seals
with a metal deflector guard.
The standard housing material for most of these mounted

bearings is ASTM A48 Class 30 Iron having a minimum tensile
strength of 30,000 psi. The outer housing for the Type K and
DOUBLE-INTERLOCK flange bearings thru 4 bore size and all
Type EXL housings utilize housings made of ductile iron (ASTM
A536 Grade 65-45-12) with 65,000 psi tensile strength. Type E
pillow blocks are also available with cast steel housing having
a tensile strength of 70,000 psi for 2-bolt base thru 3-1/2 bore
size and 4-bolt base from 3-15/16 thru 5 bore size on an
assembled or order basis.
The Type K, DOUBLE-INTERLOCK pillow blocks and flange
bearings plus the TAF pillow blocks all have split outer housings
used with completely assembled, lubricated and adjusted inner
units simplifying replacement of the bearing in the pillow block
or flange bearing. All Type E mounted bearings, Type K take up
units and all D units, S-1 units, and B-1 units have solid one
piece housings.
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
HOW TO ORDER/NOMENCLATURE
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-8
ACCESSORIES
PAGE B10-64
There are two ways to specify DODGE Bearings. Most of

the product offering have part numbers with listings shown
throughout this catalog. Use of part numbers ensures accurate
order processing.
temperature greases available upon request. Special lubricant

options usually involve set-up charges and premiums. To order,
specify type of lubricant required at the end of the product name
or after the standard part number.
When part numbers are not shown, the product may be

specified by description or part name. This method is used
when ordering units that include modifications or options. To
order by description, use the nomenclature key shown on page
and add any special instructions to the end of the description
for options not covered by the nomenclature.
Example:
F4B-E-207 except with Mobil Grease HTS #2 grease and
.012 to .015 lateral end play
or
023106 except with Mobil Grease HTS #2 grease and .012
to .015 lateral end play
SPECIAL BEARING REQUIREMENTS AND SPECIAL

LUBRICANTS
Bearing Reference
Guide
Type E-Xtra, Type K, DOUBLE-INTERLOCK/TAF and EXL
E-Family Roller
Bearings
HOW TO ORDER
For applications requiring modifications not listed, we

encourage you to contact out Application Engineering
Department for Bearings at 864-284-5700.
FEATURES/BENEFITS
PAGE B10-2
EASY SELECTION
PAGE B10-15
SELECTION/DIMENSIONS
PAGE B10-22
B10-9
ACCESSORIES
PAGE B10-64
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
DODGE Bearings are factory adjusted and pre-lubricated. For

applications where extreme ambient temperatures, high speeds
or high loads are expected, a variety of specialty lubricants
and adjustments are available. Standard grease provided is
Mobilgrease XHP222, a lithium complex based grease. High
Specialty Tapered
Products
OTHER SPECIAL REQUIREMENTS NOT LISTED
Bearing Reference
Guide
NOMENCLATURE
P2B - 515-TAF - 207 - RE
E-Family Roller
Bearings
HOUSING STYLE OPTION
BEARING TYPE OPTIONS
P2B =
Pillow Block
2-Bolt, Cast Iron
E = Type E
P4B =
Pillow Block
4-Bolt, Cast Iron
EXL = Type EXL
Specialty Tapered
Products
SP2B = Pillow Block

2-Bolt, Cast Steel
K = Type K
Inches & 16TH

2 = 2 Inches
07 = 7/16 Inches
Or
207 = 2-7/16
OTHER OPTIONS
R = XTS Triple Lip Seal
E = Expansion Type Bearing.
Note: If E Does Not Appear After Seal Type, Then
Bearing Is Non-Expansion Type
DI = DOUBLE-INTERLOCK
METRIC
060M = 60
Millimeters
TAF = TAF
SP4B = Pillow Block
4-Bolt, Cast Steel
Size
5XX = Housing Series

(TAF Only)
S-2000
UNISPHERE II
F4B =
Flange Bearing
4-Bolt, Cast Iron
FC =
Piloted Flange
Bearing (Flanged Cartridge)
B1U =
B1 Unit
Cast Iron
DU =
D Unit
Cast Iron
S1U =
S-1, Unit
Cast Iron
WSTU = Wide Slot Take-Up Bearing

Cast Iron
IMPERIAL
TP =
Top Angle Take-Up Bearing

Cast Iron
H2S =
Pillow Block Housing Only

2-Bolt, Cast Iron
H4S =
Pillow Block Housing

4-Bolt, Cast Iron
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
EASY SELECTION
PAGE B10-15
PAGE B10-22
B10-10
ACCESSORIES
PAGE B10-64
L10 Hours Life --- The life which may be expected from at least
90% of a given group of bearings operating under identical
conditions.
L10 =
( CP )
90 10/3
1,500,000
RPM
Where: C90 = Dynamic Capacity (Table 1, pg. B10-13), lbs.

P = Equivalent Radial Load, lbs.
GENERAL
Heavy Service --- For heavy shock loads, frequent shock loads,
or severe vibrations, add up to 50% (according to severity of
conditions) to the Equivalent Radial Load. Consult DODGE
Application Engineering for additional selection assistance.
Recommended
Thrust Load
20-200
201 - 2000
Over 2000
E, DI, TAF
C90/4
C90/8
C90/12
C90/5
C90/8
C90/12
The shaft tolerances recommended below are adequate for

normal radial and radial/thrust load applications. The radial
load is limited by the attachment to the shaft (see Table 1).
Where the applied radial load (FR) exceeds this limit (maximum
allowable slip fit radial load), a snug-to-light press fit of the shaft
is required. Since the allowable load, especially at a low speed,
is very large, the shaft should be checked to assure adequate
shaft strength.
The magnitude and direction of both the thrust and radial load
must be taken into account when selecting a housing. When
pillow blocks are utilized, heavy loads should be directed
through the base. Where uplift loads are involved, see Tables
6, 7, and, pg. B10-19 for maximum values. Where a load pulls
the housing away from the mounting base, both the hold-down
bolts and housing must be of adequate strength. Auxiliary load
carrying devices such as shear bars are advisable for side or
end loading of pillow blocks and radial load for flange units.
Shaft Size
UP TO 1-1/2
1-5/8 TO 4
4-7/16 TO 6
6-7/16 - 8
Tolerance, Inches
+.0000 -.0005
+.000 -.001
+.000 -.0015
+.000 -.002
NOTE: The L10 life calculated using the above formula is

subject to life adjustment factors in accordance with

ABMA standards described on page B16-9.
Bearing Reference
Guide
E-Family Roller
Bearings
RPM Range

FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-11
ACCESSORIES
PAGE B10-64
UNIFIED SAF
IMPERIAL
Thrust load values shown in the table below are recommended

as a guide for general applications that will give adequate L10 life
for pillow blocks. The maximum thrust load should not exceed
values shown on Table 3. Where substantial radial load is also
present, it is advisable to calculate actual L10 life to assure
that it meets the requirements. The effectiveness of the shaft
attachment to carry thrust load depends on proper tightening of
the setscrews, shaft tolerance and shaft deflections. Therefore,
it is advisable to use auxiliary thrust carrying devices such as

shaft shoulder, snap ring or a thrust collar to locate the bearing
under thrust loads heavier than shown below, or where extreme
reliability is desired.
Specialty Tapered
Products
DODGE Type E-Xtra, K, DI, TAF and EXL Double Row Tapered
Roller Bearings have the capacity to carry heavy radial
loads and combined radial and thrust loads. The maximum
recommended load which can be applied is limited by various
components in the system such as bearing, housing, shaft,
shaft attachment, speed and life requirements as listed in this
catalog. DODGE tapered roller bearings have been applied
successfully even when these limits have been exceeded under
controlled operating conditions. Contact DODGE Application
Engineering (864) 284-5700 for applications which exceed the
recommendations of this catalog.
S-2000
Type E-Xtra, Type K, DOUBLE-INTERLOCK,TAF and EXL Tapered Roller

Bearings
UNISPHERE II
SELECTION
Bearing Reference
Guide
SELECTION
Type E-Xtra, Type K, DOUBLE-INTERLOCK, TAF and EXL Tapered Roller
Bearings
SELECTING BEARINGS SUPPORTING RADIAL LOADS
ONLY
E-Family Roller
Bearings
1. Define L10 Life Hours desired.

2. Establish bearing radial load, FR (FR = P for Pure Radial

Load Conditions). The DODGE program BEST* can be

used to find application loads.
3. Establish RPM.
Specialty Tapered
Products
Using the easy selection Table 3, pg B10-15 find, under the

RPM column, the equivalent radial load that equals or is higher
than the application radial load for the desired life. The shaft size
on the far left will be the minimum shaft size that you can use
for your application. If the desired life is different than the values
shown on the chart, use alternate Method A shown below.
Example: 1. L10 Life = 30,000 Hours

2. Radial load = 4200 lbs.

3. RPM = 1,200
S-2000
At the intersection of the 1,200 RPM column and the 30,000

hours L10 life row, the equivalent radial load of 4286 lbs. exceeds
the 4200 lbs. radial load for shaft sizes 2-11/16 - 3. A bearing
with bore ranging from
2-11/16 to 3 may be used for this application.
ALTERNATE METHOD A --SELECTING A BEARING FOR AN L10 LIFE VALUE NOT

SHOWN IN THE EASY SELECTION CHART.
UNISPHERE II
The L10 life equation can be rearranged so that the bearing

dynamic capacity C90 is identified in terms of L10, RPM and P.
C90 =
L10 x RPM
1,500,000
0.3
x P
(P = FR for Pure Radial Load Conditions)

Since the L10, RPM, and P are known, solve for C90. Select
from the dynamic capacity column on Table 2, pg B10-14. The
C90 value equal to or greater than the C90 value just calculated.
The bore size on the far left represents the bore size selection.
Check that the application RPM does not exceed the MAX. RPM
on Table 2. Also check that the radial load does not exceed
the Maximum Allowable Slip Fit Radial Load shown on Table
2. If it does, a line to line to light press fit of shaft is required.
When selecting an L10 life of less than 30,000 hours, particular
attention must be paid to shaft deflection and proper lubricant
selection.
SELECTING BEARINGS SUPPORTING COMBINATION
RADIAL AND THRUST LOADS
When a bearing supports both a radial load and a thrust load,
the loading on the two rows is shared unequally depending on
the ratio of thrust to radial load. The use of the X (radial factor)
and Y (thrust factor) from Table 2 converts the applied thrust
load and radial loads to an equivalent radial load having the
same effect on the life of the bearing as a radial load of this
magnitude.
The equivalent radial load P = XFR +YFA
Where: P= Equivalent radial load, lbs.
FR= Radial load, lbs. (see Table 2 for allowable

slip fit maximum)
FA= Thrust (axial) load, lbs.
e = Thrust load to radial load factor (Table 2)

X = Radial load factor (Table 2)

Y= Thrust load factor (Table 2)
To find X and Y, calculate FA/FR and compare to e for the
selected bore size. Determine X and Y from Table 2, pg. B10-14
depending on whether FA/FR is equal to or less than e, or FA/FR
is greater than e. Substitute all known values into the equivalent
radial load equation. P (equivalent radial load) can be used in
the life formula to determine L10, or it can be compared to the
allowable equivalent radial load ratings for the speed and hours
life desired in the easy selection Table 3, pg B10-15.
*The DODGE Bearing Evaluation and Selection Technique
(BEST) is a menu driven computer program that calculates
bearing loads, fatigue life and operating temperature for a two
bearing shaft system based on user supplied input parameters.
This interactive program is available at www.ptwizard.com under
the Product Selection area.
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-12
ACCESSORIES
PAGE B10-64
Relubrication Schedule
Suggested Lubrication Period In Weeks
751 to
1001 to
1501 to
1000 RPM
1500 RPM
2000 RPM
Hours
Run per
Day
1 to 250
RPM
251 to
500 RPM
501 to
750 RPM
8
16
12
12
12
7
10
5
7
4
5
2
24
10
High Speed Operation --- In the higher speed ranges too much
grease will cause overheating. The amount of grease that the
bearing will take for particular high speed application can only
be determined by experience --- see Operating Temperature
below. If excess grease in the bearing caused overheating,
it will be necessary to remove grease fitting (also drain plug
when furnished) to permit excess grease to escape. When
establishing a relubrication schedule, note that a small amount
of grease at frequent intervals is preferable to a large amount at
infrequent intervals.
Operation in Presence of Dust, Water or Corrosive Vapors
--- Under these conditions the bearing should contain as much
grease as speed will permit, since a full bearing with consequent
slight leakage is the best protection against entrance of foreign
material. In the higher speed ranges too much grease will cause
overheating --- see High Speed Operation. In the lower speed
ranges, it is advisable to add extra grease to a new bearing
before putting into operation. Bearings should be greased as
2001 to
2500 RPM
2501 to
3000 RPM
4
2
3
2
2
1
often as necessary (daily if required) to maintain a slight leakage

at the seals.
INSTALLATION AND MAINTENANCE

In nearly all applications good design practice requires two
bearings supporting the shaft. In cases where three or more
bearings are installed, unless precautions are taken to line the
bearings up, both vertically and horizontally, it is possible to
induce heavy loads. In the case of two bearings, alignment
is not as critical, especially with DODGE K, DI,TAF and EXL
Tapered Roller Bearings. K, DI, and TAF bearings are designed
to allow as much as 2 to 7 of static misalignment depending
on bore size. To ensure good alignment, mounting surfaces
must be checked for flatness and must lie in the same plane.
When tightening base bolts and cap bolts, each bolt should
be alternately tightened in incremental torque values until full
torque is achieved to prevent the angular shifting of the pillow
block that occurs when one bolt is tightened to its full torque.
Shimming may be required to minimize misalignment..
Table 1 - Set Screw Torque Table

Shaft Size
(Inches)
1-3/16 - 1-11/16
1-3/4 - 2-1/2
2-11/16 - 3-1/2
3-15/16 - 5
5-7/16 - 6
6-7/16 - 7
FEATURES/BENEFITS
PAGE B10-2
Set Screws Size
Tightening Torque
5/16 - 18
3/8 - 16
1/2 - 13
5/8 - 11
3/4 - 10
7/8 - 9
165 in-lbs
290 in-lbs
620 in-lbs
1325 in-lbs
2150 in-lbs
5130 in-lbs
Shaft Size
(mm)
35 - 40mm
45 - 65mm
70 - 75mm
80 - 90mm
100 - 125mm
PAGE B10-9
PAGE B10-22
B10-13
Set Screws Size
Tightening Torque
M8
M10
M12
M12
M16
17.8 NM
35 NM
57 NM
57 NM
126 NM
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
E-Family Roller
Bearings
Specialty Tapered
Products
DODGE E, K, DI, EXL, and TAF tapered roller bearings up to

5 bore are lubricated at the factory with Mobilgrease XHP222
grease. This grease will adequately handle low and medium
speeds with low and medium loads at normal temperatures as
defined on Table 6, pg. B10-18. For very low and high speeds,
for heavy loads and for low and high temperatures, special
greases must be used. Contact DODGE Application Engineering
(864) 284-5700. DODGE engineers will recommend bearings
and lubricants for the above unusual conditions. DODGE also
has the expertise to custom design and build special bearings
for your needs. The only maintenance requirement for DODGE
Tapered Roller Bearings is periodic relubrication at regular
intervals as outlined in the appropriate instruction manuals.
Tapered Roller Bearings perform extremely well under pure

thrust load applications. Use P = YFA for the equivalent radial
load. The value of Y is obtained from Table 2, pg. B10-14 for
FA/FR>e. Substitute Y and FA into the equivalent load equation.
P (equivalent radial load) can be used in the life formula to
determine L10 or it can be compared to the allowable equivalent
radial load ratings for the speed and hours life desired in the
easy selection Table 3, pg. B10-15.
S-2000
LUBRICATION
UNISPHERE II
SELECTING BEARINGS SUPPORTING ONLY THRUST

LOADS
IMPERIAL
Type E-Xtra, Type K, DOUBLE-INTERLOCK,TAF and EXL Tapered Roller Bearings
UNIFIED SAF
SELECTION
Bearing Reference
Guide
SELECTION
Table 2 - E, K, DI, TAF and EXL Tapered Roller Bearing Radial And Thrust Factors
Shaft
Size
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
5-7/16
5-15/16
6
6-7/16
6-1/2
6-15/16
7
FA/FR<e
FA/FR>e
Dynamic
Capacity
C90
Static
Capacity
CO
Maximum
RPM
Maximum
RPM
Maximum Allowable
Slip Fit Radial Load,
FR **, Lbs
E, DI, EXL
K
& TAF
Lbs.
Lbs.
XTS-SEAL
E-TECT
0.49
0.87
1.77
0.70
2.14
3,450
15,760
4,490
3,100
3,100
2,100
0.46
0.87
1.89
0.70
2.28
5,500
26,000
3,820
2,675
5,000
3,300
0.44
0.87
1.96
0.70
2.37
7,070
33,000
3,320
2,325
6,400
4,300
0.33
0.87
2.64
0.70
3.18
9,300
43,000
3,050
2,135
8,400
5,600
0.36
0.87
2.38
0.70
2.87
9,850
48,200
2,730
1,900
8,900
5,900
0.40
0.87
2.17
0.70
2.63
10,600
54,000
2,420
1,700
9,500
6,300
0.46
0.87
1.87
0.70
2.26
11,120
61,200
2,060
1,440
10,000
6,700
0.50
0.87
1.71
0.70
2.07
17,750
108,600
1,640
1,145
16,000
10,500
0.49
0.87
1.77
0.70
2.14
24,400
154,000
1,530
1,070
22,000
14,600
0.53
0.87
1.63
0.70
1.97
30,000
188,400
1,360
950
27,000
----
0.47
0.87
1.83
0.70
2.21
41,310
266,000
1,200
840
35,000
----
0.49
0.87
1.76
0.70
2.12
40,700
354,000
915
640
42,400
----
0.54
0.87
1.61
0.70
1.95
69,200
574,000
790
550
72,000
----
IMPERIAL
Comparing Spherical To Taper Roller Bearings: The dynamic capacity

C (spherical) and C90 (taper) are not to the same base. To compare basic
dynamic capacities, multiply C x .259 and compare to C90.
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
*C90 - Dynamic capacity based on a rated life of 90 million revolutions or 3000 hours at 500
RPM.
** If load exceeds maximum allowable slip fit radial load, (FR), line-to-line, to light press fit of
shaft required. Application up to maximum slip fit radial load may be applied if recommended
shaft tolerances are used.
PAGE B10-9
PAGE B10-22
B10-14
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
Table 3 - Easy Selection for Type E-Xtra, Type K, TAF and EXL
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-15/16
4
100
150
250
500
790
915
1200
1360
1530
1640
1750
2060
2420
2730
3050
3320
3600
3820
4490
10000
4797
3896
3450
2960
2404
2096
2005
1849
1781
1719
1683
1651
1572
1498
1445
1398
1362
1330
1306
1244
30000
3450
2802
2481
2129
1729
1507
1442
1330
1281
1236
1211
1187
1131
1077
1039
1005
980
956
939
895
40000
3165
2571
2276
1953
1586
1383
1323
1220
1175
1134
1111
1089
1037
988
953
922
899
877
862
821
60000
2802
2276
2015
1729
1404
1224
1172
1080
1040
1004
983
964
918
875
844
816
796
777
763
727
100000
2404
1953
1729
1483
1205
1050
1005
927
892
861
844
827
788
751
724
700
683
666
655
624
10000
7647
6211
5500
4719
3833
3341
3197
2947
2839
2740
2684
2632
2506
2388
2303
2228
2172
2120
2082
30000
5500
4467
3956
3394
2757
2403
2299
2120
2042
1971
1930
1893
1803
1718
1657
1602
1562
1525
1498
40000
5045
4098
3629
3113
2529
2204
2109
1945
1873
1808
1771
1736
1654
1576
1520
1470
1433
1399
1374
60000
4467
3629
3213
2757
2239
1952
1868
1722
1658
1601
1568
1538
1464
1395
1346
1302
1269
1238
1217
100000
3833
3113
2757
2365
1921
1675
1602
1477
1423
1373
1345
1319
1256
1197
1154
1117
1089
1062
1044
10000
9830
7984
7070
6065
4927
4295
4110
3789
3649
3522
3450
3383
3222
3070
2961
2864
2792
30000
7070
5743
5085
4362
3543
3089
2956
2725
2625
2533
2481
2433
2317
2208
2129
2060
2008
40000
6485
5268
4664
4002
3250
2834
2711
2500
2408
2324
2276
2232
2126
2025
1953
1889
1842
60000
5743
4664
4130
3543
2878
2509
2401
2213
2132
2058
2015
1976
1882
1793
1730
1673
1631
100000
4927
4002
3543
3040
2469
2153
2060
1899
1829
1765
1729
1696
1615
1539
1484
1435
1399
10000
12931 10503
9300
7979
6481
5650
5406
4984
4800
4633
4538
4450
4238
4038
3895
3767
30000
9300
7554
6689
5738
4661
4063
3888
3584
3452
3332
3264
3201
3048
2904
2801
2709
40000
8531
6929
6136
5264
4276
3727
3567
3288
3167
3057
2994
2936
2796
2664
2569
2485
60000
7554
6136
5433
4661
3786
3300
3158
2911
2804
2707
2651
2600
2476
2359
2275
2201
100000
6481
5264
4661
3999
3248
2832
2709
2498
2406
2322
2274
2230
2124
2024
1952
1888
10000
13695 11124
9850
8450
6864
5984
5726
5278
5084
4907
4806
4714
4489
4277
4125
30000
9850
8001
7084
6078
4937
4304
4118
3796
3656
3530
3457
3390
3228
3076
2967
40000
9036
7339
6499
5575
4529
3948
3778
3483
3354
3238
3171
3110
2961
2822
2721
60000
8001
6499
5754
4937
4010
3496
3345
3084
2970
2867
2808
2754
2622
2498
2410
100000
6864
5575
4937
4235
3440
2999
2870
2646
2548
2460
2409
2362
2250
2143
2067
10000
14738 11971 10600
9094
7387
6439
6162
5680
5471
5281
5172
5072
4830
4602
30000
10600
8610
7624
6541
5313
4631
4432
4085
3935
3798
3720
3648
3474
3310
40000
9724
7898
6993
6000
4873
4248
4065
3748
3610
3484
3412
3347
3187
3036
60000
8610
6993
6192
5313
4315
3762
3600
3318
3196
3085
3022
2963
2822
2689
100000
7387
6000
5313
4558
3702
3227
3088
2847
2742
2647
2592
2542
2421
2307
10000
15461 12558 11120
9540
7749
6755
6464
5959
5739
5540
5426
5321
5067
30000
11120
9032
7998
6861
5573
4859
4649
4286
4128
3985
3902
3827
3644
40000
10201
8285
7336
6294
5112
4457
4265
3932
3787
3655
3580
3511
3343
60000
9032
7336
6496
5573
4527
3946
3776
3481
3353
3237
3170
3109
2960
100000
7749
6294
5573
4781
3884
3386
3240
2987
2877
2777
2719
2667
2540
10000
24679 20046 17750 15228 12369 10783
10318
9512
9161
8843
8661
30000
17750 14417 12766 10952
8896
7755
7421
6841
6589
6360
6229
40000
16282 13225 11711
10047
8160
7114
6807
6276
6044
5834
5714
60000
14417 11711
10369
8896
7226
6299
6028
5557
5352
5166
5060
100000
12369
8896
7632
6199
5404
5171
4767
4592
4432
4341
10000
33925 27556 24400 20933 17003 14823
30000
24400 19819 17549 15056
40000
22382 18180 16098
60000
19819 16098
100000
17003
10047
14184 13076 12594 12157
12229 10661 10201
13811 11218
S-2000
1-3/8
1-7/16
50
UNISPHERE II
1-3/8
1-1/4
Allowable Equivalent Radial Load (Lbs.) at various Revolutions Per Minute
L10
hours
9404
9058
8743
9779
9358
8627
8309
8020
14254 12229
9933
8659
8286
7639
7357
7102
13811 12229 10491
8522
7429
7109
6553
6312
6093
IMPERIAL
Shaft
Size
E-Family Roller
Bearings
Specialty Tapered
Products
SELECTION
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-15
ACCESSORIES
PAGE B10-64
UNIFIED SAF
For maximum RPM see Table 2 on page B10-14

In the shaded area, E, DI, EXL, and TAF mounted units require a line-to-line to light press fit of shaft
In the boxed area, Type K mounted units require a line-to-line to light press fit of shaft.
Bearing Reference
Guide
SELECTION
Table 3 - Easy Selection for Type E-Xtra, Type K, TAF and EXL
Shaft
Size
E-Family Roller
Bearings
4-7/16
4-1/2
4-15/16
5
Specialty Tapered
Products
5-7/16
5-15/16
6
6-7/16
6-1/2
6-15/16
7
L10
hours
Allowable Equivalent Radial Load (Lbs.) at various Revolutions Per Minute

50
100
150
250
500
790
915
1200
1360
10000
41712 33880 30000 25738 20905 18225 17439 16077 15484
30000
30000 24368 21577 18511 15036 13108 12543 11563 11137
40000
27519 22353 19793 16980 13792 12024 11505 10607 10216
60000
24368 19793 17526 15036 12213 10647 10188
9392
9046
100000
20905 16980 15036 12899 10477
8057
7760
10000
57437 46653 41310 35441 28787 25095 24014 22137
30000
41310 33554 29711 25490 20704 18049 17271 15922
40000
37894 30780 27254 23382 18992 16557 15843 14605
60000
33554 27254 24133 20704 16817 14661 14028 12933
100000
28787 23382 20704 17762 14428 12578 12035 11095
10000
56589 45964 40700 34917 28362 24725 23659
30000
40700 33059 29272 25113 20398 17783 17016
40000
37335 30325 26852 23037 18712 16312 15609
60000
33059 26852 23777 20398 16569 14444 13821
100000
28362 23037 20398 17500 14214 12392 11858
10000
96215 78151 69200 59368 48222 42038
30000
69200 56208 49770 42699 34682 30235
40000
63478 51560 45655 39168 31814 27735
60000
56208 45655 40426 34682 28171 24558
100000
48222 39168 34682 29754 24168 21069
9134
8740
1530
1640
1750
2060
2420
2730
3050
3320
3600
S-2000
For maximum RPM see Table 2 on page B10-14

In the shaded area, E, DI, EXL, and TAF mounted units require a line-to-line to light press fit of shaft
In the boxed area, Type K mounted units require a line-to-line to light press fit of shaft.
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-16
ACCESSORIES
PAGE B10-64
3820
4490
Bearing Reference
Guide
SELECTION
Type E-Xtra, DOUBLE-INTERLOCK, TAF and EXL
Table 4 - Permissible Thrust Load, Lbs.*
*K/DI, TAF, EXL
E-Family Roller
Bearings
4-Bolt
3454
3454
3454
5181
5181
5181
5181
5181
5181
5181
5181
6908
6908
6908
6908
6908
6908
8635
8635
8635
12282
12282
12282
12282
Does not include Piloted Flange

Piloted Flange up to and including 3-1/2 and all sizes of Type K only have one setscrew locking collar and therefore the above listed
permissible thrust load values must be decreased by 1/2.
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-17
Specialty Tapered
Products
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
3454
2-7/16
3454
2-1/2
3454
2-11/16
5181
2-3/4
5181
2-15/16
5181
3
5181
3-3/16
5181
3-1/4
5181
3-7/16
5181
3-1/2
5181
3-15/16
6908
4
6908
4-7/16
6908
4-1/2
6908
4-15/16
6908
5
6908
5-7/16
8635
5-15/16
8635
6
8635
6-7/16
12282
6-1/2
12282
6-15/16
12282
7
12282
Note: The limits above apply to set screw shaft mounting or pillow block over turning force. Under heavy thrust loads it is always wise to use

shear bars. At all times, the L10 life of the bearing should be checked for proper selection and life requirements. For thrust loads larger than

listed or heavy thrust loading on other style housing, contact DODGE Engineering for recommendations.
S-2000
2-Bolt
1400
1400
2590
2590
2590
2590
2590
3454
3454
3454
3454
3454
3454
3454
3454
5181
5181
5181
5181
4300
4300
4300
4300
UNISPHERE II
4-Bolt
IMPERIAL
*E
2-Bolt
2000
2000
2590
2590
2590
2590
2590
3454
3454
3454
3454
3454
3454
3454
3454
5181
5181
5181
5181
5181
5181
5181
5181
ACCESSORIES
PAGE B10-64
UNIFIED SAF
Shaft Size Inches
Bearing Reference
Guide
SELECTION
Table 5 - K, DI and TAF Maximum Axial Expansion (Inches)
E-Family Roller
Bearings
Bore Size
(Inches)
Specialty Tapered
Products
1-3/16 - 1-1/4
1-3/8 - 1-7/16
1-1/2 - 1-11/16
1-3/4 - 2
2-3/16
2-1/4 - 2-1/2
2-11/16 - 3
3-3/16 - 3-1/2
3-15/16 - 4
4-7/16 - 4-1/2
4-15/16 - 5
5-7/16 - 6
6-7/16 - 7
Type K
DOUBLE-INTERLOCK
Pillow Block
0.252
0.188
0.188
0.562
0.562
0.562
0.562
0.562
0.674
0.674
0.674
0.500
0.500
Flange
-0.187
0.187
0.187
0.187
0.312
0.312
0.312
0.312
0.812
0.812
---
TAF
EXL
-0.188
0.188
0.562
0.562
0.562
0.562
0.562
0.674
0.674
0.674
0.875
0.875
.280
.280
.280
.280
.280
.280
.280
.280
.280
.280
.280
---
S-2000
Table 6 - Definition Of Operating Conditions For Tapered Roller Bearings
UNISPHERE II
LOW SPEED
MEDIUM SPEED
HIGH SPEED
LIGHT LOAD
NORMAL LOAD
HEAVY LOAD
LOW TEMPERATURE
MEDIUM TEMPERATURE
HIGH TEMPERATURE
VERY HIGH TEMPERATURE
UP TO 20% OF MAX. RPM (TABLE 1)

OVER 20% TO 80% OF MAX. RPM
OVER 80% OF MAX. RPM
UP TO 30% OF C90 (TABLE 1)
OVER 30% TO 70% OF C90
OVER 70% OF C90
-100F TO 20F
OVER 20F TO 200F
OVER 200F TO 300F
OVER 300F TO 400F
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-18
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
SELECTION
Type E-Xtra
E-Family Roller
Bearings
180
Specialty Tapered
Products
0
Table 7 - Housing Ratings - Type E-Xtra (Solid Housing)
S-2000
1-3/16 - 1-1/4
1-3/8 - 1-7/16
1-1/2 - 1-11/16
1-3/4 - 2
2-3/16
2-1/4 - 2-1/2
2-11/16 - 3
3-3/16 - 3-1/2
3-15/16 - 4
4-7/16 - 4-1/2
4-15/16 - 5
5-7/16 - 6
6-7/16 - 7
Maximum Recommended Housing Cap

Loads, Lbs.
Gray Iron
180
1,600
3,150
3,000
5,150
3,500
6,550
7,000
15,700
16,250
21,000
22,860
43,600
46,000
*When utilizing heavy cap loads on pillow block housings, the installation must adhere to the following procedures.
UNISPHERE II
Shaft
Size
(Inches)
1. The pillow block base bolts must be of Grade 8 strength with hardened washers and properly tightened to the mounting structure.
2. The use of stop bars (shear strips) against pillow block where side loads are encountered
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-19
ACCESSORIES
PAGE B10-64
UNIFIED SAF
IMPERIAL
3. In all cases where loads are heave, the L10 life of the bearing should be checked for proper selection and life requirements
Bearing Reference
Guide
SELECTION
Type K, DOUBLE-INTERLOCK, TAF and EXL
E-Family Roller
Bearings
Specialty Tapered
Products
Table 8: Housing Ratings

Type K, DI, and EXL Housing (Split Housing)
Shaft
Size
(Inches)
S-2000
UNISPHERE II
1-3/16 - 1-1/4
1-3/8 - 1-7/16
1-1/2 - 1-11/16
1-3/4 - 2
2-3/16
2-1/4 - 2-1/2
2-11/16 - 3
3-3/16 - 3-1/2
3-15/16 - 4
4-7/16 - 4-1/2
4-15/16 - 5
5-7/16 - 6
6-7/16 - 7
Table 9: Housing Ratings

TAF (Split Housing)
Maximum Recommended
Housing Cap Loads, Lbs.
180
Shaft
Size
(Inches)
4,300
5,060
5,940
8,660
10,100
10,100
11,220
16,170
19,580
20,130
24,530
35,200
56,000
Maximum Recommended
Housing Cap Loads, Lbs.
180
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16 - 2-1/2
2-15/16 - 3
3-7/16 - 3-1/2
3-15/16 - 4
4-7/16 - 4-1/2
4-15/16 - 5
5-7/16 - 6
6-7/16 - 6-1/2
6-15/16 - 7
4,600
5,400
7,875
9,200
9,220
10,200
14,700
17,800
18,300
22,300
30,000
30,000
48,000
*When utilizing heavy cap loads on pillow block housings, the installation must adhere to the following procedures.
1. The pillow block base bolts must be of Grade 8 strength with hardened washers and properly tightened to the mounting structure.
2. The use of stop bars (shear strips) against pillow block where side loads are encountered
3. In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and life requirements
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-20
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
MOUNTED BEARINGS
APPLICATION DATA SHEET
Instructions: Complete all applicable information and Fax to DODGE 864-281-2317 or e-mail brgpttechsupport@baldor.com
E-Family Roller
Bearings
DIST. USER OEM

Company
Date
Name
Phone
Specialty Tapered
Products
Address
Fax
Type of Equipment (sketch drive on separate sheet)

Service Conditions:

Shaft Speed:
Normal
Loads:
Shaft Size:
Duty Cycle: Hours/Day
Maximum
Radial
Thrust
Shock (frequency)
Shaft Tolerance (specify if not commercial)

Days/Week
Weeks/Year
Environment:
Ambient Temperature:
External Heat:
Summer
Winter
Temperature
Air:
Clean
Contaminated
Contamination Type
Gas:
Clean
Contaminated
Contamination Type
Liquid:
Type
Other:
(Including washdowns)
S-2000
Source of Heat
Distance from Bearing
Concentration
Type of Bearing Currently Used:
Life Realized
UNISPHERE II
Experience: (If applicable)

Type of Failure
Other Pertinent Data
L-10 Hours Required:

IMPERIAL
Centerline Height
Bolt Pattern
Other
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-21
ACCESSORIES
PAGE B10-64
UNIFIED SAF
Dimensional Restrictions:
Bearing Reference
Guide
Type E-Xtra Pillow Block - Inch
2-BOLT BASE
30
E-Family Roller
Bearings
Specialty Tapered
Products
J1
F BOLT DIA.
M
H
D MIN
D MAX
S-2000
UNISPHERE II
A
J
IMPERIAL
C
3-3/16 THRU 3-12 CONSTRUCTION
1-3/16 THRU 3 CONSTRUCTION

UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-22
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
2-BOLT BASE
Cast Steel
Weight
Lbs
SP2B-E-103R
SP2B-E-104R
SP2B-E-106R
SP2B-E-107R
SP2B-E-108R
SP2B-E-110R
SP2B-E-111R
SP2B-E-112R
SP2B-E-114R
SP2B-E-115R
SP2B-E-200R
SP2B-E-203R
SP2B-E-204R
SP2B-E-207R
SP2B-E-208R
SP2B-E-211R
SP2B-E-212R
SP2B-E-215R
SP2B-E-300R
SP2B-E-303R
SP2B-E-304R
SP2B-E-307R
SP2B-E-308R
4
4
7
7
10
10
10
11
11
11
11
14
19
19
19
26
26
26
26
44
44
44
44
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
Part
Name
F
Bolt
Dia
J1
Min
Max
4.75
4.81
1/2
0.59
0.88
3.00
3.28
2.25
1.50
5.63
5.88
1/2
0.75
1.13
3.75
4.00
2.75
1.88
6.13
6.38
1/2
0.75
1.25
4.25
4.47
3.19
2.13
6.88
7.13
5/8
0.88
1.31
4.50
4.69
3.44
2.25
7.63
7.88
5/8
0.88
1.50
5.00
5.17
3.75
2.50
8.38
8.63
5/8
0.88
1.63
5.50
5.63
4.06
2.75
9.31
9.69
3/4
1.00
1.88
6.25
6.34
4.72
3.13
10.81
11.19
7/8
1.19
2.25
7.50
7.50
5.50
3.75
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-23
ACCESSORIES
PAGE B10-64
UNISPHERE II
Shaft
Part
Size
Number
Inches #
1-3/16
023047
1-1/4
023048
1-3/8
023049
1-7/16
023050
1-1/2
023051
1-5/8
023052
1-11/16
023053
1-3/4
023054
1-7/8
023055
1-15/16
023056
2
023057
2-3/16
023058
2-1/4
023059
2-7/16
023060
2-1/2
023061
2-11/16
023062
2-3/4
023063
2-15/16
023064
3
023065
3-3/16
023066
3-1/4
023067
3-7/16
023068
3-1/2
023069
# Consult DODGE For Sizes Not Listed
IMPERIAL
P2B-E-103R
P2B-E-104R
P2B-E-106R
P2B-E-107R
P2B-E-108R
P2B-E-110R
P2B-E-111R
P2B-E-112R
P2B-E-114R
P2B-E-115R
P2B-E-200R
P2B-E-203R
P2B-E-204R
P2B-E-207R
P2B-E-208R
P2B-E-211R
P2B-E-212R
P2B-E-215R
P2B-E-300R
P2B-E-303R
P2B-E-304R
P2B-E-307R
P2B-E-308R
Shaft
Size
A
B
C
(Inches)
1-3/16
2.75
6.00
1.88
1-1/4
1-3/8
3.00
7.38
2.13
1-7/16
1-1/2
1-5/8
3.38
7.88
2.38
1-11/16
1-3/4
1-7/8
3.50
8.88
2.50
1-15/16
2
2-3/16
3.75
9.63
2.63
2-1/4
2-7/16
4.00
10.50
2.88
2-1/2
2-11/16
2-3/4
4.50
12.00
3.00
2-15/16
3
3-3/16
3-1/4
5.00
14.00
3.50
3-7/16
3-1/2
NOTE: All sizes use a 1/8-27 NPT hydraulic grease fitting
FEATURES/BENEFITS
PAGE B10-2
Weight
Lbs
(Approx)
4
4
7
7
10
10
10
12
12
12
12
15
21
20
20
29
28
27
27
48
47
46
45
Part
Name
UNIFIED SAF
Gray Iron
Shaft
Part
Size
Number
Inches #
1-3/16
023000
1-1/4
023001
1-3/8
023002
1-7/16
023003
1-1/2
023004
1-5/8
023005
1-11/16
023006
1-3/4
023007
1-7/8
023008
1-15/16
023009
2
023010
2-3/16
023011
2-1/4
023012
2-7/16
023013
2-1/2
023014
2-11/16
023015
2-3/4
023016
2-15/16
023017
3
023018
3-3/16
023019
3-1/4
023020
3-7/16
023021
3-1/2
023022
Bearing Reference
Guide
4-BOLT BASE
30 *
G
E-Family Roller
Bearings
E
J1
F BOLT DIA.
M
Specialty Tapered
Products
H
D MIN
D MAX
B
S-2000
UNISPHERE II
2-1/4" THRU 3" CONSTRUCTION
IMPERIAL
C
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-24
ACCESSORIES
PAGE B10-64
2-1/4
023023
2-7/16
023024
2-1/2
023025
2-11/16
023026
2-3/4
023027
2-15/16
023028
3
023029
3-3/16
023030
3-1/4
023031
3-7/16
023032
3-1/2
023033
3-15/16
023690
4
023691
4-7/16
023692
4-1/2
023693
4-15/16
023694
5
023695
5-7/16
023040
5-15/16
023041
6
023042
6-7/16
023043
6-1/2
023044
6-15/16
023045
7
023046
Bearing Reference
Guide
Part
Name
P4B-E-204R
P4B-E-207R
P4B-E-208R
P4B-E-211R
P4B-E-212R
P4B-E-215R
P4B-E-300R
P4B-E-303R
P4B-E-304R
P4B-E-307R
P4B-E-308R
P4B-E-315R
P4B-E-400R
P4B-E-407R
P4B-E-408R
P4B-E-415R
P4B-E-500R
P4B-E-507R
P4B-E-515R
P4B-E-600R
P4B-E-607R
P4B-E-608R
P4B-E-615R
P4B-E-700R
20
20
19
30
28
28
28
47
47
46
45
69
69
85
85
134
133
230
250
245
356
350
340
335
Shaft
Size
A
B
C*
Min
Inches
2-1/4
2-7/16
4.00
10.50
3.50
8.31
2-1/2
2-11/16
2-3/4
4.50
12.00
4.00
9.19
2-15/16
3
3-3/16
3-1/4
5.00
13.50
4.50
10.75
3-7/16
3-1/2
3-15/16
15.25
4.50
12.25
6.25
4
4-7/16
16.63
4.63
13.25
6.75
4-1/2
4-15/16
18.50
5.13
15.25
7.25
5
5-7/16
5-15/16
9.00
22.00
6.25
17.38
6
6-7/16
6-1/2
10.50
26.00
7.13
21.25
6-15/16
7
FEATURES/BENEFITS
PAGE B10-2
Shaft
Size
Inches #
Part
Number
2-1/4
---------2-7/16
---------2-1/2
---------2-11/16
---------2-3/4
---------2-15/16
---------3
---------3-3/16
---------3-1/4
---------3-7/16
---------3-1/2
---------3-15/16
023070
4
023071
4-7/16
023072
4-1/2
023073
4-15/16
023074
5
023075
5-7/16
---------5-15/16
---------6
---------6-7/16
---------6-1/2
---------6-15/16
---------7
---------# Consult DODGE For Sizes Not Listed
Part
Name
Weight
Lbs
---------------------------------------------------------------------------------------------------SP4B-E-315R
SP4B-E-400R
SP4B-E-407R
SP4B-E-408R
SP4B-E-415R
SP4B-E-500R
----------------------------------------------------------------
---------------------------------------------------------------------------------------------------65
65
81
81
132
132
----------------------------------------------------------------
F
Bolt
Dia
J1
8.69
1.88
5/8
0.88
1.63
5.50
5.63
4.06
2.75
9.81
2.13
5/8
1.00
1.88
6.25
6.34
4.72
3.13
11.25
2.38
3/4
1.19
2.25
7.50
7.50
5.50
3.75
12.75
2.25
3/4
1.13
2.44
8.50
8.44
6.00
4.25
13.75
2.50
3/4
1.13
2.75
9.38
9.28
6.45
4.75
15.75
2.88
7/8
1.25
3.00
10.88
10.69
7.45
5.50
19.13
3.75
2.00
3.25
13.19
----
9.38
6.69
23.25
4.63
2.00
3.69
14.94
----
11.38
7.50
Max
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-25
ACCESSORIES
PAGE B10-64
E-Family Roller
Bearings
Part
Number
Cast Steel
Weight
Lbs
(Approx)
Specialty Tapered
Products
Gray Iron
S-2000
Shaft
Size
Inches #
UNISPHERE II
4-BOLT BASE
IMPERIAL
UNIFIED SAF
Bearing Reference
Guide
Type E-Xtra Flange Bearing - Inch
4-BOLT BASE
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-26
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
Type E-Xtra Flange Bearing - Inch
Gray Iron
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
F4B-E-103R
F4B-E-104R
F4B-E-106R
F4B-E-107R
F4B-E-108R
F4B-E-110R
F4B-E-111R
F4B-E-112R
F4B-E-114R
F4B-E-115R
F4B-E-200R
F4B-E-203R
F4B-E-204R
F4B-E-207R
F4B-E-208R
F4B-E-211R
F4B-E-212R
F4B-E-215R
F4B-E-300R
F4B-E-303R
F4B-E-304R
F4B-E-307R
F4B-E-308R
F4B-E-315R
F4B-E-400R
F4B-E-407R
F4B-E-408R
Weight
Lbs
(Approx)
4
4
7
7
11
11
11
12
12
12
12
15
21
20
19
28
28
27
26
52
51
50
50
75
75
90
90
F
Bolt
Dia.
2.81
3.75
2.34
2.88
0.06
3/8
1.00
2.94
2.25
3.06
4.63
2.59
3.50
0.06
1/2
1.06
3.50
2.75
3.50
5.38
2.97
4.13
0.13
1/2
1.19
4.19
3.19
3.63
5.63
3.09
4.38
0.13
1/2
1.19
4.44
3.44
3.88
6.25
3.28
4.88
0.13
5/8
1.38
4.88
3.75
4.19
6.88
3.56
5.38
0.19
5/8
1.50
5.31
4.06
4.69
7.75
3.94
6.00
0.19
3/4
1.63
6.00
4.72
5.25
9.25
4.50
7.00
0.25
3/4
1.88
7.25
5.50
6.50
10.25
5.63
7.75
0.25
7/8
2.13
8.25
6.00
7.09
10.88
5.94
8.75
0.34
7/8
2.44
8.75
6.45

FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-27
ACCESSORIES
PAGE B10-64
UNISPHERE II
Shaft
Size
Inches
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
Part
Name
IMPERIAL
Shaft
Part
Size
Number
Inches #
1-3/16
023093
1-1/4
023094
1-3/8
023095
1-7/16
023096
1-1/2
023097
1-5/8
023098
1-11/16
023099
1-3/4
023100
1-7/8
023101
1-15/16
023102
2
023103
2-3/16
023104
2-1/4
023105
2-7/16
023106
2-1/2
023107
2-11/16
023108
2-3/4
023109
2-15/16
023110
3
023111
3-3/16
023112
3-1/4
023113
3-7/16
023114
3-1/2
023115
3-15/16
023116
4
023117
4-7/16
023118
4-1/2
023119
# Consult DODGE For Sizes Not Listed.
UNIFIED SAF
4-BOLT BASE
Bearing Reference
Guide
Type E-Xtra Piloted Flange
F BOLT DIA.
E-Family Roller
Bearings
DD
Specialty Tapered
Products
M
G
M
G
S-2000
UNISPHERE II
M
G
E
H
3-3/16 THRU 3-1/2

CONSTRUCTION
1-3/16 THRU 3
CONSTRUCTION
IMPERIAL
UNIFIED SAF
H
C
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
3-15/16 THRU 5
CONSTRUCTION
EASY SELECTION
PAGE B10-15
B10-28
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
Weight
Lbs (Approx)
5
5
7
6
10
9
9
11
10
10
10
14
18
18
17
27
27
25
25
44
44
43
42
59
58
110
110
130
130
DD
F
Bolt#
K**
5.00
2.22
2.92
4.13
0.75
3/8
1.31
0.44
3.38
2.25
0.84
5.25
2.47
3.09
4.38
0.88
3/8
1.50
0.50
3.63
2.75
1.03
6.13
2.39
3.62
5.13
1.06
7/16
1.56
0.50
4.25
3.19
1.03
6.38
2.91
3.80
5.38
1.19
7/16
1.56
0.56
4.50
3.44
1.03
7.13
3.09
4.24
6.00
1.19
1/2
1.69
0.56
5.00
3.75
1.09
7.63
3.31
4.60
6.50
1.31
1/2
1.81
0.63
5.50
4.06
1.19
8.75
3.69
5.30
7.50
1.50
5/8
2.00
0.75
6.38
4.72
1.25
10.25
4.19
6.10
8.63
1.25
3/4
2.44
0.94
7.38
5.50
1.69
10.88
4.50
6.63
9.38
1.50
3/4
2.69
1.00
8.13
6.00
1.81
13.50
4.63
##
11.75
1.50
3/4##
3.00
1.00
10.25
6.45
1.94
14.75
5.06
##
12.75
1.75
7/8##
2.97
1.25
11.00
7.45
1.88
1-3/16
2.75
1-1/4
1-3/8
3.00
1-7/16
1-1/2
1-5/8
3.38
1-11/16
1-3/4
1-7/8
3.50
1-15/16
2
2-3/16
3.75
2-1/4
2-7/16
4.00
2-1/2
2-11/16
2-3/4
4.50
2-15/16
3
3-3/16
3-1/4
5.00
3-7/16
3-1/2
3-15/16
6.25
4
4-7/16
6.75
4-1/2
4-15/16
7.25
5
* 1-3/16 To 3-1/2 - One Collar
3-15/16 To 5, - Two Collars
Part
Name
FC-E-103R
FC-E-104R
FC-E-106R
FC-E-107R
FC-E-108R
FC-E-110R
FC-E-111R
FC-E-112R
FC-E-114R
FC-E-115R
FC-E-200R
FC-E-203R
FC-E-204R
FC-E-207R
FC-E-208R
FC-E-211R
FC-E-212R
FC-E-215R
FC-E-300R
FC-E-303R
FC-E-304R
FC-E-307R
FC-E-308R
FC-E-315R
FC-E-400R
FC-E-407R
FC-E-408R
FC-E-415R
FC-E-500R
FEATURES/BENEFITS
PAGE B10-2
## (6) BOLTS EQUALLY SPACED

** +.000 -.002
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-29
ACCESSORIES
PAGE B10-64
UNISPHERE II
Shaft
Size
Inches
Gray Iron
IMPERIAL
Shaft Size
Part
Inches #
Number
1-3/16
023120
1-1/4
023121
1-3/8
023122
1-7/16
023123
1-1/2
023124
1-5/8
023125
1-11/16
023126
1-3/4
023127
1-7/8
023128
1-15/16
023129
2
023130
2-3/16
023131
2-1/4
023132
2-7/16
023133
2-1/2
023134
2-11/16
023135
2-3/4
023136
2-15/16
023137
3
023138
3-3/16
023139
3-1/4
023140
3-7/16
023141
3-1/2
023142
3-15/16
023143
4
023144
4-7/16 ##
023145
4-1/2 ##
023146
4-15/16 ##
023147
5 ##
023148
UNIFIED SAF
Type E-Xtra Piloted Flange
Bearing Reference
Guide
Type E-Xtra Wide Slot Take-Up Unit
B
D
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
E
T
C
UNISPHERE II
A
L
IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-30
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
Type E-Xtra Wide Slot Take-Up Unit
Shaft
Size
A
B
C
D
E
Inches
1-3/8
3.00
5.09
0.53
2.75
3.22
1-7/16
1-1/2
1-5/8
3.38
6.00
0.69
3.25
3.81
1-11/16
1-3/4
1-7/8
3.50
6.31
0.69
3.75
3.94
1-15/16
2
2-3/16
3.75
7.13
0.81
3.75
4.63
2-1/4
2-7/16
4.00
7.81
1.06
4.50
5.06
2-1/2
2-11/16
2-3/4
4.50
9.13
1.81
4.75
5.88
2-15/16
3
E-Family Roller
Bearings
CP308
CP400
CP400
Specialty Tapered
Products
8
8
10
10
10
12
12
12
12
16
21
21
21
30
30
30
30
CP408
CP502
CP515
F
Screw
Dia
3/4
0.69
0.63
2.44
1.44
2.75
3.50
4.13
2.06
0.94
0.75
3.31
1.94
3.79
4.00
4.75
2.31
0.94
0.75
3.31
1.94
3.44
4.00
4.75
2.44
1-1/8
1.00
1.25
3.88
2.25
3.75
4.50
5.25
2.56
1-1/4
1.06
1.25
4.25
2.50
4.06
5.13
6.00
2.75
1-1/2
1.13
1.50
4.88
2.75
4.72
5.94
6.75
3.00
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-31
ACCESSORIES
PAGE B10-64
S-2000
WSTU-E-106R
WSTU-E-107R
WSTU-E-108R
WSTU-E-110R
WSTU-E-111R
WSTU-E-112R
WSTU-E-114R
WSTU-E-115R
WSTU-E-200R
WSTU-E-203R
WSTU-E-204R
WSTU-E-207R
WSTU-E-208R
WSTU-E-211R
WSTU-E-212R
WSTU-E-215R
WSTU-E-300R
Frame
UNISPHERE II
Weight
Lbs (Approx)
IMPERIAL
1-3/8
023076
1-7/16
023077
1-1/2
023078
1-5/8
023079
1-11/16
023080
1-3/4
023081
1-7/8
023082
1-15/16
023083
2
023084
2-3/16
023085
2-1/4
023086
2-7/16
023087
2-1/2
023088
2-11/16
023089
2-3/4
023090
2-15/16
023091
3
023092
See page B15-20 for CP Take-Up Frame
FEATURES/BENEFITS
PAGE B10-2
Gray Iron
Part
Name
Part
Number
UNIFIED SAF
Shaft Size #
Inches
Bearing Reference
Guide
Type E-Xtra TP Take-Up Bearing - Inch
Y
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
HOUSING
WIDTH
UNIFIED SAF

FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-32
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
Type E-Xtra TP Take-Up Bearing - Inch
1-3/4
1-7/8
3.50
5.19
1-15/16
2
2 -3/16
3.75
5.81
2 -1/4
2 -7/16
4.00
6.25
2 -1/2
2-11/16
2 -3/4
4.50
7.19
2-15/16
3
3-3/16
3-1/4
5 .00
8.31
3-7/16
3-1/2
3-15/16
6.25
9.06
4
FEATURES/BENEFITS
PAGE B10-2
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
Frame Size
Ref.
TP10
TP10
TP10
TP10
TP20
TP30
TP30
TP30
TP40
TP40
TP40
TP40
TP50
TP50
TP50
TP50
TP60
TP60
Housing
Width
6.38
3.44
1.75
2.56
6.50
6.00
6.88
3.75
1.88
2.56
6.75
7.00
7.44
4.06
2.00
3.00
7.50
7.00
8.31
4.72
2.25
3.00
850
8.00
9.63
5.50
2.50
3.75
9.50
9.00
11.00
6.00
3.13
4.75
11.00
10.50
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-33
ACCESSORIES
PAGE B10-64
UNISPHERE II
Weight Lbs
(Approx)
14
14
14
14
16
21
21
21
29
29
29
29
43
43
42
42
62
62
IMPERIAL
Shaft
Size
Gray Iron
Part
Name
TP-E-112R
TP-E-114R
TP-E-115R
TP-E-200R
TP-E-203R
TP-E-204R
TP-E-207R
TP-E-208R
TP-E-211R
TP-E-212R
TP-E-215R
TP-E-300R
TP-E-303R
TP-E-304R
TP-E-307R
TP-E-308R
TP-E-315R
TP-E-400R
UNIFIED SAF
Shaft Size
Part
Inches #
Number
1-3/4
023149
1-7/8
023150
1-15/16
023151
2
023152
2-3/16
023153
2-1/4
023154
2-7/16
023155
2-1/2
023156
2-11/16
023157
2-3/4
023158
2-15/16
023159
3
023160
3-3/16
023161
3-1/4
023162
3-7/16
023163
3-1/2
023164
3-15/16
023165
4
023166
Bearing Reference
Guide
Type EXL Pillow Block
2-Bolt Base
G
E-Family Roller
Bearings
P
65
Specialty Tapered
Products
M
H
D MIN
D MAX
B
F
C
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
Shaft
Size
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
Non-Expansion
Part No.
077221
077222
077223
077224
077225
077226
077227
077228
077229
077230
077231
077232
077233
077234
077235
077236
077237
077238
077239
077240
077241
Part
Name
P2B-EXL-103R
P2B-EXL-104R
P2B-EXL-106R
P2B-EXL-107R
P2B-EXL-108R
P2B-EXL-110R
P2B-EXL-111R
P2B-EXL-112R
P2B-EXL-114R
P2B-EXL-115R
P2B-EXL-200R
P2B-EXL-203R
P2B-EXL-204R
P2B-EXL-207R
P2B-EXL-208R
P2B-EXL-211R
P2B-EXL-212R
P2B-EXL-215R
P2B-EXL-300R
P2B-EXL-303R
P2B-EXL-304R
3-7/16
077242
P2B-EXL-307R
077265
P2B-EXL-307RE
3-1/2
077243
P2B-EXL-308R
077266
P2B-EXL-308RE
PAGE B10-9
Expansion
Part No.
077244
077245
077246
077247
077248
077249
077250
077251
077252
077253
077254
077255
077256
077257
077258
077259
077260
077261
077262
077263
077264
EASY SELECTION
PAGE B10-15
B10-34
Part
Name
P2B-EXL-103RE
P2B-EXL-104RE
P2B-EXL-106RE
P2B-EXL-107RE
P2B-EXL-108RE
P2B-EXL-110RE
P2B-EXL-111RE
P2B-EXL-112RE
P2B-EXL-114RE
P2B-EXL-115RE
P2B-EXL-200RE
P2B-EXL-203RE
P2B-EXL-204RE
P2B-EXL-207RE
P2B-EXL-208RE
P2B-EXL-211RE
P2B-EXL-212RE
P2B-EXL-215RE
P2B-EXL-300RE
P2B-EXL-303RE
P2B-EXL-304RE
ACCESSORIES
PAGE B10-64
F
Bolt Dia.
1.88
4.56
4.94
1/2
7.25
2.19
5.31
5.94
1/2
3.38
7.75
2.37
5.56
6.44
1/2
3.50
8.88
2.54
6.31
7.19
5/8
3.75
9.62
2.65
6.69
7.94
5/8
4.00
10.38
2.88
6.94
8.69
5/8
4.50
11.75
3.32
8.06
10.00
5.00
13.75
4.00
10.12
11.75
6.25
3.00
Weight
lbs
G
H
J
(Approx)
1-3/16
10
0.75
0.88
3.51
1-1/4
10
1-3/8
12
0.94
1.13
4.17
1-7/16
12
1-1/2
12
1-5/8
15
1.07
1.25
4.69
1-11/16
15
1-3/4
15
1-7/8
19
1.19
1.31
4.99
1-15/16
19
2
19
2-3/16
24
1.38
1.50
5.42
2-1/4
24
2-7/16
29
1.63
1.63
6.08
2-1/2
29
2-11/16
42
2-3/4
42
1.85
1.88
6.77
2-15/16
43
3
43
3-3/16
73
3-1/4
73
1.82
2.25
7.97
3-7/16
73
3-1/2
73
EXP. Total Expansion Divided Equally On Both Sides Of Bearing (Expansion Bearing Only)
PAGE B10-9
7/8
EXP
2.25
1.50
4.06
0.56
2.75
1.88
4.63
0.56
3.19
2.13
5.13
0.56
3.44
2.25
5.56
0.56
3.75
2.50
6.00
0.56
4.06
2.75
6.41
0.56
4.72
3.13
7.50
0.56
5.50
3.75
9.31
0.56
EASY SELECTION
PAGE B10-15
B10-35
3/4
S-2000
2.75
ACCESSORIES
PAGE B10-64
UNISPHERE II
Bearing Reference
Guide
Max
Shaft
Size
FEATURES/BENEFITS
PAGE B10-2
D
Min
IMPERIAL
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
Weight
lbs
(Approx)
10
10
12
12
12
15
15
15
19
19
19
24
24
29
29
42
42
43
43
73
73
73
73
UNIFIED SAF
Shaft
Size
E-Family Roller
Bearings

2-Bolt Base
Specialty Tapered
Products
Bearing Reference
Guide
4-Bolt Base
G
E-Family Roller
Bearings
A
P
65
Specialty Tapered
Products
M
H
S-2000
D MIN
D MAX
B
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
E
C
Shaft
Size
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
Non-Expansion
Part No.
077267
077268
077269
077270
077271
077272
077273
077274
077275
Part
Name
P4B-EXL-204R
P4B-EXL207R
P4B-EXL-208R
P4B-EXL-211R
P4B-EXL-212R
P4B-EXL-215R
P4B-EXL-300R
P4B-EXL-303R
P4B-EXL-304R
Expansion
Part No.
077284
077285
077286
077287
077288
077289
077290
077291
077292
Part
Name
P4B-EXL-204RE
P4B-EXL-207RE
P4B-EXL-208RE
P4B-EXL-211RE
P4B-EXL-212RE
P4B-EXL-215RE
P4B-EXL-300RE
P4B-EXL-303RE
P4B-EXL-304RE
3-7/16
077276
P4B-EXL-307R
077293
P4B-EXL-307RE
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
077277
077278
077279
077280
077281
077282
077283
P4B-EXL-308R
P4B-EXL-315R
P4B-EXL-400R
P4B-EXL-407R
P4B-EXL-408R
P4B-EXL-415R
P4B-EXL-500R
077294
077295
077296
077297
077298
077299
077300
P4B-EXL-308RE
P4B-EXL-315RE
P4B-EXL-400RE
P4B-EXL-407RE
P4B-EXL-408RE
P4B-EXL-415RE
P4B-EXL-500RE
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-36
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
F
Bolts Dia.
8.25
1.88
5/8
8.75
10.00
2.12
5/8
4.50
10.56
11.75
2.38
3/4
15.25
4.74
11.00
13.00
2.25
3/4
6.75
16.50
5.08
12.00
13.88
2.50
3/4
7.25
18.50
5.66
13.50
15.88
2.88
3/4
EXP
4.06
2.75
6.41
0.56
4.72
3.13
7.50
0.56
5.50
3.75
9.31
0.56
6.00
4.25
10.08
0.56
6.45
4.75
11.08
0.56
7.25
5.50
12.71
0.56
4.00
10.38
4.50
Max
3.50
7.75
11.75
3.75
5.00
13.75
6.25
Weight
lbs
G
H
J
(Approx.)
2-1/4
29
2-7/16
29
1.25
1.63
6.08
2-1/2
29
2-11/16
42
2-3/4
42
1.38
1.88
6.77
2-15/16
42
3
42
3-3/16
73
3-1/4
73
1.48
2.25
7.97
3-7/16
73
3-1/2
73
3-15/16
109
1.88
2.44
8.81
4
109
4-7/16
154
1.82
2.75
9.79
4-1/2
154
4-15/16
192
2.23
3.00
11.36
5
192
EXP - Total Expansion Divided Equally On Both Sides Of Bearing (Expansion Bearings Only)
PAGE B10-9
S-2000
Min
EASY SELECTION
PAGE B10-15
B10-37
ACCESSORIES
PAGE B10-64
UNISPHERE II
Shaft
Size
FEATURES/BENEFITS
PAGE B10-2
IMPERIAL
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
Weight
lbs
(Approx.)
29
29
29
42
42
42
42
73
73
73
73
109
109
154
154
192
192
UNIFIED SAF
Shaft
Size
E-Family Roller
Bearings

4-Bolt Base
Specialty Tapered
Products
Bearing Reference
Guide
Type EXL S-1 UNIT
H
DIA
E-Family Roller
Bearings
K
(SEE NOTE)
M
Specialty Tapered
Products
E
MACHINED
E
CAST
L
S-2000
C
UNISPHERE II
B
A
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-38
ACCESSORIES
PAGE B10-64
K*
2.75
1.88
0.56
2.51
2.6370
2.25
1.66
3.00
2.06
0.62
3.03
3.2000
2.75
1.94
3.38
2.31
0.75
3.49
3.6920
3.19
2.19
3.50
2.44
0.82
3.75
3.9650
3.44
2.38
3.75
2.56
0.84
4.22
4.4380
3.75
2.61
4.00
2.75
0.85
4.56
4.7810
4.06
3.04
4.50
3.00
0.98
5.17
5.4325
4.72
3.37
5.00
3.50
1.12
6.30
6.5940
5.50
3.95
6.25
4.50
1.56
6.84
7.2640
6.00
4.28
6.75
4.63
1.63
7.56
8.0000
6.45
4.65
7.25
5.13
1.87
8.79
9.2900
7.25
5.30
Bearing Reference
Guide
S1U-EXL-103R
S1U-EXL-104R
S1U-EXL-106R
S1U-EXL-107R
S1U-EXL-108R
S1U-EXL-110R
S1U-EXL-111R
S1U-EXL-112R
S1U-EXL-114R
S1U-EXL-115R
S1U-EXL-200R
S1U-EXL-203R
S1U-EXL-204R
S1U-EXL-207R
S1U-EXL-208R
S1U-EXL-211R
S1U-EXL-212R
S1U-EXL-215R
S1U-EXL-300R
S1U-EXL-303R
S1U-EXL-304R
S1U-EXL-307R
S1U-EXL-308R
S1U-EXL-315R
S1U-EXL-400R
S1U-EXL-407R
S1U-EXL-408R
S1U-EXL-415R
S1U-EXL-500R
E-Family Roller
Bearings
077192
077193
077194
077195
077196
077197
077198
077199
077200
077201
077202
077203
077204
077205
077206
077207
077208
077209
077210
077211
077212
077213
077214
077215
077216
077217
077218
077219
077220
Weight
lbs
(Approx.)
3
3
4
4
4
6
6
6
6
7
7
9
11
11
11
16
16
16
16
30
30
30
30
42
42
56
56
81
81
UNISPHERE II
Part
Name
IMPERIAL
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
* .0005
Part
Number
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-39
ACCESSORIES
PAGE B10-64
UNIFIED SAF
Shaft
Size
Specialty Tapered
Products
Type EXL S-1 UNIT
S-2000
Bearing Reference
Guide
Type K Pillow Block
2 & 4 BOLT BASE - INCH*

P
E-Family Roller
Bearings
65
2"
Specialty Tapered
Products
G
M
H
D MIN.
F BOLT DIA
D MAX.
B
S-2000
A
NON-EXP
NON-EXP
UNISPHERE II
IMPERIAL
EXP
EXP
3-3/16 THRU 3-15/16 CONSTRUCTION
UNIFIED SAF
1-13/16 THRU 3-1/2 (2 BOLT BASE)

3-15/16 (4 BOLT BASE)
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-40
ACCESSORIES
PAGE B10-64
D
A
Min.
Max.
F
Bolt
Dia
1-3/16
2.28
7.50
1.88
6.00
6.38
3/8
0.69
1-1/4
1-3/8
2.55
8.00
2.19
6.25
6.63
1/2
0.75
1-7/16
1-1/2
1-5/8
2.83
9.00
2.38
6.88
7.63
1/2
1.00
1-11/16
1-3/4
1-15/16
2.95
10.00
2.53
7.38
8.44
5/8
1.30
2
2-3/16
3.16
11.00
2.66
8.06
9.25
5/8
1.33
2-1/4
2-7/16
3.34
12.00
2.81
9.25
10.25
5/8
1.27
2-1/2
2-11/16
2-3/4
3.78
13.44
2.94
9.88
11.50
3/4
1.69
2-15/16
3
3-3/16
3-7/16
4.27
16.00
3.44
12.81
13.81
7/8
1.50
3-1/2
3-15/16 5.41
17.44
4.75
13.13
14.75
3/4
1.70
*Exp-Total Expansion Divided Equally On Both Sides Of Bearing (Expansion Bearings Only)
4-Bolt Base (See Page For Bolts Spacing)
Dowel Hole Locations For Precision Positioning - See Page FEATURES/BENEFITS
PAGE B10-2
Exp*
1.00
4.53
2.25
2.13
5.00
1.00
1.38
3/32
1.25
5.23
2.75
2.38
5.52
1.03
1.50
3/32
1.38
5.75
3.19
2.63
5.81
1.56
1.69
3/32
1.50
6.27
3.44
2.88
6.36
1.20
1.75
9/32
1.50
6.52
3.75
3.00
6.95
1.25
1.88
9/32
1.75
7.03
4.06
3.25
7.38
1.31
2.00
9/32
2.00
7.92
4.72
3.75
8.31
1.44
2.25
9/32
2.25
9.42
5.50
4.50
10.09
1.69
2.50
9/32
2.13
3.13
11/32
2.75
10.42
6.00
5.00
10.70
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-41
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
E-Family Roller
Bearings
Specialty Tapered
Products
Weight
Lbs
(Approx)
9
9
11
15
14
14
20
19
19
24
28
28
28
40
40
39
39
67
66
106
S-2000
Shaft
Size
Inches
Gray Iron Expansion

Shaft
Part
Part
Size
Number
Name
Inches #
1-3/16
023189
P2B-K-103RE
1-1/4
023190
P2B-K-104RE
1-7/16
023192
P2B-K-107RE
1-1/2
023193
P2B-K-108RE
1-5/8
023194
P2B-K-110RE
1-11/16
023195
P2B-K-111RE
1-3/4
023196
P2B-K-112RE
1-15/16
023197
P2B-K-115RE
2
023198
P2B-K-200RE
2-3/16
023199
P2B-K-203RE
2-1/4
023200
P2B-K-204RE
2-7/16
023201
P2B-K-207RE
2-1/2
023200
P2B-K-208RE
2-11/16
023203
P2B-K-211RE
2-3/4
023204
P2B-K-212RE
2-15/16
023205
P2B-K-215RE
3
023206
P2B-K-300RE
3-7/16
023208
P2B-K-307RE
3-1/2
023209
P2B-K-308RE
3-15/16
023210
P4B-K-315RE
Weight
Lbs
(Approx)
9
9
11
15
14
14
20
19
19
24
28
28
28
40
40
39
39
67
66
106
UNISPHERE II
Gray Iron Non-Expansion

Shaft
Part
Part
Size
Number
Name
Inches #
1-3/16
023167
P2B-K-103R
1-1/4
023168
P2B-K-104R
1-7/16
023170
P2B-K-107R
1-1/2
023171
P2B-K-108R
1-5/8
023172
P2B-K-110R
1-11/16
023173
P2B-K-111R
1-3/4
023174
P2B-K-112R
1-15/16
023175
P2B-K-115R
2
023176
P2B-K-200R
2-3/16
023177
P2B-K-203R
2-1/4
023178
P2B-K-204R
2-7/16
023179
P2B-K-207R
2-1/2
023180
P2B-K-208R
2-11/16
023181
P2B-K-211R
2-3/4
023182
P2B-K-212R
2-15/16
023183
P2B-K-215R
3
023184
P2B-K-300R
3-7/16
023186
P2B-K-307R
3-1/2
023187
P2B-K-308R
3-15/16
023188
P4B-K-315R
Non-Expansion Furnished Unless Otherwise Specified
IMPERIAL
Type K Pillow Block

2 & 4 BOLT BASE - INCH*
UNIFIED SAF
Bearing Reference
Guide
Type K Flange Bearing - Inch
B
J
E-Family Roller
Bearings
65
B
Specialty Tapered
Products
F BOLT
G
S-2000
C
H
E
NON-EXP
NON-EXP
UNISPHERE II
IMPERIAL
EXP
EXP
UNIFIED SAF
1-3/16 THRU 3 INTERNAL

CONSTRUCTION
FEATURES/BENEFITS
PAGE B10-2
3-3/16 THRU 3-15/16 INTERNAL

CONSTRUCTION
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-42
ACCESSORIES
PAGE B10-64
023234
023236
023237
023241
023242
023243
023245
023246
023249
023250
023252
023254
F4B-K-104RE
F4B-K-107RE
F4B-K-108RE
F4B-K-115RE
F4B-K-200RE
F4B-K-203RE
F4B-K-207RE
F4B-K-208RE
F4B-K-215RE
F4B-K-300RE
F4B-K-307RE
F4B-K-315RE
Weight
Lbs
(Approx)
6
7
12
14
14
17
20
20
24
24
45
72

Shaft
Size
Inches
1-3/16
2.56
5.19
2.13
5.66
0.19
1-1/4
1-3/8
2.69
5.75
2.13
6.25
0.16
1-7/16
1-1/2
1-5/8
3.00
6.13
2.44
6.75
0.16
1-11/16
1-3/4
1-15/16
3.13
6.88
2.56
7.50
0.16
2
2-3/16
3.31
7.19
2.72
8.00
0.16
2-1/4
2-7/16
3.56
7.63
2.92
8.50
0.25
2-1/2
2-11/16
2-3/4
4.00
8.88
3.34
9.75
0.25
2-15/16
3
3-3/16
3-7/16
4.50
10.25
3.72
11.50
0.25
3-1/2
3-15/16
5.50
11.44
4.63
13.00
0.13
* ExpTotal Expansion Divided Equally On Both Sides Of Bearing (Expansion Bearings Only)
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
F
Bolt
Dia.
Exp*
3/8
5.25
0.44
4.00
2.25
9/32
1/2
5.75
0.50
4.42
2.75
3/16
1/2
6.75
0.50
4.78
3.19
3/16
5/8
7.25
0.56
5.31
3.44
3/16
5/8
7.81
0.56
5.66
3.75
3/16
5/8
8.56
.063
6.00
4.06
5/16
3/4
9.50
0.69
6.89
4.72
5/16
7/8
11.38
0.75
8.13
5.50
5/16
12.88
0.81
9.19
6.00
5/16
EASY SELECTION
PAGE B10-15
B10-43
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
F4B-K-104R
F4B-K-107R
F4B-K-108R
F4B-K-115R
F4B-K-200R
F4B-K-203R
F4B-K-207R
F4B-K-208R
F4B-K-215R
F4B-K-300R
F4B-K-307R
F4B-K-315R
Part
Name
E-Family Roller
Bearings
023212
023214
023215
023219
023220
023221
023223
023224
023227
023228
023230
023232
Part
Number
Specialty Tapered
Products
Part
Name
Shaft
Size
Inches #
1-1/4
1-7/16
1-1/2
1-15/16
2
2-3/16
2-7/16
2-1/2
2-15/16
3
3-7/16
3-15/16
S-2000
Part
Number
DUCTILE Iron - Expansion

Weight
Lbs
(Approx)
6
7
12
14
14
17
20
20
24
24
45
72
UNISPHERE II
DUCTILE Iron - Non-Expansion

Shaft
Size
Inches #
1-1/4
1-7/16
1-1/2
1-15/16
2
2-3/16
2-7/16
2-1/2
2-15/16
3
3-7/16
3-15/16
IMPERIAL
Type K Flange Bearing - Inch
UNIFIED SAF
Bearing Reference
Guide
Type K Units - Inch
A
H
DIA
E-Family Roller
Bearings
M
S
E
Specialty Tapered
Products
C
B
S-2000
S-1 UNIT
A
H
DIA
UNISPHERE II
S
D
IMPERIAL
B
UNIFIED SAF
B-1 UNIT
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-44
ACCESSORIES
PAGE B10-64
FEATURES/BENEFITS
PAGE B10-2
E%
Machine
Cast
Side
Side
D*
1.03
----
2.81
1.16
3.438
1.19
K **
3.13
0.44
----
3.125
2.25
2.03
1.00
1.38
3.25
3.31
0.69
2.63
3.625
2.75
2.63
1.03
1.50
3.948
3.75
3.81
0.69
2.88
4.125
3.19
2.81
1.16
1.69
1.50
4.250
4.13
4.19
0.69
3.00
4.562
3.44
3.06
1.20
1.75
1.56
4.625
4.50
4.56
0.69
3.25
5.000
3.75
3.25
1.25
1.88
1.44
5.000
4.81
4.88
0.69
3.44
5.186
4.06
3.38
1.31
2.00
1.88
5.875
5.56
5.63
0.69
3.88
6.061
4.72
3.81
1.44
2.25
2.00
7.125
6.81
6.88
0.69
4.50
7.373
5.50
4.50
1.69
2.50
2.38
7.875
7.44
7.50
0.94
5.50
7.997
6.00
5.16
2.13
% Machined side of unit is on collar side only.
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-45
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
E-Family Roller
Bearings
Specialty Tapered
Products
Weight
Lbs
(Approx)
3
3
4
4
5
5
5
7
7
7
9
11
11
11
15
15
15
15
28
28
28
40
S-2000
Shaft
Size
A
B
Inches
1-3/16
2.31
1.88
1-1/4
1-3/8
2.53
2.06
1-7/16
1-1/2
1-5/8
2.84
2.31
1-11/16
1-3/4
1-15/16
2.97
2.44
2
2-3/16
3.16
2.56
2-1/4
2-7/16
3.38
2.75
2-1/2
2-11/16
2-3/4
3.75
3.00
2-15/16
3
3-3/16
3-7/16
4.25
3.50
3-1/2
3-15/16
5.38
4.50
* +.000 -.002,
** +.000 -.001 Sizes 1-3/16 THRU 3,
.0005, Sizes 3-3/16 THRU 3-15/16,
ALL DIMENSIONS SHOWN IN Inches
Type B-1 Units -- Gray Iron

Shaft
Part
Part
Size
Number
Name
Inches #
1-3/16
-----B1U-K-103R
1-1/4
-----B1U-K-104R
1-3/8
023293
B1U-K-106R
1-7/16
023294
B1U-K-107R
1-1/2
023295
B1U-K-108R
1-5/8
023296
B1U-K-110R
1-11/16
023297
B1U-K-111R
1-3/4
023298
B1U-K-112R
1-15/16
023299
B1U-K-115R
2
023300
B1U-K-200R
2-3/16
023301
B1U-K-203R
2-1/4
023302
B1U-K-204R
2-7/16
023303
B1U-K-207R
2-1/2
023304
B1U-K-208R
2-11/16
023305
B1U-K-211R
2-3/4
023306
B1U-K-212R
2-15/16
023307
B1U-K-215R
3
023308
B1U-K-300R
3-3/16
023309
B1U-K-303R
3-7/16
023310
B1U-K-307R
3-1/2
023311
B1U-K-308R
3-15/16
023312
B1U-K-315R
Weight
Lbs
(Approx)
3
3
4
4
5
5
5
7
7
7
9
11
11
11
15
15
15
15
28
28
28
40
3.13
UNIFIED SAF
Type S-1 Units -- Gray Iron

Shaft
Part
Part
Size
Number
Name
Inches #
1-3/16
023271
S1U-K-103R
1-1/4
023272
S1U-K-104R
1-3/8
023273
S1U-K-106R
1-7/16
023274
S1U-K-107R
1-1/2
023275
S1U-K-108R
1-5/8
023276
S1U-K-110R
1-11/16
023277
S1U-K-111R
1-3/4
023278
S1U-K-112R
1-15/16
023279
S1U-K-115R
2
023280
S1U-K-200R
2-3/16
023281
S1U-K-203R
2-1/4
023282
S1U-K-204R
2-7/16
023283
S1U-K-207R
2-1/2
023284
S1U-K-208R
2-11/16
023285
S1U-K-211R
2-3/4
023286
S1U-K-212R
2-15/16
023287
S1U-K-215R
3
023288
S1U-K-300R
3-3/16
023289
S1U-K-303R
3-7/16
023290
S1U-K-307R
3-1/2
023291
S1U-K-308R
3-15/16
023292
S1U-K-315R
UNISPHERE II
Type K Units - Inch
IMPERIAL
Bearing Reference
Guide
Type K Wide Slot Take-Up Unit - Inch
D
H
E-Family Roller
Bearings
Specialty Tapered
Products
E
B
S-2000
UNISPHERE II
R
N
IMPERIAL
C
T
UNIFIED SAF

FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-46
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
Type K Wide Slot Take-Up Unit - Inch
Gray Iron
E-Family Roller
Bearings
CP515
F
Screw
Dia
3.22
3.94
4.63
3/4
1
1-1/8
0.69
0.94
1.00
0.63
0.75
1.25
2.44
3.31
3.88
1.44
1.94
2.25
2.75
3.44
3.75
3.50
4.00
4.50
4.13
4.75
5.25
1.03
1.20
1.25
1.50
1.75
1.88
2.06
2.44
2.56
5.06
1-1/2
1.06
1.25
4.25
2.50
4.06
5.13
6.00
1.31
2.00
2.75
5.88
1-1/2
1.38
1.50
4.88
2.75
4.72
5.94
6.75
1.44
2.25
3.00
IMPERIAL
UNISPHERE II
1-7/16
2.53
5.09
0.53
2.75
1-15/16
2.97
6.31
0.69
3.75
2-3/16
3.16
7.13
0.81
3.75
2-7/16
3.38
7.891
1.06
4.50
2-1/2
2-15/16
3.75
9.13
1.81
4.75
3
CP502
Specialty Tapered
Products
WSTU-K-107R
WSTU-K-115R
WSTU-K-203R
WSTU-K-207R
WSTU-K-208R
WSTU-K-215R
WSTU-K-300R
CP
FRAME
Size
CP308
CP400
CP408
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-47
ACCESSORIES
PAGE B10-64
UNIFIED SAF
Shaft
Size
Inches
Weight
Lbs
(Approx)
8
11
15
20
20
28
28
Part
Name
S-2000
Shaft
Part
Size
Number
Inches #
1-7/16
023256
1-15/16
023261
2-3/16
023263
2-7/16
023265
2-1/2
023266
2-15/16
023269
3
023270
Bearing Reference
Guide
Type K TP Take-Up Bearing - Inch
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL

CONSTRUCTION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
3-3/16 THRU 3-15/16 INTERNAL

CONSTRUCTION
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-48
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
Type K TP Take-Up Bearing - Inch
Gray Iron
Frame
Size
Ref.
3.44
3.75
4.06
4.72
5.50
6.00
1.75
1.88
2.00
2.25
2.41
3.13
1.22
1.25
1.31
1.44
1.78
2.13
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-49
ACCESSORIES
PAGE B10-64
UNIFIED SAF
IMPERIAL
UNISPHERE II
1-15/16
TP10
3.03
2-3/16
TP20
3.19
2-7/16
TP30
3.50
2-15/16
TP40
3.75
3-7/16
TP50
4.28
3-15/16
TP60
5.50
E-Family Roller
Bearings
TP-K-115R
TP-K-203R
TP-K-207R
TP-K-215R
TP-K-307R
TP-K-315R
Specialty Tapered
Products
Shaft
Size
Inches
Weight
Lbs
(Approx)
13
16
20
27
40
59
Part
Name
S-2000
Shaft
Part
Size
Number
Inches #
1-15/16
023314
2-3/16
023316
2-7/16
023318
2-15/16
023322
3-7/16
023325
3-15/16
023327
Bearing Reference
Guide
DOUBLE-INTERLOCK Pillow Block - Inch
2-BOLT BASE
P
E-Family Roller
Bearings
65
J
Specialty Tapered
Products
G
M
H
D MIN.
F BOLT DIA
D MAX.
S-2000
NON-EXP
NON-EXP
UNISPHERE II
IMPERIAL
EXP
EXP
UNIFIED SAF

FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-50
ACCESSORIES
PAGE B10-64
D
A
Min.
Max.
F
Bolt
Dia.
1-1/4
2.75
7.50
1.88
6.00
6.38
3/8
1-3/8
3.00
8.00
2.19
6.25
6.63
1/2
1-7/16
1-1/2
1-5/8
3.38
9.00
2.38
6.88
7.63
1/2
1-11/16
1-3/4
1-15/16
3.50
10.00
2.53
7.38
8.44
5/8
2
2-3/16
3.75
11.00
2.66
8.06
9.25
5/8
2-1/4
2-7/16
4.00
12.00
2.81
9.27
10.25
5/8
2-1/2
2-11/16
2-3/4
4.50
13.44
2.94
9.88
11.50
3/4
2-15/16
3
3-3/16
3-7/16
5.00
16.00
3.44
12.81
13.81
7/8
3-1/2
* EXP - Total Expansion Divided Equally On Both Sides Of Bearing (Expansion Bearings Only)
Dowel Hole Locations For Precision Positioning - See Page FEATURES/BENEFITS
PAGE B10-2
Bearing
Inner
Unit
023508
023509
023510
023511
023512
023513
023514
023516
023517
023518
023519
023520
023521
023522
023523
023524
023525
023526
023528
023529
PIL. BLK.
Wt., Aprx
Lbs
9
11
11
15
15
15
18
17
17
22
29
26
26
42
42
41
41
69
68
68
S-2000
Gray Iron Expansion

Shaft
Shaft
Pillow
Housing
Size
Size
Block
Only
Inches#
Symbol
Assy
1-1/4
104
023376
056100
1-3/8
106
023377
056102
1-7/16
107
023378
056102
1-1/2
108
023379
056104
1-5/8
110
023380
056104
1-11/16
111
023381
056104
1-3/4
112
023382
056106
1-15/16
115
023384
056106
2
200
023385
056106
2-3/16
203
023386
056108
2-1/4
204
023387
056110
2-7/16
207
023388
056110
2-1/2
208
023389
056110
2-11/16
211
023390
056112
2-3/4
212
023391
056112
2-15/16
215
023392
056112
3
300
023393
056112
3-3/16
303
023394
056114
3-7/16
307
023396
056114
3-1/2
308
023397
056114
Description = P2B-DI-207RE For 2-7/16 Size
Exp*
0.67
1.00
4.53
2.25
2.13
5.00
3/32
0.75
1.25
5.23
2.75
2.38
5.52
3/32
1.00
1.38
5.75
3.19
2.63
5.81
3/32
1.30
1.50
6.27
3.44
2.88
6.36
9/32
1.33
1.50
6.52
3.75
3.00
6.97
9/32
1.27
1.75
7.03
4.06
3.25
7.38
9/32
1.69
2.00
7.92
4.72
3.75
8.31
9/32
1.50
2.25
9.42
5.50
4.50
10.09
9/32
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-51
ACCESSORIES
PAGE B10-64
UNISPHERE II
Unit
023508
023509
023510
023511
023512
023513
023514
023516
023517
023518
023519
023520
023521
023522
023523
023524
023525
023526
023528
023529
PIL. BLK.
Wt., Aprx
Lbs
9
11
11
15
15
15
18
17
17
25
29
26
26
41
41
40
40
67
66
66
IMPERIAL
Shaft
Size
Inches
Bearing
Inner
UNIFIED SAF

Shaft
Shaft
Pillow
Housing
Size
Size
Block
Only
Inches#
Symbol
Assy
1-1/4
104
023329
056130
1-3/8
106
023330
056132
1-7/16
107
023331
056132
1-1/2
108
023332
056134
1-5/8
110
023333
056134
1-11/16
111
023334
056134
1-3/4
112
023335
056136
1-15/16
115
023337
056136
2
200
023338
056136
2-3/16
203
023339
056138
2-1/4
204
023340
056140
2-7/16
207
023341
056140
2-1/2
208
023342
056140
2-11/16
211
023343
056142
2-3/4
212
023344
056142
2-15/16
215
023345
056142
3
300
023346
056142
3-3/16
303
023347
056144
3-7/16
307
023349
056144
3-1/2
308
023350
056144
Description = P2B-DI-207R For 2-7/16 Size
Bearing Reference
Guide
2-BOLT BASE
E-Family Roller
Bearings
Specialty Tapered
Products
Bearing Reference
Guide
4-BOLT BASE
E-Family Roller
Bearings
65
E
Specialty Tapered
Products
G
M
H
D MIN.
D MAX.
F BOLT DIA
S-2000
NON-EXP
NON-EXP
NON-EXP
UNISPHERE II
EXP
EXP
EXP
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-52
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
4-BOLT BASE
Shaft
Size
Inches#
2-7/16
2-1/2
2-11/16
2-15/16
3
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
5-7/16
Shaft
Size
Symbol
207
208
211
215
300
307
308
315
400
407
408
415
500
507
5-15/16
515
Gray Iron NON EXPANSION

Pillow
Housing
Block
Only
ASSY
023352
060745
023353
060745
023354
060747
023356
060747
023357
060747
023360
060749
023361
060749
023362
060751
023363
060751
023364
060753
023365
060753
023366
060755
023367
060755
023368
060579
023369
060579
Bearing
Inner
Unit
023520
023521
023522
023524
023525
023528
023529
023530
023531
023532
023533
023534
023535
023536
PIL. BLK.
WT., Aprx
Lbs
28
28
38
38
38
69
69
109
109
139
135
183
181
310
Shaft
Size
Inches#
2-7/16
2-1/2
2-11/16
2-15/16
3
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
5-7/16
Shaft
Size
Symbol
207
208
211
215
300
307
308
315
400
407
408
415
500
507
023537
299
5-15/16
515
Gray Iron EXPANSION

Pillow
Housing
Block
Only
ASSY
023399
060746
023400
060746
023401
060748
023403
060748
023404
060748
023407
060750
023408
060750
023409
060752
023410
060752
023411
060754
023412
060754
023413
060756
023414
060756
023415
060578
Bearing
Inner
Unit
023520
023521
023522
023524
023525
023528
023529
023530
023531
023532
023533
023534
023535
023536
PIL. BLK.
WT., Aprx
Lbs
28
28
38
38
38
69
69
110
110
139
135
181
179
310
023416
023537
299
060578
E-Family Roller
Bearings
Specialty Tapered
Products
Min.
Max
2-7/16
4.00
12.00
3.38
9.27
10.25
1.75
2-1/2
2-11/16
2-15/16
4.50
13.44
3.50
9.88
11.50
1.88
3
3-7/16
5.00
16.00
4.00
12.81
13.81
2.00
3-1/2
3-15/16
6.25
17.44
4.75
13.13
14.75
2.00
4
4-7/16
6.75
19.00
4.63
14.38
16.25
2.25
4-1/2
4-15/16
7.25
20.50
5.13
15.50
18.06
2.50
5
5-7/16
9.00
23.69
6.25
19.00
20.63
3.00
5-15/16
*EXP - Total Expansion Divided Equally On Both Sides Of Bearing (Expansion Bearings Only)
Dowel Hole Locations For Precision Positioning - See Page -
FEATURES/BENEFITS
PAGE B10-2
F
Bolt
Dia
Exp*
1/2
1.06
1.75
7.03
4.06
3.25
7.38
9/32
5/8
1.56
2.00
7.92
4.72
3.75
8.31
9/32
3/4
1.45
2.25
9.42
5.50
4.50
10.09
9/32
3/4
1.70
2.75
10.42
6.00
5.00
10.70
11/32
3/4
1.81
3.00
11.59
6.45
5.75
12.45
11/32
7/8
2.28
3.25
12.83
7.45
6.25
13.36
11/32
1.94
3.50
14.59
9.38
7.13
15.13
1/2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-53
ACCESSORIES
PAGE B10-64
UNISPHERE II
IMPERIAL
D
A
UNIFIED SAF
Shaft
Size
Inches
S-2000

Bearing Reference
Guide
DOUBLE-INTERLOCK Flange Bearing - Inch
B
J
E-Family Roller
Bearings
65
D
65
B
Specialty Tapered
Products
D
F BOLT
F BOLT
G
4-7/16 THRU 5 EXTERNAL CONSTRUCTION
1-3/16 THRU 4 EXTERNAL CONSTRUCTION
C
S-2000
C
H
E
NON-EXP
(D UNITS SHOWN)
NON-EXP
UNISPHERE II
IMPERIAL
EXP
EXP

CONSTRUCTION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2

CONSTRUCTION
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-54
ACCESSORIES
PAGE B10-64
Shaft
Size
Inches
1-7/16
1-15/16
2
2-3/16
2-7/16
2-1/2
2-15/16
3
3-7/16
3-15/16
4-7/16
4-1/2
4-15/16
Part
Number
Part
Name
023454
023460
023461
023462
023464
023465
023468
023469
023472
023474
023476
023477
023478
F4B-DI-107RE
F4B-DI-115RE
F4B-DI-200RE
F4B-DI-203RE
F4B-DI-207RE
F4B-DI-208RE
F4B-DI-215RE
F4B-DI-300RE
F4B-DI-307RE
F4B-DI-315RE
F4B-DI-407RE
F4B-DI-408RE
F4B-DI-415RE
Weight
Lbs
(Approx)
9
15
15
19
22
22
32
31
53
82
158
158
220
F
Bolt
Dia.
3.00
5.75
2.13
6.25
0.31
1/2
5.75
0.50
4.42
2.75
3.50
6.88
2.56
7.50
0.38
5/8
7.25
0.56
5.31
3.44
3.75
7.19
2.72
8.00
0.44
5/8
7.81
0.56
5.66
3.75
4.00
7.63
2.94
8.50
0.44
5/8
8.56
0.63
6.00
4.06
4.50
8.88
3.34
9.75
0.50
3/4
9.50
0.69
6.89
4.72
5.00
6.25
10.25
11.44
3.72
4.63
11.50
13.00
0.50
0.75
7/8
1
11.38
12.88
0.75
0.81
8.13
9.19
5.50
6.00
6.75
17.75
4.63
15.00
1.06
---
1.00
10.61
6.45
7.25
19.00
5.00
16.00
1.13
1-1/8
---
1.13
11.31
7.45
Bearing Reference
Guide
Shaft
Size
Inches #
1-7/16
1-15/16
2
2-3/16
2-7/16
2-1/2
2-15/16
3
3-7/16
3-15/16
4-7/16
4-1/2
4-15/16
E-Family Roller
Bearings
DUCTILE Iron Expansion

Weight
Lbs
(Approx)
9
15
15
19
22
22
32
31
53
82
158
158
220
Specialty Tapered
Products
DUCTILE Iron Non-Expansion

Shaft
Part
Part
Size
Number
Name
Inches #
1-7/16
023425
F4B-DI-107R
1-15/16
023431
F4B-DI-115R
2
023432
F4B-DI-200R
2-3/16
023433
F4B-DI-203R
2-7/16
023435
F4B-DI-207R
2-1/2
023436
F4B-DI-208R
2-15/16
023439
F4B-DI-215R
3
023440
F4B-DI-300R
3-7/16
023443
F4B-DI-307R
3-15/16
023445
F4B-DI-315R
4-7/16
023447
F4B-DI-407R
4-1/2
023448
F4B-DI-408R
4-15/16
023449
F4B-DI-415R
4-7/16 - 5 Housings Are Made Of Cast Iron
S-2000
DOUBLE-INTERLOCK Flange Bearing - Inch
UNISPHERE II
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-55
ACCESSORIES
PAGE B10-64
UNIFIED SAF
IMPERIAL
Bearing Reference
Guide
DOUBLE-INTERLOCK Units - Inch
E-Family Roller
Bearings
S-1 UNIT
D UNIT
Specialty Tapered
Products
Pillow Block
S-1 units are used in expansion and non-expansion pillow
block housings
Flange
S-1 unit is used in expansion flange housings and nonexpansion flange housings for 1-3/16 - 4
4-7/16 - 5 bore size

Formerly used in DOUBLE-INTERLOCK non-expansion
flange bearing and pillow blocks thru 5 bore size prior
to 78
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
E
Shaft
Size
A
B
C
Mach
Cast
sD
Inches
Side
Side
1-3/16
2.75
1.88
1.03
3.000
2.81
2.28
1-1/4
1-3/8
3.00
2.06
1.16
3.438
3.25
3.31
1-7/16
1-1/2
1-5/8
3.38
2.31
1.19
3.938
3.75
3.81
1-11/16
1-3/4
1-7/8
3.50
2.44
1.50
4.250
4.13
4.19
1-15/16
2
2-3/16
3.75
2.56
1.56
4.625
4.50
4.63
2-1/4
2-7/16
4.00
2.75
1.44
5.000
4.81
4.88
2-1/2
2-11/16
2-3/4
4.50
3.00
1.88
5.875
5.56
5.63
2-15/16
3
3-3/16
3-1/4
5.00
3.50
2.00
7.125
6.81
6.88
3-7/16
3-1/2
3-15/16
6.25
4.50
2.38
7.875
7.44
7.50
4
4-7/16
6.75
4.63
2.38
8.750
8.31
8.38
4-1/2
4-15/16
7.25
5.13
2.88
10.125
9.56
9.63
5
5-7/16
5-15/16
9.00
6.06
2.88
--11.19
11.19
6
6-7/16
6-1/2
10.50
7.13
3.00
--13.25
13.25
6-15/16
7
* 11/16 DIA ON D Units; 15/16 ON S-1 Units AND 3/4 HEX ON B-1 Units
** 11/16 DIA ON B-1 Units; 7/16 DIA ON S-1 Units
FEATURES/BENEFITS
PAGE B10-2
B-1 UNIT
Flange
D units are used in non-expansion flange housings
B-1 units can only be used in a customer manufactured

housing and are often mounted in machines where bored
holes can be provided. B-1 units can be used either as
non-expansion or expansion bearings by providing a
suitable means of locating the unit axially. B-1 units will
handle slight misalignment requirements. Shaft must
be supported by another unit or bearing. For mounting
in rotating wheels the Type C B-1 units is preferred or
consult the factory.
**
2.42
3.125
2.25
2.03
---
---
---
11/16
2.54
3.625
2.75
2.64
2.88
3.63
3.844
11/16
2.79
4.125
3.19
2.89
3.13
4.09
4.344
11/16
2.95
4.562
3.44
3.10
3.25
4.44
4.656
11/16
3.13
5.000
3.75
3.32
3.44
4.72
5.000
11/16
3.32
5.186
4.06
3.41
3.58
5.16
5.437
11/16
3.76
6.061
4.72
3.85
4.00
5.81
6.094
11/16
4.38
7.373#
5.50
4.51
4.69
7.22
7.500 ^
5.48
7.997#
6.00
5.16
5.13
8.13
8.375 ^
5.91
8.872#
6.45
5.60
5.50
8.88
9.125 ^
6.6
10.184#
7.45
6.26
6.19
10.25
10.500 ^
15/16
---
11.874
9.38
7.10
---
---
---
15/16
---
14.248
11.38
8.29
---
---
---
+.000 TO .001
# .0005
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-56
s +.000 TO -.002
+.000 TO -.003
ACCESSORIES
PAGE B10-64
D Units -- Gray Iron

Shaft
Part
Part
Size
Number
Name
Inches #
1-3/16
-------DU-DI-103R
1-1/4
-------DU-DI-104R
1-3/8
023480
DU-DI-106R
1-7/16
023481
DU-DI-107R
1-1/2
023482
DU-DI-108R
1-5/8
023483
DU-DI-110R
1-11/16
023484
DU-DI-111R
1-3/4
023485
DU-DI-112R
1-7/8
023486
DU-DI-114R
1-15/16
023487
DU-DI-115R
2
023488
DU-DI-200R
2-3/16
023489
DU-DI-203R
2-1/4
023490
DU-DI-204R
2-7/16
023491
DU-DI-207R
2-1/2
023492
DU-DI-208R
2-11/16
023493
DU-DI-211R
2-3/4
023494
DU-DI-212R
2-15/16
023495
DU-DI-215R
3
023496
DU-DI-300R
3-3/16
023497
DU-DI-303R
3-1/4
023498
DU-DI-304R
3-7/16
023499
DU-DI-307R
3-1/2
023500
DU-DI-308R
3-15/16
023501
DU-DI-315R
4
023502
DU-DI-400R
4-7/16
023503
DU-DI-407R
4 1/2
023504
DU-DI-408R
4-15/16
023505
DU-DI-415R
023506
DU-DI-500R
5
FEATURES/BENEFITS
PAGE B10-2
Weight
Lbs
(Approx)
--------------5
5
8
7
7
8
8
8
8
9
12
12
12
18
17
16
16
32
31
30
29
46
43
57
64
85
85
Part
Name
S1U-DI-303R
S1U-DI-304R
S1U-DI-307R
S1U-DI-308R
S1U-DI-315R
S1U-DI-400R
S1U-DI-407R
S1U-DI-408R
S1U-DI-415R
S1U-DI-500R
S1U-DI-507R
S1U-DI-515R
S1U-DI-600R
S1U-DI-607R
S1U-DI-608R
S1U-DI-615R
S1U-DI-700R
B-1 Units -- Gray Iron

Shaft
Part
Part
Size
Number
Name
Inches #
1-3/16
023543
BIU-DI-103R
1-3/8
023545
BIU-DI-106R
1-7/16
023546
BIU-DI-107R
1-1/2
023547
BIU-DI-108R
1-5/8
023548
BIU-DI-110R
1-3/4
023550
BIU-DI-112R
1-15/16
023552
BIU-DI-115R
2
023553
BIU-DI-200R
2-3/16
023554
BIU-DI-203R
2-7/16
023556
BIU-DI-207R
2-1/2
023557
BIU-DI-208R
2-11/16
023558
BIU-DI-211R
2-3/4
023559
BIU-DI-212R
2-15/16
023560
BIU-DI-215R
3
023561
BIU-DI-300R
3-7/16
023564
BIU-DI-307R
3-1/2
023565
BIU-DI-308R
3-15/16
023566
BIU-DI-315R
4
023567
BIU-DI-400R
4-7/16
023568
BIU-DI-407R
4 1/2
023569
BIU-DI-408R
4-15/16
023570
BIU-DI-415R
5
023571
BIU-DI-500R
Weight
Lbs
(Approx)
34
31
31
31
43
43
57
64
82
82
159
135
128
187
182
180
178
Weight
Lbs
(Approx)
3
5
5
6
6
8
8
7
9
12
11
17
17
17
17
30
30
45
44
58
64
87
86
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-57
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
Shaft
Part
Size
Number
Inches #
3-3/16
023526
3-1/4
023527
3-7/16
023528
3-1/2
023529
3-15/16
023530
4
023531
4-7/16
023532
4-1/2
023533
4-15/16
023534
5
023535
5-7/16
023536
5-15/16
023537
6
023538
6-7/16
023539
6-1/2
023540
6-15/16
023541
7
023542
E-Family Roller
Bearings
S1U-DI-103R
S1U-DI-104R
S1U-DI-106R
S1U-DI-107R
S1U-DI-108R
S1U-DI-110R
S1U-DI-111R
S1U-DI-112R
S1U-DI-114R
S1U-DI-115R
S1U-DI-200R
S1U-DI-203R
S1U-DI-204R
S1U-DI-207R
S1U-DI-208R
S1U-DI-211R
S1U-DI-212R
S1U-DI-215R
S1U-DI-300R
Weight
Lbs
(Approx)
3
4
5
5
7
7
7
8
8
8
8
10
12
11
11
18
17
17
17
Specialty Tapered
Products
Part
Name
S-2000
Shaft
Part
Size
Number
Inches #
1-3/16
023507
1-1/4
023508
1-3/8
023509
1-7/16
023510
1-1/2
023511
1-5/8
023512
1-11/16
023513
1-3/4
023514
1-7/8
023515
1-15/16
023516
2
023517
2-3/16
023518
2-1/4
023519
2-7/16
023520
2-1/2
023521
2-11/16
023522
2-3/4
023523
2-15/16
023524
3
023525
S-1 Units -- Gray Iron

3-3/16 thru 7
UNISPHERE II
S-1 Units -- Gray Iron

1-3/16 thru 3
IMPERIAL
DOUBLE-INTERLOCK Units - Inch
UNIFIED SAF
Bearing Reference
Guide
TAF Pillow Block - Inch
2-BOLT BASE
P
E-Family Roller
Bearings
65
NOTE: All sizes use a

1/8 - 27 NPT hydraulic
grease fitting
Specialty Tapered
Products
G
M
H
D MIN.
D MAX.
F BOLT DIA
B
S-2000
NON-EXP
NON-EXP
UNISPHERE II
IMPERIAL
EXP
EXP
C
3-7/16" THRU 3-1/2" CONSTRUCTION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-58
ACCESSORIES
PAGE B10-64
Shaft
Size
Inches
Saf
Series
Bearing
Inner
Unit
037632
037633
037634
037635
037636
037637
037638
037639
037640
037641
037642
037643
Bearing Reference
Guide
Pil.
Blk.Wt.
Aprx Lbs
12
15
17
25
30
30
38
38
45
44
71
70
D
A
Min.
Max.
1-7/16
509
3.00
8.25
2.19
6.25
7.00
1-11/16
510
3.38
8.25
2.38
6.50
7.00
1-15/16
511
3.50
9.63
2.75
7.38
8.25
2-3/16
513
3.75
11.00
3.25
8.66
9.50
2-7/16
515
4.00
11.13
3.13
8.63
9.63
2-1/2
2-11/16
516
4.50
12.59
3.50
9.88
11.00
2-3/4
2-15/16
517
4.50
12.59
3.50
9.88
11.00
3
3-7/16
520
5.00
15.38
4.34
11.81
13.13
3-1/2
*EXP Total Expansion Divided Equally On Both Sides Of Bearing (Expansion Bearing Only).
Shaft
Size
Inches #
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-7/16
3-1/2
Shaft
Size
Symbol
107
111
115
203
207
208
211
212
215
300
307
308
Gray Iron Expansion

Saf
Pillow
Housing
Housing
Block
Only
Number
Assy
509
037592
037555
510
037593
037556
511
037594
037557
513
037595
037558
037596
037559
515
037597
037559
037598
037560
516
037599
037560
037600
037561
517
037601
037561
037602
037562
520
037603
037562
Bearing
Inner
Unit
037632
037633
037634
037635
037636
037637
037638
037639
037640
037641
037642
037643
Pil.
Blk.Wt.
Aprx Lbs
12
15
17
25
30
30
38
38
45
44
71
70
F
Bolt
Dia
Exp*
1/2
1/2
5/8
5/8
0.94
0.88
1.20
1.44
0.88
1.03
1.03
1.03
5.11
5.63
6.14
6.52
2.75
3.19
3.44
3.75
2.25
2.50
2.75
3.00
5.52
5.81
6.36
6.95
3/32
3/32
9/32
9/32
5/8
1.27
1.25
7.03
4.06
3.25
7.38
9/32
3/4
1.44
1.00
7.67
4.72
3.50
8.31
9/32
3/4
1.44
1.25
7.92
4.72
3.75
8.31
9/32
7/8
1.66
1.66
9.42
5.50
4.50
10.09
9/32
E-Family Roller
Bearings

Shaft
Shaft
Saf
Pillow
Housing
Size
Size
Housing
Block
Only
Inches # Symbol
Number
Assy
1-7/16
107
509
037580
037540
1-11/16
111
510
037581
037541
1-15/16
115
511
037582
037542
2-3/16
203
513
037583
037543
2-7/16
207
037584
037544
515
2-1/2
208
037585
037544
2-11/16
211
037586
037545
516
2-3/4
212
037587
037545
2-15/16
215
037588
037546
517
3
300
037589
037546
3-7/16
307
037590
037547
520
3-1/2
308
037591
037547
Non-Expansion Furnished Unless Otherwise Specified.
# Consult DODGE For Sizes Not Shown
Specialty Tapered
Products
2-BOLT BASE
S-2000
UNISPHERE II
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-59
ACCESSORIES
PAGE B10-64
UNIFIED SAF
IMPERIAL
Bearing Reference
Guide
4-BOLT BASE
P
E-Family Roller
Bearings
65

grease fitting
Specialty Tapered
Products
G
M
H
D MIN.
D MAX.
B
S-2000
NON-EXP
F BOLT DIA
NON-EXP
NON-EXP
UNISPHERE II
EXP
EXP
EXP
IMPERIAL
2-7/16" THRU 3"

CONSTRUCTION
3-7/16" THRU 5"

CONSTRUCTION
5-7/16" THRU 7"

CONSTRUCTION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-60
ACCESSORIES
PAGE B10-64
Shaft
Size
SAF
Series
D
A
min.
max.
2-7/16
515
4.00
11.13
3.13
8.63
9.63
1.88
2-1/2
2-11/16
516
4.50
12.59
3.50
9.88
11.00
2.13
2-3/4
2-15/16
517
4.50
12.59
3.50
9.88
11.00
2.13
3
3-7/16
520
5.00
15.38
4.34
11.63
13.13
2.38
3-1/2
3-15/16
522
6.25
16.50
4.75
12.59
14.50
2.75
4
4-7/16
526
6.75
18.38
5.13
14.50
16.00
3.25
4-1/2
4-15/16
528
7.25
19.70
5.88
15.63
17.38
3.38
5
5-7/16
532
9.00
21.66
6.25
17.63
19.25
3.75
5-15/16
534
9.00
24.75
6.75
19.00
21.63
4.25
6
6-7/16
536
10.50
26.75
7.13
21.00
23.63
4.63
6-1/2
6-15/16
538
10.50
28.00
7.50
21.63
24.38
4.50
7
*EXP - Total Expansion Divided Equally On Both Sides Of Bearing (Expansion Bearings Only)
Note: All sizes use a 1/8-27 NPT hydraulic grease fitting
FEATURES/BENEFITS
PAGE B10-2
Shaft
Size
Inches #
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
5-7/16
5-15/16
6
6-7/16
6-1/2
6-15/16
7
Shaft
Size
Symbol
207
208
211
212
215
300
307
308
315
400
407
408
415
500
507
515
600
607
608
615
700
Bearing Reference
Guide
Gray Iron Expansion

SAF
Pillow
Housing
Housing
Block
Only
Number
Assy
515
037618
037563
515
037619
037563
516
037620
037564
516
037621
037564
517
037622
037565
517
037623
037565
520
037624
037566
520
037625
037566
522
037626
037567
522
037627
037567
526
037628
037568
526
037629
037568
528
037630
037569
528
037631
037569
532
023603* 042627*
534
023604* 042629*
534
023605* 042629*
536
023606* 042631*
536
023607* 042631*
538
023608* 042633*
538
023609* 042633*
Bearing
Inner
Unit
037636
037637
037638
037639
037640
037641
037642
037643
037644
037645
037646
037647
037648
037649
023610
023611
023612
023613
023614
023615
023616
Pil.
Blk.Wt.
Aprx Lbs
30
30
38
38
45
44
71
70
110
110
140
140
180
180
300
300
300
510
510
520
520
F
Bolt
Dia
Exp*
1/2
1.13
1.25
7.03
4.06
3.25
7.38
9/32
5/8
1.33
1.00
7.67
4.72
3.50
8.31
9/32
1.33
1.25
7.92
4.72
3.75
8.31
9/32
1.63
1.66
9.42
5.50
4.50
10.09
9/32
3/4
1.83
1.78
10.36
6.00
4.94
10.70
11/32
7/8
1.75
2.06
11.83
6.45
6.00
12.45
11/32
2.00
2.06
12.58
7.45
6.00
13.36
11/32
1.92
2.34
14.00
9.38
6.69
15.13
13/32
2.44
2.88
14.38
9.38
7.06
15.13
13/32
2.44
3.00
16.19
11.38
7.50
18.31
13/32
1-1/4
2.75
3.13
16.56
11.38
7.88
18.31
13/32
5/8
3/4
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-61
ACCESSORIES
PAGE B10-64
E-Family Roller
Bearings
Pil.
Blk.Wt.
Aprx Lbs
30
30
38
38
45
44
71
70
110
110
140
140
180
180
300
300
300
510
510
52
0520
Specialty Tapered
Products
Bearing
Inner
Unit
037636
037637
037638
037639
037640
037641
037642
037643
037644
037645
037646
037647
037648
037649
023610
023611
023612
023613
023614
023615
023616
S-2000

Shaft
Shaft
SAF
Pillow
Housing
Size
Size
Housing
Block
Only
Inches # Symbol
Number
Assy
2-7/16
207
515
037604
037548
2-1/2
208
515
037605
037548
2-11/16
211
516
037606
037549
2-3/4
212
516
037607
037549
2-15/16
215
517
037608
037550
3
300
517
037609
037550
3-7/16
307
520
037610
037551
3-1/2
308
520
037611
037551
3-15/16
315
522
037612
037552
4
400
522
037613
037552
4-7/16
407
526
037614
037553
4-1/2
408
526
037615
037553
4-15/16
415
528
037616
037554
5
500
528
037617
037554
5-7/16
507
532
023584
042628
5-15/16
515
534
023585
042630
6
600
534
023586
042630
6-7/16
607
536
023587
042632
6-1/2
608
536
023588
042632
6-15/16
615
538
023589
042634
7
700
538
023590
042634
Consult DODGE For Sizes Not Shown
UNISPHERE II
4-BOLT BASE
IMPERIAL
UNIFIED SAF
Bearing Reference
Guide
TAF Units - Inch
H DIA.
E-Family Roller
Bearings
M
A

grease fitting
Specialty Tapered
Products
TAF S1 Unit Is Used In All Expansion

And Non-Expansion TAF Housings
S-1 UNIT
S-2000
H DIA.
H DIA.
UNISPHERE II
M
A
E
K
K
IMPERIAL
C
B
C
B
S-1 UNIT
S-1 UNIT
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-62
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
S-1 Units - Gray Iron
E-Family Roller
Bearings
S1U509-TAF-107
S1U510-TAF-111
S1U511-TAF-115
S1U513-TAF-203
S1U515-TAF-207
S1U515-TAF-208
S1U516-TAF-211
S1U516-TAF-212
S1U517-TAF-215
S1U517-TAF-300
S1U520-TAF-307
S1U520-TAF-307
S1U522-TAF-315
S1U522-TAF-400
S1U526-TAF-407
S1U526-TAF-408
S1U528-TAF-415
S1U528-TAF-500
S1U-TAF-507R
S1U-TAF-515R
S1U-TAF-600R
S1U-TAF-607R
S1U-TAF-608R
S1U-TAF-615R
S1U-TAF-700R
Specialty Tapered
Products
037632
037633
037634
037635
037636
037637
037638
037639
037640
037641
037642
037643
037644
037645
037646
037647
037648
037649
023610
023611
023612
023613
023614
023615
023616
Weight
Lbs
(Approx)
5
7
8
9
11
11
18
17
17
17
31
31
43
43
57
68
82
82
155
143
138
187
182
180
178
S-2000
Part
Name
NOTE: TAF inserts below 5-7/16 are not interchangeable with TAF-XT housings, with shafts of 5 or less, order DOUBLE-INTERLOCK S-1 units on Page B10-50
Shaft
Size
A
Inches
1-7/16
3.00
1-11/16
3.38
1-15/16
3.50
2-3/16
3.75
2-7/16
4.00
2- 1/2
2-11/16
4.50
2-3/4
2-15/16
4.50
3
3-7/16
5.00
3-1/2
3-15/16
6.25
4
4-7/16
6.75
4-1/2
4-15/16
7.25
5
5-7/16
5-15/16
9.00
6
6-7/16
6-1/2
10.50
6-15/16
7
+.000,-.001
FEATURES/BENEFITS
PAGE B10-2
E
B
Cast
Side
3.31
3.81
4.18
4.56
1.16
1.19
1.50
1.56
Mach.
Side
3.25
3.75
4.13
4.50
2.06
2.31
2.44
2.56
0.75
0.75
0.75
0.75
3.595
4.095
4.502
4.940
2.75
3.19
3.44
3.75
2.50
2.88
2.75
2.95
2.75
1.44
4.81
4.87
0.75
5.156
4.06
3.38
3.00
1.88
5.56
5.63
0.75
6.001
4.72
3.88
3.00
1.88
5.56
5.63
0.75
6.001
4.72
3.88
3.50
2.19
6.81
6.88
0.75
7.313
5.50
4.50
4.50
2.59
7.44
7.40
0.94
7.937
6.00
5.13
4.63
2.56
8.31
8.32
0.94
8.812
6.45
5.50
5.13
3.13
9.56
9.54
0.94
10.124
7.45
6.19
5.88
2.56
11.19
11.19
0.94
11.563 ^
9.38
6.91
7.13
3.00
13.25
13.25
0.94
13.748 ^
11.38
8.00
^.000,-.003
PAGE B10-9
+.0005
EASY SELECTION
PAGE B10-15
B10-63
ACCESSORIES
PAGE B10-64
UNISPHERE II
Part
Number
IMPERIAL
Shaft
Size #
Inches
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2- 1/2
2-11/16
2-3/4
2-15/16
3
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
5-7/16
5-15/16
6
6-7/16
6-1/2
6-15/16
7
UNIFIED SAF
TAF Units - Inch
Bearing Reference
Guide
MODIFICATIONS
ACCESSORIES
Type E-Xtra / Type K / DOUBLE-INTERLOCK /TAF
E-TECT SEAL KITS
E-Family Roller
Bearings
Specialty Tapered
Products
Shaft
Size
Inches
1-3/16 TO 1-1/4
1-3/8 TO 1-7/16
1-1/2 TO 1-11/16
1-3/4 TO 2
2-3/16
2-1/4 TO 2-1/2
2-11/16 TO 3
3-3/16 TO 3-1/2
3-15/16 TO 4
4-7/16 TO 4-1/2
4-15/16 TO 5
5-7/16 TO 6
6-7/16 TO 7
Kit
Part
Number
037650*
037651*
037652*
037653*
037654*
037655*
037656*
037657*
037658*
037659*
037660*
037673**
037674**
V-RING SEAL
STANDARD COLLAR
SMALL E-TECT SEAL

1-3/16 THRU 5"
* Kit includes one collar, set screws and seal

** Kit for 5-7/16 consists of a modified v-ring seal.
This seal can only be used with bearings
produced after September 1995
S-2000
V-RING SEAL
STANDARD COLLAR
**
UNISPHERE II
XTS Sealing with E-Tect Option
IMPERIAL
LARGE E-TECT SEAL

5-7/16 THRU 7"
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-64
PAGE B10-22
Bearing Reference
Guide
MODIFICATIONS
ACCESSORIES
Type E-Xtra
E-Family Roller
Bearings
Type E-Xtra END CLOSURE KITS - INCH
Kit*
Part No.
Flange
2.97
3.22
3.67
3.80
4.06
4.38
4.88
A Dimension (Inch)
Pilot
Flange
1.47
1.66
1.73
1.73
1.88
2.00
2.19
WS
Take-Up
---1.66
1.76
1.92
2.06
2.19
2.44
TP
Take-Up
---------1.98
2.06
2.31
2.44
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-65
PAGE B10-22
UNIFIED SAF
IMPERIAL
UNISPHERE II
1-3/16 TO 1-1/4
023795
1-3/8 TO 1-7/16
023796
1-1/2 TO 1-11/16
023797
1-3/4 TO 2
023798
2-3/16
023799
2-1/4 TO 2-1/2
023800
2-11/16 TO 3
023801
- Consult DODGE For Sizes Not Listed.
* - Kit Includes End Closure And Special Collar.
Pillow
Block
1.56
1.34
1.89
1.95
2.09
2.25
2.44
S-2000
Shaft
Size
Inches
Specialty Tapered
Products
** Seal must be removed before installing the end cover
Bearing Reference
Guide
MODIFICATIONS
ACCESSORIES
Type K, DOUBLE-INTERLOCK and TAF End Covers
E-Family Roller
Bearings
Specialty Tapered
Products
DOUBLE-INTERLOCK SHOWN
K, DI, & TAF
DOUBLE-INTERLOCK SHOWN
K & DI
S-2000
A Dimension
Pillow
Flange
Block
Bearing
1-3/8 TO 1-7/16
037681
1.66
2.84
1-1/2 TO 1-11/16
037682
1.86
3.17
1-3/4 TO 2
037683
1.92
3.30
2-3/16
037684
2.06
3.50
2-1/4 TO 2-1/2
037685
2.19
3.75
2-11/16 TO 3
037686
2.44
4.19
3-3/16 TO 3-1/2
037687
2.69
4.94
3-5/16 TO 4
037688
3.31
5.81
4-7/16 TO 4-1/2
037689
3.56
5.88
4-15/16 TO 5
037690
3.81
6.31
END CLOSURE MOUNTS ON MACHINED OD SIDE OF S-1 UNIT
Shaft
Size
Inches
Part
Number
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-66
PAGE B10-22
When speed only will

be monitored, select the
standard housing.
When vibration, and /
or temperature will be
monitored, select the drilled
housing
All housing part numbers
shown are 4-bolt base, non-expansion
Shaft
Size
Series
207
215
307
315
407
415
507
515
615
515
517
520
522
526
528
532
534
538
Step 2:
Pick An S1 Unit
Smart S-1 units feature

Embedded thermocouple drilled and

tapped holes for prox covers
Special locking collar with prox targets
Step 3:
The Sensor Choices
Standard Housing
Part Numbers
If you are monitoring
speed only
Part #
037548
037550
037551
037552
037553
037554
042628
042630
042634
Drilled Housing
Part Number
For temperature
and/or vibration
Part #
053067
053628
067350
054960
067352
067353
067354
067357
067234
Shaft Size
207
215
307
315
407
415
507
515
615
S1 Unit
055805
055806
055807
049235
055915
055840
067355
067356
067323
TAF Sensor kits
Part
Number
Bearing Reference
Guide
Step 1:
The Housing Choices
Standard Or Drilled
E-Family Roller
Bearings
HOW TO ORDER
Specialty Tapered
Products
TAF - Smart Stock Selections
S-2000
SELECTION
For temperature monitoring, use

thermocouple transmitter.
Prox Covers
Housing Part Number
515
067340
517
067342
520
067343
522
067344
526
067345
528
067346
532
067347
534
067347
538
067348
055943
AC Prox
Thermocouple
Transmitter
Cable Connector Kit
055931
063694
4-20 ma Accelerometer
and Thermocouple
067576
* For additional details on DODGE Smart Bearings, see brochure DMR-2026-6

FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-67
ACCESSORIES
PAGE B10-64
UNIFIED SAF
IMPERIAL
Shaft
207
215
307
315
407
415
507
515
615
UNISPHERE II
For speed monitoring, use AC prox and prox

cover or DC prox and prox cover.
Bearing Reference
Guide
SELECTION
E-Family Roller
Bearings
Type E-Xtra - Metric
SELECTION
METRIC TYPE E-XTRA TAPERED ROLLER BEARINGS

ONLY
DODGE Type E-Xtra Double Row Tapered Roller Bearings have

the capacity to carry heavy radial loads, thrust loads, and combined
radial and thrust loads. The maximum recommended load which can
be applied is limited by various components in the system such as
bearing, housing, shaft, shaft attachment, speed and life requirements
as listed in this catalog. DODGE Unitized Type E-Xtra Roller Bearings
have been applied successfully even when these limits have been
exceeded under controlled operating conditions. Contact DODGE
Application Engineering (864-284-5700) for applications which exceed
the recommendations of this catalog.
1. Define the desired L10 Life, in Hours

2. Establish bearing radial load, FR, kN
3. Establish RPM.
L10 Life, Hours -- The fatigue life which may be expected from at least
90% of a given group of bearings operating under identical conditions.
Specialty Tapered
Products
L10 Life, Hours =
10/3
( )
C90
P
P = Equivalent radial load, kN

(The Dodge program BEST can be used to find application loads.)
Using the easy selection Table 1, Page B10-14 under the RPM column
find the equivalent load that equals or is higher than the application
radial load for the desired life. The shaft size on the far left will be the
minimum shaft size that you can use for your application. If the desired
life is different than the values shown on the chart, use alternate Method
A shown below.
Example: L10 Life = 30,000 Hours

Radial load = 17.5 kN

RPM = 1000
1,500,000
RPM
At the intersection of the 1000 RPM column and at the 30,000 hours
L10 life row, the equivalent radial load of 18 kN exceeds the 17.5kN
application radial load for shaft size 55mm. Therefore, an 55mm E
bearing can be used to meet the application bearing conditions of the
above example:
Where: C90 = Dynamic Capacity (Table 9), kN

FR = P for Pure Radial Load Conditions.
P = Equivalent Radial Load, kN
ALTERNATE METHOD A --SELECTING A BEARING FOR

AN L10 LIFE VALUE NOT SHOWN IN THE EASY SELECTION
CHART.
GENERAL
S-2000
Heavy Service -- For heavy shock loads, frequent shock loads, or

severe vibrations, increase the Equivalent Radial Load up to 50%
(according to severity of conditions) to obtain a Modified Equivalent
Radial Load. Consult Application Engineering at 864-284-5700 for
additional selection assistance.
The L10 life equation can be rearranged so that the bearing dynamic
capacity C90 is identified in terms of L10, RPM and P.
Thrust load values shown in the table below are recommended as

a guide for general applications that will give adequate L10 life. With
substantial radial loads also present, it is advisable to calculate actual
L10 life to assure the bearing meets requirements.
UNISPHERE II
RPM RANGE
20 - 200
201 - 2000
Over
2000
RECOMMENDED
THRUST LOAD
C90/4
C90/8
C90/12
C90 =
L10 X RPM
1,500,000
0.3
X P
The shaft tolerances recommended below are adequate for the

conditions outlined in this catalog. Since the allowable load, especially
at a low speed, is very large, the shaft should be checked to assure
adequate shaft strength.
Since the L10, RPM, and P are known, solve for C90. Select from the
dynamic capacity column on Table 10 the C90 value equal to or greater
than the C90 value just calculated. The bore size on the far left represents
the minimum shaft size selection. Check that the application RPM does
not exceed the MAX. RPM on Table 10. When selecting a L10 life of less
than 30,000 hours particular attention must be paid to shaft deflection
and proper lubricant selection.
IMPERIAL
The magnitude and direction of both the thrust and radial load must be
taken into account when selecting a shaft size. Heavy loads should be
directed through the base. Where uplift loads are involved see Table
13 for maximum values. Where a load pulls the housing away from
the mounting base, both the hold-down bolts and housing must be of
adequate strength. Auxiliary load carrying devices such as shear bars
are advisable for side or end loading of plummer blocks.
Shaft Tolerances
UNIFIED SAF
Shaft Size
Tolerance
Up to 35mm
40 to 100mm
100 - 150mm
160 - 180mm
+.000 - .013mm
+.000 - .025mm
+.000 - .038mm
+.000 - .051mm
FEATURES/BENEFITS
PAGE B10-2
The DODGE Bearing Evaluation and Selection Technique (BEST)

is a menu driven computer program that calculates bearing loads,
fatigue life, and operating temperature for a two bearing shaft system
based on user supplied input parameters. This interactive program is
available at www.ptwizard.com under the Product Selection area.
PAGE B10-9
PAGE B10-22
B10-68
ACCESSORIES
PAGE B10-64
SELECTING BEARINGS SUPPORTING ONLY

THRUST LOADS
P = XFR + YFA (Equation 1)
Where:

P = Equivalent radial load, kN
Type E-Xtra tapered roller bearings are well suited to carry pure thrust
loads. Follow the same selection procedure used above Selecting
Bearings Supporting Both Radial and Thrust Loads except the equation
P = XFR + YFA reduces to P = YFA. (XFR is equal to zero)
FR = Radial load, kN
FA = Thrust (axial) load, kN

Y = Thrust load factor (Table 1)
Table 10: Radial And Thrust Factors For Type E-Xtra Tapered Roller Bearings (Metric)
FA/FR e
Shaft
Size
(MM)
35
40
45, 50
55
60, 65
70, 75
80, 85, 90
100
110,115
125
135,140,150
160,170,180
0.46
0.44
0.33
0.35
0.40
0.45
0.50
0.49
0.53
0.47
0.49
0.54
FA/FR>e
.87
.87
.87
.87
.87
.87
.87
.87
.87
.87
.87
.87
1.89
1.96
2.64
2.38
2.17
1.87
1.71
1.77
1.63
1.83
1.76
1.61
.70
.70
.70
.70
.70
.70
.70
.70
.70
.70
.70
.70
2.28
2.37
3.18
2.87
2.63
2.26
2.07
2.14
1.97
2.21
2.12
1.95
Dynamic
Capacity
C90*
K Newtons
24.5
31.4
41.4
43.8
47.2
49.5
79.0
108.5
133.4
183.8
181.1
307.9
Maximum
RPM
Maximum
Slip Fit Radial
Load, (Fr)K N**
3,820
3,320
3,050
2,730
2,420
2,060
1,640
1,530
1,360
1,200
915
790
22.2
28.5
37.4
39.6
42.2
44.5
71.2
98.0
120.0
164.6
188.6
320.2
COMPARING SPHERICAL TO TAPER ROLLER

BEARING
* C90---Dynamic capacity based on a rated life of 90

million revolutions or 3000 hours at 500 RPM.
The dynamic capacity C (spherical) and C90 (taper) are not to the
same base. To compare basic dynamic capacities, multiply C x
.259 and compare to C90.
** If load exceeds maximum allowable slip fit radial

load (FR), line to line, to-light press fit of shaft
required. Application loads up to maximum slip
fit radial load may be applied if recommended shaft
tolerances are used.
To select and then compare, use the complete selection

procedure for each type bearing and then compare.
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-69
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
E-Family Roller
Bearings
The equivalent radial load
Specialty Tapered
Products
When a bearing supports both a radial load and a thrust load, the
loading on the two rows is shared unequally depending on the ratio of
thrust to radial load. The use of the X (radial factor) and Y (thrust factor)
from Table 9 convert the applied thrust load and radial loads to an
equivalent radial load having the same effect on the life of the bearing as
a radial load of this magnitude.
S-2000
Calculate FA/FR and compare to e for the selected bore size. Determine
X and Y from Table 1 depending on whether FA/FR is equal to or less
than e, or FA/FR greater than e. Substitute all known values into the
equivalent radial load equation. P (equivalent radial load) can be used
in the life formula to determine L10 life in hours or compared to the
allowable equivalent radial load ratings for the speed and hours life
desired in the easy selection table.
UNISPHERE II
SELECTING BEARINGS SUPPORTING BOTH

IMPERIAL
UNIFIED SAF
SELECTION
Bearing Reference
Guide
SELECTION
Table 11 - Easy Selection for Type E-Xtra Metric
Shaft
Size
E-Family Roller
Bearings
35mm
40mm
Specialty Tapered
Products
45mm
50mm
55mm
S-2000
60mm
65mm
70mm
75mm
UNISPHERE II
80mm
85mm
90mm
100mm
L10
Hours
IMPERIAL
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
50
34
24
22
20
17
44
31
29
26
22
58
41
38
34
29
61
44
40
36
31
66
47
43
38
33
69
49
45
40
34
110
79
72
64
55
151
109
100
88
76
100
28
20
18
16
14
36
26
23
21
18
47
34
31
27
23
49
36
33
29
25
53
38
35
31
27
56
40
37
33
28
89
64
59
52
45
123
88
81
72
61
150
24
18
16
14
12
31
23
21
18
16
41
30
27
24
21
44
32
29
26
22
47
34
31
28
24
49
36
33
29
25
79
57
52
46
40
109
78
72
63
54
Allowable Equivalent Radial Load Rating (kN) At Various Revolutions Per Minute
250
500
750
1000
1250
1500
1750
2000
2500
21
17
15
14
13
12
12
11
11
15
12
11
10
9
9
8
8
8
14
11
10
9
9
8
8
7
7
12
10
9
8
8
7
7
7
6
11
9
8
7
6
6
6
6
5
27
22
19
18
17
16
15
14
14
19
16
14
13
12
11
11
10
10
18
14
13
12
11
10
10
10
9
16
13
11
10
10
9
9
8
8
14
11
10
9
8
8
8
7
7
35
29
26
23
22
21
20
19
18
26
21
18
17
16
15
14
14
13
23
19
17
15
14
14
13
13
12
21
17
15
14
13
12
12
11
10
18
14
13
12
11
10
10
10
9
38
31
27
25
23
22
21
20
19
27
22
19
18
17
16
15
14
14
25
20
18
16
15
14
14
13
12
22
18
16
14
14
13
12
12
11
19
15
14
12
12
11
11
10
9
40
33
29
27
25
24
23
22
20
29
24
21
19
18
17
16
16
15
27
22
19
18
16
16
15
14
13
24
19
17
16
15
14
13
13
12
11
11
10
20
16
15
13
13
12
42
34
31
28
26
25
24
23
31
25
22
20
19
18
17
16
28
23
20
18
17
16
16
15
25
20
18
16
15
14
14
13
21
17
15
14
13
12
12
11
68
55
49
45
42
40
38
49
40
35
32
30
28
27
45
36
32
29
28
26
25
40
32
28
26
24
23
22
34
28
24
22
21
20
19
93
76
67
61
57
54
67
54
48
44
41
39
61
50
44
41
38
36
54
44
39
36
34
32
47
38
34
31
29
27
2700
10
7
7
6
5
13
10
9
8
7
17
13
11
10
9
18
13
12
11
9
3000
10
7
7
6
5
13
9
8
7
6
17
12
11
10
8
18
13
12
10
9
For Maximum RPM See Table 1 on Page B10-14

In the Shaded Area E, DI & TAF Mounted Unites Required Line-To-Line Press Fit to Shaft:
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-70
ACCESSORIES
PAGE B10-64
3500
10
7
6
6
5
12
9
8
7
6
Bearing Reference
Guide
SELECTION
Table 11 - Easy Selection for Type E-Xtra Metric
135mm
140mm
150mm
160mm
170mm
180mm
100
151
108
99
88
76
208
149
137
121
104
205
145
135
120
100
345
250
230
205
175
150
133
96
88
78
67
184
132
121
107
92
180
130
120
105
90
305
220
205
180
155
Allowable Equivalent Radial Load Rating (kN) At Various Revolutions Per Minute
250
500
750
1000
1250
1500
1750
2000
2500
114
93
82
76
71
82
67
59
54
51
76
61
54
50
47
67
54
48
44
41
57
47
41
38
35
158
128
113
104
97
113
92
82
75
70
104
84
75
69
64
92
75
66
61
57
79
64
57
52
49
155
125
110
100
110
90
80
75
100
85
75
65
90
75
65
60
75
65
55
50
265
215
190
190
155
135
175
140
125
155
125
110
130
105
95
2700
3000
3500
E-Family Roller
Bearings
125mm
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
50
186
133
122
108
93
255
184
169
149
128
250
180
165
145
125
430
305
280
250
215
Specialty Tapered
Products
110mm
115mm
L10
Hours
IMPERIAL
UNISPHERE II
S-2000
For Maximum RPM See Table 1 on Page B10-14

In the Shaded Area E, DI & TAF Mounted Unites Required Line-To-Line Press Fit to Shaft:
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-71
ACCESSORIES
PAGE B10-64
UNIFIED SAF
Shaft
Size
Bearing Reference
Guide
SELECTION
Type E-Xtra
LUBRICATION
Operation in Presence of Dust, Water or Corrosive Vapors
E-Family Roller
Bearings
DODGE Type E-Xtra Metric Tapered Roller Bearings are

lubricated at the factory with Mobil Mobilgrease XHP222, a
superior industrial grease using a lithium complex thickener
and a highly refined base oil. This grease will adequately handle
low and medium speeds with low and medium loads at normal
temperatures as defined on Table 15. For very low and high
speeds, for heavy loads and for low and high temperatures,
special greases must be used. Contact DODGE Application
Engineering (864) 284-5700. DODGE engineers will recommend
bearings and lubricants for the unusual conditions. DODGE also
has the expertise to custom design and build special bearings
for your needs.
Specialty Tapered
Products
High Speed Operation --- In the higher speed ranges too much
grease will cause overheating. The amount of grease that the bearing
will take for particular high speed application can only be determined by
experience. If excess grease in the bearing caused overheating, it will
be necessary to remove grease fitting (also drain plug when furnished)
to permit excess grease to escape. When establishing a relubrication
schedule, note that a small amount of grease at frequent intervals is
preferable to a large amount at infrequent intervals.
--- Under these conditions the bearing should contain as much grease
as speed will permit, since a full bearing with consequent slight leakage
is the best protection against entrance of foreign material. In the higher
speed ranges too much grease will cause overheating --- see High
Speed Operation. In the lower speed ranges, it is advisable to add extra
grease to a new bearing before putting into operation. Bearings should
be greased as often as necessary (daily if required) to maintain a slight
leakage at the seals.

bearings are installed, unless precautions are taken to line
the bearings up, both vertically and horizontally, it is possible
to induce heavy loads. To ensure good alignment, mounting
surfaces must be checked for flatness and must lie in the same
plane. When tightening base bolts and cap bolts, each bolt
should be alternately tightened in incremental torque values
until full torque is achieved to prevent the angular shifting of the
pillow block that occurs when one bolt is tightened to its full
torque. Shimming may be required to minimize misalignment.
S-2000
Table 12 - Relubrication Schedule

Hours Run
Per Day
UNISPHERE II
8
16
24
1 To 250
RPM
12
12
10
251 To 500
RPM
12
7
5
501 To 750
RPM
10
5
3
Suggested Lubrication Period In Weeks

751 To 1000
1001 To 1500
1501 To 2000
RPM
RPM
RPM
7
5
4
4
2
2
2
1
1
2001 To 2500
RPM
3
2
1
2501 To 3000
RPM
2
1
1
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-72
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
SELECTION
E-Family Roller
Bearings
180
0
Table 13 - Type Housing Ratings, Gray Iron
Specialty Tapered
Products
35
40
45, 50
55
60, 65
70, 75
80, 85, 90
100
110,115
125
135,140,150
160,170,180
Maximum Housing Cap Loads,

kN
P180
14
13
23
16
29
31
70
72
93
116
194
204
S-2000
Bore Size
MM
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
PAGE B10-22
B10-73
IMPERIAL

OVER 70% OF C90
-75C TO - 10C
ABOVE - 10C TO 100C
ABOVE 100C TO 150C
ABOVE 150C TO 205C
ACCESSORIES
PAGE B10-64
UNIFIED SAF
LOW SPEED
MEDIUM SPEED
HIGH SPEED
LIGHT LOAD
NORMAL LOAD
HEAVY LOAD
LOW TEMPERATURE
MEDIUM TEMPERATURE
HIGH TEMPERATURE
UNISPHERE II
Table 14 - Definition Of Operating Conditions For Tapered Roller Bearings
Bearing Reference
Guide
Type E-Xtra - Plummer Block - Metric
2 & 4 BOLT BASE
30
E-Family Roller
Bearings
G
J1
Specialty Tapered
Products
F BOLT DIA.
M
H
D MIN
D MAX
S-2000
UNISPHERE II
A
J
A
J
IMPERIAL
35mm THRU 75mm CONSTRUCTION

UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
80 mm THRU 125 mm CONSTRUCTION
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-74
ACCESSORIES
PAGE B10-64
Part
Number
023632
023633
023634
023635
023636
023637
023638
023639
023640
023641
Part
Name
P4B-E-100MR
P4B-E-110MR
P4B-E-115MR
P4B-E-125MR
P4B-E-135MR
P4B-E-140MR
P4B-E-150MR
P4B-E-160MR
P4B-E-170MR
P4B-E-180MR
Weight Lbs.
(Approx.)
69
85
91
136
245
240
235
355
345
345
Type E-Xtra Plummer Blocks, 2-Bolt Base

Shaft
Size
(mm)
35mm
40mm
45mm
50mm
55mm
60mm
65mm
70mm
75mm
80mm
85mm
90mm
D
Min.
Max
F
Bolts
J1
54.0
60.0
142.8
155.5
149.2
161.9
M12
M12
19
19
29
32
101.6
113.5
70
81
47.6
54.0
225.0
64.0
174.6
181.0
M16
22
33
119
87
57.2
95.3
244.0
67.0
193.7
200.0
M16
22
38
131.4
95
63.5
101.6
267.0
73.0
212.7
219.0
M16
22
41
142.8
103
69.9
114.3
305.0
76.0
236.5
246.0
M20
27
48
161.1
120
79.4
127.0
356.0
89.0
274.6
284.2
M20
30
57
190.5
139.7
95.3
76.2
85.7
187.0
200.0
88.9
Type E-Xtra Plummer Blocks, 4-Bolt Base

Shaft
Size
(mm)
100mm
110mm
115mm
125mm
135mm
140mm
150mm
160mm
170mm
180mm
F
Bolts
J1
323.9
57.2
M20
28
62
216
152.4
108.0
336.6
349.3
63.5
M20
28
70
238
164
120.7
130
387.4
400.0
73.0
M24
32
76
276
189
139.7
559
159
441.3
485.8
95.3
M24
51
83
335
238
169.9
660
181
539.8
590.6
117.5
M24
51
94
379
289
190.5
158.8
387
171.5
Min.
Max
114
311.2
422
117
184.2
470
228.6
266.7
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-75
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
Shaft Size
(mm)
100mm
110mm
115mm
125mm
135mm
140mm
150mm
160mm
170mm
180mm
E-Family Roller
Bearings
Weight Lbs.
(Approx.)
7
10
12
12
15
20
20
29
27
49
47
45
Specialty Tapered
Products
Type E-Xtra Plummer Blocks, 4-Bolt
Part
Name
P2B-E-035MR
P2B-E-040MR
P2B-E-045MR
P2B-E-050MR
P2B-E-055MR
P2B-E-060MR
P2B-E-065MR
P2B-E-070MR
P2B-E-075MR
P2B-E-080MR
P2B-E-085MR
P2B-E-090MR
S-2000
Part
Number
023620
023621
023622
023623
023624
023625
023626
023627
023628
023629
023630
023631
UNISPHERE II
Type E-Xtra Plummer Blocks, 2-Bolt

Shaft Size
(mm)
35mm
40mm
45mm
50mm
55mm
60mm
65mm
70mm
75mm
80mm
85mm
90mm
IMPERIAL
Type E-Xtra - Plummer Block - Metric
UNIFIED SAF
Bearing Reference
Guide
DOUBLE-INTERLOCK - Metric
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-76
ACCESSORIES
PAGE B10-64
Bearing Reference
Guide
DOUBLE-INTERLOCK - Metric
Metric Double Interlock S-1 Units - Fray Iron
For housing references see the following pages: Pillow Blocks (B10-22 - B10-25) Flange Bearings (B10-26 - B10-29)
E
Shaft
H
Size
A
B
C
Mach
Cast
K
Dia
(mm)
Size
Size
35mm
3.00
2.063
1.156
3.250
3-5/16
0.688
3.625
40mm
3.375
2.313
1.188
3.750
3-13/16
0.688
4.125
45mm
3.500
2.875
1.500
4.125
4-3/16
0.688
4.562
50mm
55mm
3.750
2.563
1.563
4.500
4-5/8
0.688
5.000
60mm
4.000
2.750
1.438
4.812
4-7/8
0.688
5.186
65mm
70mm
4.500
3.000
1.875
5.563
5-5/8
0.688
6.061
75mm
80mm
85mm
5.000
3.500
2.00
6.813
6-7/8
0.688
7.373#
90mm
100mm
6.250
4.500
2.375
7.438
7-1/2
0.313
7.997#
110mm
6.750
4.625
2.375
8.313
8-3/8
0.313
8.872#
115mm
125mm
7.250
5.125
2.875
9.563
9-5/8
0.313
10.184#
All Dimensions Are Shown In Inches
+.000 to -.001
# +/-.0005
FEATURES/BENEFITS
PAGE B10-2
PAGE B10-9
EASY SELECTION
PAGE B10-15
B10-77
E-Family Roller
Bearings
Specialty Tapered
Products
S1U-DI-035M
S1U-DI-040M
S1U-DI-045M
S1U-DI-050M
S1U-DI-055M
S1U-DI-060M
S1U-DI-065M
S1U-D9-070M
S1U-DI-075M
S1U-DI-080M
S1U-DI-085M
S1U-DI-090M
S1U-DI-100M
S1U-D1-110M
S1U-DI-115M
S1U-DI-125M
2.750
3.188
2.640
2.890
3.438
3.100
3.750
3.320
4.063
3.410
4.719
3.850
5.531
4.510
6.125
5.160
6.438
5.600
7.438
6.260
ACCESSORIES
PAGE B10-64
S-2000
023700
023701
023702
023703
023704
023705
023706
023707
023708
023709
023710
023711
023712
023713
023714
023715
Weight
Lbs
(Approx)
5
6
8
8
10
11
10
17
17
33
32
31
42
55
71
85
UNISPHERE II
Part
Name
IMPERIAL
Part
Number
UNIFIED SAF
Shaft
Size
#
35mm
40mm
45mm
50mm
55mm
60mm
65mm
70mm
75mm
80mm
85mm
90mm
100mm
110mm
115mm
125mm
Bearing Reference
Guide
NOTES
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
B10-78
Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-2
Special Duty, Hinged Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-3
All Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-4
Specifications

Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-5
Special Duty, Hinged Cap & Traction Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-20
All Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-46
How to Order

Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-6
Special Duty, Hinged Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-21
All Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-47
Nomenclature

Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-6
All Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-48
Selection

Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-7
All Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-49
Bearing Reference
Guide
Features / Benefits
E-Family Roller
Bearings
Specialty Tapered Products
Specialty Tapered
Products
CONTENTS
UNISPHERE II

Type C

Pillow Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-8
Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-12
Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-14
Take-Ups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-16

Hanger Bearings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-18

Special Duty

Pillow Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-30
Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-36
Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-38

Hinged Caps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-42

Traction Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-45

All Steel

Pillow Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-54

Cartridge Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B11-56
S-2000
Selection / Dimensions
UNIFIED SAF
IMPERIAL
B11-1
Bearing Reference
Guide
FEATURES/BENEFITS
TYPE C
Positive Concentric
Clamp Sleeve Mounting
Steel Multiple Labyrinth Seals

E-Family Roller
Bearings
2 Quality Single Row

Tapered Roller Assemblies
Rugged Two-Piece Housing
Elongated Bolt Holes
2-1/2 to 5 NE Construction Shown,
Expansion also Available
Specialty Tapered
Products
CLAMP SLEEVE MOUNTING Two quality single row tapered bearings press fitted on sleeve
Outer races shouldered against rib in housing
S-2000
Offers improved concentricity over other collar mounted types of

bearings
Best bearing unit for wheel or sprocket applications
Two piece split collars used on 2-1/2 and larger sizes
Single piece split collars, used on smaller sizes
Performs flinger like function keeping many materials away from seal
UNISPHERE II
STEEL MULTIPLE LABYRINTH SEALS

Combine with collars offering excellent resistance to keep
contaminants out of the bearing
Seal bearing both on and off the shaft before, during and after
installation
Especially well suited on applications where dirt and dust are severe

IMPERIAL
RUGGED TWO PIECE OUTER HOUSING

Split housing of heavy duty gray iron construction houses completely
assembled inner unit
Elongated bolt holes provide lateral adjustment for ease of installing
pillow blocks
UNIFIED SAF
B11-2
Bearing Reference
Guide
Quality Duplex Tapered

Roller Bearing
Tapered Adapter Sleeve
Mounting
Effective Piston Ring Seals
Rugged Two-Piece Housing
1-3/8 to 3-1/2 NE Type

Construction Shown
Elongated Bolt Holes
SPECIAL DUTY PILLOW BLOCKS

DUAL PISTON RING SEALS Contained within self aligning inner unit, to be unaffected by misalignment
Seal bearing both on and off the shaft before, during and after installation
E-Family Roller
Bearings

SPECIAL DUTY
Specialty Tapered
Products
FEATURES/BENEFITS
A split tapered adapter sleeve extending thru the entire length of the pillow
block is used to securely fasten the bearing to the shaft tighter than shorter
adapter sleeves
A single adapter nut is used on sizes 3-1/2 and smaller with two adapter
nuts being used on the larger sizes. The adapter nut at the large end of the
taper can be used to remove the bearing from the shaft

DUPLEX TAPERED ROLLER BEARING
Uses case hardened inner race, outer races and rollers with adapter sleeve
mounting resulting in unsurpassed load handling capability and longer
useful bearing life
UNISPHERE II
TAPERED ADAPTER SLEEVE MOUNTING
S-2000
Extremely close clearances to exclude most materials from entering

bearings

Split housing of heavy duty gray iron construction houses completely

assembled inner unit
IMPERIAL
Handles any combination of radial and thrust load from 100% radial load to
100% thrust load
UNIFIED SAF
Elongated bolt holes provide lateral adjustment for ease of installing pillow
blocks
B11-3
Bearing Reference
Guide
FEATURES/BENEFITS
ALL STEEL
Quality Duplex Tapered Roller Bearing
Tapered Adapter Sleeve Mounting
E-Family Roller
Bearings
Dual Piston Ring Seals

Solid One-Piece Cast Steel Housing
Specialty Tapered
Products
DUPLEX TAPERED ROLLER BEARING

Uses case hardened inner race, outer races and rollers with adapter sleeve
mounting resulting in unsurpassed load handling capability and longer
useful bearing life.
Handles any combination of radial and thrust load from 100% radial load to
100% thrust load
S-2000

TAPERED ADAPTER SLEEVE MOUNTING
A split tapered adapter sleeve extending thru the entire length of the pillow
block is used to securely fasten the bearing to the shaft tighter than shorter
adapter sleeves
UNISPHERE II
Two ductile iron adapter nuts are used with the All Steel pillow blocks. The
adapter nut at the small end of the taper is used to tighten the bearing to
the shaft with the adapter nut at the large end of the taper used to remove
the bearing from the shaft.
DUAL PISTON RING SEALS

Dual piston ring seals are housed in accurately machined grooves in the
adapter nuts resulting efficient labyrinth sealing action throughout the full
range of misalignment.
IMPERIAL
Seal bearing both on and off the shaft before, during and after installation


Vertically split housing of heavy duty cast steel ribbed construction houses
duplex tapered roller bearing.
Elongated bolt holes provide lateral adjustment for ease of installing pillow
blocks
UNIFIED SAF
B11-4
The Type C mounted bearing has indirect mounted tapered

roller bearings press fitted on a common sleeve with the outer
race shouldered against a rib in the housing. The tapered roller
bearings used in the Type C mounted bearings all have case

carburized inner races (cones), outer races (cups) and rollers.
The Type C bearing is mounted to the shaft by clamping the
sleeve to the shaft at the slotted threaded end of the sleeve
with flinger collars. These collars are one piece construction for
sizes thru 2-1/2, with larger sizes using collars of two piece
construction. The bearing rating for the type C is determined by
the sleeve resulting in a L10 life at maximum speed of at least
100,000 hours.
Steel multiple labyrinth seals are used to offer extra resistance
to keep contaminants out of the bearing before, during, and
after installation.
Specialty Tapered
Products
The standard housing material for Type C mounted bearings is

ASTM A48 Class 30 Iron having a minimum tensile strength of
30,000 psi. The outer housings for the pillow blocks and flange
bearings are of split construction for ease of replacement of
the completely assembled, adjusted and lubricated inner units.
The housings for the take-ups, hanger bearings, D, S-1 and
B-1 units are of solid one piece construction. Pillow blocks
and flange bearings are available in both expansion and nonexpansion styles. Take up and hanger bearings are available as
non expansion only.
TYPE C AVAILABLE IN
PILLOW BLOCKS, 2 BOLT BASE
1-3/16 TO 3-7/16
PILLOW BLOCKS, 4 BOLT
2-3/8 TO 4-15/16
FLANGE BEARINGS 4 BOLT
1-3/16 TO 3-7/16
ALL IN EITHER EXPANSION OR NON-EXPANSION
HANGER BEARINGS
TAKE-UP BEARINGS
Bearing Reference
Guide
Type C
E-Family Roller
Bearings
SPECIFICATION
FEATURES/BENEFITS
PAGE B11-2
D, S-1 OR B-1 UNITS
1-3/16 TO 4-15/16
PAGE B11-6
EASY SELECTION
PAGE B11-7
B11-5
PAGE B11-8
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
1-15/16 TO 3-7/16
1-3/16 TO 2-15/16
Bearing Reference
Guide
HOW TO ORDER
Type C
E-Family Roller
Bearings

order processing.
grease provided is Mobil Grease XHP222. Special lubricant


order by description, use the nomenclature key shown below
and add any special instructions to the end of the description
for options not covered by the nomenclature.
Example:
065294 except with Mobil Grease HTS #2 grease
or
P2B-C-207 except with Mobil Grease HTS #2 grease
Specialty Tapered
Products
Special Bearing Requirements And Special

Lubricants
Other Special Requirements Not Listed
DODGE Type C Bearings are factory adjusted and prelubricated. For applications where extreme ambient
temperatures, high speeds or high loads are expected, a variety
of specialty lubricants and adjustments are available. Standard

encourage you to contact our Customer Order Engineering
S-2000
NOMENCLATURE
Type C, Special Duty and All Steel
P2B - C - 207 - E
HOUSING STYLE
STYLE
UNISPHERE II
P2B = PILLOW BLOCK

2 BOLT, CAST IRON
BEARING TYPE
SIZE
C = TYPE C
INCHES & 16TH

2 = 2 INCHES
07 = 7/16 INCHES
OR
207 = 2-7/16
SD = SPECIAL DUTY
P4B = PILLOW BLOCK
4 BOLT, CAST IRON
SP4B = PILLOW BLOCK
4 BOLT, CAST STEEL
HC = HINGED CAP
OTHER DATA
E = EXPANSION
TYPE BEARING
IF E DOES NOT APPEAR AFTER SEAL
TYPE, THEN BEARING IS NON-EXPANSION
TYPE
TRW - TRACTION WHEEL

AS = ALL STEEL
F4B = FLANGE BEARING

4 BOLT, CAST IRON
IMPERIAL
B1U = B-1 UNIT, CAST IRON

DU = D UNIT, CAST IRON
S1U = S-1 UNIT, CAST IRON
CRT = CARTRIDGE UNIT
DUCTILE IRON END PLATES
UNIFIED SAF
NSTU = NARROW SLOT TAKE UP

BEARING, CAST IRON
HNG = HANGER BEARING CAST IRON
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
SELECTION
PAGE B11-7
B11-6
PAGE B11-8
Type C bearings are primarily utilized on radial load applications.

They have ample thrust capacity for use as the locating bearing
normally encountered with this type service. If heavy thrust
loads are involved, Application Engineering should be contacted
for a review of the application. The maximum thrust load should
not exceed Type C pillow block limits shown in Table 3.
Since these ratings are considerably less than the base
bearing ratings, the resulting life expectancy is, for all practical
purposes, contingent only on proper lubrication.
Table 1: Type C Radial Load Ratings

Max.
RPM
3000
3000
2500
2500
2000
Shaft Size
Inches
2-1/2 - 2-15/16
3 - 3-7/16
3-1/2 - 4
4-7/16 - 4-1/2
4-15/16 - 5
2-Bolt
Pillow Block
3/16
5/8
5/8
5/8
5/8
3/4
3/4
----
Type C
4-Bolt
Pillow Block
----5/8
5/8
3/4
3/4
3/4
3/4
Radial Load
Rating (Lbs.) *
3000
4000
5500
6500
7500
Max.
RPM
1750
1500
1250
1000
750
S-2000
Shaft Size
Radial Load
Inches
Rating (Lbs.) *
1-3/16 - 1-7/16
725
1-1/2 - 1-3/4
1000
1-15/16
1350
2 - 2-1/4
1700
2-3/8 - 2-7/16
2100
* More than 100,000 L10 hours life at Max. RPM listed.
Table 2: Type C Expansion Capability, Inches
1-3/16 - 1-7/16
1-1/2 - 1-3/4
1-15/16
2 - 2-1/4
2-3/8 - 2-7/16
2-1/2 - 2-15/16
3 - 3-7/16
3-1/2 - 4
4-7/16 - 4-1/2
4-15/16 - 5
Flange
3/16
1/4
1/4
1/4
1/4
5/8
1/4
1/4
5/8
5/8
UNISPHERE II
Shaft Size,
Inches
Table 3: Type C Pillow Block Permissible Thrust Load

Thrust loads, lbs
Thrust loads, lbs
Shaft Size,
Inches
2-Bolt
4-Bolt
2-Bolt
4-Bolt
1-3/16 - 1-7/16
3000
-2-1/2 - 2-15/16
6900
9300
1-1/2 - 1-3/4
3150
-3 - 3-7/16
5700
12000
1-15/16
5000
-3-1/2 - 4
-12000
2 - 2-3/16
5000
-4-7/16 - 4-1/2
-12000
2-3/8 - 2-7/16
7300
10000
4-15/16 - 5
-16500
* The limits in above apply to pillow blocks. For thrust loads larger than listed or heavy thrust loading on other style housings, contact DODGE Engineering for recommendation.
Shaft Size,
Inches
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
PAGE B11-6
B11-7
PAGE B11-8
IMPERIAL
Sleeve capacity being independent of speed, the table gives

maximum recommended bearing loads at all allowable speeds
and is based on the use of shafting tolerances from Table 18 on

page B20-14.
UNIFIED SAF
The capacity of the Type C bearing is designed to handle loads

normally imposed on the shaft. However, due to the assembly
method and method of fastening the bearing to the shaft, there
are necessary clearances between the sleeve and the shaft
except at the two ends. Consequently, under heavy loads a
flexing and stressing of the sleeve will take place as the shaft
rotates. For this reason, the Radial Load Ratings shown in Table
1 are based on the sleeve capacity under maximum clearance
conditions rather than on the capacity of the roller bearings
themselves.
Bearing Reference
Guide
Type C Bearing
E-Family Roller
Bearings
Type C
Specialty Tapered
Products
SELECTION
Bearing Reference
Guide
Type C Pillow Block - Inch
2-BOLT BASE
P
E-Family Roller
Bearings
G
J
Specialty Tapered
Products
F BOLT DIA.
M
H
D MIN
D MAX
B
S-2000
NOTE: All sizes use

a 1/8 - 27 NPT
hydraulic grease fitting
UNISPHERE II
A
L
IMPERIAL
NON-EXPANSION CONSTRUCTION
EXPANSION CONSTRUCTION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
PAGE B11-6
B11-8
SELECTION
PAGE B11-7
Bearing Reference
Guide
2-BOLT BASE
B*
Max.
S-2000
Min.
F
Bolt
Dia.
C*
Weight
Lbs
(Approx)
22
22
20
28
28
28
29
49
49
49
57
90
90
90
90
135
135
131
G*
H*
P*
EXP**
4.50
9.00
3.00
6.88
7.63
1/2
1.00
2.13
6.25
3.09
2.88
5.88
3/16
4.88
9.50
3.38
7.38
8.13
1/2
0.81
2.38
6.81
3.50
3.13
6.50
5/8
5.25
11.00
3.50
8.50
9.00
5/8
1.25
2.50
7.13
3.88
3.25
7.38
5/8
5.75
12.00
4.00
9.25
10.25
5/8
1.18
2.88
8.00
4.38
3.75
8.00
5/8
6.00
13.25
4.25
10.13
11.38
3/4
1.50
3.00
8.56
4.66
4.00
8.88
5/8
6.50
14.25
4.75
11.13
12.38
3/4
1.50
3.75
9.88
5.44
4.75
9.88
3/4
7.00
16.75
5.50
13.75
14.25
7/8
1.50
4.00
11.38
5.94
5.50
11.63
3/4
NOTE: All sizes use a 1/8 - 27 NPT hydraulic grease fitting
* These Are As Cast Surfaces. Dimensions May Fluctuate Due To Draft

Angles And Pattern Shifts
A One-piece Collar Furnished Up Thru 2-7/16 Sizes. Larger Sizes Use A

Two-piece Collar.
** EXP - Total Expansion For Expansion Bearing Only
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
PAGE B11-6
B11-9
SELECTION
PAGE B11-7
UNISPHERE II
Gray Iron Expansion

Shaft
Part
Part
Size
Number
Name
Inches#
1-3/16
087262
P2B-C-103E
1-1/4
087263
P2B-C-104E
1-7/16
087180
P2B-C-107E
1-1/2
087264
P2B-C-108E
1-11/16
087181
P2B-C-111E
1-3/4
087172
P2B-C-112E
1-15/16
087182
P2B-C-115E
2
087265
P2B-C-200E
2-3/16
087183
P2B-C-203E
2-1/4
087266
P2B-C-204E
2-7/16
087184
P2B-C-207E
2-1/2
087267
P2B-C-208E
2-11/16
087185
P2B-C-211E
2-7/8
087178
P2B-C-214E
2-15/16
087186
P2B-C-215E
3
087268
P2B-C-300E
3-3/16
087269
P2B-C-303E
3-7/16
087187
P2B-C-307E
# Consult Dodge For Sizes Not Listed.
IMPERIAL
Shaft
Size
Inches
1-3/16
1-1/4
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-7/8
2-15/16
3
3-3/16
3-7/16
Weight
Lbs
(Approx)
21
20
20
28
28
26
29
47
47
47
57
83
83
83
83
132
132
128
UNIFIED SAF
Gray Iron Non-Expansion*

Shaft
Part
Part
Size
Number
Name
Inches#
1-3/16
065289
P2B-C-103
1-1/4
065311
P2B-C-104
1-7/16
065290
P2B-C-107
1-1/2
065312
P2B-C-108
1-11/16
065291
P2B-C-111
1-3/4
065238
P2B-C-112
1-15/16
065292
P2B-C-115
2
065313
P2B-C-200
2-3/16
065293
P2B-C-203
2-1/4
065314
P2B-C-204
2-7/16
065294
P2B-C-207
2-1/2
065315
P2B-C-208
2-11/16
065295
P2B-C-211
2-7/8
065244
P2B-C-214
2-15/16
065296
P2B-C-215
3
065316
P2B-C-300
3-3/16
065317
P2B-C-303
3-7/16
065297
P2B-C-307
* Furnished Unless Otherwise Specified
E-Family Roller
Bearings
Specialty Tapered
Products
Bearing Reference
Guide
4-BOLT BASE
P
E-Family Roller
Bearings
E
J
Specialty Tapered
Products
F BOLT DIA.
M
H
D MIN
D MAX
B
S-2000

grease fitting
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
PAGE B11-6
B11-10
SELECTION
PAGE B11-7
Bearing Reference
Guide

Shaft
Part
Part
Size
Number
Name
Inches#
2-7/16
065310
P4B-C-207
2-15/16
065302
P4B-C-215
3-7/16
065303
P4B-C-307
3-15/16
065298
P4B-C-315
4-7/16
065299
P4B-C-407
4-15/16
065300
P4B-C-415
Weight
Lbs
(Approx)
59
85
130
230
280
370
E
2.50
2.75
3.25
3.25
3.50
3.75
F
Bolt
G*
H*
J
L
M
Dia.
5/8
1.50
3.00
8.50
4.66
4.00
5/8
1.50
3.75
9.88
5.44
4.75
3/4
1.50
4.00
11.38
5.94
5.50
7/8
1.50
4.00
13.38
7.38
6.38
7/8
1.88
4.00
14.50
8.38
7.25
1
2.13
4.25
15.63
9.38
7.50
* These Are As Cast Surfaces. Dimensions May Fluctuate Due To Draft

Angles And Pattern Shifts
Weight
Lbs
(Approx)
59
85
135
230
290
380
P*
Exp**
8.88
9.88
11.63
13.88
15.25
16.75
5/8
5/8
3/4
3/4
3/4
3/4
** EXP - Total Expansion For Expansion Bearing Only
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
PAGE B11-6
B11-11
SELECTION
PAGE B11-7
UNIFIED SAF
IMPERIAL
UNISPHERE II
Shaft
D
Size
A
B*
C*
Inches
Min.
Max.
2-7/16
6.00
13.25
4.25
10.00
11.50
2-15/16
6.50
14.25
4.75
11.00
12.50
3-7/16
7.00
16.75
5.50
12.88
14.63
3-15/16
9.50
19.00
7.00
15.00
16.00
4-7/16
10.00
20.00
7.50
15.63
17.38
4-15/16
11.25
23.00
8.25
17.75
19.75
A One-piece Collar Furnished Up Thru 2-7/16 Sizes. Larger Sizes Use A
Two-piece Collar.
Gray Iron Expansion

Shaft
Part
Part
Size
Number
Name
Inches#
2-7/16
087191
P4B-C-207E
2-15/16
087192
P4B-C-215E
3-7/16
087193
P4B-C-307E
3-15/16
087188
P4B-C-315E
4-7/16
087189
P4B-C-407E
4-15/16
087190
P4B-C-415E
E-Family Roller
Bearings
4-BOLT BASE
Specialty Tapered
Products
S-2000
Bearing Reference
Guide
Type C Flange Bearing - Inch
E-Family Roller
Bearings
C
E
F BOLT DIA.
D
B
Specialty Tapered
Products
H
E
J
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
PAGE B11-6
B11-12
SELECTION
PAGE B11-7
Bearing Reference
Guide
F
Bolt Dia.
Exp*
7.00
0.75
1/2
0.63
4.95
3.09
3/16
7.63
0.75
1/2
0.69
5.39
3.50
1/4
8.38
9.13
10.25
11.25
12.5
0.88
0.88
0.88
0.94
0.81
5/8
5/8
3/4
3/4
7/8
0.75
0.81
0.88
1.00
1.13
5.92
6.45
7.25
7.96
8.839
3.88
4.38
4.66
5.44
5.94
1/4
1/4
1/4
5/8
1/4
Weight
Lbs
(Approx)
21
31
31
38
49
63
98
140
140
* EXP - Total Expansion For Expansion Bearing Only.
E-Family Roller
Bearings
Gray Iron Expansion

Shaft
Part
Part
Size
Number
Name
Inches#
1-7/16
104050
F4B-C-107E
1-11/16
104051
F4B-C-111E
1-3/4
104078
F4B-C-112E
1-15/16
104052
F4B-C-115E
2-3/16
104053
F4B-C-203E
2-7/16
104054
F4B-C-207E
2-15/16
104055
F4B-C-215E
3
104090
F4B-C-300E
3-7/16
104056
F4B-C-307E
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
PAGE B11-6
B11-13
SELECTION
PAGE B11-7
UNIFIED SAF
IMPERIAL
Shaft
Size
A
B
C
Inches
1-7/16
4.50
8.25
3.00
1-11/16
4.88
9.00
3.38
1-3/4
1-15/16
5.25
10.00
3.50
2-3/16
5.75
10.75
4.00
2-7/16
6.00
12.00
4.25
2-15/16
6.50
13.00
4.63
3
7
14.50
5.375
3-7/16
A One-Piece Collar Furnished Up Thru 2-7/16 Sizes.
Larger Sizes Use A Two-Piece Collar.
Weight
Lbs
(Approx)
21
31
31
37
49
63
98
140
140
Specialty Tapered
Products

Shaft
Part
Part
Size
Number
Name
Inches#
1-7/16
104040
F4B-C-107
1-11/16
104041
F4B-C-111
1-3/4
104106
F4B-C-112
1-15/16
104042
F4B-C-115
2-3/16
104043
F4B-C-203
2-7/16
104044
F4B-C-207
2-15/16
104045
F4B-C-215
3
104119
F4B-C-300
3-7/16
104046
F4B-C-307
S-2000
Type C Flange Bearing - Inch
UNISPHERE II
Bearing Reference
Guide
Type C Units - Inch
1-1/4" DIA.
G HEX
H HEX
O
E-Family Roller
Bearings
M
A
J
A
Specialty Tapered
Products
S-1 UNIT
USED IN EXPANSION
HOUSINGS
D UNIT
USED IN NON-EXPANSION
HOUSINGS
Shaft
Size
Inches #
S-2000
UNISPHERE II
IMPERIAL
Part
Number
1-7/16
065282
1-1/2
065258
1-11/16
065283
1-3/4
065260
1-15/16
065284
2
065262
2-3/16
065285
2-1/4
065265
2-7/16
065286
2-1/2
---2-11/16
065268
2-7/8
065270
2-15/16
065287
3
065271
3-3/16
---3-1/4
---3-7/16
065288
3-1/2
065274
3-11/16
---3-15/16
065304
4
---4-7/16
065305
4-15/16
065306
#Consult Dodge For Sizes Not Listed.
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-2
D Units
Part
Name
DU-C-107
DU-C-108
DU-C-111
DU-C-112
DU-C-115
DU-C-200
DU-C-203
DU-C-204
DU-C-207
---DU-C-211
DU-C-214
DU-C-215
DU-C-300
------DU-C-307
DU-C-308
---DU-C-315
---DU-C-407
DU-C-415
Type C Units - Inches

S-1 Units
Part
Part
Number
Name
087199
S1U-C-107
087205
S1U-C-108
087200
S1U-C-111
087207
S1U-C-112
087194
S1U-C-115
087209
S1U-C-200
087195
S1U-C-203
087215
S1U-C-204
087196
S1U-C-207
------087218
S1U-C-211
087220
S1U-C-214
087197
S1U-C-215
087221
S1U-C-300
087222
S1U-C-303
------087198
S1U-C-307
087224
S1U-C-308
087225
S1U-C-311
087210
S1U-C-315
------087211
S1U-C-407
087212
S1U-C-415
SPECIFICATIONS
PAGE B11-5
B-1 UNIT
USED IN CUSTOMER
MANUFACTURED HOUSINGS
B-1 Units
Part
Number
069060
---069061
---069062
069034
069063
---069064
069039
------069065
---069045
069046
069066
------069067
069069
-------
PAGE B11-6
B11-14
Part
Name
B1U-C-107
---B1U-C-111
---B1U-C-115
B1U-C-200
B1U-C-203
---B1U-C-207
B1U-C-208
------B1U-C-215
---B1U-C-303
B1U-C-304
B1U-C-307
------B1U-C-315
B1U-C-400
-------
SELECTION
PAGE B11-7
Weight
Lbs
(Approx)
7
11
11
11
12
18
17
17
20
35
34
34
34
55
53
53
51
115
115
115
115
138
190
Bearing Reference
Guide
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
O**
3.13
4.062
3.09
2.69
2.50
4.438
3.94
3.31
4.438
3.50
2.88
2.75
5.000
4.50
3.56
4.812
3.88
3.06
2.88
5.312
4.75
3.81
5.375
4.38
5.31
3.19
6.000
5.38
4.06
5.687
4.66
3.80
4.09
6.375
5.69
4.63
6.562
5.44
4.50
4.50
7.312
6.50
5.25
8.000
5.94
4.88
5.56
8.625
7.91
6.00
9.500
7.38
5.63
6.38
10.250
9.75
6.63
7.25
10.625
11.500
8.38
9.38
6.19
6.63
6.89
7.44
11.125
12.500
10.38
11.88
** + .000 - .002
PAGE B11-6
B11-15
UNISPHERE II
IMPERIAL
SELECTION
PAGE B11-7
UNIFIED SAF
Shaft
G
H
Size
A
B
C
D**
E
Hex
Hex
Inches
1-7/16
4.50
2.69
0.75
3.875
3.81
7/16
5/8
1-1/2
1-11/16
4.88
3.13
0.75
4.250
4.13
7/16
5/8
1-3/4
1-15/16
5.25
3.25
0.88
4.750
4.50
7/16
5/8
2
2-3/16
5.75
3.75
0.88
5.250
5.00
7/16
5/8
2-1/4
2-7/16
6.00
4.00
1.00
5.750
5.31
5/8
5/8
2-1/2
2-11/16
6.50
4.44
1.00
6.500
6.19
5/8
3/4
2-7/8
2-15/16
3
3-3/16
7.00
5.00
1.25
7.750
7.50
5/8
3/4
3-1/4
3-7/16
3-1/2
3-11/16
9.50
6.25
1.50
9.250
8.81
5/8
3/4
3-15/16
4
4-7/16
10.00
6.63
1.75
10.500
9.84
3/4
3/4
4-15/16
11.25
7.38
2.00
11.750
10.84
3/4
3/4
A One-Piece Collar Furnished Up Thru 2-7/16 Sizes. Larger Sizes Use A Two-Piece Collar
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
Type C Units - Inch
Bearing Reference
Guide
Type C Take-Up Bearing
B
E
E-Family Roller
Bearings
3/4"
Specialty Tapered
Products
1" SCREW
1-3/8" DEEP
HOLE
7/16" DIA.
PIN
S-2000

grease fitting
1/2" W 1/64"
UNISPHERE II
A
R
IMPERIAL
1-7/8"
UNIFIED SAF
P
C
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
PAGE B11-6
B11-16
SELECTION
PAGE B11-7
Bearing Reference
Guide
Type C Take-Up Bearing
1-7/16
1-1/2
1-15/16
2-3/16
2-7/16
2-15/16
Shaft
Size
Inches
1-7/16
1-1/2
1-15/16
2-3/16
2-7/16
2-15/16
036116
036054
036118
036119
036120
036121
Part
Name
Weight
Lbs
(Approx)
NSTU-C-107
NSTU-C-108
NSTU-C-115
NSTU-C-203
NSTU-C-207
NSTU-C-215
12
15
18
26
27
37
4.50
4.88
5.25
5.75
6.00
6.50
5.63
5.88
6.00
7.00
7.00
7.75
2.69
3.13
3.25
3.75
4.00
4.44
2.50
3.00
3.50
4.50
4.50
5.00
3.63
3.63
3.63
4.63
4.63
4.50
3.08
3.50
3.88
4.38
4.66
5.44
5.13
5.13
5.13
5.13
5.13
6.13
6.25
6.25
6.25
6.25
6.25
7.25
1.25
1.25
1.25
1.25
1.25
1.25
4.00
4.25
4.75
5.75
5.75
6.50
Specialty Tapered
Products
Part
Number
E-Family Roller
Bearings
Gray Iron
Shaft
Size
Inches #
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
PAGE B11-6
B11-17
SELECTION
PAGE B11-7
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
Bearing Reference
Guide
Type C Hanger Bearing
E-Family Roller
Bearings
E
Specialty Tapered
Products
S-2000

grease fitting
P PLUNGER SCREW
UNISPHERE II
A
L
IMPERIAL
C
B
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
PAGE B11-6
B11-18
SELECTION
PAGE B11-7
Bearing Reference
Guide
Type C Hanger Bearing
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
Part
Name
Weight
Lbs
(Approx)
061082
061083
061084
061085
061086
061087
HNG-C-115
HNG-C-203
HNG-C-207
HNG-C-211
HNG-C-215
HNG-C-307
16
21
30
41
40
51
8.25
8.88
9.63
6.25
6.88
7.63
2.75
3.00
3.00
4.63
5.13
5.38
3.38
3.75
4.13
2.94
3.31
3.50
3.88
4.38
4.66
5/8, 1-1/2
5/8, 1-1/2
5/8, 1-1/2
10.38
8.25
3.25
6.25
4.63
4.00
5.44
3/4, 2
11.25
9.25
4.00
6.75
5.13
4.50
5.94
3/4, 2-1/2
S-2000
Shaft
Size
Inches
Part
Number
Specialty Tapered
Products
Shaft
Size
Inches #
E-Family Roller
Bearings
Gray Iron
FEATURES/BENEFITS
PAGE B11-2
SPECIFICATIONS
PAGE B11-5
PAGE B11-6
B11-19
SELECTION
PAGE B11-7
UNIFIED SAF
IMPERIAL
UNISPHERE II
Bearing Reference
Guide
SPECIFICATION
Special Duty
E-Family Roller
Bearings
The standard housing material for Special Duty mounted

strength of 30,000 psi. The outer housings for the pillow
blocks and flange bearings are of split construction for ease
of replacement of the completely assembled, adjusted and
lubricated inner units. The housings for the D, S-1 and B-1 units
are of solid one piece construction. Pillow blocks and flange
bearings are available in both expansion and non expansion
types.
Specialty Tapered
Products
Special Duty mounted bearings have duplex tapered roller

mounted to the shaft with a tapered adaptor sleeve extending
thru the complete length of the pillow block. The tapered roller
bearings used in the Special Duty mounted bearings all have
case carburized inner races (cone), outer races (cup) and rollers.
A single adapter nut is used on sizes thru 3-1/2 with two
adaptor nuts being used on the larger sizes. The nut at the large
end of the taper can be used to remove the bearing from the
shaft.
Special Duty mounted bearings have two piston ring seals
running in grooves in the seal ring carriers at each end of the
units to seal the bearings both on and off the shaft. Sizes thru
3-1/2 use a grooved seal ring carrier at one end and grooved
adaptor at the opposite end for carrying the piston ring seals.
Larger sizes have grooved adaptor nuts to carry the piston ring
seals.
SPECIAL DUTY (Hinged Cap Type)

The standard housing material for Special Duty hinged cap
strength of 30,000 psi. The housing is equipped with a brass
hand wheel for ease of removal of the S-1 unit from the pillow
block housing. Hinged cap pillow blocks are available in both
expansion and non-expansion types.
Hinged cap pillow blocks and units are mounted to the shaft
with a tapered adapter sleeve extending completely thru the
unit. The tapered adapter sleeve is equipped with micro mount
removal screws for ease of demounting the bearing from the
shaft.
The hinged cap pillow blocks are arranged for relubrication
from the end of the pillow block rather than from the top of the
pillow block. Besides the features specified above the hinged
cap pillow blocks have many other features in common with the
special duty mounted bearings.
TRACTION WHEEL
The traction wheel is to be equipped with a ductile iron (ASTM
536 grade 65-45-10) hub, having indirect mounted tapered roller
bearings mounted to ASTI 1018 shafting secured in a support
and having drops of 7-3/16, 8 and 10. Combination labyrinth
and dynaface seals shall be used.
S-2000
SPECIAL DUTY AVAILABLE IN
UNISPHERE II
Pillow Blocks,
2-Bolt Base
1-3/8 To 3-1/2
Pillow Blocks,
4-Bolt Base
2-1/4 To 12
Flange
Bearings
4-Bolt
1-3/16 To 6
All In Either Expansion Or Non-Expansion D, S1 & B1 Units 1-3/8

To 12
IMPERIAL
Hinged Cap Pillow Blocks Available In Pillow Blocks,

2-Bolt Base
1-3/8 To 2-15/16
All In Either Expansion Or Non-Expansion
Hinged Cap S-1 Units
UNIFIED SAF
1-3/8 To 2-15/16
FEATURES/BENEFITS
PAGE B11-3
Traction Wheel
HOW TO ORDER
B11-21
SELECTION
B11-23
B11-20
PAGE B11-30

specified by description or part name. This method is used when
ordering units that include modifications or options. To order by
description, use the nomenclature key shown on the next page
and add any special instructions to the end of the description for
options not covered by the nomenclature.
SPECIAL BEARING REQUIREMENTS AND

LUBRICANTS
Example:
066231 except with Mobilith SHC 460 grease and
.012-.015 Lateral End Play

or
P4B-SD-215 except with Mobilith SHC 460 grease and

.012-.015 Lateral End Play
OTHER SPECIAL REQUIREMENTS NOT LISTED

encourage you to contact out Customer Order Engineering
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
SELECTION
B11-23
B11-21
PAGE B11-30
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
DODGE Bearings are factory adjusted and pre-lubricated with

lithium based NLGI Grade 2 grease. For applications where
extreme ambient temperatures, high speeds or high loads are
expected, a variety of specialty lubricants and adjustments

are available. Special lubricant options usually involve setup charges and premiums. To order, specify type of lubricant
required at the end of the product name or after the standard
part number.
Bearing Reference
Guide

order processing.
E-Family Roller
Bearings
Special Duty
Specialty Tapered
Products
HOW TO ORDER
Bearing Reference
Guide
NOMENCLATURE
P2B - SD - 207 - E
E-Family Roller
Bearings
HOUSING STYLE
STYLE
P2B = PILLOW BLOCK
2 BOLT, CAST IRON
BEARING TYPE
C = TYPE C
INCHES & 16TH

2 = 2 INCHES
07 = 7/16 INCHES
OR
207 = 2-7/16
SD = SPECIAL DUTY
Specialty Tapered
Products
P4B = PILLOW BLOCK

4 BOLT, CAST IRON
SP4B = PILLOW BLOCK
4 BOLT, CAST STEEL
SIZE
HC = HINGED CAP
OTHER DATA
E = EXPANSION
TYPE BEARING
IF E DOES NOT APPEAR
AFTER SEAL TYPE, THEN
BEARING IS NON-EXPANSION
TYPE
AS = ALL STEEL
4 BOLT, CAST IRON
S-2000


UNISPHERE II

BEARING, CAST IRON
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
SELECTION
B11-23
B11-22
PAGE B11-30
allowable load, especially at a low speed, is very large, the shaft

should be checked to assure adequate shaft strength.
DODGE Special Duty Double Row Tapered Roller Bearings have

the highest capacity of all DODGE Tapered Roller Bearings.
They carry heavy radial loads and combined radial and thrust
loads. The maximum recommended load which can be applied
is limited by various components in the system such as bearing,
housing, shaft, shaft attachment, speed and life requirements
as listed in this catalog. DODGE Special Duty Tapered Roller
Bearings have been applied successfully even when these limits
have been exceeded under controlled operating conditions.
Contact DODGE Application Engineering (864) 284-5700 for
applications which exceed the recommendations of this catalog.
through the base. Where uplift loads are involved, see Table
9, pg. B11-29 for maximum values. Where a load pulls the
housing away from the mounting base, both the hold-down
Shaft Size
Up To 1-1/2
1-9/16 To 2-1/2
2-1/2 To 4
4-3/16 To 6
6-7/16 To 8
L10 Hours Life* --- The life which may be expected from at least
conditions.
10/3
( ) (
C90
L10 =
1,500,000
RPM
Tolerance, Inches
+.000-.002
+.000 -.003
+.000-.004
+.000-.005
+.000-.006
L10 Life Adjustment - The calculated L10 Life obtained from this
procedure is subject to life adjustment factors in accordance
with ABMA standards described on page B16-9. Consult
Application Engineering for assistance.
Where:
Bearing Reference
Guide
SPECIAL DUTY-DOUBLE ROW TAPERED ROLLER

BEARINGS
E-Family Roller
Bearings
Special Duty
Specialty Tapered
Products
SELECTION

ONLY
GENERAL
Heavy Service --- For heavy shock loads, frequent shock loads,
or severe vibrations, add up to 50% (according to severity of
conditions) to the Equivalent Radial Load. Consult DODGE
Application Engineering for additional selection assistance.
2. Establish bearing radial load, FR (FR = P for Pure Radial Load

Conditions). The DODGE program BEST can be used to find
application loads.

as a guide for general applications that will give adequate L10 life
for pillow blocks. The maximum thrust load should not exceed
values shown on Table 6. Where substantial radial load is also
present, it is advisable to calculate actual L10 life to assure
that it meets the requirements. The effectiveness of the shaft
attachment to carry thrust load depends on proper tightening,
shaft tolerance (see table below) and shaft deflections.
Therefore, it is advisable to use auxiliary thrust carrying devices
such as shaft shoulder, snap ring or a thrust collar to locate the
bearing under thrust loads heavier than shown below, or where
extreme reliability is desired.
Using the easy selection Table 5, pg. B11-26 find, under the
RPM column, the equivalent radial load that equals or is higher
for your application. If the desired life is different than the values
RPM RANGE
20200
2012000
Over
2000
Recommended Thrust Load
C90/4
C90/8
C90/12

normal radial and radial/thrust load applications. Since the
FEATURES/BENEFITS
PAGE B11-3
UNISPHERE II
3. Establish RPM.
Example:

1. L10 Life = 30,000 Hours
3. RPM = 1,000

hours L10 life row, the equivalent radial load of 4362 lbs.
Exceeds the 3800 lbs. Radial load for shaft sizes 2-1/8 to
2-1/4. A bearing with bore ranging from 2-1/8 to 2-1/4 may
be used for this application.
SPECIFICATION
B11-20
SELECTION
B11-23
B11-23
PAGE B11-30
IMPERIAL
UNIFIED SAF
S-2000
C90 = Dynamic Capacity (Table 4, pg. B11-25), lbs
Bearing Reference
Guide
SELECTION
Special Duty
E-Family Roller
Bearings
depending on whether FA/FR is equal to or less than e, or FA/FR

is greater than e. Substitute all known values into the equivalent
radial load equation. P (equivalent radial load) can be used in
the life formula to determine L10, or it can be compared to the
life desired in the easy selection Table 5, pg. B11-26 & B11-27.
ALTERNATE METHOD A - SELECTING A BEARING

FOR AN L10 LIFE VALUE NOT SHOWN IN THE EASY
SELECTION CHART.
dynamic capacity C is identified in terms of L10, RPM and P.
C90 =
L10 x RPM
1,500,000
0.3

LOADS
X P
Specialty Tapered
Products
Since the L10, RPM, and P are known, solve for C90. Select
from the dynamic capacity column on Table 4, pg. B11-25 the
C90 value equal to or greater than the C90 value just calculated.
The bore size on the far left represents the bore size selection.
Check that the application RPM does not exceed the MAX. RPM
on Table 4. When selecting an L10 life of less than 30,000 hours,
particular attention must be paid to shaft deflection and proper
lubricant selection.

S-2000

load and radial loads to an equivalent radial load having the
magnitude.
UNISPHERE II

Where:

P = Equivalent radial load, lbs.

FR = Radial load, lbs.

FA = Thrust (axial) load, lbs.



Y = Thrust load factor (Table 4)
selected bore size. Determine X and Y from Table 4, pg. B11-25
Tapered Roller Bearings perform extremely well under pure

thrust load applications. Use P = YFA for the equivalent radial
load. The value of Y is obtained from Table 4, pg. B11-25 for
FA/FR>e. Substitute Y and FA into the equivalent load equation.
determine L10 or it can be compared to the allowable equivalent
radial load ratings for the speed and hours life desired in the
easy selection Table 5, pg. B11-26 & B11-27.
LUBRICATION
DODGE Special Duty Tapered Roller Bearings are lubricated
at the factory with Mobilgrease XHP222. This grease will
adequately handle low and medium speeds with low and
medium loads at normal temperatures as defined on Table
8, pg. B11-29 For very low and high speeds, for heavy loads
and for low and high temperatures, special greases must be
used. Contact DODGE Application Engineering (864) 284-5700.
DODGE engineers will recommend bearings and lubricants for
the above unusual conditions. DODGE also has the expertise
to custom design and build special bearings for your needs.
The only maintenance requirement for DODGE Tapered Roller
Bearings is periodic relubrication at regular intervals as outlined
in the appropriate instruction manuals.

induce heavy loads. In the case of two bearings, alignment is
not as critical, especially with DODGE Special Duty Tapered
Roller Bearings. Special Duty bearings are designed to allow as
IMPERIAL
UNIFIED SAF
The DODGE Bearing Evaluation and Selection Technique (BEST) is a menu driven computer program that calculates bearing loads, fatigue life
and operating temperature for a two bearing shaft system based on user supplied input parameters. This interactive program is available at www.
ptwizard.com under the Product Selection area.
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
SELECTION
B11-23
B11-24
PAGE B11-30
Special Duty
E-Family Roller
Bearings
bolt should be alternately tightened in incremental torque values

Table 4: Special Duty Roller Bearings Radial/Thrust Factors

e
1-3/8 to 1-11/2
1-9/16 to 1-3/4
1-7/8 to 2
2-1/8 to 2-1/4
2-3/8 to 2-1/2
2-5/8 to 3
3-3/16 to 3-1/2
3-11/16 to 4
4-7/16 to 4-1/2
4-15/16 to 5
5-7/16 to 6
6-1/2 to 7
7-15/16 to 8
8-1/2 to 10
11 to 12
0.31
0.43
0.46
0.49
0.51
0.27
0.43
0.43
0.49
0.46
0.48
0.54
0.34
0.45
0.34
FA/FR e
X
1
1
1
1
1
1
1
1
1
1
0.87
0.87
0.87
0.87
0.87
FA/FR e
Y
0
0
0
0
0
0
0
0
0
0
1.80
1.61
2.55
1.90
2.53
X
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.70
0.70
0.70
0.70
0.70
Y
1.97
1.39
1.31
1.23
1.18
2.23
1.39
1.41
1.23
1.31
2.18
1.95
3.08
2.30
3.06
Dynamic Capacity C90 (TS)

LBS.
NEWTONS
7,717
34,337
8,177
36,373
8,266
36,769
10,716
47,681
11,010
48,990
21,331
94,912
23,553
104,800
35,145
156,380
35,145
156,380
43,550
214,339
62,000
275,873
68,700
305,685
79,200
352,406
76,500
340,392
124,000
551,746
Maximum RPM
3250
2900
2700
2300
2180
1830
1510
1330
1120
1040
860
760
700
550
490
Specialty Tapered
Products
Bore Size
S-2000
much as 2 to 5 of static misalignment up to 8 bore size. 1 to

1.5 for bore sizes greater than 8. To ensure good alignment,
mounting surfaces must be checked for flatness and must lie in
the same plane. When tightening base bolts and cap bolts, each
Bearing Reference
Guide
SELECTION
COMPARING SPHERICAL TO TAPER ROLLER BEARING

The dynamic capacity C (spherical) and C90 (taper) are not to the same base.
UNISPHERE II
To compare basic dynamic capacities, multiply C x .259 and compare to C90.

FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
SELECTION
B11-23
B11-25
PAGE B11-30
UNIFIED SAF
IMPERIAL
Bearing Reference
Guide
SELECTION
Table 5: Dodge Special Duty Tapered Roller Bearings
Bore
Size
E-Family Roller
Bearings
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
Specialty Tapered
Products
1-7/8
1-15/16
2
2-1/8
2-3/16
2-1/4
S-2000
2-3/8
2-7/16
2-1/2
2-5/8
2-11/16
2-3/4
2-15/16
3
UNISPHERE II
3-3/16
3-3/8
3-7/16
3-1/2
3-11/16
3-3/4
3-7/8
3-15/16
4
IMPERIAL
4-7/16
4-1/2
4-15/16
5
Hours
Life
UNIFIED SAF
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
50
13210
10730
7717
6621
5378
13997
11369
8177
7015
5698
14149
11493
8266
7092
5760
18343
14899
10716
9193
7467
18847
15308
11010
9446
7672
36514
29658
21331
18300
14864
40317
32748
23553
20207
16413
60160
48865
35145
30152
24491
60160
48865
35145
30152
24491
74548
60551
43550
37362
30348
FEATURES/BENEFITS
PAGE B11-3
100
10730
8715
6268
5378
4368
11369
9235
6642
5698
4628
11493
9335
6714
5760
4679
14899
12102
8704
7467
6065
15308
12434
8943
7672
6232
29658
24090
17326
14864
12074
32748
26600
19131
16413
13331
48865
39691
28547
24491
19893
48865
39691
28547
24491
19893
60551
49183
35374
30348
24650
Allowable Equivalent Radial Load Rating (Lbs.) At Various Revolutions Per Minute
250
500
750
1000
1250
1500
1750
2000
2500
8151
6621
5862
5378
5029
4762
4546
4368
4085
6621
5378
4762
4368
4085
3868
3693
3548
3318
4762
3868
3425
3142
2938
2782
2656
2552
2386
4085
3318
2938
2695
2521
2386
2279
2189
2047
3318
2695
2386
2189
2047
1938
1851
1778
1663
8637
7015
6212
5698
5329
5045
4817
4628
4329
7015
5698
5045
4628
4329
4098
3913
3759
3516
5045
4098
3629
3329
3113
2948
2814
2704
2529
4329
3516
3113
2856
2671
2529
2414
2320
2169
3516
2856
2529
2320
2169
2054
1961
1884
1762
8731
7092
6279
5760
5387
5100
4870
4679
4376
7092
5760
5100
4679
4376
4143
3956
3800
3554
5100
4143
3668
3365
3147
2980
2845
2733
2556
4376
3554
3147
2887
2700
2556
2441
2345
2193
3554
2887
2556
2345
2193
2076
1982
1905
1781
11318
9193
8140
7467
6984
6612
6313
6065
9193
7467
6612
6065
5673
5371
5128
4927
6612
5371
4756
4362
4080
3863
3688
3543
5673
4608
4080
3743
3500
3314
3164
3040
4608
3743
3314
3040
2843
2692
2570
2469
11629
9446
8364
7672
7175
6794
6487
6232
9446
7672
6794
6232
5828
5518
5269
5062
6794
5518
4886
4482
4192
3969
3789
3641
5828
4734
4192
3845
3596
3405
3251
3123
4734
3845
3405
3123
2921
2766
2641
2537
22530
18300
16204
14864
13902
13162
12567
18300
14864
13162
12074
11292
10691
10208
13162
10691
9466
8684
8121
7689
7342
11292
9172
8121
7450
6967
6597
6298
9172
7450
6597
6051
5659
5358
5116
24877
20207
17892
16413
15350
14533
20207
16413
14533
13331
12468
11804
14533
11804
10452
9588
8967
8490
12468
10127
8967
8226
7693
7284
10127
8226
7284
6681
6249
5916
37121
30152
26698
24491
22905
30152
24491
21686
19893
18604
21686
17614
15597
14307
13381
18604
15112
13381
12274
11480
15112
12274
10869
9970
9324
37121
30152
26698
24491
30152
24491
21686
19893
21686
17614
15597
14307
18604
15112
13381
12274
15112
12274
10869
9970
45998
37362
33083
30348
37362
30348
26872
24650
26872
21827
19327
17729
23054
18726
16581
15210
18726
15210
13468
12354
SPECIFICATION
B11-20
SELECTION
B11-23
B11-26
3000
3868
3142
2259
1938
1574
4098
3329
2394
2054
1668
PAGE B11-30
3500
3693
3000
2157
1851
1503
7-15/16
8
8-1/2
9
9-1/2
10
11
12
50,000
106380
86410
65640
53315
100,000
86410
70185
53315
43305
3000
3500
Bearing Reference
Guide
250
500
750
1000
1250
1500
1750
2000
2500
65485
53190
47100
53190
43205
38255
38255
31075
27515
32820
26660
23605
26660
21655
19175
72560
58940
52190
58940
47575
42390
42390
34430
30490
36365
29540
26155
29540
23995
21245
83650
67945
60165
67945
55190
48870
48870
39695
35145
41925
34055
30155
34055
27660
24490
80800
65630
65630
53310
47250
38340
40495
32895
32895
26715
130970
106380
106380
86410
76510
62145
E-Family Roller
Bearings
100
86205
70020
50360
43205
35090
95520
77585
55800
47875
38885
110120
89445
64330
55190
44830
106365
86395
62135
53310
43300
172410
140040
100720
UNISPHERE II
6-1/2
6-15/16
7
50
106130
86205
62000
53190
43205
117600
95520
68700
58940
47875
135570
110120
79200
67945
55190
130950
106365
76500
65630
53310
212260
172410
124000
IMPERIAL
5-7/16
5-15/16
6
Hours
Life
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
SELECTION
B11-23
B11-27
PAGE B11-30
UNIFIED SAF
Bore
Size
Specialty Tapered
Products
Table 5: Dodge Special Duty Tapered Roller Bearings
S-2000
SELECTION
Bearing Reference
Guide
SELECTION
Special Duty
Table 6: Special Duty Pillow Blocks Housing Permissible Thrust Load, Lbs. *
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
Shaft
Shaft
2-Bolt
4-Bolt
Size, Inches
Size, Inches
1-3/8
3-11/16
1-7/16
1521
--3-3/4
1-1/2
3-7/8
1-9/16
3-15/16
1-5/8
4
1772
--1-11/16
4-7/16
1-3/4
4-1/2
1-7/8
4-15/16
1-15/16
1964
--5
2
5-7/16
2-1/8
5-15/16
2-3/16
2325
--6
2-1/4
6-1/2
2-3/8
6-15/16
2-7/16
3122
3122
7
2-1/2
7-15/16
2-5/8
8
2-11/16
8-1/2
2-3/4
9
2-13/16
4375
4375
9-1/2
2-7/8
10
2-15/16
11
3
12
3-3/16
3-1/4
3-3/8
6118
6118
3-7/16
3-1/2
* The limits above apply to pillow blocks. For thrust loads larger than listed or heavy thrust loading on other style housing, contact
DODGE Engineering for recommendation.
2-Bolt
4-Bolt
---
8250
---
10538
---
12190
---
17957
---
24115
---
27260
---
38138
---
50655
Table 7: Special Duty Maximum Total Axial Expansion

Shaft Size - Inches
IMPERIAL
1-3/8 - 1-1/2
1-9/16 - 1-3/4
1-7/8 - 2
2-1/8 - 2-1/4
2-3/8 - 2-1/2
2-5/8 - 3
3-3/16 - 3-1/2
3-11/16 - 4
4-7/16 - 4-1/2
4-15/16 - 5
5-7/16 - 6
6-1/2 - 7
7-15/16 - 8
8-1/2 - 10
11 - 12
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-3
Special Duty
4-Blt. P.B.
5/8
5/8
3/4
3/4
3/4
3/4
3/4
1-1/2
1-1/2
1-1/2
1-1/2
2-Blt. P.B.
3/16
5/8
5/8
5/8
5/8
3/4
3/4
-
SPECIFICATION
B11-20
SELECTION
B11-23
B11-28
Flg.
3/16
1/4
1/4
1/4
1/4
5/8
3/4
1/4
5/8
5/8
5/8
-
PAGE B11-30
Bearing Reference
Guide
SELECTION
Special Duty
Table 8: Definition of Operating Conditions For Tapered Roller Bearings
E-Family Roller
Bearings

OVER 70% OF C90
-100F TO 20F
OVER 20F TO 200F
OVER 200F TO 300F
OVER 300F TO 400F
Specialty Tapered
Products
LOW SPEED
MEDIUM SPEED
HIGH SPEED
LIGHT LOAD
NORMAL LOAD
HEAVY LOAD
LOW TEMPERATURE
MEDIUM TEMPERATURE
HIGH TEMPERATURE
UNISPHERE II
S-2000
P180
Table 9: Pillow Block Housing Ratings, Special Duty
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
SELECTION
B11-23
B11-29
IMPERIAL
Housing Strength Lbs.

Gray Iron
180
3,470
4,430
5,250
7,300
7,200
10,600
13,000
21,600
25,800
22,900
41,500
82,000
104,000
PAGE B11-30
UNIFIED SAF
Shaft
Size
(Inches)
1-3/8 - 1-1/2
1-9/16 - 1-3/4
1-7/8 - 2
2-1/8 - 2-1/4
2-3/8 - 2-1/2
2-5/8 - 3
3-3/16 - 3-1/2
3-11/6 - 4
4-7/16 - 4-1/2
4-15/16 - 5
5-7/16 - 6
6-1/2 - 7
7-15/16 - 8
Bearing Reference
Guide
Special Duty Pillow Block - Inch
2-BOLT BASE
E-Family Roller
Bearings
G
L
A
J
F BOLT DIA.
M
Specialty Tapered
Products
D MIN
S-2000
UNISPHERE II
IMPERIAL

Shaft
Part
Part
Size
Number
Name
Inches #
1-3/8
066213
P2B-SD-106
1-7/16
066214
P2B-SD-107
1-1/2
066300
P2B-SD-108
1-9/16
066212
P2B-SD-109
1-5/8
066228
P2B-SD-110
1-11/16
066216
P2B-SD-111
1-3/4
066301
P2B-SD-112
1-7/8
066217
P2B-SD-114
1-15/16
066218
P2B-SD-115
2
066302
P2B-SD-200
2-1/8
066215
P2B-SD-202
2-3/16
066220
P2B-SD-203
2-1/4
066303
P2B-SD-204
2-7/16
066222
P2B-SD-207
2-1/2
066246
P2B-SD-208
2-5/8
066223
P2B-SD-210
2-11/16
066304
P2B-SD-211
2-3/4
066226
P2B-SD-212
2-15/16
066230
P2B-SD-215
3
066305
P2B-SD-300
3-3/16
066232
P2B-SD-303
3-3/8
066237
P2B-SD-306
3-7/16
066234
P2B-SD-307
3-1/2
066236
P2B-SD-308
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-3
C
D MAX
Weight
Lbs
(Approx)
20
20
20
27
27
27
27
33
32
32
48
47
47
56
56
84
84
84
82
82
120
119
118
118
Gray Iron Expansion

Shaft
Part
Part
Size
Number
Name
Inches #
1-3/8
066249
P2B-SD-106E
1-7/16
066250
P2B-SD-107E
1-1/2
066306
P2B-SD-108E
1-9/16
066248
P2B-SD-109E
1-5/8
066243
P2B-SD-110E
1-11/16
066252
P2B-SD-111E
1-3/4
066307
P2B-SD-112E
1-7/8
066253
P2B-SD-114E
1-15/16
066254
P2B-SD-115E
2
066308
P2B-SD-200E
2-1/8
066257
P2B-SD-202EE
2-3/16
066256
P2B-SD-203E
2-1/4
066309
P2B-SD-204
2-7/16
066258
P2B-SD-207E
2-1/2
066247
P2B-SD-208E
2-5/8
066262
P2B-SD-210E
2-11/16
066310
P2B-SD-211E
2-3/4
066263
P2B-SD-212E
2-15/16
066266
P2B-SD-215E
3
066311
P2B-SD-300E
3-3/16
066269
P2B-SD-303E
3-3/8
066271
P2B-SD-306E
3-7/16
066270
P2B-SD-307E
3-1/2
066273
P2B-SD-308E
4-Bolt Caps
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-30
SELECTION
PAGE B11-23
Weight
Lbs
(Approx)
22
22
22
28
28
28
28
33
32
32
50
49
49
60
60
80
80
80
78
78
120
119
118
118
Bearing Reference
Guide
FEATURES/BENEFITS
PAGE B11-3
6.88
7.63
1/2
1.00
2.13
6.25
2.44
2.88
5.88
1.81
2.19
3/16
7.56
7.94
1/2
1.00
2.38
6.81
2.81
3.13
5.94
1.88
2.25
5/8
8.25
9.25
5/8
1.25
2.50
7.13
3.06
3.25
7.25
1.94
2.31
5/8
9.13
10.38
5/8
1.25
2.88
8.00
3.44
3.75
7.25
2.06
2.50
5/8
10.00
11.50
3/4
1.50
3.00
8.56
3.81
4.00
7.81
2.31
2.75
5/8
11.00
12.50
3/4
1.50
3.75
9.88
4.44
4.75
8.69
2.63
3.13
3/4
13.25
14.25
7/8
1.50
4.00
11.38
5.06
5.50
11.25
2.94
3.44
3/4
Exp*
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-31
SELECTION
PAGE B11-23
UNISPHERE II
Max.
IMPERIAL
Min.
F
Bolt
Dia.
UNIFIED SAF
Shaft
Size
A
B
C
Inches
1-3/8
1-7/16
4.00
9.00
3.00
1-1/2
1-9/16
1-5/8
4.13
9.50
3.44
1-11/16
1-3/4
1-7/8
1-15/16
4.25
11.00
3.50
2
2-1/8
2-3/16
4.56
12.00
4.00
2-1/4
2-7/16
5.06
13.25
4.25
2-1/2
2-5/8
2-11/16
2-3/4
5.75
14.25
4.75
2-15/16
3
3-3/16
3-3/8
6.38
16.75
5.50
3-7/16
3-1/2
* Total Expansion For Expansion Bearing Only
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
2-BOLT BASE
Bearing Reference
Guide
4-BOLT BASE
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
NON-EXP
NON-EXP
NON-EXP
UNISPHERE II
EXP
EXP
2-3/8" THRU 3-1/2"

CONSTRUCTION
3-11/16" THRU 6"

CONSTRUCTION
IMPERIAL
EXP
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-32
SELECTION
PAGE B11-23
Bearing Reference
Guide
Gray Iron Expansion
Shaft
Part
Part
Size
Number
Name
Inches #
2-3/8
066400
P4B-SD-206E
2-7/16
066260
P4B-SD-207E
2-1/2
066245
P4B-SD-208E
2-11/16
066261
P4B-SD-211E
2-3/4
066403
P4B-SD-212E
2-7/8
066405
P4B-SD-214E
2-15/16
066268
P4B-SD-215E
3
066406
P4B-SD-300E
3-3/16
066407
P4B-SD-303E
3-3/8
066410
P4B-SD-306E
3-7/16
066272
P4B-SD-307E
3-1/2
066411
P4B-SD-308E
3-11/16
066412
P4B-SD-311E
3-3/4
066413
P4B-SD-312E
3-7/8
066414
P4B-SD-314E
3-15/16
066274
P4B-SD-315E
4
066415
P4B-SD-400E
4-7/16
066276
P4B-SD-407E
4-1/2
066417
P4B-SD-408E
4-15/16
066278
P4B-SD-415E
5
066418
P4B-SD-500E
5-7/16
066419
P4B-SD-507E
5-15/16
066421
P4B-SD-51SE
6
066422
P4B-SD-600E
6-1/2
066424
P4B-SD-608E
6-15/16
066425
P4B-SD-615E
7
066426
P4B-SD-700E
7-15/16
066428
P4B-SD-715E
8
066429
P4B-SD-800E
Weight
Lbs
(Approx)
60
60
60
82
82
81
80
80
124
122
120
120
230
230
230
230
230
296
296
380
380
585
585
585
1050
1050
1050
1550
1550
E-Family Roller
Bearings
Weight
Lbs
(Approx)
60
60
60
82
82
81
80
80
124
122
120
120
215
215
215
215
215
296
296
380
380
585
585
585
1050
1050
1050
1550
1550
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-33
SELECTION
PAGE B11-23
UNIFIED SAF
IMPERIAL
Gray Iron Non-Expansion *

Shaft
Part
Part
Size
Number
Name
Inches #
2-3/8
066360
P4B-SD-206
2-7/16
066224
P4B-SD-207
2-1/2
066244
P4B-SD-208
2-11/16
066225
P4B-SD-211
2-3/4
066363
P4B-SD-212
2-7/8
066365
P4B-SD-214
2-15/16
066231
P4B-SD-215
3
066366
P4B-SD-300
3-3/16
066367
P4B-SD-303
3-3/8
066370
P4B-SD-306
3-7/16
066235
P4B-SD-307
3-1/2
066371
P4B-SD-308
3-11/16
066372
P4B-SD-311
3-3/4
066373
P4B-SD-312
3-7/8
066374
P4B-SD-314
3-15/16
066238
P4B-SD-315
4
066375
P4B-SD-400
4-7/16
066240
P4B-SD-407
4-1/2
066377
P4B-SD-408
4-15/16
066242
P4B-SD-415
5
066378
P4B-SD-500
5-7/16
066379
P4B-SD-507
5-15/16
066381
P4B-SD-515
6
066382
P4B-SD-600
6-1/2
066384
P4B-SD-608
6-15/16
066385
P4B-SD-615
7
066386
P4B-SD-700
7-15/16
066388
P4B-SD-715
8
066389
P4B-SD-800
Note: When ordering sizes larger than 5, specify RPM
Note: All sizes use a 1/8 - 27 NPT hydraulic grease fitting
Specialty Tapered
Products
4-BOLT BASE
S-2000
UNISPHERE II
Bearing Reference
Guide
4-BOLT BASE
G
E-Family Roller
Bearings
E
J
F BOLT DIA.
Specialty Tapered
Products
M
H
D MIN
D MAX
B
S-2000
NON-EXP
NON-EXP
UNISPHERE II
NON-EXP
S
R
EXP
EXP
2-3/8" THRU 3-1/2"

CONSTRUCTION
3-11/16" THRU 6"

CONSTRUCTION
IMPERIAL
EXP
C

UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-34
SELECTION
PAGE B11-23
Bearing Reference
Guide
Min.
E
Max.
F
Bolt
Dia.
G*
2-3/8
2-7/16
5.06
13.25
4.25
9.88
11.63
2.50
5/8
1.50
2-1/2
2-11/16
2-3/4
2-7/8
5.75
14.25
4.75
10.88
12.63
2.75
5/8
1.50
2-15/16
3
3-3/16
3-3/8
6.38
16.75
5.50
13.00
14.50
3.25
3/4
1.50
3-7/16
3-1/2
3-11/16
3-3/4
3-7/8
8.50
19.00
7.00
15.00
16.00
3.25
7/8
1.50
3-15/16
4
4-7/16
9.50
20.00
7.50
15.50
17.50
3.50
7/8
1.88
4-1/2
4-15/16
10.50
23.00
8.25
17.75
19.75
3.75
1
2.13
5
5-7/16
5-15/16 12.00
26.75
9.25
21.38
23.63
5.00
1-1/8
2.25
6
6-1/2
6-15/16 13.50
34.38
10.25
27.50
30.50
5.50
1-1/2
3.00
7
7-15/16
14.50
38.75
11.25
30.50
34.00
6.00
1-3/4
3.50
8
* These Are As Cast Surfaces. Dimensions May Fluctuate Due To Draft Angles And Pattern Shifts
** Exp-Total Expansion Divided Equally On Both Sides Of Bearing (Expansion Bearing Only)
Note: All sizes use a 1/8 - 27 NPT hydraulic grease fitting
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
H*
P*
Exp**
3.00
8.56
3.81
4.00
7.81
2.31
2.75
5/8
3.75
9.88
4.44
4.75
8.69
2.63
3.13
5/8
4.00
11.38
5.06
5.50
10.25
2.94
3.44
3/4
4.00
13.38
6.25
6.38
13.75
4.25
4.25
3/4
4.00
14.50
7.25
7.25
12.63
4.75
4.75
3/4
4.25
15.68
8.00
7.50
16.50
5.25
5.25
3/4
5.00
19.00
9.50
9.00
17.38
6.00
6.00
3/4
6.00
23.00
11.00
11.25
22.75
6.75
6.75
1-1/2
7.00
26.00
12.50
12.50
25.13
7.25
7.25
1-1/2
HOW TO ORDER
B11-21
B11-35
SELECTION
PAGE B11-23
S-2000
C*
UNISPHERE II
B*
IMPERIAL
UNIFIED SAF
Shaft
Size
Inches
Specialty Tapered
Products
E-Family Roller
Bearings
4-BOLT BASE
Bearing Reference
Guide
Special Duty Flange Bearing - Inch
C
F BOLT DIA.
H
E
H
E
E-Family Roller
Bearings
NON-EXP
NON-EXP
B
Specialty Tapered
Products
EXP
EXP
J
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF

Shaft
Part
Part
Size
Number
Name
Inches #
1-3/8
104160
F4B-SD-106
1-7/16
104020
F4B-SD-107
1-1/2
104161
F4B-SD-108
1-11/16
104021
F4B-SD-111
1-3/4
104162
F4B-SD-112
1-15/16
104022
F4B-SD-115
2
104164
F4B-SD-200
2-3/16
104023
F4B-SD-203
2-3/8
104169
F4B-SD-206
2-7/16
104024
F4B-SD-207
2-1/2
104170
F4B-SD-208
2-11/16
104172
F4B-SD-211
2-3/4
104173
F4B-SD-212
2-15/16
104025
F4B-SD-215
3
104176
F4B-SD-300
3-3/16
104177
F4B-SD-303
3-7/16
104026
F4B-SD-307
3-1/2
104181
F4B-SD-308
3-15/16
104027
F4B-SD-315
4
104010
F4B-SD-400
4-7/16
104028
F4B-SD-407
4-15/16
104029
F4B-SD-415
5
104013
F4B-SD-500
5-15/16
104016
F4B-SD-515
6
104018
F4B-SD-600
Note: when ordering sizes larger than 5, specify RPM
FEATURES/BENEFITS
PAGE B11-3
Gray Iron Expansion

Weight
Lbs
(Approx)
21
21
21
30
30
37
37
46
62
62
62
85
83
81
81
141
139
138
230
229
325
430
428
560
560
Shaft
Size
Inches #
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-3/8
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4
4-7/16
4-15/16
5
5-15/16
6
SPECIFICATION
B11-20
Part
Number
Part
Name
104195
104030
104196
104031
104197
104032
104199
104033
104204
104034
104205
104207
104208
104035
104211
104212
104036
104216
104037
104003
104038
104039
104006
104017
104019
F4B-SD-106E
F4B-SD-107E
F4B-SD-108E
F4B-SD-115E
F4B-SD-112E
F4B-SD-115E
F4B-SD-200E
F4B-SD-203E
F4B-SD-206E
F4B-SD-207E
F4B-SD-208E
F4B-SD-211E
F4B-SD-212E
F4B-SD-215E
F4B-SD-300E
F4B-SD-303E
F4B-SD-307E
F4B-SD-308E
F4B-SD-315E
F4B-SD-400E
F4B-SD-407E
F4B-SD-415E
F4B-SD-500E
F4B-SD-515E
F4B-SD-600E
HOW TO ORDER
B11-21
B11-36
SELECTION
PAGE B11-23
Weight
Lbs
(Approx)
22
22
22
30
30
37
37
49
64
64
64
88
86
85
84
145
144
143
234
234
325
430
428
560
560
Bearing Reference
Guide
FEATURES/BENEFITS
PAGE B11-3
F
Bolt
Dia.
Exp*
3.00
7.00
0.31
1/2
0.63
4.95
2.44
3/16
3.38
7.63
0.19
1/2
0.69
5.39
2.81
1/4
3.50
8.38
0.19
5/8
0.75
5.92
3.06
1/4
4.00
9.13
0.06
5/8
0.81
6.45
3.44
1/4
4.25
10.25
0.19
3/4
0.88
7.25
3.81
1/4
4.63
11.25
0.31
3/4
1.00
7.96
4.44
5/8
5.38
12.50
0.25
7/8
1.13
8.84
5.06
1/4
6.75
15.75
0.88
1.25
11.14
6.25
1/4
7.25
17.00
1.13
1-1/8
1.38
12.02
7.25
5/8
8.25
19.00
1.00
1-1/8
1.75
13.44
8.00
5/8
9.00
22.50
1.50
1-1/4
1.75
15.91
9.50
5/8
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-37
SELECTION
PAGE B11-23
UNISPHERE II
IMPERIAL
UNIFIED SAF
Shaft
Size
A
B
Inches
1-3/8
1-7/16
4.00
8.25
1-1/2
1-11/16
4.13
9.00
1-3/4
1-15/16
4.25
10.00
2
2-3/16
4.50
10.75
2-3/8
2-7/16
5.06
12.00
2-1/2
2-11/16
2-3/4
5.75
13.00
2-15/16
3
3-3/16
3-7/16
6.38
14.50
3-1/2
3-15/16
8.50
18.00
4
4-7/16
9.50
19.50
4-15/16
10.50
21.50
5
5-15/16
12.00
25.50
6
* Exp-Total Expansion For Expansion Bearing Only
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
Special Duty Flange Bearing - Inch
Bearing Reference
Guide
Special Duty Units - Inch
E-Family Roller
Bearings
Specialty Tapered
Products
D UNIT
S-1 UNIT
NON-EXPANSION
EXPANSION
3-11/16" THRU 12" NOT SHOWN

CONSUIT DODGE FOR DETAIL
1-3/8" THRU 3-1/2" AND 6" THRU 12" NOT SHOWN

S-2000
UNISPHERE II
B-1 UNIT
S-1 UNIT
CUSTOMER SUPPLIED HOUSING ONLY
EXPANSION
1-3/8" THRU 3-1/2" AND 6-1/2" THRU 12" NOT SHOWN

1-3/8" THRU 6" AND 8-1/2" THRU 12" NOT SHOWN

IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-38
SELECTION
PAGE B11-23
FEATURES/BENEFITS
PAGE B11-3
Part
Name
S1U-SD-106
S1U-SD-107
S1U-SD-108
S1U-SD-109
S1U-SD-110
S1U-SD-111
S1U-SD-112
S1U-SD-114
S1U-SD-115
S1U-SD-200
S1U-SD-202
S1U-SD-203
S1U-SD-204
S1U-SD-206
S1U-SD-207
S1U-SD-208
S1U-SD-210
S1U-SD-211
S1U-SD-212
S1U-SD-213
S1U-SD-214
S1U-SD-215
S1U-SD-300
S1U-SD-303
S1U-SD-304
S1U-SD-306
S1U-SD-307
S1U-SD-308
S1U-SD-311
S1U-SD-312
S1U-SD-314
S1U-SD-315
S1U-SD-400
S1U-SD-407
S1U-SD-408
S1U-SD-415
S1U-SD-500
S1U-SD-507
S1U-SD-515
S1U-SD-600
S1U-SD-608
S1U-SD-615
S1U-SD-700
S1U-SD-715
S1U-SD-800
S1U-SD-808
S1U-SD-900
S1U-SD-908
S1U-SD-1000
S1U-SD-1100
S1U-SD-1200
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-39
SELECTION
PAGE B11-23
7
7
7
10
10
10
10
12
12
12
16
16
16
20
20
20
29
29
29
29
29
29
29
47
47
47
47
47
94
94
94
94
94
116
116
175
175
300
300
300
560
560
560
800
800
1380
1380
1380
1380
1890
1890
Bearing Reference
Guide
Part
Number
066500
066290
066501
066499
066312
066291
066502
066503
066292
066504
066506
066293
066507
066509
066294
066510
066511
066326
066512
066513
066514
066295
066515
066516
066517
066519
066296
066520
066521
066522
066523
066297
066524
066298
066526
066299
066527
066528
066530
066531
066533
066534
066535
066537
066538
066539
066540
066541
066542
066543
066544
Weight
Lbs
(Approx)
E-Family Roller
Bearings
Part
Part
Number
Name
1-3/8
066445
DU-SD-106
1-7/16
066280
DU-SD-107
1-1/2
066446
DU-SD-108
1-9/16
066444
DU-SD-109
1-5/8
066324
DU-SD-110
1-11/16
066281
DU-SD-111
1-3/4
066447
DU-SD-112
1-7/8
066448
DU-SD-114
1-15/16
066282
DU-SD-115
2
066464
DU-SD-200
2-1/8
066450
DU-SD-202
2-3/16
066283
DU-SD-203
2-1/4
066451
DU-SD-204
2-3/8
----------2-7/16
066284
DU-SD-207
2-1/2
066285
DU-SD-208
2-5/8
066455
DU-SD-210
2-11/16
066279
DU-SD-211
2-3/4
066456
DU-SD-212
2-13/16
066457
DU-SD-213
2-7/8
066458
DU-SD-214
2-15/16
066286
DU-SD-215
3
066459
DU-SD-300
3-3/16
066460
DU-SD-303
3-1/4
066461
DU-SD-304
3-3/8
066463
DU-SD-306
3-7/16
066287
DU-SD-307
3-1/2
066465
DU-SD-308
3-11/16
066466
DU-SD-311
3-3/4
066467
DU-SD-312
3-7/8
066468
DU-SD-314
3-15/16
066288
DU-SD-315
4
066469
DU-SD-400
4-7/16
066289
DU-SD-407
4-1/2
066471
DU-SD-408
4-15/16
066325
DU-SD-415
5
066472
DU-SD-500
5-7/16
066473
DU-SD-507
5-15/16
066475
DU-SD-515
6
066476
DU-SD-600
6-1/2
066478
DU-SD-608
6-15/16
066479
DU-SD-615
7
066480
DU-SD-700
7-15/16
066482
DU-SD-715
8
066483
DU-SD-800
8-1/2
066484
DU-SD-808
9
066485
DU-SD-900
DU-SD-908
9-1/2
066486
10
066487
DU-SD-1000
11
066488
DU-SD-1100
12
066489
DU-SD-1200
Note: When ordering sizes larger than 5, specify RPM
B-1 Units - Customer

Supplied Housing
Part
Part
Number
Name
066560
B1U-SD-106
066315
B1U-SD-107
066561
B1U-SD-108
066559
B1U-SD-109
066314
B1U-SD-110
066316
B1U-SD-111
066562
B1U-SD-112
066563
B1U-SD-114
066317
B1U-SD-115
066564
B1U-SD-200
066566
B1U-SD-202
066318
B1U-SD-203
066567
B1U-SD-204
066569
B1U-SD-206
066319
B1U-SD-207
066570
B1U-SD-208
066571
B1U-SD-210
066572
B1U-SD-211
066573
B1U-SD-212
066574
B1U-SD-213
066575
B1U-SD-214
066320
B1U-SD-215
066576
B1U-SD-300
066577
B1U-SD-303
066578
B1U-SD-304
066580
B1U-SD-306
066321
B1U-SD-307
066581
B1U-SD-308
066582
B1U-SD-311
066583
B1U-SD-312
066584
B1U-SD-314
066322
B1U-SD-315
066585
B1U-SD-400
066587
B1U-SD-407
066588
B1U-SD-408
066589
B1U-SD-415
066590
B1U-SD-500
066591
B1U-SD-507
066593
B1U-SD-515
066594
B1U-SD-600
066596
B1U-SD-608
066598
B1U-SD-615
066607
B1U-SD-700
066600
B1U-SD-715
066601
B1U-SD-800
066602
B1U-SD-808
066603
B1U-SD-900
----------066604
B1U SD 1000
066605
B1U-SD-1100
066606
B1U-SD-1200
Specialty Tapered
Products
S-1 Units - Expansion
S-2000
D Units - Non-Expansion
UNISPHERE II
Shaft
Size
Inches #
IMPERIAL
UNIFIED SAF
Bearing Reference
Guide
S
R
G HEX
G HEX
E-Family Roller
Bearings
N
A
L P
L P
Specialty Tapered
Products
D-UNIT
1-3/8" - 3-1/2"
3-11/16" - 6"
S
1-1/4"
S
1-1/4"
S-2000
A
L E
L E
UNISPHERE II
S1-UNIT
1-3/8" - 3-1/2"
3-11/16" - 6"
H HEX
H HEX
IMPERIAL
A
L
UNIFIED SAF
B
1-3/8" - 3-1/2"
FEATURES/BENEFITS
PAGE B11-3
L D
B1-UNIT
SPECIFICATION
B11-20
3-11/16" - 6"
HOW TO ORDER
B11-21
B11-40
SELECTION
PAGE B11-23
G
Hex
H
Hex
2.69
0.75
3.875
3.75
----
7/16
5/8
3.06
4.062
2.44
2.69
2.50
4.438
3.94
1.81
2.19
3.13
0.75
4.250
4.13
----
7/16
5/8
4.25
4.438
2.81
2.88
2.75
5.000
4.50
1.88
2.25
3.25
0.88
4.750
4.50
----
5/8
5/8
4.75
4.812
3.06
3.06
2.88
5.313
4.75
1.94
2.31
3.50
0.88
5.250
5.06
----
5/8
5/8
5.25
5.375
3.44
3.31
3.19
6.000
5.38
2.06
2.50
4.00
1.00
5.750
5.31
----
3/4
5/8
5.75
5.687
3.81
3.50
4.09
6.375
5.69
2.31
2.75
4.44
1.00
6.500
6.19
----
3/4
3/4
6.50
6.562
4.44
4.19
4.50
7.313
6.50
2.63
3.13
5.00
1.25
7.750
7-5/8
----
3/4
3/4
5.38
8.000
5.06
4.88
5.56
8.625
8.00
2.94
3.44
6.25
1.50
9.250
9.00
----
3/4
3/4
6.13
9.500
6.25
5.63
6.38
10.250
9.75
4.25
4.25
6.63
1.75
10.500
10-1/16
----
3/4
3/4
6.75
10.625
7.25
6.19
6.69
11.125
10.06
4.75
4.75
7.38
2.00
11.750
10-7/8
----
3/4
3/4
7.38
11.500
8.00
6.63
7.44
12.500
11.88
5.25
5.25
8.50
2.25
13.500
13.00
----
3/4
3/4
8.25
14.000
9.50
7.88
8.56
14.750
14.13
6.00
6.00
9.31
----
14.750
----
9.81
8.88
----
11.00
----
10.88
18.000
17.00
6.75
6.75
9.94
----
16.250
----
10.06
9.63
----
12.50
----
12.50
20.125
19.13
7.25
7.25
11.50
----
19.500
----
11.75
11.25
----
14.63
----
14.50
24.000
23.50
8.50
8.50
12.75
----
23 .000
----
13.25
13.00
----
17.00
----
17.63
28.500
28.00
9.25
9.25
FEATURES/BENEFITS
PAGE B11-3
+.000 -.003
+.000 -.004
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-41
SELECTION
PAGE B11-23
Bearing Reference
Guide
E-Family Roller
Bearings
Specialty Tapered
Products
1-3/8
1-7/16
4.00
1-1/2
1-9/16
1-5/8
4.13
1-11/16
1-3/4
1-7/8
1-15/16
4.25
2
2-1/8
2-3/16
4.56
2-1/4
2-3/8
2-7/16
5.06
2-1/2
2-5/8
2-11/16
2-3/4
2-13/16
5.75
2-7/8
2-15/16
3
3-3/16
3-1/4
3-3/8
6.38
3-7/16
3-1/2
3-11/16
3-3/4
3-7/8
8.50
3-15/16
4
4-7/16
9.50
4-1/2
4-15/16
10.50
5
5-7/16
5-15/16 12.00
6
6-1/2
6-15/16 13.50
7
7-15/16
14.50
8
8-1/2
9
17.00
9-1/2
10
11
18.50
12
+.000 -.002
-.000 -.004
S-2000
UNISPHERE II
Shaft
Size
Inches
IMPERIAL
UNIFIED SAF
Bearing Reference
Guide
Special Duty Hinged Cap Pillow Block - Inch
E-Family Roller
Bearings
Specialty Tapered
Products
F BOLT DIA.
S-2000
UNISPHERE II
NON-EXPANSION
A
N
IMPERIAL
EXPANSION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-42
SELECTION
PAGE B11-23
Part
Name
067055
067051
067057
067049
067043
067053
067061
067047
067045
067073
P2B-HC-106E
P2B-HC-107E
P2B-HC-108E
P2B-HC-111E
P2B-HC-112E
P2B-HC-115E
P2B-HC-200E
P2B-HC-203E
P2B-HC-207E
P2B-HC-215E

Non-Expansion
Shaft
Size
Inches
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-15/16

Expansion
Part
Name
Weight
Lbs
(Approx)
HS2-HC-406
HS2-HC-444
HS2-HC-481
HS2-HC-538
HS2-HC-569
HS2-HC-656
13
16
23
26
40
52
Shaft
Size
Range
Symbol#
106 TO 108
111 TO 112
115 TO 200
203
207
215
Part
Number
Part
Name
Weight
Lbs
(Approx)
067016
067103
067034
067123
067138
067075
HS2-HC-406E
HS2-HC-444E
HS2-HC-481E
HS2-HC-538E
HS2-HC-569E
HS2-HC-656E
13
16
23
26
40
52
S-2000
Shaft
Size
Part
Range
Number
Symbol#
106 TO 108
067007*
111 TO 112
067100*
115 TO 200
067031*
203
067120*
207
067135*
215
067078*
Weight
Lbs
(Approx)
20
20
20
27
27
36
36
47
60
60
F
Dia Bolt
4.13
7.25
3.00
5.88
1/2
.75
6.88
2.44
2.88
3.25
1.94
2.19
4.25
8.25
3.25
6.88
1/2
.75
6.88
2.81
3.13
3.53
2.00
2.25
4.44
9.25
3.50
7.69
5/8
.88
7.63
3.06
3.25
3.81
2.13
2.31
4.75
5.53
6.06
10.25
10.25
11.13
4.00
4.25
4.75
8.25
8.25
9.13
3/4
3/4
3/4
1.00
1.00
1.25
7.63
9.63
10.13
3.44
3.81
4.44
3.75
4.50
5.00
4.22
4.63
5.25
2.25
2.56
2.94
2.50
2.75
3.13
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-43
SELECTION
PAGE B11-23
UNISPHERE II
Part
Number
IMPERIAL
Shaft
Size
Inches #
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-15/16
Bearing Reference
Guide
Pillow Block Assembly - Expansion

Weight
Lbs
(Approx)
20
20
20
27
27
36
36
47
60
60
UNIFIED SAF
Pillow Block Assembly - Non-Expansion*

Shaft
Part
Part
Size
Number
Name
Inches #
1-3/8
067054
P2B-HC-106
1-7/16
067050
P2B-HC-107
1-1/2
067056
P2B-HC-108
1-11/16
067048
P2B-HC-111
1-3/4
067042
P2B-HC-112
1-15/16
067052
P2B-HC-115
2
067060
P2B-HC-200
2-3/16
067046
P2B-HC-203
2-7/16
067044
P2B-HC-207
2-15/16
067072
P2B-HC-215
E-Family Roller
Bearings
Special Duty Hinged Cap Pillow Block - Inch
Specialty Tapered
Products
Bearing Reference
Guide
Special Duty Hinged Cap S-1 Units - Inch
S
E-Family Roller
Bearings
A
E
Specialty Tapered
Products
1/4"
K
7/16"
C
B
Hinged Cap Pillow Block S-1 Units

S-2000
Shaft
Part
Size
Number
#
1-3/8
067149
1-7/16
067151
1-1/2
067152
1-11/16
067153
1-3/4
067154
1-15/16
067155
2
067156
2-3/16
067157
2-7/16
067159
2-15/16
067164
UNISPHERE II
Weight
Lbs
Approx
8
8
8
10
10
11
11
16
19
30
Part
Name
S1U406-HC-106
S1U406-HC-107
S1U406-HC-108
S1U444-HC-111
S1U444-HC-112
S1U481-HC-115
S1U481-HC-200
S1U538-HC-203
S1U569-HC-207
S1U656-HC-215
Hinged Caps S-1 Units
IMPERIAL
UNIFIED SAF
Shaft
Size
Inches
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-15/16
4.13
2.69
0.75
3.75
4.06
2.44
1.94
2.19
3.25
4.25
3.13
0.75
4.13
4.44
2.81
2.00
2.25
3.53
4.44
3.25
0.88
4.50
4.81
3.06
2.13
2.31
3.81
4.75
5.31
6.06
3.50
4.00
4.44
0.88
1.00
1.00
5.06
5.31
6.19
5.38
5.69
6.56
3.44
3.81
4.44
2.25
2.56
2.94
2.50
2.75
3.13
4.22
4.63
5.25
FEATURES/BENEFITS
PAGE B11-3
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-44
SELECTION
PAGE B11-23
Bearing Reference
Guide
Special Duty Traction Wheel Hub Assemblies - Inch
3 DIA.
2.00
13.81 2.00
0.31
0.81
(4) 0.75 DIA. BOLTS
1.25
13.69
7.19
0.75
6.222
6.220 DIA.
0.31
0.63
CL CHAIN
9.50
11.25 SQUARE
Specialty Tapered
Products
9.50
(6) 3/4 DIA. BOLTS
LOCATED ON A
7.75 B.C.
E-Family Roller
Bearings
0.75
SUPPORT
Traction Wheel Hub Assemblies are constructed to operate with wheels (sprockets) ranging from two to six feet in diameter. Commonly used in
overhead chain conveyors, the units bolt directly to the supporting structure and can be adjusted vertically to three different operating positions.
The hub utilizes combination seals to protect the tapered roller bearings from dust and dirt and retain lubricant.
S-2000
9.13 DIA.
Traction Wheel Hub Assemblies

Size
#
Part
Number
Part
Name
Weight
Lbs
(Approx)
Recommended
For
Conveyors With
Chain Nos.
#70
#70LS*
75HT
062040
422604
062070
TRW-70
TRW-70LS
TRW-75HT
100
80
100
348
458
678
RPM
10
10
10
Operating Characteristics
Max.
Resultant
Load
(Lbs)
3600
8000
8000
L10
Hours
Life
UNISPHERE II
A high temperature (700F) unit using sleeve bearings is available. See part number 062070
SPECIFICATION
B11-20
HOW TO ORDER
B11-21
B11-45
SELECTION
PAGE B11-23
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-3
IMPERIAL
Based on 180- Chain Wrap

More Than 100,000 Hrs. Life
* (LS) Less Support - Support For Mounting To Structure Not Included With This Part
(HT) High Temperature Sleeve Bearing
Bearing Reference
Guide
SPECIFICATION
All Steel
The standard housing material for All steel mounted bearings
is cast steel having a minimum tensile strength of 70,000 psi.
The housing is vertically split to enable servicing of the bearing
internal components. All Steel pillow blocks are available in both
expansion and non expansion types.
E-Family Roller
Bearings
All Steel mounted bearings have duplex tapered roller mounted

to the shaft with a tapered adaptor sleeve extending thru the
complete length of the pillow block. The tapered roller bearings

used in the All Steel mounted bearings all have case carburized
inner races (cones), outer race (cup) and rollers.
All Steel mounted bearings have two piston ring seals running
in grooves in the adapter nuts at each end of the pillow block to
seal the bearings both on and off the shaft.
Specialty Tapered
Products
S-2000
UNISPHERE II
ALL STEEL PILLOW BLOCKS AVAILABLE IN 4-BOLT BASE

2-11/16 TO 5
ALL STEEL CARTRIDGE UNITS AVAILABLE IN 2-11/16 TO

4-7/16
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-4
HOW TO ORDER
B11-47
SELECTION
PAGE B11-49
B11-46
PAGE B11-54

order by description, use the nomenclature key shown on the
next page and add any special instructions to the end of the
description for options not covered by the nomenclature.
of specialty lubricants and adjustments are available. Standard

grease provided is Mobilgrease XHP222. Special lubricant
Example:
063360 except with Mobil Grease HTS #2 grease
and or
P4B-AS-215 except with Mobil Grease HTS #2 grease
OTHER SPECIAL BEARING REQUIREMENTS NOT

LISTED
DODGE All Steel Bearings are factory assembled and

pre-lubricated. For applications where extreme ambient
temperatures, high speeds or high loads are expected, a variety

encourage you to contact out Customer Order Engineering
FEATURES/BENEFITS
PAGE B11-4
SPECIFICATION
B11-46
SELECTION
PAGE B11-49
B11-47
PAGE B11-54
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
SPECIAL BEARING REQUIREMENTS AND SPECIAL

LUBRICANTS
Bearing Reference
Guide

order processing.
E-Family Roller
Bearings
All Steel
Specialty Tapered
Products
HOW TO ORDER
Bearing Reference
Guide
NOMENCLATURE
P2B - C - 207 - E
E-Family Roller
Bearings
HOUSING STYLE
STYLE
P2B = PILLOW BLOCK
2 BOLT, CAST IRON
BEARING TYPE
SIZE
C = TYPE C
INCHES & 16TH

2 = 2 INCHES
07 = 7/16 INCHES
OR
207 = 2-7/16
SD = SPECIAL DUTY
P4B = PILLOW BLOCK
4 BOLT, CAST IRON
Specialty Tapered
Products
SP4B = PILLOW BLOCK

4 BOLT, CAST STEEL
HC = HINGED CAP
OTHER DATA
E = EXPANSION TYPE
BEARING
IF E DOES NOT APPEAR
AFTER SEAL TYPE, THEN
BEARING IS NON-EXPANSION
TYPE

AS = ALL STEEL

4 BOLT, CAST IRON
S-2000

BEARING, CAST IRON
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-4
SPECIFICATION
B11-46
SELECTION
PAGE B11-49
B11-48
PAGE B11-54
Roller Bearings have the capacity to carry heavy radial

loads and combined radial and thrust loads. The maximum
recommended load which can be applied is limited by various
components in the system such as bearing, housing, shaft,
shaft attachment, speed and life requirements as listed in this
catalog. DODGE tapered roller bearings have been applied
Engineering (864) 284-5700 for applications which exceed the
recommendations of this catalog.L10 Hours Life - The life which
may be expected from at least 90% of a given group of bearings
operating under identical conditions.
( )
C90
P
1,500,000
RPM
Where:
C90 = Dynamic Capacity (Table 10, pg. B11-52), lbs.

GENERAL
RPM Range
RECOMMENDED THRUST LOAD
20 - 200
201 - 2000
C90/4
C90/8

15, pg. B11-53 for maximum values. Where a load pulls the
housing away from the mounting base, both the hold-down
Heavy Service - For heavy shock loads, frequent shock loads, or severe
vibrations, add up to 50% (according to severity of conditions) to the
Equivalent Radial Load. Consult DODGE Application Engineering for
additional selection assistance.
Shaft
Size
2-11/16- 4
4-7/16 - 5
Tolerance,
Inches
+.000 To -.004
+.000 To -.005
Bearing Reference
Guide
IMPERIAL
UNISPHERE II
Thrust load values shown in the table below are recommended as a

guide for general applications that will give adequate L10 life for pillow
blocks. The maximum thrust load should not exceed values shown on
Table 12. Where substantial radial load is also present, it is advisable
FEATURES/BENEFITS
PAGE B11-4
SPECIFICATION
B11-46
PAGE B11-47
B11-49
PAGE B11-54
UNIFIED SAF
L10 =
10/3
to calculate actual L10 life to assure that it meets the requirements.

The effectiveness of the shaft attachment to carry thrust load depends
on proper tightening, shaft tolerance (see table below) and shaft
deflections. Therefore, it is advisable to use auxiliary thrust carrying
devices such as shaft shoulder, snap ring or a thrust collar to locate the
bearing under thrust loads heavier than shown below, or where extreme
reliability is desired.
E-Family Roller
Bearings
DODGE ALL-STEEL DOUBLE ROW TAPERED

ROLLER BEARINGS DODGE All-Steel Double Row Tapered
Specialty Tapered
Products
All Steel
S-2000
SELECTION
Bearing Reference
Guide
SELECTION
All Steel
ONLY
E-Family Roller
Bearings
2. Establish bearing radial load, FR

(FR = P for Pure Radial Load Conditions).
The DODGE program BEST can be used to find application
Since the L10, RPM, and P are known, solve for C90. Select from the
dynamic capacity column on Table 10, pg. B11-52 the C90 value equal to
or greater than the C90 value just calculated. The bore size on the far left
represents the bore size selection. Check that the application RPM does
not exceed the MAX. RPM on Table 10. When selecting an L10 life of less
than 30,000 hours, particular attention must be paid to shaft deflection
and proper lubricant selection.
loads.
3. Establish RPM.

Specialty Tapered
Products
Using the easy selection Table 11, pg. B11-52 find, under the RPM
column, the equivalent radial load that equals or is higher than the
application radial load for the desired life. The shaft size on the far left
will be the minimum shaft size that you can use for your application.
If the desired life is different than the values shown on the chart, use
alternate Method A shown below.
from Table 10 converts the applied thrust load and radial loads to an


3. RPM = 1,000
At the intersection of the 1,000 RPM column and the 30,000 hours L10
life row, the equivalent radial load of 4478 lbs. Exceeds the 3800 lbs.
Radial load for shaft sizes 2-11/16 -3. A bearing with bore ranging from
2-11/16 to 3 may be used for this application.
S-2000

SELECTION CHART.
The L10 life equation can be rearranged so that the bearing dynamic
capacity C is identified in terms of L10, RPM and P.
C90 =
L10 X RPM
1,500,000
0.3
X P
UNISPHERE II
The DODGE Bearing Evaluation and Selection Technique (BEST) is a menu driven computer program that calculates bearing loads, fatigue life
and operating temperature for a two bearing shaft system based on user supplied input parameters. This interactive program is available at www.
ptwizard.com under the Product Selection area.
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-4
SPECIFICATION
B11-46
PAGE B11-47
B11-50
PAGE B11-54
= Equivalent radial load, lbs.

= Radial load, lbs.(see Table 10 for
allowable slip fit maximum)
= Thrust (axial) load, lbs.
= Thrust load to radial load factor (Table 10)
= Radial load factor (Table 10)
= Thrust load factor (Table 10)
To find X and Y, calculate FA/FR and compare to e for the selected bore
size. Determine X and Y from Table 10, depending on whether FA/FR is
equal to or less than e, or FA/FR is greater than e. Substitute all known
values into the equivalent radial load equation. P (equivalent radial load)
can be used in the life formula to determine L10, or it can be compared
to the allowable equivalent radial load ratings for the speed and hours
life desired in the easy selection Table 11, pg. B11-52.

LOADS
In nearly all applications good design practice requires two bearings

supporting the shaft. In cases where three or more bearings are
installed, unless precautions are taken to line the bearings up, both
vertically and horizontally, it is possible to induce heavy loads. In the
case of two bearings, alignment is not as critical, especially with DODGE
All Steel Double Row Tapered Roller Bearings. All Steel bearings are
designed to allow as much as 1 to 2 of static misalignment depending
on bore size. To ensure good alignment, mounting surfaces must be
checked for flatness and must lie in the same plane. When tightening
base bolts and cap bolts, each bolt should be alternately tightened in
incremental torque values until full torque is achieved. Shimming may be
required to minimize misalignment.
IMPERIAL
UNISPHERE II
Tapered Roller Bearings perform extremely well under pure thrust load
applications. Use P = YFA for the equivalent radial load. The value of Y
is obtained from Table 1, pg. for FA/FR>e. Substitute Y and FA into the
equivalent load equation. P (equivalent radial load) can be used in the
life formula to determine L10 or it can be compared to the allowable
equivalent radial load ratings for the speed and hours life desired in the
easy selection Table 11, pg. B11-52.
FEATURES/BENEFITS
PAGE B11-4
SPECIFICATION
B11-46
PAGE B11-47
B11-51
PAGE B11-54
UNIFIED SAF
P
FR

FA
e
X
Y
DODGE All Steel Double Row Tapered roller bearings are lubricated
at the factory with a superior industrial grease that uses a lithium
hydroxystearate thickener and highly refined base oil. This grease will
adequately handle low and medium speeds with low and medium loads
at normal temperatures as defined on Table 14, pg. B11-53. For very low
and high speeds, for heavy loads and for low and high temperatures,
special greases must be used. Contact DODGE Application Engineering
(864) 284-5700. DODGE engineers will recommend bearings and
lubricants for the above unusual conditions. DODGE also has the
expertise to custom design and build special bearings for your needs.
The only maintenance requirement for DODGE Tapered roller bearings is
periodic relubrication at regular intervals as outlined in the appropriate
instruction manuals.
Bearing Reference
Guide
LUBRICATION
Where:
E-Family Roller
Bearings
Specialty Tapered
Products
All Steel
S-2000
SELECTION
Bearing Reference
Guide
SELECTION
All Steel
Table 10: All Steel Double Row Tapered Roller Bearings Radial and Thrust Factors
E-Family Roller
Bearings
Fa/Fr e
X
Y
2-11/16 - 3
0.43
0.87
2.02
3-1/4 - 3-1/2
0.49
0.87
1.77
3-15/16 - 4
0.34
0.87
2.53
4-7/16 - 4-1/2
0.36
0.87
2.45
4-15/16 - 5
0.34
0.87
2.53
COMPARING SPHERICAL TO TAPER ROLLER BEARING
The dynamic capacity C (spherical) and C90 (taper) are not to the same base. To
compare basic dynamic capacities, multiply C x .259 and compare to C90.
Shaft
Size
Fa/Fr>e
X
0.70
0.70
0.70
0.70
0.70
Dynamic Capacity C90*

Maximum
RPM
Y
Lbs.
Newtons
2.44
11,000
48,945
1,880
2.14
21,000
93,441
1,520
3.06
23,000
102,340
1,340
2.96
34,500
153,510
1,210
3.06
35,400
157,515
1,070
C90- Dynamic capacity based on a rated life of 90 million revolutions or 3000
hours at 500 RPM
Specialty Tapered
Products
Table 11: Easy Selection Table Dodge All-steel Double Row Tapered Roller Bearings
Shaft
Size
2-11/16
2-15/16
3
S-2000
3-1/4
3-7/16
3-1/2
3-15/16
4
UNISPHERE II
4-7/16
4-1/2
4-15/16
5
Hours
Life
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
5,000
10,000
30,000
50,000
100,000
50
18,829
15,294
11,000
9,437
7,665
35,947
29,198
21,000
18,016
14,634
39,371
31,979
23,000
19,732
16,027
59,056
47,968
34,500
29,598
24,041
60,597
49,220
35,400
30,370
24,668
100
15,294
12,423
8,935
7,665
6,226
29,198
23,716
17,057
14,634
11,886
31,979
25,975
18,682
16,027
13,018
47,968
38,962
28,023
24,041
19,527
49,220
39,979
28,754
24,668
20,037
250
11,618
9,437
6,787
5,823
4,730
22,181
18,016
12,958
11,117
9,030
24,293
19,732
14,192
12,175
9,889
36,440
29,598
21,288
18,263
14,834
37,390
30,370
21,843
18,739
15,221
Allowable Equivalent Radial Load Rating (Lbs.) at Various Revolutions Per Minute *
500
750
1000
1070
1210
1340
1520
1880
2180
2300
9,437
8,356
7,665
7,511
7,239
7,021
6,760
6,343
6,067
5,971
7,665
6,787
6,226
6,101
5,880
5,703
5,491
5,152
4,928
4,850
5,513
4,882
4,478
4,388
4,229
4,102
3,949
3,705
3,544
3,488
4,730
4,188
3,842
3,765
3,628
3,519
3,388
3,179
3,041
2,992
3,842
3,402
3,120
3,058
2,947
2,858
2,752
2,582
2,470
2,431
18,016 15,953 14,634 14,340 13,820 13,404 12,906 12,109 11,583 11,398
14,634 12,958 11,886 11,647 11,226 10,887 10,483 9,836
9,408
9,258
10,525 9,319
8,549
8,377
8,074
7,830
7,540
7,074
6,767
6,659
9,030
7,995
7,334
7,187
6,927
6,718
6,468
6,069
5,805
5,713
7,334
6,494
5,957
5,838
5,626
5,457
5,254
4,929
4,715
4,640
19,732 17,472 16,027 15,705 15,137 14,680 14,135 13,262 12,686 12,484
16,027 14,192 13,018 12,757 12,295 11,924 11,482 10,772 10,304 10,140
11,527 10,207 9,363
9,175
8,843
8,576
8,258
7,748 77,411 7,293
9,889
8,757
8,033
7,871
7,586
7,358
7,085
6,647
6,358
6,257
8,033
7,113
6,525
6,394
6,162
5,976
5,754
5,399
5,164
5,082
29,598 26,208 24,041 23,558 22,705 22,020 21,203 19,893 19,029 18,726
24,041 21,288 19,527 19,135 18,442 17,886 17,222 16,158 15,456 15,210
17,291 15,311 14,045 13,762 13,264 12,864 12,387 11,622 11,117 10,939
14,834 13,135 12,049 11,807 11,379 11,036 10,627 9,970
9,537
9,385
12,049 10,669 9,787
9,590
9,243
8,964
8,632
8,098
7,747
7,623
30,370 26,892 24,668 24,173 23,297 22,595 21,756 20,412 19,526 19,214
24,668 21,843 20,037 19,634 18,923 18,353 17,672 16,580 15,860 15,607
17,742 15,710 14,411 14,121 13,610 13,200 12,710 11,925 11,407 11,225
15,221 13,478 12,363 12,115 11,676 11,324 10,904 10,230 9,786
9,630
12,363 10,947 10,042 9,840
9,484
9,198
8,857
8,310
7,949
7,822
2700
5,690
4,622
3,324
2,852
2,316
10,863
8,823
6,346
5,444
4,422
11,897
9,664
6,950
5,963
4,843
17,846
14,496
10,426
8,944
7,265
18,312
14,874
10,698
9,178
7,455
2900
5,569
4,524
3,254
2,791
2,267
10,633
8,636
6,211
5,329
4,328
11,645
9,459
6,803
5,836
4,741
17,468
14,188
10,204
8,755
7,111
17,923
14,558
10,471
8,983
7,296
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-4
SPECIFICATION
B11-46
PAGE B11-47
B11-52
PAGE B11-54
3250
5,382
4,372
3,144
2,698
2,191
10,275
8,346
6,003
5,150
4,183
11,254
9,141
6,574
5,640
4,581
16,881
13,711
9,862
8,460
6,872
17,321
14,069
10,119
8,681
7,051
Table 12: All-steel Pillow Block Housing Permissible

Thrust Load, Lbs.
Bore Size,
Inches
2-11/16 - 3
3-1/4 - 3-1/2
3-15/16 - 4
4-7/16 - 4-1/2
4-15/16 - 5
Table 13: All-steel Pillow Block And Cartridge Total

Expansion Capability
Max.
Thrust (Lbs.)
9300
13800
13300
10400
14000
Bore Size,
Inches
2-11/16 - 3
3-1/4 - 3-1/2
3-15/16 - 4
4-7/16 - 4-1/2
4-15/16 - 5
Expansion
(Inches)
3/8
3/8
3/8
3/8
25/64
Bearing Reference
Guide
All Steel
E-Family Roller
Bearings
SELECTION
Table 14: Definition Of Operating Conditions For Tapered Roller

Bearings
Specialty Tapered
Products
Up To 20% Of Max. RPM (Table 10)

Over 20% To 80% Of Max. RPM
Over 80% Of Max. RPM
Up To 30% Of C90 (Table 10)
Over 30% To 70% Of C90
Over 70% Of C90
-100F To 20F
Over 20F To 200F
Over 200F To 300F
Over 300F To 400F
S-2000
Low Speed
Medium Speed
High Speed
Light Load
Normal Load
Heavy Load
Low Temperature
Medium Temperature
High Temperature
Very High Temperature
UNISPHERE II
P 180
Table 15: Housing Ratings All-steel Pillow Block
FEATURES/BENEFITS
PAGE B11-4
SPECIFICATION
B11-46
PAGE B11-47
B11-53
PAGE B11-54
UNIFIED SAF
2-11/16 - 3
3-1/4 - 3-1/2
3-15/16 - 4
4-7/16 - 4-1/2
4-15/16 - 5
IMPERIAL
HOUSING
STRENGTH, LBS.
180
30000
32000
34000
39000
39000
SHAFT
SIZE, (INCHES)
Bearing Reference
Guide
All Steel Pillow Block - Inch
4-BOLT BASE
E-Family Roller
Bearings
Specialty Tapered
Products
J
F BOLT DIA.
D MIN
D MAX
S-2000
B
grease fitting
UNISPHERE II
A
L
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-4
SPECIFICATION
B11-46
PAGE B11-47
B11-54
SELECTION
PAGE B11-49
Bearing Reference
Guide
SELECTION
All Steel Pillow Block - Inch
4-BOLT BASE
Part
Number
Part
Name
063359
063360
063361
063362
063363
063366
SP4B-AS-211
SP4B-AS-215
SP4B-AS-300
SP4B-AS-307
SP4B-AS-308
SP4B-AS-407
Cast Steel Expansion

Weight
Lbs
Approx
45
42
41
77
77
149
Shaft
Size
Inches #
2-11/16
2-15/16
3
3-7/16
3-1/2
4-7/16
Part
Number
Part
Name
063389
063390
063411
063392
063393
063396
SP4B-AS-211E
SP4B-AS-215E
SP4B-AS-300E
SP4B-AS-307E
SP4B-AS-308E
SP4B-AS-407E
Weight
Lbs
Approx
45
42
41
77
77
149
6.50
12.50
7.75
9.75
F
Bolt
Dia.
Exp*
Min.
Max.
3.75
10.31
10.69
2.00
5/8
0.94
1.63
7.50
4.00
3.75
3/8
14.50
4.50
11.88
12.63
2.38
3/4
1.13
1.88
9.00
4.69
4.50
3/8
18.75
5.25
14.81
15.69
3.25
7/8
1.31
2.25
11.38
6.00
5.75
3/8
S-2000
Specialty Tapered
Products
Shaft
Size
Inches
2-11/16
2-15/16
3
3-7/16
3-1/2
4-7/16
E-Family Roller
Bearings
Cast Steel Non-Expansion*

Shaft
Size
Inches #
2-11/16
2-15/16
3
3-7/16
3-1/2
4-7/16
FEATURES/BENEFITS
PAGE B11-4
SPECIFICATION
B11-46
PAGE B11-47
B11-55
PAGE B11-54
UNIFIED SAF
IMPERIAL
UNISPHERE II
* Total Expansion for Expansion Bearing Only
Bearing Reference
Guide
All Steel Cartridge Units - Inch
60-30'
E-Family Roller
Bearings
60-30'
60-30'
Specialty Tapered
Products
60-30'
S-2000
ANY LUBRICATION ARRANGEMENT

WHICH CONNECTS WITH HOLE IN
KEY MAY BE USED
"F" DIA. "G" HOLES SPACED

ON "D" DIA. B.C. AS SHOWN
17
43-30'
2-11/16" THRU 4-7/16" EXTERNAL

CONSTRUCTION
+.015
P -.000
+.005
K -.005
+.005
K -.005
+.002
C -.000
UNISPHERE II
FRAME SIZE
A
IMPERIAL
J
H
EXPANSION INTERNAL
CONSTRUCTION
NON-EXPANSION INTERNAL
CONSTRUCTION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B11-4
SPECIFICATION
B11-46
PAGE B11-47
B11-56
SELECTION
PAGE B11-49
Bearing Reference
Guide
Cast Steel Expansion
Shaft
Part
Part
Size
Number
Name
Inches #
2-11/16
063450
CRT-AS-211E
2-15/16
063451
CRT-AS-215E
3
063452
CRT-AS-300E
3-7/16
063454
CRT-AS-307E
3-15/16
063456
CRT-AS-315E
4-7/16
063459
CRT-AS-407E
Weight
Lbs
Approx
30
30
30
55
65
110
F
Bolt
Dia.
6.38
3/8
6.00
4.88
0.38
2.19
4.00
1.00
5/8
3.43
7.13
8.53
9.88
7/16
7/16
1/2
6.00
6.00
6.00
6.03
5.97
7.00
0.84
0.84
0.50
2.75
3.13
3.50
4.69
5.44
6.06
1.00
1.00
1.00
5/8
5/8
5/8
4.19
4.54
5.13
Exp*
3/8
FEATURES/BENEFITS
PAGE B11-4
SPECIFICATION
B11-46
PAGE B11-47
B11-57
SELECTION
PAGE B11-49
UNIFIED SAF
IMPERIAL
UNISPHERE II
Shaft
Size
A
B
C
Inches
2-11/16
2-15/16
6.50
7.13
5.70
3
3-7/16
7.75
8.75
7.20
3-15/16
8.00
9.50
7.89
4-7/16
9.25
10.84
9.07
* Total Expansion for Expansion Bearing Only
Weight
Lbs
Approx
30
30
30
55
65
110
S-2000
Cast Steel Non-Expansion*

Shaft
Part
Part
Size
Number
Name
Inches #
2-11/16
063420
CRT-AS-211
2-15/16
063421
CRT-AS-215
3
063422
CRT-AS-300
3-7/16
063424
CRT-AS-307
3-15/16
063426
CRT-AS-315
4-7/16
063429
CRT-AS-407
E-Family Roller
Bearings
All Steel Cartridge Units - Inch
Specialty Tapered
Products
Bearing Reference
Guide
NOTES
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
B11-58
B12-14
B12-30
B12-38
B12-42
B12-46
B12-48
B12-50
INDEX-1
KEYWORD-1
Bearing Reference
Guide
B12-2
B12-4
B12-4
B12-5
B12-7
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
Features / Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions

Pillow Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Piloted Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wide-Slot Take-Ups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TP Take-Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bearing Inserts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Key Word Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E-Family Roller
Bearings
S-2000
Specialty Tapered
Products
CONTENTS
B12-1
Bearing Reference
Guide
FEATURES/BENEFITS
S-2000
Longer Bearing Life By Design . . .
E-Family Roller
Bearings
High capacity double row spherical rollers offer up to 250% more L10 life than competitive brands
Larger rollers
More contact area
Case-carburized inner rings resist cracking
Static or dynamic misalignment up to 1
Specialty Tapered
Products
Patented nitrile multiple lip seal

resists heat and chemnical
breakdown
Expansion capability up to 3/8 (9.5mm)
Corrosion resistant flinger

blocks contaminants
Seal land maintains full seal

contact when misaligned
S-2000
Reinforced polyamide cage
UNISPHERE II
65 degree set screw

mounting (dual collar on
4-7/16 and larger sizes)
Optional metallic labryrinth

seal and steel cage provide
high temperature and high
speed capabilities
Installation Savings . . .
IMPERIAL
Factory lubed, sealed and adjusted, ready to slip onto the shaft
65 Springlok collar mount for increased holding power versus 90 or 120
Field convertible from non-expansion to expansion and expansion to non-expansion
Elongated pillow block bolt holes to facilitate mounting
UNIFIED SAF
B12-2
S-2000
E-Family Roller
Bearings
S-2000 Bearings Offer Patented Seal Options To

Maximize Bearing Life . . .
Bearing Reference
Guide
FEATURES/BENEFITS
TRIDENT Seals for low to medium speed

Face rubbing triple lip seal
Flinger to shield seal and bearing from contamination/damage
Seal/land positive contact up to 1 degree of misalignment
Specialty Tapered
Products
Patented design
High speed for relatively clean environments

Flinger shields seal and bearing from contamination/damage
S-2000
Labyrinth seals for higher speeds
Seal operates with up to 1 degree of misalignment
B12-3
UNIFIED SAF
IMPERIAL
UNISPHERE II
Patented design
Bearing Reference
Guide
SPECIFICATION
S-2000
INCH
E-Family Roller
Bearings
DODGE Spherical Bearings, including S-2000 bearings,

are general purpose, high-capacity, double-row spherical
roller bearings. All are mounted in single piece precision
machined housings. Bearings are mounted to shafts by
means of set screw collars, with 65 degree set screw
spacing for maximum clamping force.
ASTM A48 Class 30 cast iron is the standard material
used in S-2000 housings. A-27 Grade 70-36 Class 1
Steel is the standard material used in Steel S2000-HD
housings. Housing designs are available for survival in

extreme harsh environments, through the use of special
finishes and stainless hardware.
Housings are available in a variety of standard
configurations, including pillow blocks, flanges, piloted
flanges and take-up bearings. TRIDENT triple lip contact
seal and Labyrinth seals are available on
S-2000 bearings.
Specialty Tapered
Products
S-2000
UNISPHERE II
HOW TO ORDER
greases available include Mobil HTS #2. Other special lubricants
are available upon request. Special lubricant options usually
involve set-up charges, minimum quantities and list price
premiums. To order, specify type of lubricant required at the end
of the product name or after the standard part number.

the product offerings have part numbers with listings shown
order processing.
IMPERIAL

when ordering units that include modifications or options.
To order by description, use the nomenclature key shown on
page B12-5 and add any special instructions to the end of the
Example: 070320 except with Mobil HTS #2 grease

or
P2BS2108L except with Mobil HTS #2 grease
UNIFIED SAF
DODGE Spherical Bearings are factory adjusted and

temperatures, high speeds, or high loads are expected, a variety
of specialty lubricants is available. Standard grease provided is
lithium complex base Mobilgrease XHP222. High temperature
FEATURES/BENEFITS
PAGE B12-2
For applications requiring modifications not listed, we encourage

you to contact our Application Engineering Department for
Bearings at 864-284-5700.
PAGE B12-4
SELECTION
PAGE B12-7
B12-4
DIMENSIONS
PAGE B12-14
Bearing Reference
Guide
S-2000
S E P2B - S2 - 207 - R E
P2B =
Pillow Block
2-Bolt Base,
Cast Iron
P4B =
Pillow Block
4-Bolt Base,
Cast Iron
F3R =
Flange Bearing
3-Bolt,
Cast Iron,
Round
F4S =
Flange Bearing
4-Bolt,
Cast Iron,
Square
F4R =
Flange Bearing
4-Bolt,
Cast Iron,
Round
FC =
Piloted
Flanged
(Flanged
Cartridge)
S prefix
denotes cast
steel housing
S2 =
S-2000
SIZE
SEAL
Inches and 16th
R=
TRIDENT Triple
E=
Lip Rubbing Seal
2 = 2
07 = 7/16
207 = 2-7/16
L=
Labyrinth
Metallic Seal
OTHER DATA
Expansion
Type Bearing
- If E Does
Not Appear,
Bearing Is Non
Expansion Type
Specialty Tapered
Products
E prefix
denotes Type
E dimensioned
housing
with S2000
spherical roller
bearing insert *
BEARING
TYPE
S-2000
HOUSING
STYLE
E-Family Roller
Bearings
NOMENCLATURE
UNISPHERE II
WSTU = Wide Slot

Take-Up
Bearing For
Use In CenterPull Frames
* Available in two or four bolt pillow blocks, four bolt square flanges and piloted flanges
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
SELECTION
PAGE B12-7
B12-5
DIMENSIONS
PAGE B12-14
UNIFIED SAF
IMPERIAL
TPHU = TPHU Take-up

Bearing For
Use In TPHU
Or Top Angle
Take-Up Frames
Bearing Reference
Guide
FEATURES/BENEFITS
S-2000-E
E-Family Roller
Bearings
Specialty Tapered
Products
Interchangeable with Type E style pillow blocks and

flanges
2-bolt pillow blocks in sizes

1-3/8 to 3-7/16
Same proven DODGE S-2000 double row spherical

insert
4-bolt pillow blocks in sizes

2-7/16 to 4-15/16
65 springlock collar mounting

Up to 1 misalignment capability
Flange bearings in sizes

1-3/8 to 4-7/16
Seal land on OD of inner ring maintains full contact

pressure even when misaligned
Piloted flange bearings in sizes 1-3/8 to

4-15/16
High capacity double row spherical bearing

S-2000
S-2000-HD
UNISPHERE II
IMPERIAL
UNIFIED SAF
Dodge S2000-HD mounted bearings feature proven

S2000 technology deployed in steel housings designed
specifically for harsh applications that demand superior
housing strength. Major features include set screw
mounting systems, high capacity cast steel housings with
industry common dimensions, as well as high capacity,
double row spherical inserts that are protected with either
one of two effective sealing systems plus both closed &
shaft-through end covers.
In addition, S2000-HD feature single piece, sealed inserts

that can be easily replaced in the field, without the time &
trouble of a bearing tear down & rebuild. Field conversion
between Non-Expansion & Expansion (fixed & float) can
also be accomplished with the repositioning of a single
snap ring.
Housing configurations include two and four bolt base
pillow blocks, and four bolt flanges.
B12-6
DODGE Spherical Roller Bearings have the capacity to carry

heavy radial loads and combined radial and thrust loads. The
maximum recommended load which can be applied is limited
by various components in the system such as bearing, housing,
shaft, shaft attachment, speed and life requirements as listed in
this catalog. DODGE spherical roller bearings have been applied
Engineering (864-284-5700) for applications which exceed the
L10 Hours Life - The life which may be expected from at least
conditions.
L10 Life, Hours =
10/3
( )
C
P
16667
RPM
The magnitude and direction of both the thrust and radial

load must be taken into account when selecting a housing.
When pillow blocks are utilized, heavy loads should be
directed through the base. Where uplift loads are involved,
see Tables6, 7 and 8 on pages B12-12 and B12-13 and for
maximum values. Where a load pulls the housing away from
the mounting base, both the hold-down bolts and housing must
be of adequate strength. Auxiliary load carrying devices such as
shear bars are advisable for side or end loading of pillow blocks
and radial loads for flange units.
Shaft Tolerances
Shaft Size
UP TO 1-1/2
1-9/16 TO 4
4-7/16 TO 5
Where: C = Dynamic Capacity

(Table1 on pageB12-9) lbs.

low speed, is very large, the shaft should be checked to assure

S-2000
+.0000 -.0005
+.000 -.001
+.000 -.0015
Bearing Reference
Guide
SPHERICAL ROLLER BEARINGS
E-Family Roller
Bearings
S-2000
Specialty Tapered
Products
SELECTION
BEARING SUPPORTING RADIAL LOADS ONLY

(FR = P for Pure Radial Load Conditions). The
DODGE program BEST can be used to find
application loads.
Heavy Service - For heavy shock loads, frequent shock loads,

or severe vibrations, add up to 50% (according to severity
of conditions) to the Equivalent Radial Load to obtain a
Modified Equivalent Radial Load. Consult DODGE Application
Engineering for additional selection assistance.
201 - 2000
C/40

the 4000 lbs. radial load for shaft size 2-7/16. A bearing with
bore 2-7/16, or larger, may be used for this application.
Over 2000
C/60

normal radial and radial/thrust load applications. The radial load
is limited by the attachment to the shaft (see Table 1 on page
B12-9). Where the applied radial load (FR) exceeds this limit
(maximum allowable slip fit radial load), a snug-to-light press fit
of the shaft is required. Since the allowable load, especially at a
FEATURES/BENEFITS
PAGE B12-2
The DODGE Bearing Evaluation and Selection Technique (BEST) is a

menu driven computer program that calculates bearing loads, fatigue
life and operating temperature for a two bearing shaft system based on
user supplied input parameters. This interactive program is available at
www.ptwizard.com under the Product Selection area.
SPECIFICATION
PAGE B12-4
PAGE B12-5
B12-7
DIMENSIONS
PAGE B12-14
UNIFIED SAF
20-200
C/20


3. RPM = 1,020
IMPERIAL
Using the easy selection Table4 on page B12-10, find, under

the RPM column, the equivalent radial load that equals or is
slightly higher than the application radial load for the desired
life. The shaft size on the far left will be the minimum shaft size
that you can use for your application.
If the desired life is different than the values shown on the chart,
use alternate Method A shown below.
UNISPHERE II
3. Establish RPM.

as a guide for general applications that will give adequate L10
life. Spherical bearings require a radial load at least equal to
the thrust load for proper operation. If the thrust load exceeds
this limit, consult Application Engineering. Where substantial
radial load is also present, it is advisable to calculate actual L10
life to assure that it meets the requirements. The effectiveness
of the shaft attachment to carry thrust load depends on
proper tightening of the set screws, shaft tolerance and shaft
deflections. Therefore, it is advisable to use auxiliary thrust
carrying devices such as shaft shoulder, snap ring or a thrust
collar to locate the bearing under thrust loads heavier than
shown below, or where extreme reliability is desired.
RPM
Recommended Thrust Load
S-2000
GENERAL
Bearing Reference
Guide
SELECTION
SELECTION CHART.
or FA/FR is greater than e. Substitute all known values into the

equivalent radial load equation. P (equivalent radial load) can be
used in the life formula to determine L10, or it can be compared
to the allowable equivalent radial load ratings for the speed and
hours life desired in the easy selection Table4 on page B12-10.

dynamic capacity C is identified in terms of L10, RPM and P
E-Family Roller
Bearings
C=

LOADS
0.3
L10 X RPM
16667
Spherical Roller Bearings generally are not recommended

for pure thrust load applications. However, they will perform
satisfactorily under very light pure thrust loads. Consult DODGE
Application Engineering (864-284-5700).
X P
Specialty Tapered
Products
Since the L10, RPM and P are known, solve for C. Select from
the dynamic capacity column on Table 1 on page B12-9 the
C value equal to or greater than the C value just calculated.
The bore size on the far left represents the proper bore size
selection. Check that the application RPM does not exceed
the MAX. RPM on Table 1. Also check that the radial load does
not exceed the Maximum Allowable Slip Fit Radial Load shown
on Table1 on page B12-9. If it does, a line-to-line to light
press fit of shaft is required. When selecting an L10 life of less
than 30,000 hours, particular attention must be paid to shaft
deflection and proper lubricant selection.
SELECTING LUBRICATION

S-2000
from Table 1 converts the applied thrust load and radial loads to an
The equivalent radial load P = XFR + YFA

UNISPHERE II
Where:
P = Equivalent radial load, lbs.
FR = Radial load, lbs. (see Table 1 for allowable slip fit

maximum load)
FA = Thrust (axial) load, lbs.
X
IMPERIAL

selected bore size. Determine X and Y from Table 1 on page
B12-9 depending on whether FA/FR is equal to or less than e,
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
DODGE S2000 spherical roller bearings are lubricated at the

factory with Mobilgrease XHP 222 grease. Mobilgrease XHP 222
grease is a superior industrial grease using a lithium complex
thickener and highly refined base oil. This grease will adequately
handle low and medium speeds with low and medium loads at
normal temperatures as defined on Table5 on page B12-11. For
very low and high speeds, for heavy loads and for low and high
temperatures, special greases must be used. Contact DODGE
Application Engineering (864-284-5700). DODGE engineers
will recommend bearings and lubricants for the above unusual
conditions. DODGE also has the expertise to custom design and
build special bearings for your needs. The only maintenance
requirement for DODGE Unitized roller bearings is periodic
relubrication at regular intervals as outlined in the appropriate
MISALIGNMENT CONSIDERATIONS
In nearly all applications, good design practice requires two
bearings up both vertically and horizontally, it is possible to
not as critical, especially with DODGE Unitized Spherical Roller
Bearings. S2000 bearings are designed to allow a maximum
of 1 of static and dynamic misalignment. To ensure good
alignment, mounting surfaces must be checked for flatness and
must lie in the same plane. When tightening base bolts, each
SPECIFICATION
PAGE B12-4
PAGE B12-5
B12-8
DIMENSIONS
PAGE B12-14
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
Basic
Bearing
Description
22208
Max.
Allowable
Slip Fit
Radial Load
FR*
lbs.
Dynamic
Capacity
(C)
lbs.
Static
Capacity
Co
lbs.
Maximum Speed **
Labyrinth
RPM
TRIDENT
Triple Lip
RPM
21,000
3,600
2,900
20,800
22,000
3,360
2,460
4,000
22,000
24,000
3,180
2,200
4.3
4.2
4,860
6,840
27,000
39,000
29,000
47,500
2,700
2,250
1,950
1,740
0.67
4.6
7,500
41,500
53,000
2,040
1,490
0.67
0.67
0.67
0.67
4.3
4.2
4.1
3.9
11,500
14,400
18,400
25,700
65,500
83,000
104,000
146,000
81,500
104,000
132,000
196,000
1,560
1,320
1,200
1,020
1,280
1,075
990
870
0.28
1.0
2.4
0.67
3.6
3,750
20,800
22209
0.26
1.0
2.6
0.67
3.9
3,750
22210
0.24
1.0
2.8
0.67
4.2
22211
22213
0.23
0.24
1.0
1.0
2.9
2.8
0.67
0.67
22215
0.22
1.0
3.1
22218
22220
22222
22226
0.23
0.24
0.25
0.26
1.0
1.0
1.0
1.0
2.9
2.8
2.7
2.6
After final alignment of the shaft and installation of the housings,

tighten both setscrews hand tight, then the setscrews should be
tightened alternately and in small increments to the torque specified in
Table 2. After 24 hours operation, the setscrews should be retightened to
the torque in Table 2 to assure full locking of the inner race to the shaft.
Care should be taken that the socket key or driver is in good condition
with no rounded corners and the key is fully engaged in the setscrew
and held square with the setscrew to prevent rounding out of the
setscrew socket when applying maximum torque.
Table 3: Lubrication Intervals

Lubrication Guide (In Weeks)
Read Preceding Paragraphs Before Establishing Lubrication Schedule
Hours
Run per
Day
1 to
250
RPM
8
16
24
12
12
10
251 to 501 to 751 to 1001 to 1501 to 2001 to 2501 to

500
750
1000
1500
2000
2500
3000
RPM
RPM
RPM
RPM
RPM
RPM
RPM
12
7
5
10
5
3
7
4
2
5
2
1
4
2
1
Table 2: Set Screw Torque Values

Set Screw Torque Table
Socket Set Screw Size
5/16 in.
3/8 in.
1/2 in.
5/8 in.
FEATURES/BENEFITS
PAGE B12-2
Tightening Torque
165 Inch Pounds
290 Inch Pounds
620 Inch Pounds
1325 Inch Pounds
3
2
1
2
1
1
IMPERIAL
Shaft Size
1-3/8 - 1-3/4 in.
1-15/16 - 2-7/16 in.
2-11/16 - 3-7/16 in.
3-15/16 - 4-15/16 in.
S-2000
* If load exceeds the maximum allowable slip fit load, line- to-line to light press fit of shaft required. Maximum slip fit radial loads apply if recommended shaft sizes are used.
** Maximum speed is dependent on load and ambient conditions, consult DODGE Engineering.
UNISPHERE II
Shaft Size
Inches
FA/FR>e
SPECIFICATION
PAGE B12-4
PAGE B12-5
B12-9
DIMENSIONS
PAGE B12-14
UNIFIED SAF
FA/FR< e
Bearing Reference
Guide
Table 1: S2000-HD Spherical Roller Bearings
E-Family Roller
Bearings
S-2000
Specialty Tapered
Products
SELECTION
Bearing Reference
Guide
SELECTION
S-2000
Table 4: Easy Selection Table for S-2000 Double Row Spherical Roller Bearings
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
Shaft
L10
Allowable Equivalent Radial Load Rating (lbs.) at Various Revolutions per Minute
Size
Life
50
100
150
250
500
870
1,020 1,200 1,320 1,560 1,750 2,040 2,250 2,700
Inches Hours
10,000 7,498 6,090 5,393 4,626 3,758 3,182 3,034 2,890 2,808 2,671 2,581 2,465 2,393 1,495
1-3/8 30,000 5,393 4,380 3,878 3,327 2,703 2,289 2,182 2,078 2,020 1,921 1,856 1,773 1,721 1,495
to
40,000 4,947 4,018 3,558 3,052 2,479 2,100 2,002 1,907 1,853 1,762 1,703 1,626 1,579 1,495
1-1/2 60,000 4,380 3,558 3,150 2,703 2,195 1,859 1,773 1,688 1,641 1,560 1,508 1,440 1,398 1,324
100,000 3,758 3,052 2,703 2,319 1,883 1,595 1,521 1,448 1,407 1,339 1,293 1,235 1,199 1,136
10,000 7,498 6,090 5,393 4,626 3,758 3,182 3,034 2,890 2,808 2,671 2,581 2,465 1,579 2,266
1-11/16 30,000 5,393 4,380 3,878 3,327 2,703 2,289 2,182 2,078 2,020 1,921 1,856 1,773 1,579 1,630
to
40,000 4,947 4,018 3,558 3,052 2,479 2,100 2,002 1,907 1,853 1,762 1,703 1,626 1,579 1,495
1-3/4 60,000 4,380 3,558 3,150 2,703 2,195 1,859 1,773 1,688 1,641 1,560 1,508 1,440 1,398 1,324
100,000 3,758 3,052 2,703 2,319 1,883 1,595 1,521 1,448 1,407 1,339 1,293 1,235 1,199 1,136
10,000 7,930 6,441 5,704 4,893 3,975 3,366 3,209 3,057 2,970 2,825 2,729 1,720 2,531 2,396
1-15/16 30,000 5,704 4,633 4,102 3,519 2,859 2,421 2,308 2,198 2,136 2,032 1,963 1,720 1,820 1,724
to
40,000 5,232 4,250 3,763 3,228 2,622 2,221 2,117 2,017 1,960 1,864 1,801 1,720 1,670 1,581
2
60,000 4,633 3,763 3,332 2,859 2,322 1,966 1,875 1,786 1,735 1,650 1,594 1,523 1,479 1,400
100,000 3,975 3,228 2,859 2,452 1,992 1,687 1,608 1,532 1,489 1,416 1,368 1,306 1,269 1,201
10,000 9,733 7,905 7,000 6,005 4,878 4,131 3,939 3,751 3,645 3,467 2,210 3,199 3,106 2,941
30,000 7,000 5,686 5,035 4,319 3,508 2,971 2,833 2,698 2,622 2,494 2,210 2,301 2,234 2,115
2-3/16 40,000 6,421 5,216 4,618 3,962 3,218 2,726 2,599 2,475 2,405 2,288 2,210 2,111 2,050 1,940
60,000 5,686 4,618 4,089 3,508 2,850 2,413 2,301 2,191 2,130 2,026 1,957 1,869 1,815 1,718
100,000 4,878 3,962 3,508 3,010 2,445 2,070 1,974 1,880 1,827 1,738 1,679 1,603 1,557 1,474
10,000 14,058 11,419 10,111 8,674 7,046 5,967 5,689 5,418 5,266 5,008 4,838 4,621 4,487
30,000 10,111 8,213 7,272 6,239 5,068 4,292 4,092 3,897 3,787 3,602 3,480 3,324 3,227
2-7/16 40,000 9,275 7,534 6,671 5,723 4,649 3,937 3,753 3,575 3,474 3,304 3,192 3,049 2,960
60,000 8,213 6,671 5,907 5,068 4,116 3,486 3,324 3,165 3,076 2,926 2,827 2,700 2,621
100,000 7,046 5,723 5,068 4,348 3,531 2,991 2,851 2,716 2,639 2,510 2,425 2,316 2,249
10,000 14,959 12,151 10,759 9,230 7,497 6,350 6,054 5,766 3,697 5,329 5,149 4,917
30,000
10,759 8,739 7,738 6,639 5,392 4,567 4,354 4,147 3,697 3,833 3,703 3,537
2-11/16
40,000 9,870 8,017 7,098 6,090 4,946 4,189 3,994 3,804 3,697 3,516 3,397 3,244
to
3
60,000 8,739 7,098 6,285 5,392 4,380 3,709 3,537 3,368 3,273 3,113 3,008 2,873
100,000 7,497 6,090 5,392 4,626 3,758 3,182 3,034 2,890 2,808 2,671 2,580 2,464
10,000 23,611 19,178 16,981 14,569 11,833 10,022 9,555 6,004 8,844 8,411
30,000 16,981 13,793 12,213 10,478 8,511 7,208 6,872 6,004 6,360 6,050
3-7/16 40,000 15,577 12,653 11,203 9,612 7,807 6,612 6,304 6,004 5,835 5,549
60,000 13,793 11,203 9,920 8,511 6,913 5,855 5,582 5,316 5,166 4,914
100,000 11,833 9,612 8,511 7,302 5,931 5,023 4,789 4,561 4,432 4,216
Only the labyrinth seal (L seal) may be used to the right of the heavy line.
In the light shaded area, a line-to-line to light press fit on the shaft is required.
For applications in the dark shaded area, the maximum load for the specific speed is shown. The load does not correspond to the 10 shown at the left.
3180
3360
3600
2,157
1,552
1,423
1,260
1,081
2,157
1,552
1,423
1,260
1,081
2,282
1,641
1,505
1,333
1,144
2,122
1,526
1,400
1,240
1,063
2,122
1,526
1,400
1,240
1,063
2,078
1,495
1,371
1,214
1,042
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-5
B12-10
DIMENSIONS
PAGE B12-14
Bearing Reference
Guide
SELECTION
S-2000
Table 4: Easy Selection Table for S-2000 Double Row Spherical Roller Bearings (continued)
3360
S-2000
Table 5: Definition Of Operating Conditions For Unitized Spherical

Roller Bearings
MOVER 80% OF MAX. RPM
UP TO 8% OF C (TABLE 1)
OVER 8% TO 18% OF C
OVER 18% OF C
C= DYNAMIC CAPACITY
-20 TO -100F
OVER 20F TO 200F
OVER 200F TO 250F
LIGHT LOAD
NORMAL LOAD
HEAVY LOAD
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-5
B12-11
DIMENSIONS
PAGE B12-14
UNIFIED SAF
IMPERIAL
LOW TEMPERATURE
MEDIUM TEMPERATURE
HIGH TEMPERATURE
UNISPHERE II
LOW SPEED
MEDIUM SPEED
HIGH SPEED
3600
E-Family Roller
Bearings
3180
Specialty Tapered
Products
Shaft
L10
Size
Life
50
100
150
250
500
870
1,020 1,200 1,320 1,560 1,750 2,040 2,250 2,700
Inches Hours
10,000 29,919 24,302 21,518 18,461 14,995 12,699 7,988 11,531 11,206
30,000 21,518 17,478 15,476 13,278 10,785 9,134 7,988 8,294 8,060
3-15/16 40,000 19,739 16,033 14,197 12,180 9,893 8,378 7,988 7,608 7,393
60,000 17,478 14,197 12,571 10,785 8,760 7,419 7,073 6,737 6,547
100,000 14,995 12,180 10,785 9,252 7,515 6,365 6,068 5,779 5,616
10,000 37,489 30,450 26,963 23,132 18,789 10,498 15,171 14,449
30,000 26,963 21,901 19,392 16,637 13,513 10,498 10,911 10,392
4-7/16 40,000 24,733 20,090 17,789 15,261 12,396 10,498 10,009 9,533
60,000 21,901 17,789 15,751 13,513 10,976 9,296 8,863 8,441
100,000 18,789 15,261 13,513 11,593 9,417 7,975 7,603 7,242
10,000 52,628 42,747 37,851 32,473 26,377 14,738 21,298
30,000 37,851 30,745 27,224 23,356 18,971 14,738 15,318
4-15/16 40,000 34,722 28,203 24,973 21,424 17,402 14,738 14,051
60,000 30,745 24,973 22,112 18,971 15,409 13,050 12,442
100,000 26,377 21,424 18,971 16,275 13,220 11,196 10,674
For applications in the dark shaded area, the maximum load for the specific speed is shown. The load does not correspond to the L10 shown at the left.
Bearing Reference
Guide
SELECTION
S-2000
E-Family Roller
Bearings
120
180
150
Specialty Tapered
Products
Table 6: S-2000 Housing Rating, 2-Bolt, Cast Iron*

Bore Size
S-2000
1-3/8 to 1-1/2
1-5/8 to 1-3/4
1-15/16 to 2
2-3/16
2-7/16
2-11/16 to 3
3-3/16 to 3-7/16
3-15/16
120
2110
2380
3130
3330
3330
4420
4620
7500
Maximum Recommended Housing Cap Loads, lb

150
2640
2980
3910
4160
4160
5520
5780
9350
180
3100
3500
4600
4900
4900
6500
6800
11000

150
4000
4100
4760
5780
5870
9350
12330
16750
180
4700
4800
5600
6800
6900
11000
14500
19700
Table 7: S-2000 Housing Rating, 4-Bolt, Cast Iron*

Bore Size
UNISPHERE II
1-15/16 - 2
2-3/16
2-7/16
2-11/16 to 3
3-7/16
3-15/16
4-7/16
4-15/16
120
3200
3300
3810
4620
4700
7500
9900
13400
IMPERIAL
* When utilizing heavy cap loads on pillow block housings, the installation must adhere to the following procedures:
1. The pillow block base bolts must be of high strength (Grade 8) bolts and properly tightened to mounting structure.
2. Stop bars (shear strips) should be used against the plummer block where side loads are encountered.
3. In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and life requirements.
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-5
B12-12
DIMENSIONS
PAGE B12-14
Bearing Reference
Guide
SELECTION
E-Family Roller
Bearings
S2000-HD
Table 8: Steel Housed S2000 - Housing Ratings*

Shaft Sizes
Basic Bearing Description
Maximum Recommended Housing Loads, lb

P2B
P4B
22209
26400
22210
30200
2-3/16
22211
35400
2-7/16
22213
51300
1-1/2
1-11/16
1-3/4
1-15/16
2
IMPERIAL
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-5
B12-13
DIMENSIONS
PAGE B12-14
UNIFIED SAF
52800
2-11/16
2-15/16
22215
59700
60000
3
3-7/16
22218
90700
95500
3-15/16
22220
115000
4-7/16
22222
152100
4-15/16
22226
188200
* It is important to note that the values listed above are housing fracture loads from variou applied directions. These loads may exceed

bearing, mounting bolt and/or shaft capacities. Applications subject to heavy housing loads, particularly shock loads, must adhere to the

following procedures:
(1) The pillow block base bolts must be of high strength (Grade 8) bolts and properly tightened to mounting
structure.
(2) Stop bars (shear strips) should be used against the plummer block where side loads are encountered.
(3) In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and life
requirements.,
S-2000
24400
UNISPHERE II
22208
Specialty Tapered
Products
1-3/8
1-7/16
Bearing Reference
Guide
DIMENSIONS
S-2000 Pillow Block
2-BOLT BASE - INCH
E-Family Roller
Bearings

1/8-27 NPT hydraulic
grease fitting
30
G
F BOLT DIA.
Specialty Tapered
Products
D MIN
D MAX
B
S-2000
Y
MAX
UNISPHERE II
Z
MIN
IMPERIAL
NON-EXPANSION
EXPANSION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-14
SELECTIONS
PAGE B12-7
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
22208
22209
22210
22211
22213
22215
22218
22220
Bearing Reference
Guide
Min
Max
F
Bolt
Dia.
X
Total
Exp.
2.53
6.88
1.95
4.81
5.20
1/2
0.81
1.13
3.88
2.75
1.88
0.88
1.66
3/16
0.020
1.80
2.67
7.38
2.06
5.31
5.70
1/2
0.81
1.25
4.27
3.19
2.13
0.81
1.86
1/4
0.020
2.08
2.84
8.38
2.50
6.06
6.44
5/8
0.95
1.31
4.56
3.44
2.25
0.86
1.98
1/4
0.020
2.30
2.94
3.20
8.88
9.25
2.63
2.81
6.56
6.94
6.94
7.31
5/8
5/8
0.95
0.95
1.50
1.63
5.00
5.59
3.75
4.06
2.50
2.75
0.91
1.13
2.03
2.08
1/4
1/4
0.025
0.025
2.60
2.95
3.59
10.44
3.08
7.94
8.31
3/4
1.06
1.88
6.38
4.70
3.25
1.14
2.45
1/4
0.025
3.47
4.02
4.47
13.00
15.25
3.42
3.94
9.38
10.63
10.63
12.88
7/8
1
1.63
2.25
2.25
2.44
7.50
8.38
5.50
6.00
3.75
4.25
1.41
1.56
2.61
2.91
1/4
5/16
0.025
0.025
4.05
4.50
IMPERIAL
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070318
P2B-S2-106L
070341
P2B-S2-106LE
070319
P2B-S2-107L
070342
P2B-S2-107LE
070320
P2B-S2-108L
070343
P2B-S2-108LE
070322
P2B-S2-111L
070345
P2B-S2-111LE
070323
P2B-S2-112L
070346
P2B-S2-112LE
070324
P2B-S2-115L
070347
P2B-S2-115LE
070325
P2B-S2-200L
070348
P2B-S2-200LE
070326
P2B-S2-203L
070349
P2B-S2-203LE
070328
P2B-S2-207L
070351
P2B-S2-207LE
070330
P2B-S2-211L
070353
P2B-S2-211LE
070331
P2B-S2-215L
070354
P2B-S2-215LE
070332
P2B-S2-300L
070355
P2B-S2-300LE
070334
P2B-S2-307L
070357
P2B-S2-307LE
070336
P2B-S2-315L
070359
P2B-S2-315LE
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-15
SELECTIONS
PAGE B12-7
UNIFIED SAF
Shaft
Size
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070272
P2B-S2-106R
070295
P2B-S2-106RE
070273
P2B-S2-107R
070296
P2B-S2-107RE
070274
P2B-S2-108R
070297
P2B-S2-108RE
070276
P2B-S2-111R
070299
P2B-S2-111RE
070277
P2B-S2-112R
070300
P2B-S2-112RE
070278
P2B-S2-115R
070301
P2B-S2-115RE
070279
P2B-S2-200R
070302
P2B-S2-200RE
070280
P2B-S2-203R
070303
P2B-S2-203RE
070282
P2B-S2-207R
070305
P2B-S2-207RE
070284
P2B-S2-211R
070307
P2B-S2-211RE
070285
P2B-S2-215R
070308
P2B-S2-215RE
070286
P2B-S2-300R
070309
P2B-S2-300RE
070288
P2B-S2-307R
070311
P2B-S2-307RE
070290
P2B-S2-315R
070313
P2B-S2-315RE
E-Family Roller
Bearings
Shaft
Size
Inch
Bearing
Specialty Tapered
Products
2-BOLT BASE - INCH
S-2000
S-2000 Pillow Block
UNISPHERE II
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
S-2000 Pillow Block with Type E Dimensions
2-BOLT
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-16
SELECTIONS
PAGE B12-7
Bearing Reference
Guide
2-BOLT
B#
C#
Min
Max
F
Bolt
Dia.
H#
J#
X
Total
Exp.
Set
S/S
Screw Torque
Size In/Lbs
0.75
1.13
3.85
2.55
1.88
1.03
1.50
5/32
0.020
1.80
5/16-18
165
0.75
1.25
4.25
3.01
2.13
0.98
1.69
3/16
0.020
2.08
5/16-18
165
0.88
1.31
4.47
3.44
2.25
1.08
1.76
7/32
0.020
2.30
3/8-16
290
0.88
0.88
1.50
1.63
5.00
5.71
3.50
4.06
2.50
2.75
1.06
1.20
1.88
2.00
1/4
1/4
0.025
0.025
2.60
2.95
3/8-16
3/8-16
290
290
1.07
1.88
6.32
4.61
3.13
1.34
2.25
1/4
0.025
3.47
1/2-13
620
1.19
2.25
7.69
5.50
3.75
1.51
2.50
1/4
0.025
4.05
1/2-13
620
IMPERIAL
1-3/8
2.53
7.37
2.12
5.63
5.88
1/2
1-7/16
1-11/16 2.67
7.88
2.38
6.13
6.38
1/2
1-15/16
2.84
8.87
2.49
6.88
7.12
5/8
2
2-3/16 2.94
9.62
2.56
7.63
7.88
5/8
2-7/16 3.20
10.50
2.87
8.38
8.62
5/8
2-11/16
2-15/16 3.59
12.00
2.99
9.31
9.69
3/4
3
3-7/16 4.01
14.00
3.49
10.81 11.19
7/8
Notes: A And R Dimensions Do Not Include Y Dimension
# Reference Dimension Only
G#
S-2000
D
A
Labyrinth Seal
Non Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071411
EP2B-S2-106L
071422
EP2B-S2-106LE
071412
EP2B-S2-107L
071423
EP2B-S2-107LE
071413
EP2B-S2-111L
071424
EP2B-S2-111LE
071414
EP2B-S2-115L
071425
EP2B-S2-115LE
071415
EP2B-S2-200L
071426
EP2B-S2-200LE
071416
EP2B-S2-203L
071427
EP2B-S2-203LE
071417
EP2B-S2-207L
071428
EP2B-S2-207LE
071418
EP2B-S2-211L
071429
EP2B-S2-211LE
071419
EP2B-S2-215L
071430
EP2B-S2-215LE
071420
EP2B-S2-300L
071431
EP2B-S2-300LE
071421
EP2B-S2-307L
071432
EP2B-S2-307LE
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-17
SELECTIONS
PAGE B12-7
UNIFIED SAF
Shaft
Size
Shaft
Size*
UNISPHERE II
TRIDENT Seal
Non Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
1-3/8
071389
EP2B-S2-106R
071400
EP2B-S2-106RE
22208
1-7/16
071390
EP2B-S2-107R
071401
EP2B-S2-107RE
22209
1-11/16
071391
EP2B-S2-111R
071402
EP2B-S2-111RE
1-15/16
071392
EP2B-S2-115R
071403
EP2B-S2-115RE
22210
2
071393
EP2B-S2-200R
071404
EP2B-S2-200RE
22211
2-3/16
071394
EP2B-S2-203R
071405
EP2B-S2-203RE
22213
2-7/16
071395
EP2B-S2-207R
071406
EP2B-S2-207RE
2-11/16
071396
EP2B-S2-211R
071407
EP2B-S2-211RE
22215
2-15/16
071397
EP2B-S2-215R
071408
EP2B-S2-215RE
3
071398
EP2B-S2-300R
071409
EP2B-S2-300RE
22218
3-7/16
071399
EP2B-S2-307R
071410
EP2B-S2-307RE
*Consult Dodge For Sizes Not Listed
Bearing
Series
E-Family Roller
Bearings
Specialty Tapered
Products
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
Steel S-2000-HD Pillow Block 2-Bolt
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-18
SELECTIONS
PAGE B12-7
Bearing Reference
Guide
SELECTION
D
A
Min
E-Family Roller
Bearings
Max
F
Bolt
Dia.
"X
Total
Exp"
6.00
1/2
1.28
1.13
3.88
2.75
1.88
0.86
1.67
3/16
0.020
1.80
5.75
1/2
0.88
1.25
4.27
3.19
2.13
0.91
1.76
1/4
0.020
2.08
6.36
5/8
0.97
1.31
4.56
3.44
2.25
0.89
1.95
1/4
0.020
2.30
7.00
7.43
5/8
5/8
1.04
1.07
1.50
1.63
5.00
5.60
3.75
4.06
2.50
2.75
0.99
1.17
1.95
2.03
1/4
1/4
0.025
0.025
2.59
2.94
8.40
3/4
1.23
1.88
6.38
4.70
3.25
1.11
2.48
1/4
0.025
3.47
10.75
12.6
7/8
1
1.75
2.40
2.25
2.44
7.50
8.37
5.50
6.00
3.75
4.25
1.43
1.59
2.61
2.91
1/4
5/16
0.025
0.025
4.05
4.50
IMPERIAL
1-3/8
1-7/16
2.53
6.88
2.25
4.69
1-1/2
1-11/16
2.67
7.13
2.37
5.25
1-3/4
1-15/16
2.84
8.38
2.44
5.93
2
2-3/16
2.94
8.88
2.50
6.50
2-7/16
3.00
9.25
2.90
6.81
2-11/16
2-15/16
3.59
10.44
2.91
7.70
3
3-7/16
4.02
13.00
3.41
9.25
3-15/16
4.47
14.25
3.89
10.04
"A" & "R" Dimensions Do Not Include "Y" Dimension
Description
SP2B-S2-106RE
SP2B-S2-107RE
SP2B-S2-108RE
SP2B-S2-111RE
SP2B-S2-112RE
SP2B-S2-115RE
SP2B-S2-200RE
SP2B-S2-203RE
SP2B-S2-207RE
SP2B-S2-211RE
SP2B-S2-215RE
SP2B-S2-300RE
SP2B-S2-307RE
SP2B-S2-315RE
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-5
B12-19
DIMENSIONS
PAGE B12-14
UNIFIED SAF
Shaft
Size
Part No.
071804
071805
071806
071807
071808
071809
071810
071811
071812
071813
071814
071815
071816
071817
Specialty Tapered
Products
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
Dodge Expansion
Description
SP2B-S2-106R
SP2B-S2-107R
SP2B-S2-108R
SP2B-S2-111R
SP2B-S2-112R
SP2B-S2-115R
SP2B-S2-200R
SP2B-S2-203R
SP2B-S2-207R
SP2B-S2-211R
SP2B-S2-215R
SP2B-S2-300R
SP2B-S2-307R
SP2B-S2-315R
S-2000
Part No.
071790
071791
071792
071793
071794
071795
071796
071797
071798
071799
071800
071801
071802
071803
UNISPHERE II
Dodge Non-Expansion
Shaft Size
Bearing Reference
Guide
SELECTION
Steel S-2000-HD Pillow Block 2-Bolt With Type E Dimensions
E-Family Roller
Bearings
1/8-27 NPT
G
F
Specialty Tapered
Products
M
H
D MIN
D MAX
B
S-2000
S
CL
HSG
CL
Y
MAX
HSG
UNISPHERE II
Z
MIN
A
A
R
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
EXPANSION
NON-EXPANSION
SPECIFICATION
PAGE B12-4
PAGE B12-5
B12-20
DIMENSIONS
PAGE B12-14
Bearing Reference
Guide
DIMENSIONS
Steel S-2000-HD Pillow Block 2-BOLT With Type E Dimensions
D
A
Min
E-Family Roller
Bearings
Max
F
Bolt
Dia
X
Total
Exp
Set
Screw
Size
SS
Torque
In/lbs
5.88
1/2
1.22
1.13
3.84
2.55
1.88
1.03
1.50
5/32
0.020
1.80
5/16-18
165
6.50
1/2
1.02
1.25
4.26
3.01
2.13
0.98
1.69
3/16
0.020
2.08
5/16-18
165
7.12
5/8
1.32
1.31
4.47
3.26
2.25
1.08
1.76
7/32
0.020
2.30
3/8-16
290
7.88
5/8
1.45
1.50
5.00
3.50
2.50
1.06
1.88
1/4
0.025
2.60
3/8-16
290
8.62
5/8
1.63
1.63
5.71
3.86
2.75
1.20
2.00
1/4
0.025
2.95
3/8-16
290
9.62
3/4
1.75
1.88
6.32
4.61
3.13
1.34
2.25
1/4
0.025
3.47
1/2-13
620
11.25
7/8
1.94
2.25
7.69
5.50
3.75
1.51
2.50
1/4
0.025
4.05
1/2-13
620
IMPERIAL
1-3/8
2.53
6.88
2.25
4.69
1-7/16
1-11/16
2.67
7.88
2.38
5.70
1-15/16
2.84
8.88
2.44
6.00
2
2-3/16
2.94
9.63
2.50
6.50
2-7/16
3.20 10.25 2.90
6.88
2-11/16
2-15/16
3.59 11.63 2.91
7.88
3
3-7/16
4.01 13.50 3.41
9.38
A & R Dimensions Do Not Include Y Dimension
Description
SEP2B-S2-106RE
SEP2B-S2-107RE
SEP2B-S2-111RE
SEP2B-S2-115RE
SEP2B-S2-200RE
SEP2B-S2-203RE
SEP2B-S2-207RE
SEP2B-S2-211RE
SEP2B-S2-215RE
SEP2B-S2-300RE
SEP2B-S2-307RE
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-21
SELECTIONS
PAGE B12-7
UNIFIED SAF
Shaft
Size
Part No.
071951
071952
071953
071954
071955
071956
071957
071958
071959
071960
071961
Specialty Tapered
Products
1-3/8
1-7/16
1-11/16
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
Dodge Expansion
Description
SEP2B-S2-106R
SEP2B-S2-107R
SEP2B-S2-111R
SEP2B-S2-115R
SEP2B-S2-200R
SEP2B-S2-203R
SEP2B-S2-207R
SEP2B-S2-211R
SEP2B-S2-215R
SEP2B-S2-300R
SEP2B-S2-307R
S-2000
Part No.
071940
071941
071942
071943
071944
071945
071946
071947
071948
071949
071950
UNISPHERE II
Dodge Non-Expansion
Shaft
Size
Bearing Reference
Guide
DIMENSIONS
S-2000 Pillow Block
4-BOLT BASE
E-Family Roller
Bearings
CL
CL
HSG
HSG
A
L
Specialty Tapered
Products
C
1-15/16 THRU 3-15/16"
CONSTRUCTION
E
F BOLT DIA.
NON-EXPANSION
EXPANSION
CL
C
1-15/16 THRU 3-15/16"
CONSTRUCTION
CL
HSG
HSG
S-2000
D MIN
D MAX
B
A
L
UNISPHERE II
4-7/16 THRU 4-15/16"

CONSTRUCTION
4-7/16 THRU 4-15/16"

CONSTRUCTION
EXPANSION
NON-EXPANSION
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-22
SELECTIONS
PAGE B12-7
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
22210
22211
22213
22215
22218
22220
22222
22226
2.84
8.00
2.94
3.20
Bearing Reference
Guide
E
F
Bolt
Dia.
X
Total
Exp.
Min
Max
3.19
6.06
6.44
1.59
1/2
0.81
1.31
4.56
3.44
2.25
.84
2.0
1/4
0.020
2.30
8.88
9.25
3.25
3.38
6.56
6.94
6.94
7.31
1.69
1.75
1/2
1/2
0.81
0.81
1.50
1.63
5.00
5.59
3.75
4.06
2.50
2.75
0.91
1.08
2.03
2.13
1/4
1/4
0.025
0.025
2.60
2.95
3.59
10.44
3.75
7.94
8.31
1.88
5/8
0.94
1.88
6.44
4.70
3.25
1.09
2.50
1/4
0.025
3.47
4.02
4.47
6.53
6.91
13.00
15.25
16.50
18.63
4.13
4.50
4.75
5.38
9.38
12.13
13.00
15.00
10.63
12.88
14.00
16.00
2.00
2.25
2.50
2.75
3/4
3/4
3/4
7/8
1.50
1.25
1.38
1.50
2.25
2.44
2.75
3.00
7.56
8.44
9.63
11.13
5.50
6.00
6.45
7.45
3.75
4.25
4.75
5.50
1.44
1.64
3.08
3.27
2.58
2.83
3.45
3.64
1/4
5/16
3/8
3/8
0.025
0.025
N/A
N/A
4.05
4.50
N/A
N/A
IMPERIAL
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
D
A
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070397
P4B-S2-115L
070415
P4B-S2-115LE
070398
P4B-S2-200L
070416
P4B-S2-200LE
070399
P4B-S2-203L
070417
P4B-S2-203LE
070401
P4B-S2-207L
070419
P4B-S2-207LE
070403
P4B-S2-211L
070421
P4B-S2-211LE
070404
P4B-S2-215L
070422
P4B-S2-215LE
070405
P4B-S2-300L
070423
P4B-S2-300LE
070407
P4B-S2-307L
070425
P4B-S2-307LE
070409
P4B-S2-315L
070427
P4B-S2-315LE
070411
P4B-S2-407L
070429
P4B-S2-407LE
070413
P4B-S2-415L
070431
P4B-S2-415LE
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-23
SELECTIONS
PAGE B12-7
UNIFIED SAF
Shaft
Size
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070361
P4B-S2-115R
070379
P4B-S2-115RE
070362
P4B-S2-200R
070380
P4B-S2-200RE
070363
P4B-S2-203R
070381
P4B-S2-203RE
070365
P4B-S2-207R
070383
P4B-S2-207RE
070367
P4B-S2-211R
070385
P4B-S2-211RE
070368
P4B-S2-215R
070386
P4B-S2-215RE
070369
P4B-S2-300R
070387
P4B-S2-300RE
070371
P4B-S2-307R
070389
P4B-S2-307RE
070373
P4B-S2-315R
070391
P4B-S2-315RE
070375
P4B-S2-407R
070393
P4B-S2-407RE
070377
P4B-S2-415R
070395
P4B-S2-415RE
E-Family Roller
Bearings
Shaft
Size
Inch
Bearing
Specialty Tapered
Products
4-BOLT BASE
S-2000
S-2000 Pillow Block
UNISPHERE II
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
4-BOLT
E-Family Roller
Bearings
CL HSG
X
W
Y
MAX
CL HSG
W
Z
MIN
A
A
L
Specialty Tapered
Products
1/8-27 NPT
G
2-7/16 THRU 3-15/16"

CONSTRUCTION
2-7/16 THRU 3-15/16"

CONSTRUCTION
EXPANSION
NON-EXPANSION
S
S-2000
X
W
CL HSG
CL HSG
D MIN
D MAX
A
L
UNISPHERE II
4-7/16 THRU 4-15/16"

CONSTRUCTION
4-7/16 THRU 4-15/16"

CONSTRUCTION
EXPANSION
NON-EXPANSION
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-24
SELECTIONS
PAGE B12-7
Bearing Reference
Guide
TRIDENT Seal
Non Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
22213
2-7/16
071433
EP4B-S2-207R
071441
EP4B-S2-207RE
2-11/16
071434
EP4B-S2-211R
071442
EP4B-S2-211RE
22215
2-15/16
071435
EP4B-S2-215R
071443
EP4B-S2-215RE
3
071436
EP4B-S2-300R
071444
EP4B-S2-300RE
22218
3-7/16
071437
EP4B-S2-307R
071445
EP4B-S2-307RE
22220
3-15/16
071438
EP4B-S2-315R
071446
EP4B-S2-315RE
22222
4-7/16
071439
EP4B-S2-407R
071447
EP4B-S2-407RE
22226
4-15/16
071440
EP4B-S2-415R
071448
EP4B-S2-415RE
Bearing
Series
D
A
B#
C#
Min
Max
G#
H#
J#
X
Total
Exp.
Set
S/S
Screw Torque
Size In/Lbs
5/8
0.87
1.63
5.72
4.06
2.75
1.20
2.00
1/4
0.025
2.94
3/8
290
5/8
1.00
1.88
6.33
4.61
3.13
1.34
2.25
1/4
0.025
3.47
1/2
620
3/4
3/4
3/4
7/8
1.13
1.13
1.13
1.25
2.25
2.44
2.75
3.00
7.69
8.70
9.67
11.16
5.50
6.00
6.45
7.45
3.75
4.25
4.75
5.50
1.51
1.34
3.08
3.29
2.50
3.13
3.38
3.62
1/4
5/16
3/8
3/8
0.025
0.025
N/A
N/A
4.05
4.50
N/A
N/A
1/2
5/8
5/8
5/8
620
1325
1325
1325
IMPERIAL
UNISPHERE II
2-7/16 3.20 10.50 3.49

8.31
8.69
1.87
2-11/16
2-15/16 3.59 12.00 4.00
9.18
9.82
2.13
3
3-7/16 4.01 13.50 4.49 10.75 11.25 2.37
3-15/16 4.47 15.25 4.50 12.25 12.75 2.25
4-7/16 6.53 16.63 4.63 13.25 13.75 2.50
4-15/16 6.91 18.50 5.13 15.25 15.75 2.87
F
Bolt
Dia.
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-25
SELECTIONS
PAGE B12-7
UNIFIED SAF
Shaft
Size
Labyrinth Seal
Non Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071449
EP4B-S2-207L
071457
EP4B-S2-207LE
071450
EP4B-S2-211L
071458
EP4B-S2-211LE
071451
EP4B-S2-215L
071459
EP4B-S2-215LE
071452
EP4B-S2-300L
071460
EP4B-S2-300LE
071453
EP4B-S2-307L
071461
EP4B-S2-307LE
071454
EP4B-S2-315L
071462
EP4B-S2-315LE
071455
EP4B-S2-407L
071463
EP4B-S2-407LE
071456
EP4B-S2-415L
071464
EP4B-S2-415LE
Shaft
Size*
E-Family Roller
Bearings
4-BOLT
Specialty Tapered
Products
S-2000
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-26
SELECTIONS
PAGE B12-7
Bearing Reference
Guide
DIMENSIONS
D
Min
E-Family Roller
Bearings
F
Bolt
Dia.
X
Total
Exp
7.63
1.75
1/2
1.06
1.63
5.61
4.06
2.75
1.19
2.90
1/4
0.025
2.94
9.10
1.88
5/8
1.43
1.88
6.44
4.70
3.00
1.14
2.46
1/4
0.025
3.47
10.88
13.38
14.5
15.88
2.00
2.25
2.50
2.75
3/4
3/4
3/4
7/8
1.88
2.13
2.19
1.37
2.25
2.44
2.75
3.00
7.56
8.70
9.67
11.12
5.50
6.00
6.45
7.45
3.75
4.25
4.75
5.50
1.48
1.25
2.87
3.35
2.54
3.22
3.66
3.56
1/4
5/16
3/8
3/8
0.025
0.025
0.036
0.036
4.05
4.50
5.00
5.84
Max
IMPERIAL
UNISPHERE II
2-7/16
3.20
9.25
3.00
6.88
2-11/16
2-15/16
3.59
10.44
3.13
7.60
3
3-7/16
4.02
12.30
3.75
8.88
3-15/16
4.47
14.88
4.31
10.88
4-7/16
6.53
16.13
4.75
11.88
4-15/16
6.91
17.50
5.03
15.13
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-27
SELECTIONS
PAGE B12-7
UNIFIED SAF
Shaft
Size
Description
SP4B-S2-207RE
SP4B-S2-211RE
SP4B-S2-215RE
SP4B-S2-300RE
SP4B-S2-307RE
SP4B-S2-315RE
SP4B-S2-407RE
SP4B-S2-415RE
Specialty Tapered
Products
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
Dodge Expansion
Dodge Part No.
071832
071833
071834
071835
071836
071837
071838
071839
S-2000
Dodge Non-Expansion
Dodge Part No.
Description
071821
SP4B-S2-207R
071822
SP4B-S2-211R
071823
SP4B-S2-215R
071824
SP4B-S2-300R
071825
SP4B-S2-307R
071826
SP4B-S2-315R
071827
SP4B-S2-407R
071828
SP4B-S2-415R
Shaft
Size
Bearing Reference
Guide
DIMENSIONS
Steel S2000-HD Pillow Block 4-Bolt With Type E Dimensions
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-28
SELECTIONS
PAGE B12-7
Bearing Reference
Guide
DIMENSIONS
Steel S2000-HD Pillow Block 4-Bolt With Type E Dimensions
Shaft
Size
E-Family Roller
Bearings
D
Max
F
Bolt
Dia
3.25
7.13
8.75
1.88
5/8
1.57
1.63
3.38
8.00
9.60
2.12
5/8
1.56
1.88
3.75
4.31
4.75
5.04
9.25
10.88
11.88
15.13
11.25
13.88
14.50
15.88
2.38
2.25
2.50
2.88
3/4
3/4
3/4
7/8
1.88
2.13
2.19
1.38
2.25
2.44
2.75
3.00
X
Total
Exp
Set
Screw
Size
S/S
Torque
In/Lbs
2.75
1.20
2.00
1/4
0.025
2.94
3/8
290
3.13
1.34
2.25
1/4
0.025
3.47
1/2
620
3.75
4.25
4.75
5.50
1.51
1.25
2.87
3.29
2.50
3.22
3.66
3.62
1/4
5/16
3/8
3/8
0.025
0.025
0.036
N/A
4.05
4.50
5.00
N/A
1/2
5/8
5/8
5/8
620
1325
1325
1325
IMPERIAL
2-7/16
5.71
3.86
2-11/16
2-15/16
6.32
4.61
3
3-7/16
7.69
5.50
3-15/16
8.70
6.00
4-7/16
9.67
6.45
4-15/16
11.16
7.45
D
Min
S-2000
2-7/16
3.20
10.25
2-11/16
2-15/16
3.59
10.83
3
3-7/16
4.01
13.63
3-15/16
4.47
14.88
4-7/16
6.53
16.13
4-15/16
6.91
17.50
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-29
SELECTIONS
PAGE B12-7
UNIFIED SAF
Shaft
Size
Description
SEP4B-S2-207RE
SEP4B-S2-211RE
SEP4B-S2-215RE
SEP4B-S2-300RE
SEP4B-S2-307RE
SEP4B-S2-315RE
SEP4B-S2-407RE
SEP4B-S2-415RE
UNISPHERE II
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
Dodge Expansion
Dodge Part No.
071970
071971
071972
071973
071974
071975
071976
071977
Specialty Tapered
Products
Dodge Non-Expansion
Dodge Part No.
Description
071962
SEP4B-S2-207R
071963
SEP4B-S2-211R
071964
SEP4B-S2-215R
071965
SEP4B-S2-300R
071966
SEP4B-S2-307R
071967
SEP4B-S2-315R
071968
SEP4B-S2-407R
071969
SEP4B-S2-415R
Shaft Size
Bearing Reference
Guide
DIMENSIONS
S-2000 Flange Bearing - Round
DD
DD
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
D
1-11/16" - 3"
CONSTRUCTION
1-3/8" THRU 1-1/2"

CONSTRUCTION
C
E
Y
MAX
UNISPHERE II
Z
MIN
A
IMPERIAL
H
EXPANSION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
NON-EXPANSION
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-30
SELECTIONS
PAGE B12-7
22208
22209
22210
22211
22213
22215
Shaft
Size
Inch
1 - 3/8
1 - 7/16
1 - 1/2
1 - 11/16
1 - 3/4
1 - 15/16
2
2 - 3/16
2-7/16
2-11/16
2-15/16
3
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070436
F3R-S2-106R
070470
F3R-S2-106RE
070437
F3R-S2-107R
070471
F3R-S2-107RE
070438
F3R-S2-108R
070472
F3R-S2-108RE
070440
F4R-S2-111R
070474
F4R-S2-111RE
070441
F4R-S2-112R
070475
F4R-S2-112RE
070442
F4R-S2-115R
070476
F4R-S2-115RE
070443
F4R-S2-200R
070477
F4R-S2-200RE
070444
F4R-S2-203R
070478
F4R-S2-203RE
070446
F4R-S2-207R
070480
F4R-S2-207RE
070448
F4R-S2-211R
070482
F4R-S2-211RE
070449
F4R-S2-215R
070483
F4R-S2-215RE
070450
F4R-S2-300R
070484
F4R-S2-300RE
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070491
F3R-S2-106L
070523
F3R-S2-106LE
070492
F3R-S2-107L
070524
F3R-S2-107LE
070493
F3R-S2-108L
070525
F3R-S2-108LE
070495
F4R-S2-111L
070527
F4R-S2-111LE
070496
F4R-S2-112L
070528
F4R-S2-112LE
070497
F4R-S2-115L
070529
F4R-S2-115LE
070498
F4R-S2-200L
070530
F4R-S2-200LE
070499
F4R-S2-203L
070531
F4R-S2-203LE
070501
F4R-S2-207L
070533
F4R-S2-207LE
070503
F4R-S2-211L
070535
F4R-S2-211LE
070504
F4R-S2-215L
070536
F4R-S2-215LE
070505
F4R-S2-300L
070537
F4R-S2-300LE
DD
F
Bolt
Dia.
X
Total
Exp.
2.53
5.88
2.77
3.53
5.00
1.80
1/2*
0.50
3.84
2.75
0.23
3/16
0.020
1.80
2.67
6.38
2.97
3.89
5.50
1.89
1/2**
0.50
4.34
3.19
0.30
1/4
0.020
2.08
2.84
6.69
3.14
4.06
5.75
1.92
1/2**
0.56
4.59
3.44
0.30
1/4
0.020
2.30
2 - 3/16
2.94
7.38
3.23
4.50
6.38
2.05
5/8**
0.56
4.98
3.75
0.30
1/4
0.025
2.60
2-7/16
3.20
7.75
3.50
4.77
6.75
2.38
5/8**
0.77
5.50
406
0.30
1/4
0.025
2.95
3.59
9.25
3.89
5.56
7.88
2.39
3/4**
0.88
6.36
4.70
0.30
1/4
0.025
3.47
Shaft
Size
Bearing Reference
Guide
Bearing
E-Family Roller
Bearings
S-2000 Flange Bearing - Round
Specialty Tapered
Products
DIMENSIONS
1 - 3/8
1 - 7/16
1 - 11/16
1 - 3/4
1 - 15/16
2
S-2000
1 - 1/2
3
* 3 Equally spaced bolt holes
IMPERIAL
** 4 Equally spaced bolt holes
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-31
SELECTIONS
PAGE B12-7
UNIFIED SAF
2-15/16
UNISPHERE II
2-11/16
Bearing Reference
Guide
DIMENSIONS
S-2000 Flange Bearing - Square
B
E-Family Roller
Bearings
N
Specialty Tapered
Products
F
S-2000
C
P
C
Y
MAX
X
UNISPHERE II
Z
MIN
J
IMPERIAL
EXPANSION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
J L
H
NON-EXPANSION
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-32
SELECTIONS
PAGE B12-7
22211
22213
22215
22218
22220
Shaft
Size
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
F
Bolt
Dia
X
Total
Exp.
2.53
4.75
2.77
3.53
1/2
0.99
0.50
3.81
5.00
2.75
2.48
0.23
3/16
0.020
1.80
2.67
5.13
2.97
3.89
1/2
1.08
0.50
4.41
5.50
3.19
2.78
0.30
1/4
0.020
2.08
2.84
5.30
3.16
4.06
1/2
1.23
0.56
4.97
5.75
3.44
2.91
0.31
1/4
0.020
2.30
2.94
3.20
5.88
6.13
3.25
3.52
4.52
4.78
5/8
5/8
1.20
1.14
0.56
0.64
5.02
5.63
6.38
6.75
3.75
4.06
3.09
3.41
0.31
0.31
1/4
1/4
0.025
0.025
2.60
2.95
3.59
7.19
3.91
5.56
3/4
1.52
0.75
6.50
7.88
4.70
3.84
0.31
1/4
0.025
3.47
4.00
4.47
8.25
9.25
4.31
4.84
6.72
7.61
3/4
7/8
1.44
1.55
0.94
1.06
7.48
8.22
9.50
10.75
5.50
6.00
4.33
4.70
0.31
0.38
1/4
5/16
0.025
0.025
4.05
4.50
Bearing Reference
Guide
E-Family Roller
Bearings
22210
Specialty Tapered
Products
22209
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070600
F4S-S2-106L
070853
F4S-S2-106LE
070601
F4S-S2-107L
070854
F4S-S2-107LE
070602
F4S-S2-108L
070855
F4S-S2-108LE
070604
F4S-S2-111L
070857
F4S-S2-111LE
070605
F4S-S2-112L
070858
F4S-S2-112LE
070606
F4S-S2-115L
070859
F4S-S2-115LE
070607
F4S-S2-200L
070860
F4S-S2-200LE
070608
F4S-S2-203L
070861
F4S-S2-203LE
070610
F4S-S2-207L
070863
F4S-S2-207LE
070612
F4S-S2-211L
070865
F4S-S2-211LE
070613
F4S-S2-215L
070866
F4S-S2-215LE
070614
F4S-S2-300L
070867
F4S-S2-300LE
070616
F4S-S2-307L
070869
F4S-S2-307LE
070618
F4S-S2-315L
070871
F4S-S2-315LE
IMPERIAL
22208
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070541
F4S-S2-106R
070564
F4S-S2-106RE
070542
F4S-S2-107R
070565
F4S-S2-107RE
070543
F4S-S2-108R
070566
F4S-S2-108RE
070545
F4S-S2-111R
070568
F4S-S2-111RE
070546
F4S-S2-112R
070569
F4S-S2-112RE
070547
F4S-S2-115R
070570
F4S-S2-115RE
070548
F4S-S2-200R
070571
F4S-S2-200RE
070549
F4S-S2-203R
070572
F4S-S2-203RE
070551
F4S-S2-207R
070574
F4S-S2-207RE
070553
F4S-S2-211R
070576
F4S-S2-211RE
070554
F4S-S2-215R
070577
F4S-S2-215RE
070555
F4S-S2-300R
070578
F4S-S2-300RE
070557
F4S-S2-307R
070580
F4S-S2-307RE
070559
F4S-S2-315R
070582
F4S-S2-315RE
Shaft Size
Inch
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-33
SELECTIONS
PAGE B12-7
UNIFIED SAF
Bearing
S-2000
S-2000 Flange Bearing - Square
UNISPHERE II
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
S-2000 Flange Bearing - Square with Type E Dimensions
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-34
SELECTIONS
PAGE B12-7
B#
C#
DD
F
Bolt
Dia.
H#
J#
X
Total
Exp.
Set
Screw
Size
S/S
Torque
In/Lbs
0.57
1.06
3.88
2.55
2.34
0.53
5/32
0.020
1.80
5/16-18
165
0.53
1.19
4.18
3.01
2.51
0.84
3/16
0.020
2.08
5/16-18
165
0.65
1.18
4.36
3.44
2.60
0.78
7/32
0.020
2.30
3/8-16
290
0.60
0.83
1.38
1.50
4.88
5.81
3.50
4.06
2.88
3.32
0.93
0.98
1/4
1/4
0.025
0.025
2.60
2.95
3/8-16
3/8-16
290
290
0.88
1.61
6.30
4.61
3.58
1.09
1/4
0.025
3.47
1/2-13
620
0.96
1.00
1.39
1.87
2.12
2.43
7.44
8.27
9.13
5.50
6.00
6.45
4.15
4.58
5.01
1.24
2.02
0.56
1/4
5/16
3/8
0.025
0.025
N/A
4.05
4.50
N/A
1/2-13
5/8-11
5/8-11
620
1325
1325
Bearing Reference
Guide
E-Family Roller
Bearings
IMPERIAL
1-3/8
2.53
4.62
3.06
3.50
4.95
1/2
1-7/16
1-11/16 2.67
5.37
3.50
4.13
5.83
1/2
1-15/16
2.84
5.62
3.63
4.37
6.19
1/2
2
2-3/16
2.94
6.25
3.87
4.87
6.89
5/8
2-7/16
3.20
6.88
4.19
5.37
7.60
5/8
2-11/16
2-15/16 3.59
7.76
4.69
6.00
8.49
3/4
3
3-7/16
4.01
9.25
5.25
7.00
9.90
3/4
3-15/16 4.48
10.25
6.50
7.75
10.96
7/8
4-7/16
6.53
10.88
7.10
8.75
12.37
7/8
Note(S): P Dimension Is For Non-Expansion Only

A And P Dimensions Do Not Include Y Dimension
# - Reference Dimensions Only
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-35
SELECTIONS
PAGE B12-7
UNIFIED SAF
Shaft
Size
Labyrinth Seal
Non Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071495
EF4B-S2-106L
071508
EF4B-S2-106LE
071496
EF4B-S2-107L
071509
EF4B-S2-107LE
071497
EF4B-S2-111L
071510
EF4B-S2-111LE
071498
EF4B-S2-115L
071511
EF4B-S2-115LE
071499
EF4B-S2-200L
071512
EF4B-S2-200LE
071500
EF4B-S2-203L
071513
EF4B-S2-203LE
071501
EF4B-S2-207L
071514
EF4B-S2-207LE
071502
EF4B-S2-211L
071515
EF4B-S2-211LE
071503
EF4B-S2-215L
071516
EF4B-S2-215LE
071504
EF4B-S2-300L
071517
EF4B-S2-300LE
071505
EF4B-S2-307L
071518
EF4B-S2-307LE
071506
EF4B-S2-315L
071519
EF4B-S2-315LE
071507
EF4B-S2-407L
071520
EF4B-S2-407LE
Shaft
Size*
Specialty Tapered
Products
TRIDENT Seal
Non Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
1-3/8
071469
EF4B-S2-106R
071482
EF4B-S2-106RE
22208
1-7/16
071470
EF4B-S2-107R
071483
EF4B-S2-107RE
22209
1-11/16
071471
EF4B-S2-111R
071484
EF4B-S2-111RE
1-15/16
071472
EF4B-S2-115R
071485
EF4B-S2-115RE
22210
2
071473
EF4B-S2-200R
071486
EF4B-S2-200RE
22211
2-3/16
071474
EF4B-S2-203R
071487
EF4B-S2-203RE
2-7/16
071475
EF4B-S2-207R
071488
EF4B-S2-207RE
22213
2-11/16
071476
EF4B-S2-211R
071489
EF4B-S2-211RE
2-15/16
071477
EF4B-S2-215R
071490
EF4B-S2-215RE
22215
3
071478
EF4B-S2-300R
071491
EF4B-S2-300RE
22218
3-7/16
071479
EF4B-S2-307R
071492
EF4B-S2-307RE
22220
3-15/16
071480
EF4B-S2-315R
071493
EF4B-S2-315RE
22222
4-7/16
071481
EF4B-S2-407R
071494
EF4B-S2-407RE
Bearing
Series
S-2000
S-2000 Flange Bearing - Square with Type E Dimensions
UNISPHERE II
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
Steel S-2000-HD Flange 4-Bolt
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-36
SELECTIONS
PAGE B12-7
Bearing Reference
Guide
DIMENSIONS
Steel S-2000-HD Flange 4-Bolt
Shaft
Size
E-Family Roller
Bearings
Specialty Tapered
Products
F
Bolt
Dia.
X
Total
Exp
3.54
1/2
0.76
0.88
3.70
5.00
2.75
2.25
0.24
3/16
0.02
1.80
3.89
1/2
0.77
0.88
4.41
5.50
3.19
2.62
0.20
1/4
0.02
2.08
4.07
1/2
0.91
0.91
4.66
5.75
3.44
2.75
0.32
1/4
0.02
2.30
4.51
4.77
5/8
5/8
0.83
0.72
0.75
1.00
5.03
5.63
6.38
6.75
3.75
4.06
2.93
3.23
0.22
0.14
1/4
1/4
0.02
0.025
2.59
2.94
5.57
3/4
1.04
1.06
6.51
7.88
4.70
3.75
0.28
1/4
0.025
3.47
6.72
7.60
3/4
1
0.78
0.85
1.28
1.50
7.49
8.22
9.50
10.75
5.50
6.00
4.17
4.68
0.11
0.36
1/4
5/32
0.025
0.025
4.05
4.50
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-37
SELECTIONS
PAGE B12-7
UNIFIED SAF
IMPERIAL
1-3/8
1-7/16
2.53
4.62
2.77
1-1/2
1-11/16
2.67
5.37
2.87
1-3/4
1-15/16
2.84
5.18
3.16
2
2-3/16
2.94
5.87
3.16
2-7/16
3.20
6.18
3.34
2-11/16
2-15/16
3.59
7.18
3.87
3
3-7/16
4.00
8.37
4.11
3-15/16
4.48
9.49
4.84
P Dimension Is For Non-Expansion Only
A & P Dimensions Do Not Include Y Dimension
Description
SF4S-S2-106RE
SF4S-S2-107RE
SF4S-S2-108RE
SF4S-S2-111RE
SF4S-S2-112RE
SF4S-S2-115RE
SF4S-S2-200RE
SF4S-S2-203RE
SF4S-S2-207RE
SF4S-S2-211RE
SF4S-S2-215RE
SF4S-S2-300RE
SF4S-S2-307RE
SF4S-S2-315RE
S-2000
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
Dodge Expansion
Dodge Part No.
072400
072401
072402
072403
072404
072405
072406
072407
072408
072409
072410
072411
072412
072413
UNISPHERE II
Dodge Non-Expansion
Dodge Part No.
Description
072386
SF4S-S2-106R
072387
SF4S-S2-107R
072388
SF4S-S2-108R
072389
SF4S-S2-111R
072390
SF4S-S2-112R
072391
SF4S-S2-115R
072392
SF4S-S2-200R
072393
SF4S-S2-203R
072394
SF4S-S2-207R
072395
SF4S-S2-211R
072396
SF4S-S2-215R
072397
SF4S-S2-300R
072398
SF4S-S2-307R
072399
SF4S-S2-315R
Shaft Size
Bearing Reference
Guide
DIMENSIONS
S-2000 Piloted Flange
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-38
SELECTIONS
PAGE B12-7
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16 **
4-15/16 **
22208
22209
22210
22211
22213
22215
22218
22220
22222
22226
Bearing Reference
Guide
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070644
FC-S2-106R
070671
FC-S2-106RE
070645
FC-S2-107R
070672
FC-S2-107RE
070646
FC-S2-108R
070673
FC-S2-108RE
070648
FC-S2-111R
070675
FC-S2-111RE
070649
FC-S2-112R
070676
FC-S2-112RE
070650
FC-S2-115R
070677
FC-S2-115RE
070651
FC-S2-200R
070678
FC-S2-200RE
070652
FC-S2-203R
070679
FC-S2-203RE
070654
FC-S2-207R
070681
FC-S2-207RE
070656
FC-S2-211R
070683
FC-S2-211RE
070657
FC-S2-215R
070684
FC-S2-215RE
070658
FC-S2-300R
070685
FC-S2-300RE
070660
FC-S2-307R
070687
FC-S2-307RE
070662
FC-S2-315R
070689
FC-S2-315RE
070664
FC-S2-407R
070691
FC-S2-407RE
070666
FC-S2-415R
070693
FC-S2-415RE
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070698
FC-S2-106L
070725
FC-S2-106LE
070699
FC-S2-107L
070726
FC-S2-107LE
070700
FC-S2-108L
070727
FC-S2-108LE
070702
FC-S2-111L
070729
FC-S2-111LE
070703
FC-S2-112L
070730
FC-S2-112LE
070704
FC-S2-115L
070731
FC-S2-115LE
070705
FC-S2-200L
070732
FC-S2-200LE
070706
FC-S2-203L
070733
FC-S2-203LE
070708
FC-S2-207L
070735
FC-S2-207LE
070710
FC-S2-211L
070737
FC-S2-211LE
070711
FC-S2-215L
070738
FC-S2-215LE
070712
FC-S2-300L
070739
FC-S2-300LE
070714
FC-S2-307L
070741
FC-S2-307LE
070716
FC-S2-315L
070743
FC-S2-315LE
070718
FC-S2-407L
070745
FC-S2-407LE
070720
FC-S2-415L
070747
FC-S2-415LE
DD
F
Bolt
Dia.
*K
X
Total
Exp.
2.53
5.25
1.84
3.09
4.38
0.75
3/8
1.31
0.50
3.63
2.75
3/8-16
2.55
1.22
1.22
3/16
0.020
1.80
2.67
6.13
1.91
3.63
5.13
0.88
7/16
1.45
0.50
4.25
3.19
7/16-14
2.72
1.22
1.27
1/4
0.020
2.08
2.84
6.38
2.00
3.80
5.38
0.88
7/16
1.59
0.56
4.50
3.44
7/16-14
2.86
1.25
1.27
1/4
0.020
2.30
2-3/16
2.94
7.13
2.19
4.25
6.00
1.00
1/2
1.56
0.56
5.00
3.75
1/2-13
2.98
1.38
1.42
1/4
0.025
2.59
2-7/16
3.20
7.63
2.50
4.59
6.50
1.00
1/2
1.64
0.63
5.50
4.06
1/2-13
3.20
1.56
1.56
1/4
0.025
2.94
3.59
8.75
2.63
5.30
7.50
1.25
5/8
2.03
0.75
6.38
4.70
5/8-11
3.64
1.56
1.63
1/4
0.025
3.47
Shaft
Size
1-3/8
1-7/16
E-Family Roller
Bearings
Shaft
Size
Inch
Bearing
Specialty Tapered
Products
S-2000 Piloted Flange
S-2000
DIMENSIONS
1-3/4
1-15/16
2
2-11/16
2-15/16
3
3-7/16
4.00
10.25
3.00
6.09
8.63
1.27
3/4
2.36
0.94
7.38
5.50
3/4-10
3.88
1.64
1.52
1/4
0.025
4.05
3-15/16
4.47
10.88
3.50
6.63
9.38
1.47
3/4
2.66
1.13
8.13
6.00
3/4-10
4.56
1-31
1.91
5/16
0.025
4.50
4-7/16
6.53
13.58
4.00
5.88
11.75
1.45
3/4**
3.53
1.00
10.25
6.45
3/4-10
5.50
3.00
1.98
3/8
N/A
N/A
4-15/16
6.91
14.84
4.38
6.38
12.75
1.70
7/8**
3.44
1.25
11.00
7.45
7/8-9
5.86
3.47
2.42
3/8
N/A
N/A
FEATURES/BENEFITS
PAGE B12-2
IMPERIAL
** Housing utilize 6 bolts equally spaced

* +.000/-.002
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-39
SELECTIONS
PAGE B12-7
UNIFIED SAF
1-11/16
UNISPHERE II
1-1/2
Bearing Reference
Guide
DIMENSIONS
S-2000 Piloted Flange with Type E Dimensions
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-40
SELECTIONS
PAGE B12-7
1-3/8
1-7/16
1-11/16
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
22208
22209
22210
22211
22213
22215
22218
22220
22222
22226
B#
C#
DD
E#
F
Bolt
Dia.
H#
K ##
Q#
X
Total
Exp.
Set
S/S
Screw Torque
Size In/Lbs
3.09
4.38
0.75
3/8
1.31
0.50
3.625
2.55
3/8-16
2.53
1.22
1.22
3/16
0.020
1.80
5/16
165
3.63
5.13
0.88
7/16
1.45
0.50
4.250
3.01 7/16-14 2.72
1.22
1.26
1/4
0.020
2.08
5/16
165
3.80
5.38
0.88
7/16
1.59
0.56
4.500
3.44 7/16-14 2.86
1.25
1.26
1/4
0.020
2.30
3/8
290
4.25
4.59
6.00
6.50
1.00
1.00
1/2
1/2
1.56
1.64
0.56
0.63
5.000
5.500
3.50
4.06
1/2-13
1/2-13
2.98
3.20
1.38
1.56
1.42
1.56
1/4
1/4
0.025
0.025
2.59
2.94
3/8
3/8
290
290
5.30
7.50
1.25
5/8
2.03
0.75
6.375
4.61
5/8-11
3.64
1.56
1.63
1/4
0.025
3.47
1/2
620
6.09 8.63 1.26

3/4
2.36 0.94 7.375 5.50 3/4-10
6.63 9.38 1.47
3/4
2.66 1.13 8.125 6.00 3/4-10
5.88 11.75 1.45 3/4 ** 3.00 0.94 10.250 6.45 3/4-10
6.38 12.75 1.70 7/8 ** 2.97 1.25 11.000 7.45 7/8-9
Note(S):
P And G Dimensions Are For Non-Expansion Only
3.88
4.56
5.63
5.95
1.65
1.81
3.53
3.94
1.52
1.91
2.63
3.01
1/4
5/16
3/8
3/8
0.025
0.025
N/A
N/A
4.05
4.50
N/A
N/A
1/2
5/8
5/8
5/8
620
1325
1325
1325
Bearing Reference
Guide
IMPERIAL
1-3/8
2.53 5.25 1.84
1-7/16
1-11/16 2.67 6.13 1.91
1-15/16
2.84 6.38 2.00
2
2-3/16 2.94 7.13 2.19
2-7/16 3.20 7.63 2.50
2-11/16
2-15/16 3.59 8.75 2.63
3
3-7/16 4.01 10.25 3.00
3-15/16 4.47 10.88 3.50
4-7/16 6.53 13.50 4.58
4-15/16 6.91 14.75 4.88
## +0.000
-0.002
#Reference Dimension Only
Labyrinth Seal
Non Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070698
FC-S2-106L
070725
FC-S2-106LE
070699
FC-S2-107L
070726
FC-S2-107LE
070702
FC-S2-111L
070729
FC-S2-111LE
070704
FC-S2-115L
070731
FC-S2-115LE
070705
FC-S2-200L
070732
FC-S2-200LE
070706
FC-S2-203L
070733
FC-S2-203LE
070708
FC-S2-207L
070735
FC-S2-207LE
070710
FC-S2-211L
070737
FC-S2-211LE
070711
FC-S2-215L
070738
FC-S2-215LE
070712
FC-S2-300L
070739
FC-S2-300LE
070714
FC-S2-307L
070741
FC-S2-307LE
070716
FC-S2-315L
070743
FC-S2-315LE
071525
EFC-S2-407L
071527
EFC-S2-407LE
071526
EFC-S2-415L
071528
EFC-S2-415LE
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-41
SELECTIONS
PAGE B12-7
UNIFIED SAF
Shaft
Size
TRIDENT SEAL
Non Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070644
FC-S2-106R
070671
FC-S2-106RE
070645
FC-S2-107R
070672
FC-S2-107RE
070648
FC-S2-111R
070675
FC-S2-111RE
070650
FC-S2-115R
070677
FC-S2-115RE
070651
FC-S2-200R
070678
FC-S2-200RE
070652
FC-S2-203R
070679
FC-S2-203RE
070654
FC-S2-207R
070681
FC-S2-207RE
070656
FC-S2-211R
070683
FC-S2-211RE
070657
FC-S2-215R
070684
FC-S2-215RE
070658
FC-S2-300R
070685
FC-S2-300RE
070660
FC-S2-307R
070687
FC-S2-307RE
070662
FC-S2-315R
070689
FC-S2-315RE
071521
EFC-S2-407R
071523
EFC-S2-407RE
071522
EFC-S2-415R
071524
EFC-S2-415RE
E-Family Roller
Bearings
Shaft
Size*
Specialty Tapered
Products
Bearing
Series
S-2000
S-2000 Piloted Flange with Type E Dimensions
UNISPHERE II
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
S-2000 Wide Slot Take-Up
1-3/8 THRU 2-3/16 INCH
E-Family Roller
Bearings
Specialty Tapered
Products
N M
G
H
E
B
S-2000
Y
MAX
UNISPHERE II
IMPERIAL
T
NON-EXPANSION
EXPANSION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
Z
MIN
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-42
SELECTIONS
PAGE B12-7
Bearing Reference
Guide
DIMENSIONS
1-3/8 THRU 2-3/16 INCH
22210
22211
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
CP-408
2.53
5.06
0.53
2.75
3.19
7/8
0.69
0.63
2.44
1.44
2.67
5.94
0.69
3.13
3.81
1-1/8
0.94
0.75
3.31
1.94
2.84
6.19
0.69
3.63
3.94
1-1/8
0.94
0.75
3.31
1.94
2.94
7.06
0.81
3.63
4.63
1-3/8
0.94
1.25
3.88
2.25
X
Total Exp
2.75
3.50
4.13
2.73
1.70
2.06
3/16
0.020
1.80
3.19
4.00
4.75
2.83
1.81
2.03
1/4
0.020
2.08
3.44
4.00
4.75
2.94
1.94
2.00
1/4
0.020
2.30
3.75
4.50
5.25
3.09
1.98
2.22
1/4
0.020
2.59
E-Family Roller
Bearings
IMPERIAL
Shaft
Size
CP-400
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-43
SELECTIONS
PAGE B12-7
UNIFIED SAF
Shaft
Size
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
CP-400
Part Name
WSTU-S2-106RE
WSTU-S2-107RE
WSTU-S2-108RE
WSTU-S2-111RE
WSTU-S2-112RE
WSTU-S2-115RE
WSTU-S2-200RE
WSTU-S2-203RE
Specialty Tapered
Products
22209
CP-308
Expansion
Part No.
070779
070780
070781
070783
070784
070785
070786
070787
S-2000
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
22208
TRIDENT Seal
Non-Expansion
Part No.
Part Name
070752
WSTU-S2-106R
070753
WSTU-S2-107R
070754
WSTU-S2-108R
070756
WSTU-S2-111R
070757
WSTU-S2-112R
070758
WSTU-S2-115R
070759
WSTU-S2-200R
070760
WSTU-S2-203R
Take-Up
Frame
UNISPHERE II
Shaft
Size
Inch
Bearing
Bearing Reference
Guide
DIMENSIONS
2-7/16 THRU 4-15/16 INCH
E-Family Roller
Bearings
Specialty Tapered
Products
D
F
S-2000
C
T
1-3/8 THRU 3-15/16"
CONSTRUCTION
K J
N M
C
T
1-3/8 THRU 3-15/16"
CONSTRUCTION
UNISPHERE II
B
A
IMPERIAL
C
T
4-7/16 THRU 4-15/16"
CONSTRUCTION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-44
C
T
4-7/16 THRU 4-15/16"
CONSTRUCTION
SELECTIONS
PAGE B12-7
22213
22218
22220
22222
22226
Shaft
Size
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
Bearing Reference
Guide
CP-515
CP-613
CP-810
CP-908
CP-1004
3.20
7.69
1.06
4.38
5.00
1-3/8
1.06
1.25
4.25
2.50
3.59
8.88
1.81
4.50
5.75
1-5/8
1.13
1.50
4.88
2.75
4.00
4.47
6.53
6.91
10.06
12.56
13.38
15.63
1.81
2.06
2.06
2.06
5.50
7.00
7.00
9.00
6.38
6.38
8.75
10.31
1-7/8
2-1/8
2-1/8
2-3/8
1.06
2.06
2.00
2.50
1.63
2.13
2.13
2.50
5.13
6.00
6.78
7.00
2.88
3.38
3.38
3.75
X
Total Exp
4.06
5.13
5.88
3.20
2.00
2.44
1/4
0.025
2.94
4.70
5.94
6.69
3.75
2.41
2.69
1/4
0.025
3.47
5.50
6.00
6.45
7.45
6.81
8.63
9.50
10.25
7.81
9.44
10.33
11.25
4.05
4.58
5.34
5.73
2.52
2.86
3.47
3.64
3.06
3.44
3.75
4.19
1/4
5/16
3/8
3/8
0.025
0.025
N/A
N/A
4.05
4.50
N/A
N/A
IMPERIAL
See Page B15-20 for CP Take-Up Frame
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-45
SELECTIONS
PAGE B12-7
UNIFIED SAF
Shaft
Size
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
CP-502
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
22215
TRIDENT Seal
Non-Expansion
Expansion
Part Number
Part Name
Part Number
Part Name
070762
WSTU-S2-207R
070789
WSTU-S2-207RE
070764
WSTU-S2-211R
070791
WSTU-S2-211RE
070765
WSTU-S2-215R
070792
WSTU-S2-215RE
070766
WSTU-S2-300R
070793
WSTU-S2-300RE
070768
WSTU-S2-307R
070795
WSTU-S2-307RE
070770
WSTU-S2-315R
070797
WSTU-S2-315RE
070772
WSTU-S2-407R
070799
WSTU-S2-407RE
070774
WSTU-S2-415R
070801
WSTU-S2-415RE
Take-Up
Frame
E-Family Roller
Bearings
Shaft
Size
Inch
Bearing
Specialty Tapered
Products
2-7/16 THRU 4-15/16 INCH
S-2000
UNISPHERE II
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
TPHU Take-Up
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-46
SELECTIONS
PAGE B12-7
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
22210
22211
22213
22215
22218
22220
22222
22226
Shaft
Size
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
TRIDENT Seal
Non-Expansion
Expansion
Part Number
Part Name
Part Number
Part Name
070811
TPHU-S2-115R
070829
TPHU-S2-115RE
070812
TPHU-S2-200R
070830
TPHU-S2-200RE
070813
TPHU-S2-203R
070831
TPHU-S2-203RE
070815
TPHU-S2-207R
070833
TPHU-S2-207RE
070817
TPHU-S2-211R
070835
TPHU-S2-211RE
070818
TPHU-S2-215R
070836
TPHU-S2-215RE
070819
TPHU-S2-300R
070837
TPHU-S2-300RE
070821
TPHU-S2-307R
070839
TPHU-S2-307RE
070823
TPHU-S2-315R
070841
TPHU-S2-315RE
070825
TPHU-S2-407R
070843
TPHU-S2-407RE
070827
TPHU-S2-415R
070845
TPHU-S2-415RE
Take-Up
Frame
TP10
TPHU110
TP30
TP40
TPHU120
TPHU130
TP40
TPHU140
TP50
TP60
N/A
N/A
TPHU150
TPHU160
TPHU170
TPHU180
2.84
2.38
0.81
5.19
2.38
1.06
0.44
6.50
6.44
3.06
3.44
6.00
2.94
3.20
2.75
2.75
0.81
0.81
6.25
7.14
3.00
3.33
1.44
1.44
0.56
0.56
7.50
8.50
7.63
8.28
3.50
3.84
3.75
4.06
7.00
8.00
3.59
2.75
0.81
7.13
3.31
1.44
0.56
8.50
8.50
4.00
4.70
8.00
4.00
4.47
6.53
6.91
3.13
3.13
3.38
3.50
0.81
0.81
0.81
0.81
8.41
9.25
10.19
12.44
4.09
4.56
5.00
6.06
1.56
1.56
1.56
1.81
0.69
0.69
0.69
0.69
9.50
11.00
11.00
14.38
10.06
11.50
12.38
14.63
4.50
5.50
6.00
7.19
5.50
6.00
6.45
7.45
9.00
10.50
10.50
13.88
Bearing Reference
Guide
Shaft
Size
E-Family Roller
Bearings
Bearing
Inch
Specialty Tapered
Products
TPHU Take-Up
S-2000
DIMENSIONS
X
Total Exp
1.66
1.25
0.81
3.19
2.00
0.31
1.06
2.00
0.88
0.25
0.020
2.30
1.94
1.88
1.75
1.75
1.06
1.06
3.39
3.53
2.02
2.16
0.31
0.31
1.56
1.44
2.25
2.75
0.94
1.00
0.25
0.25
0.025
0.025
2.59
2.94
1.94
1.75
1.06
3.83
2.45
0.31
1.50
2.75
1.00
0.25
0.025
3.47
2.53
2.50
2.44
2.38
2.25
2.31
2.31
3.94
1.31
1.31
1.31
1.31
4.22
4.52
5.45
5.88
2.66
2.95
3.45
3.66
0.31
0.31
0.38
0.38
1.78
2.00
1.94
1.94
3.13
3.13
4.00
4.45
0.97
1.25
0.86
1.42
0.25
0.31
0.38
0.38
0.025
0.025
0.036
0.036
4.05
4.50
5.00
5.84
See Page B19-20 Thru B19-25 For TP And TPHU Frames
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-47
SELECTIONS
PAGE B12-7
IMPERIAL
UNIFIED SAF
Shaft
Size
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
UNISPHERE II
See Page B19-20 Thru B19-25 For TP And TPHU Frames
Bearing Reference
Guide
DIMENSIONS
S-2000 Bearing Insert
CONTACT SEAL
B
E-Family Roller
Bearings
SHAFT
DIA
SHAFT
DIA
Specialty Tapered
Products
E
A
E
A
4-7/16 THRU 4-15/16" CONSTRUCTION
S-2000
LABYRINTH SEAL
B
UNISPHERE II
SHAFT
DIA
IMPERIAL
E
A
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SHAFT
DIA
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-48
SELECTIONS
PAGE B12-7
22209
22210
22211
22213
22215
22218
22220
22222
22226
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
3.15
0.95
2.53
0.97
2.66
3.35
0.95
2.66
0.95
3.10
3.54
0.95
2.84
1.00
3.34
3.94
4.72
1.05
1.28
2.94
3.20
1.05
1.21
3.66
3.97
5.12
1.28
3.59
1.22
4.63
6.30
7.10
7.87
9.10
1.63
1.88
2.16
2.59
4.00
4.48
6.53
6.91
1.48
1.65
3.27
3.45
5.50
6.00
6.45
7.45
Bearing Reference
Guide
Labyrinth Seal
Part Number
Part Name
070016
INS-S2-106L
070017
INS-S2-107L
070018
INS-S2-108L
070019
INS-S2-111L
070020
INS-S2-112L
070021
INS-S2-115L
070022
INS-S2-200L
070023
INS-S2-203L
070024
INS-S2-207L
070025
INS-S2-211L
070026
INS-S2-215L
070027
INS-S2-300L
070028
INS-S2-307L
070029
INS-S2-315L
070030
INS-S2-407L
070031
INS-S2-415L
Part Name
INS-S2-106R
INS-S2-107R
INS-S2-108R
INS-S2-111R
INS-S2-112R
INS-S2-115R
INS-S2-200R
INS-S2-203R
INS-S2-207R
INS-S2-211R
INS-S2-215R
INS-S2-300R
INS-S2-307R
INS-S2-315R
INS-S2-407R
INS-S2-415R
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-49
SELECTIONS
PAGE B12-7
UNIFIED SAF
IMPERIAL
Shaft
Size
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
TRIDENT Seal
Part Number
070000
070001
070002
070003
070004
070005
070006
070007
070008
070009
070010
070011
070012
070013
070014
070015
E-Family Roller
Bearings
22208
Shaft
Size
Specialty Tapered
Products
Bearing
S-2000
S-2000 Bearing Insert
UNISPHERE II
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
Steel S-2000 Open End Covers
E-Family Roller
Bearings
Specialty Tapered
Products
Shaft
Size
S-2000
UNISPHERE II
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
Front End
S2000 & S2000-HD
E-S2000 & ES2000-HD
Dodge
Dodge
Part
Description
Part
Description
No.
No.
070240
S2ECO-08-106
070240
S2ECO-08-106
070241
S2ECO-08-107
070241
S2ECO-08-107
070242
S2ECO-08-108
070242
S2ECO-08-108
070243
S2ECO-09-111
070243
S2ECO-09-111
070244
S2ECO-09-112
070244
S2ECO-09-112
070245
S2ECO-10-115
070245
S2ECO-10-115
070246
S2ECO-10-200
070246
S2ECO-10-200
070247
S2ECO-11-203
070247
S2ECO-11-203
070178
S2IPECO-13-207
070178
S2IPECO-13-207
070248
S2ECO-15-211
070248
S2ECO-15-211
070249
S2ECO-15-215
070249
S2ECO-15-215
070250
S2ECO-15-300
070250
S2ECO-15-300
070186
S2IPECO-18-307
070186
S2IPECO-18-307
070189
S2IPECO-20-315
070189
S2IPECO-20-315
070191
S2IPECO-22-407
070191
S2IPECO-22-407
070193
S2IPECO-26-415
070193
S2IPECO-26-415
Backside
S2000 & S2000-HD
E-S2000 & ES2000-HD
Dodge
Dodge
Part
Description
Part
Description
No.
No.
072503
S2IPBECO-08-106
072503
S2IPBECO-08-106
072504
S2IPBECO-08-107
072504
S2IPBECO-08-107
072505
S2IPBECO-08-108
072506
ES2IPBECO-09-108
072508
S2IPBECO-09-111
072508
S2IPBECO-09-111
072509
S2IPBECO-09-112
072510
ES2IPBECO-10-112
072512
S2IPBECO-10-115
072512
S2IPBECO-10-115
072513
S2IPBECO-10-200
072513
S2IPBECO-10-200
072514
S2IPBECO-11-203
072514
S2IPBECO-11-203
072518
S2IPBECO-13-207
072518
S2IPBECO-13-207
072520
S2IPBECO-15-211
072520
S2IPBECO-15-211
072522
S2IPBECO-15-215
072522
S2IPBECO-15-215
072523
S2IPBECO-15-300
072523
S2IPBECO-15-300
072526
S2IPBECO-18-307
072526
S2IPBECO-18-307
072529
S2IPBECO-20-315
072529
S2IPBECO-20-315
072532
S2BECO-22-407
072532
S2BECO-22-407
072535
S2BECO-26-415
072535
S2BECO-26-415
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-50
SELECTIONS
PAGE B12-7
Bearing Reference
Guide
DIMENSIONS
Description
S2EC08
S2EC09
S2EC10
S2EC11
S2EC13
S2EC15
S2IPEC18
S2IPEC20
S2IPEC22
S2IPEC26
E-S2000 & ES2000-HD

Dodge Part No.
Description
069960
IPEC08
069961
IPEC09
069962
IPEC10
069963
IPEC11
069964
IPEC13
069965
IPEC15
069966
S2IPEC18
069967
S2IPEC20
069968
S2IPEC22
069969
S2IPEC26
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
PAGE B12-4
B12-51
SELECTIONS
PAGE B12-7
UNIFIED SAF
IMPERIAL
UNISPHERE II
1-3/8 to 1-1/2
1-11/16 to 1-3/4
1-15/16 to 2
2-3/16
2-7/16
2-11/16 to 3
3-7/16
3-15/16
4-7/16
4-15/16
S2000 & S2000-HD

Dodge Part No.
069970
069971
069972
069973
069964
069975
069966
069967
069968
069969
S-2000
Shaft
Size
Specialty Tapered
Products
E-Family Roller
Bearings
Steel S-2000 Closed End Covers
Bearing Reference
Guide
DIMENSIONS
S2000 End Cover
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
S2000
S2000 *E-S2000 *E-S2000
S2000 *E-S2000 S2000
Pillow
Pillow
Pillow
Pillow
Piloted Piloted Round
Block
Block
Block
Block
Flange Flange Flange
(2-Bolt) (4-Bolt) (2-Bolt) (4-Bolt)
1-3/8
2.03
2.03
1.67
1.67
3.12
1-7/16
1.97
N/A
1.97
N/A
1.61
1.61
3.06
1-1/2
2.11
2.11
2.46
2.46
0.99
2.22
2.22
1.83
1.83
3.33
1-11/16
2.16
N/A
2.16
N/A
1.77
1.77
3.27
2.25
2.25
2.60
2.60
1.10
2.22
2.22
1.83
1.83
3.33
1-3/4
2.16
N/A
2.16
N/A
1.77
1.77
3.27
2.25
2.25
2.60
2.60
1.10
1-15/16
2.31
2.31
2.31
1.92
1.92
3.47
THRU
2.25
2.25
2.25
N/A
1.86
1.86
3.41
2
2.45
2.45
2.45
2.83
2.83
1.28
2.47
2.47
2.47
2.00
2.00
3.69
2-3/16
2.41
2.41
2.41
N/A
1.94
1.94
3.63
2.54
2.54
2.54
3.00
3.00
1.32
2.53
2.53
2.53
2.53
2.18
2.18
4.04
2-7/16
2.44
2.44
2.44
2.44
2.09
2.09
3.95
2.77
2.77
2.77
2.77
3.24
3.24
1.37
2-11/16
2.65
2.65
2.65
2.65
2.29
2.29
4.18
2-15/16
2.56
2.56
2.56
2.56
2.20
2.20
4.09
3
3.06
3.06
3.06
3.06
3.54
3.54
1.66
3.07
3.07
3.07
3.07
2.91
2.91
3-7/16
2.94
2.94
2.94
2.94
2.78
2.78
N/A
3.31
3.31
3.31
3.31
3.59
3.59
3.49
3.49
3.49
3.32
3.32
3-15/16
3.36
3.36
N/A
3.36
3.19
3.19
N/A
3.80
3.80
3.80
4.13
4.13
3.96
3.91
4.02
3.85
4-7/16
N/A
3.83
N/A
3.78
3.89
3.72
N/A
4.23
4.23
4.16
4.68
4.49
4.46
4.24
4.08
5
N/A
4.36
N/A
4.33
4.11
3.95
N/A
4.69
4.69
4.91
5.37
Shaft
Size
A OPEN
B CLOSED
C OPEN
A OPEN
B CLOSED
C OPEN
A OPEN
B CLOSED
C OPEN
A OPEN
B CLOSED
C OPEN
A OPEN
B CLOSED
C OPEN
A OPEN
B CLOSED
C OPEN
A OPEN
B CLOSED
C OPEN
A OPEN
B CLOSED
C OPEN
A OPEN
B CLOSED
C OPEN
A OPEN
B CLOSED
C OPEN
A OPEN
B CLOSED
C OPEN
UNIFIED SAF
FEATURES/BENEFITS
PAGE B12-2
SPECIFICATION
PAGE B12-4
S2000 *E-S2000 Wide

Top
Square Square
Slot
Angle
Flange Flange Take-Up Take-Up
3.45
3.39
0.99
4.07
4.01
1.10
4.07
4.01
1.10
3.95
3.89
1.28
4.53
4.47
1.32
4.72
4.63
1.37
5.06
4.97
1.66
5.78
5.65
1.63
7.17
7.04
1.94
N/A
N/A
3.45
3.39
1.20
4.07
4.01
1.20
4.07
4.01
1.20
3.95
3.89
1.38
4.53
4.47
1.40
4.72
4.63
2.77
5.06
4.97
1.69
5.78
5.65
1.66
7.17
7.04
1.38
7.62
7.49
2.06
N/A
PAGE B12-4
B12-52
2.06
2.00
2.10
2.19
2.13
2.25
2.19
2.13
2.25
2.25
2.19
2.45
2.42
2.36
2.54
2.53
2.44
2.77
2.70
2.61
3.06
3.07
2.94
3.31
3.52
3.39
3.80
3.97
3.84
4.23
4.49
4.36
4.69
N/A
2.94
3.19
0.75
N/A
3.27
3.39
0.88
N/A
3.27
3.39
0.88
3.52
3.61
1.02
3.77
3.95
1.03
4.41
4.64
1.00
4.92
5.06
1.22
5.98
6.22
1.13
6.67
6.91
1.38
7.31
7.56
1.67
8.44
8.69
1.91
2.31
2.25
2.43
2.47
2.40
2.54
2.70
2.61
2.72
2.73
2.64
3.06
3.07
2.94
3.31
3.61
3.48
3.83
3.96
3.83
4.23
4.49
4.36
4.68
SELECTIONS
PAGE B12-7
UNISPHERE II
Features / Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-2
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-3
Bearing Reference
Guide
CONTENTS
Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-3
Pillow Block - Inch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-12
Flange Bearing - Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-14
Bearing Insert With Seal - Inch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-16
Plummer Block Bearing - Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-18
Flange Bearing - Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-20
Bearing Insert With Seal - Metric. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-21
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
Specialty Tapered
Products
Dimensions
E-Family Roller
Bearings
Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-4
B13-1
Bearing Reference
Guide
FEATURES/BENEFITS
UNISPHERE II
UNISPHERE II
High capacity double row spherical bearings
2-bolt pillow blocks and 4-bolt flange bearings 1-7/16
to 4, 40mm to 90mm.
E-Family Roller
Bearings
Same rolling elements and installation ready features as

the S-2000 bearing.
Ductile iron pillow block housing with 65,000 PSI
tensile strength is 92% the strength of steel.
DODGE R Seal provides contacting lip protection,
crimped to the outer race; maintains sealing
effectiveness at maximum misalignment.
Specialty Tapered
Products
Springlok collar mount with 65 setscrew spacing for

optimum clamping force.
S-2000
UNISPHERE II
Dimensionally comparable with

ball bearings:
Length through the bore
Base-to-center height
Footprint
Approximately five times the rating of a ball bearing
IMPERIAL
UNIFIED SAF
B13-2
INCH
DODGE Unitized UNISPHERE II are general purpose, highcapacity, double-row spherical roller bearings. All are mounted
in single piece precision machined housings. Bearings are
mounted to shafts by means of set screw collars, with 65
degree set screw spacing for maximum clamping force.
iron (ASTM A536 Grade 65-45-12) with 65,000 p.s.i. tensile

strength. Housing designs are available for survival in extreme
harsh environments, through the use of special finishes and
stainless hardware.
Housings are available in a variety of standard configurations,
including pillow blocks and flanges. Rubbing lip seals are
standard on all units.
UNISPHERE II
S-2000
Specialty Tapered
Products
ASTM A48 Class 30 cast iron is the standard material used in

S-2000 housings and UNISPHERE II flanged housings. The
standard material used in UNISPHERE II pillow blocks is ductile
Bearing Reference
Guide
UNISPHERE II
E-Family Roller
Bearings
SPECIFICATION
NOMENCLATURE
P2B - UN2 - 207 - R
STYLE
TYPE
P2B = Pillow Block 2-Bolt

Base, Ductile Iron
UN2 =
UNISPHERE II
SIZE
Inches and 16th
2 = 2 and 07 = 7/16
or 207 = 2-7/16
F4B = Flange Bearing

4-Bolt, Cast Iron
FEATURES/BENEFITS
PAGE B13-2
NOMENCLATURE
PAGE B13-3
SELECTION
PAGE B13-4
B13-3
SEAL
IMPERIAL
BEARING
R=
Single Lip
Rubbing Seal
E=
Expansion Type Bearing - If E

Does Not Appear, Bearing Is
Non-Expansion Type
M=
Metric Bore
DIMENSIONS
PAGE B13-12
UNIFIED SAF
HOUSING
Bearing Reference
Guide
SELECTION
UNISPHERE II
E-Family Roller
Bearings
DODGE Unitized Spherical Roller Bearings have the capacity to

carry heavy radial loads and combined radial and thrust loads.
The maximum recommended load which can be applied is
limited by various components in the system such as bearing,
as listed in this catalog. DODGE spherical roller bearings have
been applied successfully even when these limits have been
exceeded under controlled operating conditions. Contact
DODGE Application Engineering (864-284-5700) for applications
which exceed the recommendations of this catalog.
7 on page B13-11 for maximum values. Where a load pulls
end loading of pillow blocks and radial loads for flange units.
Shaft Tolerances
Specialty Tapered
Products
Shaft Size
UP TO 1-1/2
1-9/16 TO 4
4-7/16 TO 5
conditions.
L10 Life, Hours =
10/3
( )
C
P
16667
RPM
)
Where: C = Dynamic Capacity (Table1 and Table 2 on pages

B13-6 and B13-7) lbs.
3. Establish RPM.
S-2000
Using the easy selection Table3 on page B13-8 , find, under the
RPM column, the equivalent radial load that equals or is slightly
higher than the application radial load for the desired life. The
shaft size on the far left will be the minimum shaft size that you
can use for your application.

UNISPHERE II
IMPERIAL

of the shaft attachment to carry thrust load depends on
proper tightening of the set screws, shaft tolerance and shaft
deflections. Therefore, it is advisable to use auxiliary thrust
carrying devices such as shaft shoulder, snap ring or a thrust
collar to locate the bearing under thrust loads heavier than
shown below, or where extreme reliability is desired.
20-200
C/20
201 - 2000
C/40
3. RPM = 1,020
the 4000 lbs, radial load for shaft size 2-7/16. A bearing with
bore 2-7/16, or larger, may be used for this application.
Over 2000
C/60
UNIFIED SAF

normal radial and radial/thrust load applications. The radial load
is limited by the attachment to the shaft (see Table1 on page
B13-6). Where the applied radial load (FR) exceeds this limit
(maximum allowable slip fit radial load), a snug-to-light press fit
of the shaft is required. Since the allowable load, especially at a
low speed, is very large, the shaft should be checked to assure
FEATURES/BENEFITS
PAGE B13-2

(FR = P for Pure Radial Load Conditions). The DODGE
program BEST can be used to find application loads.
GENERAL
RPM
S-2000
+.0000 -.0005
+.000 -.001
+.000 -.0015
The DODGE Bearing Evaluation and Selection Technique

bearing loads, fatigue life and operating temperature for a two
bearing shaft system based on user supplied input parameters.
This interactive web based program is available at www.dodgept.com. Use PT Wizard on line under the tools drop down box.
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-4
DIMENSIONS
PAGE B13-12


LOADS
16667

X P

the dynamic capacity column on Table1 on pageB13-6 the
C value equal to or greater than the C value just calculated.
The bore size on the far left represents the proper bore size
selection. Check that the application RPM does not exceed the
MAX. RPM on Table1 and Table 2 on pages B13-6 and B13-7 .
Also check that the radial load does not exceed the Maximum
Allowable Slip Fit Radial Load shown on Table 1 and Table 2.
If it does, a line-to-line to light press fit of shaft is required.
selection.
SELECTING BEARINGS SUPPORTING

COMBINATION RADIAL AND THRUST LOADS
and Y (thrust factor) from Table 1 and Table 2 converts the
applied thrust load and radial loads to an equivalent radial load
having the same effect on the life of the bearing as a radial load
of this magnitude.
Where:
P
FR

FA
e
X
Y

= Radial load, lbs. (see Table 1 for allowable slip fit
maximum load)
= Thrust load to radial load factor (Table 1 and Table 2)
= Radial load factor (Table 1 and Table 2)
= Thrust load factor (Table 1 and Table 2)

selected bore size. Determine X and Y from Table1 and Table 2
on pages B13-6 and B13-7 depending on whether FA/FR is equal
to or less than e, or FA/FR is greater than e. Substitute all known
values into the equivalent radial load equation. P (equivalent
radial load) can be used in the life formula to determine L10, or it
FEATURES/BENEFITS
PAGE B13-2
DODGE UNISPHERE II spherical roller bearings are lubricated

at the factory with Mobilgrease XHP222 grease. Mobilgrease
XHP222 is a superior industrial grease using a lithium complex
thickener and highly refined base oil. This grease will adequately
handle low and medium speeds with low and medium loads at
normal temperatures as defined on Table6 on page B13-10. For
very low and high speeds, for heavy loads and for low and high
temperatures, special greases must be used. Contact DODGE
Application Engineering (864-284-5700). DODGE engineers
will recommend bearings and lubricants for the above unusual
conditions. DODGE also has the expertise to custom design and
build special bearings for your needs. The only maintenance
requirement for DODGE Unitized roller bearings is periodic
relubrication at regular intervals as outlined in the appropriate
In nearly all applications, good design practice requires two
bearings up both vertically and horizontally, it is possible to
Bearings. UNISPHERE II bearings are designed to allow a
maximum of 1 of static and dynamic misalignment. However,
for optimum seal performance, misalignment should be kept
under 0.5. To ensure good alignment, mounting surfaces must
be checked for flatness and must lie in the same plane. When
tightening base bolts, each bolt should be alternately tightened
in incremental torque values until full torque is achieved to
prevent the angular shifting of the pillow block that occurs
when one bolt is tightened to its full torque. Shimming may be
required to minimize misalignment.
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-5
DIMENSIONS
PAGE B13-12
UNISPHERE II
L10 X RPM 0.3
IMPERIAL
UNIFIED SAF
C=
Bearing Reference
Guide
can be compared to the allowable equivalent radial load ratings

for the speed and hours life desired in the easy selection Table
3 on page B13-8 or Table 4 on page B13-9.
E-Family Roller
Bearings

SELECTION CHART.
Specialty Tapered
Products
UNISPHERE II
S-2000
SELECTION
Bearing Reference
Guide
SELECTION
UNISPHERE II
Table 1: UNISPHERE II Spherical Roller Bearings Radial And Thrust Factors

FA/FR e
E-Family Roller
Bearings
Shaft
Size
Inch
Basic
Bearing
Description
FA/FR e
Max.
Allow.
Slip Fit
Radial
Load
FR*
Lbs.
Specialty Tapered
Products
S-2000
UNISPHERE II
1-1/8
1-3/16
1-1/4
22208
0.28
1
2.4
0.67
3.6
3,750
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
22209
0.26
1
2.6
0.67
3.9
3,750
1-3/4
1-7/8
1-15/16
22210
0.24
1
2.8
0.67
4.2
4,000
2
2-3/16
22211
0.23
1
2.9
0.67
4.3
4,860
2-1/4
2-3/8
2-7/16
22213
0.24
1
2.8
0.67
4.2
6,840
2-1/2
2-11/16
2-3/4
22215
0.22
1
3.1
0.67
4.6
7,500
2-15/16
3
3-3/16
3-1/4
22218
0.23
1
2.9
0.67
4.3
11,500
3-7/16
3-1/2
3-11/16
3-15/16
22220
0.24
1
2.8
0.67
4.2
14,400
4
* If load exceeds Max. allowable slip fit load, line to line to light press fit of shaft required. Maximum slip fit radial loads apply if
recommended shaft sizes are used.
Dynamic
Capacity
(C)
Lbs.
Static
Capacity
C0
Maximum
RPM
20,800
21,000
3,000
20,800
22,000
2,800
22,000
24,000
2,625
27,000
29,000
2,325
39,000
47,500
1,900
41,500
53,000
1,700
65,500
81,500
1,400
83,000
104,000
1,250
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-6
DIMENSIONS
PAGE B13-12
Bearing Reference
Guide
Table 2: UNISPHERE II Metric Spherical Roller Bearing
Shaft
MM
Basic
Bearing
Description
FA/FR e
FA/FR e
e
X
Dynamic
Capacity
(C)
kN
Maximum
RPM
17
93
3000
17
93
2800
18
22
98
120
2625
2325
30
169
1900
33
185
1700
51
285
1400
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-7
DIMENSIONS
PAGE B13-12
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
30
22208
0.28
1
2.4
0.67
3.6
35
40
22209
0.26
1
2.6
0.67
3.9
45
50
22210
0.24
1
2.8
0.67
4.2
55
22211
0.23
1
2.9
0.67
4.3
60
22213
0.24
1
2.8
0.67
4.2
65
70
22215
0.22
1
3.1
0.67
4.6
75
80
85
22218
0.23
1
2.9
0.67
4.3
90
* If load exceeds Max. allowable slip fit load, line to line to light press fit of shaft required. Maximum slop fit radial loads apply if
recommended shaft sizes are used.
Max.
Allow. Slip
Fit Radial
Load
FR*
kN
E-Family Roller
Bearings
UNISPHERE II
Specialty Tapered
Products
SELECTION
Bearing Reference
Guide
SELECTION
UNISPHERE II
Table 3: Easy Selection Table for UNISPHERE Double Row Spherical Roller Bearings
Shaft
Size
Inches
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
L10
Life
50
100
150
250
500
870
1,020
1,250
1,400
1,700
1,900
2,325
Hours
10,000
7,498
6,090
5,393
4,626
3,758
3,182
3,034
2,855
2,759
2,603
2,518
2,370
30,000
5,393
4,380
3,878
3,327
2,703
2,289
2,182
2,053
1,984
1,872
1,811
1,704
1-3/8
to
40,000
4,947
4,018
3,558
3,052
2,479
2,100
2,002
1,883
1,820
1,717
1,661
1,563
1-1/2
60,000
4,380
3,558
3,150
2,703
2,195
1,859
1,773
1,668
1,612
1,521
1,471
1,384
100,000
3,758
3,052
2,703
2,319
1,883
1,595
1,521
1,431
1,383
1,305
1,262
1,188
10,000
7,498
6,090
5,393
4,626
3,758
3,182
3,034
2,855
2,759
2,603
2,518
2,370
5,393
4,380
3,878
3,327
2,703
2,289
2,182
2,053
1,984
1,872
1,811
1,704
1-11/16 30,000
to
40,000
4,947
4,018
3,558
3,052
2,479
2,100
2,002
1,883
1,820
1,717
1,661
1,563
1-3/4
60,000
4,380
3,558
3,150
2,703
2,195
1,859
1,773
1,668
1,612
1,521
1,471
1,384
100,000
3,758
3,052
2,703
2,319
1,883
1,595
1,521
1,431
1,383
1,305
1,262
1,188
10,000
7930
6441
5704
4893
3975
3366
3209
3019
2918
2753
2663
2506
5704
4633
4102
3519
2859
2421
2308
2172
2099
1980
1915
1803
1-15/16 30,000
to
40,000
5232
4250
3763
3228
2622
2221
2117
1992
1925
1817
1757
1654
2
60,000
4633
3763
3332
2859
2322
1966
1875
1764
1705
1608
1556
1464
100,000
3975
3228
2859
2452
1992
1687
1608
1513
1463
1380
1335
1256
10,000
9,733
7,905
7,000
6,005
4,878
4,131
3,939
3,706
3,582
3,379
3,268
3,076
30,000
7,000
5,686
5,035
4,319
3,508
2,971
2,833
2,665
2,576
2,430
2,350
2,212
2-3/16 40,000
6,421
5,216
4,618
3,962
3,218
2,726
2,599
2,445
2,363
2,229
2,156
2,029
60,000
5,686
4,618
4,089
3,508
2,850
2,413
2,301
2,165
2,092
1,974
1,909
1,797
100,000
4,878
3,962
3,508
3,010
2,445
2,070
1,974
1,857
1,795
1,694
1,638
1,542
10,000
14,058 11,419 10,111
8,674
7,046
5,967
5,689
5,352
5,173
4,881
4,721
30,000
10,111
8,213
7,272
6,239
5,068
4,292
4,092
3,850
3,721
3,510
3,395
2-7/16
40,000
9,275
7,534
6,671
5,723
4,649
3,937
3,753
3,531
3,413
3,220
3,114
2-1/2
60,000
8,213
6,671
5,907
5,068
4,116
3,486
3,324
3,127
3,022
2,851
2,758
100,000
7,046
5,723
5,068
4,348
3,531
2,991
2,851
2,683
2,593
2,446
2,366
6,350
6,054
5,696
5,505
5,194
10,000
14,959 12,151 10,759
9,230
7,497
10,759
8,739
7,738
6,639
5,392
4,567
4,354
4,096
3,959
3,735
2-11/16 30,000
40,000
9,870
8,017
7,098
6,090
4,946
4,189
3,994
3,758
3,632
3,427
to
3
60,000
8,739
7,098
6,285
5,392
4,380
3,709
3,537
3,327
3,216
3,034
100,000
7,497
6,090
5,392
4,626
3,758
3,182
3,034
2,855
2,759
2,603
10,000
23,611 19,178 16,981 14,569 11,833 10,022
9,555
8,989
8,689
30,000
16,981 13,793 12,213 10,478
8,511
7,208
6,872
6,465
6,249
3-7/16
40,000
15,577 12,653 11,203
9,612
7,807
6,612
6,304
5,931
5,732
3-1/2
60,000
13,793 11,203
9,920
8,511
6,913
5,855
5,582
5,251
5,076
100,000 11,833
9,612
8,511
7,302
5,931
5,023
4,789
4,505
4,355
10,000
29,919 24,302 21,518 18,461 14,995 12,699 12,108 11,391
30,000
21,518 17,478 15,476 13,278 10,785
9,134
8,708
8,193
3-15/16
40,000
19,739 16,033 14,197 12,180
9,893
8,378
7,988
7,515
4
60,000
17,478 14,197 12,571 10,785
8,760
7,419
7,073
6,655
100,000 14,995 12,180 10,785
9,252
7,515
6,365
6,068
5,709
UNIFIED SAF
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-8
2,625
2,285
1,643
1,508
1,335
1,145
2,285
1,643
1,508
1,335
1,145
2417
1738
1595
1412
1211
2,800
2,241
1,612
1,479
1,309
1,123
2,241
1,612
1,479
1,309
1,123
DIMENSIONS
PAGE B13-12
3000
2,195
1,579
1,448
1,282
1,100
2,195
1,579
1,448
1,282
1,100
Bearing Reference
Guide
SELECTION
UNISPHERE II
Table 4: Easy Selection Table for Metric UNISPHERE Double Row Spherical Roller Bearings
9,769
7,026
6,445
5,707
4,896
E-Family Roller
Bearings
9,973
7,173
6,580
5,826
4,998
9,969
7,170
6,577
5,824
4,996
3000
S-2000
10,168
7,313
6,709
5,940
5,096
10,164
7,310
6,705
5,937
5,094
10,755
7,735
7,096
6,283
5,390
2,800
Specialty Tapered
Products
2,625
UNISPHERE II
L10
Allowable Equivalent Radial Load Rating (Newtons) at Various Revolutions per Minute
Life
50
100
150
250
500
870
1,020
1,250
1,400
1,700
1,900
2,325
Hours
10,000
33,365 27,101 23,997 20,587 16,722 14,162 13,502 12,703 12,278 11,584 11,204 10,545
30,000
23,997 19,492 17,259 14,807 12,027 10,186
9,711
9,136
8,831
8,331
8,058
7,584
30
40,000
22,013 17,880 15,832 13,583 11,032
9,343
8,908
8,381
8,101
7,642
7,392
6,957
35
60,000
19,492 15,832 14,019 12,027
9,769
8,273
7,888
7,421
7,173
6,767
6,545
6,160
100,000 16,722 13,583 12,027 10,318
8,381
7,098
6,767
6,367
6,154
5,806
5,615
5,285
10,000
33,350 27,089 23,986 20,578 16,715 14,156 13,496 12,697 12,273 11,578 11,198 10,540
30,000
23,986 19,483 17,251 14,800 12,021 10,181
9,707
9,132
8,827
8,327
8,054
7,581
40
40,000
22,003 17,872 15,825 13,576 11,027
9,339
8,904
8,377
8,097
7,639
7,388
6,954
45
60,000
19,483 15,825 14,012 12,021
9,764
8,270
7,884
7,418
7,170
6,764
6,542
6,158
100,000 16,715 13,576 12,021 10,313
8,377
7,095
6,764
6,364
6,151
5,803
5,613
5,283
10,000
35,290 28,664 25,381 21,775 17,687 14,979 14,281 13,436 12,987 12,252 11,850 11,154
30,000
25,381 20,616 18,255 15,661 12,721 10,773 10,271
9,663
9,340
8,812
8,523
8,022
50
40,000
23,283 18,911 16,745 14,366 11,669
9,883
9,422
8,864
8,568
8,083
7,818
7,359
60,000
20,616 16,745 14,828 12,721 10,333
8,751
8,343
7,849
7,587
7,158
6,923
6,516
100,000 17,687 14,366 12,721 10,913
8,864
7,507
7,158
6,734
6,509
6,141
5,939
5,590
10,000
43,291 35,163 31,136 26,712 21,697 18,375 17,519 16,482 15,931 15,030 14,536 13,682
30,000
31,136 25,290 22,394 19,212 15,605 13,216 12,600 11,854 11,458 10,810 10,455
9,841
55
40,000
28,561 23,199 20,542 17,623 14,315 12,123 11,558 10,874 10,511
9,916
9,591
9,027
60,000
25,290 20,542 18,189 15,605 12,675 10,735 10,234
9,629
9,307
8,780
8,492
7,993
100,000 21,697 17,623 15,605 13,388 10,874
9,209
8,780
8,261
7,984
7,533
7,286
6,857
10,000
62,531 50,791 44,974 38,584 31,340 26,542 25,305 23,807 23,012 21,710 20,997
30,000
44,974 36,530 32,346 27,750 22,540 19,089 18,200 17,123 16,551 15,614 15,102
60
40,000
41,255 33,510 29,672 25,456 20,677 17,511 16,695 15,707 15,182 14,323 13,853
65
60,000
36,530 29,672 26,273 22,540 18,308 15,505 14,783 13,908 13,443 12,683 12,266
100,000 31,340 25,456 22,540 19,338 15,707 13,302 12,683 11,932 11,533 10,881 10,524
10,000
66,539 54,047 47,857 41,057 33,349 28,243 26,927 25,334 24,487 23,101
30,000
47,857 38,872 34,420 29,529 23,985 20,313 19,367 18,221 17,611 16,615
70
40,000
43,900 35,658 31,574 27,088 22,002 18,634 17,765 16,714 16,155 15,241
75
60,000
38,872 31,574 27,957 23,985 19,482 16,499 15,731 14,800 14,305 13,496
100,000 33,349 27,088 23,985 20,577 16,714 14,155 13,496 12,697 12,272 11,578
10,000 105,020 85,303 75,533 64,801 52,635 44,577 42,499 39,984 38,648
30,000
75,533 61,352 54,325 46,606 37,856 32,061 30,567 28,758 27,796
80
85
40,000
69,287 56,279 49,833 42,753 34,726 29,410 28,039 26,380 25,498
90
60,000
61,352 49,833 44,126 37,856 30,749 26,041 24,828 23,358 22,578
100,000 52,635 42,753 37,856 32,477 26,380 22,341 21,300 20,040 19,370
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-9
DIMENSIONS
PAGE B13-12
UNIFIED SAF
IMPERIAL
Shaft
Size
mm
Bearing Reference
Guide
SELECTION
UNISPHERE II
Table 5: UNISPHERE II Maximum Axial Expansion - Inch And Metric
E-Family Roller
Bearings
Bore
Size
Inches
Maximum
Expansion
Inches
Bore
Size
mm
Maximum
Expansion
mm
1-7/16 to 1-1/2
1-11/16 to 1-3/4
1-15/16 to 2
2-3/16
2-7/16 to 2-1/2
2-11/16 to 3
3-7/16 to 3-1/2
3-15/16 to 4
5/32
5/32
5/32
5/32
3/16
3/16
3/16
7/32
40, 45
50, 55
60, 65
70, 75
80, 85, 90
3.9
3.9
4.7
4.7
4.7
Specialty Tapered
Products
Table 6: Definition Of Operating Conditions For Unitized

Spherical Roller Bearings
LOW SPEED
MEDIUM SPEED
HIGH SPEED

OVER 8% TO 18% OF C
OVER 18% OF C
C = DYNAMIC CAPACITY
20F TO -100F
OVER 20F TO 200F
OVER 200F TO 400F
LIGHT LOAD
NORMAL LOAD
HEAVY LOAD
S-2000
LOW TEMPERATURE
MEDIUM TEMPERATURE
HIGH TEMPERATURE
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-10
DIMENSIONS
PAGE B13-12
Bearing Reference
Guide
SELECTION
E-Family Roller
Bearings
UNISPHERE II
Table 7: UNISPHERE II Housing Ratings, Ductile*

Max. Recommended Housing Cap Loads
P120 lb
P150 lb
1-1/8 to 1-1/2
UN2107
5500
6750
1-5/8 to 1-3/4
UN2111
6800
8600
1-7/8 to 2
UN2115
8000
9900
2-3/16 to 2-1/4
UN2203
10200
12500
2-3/8 to 2-1/2
UN2207
10200
12400
2-11/16 to 3
UN2215
12900
15900
3-3/16 to 3-1/2
UN2307
11900
14600
3-11/16 to 4
UN2315
16900
20800
* When utilizing heavy cap loads on pillow block housings, the installation must adhere to the following procedures:
Bore
Size
Pillow Block
Designation
P180 lb
8000
10000
11700
14800
14900
18900
17400
24600
1. The pillow block base bolts must be on high strength (Grade 8) bolts and properly tightened to mounting structure
Specialty Tapered
Products
180
S-2000
150
120
3. In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and life requirements
NOTE: To convert kN to pounds-force, multiply kN by a factor of 225.
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-11
DIMENSIONS
PAGE B13-12
IMPERIAL
P180
kN
44
44
52
65
66
66
84
84
77
77
77
UNIFIED SAF
Max. Recommended Housing Cap Loads

P120
P150
kN
kN
UN2040M
31
37
UN2045M
31
37
UN2050M
35
44
UN2055M
45
55
UN2060M
45
55
UN2065M
45
55
UN2070M
57
70
UN2075M
57
70
UN2080M
53
65
UN2085M
53
65
UN2090M
53
65
* When utilizing heavy cap loads on plummer block housings, the installation must adhere to the following procedures:
1. The plummer block base bolts must be of high strength (Grade 10.9) and properly tightened to mounting structure.
3. In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and life requirements.
Plummer Block
Designation
UNISPHERE II
Table 8: Metric UNISPHERE II Housing Ratings, Ductile*
Bearing Reference
Guide
DIMENSIONS
UNISPHERE II Pillow Block - Inch
grease fitting
E-Family Roller
Bearings
Specialty Tapered
Products
M
H
D MIN
D MAX
B
S-2000
HSG
HSG
E
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B13-2
EXPANSION
NON-EXPANSION
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-12
SELECTION
PAGE B13-4
UNISPHERE II Pillow Block - Inch

Non-Expansion*
Expansion
Part Name
Part No.
Part Name
Approx. Wt.
Lbs.
048000
048001
048002
048003
048004
048005
048006
048007
048008
048009
048010
048011
048012
048013
048014
048015
048016
P2B-UN2-107
P2B-UN2-108
P2B-UN2-111
P2B-UN2-112
P2B-UN2-115
P2B-UN2-200
P2B-UN2-203
P2B-UN2-207
P2B-UN2-208
P2B-UN2-211
P2B-UN2-212
P2B-UN2-215
P2B-UN2-300
P2B-UN2-307
P2B-UN2-308
P2B-UN2-315
P2B-UN2-400
048017
048018
048019
048020
048021
048022
048023
048024
048025
048026
048027
048028
048029
048030
048031
048032
048033
P2B-UN2-107E
P2B-UN2-108E
P2B-UN2-111E
P2B-UN2-112E
P2B-UN2-115E
P2B-UN2-200E
P2B-UN2-203E
P2B-UN2-207E
P2B-UN2-208E
P2B-UN2-211E
P2B-UN2-212E
P2B-UN2-215E
P2B-UN2-300E
P2B-UN2-307E
P2B-UN2-308E
P2B-UN2-315E
P2B-UN2-400E
5.5
5.4
6.9
6.8
8.0
7.6
9.8
13.6
13.4
19.3
19.0
18.2
18.1
28.4
27.0
37.4
37.0
E-Family Roller
Bearings
Part No.
Specialty Tapered
Products
Shaft Size
Inch
1-7/16
22208
1-1/2
1-11/16
22209
1-3/4
1-15/16
22210
2
22211
2-3/16
2-7/16
22213
2-1/2
2-11/16
2-3/4
22215
2-15/16
3
3-7/16
22218
3-1/2
3-15/16
22220
4
Assembled to order. Consult DODGE for delivery.
Consult DODGE for sizes not listed.
* Furnished unless otherwise specified.
Bearing
Bearing Reference
Guide
DIMENSIONS
2.75
1.88
0.50
1.19
3.00
2.13
0.47
1.44
3.25
2.25
0.47
1.44
3.50
2.50
0.52
1.48
4.06
2.75
0.66
1.55
4.72
3.25
0.77
1.69
5.50
3.75
0.94
1.91
6.47
4.13
1.13
2.19
UNISPHERE II
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-13
SELECTION
PAGE B13-4
UNIFIED SAF
IMPERIAL
Shaft
E
F
D
Size
A
B
C
Total
Bolt
G
H
J
Inch
Exp.
Dia.
Min.
Max.
1-7/16
1.69
6.88
1.95
4.69
5.50
5/32
1/2
0.97
0.97
3.88
1-1/2
1-11/16
1.91
7.38
2.06
5.19
5.88
5/32
1/2
0.91
1.31
4.25
1-3/4
1-15/16
1.91
8.38
2.06
5.94
6.69
5/32
5/8
1.06
1.38
4.56
2
2-3/16
2.00
8.88
2.31
6.44
7.13
5/32
5/8
1.03
1.63
5.00
2-7/16
2.20
9.25
2.56
6.81
7.44
3/16
5/8
1.00
1.75
5.69
2-1/2
2-11/16
2-3/4
2.45
10.44
2.56
7.81
8.44
3/16
3/4
1.13
2.25
6.44
2-15/16
3
3-7/16
2.86
13.00
2.81
9.25
10.75
3/16
7/8
1.69
2.25
7.50
3-1/2
3-15/16
3.33
14.25
3.31
10.00
11.88
7/32
1
2.00
2.50
8.44
4
l Dimensions shown are for non-expansion units. The expansion bearing center and housing center are on the same centerline.
S-2000
UNISPHERE II - Pillow Block - Dimensions l
Bearing Reference
Guide
DIMENSIONS
UNISPHERE II Flange Bearing - Inch
4-BOLT
B
E-Family Roller
Bearings

grease fitting
N
B
Specialty Tapered
Products
F
S-2000
UNISPHERE II
L
IMPERIAL
J
H
UNIFIED SAF
EXPANSION
FEATURES/BENEFITS
PAGE B13-2
NON-EXPANSION
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-14
SELECTION
PAGE B13-4
UNISPHERE II Flange Bearing - Inch 4-BOLT

Part No.
Part Name
Approx. Wt.
Lbs.
F4B-UN2-107
F4B-UN2-108
F4B-UN2-111
F4B-UN2-112
F4B-UN2-115
F4B-UN2-200
F4B-UN2-203
F4B-UN2-207
F4B-UN2-208
F4B-UN2-211
F4B-UN2-212
F4B-UN2-215
F4B-UN2-300
F4B-UN2-307
F4B-UN2-308
F4B-UN2-315
F4B-UN2-400
048051
048052
048053
048054
048055
048056
048057
048058
048059
048060
048061
048062
048063
048064
048065
048066
048067
F4B-UN2-107E
F4B-UN2-108E
F4B-UN2-111E
F4B-UN2-112E
F4B-UN2-115E
F4B-UN2-200E
F4B-UN2-203E
F4B-UN2-207E
F4B-UN2-208E
F4B-UN2-211E
F4B-UN2-212E
F4B-UN2-215E
F4B-UN2-300E
F4B-UN2-307E
F4B-UN2-308E
F4B-UN2-315E
F4B-UN2-400E
5.20
5.10
6.70
6.70
6.90
6.70
8.40
10.50
10.40
17.30
17.00
16.20
15.90
24.70
30.00
41.40
41.00
Shaft Size
Inch
1-7/16
1.69
4.75
1-1/2
1-11/16
1.91
5.13
1-3/4
1-15/16
1.91
5.31
2
2-3/16
2.00
5.88
2-7/16
2.20
6.13
2-1/2
2-11/16
2-3/4
2.45
7.19
2-15/16
3
3-7/16
2.86
8.34
3-1/2
3-15/16
3.33
9.47
4
l Dimensions shown are for non-expansion units.
FEATURES/BENEFITS
PAGE B13-2
F
Bolt
Dia.
M
Total
Exp.
1.91
3.53
1/2
0.75
0.56
5.00
2.75
5/32
2.44
2.16
3.91
1/2
0.75
0.72
5.50
3.00
5/32
2.75
2.17
4.06
1/2
0.69
0.70
5.75
3.25
5/32
2.88
2.27
4.50
5/8
0.75
0.67
6.38
3.50
5/32
3.06
2.44
4.78
5/8
1.00
0.63
6.75
4.06
3/16
3.38
2.59
5.56
3/4
0.94
0.78
7.88
4.72
3/16
3.81
3.08
6.72
3/4
1.19
0.86
9.50
5.50
3/16
4.31
3.69
7.63
7/8
1.06
1.05
10.75
6.47
7/32
4.69
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-15
SELECTION
PAGE B13-4
UNISPHERE II
UNISPHERE II 4-BOLT FLANGE DIMENSIONS
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
Part Name
Part No.
048034
048035
048036
048037
048038
048039
048040
048041
048042
048043
048044
048045
048046
048047
048048
048049
048050
Expansion
IMPERIAL
Non-Expansion*
UNIFIED SAF
Shaft Size
Inch
1-7/16
22208
1-1/2
1-11/16
22209
1-3/4
1-15/16
22210
2
22211
2-3/16
2-7/16
22213
2-1/2
2-11/16
2-3/4
22215
2-15/16
3
3-7/16
22218
3-1/2
3-15/16
22220
4
Bearing
Bearing Reference
Guide
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
UNISPHERE II Bearing Insert With Seal - Inch
B
E-Family Roller
Bearings
SHAFT DIA
Specialty Tapered
Products
C
S-2000
UNISPHERE II
IMPERIAL
Shaft Size
Inch
1-7/16
22208
1-1/2
1-11/16
22209
1-3/4
1-15/16
22210
2
22211
2-3/16
2-7/16
22213
2-1/2
2-11/16
2-3/4
22215
2-15/16
3
3-7/16
22218
3-1/2
3-15/16
22220
4
Assembled-to-order size. Consult DODGE for delivery.
Part
No.
421243
421244
421245
421246
421247
421248
421249
421250
421251
421252
421253
421254
421255
421256
421257
421258
421259
Bearing
UNIFIED SAF
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION
PAGE B13-3
Part
Name
Approx. Wt.
Lbs.
BRG-UN2-107
BRG-UN2-108
BRG-UN2-111
BRG-UN2-112
BRG-UN2-115
BRG-UN2-200
BRG-UN2-203
BRG-UN2-207
BRG-UN2-208
BRG-UN2-211
BRG-UN2-212
BRG-UN2-215
BRG-UN2-300
BRG-UN2-307
BRG-UN2-308
BRG-UN2-315
BRG-UN2-400
1.5
1.4
1.6
1.5
1.8
1.7
2.3
4.1
3.9
5.6
5.4
4.8
4.6
9.2
8.6
12.4
12.1
NOMENCLATURE
PAGE B13-3
B13-16
SELECTION
PAGE B13-4
Bearing Reference
Guide
DIMENSIONS
FEATURES/BENEFITS
PAGE B13-2
3.1496
0.95
1.69
0.56
0.29
3.3465
0.95
1.91
0.58
0.32
3.5433
0.95
1.91
0.59
0.32
3.9370
1.03
2.00
0.64
0.32
4.7244
1.27
2.20
0.75
0.32
5.1181
1.27
2.45
0.80
0.44
6.2992
1.62
2.86
0.95
0.44
7.0866
1.86
3.33
1.09
0.51
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-17
SELECTION
PAGE B13-4
UNISPHERE II
IMPERIAL
Shaft Size
Inch
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-7/16
3-1/2
3-15/16
4
UNIFIED SAF
UNISPHERE II BEARING INSERT DIMENSIONS
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
UNISPHERE II Bearing Insert With Seal - Inch
Bearing Reference
Guide
DIMENSIONS
UNISPHERE II Plummer Block Bearing - Metric
E-Family Roller
Bearings
Specialty Tapered
Products
M
H
D MIN

grease fitting
D MAX
B
S-2000
CL HSG
CL HSG
E
UNISPHERE II
A
L
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B13-2
EXPANSION
NON-EXPANSION
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-18
SELECTION
PAGE B13-4
22210
22211
22213
50mm
55mm
60mm
70mm
22215
75mm
80mm
22218
85mm
Part No.
Part Name
Part No.
Part Name
048109
048110
048111
048113
048114
048115
048116
P2B-UN2-050M
P2B-UN2-055M
P2B-UN2-060M
P2B-UN2-070M
P2B-UN2-075M
P2B-UN2-080M
P2B-UN2-085M
048124
048125
048126
048128
048129
048130
048131
P2B-UN2-050ME
P2B-UN2-055ME
P2B-UN2-060ME
P2B-UN2-070ME
P2B-UN2-075ME
P2B-UN2-080ME
P2B-UN2-085ME
METRIC UNISPHERE II - PLUMMER BLOCK - DIMENSIONS (MM)

A
mm
B
mm
C
mm
D
Min.
Max.
E
Total
Exp.
F
Bolt
Dia.
G
mm
H
mm
L
mm
M
mm
R
mm
S
mm
116
127
144
83
89
103
57.1
63.5
69.8
12
13
17
37
38
39
164
120
82.5
19
43
190
140
95.2
24
48
IMPERIAL
UNISPHERE II
50mm
48
213
52
151
170
3.9
16
27
35
55mm
51
225
59
164
181
3.9
16
26
41
60mm
56
235
65
173
189
4.7
16
25
44
70mm
62
265
65
198
214
4.7
20
29
57
75mm
80mm
73
330
71
235
273
4.7
22
43
57
85mm
l Dimensions shown are for non-expansion units. The expansion bearing center and housing center are on the same centerline.
J
mm
FEATURES/BENEFITS
PAGE B13-2
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-19
SELECTION
PAGE B13-4
UNIFIED SAF
Shaft
Size
Bearing Reference
Guide
Approximate
Weight
Kgs.
3.4
4.4
6.2
8.6
8.3
12.9
12.6
Expansion
E-Family Roller
Bearings
Non-Expansion*
Shaft Size
Bearing
Specialty Tapered
Products
UNISPHERE II Plummer Block Bearing - Metric
S-2000
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
UNISPHERE II Flange - Metric
4-BOLT
E-Family Roller
Bearings

grease fitting
B
D
A
B
Specialty Tapered
Products
L
D
H
F
S-2000
Non-Expansion*
Part No.
Part Name
048202
F4B-UN2-040M
048203
F4B-UN2-045M
048204
F4B-UN2-050M
048205
F4B-UN2-055M
048206
F4B-UN2-060M
048207
F4B-UN2-065M
048208
F4B-UN2-070M
048210
F4B-UN2-080M
Shaft Size
Bearing
NON-EXPANSION
EXPANSION
40mm
45mm
22210
50mm
22211
55mm
60mm
22213
65mm
22215
70mm
22218
80mm
22209
Expansion
UNISPHERE II
Part No.
048216
048217
048218
048219
048220
048221
048222
048224
Approx. Wt.
Kgs.
Part Name
F4B-UN2-040ME
F4B-UN2-045ME
F4B-UN2-050ME
F4B-UN2-055ME
F4B-UN2-060ME
F4B-UN2-065ME
F4B-UN2-070ME
F4B-UN2-080ME
3.1
3.1
3
3.8
4.8
4.6
8.2
11.2
METRIC UNISPHERE II - 4-BOLT FLANGE - DIMENSIONS (mm)

IMPERIAL
Shaft
Size
UNIFIED SAF
40mm
48
130
45mm
50mm
48
135
55mm
51
149
60mm
56
156
65mm
70mm
62
183
80mm
73
212
l Dimensions shown are for non-expansion units.
FEATURES/BENEFITS
PAGE B13-2
F
Bolt
Dia.
M
Total
Exp.
55
99
12
19
18
140
76
3.9
70
55
58
103
114
12
16
18
19
18
17
146
162
82
89
3.9
3.9
73
78
62
121
16
25
16
171
103
3.9
86
66
78
141
171
20
20
24
30
20
22
200
241
120
140
4.7
4.7
97
109
SPECIFICATION
PAGE B13-3
NOMENCLATURE
PAGE B13-3
B13-20
SELECTION
PAGE B13-4
Bearing Reference
Guide
DIMENSIONS
UNISPHERE II Bearing Insert With Seal - Metric
E-Family Roller
Bearings
E
SHAFT DIA
Specialty Tapered
Products
S-2000
FEATURES/BENEFITS
PAGE B13-2
Part Name
BRG-UN2-040
BRG-UN2-045
BRG-UN2-050
BRG-UN2-055
BRG-UN2-060
BRG-UN2-065
BRG-UN2-070
BRG-UN2-075
BRG-UN2-080
BRG-UN2-085
BRG-UN2-090
Approx.
Wt.
Kgs.
0.80
0.70
0.75
1.06
1.95
1.74
2.37
2.09
4.54
4.20
3.90
Shaft
Size
40mm
45mm
50mm
55mm
60mm
65mm
70mm
75mm
80mm
85mm
90mm
SPECIFICATION
PAGE B13-3
A
mm
B
mm
C
mm
D
mm
E
mm
85
24
48
14.7
7.26
90
100
24
26
48
51
15.1
16.4
8.05
8.05
120
32.2
56
19.0
8.05
130
32.3
62
20.2
11.2
160
41.3
73
24.1
11.2
NOMENCLATURE
PAGE B13-3
B13-21
SELECTION
PAGE B13-4
UNISPHERE II
Shaft
Part
Size
No.
40mm
421362
22209
45mm
421363
22210
50mm
421364
22211
55mm
421365
60mm
421366
22213
65mm
421367
70mm
421368
22215
75mm
421369
80mm
421370
22218
85mm
421371
90mm
421372
IMPERIAL
Bearing
UNISPHERE Il Bearing Insert

Dimensions-Metric
UNIFIED SAF
UNISPHERE ll Bearing Insert

W/Seals Metric
Bearing Reference
Guide
NOTES
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
B13-22
IMPERIAL - IP, ISAF and ISN

Features And Benefits
.IMPERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-2
Bearing Reference
Guide
CONTENTS
.IMPERIAL-IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-4
ISAF, ISAF HYD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-10
.ISN, ISNX HYD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-12
Specification
.IMPERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-5
E-Family Roller
Bearings
.IMPERIAL-HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-6
How To Order / Nomenclature

.IMPERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-8
ISAF, ISAF HYD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-11
.ISN, ISNX HYD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-13
Selection
Specialty Tapered
Products
.IMPERIAL-HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-7
.IMPERIAL-IP, ISAF, HD, ISN, ISNX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-14
Dimensions
.IMPERIAL - IP Pillow Block, 2 Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-30
Steel IMPERIAL - HD Pillow Block, 2 Bolt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-38
S-2000
.IMPERIAL-IP and SAF Roller Bearing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-17
IMPERIAL - IP Pillow Block, 4 Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-42

Steel IMPERIAL - HD Pillow Block, 4 Bolt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-48
IMPERIAL ISAF, 4 Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-54
.ISAF Pillow Block Hydraulic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-60
.IMPERIAL - ISN Metric Pillow Block, 2 Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-62
.ISNX Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-64
.IMPERIAL - IP Flange - Round . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-66
UNISPHERE II
IMPERIAL ISAF, 2 Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-52
.IMPERIAL - IP Flange - Square. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-70

.Steel IMPERIAL-HD Flange, 4 Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-78
Steel IMPERIAL - HD Piloted Flange. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-90
Steel IMPERIAL- HD Narrow Piloted Flange. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-94
IMPERIAL - IP Wide Slot Take-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-96
.IMPERIAL Bearing Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-100
IMPERIAL
IMPERIAL - IP Piloted Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-82
IMPERIAL ISAF - How to Order ISAF Smart Stock Selections. . . . . . . . . . . . . . . . . . . . . . . . . . B14-103

.IMPERIAL Spanner Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-104
.End Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-106
.Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index-1
Keyword Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keyword-1
B14-1
UNIFIED SAF
.IMPERIAL Lockplate Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14-105
Bearing Reference
Guide
FEATURES/BENEFITS
IMPERIAL
Patented Adapter System

Offers Quick Installation And Removal
E-Family Roller
Bearings
The DODGE IMPERIAL bearing uses a thin wall push-pull adapter system that achieves clearance setting
without the use of feeler gauges. The IMPERIAL bearing is installed by turning the locknut clockwise
and removed by a counterclockwise rotation. Installation and removal of an IMPERIAL bearing can be
accomplished in 15 minutes or less.
Specialty Tapered
Products
Steel Cage With Guide Rings

Offers Precision Roller Guidance
Patented Triple Lip

Nitrile Seal Resists
Heat And Chemical
Breakdown
Ease In Mounting And
Dismounting Achieved
Through Patented Adapter
System
Corrosion Resistant
Flinger Blocks
Contaminants
S-2000
Adapter Sleeve
Improves Concentricity And
Reduces Inherent Vibration
Seal/Land Maintains
Full Seal Contact When
Misaligned
UNISPHERE II
Optional Metallic Labyrinth

Seal And Steel Cage Provide
High Temperature And High
Speed Capabilities
IMPERIAL
Installation and Removal Savings . . .

Factory lubed, sealed and adjusted, ready to slip onto the shaft
IMPERIAL adapter sleeve concentricity virtually eliminates fretting corrosion
Field convertible from non-expansion to expansion and expansion to non-expansion
UNIFIED SAF
Elongated pillow block bolt holes to facilitate mounting
B14-2
IMPERIAL Bearings Offer Patented Seal Options To Maximize

Bearing Life . . .
TRIDENT seals for low to medium speed
Face rubbing triple lip seal
Seal/land positive contact up to 1 degree of misalignment
Bearing Reference
Guide
IMPERIAL
E-Family Roller
Bearings
FEATURES/BENEFITS
Specialty Tapered
Products
Patented design
Labyrinth seals for higher speeds or high temperatures
15% increase in maximum speed over standard SAF adapter mounted

sphericals of the same shaft size
S-2000
High speed for relatively clean or hot environments
Seal operates up to 1 degree of misalignment
UNIFIED SAF
IMPERIAL
UNISPHERE II
Patented design
B14-3
Bearing Reference
Guide
FEATURES/BENEFITS
IMPERIAL - IP
E-Family Roller
Bearings
Specialty Tapered
Products
Flange IMPERIAL
S-2000
ISAF
Pillow Block IMPERIAL
Push-pull adapter mount

UNISPHERE II
Can replace 300 series ball bearings in many

applications
Grease limiting speeds 30% higher than setscrew

mounts
Patented adapter mounting system
Same rolling element as the S-2000 bearing
Superior holding power reduces the fretting corrosion

caused by vibration
Pillow blocks are interchangeable with S-2000

dimensions on all sizes
Shaft ready installation
IMPERIAL
All housings are Class 30 Gray Iron
No special tools required for installation
2 bolt pillow blocks, 4 bolt flange bearings piloted

flange and take-ups 1-1/8 to 4 4 bolt pillow blocks in
sizes 2-3/8 to 5
DODGE TRIDENT triple lip seal provides superior

sealing system
Jackscrew holes standard on piloted flanges
Seal/land on OD of inner ring maintains full contact

Less shaft damage vs. setscrew mounts
Reduced vibration damage vs. setscrew mounts
UNIFIED SAF
NOTE: Instruction manuals for Dodge bearings available on www.dodge-pt.com
B14-4
INCH
DODGE Spherical Bearings, including IMPERIAL bearings,

are general-purpose, high-capacity, double-row spherical
roller bearings. All IMPERIAL bearings are mounted in singlepiece, precision-machined housings. Bearings are mounted to
shafts by means of a patented adapter system that improves
concentricity and reduces inherent vibration.
Housings are available in a variety of standard configurations,

including pillow blocks, flanges, piloted flanges and take-up
bearings. TRIDENT triple lip contact seals and Labyrinth seals
are available on IMPERIAL bearings.
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
Specialty Tapered
Products
ASTM A48 Class 30 cast iron is the standard material used in

IMPERIAL housings. Housing designs are available for survival
in extremely harsh environments, through the use of special
finishes and stainless hardware.
Bearing Reference
Guide
IMPERIAL
E-Family Roller
Bearings
SPECIFICATION
B14-5
Bearing Reference
Guide
FEATURES/BENEFITS
Dodge IMPERIAL-HD
E-Family Roller
Bearings
Dodge IMPERIAL-HD mounted bearings feature proven

Dodge Imperial bearing insert technology deployed in
steel housings designed specifically for harsh applications
that demand superior housing strength. Major features
include
IMPERIAL-HD
Two bolt pillow blocks 1-1/8 to 4

Four bolt pillow blocks 2-3/8 to 5
Four bolt square flange 1-1/8 to 4
Piloted flange 1-1/8 to 5
Narrow piloted Edger flange 1-7/16 to 4-7/16
Imperial patented push-pull adapter mounting system

High capacity cast steel housing
Specialty Tapered
Products
Same dimensions as cast iron Imperial products
E Dimensioned IMPERIAL-HD
Also available in popular Type E dimensioned

housings
Two bolt pillow blocks 1-3/8 to 3-1/2

Four bolt pillow blocks 2-1/4 to 5
Proven, high capacity spherical rollers
Four bolt square flange 1-3/8 to 4-1/2
Effective sealing systems for tough applications

Closed & shaft through end covers
Sealed inserts that can be easily replaced in the field
Field convertible between Expansion & Non-Expansion
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
B14-6
INCH
ASTMA A-27 Grade 70-36 Class 1 steel is the standard

material used in steel IMPERIAL HD housings. Housing
designs are available for survival in extremely harsh
environments, through the use of special finishes and
stainless hardware.
Housings are available in a variety of standard configura
tions, including pillow blocks, flanges, piloted flanges and
take-up bearings. TRIDENT triple lip contact seals and
Labyrinth seals are available on IMPERIAL bearings.
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
Specialty Tapered
Products
DODGE Spherical Bearings, including IMPERIAL-HD

bearings, are general-purpose, high-capacity, double-row
spherical roller bearings. All IMPERIAL-HD bearings are
mounted in single-piece, precision-machined housings.
Bearings are mounted to shafts by means of a patented
adapter system that improves concentricity and reduces
inherent vibration.
Bearing Reference
Guide
IMPERIAL-HD
E-Family Roller
Bearings
SPECIFICATION
B14-7
Bearing Reference
Guide
NOMENCLATURE
E-Family Roller
Bearings

specified by description or part name. This method is
used when ordering units that include modifications or
options. To order by description, use the nomenclature
key shown on this page and add any special instructions
to the end of the description for options not covered by
the nomenclature.
How To Order
There are two ways to specify DODGE Bearings. Most
of the product offerings have part numbers with listings
shown throughout this catalog. Use of part numbers
ensures accurate order processing.
Specialty Tapered
Products

temperatures, high speeds, or high loads are expected,
a variety of specialty lubricants are available. Standard

lubricant provided is Mobil Grease XHP 222, a lithium
complex based grease. High temperature greases
available upon request. Other special lubricants are also
available upon request. Special lubricant options usually
premiums. To order, specify type of lubricant required at
the end of the product name or after the standard part
number.
Example:
071792 or 071650 except with Mobil
Grease
HTS #2 grease
or

SP2BIP108R except with Mobil Grease HTS

#2 grease
encourage you to contact our Application Engineering
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
SELECTION
PAGE B14-14
B14-8
DIMENSIONS
PAGE B14-30
Bearing Reference
Guide
HOUSING
STYLE
S
prefix
denotes
steel
housing
HD series
E
prefix denotes
Type E
dimensioned
housing
P2B - IP - 207 R
BEARING
TYPE
P2B = Pillow Block

2 Bolt Base
IP =
IMPERIAL
P4B = Pillow Block

4 Bolt Base
SIZE
Inches and
16th
2 = 2
07 = 7/16
207 2-7/16
F3R = Flange Bearing

3 Bolt Cast Iron Round
SEAL
R = TRIDENT Triple
Lip Rubbing
Seal
L = Labyrinth
Metallic Seal
OTHER DATA
E = Expansion
Type Bearing
- If E Does
Not Appear,
Bearing
Is NonExpansion
Type
S-2000
F4R = Flange Bearing 4 Bolt Cast

Iron Round
E-Family Roller
Bearings
Imperial - IP
Specialty Tapered
Products
NOMENCLATURE
F4S = Flange Bearing 4 Bolt

Base, Square
FC = Piloted Flanged (Flanged
Cartridge)
UNISPHERE II
FCN = Narrow Piloted Flange
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
SELECTION
PAGE B14-14
B14-9
DIMENSIONS
PAGE B14-30
UNIFIED SAF
IMPERIAL
WSTU = Wide Slot Take-up Bearing

for use in Center Pull
Frame
Bearing Reference
Guide
FEATURES/BENEFITS
ISAF
E-Family Roller
Bearings
Specialty Tapered
Products
Interchangeable with SAF style pillow blocks
Up to 1 misalignment capability
Patented adapter mounting system
Seal land on OD of inner ring maintains full contact

Easy installation - no feeler gauges needed
S-2000
Easy removal - no torches, sledge hammers or special

tools needed
High capacity double row spherical bearings
DODGE TRIDENT triple lip seal provides superior

sealing system
4 bolt pillow blocks in sizes 2-7/16 to 7
2 bolt pillow blocks in sizes 1-7/16 to 3-6/16
Labyrinth seal available for high speed or high

temperature applications.
UNISPHERE II
ISAF HYD
IMPERIAL
UNIFIED SAF
Built in hydraulic mounting and dismounting

- No feeler gauges for installation
- No torches or sledge hammers for removal
4 bolt pillow blocks 5-7/16" through 15"

Built in taconite style sealing
B14-10
Bearing Reference
Guide
P2B
HOUSING
STYLE
5xx for
interchangeable SAF
style housings
ISAF
BEARING TYPE
ISAF = IMPERIAL SAF
207 R
HYD
SIZE
Inches and 16th
SEAL
OTHER
DATA
R=
TRIDENT Triple
Lip Contact Seal
L=
Labyrinth Seal
E = EXPANSION
If E does not
appear, bearing
is a nonexpansion type
2 = 2
07 = 7/16
Pillow Block 4 Bolt

Base, Cast Iron
207 = 2-7/16
UNISPHERE II
S-2000
Hydraulic
version built in
hydraulic assist
IMPERIAL
P4B =
Pillow Block 2 Bolt

Base, Cast Iron
HOUSING
SIZE
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
SELECTION
PAGE B14-14
B14-11
DIMENSIONS
PAGE B14-30
UNIFIED SAF
P2B =
515
E-Family Roller
Bearings
ISAF
Specialty Tapered
Products
NOMENCLATURE
Bearing Reference
Guide
FEATURES/BENEFITS
ISN
E-Family Roller
Bearings
Specialty Tapered
Products
Interchangeable with 500 series SN dimensioned

products
Field convertible from expansion to non-expansion and

vice versa
Patented Imperial "Push/Pull" adapter mounting

system
Triple lip contact seals for wet or dirty applications
Eliminates need for feeler gauges
Labyrinth non-contact seals for higher speed/higher

temperature applications
S-2000
Fifteen minute installation and removal
ISNX HYD
UNISPHERE II
IMPERIAL
UNIFIED SAF
Interchangeable with large-bore 3100 series plummer

blocks
Built in taconite style sealing
Built in hydraulic mounting and dismounting

- No feeler gauges for installation
- No torches or sledge hammers for removal
Four-bolt pillow blocks 150mm through 360mm
B14-12

of the product offerings have part numbers with listings
ensures accurate order processing.
specified by description or part name. This method is
used when ordering units that include modifications or
options. To order by description, use the nomenclature
key shown on this page and add any special instructions
to the end of the description for options not covered by
the nomenclature.
Example:
071792 or 071650 except with Mobil

Grease HTS #2 grease
or

SP2BIP108R except with Mobil

Grease HTS #2 grease
P2B
507 - ISN -
030
MFR
Specialty Tapered
Products

temperatures, high speeds, or high loads are expected,
a variety of specialty lubricants are available. Standard

lubricant provided is Mobil Grease XHP 222, a lithium
complex based grease. High temperature greases
available upon request. Other special lubricants are
available upon request. Special lubricant options usually
premiums. To order, specify type of lubricant required at
the end of the product name or after the standard part
number.
Bearing Reference
Guide
How To Order
E-Family Roller
Bearings
NOMENCLATURE
HYD
Built-in hydraulic mount and dismount
S-2000
Non-expansion
Expansion
Trident rubbing seal
Labyrinth seal
UNISPHERE II
Size
M=
Size in millimeters
030M = 30mm
otherwise inches and 16ths
Bearing Type
ISN = Imperial SN
ISNX = Hydraulic Imperial, large bore
IMPERIAL
Housing Size
5xx For adapter mounted 22200K series bearings

Interchangeable with SN style bearings

Interchangeable with large bore plummer blocks

Interchangeable with large bore plummer blocks
Housing Style
P2B = Pillow Block
2 Bolt Base
P4B = Pillow Block
4 Bolt Base
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
SELECTION
PAGE B14-14
B14-13
DIMENSIONS
PAGE B14-30
UNIFIED SAF
Other Data
F=
L=
R=
S=
Bearing Reference
Guide
SELECTION
IMPERIAL-IP, ISAF, HD, ISN, ISNX
E-Family Roller
Bearings
DODGE Spherical Roller Bearings have the capacity to carry

heavy radial loads and combined radial and thrust loads. The
maximum recommended load which can be applied is limited
by various components in the system such as bearing, housing,
shaft, shaft attachment, speed and life requirements as listed in
this catalog. DODGE spherical roller bearings have been applied
Engineering (864-284-5700) for applications which exceed the
conditions.
Specialty Tapered
Products
L10 Life, Hours =
10/3
( ) (
C
P
16667
RPM

through the base. Where cap loads are involved, see Table
3 on page B4-15 for maximum values. Where a load pulls
end loading of pillow blocks and radial loads for flange units.
Shaft Size
Shaft Tolerances
Tolerance, Inches
Up To 1-1/2
1-9/16 to 2-1/2
2-5/8 to 4
4-3/16 to 6
6-7/16 and above
Where:
C = Dynamic Capacity (Table1 on page B4-17 for IMPERIAL),
lbs.
+.000 -.002
+.000 -.003
+.000 -.004
+.000 -.005
+.000 -.006
S-2000
GENERAL

(FR = P for Pure Radial Load Conditions). The

DODGE program BEST can be used to find

application loads.
3. Establish RPM.

UNISPHERE II
IMPERIAL

of the shaft attachment to carry thrust load depends on proper
tightening of the bearing to the shaft. Therefore, it is advisable
to use auxiliary thrust carrying devices such as shaft shoulder,
snap ring or a thrust collar to locate the bearing under thrust
loads heavier than shown below, or where extreme reliability is
desired.
RPM
Recommended
Thrust Load
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
20- 200
201-2000
Over 2000
C/20
C/40
C/60
Using the easy selection Table2 on page B4-18 for IMPERIAL,

find, under the RPM column, the equivalent radial load that
equals or is slightly higher than the application radial load for
the desired life. The shaft size on the far left will be the minimum
shaft size that you can use for your application.
Example:
1. L10 Life = 30,000 Hours
3. RPM = 1,000

the 4000 lbs. radial load for shaft size 2-3/8 to 2-1/2. A
bearing with bore ranging from 2-3/8 to 2-1/2, or larger, may
be used for this application.
SPECIFICATIONS
PAGE B14-5
HOW TO ORDER/NOMENCLATUE
PAGE B14-8
B14-14
DIMENSIONS
PAGE B14-30


XP

the dynamic capacity column on Table1 the C value equal to
or greater than the C value just calculated. The bore size on the
far left represents the proper bore size selection. Check that the
application RPM does not exceed the MAX. RPM from Table 1.
selection.
SELECTING BEARINGS
SUPPORTING COMBINATION RADIAL AND THRUST
LOADS
Bearings. IMPERIAL bearings are designed to allow a maximum

load and radial load to an equivalent radial load having the
magnitude.
Where:
P
FR

FA
e
X
Y
IMPERIAL spherical roller bearings are lubricated at the factory

with Mobil Grease XHP 222 - lithium complex grease. This
grease will adequately handle low and medium speeds with
low and medium loads at normal temperatures on Table 10 on
page B4-29. For very low and high speeds, for heavy loads,
and for low and high temperatures, special greases may be
used. Contact DODGE Application Engineering (864-284-5700),
The only maintenance requirement for DODGE Spherical roller
bearings is periodic relubrication at regular intervals as outlined

= Radial load, lbs. (see Table 1 for allowable slip fit
maximum load)
IMPERIAL

selected bore size. Determine X and Y from Table1 on page
hours life desired in the easy selection.
The DODGE Bearing Evaluation and Selection Technique (BEST) is a menu driven computer program that calculates bearing
loads, fatigue life and operating temperature for a two bearing shaft system based on user supplied input parameters. This
interactive program is available at www.ptwizard.com under the Product Selection area.
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-15
S-2000
16667
UNISPHERE II
0.3
DIMENSIONS
PAGE B14-30
UNIFIED SAF
C=
L10 X RPM
Bearing Reference
Guide

LOADS
ALTERNATE METHOD A - SELECTING A BEARING FOR AN

L10 LIFE VALUE NOT SHOWN IN THE EASY SELECTION
CHART.
E-Family Roller
Bearings
IMPERIAL-IP, ISAF, HD, ISN, ISNX
Specialty Tapered
Products
SELECTION
Bearing Reference
Guide
SELECTION
IMPERIAL-ISNX
E-Family Roller
Bearings

selected bore size. Determine X and Y from Table3 on page
hours life desired in the easy selection on page B4-17.

LOADS
Specialty Tapered
Products

S-2000
IMPERIAL spherical roller bearings are lubricated at the factory

with Mobil Grease XHP 222 - lithium complex grease. This
grease will adequately handle low and medium speeds with
low and medium loads at normal temperatures on Table 10 on
page B4-29. For very low and high speeds, for heavy loads,
and for low and high temperatures, special greases may be
used. Contact DODGE Application Engineering (864-284-5700),
The only maintenance requirement for DODGE Spherical roller
bearings is periodic relubrication at regular intervals as outlined
Bearings. IMPERIAL bearings are designed to allow a maximum
Lubrication Guide for Hydraulic ISAF/ISNX

Bore
(in)
5-7/16 - 5-1/2
5-15/16 - 7
8-9
10 - 12-1/2
14 - 15
Lubrication Guide in Months

1 - 250
251 - 500
501 - 750
rpm
rpm
rpm
1.50
1
0.50
1
0.50
0.50
1
1
0.50
1
0.50
.....
0.50
0.25
.....
Based on 12 hrs/day, 150 F Max
Continuous operation, 24 h/d, decrease by 50%
751-1000
rpm
0.25
0.25
.....
.....
.....
UNISPHERE II
Lubrication Guide for Imperial/ISAF/ISN

Shaft Size.
(Inches)
IMPERIAL
1-1/8 to 2
2-3/16 to 2-1/4
2-3/8 to 3
3-3/16 to 3-1/2
3-11/16 to 4-1/2
4-15/16 to 5-1/2
5-15/16 to 6
6-7/16 to 7
250
4
3.50
3
2.50
2
1.50
1
1
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
Re-Lubrication Intervals (Months) Based on 12 hours per day, 150F M

RPM
500
750
1000
1250
1500
3
2
2
1
0.50
2.50
1.50
1
0.50
0.50
2
1.50
1
0.50
0.25
1.50
1
0.50
0.25
0.25
1.50
1
0.50
0.25
0.25
1
0.50
0.25
0.25
0.25
0.50
0.50
0.25
0.25
0.25
0.50
0.25
0.25
0.25
-
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-16
2000
0.25
0.25
0.25
0.25
0.25
-
2500
0.25
0.25
0.25
0.25
-
DIMENSIONS
PAGE B14-30
>3000
0.25
0.25
0.25
-
1-1/8
1-3/16
1-1/4
22208
0.28
1.0
2.4
0.67
3.6
1-3/8
1-7/16
1-1/2
1-1/2 **
1-5/8
22209
0.26
1.0
2.6
0.67
3.9
1-11/16
1-3/4
1-3/4 **
1-7/8
22210
0.24
1.0
2.8
0.67
4.2
1-15/16
2
2-3/16
22211
0.23
1.0
2.9
0.67
4.3
2-1/4
2-1/4 **
2-3/8
22213
0.24
1.0
2.8
0.67
4.2
2-7/16
2-1/2
2-11/16
2-3/4
22215
0.22
1.0
3.1
0.67
4.6
2-15/16
3
3-3/16
3-1/4
22218
0.23
1.0
2.9
0.67
4.3
3-7/16
3-1/2
3-11/16
3-15/16
22220
0.24
1.0
2.8
0.67
4.2
4
4-7/16
22222
0.25
1.0
2.7
0.67
4.0
4-1/2
4-15/16
22226
0.26
1.0
2.6
0.67
3.9
5
5-7/16
22228
0.25
1.0
2.7
0.67
4.0
5-1/2
5-15/16
22232
0.26
1.0
2.6
0.67
3.9
6
6-7/16
6-1/2
22236
0.25
1.0
2.7
0.67
4.0
6-15/16
7
* Maximum grease speed is dependent on load and ambient conditions, consult Dodge Engineering
** IMPERIAL - Type E Dimensional Housing
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
Adapter
Maximum
Thrust
Load
lbs.
Dynamic
Capacity
(C)
lbs.
Static
Capacity
(Co)
lbs.
Labyrinth
RPM
TRIDENT
RPM
620
20,800
21,000
6,000
3,975
7/32
700
20,800
22,000
5,600
3,725
7/32
775
22,000
24,000
5,300
3,520
17/64
930
27,000
29,000
4,500
3,000
7/32
1,360
39,000
47,500
3,800
2,400
5/16
1,570
41,500
53,000
3,400
2,250
15/64
2,430
65,500
81,500
2,600
1,825
3/8
3,100
83,000
104,000
2,200
1,530
3/8
3,930
104,000
132,000
2,000
1,325
3/8
5,610
146,000
196,000
1,800
1,175
3/8
6,419
166,000
236,000
1,700
1,100
3/8
8,630
220,000
315,000
1,500
975
3/8
10,437
260,000
375,000
1,300
845
3/8
PAGE B14-8
B14-17
Maximum Speed*
Maximum
ISAF
Expansion
Capability
Inches
S-2000
FA/FR>e
DIMENSIONS
PAGE B14-30
UNISPHERE II
FA/FR<e
IMPERIAL
Basic
Bearing
Description
UNIFIED SAF
Shaft
Size
Inches
Bearing Reference
Guide
Table 1: IMPERIAL Spherical Roller Bearing
E-Family Roller
Bearings
IMPERIAL - Spherical Roller Bearing
Specialty Tapered
Products
SELECTION
Bearing Reference
Guide
SELECTION
Table 2: Allowable Equivalent Radial Load Rating (lbs) at Various Revolutions per Minute
Size
Inches
L10
Life
Hours
50
E-Family Roller
Bearings
100
150
250
500
750
1,000 1,300 1,500 1,700 1,800 2,000 2,200 2,600 2,750 3,000 3,400 3,800 4,500 5,300 5600
6000
10,000 7498
6090
5393
4626
3758
3327
3052
2821
2703
2603
2559
2479
2409
2292
2253
2195
2114
2045
1944
1851
1820
1783
1-1/8 30,000 5393

to
40,000 4947
1-1/2 60,000 4380
4380
3878
3327
2703
2393
2195
2029
1944
1872
1840
1783
1733
1648
1621
1579
1521
1471
1398
1331
1309
1282
4018
3558
3052
2479
2195
2014
1861
1783
1717
1688
1636
1590
1512
1487
1448
1395
1349
1282
1221
1201
1176
3558
3150
2703
2195
1944
1783
1648
1579
1521
1495
1448
1408
1339
1316
1282
1235
1195
1136
1081
1064
1042
100,000 3758
3052
2703
2319
1883
1668
1530
1414
1355
1305
1282
1243
1208
1149
1129
1100
1060
1025
974
928
912
894
10,000 7,498 6,090 5,393 4,626 3,758 3,327 3,052 2,821 2,703 2,603 2,559 2,479 2,409 2,292 2,253 2,195 1,521
*1-1/2 30,000 5,393 4,380
1-5/8
40,000 4,947 4,018
1-11/16
1-3/4 60,000 4,380 3,558
100,000 3,758 3,052
3,878 3,327 2,703 2,393 2,195 2,029 1,944 1,872 1,840 1,783 1,733 1,648 1,621 1,579 1,521
1,471 1,398 1,331 1,309
3,558 3,052 2,479 2,195 2,014 1,861 1,783 1,717 1,688 1,636 1,590 1,512 1,487 1,448 1,395
1,349 1,282 1,221 1,201
3,150 2,703 2,195 1,944 1,783 1,648 1,579 1,521 1,495 1,448 1,407 1,339 1,316 1,282 1,235
1,195 1,136 1,081 1,063
2,703 2,319 1,883 1,668 1,530 1,414 1,355 1,305 1,282 1,243 1,208 1,148 1,129 1,100 1,060
1,025
10,000 7,930 6,441 5,704 4,893 3,975 3,519 3,228 2,984 2,859 2,753 2,706 2,622 2,548 2,424 2,383 2,322 1,608
Specialty Tapered
Products
*1-3/4 30,000 5,704 4,633

1-7/8
40,000 5,232 4,250
1-15/16
60,000 4,633 3,763
2
100,000 3,975 3,228
2,045 1,944 1,331 1,820
974
4,102 3,519 2,859 2,531 2,322 2,146 2,056 1,980 1,947 1,886 1,833 1,743 1,714 1,670 1,608
1,556 1,479 1,408
3,763 3,228 2,622 2,322 2,130 1,969 1,886 1,816 1,786 1,730 1,681 1,599 1,572 1,532 1,475
1,427 1,356 1,291
3,332 2,859 2,322 2,056 1,886 1,743 1,670 1,608 1,581 1,532 1,489 1,416 1,392 1,356 1,306
1,264 1,201 1,144
2,859 2,452 1,992 1,764 1,618 1,496 1,433 1,380 1,356 1,314 1,277 1,215 1,194 1,164 1,121
1,084 1,030
10,000 9,733 7,905 7,000 6,005 4,878 4,319 3,962 3,662 3,508 3,379 3,322 3,218 3,127 2,975 2,925 2,050
2,745 2,655 2,523
2-3/16 30,000 7,000 5,686 5,035 4,319 3,508 3,106 2,850 2,634 2,523 2,430 2,389 2,315 2,249 2,139 2,104 2,050
to 40,000 6,421 5,216 4,618 3,962 3,218 2,850 2,614 2,416 2,315 2,229 2,191 2,123 2,063 1,963 1,930 1,880
2-1/4 60,000 5,686 4,618 4,089 3,508 2,850 2,523 2,315 2,139 2,050 1,974 1,940 1,880 1,827 1,738 1,709 1,665
1,974 1,909 1,815
100,000 4,878 3,962 3,508 3,010 2,445 2,165 1,986 1,835 1,758 1,694 1,665 1,613 1,567 1,491 1,466 1,428
1,376 1,330 1,265
10,000 14058 11419 10111 8674
S-2000
*2-1/4 30,000 10111 8213

2-3/8
40,000 9275 7534
2-7/16
2-1/2 60,000 8213 6671
100,000 7046 5723
928
2,163 2,056 1,957
7046
6239
5723
5290
5068
4881
4798
4649
4518
4297
4225
4116
981
1,811 1,751 1,665

1,603 1,551 1,474
3964
3834
7272
6239
5068
4487
4116
3805
3645
3510
3451
3343
3249
3090
3039
2960
2851
2758
6671
5723
4649
4116
3776
3490
3343
3220
3165
3067
2980
2835
2787
2716
2616
2530
5907
5068
4116
3645
3343
3090
2960
2851
2803
2716
2639
2510
2468
2405
2316
2240
5068
4348
3531
3127
2868
2651
2540
2446
2405
2330
2264
2153
2118
2063
1987
1922
10,000 14,959 12,151 10,759 9,230 7,497 6,639 6,090 5,629 5,392 5,194 5,105 4,946 3,457
4,572 4,496 4,380 4,219
2-11/16 30,000 10,759 8,739 7,738 6,639 5,392 4,775 4,380 4,048 3,878 3,735 3,672 3,558 3,457
40,000 9,870 8,017 7,098 6,090 4,946 4,380 4,018 3,714 3,558 3,427 3,368 3,263 3,171
to
3
60,000 8,739 7,098 6,285 5,392 4,380 3,878 3,558 3,288 3,150 3,034 2,982 2,890 2,808
3,288 3,233 3,150 3,034
100,000 7,497 6,090 5,392 4,626 3,758 3,327 3,052 2,821 2,703 2,603 2,559 2,479 2,409
2,291 2,253 2,195 2,114
3,016 2,966 2,890 2,783

2,671 2,626 2,559 2,464
UNISPHERE II
10,000 23,611 19,178 16,981 14,569 11,833 10,478 9,612 8,884 8,511 8,197 5,795
7,807 7,587 7,216
3-3/16 30,000 16,981 13,793 12,213 10,478 8,511 7,536 6,913 6,390 6,121 5,896 5,795
to
40,000 15,577 12,653 11,203 9,612 7,807 6,913 6,341 5,861 5,615 5,408 5,316
3-1/2 60,000 13,793 11,203 9,920 8,511 6,913 6,121 5,615 5,190 4,972 4,789 4,707
5,151 5,006 4,761

4,561 4,432 4,216
100,000 11,833 9,612 8,511 7,302 5,931 5,251 4,817 4,453 4,266 4,108 4,038
3,913 3,803 3,617
5,615 5,457 5,190
For applications in the dark shaded area, the maximum load for the specific speed is shown. The load does not correspond to the L10 shown at the left.
Applications in the light shaded area may require a high temperature lubrication, consult Dodge Engineering at (864) 297-4800
* IMPERIAL - Type E Dimensional Housing
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-18
DIMENSIONS
PAGE B14-30
912
Bearing Reference
Guide
SELECTION
Table 2: Allowable Equivalent Radial Load Rating (lbs) at Various Revolutions per Minute (continued)
Size
Inches
L10
Life
Hours
50
100
150
250
500
750
1,000 1,300 1,500 1,700 1,800 2,000 2,200 2,600 2,750 3,000 3,400 3,800 4,500 5,300 5600
6000
10,000 29,919 24,302 21,518 18,461 14,995 13,278 12,180 11,258 7,757 10,387 10,211 9,893 9,614
7,471 7,344 7,115 6,915
6,068 5,965 5,779 5,616
100,000 14,995 12,180 10,785 9,252 7,515 6,655 6,104 5,642 5,405
5,206 5,117 4,958 4,818
E-Family Roller
Bearings
3-11/16 30,000 21,518 17,478 15,476 13,278 10,785 9,549 8,760 8,097 7,757
to
40,000 19,739 16,033 14,197 12,180 9,893 8,760 8,036 7,427 7,115
4
60,000 17,478 14,197 12,571 10,785 8,760 7,757 7,115 6,577 6,300
6,853 6,737 6,527 6,343
10,000 37,489 30,450 26,963 23,132 18,789 16,637 15,261 10,145 13,513 13,015 12,794 12,396
4-7/16 30,000 26,963 21,901 19,392 16,637 13,513 11,966 10,976 10,145 9,719 9,361 9,202 8,915
to
40,000 24,733 20,090 17,789 15,261 12,396 10,976 10,069 9,307 8,915 8,587 8,441 8,178
4-1/2 60,000 21,901 17,789 15,751 13,513 10,976 9,719 8,915 8,241 7,894 7,603 7,474 7,242
100,000 18,789 15,261 13,513 11,593 9,417 8,338 7,649 7,070
6,773 6,523 6,412 6,213
10,000 52,628 42,747 37,851 32,473 26,377 23,356 15,409 19,803 18,971 18,272 17,961
Specialty Tapered
Products
4-15/16 30,000 37,851 30,745 27,224 23,356 18,971 16,798 15,409 14,243 13,644 13,141 12,918
40,000 34,722 28,203 24,973 21,424 17,402 15,409 14,135 13,065 12,516 12,055 11,850
to
5
60,000 30,745 24,973 22,112 18,971 15,409 13,644 12,516 11,569 11,082 10,674 10,493
100,000 26,377 21,424 18,971 16,275 13,220 11,706 10,738 9,925 9,508 9,157 9,002
10,000 59,838 48,603 43,037 36,922 29,990 26,555 17,520 22,516 21,569 20,775
5-7/16 30,000 43,037 34,957 30,953 26,555 21,569 19,099 17,520 16,194 15,513 14,942
to
40,000 39,478 32,066 28,394 24,359 19,786 17,520 16,071 14,855 14,230 13,706
5-1/2 60,000 34,957 28,394 25,142 21,569 17,520 15,513 14,230 13,153 12,601 12,136
100,000 29,990 24,359 21,569 18,505 15,031 13,309 12,209 11,284 10,810 10,412
10,000 79,303 64,414 57,036 48,933 39,746 25,312 32,283 29,840 28,586
S-2000
5-15/16 30,000 57,036 46,328 41,022 35,193 28,586 25,312 23,219 21,462 20,560
to
40,000 52,320 42,497 37,630 32,283 26,222 23,219 21,299 19,687 18,860
6
60,000 46,328 37,630 33,320 28,586 23,219 20,560 18,860 17,432 16,700
100,000 39,746 32,283 28,586 24,524 19,920 17,638 16,180 14,955 14,327
10,000 93,722 76,126 67,407 57,829 46,972 29,914 38,153 35,265
6-7/16 30,000 67,407 54,751 48,480 41,592 33,783 29,914 27,441 25,364
to
40,000 61,833 50,224 44,472 38,153 30,990 27,441 25,172 23,266
7
60,000 54,751 44,472 39,378 33,783 27,441 24,298 22,289 20,602
100,000 46,972 38,153 33,783 28,983 23,542 20,845 19,122 17,675
UNISPHERE II
For applications in the dark shaded area, the maximum load for the specific speed is shown. The load does not correspond to the L 10 shown at the left.
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-19
DIMENSIONS
PAGE B14-30
UNIFIED SAF
IMPERIAL
Applications in the light shaded area may require a high temperature lubrication, consult Dodge Engineering at (864) 284-5700.
Bearing Reference
Guide
SELECTION
Table 3: ISAF Pillow Block Hydraulic - Spherical Roller Bearings

Shaft Size
Adapter
Mounted
Inches
FA/FR e
Bearing
Series
FA/FR >e
Y
Adapter
Maximum
Allowable
Thrust Load
lbs.
Dynamic
Static
Capacity (C) Capacity (CO)
lbs.
lbs.
Maximum
RPM
E-Family Roller
Bearings
22200K Series
Specialty Tapered
Products
5-7/16
5-1/2
140mm
5-15/16
6
150mm
6-7/16
6-1/2
160mm
6-15/16
7
170mm
7-1/2
7-15/16
8
200mm
22232K
.26
2.60
0.67
3.90
8630
260,000
315,000
1500
22234K
.26
2.60
0.67
3.90
9858
300,000
355,000
1300
22236K
.25
2.70
0.67
4.00
10437
308,000
375,000
1300
22238K
0.28
2.40
0.67
3.60
11786
270,000
415,000
1200
22244K
.29
2.30
0.67
3.50
16020
365,000
550,000
950
23000K Series
S-2000
UNISPHERE II
8-7/16
8-1/2
8-15/16
9
220mm
9-15/16
10
10-7/16
10-1/2
260mm
10-15/16
11
280mm
12-7/16
12-1/2
320mm
13-15/16
14
360mm
15
150mm
23048K
.25
2.70
0.67
4.10
14887
260,000
490,000
800
23056K
.25
2.70
0.67
4.10
20000
345,000
670,000
850
23060K
.25
2.70
.67
4.00
23875
440,000
820,000
630
23068K
.25
2.70
.67
4.00
30498
530,000
1,020,000
560
23076K
.24
2.80
.67
4.20
34598
570,000
1,190,000
500
23080K
.24
2.80
4.10
39926
680,000
1,390,000
450
23134K
.28
2.40
.67
23100K Series
.67
3.50
10090
232,000
375,000
1300
160mm
23136K
.29
2.30
.67
3.50
11650
270,000
430,000
1200
170mm
23138K
.30
2.30
.67
3.40
13320
305,000
490,000
1100
IMPERIAL
180mm
23140K
.35
2.00
.67
2.90
15100
300,000
510,000
900
200mm
23144K
.33
2.00
.67
3.00
17800
365,000
655,000
800
220mm
9-7/16
9-1/2
240mm
10-7/16
10-1/2
260mm
23148K
.33
2.10
.67
3.10
20710
415,000
735,000
750
23152K
.33
2.00
.67
3.00
19985
490,000
900,000
670
23156K
.32
2.10
.67
3.20
27571
530,000
980,000
630
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-20
DIMENSIONS
PAGE B14-30
Bearing Reference
Guide
SELECTION
Table 3: ISAF Pillow Block Hydraulic - Spherical Roller Bearings (Continued)

Bearing
Series
FA/FR >e
Y
Dynamic
Static
Capacity (C) Capacity (CO)
lbs.
lbs.
Maximum
RPM
32373
600,000
1,110,000
600
37984
720,000
1,340,000
530
43568
830,000
1,560,000
500
45617
850,000
1,660,000
480
49719
915,000
1,830,000
450
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-21
DIMENSIONS
PAGE B14-30
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
10-15/16
11
23160K
.33
1
2.10
.67
3.10
280mm
11-15/16
12
23164K
.34
1
2.00
.67
2.90
300mm
12-7/16
12-1/2
23168K
.34
1
2.00
.67
2.90
320mm
13-7/16
13-1/2
23172K
.33
1
2.10
.67
3.10
340mm
13-15/16
14
23176K
.32
1
2.10
.67
3.20
360mm
If the thrust load exceeds adapter maximum allowable thrust load, auxiliary methods or carrying thrust are required
23100K series bearings will be provided with metric housing only
Adapter
Maximum
Allowable
Thrust Load
lbs.
E-Family Roller
Bearings
FA/FR e
Specialty Tapered
Products
Shaft Size
Adapter
Mounted
Inches
Bearing Reference
Guide
SELECTION
Table 4: ISAF Large-Bore Hydraulic Assist Spherical Roller Bearings Selection Table
Shaft
Size
Housing
Designation
Bearing
Series
Max
RPM
Grease
Life
Allowable Equivalent Radial Load Rating (lbs.) At Various RPM
L10
Hours
50
10,000
30,000
60,000
10,000
30,000
60,000
10,000
30,000
60,000
10,000
30,000
60,000
93.722
67.407
54.751
108,140
77,777
63,175
109,943
79,073
64,227
97,326
69,999
56,857
10,000
30,000
60,000
131,571
94,629
76,862
100
150
200
250
300
400
500
76,126
54,751
44,472
87,837
63,175
51,314
89,301
64,227
52,169
79,053
56,857
46,182
67,407
48,480
39,378
77,777
55,939
45,437
79,073
56,871
46,194
69,999
50,345
40,893
61,833
44,472
36,122
71,346
51,314
41,680
72,535
52,169
42,374
64,211
46,182
37,512
57,829
41,592
33,783
66,726
47,991
38,981
67,838
48,791
39,631
60,054
43,192
35,083
54,751
39,378
31,985
63,175
45,437
36,906
64,227
46,194
37,521
56,857
40,893
33,215
50,224
36,122
29,340
57,591
41,680
33,854
58,917
42,374
34,419
52,156
37,512
30,469
46,972
33,783
27,441
54,199
38,981
31,662
55,102
39,631
32,190
48,779
35,083
28,496
106,869
76,862
62,432
94,629
68,059
55,281
86,804
62,432
50,710
81,184
58,389
47,427
76,862
55,281
44,902
70,507
50,710
41,190
65,942
47,427
38,522
22200K Series
E-Family Roller
Bearings
Specialty Tapered
Products
5-7/16
5-1/2
140mm
5-15/16
6
150mm
6-7/16
6-1/2
160mm
6-15/16
7
170mm
7-1/2
7-15/16
8
200mm
532
22232K
1500
534
22234K
1300
536
22236K
1300
538
22238K
1200
544
22244K
950
23000K Series
S-2000
UNISPHERE II
8-7/16
8-1/2
8-15/16
9
220mm
9-15/16
10
10-7/16
10-1/2
260mm
10-15/16
11
280mm
12-7/16
12-1/2
320mm
13-15/16
14
360mm
15
380mm
048
23048K
800
10,000
30,000
60,000
93,722
67,407
54,751
76,126
54,751
44,472
67,407
48,480
39,378
61,833
44,472
36,122
57,829
41,592
33,783
54,751
39,378
31,985
50,224
36,122
29,340
46,972
33,783
27,441
056
23056K
850
10,000
30,000
60,000
124,361
89,444
72,651
101,013
72,651
59,011
89,444
64,330
52,252
82,048
59,010
47,932
76,735
55,190
44,828
72,650
52,252
42,441
66,644
47,932
38,932
62,328
44,828
36,412
060
23060K
630
068
23068K
560
23076K
500
080
23080K
450
97,865
84,995
79,491
117,883
102,380
94,751
126,780
110,107
102,977
151,246
131,355
122,850
79,491
69,037
64,567
96,751
83,158
77,774
102,977
89,435
83,643
122,850
106.694
99,785
70,387
61,130
57,172
84,784
73,634
68,866
91,183
79,191
74,064
108,780
94,474
88,357
64,567
56,076
52,445
77,774
67,546
63,172
83,643
72,643
67,940
99,785
86,662
81,051
60,386
52,445
49,049
72,738
63,172
59,081
78,227
67,940
63,540
93,324
81,051
75,803
57,172
49,653
46,438
68,866
59,809
55,937
74,064
64,323
60,158
88,357
76,737
71,768
52,445
45,548
42,598
63,172
54,864
51,312
67,940
59,005
55,184
81,051
70,392
65,834
49,049
42,598
39,840
59,081
51,312
47,989
0076
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
51,603
44,815
41,914
60,054
52,156
48,779
67,838
58,917
55,102
66,726
57,951
54,199
37,113
32,232
30,145
43,192
37,512
35,083
48,791
42,374
39,630
47,991
41,680
38,981
34,044
29,567
27,653
39,621
34,410
32,182
44,757
38,871
36,354
44,023
38,233
35,758
31,840
27,653
25,862
37,055
32,182
30,098
41,859
36,354
34,000
41,172
35,758
33,442
30,145
26,181
24,485
35,083
30,469
28,496
39,631
34,419
32,190
38,981
33,854
31,662
27,653
24,016
22,461
32,182
27,950
26,140
36,354
31,573
29,528
35,758
31,055
29,044
25,862
22,461
21,007
30,098
26,140
24,447
34,000
29,528
27,616
33,442
29,044
27,164
23100K Series
IMPERIAL
150mm
3134
23134K
1300
160mm
3136
23136K
1200
170mm
3138
23138K
1100
180mm
3140
23140K
900
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
41,914
36,401
34,044
48,779
42,364
39,621
55,102
47,855
44,757
54,199
47,071
44,023
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-22
DIMENSIONS
PAGE B14-30
Bearing Reference
Guide
Table 4: ISAF Large-Bore Hydraulic Assist Spherical Roller Bearings Selection Table (Continued)
Shaft
Size
Housing
Designation
Bearing
Series
Max
RPM
Grease
Life

L10
Hours
550
10,000
30,000
60,000
10,000
30,000
60,000
10,000
30,000
60,000
10,000
30,000
60,000
45,648
32,831
26,667
52,671
37,882
30,770
53,549
38,513
31,283
47,404
34,094
27,693
10,000
30,000
60,000
64,083
46,090
37,427
600
650
700
750
950
1300
1500
44,472
31,985
25,980
51,314
36,906
29,977
52,169
37,521
30,477
46,182
33,215
26,979
43,417
31,226
25,364
50,096
36,030
29,266
50,931
36,631
29,753
45,087
32,427
26,339
42,462
30,540
24,806
48,995
35,238
28,622
49,811
35,825
29,099
44,095
31,714
25,760
41,592
29,914
24,298
47,991
34,518
28,036
48,791
35,092
28,503
43,192
31,065
25,232
38,745
27,866
22,364
44,706
32,153
26,117
45,451
32,689
26,552
40,235
28,938
23,505
35,265
25,364
20,602
40,691
29,266
23,771
41,369
29,753
24,167
36,622
26,339
21,394
33,783
24,298
19,736
62,432
44,902
36,472
60,950
43,837
35,607
59,610
42,873
34,824
58,389
41,995
34,110
54,392
39,120
31,775
38,745
27,866
22,634
22200K Series
5-7/16
5-1/2
140mm
5-15/16
6
150mm
6-7/16
6-1/2
160mm
6-15/16
7
170mm
7-1/2
7-15/16
8
200mm
532
22232K
1500
534
22234K
1300
536
22236K
1300
538
22238K
1200
544
22244K
950
23048K
800
10,000
30,000
60,000
45,648
32,831
26,667
44,472
31,985
25,980
43,417
31,226
25,364
42,462
30,540
24,806
41,592
29,914
24,298
056
23056K
850
10,000
30,000
60,000
60,571
43,564
35,385
59,010
42,442
34,474
57,610
41,435
33,356
56,344
40,524
32,916
55,190
39,694
32,241
060
23060K
630
45,336
39,374
36,284
23068K
560
47,666
41,397
38,717
57,416
49,665
46,636
46,438
40,331
37,719
068
076
23076K
500
080
23080K
450
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
25,133
21,828
20,414
29,250
25,403
23,758
33,041
28,696
26,838
32,500
28,226
26,398
23,379
20,304
18,990
27,208
23,630
22,100
30,735
26,693
24,965
30,231
26,256
24,556
22,900
19,888
18,601
26,651
23,146
21,647
30,106
26,146
24,453
29,612
25,718
24,052
UNISPHERE II
15
380mm
048
S-2000
23000K Series
8-7/16
8-1/2
8-15/16
9
220mm
9-15/16
10
10-7/16
10-1/2
260mm
10-15/16
11
280mm
12-7/16
12-1/2
320mm
13-15/16
14
360mm
E-Family Roller
Bearings
Specialty Tapered
Products
SELECTION
3134
23134K
1300
160mm
3136
23136K
1200
170mm
3138
23138K
1100
180mm
3140
23140K
900
FEATURES/BENEFITS
PAGE B14-2
24,485
21,265
19,888
28,496
24,748
23,146
32,190
27,957
26,146
31,662
27,498
25,718
SPECIFICATIONS
PAGE B14-5
23,905
20,761
19,417
27,820
24,161
22,597
31,426
27,293
25,526
30,911
26,846
25,108
PAGE B14-8
B14-23
21,332
18,527
17,327
24,826
21,561
20,165
28,045
24,356
22,779
27,585
23,957
22,406
19,416
16,863
15,771
22,597
19,625
18,354
25,526
22,169
20,734
DIMENSIONS
PAGE B14-30
UNIFIED SAF
150mm
IMPERIAL
23100K Series
Bearing Reference
Guide
SELECTION
Shaft
Size
Housing
Designation
Bearing
Series
Max
RPM
Grease
Life
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
L10
Hours
50
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
60,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
81,184
70,507
65,942
92,305
80,165
74,975
108,992
94,658
88,529
117,883
102,380
95,751
133,452
115,902
108,397
160,143
139,082
130,076
184,609
160,331
149,949
189,058
164,194
153,562
203,515
176,750
165,306
100
150
200
250
300
400
500
53,561
46,517
43,505
60,898
52,889
49,465
71,908
62,451
58,407
77,774
67,546
63,172
88,046
76,467
71,515
105,655
91,760
85,818
121,797
105,779
96,930
124,732
108,326
101,313
134,270
116,612
109,061
50,093
43,505
40,688
56,955
49,465
46,262
67,252
58,407
54,625
72,738
63,172
59,061
82,345
71,515
66,885
98,814
85,818
60,262
113,910
98,930
92,524
116,655
101,313
94,753
125,576
109,061
101,999
47,427
41,190
38,522
53,923
46,832
43,799
63,672
55,299
51,718
68,866
59,809
55,937
77,962
67,709
63,325
93,554
81,251
75,989
107,847
93,664
87,599
110,446
95,921
69,710
118,892
103,256
96,570
43,505
37,784
35,337
49,465
42,960
40,178
58,407
50,726
47,442
63,172
54,864
51,312
71,515
62,110
58,089
85,818
74,532
69,706
98,930
65,919
80,356
101,313
87,990
82,292
109,061
94,718
88,585
40,688
35,337
33,049
46,262
40,178
37,576
54,625
47,442
44,370
59,081
51,312
47,989
66,885
58,089
54,327
80,262
69,706
65,193
92,524
80,356
75,153
94,753
62,292
76,964
101,999
88,585
82,649
23100K Series (Continued)

200mm
3144
23144K
800
220mm
3148
23148K
750
3152
23152K
670
3156
23156K
630
3160
23160K
600
3164
23164K
530
3168
23168K
500
3172
23172K
480
3176
23176K
450
9-7/16"
9-1/2
240mm
10-7/16"
10-1/2"
260mm
10-15/16"
11
280mm
11-15/16"
12"
300mm
12-7/16"
12-1/2"
320mm
13-7/16"
13-1/2
340mm
13-15/16"
14
360mm
65,942
57,269
53,561
74,975
65,115
60,898
88,529
76,886
71,908
95,751
83,158
77,774
108,397
94,142
88,046
130,076
112,970
105,655
149,949
130,229
121,797
153,562
133,367
124,732
165,306
143,566
134,270
58,389
50,710
47,427
66,388
57,657
53,923
78,390
68,080
63,672
84,784
73,634
66,866
95,982
83,359
77,962
115,178
100,031
93,554
132,775
115,314
107,847
135,975
118,092
110,446
146,373
127,123
118,892
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-24
DIMENSIONS
PAGE B14-30
Bearing Reference
Guide
SELECTION
Shaft
Size
Housing
Designation
Bearing
Series
Max
RPM
Grease
Life
L10
Hours
550
600
650
700
750
36,782
31,944
29,876
41,820
36,320
33,968
49,381
42,886
40,110
53,409
46,385
43,381
60,463
52,511
49,111
36,028
31,290
29,264
40,963
35,576
33,273
48,369
42,008
39,288
52,315
45,435
42,493
59,224
51,436
46,105
950
1300
23144K
800
220mm
3148
23148K
750
3152
23152K
670
3156
23156K
630
3160
23160K
600
3164
23164K
530
3168
23168K
500
3172
23172K
480
3176
23176K
450
38,522
33,456
31,290
43,799
38,039
35,576
51,718
44,916
42,008
55,937
48,580
45,435
63,325
54,997
51,436
75,989
65,996
61,723
67,599
76,079
71,152
89,710
77,912
72,667
37,608
32,662
30,548
42,760
37,137
34,732
50,491
43,851
41,011
54,609
47,426
44,357
61,822
53,692
50,215
74,186
64,430
60,258
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-25
DIMENSIONS
PAGE B14-30
UNIFIED SAF
IMPERIAL
UNISPHERE II
9-7/16"
9-1/2
240mm
10-7/16
10-1/2
260mm
10-15/16
11
280mm
11-15/16"
12
300mm
12-7/16"
12-1/2
320mm
13-7/16"
13-1/2"
340mm
13-15/16
14
360mm
39,541
34,341
32,117
44,958
39,045
36,517
53,086
46,104
43,119
57,416
49,865
46,636
64,999
56,451
52,796
77,999
67,741
63,355
89,916
78,091
73,034
92,062
79,972
74,794
99,124
86,086
80,514
Specialty Tapered
Products
3144
S-2000
200mm
E-Family Roller
Bearings
23100K Series (Continued)

50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
60,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
1500
Bearing Reference
Guide
SELECTION
IMPERIAL - IP Spherical Roller Bearings
120
180
150
E-Family Roller
Bearings
Table 5: IMPERIAL-IP 2-Bolt Pillow Block Housing Ratings*

Bore Size
Specialty Tapered
Products
1-1/8 to 1-1/2
1-5/8 to 1-3/4
1-7/8 to 2
2-3/16 to 2-1/4
2-3/8 to 2-1/2
2-11/16 to 3
3-3/16 to 3-1/2
3-11/16 to 4
120
2110
2380
3130
3330
3330
4420
4620
7500

150
2640
2980
3910
4160
4160
5520
5780
9350
180
3100
3500
4600
4900
4900
6500
6800
11000
Table 6: IMPERIAL-IP 4-Bolt Pillow Housing Ratings*

Bore Size
S-2000
2-3/8 to 2-1/2
2-11/16 to 3
3-3/16 to 3-1/2
3-11/16 to 4
4-7/16 to 4-1/2
4-15/16 to 5
120
3810
4620
4700
7500
9900
13400

150
4760
5780
5870
9350
12330
16750
180
5600
6800
6900
11000
14500
19700
120
Maximum Recommended Housing Cap Loads, kN

150
180
9.4
11.7
13.8
10.6
13.3
15.6
13.9
14.8
17.4
18.5
20.5
21.8
14.8
18.5
21.8
19.7
24.6
28.9
20.6
25.7
30.2
33.4
41.6
48.9
44
54.8
64.5
59.6
74.5
87.6
67.2
89.8
84.1
112.5
99.0
132.3
Table 7: IMPERIAL-ISN*
Bore Size
UNISPHERE II
507
508
509
510
511
512
513
515
516
517
518
519
520
522
524
526
528
530
532
IMPERIAL
UNIFIED SAF
*
1.
2.
3.
When utilizing heavy cap loads on pillow block housings; the installation must adhere to the following procedures:
The pillow block base bolts must be of high strength (Grade 8 or Class 10.9) bolts and properly tightened to mounting structure.
Stop bars (shear strips) should be used against the plummer block where side loads are encountered.
In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and life requirements.
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-26
DIMENSIONS
PAGE B14-30
Bearing Reference
Guide
SELECTION
Imperial-HD
E-Family Roller
Bearings
180
Table 8: Steel Housed Imperial - Housing Ratings*
Maximum Recommended Housing Loads, lb

P4B
1-1/8
1-3/16
1-1/4
22208
24400
1-3/8
1-7/16
1-1/2
1-1/2**
1-5/8
22209
26400
1-11/16
1-3/4
1-3/4**
1-15/16
22210
30200
2
2-3/16
22211
35400
2-1/4
2-1/4**
2-3/8
22213
51300
52800
2-7/16
2-1/2
2-11/16
2-3/4
22215
59700
60000
2-15/16
3
3-3/16
3-1/4
22218
90700
95500
3-7/16
3-1/2
3-11/16
3-15/16
22220
115000
4
4-7/16
22222
152100
4-1/2
4-15/16
22226
188200
5
* It is important to note that the values listed above are housing fracture loads from various applied directions. These loads may exceed

bearing, mounting bolt and/or shaft capacities. Applications subject to heavy housing loads, particularly shock loads, must adhere to the

following procedures:
(1) The pillow block base bolts must be of high strength (Grade 8) bolts and properly tightened to mounting structure.
(2) Stop bars (shear strips) should be used against the plummer block where side loads are encountered.
(3) In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and life requirements.,
** Imperial - Type E Dimensional Housing
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-27
DIMENSIONS
PAGE B14-30
Specialty Tapered
Products
P2B
S-2000
Basic Bearing Description
UNISPHERE II
Shaft Sizes
IMPERIAL
150
UNIFIED SAF
120
Bearing Reference
Guide
SELECTION
IMPERIAL - ISAF Spherical Roller Bearings
E-Family Roller
Bearings
Specialty Tapered
Products
Table 9: ISAF Housing Rating*
S-2000
UNISPHERE II
Maximum Recommended Housing

Cap Loads,
Lbs
180
1-1/8 thru 1-1/2
4,600
1-5/8 thru 1-3/4
5,400
1-7/8 thru 2
7,875
2-3/16 thru 2-1/4
9,200
2-3/8 thru 2-1/2
9,220
2-11/16 thru 3
10,200
3-3/8 thru 3-1/2
14,700
3-11/16 thru 4
17,800
4-7/16 thru 4-1/2
18,300
4-15/16 thru 5
22,300
5-7/16 thru 5-1/2
25,100
5-15/16 thru 6
30,200
6-7/16 thru 7
35,300
* When utilizing heavy cap loads on pillow block housings; the installation must adhere to the following procedures:
1. The pillow block base bolts must be of high strength (Grade 8) bolts and properly tightened to mounting
structure.
3. In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and

life requirements.
Shaft Size
(Inches)
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-28
DIMENSIONS
PAGE B14-30
Bearing Reference
Guide
SELECTION
IMPERIAL - ISAF Spherical Roller Bearings
Table 10: Definition Of Operating Conditions
For Unitized Spherical Roller Bearings
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-29
DIMENSIONS
PAGE B14-30
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
LOW TEMPERATURE
MEDIUM TEMPERATURE
HIGH TEMPERATURE
Specialty Tapered
Products
LIGHT LOAD
NORMAL LOAD
HEAVY LOAD
E-Family Roller
Bearings
UP TO 20% OF MAX. RPM (TABLE 1 AND/OR

TABLE 3)
UP TO 8% OF C (TABLE 1 AND/OR TABLE 3)
OVER 8% TO 18% OF C
OVER 18% OF C
C- DYNAMIC CAPACITY
20F TO -100F
OVER 20F TO 200F
OVER 200F TO 250F
LOW SPEED
MEDIUM SPEED
HIGH SPEED
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - IP Pillow Block
1-1/8 THRU 2-1/4 INCH - 2-BOLT
E-Family Roller
Bearings
G
F
J
Specialty Tapered
Products
M
H
D MIN
D MAX
B
S-2000

grease fitting
Y
MAX
Y
MAX
X
UNISPHERE II
Z
MIN
Z
MIN
A
IMPERIAL
UNIFIED SAF
EXPANSION
NON-EXPANSION
NOTE: See page B14-32 for 2-3/8 - 4 inch

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-30
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Min
Max
F
Bolt
Dia.
1 .95
4.81
5.20
1/2
0.81
1.13
3.88
2.72
1.88
0.88
1.75
3/16
0.02
1.80
7.38
2.06
5.31
5.70
1/2
0.81
1.25
4.27
3.00
2.13
0.81
2.00
1/4
0.02
2.08
2.86
8.38
2.50
6.06
6.44
5/8
0.95
1.31
4.56
3.28
2 .25
0.86
2.00
1/4
0.02
2.30
3.03
8.88
2.63
6.56
6 .94
5/8
0.95
1.50
5 .00
3 .50
2.50
0.91
2.13
1/4
0.03
2.60
2 .63
6.80
2.81
FEATURES/BENEFITS
PAGE B14-2
X
Total
Exp.
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-31
SELECTION
PAGE B14-14
S-2000
UNISPHERE II
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1- 5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2 -1/4
D
A
IMPERIAL
Shaft
Size
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069456
P2B-IP-102L
069484
P2B-IP-102LE
069457
P2B-IP-103L
069485
P2B-IP-103LE
069458
P2B-IP-104L
069486
P2B-IP-104LE
069459
P2B-IP-106L
069487
P2B-IP-106LE
069460
P2B-IP-107L
069488
P2B-IP-107LE
069461
P2B-IP-108L
069489
P2B-IP-108LE
069462
P2B-IP-110L
069490
P2B-IP-110LE
069463
P2B-IP-111L
069491
P2B-IP-111LE
069464
P2B-IP-112L
069492
P2B-IP-112LE
069465
P2B-IP-114L
069493
P2B-IP-114LE
069466
P2B-IP-115L
069494
P2B-IP-115LE
069467
P2B-IP-200L
069495
P2B-IP-200LE
069468
P2B-IP-203L
069496
P2B-IP-203LE
069469
P2B-IP-204L
069497
P2B-IP-204LE
UNIFIED SAF
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
1-1/8
069400
P2B-IP-102R
069428
P2B-IP-102RE
1-3/16
069401
P2B-IP-103R
069429
P2B-IP-103RE
1-1/4
069402
P2B-IP-104R
069430
P2B-IP-104RE
22208
1-3/8
069403
P2B-IP-106R
069431
P2B-IP-106RE
1-7/16
069404
P2B-IP-107R
069432
P2B-IP-107RE
1-1/2
069405
P2B-IP-108R
069433
P2B-IP-108RE
1- 5/8
069406
P2B-IP-110R
069434
P2B-IP-110RE
22209
1-11/16
069407
P2B-IP-111R
069435
P2B-IP-111RE
1-3/4
069408
P2B-IP-112R
069436
P2B-IP-112RE
1-7/8
069409
P2B-IP-114R
069437
P2B-IP-114RE
22210
1-15/16
069410
P2B-IP-115R
069438
P2B-IP-115RE
2
069411
P2B-IP-200R
069439
P2B-IP-200RE
2-3/16
069412
P2B-IP-203R
069440
P2B-IP-203RE
22211
2 -1/4
069413
P2B-IP-204R
069441
P2B-IP-204RE
Metric shaft sizes available upon request
Shaft
Size
Inch
Bearing
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
2-3/8 THRU 4 INCH - 2-BOLT
E-Family Roller
Bearings
G
F
J
Specialty Tapered
Products
M
H
D MIN
D MAX
B
S-2000

grease fitting
Y
MAX
Y
MAX
X
UNISPHERE II
Z
MIN
Z
MIN
A
IMPERIAL
EXPANSION
NON-EXPANSION
UNIFIED SAF
NOTE: See page B14-30 for 1-1/8 thru 2-1/4 inch

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-32
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Min
Max
F
Bolt
Dia.
X
Total
Exp.
3.42
9.25
2.86
6.94
7.31
5/8
0.95
1.63
5.59
3.88
2.75
1.20
2.22
1/4
0.03
2.94
3.50
10.44
3.08
7.94
8.31
3/4
1.06
1.88
6.38
4.28
3.25
1.23
2.27
1/4
0.03
3.47
4.17
13.00
3.42
9.38
10.63
7/8
1.63
2.25
7.50
5.00
3.75
1.48
2.69
1/4
0.03
4.05
4.70
15.25
3.91
10.63
12.80
2.25
2.44
8.38
5.56
4.25
1.64
3.06
5/16
0.03
4.50
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-33
SELECTION
PAGE B14-14
S-2000
UNISPHERE II
2-3/8
2 -7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-11/16
3-15/16
4
IMPERIAL
Shaft
Size
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069470
P2B-IP-206L
069498
P2B-IP-206LE
069471
P2B-IP-207L
069499
P2B-IP-207LE
069472
P2B-IP-208L
069500
P2B-IP-208LE
069473
P2B-IP-211L
069501
P2B-IP-211LE
069474
P2B-IP-212L
069502
P2B-IP-212LE
069475
P2B-IP-215L
069503
P2B-IP-215LE
069476
P2B-IP-300L
069504
P2B-IP-300LE
069477
P2B-IP-303L
069505
P2B-IP-303LE
069478
P2B-IP-304L
069506
P2B-IP-304LE
069479
P2B-IP-307L
069507
P2B-IP-307LE
069480
P2B-IP-308L
069508
P2B-IP-308LE
069481
P2B-IP-311L
069509
P2B-IP-311LE
069482
P2B-IP-315L
069510
P2B-IP-315LE
069483
P2B-IP-400L
069511
P2B-IP-400LE
UNIFIED SAF
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
2-3/8
069414
P2B-IP-206R
069442
P2B-IP-206RE
22213
2-7/16
069415
P2B-IP-207R
069443
P2B-IP-207RE
2-1/2
069416
P2B-IP-208R
069444
P2B-IP-208RE
2-11/16
069417
P2B-IP-211R
069445
P2B-IP-211RE
2-3/4
069418
P2B-IP-212R
069446
P2B-IP-212RE
22215
2-15/16
069419
P2B-IP-215R
069447
P2B-IP-215RE
3
069420
P2B-IP-300R
069448
P2B-IP-300RE
3-3/16
069421
P2B-IP-303R
069449
P2B-IP-303RE
3-1/4
069422
P2B-IP-304R
069450
P2B-IP-304RE
22218
3-7/16
069423
P2B-IP-307R
069451
P2B-IP-307RE
3-1/2
069424
P2B-IP-308R
069452
P2B-IP-308RE
3-11/16
069425
P2B-IP-311R
069453
P2B-IP-311RE
22220
3-15/16
069426
P2B-IP-315R
069454
P2B-IP-315RE
4
069427
P2B-IP-400R
069455
P2B-IP-400RE
Shaft
Size
Inch
Bearing
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - IP Pillow Block with Type E Dimensions
1-3/8 THRU 2-3/16 INCH 2-BOLT
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-34
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Shaft
Size
B#
C#
Min
Max
1-3/8
2.63
7.37
2.12
5.63
5.88
1-7/16
1-1/2
1-5/8
2.81
7.88
2.38
6.13
6.38
1-11/16
1-3/4
1-7/8
2.86
8.87
2.49
6.88
7.12
1-15/16
2
2-3/16
3.03
9.62
2.56
7.63
7.88

FEATURES/BENEFITS
PAGE B14-2
F
Bolt
Dia.
G#
H#
J#
X
Total
Exp.
1/2
0.75
1.13
3.85
2.72
1.875
1.04
1.59
5/32
0.02
1.80
1/2
0.75
1.25
4.25
3.00
2.125
0.98
1.83
3/16
0.02
2.08
5/8
0.88
1.31
4.47
3.28
2.250
1.10
1.76
7/32
0.02
2.30
5/8
0.88
1.50
5.00
3.50
2.500
1.06
1.97
1/4
0.03
2.60
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-35
SELECTION
PAGE B14-14
S-2000
UNISPHERE II
1- 3/8
1-7/16
1-1/2
22209
1-5/8
1-11/16
1-3/4
1-7/8
22210
1-15/16
2
22211
2-3/16
22208
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071162
EP2B-IP-106L
071183
EP2B-IP-106LE
071163
EP2B-IP-107L
071184
EP2B-IP-107LE
071164
EP2B-IP-108L
071185
EP2B-IP-108LE
071165
EP2B-IP-110L
071186
EP2B-IP-110LE
071166
EP2B-IP-111L
071187
EP2B-IP-111LE
071167
EP2B-IP-112L
071188
EP2B-IP-112LE
071168
EP2B-IP-114L
071189
EP2B-IP-114LE
071169
EP2B-IP-115L
071190
EP2B-IP-115LE
071170
EP2B-IP-200L
071191
EP2B-IP-200LE
071171
EP2B-IP-203L
071192
EP2B-IP-203LE
IMPERIAL
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071120
EP2B-IP-106R
071141
EP2B-IP-106RE
071121
EP2B-IP-107R
071142
EP2B-IP-107RE
071122
EP2B-IP-108R
071143
EP2B-IP-108RE
071123
EP2B-IP-110R
071144
EP2B-IP-110RE
071124
EP2B-IP-111R
071145
EP2B-IP-111RE
071125
EP2B-IP-112R
071146
EP2B-IP-112RE
071126
EP2B-IP-114R
071147
EP2B-IP-114RE
071127
EP2B-IP-115R
071148
EP2B-IP-115RE
071128
EP2B-IP-200R
071149
EP2B-IP-200RE
071129
EP2B-IP-203R
071150
EP2B-IP-203RE
Shaft
Size*
UNIFIED SAF
Bearing
Series
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-36
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Shaft
Size
B#
C#
Min
Max
F
Bolt
Dia.
2-1/4
2-7/16
3.42
10.50
2.87
8.38
8.62
5/8
2-1/2
2-11/16
2-3/4
3.50
12.00
2.99
9.31
9.69
3/4
2-15/16
3
3-3/16
3-1/4
4.17
14.00
3.49
10.81
11.19
7/8
3-7/16
3-1/2
Notes:
A And R Dimensions Do Not Include Y Dimension

FEATURES/BENEFITS
PAGE B14-2
G#
H#
J#
X
Total
Exp.
0.88
1.63
5.71
3.88
2.750
1.20
2.22
1/4
0.03
2.95
1.07
1.88
6.32
4.28
3.125
1.35
2.15
1/4
0.03
3.47
1.19
2.25
7.69
5.00
3.750
1.51
2.66
1/4
0.03
4.05
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-37
SELECTION
PAGE B14-14
S-2000
UNISPHERE II
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
22215
2-15/16
3
3-3/16
3-1/4
22218
3-7/16
3-1/2
22213
Labyrinth SEAL
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071172
EP2B-IP-204L
071193
EP2B-IP-204LE
071173
EP2B-IP-207L
071194
EP2B-IP-207LE
071174
EP2B-IP-208L
071195
EP2B-IP-208LE
071175
EP2B-IP-211L
071196
EP2B-IP-211LE
071176
EP2B-IP-212L
071197
EP2B-IP-212LE
071177
EP2B-IP-215L
071198
EP2B-IP-215LE
071178
EP2B-IP-300L
071199
EP2B-IP-300LE
071179
EP2B-IP-303L
071200
EP2B-IP-303LE
071180
EP2B-IP-304L
071201
EP2B-IP-304LE
071181
EP2B-IP-307L
071202
EP2B-IP-307LE
071182
EP2B-IP-308L
071203
EP2B-IP-308LE
IMPERIAL
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071130
EP2B-IP-204R
071151
EP2B-IP-204RE
071131
EP2B-IP-207R
071152
EP2B-IP-207RE
071132
EP2B-IP-208R
071153
EP2B-IP-208RE
071133
EP2B-IP-211R
071154
EP2B-IP-211RE
071134
EP2B-IP-212R
071155
EP2B-IP-212RE
071135
EP2B-IP-215R
071156
EP2B-IP-215RE
071136
EP2B-IP-300R
071157
EP2B-IP-300RE
071137
EP2B-IP-303R
071158
EP2B-IP-303RE
071138
EP2B-IP-304R
071159
EP2B-IP-304RE
071139
EP2B-IP-307R
071160
EP2B-IP-307RE
071140
EP2B-IP-308R
071161
EP2B-IP-308RE
Shaft
Size*
UNIFIED SAF
Bearing
Series
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
Steel IMPERIAL-HD Pillow Block 2-Bolt
E-Family Roller
Bearings
Specialty Tapered
Products
Dodge Non-Expansion
Shaft
Size
S-2000
UNISPHERE II
IMPERIAL
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
2-3/8
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-11/16
3-15/16
4
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
Part No.
071650
071651
071652
071653
071654
071655
071656
071657
071658
071659
071660
071661
071662
071663
071664
071665
071666
071667
071668
071669
071670
071671
071672
071673
071674
071675
071676
071677
Dodge Expansion
Description
SP2B-IP-102R
SP2B-IP-103R
SP2B-IP-104R
SP2B-IP-106R
SP2B-IP-107R
SP2B-IP-108R
SP2B-IP-110R
SP2B-IP-111R
SP2B-IP-112R
SP2B-IP-114R
SP2B-IP-115R
SP2B-IP-200R
SP2B-IP-203R
SP2B-IP-204R
SP2B-IP-206R
SP2B-IP-207R
SP2B-IP-208R
SP2B-IP-211R
SP2B-IP-212R
SP2B-IP-215R
SP2B-IP-300R
SP2B-IP-303R
SP2B-IP-304R
SP2B-IP-307R
SP2B-IP-308R
SP2B-IP-311R
SP2B-IP-315R
SP2B-IP-400R
Part No.
071678
071679
071680
071681
071682
071683
071684
071685
071686
071687
071688
071689
071690
071691
071692
071693
071694
071695
071696
071697
071698
071699
071700
071701
071702
071703
071704
071705
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-38
Description
SP2B-IP-102RE
SP2B-IP-103RE
SP2B-IP-104RE
SP2B-IP-106RE
SP2B-IP-107RE
SP2B-IP-108RE
SP2B-IP-110RE
SP2B-IP-111RE
SP2B-IP-112RE
SP2B-IP-114RE
SP2B-IP-115RE
SP2B-IP-200RE
SP2B-IP-203RE
SP2B-IP-204RE
SP2B-IP-206RE
SP2B-IP-207RE
SP2B-IP-208RE
SP2B-IP-211RE
SP2B-IP-212RE
SP2B-IP-215RE
SP2B-IP-300RE
SP2B-IP-303RE
SP2B-IP-304RE
SP2B-IP-307RE
SP2B-IP-308RE
SP2B-IP-311RE
SP2B-IP-315RE
SP2B-IP-400RE
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Min
1-1/8
1-3/16
1-1/4
2.63
6.88
2.25
4.69
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
2.81
7.13
2.37
5.25
1-3/4
1-7/8
1-15/16
2.86
8.38
2.44
5.93
2
2-3/16
3.03
8.88
2.50
6.50
2-1/4
2-3/8
2-7/16
3.42
9.25
2.90
6.81
2-1/2
2-11/16
2-3/4
3.50
10.44
2.91
7.70
2-15/16
3
3-3/16
3-1/4 3-7/16
4.17
13.00
3.41
9.25
3-1/2
3-11/16
3-15/16
4.70
14.25
3.89
10.04
4
FEATURES/BENEFITS
PAGE B14-2
Max
F
Bolt
Dia.
X
Total
Exp
6.00
1/2
1.28
1.13
3.88
2.72
1.875
0.86
1.77
3/16
0.02
1.80
5.75
1/2
0.88
1.25
4.27
3.00
2.125
0.92
1.89
1/4
0.02
2.08
6.36
5/8
0.97
1.31
4.56
3.28
2.25
0.90
1.96
1/4
0.02
2.30
7.06
5/8
1.04
1.50
5.00
3.50
2.50
0.99
2.04
1/4
0.03
2.59
7.43
5/8
1.07
1.63
5.60
3.88
2.75
1.17
2.25
1/4
0.03
2.94
8.40
3/4
1.23
1.88
6.38
4.28
3.25
1.12
2.37
1/4
0.03
3.47
10.75
7/8
1.75
2.25
7.50
5.00
3.75
1.53
2.63
1/4
0.03
4.05
12.60
2.40
2.44
8.37
5.56
4.25
1.70
3.00
5/16
0.03
4.50
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-39
SELECTION
PAGE B14-14
S-2000
UNISPHERE II
IMPERIAL
D
A
UNIFIED SAF
Shaft
Size
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
Steel IMPERIAL-HD Pillow Block 2-Bolt with Type E Dimensions
E-Family Roller
Bearings
G
F
J
Specialty Tapered
Products
M
H
D MIN
D MAX
S-2000
S
X
Y
MAX
CL HSG
CL HSG
UNISPHERE II
Z
MIN
A
R
L
IMPERIAL
C
NON-EXPANSION
EXPANSION
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-40
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
D
Min
1-3/8
2.63
6.88
2.25
4.69
1-7/16
1-1/2
1-5/8
2.81
7.88
2.38
5.7
1-11/16
1-3/4
1-7/8
2.86
8.88
2.44
6
1-15/16
2
2-3/16
3.03
9.63
2.50
6.50
2-1/4
2-7/16
3.42
10.25
2.9
6.88
2-1/2
2-11/16
2-3/4
3.50
11.63
2.91
7.88
2-15/16
3
3-3/16
3-1/4
4.17
13.5
3.41
9.38
3-7/16
3-1/2
FEATURES/BENEFITS
PAGE B14-2
Specialty Tapered
Products
Description
SEP2B-IP-106RE
SEP2B-IP-107RE
SEP2B-IP-108RE
SEP2B-IP-110RE
SEP2B-IP-111RE
SEP2B-IP-112RE
SEP2B-IP-114RE
SEP2B-IP-115RE
SEP2B-IP-200RE
SEP2B-IP-203RE
SEP2B-IP-204RE
SEP2B-IP-207RE
SEP2B-IP-208RE
SEP2B-IP-211RE
SEP2B-IP-212RE
SEP2B-IP-215RE
SEP2B-IP-300RE
SEP2B-IP-303RE
SEP2B-IP-304RE
SEP2B-IP-307RE
SEP2B-IP-308RE
S-2000
Part No.
071885
071886
071887
071888
071889
071890
071891
071892
071893
071894
071895
071896
071897
071898
071899
071900
071901
071902
071903
071904
071905
F
Bolt
Dia
X
Total
Exp
5.88
1/2
1.22
1.13
3.84
2.72
1.875
1.04
1.59
5/32
0.02
1.80
6.5
1/2
1.02
1.25
4.26
2.125
0.96
1.83
3/16
0.02
2.08
7.12
5/8
1.32
1.31
4.47
3.28
2.250
1.10
1.76
3/32
0.02
2.30
7.88
5/8
1.45
1.50
.00
3.50
2.500
1.06
1.97
1/4
0.03
2.60
8.62
5/8
1.63
1.63
5.71
3.88
2.75
1.2
2.22
1/4
0.03
2.95
9.62
3/4
1.75
1.88
6.32
4.28
3.125
1.35
2.15
1/4
0.03
3.47
11.25
7/8
1.94
2.25
7.69
3.75
1.51
2.66
1/4
0.03
4.05
Max
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-41
SELECTION
PAGE B14-14
UNISPHERE II
Dodge Expansion
Description
SEP2B-IP-106R
SEP2B-IP-107R
SEP2B-IP-108R
SEP2B-IP-110R
SEP2B-IP-111R
SEP2B-IP-112R
SEP2B-IP-114R
SEP2B-IP-115R
SEP2B-IP-200R
SEP2B-IP-203R
SEP2B-IP-204R
SEP2B-IP-207R
SEP2B-IP-208R
SEP2B-IP-211R
SEP2B-IP-212R
SEP2B-IP-215R
SEP2B-IP-300R
SEP2B-IP-303R
SEP2B-IP-304R
SEP2B-IP-307R
SEP2B-IP-308R
IMPERIAL
Shaft
Size
Part No.
071864
071865
071866
071867
071868
071869
071870
071871
071872
071873
071874
071875
071876
071877
071878
071879
071880
071881
071882
071883
071884
UNIFIED SAF
Dodge Non-Expansion
Shaft
Size
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS

G
E-Family Roller
Bearings
E
J
Specialty Tapered
Products
M
H

grease fitting
D
S-2000
B
Y
MAX
Y
MAX
S
X
UNISPHERE II
Z
MIN
Z
MIN
A
R
IMPERIAL
EXPANSION
NON-EXPANSION
UNIFIED SAF
NOTE: See page B14-44 for 3-11/16 thru 5 inch

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-42
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
2-3/8
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
Min
Max
F
Bolt
Dia.
X
Total
Exp.
3.42
9.25
3.28
6.94
7.31
1.75
1/2
0.81
1.63
5.59
3.88
2.75
1.08
2.34
1/4
0.03
2.94
3.50
10.44
3.75
7.94
8.31
1.88
5/8
0.94
1.88
6.44
4.28
3.25
1.09
2.41
1/4
0.03
3.47
4.17
13.00
4.13
9.38
10.63
2.00
3/4
1.50
2.25
7.56
5.00
3.75
1.44
2.73
1/4
0.03
4.05
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-43
SELECTION
PAGE B14-14
S-2000
UNISPHERE II
IMPERIAL
Shaft
Size
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069556
P4B-IP-206L
069574
P4B-IP-206LE
069557
P4B-IP-207L
069575
P4B-IP-207LE
069558
P4B-IP-208L
069576
P4B-IP-208LE
069559
P4B-IP-211L
069577
P4B-IP-211LE
069560
P4B-IP-212L
069578
P4B-IP-212LE
069561
P4B-IP-215L
069579
P4B-IP-215LE
069562
P4B-IP-300L
069580
P4B-IP-300LE
069563
P4B-IP-303L
069581
P4B-IP-303LE
069564
P4B-IP-304L
069582
P4B-IP-304LE
069565
P4B-IP-307L
069583
P4B-IP-307LE
069566
P4B-IP-308L
069584
P4B-IP-308LE
UNIFIED SAF
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
2-3/8
069520
P4B-IP-206R
069538
P4B-IP-206RE
22213
2-7/16
069521
P4B-IP-207R
069539
P4B-IP-207RE
2-1/2
069522
P4B-IP-208R
069540
P4B-IP-208RE
2-11/16
069523
P4B-IP-211R
069541
P4B-IP-211RE
2-3/4
069524
P4B-IP-212R
069542
P4B-IP-212RE
22215
2-15/16
069525
P4B-IP-215R
069543
P4B-IP-215RE
3
069526
P4B-IP-300R
069544
P4B-IP-300RE
3-3/16
069527
P4B-IP-303R
069545
P4B-IP-303RE
3-1/4
069528
P4B-IP-304R
069546
P4B-IP-304RE
22218
3-7/16
069529
P4B-IP-307R
069547
P4B-IP-307RE
3-1/2
069530
P4B-IP-308R
069548
P4B-IP-308RE
Shaft
Size
Inch
Bearing
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
G
E-Family Roller
Bearings
E
J
Specialty Tapered
Products
M
H

grease fitting
D
S-2000
B
Y
MAX
Y
MAX
S
X
UNISPHERE II
Z
MIN
Z
MIN
A
R
IMPERIAL
EXPANSION
NON-EXPANSION
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-44
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
3-11/16
3-15/16
4
4-7/16
4-1/2
4-15/16
5
C
Min
Max
F
Bolt
Dia.
X
Total
Exp.
4.70
15.25
4.50
12.13
12.88
2.25
3/4
1.25
2.44
8.44
5.56
4.25
1.64
3.06
5/16
0.03
4.50
5.23
16.50
4.75
12.00
14.00
2.50
3/4
1.38
2.75
9.63
6.44
4.75
1.75
3.48
3/8
0.04
5.00
5.98
18.63
5.38
15.00
16.00
2.75
7/8
1.50
3.00
11.13
7.63
5.50
1.91
4.08
3/8
0.04
5.84
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-45
SELECTION
PAGE B14-14
UNISPHERE II
IMPERIAL
Shaft
Size
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069567
P4B-IP-311L
069585
P4B-IP-311LE
069568
P4B-IP-315L
069586
P4B-IP-315LE
069569
P4B-IP-400L
069587
P4B-IP-400LE
069570
P4B-IP-407L
069588
P4B-IP-407LE
069571
P4B-IP-408L
069589
P4B-IP-408LE
069572
P4B-IP-415L
069590
P4B-IP-415LE
069573
P4B-IP-500L
069591
P4B-IP-500LE
UNIFIED SAF
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
3-11/16
069531
P4B-IP-311R
069549
P4B-IP-311RE
22220
3-15/16
069532
P4B-IP-315R
069550
P4B-IP-315RE
4
069533
P4B-IP-400R
069551
P4B-IP-400RE
4-7/16
069534
P4B-IP-407R
069552
P4B-IP-407RE
22222
4-1/2
069535
P4B-IP-408R
069553
P4B-IP-408RE
4-15/16
069536
P4B-IP-415R
069554
P4B-IP-415RE
22226
5
069537
P4B-IP-500R
069555
P4B-IP-500RE
Shaft
Size
Inch
Bearing
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
1/8-27 NPT
E-Family Roller
Bearings
F
J
Specialty Tapered
Products
E
M
H
D MIN
D MAX
S-2000
Y
MAX
S
C
L HSG
C
L HSG
X
UNISPHERE II
Z
MIN
A
R
L
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
EXPANSION
NON-EXPANSION
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-46
SELECTION
PAGE B14-14
Shaft
Size
B#
C#
Min
FEATURES/BENEFITS
PAGE B14-2
F
Bolt
Dia.
G#
H#
J#
X
Total
Exp.
1.87
5/8
0.87
1.63
5.72
3.88
2.75
1.21
2.21
1/4
0.03
2.94
2.13
5/8
1.00
1.88
6.33
4.28
3.13
1.35
2.15
1/4
0.03
3.47
2.37
3/4
1.13
2.25
7.69
5.00
3.75
1.54
2.63
1/4
0.03
4.05
2.25
3/4
1.13
2.44
8.70
5.56
4.25
1.35
3.35
5/16
0.03
4.50
2.50
3/4
1.13
2.75
9.67
6.44
4.75
1.82
3.41
3/8
0.04
5.00
2.87
7/8
1.25
3.00
11.16
7.63
5.50
1.93
4.05
3/8
0.04
5.84
3.75
2.00
3.25
13.19
8.75
6.69
1.4
4.77
3/8
0.04
5.92
3.75
2.00
3.25
13.19
10.25
6.69
2.66
4.42
3/8
0.04
7.02
4.62
2.00
3.69
14.94
11.41
7.50
2.46
4.94
23/64
0.04
7.89
Max
2-1/4
2-7/16
3.42
10.50
3.49
8.31
8.69
2-1/2
2-11/16
2-3/4
3.50
12.00
4.00
9.18
9.82
2-15/16
3
3-3/16
3-1/4
4.17
13.50
4.49
10.75 11.25
3-7/16
3-1/2
3-15/16
4.70
15.25
4.50
12.25 12.75
4
4-7/16
5.23
16.63
4.63
13.25 13.75
4-1/2
4-15/16
5.98
18.50
5.13
15.25 15.75
5
5-7/16
6.17
22
6.25
17.38 19.12
5-1/2
5-15/16
7.08
22
6.25
17.38 19.12
6
6-7/16
6-1/2
7.39
26
7.12
21.25 23.25
6-15/16
7
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-47
SELECTION
PAGE B14-14
Bearing Reference
Guide
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071238
EP4B-IP-204L
071255
EP4B-IP-204LE
071239
EP4B-IP-207L
071256
EP4B-IP-207LE
071240
EP4B-IP-208L
071257
EP4B-IP-208LE
071241
EP4B-IP-211L
071258
EP4B-IP-211LE
071242
EP4B-IP-212L
071259
EP4B-IP-212LE
071243
EP4B-IP-215L
071260
EP4B-IP-215LE
071244
EP4B-IP-300L
071261
EP4B-IP-300LE
071245
EP4B-IP-303L
071262
EP4B-IP-303LE
071246
EP4B-IP-304L
071263
EP4B-IP-304LE
071247
EP4B-IP-307L
071264
EP4B-IP-307LE
071248
EP4B-IP-308L
071265
EP4B-IP-308LE
071249
EP4B-IP-315L
071266
EP4B-IP-315LE
071250
EP4B-IP-400L
071267
EP4B-IP-400LE
071251
EP4B-IP-407L
071268
EP4B-IP-407LE
071252
EP4B-IP-408L
071269
EP4B-IP-408LE
071253
EP4B-IP-415L
071270
EP4B-IP-415LE
071254
EP4B-IP-500L
071271
EP4B-IP-500LE
071626
EP4B-IP-507L
071634
EP4B-IP-507LE
071627
EP4B-IP-508L
071635
EP4B-IP-508LE
071628
EP4B-IP-515L
071636
EP4B-IP-515LE
071629
EP4B-IP-600L
071637
EP4B-IP-600LE
071630
EP4B-IP-607L
071638
EP4B-IP-607LE
071631
EP4B-IP-608L
071639
EP4B-IP-608LE
071632
EP4B-IP-615L
071640
EP4B-IP-615LE
071633
EP4B-IP-700L
071641
EP4B-IP-700LE
E-Family Roller
Bearings
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
22215
2-15/16
3
3-3/16
3-1/4
22218
3-7/16
3-1/2
3-15/16
22220
4
4-7/16
22222
4-1/2
4-15/16
22226
5
5-7/16
22228
5-1/2
5-15/16
22232
6
6-7/16
6-1/2
22236
6-15/16
7
22213
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071204
EP4B-IP-204R
071221
EP4B-IP-204RE
071205
EP4B-IP-207R
071222
EP4B-IP-207RE
071206
EP4B-IP-208R
071223
EP4B-IP-208RE
071207
EP4B-IP-211R
071224
EP4B-IP-211RE
071208
EP4B-IP-212R
071225
EP4B-IP-212RE
071209
EP4B-IP-215R
071226
EP4B-IP-215RE
071210
EP4B-IP-300R
071227
EP4B-IP-300RE
071211
EP4B-IP-303R
071228
EP4B-IP-303RE
071212
EP4B-IP-304R
071229
EP4B-IP-304RE
071213
EP4B-IP-307R
071230
EP4B-IP-307RE
071214
EP4B-IP-308R
071231
EP4B-IP-308RE
071215
EP4B-IP-315R
071232
EP4B-IP-315RE
071216
EP4B-IP-400R
071233
EP4B-IP-400RE
071217
EP4B-IP-407R
071234
EP4B-IP-407RE
071218
EP4B-IP-408R
071235
EP4B-IP-408RE
071219
EP4B-IP-415R
071236
EP4B-IP-415RE
071220
EP4B-IP-500R
071237
EP4B-IP-500RE
071610
EP4B-IP-507R
071618
EP4B-IP-507RE
071611
EP4B-IP-508R
071619
EP4B-IP-508RE
071612
EP4B-IP-515R
071620
EP4B-IP-515RE
071613
EP4B-IP-600R
071621
EP4B-IP-600RE
071614
EP4B-IP-607R
071622
EP4B-IP-607RE
071615
EP4B-IP-608R
071623
EP4B-IP-608RE
071616
EP4B-IP-615R
071624
EP4B-IP-615RE
071617
EP4B-IP-700R
071625
EP4B-IP-700RE
Specialty Tapered
Products
Shaft
Size*
S-2000
Bearing
Series
UNISPHERE II
IMPERIAL
UNIFIED SAF
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
G
E-Family Roller
Bearings
J
Specialty Tapered
Products
M
H
D MIN
D MAX
S-2000
S
X
S
C
L
C
L
HSG
Y
MAX
HSG
UNISPHERE II
Z
MIN
A
R
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
EXPANSION
NON-EXPANSION
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-48
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Description
2-3/8
071706
SP4B-IP-206R
071724
SP4B-IP-206RE
2-7/16
071707
SP4B-IP-207R
071725
SP4B-IP-207RE
2-1/2
071708
SP4B-IP-208R
071726
SP4B-IP-208RE
2-11/16
071709
SP4B-IP-211R
071727
SP4B-IP-211RE
2-3/4
071710
SP4B-IP-212R
071728
SP4B-IP-212RE
2-15/16
071711
SP4B-IP-215R
071729
SP4B-IP-215RE
071712
SP4B-IP-300R
071730
SP4B-IP-300RE
3-3/16
071713
SP4B-IP-303R
071731
SP4B-IP-303RE
3-1/4
071714
SP4B-IP-304R
071732
SP4B-IP-304RE
3-7/16
071715
SP4B-IP-307R
071733
SP4B-IP-307RE
3-1/2
071716
SP4B-IP-308R
071734
SP4B-IP-308RE
3-11/16
071717
SP4B-IP-311R
071735
SP4B-IP-311RE
3-15/16
071718
SP4B-IP-315R
071736
SP4B-IP-315RE
071719
SP4B-IP-400R
071737
SP4B-IP-400RE
4-7/16
071720
SP4B-IP-407R
071738
SP4B-IP-407RE
4-1/2
071721
SP4B-IP-408R
071739
SP4B-IP-408RE
4-15/16
071722
SP4B-IP-415R
071740
SP4B-IP-415RE
071723
SP4B-IP-500R
071741
SP4B-IP-500RE
Shaft
Size
2-3/8
2-7/16
2-1/2
3.42
9.25
3. 50
Specialty Tapered
Products
Dodge Part No.
S-2000
Description
E-Family Roller
Bearings
Dodge Expansion
Dodge Part No.
F
Bolt
Dia
X
Total
Exp
Min
Max
3.00
6.88
7.63
1.75
1/2
1.06
1.63
5.61
3.88
2.75
1.17
2.25
1/4
0.03
2.94
10.44
3.13
7.60
9.10
1.88
5/8
1. 43
1.88
6. 44
4. 28
3. 25
1.12
2.37
1/4
0.03
3.47
4.17
12.30
3.75
8.88
10.88
2.00
3/4
1.88
2.25
7.56
5.00
3.75
1.53
2.63
1/4
0.03
4.05
4.70
14.88
4.31
10.88
13.38
2.25
3/4
2.13
2.44
8.70
5.56
4.25
1.70
3.00
5/16
0.03
4.50
4-7/16
4-1/2
5.23
16.13
4.75
11.88
14.50
2.50
3/4
2.19
2.75
9.67
6.44
4.75
1.53
3.70
3/8
0.04
5.00
4-15/16
5
5. 98
17.50
5.03
15.13
15. 88
2.75
7/8
1. 38
3.00
11. 12
7. 63
5. 50
2.22
3.77
3/8
0.04
5.84
2-11/16
2-3/4
2-15/16
3
UNISPHERE II
Dodge Non-Expansion
Shaft
Size
3-3/16
3-1/4
3-7/16
3-15/16
4
IMPERIAL
3-1/2
3-11/16
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-49
SELECTION
PAGE B14-14
UNIFIED SAF
Bearing Reference
Guide
DIMENSIONS
E-Family Roller
Bearings
G
F
J
Specialty Tapered
Products
M
H
D MIN
D MAX
B
S
S-2000
CL HSG
Y
MAX
CL HSG
Z
MIN
A
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
3-11/16 THRU 5
EXPANSION
3-11/16 THRU 5
NON-EXPANSION
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-50
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Description
2-1/4
071906
SEP4B-IP-204R
071923
SEP4B-IP-204RE
2-7/16
071907
SEP4B-IP-207R
071924
SEP4B-IP-207RE
2-1/2
071908
SEP4B-IP-208R
071925
SEP4B-IP-208RE
2-11/16
071909
SEP4B-IP-211R
071926
SEP4B-IP-211RE
2-3/4
071910
SEP4B-IP-212R
071927
SEP4B-IP-212RE
2-15/16
071911
SEP4B-IP-215R
071928
SEP4B-IP-215RE
071912
SEP4B-IP-300R
071929
SEP4B-IP-300RE
3-3/16
071913
SEP4B-IP-303R
071930
SEP4B-IP-303RE
3-1/4
071914
SEP4B-IP-304R
071931
SEP4B-IP-304RE
3-7/16
071915
SEP4B-IP-307R
071932
SEP4B-IP-307RE
3-1/2
071916
SEP4B-IP-308R
071933
SEP4B-IP-308RE
3-15/16
071917
SEP4B-IP-315R
071934
SEP4B-IP-315RE
071918
SEP4B-IP-400R
071935
SEP4B-IP-400RE
4-7/16
071919
SEP4B-IP-407R
071936
SEP4B-IP-407RE
4-1/2
071920
SEP4B-IP-408R
071937
SEP4B-IP-408RE
4-15/16
071921
SEP4B-IP-415R
071938
SEP4B-IP-415RE
071922
SEP4B-IP-500R
071939
SEP4B-IP-500RE
Shaft
Size
2-1/4
2-7/16
2-1/2
3.42
10.25
2-11/16
2-3/4
2-15/16
3
3.50
3-3/16
3-1/4
3-7/16
3-1/2
S-2000
Dodge Part No.
F
Bolt
Dia.
X
Total
Exp
Min
Max
3.25
7.13
8.75
1.88
5/8
1.57
1.63
5.71
3.88
2.75
1.21
2.21
1/4
0.03
2.94
10.83
3.38
8.00
9.60
2.12
5/8
1.56
1.88
6.32
4.28
3.13
1.35
2.15
1/4
0.03
3.47
4.17
13.63
3.75
9.25
11.25
2.38
3/4
1.88
2.25
7.69
5.00
3.75
1.54
2.63
1/4
0.03
4.05
3-15/16
4
4.70
14.88
4.31
10.88
13.38
2.25
3/4
2.13
2.44
8.70
5.56
4.25
1.70
3.00
5/16
0.03
4.50
4-7/16
4-1/2
5.23
16.13
4.75
11.88
14.50
2.50
3/4
2.19
2.75
9.67
6.44
4.75
1.53
3.70
3/8
0.04
5.00
4-15/16
5
5.98
17.50
5.04
15.13
15.88
2.88
7/8
1.38
3.00
11.16
7.63
5.50
1.93
4.05
3/8
0.04
5.84
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-51
SELECTION
PAGE B14-14
UNISPHERE II
Description
IMPERIAL
Dodge Part No.
Specialty Tapered
Products
Dodge Expansion
Shaft
Size
UNIFIED SAF
Dodge Non-Expansion
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
IMPERIAL ISAF
1-7/16 THRU 3-7/16 INCH - 2-BOLT

P
30
E-Family Roller
Bearings
F BOLT
Specialty Tapered
Products
M
H
D MIN
D MAX
B
Y
MAX
S-2000
Z
MIN
X
NON-EXP
UNISPHERE II
EXP
CL OF HSG & BORE
C
CONTACT SEAL
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
22208
1-7/16
070054
P2B509-ISAF-107R
070064
P2B509-ISAF-107RE
22209
1-11/16
070055
P2B510-ISAF-111R
070065
P2B510-ISAF-111RE
22210
1-15/16
070056
P2B511-ISAF-115R
070066
P2B511-ISAF-115RE
22211
2-3/16
070057
P2B513-ISAF-203R
070067
P2B513-ISAF-203RE
22213
2-7/16
070951
P2B515-ISAF-207R
070955
P2B515-ISAF-207RE
22215
2-11/16
070952
P2B516-ISAF-211R
070956
P2B516-ISAF-211RE
22215
2-15/16
070953
P2B517-ISAF-215R
070957
P2B517-ISAF-215RE
22218
3-7/16
070954
P2B520-ISAF-307R
070958
P2B520-ISAF-307RE
Bearing
Shaft
Size
Inch
IMPERIAL
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070074
P2B509-ISAF-107L
070084
P2B509-ISAF-107LE
070075
P2B510-ISAF-111L
070085
P2B510-ISAF-111LE
070076
P2B511-ISAF-115L
070086
P2B511-ISAF-115LE
070077
P2B513-ISAF-203L
070087
P2B513-ISAF-203LE
070959
P2B515-ISAF-207L
070963
P2B515-ISAF-207LE
070960
P2B516-ISAF-211L
070964
P2B516-ISAF-211LE
070961
P2B517-ISAF-215L
070965
P2B517-ISAF-215LE
070962
P2B520-ISAF-307L
070966
P2B520-ISAF-307LE
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-52
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
IMPERIAL ISAF
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
509
510
511
513
515
516
517
520
2.63
2.80
2.86
3.03
3.42
3.50
3.50
4.16
8.25
8.25
9.63
11.00
11.13
12.59
12.59
15.36
Shaft
Size
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
SAF
Series
509
510
511
513
515
516
517
520
J
4.94
5.45
5.97
6.34
6.86
7.50
7.75
9.25
FEATURES/BENEFITS
PAGE B14-2
2.19
2.38
2.75
3.25
3.13
3.50
3.50
4.34
Min
6.25
6.50
7.38
8.60
8.63
9.88
9.88
11.81
Max
7.00
7.00
8.25
9.50
9.63
11.00
11.00
13.13
2.72
3.00
3.28
3.50
3.86
4.28
4.28
5.00
2.25
2.50
2.75
3.00
3.25
3.50
3.75
4.50
5.52
5.81
6.38
6.97
7.42
8.31
8.31
10.13
1.53
1.73
1.73
1.88
2.06
2.16
2.16
2.48
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-53
F
Bolts
1/2
1/2
5/8
5/8
5/8
3/4
3/4
7/8
0.94
0.88
1.20
1.16
1.13
1.31
1.31
1.63
0.88
1.03
1.03
1.03
1.25
1.00
1.25
1.66
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
1.80
2.08
2.30
2.59
2.94
3.47
3.47
4.05
X
Expansion
7/32
7/32
17/64
7/32
5/16
15/64
15/64
3/8
SELECTION
PAGE B14-14
IMPERIAL
SAF
Series
UNIFIED SAF
Shaft
Size
UNISPHERE II
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
1-7/16 THRU 3-7/16 INCH - 2-BOLT
Bearing Reference
Guide
DIMENSIONS
IMPERIAL ISAF
P
30
E-Family Roller
Bearings
E G
F BOLT
M
H
Specialty Tapered
Products
D MIN
D MAX
B
Y
MAX
Z
MIN
X
NON-EXP
S-2000
EXP
C
L OF HSG & BORE
C
LABYRINTH SEAL
UNISPHERE II
Bearing
IMPERIAL
22228
22213
22215
22215
22218
22220
22222
22226
22232
22236
22236
Shaft
Size
Inch
UNIFIED SAF
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070058
P4B515-ISAF-207R
070068
P4B515-ISAF-207RE
070094
P4B516-ISAF-211R
070095
P4B516-ISAF-211RE
070059
P4B517-ISAF-215R
070069
P4B517-ISAF-215RE
070060
P4B520-ISAF-307R
070070
P4B520-ISAF-307RE
070061
P4B522-ISAF-315R
070071
P4B522-ISAF-315RE
070062
P4B526-ISAF-407R
070072
P4B526-ISAF-407RE
070063
P4B528-ISAF-415R
070073
P4B528-ISAF-415RE
037850
P4B532-ISAF-507R
037854
P4B532-ISAF-507RE
037903
P4B532-ISAF-508R
037904
P4B532-ISAF-508RE
037851
P4B534-ISAF-515R
037855
P4B534-ISAF-515RE
037909
P4B534-ISAF-600R
037910
P4B534-ISAF-600RE
037852
P4B536-ISAF-607R
037856
P4B536-ISAF-607RE
037915
P4B536-ISAF-608R
037916
P4B536-ISAF-608RE
037853
P4B538-ISAF-615R
037857
P4B538-ISAF-615RE
037921
P4B538-ISAF-700R
037922
P4B538-ISAF-700RE
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
070078
P4B515-ISAF-207L
070088
P4B515-ISAF-207LE
070096
P4B516-ISAF-211L
070097
P4B516-ISAF-211LE
070079
P4B517-ISAF-215L
070089
P4B517-ISAF-215LE
070080
P4B520-ISAF-307L
070090
P4B520-ISAF-307LE
070081
P4B522-ISAF-315L
070091
P4B522-ISAF-315LE
070082
P4B526-ISAF-407L
070092
P4B526-ISAF-407LE
070083
P4B528-ISAF-415L
070093
P4B528-ISAF-415LE
037901
P4B532-ISAF-507L
037902
P4B532-ISAF-507LE
037905
P4B532-ISAF-508L
037906
P4B532-ISAF-508LE
037907
P4B534-ISAF-515L
037908
P4B534-ISAF-515LE
037911
P4B534-ISAF-600L
037912
P4B534-ISAF-600LE
037913
P4B536-ISAF-607L
037914
P4B536-ISAF-607LE
037917
P4B536-ISAF-608L
037918
P4B536-ISAF-608LE
037919
P4B538-ISAF-615L
037920
P4B538-ISAF-615LE
037923
P4B538-ISAF-700L
037924
P4B538-ISAF-700LE

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-54
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
IMPERIAL ISAF
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
515
516
517
520
522
526
528
3.42
3.50
3.50
4.16
4.70
5.23
5.98
11.13
12.59
12.59
15.36
16.50
18.38
19.70
532
6.17
534
D
Max
9.63
11.00
11.00
13.13
14.50
16.00
17.38
F
Bolts
3.13
3.50
3.50
4.34
4.75
5.13
5.88
Min
8.63
9.88
9.88
11.81
12.59
14.50
15.63
1.88
2.13
2.13
2.38
2.75
3.25
3.38
1/2
5/8
5/8
3/4
3/4
7/8
1
1.13
1.31
1.31
1.63
1.83
1.75
2.00
1.25
1.00
1.25
1.60
1.73
2.06
2.06
21.66
6.25
17.38
19.25
3.75
2.06
2.34
7.08
24.75
6.75
19.38
21.63
4.25
2.25
2.88
536
7.39
26.75
7.13
20.88
23.63
4.63
2.50
3.00
538
7.39
28.00
7.50
21.63
24.38
4.50
1-1/4
2.75
3.13
Shaft
Size
SAF
Series
X
Expansion
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
515
516
517
520
522
526
528
6.86
7.50
7.75
9.25
10.18
11.66
12.41
3.88
4.28
4.28
5.00
5.56
6.44
7.63
3.25
3.50
3.75
4.50
4.94
6.00
6.00
7.42
8.31
8.31
10.13
10.72
12.47
13.38
2.06
2.16
2.16
2.48
2.86
3.09
3.69
5/16
15/64
15/64
3/8
3/8
3/8
3/8
0.03
0.03
0.03
0.03
0.03
0.04
0.04
2.94
3.47
3.47
4.05
4.50
5.00
5.84
532
12.50
8.75
6.69
13.38
3.64
3/8
0.04
5.92
534
13.69
10.25
7.06
15.09
4.11
3/8
0.04
7.02
536
15.13
11.41
7.50
17.38
4.34
3/8
0.04
7.89
538
15.50
11.41
7.88
1.38
4.34
3/8
0.04
7.89
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-55
SELECTION
PAGE B14-14
S-2000
UNISPHERE II
IMPERIAL
SAF
Series
UNIFIED SAF
Shaft
Size
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
IMPERIAL ISAF
35 THRU 90MM - 2-BOLT
P
Y
MAX
30
E-Family Roller
Bearings
Z
MIN
X
E
Specialty Tapered
Products
F BOLT
NON-EXP
EXP
H
CL OF HSG & BORE
D MIN
D MAX
LABYRINTH SEAL
S-2000
UNISPHERE II
Bearing
Shaft
Size
in mm
22208
22209
22210
22210
22213
22213
22215
22215
22215
22215
22220
Trident Seal
Non-Expansion
Part No.
Part Name
Expansion
Part No.
Part Name
35
068774
P2B509-ISAF-035MR
068775
40
45
50
60
60
65
70
65
75
90
077646
077647
073562
077648
068576
077649
077650
065641
065657
077651
P2B509-ISAF-040MR
P2B510-ISAF-045MR
P2B511-ISAF-050MR
P2B513-ISAF-060MR
P2B515-ISAF-060MR
P2B515-ISAF-065MR
P2B516-ISAF-070MR
P2B517-ISAF-065MR
P2B517-ISAF-075MR
P2B520-ISAF-090MR
073561
068905
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
P2B509-ISAF-035MRE
P2B509-ISAF-035ML
P2B509-ISAF-035MLE
P2B509-ISAF-040MRE
P2B510-ISAF-045MRE
P2B511-ISAF-050MRE
P2B513-ISAF-060MRE
P2B515-ISAF-060MRE
P2B515-ISAF-065MRE
P2B516-ISAF-070MR
P2B517-ISAF-065MRE
P2B517-ISAF-075MRE
P2B520-ISAF-090MRE
P2B509-ISAF-040ML
P2B510-ISAF-045ML
P2B511-ISAF-050ML
P2B515-ISAF-060ML
P2B515-ISAF-060ML
P2B515-ISAF-065ML
P2B516-ISAF-070ML
P2B517-ISAF-065ML
P2B517-ISAF-075ML
P2B520-ISAF-090ML
P2B509-ISAF-040MLE
P2B510-ISAF-045MLE
P2B511-ISAF-050MLE
P2B515-ISAF-060MLE
P2B515-ISAF-060MLE
P2B515-ISAF-065MLE
P2B516-ISAF-070MLE
P2B517-ISAF-065MLE
P2B517-ISAF-075MLE
P2B520-ISAF-090MLE
067921
067922
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-56
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
IMPERIAL ISAF
509
66.80
209.55
55.63
510
511
513
71.12
72.64
76.96
209.55
244.60
279.40
515
86.87
516
F
Bolts
X
Expansion
158.75 177.80
M12
23.88
22.35
125.48
74.17
57.15
140.21
5.56
5.56
0.51
45.72
60.45
69.85
82.55
165.10 177.80
187.45 209.55
218.44 241.30
M12
M16
M16
22.35
30.48
29.46
26.16
26.16
26.16
138.43
151.64
161.04
76.20
83.31
88.90
63.50
69.85
76.20
147.57
162.05
177.04
43.94
43.94
47.75
5.56
6.75
5.56
0.51
0.51
0.76
52.83
58.42
65.79
282.70
79.50
219.20 244.60
M16
28.70
31.75
174.24
98.04
82.55
188.47
52.32
7.94
0.76
74.68
88.90
319.79
88.90
250.95 279.40
M20
33.27
25.40
190.50 108.71
88.90
211.07
54.86
5.95
0.76
88.14
517
88.90
319.79
88.90
250.95 279.40
M20
33.27
31.75
196.85 108.71
95.25
211.07
54.86
5.95
0.76
88.14
520
105.66 390.14 110.24 299.97 333.50
M22
41.40
42.16
234.95 127.00 114.30 257.30
62.99
9.53
0.76
102.87
Min
Max
UNISPHERE II
IMPERIAL
35
40
45
50
60
60
65
70
65
75
90
SAF
Series
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-57
SELECTION
PAGE B14-14
UNIFIED SAF
Shaft
Size
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
IMPERIAL ISAF
Y
MAX
E-Family Roller
Bearings
30
Z
MIN
X
E
Specialty Tapered
Products
F BOLT
NON-EXP
EXP
H
CL OF HSG & BORE
D MIN
D MAX
LABYRINTH SEAL
S-2000
UNISPHERE II
IMPERIAL
Bearing
Shaft
Size
in mm
22215
22215
22215
22218
22220
22220
22220
22222
22226
22226
22228
22228
22232
22236
22236
22236
65
70
75
85
90
90
100
110
115
125
130
140
150
160
170
170
Trident Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
077660
P4B515-ISAF-065MR
P4B515-ISAF-065MRE
077661
P4B516-ISAF-070MR
P4B516-ISAF-070MRE
062700
P4B517-ISAF-075MR
P4B517-ISAF-075MRE
077458
P4B520-ISAF-085MR
P4B520-ISAF-085MRE
077662
P4B520-ISAF-090MR
P4B520-ISAF-090MRE
073070
P4B522-ISAF-090MR
073071
P4B522-ISAF-090MRE
074867
P4B522-ISAF-100MR
074868
P4B522-ISAF-100MRE
075444
P4B526-ISAF-110MR
077561
P4B526-ISAF-110MRE
077652
P4B526-ISAF-115MR
P4B526-ISAF-115MRE
075431
P4B528-ISAF-125MR
P4B528-ISAF-125MRE
075306
P4B532-ISAF-130MR
P4B532-ISAF-130MRE
073938
P4B532-ISAF-140MR
P4B532-ISAF-140MRE
075432
P4B534-ISAF-150MR
077897
P4B534-ISAF-150MRE
074613
P4B536-ISAF-160MR
074614
P4B536-ISAF-160MRE
062461
P4B536-ISAF-170MR
P4B536-ISAF-170MRE
062270
P4B538-ISAF-170MR
P4B538-ISAF-170MRE
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
P4B515-ISAF-065ML
P4B515-ISAF-065MLE
P4B516-ISAF-070ML
P4B516-ISAF-070MLE
P4B517-ISAF-075ML
P4B517-ISAF-075MLE
P4B520-ISAF-085ML
P4B520-ISAF-085MLE
P4B520-ISAF-090ML
P4B520-ISAF-090MLE
P4B522-ISAF-090ML
P4B522-ISAF-090MLE
P4B522-ISAF-100ML
P4B522-ISAF-100MLE
P4B526-ISAF-110ML
P4B526-ISAF-110MLE
P4B526-ISAF-115ML
P4B526-ISAF-115MLE
077473
P4B528-ISAF-125ML
P4B528-ISAF-125MLE
P4B532-ISAF-130ML
P4B532-ISAF-130MLE
P4B532-ISAF-140ML
P4B532-ISAF-140MLE
P4B534-ISAF-150ML
P4B534-ISAF-150MLE
P4B536-ISAF-160ML
P4B536-ISAF-160MLE
P4B536-ISAF-170ML
P4B536-ISAF-170MLE
P4B538-ISAF-170ML
P4B538-ISAF-170MLE
PAGE B14-8
B14-58
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
IMPERIAL ISAF
86.87
88.90
88.90
47.75
54.10
54.10
M12
M16
M16
28.70
33.27
33.27
31.75
25.40
31.75
174.24 98.55
190.50 108.71
196.85 108.71
520
105.66 390.14 110.24 299.97 333.50
60.45
M20
41.40
522
119.38 419.10 120.65 319.79 368.30
69.85
M20
526
132.84 466.85 130.30 368.30 406.40
82.55
528
151.89 500.38 149.35 397.00 441.45
532
156.72 550.16 158.75 441.45 488.95
X
Expansion
65
70
75
85
90
90
100
110
115
125
130
140
150
160
170
170
282.70
319.79
319.79
79.50
88.90
88.90
82.55
88.90
95.25
188.47
211.07
211.07
52.32
54.86
54.86
7.94
5.95
5.95
0.76
0.76
0.76
74.68
88.14
88.14
40.64
234.95 127.00 114.30 257.30
62.99
9.53
0.76
102.87
46.48
43.94
258.57 141.22 125.48 272.29
72.64
9.53
0.76
114.30
M22
44.45
52.32
296.16 163.58 152.40 316.74
78.49
9.53
1.02
127.00
85.85
M24
50.80
52.32
315.21 193.80 152.40 339.85
93.73
9.53
1.02
148.34
95.25
M24
52.32
59.44
317.50 222.25 169.93 339.85
92.46
9.53
1.02
150.37
534
179.83 628.65 171.45 492.25 549.40 107.95
M24
57.15
73.15
347.73 260.35 179.32 383.29 104.39
9.53
1.02
178.31
536
187.71 679.45 188.72 530.35 600.20 102.36
M24
63.50
76.20
384.30 289.81 190.50 441.45 110.24
9.53
1.02
200.41
538
187.71 711.20 190.50 549.40 619.25 114.30
M30
69.85
79.50
393.70 289.81 200.15 441.45 110.24
9.53
1.02
200.41
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-59
SELECTION
PAGE B14-14
UNISPHERE II
IMPERIAL
SAF
Series
UNIFIED SAF
515
516
517
D
Min
Max
219.20 244.60
250.95 279.40
250.95 279.40
Shaft
Size
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
ISAF PILLOW BLOCK HYDRAULIC
A
A1
E-Family Roller
Bearings
S1
S
30
X
G
HYD PORT
Specialty Tapered
Products
HYD PORT
D MIN
D MAX
B
S-2000
Part Numbers - Hydraulic ISAF

Housing Bearing
Designation Series
UNISPHERE II
IMPERIAL
532
532
534
534
536
536
538
538
544
544
048
048
3152
3152
056
056
056
22232K
22232K
22234K
22234K
22236K
22236K
22238K
22238K
22244K
22244K
23048K
23048K
23152K
23152K
23056K
23056K
23056K
Shaft
Size
Part
Number
Description
Insert
Number
5-7/16"
5-1/2"
5-15/16"
6
6-7/16"
6-1/2"
6-15/16"
7"
7-15/16
8"
8-1/2"
9"
9-7/16"
9-1/2"
10"
10-7/16"
10-1/2"
072955
072564
072959
072565
072963
072566
072967
072567
072490
072000
072820
072001
072786
072789
072002
072772
074115
P4B532-ISAF-507R HYD
072954
072572
072958
072573
072962
072574
072966
072575
072492
072014
072822
072015
072791
072792
072016
072771
074117
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
Housing Bearing
Designation Series
SPECIFICATIONS
PAGE B14-5
3156
3156
060
3160
3160
3164
3164
068
3168
3168
3172
3172
076
3176
3176
080
23156K
23156K
23060K
23160K
23160K
23164K
23164K
23068K
23168K
23168K
23172K
23172K
23076K
23176K
23176K
23080K
Shaft
Size
Part
Number
Description
10-7/16"
10-1/2"
11"
10-15/16"
11"
11-15/16"
12"
12-1/2"
12-7/16"
12-1/2"
13-7/16"
13-1/2"
14"
13-15/16"
14"
15"
072742
072744
072003
072831
072833
072857
072859
072004
072910
072911
072706
072708
072005
072688
072690
072006
PAGE B14-8
B14-60
SELECTION
PAGE B14-14
Insert
Number
072746
072747
072017
072835
072836
072018
072710
072711
072019
072692
072693
072020
Bearing Reference
Guide
DIMENSIONS
7-15/16"
8"
8-1/2"
9"
9-7/16"
9-1/2"
10"
10-7/16"
10-1/2"
10-7/16"
10-1/2"
11"
10-15/16"
11"
11-15/16"
12"
12-1/2"
12-7/16"
12-1/2"
13-7/16"
13-1/2"
14"
13-15/16"
14"
15"
A1
D
Min
Max
F
Bolts
S1
X
Exp
532
22232K
9.59
9.05
21.66
6.25
17.38
19.25
3.75
2.06
2.34
13.82
1.12
9.68
6.69
16.38
4.68
4.41
0.38
534
22234K
9.81
9.26
24.75
6.75
19.38
21.63
4.25
2.25
2.87
14.56
1.12
10.19
7.06
17.38
4.81
4.54
0.38
536
22236K
10.15
9.60
26.75
7.13
20.88
23.63
4.63
2.50
3.00
15.25
1.12
10.45
7.50
18.38
4.82
4.55
0.38
538
22238K
10.20
9.66
28.00
7.50
21.63
24.38
4.50
1-1/4
2.75
3.13
16.37
1.38
10.96
7.88
19.38
4.94
4.67
0.38
544
22244K
10.58
9.91
32.75
8.88
24.75
27.88
5.25
1-1/2
3.18
3.75
19.38
1.62
12.23
9.50
22.75
5.12
4.79
0.38
048
23048K
10.28
9.62
28.75
8.00
22.50
25.00
5.00
1-1/4
2.63
3.38
17.34
1.38
12.24
8.25
20.88
5.14
4.80
0.38
3152
23152K
13.17
12.51
35.00
13.12
29.00
30.50
8.75
1-5/8
2.50
3.75
21.55
1.76
13.26
10.25
24.32
6.59
6.26
0.78
056
23056K
10.99
10.33
34.25
9.00
26.25
29.50
5.50
1-1/2
3.25
4.00
20.12
1.62
14.28
9.88
23.88
5.58
5.24
0.38
3156
23156K
13.28
12.61
38.25
14.75
31.63
34.63
9.00
1-5/8
3.25
3.75
23.93
1.76
14.28
12.00
27.87
6.75
6.41
0.78
060
23060K
11.49
10.82
38.25
14.75
31.63
34.63
9.00
1-5/8
3.25
3.75
23.93
1.76
15.30
12.00
27.87
5.71
5.38
0.38
3160
23160K
13.80
13.13
38.25
14.75
31.63
34.63
9.00
1-5/8
3.25
3.37
24.50
1.76
15.30
12.00
26.88
7.03
6.70
0.78
3164
23164K
14.46
13.79
41.75
15.75
35.00
36.50
10.50
1-7/8
2.75
4.50
26.58
2.00
16.33
12.81
29.50
7.22
6.89
0.78
068
23068K
12.08
11.23
39.00
15.25
32.00
34.00
10.00
1-7/8
3.00
4.56
24.50
2.00
17.32
12.00
28.81
6.01
5.59
0.38
3168
23168K
15.23
14.39
43.58
17.75
36.75
38.25
10.75
2.87
5.00
28.06
2.12
17.31
14.00
31.50
7.58
7.16
0.78
3172
23172K
15.16
14.49
46.00
17.13
39.25
40.75
11.00
2.87
5.25
29.25
2.12
18.35
14.50
33.56
7.71
7.38
0.78
076
23076K
13.01
12.09
41.75
15.75
35.00
36.50
10.50
2.87
4.50
26.58
2.12
18.48
12.81
29.50
6.40
5.94
0.38
3176
23176K
15.83
14.91
46.00
17.13
39.25
40.75
11.00
2.87
5.25
29.50
2.12
18.48
14.50
33.56
8.04
7.58
0.78
080
23080K
13.54
12.62
46.00
17.13
39.25
40.75
11.00
2.87
5.75
29.00
2.12
19.49
14.50
33.56
6.68
6.22
0.38
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-61
SELECTION
PAGE B14-14
UNISPHERE II
6"
6-7/16"
6-1/2"
6-15/16"
7"
IMPERIAL
5-15/16"
SAF Bearing
Series Series
UNIFIED SAF
Shaft
Size
5-7/16"
5-1/2"
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
ISAF PILLOW BLOCK HYDRAULIC
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - ISN Metric Pillow Block
30 THROUGH 140mm, 2-BOLT
E-Family Roller
Bearings

grease fitting
G
J
Specialty Tapered
Products
F
M
H
D MIN
D MAX
B
S-2000
S
CL
CL
HSG
Y
MAX
HSG
UNISPHERE II
Z
MIN
A
L
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
EXPANSION
NON-EXPANSION
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-62
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - ISN Metric Pillow Block
30 THROUGH 140mm, 2-BOLT
Description
Description
071017
P2B507-ISN-030MLR
071018
P2B508-ISN-035MLR
071034
P2B507-ISN-030MFS
071051
P2B507-ISN-030MLS
071035
P2B508-ISN-035MFS
071052
P2B509-ISN-040MFR
071019
P2B508-ISN-035MLS
P2B509-ISN-040MLR
071036
P2B509-ISN-040MFS
071053
071003
P2B510-ISN-045MFR
P2B509-ISN-040MLS
071020
P2B510-ISN-045MLR
071037
P2B510-ISN-045MFS
071054
50mm
071004
P2B510-ISN-045MLS
P2B511-ISN-050MFR
071021
P2B511-ISN-050MLR
071038
P2B511-ISN-050MFS
071055
22211
55mm
P2B511-ISN-050MLS
071005
P2B512-ISN-055MFR
071022
P2B512-ISN-055MLR
071039
P2B512-ISN-055MFS
071056
22213
P2B512-ISN-055MLS
60mm
071006
P2B513-ISN-060MFR
071023
P2B513-ISN-060MLR
071040
P2B513-ISN-060MFS
071057
P2B513-ISN-060MLS
22215
65mm
071007
P2B515-ISN-065MFR
071024
P2B515-ISN-065MLR
071041
P2B515-ISN-065MFS
071058
P2B515-ISN-065MLS
22215
70mm
071008
P2B516-ISN-070MFR
071025
P2B516-ISN-070MLR
071042
P2B516-ISN-070MFS
071059
P2B516-ISN-070MLS
22215
75mm
071009
P2B517-ISN-075MFR
071026
P2B517-ISN-075MLR
071043
P2B517-ISN-075MFS
071060
P2B517-ISN-075MLS
22218
80mm
071010
P2B518-ISN-080MFR
071027
P2B518-ISN-080MLR
071044
P2B518-ISN-080MFS
071061
P2B518-ISN-080MLS
22218
85 mm
071011
P2B519-ISN-085MFR
071028
P2B519-ISN-085MLR
071045
P2B519-ISN-085MFS
071062
P2B519-ISN-085MLS
90mm
071012
P2B520-ISN-090MFR
071029
P2B520-ISN-090MLR
071046
P2B520-ISN-090MFS
071063
P2B520-ISN-090MLS
100mm
071013
P2B522-ISN-100MFR
071030
P2B522-ISN-100MLR
071047
P2B522-ISN-100MFS
071064
P2B522-ISN-100MLS
110mm
071014
P2B524-ISN-110MFR
071031
P2B524-ISN-110MLR
071048
P2B524-ISN-110MFS
071065
P2B524-ISN-110MLS
115mm
071015
P2B526-ISN-115MFR
071032
P2B526-ISN-115MLR
071049
P2B526-ISN-115MFS
071066
P2B526-ISN-115MLS
125mm
071016
P2B528-ISN-125MFR
071033
P2B528-ISN-125MLR
071050
P2B528-ISN-125MFS
071067
P2B528-ISN-125MLS
22228
135mm
071102
P2B530-ISN-135MFR
071103
P2B530-ISN-135MLR
071104
P2B530-ISN-135MFS
071105
P2B530-ISN-135MLS
22232
140mm
071106
P2B532-ISN-140MFR
071107
P2B532-ISN-140MLR
071108
P2B532-ISN-140MFS
071109
P2B532-ISN-140MFS
22209
22210
22220
22222
22226
Shaft
Size
mm
30
35
40
45
50
55
60
65
70
75
80
85
90
100
110
115
125
135
140
071000
P2B507-ISN-030MFR
071001
P2B508-ISN-035MFR
40mm
071002
45mm
66.7
66.7
71.4
72.6
72.6
77.0
86.9
88.9
88.9
88.9
106.0
106.0
120.0
120.0
133.0
152.0
152.0
156.8
179.8
184.9
205.9
206.3
204.9
253.9
253.9
274.9
280.1
315.9
315.9
345.3
345.0
379.8
410.0
410.0
444.8
500.0
539.8
560.0
52.0
60.2
60.2
60.2
70.2
69.9
80.2
80.1
90.2
90.2
100.3
100.2
110.2
120.0
120.0
130.0
150.2
159.8
160.0
D
min.
max.
145.0
150.0
155.0
160.0
190.0
190.0
205.0
215.0
244.5
244.5
270.0
264.2
292.8
314.4
314.5
359.6
400.0
443.0
463.0
155.0
174.6
174.6
175.0
215.9
216.0
235.0
236.0
268.3
268.3
293.7
296.1
327.0
356.0
356.0
387.0
427.0
457.0
477.0
F
Bolt
Dia.
M12
M12
M12
M12
M16
M16
M16
M16
M20
M20
M20
M20
M24
M24
M24
M24
M30
M30
M30
20.0
27.3
24.8
22.5
31.0
31.0
33.0
28.5
34.1
34.1
34.0
37.9
43.1
46.8
46.8
41.7
48.5
42.0
42.0
22.0
25.0
25.0
25.0
28.0
30.0
30.0
30.0
32.0
32.0
35.0
35.0
40.0
45.0
45.0
50.0
50.0
60.0
60.0
100.9
110.8
114.0
113.8
124.5
130.3
152.4
156.0
176.0
176.0
196.7
205.2
218.3
239.0
260.7
292.8
290.4
312.5
345.3
67.6
67.6
74.7
81.0
81.0
87.1
96.5
106.7
106.7
106.7
124.7
124.7
138.7
138.7
161.3
191.8
191.8
222.2
260.4
50.0
60.0
60.0
60.0
70.0
70.0
80.0
80.0
95.0
95.0
100.0
112.0
112.0
125.0
140.0
150.0
150.0
160.0
170.0
22.6
22.6
20.6
21.1
21.1
23.1
27.1
26.9
26.9
26.9
34.5
34.5
37.2
37.2
44.4
48.6
48.6
51.8
62.4
44.1
44.1
50.8
51.4
51.4
54.2
59.7
61.7
61.7
61.7
71.4
71.4
82.3
82.3
88.4
103.2
103.2
105.0
117.4
M = Size in millimeters otherwise 110 = 1 and 10/16

F = Non-Expansion
L = Expansion (Non-Locating)
R = Trident Rubbing Seal
S = Labyrinth Seal
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-63
4.0
0.51
4.0
6.5
0.51
6.5
0.51
6.5
7.0
0.76
7.0
0.76
7.0
0.76
7.0
0.76
7.0
7.0
0.76
7.0
8.0
0.76
8.0
10.0
1.02
10.0
1.02
10.0
16.3
1.02
16.8
1.02
Dimensions in mm
SELECTION
PAGE B14-14
E-Family Roller
Bearings
35mm
EXPANSION
Part
Number
Specialty Tapered
Products
30mm
Description
Part
Number
22208
Description
Part
Number
S-2000
Part
Number
Z
45.7
52.8
58.4
66.0
74.9
88.1
UNISPHERE II
Shaft
Size
mm
NON-EXPANSION
88.1
102.9
114.3
127.0
148.3
IMPERIAL
Bearing
LABYRINTH SEAL
EXPANSION
150.4
178.3
UNIFIED SAF
TRIDENT SEAL
NON-EXPANSION
Bearing Reference
Guide
DIMENSIONS
ISNX Hydraulic
E-Family Roller
Bearings
A
A1
P
S1
S
30
X
Specialty Tapered
Products
HYD PORT
J
F
HYD PORT
S-2000
D MIN
D MAX
B
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-64
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
ISNX Hydraulic
Insert
Bearing Series
Shaft Size
Part Number
Description
3134
23134K
150mm
072919
P4B134-ISNX-150MR HYD
072895
3136
23136K
160mm
072920
072896
3138
23138K
170mm
072921
072897
3140
23140K
180mm
072922
072898
3144
23144K
200mm
072923
072899
3148
23148K
220mm
072924
072900
3152
23152K
240mm
072912
072901
3156
23156K
260mm
072913
072902
3160
23160K
280mm
072914
072903
3164
23164K
300mm
072915
072904
3168
23168K
320mm
072916
072905
3172
23172K
340mm
072917
072906
3176
23176K
360mm
072918
072907
A1
A2
min.
E-Family Roller
Bearings
Specialty Tapered
Products
F
max.
Bolt
Dia.
mm
L2
S1
X
Exp
150
3134
254.5 240.5 155.2 510.0 180.1 423.9 436.1 100.1
24
34.0
70.1 360.4 27.9 252.5 268.7 169.9 416.1 124.0 116.8 19.8 0.0
160
3136
266.4 252.5 161.0 530.1 190.0 444.0 456.2 110.0
24
34.0
74.9 380.0 27.9 265.4 283.0 179.8 437.9 131.6 124.5 19.8 0.0
170
3138
268.5 254.5 168.1 560.1 210.1 474.0 486.2 119.9
24
34.0
80.0 399.5 27.9 278.4 295.9 190.0 458.2 133.9 127.0 19.8 0.0
180
3140
284.5 270.5 170.2 610.1 230.1 502.9 517.1 130.0
30
41.9
85.1 426.0 35.1 285.0 302.5 210.1 470.4 137.9 130.8 19.8 0.0
200
3144
294.9 277.9 175.8 640.1 239.8 532.9 547.1 140.2
30
41.9
89.9 450.9 35.1 310.6 328.4 220.0 500.4 143.8 135.1 19.8 0.0
220
3148
316.5 299.5 188.7 700.0 260.1 592.8 607.1 149.9
30
41.9
95.0 486.2 35.1 310.9 328.7 240.0 530.4 154.9 146.6 19.8 0.0
240
3152
334.5 317.8 197.1 770.1 279.9 642.1 658.1 160.0
36
50.0 100.1 546.9 41.9 336.8 354.3 259.8 617.7 167.4 159.0 19.8 0.0
260
3156
337.3 320.3 201.7 789.9 279.9 661.9 677.9 160.0
36
50.0 104.9 582.9 41.9 362.7 380.5 279.9 619.3 171.5 162.8 19.8 2.8
280
3160
350.5 333.5 208.5 830.1 310.1 702.1 718.1 190.0
36
50.0 110.0 617.5 41.9 388.6 405.9 300.0 682.8 178.6 170.2 19.8 3.0
300
3164
367.3 350.3 213.1 880.1 329.9 741.9 757.9 199.9
36
50.0 115.1 662.9 41.9 414.8 432.1 320.0 720.9 183.4 175.0 19.8 0.0
320
3168
386.8 365.5 222.3 950.0 359.9 802.1 818.1 220.0
36
50.0 119.9 697.0 41.9 439.7 457.2 339.9 755.9 192.5 181.9 19.8 0.0
340
3172
385.1 368.0 225.3 1000.0 359.9 832.1 848.1 220.0
36
50.0 119.9 724.7 41.9 466.1 483.6 350.0 809.8 195.8 187.5 19.8 2.3
360
3176
402.1 378.7 233.7 1039.9 359.9 862.1 878.1 220.0
36
50.0 119.9 740.9 41,9 469.4 486.7 359.9 822.5 204.2 192.5 19.8 0.0
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-65
SELECTION
PAGE B14-14
S-2000
UNISPHERE II
Shaft
Size Series
mm
Number
IMPERIAL
Designation
UNIFIED SAF
Housing
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - IP Flange - Round
1-1/8 THRU 2 INCH
B
E-Family Roller
Bearings
DD
DD
D
Specialty Tapered
Products
F
D
1-1/8" THRU 1-1/2"
CONSTRUCTION
1-5/8" - 2"
CONSTRUCTION
S-2000
C
E
E
P
CL
CL
UNISPHERE II
Y
MAX
Z
MIN
IMPERIAL
EXPANSION
NON-EXPANSION
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-66
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
1-1/8
1-3/16
1 -1/4
1 -3/8
1 -7/16
1-1/2
1-5/8
1 -11/16
1-3/4
1 -7/8
1-15/16
2
*
**
DD
F
Bolt
Dia.
Total
Exp
X
Y
2.63
5.88
2.86
3.53
5.00
1.80
*1/2
0.50
3.75
2.72
0.23
3/16
0.02
1.80
2.81
6.38
3.11
3.89
5.50
1.89
*1/2
0.50
4.25
3.00
0.27
1/4
0.02
2.08
2.86
6.69
3.16
4.06
5.75
1.92
**1/2
0.56
4.50
3.28
0.27
1/4
0.02
2.30
S-2000
3 Equally spaced bolt holes

4 Equally spaced bolt holes
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-67
SELECTION
PAGE B14-14
UNIFIED SAF
Shaft
Size
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069651
F3R-IP-102L
069672
F3R-IP-102LE
069652
F3R-IP-103L
069673
F3R-IP-103LE
069653
F3R-IP-104L
069674
F3R-IP-104LE
069654
F3R-IP-106L
069675
F3R-IP-106LE
069655
F3R-IP-107L
069676
F3R-IP-107LE
069656
F3R-IP-108L
069677
F3R-IP-108LE
069657
F4R-IP-110L
069678
F4R-IP-110LE
069658
F4R-IP-111L
069679
F4R-IP-111LE
069659
F4R-IP-112L
069680
F4R-IP-112LE
069660
F4R-IP-114L
069681
F4R-IP-114LE
069661
F4R-IP-115L
069682
F4R-IP-115LE
069662
F4R-IP-200L
069683
F4R-IP-200LE
UNISPHERE II
1-1/8
1-3/16
1 -1/4
22208
1 -3/8
1 -7/16
1-1/2
1-5/8
22209
1 -11/16
1-3/4
1 -7/8
22210
1-15/16
2
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
F3R-IP-102R
069630
F3R-IP-102RE
069593
F3R-IP-103R
069631
F3R-IP-103RE
069594
F3R-IP-104R
069632
F3R-IP-104RE
069595
F3R-IP-106R
069633
F3R-IP-106RE
069596
F3R-IP-107R
069634
F3R-IP-107RE
069597
F3R-IP-108R
069635
F3R-IP-108RE
069598
F4R-IP-110R
069636
F4R-IP-110RE
069599
F4R-IP-111R
069637
F4R-IP-111RE
069600
F4R-IP-112R
069638
F4R-IP-112RE
069601
F4R-IP-114R
069639
F4R-IP-114RE
069602
F4R-IP-115R
069640
F4R-IP-115RE
069603
F4R-IP-200R
069641
F4R-IP-200RE
IMPERIAL
Shaft
Size
Inch
Bearing
Specialty Tapered
Products
E-Family Roller
Bearings
1-1/8 THRU 2 INCH
Bearing Reference
Guide
DIMENSIONS
2-3/16 THRU 3 INCH
DD
E-Family Roller
Bearings
D
Specialty Tapered
Products
F
D
2-3/16" - 3"
CONSTRUCTION
S-2000
C
E
E
P
C
L
CL
Y
MAX
UNISPHERE II
X
Z
MIN
IMPERIAL
EXPANSION
NON-EXPANSION
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-68
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Shaft
Size
2-3/16
2-1/4
2-3/8
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
DD
F
Bolt
Dia.
X
Total
Exp
3.03
7.38
3.34
4.50
6.38
2.05
5/8
0.56
4.80
3.50
0.31
1/4
0.03
2.60
3.42
7.75
3.73
4.77
6.75
2.38
5/8
0.64
5.38
3.88
0.31
1/4
0.03
2.95
3.50
9.25
3.81
5.56
7.88
2.39
3/4
0.75
6.25
4.28
0.31
1/4
0.03
3.47
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-69
SELECTION
PAGE B14-14
UNISPHERE II
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069663
F4R-IP-203L
069684
F4R-IP-203LE
069664
F4R-IP-204L
069685
F4R-IP-204LE
069665
F4R-IP-206L
069686
F4R-IP-206LE
069666
F4R-IP-207L
069687
F4R-IP-207LE
069667
F4R-IP-208L
069688
F4R-IP-208LE
069668
F4R-IP-211L
069689
F4R-IP-211LE
069669
F4R-IP-212L
069690
F4R-IP-212LE
069670
F4R-IP-215L
069691
F4R-IP-215LE
069671
F4R-IP-300L
069692
F4R-IP-300LE
IMPERIAL
2-3/16
2-1/4
2-3/8
22213
2-7/16
2-1/2
2-11/16
2-3/4
22215
2-15/16
3
22211
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069604
F4R-IP-203R
069642
F4R-IP-203RE
069605
F4R-IP-204R
069643
F4R-IP-204RE
069606
F4R-IP-206R
069644
F4R-IP-206RE
069607
F4R-IP-207R
069645
F4R-IP-207RE
069608
F4R-IP-208R
069646
F4R-IP-208RE
069609
F4R-IP-211R
069647
F4R-IP-211RE
069610
F4R-IP-212R
069648
F4R-IP-212RE
069611
F4R-IP-215R
069649
F4R-IP-215RE
069612
F4R-IP-300R
069650
F4R-IP-300RE
UNIFIED SAF
Shaft
Size
Inch
Bearing
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
2-3/16 THRU 3 INCH
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - IP Flange - Square
1-1/8 THRU 2-1/4 INCH
B
E-Family Roller
Bearings
N
Specialty Tapered
Products
S-2000
Y
MAX
P
C
L
C
L
UNISPHERE II
Z
MIN
IMPERIAL
G
H
NON-EXPANSION
EXPANSION
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-70
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
F
Bolt
Dia.
X
Total
Exp.
2.63
4.75
2.86
3.53
1/2
1.08
0.50
3.81
5.00
2.72
2.48
0.23
3/16
0.02
1.80
2.81
5.13
3.11
3.89
1/2
1.20
0.50
4.41
5.50
3.00
2.78
0.30
1/4
0.02
2.08
2.86
5.30
3.16
4.06
1/2
1.23
0.56
4.97
5.75
3.28
2.91
0.30
1/4
0.02
2.30
3.03
5.88
3.34
4.52
5/8
1.31
0.56
5.02
6.38
3.80
3.09
0.31
1/4
0.02
2.60
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-71
SELECTION
PAGE B14-14
S-2000
UNISPHERE II
Shaft
Size
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069749
F4S-IP-102L
069777
F4S-IP-102LE
069750
F4S-IP-103L
069778
F4S-IP-103LE
069751
F4S-IP-104L
069779
F4S-IP-104LE
069752
F4S-IP-106L
069780
F4S-IP-106LE
069753
F4S-IP-107L
069781
F4S-IP-107LE
069754
F4S-IP-108L
069782
F4S-IP-108LE
069755
F4S-IP-110L
069783
F4S-IP-110LE
069756
F4S-IP-111L
069784
F4S-IP-111LE
069757
F4S-IP-112L
069785
F4S-IP-112LE
069758
F4S-IP-114L
069786
F4S-IP-114LE
069759
F4S-IP-115L
069787
F4S-IP-115LE
069760
F4S-IP-200L
069788
F4S-IP-200LE
069761
F4S-IP-203L
069789
F4S-IP-203LE
069762
F4S-IP-204L
069790
F4S-IP-204LE
IMPERIAL
1-1/8
1-3/16
1-1/4
22208
1-3/8
1-7/16
1-1/2
1-5/8
22209
1-11/16
1-3/4
1-7/8
22210
1-15/16
2
2-3/16
22211
2-1/4
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069693
F4S-IP-102R
069721
F4S-IP-102RE
069694
F4S-IP-103R
069722
F4S-IP-103RE
069695
F4S-IP-104R
069723
F4S-IP-104RE
069696
F4S-IP-106R
069724
F4S-IP-106RE
069697
F4S-IP-107R
069725
F4S-IP-107RE
069698
F4S-IP-108R
069726
F4S-IP-108RE
069699
F4S-IP-110R
069727
F4S-IP-110RE
069700
F4S-IP-111R
069728
F4S-IP-111RE
069701
F4S-IP-112R
069729
F4S-IP-112RE
069702
F4S-IP-114R
069730
F4S-IP-114RE
069703
F4S-IP-115R
069731
F4S-IP-115RE
069704
F4S-IP-200R
069732
F4S-IP-200RE
069705
F4S-IP-203R
069733
F4S-IP-203RE
069706
F4S-IP-204R
069734
F4S-IP-204RE
UNIFIED SAF
Shaft
Size
Inch
Bearing
Specialty Tapered
Products
E-Family Roller
Bearings
1-1/8 THRU 2-1/4 INCH
Bearing Reference
Guide
DIMENSIONS
2-3/8 THRU 4 INCH
E-Family Roller
Bearings
B
D
Specialty Tapered
Products
D B
F
S-2000
K
C
C
P
C
L
MAX
C
L
X
UNISPHERE II
Z
MIN
J L
IMPERIAL
G
H
H
NON-EXPANSION
EXPANSION
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-72
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
2-3/8
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-11/16
3-15/16
4
Bolt
Dia.
Total
Exp.
3.42
6.13
3.73
4.78
5/8
1.36
0.64
5.63
6.75
3.88
3.41
0.31
1/4
0.03
2.95
3.50
7.18
3.81
5.56
3/4
1.42
0.75
6.50
7.88
4.28
3.84
0.31
1/4
0.03
3.47
4.17
8.25
4.48
6.72
3/4
1.59
0.94
7.48
9.50
5.00
4.33
0.31
1/4
0.03
4.05
4.70
9.25
5.08
7.61
7/8
1.78
1.06
8.22
10.75
5.56
4.70
0.38
5/16
0.03
4.50
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-73
SELECTION
PAGE B14-14
S-2000
UNISPHERE II
Shaft
Size
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069763
F4S-IP-206L
069791
F4S-IP-206LE
069764
F4S-IP-207L
069792
F4S-IP-207LE
069765
F4S-IP-208L
069793
F4S-IP-208LE
069766
F4S-IP-211L
069794
F4S-IP-211LE
069767
F4S-IP-212L
069795
F4S-IP-212LE
069768
F4S-IP-215L
069796
F4S-IP-215LE
069769
F4S-IP-300L
069797
F4S-IP-300LE
069770
F4S-IP-303L
069798
F4S-IP-303LE
069771
F4S-IP-304L
069799
F4S-IP-304LE
069772
F4S-IP-307L
069800
F4S-IP-307LE
069773
F4S-IP-308L
069801
F4S-IP-308LE
069774
F4S-IP-311L
069802
F4S-IP-311LE
069775
F4S-IP-315L
069803
F4S-IP-315LE
069776
F4S-IP-400L
069804
F4S-IP-400LE
IMPERIAL
2-3/8
2-7/16
2-1/2
2-11/16
2-3/4
22215
2-15/16
3
3-3/16
3-1/4
22218
3-7/16
3-1/2
3-11/16
22220
3-15/16
4
22213
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069707
F4S-IP-206R
069735
F4S-IP-206RE
069708
F4S-IP-207R
069736
F4S-IP-207RE
069709
F4S-IP-208R
069737
F4S-IP-208RE
069710
F4S-IP-211R
069738
F4S-IP-211RE
069711
F4S-IP-212R
069739
F4S-IP-212RE
069712
F4S-IP-215R
069740
F4S-IP-215RE
069713
F4S-IP-300R
069741
F4S-IP-300RE
069714
F4S-IP-303R
069742
F4S-IP-303RE
069715
F4S-IP-304R
069743
F4S-IP-304RE
069716
F4S-IP-307R
069744
F4S-IP-307RE
069717
F4S-IP-308R
069745
F4S-IP-308RE
069718
F4S-IP-311R
069746
F4S-IP-311RE
069719
F4S-IP-315R
069747
F4S-IP-315RE
069720
F4S-IP-400R
069748
F4S-IP-400RE
UNIFIED SAF
Shaft
Size
Inch
Bearing
Specialty Tapered
Products
E-Family Roller
Bearings
2-3/8 THRU 4 INCH
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - IP Flange - Square with Type E Dimensions
1-3/8 THRU 2-3/16 INCH
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-74
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Shaft
Size
B#
C#
DD
1-3/8
2.63
4.63
3.15
3.50
4.95
1-7/16
1-1/2
1-5/8
2.81
5.38
3.64
4.13
5.83
1-11/16
1-3/4
1-7/8
2.86
5.63
3.64
4.38
6.19
1-15/16
2
2-3/16
3.03
6.25
3.96
4.88
6.90


FEATURES/BENEFITS
PAGE B14-2
Bolt
Dia.
H#
J#
X
Total
Exp.
1/2
0.66
1.06
3.88
2.72
2.34
0.53
5/32
0.02
1.80
1/2
0.67
1.19
4.18
3.00
2.50
0.83
3/16
0.02
2.08
1/2
0.65
1.18
4.36
3.28
2.60
0.79
7/32
0.02
2.30
5/8
0.68
1.38
4.88
3.50
2.88
0.94
1/4
0.02
2.60
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-75
SELECTION
PAGE B14-14
S-2000
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071338
EF4B-IP-106L
071364
EF4B-IP-106LE
071339
EF4B-IP-107L
071365
EF4B-IP-107LE
071340
EF4B-IP-108L
071366
EF4B-IP-108LE
071341
EF4B-IP-110L
071367
EF4B-IP-110LE
071342
EF4B-IP-111L
071368
EF4B-IP-111LE
071343
EF4B-IP-112L
071369
EF4B-IP-112LE
071344
EF4B-IP-114L
071370
EF4B-IP-114LE
071345
EF4B-IP-115L
071371
EF4B-IP-115LE
071346
EF4B-IP-200L
071372
EF4B-IP-200LE
071347
EF4B-IP-203L
071373
EF4B-IP-203LE
UNISPHERE II
1-3/8
1-7/16
1-1/2
22209
1-5/8
1-11/16
1-3/4
1-7/8
22210
1-15/16
2
22211
2-3/16
22208
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071288
EF4B-IP-106R
071313
EF4B-IP-106RE
071289
EF4B-IP-107R
071314
EF4B-IP-107RE
071290
EF4B-IP-108R
071315
EF4B-IP-108RE
071291
EF4B-IP-110R
071316
EF4B-IP-110RE
071292
EF4B-IP-111R
071317
EF4B-IP-111RE
071293
EF4B-IP-112R
071318
EF4B-IP-112RE
071294
EF4B-IP-114R
071319
EF4B-IP-114RE
071295
EF4B-IP-115R
071320
EF4B-IP-115RE
071296
EF4B-IP-200R
071321
EF4B-IP-200RE
071297
EF4B-IP-203R
071322
EF4B-IP-203RE
IMPERIAL
Shaft
Size*
UNIFIED SAF
Bearing
Series
Specialty Tapered
Products
E-Family Roller
Bearings
1-3/8 THRU 2-3/16 INCH
Bearing Reference
Guide
DIMENSIONS
2-1/4 THRU 4-1/2 INCH
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-76
SELECTION
PAGE B14-14
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
22215
2-15/16
3
3-3/16
3-1/4
22218
3-7/16
3-1/2
3-15/16
22220
4
4-7/16
22222
4-1/2
22213
Shaft
Size*
B#
C#
DD
2-1/4
2-7/16
3.42
6.88
4.41
5.37
7.60
2-1/2
2-11/16
2-3/4
3.50
7.75
4.59
6.00
8.49
2-15/16
3
3-3/16
3-1/4
4.17
9.25
5.4
7.00
9.90
3-7/16
3-1/2
3-15/16
4.70
10.25
6.73
7.75
10.96
4
4-7/16
5.23
10.88
7.12
8.75
12.37
4-1/2


FEATURES/BENEFITS
PAGE B14-2
Bearing Reference
Guide
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071348
EF4B-IP-204L
071374
EF4B-IP-204LE
071349
EF4B-IP-207L
071375
EF4B-IP-207LE
071350
EF4B-IP-208L
071376
EF4B-IP-208LE
071351
EF4B-IP-211L
071377
EF4B-IP-211LE
071352
EF4B-IP-212L
071378
EF4B-IP-212LE
071353
EF4B-IP-215L
071379
EF4B-IP-215LE
071354
EF4B-IP-300L
071380
EF4B-IP-300LE
071355
EF4B-IP-303L
071381
EF4B-IP-303LE
071356
EF4B-IP-304L
071382
EF4B-IP-304LE
071357
EF4B-IP-307L
071383
EF4B-IP-307LE
071358
EF4B-IP-308L
071384
EF4B-IP-308LE
071359
EF4B-IP-315L
071385
EF4B-IP-315LE
071360
EF4B-IP-400L
071386
EF4B-IP-400LE
071361
EF4B-IP-407L
071387
EF4B-IP-407LE
071362
EF4B-IP-408L
071388
EF4B-IP-408LE
F
Bolt
Dia
H#
J#
X
Total
Exp.
5/8
1.04
1.50
5.81
3.88
3.32
0.99
1/4
0.03
2.95
3/4
0.79
1.61
6.30
4.28
3.58
1.1
1/4
0.03
3.47
3/4
1.12
1.88
7.44
4.15
1.24
1/4
0.03
4.05
7/8
1.22
2.12
8.27
5.56
4.58
2.02
5/16
0.03
4.50
7/8
1.42
2.43
9.13
6.44
5.01
1.89
3/8
0.04
5.00
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-77
SELECTION
PAGE B14-14
E-Family Roller
Bearings
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
071298
EF4B-IP-204R
071323
EF4B-IP-204RE
071299
EF4B-IP-207R
071324
EF4B-IP-207RE
071300
EF4B-IP-208R
071325
EF4B-IP-208RE
071301
EF4B-IP-211R
071326
EF4B-IP-211RE
071302
EF4B-IP-212R
071327
EF4B-IP-212RE
071303
EF4B-IP-215R
071328
EF4B-IP-215RE
071304
EF4B-IP-300R
071329
EF4B-IP-300RE
071305
EF4B-IP-303R
071330
EF4B-IP-303RE
071306
EF4B-IP-304R
071331
EF4B-IP-304RE
071307
EF4B-IP-307R
071332
EF4B-IP-307RE
071308
EF4B-IP-308R
071333
EF4B-IP-308RE
071309
EF4B-IP-315R
071334
EF4B-IP-315RE
071310
EF4B-IP-400R
071335
EF4B-IP-400RE
071311
EF4B-IP-407R
071336
EF4B-IP-407RE
071312
EF4B-IP-408R
071337
EF4B-IP-408RE
Specialty Tapered
Products
Shaft
Size*
S-2000
Bearing
Series
UNISPHERE II
2-1/4 THRU 4-1/2 INCH
IMPERIAL
UNIFIED SAF
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
Steel IMPERIAL-HD Flange - 4 Bolt
1-1/8 THRU 2-1/4 INCH
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
Dodge Non-Expansion
Dodge Part No.
072170
072171
072172
072173
072174
072175
072176
072177
072178
072179
072180
072181
072182
072183
Shaft
Size
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
Shaft
Size
IMPERIAL
UNIFIED SAF
1-1/8
1-3/16
1-1/4
2.63
4.62
2.87
3.54
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
2.81
5.37
3.01
3.89
1-3/4
1-7/8
1-15/16
2.86
5.18
3.15
4.07
2
2-3/16
3.03
5.87
3.26
4.51
2-1/4
FEATURES/BENEFITS
PAGE B14-2
Dodge Expansion
Description
SF4S-IP-102R
SF4S-IP-103R
SF4S-IP-104R
SF4S-IP-106R
SF4S-IP-107R
SF4S-IP-108R
SF4S-IP-110R
SF4S-IP-111R
SF4S-IP-112R
SF4S-IP-114R
SF4S-IP-115R
SF4S-IP-200R
SF4S-IP-203R
SF4S-IP-204R
Dodge Part No.

072198
072199
072200
072201
072202
072203
072204
072205
072206
072207
072208
072209
072210
072211
Description
SF4S-IP-102RE
SF4S-IP-103RE
SF4S-IP-104RE
SF4S-IP-106RE
SF4S-IP-107RE
SF4S-IP-108RE
SF4S-IP-110RE
SF4S-IP-111RE
SF4S-IP-112RE
SF4S-IP-114RE
SF4S-IP-115RE
SF4S-IP-200RE
SF4S-IP-203RE
SF4S-IP-204RE
F
Bolt
Dia.
X
Total
Exp
1/2
0.84
0.88
3.70
5.00
2.72
2.25
0.24
3/16
0.02
1.80
1/2
0.91
0.88
4.41
5.50
3.00
2.62
0.20
7/32
0.02
2.08
1/2
0.91
0.91
4.66
5.75
3.28
2.75
0.29
7/32
0.02
2.30
5/8
0.93
0.75
5.03
6.38
3.50
2.93
0.23
1/4
0.02
2.60
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-78
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Steel IMPERIAL-HD Flange - 4 Bolt
2-3/8
2-7/16
3.42
6.18
3.57
2-1/2
2-11/16
2-3/4
3.50
7.18
3.77
2-15/16
3
3-3/16
3-1/4
4.17
8.37
4.27
3-7/16
3-1/2
3-11/16
3-15/16
4.70
9.49
5.07
4
FEATURES/BENEFITS
PAGE B14-2
S-2000
Description
SF4S-IP-206RE
SF4S-IP-207RE
SF4S-IP-208RE
SF4S-IP-211RE
SF4S-IP-212RE
SF4S-IP-215RE
SF4S-IP-300RE
SF4S-IP-303RE
SF4S-IP-304RE
SF4S-IP-307RE
SF4S-IP-308RE
SF4S-IP-311RE
SF4S-IP-315RE
SF4S-IP-400RE
F
Bolt
Dia.
X
Total
Exp
4.77
5/8
0.95
1.00
5.63
6.75
3.80
3.24
0.15
1/4
0.03
2.94
5.57
3/4
0.94
1.06
6.51
7.88
4.20
3.67
0.27
1/4
0.03
3.47
6.72
3/4
0.94
1.28
7.49
9.50
5.00
4.16
0.10
1/4
0.03
4.50
7.60
1.06
1.50
8.22
10.75
5.46
4.55
0.37
5/16
0.03
4.50
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-79
SELECTION
PAGE B14-14
UNISPHERE II
Shaft
Size
Dodge Part No.

072212
072213
072214
072215
072216
072217
072218
072219
072220
072221
072222
072223
072224
072225
IMPERIAL
2-3/8
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-11/16
3-15/16
4
Dodge Expansion
Description
SF4S-IP-206R
SF4S-IP-207R
SF4S-IP-208R
SF4S-IP-211R
SF4S-IP-212R
SF4S-IP-215R
SF4S-IP-300R
SF4S-IP-303R
SF4S-IP-304R
SF4S-IP-307R
SF4S-IP-308R
SF4S-IP-311R
SF4S-IP-315R
SF4S-IP-400R
UNIFIED SAF
Dodge Non-Expansion
Dodge Part No.
072184
072185
072186
072187
072188
072189
072190
072191
072192
072193
072194
072195
072196
072197
Shaft
Size
Specialty Tapered
Products
E-Family Roller
Bearings
2-3/8 THRU 4 INCH
Bearing Reference
Guide
DIMENSIONS
Steel IMPERIAL-HD Flange 4 Bolt With Type E Dimensions
E-Family Roller
Bearings
Specialty Tapered
Products
Dodge Non-Expansion
Dodge Expansion
Shaft
Size
Dodge Part No.
Description
Dodge Part No.
Description
1-3/8
072226
SEF4B-IP-106R
072251
SEF4B-IP-106RE
1-716
072227
SEF4B-IP-107R
072252
SEF4B-IP-107RE
S-2000
1-1/2
072228
SEF4B-IP-108R
072253
SEF4B-IP-108RE
1-5/8
072229
SEF4B-IP-110R
072254
SEF4B-IP-110RE
1-11/16
072230
SEF4B-IP-111R
072255
SEF4B-IP-111RE
1-3/4
072231
SEF4B-IP-112R
072256
SEF4B-IP-112RE
1-7/8
072232
SEF4B-IP-114R
072257
SEF4B-IP-114RE
1-15/16
072233
SEF4B-IP-115R
072258
SEF4B-IP-115RE
UNISPHERE II
072234
SEF4B-IP-200R
072259
SEF4B-IP-200RE
2-3/16
072235
SEF4B-IP-203R
072260
SEF4B-IP-203RE
2-7/16
072237
SEF4B-IP-207R
072262
SEF4B-IP-207RE
2-1/2
072238
SEF4B-IP-208R
072263
SEF4B-IP-208RE
2-11/16
072239
SEF4B-IP-211R
072264
SEF4B-IP-211RE
2-3/4
072240
SEF4B-IP-212R
072265
SEF4B-IP-212RE
2-15/16
072241
SEF4B-IP-215R
072266
SEF4B-IP-215RE
SEF4B-IP-300RE
072242
SEF4B-IP-300R
072267
3-3/16
072243
SEF4B-IP-303R
072268
SEF4B-IP-303RE
3-1/4
072244
SEF4B-IP-304R
072269
SEF4B-IP-304RE
3-7/16
072245
SEF4B-IP-307R
072270
SEF4B-IP-307RE
IMPERIAL
3-1/2
072246
SEF4B-IP-308R
072271
SEF4B-IP-308RE
3-15/16
072247
SEF4B-IP-315R
072272
SEF4B-IP-315RE
SEF4B-IP-400RE
072248
SEF4B-IP-400R
072273
4-7/16
072249
SEF4B-IP-407R
072274
SEF4B-IP-407RE
4-1/2
072250
SEF4B-IP-408R
072275
SEF4B-IP-408RE
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-80
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Shaft
Size
1-3/8
1-716
DD
F
Bolt
Dia.
X
Total
Exp
2.63
4.620
2.87
3.50
4.95
1/2
0.84
0.88
3.7
2.72
2.25
0.24
3/16
0.02
1.80
2.81
5.37
3.01
4.13
5.84
1/2
0.91
0.88
4.41
3.00
2.62
0.20
7/32
0.02
2.08
2.86
5.49
3.15
4.38
6.19
1/2
0.91
0.88
4.75
3.28
2.75
0.29
7/32
0.02
2.30
3.03
6.18
3.26
4.87
6.89
5/8
0.93
1.00
5.03
3.50
2.93
0.23
1/4
0.02
2.60
3.42
6.62
3.57
5.37
7.60
5/8
0.95
1.00
5.63
3.80
3.23
0.15
1/4
0.03
2.95
3.50
7.43
3.77
6.00
8.49
3/4
0.94
1.06
6.66
4.20
3.75
0.27
1/4
0.03
3.47
4.17
8.62
4.27
7.01
9.91
3/4
0.96
1.31
7.49
5.00
4.17
0.10
1/4
0.03
4.05
4.70
9.96
5.04
7.75
10.96
7/8
1.06
1.50
8.22
5.44
4.68
0.34
5/16
0.03
4.50
8.75
12.38
7/8
1.38
1.50
8.76
6.35
4.80
0.36
3/8
0.04
5.00
Specialty Tapered
Products
E-Family Roller
Bearings
Steel IMPERIAL-HD Flange 4 Bolt With Type E Dimensions
1-5/8
S-2000
1-1/2
1-11/16
1-3/4
1-7/8
1-15/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
UNISPHERE II
2
2-3/16
3-1/2
3-15/16
4
4-7/16
5.23
10.87
5.59
4-1/2
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-81
SELECTION
PAGE B14-14
UNIFIED SAF
3-1/4
3-7/16
IMPERIAL
3-3/16
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - IP Piloted Flange
1-1/8 THRU 2-1/2 INCH
DD
F
E-Family Roller
Bearings
D
Specialty Tapered
Products
M
DODGE
S-2000
P
Y
MAX
UNISPHERE II
Z
MIN
L
K B
IMPERIAL
H
E
H
E
N
K B
N
NON-EXPANSION
EXPANSION
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-82
SELECTION
PAGE B14-14
Shaft
Size
1-1/8
1-3/16
1-1/4
2.63
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16 2.81
1-3/4
1-7/8
1-15/16 2.86
2
2-3/16
3.03
2-1/4
2-3/8
2-7/16
3.42
2-1/2
* = +0.000, -0.002
Bearing Reference
Guide
DD
F
Bolt
Dia.
K*
X
Total
Exp
5.25
1.84
3.09
4.38
0.75
3/8
1.39
0.50
3. 625
2.72
3/8-16
2.61
1.23
1.22
3/16
0.02
1.80
6.13
1.91
3.63
5.13
0.88
7/16
1.61
0.50
4.250
3.00
7/16-14
2.86
1.20
1.27
1/4
0.02
2.08
6.38
2.00
3.80
5.38
0.88
7/16
1.59
0.56
4.500
3.28
7/16-14
2.86
1.27
1.27
1/4
0.02
2.30
7.13
2.19
4.25
6.00
1.00
1/2
1.67
0.56
5.000
3.50
1/2-13
3.08
1.38
1.42
1/4
0.03
2.60
7.63
2.50
4.59
6.50
1.00
1/2
1.88
0.63
5.500
3.88
1/2-13
3.44
1.55
1.56
1/4
0.03
2.95
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-83
SELECTION
PAGE B14-14
E-Family Roller
Bearings
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069869
FC-IP-102L
069901
FC-IP-102LE
069870
FC-IP-103L
069902
FC-IP-103LE
069871
FC-IP-104L
069903
FC-IP-104LE
069872
FC-IP-106L
069904
FC-IP-106LE
069873
FC-IP-107L
069905
FC-IP-107LE
069874
FC-IP-108L
069906
FC-IP-108LE
069875
FC-IP-110L
069907
FC-IP-110LE
069876
FC-IP-111L
069908
FC-IP-111LE
069877
FC-IP-112L
069909
FC-IP-112LE
069878
FC-IP-114L
069910
FC-IP-114LE
069879
FC-IP-115L
069911
FC-IP-115LE
069880
FC-IP-200L
069912
FC-IP-200LE
069881
FC-IP-203L
069913
FC-IP-203LE
069882
FC-IP-204L
069914
FC-IP-204LE
069883
FC-IP-206L
069915
FC-IP-206LE
069884
FC-IP-207L
069916
FC-IP-207LE
069885
FC-IP-208L
069917
FC-IP-208LE
Specialty Tapered
Products
1-1/8
1-3/16
1-1/4
22208
1-3/8
1-7/16
1-1/2
1-5/8
22209
1-11/16
1-3/4
1-7/8
22210
1-15/16
2
2-3/16
22211
2-1/4
2-3/8
22213
2-7/16
2-1/2
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069805
FC-IP-102R
069837
FC-IP-102RE
069806
FC-IP-103R
069838
FC-IP-103RE
069807
FC-IP-104R
069839
FC-IP-104RE
069808
FC-IP-106R
069840
FC-IP-106RE
069809
FC-IP-107R
069841
FC-IP-107RE
069810
FC-IP-108R
069842
FC-IP-108RE
069811
FC-IP-110R
069843
FC-IP-110RE
069812
FC-IP-111R
069844
FC-IP-111RE
069813
FC-IP-112R
069845
FC-IP-112RE
069814
FC-IP-114R
069846
FC-IP-114RE
069815
FC-IP-115R
069847
FC-IP-115RE
069816
FC-IP-200R
069848
FC-IP-200RE
069817
FC-IP-203R
069849
FC-IP-203RE
069818
FC-IP-204R
069850
FC-IP-204RE
069819
FC-IP-206R
069851
FC-IP-206RE
069820
FC-IP-207R
069852
FC-IP-207RE
069821
FC-IP-208R
069853
FC-IP-208RE
S-2000
Shaft
Size
Inch
Bearing
UNISPHERE II
1-1/8 THRU 2-1/2 INCH
IMPERIAL
UNIFIED SAF
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
2-11/16 THRU 5 INCH
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
Note: 4-7/16 thru 4-15/16

sizes have 6 evenly
spaced mounting holes
UNISPHERE II
IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-84
SELECTION
PAGE B14-14
Shaft
Size
2-11/16
2-3/4
3.50
8.75
2.63
2-15/16
3
3-3/16
3-1/4
4.17
10.25
3.00
3-7/16
3-1/2
3-11/16
3-15/16 4.70
10.88
3.50
4
4-7/16
5.23
13.50
4.00
4-1/2
4-15/16
5.98
14.75
4.38
5
* +0.000, -0.002
** 6 equally spaced mounting holes
FEATURES/BENEFITS
PAGE B14-2
Bearing Reference
Guide
DD
F
Bolt
Dia.
K*
X
Total
Exp
5.30
7.50
1.25
5/8
1.94
0.75
6.375
4.28
5/8-11
3.56
1.56
1.63
1/4
0.03
3.47
6.09
8.63
1.27
3/4
2.53
0.94
7.375
5.00
3/4-10
4.06
1.64
1.52
1/4
0.03
4.05
6.63
9.38
1.47
3/4
2.89
1.13
8.125
5.56
3/4-10
4.39
1.81
1.91
5/16
0.03
4.50
5.88
11.75
1.45
3/4**
3.56
1.00
10.250
6.44
3/4-10
5.55
1.67
1.98
3/8
0.04
5.00
6.38
12.75
1.70
7/8**
3.86
1.25
11.000
7.63
3/4-10
6.28
2.13
2.42
3/8
0.04
5.84
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-85
SELECTION
PAGE B14-14
E-Family Roller
Bearings
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069886
FC-IP-211L
069918
FC-IP-211LE
069887
FC-IP-212L
069919
FC-IP-212LE
069888
FC-IP-215L
069920
FC-IP-215LE
069889
FC-IP-300L
069921
FC-IP-300LE
069890
FC-IP-303L
069922
FC-IP-303LE
069891
FC-IP-304L
069923
FC-IP-304LE
069892
FC-IP-307L
069924
FC-IP-307LE
069893
FC-IP-308L
069925
FC-IP-308LE
069894
FC-IP-311L
069926
FC-IP-311LE
069895
FC-IP-315L
069927
FC-IP-315LE
069896
FC-IP-400L
069928
FC-IP-400LE
069897
FC-IP-407L
069929
FC-IP-407LE
069898
FC-IP-408L
069930
FC-IP-408LE
069899
FC-IP-415L
069931
FC-IP-415LE
069900
FC-IP-500L
069932
FC-IP-500LE
Specialty Tapered
Products
2-11/16
2-3/4
22215
2-15/16
3
3-3/16
3-1/4
22218
3-7/16
3-1/2
3-11/16
22220
3-15/16
4
4-7/16
22222
4-1/2
4-15/16
22226
5
Metric shafe sizes available upon request
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069822
FC-IP-211R
069854
FC-IP-211RE
069823
FC-IP-212R
069855
FC-IP-212RE
069824
FC-IP-215R
069856
FC-IP-215RE
069825
FC-IP-300R
069857
FC-IP-300RE
069826
FC-IP-303R
069858
FC-IP-303RE
069827
FC-IP-304R
069859
FC-IP-304RE
069828
FC-IP-307R
069860
FC-IP-307RE
069829
FC-IP-308R
069861
FC-IP-308RE
069830
FC-IP-311R
069862
FC-IP-311RE
069831
FC-IP-315R
069863
FC-IP-315RE
069832
FC-IP-400R
069864
FC-IP-400RE
069833
FC-IP-407R
069865
FC-IP-407RE
069834
FC-IP-408R
069866
FC-IP-408RE
069835
FC-IP-415R
069867
FC-IP-415RE
069836
FC-IP-500R
069868
FC-IP-500RE
S-2000
Shaft
Size
Inch
Bearing
UNISPHERE II
2-11/16 THRU 5 INCH
IMPERIAL
UNIFIED SAF
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - IP Piloted Flange with Type E Dimensions
1-3/8 THRU 2-1/2 INCH
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
Note: 4-7/16 thru 4-15/16

sizes have 6 evenly
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-86
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - IP Piloted Flange with Type E Dimensions
Shaft
Size
B#
1-3/8
2.63
5.25
1-7/16
1-1/2
1-5/8
2.81
6.13
1-11/16
1-3/4
1-7/8
2.86
6.38
1-15/16
2
2-3/16
3.03
7.13
2-1/4
2-7/16
3.42
7.63
2-1/2
## +0.000
-0.002
# - Reference Dimension Only
C#
DD
E#
F
Bolt
Dia.
H#
K ##
Q#
X
Total
Exp.
1.84
3.09
4.38
0.75
3/8
1.39
0.50
3.625
2.72
3/8-16
2.61
1.23
1.22
3/16
0.02
1.80
1.91
3.63
5.13
0.88
7/16
1.61
0.50
4.250
3.00
7/16-14
2.86
1.20
1.26
1/4
0.02
2.08
2.00
3.80
5.38
0.88
7/16
1.59
0.56
4.500
3.28
7/16-14
2.86
1.26
1.26
1/4
0.02
2.30
2.19
4.25
6.00
1.00
1/2
1.66
0.56
5.000
3.50
1/2-13
3.08
1.38
1.42
1/4
0.03
2.59
2.50
4.59
6.50
1.00
1/2
1.88
0.63
5.500
3.88
1/2-13
3.44
1.55
1.56
1/4
0.03
2.94
FEATURES/BENEFITS
PAGE B14-2
S-2000
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069872
FC-IP-106L
069904
FC-IP-106LE
069873
FC-IP-107L
069905
FC-IP-107LE
071582
EFC-IP-108L
071585
EFC-IP-108LE
069875
FC-IP-110L
069907
EC-IP-110LE
069876
FC-IP-111L
069908
EC-IP-111LE
071583
EFC-IP-112L
071586
EFC-IP-112LE
069878
FC-IP-114L
069910
FC-IP-114LE
069879
FC-IP-115L
069911
FC-IP-115LE
069880
FC-IP-200L
069912
FC-IP-200LE
069881
FC-IP-203L
069913
FC-IP-203LE
071584
EFC-IP-204L
071587
EFC-IP-204LE
069884
FC-IP-207L
069916
FC-IP-207LE
069885
FC-IP-208L
069917
FC-IP-208LE
UNISPHERE II
1-3/8
1-7/16
1-1/2
22209
1-5/8
1-11/16
1-3/4
1-7/8
22210
1-15/16
2
22211
2-3/16
2-1/4
22213
2-7/16
2-1/2
22208
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069808
FC-IP-106R
069840
FC-IP-106RE
069809
FC-IP-107R
069841
FC-IP-107RE
071576
EFC-IP-108R
071579
EFC-IP-108RE
069811
FC-IP-110R
069843
FC-IP-110RE
069812
FC-IP-111R
069844
FC-IP-111RE
071577
EFC-IP-112R
071580
EFC-IP-112RE
069814
FC-IP-114R
069846
FC-IP-114RE
069815
FC-IP-115R
069847
FC-IP-115RE
069816
FC-IP-200R
069848
FC-IP-200RE
069817
FC-IP-203R
069849
FC-IP-203RE
071578
EFC-IP-204R
071581
EFC-IP-204RE
069820
FC-IP-207R
069852
FC-IP-207RE
069821
FC-IP-208R
069853
FC-IP-208RE
IMPERIAL
Shaft
Size*
Note(S): P And G Dimensions Are For Non-Expansion Only

SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-87
SELECTION
PAGE B14-14
UNIFIED SAF
Bearing
Series
Specialty Tapered
Products
E-Family Roller
Bearings
1-3/8 THRU 2-1/2 INCH
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - IP Piloted Flange with Type E Dimension
2-11/16 THRU 5 INCH
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
Note: 4-7/16 thru 4-15/16

sizes have 6 evenly
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-88
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - IP Piloted Flange with Type E Dimension
Shaft
Size
B#
2-11/16
2-3/4
3.50
8.75
2-15/16
3
3-3/16
3-1/4
4.17
10.25
3-7/16
3-1/2
3-15/16
4.70
10.88
4
4-7/16
5.23
13.50
4-1/2
4-15/16
5.98
14.75
5
## +0.000
-0.002
# - Reference Dimension Only
C#
DD
E#
F
Bolt
Dia.
H#
K ##
Q#
X
Total
Exp.
2.63
5.30
7.50
1.25
5/8
1.94
0.75
6.375
4.28
5/8-11
3.56
1.56
1.63
1/4
0.03
3.47
3.00
6.09
8.63
1.26
3/4
2.53
0.94
7.375
5.00
3/4-10
4.06
1.64
1.52
1/4
0.03
4.05
3.50
6.63
9.38
1.47
3/4
2.89
1.13
8.125
5.56
3/4-10
4.78
1.81
1.91
5/16
0.03
4.50
4.58
5.88
11.75
1.45
3/4 **
3.03
0.94
10.250
6.44
3/4-10
5.66
2.20
2.63
3/8
0.04
5.00
4.88
6.38
12.75
1.70
7/8 **
3.40
1.25
11.000
7.63
3/4-10
6.41
2.59
3.01
3/8
0.04
5.84
FEATURES/BENEFITS
PAGE B14-2
S-2000
Labyrinth Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069886
FC-IP-211L
069918
FC-IP-211LE
069887
FC-IP-212L
069919
FC-IP-212LE
069888
FC-IP-215L
069920
FC-IP-215LE
069889
FC-IP-300L
069921
FC-IP-300LE
069890
FC-IP-303L
069922
FC-IP-303LE
069891
FC-IP-304L
069923
FC-IP-304LE
069892
FC-IP-307L
069924
FC-IP-307LE
069893
FC-IP-308L
069925
FC-IP-308LE
069895
FC-IP-315L
069927
FC-IP-315LE
069896
FC-IP-400L
069928
FC-IP-400LE
071280
EFC-IP-407L
071284
EFC-IP-407LE
071281
EFC-IP-408L
071285
EFC-IP-408LE
071282
EFC-IP-415L
071286
EFC-IP-415LE
071283
EFC-IP-500L
071287
EFC-IP-500LE
UNISPHERE II
2-11/16
2-3/4
22215
2-15/16
3
3-3/16
3-1/4
22218
3-7/16
3-1/2
3-15/16
22220
4
4-7/16
22222
4-1/2
4-15/16
22226
5
TRIDENT Seal
Non-Expansion
Expansion
Part No.
Part Name
Part No.
Part Name
069822
FC-IP-211R
069854
FC-IP-211RE
069823
FC-IP-212R
069855
FC-IP-212RE
069824
FC-IP-215R
069856
FC-IP-215RE
069825
FC-IP-300R
069857
FC-IP-300RE
069826
FC-IP-303R
069858
FC-IP-303RE
069827
FC-IP-304R
069859
FC-IP-304RE
069828
FC-IP-307R
069860
FC-IP-307RE
069829
FC-IP-308R
069861
FC-IP-308RE
069831
FC-IP-315R
069863
FC-IP-315RE
069832
FC-IP-400R
069864
FC-IP-400RE
071272
EFC-IP-407R
071276
EFC-IP-407RE
071273
EFC-IP-408R
071277
EFC-IP-408RE
071274
EFC-IP-415R
071278
EFC-IP-415RE
071275
EFC-IP-500R
071279
EFC-IP-500RE
IMPERIAL
Shaft
Size*
Note(S): P And G Dimensions Are For Non-Expansion Only


** 4-7/16 Thru 5 Have (6) Equally Spaced Mounting Holes
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-89
SELECTION
PAGE B14-14
UNIFIED SAF
Bearing
Series
Specialty Tapered
Products
E-Family Roller
Bearings
2-11/16 THRU 5 INCH
Bearing Reference
Guide
DIMENSIONS
Steel IMPERIAL-HD Piloted Flange
E-Family Roller
Bearings
Specialty Tapered
Products
Y
MAX
S-2000
Z
MIN
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-90
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-91
Description
SFC-IP-102RE
SFC-IP-103RE
SFC-IP-104RE
SFC-IP-106RE
SFC-IP-107RE
SFC-IP-108RE
SFC-IP-110RE
SFC-IP-111RE
SFC-IP-112RE
SFC-IP-114RE
SFC-IP-115RE
SFC-IP-200RE
SFC-IP-203RE
SFC-IP-204RE
SFC-IP-207RE
SFC-IP-208RE
SFC-IP-211RE
SFC-IP-212RE
SFC-IP-215RE
SFC-IP-300RE
SFC-IP-303RE
SFC-IP-304RE
SFC-IP-307RE
SFC-IP-308RE
SFC-IP-311RE
SFC-IP-315RE
SFC-IP-400RE
SFC-IP-407RE
SFC-IP-408RE
SFC-IP-415RE
SFC-IP-500RE
SELECTION
PAGE B14-14
S-2000
Dodge Part No.

072307
072308
072309
072310
072311
072312
072313
072314
072315
072316
072317
072318
072319
072320
072321
072322
072323
072324
072325
072326
072327
072328
072329
072330
072331
072332
072333
072334
072335
072336
072337
UNISPHERE II
Dodge Expansion
Description
SFC-IP-102R
SFC-IP-103R
SFC-IP-104R
SFC-IP-106R
SFC-IP-107R
SFC-IP-108R
SFC-IP-110R
SFC-IP-111R
SFC-IP-112R
SFC-IP-114R
SFC-IP-115R
SFC-IP-200R
SFC-IP-203R
SFC-IP-204R
SFC-IP-207R
SFC-IP-208R
SFC-IP-211R
SFC-IP-212R
SFC-IP-215R
SFC-IP-300R
SFC-IP-303R
SFC-IP-304R
SFC-IP-307R
SFC-IP-308R
SFC-IP-311R
SFC-IP-315R
SFC-IP-400R
SFC-IP-407R
SFC-IP-408R
SFC-IP-415R
SFC-IP-500R
IMPERIAL
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-11/16
3-15/16
4
4-7/16
4-1/2
4-15/16
5
Dodge Non-Expansion
Dodge Part No.
072276
072277
072278
072279
072280
072281
072282
072283
072284
072285
072286
072287
072288
072289
072290
072291
072292
072293
072294
072295
072296
072297
072298
072299
072300
072301
072302
072303
072304
072305
072306
UNIFIED SAF
Shaft Size
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
DIMENSIONS
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-92
SELECTION
PAGE B14-14
DD
1-1/8
1-3/16
1-1/4
2.63 5.25 1.94
3.09
4.38
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16 2.81 6.13 2.19
3.63
5.13
1-3/4
1-7/8
1-15/16 2.86 6.38 2.15
3.80
5.38
2
2-3/16
3.03 7.13 2.42
4.25
6.00
2-1/4
2-3/8
2-7/16
3.43 7.63 2.66
4.60
6.50
2-1/2
2-11/16
2-3/4
3.50 8.75 2.83
5.30
7.50
2-15/16
3
3-3/16
3-1/4
4.17 10.25 3.31
6.10
8.63
3-7/16
3-1/2
3-11/16
3-15/16 4.70 10.88 3.73
6.63 9.375
4
4-7/16
5.23 13.50 4.31
5.86 11.75
4-1/2
4-15/16
5.98 14.75 4.64
6.38 12.75
5
P & G Are For Non-Expansion Only
* +0.000 / -0.002
4-7/16 Thru 5 have 6 equally spaced mounting holes
FEATURES/BENEFITS
PAGE B14-2
Bearing Reference
Guide
F
Bolt
Dia
K*
X
Total
Exp
7/16
1.61
.50
3.625
2.72
7/16-14
2.78
1.01
1.17
3/16
0.02
1.80
1.33
7/16
1.44
.31
4.250
3.00
7/16-14
3.05
1.36
1.61
1/4
0.02
2.08
1.03
7/16
1.63
.50
4.500
3.28
7/16-14
3.05
1.23
1.42
1/4
0.02
2.30
1.02
1/2
1.80
.56
5.000
3.50
1/2-13
3.34
1.21
1.55
1/4
0.03
2.59
1.25
1/2
1.86
0.50
5.500
3.80
1/2-13
3.61
1.57
1.75
1/4
0.03
2.94
1.44
5/8
1.89
0.63
6.375
4.20
5/8-11
3.77
1.60
1.88
1/4
0.03
3.47
1.34
3/4
2.46
0.88
7.375
5.00
3/4-10
4.34
1.70
1.88
1/4
0.03
4.05
1.85
3/4
2.58
1.00
8.125
5.44
3/4-10
4.83
2.14
2.25
3/16
0.03
4.50
1.90
3/4**
3.01
1.00
10.250
6.34
3/4-10
5.70
2.72
2.70
3/8
0.04
5.00
2.06
7/8**
2.98
1.03
11.000
7.54
7/8-9
6.08
3.00
3.10
3/8
0.04
5.84
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-93
SELECTION
PAGE B14-14
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
Shaft
Size
IMPERIAL
UNIFIED SAF
DIMENSIONS
Bearing Reference
Guide
DIMENSIONS
Steel IMPERIAL-HD Narrow Piloted Flange
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
Shaft
Size
UNISPHERE II
IMPERIAL
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-11/16
3-15/16
4
4-7/16
4-1/2
Dodge Non-Expansion
Dodge Part No.
072338
072339
072340
072341
072342
072343
072344
072345
072346
072347
072348
072349
072350
072351
072352
072353
072354
072355
072356
072358
072359
072360
072361
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
Dodge Expansion
Description
SFCN-IP-107R
SFCN-IP-108R
SFCN-IP-111R
SFCN-IP-112R
SFCN-IP-115R
SFCN-IP-200R
SFCN-IP-203R
SFCN-IP-204R
SFCN-IP-207R
SFCN-IP-208R
SFCN-IP-211R
SFCN-IP-212R
SFCN-IP-215R
SFCN-IP-300R
SFCN-IP-303R
SFCN-IP-304R
SFCN-IP-307R
SFCN-IP-308R
SFCN-IP-311R
SFCN-IP-315R
SFCN-IP-400R
SFCN-IP-407R
SFCN-IP-408R
Dodge Part No.

072362
072363
072364
072365
072366
072367
072368
072369
072370
072371
072372
072373
072374
072375
072376
072377
072378
072379
072380
072382
072383
072384
072385
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-94
Description
SFCN-IP-107RE
SFCN-IP-108RE
SFCN-IP-111RE
SFCN-IP-112RE
SFCN-IP-115RE
SFCN-IP-200RE
SFCN-IP-203RE
SFCN-IP-204RE
SFCN-IP-207RE
SFCN-IP-208RE
SFCN-IP-211RE
SFCN-IP-212RE
SFCN-IP-215RE
SFCN-IP-300RE
SFCN-IP-303RE
SFCN-IP-304RE
SFCN-IP-307RE
SFCN-IP-308RE
SFCN-IP-311RE
SFCN-IP-315RE
SFCN-IP-400RE
SFCN-IP-407RE
SFCN-IP-408RE
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
DD
1-7/16
2.63
5.25
1.93
3.09
4.38
1-1/2
1-11/16
2.81
6.13
1.95
3.62
5.13
1-3/4
1-15/16
2.86
6.38
2.10
3.80
5.38
2
2-3/16
3.03
7.30
2.22
4.24
6.00
2-1/4
2-7/16
3.42
7.63
2.35
4.60
6.50
2-1/2
2-11/16
2-3/4
3.50
8.75
2.47
5.30
7.50
2-15/16
3
3-3/16
3-1/4
4.17 10.34 2.79
6.10
8.63
3-7/16
3-1/2
3-11/16
3-15/16
4.70 10.88 3.61
6.63
9.38
4
4-7/16
5.23 13.50 3.80
5.89 11.75
4-1/2
P & G ARE FOR NON-EXPANSION ONLY
A & P DIMENSIONS DO NOT INCLUDE Y DIMENSION
* +0.000 / -0.002
** 6 holes, equally spaced
FEATURES/BENEFITS
PAGE B14-2
F
Bolt
Dta.
K*
X
Total
Exp
7/16
1.84
0.50
3.625
2.72
7/16 - 14
2.78
0.79
.94
3/16
0.02
1.80
7/16
2.09
0.50
4.250
3.00
7/16 - 14
2.97
0.73
.88
1/4
0.02
2.08
7/16
1.99
0.63
4.500
3.28
7/16 - 14
3.05
0.88
1.06
1/4
0.02
2.30
1/2
2.06
0.58
5.000
3.50
1/2-13
3.19
1.00
1.13
1/4
0.02
2.59
1/2
2.40
0.70
5.500
3.80
1/2-13
3.53
1.04
1.13
1/4
0.03
2.94
5/8
2.35
0.81
6.375
4.20
5/8 - 11
3.60
1.15
1.25
1/4
0.03
3.47
3/4
2.88
1.00
7.375
5.00
3/4 - 10
4.19
1.30
1.31
1/4
0.03
4.05
3/4
2.82
1.01
8.125
5.45
3/4 - 10
4.95
1.88
2.13
5/16
0.03
4.50
3/4 **
3.51
1.01
10.250
6.34
3/4 - 10
5.41
1.74
1.90
3/8
0.04
5.00
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-95
SELECTION
PAGE B14-14
UNISPHERE II
IMPERIAL
UNIFIED SAF
Shaft
Size
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
Steel IMPERIAL-HD Narrow Piloted Flange
Bearing Reference
Guide
DIMENSIONS
IMPERIAL - IP Wide Slot Take-Up
1-1/8 THRU 2-1/4 INCH
D
E-Family Roller
Bearings
N M
Specialty Tapered
Products
G
H
E
B
S-2000
Y
MAX
R
S
S
UNISPHERE II
Z
MIN
A
IMPERIAL
T
NON-EXPANSION
EXPANSION
UNIFIED SAF
NOTE: See page B14-94 for 2-3/8 THRU 4

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-96
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
E-Family Roller
Bearings
1-1/8 THRU 2-1/4 INCH
CP-400
CP-400
CP-408
Part Name
WSTU-IP-102RE
WSTU-IP-103RE
WSTU-IP-104RE
WSTU-IP-106RE
WSTU-IP-107RE
WSTU-IP-108RE
WSTU-IP-110RE
WSTU-IP-111RE
WSTU-IP-112RE
WSTU-IP-114RE
WSTU-IP-115RE
WSTU-IP-200RE
WSTU-IP-203RE
WSTU-IP-204RE
X
Total
Exp
2.63
5.06
0.53
2.75
3.19
7/8
0.69
0.63
2.44
1.44
2.72
3.50
4.13
2.83
1.73
2.06
3/16
0.02
1.80
2.81
5.94
0.69
3.13
3.81
1-1/8
0.94
0.75
3.31
1.94
3.00
4.00
4.75
2.97
1.98
2.03
1/4
0.02
2.08
2.86
6.19
0.69
3.63
3.94
1-1/8
0.94
0.75
3.31
1.94
3.28
4.00
4.75
2.94
2.00
2.00
1/4
0.02
2.30
3.03
7.06
0.81
3.63
4.63
1-3/8
0.94
1.25
3.88
2.25
3.50
4.50
5.25
3.19
2.11
2.22
1/4
0.03
2.60
1-1/8
1-3/16
1-1/4
1-3/8
Specialty Tapered
Products
CP-308
Expansion
Part No.
069368
069369
069370
069371
069372
069373
069374
069375
069376
069377
069378
069379
069380
069381
S-2000
1-1/8
1-3/16
1-1/4
22208
1-3/8
1-7/16
1-1/2
1-5/8
22209
1-11/16
1-3/4
1-7/8
22210
1-15/16
2
2-3/16
22211
2-1/4
See Page B15-20 for CP. Take-Up Frame
Shaft
Size
TRIDENT Seal
Non-Expansion
Part No.
Part Name
069340
WSTU-IP-102R
069341
WSTU-IP-103R
069342
WSTU-IP-104R
069343
WSTU-IP-106R
069344
WSTU-IP-107R
069345
WSTU-IP-108R
069346
WSTU-IP-110R
069347
WSTU-IP-111R
069348
WSTU-IP-112R
069349
WSTU-IP-114R
069350
WSTU-IP-115R
069351
WSTU-IP-200R
069352
WSTU-IP-203R
069353
WSTU-IP-204R
Take-Up
Frame
UNISPHERE II
Shaft
Size
Inch
Bearing
1-7/16
1-1/2
1-3/4
1-7/8
1-15/16
IMPERIAL
1-5/8
1-11/16
2-3/16
2-1/4
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-97
SELECTION
PAGE B14-14
UNIFIED SAF
Bearing Reference
Guide
DIMENSIONS
2-3/8 THRU 4 INCH
D
E-Family Roller
Bearings
Specialty Tapered
Products
G
H
E
B
S-2000
Y
MAX
S
Z
MIN
X
UNISPHERE II
IMPERIAL
NON-EXPANSION
EXPANSION
UNIFIED SAF

FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-98
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
E-Family Roller
Bearings
2-3/8 THRU 4 INCH
CP-515
CP-613
CP-810
Part Name
WSTU-IP-206RE
WSTU-IP-207RE
WSTU-IP-208RE
WSTU-IP-211RE
WSTU-IP-212RE
WSTU-IP-215RE
WSTU-IP-300RE
WSTU-IP-303RE
WSTU-IP-304RE
WSTU-IP-307RE
WSTU-IP-308RE
WSTU-IP-311RE
WSTU-IP-315RE
WSTU-IP-400RE
Specialty Tapered
Products
CP-502
Expansion
Part No.
069382
069383
069384
069385
069386
069387
069388
069389
069390
069391
069392
069393
069394
069395
S-2000
2-3/8
22213
2-7/16
2-1/2
2 -11/16
2-3/4
22215
2-15/16
3
3-3/16
3-1/4
22218
3-7/16
3-1/2
3-11/16
22220
3-15/16
4
See Page B15-20 for CP Take-U Frame
Shaft
Size
TRIDENT Seal
Non-Expansion
Part No.
Part Name
069354
WSTU-IP-206R
069355
WSTU-IP-207R
069356
WSTU-IP-208R
069357
WSTU-IP-211R
069358
WSTU-IP-212R
069359
WSTU-IP-215R
069360
WSTU-IP-300R
069361
WSTU-IP-303R
069362
WSTU-IP-304R
069363
WSTU-IP-307R
069364
WSTU-IP-308R
069365
WSTU-IP-311R
069366
WSTU-IP-315R
069367
WSTU-IP-400R
Take-Up
Frame
X
A
Total
Exp
3.42
7.69
1.06
4.38
5.00
1-3/8
1.06
1.25
4.25
2.50
3.88
5.13
5.88
3.44
2.22
2.44
1/4
0.03
2.95
3.50
8.88
1.81
4.50
5.75
1-5/8
1.13
1.50
4.88
2.75
4.28
5.94
6.69
3.67
2.28
2.69
1/4
0.03
3.47
4.16
10.06
1.81
5.50
6.38
1-7/8
1.06
1.63
5.13
2.88
5.00
6.81
7.81
4.22
2.69
3.06
1/4
0.03
4.05
4.70
12.56
2.06
7.00
8.38
2-1/8
2.06
2.13
6.00
3.38
5.56
8.63
9.44
4.80
3.05
3.44
5/16
0.03
4.50
2-3/8
2-7/16
UNISPHERE II
Shaft
Size
nch
Bearing
2-1/2
2 -11/16
2-3/4
2-15/16
3-1/4
3-7/16
3-1/2
IMPERIAL
3
3-3/16
3-11/16
3-15/16
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-99
SELECTION
PAGE B14-14
UNIFIED SAF
Bearing Reference
Guide
DIMENSIONS
IMPERIAL Bearing Insert
1-1/8 THRU 2-1/4 INCH
B
E-Family Roller
Bearings
D
SHAFT
SIZE
SHAFT
SIZE
Specialty Tapered
Products
TRIDENT SEAL
LABYRINTH SEAL
S-2000
UNISPHERE II
IMPERIAL
TRIDENT Seal
Labyrinth Seal
Part Number Part Name Part Number Part Name
1-1/8
070880
INS-IP-102R
070912
INS-IP-102L
1-3/16
070881
INS-IP-103R
070913
INS-IP-103L
1-1/4
070882
INS-IP-104R
070914
INS-IP-104L
22208
1-3/8
070883
INS-IP-106R
070915
INS-IP-106L
1-7/16
070884
INS-IP-107R
070916
INS-IP-107L
1-1/2
070885
INS-IP-108R
070917
INS-IP-108L
1-1/2 *
071590
INS-IPE-108R
071593
INS-IPE-108L
1-5/8
070886
INS-IP-110R
070918
INS-IP-110L
22209
1-11/16
070887
INS-IP-111R
070919
INS-IP-111L
1-3/4
070888
INS-IP-112R
070920
INS-IP-112L
1-3/4 *
071591
INS-IPE-112R
071594
INS-IPE-112L
1-7/8
070889
INS-IP-114R
070921
INS-IP-114L
22210
1-15/16
070890
INS-IP-115R
070922
INS-IP-115L
2
070891
INS-IP-200R
070923
INS-IP-200L
2-3/16
070892
INS-IP-203R
070924
INS-IP-203L
22211
2-1/4
070893
INS-IP-204R
070925
INS-IP-204L
* Inserts for IMPERIAL-Type E dimensioned housings only
Bearing
Series
Shaft Size
Inch
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
3.15
0.95
2.63
0.97
2.72
3.35
0.95
2.81
0.95
3.00
3.54
0.95
2.86
0.98
3.28
3.94
1.05
3.03
1.05
3.50
PAGE B14-8
B14-100
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
IMPERIAL Bearing Insert
2-3/8 THRU 5 INCH
B
E-Family Roller
Bearings
D
SHAFT
SIZE
SHAFT
SIZE
LABYRINTH SEAL
TRIDENT Seal
Labyrinth Seal
Part Number Part Name Part Number Part Name
2-1/4 *
071592
INS-IPE-204R
071595
INS-IPE-204L
2-3/8
070894
INS-IP-206R
070926
INS-IP-206L
22213
2-7/16
070895
INS-IP-207R
070927
INS-IP-207L
2-1/2
070896
INS-IP-208R
070928
INS-IP-208L
2-11/16
070897
INS-IP-211R
070929
INS-IP-211L
2-3/4
070898
INS-IP-212R
070930
INS-IP-212L
22215
2-15/16
070899
INS-IP-215R
070931
INS-IP-215L
3
070900
INS-IP-300R
070932
INS-IP-300L
3-3/16
070901
INS-IP-303R
070933
INS-IP-303L
3-1/4
070902
INS-IP-304R
070934
INS-IP-304L
22218
3-7/16
070903
INS-IP-307R
070935
INS-IP-307L
3-1/2
070904
INS-IP-308R
070936
INS-IP-308L
3-11/16
070905
INS-IP-311R
070937
INS-IP-311L
22220
3-15/16
070906
INS-IP-315R
070938
INS-IP-315L
4
070907
INS-IP-400R
070939
INS-IP-400L
4-7/16
070908
INS-IP-407R
070940
INS-IP-407L
22222
4-1/2
070909
INS-IP-408R
070941
INS-IP-408L
4-15/16
070910
INS-IP-415R
070942
INS-IP-415L
22226
5
070911
INS-IP-500R
070943
INS-IP-500L
* Insert for IMPERIAL-Type E dimensioned housings only
Bearing
Series
Shaft
Size
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
4.72
1.28
3.42
1.21
3.88
5.12
1.28
3.50
1.22
4.28
6.30
1.63
4.17
1.48
5.00
7.09
1.88
4.70
1.65
5.56
7.87
2.16
5.23
1.94
6.44
9.06
2.59
5.98
2.11
7.63
PAGE B14-8
B14-101
SELECTION
PAGE B14-14
UNISPHERE II
TRIDENT SEAL
IMPERIAL
UNIFIED SAF
S-2000
Specialty Tapered
Products
Bearing Reference
Guide
DIMENSIONS
IMPERIAL Bearing Insert - For Large Bore ISAF Housings
5-7/16 THRU 7 INCH
B
E-Family Roller
Bearings
D
SHAFT
SIZE
SHAFT
SIZE
Specialty Tapered
Products
TRIDENT SEAL
LABYRINTH SEAL
S-2000
Bearing
Series
22228
22232
UNISPHERE II
22236
Shaft Size
TRIDENT Seal
Labyrinth Seal
Part Number
037933
037934
037935
037936
037937
037938
037939
IMPERIAL
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
Part Number
037925
037926
037927
037928
037929
037930
037931
Part Name
INS-IP-507R
INS-IP-508R
INS-IP-515R
INS-IP-600R
INS-IP-607R
INS-IP-608R
INS-IP-615R
Part Name
INS-IP-507L
INS-IP-508L
INS-IP-515L
INS-IP-600L
INS-IP-607L
INS-IP-608L
INS-IP-615L
037932
INS-IP-700R
037940
INS-IP-700L
9.84
2.75
6.17
2.34
8.75
11.42
3.22
7.08
2.77
10.25
12.60
3.47
7.39
2.86
11.41

Shaft
Size
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-102
SELECTION
PAGE B14-14
ISAF housings with embedded thermocouple probe and
Shaft Size
Series
adapter plate.
STEP 2: Bearing Insert

Select insert based on shaft size and seal choice. Locknut
contains holes for prox target attachment.
207
515
063765
215
517
063766
307
520
063767
315
522
063768
407
526
063769
415
528
063770
Shaft Size
Contact Seal
Labyrinth Seals
207
070895
070927
215
070899
070931
307
070903
070935
315
070906
070938
407
048385
048389
415
048386
048390
Shaft Size
Housing Series
Part Number
207
515
063771
215
517
063772
307
520
063773
315
522
063774
407
526
063775
415
528
063776
S-2000
Part Numbers
Drilled Housing For
Temperature or
Vibration
Bearing Reference
Guide
STEP 1: The Housing Choices
E-Family Roller
Bearings
How To Order ISAF Smart Stock Selections
Specialty Tapered
Products
DIMENSIONS
STEP 3: The Sensor Choices
FEATURES/BENEFITS
PAGE B14-2
ISAF Sensor Kits
Part Number
AC Prox
055940
Thermocouple Transmitter
055931
4-20mA Accelerometer and Thermocouple
067576
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-103
SELECTION
PAGE B14-14
UNISPHERE II
IMPERIAL
Prox Covers
For speed monitoring, select prox cover and AC prox kit

(055940), AC for PLC monitoring.
For temperature monitoring, select the Thermocouple
Transmitter kit 055931.
For temperature and vibration monitoring, select 067576.
UNIFIED SAF
Bearing Reference
Guide
DIMENSIONS
IMPERIAL Spanner Wrench
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
Shaft
Size
1-1/8
thru
1-1/2
1-5/8
thru
1-3/4
1-7/8
thru
2
2-3/16
2-1/4
2-3/8
thru
2-1/2
2-11/16
thru
3
3-3/16
thru
3-1/2
3-11/16
thru
4
4-7/16
4-1/2
4-15/16
5
5-7/16
5-1/2
5-15/16
6
6-7/16
thru
7
Part
Number
066629
10.84
9.00
0.88
1.63
2.28
1.14
0.32
0.50
066630
11.04
9.00
0.88
1.88
2.48
1.24
0.32
0.50
066631
11.20
9.00
0.88
2.13
2.72
1.36
0.32
0.50
066632
12.38
10.00
0.88
2.38
2.98
1.49
0.44
0.50
066633
12.63
10.00
1.31
2.63
3.40
1.70
0.44
0.50
066634
16.90
14.00
1.31
3.13
3.80
1.90
0.44
0.50
066635
17.39
14.00
1.31
3.63
4.36
2.18
0.44
0.50
066636
17.75
14.00
1.75
4.13
4.91
2.46
0.44
0.50
066637
20.36
16.00
1.75
4.63
5.68
2.84
0.44
0.50
066638
25.17
20.00
2.00
5.13
6.88
3.44
0.44
0.50
066642
27.82
22.00
2.00
5.63
8.05
4.03
0.69
0.50
066643
28.75
22.00
2.00
6.13
9.13
4.57
0.75
0.50
066644
31.54
24.00
2.00
7.13
10.08
5.04
0.75
0.50
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-104
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
E-Family Roller
Bearings
IMPERIAL Lockplate Kit
XXXXXX
Specialty Tapered
Products
The Lockplate Kits consists of:

Lockplate
2 Socket Head Capscrews
2 Lockwashers
Part
Number
048925
048926
S-2000
Shaft Size
Inch
1-7/16
1-11/16
1-15/16
2 SM
2 LG
2-3/16
2-3/8
048927
048928
2-11/16
2-3/4
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
UNISPHERE II
048929
2-7/16
048930
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-105
SELECTION
PAGE B14-14
UNIFIED SAF
IMPERIAL
048931
048932
048933
048934
Bearing Reference
Guide
DIMENSIONS
Steel IMPERIAL Open End Covers
E-Family Roller
Bearings
Specialty Tapered
Products
Front End
Shaft
Size
IMPERIAL
Backside
E-IMPERIAL
IMPERIAL
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
Dodge
Dodge
Description
Description
Part No.
Part No.
1-1/8
070160
IPECO-08-102
070160
IPECO-08-102
1-3/16
070161
IPECO-08-103
070161
IPECO-08-103
1-1/4
070162
IPECO-08-104
070162
IPECO-08-104
1-3/8
070163
IPECO-08-106
070163
IPECO-08-106
1-7/16
070164
IPECO-08-107
070164
IPECO-08-107
1-1/2
070165
IPECO-08-108
070166
IPECO-09-108
1-5/8
070167
IPECO-09-110
070167
IPECO-09-110
1-11/16
070168
IPECO-09-111
070168
IPECO-09-111
1-3/4
070169
IPECO-09-112
070170
IPECO-10-112
1-7/8
070171
IPECO-10-114
070171
IPECO-10-114
1-15/16
070172
IPECO-10-115
070172
IPECO-10-115
2
070173
IPECO-10-200
070173
IPECO-10-200
2-3/16
070174
IPECO-11-203
070174
IPECO-11-203
2-1/4
070175
IPECO-11-204
070176
S2IPECO-13-204
2-3/8
070177
S2IPECO-13-206
070177
S2IPECO-13-206
2-7/16
070178
S2IPECO-13-207
070178
S2IPECO-13-207
2-1/2
070179
S2IPECO-13-208
070179
S2IPECO-13-208
2-11/16
070180
IPECO-15-211
070180
IPECO-15-211
2-3/4
070181
IPECO-15-212
070181
IPECO-15-212
2-15/16
070182
IPECO-15-215
070182
IPECO-15-215
3
070183
IPECO-15-300
070183
IPECO-15-300
3-3/16
070184
S2IPECO-18-303
070184
S2IPECO-18-303
3-1/4
070185
S2IPECO-18-304
070185
S2IPECO-18-304
3-7/16
070186
S2IPECO-18-307
070186
S2IPECO-18-307
3-1/2
070187
S2IPECO-18-308
070187
S2IPECO-18-308
3-11/16
070188
S2IPECO-20-311
070188
S2IPECO-20-311
3-15/16
070189
S2IPECO-20-315
070189
S2IPECO-20-315
4
070190
S2IPECO-20-400
070190
S2IPECO-20-400
4-7/16
070191
S2IPECO-22-407
070191
S2IPECO-22-407
4-1/2
070192
S2IPECO-22-408
070192
S2IPECO-22-408
4-15/16
070193
S2IPECO-26-415
070193
S2IPECO-26-415
5
070194
S2IPECO-26-500
070194
S2IPECO-26-500
NOTE: ISAF product will use the same front end covers on the sides of the housing
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
Dodge
Part No.
072500
072501
072502
072503
072504
072505
072507
072508
072509
072511
072512
072513
072514
072515
072517
072518
072519
072520
072521
072522
072523
072524
072525
072526
072527
072528
072529
072530
072531
072533
072534
072536
Description
S2IPBECO-08-102
S2IPBECO-08-103
S2IPBECO-08-104
S2IPBECO-08-106
S2IPBECO-08-107
S2IPBECO-08-108
S2IPBECO-09-110
S2IPBECO-09-111
S2IPBECO-09-112
S2IPBECO-10-114
S2IPBECO-10-115
S2IPBECO-10-200
S2IPBECO-11-203
S2IPBECO-11-204
S2IPBECO-13-206
S2IPBECO-13-207
S2IPBECO-13-208
S2IPBECO-15-211
S2IPBECO-15-212
S2IPBECO-15-215
S2IPBECO-15-300
S2IPBECO-18-303
S2IPBECO-18-304
S2IPBECO-18-307
S2IPBECO-18-308
S2IPBECO-20-311
S2IPBECO-20-315
S2IPBECO-20-400
IPBECO-22-407
IPBECO-22-408
IPBECO-26-415
IPBECO-26-500
PAGE B14-8
B14-106
E-IMPERIAL
Dodge
Part No.
072500
072501
072502
072503
072504
072506
072507
072508
072510
072511
072512
072513
072514
072516
072517
072518
072519
072520
072521
072522
072523
072524
072525
072526
072527
072528
072529
072530
072531
072533
072534
072536
Description
S2IPBECO-08-102
S2IPBECO-08-103
S2IPBECO-08-104
S2IPBECO-08-106
S2IPBECO-08-107
S2IPBECO-09-108
S2IPBECO-09-110
S2IPBECO-09-111
S2IPBECO-10-112
S2IPBECO-10-114
S2IPBECO-10-115
S2IPBECO-10-200
S2IPBECO-11-203
S2IPBECO-13-204
S2IPBECO-13-206
S2IPBECO-13-207
S2IPBECO-13-208
S2IPBECO-15-211
S2IPBECO-15-212
S2IPBECO-15-215
S2IPBECO-15-300
S2IPBECO-18-303
S2IPBECO-18-304
S2IPBECO-18-307
S2IPBECO-18-308
S2IPBECO-20-311
S2IPBECO-20-315
S2IPBECO-20-400
IPBECO-22-407
IPBECO-22-408
IPBECO-26-415
IPBECO-26-500
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
Dodge Part No.

069960
069961
069961
069962
069962
069963
069964
069964
069965
069966
069967
069968
069969
Description
IPEC08
IPEC09
IPEC09
IPEC10
IPEC10
IPEC11
IPEC13
IPEC13
IPEC15
IPEC18
S2IPEC20
S2IPEC22
S2IPEC26
S-2000
E-IMPERIAL
Description
IPEC08
IPEC08
IPEC09
IPEC09
IPEC10
IPEC11
IPEC11
IPEC13
IPEC15
IPEC18
S2IPEC20
S2IPEC22
S2IPEC26
FEATURES/BENEFITS
PAGE B14-2
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-107
SELECTION
PAGE B14-14
UNIFIED SAF
IMPERIAL
1-1/8 to 1-7/16
1-1/2
1-5/8 to 1-11/16
1-3/4
1-7/8 to 2
2-3/16
2-1/4
2-3/8 to 2-1/2
2-11/16 to 3
3-3/16 to 3-1/2
3-11/16 to 4
4-7/16 to 4-1/2
4-15/16 to 5
IMPERIAL
Dodge Part No.
069960
069960
069961
069961
069962
069963
069963
069964
069965
069966
069967
069968
069969
UNISPHERE II
Shaft
Size
Specialty Tapered
Products
E-Family Roller
Bearings
Steel IMPERIAL Closed End Covers
Bearing Reference
Guide
DIMENSIONS
IP End Cover
E-Family Roller
Bearings
Specialty Tapered
Products
Shaft
Size
S-2000
UNISPHERE II
IMPERIAL
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
1-1/8
Thru
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
Thru
2-1/4
2-3/8
2-7/16
2-1/2
2-11/16
Thru
3
3-3/16
Thru
3-1/2
3-11/16
Thru
4
IP
Pillow
Block
(2 Bolt)
2.03
1.97
2.10
2.22
2.16
2.25
2.31
2.25
2.45
2.47
2.41
2.54
2.53
2.44
2.77
2.65
2.56
3.06
3.07
2.94
3.31
3.49
3.36
3.80
4-7/16
Thru
4-1/2
N/A
4-15/16
Thru
5
N/A
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
IP
Pillow
Block
(4 Bolt)
IP
Piloted
Flange
1.67
1.61
2.46
1.83
1.77
2.60
1.92
1.86
2.83
2.00
1.94
3.00
2.18
2.09
3.24
2.29
2.20
3.54
2.91
2.78
3.59
3.32
3.19
4.13
4.02
3.89
4.16
4.24
4.11
4.91
N/A
N/A
N/A
N/A
2.53
2.44
2.77
2.65
2.56
3.06
3.07
2.94
3.31
3.49
3.36
3.80
3.96
3.83
4.23
4.49
4.36
4.69
SPECIFICATIONS
PAGE B14-5
IP
Round
Flange
3.12
3.06
0.99
3.33
3.27
1.10
3.47
3.41
1.28
3.69
3.63
1.32
4.04
3.95
1.37
4.18
4.09
1.66
IP
Square
Flange
3.45
3.39
0.99
4.07
4.01
1.10
3.95
3.89
1.28
4.53
4.47
1.32
4.72
4.63
1.37
5.06
4.97
1.66
5.78
5.65
1.63
7.17
7.04
1.94
Wide
Slot
Take-Up
2.06
2.00
2.10
2.19
2.13
2.25
2.25
2.19
2.45
2.42
2.36
2.54
2.53
2.44
2.77
2.70
2.61
3.06
3.07
2.94
3.31
3.52
3.39
3.80
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
PAGE B14-8
B14-108
SELECTION
PAGE B14-14
Bearing Reference
Guide
DIMENSIONS
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
Thru
3
3-3/16
Thru
3-1/2
3-15/16
Thru
4
4-7/16
Thru
4-1/2
4-15/16
Thru
5
FEATURES/BENEFITS
PAGE B14-2
N/A
N/A
N/A
N/A
N/A
N/A
2.53
2.44
2.77
2.63
2.54
3.06
3.04
2.91
3.31
3.80
3.67
3.80
3.91
3.78
4.23
4.46
4.33
4.69
N/A
2.94
3.19
3/4
3.27
3.39
7/8
3.52
3.61
1-1/64
3.77
3.95
1-1/32
4.41
4.64
4.92
5.06
1-7/32
5.98
6.22
1-1/8
6.67
6.91
1-3/8
7.31
7.56
1-43/64
8.44
8.69
1-29/32
SPECIFICATIONS
PAGE B14-5
Shaft
Size
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
PAGE B14-8
B14-109
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
ISAF
Pillow
Block
(2 Bolt)
2.04
1.98
2.05
2.20
2.14
2.18
2.35
2.29
2.37
2.46
2.40
2.44
2.74
2.65
2.69
2.83
2.74
2.94
2.83
2.74
2.98
3.31
3.18
3.26
3-15/16
N/A
4-7/16
N/A
4-15/16
N/A
SELECTION
PAGE B14-14
ISAF
Pillow
Block
(4 Bolt)
N/A
N/A
N/A
S-2000
N/A
E-IP
Square
Flange
3.45
3.39
1.20
4.07
4.01
1.20
3.95
3.89
1.38
4.53
4.47
1.43
4.72
4.63
1.69
5.06
4.97
1.62
5.78
5.65
1.38
7.17
7.04
2.06
7.62
7.49
4.23
N/A
2.74
2.65
2.69
2.83
2.74
2.94
2.83
2.74
2.98
3.31
3.18
3.26
3.70
3.57
3.68
4.05
3.92
4.02
4.55
4.42
4.49
UNISPHERE II
1-3/8
Thru
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
Thru
2
E-IP
Piloted
Flange
1.67
1.61
2.46
1.83
1.77
2.60
1.92
1.86
2.83
2.00
1.94
3.00
2.18
2.09
3.24
2.29
2.20
3.54
2.91
2.78
3.59
3.31
3.19
4.13
3.85
3.72
4.68
4.08
3.95
5.37
IMPERIAL
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
A Open
B Closed
C Open
E-IP
Pillow
Block
(4 Bolt)
UNIFIED SAF
Shaft
Size
E-IP
Pillow
Block
(2 Bolt)
2.03
1.97
2.07
2.22
2.16
2.22
2.31
2.25
2.45
2.47
2.41
2.54
2.53
2.44
2.77
2.65
2.56
3.06
3.07
2.94
3.31
Specialty Tapered
Products
E-Family Roller
Bearings
IP End Cover
Bearing Reference
Guide
DIMENSIONS
ISN End Cap
A
E-Family Roller
Bearings
Specialty Tapered
Products
PILLOW BLOCK
S-2000
UNISPHERE II
Shaft
Size
(mm)
30
35
40
45
50
55
60
65
70
75
80
85
90
100
110
115
125
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B14-2
End Cover
P/N
Description
A Dimension
069960
069960
069961
069962
069962
069963
069964
069965
069965
069965
069966
069966
069967
069967
069968
069969
069969
IPEC08
IPEC08
IPEC09
IPEC10
IPEC10
IPEC11
IPEC13
IPEC15
IPEC15
IPEC15
S2IPEC18
S2IPEC18
S2IPEC20
S2IPEC20
S2IPEC22
S2IPEC26
S2IPEC26
49.5
49.5
55
58.3
58.3
61.7
66.3
70
70
70
78.3
78.3
91.2
91.2
97.7
111.4
111.4
SPECIFICATIONS
PAGE B14-5
PAGE B14-8
B14-110
SELECTION
PAGE B14-14
Features / Benefits

DODGE UNIFIED SAF and SDAF Pillow Blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-3
DODGE UNIFIED SAF with SPLIT-SPHER Bearing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-5
SAFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-6
SAF-XT Spherical Roller Bearings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-6
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-7
How To Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-7
Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-8
Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-13
Bearing Reference
Guide
UNIFIED SAF
E-Family Roller
Bearings
CONTENTS
USAF 500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-26

USAF SMART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-54
SAF-XT and SAFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-56
SPLIT-SPHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-72
USDAF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-82

USAF 600. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-94
USAF 200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-100
USAF 300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-112
USAF Stabilizing Ring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-125
USAF Housing Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-126
USAF Housing vs Seal Group Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-130
DODGE Cool Lube 2 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B15-131
Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1
S-2000
Specialty Tapered
Products
Selection/Dimensions
UNIFIED SAF
IMPERIAL
UNISPHERE II
Key Word Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEYWORD-1
B15-1
Bearing Reference
Guide
CONTENTS
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
B15-2
DODGE UNIFIED SAF and SDAF Pillow Blocks

BEARINGS
E-Family Roller
Bearings
Spherical Roller Bearing - 22200, 22300, 23000, 23100

and 23200, tapered bore for adapter mount and straight
bore for direct mount.
Bearing Reference
Guide
FEATURES/BENEFITS
SPLIT-SPHER Bearing
Complete split replacement for an adapter mounted
22200. Compatible with UNIFIED SAF. Available in inch
bores.
Specialty Tapered
Products
SHAFT SIZES
Available for shaft sizes 1-7/16 - 15-3/4 and 40 mm-140
mm in adapter mount. Additional sizes offered in direct
mount. Pillow blocks are available in 200, 300, 500 and
600 series.
VIRTUALLY EVERY FEATURE YOU EVER

WANTED IN YOUR PILLOW BLOCK
Cast-in dimples locate drill holes for lube fittings, vents,
sensors and mounting modifications.
PLUS YOU GET BUILT-IN DESIGN

ADVANCEMENTS
With DODGE UNIFIED SAF and SDAF pillow blocks, you
benefit from a housing that has capabilities for harsh envi
ronments that competitive pillow blocks do not have.
Housing base is threaded to accept four Grade 5 cap

bolts for added strength. Cap bolts match base bolts
for one-wrench installation.
Standard housings have two oversized drains
adaptable to circulating oil systems.
NOTE: Instruction manuals for all Dodge bearings are available on www.dodge-pt.com
B15-3
UNIFIED SAF
IMPERIAL
Pry slots allow easy separation of the pillow block.
UNISPHERE II
UNIFIED SAF and SDAF pillow blocks match standard

SAF and SDAF inch dimensions.
S-2000
DIMENSIONS
Bearing Reference
Guide
FEATURES/BENEFITS
DODGE UNIFIED SAF and SDAF Pillow Blocks
E-Family Roller
Bearings
Cast iron, closed-end housings offer greater protection

in high pressure washdown environments. Available from
stock.
Standard modifications for wet and harsh environments

include nylon coating, epoxy paints and nickel plating, as
well as stainless steel hardware.
Specialty Tapered
Products
Solid cast iron feet increase strength in both two and fourbolt styles.
S-2000
New drop-in TRIPLE-TECT Seal makes seal installation

easier
UNISPHERE II
Large capacity oil sump lowers operating temperatures,

undercut bearing seat allows full lateral travel of
expansion bearing, prevents stabilizer ring from binding,
makes installation easy.
Exclusive oil-equalization passage simplifies

maintenance. Pillow block can be drained completely
from either side.
IMPERIAL
UNIFIED SAF
Oil return slots are cast into the interior seal grooves to
keep lubricants in. This allows oil in the seal grooves to
return to the oil sump instead of leaking.
Offset dowels with matched numbers on cap and base

joint simplify correct assembly.
B15-4
bearing installation puts equipment back into operation

faster and keeps production moving.
To replace a standard spherical roller bearing with a

SPLIT-SPHER insert, remove the cap, elevate the shaft
enough to support the load and burn off the failed
bearing and adapter with a torch.
HERES WHY!
DODGE offers a split-race spherical bearing that fits SAF
housings and replaces bearing and adapter assemblies.
Its a real cost-saver in every case where the shaft must
be stripped of components to permit sliding the new
bearing onto its proper shaft location.
The DODGE SPLIT-SPHER replacement lower halves

can then be slipped under the shaft, along with the split
seals. Bolt the upper halves in place, lower the shaft and
replace the cap. Theres no need to remove any other
shaft-mounted components or move motors and other
bulky machinery.
DIMENSIONS ARE STANDARD.

The DODGE SPLIT-SPHER bearing has the same
O.D. dimensions as a standard spherical bearing. This
means you can use a SPLIT-SPHER pillow block on the
inaccessible end of a shaft and a standard pillow block
on the accessible end. DODGE offers the only split-race
bearings made to standard SAF pillow block dimensions.
S-2000
Also, if needed, the backing dimension of the SPLITSPHER block can be increased by shimming to meet the
requirements of any roller bearing it replaces.
IMPERIAL
3. Place upper half of roller

assembly in position and
bolt on upper half of outer
ring. Lower shaft and replace
housing cap.
UNIFIED SAF
2. Bolt upper half of inner ring

to lower half
UNISPHERE II
The SPLIT-SPHER insert is easy to install!
1. Slightly elevate shaft, cut off

old bearing and slip lower
halves of SPLIT-SPHER
rings and roller assembly
beneath shaft
Bearing Reference
Guide
SPLIT-SPHER BEARINGS FROM DODGE INCREASE PRODUCTION AND REDUCE

DOWNTIME
REDUCE REPLACEMENT TIME UP TO 50%.
The SPLIT-SPHER bearing is quick to install. Simplified
E-Family Roller
Bearings
DODGE UNIFIED SAF with SPLIT-SPHER Bearing
Specialty Tapered
Products
FEATURES/BENEFITS
B15-5
Bearing Reference
Guide
FEATURES/BENEFITS
SAF-XT Spherical Roller Bearings
E-Family Roller
Bearings
The SAF-XT Pillow Block Housing is designed for typical

SAF dimensional interchangeability, complete with such
desirable features as 4-bolt caps, cap removal pry slots,
elongated bolt holes, and dimpled feet for doweling.
In addition to these features the SAF-XT housing also
incorporates a better grease purging/sealing system for
extra protection of the bearing in a hostile environment.
Specialty Tapered
Products
The SAF-XT pillow block has only one grease fitting.

Bearings with costly, comparably effective auxiliary seals
have up to three grease fittings. The single fitting speeds
up lubrication, reduces chance for voids. Complete fill,
bearing action, and configuration of reservoir assure
maximum purging effectiveness. Grease relief channels
result in self-centering positive contact seal. These factors
make SAF-XT blocks easy to lubricate.
S-2000
SAFS
UNISPHERE II
IMPERIAL
UNIFIED SAF
DODGE SAFS cast steel pillow blocks mount 22200K

series spherical roller bearings on 2-7/16 - 8 shafts.
bearing and seals may also be installed in SAFS hous

ings. See page B15-76 through B15-81 .)
These pillow blocks are well suited for applications

requiring either grease or oil lubrication where adapter
mounting is preferred and limited thrust loads are
experienced. Cast steel housings provide greater
resistance to impact and shock loading than the more
economical cast iron pillow blocks. (SPLIT-SPHER
SAFS pillow blocks are furnished complete with the

TRIPLE-TECT combination labyrinth and face rubbing
seals. LER triple ring seals are available as an alternate
seal for SAFS pillow blocks. Where required, purgeable
auxiliary seals and end closures are also available.
B15-6
DODGE recommends the use of stainless steel cap bolts

and grease fittings. To order, specify the type of finish
required and stainless bolts and fittings at the end of
the description. Order by description for special finishes.
SPECIAL DRILLING
The standard offering includes a W33 lube hole and
fitting, along with a cap vent hole. UNIFIED Bearings also
come standard with dual oversized drain holes in the
base. Additional holes may be drilled to meet customer
specifications for lube, vent and sensor locations. To
order, specify holes required from chart on page B15126 and add to the end of the description. Order by
description instead of part number. Minimum order
quantities will be required for this special drilling.
SPECIAL FINISHES
BEARINGS
Standard bearings offered are 22200 and 22300 series
metal caged, double row, spherical bearings with C3
fits in both direct and adapter mounts (shaft sizes larger
than 8 are standard with C0 fit). Other double row
spherical bearing series are available on request including
23000 and 23200 in both direct and adapter mount. Self
aligning ball bearing series 1200, 1300 and 2200 in both
adapter and direct mount are available on request. To
order, specify bearing series or fit at the end of the
description.
Department for Bearings at 864-284-5700 during the
hours of 8:00 a.m. and 5:00 p.m. Eastern time.
S-2000
A variety of finishes are available for extra corrosion

resistance. The standard finish is a water based U.S.D.A.
approved paint. When special finishes are specified,
Bearing Reference
Guide
Grade 30 cast iron is the standard housing material

except on SAFS housings. When steel housings are
required, the SAFS bearing line is recommended.
E-Family Roller
Bearings
Housing
Specialty Tapered
Products
SPECIFICATION
HOW TO ORDER
The standard material used in housings is ASTM A48

Class 30 Cast iron. Steel versions are also available
in the SAFS line on page B15-61 Housings may be
modified to suit customer requirements for mounting,
venting, lubricating or monitoring of the bearing. Housing
designs are available for performance in extreme harsh
environments through the use of cast closed ends, nylon
coating and stainless steel hardware.
How to Order Dodge UNIFIED Bearings
Locking devices, including tapered adapters and locking

washers and nuts, are available to accommodate both
commercial and precision machined shafting.
A wide variety of standard seals is available including

labyrinth and rubbing seals and combinations of the
two. DODGE TRIPLE-TECT and Drop-in TRIPLE-TECT
seals are recommended for general purpose applications
FEATURES/BENEFITS
PAGE B15-3

of the product offering have part numbers, with listings
insures accurate order processing.
When part numbers are not shown, the product may
be specified by description. This method is used when
ordering units that include modifications/options. To order
by description, use the nomenclature key shown on page
B15-8 and add any special instructions to the end of the
SELECTION
PAGE B15-13
PAGE B15-7
B15-7
PABE B15-26
IMPERIAL
because of their superior combination sealing action.

More information on seals is shown on page B15-19.
UNIFIED SAF
DODGE UNIFIED Spherical Bearings are housed and

sealed general purpose, high capacity double row
spherical roller bearings. Bearings may be mounted on
shafts with adapters, or they may be mounted directly,
using interference fits.
UNISPHERE II
Inch
Bearing Reference
Guide
NOMENCLATURE
Complete Pillow Block - Inch
P2B - 515 - USAF - 207 - TT
E-Family Roller
Bearings
HOUSING
STYLE
P2B -
2 Bolt Base Pillow

Block, Cast Iron, Both
Ends Open
P4B -
4 Bolt Base Pillow

Block, Cast Iron, Both
Ends Open
Specialty Tapered
Products
CP2B - 2 Bolt Base Pillow

Block, Cast Iron, One
End Closed
CP4B - 4 Bolt Base Pillow
Block, Cast Iron, One
End Closed
BEARING SERIES
AND HOUSING SIZE
2XX - For Direct Mount 22200
Series Bearing
3XX - For Direct Mount 22300
Series Bearing
5XX - For Adapter Mounted
22200K Series Bearing
TYPE OF
MOUNTED BEARING
USAF -
UNIFIED SAF
Pillow Block
(Inch Dimensions)
USDAF - UNIFIED SDAF

Pillow Block
SS -
SPLIT-SPHER
Pillow Block

SIZE INCHES
S-2000
UNISPHERE II
IMPERIAL
207
2=
07 =
107 =
111 =
115 =
203 =
207 =
208 =
211 =
212 =
215 =
300 =
303 =
307 =
308 =
315 =
400 =
403 =
407 =
408 =
415 =
500 =
503 =
507 =
508 =
515 =
600 =
607 =
608 =
615 =
700 =
703 =
708 =
715 =
800 =
807 =
808 =
815 =
900 =
907 =
908 =
915 =
1000 =
1007 =
1008 =
- Inches & 16ths

2
7/16
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4
4-3/16
4-7/16
4-1/2
4-15/16
5
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
7-3/16
7-1/2
7-15/16
8
8-7/16
8-1/2
8-15/16
9
9-7/16
9-1/2
9-15/16
10
10-7/16
10-1/2
SEAL
TYPE
TT LER SS TTDN AUX EC -
TRIPLE-TECT
Metal Labyrinth
Split Non-Metallic
Labyrinth
Drop-In TRIPLE-TECT
Auxiliary (Taconite)
End Closure
For monitor equipped pillow blocks a C preceding the pillow block designation indicates closed ends
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
SELECTION
PAGE B15-13
SPECIFICATION
PAGE B15-7
B15-8
PAGE B15-26
Bearing Reference
Guide
Housing Only (Housing and Stab Ring) Inch

H4S - 515 - USAF
HOUSING
STYLE
HOUSING TYPE
AND SIZE
TYPE OF MOUNTED
BEARING HOUSING
2 Bolt Base Pillow Block,

Cast Iron, Both Ends Open
2XX -
For Direct Mount

22200 Series Bearing
USAF -
UNIFIED SAF Cast Iron Pillow Block Housing (Inch

Dimensions)
H4S -

Cast Iron, Both Ends Open
3XX -
For Direct Mount

USDAF - UNIFIED SDAF Cast Iron Pillow Block Housing

(Inch Dimensions)
CH2S -

Cast Iron, One End Closed
5XX -
For Adapter Mounted

6XX -
For Adapter Mounted

0XX -
For Adapter Mounted

31XX -
For Adapter Mounted

32XX -
For Adapter Mounted

FEATURES/BENEFITS
PAGE B15-3
SELECTION
PAGE B15-13
SPECIFICATION
PAGE B15-7
B15-9
PAGE B15-26
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
Specialty Tapered
Products
H2S -
E-Family Roller
Bearings
NOMENCLATURE
Bearing Reference
Guide
NOMENCLATURE
Housing Assembly (Housing and Stab Ring and Seals) - Inch
FSAF - 518
E-Family Roller
Bearings
HOUSING
STYLE
SAF -
2 Bolt pillow block

housing (4 bolt when no
2 bolt offered)
Specialty Tapered
Products
FSAF - 4 bolt pillow block

housing when 2 bolt
offered
SDAF - 4 Bolt pillow block
housing
HOUSING TYPE
AND SIZE
2XX -
For Direct Mount

3XX -
For Direct Mount

5XX -
For Adapter Mounted

6XX -
For Adapter Mounted

0XX -
For Adapter Mounted

3-15/16
TTDN
SHAFT
SIZE
INCHES
CLSD
SEAL
TYPE
TT TRIPLE-TECT
LER - Metal Labyrinth
TTDN - Drop-In
TRIPLE-TECT
OTHER
Blank - Both Ends Open

CLSD - Cast Closed One End

S-2000
Bearing
BRG
UNISPHERE II
BEARING
BRG - Roller Bearing
22215K
C3AH
BEARING SERIES
Spherical
Solid Ring Type
222 = 22200 Series
223 = 22300 Series
230 = 23000 Series
231 = 23100 Series
232 = 23200 Series
OTHER DATA
C3 = Bearing clearance
AH = Air Handling
reference
IMPERIAL
SS Denotes
Spherical
Split Ring Type
K-
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
Tapered Adapter Sleeve

Mounting. Otherwise Bearing
Has Cylindrical Bore for Direct
Mounting.
SELECTION
PAGE B15-13
SPECIFICATION
PAGE B15-7
B15-10
PAGE B15-26
Bearing Reference
Guide
NOMENCLATURE
Seals - Inch
FEATURES/BENEFITS
PAGE B15-3
Seal Group
Number &Shaft Size
50-315
50-400
52-403
54-407
54-408
54-409
56-414
56-415
56-500
58-503
58-505
60-507
60-508
62-512
62-514
64-515
64-600
64-601
66-604
68-607
68-608
70-610
72-614
72-615
72-700
74-703
74-704
76-707
76-708
76-710
78-713
Fits Housing
Sizes
522 & 622
522 & 622
222, 322, 524 & 624
526 & 626
220, 320, 526 & 626
224 & 324
222 & 322
226, 326, 528 & 628
528 & 628
530 & 630
224, 324, 228 & 328
532 & 632
532 & 632
230 & 330
226 & 236
534 & 634
534 & 634
232 & 332
228 & 328
234, 334 & 536
536
230 & 330
236
538 & 638
232, 332, 538 & 638
540
238 & 338
234 & 334
544S
240
236
SELECTION
PAGE B15-13
SPECIFICATION
PAGE B15-7
B15-11
E-Family Roller
Bearings
Inches and 16ths

2 = 2 and 07 =7/16
or 207 = 2-7/16
Seal Group
Number &Shaft Size
78-715
78-800
80-805
80-806
82-812
84-907
84-908
84-909
90-807
90-808
90-815
90-900
92-915
92-1000
94-1007
94-1008
96-1015
96-1100
98-1107
98-1108
100-1115
100-1200
102-1207
104-1215
104-1300
106-1307
106-1308
108-1315
108-1400
110-1500
112-1512
Fits Housing
Sizes
544
544
244
238 & 338
240
052
052
244
048
048
048
048
056
056
056L
056L
060, 3160, 3260
060, 3160, 3260
064
064
064L, 3164, 3264
064L, 3164, 3264
068, 168, 268
072
072
072L, 3172
072L, 3172
076, 3176
076, 3176
80
84
PAGE B15-26
Specialty Tapered
Products
Fits Housing
Sizes
308, 509 & 609
309, 510 & 610
310
308, 511 & 611
311
309
513 & 613
312
310
515 & 615
515 & 615
313
311
314
516 & 616
516 & 616
215 & 315
312
517 & 617
216, 316, 517 & 617
313
217 & 317
314
518
218
215 & 315
216 & 316
217 & 317
218
520 & 620
520 & 620
220 & 320
TT TRIPLE-TECT
TTDN - TRIPLE-TECT with
Drop-In Feature
LER - Metallic Labyrinth Seal
AUX - Auxiliary
(Taconite) Seal
SS Split Seal
(Non-Metallic LER)
SEAL BORE
SIZE
S-2000
Seal Group
Number &Shaft Size
08-107
10-111
12-114
12-115
14-201
14-202
14-203
14-204
18-206
20-207
20-208
22-207
22-209
22-210
24-211
24-212
24-213
26-214
28-215
28-300
28-301
32-303
32-304
34-303
36-306
38-307
38-310
42-315
44-402
46-307
46-308
50-313
TYPE OF
SEAL
UNISPHERE II
Seals of the Same Group

Number All Fit the Same
Housings.
207
IMPERIAL
SEAL GROUP
NUMBER
TT
UNIFIED SAF
28
Bearing Reference
Guide
NOMENCLATURE
Adapter Assemblies - Inch
SNW
15
ADAPTER ASSEMBLY
TYPE
E-Family Roller
Bearings
SNW =
SNP =
Specialty Tapered
Products
S-2000
H31
H23
UNISPHERE II
H32
Adapter Series
for 22200K Series
Bearings thru 4
Bore Size
Adapter Series
for 22200K & 23100K
Series Bearings
Greater Than 4
Adapter Series
for 22300K Series
Bearings
Adapter Series
for 23200K Series Bearings
ADAPTER BORE
SIZE
Up to 8 shaft size last two digits

of bearing numerical description.
For larger sizes last four digits.
H3
H3
207
BEARING
SIZE
Sleeve, Nut and Washer

Assembly thru 44 (8 inch) Size
Sleeve, Nut and Lockplate
Assembly 048
(8-7/16) and Larger Sizes
ADAPTER ASSEMBLY
TYPE
15
SNW
BEARING SIZE
Last two digits of bearing

numerical description.
Inches and 16ths

2 = 2 and 07 =7/16 or
207 = 2-7/16
See size listing page
B15-10
207
SNW
SNW =
SNP =
Sleeve, Nut and Washer

Assembly thru 544 (8)
Size
Sleeve Nut and Plate
Assembly from
048 thru 084,
3156 thru 3176, &
3252 thru 3268
ADAPTER BORE
SIZE
Inches and 16ths
2 = 2 and 07 =7/16
or 207 = 2-7/16
See size listing page
B15-10
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
SELECTION
PAGE B15-13
SPECIFICATION
PAGE B15-7
B15-12
PAGE B15-26
DODGE UNIFIED Spherical Roller Bearings have the capacity to

housing, shaft, shaft attachment, speed and life requirements as
listed in this catalog. DODGE UNIFIED Spherical Roller Bearings
have been applied successfully even when these limits have
been exceeded under controlled operating conditions. Contact
conditions.
10/3
C
16667
X
L10 Life, Hours =
P
RPM
NOTE: Spherical bearings require a radial load at least

equal to the thrust load for proper operation
(Fa/FR = 1). If the thrust load exceeds this limit,

consult Application Engineering.
SHAFT TOLERANCES
Shaft
Size
Up To 1-1/2
1-9/16 to 2-1/2
2-5/8 to 4
4-3/16 to 6
6-7/16 and above
Where: C = Dynamic Capacity

(Table1, page B15-15 for USAF) lbs.
* Use the smaller of this value or the adaptor maximum

allowable thrust load list in Table 1.
GENERAL
RECOMMENDED
THRUST LOAD
20-200
201-2000
Over 2000
C/20
C/40
C/60

FR = P for Pure Radial Load Conditions
P = Equivalent radial load, lbs
The DODGE program BEST can be used to find
application loads.
3. Establish RPM.

adaptor mounted bearings. Since the allowable load, especially
at a low speed, is very large, the shaft should be checked to
assure adequate shaft strength.
Using the easy selection Table2, pageB15-16 , under the RPM

column, find the equivalent radial load that equals or is higher
for your application.If the desired life is different than the values
The DODGE Bearing Evaluation and Selection Technique (BEST) is a menu driven computer program that calculates bearing
loads, fatigue life and operating temperature for a two bearing shaft system based on user supplied input parameters. This
interactive program is available at www.ptwizard.com under the Product Section area.
FEATURES/BENEFITS
PAGE B15-3
UNISPHERE II

as a guide for general applications that will give adequate
L10 life. Where substantial radial loads are also present, it is
advisable to calculate actual L10 life to assure that it meets the
requirements.
RPM
Bearing Reference
Guide
SELECTING BEARING SUPPORTING RADIAL LOADS

ONLY
NOMENCLATURE
PAGE B15-8
SPECIFICATION/HOW TO ORDER
PAGE B15-7
B15-13
PAGE B15-26
IMPERIAL
Shaft Tolerance,
Inches
+.000 -.002
+.000 -.003
+.000 -.004
+.000 -.005
+.000 -.006
UNIFIED SAF
( ) (
through the base. Where uplift loads are involved, see B1524 and for maximum values. Where a load pulls the housing
away from the mounting base, both the hold-down bolts and
housing must be of adequate strength. Auxiliary load carrying
devices such as shear bars are advisable for side or end loading
of plummer blocks.
E-Family Roller
Bearings
(USAF 500, 600, 200, 300 SERIES

AND USDAF 23000, 23100, 23200)
Specialty Tapered
Products
UNIFIED Pillow Block - Spherical Roller Bearings
S-2000
SELECTION
Bearing Reference
Guide
SELECTION
SELECTING BEARINGS SUPPORTING
COMBINATION RADIAL AND THRUST LOADS

3. RPM = 1,000
E-Family Roller
Bearings
Specialty Tapered
Products
At the intersection of the 950 RPM column and the 30,000 hours
L10 life row, the equivalent radial load of 4555 lbs. exceeds the
4000 lbs. application radial load for shaft size 1-7/16 adapter
mount (22309K series bearing) and for shaft size 45 mm direct
mount (22309 series bearing). Also, the equivalent radial load of
4877 lbs. exceeds the 4000 lbs. application radial load for shaft
size 2-3/16 adapter mount (22213K series bearing) and for
shaft size 65mm direct mount (22213 series bearing). Therefore,
the follow bearings can be used to meet the application
conditions of the above example:
1. 1-7/16 adapter mount
2. 45 mm direct mount
22309K bearing
22309 bearing
22213K bearing
22213 bearing
S-2000

SELECTION CHART.
C=
0.3
UNISPHERE II
16667
XP

= Radial load, lbs.

LOADS
IMPERIAL
the dynamic capacity column on Table 1, page B15-15 the C
value equal to or greater than the C value just calculated. The
bore size on the far left represents the minimum shaft size
the MAX. RPM on Table1, page B15-15. Also check that the
radial load does not exceed the Maximum Allowable Slip Fit
Radial Load shown on Table 1. When selecting an L10 life of less
than 30,000 hours, particular attention must be paid to shaft
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3

Where:
Calculate FA/FR and compare to e for the selected bore size.

Determine X and Y from Table 1 depending on whether FA/FR
is equal to or less than e, or FA/FR is greater than e. Substitute
all known values into the equivalent radial load equation.
determine L10 life in hours, or it can be compared to the
life desired in the easy selection.

L10 X RPM
Equation 1
P
FR
FA
e
X
Y
OR
3. 2-3/16 adapter mount
4. 65 mm direct mount

and Y (thrust factor) from Table1, page B15-15 converts the
of this magnitude.
Spherical Roller Bearings generally are not recommended for

pure thrust load applications. They will perform satisfactorily
under very light pure thrust loads. Consult DODGE Application
Engineering (864-284-5700) during the hours of 8:00 a.m. and
5:00 p.m. Eastern Time.
AXIAL EXPANSION CAPABILITY

Axial expansion capability for UNIFIED SAF 500, 600, 200 and
300 pillow blocks is shown on B15-25. DODGE supplies all
UNIFIED pillow block housings with the appropriate stabilizing
ring. When the stabilizing ring is used, the pillow block becomes
a non-expansion pillow block. Not using the stabilizing ring
allows shaft and bearing axial expansion. Proper mounting of
the stabilizing ring is shown on housing dimension pages.
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-14
PAGE B15-26
Direct
Mount
mm
Bearing
Series
40
--45
--50
--55
60
--65
70
22308
22209
22309
22210
22310
22211
22311
22312
22213
22313
22314
22215
22315
22216
22316
22217
22317
22218
22220
22320
22222
22322
22224
22324
22226
22326
22228
22328
22230
22330
22232
22332
22234
22334
22236
22336
22238
22338
22240
.36
.26
.36
.24
.36
.23
.36
.35
.24
.34
.34
.22
.34
.22
.34
.22
.33
.23
.24
.34
.25
.33
.25
.33
.26
.33
.25
.34
.25
.33
.26
.37
.26
.37
.25
.37
.28
.37
.29
1
1.9
0.67
2.8
1
2.6
0.67
3.9
1-7/16
1
1.9
0.67
2.8
1
2.8
0.67
4.2
1-11/16
1
1.9
0.67
2.8
1
2.9
0.67
4.4
1-15/16
1
1.9
0.67
2.8
1
1.9
0.67
3
1
2.8
0.67
4.2
2-3/16
1
2
0.67
3
1
2
0.67
3
2-7/16
1
3.1
0.67
4.6
75
2-1/2
1
2
0.67
3
2-11/16
1
3.1
0.67
4.7
80
2-3/4
1
2
0.67
3
2-15/16
1
3.1
0.67
4.5
85
3
1
2
0.67
3
3-3/16
90
1
2.9
0.67
4.3
3-7/16
1
2.8
0.67
4.2
100
3-1/2
1
2
0.67
3
3-15/16
1
2.7
0.67
4
110
4
1
2.1
0.67
3.1
1
2.7
0.67
4
4-3/16
120
1
2.1
0.67
3.1
4-7/16
1
2.6
0.67
3.9
130
4-1/2
1
2.1
0.67
3.1
4-15/16
1
2.7
0.67
4
140
5
1
2
0.67
3
1
2.7
0.67
4
5-3/16
150
1
2
0.67
3
5-7/16
1
2.6
0.67
3.9
160
5-1/2
1
1.8
0.67
2.7
5-15/16
1
2.6
0.67
3.9
170
6
1
1.8
0.67
2.7
6-7/16
1
2.7
0.67
4
180
6-1/2
1
1.8
0.67
2.7
6-15/16
1
2.4
0.67
3.6
190
7
1
1.8
0.67
2.7
7-3/16
200
1
2.3
0.67
3.5
7-1/2
1
7-15/16
220
22244
.29
1
2.3
0.67
3.5
8
1
8-7/16
1
8-1/2
23048
.25
1
2.7
0.67
4.1
8-15/16, 9
1
9-7/16
1
23052
.26
2.6
0.67
3.9
9-1/2
1
9-15/16,10
1
10-7/16
23056
.25
1
2.7
0.67
4.1
10-1/2
1
If the thrust load exceeds adapter maximum allowable thrust load, auxiliary methods of carrying thrust are required.
FEATURES/BENEFITS
PAGE B15-3
Dynamic
Capacity
(C)
Pounds
Static
Capacity
(Co)
Lbs.
35,500
24,500
42,500
26,000
51,000
31,500
60,000
69,500
45,500
78,000
86,500
48,000
100,000
56,000
112,000
68,000
122,000
78,000
96,500
183,000
122,000
212,000
143,000
240,000
170,000
280,000
196,000
325,000
228,000
365,000
260,000
325,000
309,000
360,000
305,000
405,000
270,000
415,000
300,000
33,500
23,600
41,500
26,500
50,000
32,500
58,500
69,500
47,500
81,500
86,500
53,000
102,000
60,000
114,000
73,500
125,000
85,000
106,000
208,000
134,000
240,000
166,000
265,000
200,000
310,000
236,000
365,000
275,000
415,000
315,000
365,000
355,000
475,000
16020
Grease
Oil
415,000
570,000
450,000
4300
5600
3800
5300
3400
4500
3200
2800
3800
2600
2400
3400
2200
3200
2200
3000
2000
2600
2200
1700
2000
1500
1900
1400
1800
1300
1700
1200
1600
1100
1500
1000
1300
950
1300
900
1200
850
1100
5300
7000
4800
6700
4300
5600
4000
3600
4500
3400
3200
4300
3000
4000
3000
3800
2800
3400
3000
2200
2800
1900
2400
1800
2200
1700
2200
1600
2000
1500
1800
1400
1700
1300
1600
1100
1300
1100
1200
365,000
550,000
950
1000
14887
260,000
490,000
950
1000
18232
340,000
630,000
900
950
20000
345,000
670,000
850
900
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-15
Maximum RPM
375,000
PAGE B15-26
Bearing Reference
Guide
Adapter
Maximum
Allowable
Thrust
Load
Pound
698
1092
775
1348
927
1672
1359
2104
1568
2782
1780
3128
2063
3438
2429
3102
4920
3931
5934
4693
6959
5610
8152
6419
9628
7383
10923
8630
12298
9858
13755
10437
15291
11786
16910
13215
E-Family Roller
Bearings
Adapter
Mounted
Inches
FA/FR>e
Specialty Tapered
Products
FA/FR e
S-2000
Shaft Size
UNISPHERE II
Table 1: Radial & Thrust Factors For USAF Spherical Bearings
IMPERIAL
UNIFIED SAF
SELECTION
Bearing Reference
Guide
SELECTION
Table 2: Selection Table for UNIFIED SAF Pillow Blocks
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
Shaft Size
L10
Adapter Direct Bearing Life
Mount Mount Series Hours
50
100
(Inches) (mm)
10,000 12,797 10,394
40
22308 30,000 9,204 7,476
60,000 7,476 6,072
10,000 8,831 7,173
22209 30,000 6,352 5,159
60,000 5,159 4,191
1 -7/16
10,000 15,320 12,444
45
22309 30,000 11,018 8,950
60,000 8,950 7,269
10,000 9,372 7,613
22210 30,000 6,741 5,475
60,000 5,475 4,447
1-11/16
10,000 18,384 14,932
50
22310 30,000 13,222 10,740
60,000 10,740 8,723
10,000 11,355 9,223
22211 30,000 8,167 6,633
60,000 6,633 5,388
1-15/16
10,000 21,628 17,567
55
22311 30,000 15,555 12,635
60,000 12,635 10,263
10,000 25,052 20,349
60
22312 30,000 18,018 14,635
60,000 14,635 11,888
10,000 16,401 13,322
22213 30,000 11,796 9,581
60,000 9,581 7,783
2 -3/16
10,000 28,116 22,838
65
22313 30,000 20,222 16,425
60,000 16,425 13,342
10,000 31,180 25,326
70
22314 30,000 22,426 18,215
60,000 18,215 14,795
10,000 17,302 14,054
75
22215 30,000 12,444 10,108
60,000 10,108 8,210
2-7/16
2-1/2
10,000 36,047 29,279
75
22315 30,000 25,926 21,058
60,000 21,058 17,105
10,000 20,186 16,396
80
22216 30,000 14,518 11,793
60,000 11,793 9,579
2- 11/16
2-3/4
10,000 40,372 32,793
80
22316 30,000 29,037 23,585
60,000 23,585 19,157
Note:
Dark Shaded Areas Require Circulating Oil
Light Shaded Areas Require Static Oil
FEATURES/BENEFITS
PAGE B15-3
Allowable Equivalent Radial Load Rating (Lbs.) at Various Revolutions Per Minute
250
500
750
950
7,896
5,679
4,613
5,449
3,919
3,183
9,453
6,799
5,522
5,783
4,159
3,378
11,343
8,158
6,627
7,006
5,039
4,093
13,345
9,598
7,796
15,458
11,118
9,031
10,120
7,279
5,912
17,349
12,478
10,135
19,239
13,837
11,239
10,676
7,679
6,237
22,242
15,997
12,994
12,456
8,958
7,276
24,911
17,917
14,553
6,413
4,613
3,747
4,426
3,183
2,586
7,678
5,522
4,485
4,697
3,378
2,744
9,214
6,627
5,383
5,691
4,093
3,325
10,840
7,796
6,332
12,556
9,031
7,335
8,220
5,912
4,802
14,092
10,135
8,232
15,627
11,239
9,129
8,672
6,237
5,066
18,066
12,994
10,554
10,117
7,276
5,910
20,234
14,553
11,821
5,679
4,084
3,318
3,919
2,819
2,290
6,799
4,890
3,972
4,159
2,991
2,430
8,158
5,868
4,766
5,039
3,624
2,944
9,598
6,903
5,607
11,118
7,996
6,495
7,279
5,235
4,252
12,478
8,974
7,289
13,837
9,952
8,084
7,679
5,523
4,486
15,997
11,505
9,345
8,958
6,443
5,233
17,917
12,886
10,467
5,290
3,805
3,090
3,651
2,626
2,133
6,333
4,555
3,700
3,874
2,787
2,263
7,600
5,466
4,440
4,694
3,376
2,742
8,941
6,431
5,223
10,357
7,449
6,050
6,780
4,877
3,961
11,623
8,360
6,790
12,890
9,271
7,530
7,153
5,145
4,179
14,902
10,718
8,706
8,345
6,002
4,875
16,690
12,004
9,750
1,300 1,500 1,800 2,000 2,600 3,000 3,200 3,400
4500
4,815
3,463
2,813
3,323
2,390
1,941
5,765
4,146
3,368
3,527
2,536
2,060
6,917
4,975
4,041
4,273
3,073
2,496
8,138
5,853
4,754
9,427
6,780
5,507
6,171
4,439
3,605
10,580
7,609
6,180
11,732
8,438
6,854
6,511
4,683
3,803
13,564
9,755
7,924
7,596
5,463
4,437
15,191
10,926
8,875
3,318
2,386
1,938
2,290
1,647
1,338
3,972
2,857
2,320
2,430
1,748
1,419
4,613
3,318
2,695
3,183
2,290
1,860
5,522
3,972
3,226
3,378
2,430
1,974
6,627
4,766
3,871
4,093
2,944
2,391
7,796
5,607
4,554
9,031
6,495
5,276
5,912
4,252
3,454
10,135
7,289
5,921
11,239
8,084
6,566
6,237
4,486
3,644
12,994
9,345
7,591
7,276
5,233
4,251
14,553
10,467
8,502
4,367
3,141
2,551
3,014
2,168
1,761
5,228
3,760
3,054
3,199
2,300
1,869
6,274
4,512
3,665
3,875
2,787
2,264
7,381
5,309
4,312
8,550
6,149
4,995
5,597
4,026
3,270
9,596
6,901
5,606
10,641
7,653
6,217
5,905
4,247
3,450
12,302
8,848
7,187
6,889
4,955
4,025
13,778
9,910
8,049
4,231
3,043
2,472
2,920
2,100
1,706
5,066
3,643
2,959
3,099
2,229
1,810
6,079
4,372
3,551
3,755
2,700
2,193
7,152
5,144
4,178
8,284
5,958
4,839
5,423
3,901
3,168
9,297
6,687
5,431
10,310
7,415
6,023
5,721
4,115
3,342
11,919
8,573
6,963
6,675
4,801
3,899
13,350
9,601
7,799
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-16
3,911
2,813
2,285
2,699
1,941
1,577
4,682
3,368
2,735
2,864
2,060
1,673
5,619
4,041
3,282
3,470
2,496
2,027
6,610
4,754
3,862
7,657
5,507
4,473
5,013
3,605
2,928
8,593
6,180
5,020
9,530
6,854
5,567
5,288
3,803
3,089
11,017
7,924
6,436
6,170
4,437
3,604
12,339
8,875
7,208
3,747
2,695
2,189
2,586
1,860
1,511
4,485
3,226
2,620
2,744
1,974
1,603
5,383
3,871
3,144
3,325
2,391
1,942
6,332
4,554
3,699
7,335
5,276
4,285
4,802
3,454
2,805
8,232
5,921
4,809
9,129
6,566
5,333
5,066
3,644
2,959
10,554
7,591
6,166
5,910
4,251
3,453
11,821
8,502
6,905
3,675
2,643
2,147
2,536
1,824
1,482
4,399
3,164
2,570
2,691
1,936
1,572
5,279
3,797
3,084
3,261
2,345
1,905
6,211
4,467
3,628
7,194
5,174
4,203
4,710
3,388
2,752
8,074
5,807
4,717
8,954
6,440
5,231
4,969
3,574
2,903
3,609
2,595
2,108
2,490
1,791
1,455
4,320
3,107
2,524
2,643
1,901
1,544
5,184
3,729
3,029
3,202
2,303
1,871
6,099
4,387
3,563
7,065
5,081
4,127
4,625
3,327
2,702
7,929
5,703
4,632
5,797
4,169
3,387
5,692
4,094
3,325
2,944
2,117
1,720
4,252
3,058
2,484
4,879
3,509
2,850
PAGE B15-26
5,600
2,144
1,542
1,253
2,275
1,637
1,329
2,757
1,983
1,611
Bearing Reference
Guide
SELECTION
FEATURES/BENEFITS
PAGE B15-3
12,285
8,836
7,177
22,041
15,852
12,876
14,092
10,135
8,232
17,434
12,539
10,185
33,061
23,778
19,314
22,041
15,852
12,876
38,300
27,546
22,375
25,835
18,581
15,092
43,359
31,185
25,330
30,712
22,089
17,942
50,585
36,382
29,551
35,410
25,467
20,686
58,715
42,229
34,301
41,191
29,625
24,063
65,942
47,427
38,522
10,878
7,824
6,355
19,516
14,037
11,401
12,478
8,974
7,289
15,437
11,103
9,018
29,275
21,055
17,102
19,516
14,037
11,401
33,914
24,391
19,812
22,876
16,453
13,364
38,393
27,613
22,429
27,195
19,559
15,887
44,792
32,215
26,167
31,354
22,551
18,317
51,990
37,393
30,372
36,473
26,232
21,307
58,389
41,995
34,110
10,133
7,288
5,920
18,180
13,076
10,621
11,623
8,360
6,790
14,380
10,343
8,401
27,270
19,613
15,931
18,180
13,076
10,621
31,592
22,722
18,456
21,310
15,326
12,449
35,764
25,723
20,893
25,333
18,220
14,799
41,725
30,010
24,375
29,208
21,007
17,063
48,431
34,833
28,293
33,976
24,436
19,849
54,392
39,120
31,775
9,223
6,634
5,388
16,548
11,901
9,667
10,580
7,609
6,180
13,089
9,414
7,646
24,821
17,852
14,500
16,548
11,901
9,667
28,755
20,681
16,798
19,396
13,950
11,331
32,553
23,413
19,017
23,058
16,584
13,470
37,978
27,315
22,186
26,585
19,120
15,530
44,082
31,705
25,752
30,925
22,242
18,066
49,507
35,607
28,922
8,836
6,355
5,162
15,852
11,401
9,261
10,135
7,289
5,921
12,539
9,018
7,325
23,778
17,102
13,891
15,852
11,401
9,261
27,546
19,812
16,092
18,581
13,364
10,855
31,185
22,429
18,218
22,089
15,887
12,904
36,382
26,167
21,254
25,467
18,317
14,878
42,229
30,372
24,670
29,625
21,307
17,307
8,365
6,017
4,887
15,008
10,794
8,768
9,596
6,901
5,606
11,871
8,538
6,935
22,513
16,192
13,152
15,008
10,794
8,768
26,080
18,758
15,236
17,592
12,652
10,277
29,525
21,235
17,248
20,913
15,041
12,217
8,105
5,829
4,735
14,541
10,459
8,495
9,297
6,687
5,431
11,502
8,273
6,719
21,812
15,688
12,742
14,541
10,459
8,495
B15-17
7,177
5,162
4,193
7,039
5,063
4,112
6,912
4,971
4,038
8,232 8,074
5,921 5,807
4,809 4,717
10,185
7,325
5,950
7,929
5,703
4,632
5,600
13,441
9,667
7,852
17,045
12,259
9,957
20,263
14,573
11,837
24,112 23,362
17,342 16,802
14,086 13,648
28,049 27,176
20,173 19,545
16,386 15,876
NOMENCLATURE
PAGE B15-8
PAGE B15-7
7,492
5,388
4,377
13,441
9,667
7,852
8,593
6,180
5,020
10,631
7,646
6,211
4500
E-Family Roller
Bearings
15,125
10,878
8,836
27,135
19,516
15,852
17,349
12,478
10,135
21,464
15,437
12,539
40,703
29,275
23,778
27,135
19,516
15,852
47,153
33,914
27,546
31,806
22,876
18,581
53,381
38,393
31,185
37,812
27,195
22,089
62,278
44,792
36,382
43,594
31,354
25,467
72,287
51,990
42,229
50,712
36,473
29,625
81,184
58,389
47,427
1,300 1,500 1,800 2,000 2,600 3,000 3,200 3,400
Specialty Tapered
Products
950
S-2000
750
UNISPHERE II
500
IMPERIAL
250
PAGE B15-26
UNIFIED SAF
Shaft Size
L10
50
100
(Inches) (mm)
10,000 24,512 19,910
85
22217 30,000 17,629 14,320
60,000 14,320 11,631
2 -15/16
3
10,000 43,977 35,720
85
22317 30,000 31,629 25,691
60,000 25,691 20,868
10,000 28,116 22,838
3-3/16
90
22218 30,000 20,222 16,425
60,000 16,425 13,342
10,000 34,785 28,254
100
22220 30,000 25,018 20,321
60,000 20,321 16,506
3 -7/16
3-1/2
10,000 65,966 53,581
100
22320 30,000 47,444 38,536
60,000 38,536 31,301
10,000 43,977 35,720
110
22222 30,000 31,629 25,691
60,000 25,691 20,868
3 -15/16
4
10,000 76,419 62,072
110
22322 30,000 54,962 44,643
60,000 44,643 36,262
10,000 51,547 41,869
120
22224 30,000 37,074 30,113
60,000 30,113 24,460
4 -3/16
10,000 86,512 70,270
120
22324 30,000 62,222 50,540
60,000 50,540 41,051
10,000 61,279 49,774
130
22226 30,000 44,074 35,799
60,000 35,799 29,078
4 -7/16
4-1/2
10,000 100,931 81,981
130
22326 30,000 72,592 58,963
60,000 58,963 47,893
10,000 70,652 57,387
140
22228 30,000 50,814 41,274
60,000 41,274 33,525
4 -15/16
5
10,000 117,152 95,157
140
22328 30,000 84,258 68,439
60,000 68,439 55,590
10,000 82,187 66,756
150
22230 30,000 59,111 48,013
60,000 48,013 38,998
5 -3/16
10,000 131,571 106,869
150
22330 30,000 94,629 76,862
60,000 76,862 62,432
Note:
Bearing Reference
Guide
SELECTION
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
Shaft Size
L10
50
100
(Inches) (mm)
10,000 93,722 76,126
160
22232 30,000 67,407 54,751
60,000 54,751 44,472
5- 7/16
5-1/2
10,000 117,152 95,157
160
22332 30,000 84,258 68,439
60,000 68,439 55,590
10,000 108,140 87,837
170
22234 30,000 77,777 63,175
60,000 63,175 51,314
5- 15/16
6
10,000 129,768 105,405
170
22334 30,000 93,332 75,809
60,000 75,809 61,576
10,000 109,943 89,301
6 -7/16
180
22236 30,000 79,073 64,227
6-1/2
60,000 64,227 52,169
10,000 97,326 79,053
190
22238 30,000 69,999 56,857
60,000 56,857 46,182
6 -15/16
7
10,000 149,594 121,508
190
22338 30,000 107,591 87,391
60,000 87,391 70,984
10,000 108,140 87,837
7-3/16
200
22240 30,000 77,777 63,175
60,000 63,175 51,314
10,000 131,571 106,869
7 -1/2
7 -15/16 220
22244 30,000 94,629 76,862
8
60,000 76,862 62,432
8 -7/16
10,000 93,722 76,126
8 -1/2
23048 30,000 67,407 54,751
8-15/16,
60,000 54,751 44,472
9
10,000 122,559 99,549
9- 7/16
23052 30,000 88,147 71,598
9-1/2
60,000 71,598 58,155
9 -15/16
10,000 124,361 101,013
10
23056 30,000 89,444 72,651
10- 7/16
60,000 72,651 59,011
10-1/2
Note:
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
250
500
750
950
57,829
41,592
33,783
72,287
51,990
42,229
66,726
47,991
38,981
80,071
57,589
46,777
67,838
48,791
39,631
60,054
43,192
35,083
92,305
66,388
53,923
66,726
47,991
38,981
81,184
58,389
47,427
57,829
41,592
46,972
33,783
27,441
58,715
42,229
34,301
54,199
38,981
31,662
65,038
46,777
37,995
55,102
39,631
32,190
48,779
35,083
28,496
74,975
53,923
43,799
54,199
38,981
31,662
65,942
47,427
38,522
46,972
33,783
41,592
29,914
24,298
51,990
37,393
30,372
47,991
34,516
28,036
57,589
41,420
33,643
48,791
35,092
28,503
43,192
31,065
25,232
66,388
47,747
38,783
47,991
34,516
28,036
58,389
41,995
34,110
41,592
29,914
38,745
27,866
22,634
48,431
34,833
28,293
44,706
32,153
26,117
53,647
38,584
31,340
45,451
32,689
26,552
40,235
28,938
23,505
61,843
44,479
36,128
44,706
32,153
26,117
54,392
39,120
31,775
38,745
27,866
1,300 1,500 1,800 2,000 2,600 3,000 3,200 3,400

35,265
25,364
20,602
44,082
31,705
25,752
40,691
29,266
23,771
48,829
35,119
28,525
41,369
29,753
24,167
36,622
26,339
21,394
4500
33,783 31,985
24,298 23,004
19,736 18,685
38,981
28,036
22,772
39,631
28,503
23,152
33,783 27,441 24,298 22,634

75,623
54,390
44,178
76,735
55,190
61,425
44,178
35,884
62,328
44,828
54,390 50,666
39,118 36,440
31,774 29,599
55,190
39,694
44,828 36,412 32,241
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-18
PAGE B15-26
5,600
Bearing Reference
Guide
SELECTION
TRIPLE-TECT
LABYRINTH
& FACE
RUBBING
SEAL
SPLIT LER
LABYRINTH
SEAL
LER
LABYRINTH
SEAL
USAF/USN
SAF-XT
+
+
USAF/USN
SAF-XT
+
+
USAF/USN
SAF-XT
USAF/USN
SAF-XT
USAF/USN
SAF-XT
++
++
USAF/USN
SAF-XT
+
+
++
+
++
NS
NS
Notes:
High Temperature is above 200F
Consideration Of High Speed Can Be A Function Of Type

And Bearing Design
UNISPHERE II
Dusty/Dirty
Wet/Moisture Laden
High Pressure Power
Washdown
High Temperature
+
+
High Speed
Chemical
Misalignment
+
+
++ Very Good
+ Good
Questionable (Depends On Condition: Consult DODGE Engineering)
Not Recommended
NS Not Seal Limited
AUXILIARY
TACONITE
SEAL
DROP-IN TRIPLE TECT SEAL

The patented Drop-In TRIPLE-TECT Seal has all the sealing
features of the standard TRIPLE-TECT except it is pre-assem
bled at the factory for quick and easy field assembly. The DropIn TRIPLE-TECT Seal assembly consists of a seal ring, v-ring
seal and stainless metal seal with rubber bead.
IMPERIAL
While lowering the shaft bearing and seal assembly into the
housing base, the stainless metal seal with rubber bead fits in
the outboard v-shaped housing groove.
The stainless metal seal gives superior sealing surface to the
v-ring and positions the v-ring for easy cap to base housing
assembly.
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-19
PAGE B15-26
UNIFIED SAF
ENVIRONMENT/
APPLICATION
END COVER
S-2000
DROP IN
TRIPLE-TECT
SEAL
Specialty Tapered
Products
E-Family Roller
Bearings
UNIFIED SAF Bearing Seals
Bearing Reference
Guide
SELECTION
UNIFIED SAF Bearing Lubrication
DODGE UNIFIED pillow blocks are lubricated by the user at
installation. DODGE UNIFIED bearings are specially designed to
handle either grease or oil lubrication.
E-Family Roller
Bearings
GREASE LUBRICATION:
Specialty Tapered
Products
DODGE UNIFIED bearings are designed to meet the rigorous

demands of dirty, dusty or wet environments. In order to
properly protect bearings during installation, pack the bearing
insert 100% full of grease immediately after properly mounting
the bearing on the shaft. If the RPM of the application falls
between 20% and 80% of maximum RPM (Table1, page B1515 ), pack the lower half of the housing one-third to one-half
full. If the RPM of the application is less than 20% of maximum
RPM, pack bearing housing cavity 100% full. If the RPM
exceeds 80% of maximum RPM, do not add grease in the lower
half of the housing or in the cap.
At each re-greasing cycle, for applications up to 80% of
maximum RPM, slowly add grease until fresh grease is seen
purging at the seals. Re-greasing should be done while running.
Remote re-greasing lines should be added to avoid endangering
personnel. If the RPM is greater than 80% of maximum RPM,
add 4 strokes of a handgun at each re-greasing cycle for bores
up to 2. For bores greater than 2 up to 5, add 8 strokes of a

handgun at each re-greasing cycle. For bores greater than 5
up to 10-1/2, add 16 strokes of a handgun at each re-greasing
cycle. For bores greater than 10-1/2, and up to 12-1/2 add
32 strokes of a handgun at each re-greasing cycle. For bores
greater than 12-1/2 up to 15-3/4 add 64 strokes of a handgun
at each regreasing cycle. For units running above 80% of
maximum RPM, running temperature should be monitored.
If a drastic change in running temperature is noted, DODGE
recommends removing the used grease completely and
recharging with fresh grease per the above instructions. For
warning before catastrophic failure, see DODGE Smart Bearing
Package on page B15-54
Select a grease with a viscosity at an operating temperature
which will provide full film lubrication (see Table 3 below). Use a
50F to 100F increase in bearing temperature above ambient,
depending on RPM and load. Use Table4, page B15-21 as a
general guide for re-greasing the bearings. A small amount of
grease at frequent intervals is preferable to a large amount of
grease at infrequent intervals. For special applications involving
high speeds, high loads, or very low speeds, consult DODGE
Application Engineering (864-284-5700) during the hours of 8:00
a.m. and 5:00 p.m. Eastern Time.
S-2000
Table 3: Viscosity Of Oil, Or Oil In Grease

DN
Viscosity for Loads Up

To 18% of Dyn. Cap.*
(SUS @ Oper. Temp.)
DN
CST
UNISPHERE II
IMPERIAL
100
3500
700
1400
200
3150
680
1600
300
2750
590
1800
400
2375
500
2000
500
2000
460
3000
600
1750
360
4000
700
1500
320
5000
800
1300
280
6000
900
1075
220
7000
1000
900
140
8000
DN = Bore Diameter (ins) x RPM
* For loads above 18% of dynamic capacity, an EP grease with viscosity selected from above is recommended
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-20
Viscosity for Loads Up

To 18% of Dyn. Cap.*
(SUS. @ Oper. Temp.)
CST
625
525
450
400
300
200
150
130
110
100
140
120
95
85
63
43
32
28
22
20
PAGE B15-26
DODGE UNIFIED bearings are designed to accept oil

lubrication. Oil lubrication is normally required at high speeds
as well as high loads, or whenever heat from an external source
is flowing into the bearing. Oil lubrication may be static or
circulating. With static oil, fill the bearing cavity with oil up to the
center line of the lowest roller. This height is identified as W and
is shown on pages B15-22, B15-23, B15-37, B15-39, B15-63,
B15-97, B15-105, and B15-117.Mount an oil sight gauge in the
drilled and tapped hole on the side of the pillow block for visual
indication of this level. The oil level may drop or rise during
operation depending on the direction of rotation of the bearing.

Both the static oil level and the running oil level should be
marked on the oil sight gauge and properly identified. Oil should
be replaced at least semiannually. For circulating oil, the oil
flow rate and size of factory drilled and tapped return drains are
shown in Table 5, up to 8 bore. The viscosity of the oil should
be selected based on the guidelines shown on Table3, page
B15-20. If the RPM of the application is within the specifications
of this catalog, and if the temperature of the bearings is 80F to
100F or greater above ambient, a lighter viscosity oil may be
required.
Table 4: Re-Greasing Intervals, Months*, Based On 12 Hours Per Day, 150-F Max.
Shaft Size
RPM
Adapter Mtg.
(in.)
Direct Mtg.
(mm)
1-7/16 - 1-15/16
2-3/16
2-7/16 - 3
3-3/16 - 3-1/2
3-15/16 - 4-1/2
40-55
60-65
70-85
90-100
110-130
250
8
7
6
5
4
500
6
5
4
3
3
750
4
3
3
2
2
1000
3
2
2
1
1
1250
2
1
1
.50
.50
4-15/16 - 5-1/2
140-160
.50
.25
2000
.50
.50
.25
.25
2500
.50
.25
.25
3000
.25
.25
S-2000
.50
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-21
PAGE B15-26
UNIFIED SAF
IMPERIAL
UNISPHERE II
5-15/16 - 7-3/16
170-200
2
1
1
7-1/2 - 9-1/2
220
1
1
.50
9-15/16 - 10-1/2
1
.50
10-15/16 - 12-1/2
1
.50
12-15/16 - 15-3/4
.50
.25
* For continuous operations, 24 hours per day, decrease greasing interval by 50%
1500
1
1
.50
.50
.25
Bearing Reference
Guide
OIL LUBRICATION
E-Family Roller
Bearings
UNIFIED SAF Bearing Lubrication
Specialty Tapered
Products
SELECTION
Bearing Reference
Guide
SELECTION
UNIFIED SAF Circulating Oil
Table 5: Circulating Oil Flow Rates, Drain Hole Sizes, Thermocouple Location And Vibration Sensor Location
E-Family Roller
Bearings
Specialty Tapered
Products
Circulating Oil Flow*

Static
Maximum
Oil Level
Amount for
Inches W**
Heat
Amount Dissipation
Sufficient
Due to
for
External
Normal
Heat
500 & 600 &
Lubrication Source
200
300
Gal./Min
Gal./Min Series Series
.0025
.070
0.92
.0030
.090
1.09
1.19
.0040
.100
1.16
1.28
.0045
.120
1.38
.0050
.150
1.11
1.44
Shaft Size
Drain Hole,
Dry Sump ***
Thermocouple
Hole
Vibration
Sensor Hole
S-2000
Wall
Wall
600
300
500
200
Location
Location Thck. Location Thck.
Adptr Drct. Adptr. Drct.
Inches
Inches Inches Inches Inches
Mntg. Mntg. Mntg. Mntg.
USAF Housing
Inches mm Inches mm
X
Y
Size
A
B
C
E
Designation
1-7/16
509
1.09
0.63
1-8/27
0.25
0.38
1.56
1.31
1-11/16
40
510
308
1.35
1.18
1-8/27
0.27
0.30
1.14
0.97
1-15/16
1-7/16
45
511
609
309
1.31
0.83
1-8/27
0.28
0.53
1.89
1.13
1-11/16 50
610
310
2-3/16
1-15/16 55
513
611
311
1.66
0.78
1-8/27
0.34
0.58
2.02
1.13
2-7/16
75
60
515
215
312
.0060
.175
1.16
1.31
1.78
0.88
1/4-18
0.36
0.63
2.25
1.19
2-1/2
2-11/16
80
2-3/16
65
516
216
613
313
.0065
.195
1.25
1.41
1.97
0.95
1/4-18
0.31
0.50
2.28
1.52
2-3/4
2-15/16
85
70
517
217
314
.0075
.200
1.38
1.47
2.13
1.06
3/8-18
0.41
0.67
2.50
1.44
3
2-7/16
3-3/16
90
75
518
218
615
315
.0080
.250
1.47
1.59
2.25
1.13
3/8-18
0.44
0.61
2.72
1.45
2-1/2
2-11/16
80
616
316
.0100
.260
1.69
1.69
2.28
1.17
3/8-18
0.53
0.66
2.73
1.47
2-3/4
3-7/16
2-15/16
100
85
520
220
617
317
.0110
.350
1.64
1.75
2.63
1.25
3/8-18
0.53
0.70
3.08
1.67
3-1/2
3
*
Based on oil temperature of 130F - 150F & oil level at center line of lowest roller. For maximum oil flow values, both drains should be used.
Mount block with drain holes on right side of block center line when rotation is CCW, unless cast closed end.
Mount block with drain holes on left side of block center line when rotation is CW.
** Static oil level is measured from bottom of block base to meniscus on oil sight gauge. (Non-rotating mode)
*** For wet sump, consult DODGE Application Engineering.
For vibration sensors supplied by the user.
UNISPHERE II
STATIC OIL
LEFT SIDE
SIGHT GAGE (TO

BE SUPPLIED BY
USER)
THERMOCOUPLE
HOLE
IMPERIAL
W = STATIC OIL
LEVEL
CIRCULATION OIL
(Connect Both Drains)
DRAIN HOLE
(ONE ON EACH SIDE)
VIBRATION SENSOR HOLE

(NORMALLY 8-32 OR 1/4-28)
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-22
PAGE B15-26
UNIFIED SAF Circulating Oil
Table 5 (continued): Circulating Oil Flow Rates, Drain Hole Sizes, Thermocouple Location And Vibration Sensor
Location
Wall
Wall
500
200
600
300
Location
Location Thck. Location Thck.
Adptr Drct. Adptr. Drct.
Inches
Inches Inches Inches Inches
Mntg. Mntg. Mntg. Mntg.
USAF Housing
X
Y
Size
A
B
C
E
Inches mm Inches mm
Designation
3-15/16
110
522
222
0.015
0.42
1.80
2.88
1.34
3/8-18
0.53
0.53
3.36
1.72
4
3-7/16
4-3/16 120
100
524
224
620
320
0.0175
0.48
1.84
2.03
2.19
1.38
1/2-14
0.69
0.77
3.38
1.86
3-1/2
4-7/16
3-15/16
130
110
526
226
622
322
0.019
0.55
2.34
2.41
2.31
1.63
1/2-14
0.75
1.00
4.03
2.16
4-1/2
4
4-15/16
140
528
228
0.023
0.6
2.03
3.68
1.47
1/2-14
0.75
0.89
4.03
2.16
5
5-3/16 150 4-3/16 120
530
230
624
324
0.025
0.75
2.03
2.38
3.59
1.36
1/2-14
0.81
0.88
4.34
2.25
5-7/16
4-7/16
160
130
532
232
626
326
0.03
0.8
2.09
2.44
4.03
1.33
1/2-14
0.91
0.92
4.52
2.22
5-1/2
4-1/2
5-15/16
4-15/16
0.85
170
140
534
234
628
328
0.035
2.19
2.56
4.16
1.33
1/2-14
1.00
1.39
4.97
2.70
6
5
6-7/16
180 5-3/16 150
536
236
630
330
0.037
0.875
2.42
2.63
4.22
1.63
1/2-14
1.00
1.33
5.25
2.75
6-1/2
6-15/16
5-7/16 160
190
538
238
632
332
0.039
1
2.53
2.69
4.75
1.61
1/2-14
1.13
1.25
5.50
2.75
7
5-1/2
7-3/16
5-15/16
200
170
540
240
634
334
0.042
1
2.47
2.75
4.91
1.53
1/2-14
1.13
1.25
5.81
2.84
6
7-1/2
6-15/16
544S
244
638
338
220
7
190
0.05
1.4
3.25
2.38
5.44
2.03
1/2-14
1.19
1.50
6.63
2.36
7-15/16
544
8
*
Based on oil temperature of 130F - 150F & oil level at center line of lowest roller. For maximum oil flow values, both drains should be used.
Mount block with drain holes on right side of block center line when rotation is CCW, unless cast closed end.
Mount block with drain holes on left side of block center line when rotation is CW.
** Static oil level is measured from bottom of block base to meniscus on oil sight gauge. (Non-rotating mode)
*** For wet sump, consult DODGE Application Engineering.
For vibration sensors supplied by the user.
E-Family Roller
Bearings
Vibration
Sensor Hole
Specialty Tapered
Products
Thermocouple
Hole
S-2000
Drain Hole,
Dry Sump ***
UNISPHERE II
Circulating Oil Flow*

Static
Maximum
Oil Level
Amount for
Inches W**
Heat
Amount Dissipation
SufDue to
ficient for
External
Normal
Heat
500 & 600 &
Lubrication Source
200
300
Gal./Min
Gal./Min Series Series
Shaft Size
Bearing Reference
Guide
SELECTION
STATIC OIL
SIGHT GAGE (TO

BE SUPPLIED BY
USER)
THERMOCOUPLE
HOLE
CIRCULATION OIL
(Connect Both Drains)
IMPERIAL
LEFT SIDE
E
B
W = STATIC OIL
LEVEL
VIBRATION SENSOR HOLE

(NORMALLY 8-32 OR 1/4-28)
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-23
PAGE B15-26
UNIFIED SAF
DRAIN HOLE
(ONE ON EACH SIDE)
Bearing Reference
Guide
SELECTION
UNIFIED SAF Housing Ratings
E-Family Roller
Bearings
Table 6: USAF Housing Ratings And Cap Bolt Ratings*

Recommended Housing
Recommended Cap
Cap Loads
Bolt Loads
P120
P150
P180
P120
P150
P180
P90
USAF
USAF
USAF
USAF
Ib.
Ib.
Ib.
Ib.
Ib.
Ib.
Ib.
509
6600
4200
3600
4600
19800
11300
9900
510
308
7800
5000
4400
5400
19800
11300
9900
511
610
310
11400
7165
6575
7875
27120
15600
13560
513
611
311
13360
8260
7680
9200
27120
15600
13560
515
215
312
13360
8260
7680
9220
36200
20800
18100
516
216
613
313
12800
8000
7400
8900
57600
33000
28800
517
217
314
13600
9200
8400
10200
57600
33000
28800
518
218
615
315
17500
11350
10200
12100
57600
33000
28800
616
316
17600
12000
10500
12200
57600
33000
28800
520
220
617
317
22500
14200
12660
14700
85200
48900
42600
522
222
28100
17500
15500
17800
85200
48900
42600
524
224
620
320
24500
15400
13700
15800
85200
48900
42600
526
226
622
322
28970
18000
15900
18300
11800
67800
59000
528
228
35800
22100
19400
22300
154400
88700
77200
530
230
624
324
40000
24700
21600
25000
154400
88700
77200
532
232
626
326
40200
24800
21700
25100
154400
88700
77200
534
234
628
328
52000
32200
28200
33000
154400
88700
77200
536
236
630
330
78200
49200
43300
52800
154400
88700
77200
538
238
632
332
80600
50800
44800
54800
215200
123000
107600
540
240
634
334
83800
53000
46700
57500
215200
123000
107600
544
244
638
338
101800
65600
58200
73800
312000
179000
156000
048
83800
53000
46700
54800
215200
123000
107600
052
101800
65600
58200
73800
312000
179000
156000
056
110200
71800
64000
82100
312000
179000
156000
* When utilizing heavy cap loads an pillow block housings, the installation must adhere to the following procedures.
1) The pillow block base bolts must have high strength (Grade 8) bolts and be properly tightened to mounting structure.
2) Stop bars (shear strips) must be used against the pillow block where side loads are encountered.
3) In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and life requirements.
For USDAF housing and Cap Bolt Ratings consult DODGE Application Engineering (864-284-5700).
Pillow Block Designation
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-24
Cap Bolt
Information
Cap Bolt
Torque
SAE
(No.) Size (Ft-Lb)
Grade
(4) 3/8-16
24-30
5
(4) 3/8-16
24-30
5
(4)7/16-14
40-50
5
(4) 7/16-14
40-50
5
(4) 1/2-13
60-75
5
(4) 5/8-11 120-150
5
(4) 5/8-11 120-150
5
(4) 5/8-11 120-150
5
(4) 5/8-11 120-150
5
(4) 3/4-10 208-260
5
(4) 3/4-10 208-260
5
(4) 3/4-10 208-260
5
(4) 7/8-9
320-430
5
(4) 1-8
512-640
5
(4) 1-8
512-640
5
(4) 1-8
512-640
5
(4) 1-8
512-640
5
(4) 1-8
512-640
5
(4) 1-1/4-7 896-1120
5
(4) 1-1/4-7 896-1120
5
(4) 1-1/2-6 1560-1950
5
(4) 1-1/4-7 896-1120
5
(4) 1-1/2-6 1560-1950
5
(4) 1-1/2-6 1560-1950
5
PAGE B15-26
Bearing Reference
Guide
SELECTION
UNIFIED SAF Expansion Capabilities
Table 7: UNIFIED 500, 200, 600 And 300 Series And Split-Spher Pillow Blocks Total Expansion Capability
Shaft Size
600
Adptr.
Mntg.
Inches
1-7/16
1-11/16
1-15/16
300
Drct.
Mntg.
mm
40
45
50
55
509
510
511
513
609
610
611*
308
309
310
311*
1/4
1/4
1/4
7/16
5/16
75
60
515
215
312
1/4
80
2-7/16
65
516
216
613
313
3/8
85
70
517
217
314
3/8
3-3/16
90
75
518
615
315
3/8
80
616
316
3/8
85
520
220
617
317
3/8
522
222
100
524
224
620
320
3/8
110
526
226
622
322
3/8
528
228
120
4-7/16, 4-1/2
4-15/16
5
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
7-3/16
130
7-1/2,
220
7-15/16
8
8-7/16, 8-1/2
8-15/16, 9
9-7/16, 9-1/2
9-15/16, 10
10-7/16
10-1/2
* 1/4 Total Expansion
140
3/8
3/8
150
4-3/16
120
530
230
624
324
3/8
160
4-7/16,4-1/2
130
532
232
626
326
3/8
170
4-15/16,5
140
534
234
628
328
3/8
180
5-3/16
150
536
236
630
330
3/8
160
538
238
632
332
3/8
170
540
240
634
334
3/8
244
638
338
3/8
190
200
5-7/16
5-1/2
5-15/16, 6
6-15/16
7
544S
190
544
048
5/8
052
056
9/16
1-5/8
056L
1-5/8
FEATURES/BENEFITS
PAGE B15-3
S-2000
4-3/16
3-7/16
3-1/2
3-15/16, 4
UNISPHERE II
110
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-25
PAGE B15-26
IMPERIAL
100
218
UNIFIED SAF
3-7/16
3-1/2
3-15/16, 4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
USAF Housing Designation
Specialty Tapered
Products
200
Drct.
Mntg.
mm
-
E-Family Roller
Bearings
Total
Expansion,
Inches
500
Adptr.
Mntg.
Inches
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
Bearing Reference
Guide
USAF 500 Adapter Mount Pillow Block with TRIPLE-TECT Seal Assembly
500 SERIES OPEN END HOUSING
A***
E-Family Roller
Bearings
S-1
Shaft
Dia
S-1
Specialty Tapered
Products
1-7/16
1-11/16
1-15/16
2-3/16
S-2000
2-7/16
2-1/2
UNISPHERE II
2-11/16
2-3/4
2-15/16
IMPERIAL
3-3/16
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
Complete
Pillow Block
Part No.
P2B509-USAF-107TT
043015
P2B510-USAF-111TT
043048
P2B511-USAF-115TT
043248
P2B513-USAF-203TT
043249
P4B513-USAF-203TT
039579
P2B515-USAF-207TT
041860
P4B515-USAF-207TT
041861
P2B515-USAF-208TT
041862
P4B515-USAF-208TT
041863
P2B516-USAF-211TT
042406
P4B516-USAF-211TT
044015
P2B516-USAF-212TT
042409
P4B516-USAF-212TT
042423
P2B517-USAF-215TT
041864
P4B517-USAF-215TT
041865
P2B517-USAF-300TT
041866
P4B517-USAF-300TT
041867
P2B518-USAF-303TT
042422
P4B518-USAF-303TT
044115
Housing
W/ Stab Ring
Part No.
H2S-509-USAF
043995
H2S-510-USAF
043996
H2S-511-USAF
043997
H2S-513-USAF
043998
H4S-513-USAF
039669
H2S-515-USAF
044000
H4S-515-USAF
044003
H2S-515-USAF
044000
H4S-515-USAF
044003
H2S-516-USAF
044198
H4S-516-USAF
044007
H2S-516-USAF
044198
H4S-516-USAF
044007
H2S-517-USAF
044010
H4S-517-USAF
044013
H2S-517-USAF
044010
H4S-517-USAF
044013
H2S-518-USAF
044199
H4S-518-USAF
044114
Bearing
Part No.
BRG22209KC3
422134
BRG22210KC3
422137
BRG22211KC3
422123
BRG22213KC3
422124
BRG22213KC3
422124
BRG22215KC3
422001
BRG22215KC3
422001
BRG22215KC3
422001
BRG22215KC3
422001
BRG22216KC3
422003
BRG22216KC3
422003
BRG22216KC3
422003
BRG22216KC3
422003
BRG22217KC3
422005
BRG22217KC3
422005
BRG22217KC3
422005
BRG22217KC3
422005
BRG22218KC3
422007
BRG22218KC3
422007
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-26
Dynamic
Capacity
(C), lbs.
Max RPM
(Grease)
24,500
5,600
26,000
5,300
31,500
4,500
45,500
3,800
48,000
3,400
48,000
3,400
56,000
3,200
56,000
3,200
68,000
3,000
68,000
3,000
78,000
2,600
SELECTION
PAGE B15-13
FEATURES/BENEFITS
PAGE B15-3
----12TTDN115
039852
14TTDN203
039853
14TTDN203
039853
20TTDN207
039538
20TTDN207
039538
20TTDN208
039854
20TTDN208
039854
24TTDN211
039855
24TTDN211
039855
24TTDN212
039856
24TTDN212
039856
28TTDN215
039530
28TTDN215
039530
28TTDN300
039857
28TTDN300
039857
34TTDN303
039858
34TTDN303
039858
#LER
Part No.
08LER107
042193
10LER111
*042199
12LER115
042512
14LER203
042513
14LER203
042513
20LER207
042514
20LER207
042514
20LER208
042515
20LER208
042515
24LER211
042516
24LER211
042516
24LER212
042517
24LER212
042517
28LER215
042518
28LER215
042518
28LER300
042519
28LER300
042519
34LER303
042520
34LER303
042520
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-27
Aux
Part No.
End Cover
Part No.
12AUX115
041687
14AUX203
041688
14AUX203
041688
20AUX207
042380
20AUX207
042380
20AUX208
040890
20AUX208
040890
24AUX211
042381
24AUX211
042381
24AUX212
040891
24AUX212
040891
28AUX215
042382
28AUX215
042382
28AUX300
040918
28AUX300
040918
34AUX303
040892
34AUX303
040892
EC08
040700
EC10
040701
EC12
040702
EC14
040703
EC14
040703
EC20
040704
EC20
040704
EC20
040704
EC20
040704
EC24
040705
EC24
040705
EC24
040705
EC24
040705
EC28
040706
EC28
040706
EC28
040706
EC28
040706
EC34
040707
EC34
040707
SELECTION
PAGE B15-13
S-2000
H309-SNW-107
08TT107
046350
043578
H310-SNW-111
10TT111
1-11/16
046351
043579
H311-SNW-115
12TT115
1-15/16
046352
043540
H313-SNW-203
14TT203
046353
043541
2-3/16
H313-SNW-203
14TT203
046353
043541
H315-SNW-207
20TT207
046354
043542
2-7/16
H315-SNW-207
20TT207
046354
043542
H315-SNW-208
20TT208
046355
043543
2-1/2
H315-SNW-208
20TT208
046355
043543
H316-SNW-211
24TT211
046356
043544
2-11/16
H316-SNW-211
24TT211
046356
043544
H316-SNW-212
24TT212
046357
043545
2-3/4
H316-SNW-212
24TT212
046357
043545
H317-SNW-215
28TT215
046358
043546
2-15/16
H317-SNW-215
28TT215
046358
043546
H317-SNW-300
28TT300
046359
043547
3
H317-SNW-300
28TT300
046359
043547
H318-SNW-303
34TT303
046360
043548
3-3/16
H318-SNW-303
34TT303
046360
043548
# NOTE: LER seals are made from Aluminum unless otherwise noted by the * symbol.
If an * appears by the part number, the LER seal is manufactured from Steel.
1-7/16
TTDN
Part No.
UNISPHERE II
TRIPLE-TECT
Part No.
IMPERIAL
SNW
Part No.
UNIFIED SAF
Shaft
Dia
S-1
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
Bearing Reference
Guide
Shaft
Dia
S-1
E-Family Roller
Bearings
3-7/16
3-1/2
3-15/16
Specialty Tapered
Products
4
4-3/16
4-7/16
4-1/2
4-15/16
S-2000
5
5-3/16
5-7/16
5-1/2
UNISPHERE II
5-15/16
6
6-7/16
6-1/2
6-15/16
IMPERIAL
7
7-3/16
7-1/2
7-15/16
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
Complete
Pillow Block
Part No.
P2B520-USAF-307TT
041868
P4B520-USAF-307TT
041869
P2B520-USAF-308TT
041870
P4B520-USAF-308TT
041871
P4B522-USAF-315TT
041872
P4B522-USAF-400TT
041873
P4B524-USAF-403TT
042431
P4B526-USAF-407TT
041874
P4B526-USAF-408TT
041875
P4B528-USAF-415TT
041876
P4B528-USAF-500TT
041877
P4B530-USAF-503TT
042438
P4B532-USAF-507TT
041878
P4B532-USAF-508TT
041879
P4B534-USAF-515TT
041880
P4B534-USAF-600TT
041881
P4B536-USAF-607TT
041882
P4B536-USAF-608TT
041883
P4B538-USAF-615TT
041884
P4B538-USAF-700TT
041885
P4B540-USAF-703TT
039606
P4B544-USAF-708TT
042445
P4B544-USAF-715TT
041886
Housing
W/ Stab Ring
Part No.
H2S-520-USAF
044020
H4S-520-USAF
044023
H2S-520-USAF
044020
H4S-520-USAF
044023
H4S-522-USAF
044025
H4S-522-USAF
044025
H4S-524-USAF
044202
H4S-526-USAF
044031
H4S-526-USAF
044031
H4S-528-USAF
044034
H4S-528-USAF
044034
H4S-530-USAF
044203
H4S-532-USAF
044040
H4S-532-USAF
044040
H4S-534-USAF
044043
H4S-534-USAF
044043
H4S-536-USAF
044046
H4S-536-USAF
044046
H4S-538-USAF
044049
H4S-538-USAF
044049
H4S-540-USAF
039681
H4S-544S-USAF
044054
H4S-544-USAF
044055
Bearing
Part No.
BRG22220KC3
422009
BRG22220KC3
422009
BRG22220KC3
422009
BRG22220KC3
422009
BRG22222KC3
422011
BRG22222KC3
422011
BRG22224KC3
422013
BRG22226KC3
422015
BRG22226KC3
422015
BRG22228KC3
422017
BRG22228KC3
422017
BRG22230KC3
422019
BRG22232KC3
422021
BRG22232KC3
422021
BRG22234KC3
422023
BRG22234KC3
422023
BRG22236KC3
422025
BRG22236KC3
422025
BRG22238KC3
422027
BRG22238KC3
422027
BRG22240KC3
422064
BRG22244KC3
422029
BRG22244KC3
422029
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-28
Dynamic
Capacity
(C), lbs.
Max
RPM
(Grease)
96,500
2,200
96,500
2,200
122,000
2,000
122,000
2,000
143,000
1,900
170,000
1,800
170,000
1,800
196,000
1,700
196,000
1,700
228,000
1,600
260,000
1,500
260,000
1,500
300,000
1,300
300,000
1,300
305,000
1,300
305,000
1,300
270,000
1,200
270,000
1,200
300,000
900
365,000
950
365,000
950
SELECTION
PAGE B15-13
H320-SNW-307
46TT307
046361
043549
3-7/16
H320-SNW-307
46TT307
046361
043549
H320-SNW-308
46TT308
046362
043550
3-1/2
H320-SNW-308
46TT308
046362
043550
H322-SNW-315
50TT315
3-15/16
046363
043551
H322-SNW-400
50TT400
4
046364
043552
H3124-SNW-403
52TT403
4-3/16
046430
043553
H3126-SNW-407
54TT407
4-7/16
046431
043554
H3126-SNW-408
54TT408
4-1/2
046432
043555
H3128-SNW-415
56TT415
4-15/16
046433
043556
H3128-SNW-500
56TT500
5
046434
043557
SNW30X503
58TT503
5-3/16
043618
043558
SNW32X507
60TT507
5-7/16
043619
043559
SNW32X508
60TT508
5-1/2
043634
043574
SNW34X515
64TT515
5-15/16
043620
043560
SNW34X600
64TT600
6
043621
043561
SNW36X607
68TT607
6-7/16
043622
043562
SNW36X608
68TT608
6-1/2
043623
043563
SNW38X615
72TT615
6-15/16
043624
043564
SNW38X700
72TT700
7
043625
043565
SNW40X703
74TT703
7-3/16
046545
046421
SNW44X708
76TT708
7-1/2
043627
043567
SNW44X715
78TT715
7-15/16
043626
043566
FEATURES/BENEFITS
PAGE B15-3
#LER
Part No.
Aux
Part No.
End Cover
Part No.
46TTDN307
039859
46TTDN307
039859
46TTDN308
039860
46TTDN308
039860
50TTDN315
039861
50TTDN400
039862
52TTDN403
039863
54TTDN407
039864
54TTDN408
039865
56TTDN415
039866
56TTDN500
039867
---
46LER307
042521
46LER307
042521
46LER308
042522
46LER308
042522
50LER315
042523
50LER400
042524
52LER403
042525
54LER407
042526
54LER408
042527
56LER415
042528
56LER500
042529
58LER503
042530
60LER507
042531
60LER508
042532
64LER515
042533
64LER600
042534
68LER607
042535
68LER608
042536
72LER615
042537
72LER700
042538
74LER703
043386
76LER708
042539
78LER715
042540
46AUX307
042383
46AUX307
042383
46AUX308
040919
46AUX308
040919
50AUX315
042384
50AUX400
040893
52AUX403
044360
54AUX407
042385
54AUX408
042386
56AUX415
042387
56AUX500
040894
EC46
040708
EC46
040708
EC46
040708
EC46
040708
EC50
040709
EC50
040709
EC52
040710
EC54
040711
EC54
040711
EC56
040712
EC562
040712
EC58
040713
EC60
040714
EC60
040714
EC64
040681
EC64
040681
EC68
040682
EC68
040682
EC72
040683
EC72
040683
---
-------------
-----------
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-29
60AUX507
042388
60AUX508
040895
64AUX515
042389
64AUX600
041646
68AUX607
042390
68AUX608
042391
72AUX615
042392
72AUX700
043109
74AUX703
040690
76AUX708
040896
78AUX715
042393*
Bearing Reference
Guide
TTDN
Part No.
E-Family Roller
Bearings
TRIPLE-TECT
Part No.
Specialty Tapered
Products
SNW
Part No.
EC76
040684
EC78
040685
SELECTION
PAGE B15-13
UNIFIED SAF
Shaft
Dia
S-1
S-2000
UNISPHERE II
IMPERIAL
Bearing Reference
Guide
Shaft
Dia
S-1
E-Family Roller
Bearings
8
8-7/16
8-1/2
8-15/16
9
Specialty Tapered
Products
9-7/16
9-1/2
9-15/16
10
10-7/16
S-2000
10-1/2
Complete
Pillow Block
Part No.
P4B544-USAF-800TT
041887
P4B048-USAF-807TT
042447
P4B048-USAF-808TT
042448
P4B048-USAF-815TT
042449
P4B048-USAF-900TT
042453
P4B052-USAF-907TT
042454
P4B052-USAF-908TT
422544
P4B056-USAF-915TT
042458
P4B056-USAF-1000TT
041628
P4B056-USAF-1007TT
042463
P4B056-USAF-1008TT
042464
Housing
W/ Stab Ring
Part No.
H4S-544-USAF
044055
H4S-048-USAF
044200
H4S-048-USAF
044200
H4S-048-USAF
044200
H4S-048-USAF
044200
H4S-052-USAF
422542
H4S-052-USAF
422542
H4S-056-USAF
422560
H4S-056-USAF
422560
H4S-056L-USAF
044201
H4S-056L-USAF
044201
Bearing
Part No.
BRG22244KC3
422029
BRG23048KC3
422031
BRG23048KC3
422031
BRG23048KC3
422031
BRG23048KC3
422031
BRG23052KC3
422543
BRG23052KC3
422543
BRG23056KC3
422030
BRG23056KC3
422030
BRG23056KC3
422030
BRG23056KC3
422030
Dynamic
Capacity
(C), lbs.
Max
RPM
(Grease)
365,000
950
260,000
950
260,000
950
260,000
950
260,000
950
340,000
900
340,000
900
345,000
850
345,000
850
345,000
850
345,000
850
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-30
SELECTION
PAGE B15-13
SNW
Part No.
TRIPLE-TECT
Part No.
SNW44X800
78TT800
043628
043568
SNP3048X807
90TT807
8-7/16
043629
043569
SNP3048X808
90TT808
8-1/2
043630
043570
SNP3048X815
90TT815
8-15/16
043631
043571
SNP3048X900
90TT900
9
043632
043572
SNP3052X907
84TT907
9-7/16
043585
043538
SNP3052X908
84TT908
9-1/2
422538
422545
SNP3056X915
92TT915
9-15/16
043586
043575
SNP3056X1000
92TT1000
10
043633
043573
SNP3056X1007
94TT1007
10-7/16
043580
047940
SNP3056X1008
94TT1008
10-1/2
422567
047941
-----------------------
#LER
Part No.
Aux
Part No.
End Cover
Part No.
78LER800
042541*
90LER807
042542*
90LER808
042543*
90LER815
042544*
90LER900
042545*
84LER907
042510*
84LER908
422594
92LER915
042511*
92LER1000
041082*
94LER1007
042036*
94LER1008
422573*
78AUX800
042394*
90AUX807
040897*
90AUX808
040898*
EC78
040685
EC90
042368
EC90
042368
EC90
042368
EC90
042368
EC84
422606
EC84
422606
EC92
042369
EC92
042369
EC94
040689
EC94
040689
90AUX900
040995*
84AUX907
040900*
84AUX908
040901*
92AUX1000
042395*
94AUX1008
042396*
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-31
SELECTION
PAGE B15-13
UNIFIED SAF
IMPERIAL
UNISPHERE II
TTDN
Part No.
Bearing Reference
Guide
Shaft
Dia
S-1
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
Bearing Reference
Guide
500 SERIES CAST CLOSED HOUSING
Shaft
Dia
S-1
E-Family Roller
Bearings
1-7/16
1-11/16
1-15/16
2-3/16
Specialty Tapered
Products
2-7/16
2-1/2
2-11/16
S-2000
2-3/4
2-15/16
UNISPHERE II
3-3/16
IMPERIAL
3-7/16
Complete
Pillow Block
Part No.
Housing
Part No.**
Bearing
Part No.
CP2B509-USAF-107TT
CH2S-509-USAF
BRG22209KC3
039575
039665
422134
CP2B510--USAF-111TT
CH2S-510-USAF
BRG22210KC3
039576
039666
422137
CP2B511-USAF-115TT
CH2S-511-USAF
BRG22211KC3
039577
039667
422123
CP2B513-USAF-203TT
CH2S-513-USAF
BRG22213KC3
039578
039668
422124
CP4B513-USAF-203TT
CH4S-513-USAF
BRG22213KC3
039580
039670
422124
CP2B515-USAF-207TT
CH2S-515-USAF
BRG22215KC3
039581
039544
422001
CP4B515-USAF-207TT
CH4S-515-USAF
BRG22215KC3
039582
039545
422001
CP2B515-USAF-208TT
CH2S-515-USAF
BRG22215KC3
039583
039544
422001
CP4B515-USAF-208TT
CH4S-515-USAF
BRG22215KC3
039584
039545
422001
CP2B516-USAF-211TT
CH2S-516-USAF
BRG22216KC3
039585
039671
422003
CP4B516-USAF-211TT
CH4S-516-USAF
BRG22216KC3
039586
039672
422003
CP2B516-USAF-212TT
CH2S-516-USAF
BRG22216KC3
039587
039671
422003
CP4B516-USAF-212TT
CH4S-516-USAF
BRG22216KC3
039588
039672
422003
CP2B517-USAF-215TT
CH2S-517-USAF
BRG22217KC3
039589
039508
422005
CP4B517-USAF-215TT
CH4S-517-USAF
BRG22217KC3
039590
039509
422005
CP2B517-USAF-300TT
CH2S-517-USAF
BRG22217KC3
039591
039508
422005
CP4B517-USAF-300TT
CH4S-517-USAF
BRG22217KC3
039592
039509
422005
CP2B518-USAF-303TT
CH2S-518-USAF
BRG22218KC3
039593
039673
422007
CP4B518-USAF-303TT
CH4S-518-USAF
BRG22218KC3
039594
039674
422007
CP2B520-USAF-307TT
CH2S-520-USAF
BRG22220KC3
039595
039675
422009
CP4B520-USAF-307TT
CH4S-520-USAF
BRG22220KC3
039596
039676
422009
Dynamic Max
Capacity RPM
(C), lbs. (Grease)
24,500
26,000
31,500
45,500
45,500
48,000
48,000
48,000
48,000
56,000
56,000
56,000
56,000
68,000
68,000
68,000
68,000
78,000
78,000
96,500
96,500
5,600
5,300
4,500
3,800
3,800
3,400
3,400
3,400
3,400
3,200
3,200
3,200
3,200
3,000
3,000
3,000
3,000
2,600
2,600
2,200
2,200
1-7/16 - 4-15/16 Seals

SNW
Part No.
TRIPLE-TECT
Part No.
Drop In
TRIPLE-TECT
Part No.
# LER
Part No.
H309-SNW-107
08TT107
046350
043578
H310-SNW-111
10TT111
046351
043579
H311-SNW-115
12TT115
12TTDN115
12LER115
046352
043540
039852
042512
041687
H313-SNW-203
14TT203
14TTDN203
14LER203
14AUX203
-----
08LER107
042193
10LER111
042199
046353
043541
039853
042513
041688
14TT203
14TTDN203
14LER203
14AUX203
046353
043541
039853
042513
041688
H315-SNW-207
20TT207
20TTDN207
20LER207
20AUX207
046354
043542
039538
042514
042380
H315-SNW-207
20TT207
20TTDN207
20LER207
20AUX207
046354
043542
039538
042514
042380
H315-SNW-208
20TT208
20TTDN208
20LER208
20AUX208
046355
043543
039854
042515
040890
H315-SNW-208
20TT208
20TTDN208
20LER208
20AUX208
046355
043543
039854
042515
040890
H316-SNW-211
24TT211
24TTDN211
24LER211
24AUX211
046356
043544
039855
042516
042381
H316-SNW-211
24TT211
24TTDN211
24LER211
24AUX211
046356
043544
039855
042516
042381
H316-SNW-212
24TT212
24TTDN212
24LER212
24AUX212
046357
043545
039856
042517
040891
H316-SNW-212
24TT212
24TTDN212
24LER212
24AUX212
046357
043545
039856
042517
040891
H317-SNW-215
28TT215
28TTDN215
28LER215
28AUX215
046358
043546
039530
042518
042382
H317-SNW-215
28TT215
28TTDN215
28LER215
28AUX215
046358
043546
039530
042518
042382
H317-SNW-300
28TT300
28TTDN300
28LER300
28AUX300
046359
043547
039857
042519
040918
H317-SNW-300
28TT300
28TTDN300
28LER300
28AUX300
046359
043547
039857
042519
040918
H318-SNW-303
34TT303
34TTDN303
34LER303
34AUX303
046360
043548
039858
042520
040892
H318-SNW-303
34TT303
34TTDN303
34LER303
34AUX303
046360
043548
039858
042520
040892
H320-SNW-307
46TT307
46TTDN307
46LER307
46AUX307
046361
043549
039859
042521
042383
H320-SNW-307
46TT307
46TTDN307
46LER307
46AUX307
046361
043549
039859
042521
042383
UNIFIED SAF
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-32
12AUX115
H313-SNW-203
# Note: LER seals are made from Aluminum unless otherwise noted by the * symbol.
FEATURES/BENEFITS
PAGE B15-3
Aux
Taconite
Part No.
SELECTION
PAGE B15-13
Bearing Reference
Guide
4-3-16
4-7/16
4-1/2
4-15/16
5
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
7-3/16
7-1/2
7-15/16
CP2B520-USAF-308TT
CH2S-520-USAF
BRG22220KC3
039597
039675
422009
CP4B520-USAF-308TT
CH4S-520-USAF
BRG22220KC3
039598
039676
422009
CP4B522-USAF-305TT
CH4S-522-USAF
BRG22222KC3
039599
039677
422011
CP4B522-USAF-400TT
CH4S-522-USAF
BRG22222KC3
039600
039677
422011
CP4B524-USAF-403TT
CH4S-524-USAF
BRG22224KC3
039601
039678
422013
CP4B526-USAF-407TT
CH4S-526-USAF
BRG22226KC3
039602
039679
422015
CP4B526-USAF-408TT
CH4S-526-USAF
BRG22226KC3
039603
039679
422015
CP4B528-USAF-415TT
CH4S-528-USAF
BRG22228KC3
039604
039680
422017
CP4B528-USAF-500TT
CH4S-528-USAF
BRG22228KC3
039605
039680
422017
CP4B530-USAF-503TT
CH4S-530-USAF
BRG2223KC3
039138
039217
422019
CP4B532-USAF-507TT
CH4S-532-USAF
BRG22232KC3
039141
039218
422021
CP4B532-USAF-508TT
CH4S-532-USAF
BRG22232KC3
039142
039218
422021
CP4B534-USAF-515TT
CH4S-534-USAF
BRG22234KC3
039147
039219
422023
CP4B534-USAF-600TT
CH4S-534-USAF
BRG22234KC3
039148
039219
422023
CP4B536-USAF-607TT
CH4S-536-USAF
BRG22236KC3
039151
039220
422025
CP4B536-USAF-608TT
CH4S-536-USAF
BRG22236KC3
039152
039220
422025
CP4B538-USAF-615TT
CH4S-538-USAF
BRG22238KC3
039155
039221
422027
CP4B538-USAF-700TT
CH4S-538-USAF
BRG22238KC3
039156
039221
422027
CP4B540-USAF-703TT
CH4S-540-USAF
BRG22240KC3
039159
039222
422064
CP4B544-USAF-708TT CH4S-544S-USAF
BRG22244KC3
039160
039223
422029
CP4B544-USAF-715TT
CH4S-544-USAF
BRG22244KC3
039163
039224
422029
Dynamic
Capacity
(C) Lbs.
Max
RPM
Ler
(Grease)
96,500
2,200
96,500
122,000
122,000
143,000
170,000
170,000
196,000
196,000
228,000
2,200
2,000
2,000
1,900
1,800
1,800
1,700
1,700
1,600
260,000
1,500
260,000
1,500
300,000
300,000
305,000
305,000
270,000
270,000
300,000
365,000
365,000
1,300
1,300
1,300
1,300
1,200
1,200
900
950
950
5- 10-1/2 Seals
Snw
Part No.
Triple Tect
Part No.
Drop In
Triple Tect
Part No.
# Ler
Part No.
Aux
Taconite
Part No.
H320-SNW-308
46TT308
46TTDN308
46LER308
46AUX308
046362
043550
039860
042522
040919
H320-SNW-308
46TT308
46TTDN308
46LER308
46AUX308
046362
043550
039860
042522
040919
H322-SNW-315
50TT315
50TTDN315
50LER315
50AUX315
046363
043551
039861
042523
042384
H322-SNW-400
50TT400
50TTDN400
50LER400
50AUX400
046364
043552
039862
042524
040893
H3124-SNW-403
52TT403
52TTDN403
52LER403
52AUX403
046430
043553
039863
042525
044360
H3126-SNW-407
54TT407
54TTDN407
54LER407
54AUX407
046431
043554
039864
042526
042385
H3126-SNW-408
54TT408
54TTDN408
54LER408
54AUX408
046432
043555
039865
042527
042386
H3128-SNW-415
56TT415
56TTDN415
56LER415
56AUX415
046433
043556
039866
042528
042387
H3128-SNW-500
56TT500
56TTDN500
56LER500
56AUX500
039867
042529
040894
046434
043557
SNW30X503
58TT503
043618
043558
SNW32X507
60TT507
043619
043559
SNW32X508
60TT508
043634
043574
SNW34X515
64TT515
043620
043560
SNW34X600
64TT600
043621
043561
SNW36X607
68TT607
043622
042562
SNW36X608
68TT608
043623
043563
SNW38X615
72TT615
043624
043564
SNW38X700
72TT700
043625
043565
SNW40X703
74TT703
046545
046421
SNW44X708
76TT708
043627
043567
SNW44X715
78TT715
043626
043566
-------------------------
58LER503
042530
60LER507
60LER508
040895
64LER515
64AUX515
042533
042389
64LER600
64AUX600
042534
041646
68LER607
68AUX607
042535
042390
68LER608
68AUX608
042536
042391
72LER615
72AUX615
042537
042392
72LER700
72AUX700
042538
043109
74LER703
74AUX703
043386
040690
76LER708
76AUX708
042539
040896
78LER715
78AUX715
042540
042393*
If an * appears by the part number, the LER seal is manufactured from steel.
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-33
60AUX508
042532
# NOTE: LER seals are made from aluminum unless otherwise noted by the * symbol.
FEATURES/BENEFITS
PAGE B15-3
60AUX507
042531
SELECTION
PAGE B15-13
S-2000
Bearing
Part No.
UNISPHERE II
3-15/16
Housing
Part No.**
IMPERIAL
3-1/2
Complete
Pillow Block
Part No.
UNIFIED SAF
Shaft
Dia
S-1
E-Family Roller
Bearings
Specialty Tapered
Products
Bearing Reference
Guide
Shaft
Dia
S-1
E-Family Roller
Bearings
8
8-7/16
8-1/2
8-15/16
9
Specialty Tapered
Products
9-7/16
9-1/2
9-15/16
10
10-7/16
10-1/2
S-2000
Complete
Pillow Block
Part No.
Housing
Part No.**
Bearing
Part No.
CP4B544-USAF-800TT
CH4S-544-USAF
BRG22244KC3
039164
039224
422029
CP4B048-USAF-807TT
CH4S-048-USAF
BRG23048KC3
039165
039225
422031
CP4B048-USAF-808TT
CH4S-048-USAF
BRG23048KC3
039166
039225
422031
CP4B048-USAF-815TT
CH4S-048-USAF
BRG23048KC3
039167
039225
422031
CP4B048-USAF-900TT
CH4S-048-USAF
BRG23048KC3
039168
039225
422031
CP4B052-USAF-907TT
CH4S-052-USAF
BRG23052KC3
039169
039226
422543
CP4B052-USAF-908TT
CH4S-052-USAF
BRG23052KC3
039170
039226
422543
CP4B056-USAF-915TT
CH4S-056-USAF
BRG23056KC3
039171
039227
422030
CP4B056-USAF-1000TT
CH4S-056-USAF
BRG23056KC3
039172
039227
422030
CP4B056-USAF-1007TT
CH4S-056L-USAF
BRG23056KC3
039173
039228
422030
CP4B056-USAF-1008TT
CH4S-056L-USAF
BRG23056KC3
039174
039228
422030
Dynamic
Capacity
(C) Lbs.
Max
RPM
LER
(Grease)
365,000
950
260,000
260,000
260,000
260,000
340,000
340,000
345,000
345,000
345,000
345,000
800
800
800
800
750
750
700
700
700
700
5- 10-1/2 Seals
SNW
Part No.
Triple Tect
Part No.
SNW44X800
78TT800
043628
043568
SNP3048X807
90TT807
043629
043569
SNP3048X808
90TT808
043630
043570
SNP3048X815
90TT815
043631
043571
SNP3048X900
90TT900
043632
043572
SNP3052X907
84TT907
043585
043538
SNP3052X908
84TT908
422538
422545
SNP3056X915
92TT915
043586
043575
SNP3056X1000
92TT1000
043633
043573
SNP3056X1007
94TT1007
043580
047940
SNP3056X1008
94TT1008
422567
047941
Drop In
Triple Tect
Part No.
-----------------------
# LER
Part No.
Aux
Taconite
Part No.
78LER800
78AUX800
042541*
042394*
90LER807
90AUX807
042542*
040897*
90LER808
90AUX808
042543*
040898*
90LER815
042544*
90LER900
040995*
84LER907
84AUX907
042510*
040900*
84LER908
84AUX908
042594*
040901*
92LER915
042511*
92LER1000
92AUX1000
041082*
042395*
94LER1007
042036*
94LER1008
94AUX1008
422573*
042396*
# NOTE: LER seals are made from aluminum unless otherwise noted by the * symbol.
If an * appears by the part number, the LER seal is manufactured from steel.
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-34
90AUX900
042545*
SELECTION
PAGE B15-13
Bearing Reference
Guide
USAF 500 Adapter Mount Pillow Block Housing
500 Housing
FEATURES/BENEFITS
PAGE B15-3
Closed End Housing
039762
039669
Approx.
Wt. (Lbs)
22.5
22.5
044000
24.8
044003
044198
28.0
044010
4-Bolt
039665
039666
039667
039668
Appox.
Wt. (Lbs)
10.0
12.1
16.5
22.4
26.4
039544
044007
28.0
34.7
044013
044199
36.8
044020
61.2
Part No.
039670
Appox.
Wt. (Lbs)
23.5
23.5
26.6
039545
27.9
039671
29.0
039672
38.3
039508
37.0
039509
40.6
044114
37.2
039673
40.7
039674
41.2
044023
61.8
039675
65.3
039676
65.9
044025
78.9
039677
84.0
044202
90.6
039678
96.1
044031
121.6
039679
128.2
044034
152.2
039680
162.2
044203
170.5
039217
182.3
044040
220.1
039218
235.2
044043
269.9
039219
282.8
044046
328.5
039220
349.7
044049
384.7
039221
409.4
039681
044054
393.0
624.0
039222
039223
403.0
634.0
044055
621.0
039224
631.0
044200
386.0
039225
412.2
422542
575.0
039226
590.4
Part No.
Part No.
Part No.
29.0
422560
692.0
039227
722.6
044201
690.0
039228
720.0
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-35
SELECTION
PAGE B15-13
E-Family Roller
Bearings
043995
043996
043997
043998
Appox.
Wt. (Lbs)
9.5
11.3
15.6
21.4
2-Bolt
Specialty Tapered
Products
4-Bolt
S-2000
1-7/16
509
1-11/16
510
1-15/16
511
2-3/16
513
2-7/16
515
2-1/2
2-11/16
516
2-3/4
2-15/16
517
3
3-3/16
518
3-7/16
520
3-1/2
3-15/16
522
4
4-3/16
524
4-7/16
526
4-1/2
4-15/16
528
5
5-3/16
530
5-7/16
532
5-1/2
5-15/16
534
6
6-7/16
536
6-1/2
6-15/16
538
7
7-3/16
540
7-1/2
544S
7-15/16
544
8
8-7/16
8-1/2
048
8-15/16
9
9-7/16
052
9-1/2
9-15/16
056
10
10-7/16
056L
10-1/2
Includes Stabilizing Ring(s)
2-Bolt
UNISPHERE II
Housing
IMPERIAL
Thru Housing
UNIFIED SAF
S-1
Shaft Size
(Inch)
Bearing Reference
Guide
USAF 500 Housing Dimensions
P
30
E-Family Roller
Bearings
LUBE NOTE:
All Sizes Use A
1/8-27 NPT Hydraulic
Grease Fitting
DRAIN HOLE SIZE
J
"F" BOLTS
Specialty Tapered
Products
M
Y
H
X
"D" MIN
"D" MAX
B
S-2000
EXP
UNISPHERE II
S-1
NON-EXP
IMPERIAL
CL HSG
E
W
STATIC
OIL
LEVEL
CL HSG
S
UNIFIED SAF
K
(AT CL SHAFT)
A1
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-36
SELECTION
PAGE B15-13
S-1
Shaft
Size
Bearing Reference
Guide
3.88
4.06
4.25
4.64
8.25
8.25
9.63
11.00
2.38
2.34
2.75
3.13
Min
6.25
6.50
7.38
8.50
Max
7.00
7.00
8.25
9.50
Min
8.13
Max
9.50
1.88
2-Bolt
1/2
1/2
5/8
5/8
4-Bolt
509
510
511
513
515
5.20
11.13
3.13
8.63
9.63
8.63
9.63
1.88
5/8
1/2
516
5.44
12.59
3.50
9.63
11.00
9.63
11.00
2.13
3/4
5/8
517
5.39
12.59
3.50
9.88
11.00
9.88
11.00
2.13
3/4
5/8
518
6.16
13.63
3.88
10.25
11.75
10.38
11.63
2.13
3/4
5/8
520
6.39
15.36
4.34
11.63
13.13
11.63
13.13
2.38
7/8
3/4
522
7.16
16.50
4.75
12.59
14.50
2.75
3/4
524
8.05
16.50
4.72
13.25
14.50
2.75
3/4
526
8.27
18.38
5.13
14.50
16.00
3.25
7/8
528
8.77
19.69
5.88
15.63
17.38
3.38
1-7/16
509
0.88
4.30
1.78
2.25
4.88
1-11/16
510
1.03
4.59
1.88
2.50
5.13
1-15/16
511
1.03
5.25
1.97
2.75
5.78
2-3/16
513
1.03
5.94
2.16
3.00
6.50
2-7/16
515
1.25
6.44
2.31
3.25
7.06
2-1/2
2-11/16
516
1.06
6.75
2.42
3.50
7.94
2-3/4
2-15/16
517
1.25
7.38
2.47
3.75
8.19
3
3-3/16
518
1.44
7.75
2.84
4.00
8.66
3-7/16
520
1.66
8.75
3.16
4.50
9.78
3-1/2
3-15/16
522
1.78
9.41
3.30
4.94
10.59
4
4-3/16
524
1.50
10.25
3.64
5.25
11.25
4-7/16
526
2.06
11.53
3.75
6.00
12.41
4-1/2
4-15/16
528
2.06
11.81
4.00
6.00
13.25
5
Housing width with drain plugs
Distance shaft should extend beyond housing centerline if pillow block is closed end style
Non-expansion bearing offset from centerline. For expansion bearing S = 0
Dowel hole locations for Precision Positioning, see Page B15-24 - B15-25
FEATURES/BENEFITS
PAGE B15-3
4-Bolt
B15-37
1/2
Drain
Hole
Size
0.13
0.13
0.13
0.16
W
Static
Oil
Level
0.92
1.08
1.16
1.11
1.09
1.25
1.94
1.66
0.63
0.81
0.83
0.78
1/8-27NPSI
1/8-27NPSI
1/8-27NPSI
1/8-27NPSI
1.39
0.13
1.16
1.78
0.88
1/4-18NPSF
1.44
0.18
1.25
1.97
0.95
1/4-18NPSF
1.50
0.19
1.38
2.13
1.06
3/8-18NPSF
1.72
0.19
1.47
2.50
1.13
3/8-18NPSF
1.92
0.19
1.64
2.63
1.25
3/8-18NPSF
2.09
0.19
1.80
2.88
1.34
3/8-18NPSF
2.28
0.19
1.84
3.19
1.38
1/2-14NPSF
2.47
0.19
2.34
3.31
1.63
1/2-14NPSF
2.45
0.19
2.03
3.63
1.47
1/2-14NPSF
1.03
1.11
1.20
1.38
NOMENCLATURE
PAGE B15-8
PAGE B15-7
SELECTION
PAGE B15-13
E-Family Roller
Bearings
Specialty Tapered
Products
Housing
2-Bolt
F
Bolt Dia.
A1
S-2000
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4
4-3/16
4-7/16
4-1/2
4-15/16
5
D
Housing
UNISPHERE II
S-1
Shaft
Size
IMPERIAL
UNIFIED SAF
Bearing Reference
Guide
P
30
E-Family Roller
Bearings
LUBE NOTE:
All Sizes Use A
Grease Fitting
DRAIN HOLE SIZE
J
"F" BOLTS
Specialty Tapered
Products
M
Y
H
X
"D" MIN
"D" MAX
B
S-2000
EXP
UNISPHERE II
S-1
NON-EXP
IMPERIAL
CL HSG
E
W
STATIC
OIL
LEVEL
CL HSG
S
UNIFIED SAF
K
(AT CL SHAFT)
A1
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-38
SELECTION
PAGE B15-13
530
9.36
20.88
6.25
Min
-
Max
-
Min
16.75
Max
18.25
3.75
532
9.92
21.66
6.25
17.38
19.25
3.75
534
9.91
24.75
6.75
19.38
21.63
4.25
536
10.41
26.75
7.13
20.88
23.63
4.63
538
10.81
28.00
7.50
21.63
24.38
4.50
1-1/4
540
544S
11.53
28.75
8.00
22.50
25.00
5.00
1-1/4
12.30
32.75
8.80
24.75
27.88
5.25
1-1/2
048
11.53
28.75
8.00
22.50
25.00
5.00
1-1/4
052
12.30
32.75
8.88
24.75
27.88
5.25
1-1/2
13.66
34.25
9.00
26.25
29.50
5.50
1-1/2
544
2-Bolt
4-Bolt
F
Bolt Dia.
2-Bolt
4-Bolt
1
A1
Bearing Reference
Guide
D
Housing
FEATURES/BENEFITS
PAGE B15-3
0.19
W
Static
Oil Level
2.03
3.59
1.33
Drain
Hole
Size
1/2-14NPSF
2.97
0.19
2.09
4.03
1.33
1/2-14NPSF
3.13
0.19
2.19
4.16
1.33
1/2-14NPSF
3.16
0.19
2.42
4.22
1.63
1/2-14NPSF
3.30
0.19
2.53
4.75
1.61
1/2-14NPSF
3.50
0.19
2.47
4.91
1.53
1/2-14NPSF
3.73
0.19
3.25
5.44
2.03
1/2-14NPSF
3.56
0.00
2.25
3.88
0.00
2.89
4.00
0.00
2.36
2.45
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-39
UNISPHERE II
S-1
Shaft
Housing
H
J
K
M
P
Size
5-3/16
530
2.38
12.50
4.33
6.31
14.31
5-7/16
532
2.34
13.31
4.63
6.69
14.91
5-1/2
5-15/16
534
2.88
14.56
4.63
7.06
16.81
6
6-7/16
536
3.00
15.13
4.88
7.50
17.19
6-1/2
6-15/16
538
3.13
15.81
5.06
7.88
18.00
7
7-3/16
540
3.38
16.63
5.44
8.25
19.00
7-1/2
544S
7-15/16
3.75
18.88
5.81
9.50
21.25
544
8
8-7/16
8-1/2
48
3.38
16.63
5.44
8.25
19.00
8-15/16
9
9-7/16
52
3.75
18.88
5.81
9.50
21.25
9-1/2
9-15/16
56
10
4.00
20.00
6.38
9.88
22.31
10-7/16
056L
10-1/2
Non-expansion bearing offset from centerline. For expansion bearing S = 0
IMPERIAL
056L
S-2000
056
SELECTION
PAGE B15-13
UNIFIED SAF
S-1
Shaft
Size
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
7-3/16
7-1/2
7-15/16
8
8-7/16
8-1/2
8-15/16
9
9-7/16
9-1/2
9-15/16
10
10-7/16
10-1/2
E-Family Roller
Bearings
Specialty Tapered
Products
Bearing Reference
Guide
USAF 500 Pillow Block Seals
LENGTH THRU BORE W/SEALS
A
E-Family Roller
Bearings
S-1
Specialty Tapered
Products
TRIPLE-TECT Seal
S-2000
General purpose seal for wet

or dirty environments
AUXILIARY TACONITE Seal

For dusty environments and
low to moderate speeds
UNISPHERE II
LER SEAL
High speed seal for relatively

clean environments
SPLIT Seal
IMPERIAL
Permits easy installation in

hard-to-reach applications
without removing shaft.
Non-metallic split LER
See page B11-80 for
SPLIT Seal part numbers
DROP-IN TRIPLE-TECT Seal

UNIFIED SAF
DODGE exclusive. popular

TRIPLE-TECT features with
simplified installation.
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-40
END COVER Seal
Allows use of open shaft housing

as closed-end
SELECTION
PAGE B15-13
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-41
Bearing Reference
Guide
TTDN
LER
AUX
3.97
4.14
4.34
4.72
3.97
4.14
4.34
4.72
3.42
3.61
3.83
4.19
6.56
6.73
6.69
7.56
4.94
4.94
4.47
7.47
5.33
5.33
4.72
7.72
5.44
5.44
4.83
7.95
6.20
6.20
5.70
8.27
6.78
6.78
6.19
9.06
7.06
7.13
6.59
9.05
7.91
7.59
7.31
8.08
8.08
7.50
10.63
8.47
8.47
7.88
11.13
9.28
9.28
8.70
9.78
9.78
9.20
11.95
9.83
9.83
9.13
11.88
10.39
10.39
9.69
12.94
10.69
10.69
9.98
13.23
11.44
10.72
15.28
-
12.13
12.13
11.34
12.06
11.72
15.53
12.77
11.41
16.22
13.92
12.66
17.13
14.05
12.66
17.13
SELECTION
PAGE B15-13
15.97
E-Family Roller
Bearings
040700
040701
040702
040703
040704
040704
040705
040705
040706
040706
040707
040708
040708
040709
040709
040710
040711
040711
040712
040712
040713
040714
040714
040681
040681
040682
040682
040683
040683
040691
040684
040685
040685
042368
042368
042368
042368
422606
422606
042369
042369
042397
042397
TT
Specialty Tapered
Products
End
Cover
S-2000
UNISPHERE II
500 Seals - Inch

Part Numbers
S-1
Seal
Triple-Tect
#Metal
Auxiliary
Shaft size
Housing
Triple-Tect
Group
Drop-in
Labyrinth
Taconite
(Inch)
(TT)
(TTDN)
(LER)
(AUX)
1-7/16
509
8
043578
042193
041685
1-11/16
510
10
043579
042199
041686
1-15/16
511
12
043540
039852
042512
041687
2-3/16
513
14
043541
039853
042513
041688
2-7/16
043542
039538
042514
042380
515
20
2-1/2
043543
039854
042515
040890
2-11/16
043544
039855
042516
042381
516
24
2-3/4
043545
039856
042517
040891
2-15/16
043546
039530
042518
042382
517
28
3
043547
039857
042519
040918
3-3/16
518
34
043548
039858
042520
040892
3-7/16
043549
039859
042521
042383
520
46
3-1/2
043550
039860
042522
040919
3-15/16
043551
039861
042523
042384
522
50
4
043552
039862
042524
040893
4-3/16
524
52
043553
039863
042525
044360
4-7/16
043554
039864
042526
042385
526
54
4-1/2
043555
039865
042527
042386
4-15/16
043556
039866
042528
042387
528
56
5
043557
039867
042529
040894
5-3/16
530
58
043558
042530
5-7/16
043559
042531
042388
532
60
5-1/2
043574
042532
040895
5-15/16
043560
042533
042389
534
64
6
043561
042534
041646
6-7/16
043562
042535
042390
536
68
6-1/2
043563
042536
042391
6-15/16
043564
042537
042392
538
72
7
043565
042538
043109
7-3/16
540
74
046421
043386
040690
7-1/2
544S
76
043567
042539
040896
7-15/16
043566
042540
042393
544
78
8
043568
042541*
042394
8-7/16
043569
042542*
040897
8-1/2
043570
042543*
040898
048
90
8-15/16
043571
042544*
040899
9
043572
042545*
040995
9-7/16
043538
042510*
040900
052
84
9-1/2
422545
422594*
040901
043575
042511*
9-15/16
056
92
10
043573
041082*
042395
10-7/16
047940
042036*
056L
94
10-1/2
047941
422573*
042396
IMPERIAL
UNIFIED SAF
Bearing Reference
Guide
USAF 22200K and 23000K Spherical Roller Bearings
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-42
SELECTION
PAGE B15-13
A
Inch (mm)
B
Inch (mm)
C
Inch (mm)
509
510
511
513
22209K
22210K
22211K
22213K
422134
422137
422123
422124
1.2
1.3
1.8
3.2
1.7717 (45)
1.9685 (50)
2.1654 (55)
2.5591 (65)
3.3465 (85)
3.5233 (90)
3.9370 (100)
4.7244 (120)
.9055 (23)
.9055 (23)
.9843 (25)
1.2205 (31)
515
22215K
422001
3.6
2.9528 (75)
5.1181 (130)
1.2205 (31)
516
22216K
422003
4.4
3.1496 (80)
5.5188 (140)
1.2992 (33)
517
22217K
422005
5.5
3.3465 (85)
5.9055 (150)
1.4173 (36)
518
22218K
422007
7.0
3.5433 (90)
6.2992 (160)
1.5748 (40)
520
22220K
422009
10.4
3.9370 (100)
7.0866 (180)
1.8110 (46)
522
22222K
422011
14.9
4.3307 (110)
7.8740 (200)
2.0866 (53)
524
22224K
422013
18.7
4.7244 (120)
8.4646 (215)
2.2865 (58)
526
22226K
422015
23.4
5.1181 (130)
9.0551 (230)
2.5197 (64)
528
22228K
422017
29.5
5.5118 (140)
9.8425 (250)
2.6772 (68)
530
22230K
422019
37.5
5.9055 (150)
10.6299 (270)
2.8740 (73)
532
22232K
422021
48.1
6.2992 (160)
11.4173 (290)
3.1496 (80)
534
22234K
422023
58.0
6.6929 (170)
12.2047 (310)
3.3858 (86)
536
22236K
422025
60.8
7.0866 (180)
12.5984 (320)
3.3858 (86)
538
22238K
422027
78.9
7.4803 (190)
13.3858 (340)
3.6220 (92)
540
544S
22240K
422064
94.1
7.8740 (200)
14.1732 (360)
3.8583 (98)
22244K
422029
129.0
8.6614 (220)
14.7480 (400)
4.2520 (108)
048
23048K
422031
73.4
9.4488 (240)
14.1732 (360)
3.6220 (92)
052
23052K
422543
106.0
10.2362 (260)
15.7480 (400)
4.0945 (104)
23056K
422030
114.0
11.0236 (280)
16.5354 (430)
4.1732 (106)
544
056
Bearing Reference
Guide
Approx.
Wt. (Lbs)
E-Family Roller
Bearings
Part No.
Specialty Tapered
Products
Bearing No.
S-2000
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4
4-3/16
4-7/16
4-1/2
4-15/16
5
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
7-3/16
7-1/2
7-15/16
8
8-7/16
8-1/2
8-15/16
9
9-7/16
9-1/2
9-15/16
10
10-7/16
10-1/2
Housing
056L
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-43
SELECTION
PAGE B15-13
UNIFIED SAF
S-1
Shaft
Size
(Inch)
UNISPHERE II
USAF 22200K and 23000K Spherical Roller Bearings
IMPERIAL
Bearing Reference
Guide
USAF 500 Adaptor Assembly (SNW)
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
V
Shaft Dia. (In)
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4
4-3/16
4-7/16
4-1/2
4-15/16
5
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
7-3/16
7-1/2
7-15/16
8
8-7/16
8-1/2
8-15/16
9
9-7/16
9-1/2
9-15/16
10
10-7/16
10-1/2
Housing
509
510
511
513
515
516
517
518
520
522
524
526
528
530
532
534
536
538
540
544S
544
048
052
056
056L
FEATURES/BENEFITS
PAGE B15-3
SNW/SNP
Number
H309-SNW-107
H310-SNW-111
H311-SNW-115
H313-SNW-203
H315-SNW-207
H315-SMW-208
H316-SNW-211
H316-SNW-212
H317-SNW-215
H317-SNW-300
H318-SNW-303
H320-SNW-307
H320-SNW-308
H322-SNW-315
H322-SNW-400
H3124-SNW-403
H3126-SNW-407
H3126-SNW-408
H3128-SNW-415
H3128-SNW-500
SNW30-503
SNW32-507
SNW32-508
SNW34-515
SNW34-600
SNW36-607
SNW36-608
SNW38-615
SNW38-700
SNW40-703
SNW44-708
SNW44-715
SNW44-800
SNP048-807
SNP048-808
SNP048-815
SNP048-900
SNP052-907
SNP052-908
SNP056-915
SNP056-1000
SNP056-1007
SNP056-1008
Part
Number
046350
046351
046352
046353
046354
046355
046356
046357
046358
046359
046360
046361
046362
046363
046364
046430
046431
046432
046433
046434
043618
043619
043634
043620
043621
043622
043623
043624
043625
046545
043627
043626
043628
043629
043630
043631
043632
043585
422538
043586
043633
043580
422567
Approx Wt.
(Lbs)
1.0
1.0
0.8
1.6
2.6
2.3
2.6
2.6
3.0
2.5
3.1
4.6
4.4
5.6
5.0
6.5
9.2
8.6
10.0
9.0
12.7
15.9
15.0
17.6
17.0
17.0
18.0
18.0
17.0
30.7
30.2
36.0
34.7
38.0
30.0
28.0
22.0
41.1
40.0
43.7
42.0
30.0
28.0
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-44
L
(in.)
2.53
2.69
2.97
3.38
F
Max (in.)
0.52
0.58
0.58
0.64
M
(in.)
1.58
1.77
1.85
2.10
3.88
0.69
2.29
4.16
0.69
2.37
4.41
0.72
2.47
4.66
0.80
2.63
5.19
0.83
2.87
5.72
0.86
3.19
6.12
0.92
3.47
6.75
0.95
3.76
7.09
1.02
3.97
7.69
1.08
4.22
8.06
1.14
4.57
8.66
1.23
4.83
9.06
1.27
5.02
9.47
1.30
5.26
9.84
1.36
5.48
11.00
1.42
5.90
11.44
1.73
5.44
12.19
1.80
6.02
13.00
1.89
6.19
SELECTION
PAGE B15-13
Bearing Reference
Guide
Stab. Ring Part No.
041987
042335
042315
042316
041174
041172
041175
041173
041176
041177
041185
041178
041179
041186
041180
041181
041184
041182
046639
041183
041161
422554
041213
Stab. Ring No.
308
609/309
610/310
611/311
312
613/313
314
615/315
616/316
617/317
620/320
622/322
624/324
626/326
628/328
630/330
632/332
634/334
638/338
10-8
11-9
0-10
6-11
15-0
16-13
17-14
18-15
19-16
20-17
24-20
0-22
0-24
0-26
0-28
36-30
38-32
40-34
44-38
Stab. Ring Part No.
042335
042315
046642
046632
041174
041172
041175
041173
046643
041176
041185
046635
046634
046637
046638
041184
041182
046639
041183
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-45
SELECTION
PAGE B15-13
UNIFIED SAF
IMPERIAL
509
9-9
510
10-8
511
11-9
513
13-0
515/215
15-0
516/216
16-13
517/217
17-14
518/218
18-15
520/220
20-17
522/222
22-19
524/224
24-20
526/226
26-0
528/228
28-0
530/230
30-0
532/232
32-0
534/234
34-0
536/236
36-30
538/238
38-32
540/240
40-34
544S/544/244
44-38
* 048
A8897
* 052
A8898
* 056/056L
A8819
* Two stabilizing rings required per housing
Part numbers for reference only. Housings come equipped with stabilizing rings enclosed
Housing
S-2000
Stab. Ring No.
UNISPHERE II
Housing
Specialty Tapered
Products
E-Family Roller
Bearings
USAF Stabilizing Rings
Bearing Reference
Guide
USAF/SN D-Mount Adapter System
1. Saves time removing bearing from shaft!
2. Reduces the use of blue flame torches!
3. Increases uptime!
E-Family Roller
Bearings
4. Lowers maintenance costs!
Specialty Tapered
Products
D-MOUNT TOOL
S-2000
UNISPHERE II
D-MOUNT TOOL - SNW - BEARING WITH TOOL

ASSEMBLED READY TO REMOVE BEARING
For use on 22209K through 22244K size bearings
D-MOUNT ADAPTER SLEEVE
IMPERIAL
HOW IT WORKS
Split D-Mount tool is mounted on D-Mount adapter and uses socket head cap
screws to force the inner ring off the taper to unlock the bearing from the adapter
sleeve. No additional space allowance is required.
This adapter sleeve is used in place of the standard adapter sleeve.
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-46
SELECTION
PAGE B15-13
Description-Inch
D-Mount Adapter
with Removal Feature-USAF500
DH09-SNW-107
DH10-SNW-111
DH11-SNW-115
DH13-SNW-203
DH15-SNW-207
DH15-SNW-208
DH16-SNW-211
DH1 6-SNW-212
DH17-SNW-215
DH17-SNW-300
DH18-SNW-303
DH20-SNW-307
DH20-SNW-308
DH22-SNW-315
DH22-SNW-400
DH24-SNW-403
DH26-SNW-407
DH26-SNW-408
DH28-SNW-415
DH28-SNW-500
DH30-SNW-503
DH32-SNW-507
DH32-SNW-508
DH34-SNW-515
DH34-SNW-600
DH36-SNW-607
DH36-SNW-608
DH38-SNW-615
DH38-SNW-700
DH40-SNW-703
DH44-SNW-708
DH44-SNW-715
DH44-SNW-800
Description-Metric
D-Mount Adapter
with Removal Feature-USN500
047815 *
047816 *
047817 *
047818 *
047819 *
047820 *
047821 *
047822 *
047823 *
047824 *
047825 *
047826 *
047827 *
047828 *
047829 *
047830 *
047831 *
DH09-SNW-40M
DH10-SNW-45M
DH11-SNW-50M
DH12-SNW-55M
DH13-SNW-60M
DH15-SNW-65M
DH16-SNW-70M
DH17-SNW-75M
DH18-SNW-80M
DH19-SNW-85M
DH20-SNW-90M
DH22-SNW-100M
DH24-SNW-110M
DH26-SNW-115M
DH28-SNW-125M
DH30-SNW-135M
DH32-SNW-140M
Bearing Reference
Guide
Part No.
Description
D-Mount Adapter Removal Tools
046872
D-MOUNT TOOL 09
046873
D-MOUNT TOOL 10
046874
D-MOUNT TOOL 11
046850
D-MOUNT TOOL 12
046875
D-MOUNT TOOL 13
046876
D-MOUNT TOOL 15
046877
D-MOUNT TOOL 16
046878
D-MOUNT TOOL 17
046879
D-MOUNT TOOL 18
046851
D-MOUNT TOOL 19
046880
D-MOUNT TOOL 20
046881
D-MOUNT TOOL 22
046882
D-MOUNT TOOL 24
046883
D-MOUNT TOOL 26
046884
D-MOUNT TOOL 28
046885
D-MOUNT TOOL 30
046886
D-MOUNT TOOL 32
046887
D-MOUNT TOOL 34
046891
D-MOUNT TOOL 36
046892
D-MOUNT TOOL 38
046893
D-MOUNT TOOL 40
046894
D-MOUNT TOOL 44
NOTE: The D-MOUNT Adapter Sleeve SNW Assembly should be used in place of the standard SNW assembly during

installation. The D-MOUNT tool will be needed during removal.
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-47
SELECTION
PAGE B15-13
UNIFIED SAF
IMPERIAL
046960
046961
046962
046963
046964
046965
046966
046967
046968
046969
046970
046971
046972
046973
046974
046975
046976
046977
046978
046979
046980
046981
046982
046983
046984
046985
046986
046987
046988
046989
046991
046992
046993
* Made to order.
Part No.
E-Family Roller
Bearings
Part No.
Specialty Tapered
Products
PART NUMBERS AND DESCRIPTION
S-2000
D-MOUNT Adapter System SAF/SN Mounted Bearings
UNISPHERE II
Bearing Reference
Guide
USAF 500 Air Handling Pillow Blocks with TRIPLE-TECT Seals
A***
E-Family Roller
Bearings
LUBE NOTE:
All Sizes Use A
Grease Fitting
S-1
Specialty Tapered
Products
Shaft
Dia
S-1
1-7/16
1-11/16
S-2000
1-15/16
2-3/16
2-7/16
UNISPHERE II
2-1/2
2-11/16
IMPERIAL
2-3/4
2-15/16
Complete
Pillow Block
Part No.
P2B509-USAF-107TTAH
039100
P2B510-USAF-111TTAH
039101
P2B511-USAF-115TTAH
039102
P2B513-USAF-203TTAH
039103
P4B513-USAF-203TTAH
039113
P2B515-USAF-207TTAH
039104
P4B515-USAF-207TTAH
039114
P2B515-USAF-208TTAH
039105
P4B515-USAF-208TTAH
039115
P2B516-USAF-211TTAH
039106
P4B516-USAF-211TTAH
039116
P2B516-USAF-212TTAH
039107
P4B516-USAF-212TTAH
039117
P2B517-USAF-215TTAH
039108
P4B517-USAF-215TTAH
039118
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
Housing
W/ Stab Ring
Part No.
H2S-509-USAF
043995
H2S-510-USAF
043996
H2S-511-USAF
043997
H2S-513-USAF
043998
H4S-513-USAF
039669
H2S-515-USAF
044000
H4S-515-USAF
044003
H2S-515-USAF
044000
H4S-515-USAF
044003
H2S-516-USAF
044198
H4S-516-USAF
044007
H2S-516-USAF
044198
H4S-516-USAF
044007
H2S-517-USAF
044010
H4S-517-USAF
044013
Bearing
Part No.
BRG22209KC3AH
422980
BRG22210KC3AH
422981
BRG22211KC3AH
422982
BRG22213KC3AH
422983
BRG22213KC3AH
422983
BRG22215KC3AH
422984
BRG22215KC3AH
422984
BRG22215KC3AH
422984
BRG22215KC3AH
422984
BRG22216KC3AH
422985
BRG22216KC3AH
422985
BRG22216KC3AH
422985
BRG22216KC3AH
422985
BRG22217KC3AH
422986
BRG22217KC3AH
422986
Dynamic
Capacity
(C), lbs.
Max
Rpm
(Grease)
24,500
5,600
26,000
5,300
31,500
4,500
45,500
3,800
45,500
3,800
48,000
3,400
48,000
3,400
48,000
3,400
48,000
3,400
56,000
3,200
56,000
3,200
56,000
3,200
56,000
3,200
68,000
3,000
68,000
3,000
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-48
SNW
Part No.
TRIPLE-TECT
Part No.
H309-SNW-107
046350
H310-SNW-111
046351
H311-SNW-115
046352
H313-SNW-203
046353
H313-SNW-203
046353
H315-SNW-207
046354
H315-SNW-207
046354
H315-SNW-208
046355
H315-SNW-208
046355
H316-SNW-211
046356
H316-SNW-211
046356
H316-SNW-212
046357
H316-SNW-212
046357
H317-SNW-215
046358
H317-SNW-215
046358
08TT107
043578
10TT111
043579
12TT115
043540
14TT203
043541
14TT203
043541
20TT207
043542
20TT207
043542
20TT208
043543
20TT208
043543
24TT211
043544
24TT211
043544
24TT212
043545
24TT212
043545
28TT215
043546
28TT215
043546
SELECTION
PAGE B15-13
End
Cover
Part No.
EC08
040700
EC10
040701
EC12
040702
EC14
040703
EC14
040703
EC20
040704
EC20
040704
EC20
040704
EC20
040704
EC24
040705
EC24
040705
EC24
040705
EC24
040705
EC28
040706
EC28
040706
Bearing Reference
Guide
3-7/16
3-1/2
3-15/16
4
4-3/16
4-7/16
4-1/2
4-15/16
5
P2B517-USAF-300TTAH
039109
P4B517-USAF-300TTAH
039119
P2B518-USAF-303TTAH
039110
P4B518-USAF-303TTAH
039120
P2B520-USAF-307TTAH
039111
P4B520-USAF-307TTAH
039121
P2B520-USAF-308TTAH
039112
P4B520-USAF-308TTAH
039122
P4B522-USAF-315TTAH
039123
P4B522-USAF-400TTAH
039124
P4B524-USAF-403TTAH
039125
P4B526-USAF-407TTAH
039126
P4B526-USAF-408TTAH
039127
P4B528-USAF-415TTAH
039128
P4B528-USAF-500TTAH
039129
H2S-517-USAF
044013
H4S-517-USAF
044013
H2S-518-USAF
044199
H4S-518-USAF
044114
H2S-520-USAF
044020
H4S-520-USAF
044023
H2S-520-USAF
044020
H4S-520-USAF
044023
H4S-522-USAF
044025
H4S-522-USAF
044025
H4S-524-USAF
044202
H4S-526-USAF
044031
H4S-526-USAF
044031
H4S-528-USAF
044034
H4S-528-USAF
044034
BRG22217KC3AH
422986
BRG22217KC3AH
422986
BRG22218KC3AH
422987
BRG22218KC3AH
422987
BRG22220KC3AH
422988
BRG22220KC3AH
422988
BRG22220KC3AH
422988
BRG22220KC3AH
422988
BRG22222KC3AH
422989
BRG22222KC3AH
422989
BRG22224KC3AH
422990
BRG22226KC3AH
422991
BRG22226KC3AH
422991
BRG22228KC3AH
422992
BRG22228KC3AH
422992
FEATURES/BENEFITS
PAGE B15-3
Dynamic
Capacity
(C), lbs.
Max
Rpm
(Grease)
68,000
3,000
68,000
3,000
78,000
2,600
78,000
2,600
96,500
2,200
96,500
2,200
96,500
2,200
96,500
2,200
122,000
2,000
122,000
2,000
143,000
1,900
170,000
1,800
170,000
1,800
196,000
1,700
196,000
1,700
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-49
SNW
Part No.
TRIPLE-TECT
Part No.
End
Cover
Part No.
H317-SNW-300
046359
H317-SNW-300
046359
H318-SNW-303
046360
H318-SNW-303
046360
H320-SNW-307
046361
H320-SNW-307
046361
H320-SNW-308
046362
H320-SNW-308
046362
H322-SNW-315
046363
H322-SNW-400
046364
H3124-SNW-403
046430
H3126-SNW-407
046431
H3126-SNW-408
046432
H3128-SNW-415
046433
H3128-SNW-500
046434
28TT300
043547
28TT300
043547
34TT303
043548
34TT303
043548
46TT307
043549
46TT307
043549
46TT308
043550
46TT308
043550
50TT315
043551
50TT400
043552
52TT403
043553
54TT407
043554
54TT408
043555
56TT415
043556
56TT500
043557
EC28
040706
EC28
040706
EC34
040707
EC34
040707
EC46
040708
EC46
040708
EC46
040708
EC46
040708
EC50
040709
EC50
040709
EC52
040710
EC54
040711
EC54
040711
EC56
040712
EC56
040712
SELECTION
PAGE B15-13
S-2000
Bearing
Part No.
UNISPHERE II
3-3/16
Housing
W/ Stab Ring
Part No.
IMPERIAL
Complete
Pillow Block
Part No.
UNIFIED SAF
Shaft
Dia
S-1
Specialty Tapered
Products
E-Family Roller
Bearings
USAF 500 Air Handling Pillow Blocks with TRIPLE-TECT Seals
Bearing Reference
Guide
USAF 500 Air Handling Pillow Blocks with LER Seals
A***
E-Family Roller
Bearings
LUBE NOTE:
All Sizes Use A
Grease Fitting
S-1
Specialty Tapered
Products
Shaft
Dia
S-1
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
Complete
Housing
Bearing
Pillow Block
W/ Stab Ring
Part No.
Part No.
Part No.
P2B509-USAF-107LERAH
H2S-509-USAF
BRG22209KC3
1-7/16
035762
043995
422980
H2S-510-USAF
BRG22210KC3
1-11/16
035763
043996
422981
H2S-511-USAF
BRG22211KC3
1-15/16
035764
043997
422982
H2S-513-USAF
BRG22213KC3
035765
043998
422983
2-3/16
H4S-513-USAF
BRG22213KC3
035775
039669
422983
H2S-515-USAF
BRG22215KC3
035766
044000
422984
2-7/16
H4S-515-USAF
BRG22215KC3
035776
044003
422984
H2S-515-USAF
BRG22215KC3
035767
044000
422984
2-1/2
H4S-515-USAF
BRG22215KC3
035777
044003
422984
H2S-516-USAF
BRG22216KC3
035768
044198
422985
2-11/16
H4S-516-USAF
BRG22216KC3
035778
044007
422985
H2S-516-USAF
BRG22216KC3
035769
044198
422985
2-3/4
H4S-516-USAF
BRG22216KC3
035779
044007
422985
H2S-517-USAF
BRG22217KC3
035770
044010
422986
2-15/16
H4S-517-USAF
BRG22217KC3
035780
044013
422986
FEATURES/BENEFITS
PAGE B15-3
Dynamic
Capacity
(C), lbs.
Max Rpm
LER
(Grease)
24,500
5,600
26,000
5,300
31,500
4,500
45,500
3,800
45,500
3,800
48,000
3,400
48,000
3,400
48,000
3,400
48,000
3,400
56,000
3,200
56,000
3,200
56,000
3,200
56,000
3,200
68,000
3,000
68,000
3,000
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-50
SNW
Part No.
# LER
Part No.
H309-SNW-107
046350
H310-SNW-111
046351
H311-SNW-115
046352
H313-SNW-203
046353
H313-SNW-203
046353
H315-SNW-207
046354
H315-SNW-207
046354
H315-SNW-208
046355
H315-SNW-208
046355
H316-SNW-211
046356
H316-SNW-211
046356
H316-SNW-212
046357
H316-SNW-212
046357
H317-SNW-215
046358
H317-SNW-215
046358
08LER107
042193
10LER111
042199 *
12LER115
042512
14LER203
042513
14LER203
042513
20LER207
042514
20LER207
042514
20LER208
042515
20LER208
042515
24LER211
042516
24LER211
042516
24LER212
042517
24LER212
042517
28LER215
042518
28LER215
042518
SELECTION
PAGE B15-13
End
Cover
Part No.
EC08
040700
EC10
040701
EC12
040702
EC14
040703
EC14
040703
EC20
040704
EC20
040704
EC20
040704
EC20
040704
EC24
040705
EC24
040705
EC24
040705
EC24
040705
EC28
040706
EC28
040706
Bearing Reference
Guide
FEATURES/BENEFITS
PAGE B15-3
68,000
3,000
68,000
3,000
78,000
2,600
78,000
2,600
96,500
2,200
96,500
2,200
96,500
2,200
96,500
2,200
122,000
2,000
122,000
2,000
143,000
1,900
170,000
1,800
170,000
1,800
196,000
1,700
196,000
1,700
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-51
SNW
Part No.
# LER
Part No.
H317-SNW-300
046359
H317-SNW-300
046359
H318-SNW-303
046360
H318-SNW-303
046360
H320-SNW-307
046361
H320-SNW-307
046361
H320-SNW-308
046362
H320-SNW-308
046362
H322-SNW-315
046363
H322-SNW-400
046364
H3124-SNW-403
046430
H3126-SNW-407
046431
H3126-SNW-408
046432
H3128-SNW-415
046433
H3128-SNW-500
046434
28LER300
042519
28LER300
042519
34LER303
042520
34LER303
042520
46LER307
042521
46LER307
042521
46LER308
042522
46LER308
042522
50LER315
042523
50LER400
042524
52LER403
042525
54LER407
042526
54LER408
042527
56LER415
042528
56LER500
042529
SELECTION
PAGE B15-13
End
Cover
Part No.
EC28
040706
EC28
040706
EC34
040707
EC34
040707
EC46
040708
EC46
040708
EC46
040708
EC46
040708
EC50
040709
EC50
040709
EC52
040710
EC54
040711
EC54
040711
EC56
040712
EC56
040712
S-2000
Max Rpm
LER
(Grease)
UNISPHERE II
Dynamic
Capacity
(C), lbs.
IMPERIAL
Complete
Housing
Bearing
Pillow Block
W/ Stab Ring
Part No.
Part No.
Part No.
H2S-517-USAF
BRG22217KC3
035771
044010
422986
3
H4S-517-USAF
BRG22217KC3
035781
044013
422986
H2S-518-USAF
BRG22218KC3
035772
044199
422987
3-3/16
H4S-518-USAF
BRG22218KC3
035782
044114
422987
H2S-520-USAF
BRG22220KC3
035773
044020
422988
3-7/16
H4S-520-USAF
BRG22220KC3
035783
044023
422988
H2S-520-USAF
BRG22220KC3
035774
044020
422988
3-1/2
H4S-520-USAF
BRG22220KC3
035784
044023
422988
H4S-522-USAF
BRG22222KC3
3-15/16
035785
044025
422989
H4S-522-USAF
BRG22222KC3
4
035786
044025
422989
H4S-524-USAF
BRG22224KC3
4-3/16
035787
044202
422990
H4S-526-USAF
BRG22226KC3
4-7/16
035788
044031
422991
H4S-526-USAF
BRG22226KC3
4-1/2
035789
044031
422991
H4S-528-USAF
BRG22228KC3
4-15/16
035790
044034
422992
H4S-528-USAF
BRG22228KC3
5
035791
044034
422992
UNIFIED SAF
Shaft
Dia
S-1
Specialty Tapered
Products
E-Family Roller
Bearings
USAF 500 Air Handling Pillow Blocks with LER Seals
Bearing Reference
Guide
DODGE USAF Air Handling Bearing Assemblies Using 12XX
Series Self Aligning Double Row Ball Bearing
Housing Part No.
Bearing
E-Family Roller
Bearings
Specialty Tapered
Products
Shaft
Size
Housing
Series
2-Bolt
4-Bolt
Part No.
Description
SNW
Part
No.
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-3/16
3-7/16
3-15/16
509
510
511
513
515
516
517
518
520
522
043995
043996
043997
043998
044000
044198
044010
044199
044020
---
------039669
044003
044007
044013
044114
044023
044025
052637
052638
052639
052640
052641
052642
052643
052570
052644
051841
1209K.C3
1210K.C3
1211K.C3
1213K.C3
1215K.C3
1216K.C3
1217K.C3
1218K.C3
1220K.C3
1222K.C3
046350
046351
046352
046353
046354
046356
046358
046360
046361
046363
Stab Ring For Fixed Units

Seal Part No.
# LER
Description
Qty Req
Part No.
(2-Req)
042193
042199 *
042512
042513
042514
042516
042518
042520
042521
042523
SR-9-0
SR-10-8
SR-11-9
SR-13
SR-15-0
SR-1516
SR-1517
SR-1518
SR-1520
SR-1522
1
1
1
2
2
2
2
2
2
2
S-2000
Standard AH housings come with stabilizing ring for fixing spherical roller bearings.
With the use of the 12xx series ball bearings, if a fixed bearing is required, special stabilizing rings are needed.
Remove standard stab ring, which comes with housing, and replace with the above ball bearing stab rings.
The 4-3/16 unit is not available as fixed unit due to non-standard stab ring width. (2) special width.503-.057 would be needed.
In cases where two stab rings are needed, one should be placed on each side of the bearing.
* DODGE USAF Air Handling Bearing Assemblies use the USAF 500 Series Housings. See Page B15-36 - B15-39 for dimensions
STABILIZING RING DIMENSIONS

Stab Ring
UNISPHERE II
O.D.
3.31
3.51
3.9
4.68
5.08
5.47
5.87
6.26
7.04
7.83
Width
.382-.386
.382-.386
.382-.386
.311-.315
.236-.232
.326-.330
.346-.350
.386-.390
.425-.429
.484-.488
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-52
SELECTION
PAGE B15-13
058902
058903
058699
042316
058904
058905
058906
058907
058908
058909
Bearing Reference
Guide
Bearing
Series
107
111
115
203
207
211
215
303
307
315
403
1209
1210
1211
1213
1215
1216
1217
1218
1220
1222
1224
0.21
0.20
0.19
0.18
0.17
0.16
0.17
0.17
0.18
0.17
0.20
FA/FR e
FA/FR > e
Dynamic
Capacity
C
Static
Capacity
CO
3.0
3.2
3.3
3.6
3.6
3.9
3.7
3.7
3.6
3.6
3.11
4.7
4.9
5.1
5.5
5.6
6.0
5.8
5.8
5.5
5.6
4.81
4900
5100
6000
6950
8800
9000
11000
12900
15600
19600
27000
1660
1830
2240
2800
3450
3800
4550
5300
6700
8650
11800
Maximum RPM
Grease
7500
7000
6300
5300
4800
4300
4000
3800
3200
2800
2800
Oil
9000
8500
7500
6300
5600
5000
4800
4500
3800
3400
3400
L10 =
( )
C
P
16667
RPM
UNISPHERE II
NOTE:
Peq = FR + YFA when FA / FR e
Peq = 0.65 FR + YFA when FA / FR > e
S-2000
Shaft
Size
Specialty Tapered
Products
E-Family Roller
Bearings
DODGE USAF Air Handling 1200 Series Self-Aligning Ball Bearing
NOTE: For more information, see Page B15-36 thru B15-39

Bearing
No
107
111
115
203
207
211
215
303
307
315
403
509
510
511
513
515
516
517
518
520
522
524
1209K.C3
1210K.C3
1211K.C3
1213K.C3
1215K.C3
1216K.C3
1217K.C3
1218K.C3
1220K.C3
1222K.C3
1224K.C3
FEATURES/BENEFITS
PAGE B15-3
A
Inch
1.7717
1.9685
2.1654
2.5591
2.9528
3.1496
3.3465
3.5433
3.9370
4.3307
4.7244
B
(mm)
45
50
55
65
75
80
85
90
100
110
120
Inch
3.3465
3.5433
3.9370
4.7244
5.1181
5.5118
5.9055
6.2992
7.0866
7.8740
8.4646
C
(mm)
85
90
100
120
130
140
150
160
180
200
215
Inch
0.7480
0.7874
0.8268
0.9055
0.9843
1.0236
1.1024
1.1811
11.3386
1.4960
1.6535
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-53
R
(mm)
19
20
21
23
25
26
28
30
34
38
42
Inch
0.043
0.043
0.059
0.059
0.059
0.079
0.079
0.079
0.083
0.083
0.083
SELECTION
PAGE B15-13
(mm)
1.1
1.1
1.5
1.5
1.5
2.0
2.0
2.0
2.1
2.1
2.1
IMPERIAL
Housing
UNIFIED SAF
Shaft
Bearing Reference
Guide
How to Order
USAF Smart Stock Selections
Step 1: The Housing Choices
All smart housings feature an embedded thermocouple.
E-Family Roller
Bearings
4B Cast
Close End
Part No.
067503
517
520
522
526
067509
067517
067520
055572
067511
067519
067521
055654
415
528
055734
055906
515
534
057958
055881
615
538
055876
057966
Housing Series
When speed is monitored, select cast-closed end.
207
For temperature and/or vibration monitoring without speed,

both sides open may be selected
215
307
315
407
For speed, as well as temperature and vibration

monitoring, select cast closed end.
Specialty Tapered
Products
515
4B Both
Sides Open
Part No.
067501
Size
Stab rings are included with all housings.
Step 2: The Sensor Choices

AND/OR
For speed monitoring use AC prox

For temperature monitoring, use thermocouple transmitter
USAF Sensor Kits
Part No.
AC Prox
055940
Thermocouple Transmitter
055931
4 - 20 ma Accelerometer and
Thermocouple
067576
S-2000
Step 3: Other Parts You Will Need To Order

If monitoring speed, you will need a special SNW. If you are not monitoring speed, you can use a standard SNW. Special SNWs
feature a modified nut with prox targets
UNISPHERE II
Bearings
IMPERIAL
Size
Bearing
Series
Part No.
Size
207
215
307
315
407
415
515
615
22215K
22217K
22220K
22222K
22226K
22228K
22234K
22238K
422001
422005
422009
422011
422015
422017
422023
422027
207
215
307
315
407
415
515
615
Adapters
Special
SNW
Part No.
055740
055710
055714
055712
055716
055907
055898
067326
Standard
SNW
Part No.
046354
046358
046361
046363
046431
046433
043620
043624
Size
207
215
307
315
407
415
515
615
Seals
Drop-In
TRIPLE-TECT
TRIPLE-TECT
Part No.
Part No.
043542
039538
043546
039530
043549
039859
043551
039861
043554
039864
043556
039866
043560
N/A
043564
N/A
LER
Part No.
Taconite
Part No.
042514
042518
042521
042523
042526
042528
042533
042537
042380
042382
042383
042384
042385
042387
042389
042392
For additional details on DODGE Smart Bearings, see brochure DMR 2026-6
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-54
SELECTION
PAGE B15-13
Select a bearing from the SAF-XT, and SAFS Spherical

Roller Bearing Selection Chart having a radial load rating at
the operating speed equal to or greater than the calculated
Equivalent Radial Load for a desired L10 life. This simple method
is all that is required for the majority of general applications and
provides for occasional average shock loads.
conditions.
For L10 hours life other than those listed in the selection chart,
multiply the Equivalent Radial Load by one of the following
factors. For 20,000 L10 hours life use factor of .88; 40,000, 1.09;
60,000, 1.23; 80,000, 1.34. Then select a bearing from the bold
face (30,000) L10 ratings only in the selection chart having a
rating equal to or greater than this value.
The shaft tolerances recommended (page B15-9) are adequate

for normal radial and radial/thrust load applications. Since the
through the base. Where uplift loads are involved, consult
DODGE Applications Engineering for recommendations. Where
a load pulls the housing away from the mounting base, both the
hold-down bolts and housing must be of adequate strength.
Auxiliary load carrying devices such as shear bars are advisable
for side or end loading of pillow blocks.
To determine the L10 hours life for loads and RPMs not listed,
use the following equation:
L10 Life, Hours =
10/3
( ) (
C
P
16667
RPM
Where:
C = Dynamic Capacity (Table 14 on page B15-76), lbs.
Over2000
C/60
IMPERIAL
201 - 2000
C/40
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-55
SELECTION
PAGE B15-13
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
20-200
C/20
UNISPHERE II

as a guide for general applications that will give adequate
L10 life. Where substantial radial load is also present, it is
advisable to calculate actual L10 life to assure that it meets the
requirements. The maximum thrust load should not exceed
SAF-XT adapter maximum allowable thrust load (Table8 on
page B15-57) nor the pillow block limits shown on page B1558. The effectiveness of the shaft attachment to carry thrust
load depends on proper tightening of the adapter and shaft
deflections.
RPM
Bearing Reference
Guide
* Compare thrust load to adapter maximum allowed thrust load.

If this value is exceeded, auxiliary method of carrying thrust load
is required.
S-2000
DODGE SAF-XT, and SAFS Spherical Roller Bearings have the

capacity to carry heavy radial loads, thrust loads and combined
radial and thrust loads. The maximum recommended load
which can be applied is limited by various components in the
system such as bearing, housing, shaft, shaft attachment,
speed and life requirements as listed in this catalog. DODGE
Spherical Roller Bearings have been applied successfully when
these limits have been exceeded under controlled operating
conditions. Contact DODGE Application Engineering (864-2845700) for applications which exceed the recommendations of
this catalog.
E-Family Roller
Bearings
SAF-XT and SAFS Spherical Roller Bearings
Specialty Tapered
Products
Bearing Reference
Guide
SAF-XT/SAFS Bearings
E-Family Roller
Bearings
When the load on a two row roller bearing is solely a radial load
with no thrust (axial) load, the load is shared equally by both
rows of rollers and the equivalent radial load (P) is equal to the
actual radial load. However, when a thrust load is applied, the
loading on the two rows is shared unequally, depending on the
ratio of thrust to radial load. The use of the X (radial factor) and
Y (thrust factor) from Table 8 converts the actual applied loads
to an equivalent radial load having the same effect on the life of
the bearing as a radial load of this magnitude.
Equation 1
To find X and Y, first calculate FA/FR and compare to e.

Determine X and Y from Table 10: Light thrust FA/FR less than or
equal to e or heavy thrust FA/FR greater than e.
Substitute all known values into the equivalent radial load
equation. P (equivalent radial load) thus determined can be used
in the life formula to determine L10, or it can be compared to the
life desired in the expanded rating table on B15-58 and B15-59.
**NOTE: Spherical bearings require a radial load at least equal
to the thrust load for proper operation FA/FR = 1. If the thrust
load exceeds this limit, consult DODGE Application Engineering.
L10 Life Adjustment - The calculated L10 life obtained from
the above procedure is subject to life adjustment factors in
accordance with ABMA standards. Consult DODGE Application
Engineering for assistance.
Where:
Specialty Tapered
Products
P = Equivalent radial load, lbs

FR = Radial load, lbs.
FA = Thrust (axial) load, lbs. (** See Note below)
e = Thrust load or radial load factor (Table14 )
X = Radial load factor (Table14)
Y = Thrust load factor (Table14)
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-56
SELECTION
PAGE B15-13
Bearing Reference
Guide
SAF-XT/SAFS Bearings
Table 8: Radial and Thrust Factors
X
Adapter.
Dynamic
Max. Allow.
Capacity (C)
Thrust Load
Lbs.
FA (LBS.)
Static
Capacity
Co
Lbs.
Max. Rpm
Grease
Oil
1-15/16
22211K
0.23
1.00
2.90
0.67
4.30
927
31,500
32,500
4500
5600
2-3/16
22213K
0.24
1.00
2.80
0.67
4.20
1359
45,500
47,500
3800
4500
2-7/16, 2-1/2
22215K
0.22
1.00
3.10
0.67
4.60
1568
48,000
53,000
3400
4300
2-11/16, 2-3/4
22216K
0.22
1.00
3.10
0.67
4.60
1780
56,000
60,000
3200
4000
2-15/16, 3
22217K
0.22
1.00
3.00
0.67
4.50
2063
68,000
73,500
3000
3800
3-3/16
22218K
0.23
1.00
2.90
0.67
4.30
2429
78,000
85,000
2600
3400
3000
3-7/16, 3-1/2
22220K
0.24
1.00
2.80
0.67
4.20
3102
96,500
106,000
2200
3-15/16, 4
22222K
0.25
1.00
2.70
0.67
4.10
3931
122,000
134,000
2000
2800
4-3/16
22224K
0.25
1.00
2.70
0.67
4.00
4693
143,000
166,000
1900
2400
2200
4-7/16, 4-1/2
22226K
0.26
1.00
2.60
0.67
3.90
5610
170,000
200,000
1800
4-15/16, 5
22228K
0.25
1.00
2.70
0.67
4.00
6419
196,000
236,000
1700
2000
5-3/16
22230K
0.25
1.00
2.70
0.67
4.00
7383
228,000
275,000
1600
1900
1800
5-7/16, 5-1/2
22232K
0.26
1.00
2.60
0.67
3.90
8630
260,000
315,000
1500
5-15/16, 6
22234K
0.26
1.00
2.60
0.67
3.90
9858
300,000
355,000
1300
1700
6-7/16, 6-1/2
22236K
0.25
1.00
2.70
0.67
4.00
10437
305,000
375,000
1300
1600
6-15/16, 7
22238K
0.28
1.00
2.40
0.67
3.60
11786
270,000
415,000
1200
1300
22244K
0.29
1.00
2.30
0.67
3.50
16020
365,000
550,000
950
1000
23048K
0.25
1.00
2.70
0.67
4.10
14887
260,000
490,000
800
1000
23052K
0.26
1.00
2.60
0.67
3.90
18232
340,000
630,000
750
950
23056K
0.25
1.00
2.70
0.67
4.10
20012
345,000
670,000
700
900
7-1/2,
7-15/16, 8
8-7/16, 8-1/2,
8-15/16, 9
9-7/16, 9-1/2
9-15/16, 10,
10-7/16, 10-1/2
For shaft size 1-7/16 through 4-3/16 inclusive TRIPLE-TECT seals will perform like LER seals
when operating above the grease speed limit
If thrust load exceeds adapter maximum allowable thrust load, auxiliary method of carrying
thrust load required.
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-57
SELECTION
PAGE B15-13
UNIFIED SAF
IMPERIAL
Comparing Spherical to Tapered Roller Bearing: The dynamic capacity C

(spherical) and C90 (taper) are not to the same base. To compare basic
dynamic capacities multiply C x .259 and compare to C90. To select and then
compare, use the complete selection procedure for each bearing and then
compare
E-Family Roller
Bearings
FA/FR e
Specialty Tapered
Products
FA/FR e
S-2000
Basic
Bearing
Description
UNISPHERE II
Shaft
Size
Inch
Bearing Reference
Guide
Table 9: Selection Table
Shaft Size
Adapter
Bearing
Mount
Series
(Inches)
E-Family Roller
Bearings
1-15/16
2 -3/16
2-7/16
2-1/2
Specialty Tapered
Products
2-11/16
2-3/4
2-15/16
3
3 -3/16
S-2000
3-7/16
3-1/2
3-15/16
4
4 -3/16
UNISPHERE II
4-7/16
4-1/2
4-15/16
5
5 -3/16
IMPERIAL
5 -7/16
5 -/2
Note:
L10
Life
Hours
50
100
250
10,000 11,355 9,223 7,006

30,000 8,167 6,633 5,039
60,000 6,633 5,388 4,093
10,000 16,401 13,322 10,120
22213 30,000 11,796 9,581 7,279
60,000 9,581 7,783 5,912
10,000 17,302 14,054 10,676
22215 30,000 12,444 10,108 7,679
60,000 10,108 8,210 6,237
10,000 20,186 16,396 12,456
22216 30,000 14,518 11,793 8,958
60,000 11,793 9,579 7,276
10,000 24,512 19,910 15,125
22217 30,000 17,629 14,320 10,878
60,000 14,320 11,631 8,836
10,000 28,116 22,838 17,349
22218 30,000 20,222 16,425 12,478
60,000 16,425 13,342 10,135
10,000 34,785 28,254 21,464
22220 30,000 25,018 20,321 15,437
60,000 20,321 16,506 12,539
10,000 43,977 35,720 27,135
22222 30,000 31,629 25,691 19,516
60,000 25,691 20,868 15,852
10,000 51,547 41,869 31,806
22224 30,000 37,074 30,113 22,876
60,000 30,113 24,460 18,581
10,000 61,279 49,774 37,812
22226 30,000 44,074 35,799 27,195
60,000 35,799 29,078 22,089
10,000 70,652 57,387 43,594
22228 30,000 50,814 41,274 31,354
60,000 41,274 33,525 25,467
10,000 82,187 66,756 50,712
22230 30,000 59,111 48,013 36,473
60,000 48,013 38,998 29,625
10,000 93,722 76,126 57,829
22232 30,000 67,407 54,751 41,592
60,000 54,751 44,472 33,783
22211
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
500
750
950
1,300
1,500
1,800
2,000
2,600
3,000
3,200
3,400
4500
5,600
5,691
4,093
3,325
8,220
5,912
4,802
8,672
6,237
5,066
10,117
7,276
5,910
12,285
8,836
7,177
14,092
10,135
8,232
17,434
12,539
10,185
22,041
15,852
12,876
25,835
18,581
15,092
30,712
22,089
17,942
35,410
25,467
20,686
41,191
29,625
24,063
46,972
33,783
27,441
5,039
3,624
2,944
7,279
5,235
4,252
7,679
5,523
4,486
8,958
6,443
5,233
10,878
7,824
6,355
12,478
8,974
7,289
15,437
11,103
9,018
19,516
14,037
11,401
22,876
16,453
13,364
27,195
19,559
15,887
31,354
22,551
18,317
36,473
26,232
21,307
41,592
29,914
24,298
4,694
3,376
2,742
6,780
4,877
3,961
7,153
5,145
4,179
8,345
6,002
4,875
10,133
7,288
5,920
11,623
8,360
6,790
14,380
10,343
8,401
18,180
13,076
10,621
21,310
15,326
12,449
25,333
18,220
14,799
29,208
21,007
17,063
33,976
24,436
19,849
38,745
27,866
22,634
4,273
3,073
2,496
6,171
4,439
3,605
6,511
4,683
3,803
7,596
5,463
4,437
9,223
6,634
5,388
10,580
7,609
6,180
13,089
9,414
7,646
16,548
11,901
9,667
19,396
13,950
11,331
23,058
16,584
13,470
26,585
19,120
15,530
30,925
22,242
18,066
35,265
25,364
20,602
4,093
2,944
2,391
5,912
4,252
3,454
6,237
4,486
3,644
7,276
5,233
4,251
8,836
6,355
5,162
10,135
7,289
5,921
12,539
9,018
7,325
15,852
11,401
9,261
18,581
13,364
10,855
22,089
15,887
12,904
25,467
18,317
14,878
29,625
21,307
17,307
33,783
24,298
19,736
3,875
2,787
2,264
5,597
4,026
3,270
5,905
4,247
3,450
6,889
4,955
4,025
8,365
6,017
4,887
9,596
6,901
5,606
11,871
8,538
6,935
15,008
10,794
8,768
17,592
12,652
10,277
20,913
15,041
12,217
24,112
17,342
14,086
28,049
20,173
16,386
31,985
23,004
18,685
3,755
2,700
2,193
5,423
3,901
3,168
5,721
4,115
3,342
6,675
4,801
3,899
8,105
5,829
4,735
9,297
6,687
5,431
11,502
8,273
6,719
14,541
10,459
8,495
17,045
12,259
9,957
20,263
14,573
11,837
23,362
16,802
13,648
27,176
19,545
15,876
3,470
2,496
2,027
5,013
3,605
2,928
5,288
3,803
3,089
6,170
4,437
3,604
7,492
5,388
4,377
8,593
6,180
5,020
10,631
7,646
6,211
13,441
9,667
7,852
3,325
2,391
1,942
4,802
3,454
2,805
5,066
3,644
2,959
5,910
4,251
3,453
7,177
5,162
4,193
8,232
5,921
4,809
10,185
7,325
5,950
3,261
2,345
1,905
4,710
3,388
2,752
4,969
3,574
2,903
5,797
4,169
3,387
7,039
5,063
4,112
8,074
5,807
4,717
3,202
2,303
1,871
4,625
3,327
2,702
4,879
3,509
2,850
5,692
4,094
3,325
6,912
4,971
4,038
7,929
5,703
4,632
2,944
2,117
1,720
4,252
3,058
2,484
2,757
1,983
1,611
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-58
SELECTION
PAGE B15-13
Bearing Reference
Guide
Table 9 (Continued): Selection Table
6 -7/16
6 1/2
22236
6 -15/16
7
22238
7 -3/16
22240
7 -1/2
7 -15/16
8
22244
8- 7/16
8- 15/16
9
23048
9- 7/16
9-1/2
23052
10,000
30,000
60,000
10,000
30,000
60,000
10,000
30,000
60,000
10,000
30,000
60,000
10,000
30,000
60,000
10,000
30,000
60,000
10,000
30,000
60,000
10,000
30,000
50
100
108,140 87,837
77,777 63,175
63,175 51,314
109,943 89,301
79,073 64,227
64,227 52,169
97,326 79,053
69,999 56,857
56,857 46,182
108,140 87,837
77,777 63,175
63,175 51,314
131,571 106,869
94,629 76,862
76,862 62,432
93,722 76,126
67,407 54,751
54,751 44,472
122,559 99,549
88,147 71,598
71,598 58,155
124,361 101,013
89,444 72,651
250
500
750
950
1,300
1,500
66,726
47,991
38,981
67,838
48,791
39,631
60,054
43,192
35,083
66,726
47,991
38,981
81,184
58,389
47,427
57,829
41,592
33,783
75,623
54,390
44,178
76,735
55,190
54,199
38,981
31,662
55,102
39,631
32,190
48,779
35,083
28,496
54,199
38,981
31,662
65,942
47,427
38,522
46,972
33,783
27,441
61,425
44,178
35,884
62,328
44,828
47,991
34,516
28,036
48,791
35,092
28,503
43,192
31,065
25,232
47,991
34,516
28,036
58,389
41,995
34,110
41,592
29,914
24,298
54,390
39,118
31,774
55,190
39,694
44,706
32,153
26,117
45,451
32,689
26,552
40,235
28,938
23,505
44,706
32,153
26,117
54,392
39,120
31,775
38,745
27,866
22,634
50,666
36,440
29,599
40,691
29,266
23,771
41,369
29,753
24,167
36,622
26,339
21,394
38,981
28,036
22,772
39,631
28,503
23,152
1,800
2,000
2,600
3,000
3,200
3,400
4500
5,600
E-Family Roller
Bearings
22234
Specialty Tapered
Products
5 -15/16
6
L10
Life
Hours
S-2000
Shaft Size
Adapter
Bearing
Mount
Series
(Inches)
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-59
SELECTION
PAGE B15-13
UNIFIED SAF
IMPERIAL
UNISPHERE II
9 -15/16
10
23056
10 -7/16
60,000 72,651 59,011 44,828 36,412 32,241
10-1/2
Note: Dark Shaded Areas Require Circulating Oil
Bearing Reference
Guide
Pillow Block Housing Permissible Thrust Load*
(lbs Maximum)
Bearing Type
Shaft Size - Inches
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
1-3/16
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16, 2-1/2
2-11/16, 2-3/4
2-15/16, 3
3-3/16
3-7/16, 3-1/2
3-15/16, 4
4-3/16
4-7/16, 4-1/2
4-15/16, 5
5-3/16
5-7/16, 5-1/2
5-15/16, 6
6-7/16, 6-1/2
6-15/16, 7
7-1/2, 7-15/16, 8
8-7/16, 8-1/2, 8-15/16, 9
9-7/16, 9-1/2
9-15/16, 10, 10-7/16, 10-1/2
HSG. No.
507
509
510
511
513
515
516
517
518
520
522
524
526
528
530
532
534
536
538
544
48
52
56
SAF-XT
2-Bolt
4700
4800
4500
6900
6500
6600
5500
-
SAFS
4-Bolt
5600
9300
8700
9000
13400
13300
12500
9700
14700
14800
14000
14400
14200
22800
32000
23000
32000
55000
2-Bolt
2900
3100
2800
4600
4800
4500
6900
6500
6600
5500
-
4-Bolt
5600
9300
8700
9000
13400
13300
12500
9800
14700
14800
14000
14300
14300
22800
32000
23000
32000
59000
UNISPHERE II
1. When utilizing heavy thrust loads on pillow block housings, the installation will require proper mounting procedures.
2. The pillow block base bolts must be of adequate strength (Grade 8) and properly tightened to the mounting structure.
3. The use of stop bars (shear strips) against pillow block mounting base is required.
4. Shaft shoulder, snap rings or thrust collars should be used to locate the inner ring on the shaft.
5. In all cases where thrust loads are large, the L10 Life of the bearing should be checked for proper selection and life requirements.
* Spherical bearings require a radial load at least equal to the thrust load for proper operation FA/FR 1. If the thrust load exceeds this limit, consult DODGE Application
Engineering.
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-60
SELECTION
PAGE B15-13
Bearing Reference
Guide
SAFS Steel Housing Pillow Blocks
Includes: (1) housing with Spacers, (1) Standard Spherical Bearing,

(1) SNW Assembly (SNP above 8) and (2) TRIPLE-TECT Seals unless
otherwise noted.
FEATURES/BENEFITS
PAGE B15-3
7.44
11.25
3.13
4.80
7.63
13.00
3.50
5.61
4.98
7.80
13.00
3.50
44
6.14
5.63
8.00
13.75
3.88
74
6.41
5.81
8.50
15.25
4.38
97
6.86
6.38
8.64
16.50
4.75
120
8.03
7.44
8.89
16.50
4.75
160
8.47
7.88
9.45
18.38
5.13
175
8.09
7.50
10.33
20.13
5.88
220
8.75
8.16
10.69
21.25
6.25
245
9.22
8.63
10.45
22.00
6.25
310
9.91
9.13
11.88
24.75
6.75
345
10.34
9.63
11.39
26.75
7.13
400
10.84
10.13
11.16
28.00
7.50
640
12.09
11.63
13.20
32.75
8.75
TRIPLETECT
LER/ER
Aux.
24
5.16
4.67
32
5.42
35
Sizes not listed will be quoted on application

SAFS 2-Bolt Pillow Block (P2B-SAFS - - -)
SAFS 4-Bolt Pillow Block (P4B-SAFS - - -)
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-61
S-2000
515
515
516
516
517
517
518
520
520
522
522
524
526
526
528
528
530
532
532
534
534
536
536
538
538
544
544
544
A with Seals
Optional
UNISPHERE II
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4
4-3/16
4-7/16
4-1/2
4-15/16
5
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
7-1/2
7-15/16
8
Approx.
Wt. lbs.
Std.
IMPERIAL
Housing
No.
Part Numbers
SAFS 2-Bolt
SAFS 4-Bolt
Complete
Complete
Housing
Housing
Pillow
Pillow
Only
Only
Block
Block
042400
042425
042410
042428
042401
042425
042411
042428
042407
044231
042408
044232
042420
044231
042421
044232
042402
042433
042412
042436
042403
042433
042413
042436
042424
044233
042430
044234
042404
042440
042414
042443
042405
042440
042415
042443
042416
042450
042417
042450
042432
044235
042568
042455
042575
042455
042569
042460
042576
042460
042439
044236
042570
042465
042577
042465
042571
042469
042578
042469
042572
042468
042579
042468
042573
042472
042580
042472
042446
042477
042581
042477
042574
042477
SELECTION
PAGE B15-13
UNIFIED SAF
Shaft
Size
Inch
Specialty Tapered
Products
E-Family Roller
Bearings
(22200K/2300K ADAPTER MOUNT BEARING)
Bearing Reference
Guide
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-62
SELECTION
PAGE B15-13
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4
4-3/16
4-7/16
4-1/2
4-15/16
5
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
2-Bolt
4-Bolt
Bearing Reference
Guide
1/2
1.13
1.25
6.44
2.31
2.80
3.25
7.06
1.34
0.13
1.16
0.63
3/4
5/8
1.25
1.50
6.88
2.38
3.17
3.50
8.00
1.47
0.19
1.25
0.63
2.13
3/4
5/8
1.50
7.38
2.47
3.42
3.75
8.25
1.56
0.19
1.38
0.75
11.50
2.13
3/4
5/8
1.25
1.63
7.75
2.75
3.69
4.00
8.25
1.70
0.19
1.47
0.69
11.75
12.75
2.38
7/8
3/4
1.38
1.75
8.75
2.91
3.83
4.50
9.81
1.89
0.19
1.64
0.94
12.88
14.13
2.75
3/4
1.50
2.00
9.63
3.13
4.33
4.94
10.63
2.08
0.19
1.80
1.13
13.25
14.50
2.75
3/4
1.50
1.75
10.25
3.66
4.59
5.25
11.50
2.22
0.19
1.84
1.00
14.50
16.00
3.25
7/8
1.75
2.50
11.56
3.88
4.94
6.00
12.81
2.41
0.19
2.34
1.28
15.63
17.38
3.78
2.00
2.50
12.00
3.69
5.36
6.00
13.56
2.53
0.19
2.03
1.19
16.75
18.50
3.75
2.00
2.50
12.81
4.06
5.77
6.31
14.50
2.69
0.19
2.03
1.19
17.38
19.13
3.75
2.00
2.75
13.69
4.25
5.88
6.69
15.13
2.89
0.19
2.09
1.22
19.38
21.63
4.25
2.00
2.88
14.56
4.63
6.44
7.06
16.81
3.13
0.19
2.19
1.56
21.38
23.13
4.63
2.00
3.00
15.25
4.81
6.80
7.50
17.19
3.08
0.19
2.42
1.09
22.13
23.88
4.50
1-1/4
2.25
3.13
16.13
5.13
7.38
7.88
17.08
3.23
0.19
2.53
1.31
25.13
27.88
5.25
1-1/2
3.00
3.88
19.25
5.75
7.44
8.33
9.50
20.75
3.64
0.19
3.25
1.88
2B
4B
1.88
5/8
10.88
2.13
10.00
11.00
11.25
10.50
11.88
12.63
Min.
Max.
Min.
Max.
8.75
9.50
8.63
9.63
10.13
10.63
9.88
10.25
10.75
10.75
1.13, 2B
1.25, 4B
7-1/2
7-15/16
8
Distance shaft should extend beyond housing centerline of pillow block is closed end style.
Non-expansion bearing offset from centerline. For Expansion Bearing S = 0.
Based on TRIPLE-TECT seals.
IMPERIAL
E-Family Roller
Bearings
Bolt Dia.
Specialty Tapered
Products
2-7/16
Dimension
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-63
SELECTION
PAGE B15-13
UNIFIED SAF
Shaft
Size
Inch
S-2000
UNISPHERE II
Bearing Reference
Guide
SAF-XT Pillow Blocks - 2-Bolt Base
(22200K Adapter Mount Bearings)
E-Family Roller
Bearings
LUBE NOTE:
All Sizes Use
A 1/8-27 NPT
Hydraulic
Grease Fitting
4-Bolt Pillow Block
CL Housing
Specialty Tapered
Products
(22200K Adapter Mount Bearing)

A
S-2000
Shaft
Size
Inch
Complete
Pillow
Block
Desig
SAF-XT
Part
No.
Wt.
1-15/16
22511
042001
2-3/16
22513
042002
042003
29.7
042004
29.6
042005
36.3
042006
36.1
042007
42.3
042008
42.1
042009
52.5
042010
69.5
042011
69.2
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
UNISPHERE II
3-7/16
3-1/2
22515
22516
22517
22518
22520
Optional
Min.
Max.
Bolt
Dia.
F
2.75
7.50
7.75
5/8
0.88
0.94
5.25
1.84
2.30
2.75
5.63
3.13
8.25
9.38
5/8
1.31
1.00
5.94
2.03
2.55
3.00
6.41
11.25
3.13
8.75
9.50
5/8
1.12
1.25
6.44
2.19
2.80
3.25
7.63
13.00
3.50
10.13
10.63
3/4
1.12
1.50
6.88
2.28
3.69
4.86
7.88
13.00
3.50
10.25
10.75
3/4
1.12
1.50
7.38
2.41
5.95
5.44
8.00
13.75
3.88
10.75
11.25
3/4
1.12
1.63
7.75
6.22
5.63
8.50
15.25
4.38
11.88
12.63
7/8
1.38
1.75
8.75
Std.
TRIPLETECT
LER
AUX.
17.3
4.14
3.6.3
5.55
9.63
23.8
4.53
4.00
5.81
11.00
4.91
4.42
7.44
5.23
4.61
5.48
Exp.
Block
Non-Exp.
Block
0.97
0.19
0.30
1.13
0.25
0.39
7.00
1.20
0.16
0.27
3.50
7.94
1.28
0.19
0.38
3.42
3.75
7.94
1.38
0.19
0.38
2.66
3.69
4.00
8.44
1.41
0.30
0.48
2.75
3.83
4.50
9.44
1.53
0.38
0.56
Sizes not listed will be quoted on application.
Furnished unless otherwise specified. Includes (1) Housing with Spacer, (1) Standard Spherical Bearing, (1) SNW
Assembly and (2) TRIPLE-TECT Seals.
Distance shaft should extend beyond housing centerline ( CL )

if pillow block is closed end style.
Dimensions shown with TRIPLE-TECT seals installed.
NOTE: SAF-XT Pillow Blocks use UNIFIED adaptors, seals and bearings. All UNIFIED 500 Series accessories are available for use with SAF-XT except Drop-In TRIPLE-TECT and SPLIT-SPHER which are UNIFIED exclusives.
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-64
S CL of
Housing to
CL of
Bearing
SELECTION
PAGE B15-13
042015
29.7
042016
29.6
042017
36.3
042030
36.1
042019
42.3
042020
42.1
042021
52.5
042022
69.5
042023
69.2
042024
92.9
042025
92.6
042270
101.8
042271
148
042272
147.7
042273
173.9
042274
173.6
042282
215
042283
245
042284
244
042303
300
042304
299
042305
372
042306
371
042307
407
042308
406
042309
626
042370
625
042371
624
8-7/16
042372
408
8-1/2
042373
407
042374
406
042375
405
9-7/16
042377
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4
4-3/16
4-7/16
4-1/2
4-15/16
5
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
7-1/2
7-15/16
8
8-15/16
9-1/2
22515
22516
22517
22518
22520
22522
22524
22526
22528
22530
22532
22534
22536
22538
22544
22544
23048
23052
10-7/16
Bolt
Dia.
F
S CL of Housing
to
CL of Bearing
Min.
Max.
3.13
8.63
9.63
1.88
1/2
1.13
1.25
6.44
2.19
2.80
3.25
7.00
1.20
0.16
0.27
13.00
3.50
9.08
10.88
2.13
5/8
1.25
1.50
6.88
2.28
3.17
3.50
7.94
1.28
0.19
0.38
7.88
13.00
3.50
10.00
11.00
2.13
5/8
1.25
1.50
7.38
2.41
3.42
3.75
7.94
1.38
0.19
0.38
5.44
8.00
13.75
3.88
10.50
11.50
2.13
5/8
1.25
1.63
7.75
2.66
3.69
4.00
8.44
1.41
0.59
0.48
6.22
5.63
8.50
15.25
4.38
11.75
12.75
2.38
3/4
1.38
1.75
8.75
2.75
3.83
4.50
9.44
1.53
0.38
0.56
6.80
6.31
8.64
16.50
4.75
12.88
14.13
2.75
3/4
1.50
2.00
9.63
3.03
4.33
4.94
10.56
1.73
0.38
0.55
6.97
6.38
8.89
16.50
4.75
13.25
14.50
2.75
3/4
1.50
1.75
10.25
3.06
4.59
5.25
10.81
1.81
0.42
0.61
7.41
6.81
9.45
18.38
5.13
14.50
16.00
3.25
7/8
1.75
2.50
11.69
3.28
4.94
6.00
11.63
1.95
0.45
0.64
7.66
7.06
10.33
20.13
5.88
15.63
17.38
3.38
2.00
23.50
12.13
3.41
5.36
6.00
12.44
2.05
0.50
0.69
7.97
7.38
10.64
21.25
6.25
16.75
18.50
3.75
2.00
2.50
12.31
3.56
5.77
6.31
13.56
2.14
0.56
0.75
8.28
7.69
10.45
22.00
6.25
17.38
19.13
3.75
2.00
2.75
13.69
3.72
5.88
6.69
14.19
2.33
0.58
0.77
8.66
7.94
10.70
24.75
6.75
19.63
21.38
4.25
2.00
2.88
14.56
3.84
6.44
7.06
16.31
2.47
0.58
0.78
8.84
8.13
11.39
26.75
7.13
21.38
23.13
4.63
2.00
3.00
15.25
3.94
6.80
7.50
17.88
2.53
0.55
0.75
9.34
8.63
11.47
28.00
7.50
22.13
23.88
4.50
1-1/4
2.25
3.13
16.00
4.19
7.38
7.88
18.31
2.61
0.63
0.81
10.66
9.94
13.20
32.75
8.75
5.25
1-1/2
3.00
3.88
19.25
4.84
7.94
9.50
20.63
2.92
0.72
0.72
25.13
27.88
5.25
1-1/2
3.00
3.88
19.25
4.84
8.33
9.50
20.63
2.92
0.72
0.72
LER
AUX.
4.91
4.42
7.44
11.25
5.23
4.61
7.63
5.48
4.86
5.95
Exp
Non-Exp
10.66
9.94
13.20
32.75
8.75
10.50
9.06
12.58
28.75
8.00
22.50
25.00
5.00
1-1/4
2.75
3.25
17.06
4.41
9.33
8.25
18.31
2.94
0.78
0.78
624
10.36
9.94
13.45
32.75
8.75
25.13
27.89
5.25
1-1/2
3.00
3.88
19.25
4.84
9.98
9.50
20.63
3.22
0.70
0.70
707
13.77
12.50
15.70
32.00
11.25
25.75
27.75
7.25
1-3/4
2.88
4.00
19.88
6.16
10.38
9.50
20.75
3.81
0.88
0.88
Bearing Reference
Guide
Optional
042378
9-15/16
10
422556
E-Family Roller
Bearings
Complete
Part
Pillow
Std.
No.
Wt.
Block
TRIPLEDesig
P4B-SFXT
TECT
SAF-XT
Specialty Tapered
Products
Shaft
Size
Inch
S-2000
SAF-XT Pillow Blocks - 4-Bolt Base

(22200K/23000K Adapter Mount Bearings)
UNISPHERE II
2356
042376
042379
422572
Sizes not listed will be quoted on application.
Distance shaft should extend beyond housing centerline ( CL ) if pillow block is closed end style.
Includes (1) Housing with Spacer, (1) Standard Spherical Bearing, (1) SNW
Assembly (SNP above 8,) and (2) TRIPLE-TECT Seals unless otherwise noted
Dimensions shown with TRIPLE-TECT seals installed.
Made-To-Order - Consult DODGE for delivery
Assembled to order. Consult DODGE for delivery
IMPERIAL
10-1/2
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-65
SELECTION
PAGE B15-13
UNIFIED SAF
NOTE: SAF-XT Pillow Blocks use USAF 500 adaptors, seals, and bearings. Part numbers for these individual components can be found on Pages B15-26 thru B15-39.

All USAF 500 Series accessories are available for use with SAF-XT except Drop-In TRIPLE-TECT seals and SPLIT-SPHER components which are UNIFIED exclusives
Bearing Reference
Guide
SAF-XT Pillow Blocks Housing
E-Family Roller
Bearings
LUBE NOTE:
All Sizes Use
A 1/8-27 NPT
Hydraulic Grease
Fitting
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-66
SELECTION
PAGE B15-13
FEATURES/BENEFITS
PAGE B15-3
Bearing Reference
Guide
511
513
513M
515
515M
Part
Number
-
Approx.
Wt. Ibs
-
042109
046325
22
22
516
042111
30.5
042114
30
517
042116
31.5
042119
32
518
042121
38
042124
40
520
042126
51.5
042129
52
522
042131
68
524
524M
042134
046326
70
526
042137
108
528
042140
143
530
042143
120
532
042146
168
534
042149
220
536
042152
266
538
042155
295
544S
042167
443
544
042158
443
48
042161
308
52
422555
440
56
042164
549
056L
422571
620
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-67
SELECTION
PAGE B15-13
E-Family Roller
Bearings
4-Bolt
Approx.
Wt. (Ibs.)
13.75
18.00
18.00
22.75
22.00
Specialty Tapered
Products
2-Bolt
Part
Number
042100
042103
046323
042106
046324
S-2000
1-15/16
2-3/16
(55,60)
2-7/16, 2-1/2
(65)
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4
4-3/16
(110)
4-7/16
4-1/2
4-15/16
5
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
7-1/2
7-15/16
8
8-7/16, 8-1/2
8-15/16, 9
9-7/16
9-1/2
9-15/16
10
10-7/16
10-1/2
Shaft
Housing
UNISPHERE II
S-1
Size
Inch (mm)
IMPERIAL
SAF-XT Pillow Blocks Housing
UNIFIED SAF
Bearing Reference
Guide
SAF-XT & SAFS Pillow Block Seals
A
E-Family Roller
Bearings
Specialty Tapered
Products
S-1
S-2000
UNISPHERE II
TRIPLE-TECT Seal
AUXILIARY TACONITE Seal

For dusty environments and

low to moderate speeds
IMPERIAL
END COVER Seal
LER SEAL
UNIFIED SAF

as closed-end
FEATURES/BENEFITS
PAGE B15-3

clean environments
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-68
SELECTION
PAGE B15-13
1-15/16
511
12
2-3/16
513
14
2-7/16
515
20
2-1/2
2-11/16
516
24
2-3/4
2-15/16
517
28
3
3-3/16
518
34
3-7/16
520
46
3-1/2
3-15/16
522
50
4
4-3/16
524
52
4-7/16
526
54
4-1/2
4-15/16
528
56
5
5-3/16
530
58
5-7/16
532
60
5-1/2
5-15/16
534
64
6
6-7/16
536
68
6-1/2
6-15/16
538
72
7
7-3/16
540
74
7-1/2
544S
76
7-15/16
544
78
8
8-7/16
8-1/2
048
90
8-15/16
9
9-7/16
052
84
9-1/2
9-15/16
056
92
10
10-7/16
056L
94
10-1/2
FEATURES/BENEFITS
PAGE B15-3
043540
043541
043542
043543
043544
043545
043546
043547
043548
043549
043550
043551
043552
043553
043554
043555
043556
043557
043558
043559
043574
043560
043561
043562
043563
043564
043565
046421
043567
043566
043568
043569
043570
043571
043572
043538
422594
043575
043573
047940
047941
Bearing Reference
Guide
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-69
End
Cover
040702
040703
040704
040704
040705
040705
040706
040706
040707
040708
040708
040709
040709
040710
040711
040711
040712
040712
040713
040714
040714
040681
040681
040682
040682
040683
040683
040691
040684
040685
040685
042368
042368
042368
042368
422606
422606
042369
042369
042397
042397
SELECTION
PAGE B15-13
E-Family Roller
Bearings
TRIPLE-TECT
(TT)
Part Numbers
# Metal
Auxiliary
Labyrinth
Taconite
(LER)
(AUX)
042512
041687
042513
041688
042514
042380
042515
040890
042516
042381
042517
040891
042518
042382
042519
040918
042520
040892
042521
042383
042522
040919
042523
042384
042524
040893
042525
044360
042526
042385
042527
042386
042528
042387
042529
040894
042530
042531
042388
042532
040895
042533
042389
042534
041646
042535
042390
042536
042391
042537
042392
042538
043109
043386
040690
042539
040896
042540
042393
042541*
042394
042542*
040897
042543*
040898
042544*
040899
042545*
040995
042510*
040900
042594*
040901
042511*
041082*
042395
042036*
422573*
042396
Specialty Tapered
Products
Housing
Seal
Group
S-2000
S-1
Shaft Size
(Inch)
UNISPHERE II
500 Seals - Inch
IMPERIAL
SAF-XT & SAFS Pillow Block Seals
UNIFIED SAF
Bearing Reference
Guide
SAF-XT & SAFS 22200K and 23000K Spherical Roller Bearings
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
S-1
Shaft
Size
(Inch)
1-15/16
2-3/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4
4-3/16
4-7/16
4-1/2
4-15/16
5
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
7-3/16
7-1/2
7-15/16
8
8-7/16
8-1/2
8-15/16
9
9-7/16
9-1/2
9-15/16
10
10-7/16
10-1/2
Housing
Bearing No.
Part No.
Approx.
Wt. (lbs)
A
Inch (mm)
B
Inch (mm)
C
Inch (mm)
511
513
22211K
22213K
422123
422124
1.8
3.2
2.1654 (55)
2.5591 (65)
3.9370 (100)
4.7244 (120)
.9843 (25)
1.2205 (31)
515
22215K
422001
3.6
2.9528 (75)
5.1181 (130)
1.2205 (31)
516
22216K
422003
4.4
3.1496 (80)
5.5188 (140)
1.2992 (33)
517
22217K
422005
5.5
3.3465 (85)
5.9055 (150)
1.4173 (36)
518
22218K
422007
7.0
3.5433 (90)
6.2992 (160)
1.5748 (40)
520
22220K
422009
10.4
3.9370 (100)
7.0866 (180)
1.8110 (46)
522
22222K
422011
14.9
4.3307 (110)
7.8740 (200)
2.0866 (53)
524
22224K
422013
18.7
4.7244 (120)
8.4646 (215)
2.2865 (58)
526
22226K
422015
23.4
5.1181 (130)
9.0551 (230)
2.5197 (64)
528
22228K
422017
29.5
5.5118 (140)
9.8425 (250)
2.6772 (68)
530
22230K
422019
37.5
5.9055 (150)
10.6299 (270)
2.8740 (73)
532
22232K
422021
48.1
6.2992 (160)
11.4173 (290)
3.1496 (80)
534
22234K
422023
58.0
6.6929 (170)
12.2047 (310)
3.3858 (86)
536
22236K
422025
60.8
7.0866 (180)
12.5984 (320)
3.3858 (86)
538
22238K
422027
78.9
7.4803 (190)
13.3858 (340)
3.6220 (92)
540
544S
22240K
422064
94.1
7.8740 (200)
14.1732 (360)
3.8583 (98)
22244K
422029
129.0
8.6614 (220)
14.7480 (400)
4.2520 (108)
048
23048K
422031
73.4
9.4488 (240)
14.1732 (360)
3.6220 (92)
052
23052K
422543
106.0
10.2362 (260)
15.7480 (400)
4.0945 (104)
23056K
422030
114.0
11.0236 (280)
16.5354 (430)
4.1732 (106)
544
056
056L
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-70
SELECTION
PAGE B15-13
Bearing Reference
Guide
516
517
518
520
522
524
526
528
530
532
534
536
538
540
544S
544
048
052
056
056L
FEATURES/BENEFITS
PAGE B15-3
Approx Wt.
(Lbs)
0.8
1.6
2.6
2.3
2.6
2.6
3.0
2.5
3.1
4.6
4.4
5.6
5.0
6.5
9.2
8.6
10.0
9.0
12.7
15.9
15.0
17.6
17.0
17.0
18.0
18.0
17.0
30.7
30.2
36.0
34.7
38.0
30.0
28.0
22.0
41.1
40.0
43.7
42.0
30.0
28.0
B15-71
F
Max (in.)
0.58
0.64
M
(in.)
1.85
2.10
3.88
0.69
2.29
4.16
0.69
2.37
4.41
0.72
2.47
4.66
0.80
2.63
5.19
0.83
2.87
5.72
0.86
3.19
6.12
0.92
3.47
6.75
0.95
3.76
7.09
1.02
3.97
7.69
1.08
4.22
8.06
1.14
4.57
8.66
1.23
4.83
9.06
1.27
5.02
9.47
1.30
5.26
9.84
1.36
5.48
11.00
1.42
5.90
11.44
1.73
5.44
12.19
1.80
6.02
13.00
1.89
6.19
NOMENCLATURE
PAGE B15-8
PAGE B15-7
L
(in.)
2.97
3.38
SELECTION
PAGE B15-13
S-2000
515
Part
Number
046352
046353
046354
046355
046356
046357
046358
046359
046360
046361
046362
046363
046364
046430
046431
046432
046433
046434
043618
043619
043634
043620
043621
043622
043623
043624
043625
046545
043627
043626
043628
043629
043630
043631
043632
043585
422538
043586
043633
043580
422567
UNISPHERE II
511
513
SNW/SNP
Number
H311-SNW-115
H313-SNW-203
H315-SNW-207
H315-SMW-208
H316-SNW-211
H316-SNW-212
H317-SNW-215
H317-SNW-300
H318-SNW-303
H320-SNW-307
H320-SNW-308
H322-SNW-315
H322-SNW-400
H3124-SNW-403
H3126-SNW-407
H3126-SNW-408
H3128-SNW-415
H3128-SNW-500
SNW30-503
SNW32-507
SNW32-508
SNW34-515
SNW34-600
SNW36-607
SNW36-608
SNW38-615
SNW38-700
SNW40-703
SNW44-708
SNW44-715
SNW44-800
SNP048-807
SNP048-808
SNP048-815
SNP048-900
SNP052-907
SNP052-908
SNP056-915
SNP056-1000
SNP056-1007
SNP056-1008
IMPERIAL
Housing
UNIFIED SAF
V
Shaft Dia. (In)
1-15/16
2-3/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4
4-3/16
4-7/16
4-1/2
4-15/16
5
5-3/16
5-7/16
5-1/2
5-15/16
6
6-7/16
6-1/2
6-15/16
7
7-3/16
7-1/2
7-15/16
8
8-7/16
8-1/2
8-15/16
9
9-7/16
9-1/2
9-15/16
10
10-7/16
10-1/2
Specialty Tapered
Products
E-Family Roller
Bearings
SAF-XT & SAFS Adaptor Assembly (SNW)
Bearing Reference
Guide
Pillow Block SPLIT-SPHER Roller Bearings
(USAF 500 SERIES)
E-Family Roller
Bearings
DODGE SPLIT-SPHER Roller Bearings have the capacity to

as listed in this catalog. DODGE spherical roller bearings have
been applied successfully even when these limits have been
exceeded under controlled operating conditions. Contact
conditions.
Specialty Tapered
Products
10/3
L10 Life, Hours =
( )
C
P
16667
RPM
RPM
20-200
C/20
201 - 2000
C/40
Over2000
C/60

through the base. Where uplift loads are involved, see
B15-21 for maximum values. Spherical bearings require a
radial load at least equal to the thrust load for proper operation.
It is advisable to calculate actual L10 life to assure adequate
conditions (normally at least 30,000 hours life). Where a load
pulls the housing away from the mounting base, both the holddown bolts and housing must be of adequate strength. Auxiliary
load carrying devices such as shear bars are advisable for side
or end loading of pillow blocks.
Where:
C = Dynamic Capacity (Table11 on page B15-70), lbs.
SHAFT TOLERANCES
S-2000
Shaft Sizes,
Inches
Up to 1-1/2
1-9/16 to 2-1/2
2-5/8 to 4
4-7/16 to 6
(See Equation 1 on page B15-74 for definition of P.)
GENERAL
Tolerance,
Inches
+.000 - .002
+.000 - .003
+.000 - .004
+.000 - .005
* Use the smaller of this value or the maximum allowable thrust load listed in
Table 10.
UNISPHERE II

or severe vibrations, increase the Equivalent Radial Load
up to 50% (according to severity of conditions) to obtain a
NOTE: Polyamide cages may limit bearing operating

temperature.

life. Where substantial radial load is also present, it is advisable
to calculate actual L10 life to assure that the bearing meets the
requirements.
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-72
SELECTION
PAGE B15-13
ALTERNATE METHOD A - SELECTING A BEARING FOR AN

L10 LIFE VALUE NOT SHOWN IN THE EASY SELECTION
CHART.
2. Establish bearing radial load, FR.

3. Establish RPM.

dynamic capacity C is identified in terms of L10, RPM and P.
C=
Using the easy selection Table12 on page B15-75, under the

RPM column find the equivalent load that equals or is slightly
higher than the application radial load multiplied by a 1.1 factor
for the desired life. The shaft size on the far left will be the
minimum shaft size that you can use for your application. If the
desired life is different than the values shown on the chart, use
alternate Method A shown below.

2. Radial load = 4,000 lbs.
3. RPM = 950
At the intersection of the 950 RPM column and the 30,000 hours
L10 life row, the equivalent radial load of 4445 lbs. exceeds the
4400 lbs. (4000 x 1.1) application equivalent radial load for shaft
size 2-7/16 - 2-1/2. A SPLIT-SPHER bearing with shaft size of
2-7/16 - 2-1/2 may be used for this application.
L10 X RPM
16667
0.3
x P
(P = FR X 1.1 = Equivalent Radial Load)

Since the L10, RPM, and FR are known, solve for C. Select from
the dynamic capacity column on Table11 on page B15-74 the
C value equal to or just greater than the C value just calculated.
The bore size on the far left represents the minimum shaft size
the MAX. RPM on Table 10. When selecting an L10 life of less
than 30,000 hours, particular attention must be given to shaft
S-2000
4. Calculate the equivalent radial load.

(P = FR x 1.1# = Equivalent radial load)
(The DODGE program BEST can be used to find
application loads.)
Specialty Tapered
Products
1. Define the desired L10 Life in Hours.
Bearing Reference
Guide
Selecting Bearings - Supporting Radial Loads Only
E-Family Roller
Bearings
The application factor, 1.1, compensates for the gaps and

relief area on either side of the gaps. At no time should FR or
P exceed 20% of the Dynamic Capacity C.
UNISPHERE II
The DODGE Bearing Evaluation and Selection Technique
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-73
SELECTION
PAGE B15-13
UNIFIED SAF
IMPERIAL

bearing loads, fatigue life and operating temperature for
a two bearing shaft system based on user supplied input
parameters. This interactive program is available at www.
ptwizard.com under the Product Section area.
Bearing Reference
Guide
Selecting Bearings Supporting Combination Radial And Thrust Loads
E-Family Roller
Bearings

and Y (thrust factor) from Table 11 on page B15-74 converts the
of this magnitude.
Equation 1
The equivalent radial load P = (XFR + YFA) x 1.1
= Equivalent radial load, lbs
Specialty Tapered
Products
FR = Radial load, lbs
AXIAL EXPANSION CAPABILITY
FA = Thrust (axial) load, lbs (** See Note below)

e
= Thrust load or radial load factor (Table 11)

LOADS
Spherical Roller Bearings generally are not recommended for
pure thrust load applications. They will perform satisfactorily
under very light pure thrust loads. Consult DODGE Application
Engineering (864-284-5700).
Where:
P
on whether FA/FR is equal to or less than e, or FA/FR is greater

than e. Substitute all known values into the equivalent radial
load equation. P (equivalent radial load) can be used in the life
formula to determine L10, or it can be compared to the allowable
equivalent radial load ratings for the speed and hours life
desired in the easy selection chart.
The axial expansion capability of SPLIT-SPHER Pillow Blocks

is the same as the UNIFIED 500 pillow blocks. See Table7 on
page B15-25.

selected bore size. Determine X and Y from Table 10 depending
The application factor, 1.1, compensates for the gaps and

relief area on either side of the gaps. At no time should FR or
P exceed 20% of the Dynamic Capacity C
S-2000
Table 11: SPLIT-SPHER Bearings Radial & Thrust Factor

UNISPHERE II
Shaft
Size
Inches
Replaces
Bearing
Series
FA/FR e
e
FA/FR > e
Y
IMPERIAL
2-3/16
22213K
0.24
1
2.80
2-7/16
22215K
0.24
1
2.80
2-15/16 - 3
22217K
0.22
1
3.10
3-3/16
22218K
0.22
1
2.90
3-7/16
22220K
0.23
1
2.80
3-15/16 - 4
22222K
0.24
1
2.80
4-7/16
22226K
0.25
1
2.70
4-15/16
22228K
0.26
1
2.60
5-7/16
22232K
0.25
1
2.70
5-15/16 - 6
22234K
0.26
1
2.60
* At no time load on a SPLIT-SPHER bearing should exceed 20% of the Dynamic Capacity C.
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
4.20
4.20
4.60
4.60
4.30
4.20
4.00
3.90
4.00
3.90
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-74
Max. Allow.
Thrust Load
FA
Lbs.
1200
1200
1700
1700
1700
3100
3100
3100
5000
5000
Dynamic*
Capacity
(C)
Pounds
35,000
41,500
45,000
52,000
71,000
90,000
132,000
153,000
204,000
232,000
SELECTION
PAGE B15-13
Max.
RPM
(Grease)
2600
2350
2200
2100
1700
1450
1200
1100
1000
950
3-3/16
3-7/16
3-15/16
4
4-7/16
4-15/16
5-7/16
5-15/16
6
250
375
450
800
950
1100
1200
1300
1700
2100
2350
2600
7000
7000
7000
6415
8300
8300
8300
7495
9000
9000
9000
8130
10400
10400
10400
9395
14200
14200
14200
12825
18000
18000
18000
16260
26400
26400
26400
23845
30600
30600
30600
27640
40800
40800
40800
36855
46400
46400
46400
41915
7000
7000
6415
5210
8300
8300
7495
6090
9000
9000
8130
6605
10400
10400
9395
7630
14200
14200
12825
10420
18000
18000
16260
13205
26400
26400
23845
19370
30600
30600
27640
22450
40800
40800
36855
29935
46400
46400
41915
34045
7000
5680
4870
3955
8300
6640
5695
4625
9000
7200
6175
5015
10400
8320
7135
5795
14200
11355
9745
7915
18000
14395
12350
10030
26400
21115
18115
14715
30600
24475
20995
17055
40800
32635
27995
22740
46400
37115
31840
25860
6990
5030
4315
3505
8175
5880
5045
4095
8860
6375
5470
4440
10240
7365
6320
5130
13985
10055
8630
7010
17725
12750
10935
8885
25995
18695
16040
13030
30130
21670
18590
15100
40175
28895
24790
20135
45690
32860
28195
22900
6620
4760
4085
3315
7740
5565
4775
3880
8390
6035
5175
4205
9695
6975
5980
4860
13240
9520
8170
6635
16780
12070
10355
8410
24615
17700
15185
12335
28530
20520
17605
14300
38040
27360
23470
19065
43260
31115
26690
21680
5570
4005
3435
2790
6510
4685
4015
3265
7060
5080
4355
3540
8160
5870
5035
4090
11140
8010
6875
5585
14120
10155
8715
7075
20710
14895
12780
10380
24005
17265
14810
12030
32010
23020
19750
16040
36400
26180
22460
18245
5290
3805
3265
2650
6185
4445
3815
3100
705
4820
4135
3360
7750
5575
4780
3885
10580
7610
6530
5300
13410
9645
8275
6720
19670
14145
12135
9860
22800
16400
14070
11425
30400
21865
18755
15235
34570
24865
21330
17325
5060
3640
3125
2535
5920
4255
3650
2965
6415
4615
3960
3215
7415
5335
4575
3715
10125
7280
6245
5075
12835
9230
7920
6430
18825
13540
11615
9435
21820
15690
13460
10935
4930
3545
3045
2470
5765
4145
3555
2890
6250
4495
3855
3135
7225
5195
4455
3620
9865
7095
6085
4945
12505
8995
7715
6265
18340
13190
11315
9190
4815
3465
2970
2415
5630
4050
3475
2820
6105
4390
3765
3060
7055
5070
4350
3535
9630
6925
5940
4825
12205
8780
7530
6120
4440
3195
2740
2225
5195
3735
3205
2600
5630
4050
3475
2820
6505
4680
4015
3260
8885
6390
5480
4455
4170
3000
2570
2090
4875
3505
3005
2445
5285
3800
3260
2650
6105
4390
3770
3060
4030
2900
2485
2020
4710
3390
2905
2360
3910
2810
2415
1960
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-75
Bearing Reference
Guide
100
S-2000
2-15/16
3
50
UNISPHERE II
2-7/16
IMPERIAL
2-3/16
L10
Life
Hrs.
10000
30000
50000
100000
10000
30000
50000
100000
10000
30000
50000
100000
10000
30000
50000
100000
10000
30000
50000
100000
10000
30000
50000
100000
10000
30000
50000
100000
10000
30000
50000
100000
10000
30000
50000
100000
10000
30000
50000
100000
SELECTION
PAGE B15-13
UNIFIED SAF
Shaft
Size
Inches
E-Family Roller
Bearings
Table 12: Selection Table For SPLIT-SPHER Spherical Roller Bearings
Specialty Tapered
Products
Bearing Reference
Guide
Selecting Lubrication
DODGE SPLIT-SPHER Roller Bearings are lubricated by the user
at installation. DODGE SPLIT-SPHER Roller Bearings can be run
with either grease or oil lubrication.
E-Family Roller
Bearings
personnel. If the RPM is greater than 80% of maximum RPM,

add 4 strokes of a handgun at each re-greasing cycle for bores
up to 2. For bores greater than 2, up to 5, add 8 strokes of
a handgun at each re-greasing cycle. For bores greater than
5, up to 6, add 16 strokes of a handgun at each re-greasing
cycle. For units running above 80% of maximum RPM, running
temperature should be monitored. If a drastic change in running
temperature is noted, DODGE recommends removing the used
grease completely and recharging with fresh grease per the
above instructions. For warning before catastrophic failure, see
DODGE Temperature Monitor Package on page B15-54.
Grease Lubrication:
Specialty Tapered
Products
In order to properly protect the bearing during installation, pack

the bearing insert 100% full of grease immediately after properly
mounting the bearing on the shaft. If the RPM of the application
falls between 20% and 80% of maximum RPM (Table11 on
page B15-74), pack the lower half of the housing one-third to
one-half full. If the RPM of the application is less than 20% of
maximum RPM, pack bearing housing cavity 100% full. If the
RPM exceeds 80% of maximum RPM, do not add grease in the
lower half of the housing nor in the cap.
Select a grease with a viscosity at an operating temperature

which will provide full film lubrication (see Table12). Use a
50F to 100F increase in bearing temperature above ambient,
depending on RPM and load. Use Table 13 on pageB15-76 as
a general guide for re-greasing the bearings. A small amount of
grease at frequent intervals is preferable to a large amount of
grease at infrequent intervals. For special applications involving
high speeds, high loads, or very low speeds, consult DODGE
At each re-greasing cycle, for applications up to 80% of

maximum RPM, slowly add grease until fresh grease is seen
purging at the seals. Re-greasing should be done while running.
Remote re-greasing lines should be added to avoid endangering
Table 13: Viscosity Of Oil In Grease

Viscosity for Loads Up To 18% of
Dyn. Cap.
(SUS @ Oper. Temp.)
3500
3150
2750
2375
2000
1750
1500
1300
1075
900
DN
S-2000
UNISPHERE II
Viscosity for Loads Up To 18% of

Dyn. Cap.
(SUS. @ Oper. Temp.)
625
525
450
400
300
200
150
130
110
100
DN
100
1400
200
1600
300
1800
400
2000
500
3000
600
4000
700
5000
800
6000
900
7000
1000
8000
DN = Bore Diameter (inches) x RPM
For loads above 18% of dynamic capacity, an EP grease with the viscosity selected from above is recommended.
Table 14: Re-Greasing Intervals (Months*)

(Based on 12 Hours per Day, 150-F Max.)
RPM
IMPERIAL
Shaft Size
(inch)
250
500
750
100
1250
1500
2000
1-7/16 - 1-15/16
.50
.50
2-3/16
.50
.25
.25
2-7/16 - 3
.50
.25
3-3/16 - 3-1/2
.50
.50
.25
3-15/16 - 4-7/16
.50
.25
4-15/16 - 5-1/2
.50
.25
5-15/16 - 6
.50
* For continuous operation, 24 hrs./day, reduce the re-greasing intervals by half.

UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-76
SELECTION
PAGE B15-13
2500
2-11/16
2-15/16
3-3/16
3-7/16
3-15/16
4
4 3/16
4-7/16
4-15/16
5-7/16
5-15/16
6
BRG13SS203
043393
BRG13SS203
043393
BRG15SS207
043400
BRG15SS207
043400
BRG16SS211
043401
BRG16SS211
043401
BRG17SS215
043402
BRG17SS215
043402
BRG18SS303
043403
BRG18SS303
043403
BRG20SS307
043404
BRG20SS307
043404
BRG22SS315
043405
BRG22SS400
043406
BRG24SS403
043421
BRG26SS407
043407
BRG28SS415
043408
BRG32SS507
043410
BRG34SS515
043411
BRG34SS600
043412
Max RPM
(Grease)
32,500
2,600
32,500
2,600
39,000
2,350
39,000
2,350
40,500
2,300
40,500
2,300
41,500
2,200
41,500
2,200
47,500
2,000
47,500
2,000
64,000
1,700
64,000
1,700
80,000
1,450
80,000
1,450
102,000
1,300
120,000
1,200
143,000
1,100
190,000
950
216,000
900
216,000
900
Split
LER
Seal
14SS203
043501
14SS203
043501
20SS207
043502
20SS207
043502
24SS211
043504
24SS211
043504
28SS215
043506
28SS215
043506
34SS303
043508
34SS303
043508
46SS307
043509
46SS307
043509
50SS315
043511
50SS400
043512
52SS403
043513
54SS407
043514
56SS415
043516
60SS507
043519
64SS515
043520
64SS600
043521
NOTE: Ratings Per FAG Catalog
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-77
SELECTION
PAGE B15-13
Bearing Reference
Guide
Dynamic
Capacity
(C), lbs.
E-Family Roller
Bearings
Bearing
Part No.
Specialty Tapered
Products
2-7/16
Housing
W/ Stab Ring
Part No.
H2S-513-USAF
043998
H4S-513-USAF
039669
H2S-515-USAF
044000
H4S-515-USAF
044003
H2S-516-USAF
044198
H4S-516-USAF
044007
H2S-517-USAF
044010
H4S-517-USAF
044013
H2S-518-USAF
044199
H4S-518-USAF
044114
H2S-520-USAF
044020
H4S-520-USAF
044023
H4S-522-USAF
044025
H4S-522-USAF
044025
H4S-524-USAF
044202
H4S-526-USAF
044031
H4S-528-USAF
044034
H4S-532-USAF
044040
H4S-534-USAF
044043
H4S-534-USAF
044043
S-2000
2-3/16
Complete
Pillow Block
Part No.
P2B13-SS-203
043958
P4B13-SS-203
046110
P2B15-SS-207
043959
P4B15-SS-207
043964
P2B16-SS-211
043960
P4B16-SS-211
043965
P2B17-SS-215
043961
P4B17-SS-215
043966
P2B18-SS-303
043962
P4B18-SS-303
043967
P2B20-SS-307
043963
P4B20-SS-307
043968
P4B22-SS-315
043969
P4B22-SS-400
043970
P4B24-SS-403
043971
P4B26-SS-407
043972
P4B28-SS-415
043974
P4B32-SS-507
043976
P4B34-SS-515
043977
P4B34-SS-600
043978
UNISPHERE II
Shaft
Dia
S-1
IMPERIAL
USAF 500 SPLIT-SPHER Pillow Block
UNIFIED SAF
Bearing Reference
Guide
USAF 500 SPLIT-SPHER Housing Dimensions
P
30
E-Family Roller
Bearings
DRAIN HOLE SIZE

J
Specialty Tapered
Products
"F" BOLTS
M
Y
H
X
"D" MIN
"D" MAX
B
S-2000
UNISPHERE II
IMPERIAL
CL HSG
E
C
K
(AT CL SHAFT)
A1
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-78
SELECTION
PAGE B15-13
513
515
516
517
518
520
4.64
5.20
5.44
5.39
6.16
6.78
11.00
11.13
12.59
12.59
13.63
15.36
3.13
3.13
3.50
3.50
3.88
4.34
8.13
8.63
9.63
9.88
10.25
11.63
9.50
9.63
11.00
11.00
11.75
13.13
8.13
8.63
9.63
9.88
10.38
11.63
9.50
9.63
11.00
11.00
11.63
13.13
1.88
1.88
2.13
2.13
2.13
2.38
522
7.08
16.50
4.75
12.59
14.50
2.75
526
528
532
8.27
8.77
9.92
18.38
19.69
21.66
5.13
5.88
6.75
14.50
15.63
17.38
16.00
17.38
19.25
3.25
3.38
3.75
534
9.72
24.75
6.75
19.38
21.63
4.25
2-Bolt
S-1
F
Shaft
Housing
H
2-Bolt
4-Bolt
Size
2-3/16
513
5/8
1/2
1.03
2-7/16
515
5/8
1/2
1.25
2-11/16
516
3/4
5/8
1.06
2-15/16
517
3/4
5/8
1.25
3-3/16
518
3/4
5/8
1.44
3-7/16
520
7/8
3/4
1.66
3-15/16
522
3/4
1.78
4
4-7/16
526
7/8
2.06
4-15/16
528
1
2.06
5-7/16
532
1
2.34
5-15/16
534
1
2.88
6
Non-expansion bearing offset from centerline.
5.94
6.44
6.75
7.38
7.75
8.75
2.16
2.31
2.42
2.47
2.84
3.16
3.00
3.25
3.50
3.75
4.00
4.50
6.50
7.06
7.94
8.19
8.66
9.78
9.41
3.30
4.94
10.59
11.53
11.81
13.31
3.75
4.00
4.63
6.00
6.00
6.69
12.41
13.25
14.91
14.56
4.63
7.06
16.81
IMPERIAL
Dowel hole locations for Precision Positioning, see Page B15-126 - B15-127
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-79
SELECTION
PAGE B15-13
UNIFIED SAF
4-Bolt
Bearing Reference
Guide
A1
E-Family Roller
Bearings
Housing
Specialty Tapered
Products
S-1
Shaft
Size
2-3/16
2-7/16
2-11/16
2-15/16
3-3/16
3-7/16
3-15/16
4
4-7/16
4-15/16
5-7/16
5-15/16
6
S-2000
USAF 500 SPLIT-SPHER Housing Dimensions
UNISPHERE II
Bearing Reference
Guide
USAF 500 SPLIT-SPHER Pillow Block Seals
A
E-Family Roller
Bearings
SPLIT Seal
Permits easy installation in

hard-to-reach applications
without removing shaft.
Non-metallic split LER.
S-1
Specialty Tapered
Products
S-1
Shaft
Size
Inch
S-2000
UNISPHERE II
2-3/16
2-7/16
2-11/16
2-15/16
3-3/16
3-7/16
3-15/16
4
4-3/16
4-7/16
4-15/16
5-7/16
5-15/16
6
6-7/16
Housing
Seal
Group
513
515
516
517
518
520
14
20
24
28
34
46
522
50
524
526
528
532
52
54
56
60
534
64
536
68
Seal
Part
Number
043501
043502
043504
043506
043508
043509
043511
043512
043513
043514
043516
043519
043520
043521
043522
A
4.72
4.47
4.72
4.83
5.70
6.19
6.59
7.31
7.50
7.88
9.20
9.13
9.69
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-80
SELECTION
PAGE B15-13
Bearing Reference
Guide
USAF 22200 SPLIT-SPHER Roller Bearings
Housing
513
515
516
517
518
520
522
526
528
532
534
Bearing
Descriptive
No.
22213SS203
22215SS207
22216SS211
22217SS215
22218SS303
22220SS307
22222SS315
22222SS400
22226SS407
22228SS415
22232SS507
22234SS515
22234SS600
Bearing
Part No.
043393
043400
043401
043402
043403
043404
043405
043406
043407
043408
043410
043411
043412
Approx.
Weight
(Lbs)
5.07
5.73
7.12
9.04
10.1
14.2
22.0
22.0
32.2
43.2
69.4
82.2
82.2
B
Inch (mm)
C
Inch (mm)
M
Inch (mm)
D
Inch
R
Inch
4.7244
5.1181
5.5118
5.9055
6.2992
7.0866
(120)
(130)
(140)
(150)
(160)
(180)
1.2205
1.2205
1.2992
1.4173
1.5748
1.811
(31)
(31)
(33)
(36)
(40)
(46)
2.1654
2.3622
2.4409
2.6772
2.7559
2.9921
(55)
(60)
(62)
(68)
(70)
(76)
3.3464
3.4646
3.701
4.0157
4.4094
4.6457
0.06
0.06
0.08
0.08
0.08
0.08
7.874
(200)
2.0866
(53)
3.622
(92)
5.4331
0.08
9.0551
9.8425
11.4173
(230)
(250)
(290)
2.5197
2.6772
3.1496
(64)
(68)
(80)
4.0945
4.3307
4.8819
(104)
(110)
(124)
5.9842
6.6929
7.4016
0.12
0.12
0.12
12.2047
(310)
3.3858
(86)
5.0394
(128)
7.9527
0.12
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-81
SELECTION
PAGE B15-13
UNIFIED SAF
IMPERIAL
Shaft
Dia.
Inch
2-3/16
2-7/16
2-11/16
2-15/16
3-3/16
3-7/16
3-15/16
4
4-7/16
4-15/16
5-7/16
5-15/16
6
UNISPHERE II
S-2000
Specialty Tapered
Products
SHAFT DIA
E-Family Roller
Bearings
Bearing Reference
Guide
USDAF Pillow Block - Spherical Roller Bearings
Table 15: Radial & Thrust Factors For USDAF Spherical Bearings
23000K SERIES
E-Family Roller
Bearings
Specialty Tapered
Products
0.25
0.25
0.25
0.25
0.24
0.24
0.24
1
1
1
1
1
1
1
2.70
2.70
2.70
2.70
2.80
2.80
2.80
0.67
0.67
0.67
0.67
0.67
0.67
0.67
4
4.10
4
4.10
4.20
4.10
4.20
Adapter
Maximum
Allowable
Thrust
Load, lbs.*
23,875
26,114
30,498
32,535
34,598
39,926
42,489
0.33
0.32
0.33
0.34
0.34
0.33
0.32
1
1
1
1
1
1
1
3
3.20
3.10
2.90
2.90
3.10
3.20
19,985
27,571
32,373
37,984
43,568
45,617
49,719
490,000
530,000
600,000
720,000
830,000
850,000
915,000
670
630
600
530
500
480
450
850
800
750
670
630
600
560
2.70
2.70
2.80
2.70
2.70
2.70
25,891
30,511
33,236
38,847
44,890
51,365
560,000
655,000
680,000
780,000
865,000
1,000,000
700
630
600
560
530
480
900
800
750
700
670
600
FA/FR e
Shaft
Size
(in.)
Bearing
Series
10-15/16,11
11-7/16,11-1/2,11-15/16,12
12-7/16,12-1/2
12-15/16,13,13-7/16,13-1/2
13-15/16,14
15
15-3/4
23060K
23064K
23068K
23072K
23076K
23080K
23084K
9-7/16, 9-1/2
10-7/16,10-1/2
10-15/16,11
11-15/16,12
12-7/16,12-1/2
13-7/16,13-1/2
13-15/16,14
23152K
23156K
23160K
23164K
23168K
23172K
23176K
FA/FR > e
Max. RPM
Dynamic
Capacity
(C), lbs.
Grease
Oil
440,000
455,000
530,000
550,000
570,000
680,000
710,000
630
600
560
530
500
450
450
800
750
700
670
630
560
560
23100K SERIES
2
2.10
2.10
2
2
2.10
2.10
0.67
0.67
0.67
0.67
0.67
0.67
0.67
23200K SERIES
S-2000
8-15/16,9
23248K
0.37
1
1.80
0.67
9-7/16,9-1/2
23252K
0.37
1
1.80
0.67
10-7/16,10-1/2
23256K
0.36
1
1.90
0.67
10-7/16,11
23260K
0.37
1
1.80
0.67
11-15/16,12
23264K
0.37
1
1.80
0.67
12-7/16,12-1/2
23268K
0.38
1
1.80
0.67
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-82
SELECTION
PAGE B15-13
Bearing Reference
Guide
USDAF Pillow Block - Spherical Roller Bearings

Table 16: Selection Table For USDAF Spherical Bearings
150
10-15/16, 11
23060K
50,000
80,000
100,000
50,000
80,000
100.000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,00
100,000
97865
84995
79491
101201
87892
82201
117883
102380
95751
122331
106243
99363
126780
110107
102977
151246
131355
122850
157919
137151
128270
79491
69037
64567
82201
71391
66768
95751
83158
77774
99364
86296
80709
102977
89435
83643
122850
106694
99785
128270
111401
104187
70387
61130
57172
72786
63214
59121
84784
73634
68866
87984
76413
71465
91183
79191
74064
108780
94474
88357
113579
98642
92255
11-7/16,11-1/2
11-15/16,12
23064K
12-7/16,12-1/2
23068K
12-15/16,13
13-7/16,13-1/2
23072K
13-15/16, 14
23076K
15
23080K
15-3/4
23084K
9-7/16, 9-1/2
23152K
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
60,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
108992
94658
88529
117883
102380
95751
133452
115902
108397
160143
139082
130076
184609
160331
149949
189058
164194
153562
203515
176750
165306
88529
76886
71908
95751
83158
77774
108397
94142
88046
130076
112970
105655
149949
130229
121797
153562
133367
124732
165306
143566
134270
78390
68080
63672
84784
73634
66866
95982
83359
77962
115178
100031
93554
132775
115314
107847
135975
118092
110446
146373
127123
118892
10-7/16, 10-1/2
23156K
10-15/16, 11
23160K
11-15/16,12
23164K
12-7/16,12-1/2
23168K
13-7/16, 13-1/2
23172K
13-15/16,14
23176K
50,000 124562
80,000 108181
100,000 101176
50,000 145686
9-7/16,9-1/2
23252K 60,000 126526
100,000 116333
50,000 151246
10-7/16,10-1/2 23256K 80,000 131355
100,000 122850
50,000 173488
10-15/16,11
23260K 60,000 150672
100,000 140916
50,000 192394
11-15/16,12
23264K 80,000 167092
100,000 156272
50000
222421
12-7/16 12-1/2 23266K 80,000 193170
100,000 180662
* Oil lubrication to the right of the heavy line.
101176
87870
82180
118333
102771
96117
122850
106694
99785
140916
122384
114459
156272
135721
126933
180662
158903
146743
89588
77806
72768
104780
91001
85108
106780
94474
66357
124777
106367
101350
138374
120176
112395
159970
138932
129936
8-15/16, 9
23248K
FEATURES/BENEFITS
PAGE B15-3
Allowable Equivalent Radial Load Rating (Lbs.) at Various Rpm. *

200
250
300
400
500
550
600
23000K SERIES
64567
60386
57172
52445
49049
47666
46438
56076
52445
49653
45548
42598
41397
40331
52445
49049
46438
42598
39840
38717
37719
66768
62445
59121
54233
50721
49291
48021
57987
54233
51346
47100
44050
42809
41706
54233
50721
46021
44050
41198
40037
39005
77774
72738
68866
63172
59081
57416
55937
67546
63172
59809
54864
51312
49665
48580
63172
59081
55937
51312
47989
46636
45435
80709
75483
71465
65556
61311
59583
58048
70094
65556
62066
56934
53248
51747
50414
65556
61311
56048
53248
49800
48396
47149
83643
78227
74064
67940
63540
61749
60158
72643
67940
64323
59005
55184
53629
52247
67940
63540
60158
55184
51611
50156
48864
99785
93324
88357
81051
75803
73666
86662
81051
76737
70392
65834
63978
81051
75803
71768
65834
61571
59835
104187
97441
92255
84627
79147
76916
90486
84627
80122
73497
66736
66601
84627
79147
74934
68738
64287
62475
23100K SERIES
71908
67252
63672
58407
54625
53086
51718
62451
58407
55299
50726
47442
46104
44916
58407
54625
51718
47442
44370
43119
42008
77774
72738
68866
63172
59081
57416
55937
67546
63172
59809
54864
51312
49865
48580
63172
59061
55937
51312
47989
46636
45435
88046
82345
77962
71515
66885
64999
63325
76467
71515
67709
62110
58089
56451
54997
71515
66885
63325
58089
54327
52796
51436
105655
98814
93554
85818
80262
77999
75989
91760
85818
81251
74532
69706
67741
65996
85818
60262
75989
69706
65193
63355
61723
121797 113910 107847
98930
92524
89916
67599
105779
98930
93664
65919
80356
78091
76079
96930
92524
87599
80356
75153
73034
71152
124732 116655 110446 101313
94753
92062
89710
108326 101313
95921
87990
62292
79972
77912
101313
94753
69710
82292
76964
74794
72667
134270 125576 118892 109061 101999
99124
116612 109061 103256
94718
88585
86086
109061 101999
96570
88585
82649
80514
23200K SERIES
82180
76859
72768
66751
62429
60669
59106
71373
66751
63198
57973
54219
52691
51333
66751
62429
59106
54219
50708
49279
48009
96117
89893
85108
78071
73016
70958
69129
83476
78071
73915
67804
63413
61626
60036
76071
73016
69129
63413
59307
57635
56150
99765
93324
86357
81051
75603
73666
71768
86662
81051
76737
70392
65834
63978
62330
81051
75803
71768
65634
61571
59635
58294
114459 107048 101350
92970
66950
84499
62322
99407
92970
68021
80743
75515
73366
71496
92970
86950
62322
75515
70625
68635
66666
126933 118714 112395 103101
96425
93707
91293
110240 103101
97614
69542
83744
81364
79267
103101
96425
91293
63744
78322
76114
74153
146743 137241 129936 119192 111474 108332 105541
127445 119192 112848 103517
96614
94085
91681
119192 111474 105541
96614
90545
67993
65726
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-83
650
700
750
45336
39374
36824
46882
40716
38080
54609
47428
44357
56670
49217
46031
44339
38508
36015
45851
39821
37243
53409
46385
43381
43431
37719
35277
44912
39005
36480
50491
43851
41011
54609
47426
44357
61822
53692
50215
74186
64430
60258
49381
42886
40110
53409
46385
43381
60463
52511
49111
48369
42008
39288
52315
45435
42493
59224
51436
46105
57704
50115
46870
67469
58613
54816
70065
60651
56910
80369
69799
65280
89127
77406
72393
56435
49013
45839
66005
57325
53613
66524
59513
55659
76602
66265
63844
55279
48009
44900
64653
56150
52515
67121
58294
54519
Specialty Tapered
Products
100
S-2000
50
UNISPHERE II
L10 Life
Hours
SELECTION
PAGE B15-13
IMPERIAL
Bearing
Series
UNIFIED SAF
Shaft
Size
E-Family Roller
Bearings
Bearing Reference
Guide
USDAF Adapter Mount Pillow Block
Shaft
Dia
Housing
Open
Housing
Part No.**
Closed
Housing
Part No.**
Dynamic
Bearing
Capacity
Part No.
(C), lbs.
Max
RPM
LER
(Grease)
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
H4S-USDAF-3248 CH4S-USDAF-3248 23248K

560,000
037464
037465
422511
9
3248
560,000
037464
037465
422511
3152
490,000
037461
037462
421294
9-7/16
3252
665,000
037442
037443
421290
3152
490,000
037461
037462
421294
9-1/2
3252
655,000
037442
037443
421290
3156
530,000
037432
037433
421285
10-7/16
3256
680,000
037444
037446
421291
3156
530,000
037432
037433
421285
10-1/2
3256
680,000
037444
037446
421291
H4S-USDAF-060
CH4S-USDAF-060
23060K
060
440,000
422580
037426
422582
H4S-USDAF-3160 CH4S-USDAF-3160 23160K 600,000
10-15/16 3160
037434
037435
421286
3260
780,000
037447
037448
421292
H4S-USDAF-060
CH4S-USDAF-060
23060K
060
440,000
422580
037426
422582
3160
600,000
11
037434
037435
421286
3260
780,000
037447
037448
421292
H4S-USDAF-064
CH4S-USDAF-064
23064K
11-7/16
064
455,000
422502
037427
422531
H4S-USDAF-064
CH4S-USDAF-064
23064K
11-1/2
064
455,000
422502
037427
422531
H4S-USDAF-064L CH4S-USDAF-064L 23064K
064L
455,000
422529
037428
422531
720,000
11-15/16 3164
037436
037437
421287
3264
865,000
037449
037450
422844
8-15/16
3248
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
700
700
670
630
670
630
630
600
630
600
630
600
560
630
600
560
600
600
600
530
530
SNP
Part No.
TRIPLETECT
Part No.
# LER
Part No.
Aux
Part No.
H3248-SNP-815
047628
H3248-SNP-900
047629
H3152-SNP-907
047630
H3252-SNP-907
047646
H3152-SNP-908
047631
H3252-SNP-908
047647
H3156SNP-1007
045431
H325-SNP-1007
047648
H3156-SNP-1008
047637
H3256-SNP-1008
047649
H3060-SNP-1015
043581
H3160-SNP-1015
047638
H3260-SNP-1015
047678
H3060-SNP-1100
422576
H3160-SNP-1100
045464
H3260-SNP-1100
047679
H3064-SNP-1107
043582
H3064-SNP-1108
043583
H3064L-SNP-1115
043584
H3164-SNP-115
047639
H3264-SNP-1115
047680
90TT815
*043571
90TT900
043572
84TT908
043538
84TT907
043538
84TT908
422545
84TT908
422545
94TT1007
047940
94TT1007
047940
94TT1008
047941
94TT1008
047941
96TT1015
047942
96TT1015
047942
96TT1015
047942
96TT1100
047943
96TT1100
047943
96TT1100
047943
98TT1107
047944
98TT1108
047945
100TT1115
047946
100TT1115
047946
100TT115
047946
90LER815
042544
90LER900
*042545
84LER907
*042510
84LER907
*042510
84LER908
*422594
84LER908
*422594
94LER1007
*042036
94LER1007
*042036
94LER1008
*422573
94LER1008
*422573
96LER1015
*042037
96LER1015
*042037
96LER1015
*042037
96LER1100
*422588
96LER1100
*422588
96LER1100
*422588
98LER1107
*042038
98ER1108
*042039
1OOER1115
*042040
100ER1115
*042040
100ER1115
*042040
90AUX815
040899
90AUX900
040995
84AUX907
040900
84AUX907
040900
84AUX908
040901
84AUX908
040901
94AUX1007
045778
94AUX1007
045778
94AUX1008
042396
94AUX1008
042396
96AUX1015
045781
96AUX1015
045781
96AUX1015
045781
96AUX1100
044440
96AUX1100
044440
96AUX1100
044440
98AUX1107
045784
98AUX1107
045787
100AUX1115
045790
100AUX1115
045790
100AUX1115
045790
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-84
SELECTION
PAGE B15-13
Max
RPM
LER
(Grease)

455,000
422529
037428
422531
12
3164
720,000
037436
037437
421287
3264
865,000
037449
037450
422844
H4S-USDAF-068
CH4S-USDAF-068 23068K
068
530,000
035183
035185
421282
12-7/16
3168
830,000
035945
035946
052081
3268
1,000,000
037451
037452
421293
H4S-USDAF-068
068
530,000
035183
035185
421282
12-1/2
3168
830,000
035945
035946
052081
3268
1,000,000
037451
037452
421293
H4S-USDAF-072
12-15/16
072
550,000
044164
037429
422036
H4S-USDAF-072
13
072
550,000
044164
037429
422036
072L
550,000
044165
037430
422036
13-7/16
3172
850,000
037438
037439
421288
H4S-USDAF-072L CH4S-USDAF-072L 23072
072L
550,000
044165
037430
422036
13-1/2
3172
850,000
037438
037439
421288
H4S-USDAF-076
076
570,000
044166
037431
422054
13-15/16
3176
915,000
037440
037441
421289
H4S-USDAF-076
076
570,000
044166
037431
422054
14
3176
915,000
037440
037441
421289
H4S-USDAF-080
15
080
680,000
035417
035418
421283
H4S-USDAF-084
84
710,000
15-3/4
035943
035944
421284
064L
FEATURES/BENEFITS
PAGE B15-3
600
530
530
560
500
480
560
500
480
530
530
530
480
530
480
500
450
500
450
450
450
SNP
Part No.
TRIPLETECT
Part No.
# LER
Part No.
Aux
Part No.
H3064L-SNP-1200
422525
H3164-SNP-1200
050531
H3264-SNP-1200
422843
H3064-SNP-1207
047632
H3168-SNP-1207
047641
H328-SNP-1207
047681
H3068-SNP-1208
047635
H31680-SNP-1208
047642
H3268-SNP-1208
047682
H3072-SNP-1215
043635
H3072-SNP-1300
043636
H3072L-SNP-1307
043637
H3172-SNP-1307
047643
H3072L-SNP-1308
043638
H3172-SNP-1308
045434
H3076-SNP-1315
043639
H3176-SNP-1315
047644
H3076-SNP-1400
043640
H3176-SNP-1400
047645
H3080-SNP-1500
040830
H3084-SNP-1512
047636
100TT1200
047947
100TT1200
047947
100TT1200
047947
102TT1207
047948
102TT1207
047948
102TT1207
047948
102TT1208
047949
102TT1208
047949
102TT1208
047949
104TT1215
047950
104TT1300
047951
106TT1307
047952
106TT1307
047952
106TT1308
047953
106TT1308
047953
108TT1315
047954
108TT1315
047954
108TT1400
047955
108TT1400
047955
110TT1500
047956
112TT1512
047957
100ER1200
*422535
100ER1200
*422535
100ER1200
*422535
102ER1207
*046498
102ER1207
*046498
102ER1207
*046498
102ER1208
*046499
102ER1208
*046499
102ER1208
*046499
104ER1215
*042090
072ER1300
*042091
106ER1307
*042092
106ER1307
*042092
106ER1308
*042093
106ER1308
*042093
108ER1315
*042094
108ER1315
*042094
108ER1400
*042095
108ER1400
*042095
110ER1500
*050474
112ER1512
*046566
100AUX1200
045793
100AUX1200
045793
100AUX1200
045793
102AUX1207
046567
102AUX1207
046567
102AUX1207
046567
102AUX1208
046568
102AUX1208
046568
102AUX1208
046568
102AUX1215
045796
104AUX1300
045799
106AUX1307
045802
106AUX1307
045802
106AUX1308
045805
106AUX1308
045805
108AUX1315
045808
108AUX1315
045808
108AUX1400
046569
108AUX1400
046569
110AUX1500
046570
112AUX1512
046572
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-85
SELECTION
PAGE B15-13
Bearing Reference
Guide
Dynamic
Bearing
Capacity
Part No.
(C), lbs.
E-Family Roller
Bearings
Closed
Housing
Part No.**
Specialty Tapered
Products
Open
Housing
Part No.**
S-2000
Housing
UNISPHERE II
Shaft
Dia
IMPERIAL
USDAF Adapter Mount Pillow Block
UNIFIED SAF
Bearing Reference
Guide
USDAF Housing Dimensions
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-86
SELECTION
PAGE B15-13
Bearing
Number
3248
23248K
3152
3252
3156
3256
60
3160
23152K
23252K
23156K
23256K
23060K
23160K
F
Base Bolt
Size
4-Reqd
D
A1
14.28
35.00
16.36
15.85
Min
Max
13.75
29.00
30.50
8.75
1-5/8
3.75
38.25
14.75
31.63
34.63
9.00
1-5/8
3.38
39.00
15.25
32.00
34.00
10.00
1-7/8
4.19
23064K
064L
68
23068K
10.25
23.94
12.00
26.50
4.88
0.00
4.63
5.42
5.00
4.58
4.31
5.33
0.00
0.00
0.00
0.19
0.00
4.45
0.19
Total
Exp.
3/8
3/8
3/4
3/4
3/4
3/8
3/4
3/8
3/8
12.00
26.38
4.81
0.19
3/8
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-87
SELECTION
PAGE B15-13
UNIFIED SAF
IMPERIAL
S-1
Bearing
Shaft
Housing
J
K
Number
Size
8-15/16
3248
23248K
9
20.88
6.83
9-7/16
3152
23152K
9-1/2
3252
23252K
10-7/16
3156
23156K
10-1/2
3256
23256K
10-15/16
60
23060K
11
3160
23160K
23.44
7.72
11-7/16
64
11-1/2
23064K
11-15/16
064L
12
12-7/16
68
23068K
24.00
7.47
12-1/2
Housing Width With Drain Plugs
Distance Shaft Should Extend Beyond Housing Centerline If Pillow Block Is Closed End Style
Non-expansion Bearing Offset From Centerline. For Expansion Bearing S = O
Specialty Tapered
Products
64
S-2000
8-15/16
9
9-7/16
9-1/2
10-7/16
10-1/2
10-15/16
11
11-7/16
11-1/2
11-15/16
12
12-7/16
12-1/2
Housing
UNISPHERE II
S-1
Shaft
Size
Bearing Reference
Guide
E-Family Roller
Bearings
Bearing Reference
Guide
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-88
SELECTION
PAGE B15-13
Bearing Reference
Guide
3260
23260K
3164
23164K
072
A1
16.98
41.75
18.31
18.38
F
Base Bolt
Size
4-Reqd
Min
Max
15.75
35.00
36.50
10.25
1-7/8
4.50
43.58
17.75
36.75
38.25
10.75
5.00
46.00
17.13
39.25
40.75
11.00
5.25
23072K
3264
23264K
3168
3268
23168K
23268K
3172
23172K
3176
23176K
080
084
23080K
23084K
S-1
Bearing
J
K
Shaft
Housing
Number
Size
10-15/16
3260
23260K
11
11-15/16
3164
23164K
12
12-15/16
072
25.75
8.16
13
23072K
13-7/16
072L
13-1/2
13-15/16
076
23076K
14
11-15/16
3264
23264K
12
28.00
8.70
12-7/16
3168
23168K
12-1/2
3268
23268K
13-7/16
3172
23172K
13-1/2
13-15/16
29.00
8.75
3176
23176K
14
15
080
23080K
15-3/4
084
23084K
Housing Width With Drain Plugs
Distance Shaft Should Extend Beyond Housing Centerline If Pillow Block Is Closed End Style
Non-expansion Bearing Offset From Centerline. For Expansion Bearing S = O
FEATURES/BENEFITS
PAGE B15-3
12.81
B15-89
Total
Exp.
5.95
0.00
3/4
5.72
0.00
3/4
4.81
0.19
29.13
3/8
3/8
14.00
14.50
31.13
33.17
NOMENCLATURE
PAGE B15-8
PAGE B15-7
5.95
0.19
3/8
6.22
0.00
1/2
6.00
6.66
0.00
0.00
1/2
1/2
6.14
0.00
3/4
6.31
0.00
3/4
5.36
5.39
0.19
0.19
3/8
3/8
SELECTION
PAGE B15-13
S-2000
23076K
UNISPHERE II
076
Specialty Tapered
Products
072L
IMPERIAL
10-15/16
11
11-15/16
12
12-15/16
13
13-7/16
13-1/2
13-15/16
14
11-15/16
12
12-7/16
12-1/2
13-7/16
13-1/2
13-15/16
14
15
15-3/4
Housing
Bearing
Number
UNIFIED SAF
S-1
Shaft
Size
E-Family Roller
Bearings
Bearing Reference
Guide
USDAF Pillow Block Seals
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-90
SELECTION
PAGE B15-13
Bearing Reference
Guide
USDAF Pillow Block Seals - Inch
10-7/16
10-1/2
10-15/16
11
11-15/16
12
12-7/16
12-1/2
* Includes Collar
064L
100
068
102
072
104
072L
106
076
108
080
084
110
112
3152
84
3156
94
3160
96
3164
100
3168
102
3172
106
3176
108
3248
90
3252
84
3256
94
3260
96
3264
100
3268
FEATURES/BENEFITS
PAGE B15-3
102
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-91
ER
AUX*
19.84
19.59
16.53
15.25
19.84
16.09
14.81
17.44
16.23
19.41
20.52
20.77
18.63
17.42
21.97
22.23
13.86
13.44
18.25
15.17
19.64
15.25
19.84
19.59
16.16
20.75
17.36
21.94
16.53
17.44
18.63
E-Family Roller
Bearings
98
045781
044440
045784
045787
045790
045793
046567
046568
045796
045799
045802
045805
045808
046569
046570
046572
040900
040901
045778
042396
045781
044440
045790
045793
046567
046568
045802
045805
045808
046569
040899
040995
040900
040901
045778
042396
045781
044440
045790
045793
046557
046568
TT
Specialty Tapered
Products
064
047942
047943
047944
047945
047946
047947
047948
047949
047950
047951
047952
047953
047954
047955
047956
047957
043538
422545
047940
047941
047942
047943
047946
047947
047948
047949
047952
047953
047954
047955
043571
043572
043538
422545
047940
047941
047942
047943
047946
047947
047948
047949
Auxiliary
(AUX)
S-2000
96
21.71
17.42
21.97
14.78
13.44
18.25
15.48
15.06
19.88
16.53
15.17
19.64
17.44
16.16
20.75
20.50
17.36
21.94
17.36
21.95
18.63
SELECTION
PAGE B15-13
UNISPHERE II
9-7/16
060
TRIPLE-TECT
(TT)
Part Numbers
Metal
Labyrinth
(ER)
042037
422588
042038
042039
042040
422535
046498
046499
042090
042091
042092
042093
042094
042095
050474
046566
042510
422594
042036
422573
042037
422588
042040
422535
046498
046499
042092
042093
042094
042095
042544
042545
042510
422594
042036
422573
042037
422588
042040
422535
046498
046499
IMPERIAL
10-15/16
11
11-7/16
11-1/2
11-15/16
2
12-7/16
12-1/2
12-15/16
13
13-7/16
13-1/2
13-15/16
14
15
15-3/4
9-7/16
9-1/2
10-7/16
10-1/2
10-15/16
11
11-15/16
12
12-7/16
12-1/2
13-7/16
13-1/2
13-15/16
14
8-15/16
9
Housing
Seal
Group
UNIFIED SAF
S-1
Shaft
Size
(Inch)
Bearing Reference
Guide
USDAF 23000, 23100, 23200 Spherical Roller Bearings
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
Housing
Bearing
Number
Part
Number
060
064/064L
068
072/072L
076
080
084
3152
3156
3160
3164
3168
3172
3176
3248
3252
3256
3260
3264
3268
23060K
23064K
23068K
23072K
23076K
23080K
20384K
23152K
23156K
23160K
23164K
23168K
23172K
23176K
23248K
23252K
23256K
23260K
23264K
23268K
422582
422531
421282
422036
422054
421283
421284
421294
421285
421286
421287
052081
421288
421289
422511
421290
421291
421292
422844
421293
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
Approx.
Weight
(lbs)
150
161
218
226
240
309
330
192
205
268
350
440
463
487
225
295
311
405
519
629
A*
inch
(mm)
11.8110(300)
12.5984(320)
13.3858(340)
14.1732(360)
14.9606(380)
15.7480(400)
16.5354(420)
10.2362(260)
11.0236(280)
11.8110(300)
12.5984(320)
13.3858(340)
14.1732(360)
14.9606(380)
9.4488(240)
10.2362(260)
11.0236(280)
11.8110(300)
12.5984(320)
13.3858(340)
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-92
B
inch
(mm)
18.1102(460)
18.8976(480)
20.4724(520)
21.2598(540)
22.0472(560)
23.6220(600)
24.4094(620)
17.3228(440)
18.1102(460)
19.6850(500)
21.2598(540)
22.8346(580)
23.6220(600)
24.4094(620)
17.3228(440)
18.8976(480)
19.6850(500)
21.2598(540)
22.8346(580)
24.4094(620)
C
inch
(mm)
4.6457(118)
4.7638(121)
5.2362(133)
5.2756(134)
5.3150(135)
5.8268(148)
5.9055(150)
5.6693(144)
5.7488(146)
6.2992(160)
6.9291(176)
7.4803(190)
7.5590(192)
7.6378(194)
6.2992(160)
6.8504(174)
6.9291(176)
7.5590(192)
8.1890(208)
8.8189(224)
SELECTION
PAGE B15-13
Bearing Reference
Guide
USDAF SNP Adapter Assembly
23064K
064L
68
23068K
72
23072K
072L
76
23076K
80
84
23080K
23084K
3152
23152K
3156
23156K
3160
23160K
3164
23164K
3168
23168K
3172
23172K
3176
23176K
3248
23248K
3252
23252K
3256
23256K
3260
23260K
3264
23264K
3268
23268K
FEATURES/BENEFITS
PAGE B15-3
SNP3060-1015
SNP3060-1100
SNP3064-1107
SNP3064-1108
SNP3064-1115
SNP3064-1200
SNP3068-1207
SNP3068-1208
SNP3072-1215
SNP3072-1300
SNP3072-1307
SNP3072-1308
SNP3076-1315
SNP3076-1400
SNP3080-1500
SNP3084-1512
SNP3152-907
SNP3152-908
H3156-SNP-1007
H3156-SNP-1008
H3160-SNP-1015
H3160-SNP-1100
H3164-SNP-1115
H3164-SNP-1200
H3168-SNP-1207
H3168-SNP-1208
H3172-SNP-1307
H3172-SNP-1308
H3176-SNP-1315
H3176-SNP-1400
SNP-148-815
SNP-148-900
H3252-SNP-907
H3252-SNP-908
H3256-SNP-1007
H3256-SNP-1008
H3260-SNP-1015
H3260-SNP-1100
H3264-SNP-1115
H3264-SNP-1200
H3268-SNP-1207
H3268-SNP-1208
043581
422576
043582
043583
043584
422525
047632
047635
043635
043636
043637
043638
043639
043640
040830
047636
047630
047631
045431
047637
047638
045464
047639
050531
047641
047642
047643
045434
047644
047645
047628
047629
047646
047647
047648
047649
047678
047679
047680
422843
047681
047682
59.0
56.8
82.7
80.5
65.0
62.5
78.0
75.4
107.7
105.0
86.0
83.2
94.3
91.5
100.0
105.0
44.0
42.0
30.06
28.4
65.0
62.4
74.0
71.0
117.2
113.8
120.0
116.3
125.0
121.1
48.5
46.5
54.5
52.2
59.0
56.4
69.5
65.5
98.0
94.5
132.1
128.2
V
Shaft
Size
(In.)
10-15/16
11
11-7/16
11-1/2
11-15/16
12
12-7/16
12-1/2
12-15/16
13
13-7/16
13-1/2
13-15/16
14
15
15-3/4
9-7/16
9-1/2
10-7/16
10-1/2
10-15/16
11
11-15/16
12
12-7/16
12-1/2
13-7/16
13-1/2
13-15/16
14
8-15/16
9
9-7/16
9-1/2
10-7/16
10-1/2
10-15/16
11
11-15/16
12
12-7/16
12-1/2
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-93
L
(In.)
F
Max
(In.)
M
(In.)
14.19
1.94
6.72
15.01
2.03
6.94
15.76
2.16
7.53
16.51
2.16
7.57
17.76
2.36
7.73
18.51
19.32
2.52
2.52
8.4
8.49
12.19
1.77
7.58
13.01
1.85
7.76
14.19
1.94
8.37
15.01
2.03
9.1
15.76
2.16
9.78
16.51
2.16
9.85
17.76
2.36
10.06
11.44
1.7
8.1
12.19
1.75
8.76
13.01
1.85
8.94
14.19
1.94
9.63
15.01
2.03
10.36
15.76
2.16
11.12
SELECTION
PAGE B15-13
Specialty Tapered
Products
64
Approx
Weight
(Lbs)
S-2000
23060K
Part
Number
UNISPHERE II
60
SNP
Number
IMPERIAL
Housing
Bearing
Number
UNIFIED SAF
E-Family Roller
Bearings
Bearing Reference
Guide
E-Family Roller
Bearings
Specialty Tapered
Products
Table 17: Radial & Thrust Factors For USAF Spherical Bearings
Shaft Size
S-2000
Adapter
Mounted
Inches
Direct
Mount
mm
1-11/16
50
55
60
65
70
75
80
85
100
110
120
130
140
150
160
1-15/16
2-3/16
FA/FR e
UNISPHERE II
Bearing
Series
22310
22311
22312
22313
22314
22315
22316
22317
22320
22322
22324
22326
22328
22330
22332
.36
.36
.35
.34
.34
.34
.34
.33
.34
.33
.33
.33
.34
.33
.37
FA/FR>e
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.9
1.9
1.9
2
2
2
2
2
2
2.1
2.1
2.1
2
2
1.8
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
2.8
2.8
3
3
3
3
3
3
3
3.1
3.1
3.1
3
3
2.7
IMPERIAL
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-3/16
4-7/16
4-15/16
5-3/16
5-7/16
5-15/16
170
22334
.37
1
1.8
0.67
2.7
6
6-15/16
.28
1
2.4
0.67
3.6
190
22338
7
.37
1
1.8
0.67
2.7
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
Adapter
Maximum
Allowable
Thrust
Load
Pound
1348
1672
2104
2782
3128
3438
4920
5934
6959
8152
9628
10923
12298
Dynamic
Capacity
(C)
Pounds
Static
Capacity
( Co )
Lbs.
51,000
60,000
69,500
78,000
86,500
100,000
112,000
122,000
183,000
212,000
240,000
280,000
325,000
365,000
325,000
13755
11786
16910
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-94
Maximum RPM
Grease
Oil
50,000
58,500
69,500
81,500
86,500
102,000
114,000
125,000
208,000
240,000
265,000
310,000
365,000
415,000
365,000
3400
3200
2800
2600
2400
2200
2200
2000
1700
1500
1400
1300
1200
1100
1000
4300
4000
3600
3400
3200
3000
3000
2800
2200
1900
1800
1700
1600
1500
1400
360,000
475,000
950
1300
415,000
570,000
1200
850
1300
1100
SELECTION
PAGE B15-13
P2B610-USAF-111TT H2S-610-USAF BRG22310KC3

42,500
035929
035431
423372
50,000
039404
039760
423102
1-15/16
50,000
039413
039762
423102
65,500
039405
039764
423104
2-3/16
65,500
039414
039766
423104
83,000
039406
039768
423106
2-7/16
83,000
039415
039770
423106
93,000
035930
035432
423373
2-11/16
93,000
035931
035433
423373
102,000
039407
039772
423108
2-15/16
102,000
039416
039774
423108
3-7/16
146,000
039417
039776
423110
4-3/16
204,000
039419
039780
422140
4-7/16
236,000
039420
039781
423114
4-15/16
275,000
039421
039553
422035
5-3/16
310,000
039422
039782
423116
5-7/16
325,000
039423
039783
423118
5-15/16
360,000
039424
039784
423120
6
360,000
039425
039784
423120
6-15/16
415,000
039426
039785
423122
415,000
7
039427
039785
423122
1-11/16
FEATURES/BENEFITS
PAGE B15-3
3,400
3,200
3,200
2,600
2,600
2,200
2,200
2,200
2,200
2,000
2,000
1,700
1,400
1,300
1,200
1,100
1,000
950
950
850
850
SNW
Part No.
TRIPLETECT
Part No.
H2310-SNW-111
046680
H2311-SNW-115
046551
H2311-SNW-115
046551
H2313-SNW-203
046552
H2313-SNW-203
046552
H2315-SNW-207
046553
H2315-SNW-207
046553
H2316-SNW-211
046682
H2316-SNW-211
046682
H2317-SNW-215
046554
H2317-SNW-215
046554
H2320-SNW-307
046555
H2324-SNW-403
046557
H2326-SNW-407
046558
H2328-SNW-415
046559
H2330-SNW-503
046560
H2332-SNW-507
046561
H2332-SNW-515
046562
H2334-SNW-600
046563
H2338-SNW-615
046564
H2338-SNW-700
046565
10TT111
043579
12TT115
043540
12TT115
043540
14TT203
043541
14TT203
043541
20TT207
043542
20TT207
043542
24TT211
043544
24TT211
043544
28TT215
043546
28TT215
043546
46TT307
043549
52TT403
043553
54TT407
043554
56TT415
043556
58TT503
043558
60TT507
043559
64TT515
043560
64TT600
043561
72TT615
043564
72TT700
043565
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-95
TTDN
Part No.
--12TTDN115
039582
12TTDN115
039582
14TTDN203
039583
14TTDN203
039583
20TTDN207
039538
20TTDN207
039538
24TTDN211
039855
24TTDN211
039855
28TTDN215
039530
28TTDN215
039530
46TTDN307
039859
52TTDN403
039863
54TTDN407
039864
56TTDN415
039866
-------------
# LER
Part No.
End
Cover
10LER111
* 042199
12LER115
042512
12LER115
042512
14LER203
042513
14LER203
042513
20LER207
042514
20LER207
042514
24LER211
042516
24LER211
042516
28LER215
042518
28LER215
042518
46LER307
042521
52LER403
042525
54LER407
042526
56LER415
042528
58LER503
042530
60LER507
042531
64LER515
042533
64LER600
042534
72LER615
042537
72LER700
042538
EC10
040701
EC12
040702
EC12
040702
EC14
040703
EC14
040703
EC20
040704
EC20
040704
EC24
040705
EC24
040705
EC28
040706
EC28
040706
EC46
040708
EC52
040710
EC54
040711
EC56
040712
EC58
040713
EC60
040714
EC64
040681
EC64
040681
EC72
040683
EC72
040683
SELECTION
PAGE B15-13
Bearing Reference
Guide
Dynamic Max
Capacity RPM
(C), lbs. (Grease)
E-Family Roller
Bearings
Bearing
Part No.
Specialty Tapered
Products
Housing
W/ Stab Ring
Part No.
S-2000
Complete
Pillow Block
Part #
UNISPHERE II
Shaft
Dia
S-1
IMPERIAL
UNIFIED SAF
Bearing Reference
Guide
USAF 600 Housing Dimensions - Inch
P
30
E-Family Roller
Bearings
DRAIN HOLE SIZE

J
Specialty Tapered
Products
"F" BOLTS
M
Y
H
X
"D" MIN
"D" MAX
S-2000
EXP
UNISPHERE II
S-1
NON-EXP
IMPERIAL
CL HSG
E
C
W
STATIC
OIL
LEVEL
CL HSG
S
K
(AT CL SHAFT)
UNIFIED SAF
A1
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-96
SELECTION
PAGE B15-13
S-1
Shaft
Size
610
611
613
615
616
617
620
624
626
628
630
632
4.70
4.64
5.44
6.16
6.38
6.78
8.05
9.36
9.92
9.91
10.41
10.81
10.63
11.00
12.59
13.63
14.17
15.36
16.50
20.88
21.66
24.75
26.75
28.00
2.75
3.38
3.50
3.88
3.88
4.34
4.72
6.25
6.25
6.75
7.13
7.50
Min
7.75
8.13
9.63
10.25
10.88
11.63
-
Max
9.00
9.50
11.00
11.75
12.38
13.13
-
Min
8.13
9.63
10.38
10.63
11.63
13.25
16.75
17.38
19.38
20.88
21.63
Max
9.50
11.00
11.63
12.50
13.13
14.50
18.25
19.25
21.63
23.63
24.38
1.88
2.13
2.13
2.13
2.38
2.75
3.75
3.75
4.25
4.63
4.50
634
11.53
28.75
8.00
22.50
25.00
5.00
1-1/4
638
12.30
32.75
8.88
24.75
27.88
5.25
1-1/2
Housing
2-Bolt
1-11/16
610
1.41
5.72
2.20
3.00
6.13
1-15/16
611
1.28
6.19
2.16
3.25
6.50
2-3/16
613
1.06
6.75
2.42
3.50
7.44
2-7/16
615
1.44
7.75
2.84
4.00
8.66
2-11/16
616
1.22
8.25
2.95
4.25
9.03
2-15/16
617
1.66
8.75
3.16
4.50
9.78
3-7/16
620
1.50
10.25
3.64
5.25
11.25
4-3/16
624
2.38
12.50
4.33
6.31
14.94
4-7/16
626
2.34
13.31
4.63
6.69
14.91
4-15/16
628
2.88
14.56
4.63
7.06
16.81
5-3/16
630
3.00
15.13
4.88
7.50
17.19
5-7/16
632
3.13
15.81
5.26
7.88
18.00
5-15/16
634
3.38
16.63
5.44
8.25
19.00
6
6-15/16
638
3.75
18.88
5.81
9.50
21.25
7
Non-expansion bearing offset from centerline. For expansion bearing S = 0.
FEATURES/BENEFITS
PAGE B15-3
4-Bolt
W
Static
Oil Level
Drain
Hole
Size
1.38
1.44
1.41
1.59
1.69
1.75
2.03
2.38
2.44
2.56
2.63
2.69
1.53
1.66
1.97
2.25
2.38
2.63
3.19
3.59
4.03
4.16
4.22
4.75
0.98
1.03
0.95
1.13
1.17
1.25
1.38
1.33
1.33
1.33
1.63
1.61
1/8-27NPSI
1/8-27NPSI
1/4-18NPSF
3/8-18NPSF
3/8-18NPSF
3/8-18NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
0.19
2.75
4.91
1.53
1/2-14NPSF
0.19
3.38
5.44
2.03
1/2-14NPSF
1.38
1.42
1.98
1.77
1.83
1.91
2.30
2.64
2.84
3.09
3.27
3.44
0.22
0.13
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
3.59
3.89
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-97
Bearing Reference
Guide
E-Family Roller
Bearings
Specialty Tapered
Products
F
Bolt Dia.
2-Bolt
4-Bolt
5/8
5/8
1/2
3/4
5/8
3/4
5/8
3/4
5/8
7/8
3/4
3/4
1
1
1
1
1-1/4
A1
IMPERIAL
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
4-3/16
4-7/16
4-15/16
5-3/16
5-7/16
5-15/16
6
6-15/16
7
Housing
SELECTION
PAGE B15-13
UNIFIED SAF
S1
Shaft
Size
S-2000
UNISPHERE II
Bearing Reference
Guide
USAF 22300K Spherical Roller Bearings
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
Shaft Size
(Inch)
UNISPHERE II
IMPERIAL
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-3/16
4-7/16
4-15/16
5-3/16
5-7/16
5-15/16
6
6-15/16
7
3.0
3.9
5.1
7.8
11.5
13.1
15.7
28.0
38.8
48.3
59.7
75.4
90.4
113.0
A*
Inch (mm)
1.7717 (45)
1.9685 (50)
2.1654 (55)
2.5591 (65)
2.9528 (75)
3.1496 (80)
3.3465 (85)
3.9370 ((100)
4.3307 (110)
4.7244 (120)
5.1181 (130)
5.5118 (140)
5.9055 (150)
6.2992 (160)
B
Inch (mm)
3.9370 (100)
4.3307 (110)
4.7244 (120)
5.5118 (140)
6.2992 (160)
6.6929 (170)
7.0866 (180)
8.4646 (215)
9.4488 (240)
10.2362 (260)
11.0236 (280)
11.8110 (300)
12.5984 (320)
13.3858 (340)
C
Inch (mm)
1.4171 (36)
1.5748 (40)
1.6929 (43)
1.8898 (48)
2.1654 (55)
2.2835 (58)
2.3622 (60)
2.8740 (73)
3.1496 (80)
3.3858 (86)
3.6614 (93)
4.0157 (102)
4.2520 (108)
4.4882 (114)
423120
132.0
6.6929 (170)
14.1732 (360)
4.7244 (120)
423122
179.0
7.4803 (190)
15.7480 (400)
5.1969 (132)
Housing
Bearing
No.
Part
No.
Approx. Wt
(lbs)
609
610
611
613
615
616
617
620
622
624
626
628
630
632
22309K
22310K
22311K
22313K
22315K
22316K
22317K
22320K
22322K
22324K
22326K
22328K
22330K
22332K
423100
423372
423102
423104
423106
423373
423108
423110
423112
422140
423114
422035
423116
423118
634
22334K
638
22338K
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-98
SELECTION
PAGE B15-13
Bearing Reference
Guide
634
638
FEATURES/BENEFITS
PAGE B15-3
Part
Number
Aprox. Wt
(Lbs)
L
(in)
F Max
(In)
M
(In)
H2309-107
H2310-111
H2311-115
H2313-203
H2315-207
H2316-211
H2317-215
H2320-307
H2322-315
H2324-403
H2326-407
H2328-415
H2330-503
H2332-507
H2334-515
H2334-600
H2338-615
H2338-700
046550
046680
046551
046552
046553
046682
046554
046555
046556
046557
046558
046559
046560
046561
046562
046563
046564
046565
0.63
0.80
0.86
1.50
2.55
3.00
3.20
5.30
5.75
7.4
10.7
12.0
15.6
21.7
22.0
21.0
22.9
21.6
2.53
2.69
2.97
3.38
3.88
4.16
4.41
5.19
5.72
6.12
6.75
7.09
7.69
8.06
0.52
0.58
0.58
0.64
0.69
0.69
0.72
0.83
0.86
0.92
0.95
1.02
1.08
1.14
1.97
2.17
2.32
2.56
2.87
3.07
3.23
3.82
4.13
4.41
4.76
5.16
5.47
5.79
8.66
1.23
8.06
9.47
1.30
6.65
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-99
SELECTION
PAGE B15-13
UNISPHERE II
609
610
611
613
615
616
617
620
622
624
626
628
630
632
Adapter
Number
IMPERIAL
Housing
UNIFIED SAF
V
Shaft Dia.
(Inch)
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-3/16
4-7/16
4-15/16
5-3/16
5-7/16
5-15/16
6
6-15/16
7
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
USAF 600 Adapter Assembly (SNW)
Bearing Reference
Guide
USAF 200 Direct Mount Pillow Block with TRIPLE-TECT Seal Assembly
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-100
SELECTION
PAGE B15-13
3-15/16
4-1/8
4-1/2
3-3/16
3-3/8
3-13/16
75
80
85
90
100
4-7/8
4-3/16
110
5-5/16
4-9/16
120
5-7/8
4-15/16
130
6-1/4
5-5/16
140
6-5/8
5-3/4
150
6-1/16
160
7-7/16
6-7/16
170
7-13/16
6-7/8
180
8-3/8
7-1/4
190
8-3/4
7-5/8
200
9-9/16
8-5/16
220
FEATURES/BENEFITS
PAGE B15-3
P2B215-USAF-307TT
039175
P4B215-USAF-307TT
039177
P2B216-USAF-310TT
039179
P4B216-USAF-310TT
039181
P2B217-USAF-315TT
039183
P4B217-USAF-315TT
039185
P2B218-USAF-402TT
039187
P4B218-USAF-402TT
039189
P2B220-USAF-408TT
039191
P4B220-USAF-408TT
039193
P4B222-USAF-414TT
039195
P4B224-USAF-505TT
039197
P4B226-USAF-514TT
039199
P4B228-USAF-604TT
039201
P4B230-USAF-610TT
039203
P4B232-USAF-700TT
039205
P4B234-USAF-707TT
039207
P4B236-USAF-713TT
039209
P4B238-USAF-806TT
039211
P4B240-USAF-812TT
039213
P4B244-USAF-909TT
039215
H2S-215-USAF
039682
H4S-215-USAF
039684
H2S-216-USAF
039686
H4S-216-USAF
039688
H2S-217-USAF
039690
H4S-217-USAF
039692
H2S-218-USAF
039694
H4S-218-USAF
039696
H2S-220-USAF
039698
H4S-220-USAF
039700
H4S-222-USAF
039702
H4S-224-USAF
039704
H4S-226-USAF
039706
H4S-228-USAF
039708
H4S-230-USAF
039710
H4S-232-USAF
039711
H4S-234-USAF
039712
H4S-236-USAF
039713
H4S-238-USAF
039714
H4S-240-USAF
039715
H4S-244-USAF
039716
BRG22215C3
421265
BRG22215C3
421265
BRG22216C3
421266
BRG22216C3
421266
BRG22217C3
421267
BRG22217C3
421267
BRG22218C3
421268
BRG22218C3
421268
BRG22220C3
421269
BRG22220C3
421269
BRG22222C3
421270
BRG22224C3
421271
BRG22226C3
421272
BRG22228C3
421273
BRG22230C3
421274
BRG22232C3
421275
BRG22234C3
421276
BRG22236C3
421277
BRG22238C3
421278
BRG22240C3
421279
BRG22244C3
421280
Dynamic
Capacity
(C), lbs.
Max RPM
(Grease)
48,000
3,400
48,000
3,400
56,000
3,200
56,000
3,200
68,000
3,000
68,000
3,000
78,000
2,600
78,000
2,600
96,500
2,200
96,500
2,200
122,000
2,000
143,000
1,900
170,000
1,800
196,000
1,700
228,000
1,600
260,000
1,500
308,000
1,300
308,000
1,300
270,000
1,200
300,000
900
365,000
950
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-101
Locknut
Part No.
AN15
460901
AN15
460901
AN16
460902
AN16
460902
AN17
460903
AN17
460903
AN18
460904
AN18
460904
AN20
460905
AN20
460905
AN22
460906
AN24
041071
AN26
041064
AN28
041065
AN30
041072
AN32
041066
AN34
041067
AN36
041070
AN38
041068
AN40
040838
AN44
041069
SELECTION
PAGE B15-13
Bearing Reference
Guide
Bearing
Part No.
E-Family Roller
Bearings
3-5/8
2-13/16
Housing
Part No.**
Specialty Tapered
Products
3-7/16
S-3
Complete
Pillow Block
Part #
S-2000
S-2
Bearing
Bore
mm.
UNISPHERE II
Shaft
Dia.
IMPERIAL
USAF 200 Direct Mount Pillow Block with TRIPLE-TECT Seal Assembly
UNIFIED SAF
Bearing Reference
Guide
USAF 200 Direct Mount Pillow Block With TRIPLE-TECT Seal Assembly
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-102
SELECTION
PAGE B15-13
TTDN
Part No.
S2
S3
W15
38TT307
24TT213
419150
046401
046400
3-7/16
2-13/16
75
W15
38TT307
24TT213
419150
046401
046400
W16
38TT310
28TT300
419152
046402
043547
3-5/8
3
80
W16
38TT310
28TT300
419152
046402
043547
W17
42TT315
32TT303
419154
046404
046403
3-15/16
3-3/16
85
W17
42TT315
32TT303
419154
046404
046403
W18
44TT402
36TT306
419156
046406
046405
4-1/8
3-3/8
90
W18
44TT402
36TT306
419156
046406
046405
W20
54TT408
50TT313
419158
043555
046407
4-1/2
3-13/16
100
W20
54TT408
50TT313
419158
043555
046407
W22
56TT414
52TT403
4-7/8
4-3/16
110
419160
046408
043553
W24
58TT510
54TT409
5-5/16
4-9/16
120
419162
046411
046409
W26
62TT514
56TT415
5-7/8
4-18/16
130
419164
046410
043556
W28
66TT604
58TT505
6-1/4
5-5/16
140
419166
046412
046411
W30
70TT610
62TT512
6-5/8
5-3/4
150
419168
046414
046413
W32
72TT700
64TT601
7
6-1/16
160
419170
043565
046415
W34
76TT707
68TT607
7-7/16
6-7/16
170
419172
046416
043562
W36
78TT711
72TT614
7-13/16
6-7/8
180
419174
046417
046418
W38
80TT806
74TT704
8-3/8
7-1/4
190
419176
046420
046419
W40
82TT812
76TT710
8-3/4
7-5/8
200
419171
046423
046422
W44
84TT909
80TT805
9-9/16
8-5/16
220
419178
046425
046424
# LER
Part No.
S2
38TTDN307
039568
38TTDN307
039568
38TTDN310
039291
38TTDN310
039291
42TTDN315
039515
42TTDN315
039515
S3
24TTDN213
039289
24TTDN213
039289
28TTDN300
039857
28TTDN300
039857
32TTDN303
039292
32TTDN303
039292
---
---
---
---
---
---
---
---
56TTDN414
039297
52TTDN403
039863
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
S2
38LER307
*045928
38LER307
045928
38LER310
045931
38LER310
045931
42LER315
042089
42LER315
042089
44LER402
*045936
44LER402
*045936
54LER408
042527
54LER408
042527
56LER414
042098
58LER505
042248
62LER514
042085
66LER604
042249
70LER610
045951
72LER700
042538
76LER707
042049
78LER711
042221
*80LER806
042031
*82LER812
045956
*84LER909
042029
S3
24LER213
*045927
24LER213
045927
28LER300
042519
28LER300
042519
32LER303
042088
32LER303
042088
36LER306
*045934
36LER306
*045934
50LER313
045939
50LER313
045939
52LER403
042525
54LER409
045943
56LER415
042528
58LER505
042248
62LER512
045949
64LER601
045953
68LER607
042535
72LER614
042220
*74LER704
042032
*76LER710
045955
*80LER805
042028
End
Cover
Part No.
EC24
040705
EC24
040705
EC28
040706
EC28
040706
EC32
057260
EC32
057260
---
--EC50
040709
EC50
040709
EC52
040710
EC54
040711
EC56
040712
EC58
040713
--EC64
040681
EC68
040682
EC72
040683
EC74
040691
EC7
040684
---
Bearing Reference
Guide
TRIPLE-TECT
Part No.
E-Family Roller
Bearings
S-3
Lock
washer
Part No.
Specialty Tapered
Products
S-2
Bearing
Bore
mm.
S-2000
Shaft
Dia.
UNISPHERE II
IMPERIAL
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-103
SELECTION
PAGE B15-13
UNIFIED SAF
Bearing Reference
Guide
P
E-Family Roller
Bearings
LUBE NOTE:
All Sizes Use A
Grease Fitting
30
DRAIN HOLE
SIZE
Specialty Tapered
Products
"F" BOLTS
M
Y
H
X
"D" MIN
"D" MAX
S-2000
EXP
UNISPHERE II
S-3
S-2
NON-EXP
IMPERIAL
CL HSG
E
C
CL HSG
W
STATIC
OIL
LEVEL
K
(AT CL SHAFT)
A1
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-104
SELECTION
PAGE B15-13
215
216
217
218
220
222
224
226
228
230
232
234
236
238
240
244
S-2
Shaft
Size
S-3
Shaft
Size
Housing
11.13
12.59
12.59
13.63
15.36
16.50
16.50
18.58
19.69
20.88
21.66
24.75
26.75
28.00
28.75
32.75
3.13
3.50
3.50
3.88
4.34
4.75
4.72
5.13
5.88
6.25
6.25
6.75
7.13
7.50
8.00
8.88
2-Bolt
Min
8.63
9.63
9.88
10.25
11.63
-
FEATURES/BENEFITS
PAGE B15-3
Max
9.68
11.00
11.00
11.75
13.13
-
3-7/16
2-13/16
215
1.25
6.44
2.31
3.25
3-5/8
3
216
1.06
6.75
2.42
3.50
3-15/16
3-3/16
217
1.25
7.38
2.47
3.75
4-1/8
3-3/8
218
1.44
7.75
2.84
4.00
4-1/2
3-13/16
220
1.66
8.75
3.16
4.50
4-7/8
4-3/16
222
1.78
9.41
3.30
4.94
5-5/16
4-9/16
224
1.50
10.25
3.64
5.25
5-7/8
4-15/16
226
2.06
11.53
3.75
6.00
6-1/4
5-5/16
228
2.06
11.81
4.00
6.00
6-5/8
5-3/4
230
2.38
12.50
4.33
6.31
7
6-1/16
232
2.34
13.31
4.63
6.69
7-7/16
6-7/16
234
2.88
14.56
4.63
7.06
7-13/16
6-7/8
236
3.00
15.13
4.88
7.50
8-3/8
7-1/4
238
3.13
15.81
5.06
7.88
8-3/4
7-5/8
240
3.38
16.63
5.44
8.25
9-9/16
8-5/16
244
3.75
18.88
5.81
9.50
4-Bolt
7.06
7.94
8.19
8.66
9.78
10.59
11.25
12.41
13.25
14.31
14.91
16.81
17.19
18.00
19.00
21.25
Min
8.63
9.68
9.88
10.38
11.63
12.59
13.25
14.50
15.63
16.75
17.38
19.38
20.88
21.63
22.50
24.75
1.39
1.44
1.50
1.72
1.92
2.09
2.28
2.47
2.45
2.61
2.91
3.13
3.16
3.30
3.50
3.42
0.13
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-105
F
Bolt Dia.
E
Max
9.63
11.00
11.00
11.63
13.13
14.50
14.50
16.00
17.38
18.25
19.25
21.63
23.63
24.88
25.00
27.88
W
Static
Oil
Level
1.16
1.25
1.38
1.47
1.64
1.80
1.84
1.34
2.03
2.03
2.09
2.19
2.42
2.53
2.47
3.25
1.88
2.13
2.13
2.13
2.38
2.75
2.75
3.25
3.38
3.75
3.75
4.25
4.63
4.50
5.00
5.25
H
5/8
3/4
3/4
3/4
7/8
-
J
1/2
5/8
5/8
5/8
3/4
3/4
3/4
7/8
1
1
1
1
1
1-1/4
1-1/4
1-1/2
Drain
Hole
Size
1.78
1.97
1.13
1.25
2.63
2.88
3.19
3.31
3.63
3.59
4.03
4.16
4.22
4.75
4.91
5.44
0.88
0.95
1.06
1.13
1.25
1.34
1.38
1.63
1.47
1.33
1.33
1.33
1.63
1.61
1.53
2.03
1/4-18NPSF
1/4-18NPSF
3/8-18NPSF
3/8-18NPSF
3/8-18NPSF
3/8-18NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
Bearing Reference
Guide
2-13/16
3
3-3/16
3-3/8
3-13/16
4-3/16
4-9/16
4-15/16
5-5/16
5-3/4
6-1/16
6-7/16
6-7/8
7-1/4
7-5/8
8-5/16
E-Family Roller
Bearings
3-7/16
3-5/8
3-15/16
4-1/8
4-1/2
4-7/8
5-5/16
5-7/8
6-1/4
6-5/8
7
7-7/16
7-13/16
8-3/8
8-3/4
9-9/16
A1
5.20
5.44
5.39
6.16
6.78
7.08
8.05
8.27
8.77
9.36
9.92
9.91
10.41
10.81
11.53
12.30
IMPERIAL
Housing
SELECTION
PAGE B15-13
UNIFIED SAF
S-3
Shaft
Size
Specialty Tapered
Products
S-2
Shaft
Size
S-2000
UNISPHERE II
Bearing Reference
Guide
A
E-Family Roller
Bearings
S-2
S-3
LER SEAL
Specialty Tapered
Products

clean environments
DODGE exclusive. popular

TRIPLE-TECT features with
simplified installation.
TRIPLE-TECT Seal
S-2000
END COVER Seal


as closed-end
S-2
Shaft
Size
(Inch)
S-3
Shaft
Size
(Inch)
Housing
Seal Group
TRIPLE-TECT
(TT)
UNISPHERE II
IMPERIAL
S-2
S-3
S-2
S-3
3-7/16
2-13/16
215
33
24
046401
046400
3-5/8
3
216
38
28
046402
043547
3-15/16
3-3/16
217
42
32
046404
046403
4-1/8
3-3/8
218
44
36
046406
046405
4-1/2
3-13/16
220
54
50
043555
046407
4-7/8
4-3/16
222
56
52
046408
043553
5-5/16
4-9/16
224
58
54
046411
046409
5-7/8
4-15/16
226
62
56
046410
043556
6-1/4
5-5/16
228
66
58
046412
046411
6-5/8
5-3/4
230
70
62
046414
046413
7
6-1/16
232
72
64
043565
046415
7-7/16
6-7/16
234
76
68
046416
043562
7-13/16
6-7/8
236
78
72
046417
046418
8-3/8
7-1/4
238
80
74
046420
046419
8-3/4
7-5/8
240
82
76
046423
046422
9-9/16
8-5/16
244
84
80
046425
046424
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
Part Number
TRIPLE-TECT
#Metal
Drop-in
Labyrinth
(TTDN)
(LER)
S-2
S-3
S-2
S-3
039568
039289 *045928 *045927
039291
039857
045931
042519
039515
039292
042089
042088
*045936 *045934
042527
045939
039297
039863
042098
042525
042248
045943
042085
042528
042249
042248
045951
045949
042538
045953
042049
042535
042221
042220
*042031 *042032
*045956 *045955
*042029 *042028
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-106
A
End
Cover
Part No.
S-3
040705
040706
040709
040710
040711
040712
040713
040681
040682
040683
040684
040687
TT
(Inch)
TTDN
(Inch)
LER
(Inch)
5.09
5.33
5.44
6.27
6.84
7.19
7.91
8.14
8.53
9.41
9.91
9.83
10.41
11.00
11.78
12.30
5.09
5.33
5.44
6.27
6.84
7.19
7.91
8.14
8.53
9.41
9.91
9.83
10.41
11.00
11.78
12.30
4.47
4.72
4.83
5.70
6.31
6.59
7.31
7.50
7.88
8.70
9.20
9.13
9.69
9.98
10.72
11.41
SELECTION
PAGE B15-13
Bearing Reference
Guide
215
216
217
218
220
222
224
226
228
230
232
234
236
238
240
244
FEATURES/BENEFITS
PAGE B15-3
Bearing
No.
22215
22216
22217
22218
22220
22222
22224
22226
22228
22230
22232
22234
22236
22238
22240
22244
Part
No.
421265
421266
421267
421268
421269
421270
421271
421272
421273
421274
421275
421276
421277
421278
421279
421280
Approx. Wt.
(lbs)
3.6
4.4
5.5
7.1
10.4
14.8
18.7
23.1
29.8
35.5
47.8
58.0
60.8
82.2
97.9
135.0
A
Inch (mm)
2.9528 (75)
3.1496 (80)
3.3465 (85)
3.5433 (90)
3.9370 (100)
4.3307 (110)
4.7244 (120)
5.1181 (130)
5.5118 (140)
5.9055 (150)
6.2992 (160)
6.6929 (170)
7.0866 (180)
7.4803 (190)
7.8740 (200)
8.6614 (220)
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-107
B
Inch (mm)
5.1181 (130)
5.5118 (140)
5.9055 (150)
6.2992 (160)
7.0866 (180)
7.8740 (200)
8.4646 (215)
9.0551 (230)
9.8425 (250)
10.6299 (270)
11.4173 (290)
12.2047 (310)
12.5984 (320)
13.3858 (340)
14.1732 (360)
15.7480 (400)
C
Inch (mm)
1.2205 (31)
1.2992 (33)
1.4173 (36)
1.5748 (40)
1.8110 (46)
2.0866 (53)
2.2835 (58)
2.5197 (64)
2.6772 (68)
2.8740 (73)
3.1496 (80)
3.3858 (86)
3.3858 (86)
3.6220 (92)
3.8583 (98)
4.2520 (108)
SELECTION
PAGE B15-13
IMPERIAL
Housing
UNIFIED SAF
Bearing Bore
mm
75
80
85
90
100
110
120
130
140
150
160
170
180
190
200
220
UNISPHERE II
S-2000
Specialty Tapered
Products
E-Family Roller
Bearings
USAF 22200 Spherical Roller Bearings
Bearing Reference
Guide
USAF 200 Series Bearing Shaft Details
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
Nominal
Bearing
Bore Dia.
(mm)
UNISPHERE II
IMPERIAL
75
80
85
90
95
100
105
110
120
125
130
140
150
160
170
180
190
200
220
Shaft Bearing Seat Diameters (Inch)

Normal Load
* S-l
Max
Min
2.9540
2.9532
3.1508
3.1501
3.3479
3.3470
3.5447
3.5438
3.7416
3.7407
3.9384
3.9375
4.1353
4.1344
4.3321
4.3312
4.7258
4.7249
4.9229
4.9219
5.1197
5.1187
5.5134
5.5124
5.9071
5.9061
6.3008
6.2998
6.6945
6.6935
7.0882
7.0872
7.4821
7.4809
7.8758
7.8746
8.6632
8.6620
Normal Load
P/C = 0.10 TO 0.18
Where: P= Equivalent dynamic load on the bearing (lbs.)

C= Basic dynamic load rating of bearing (lbs.)
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
High Load
Mean
Fit
.0011T
.0012T
.0014T
.0016T
.0019T
* S-l
Max
2.9543
3.1511
3.3484
3.5452
3.7421
3.9389
4.1358
4.33Z6
4.7263
4.9235
5.1203
5.5140
5.9077
6.3014
6.6951
7.0888
7.4829
7.8772
8.6646
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-108
Mean
Fit
Min
2.9536
3.1504
3.3475
3.5443
3.7412
3.9380
4.1349
4.3317
4.7254
4.9225
5.1193
5.5130
5.9067
6.3004
6.6941
7.0878
7.4817
7.8760
8.6634
High Load
P/C > 0.18
.0014T
.0015T
.0019T
.0022T
.0026T
.0032T
SELECTION
PAGE B15-13
Bearing Reference
Guide
USAF 22200 BEARING SHAFT DIMENSIONS - INCH
215
216
217
218
220
222
224
226
228
230
232
234
236
238
240
244
046756
046757
046758
046759
046760
046761
046762
046763
046764
046765
046766
046767
046768
046769
046770
046771
2.9528 (75mm)
3.1496 (80 mm)
3.3465 (85 mm)
3.5433 (90 mm)
3.9370 (100 mm)
4.3307 (110 mm)
4.7244 (120 mm)
5.1181 (130 mm)
5.5118 (140 mm)
5.9055 (150 mm)
6.2992 (160 mm)
6.6929 (170 mm)
7.0866 (180 mm)
7.4803 (190 mm)
7.8740 (200 mm)
8.6614 (220 mm)
3-7/16
3-5/8
3-15/16
4-1/8
4-1/2
4-7/8
5-5/16
5-7/8
6-1/4
6-5/8
7
7-7/16
7-13/16
8-3/8
8-3/4
9-9/16
2-13/16
3
3-3/16
3-3/8
3-13/16
4-3/16
4-9/16
4-15/16
5-5/16
5-3/4
6-1/16
6-7/16
6-7/8
7-1/4
7-5/8
8-5/16
Housing
Threads
Per
Inch
USAF 22200 BEARING SHAFT DIMENSIONS - INCH

B
D
Thread Major Dia
Thread Pitch Dia
Max
215
12
2.9330
216
12
3.1370
217
12
3.3400
218
12
3.5270
220
12
3.9180
222
12
4.325
224
12
4.716
226
12
5.106
228
12
5.497
230
12
5.888
232
8
6.284
234
8
6.659
236
8
7.066
238
8
7.472
240
8
7.847
244
8
8.628
Tolerance .005 through 2.6672 dia.; .010 for larger sizes
FEATURES/BENEFITS
PAGE B15-3
Min
Max
Min
2.9218
3.1258
3.3288
3.5158
3.9068
4.3138
4.7048
5.0948
5.4858
5.8768
6.2688
6.6438
7.0508
7.4568
7.8318
8.6128
2.8789
3.0829
3.2859
3.4729
3.8639
4.2709
4.6619
5.0519
5.4429
5.8339
6.2028
6.5778
6.9848
7.3908
7.7658
8.5468
2.8735
3.0770
3.2800
3.4655
3.8565
4.2626
4.6536
5.0436
5.4346
5.8256
6.1937
6.5687
6.9757
7.3817
7.7544
8.5347
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-109
C
Thread
Length
+1/64
-0
11/16
11/16
23/32
13/16
7/8
29/32
15/16
1
1-1/16
1-1/8
1-3/16
1-7/32
1-1/4
1-9/32
1-11/32
1-3/8
K
Full
Depth
Length
15/16
15/16
31/32
1-1/16
1-3/16
1-7/32
1-1/4
1-5/16
1-3/8
1-1/2
1-9/16
1-19/32
1-5/8
1-21/32
1-23/32
1-9/16
I
Thread
Relief
+1/64
-0
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
1/4
1/4
1/4
1/4
1/4
1/4
SELECTION
PAGE B15-13
R
Max
Radius
0.059
0.079
0.079
0.079
0.079
0.079
0.079
0.098
0.098
0.098
0.098
0.118
0.118
0.118
0.118
0.118
S-2000
S-3
P
Thread
Relief
DIA.
2.7995
3.0035
3.2065
3.3935
3.7845
4.1915
4.5825
4.9725
5.3635
5.7545
6.0993
6.4743
6.8813
7.2873
7.6623
8.4433
UNISPHERE II
S-2
Keyway
H
Width
+1/64
-
5/16
3/8
3/8
3/8
3/8
3/8
3/8
1/2
5/8
5/8
5/8
3/4
3/4
3/4
7/8
1-1/16
IMPERIAL
A
Brg Bore
F
Depth
+1/64
-
1/8
1/8
1/8
5/32
5/32
3/16
3/16
3/16
3/16
7/32
15/64
15/64
15/64
15/64
15/64
3/8
UNIFIED SAF
Housing
Locknut
&
Washer
Kit
Part No.
E-Family Roller
Bearings
Specialty Tapered
Products
Bearing Reference
Guide
USAF 200 Series Locknuts & Washers
M
E-Family Roller
Bearings
Specialty Tapered
Products
LOCKNUT
S-2000
Q
R
UNISPHERE II
LOCKWASHER
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-110
SELECTION
PAGE B15-13
Bearing Reference
Guide
L
Inch
3.88
4.16
4.41
4.66
5.19
5.72
6.12
6.75
7.09
7.69
8.06
8.66
9.06
9.47
9.84
11.00
M
Inch
0.59
0.59
0.62
0.69
0.75
0.78
0.81
0.88
0.94
0.97
1.03
1.06
1.09
1.12
1.19
1.25
R
Inch
2.988
3.192
3.410
3.597
4.003
4.410
4.816
5.209
5.600
6.001
6.407
6.782
7.189
7.595
8.000
8.719
Q
Inch
0.072
0.072
0.072
0.094
0.094
0.125
0.125
0.125
0.125
0.156
0.156
0.156
0.156
0.156
0.156
0.156
S-2000
Lockwasher
Descrip.
Part No.
W15
419150
W16
419152
W17
419154
W18
419156
W20
419158
W22
419160
W24
419162
W26
419164
W28
419166
W30
419168
W32
419170
W34
419172
W36
419174
W38
419176
W40
419171
W44
419178
UNISPHERE II
Part No.
460901
460902
460903
460904
460905
460906
041071
041064
041065
041072
041066
041067
041070
041068
040838
041069
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-111
SELECTION
PAGE B15-13
UNIFIED SAF
215
216
217
218
220
222
224
226
228
230
232
234
236
238
240
244
Locknut
Descrip.
AN15
AN16
AN17
AN18
AN20
AN22
AN24
AN26
AN28
AN30
AN32
AN34
AN36
AN38
AN40
N44
IMPERIAL
Housing
Specialty Tapered
Products
E-Family Roller
Bearings
USAF 200 Series Locknuts & Washers
Bearing Reference
Guide
E-Family Roller
Bearings
Specialty Tapered
Products
Shaft
Dia.
S-2000
S-2
S-3
Bearing
Bore
mm.
1-15/16
1-7/16
40
2-1/8
1-11/16
45
2-3/8
1-7/8
50
2-9/16
2-1/16
55
2-7/8
UNISPHERE II
3-1/6
3-1/4
IMPERIAL
3-7/16
3-5/8
UNIFIED SAF
3-15/16
2-1/4
2-7/16
2-5/8
2-13/16
3-3/16
FEATURES/BENEFITS
PAGE B15-3
60
65
70
75
80
85
Complete
Pillow Block
Part No.
Housing
Part No.**
Bearing
Part No.
P2B308-USAF-115TT
039355
P2B309-USAF-202TT
039356
P2B310-USAF-206TT
035915
P2B311-USAF-209TT
039357
P4B311-USAF-209TT
039371
P2B312-USAF-214TT
039358
P4B312-USAF-214TT
039372
P2B313-USAF-301TT
039359
P4B313-USAF-301TT
039373
P2B314-USAF-304TT
039360
P4B314-USAF-304TT
039374
P2B315-USAF-307TT
039361
P4B315-USAF-307TT
039375
P2B316-USAF-310TT
035916
P4B316-USAF-310TT
035917
P2B317-USAF-315TT
039362
P4B317-USAF-315TT
039376
H2S-308-USAF
039717
H2S-309-USAF
039719
H2S-310-USAF
035437
H2S-311-USAF
039721
H4S-311-USAF
039723
H2S-312-USAF
039725
H4S-312-USAF
039727
H2S-313-USAF
039729
H4S-313-USAF
039731
H2S-314-USAF
039733
H4S-314-USAF
039735
H2S-315-USAF
039737
H4S-315-USAF
039739
H2S-316-USAF
035438
H4S-316-USAF
035439
H2S-317-USAF
039741
H4S-317-USAF
039743
BRG22308C3
423124
BRG22309C3
423125
BRG22310C3
423143
BRG22311C3
423126
BRG22311C3
423126
BRG22312C3
423127
BRG22312C3
423127
BRG22313C3
423128
BRG22313C3
423128
BRG22314C3
423129
BRG22314C3
423129
BRG22315C3
423130
BRG22315C3
423130
BRG22316C3
423144
BRG22316C3
423144
BRG22317C3
423131
BRG22317C3
423131
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-112
Dynamic
Capacity
(C), lbs.
Max Rpm
(Grease)
35,500
4,300
42,500
3,800
51,000
3,400
60,000
3,200
60,000
3,200
69,500
2,800
69,500
2,800
78,000
2,600
78,000
2,600
86,500
2,400
86,500
2,400
100,000
2,200
100,000
2,200
112,000
2,200
112,000
2,200
122,000
2,000
122,000
2,000
SELECTION
PAGE B15-13
Shaft
Locknut
Part No.
N08
407305
N09
419187
N10
419188
N11
419184
N11
419184
N12
407302
N12
407302
N13
419185
N13
419185
N14
407036
N14
407036
AN15
460901
AN15
460901
AN16
460902
AN16
460902
AN17
460903
AN17
460903
Bearing Reference
Guide
FEATURES/BENEFITS
PAGE B15-3
# LER
Part No.
S2
S3
---
---
---
---
---
---
22TTDN209
035748
22TTDN209
035748
26TTDN214
035750
26TTDN214
035750
28TTDN301
035751
28TTDN301
035751
32TTDN304
035752
32TTDN304
035752
38TTDN307
039568
38TTDN307
039568
38TTDN310
039291
38TTDN310
039291
42TTDN315
039515
42TTDN315
039515
14TTDN201
035745
14TTDN201
035745
14TTDN204
035747
14TTDN204
035747
22TTDN207
035744
22TTDN207
035744
22TTDN210
035749
22TTDN210
035749
24TTDN213
039289
24TTDN213
039289
28TTDN300
039857
28TTDN300
039857
32TTDN303
039292
32TTDN303
039292
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-113
S-2
12LER115
042512
14LER202
*046472
18LER206
046175
22LER209
*046474
22LER209
*046474
26LER214
046476
26LER214
046476
28LER301
*046477
28LER301
*046477
32LER304
046478
32LER304
046478
38LER307
*045928
38LER307
*045928
38LER310
045931
38LER310
045931
42LER315
042089
42LER315
042089
S-3
08LER107
042193
10LER111
*042199
12LER114
046176
14LER201
*046471
14LER201
*046471
14LER204
046473
14LER204
046473
22LER207
*046177
22LER207
*046177
22LER210
046475
22LER210
046475
24LER213
*045927
24LER213
*045927
28LER300
042519
28LER300
042519
32LER303
042088
32LER303
042088
SELECTION
PAGE B15-13
End
Cover
Part No.
EC-08
040700
EC-10
040701
EC-12
040702
EC-14
040703
EC-14
040703
EC-14
040703
EC-14
040703
S-2000
TTDN
Part No.
-------
UNISPHERE II
Lockwasher
Part No.
--EC24
040705
EC24
040705
EC28
040706
EC28
040706
IMPERIAL
TRIPLE-TECT
Part No.
S-2
S-3
S-2
S-3
W08
12TT115
08TT107
1-15/16
1-7/16
40
419151
043540
043578
W09
14TT202
10TT111
2-1/8
1-11/16
45
419180
046464
043579
W10
18TT206
12TT114
2-3/8
1-7/8
50
419181
046166
046167
W11
22TT209
14TT201
419182
046466
046463
2-9/16
2-1/16
55
W11
22TT209
14TT201
419182
046466
046463
W12
26TT214
14TT204
419008
046468
046465
2-7/8
2-1/4
60
W12
26TT214
14TT204
419008
046468
046465
W13
28TT301
22TT207
419183
046469
046168
3-1/6
2-7/16
65
W13
28TT301
22TT207
419183
046469
046168
W14
32TT304
22TT210
419153
046470
046467
3-1/4
2-5/8
70
W14
32TT304
22TT210
419153
046470
046467
W15
38TT307
24TT213
419150
046401
046400
3-7/16
2-13/16
75
W15
38TT307
24TT213
419150
046401
046400
W16
38TT310
28TT300
419152
046402
042547
3-5/8
3
80
W16
38TT310
28TT300
419152
046402
042547
W17
42TT315
32TT303
419154
046404
046403
3-15/16
3-3/16
85
W17
42TT315
32TT303
419154
046404
046403
Bearing
Bore
mm.
----UNIFIED SAF
Shaft
Dia.
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
Shaft
Dia.
E-Family Roller
Bearings
Specialty Tapered
Products
S-2
S-3
Bearing
Bore
mm.
4-1/2
3-13/16
100
4-7/8
4-3/16
110
5-5/16
4-9/16
120
5-7/8
4-15/16
130
6-1/4
5-5/16
140
6-5/8
5-3/4
150
6-1/16
160
7-7/16
6-7/16
170
8-3/8
7-1/4
190
Complete
Pillow Block
Part No.
Housing
Part No.**
Bearing
Part No.
P4B320-USAF-408TT
039377
P4B322-USAF-414TT
039378
P4B324-USAF-505TT
039380
P4B326-USAF-514TT
039381
P4B328-USAF-604TT
039382
P4B330-USAF-610TT
039383
P4B332-USAF-700TT
039384
P4B334-USAF-707TT
039385
P4B338-USAF-806TT
039386
H4S-320-USAF
039745
H4S-322-USAF
039747
H4S-324-USAF
039749
H4S-326-USAF
039750
H4S-328-USAF
039751
H4S-330-USAF
039752
H4S-332-USAF
039753
H4S-334-USAF
039754
H4S-338-USAF
039755
BRG22320C3
423132
BRG22322C3
423133
BRG22324C3
423134
BRG22326C3
423135
BRG22328C3
423136
BRG22330C3
423137
BRG22332C3
423138
BRG22334C3
423139
BRG22338C3
423140
Dynamic
Capacity
(C), lbs.
Max Rpm
(Grease)
146,000
1,700
180,000
1,500
204,000
1,400
236,000
1,300
275,000
1,200
310,000
1,100
325,000
1,000
360,000
950
415,000
850
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-114
SELECTION
PAGE B15-13
Locknut
Part No.
AN204
060905
AN224
060906
AN24
041071
AN26
041064
AN28
041065
AN30
041072
AN32
041066
AN34
041067
AN38
041068
TTDN
Part No.
Lockwasher
Part No.
# LER
Part No.
S-2
S-3
---
---
56TTDN414
039297
52TTDN403
039863
---
---
---
---
---
---
---
---
---
---
---
---
---
---
S2
54LER408
042527
56LER414
042098
58LER505
042248
62LER514
042085
66LER604
042249
70LER610
045951
72LER700
042538
76LER707
042049
80LER806
*042031
S3
50LER313
045939
52LER403
042525
54LER409
045943
56LER415
042528
58LER505
042248
62LER512
045949
64LER601
045953
68LER607
042535
74LER704
*042032
End
Cover
Part No.
EC50
040709
EC52
040710
EC54
040711
EC56
040712
EC58
040713
--EC64
040681
EC68
040682
EC74
040691
Bearing Reference
Guide
TRIPLE-TECT
Part No.
S2
S3
S-2
S-3
W20
54TT408
50TT313
4-1/2
3-13/16
100
419158
043555
046407
W22
56TT414
52TT403
4-7/8
4-3/16
110
419160
046408
043553
W24
58TT510
54TT409
5-5/16
4-9/16
120
419162
046411
046409
W26
62TT514
56TT415
5-7/8
4-15/16
130
419164
046410
043556
W28
66TT604
58TT505
6-1/4
5-5/16
140
419166
046412
046411
W30
70TT610
62TT512
6-5/8
5-3/4
150
419168
046414
046413
W32
72TT700
64TT601
7
6-1/16
160
419170
043565
046415
W34
76TT707
68TT607
7-7/16
6-7/16
170
419172
046416
043562
W38
80TT806
74TT704
8-3/8
7-1/4
190
419176
046420
046419
Bearing
Bore
mm.
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-115
SELECTION
PAGE B15-13
UNIFIED SAF
IMPERIAL
UNISPHERE II
S-2000
Shaft
Dia.
E-Family Roller
Bearings
Specialty Tapered
Products
Bearing Reference
Guide
E-Family Roller
Bearings
LUBE NOTE:
All Sizes Use A
Grease Fitting
P
30
DRAIN HOLE
SIZE
Specialty Tapered
Products
J
"F" BOLTS
M
H
Y
X
"D" MIN
S-2000
"D" MAX
B
UNISPHERE II
IMPERIAL
CL HSG
C
UNIFIED SAF
K
(AT C
L SHAFT)
A1
FEATURES/BENEFITS
PAGE B15-3
W
STATIC
OIL LEVEL
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-116
SELECTION
PAGE B15-13
1-15/16
2-1/8
2-3/8
2-9/16
2-7/8
3-1/16
3-1/4
3-7/16
3-5/8
3-15/16
4-1/2
4-7/8
5-5/16
5-7/8
6-1/4
6-5/8
7
7-7/16
8-3/8
1-7/16
1-11/16
1-7/8
2-1/16
2-1/4
2-7/16
2-5/8
2-13/16
3
3-3/16
3-13/16
4-3/16
4-9/16
4-15/16
5-5/16
5-3/4
6-1/16
6-7/16
7-1/4
308
309
310
311
312
313
314
315
316
317
320
322
324
326
328
330
332
334
338
4.06
4.25
4.70
4.64
5.20
5.44
5.39
6.16
6.38
6.78
8.05
8.27
9.36
9.92
9.91
10.41
10.81
11.53
12.30
8.25
9.63
10.63
11.00
11.13
12.59
12.59
13.63
14.17
15.36
16.50
18.38
20.88
21.66
24.75
26.75
28.00
28.75
32.75
2.34
2.75
2.75
3.13
3.13
3.50
3.50
3.88
3.88
4.34
4.72
5.13
6.25
6.25
6.75
7.13
7.50
8.00
8.88
S-2
Shaft
Size
S-3
Shaft
Size
Housing
2-Bolt
Min
6.50
7.38
7.75
8.13
8.63
9.63
9.88
10.25
10.88
11.63
-
FEATURES/BENEFITS
PAGE B15-3
Max
7.00
8.25
9.00
9.50
9.63
11.00
11.00
11.75
12.38
13.13
-
1-15/16
1-7/16
308
1.03
4.58
1.88
2.50
2-1/8
1-11/16
309
1.03
5.25
1.97
2.75
2-3/8
1-7/8
310
1.41
5.72
2.20
3.00
2-9/16
2-1/16
311
1.03
5.94
2.16
3.00
2-7/8
2-1/4
312
1.25
6.44
2.31
3.25
3-1/16
2-7/16
313
1.06
6.75
2.42
3.50
3-1/4
2-5/8
314
1.25
7.38
2.47
3.75
3-7/16
2-13/16
315
1.44
7.75
2.84
4.00
3-5/8
3
316
1.22
8.25
2.95
4.25
3-15/16
3-3/16
317
1.66
8.75
3.16
4.50
4-1/2
3-13/16
320
1.50
10.25
3.64
5.25
4-7/8
4-3/16
322
2.06
11.53
3.75
6.00
5-5/16
4-9/16
324
2.38
12.50
4.33
6.31
5-7/8
4-15/16
326
2.34
13.31
4.63
6.69
6-1/4
5-5/16
328
2.88
14.56
4.63
7.06
6-5/8
5-3/4
330
3.00
15.13
4.88
7.50
7
6-1/16
332
3.13
15.81
5.06
7.88
7-7/16
6-7/16
334
3.38
16.63
5.44
8.25
8-3/8
7-1/4
338
3.75
18.88
5.81
9.50
Housing width with drain plugs. Length thru bore page B15-118.
4-Bolt
P
5.13
5.78
6.13
6.50
7.06
7.94
8.19
8.66
9.03
9.78
11.25
12.41
14.31
14.91
16.81
17.19
18.00
19.00
21.25
Min
8.13
8.63
9.63
9.88
10.38
10.63
11.63
13.25
14.50
16.75
17.38
19.38
20.88
21.63
22.50
24.75
1.17
1.23
1.38
1.42
1.52
1.58
1.64
1.77
1.83
1.91
2.30
2.50
2.64
2.84
3.09
3.27
3.44
3.59
3.89
0.13
0.13
0.22
0.13
0.13
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-117
E
Max
9.50
9.63
11.00
11.00
11.63
12.50
13.13
14.50
16.00
18.25
19.25
21.63
23.63
24.38
25.00
27.88
1.88
1.88
2.13
2.13
2.13
2.13
2.38
2.75
3.25
3.75
3.75
4.25
4.63
4.50
5.00
5.25
F
Bolt Dia.
2-Bolt
4-Bolt
1/2
5/8
5/8
5/8
1/2
5/8
1/2
3/4
5/8
3/4
5/8
3/4
5/8
3/4
5/8
7/8
3/4
3/4
7/8
1
1
1
1
1-1/4
1-1/4
1-1/2
W
Static
Oil Level
Drain
Hole
Size
1.19
1.28
1.38
1.44
1.31
1.41
1.47
1.59
1.69
1.75
2.03
2.41
2.38
2.44
2.56
2.63
2.69
2.75
3.38
1.25
1.94
1.53
1.66
1.78
1.97
1.13
1.25
2.38
2.63
3.19
3.31
3.59
4.03
4.16
4.22
4.75
4.91
5.44
0.81
0.83
0.95
0.78
0.88
0.95
1.06
1.13
1.17
1.25
1.38
1.63
1.33
1.33
1.33
1.63
1.61
1.58
2.03
1/8-27NPSI
1/8-27NPSI
1/8-27NPSI
1/8-27NPSI
1/4-18NPSF
1/4-18NPSF
3/8-18NPSF
3/8-18NPSF
3/8-18NPSF
3/8-18NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
1/2-14NPSF
SELECTION
PAGE B15-13
Bearing Reference
Guide
E-Family Roller
Bearings
A1
Specialty Tapered
Products
Housing
S-2000
S-3
Shaft
Size
UNISPHERE II
S-2
Shaft
Size
IMPERIAL
UNIFIED SAF
Bearing Reference
Guide
A
LENGTH THRU BORE
W/SEALS
E-Family Roller
Bearings
Specialty Tapered
Products
S-3
S-2
S-2000
UNISPHERE II
TRIPLE-TECT Seal
DODGE exclusive. Popular

TRIPLE-TECT features
simplify installation.
General purpose seal for

wet or dirty environments
IMPERIAL
LER Seal
END COVER Seal

UNIFIED SAF

clean environments

as closed-end
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-118
SELECTION
PAGE B15-13
Housing
Seal Group
TRIPLE-TECT
(TT)
Bearing Reference
Guide
A
End
Cover
S-3
040700
040701
040702
040703
040703
040705
040706
040709
040710
040711
040712
040713
040681
040682
-
TT
(Inch)
TTDN
(Inch)
LER
(Inch)
4.19
4.36
4.81
4.80
5.02
5.34
5.44
6.20
6.42
6.39
7.86
8.09
9.28
9.84
9.78
10.39
10.69
11.44
12.44
4.19
4.36
4.81
4.80
5.02
5.34
5.44
6.20
6.42
6.39
7.86
8.09
9.28
9.84
9.78
10.39
10.69
11.44
12.44
3.64
3.83
4.28
4.19
4.42
4.69
4.80
5.59
5.81
6.17
7.33
7.50
8.69
9.20
9.13
9.70
9.98
10.73
11.70
IMPERIAL
UNISPHERE II
S-2
S-3
S-2
S-3
1-15/16
1-7/16
308
12
8
043540
043578
2-1/8
1-11/16
309
14
10
046464
043579
2-3/8
1-7/8
310
18
12
046166
046167
2-9/16
2-1/16
311
22
14
046466
046463
2-7/8
2-1/4
312
26
14
046468
046465
3-1/16
2-7/16
313
28
22
046469
046168
3-1/4
2-5/8
314
32
22
046470
046467
3-7/16
2-13/16
315
38
24
046401
046400
3-5/8
3
316
38
28
046402
043547
3-15/16
3-3/16
317
42
32
046404
046403
4-1/2
3-13/16
320
54
50
043555
046407
4-7/8
4-3/16
322
56
52
046408
043553
5-5/16
4-9/16
324
58
54
046411
046409
5-7/8
4-15/16
326
62
56
046410
043556
6-1/4
5-5/16
328
66
58
046412
046411
6-5/8
5-3/4
330
70
62
046414
046413
7
6-1/16
332
72
64
043565
046415
7-7/16
6-7/16
334
76
68
046416
043562
8-3/8
7-1/4
338
80
74
046420
046419
Part Number
TRIPLE-TECT
# Metal
Drop-In
Labyrinth
(TTDN)
(LER)
S-2
S-3
S-2
S-3
042512
042193
*046472 *042199
046175
046176
035748
035745 *046474 *046471
035750
035747
046476
046473
035751
035744 *046477 *046177
035752
035749
046478
046475
039290
039289 *045928 *045927
039291
039857
045931
042519
039515
039292
042089
042088
042527
045939
039297
039863
042098
042525
042248
045943
042085
042528
042249
042248
045951
045949
*042538 *045953
042049
042535
042031
042032
E-Family Roller
Bearings
S-3
Shaft
Size
(Inch)
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-119
SELECTION
PAGE B15-13
UNIFIED SAF
S-2
Shaft
Size
(Inch)
Specialty Tapered
Products
S-2000
Bearing Reference
Guide
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-120
SELECTION
PAGE B15-13
Bearing Reference
Guide
Part No
Approx.
Wt
(Lbs.)
A
Inch
B
Inch
C
Inch
308
309
310
311
312
313
314
315
316
317
320
322
324
326
328
330
332
334
338
22308
22309
22310
22311
22312
22313
22314
22315
22316
22317
22320
22322
22324
22326
22328
2230
22332
22334
22338
423124
423125
423143
423126
423127
423128
423129
423130
423144
423131
423132
423133
423134
423135
423136
423137
423138
423139
423140
2.3
3.0
3.9
5.1
6.5
7.8
9.3
11.5
13.1
15.7
28.0
38.8
48.3
59.7
75.4
90.4
113.0
132.0
179.0
1.5748 (40)
1.7717 (45)
1.9685 (50)
2.1654 (55)
2.3622 (60)
2.5591 (65)
2.7559 (70)
2.9528 (75)
3.1496 (80)
3.3465 (85)
3.9370 (100)
4.3307 (110)
4.7244 (120)
5.1181 (130)
5.5118 (140)
5.9055 (150)
6.2992 (160)
6.6929 (170)
7.4803 (190)
3.5433 (90)
3.9370 (100)
4.3307 (110)
4.7244 (120)
5.1181 (130)
5.5118 (140)
5.9055 (150)
6.2992 (160)
6.6929 (170)
7.0866 (180)
8.4646 (215)
9.4488 (240)
10.2362 (260)
11.0236 (280)
11.8110 (300)
12.5984 (320)
13.3858 (350)
14.1732 (360)
15.7480 (400)
1.2992 (33)
1.4173 (36)
1.5758 (40)
1.6929 (43)
1.8110 (46)
1.8898 (48)
2.0079 (51)
2.1654 (55)
2.2835 (58)
2.3622 (60)
2.8740 (73)
3.1496 (80)
3.3858 (86)
3.6614 (93)
4.0157 (102)
4.2520 (108)
4.4882 (114)
4.7244 (120)
5.1969 (132)
S-2000
Bearing No
UNISPHERE II
Housing
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-121
SELECTION
PAGE B15-13
UNIFIED SAF
IMPERIAL
Shaft
Size
Under Brg.
mm
40
45
50
55
60
65
70
75
80
85
100
110
120
130
140
150
160
170
190
Specialty Tapered
Products
E-Family Roller
Bearings
Bearing Reference
Guide
E-Family Roller
Bearings
Specialty Tapered
Products
Nominal
Bearing
Bore Dia.
(mm)
Shaft Bearing Seat Diameters (Inch)

Normal Load
* S-1
High Load
Mean
Fit
S-2000
UNISPHERE II
IMPERIAL
Max
Min
40
1.5758
1.5752
.0009T
45
1.7727
1.7721
50
1.9697
1.9689
55
2.1666
2.1658
60
2.3634
2.3626
.0011T
65
2.5603
2.5595
70
2.7571
2.7563
75
2.9540
2.9532
80
3.1508
3.1501
.0012T
85
3.3479
3.3470
100
3.9384
3.9375
.0014T
110
4.3321
4.3312
120
4.7258
4.7249
130
5.1197
5.1187
140
5.5134
5.5124
150
5.9071
5.9061
.0016T
160
6.3008
6.2998
170
6.6945
6.6935
190
7.4821
7.4809
.0019T
Normal Load
P/C = 0.10 TO 0.18

Where P = Equivalent dynamic load on the bearing (lbs.)

C = Basic dynamic load rating of bearing (lbs.)
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
* S-1
Max
1.5761
1.7730
1.9700
2.1669
2.3637
2.5606
2.7574
2.9543
3.1511
3.3484
3.9389
4.3326
47263
5.1203
5.5140
5.9077
6.3014
6.6951
7.4829
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-122
Mean
Fit
Min
1.5655
1.7724
1.9693
2.1662
2.3630
2.5599
2.7567
2.9536
3.1504
3.3475
3.9380
4.3317
4.7254
5.1193
5.5130
5.9067
6.3004
6.6941
7.4817
High Load
P/C > 0.18
.0012T
.0014T
.0015T
.0019T
.0022T
.0026T
SELECTION
PAGE B15-13
Bearing Reference
Guide
1.5748 (40 mm)

1.7717 (45 mm)
1.9685 (50 mm)
2.1654 (55 mm)
2.3622 (60 mm)
2.5591 (65 mm)
2.7559 (70 mm)
2.9528 (75 mm)
3.1496 (80 mm)
3.3465 (85 mm)
3.9370 (100 mm)
4.3307 (110 mm)
4.7244 (120 mm)
5.1181 (130 mm)
5.5118 (140 mm)
5.9055 (150 mm)
6.2992 (160 mm)
6.6929 (170 mm)
7.4803 (190 mm)
1-15/16
2-1/8
2-3/8
2-9/16
2-7/8
3-1/16
3-1/4
3-7/16
3-5/8
3-15/16
4-1/2
4-7/8
5-5/16
5-7/8
6-1/4
6-5/8
7
7-7/16
8-3/8
1-7/16
1-11/16
1-7/8
2-1/16
2-1/4
2-7/16
2-5/8
2-13/16
3
3-3/16
3-13/16
4-3/16
4-9/16
4-15/16
5-5/16
5-3/4
6-1/16
6-7/16
7-1/4
Housing
Threads
Per
Inch
B
Thread Major Dia
Max
308
18
1.5630
309
18
1.7670
310
18
1.9670
311
18
2.1570
312
18
2.3600
313
18
2.5480
314
18
2.7510
315
12
2.9330
316
12
3.1370
317
12
3.3400
320
12
3.9180
322
12
4.325
324
12
4.716
326
12
5.106
328
12
5.497
330
12
5.888
332
8
6.284
334
8
6.659
338
8
7.472
Tolerance .005 through 2.6672 dia; .010 for larger sizes
FEATURES/BENEFITS
PAGE B15-3
D
Thread Pitch Dia
Min
Max
Min
1.5548
1.7588
1.9588
2.1488
2.3518
2.5398
2.7428
2.9218
3.1258
3.3288
3.9068
4.3138
4.7048
5.0948
5.4858
5.8768
6.2688
6.6438
7.4568
1.5269
1.7309
1.9309
2.1209
2.3239
2.5119
2.7149
2.8789
3.0829
3.2859
3.8639
4.2709
4.6619
5.0519
5.4429
5.8339
6.2028
6.5778
7.3908
1.5224
1.7204
1.9264
2.1159
2.3188
2.5068
2.7098
2.8735
3.0770
3.2800
3.8565
4.2626
4.6536
5.0436
5.4346
5.8256
6.1937
6.5687
7.3817
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-123
C
Thread
Length
+1/64
-0
17/32
17/32
19/32
19/32
5/8
21/32
21/32
11/16
11/16
23/32
7/8
29/32
15/16
1
1-1/16
1-1/8
1-3/16
1-7/32
1-9/32
I
Thread
Relief
+1/64
-0
3/32
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
1/4
1/4
1/4
SELECTION
PAGE B15-13
0.059
0.059
0.079
0.079
0.079
0.079
0.079
0.079
0.079
0.098
0.098
0.098
0.098
0.118
0.118
0.118
0.118
0.118
0.157
Specialty Tapered
Products
046751
046752
046753
046754
046772
046755
046773
046756
046757
046758
046760
046761
046762
046763
046764
046765
046766
046767
046769
R
Max
Radius
S-2000
308
309
310
311
312
313
314
315
316
317
320
322
324
326
328
330
332
334
338
K
Full
Depth
Length
21/32
11/16
3/4
3/4
25/32
13/16
29/32
15/16
15/16
31/32
1-3/16
1-7/32
1-1/4
1-5/16
1-3/8
1-1/2
1-9/16
1-19/32
1-21/32
P
Thread
Relief
Dia.
1.4792
1.6832
1.8832
2.0732
2.2762
2.4642
2.6672
2.7995
3.0035
3.2065
3.7845
4.1915
4.5825
4.9725
5.3635
5.7545
6.0993
6.4743
7.2873
UNISPHERE II
S-3
H
Width
+1/64
-0
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
1/2
5/8
5/8
5/8
3/4
3/4
IMPERIAL
S-2
F
Depth
+1/64
-0
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
3/16
3/16
3/16
3/16
7/32
15/64
15/64
15/64
UNIFIED SAF
Housing
A
Brg
Bore
E-Family Roller
Bearings
Keyway
Locknut
&
Washer
Kit
Part No.
Bearing Reference
Guide
USAF 300 Series Bearing Locknut & Washers
M
E-Family Roller
Bearings
Q
L
Specialty Tapered
Products
LOCKNUT
Housing
S-2000
UNISPHERE II
308
309
310
311
312
313
314
315
316
317
320
322
324
326
328
330
332
334
338
LOCKWASHER
Locknut
Descrip.
N08
N09
N10
N11
N12
N13
N14
AN15
AN16
AN17
AN20
AN22
AN24
AN26
AN28
AN30
AN32
AN34
AN38
Part No.
407305
419187
419188
419184
407302
419185
407306
460901
460902
460903
460905
460906
041071
041064
041065
041072
041066
041067
041068
Lockwasher
Descrip.
Part No.
W08
419151
W09
419180
W10
419181
W11
419182
W12
419008
W13
419183
W14
419153
W15
419150
W16
419152
W17
419154
W20
419158
W22
419160
W24
419162
W26
419164
W28
419166
W30
419168
W32
419170
W34
419172
W38
419176
L
(Inch)
M
(Inch)
R
(Inch)
Q
(Inch)
2.25
2.53
2.69
2.97
3.16
3.38
3.62
3.88
4.16
4.41
5.19
5.72
6.12
6.75
7.09
7.69
8.06
8.66
9.47
0.44
0.44
0.50
0.50
0.53
0.56
0.56
0.59
0.59
0.62
0.75
0.78
0.81
0.88
0.94
0.97
1.03
1.06
1.12
1.583
1.792
1.992
2.182
2.400
2.588
2.791
2.988
3.192
3.410
4.003
4.410
4.816
5.209
5.600
6.001
6.407
6.782
7.595
0.048
0.048
0.048
0.053
0.053
0.053
0.053
0.072
0.072
0.072
0.094
0.125
0.125
0.125
0.125
0.156
0.156
0.156
0.156
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-124
SELECTION
PAGE B15-13
Bearing Reference
Guide
FEATURES/BENEFITS
PAGE B15-3
Stab. Ring No.
308
609/309
610/310
611/311
312
613/313
314
615/315
616/316
617/317
620/320
622/322
624/324
626/326
628/328
630/330
632/332
634/334
638/338
10-8
11-9
0-10
6-11
15-0
16-13
17-14
18-15
19-16
20-17
24-20
0-22
0-24
0-26
0-28
36-30
38-32
40-34
44-38
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-125
Stab. Ring Part No.
042335
042315
046642
046632
041174
041172
041175
041173
046643
041176
041185
046635
046634
046637
046638
041184
041182
040850
041183
S-2000
509
9-9
510
10-8
511
11-9
513
13-0
515/215
15-0
516/216
16-13
517/217
17-14
518/218
18-15
520/220
20-17
522/222
22-19
524/224
24-20
526/226
26-0
528/228
28-0
530/230
30-0
532/232
32-0
534/234
34-0
536/236
36-30
538/238
38-32
540/240
40-34
544S/544/244
44-38
* 048
A8897
* 052
A8898
* 056/056L
A8819
* Two stabilizing rings required per housings
Part numbers for reference only. Housings come equipped with stabilizing rings enclosed
Housing
UNISPHERE II
Stab. Ring Part No.
041987
042335
042315
042316
041174
041172
041175
041173
041176
041177
041185
041178
041179
041186
041180
041181
041184
041182
046639
041183
041161
422554
041213
IMPERIAL
Stab. Ring No.
SELECTION
PAGE B15-13
UNIFIED SAF
Housing
Specialty Tapered
Products
E-Family Roller
Bearings
USAF Stabilizing Rings
Bearing Reference
Guide
USAF Pillow Block - 500 & 200
DOWEL PIN, LUBRICATION & MOUNTING HOLE POSITIONS
JJ1
E-Family Roller
Bearings
GG1
GG2
Specialty Tapered
Products
CL OF HSG
JJ2
J
G
S-2000
II
HH
GG1
UNISPHERE II
GG2
C
L
OF HSG
IMPERIAL
CC
BB
TYP
H
G
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-126
SELECTION
PAGE B15-13
AA
TYP
Bearing Reference
Guide
G
H
I
J
USAF
Housing
AA
BB
CC
GG1
GG2
G
Max Dia
HH
509
510
511
513
515/215
516/216
517/217
518/218
520/220
522/222
524/224
526/226
528/228
530/230
532/232
534/234
536/236
538/238
540/240
544/244
048
052
056
1.45
1.53
1.66
1.84
1.88
2.03
2.06
2.38
2.09
2.81
3.13
3.25
3.48
3.84
4.09
4.13
4.31
4.50
4.86
5.20
4.86
5.20
5.67
0.84
0.89
1.00
1.28
1.22
1.38
1.47
1.50
1.72
1.94
1.91
2.09
2.53
2.53
2.56
3.00
3.00
3.13
3.22
3.63
3.22
3.63
3.75
0.25
0.27
0.28
0.34
0.36
0.31
0.41
0.44
0.53
0.59
0.69
0.75
0.75
0.81
0.91
1.00
1.00
1.13
1.13
1.19
1.13
1.19
1.20
5.31
5.31
6.69
7.50
7.50
8.59
8.59
9.44
10.25
11.03
11.42
12.78
13.59
14.75
15.56
-
0.91
0.91
1.06
1.25
1.25
1.38
1.38
1.45
1.61
1.78
1.78
2.05
2.16
2.38
2.36
-
15/64
15/64
5/16
5/16
5/16
5/16
5/16
5/16
5/16
15/32
15/32
15/32
15/32
15/32
15/32
-
9.06
9.06
10.25
10.25
11.91
12.59
13.78
13.88
14.97
16.53
17.72
18.50
20.50
22.25
23.00
23.75
26.83
23.75
26.83
27.88
FEATURES/BENEFITS
PAGE B15-3
Hole
Size
11/16
11/16
13/16
13/16
13/16
15/16
15/16
15/16
1-1/16
1-5/16
1-5/16
1-5/16
1-9/16
1-9/16
1-9/16
1-9/16
1-13/16
1-9/16
1-13/16
2-1/16
J
Bolt
Size
5/8
5/8
3/4
3/4
3/4
7/8
7/8
7/8
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-3/4
1-1/2
1-3/4
2
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-127
II
JJ1
JJ2
10.25
10.25
11.59
11.59
12.63
14.36
15.50
15.88
17.38
18.69
19.50
20.28
23.38
25.25
26.63
27.25
30.75
27.25
30.75
32.25
6.31
6.31
7.88
8.66
8.66
9.94
9.94
11.03
11.81
12.91
13.00
14.56
15.75
16.94
17.72
-
1.34
1.34
1.56
1.88
1.88
2.06
2.06
2.28
2.59
2.91
2.91
3.09
3.63
3.94
3.94
-
Hole
Size
7/16
7/16
9/16
9/16
9/16
11/16
11/16
11/16
13/16
13/16
13/16
15/16
1-1/16
1-1/16
1-1/16
-
SELECTION
PAGE B15-13
Bolt
Size
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
7/8
1
1
1
-
Specialty Tapered
Products
S-2000
UNISPHERE II
C
D
IMPERIAL
E-Family Roller
Bearings
Description
Optional Seal Grease Location
Optional Location For Vent, Vibration Pickup And/or Grease Location For Non W33
Grooved Bearing
Position For Thermocouple Location
Position For Lubrication Of Bearing With W33 Groove
Lubrication Port For W33 Groove
Groove Bearing Drilled Standard On Pillow Blocks
Pre-Drilled And Tap Location For Vent Or Side Lubrication For Bearing Without W33
Groove
Dowel Pin Location For Metric Plummer Blocks
Drilling Location For Two Bolt Mounting Or Optional Dowel Pin Location
Optional Location For Dowel Pin Location
Drilling Location For Four Bolt Mounting Or Optional Dowel Pin Location
UNIFIED SAF
Item
A
Bearing Reference
Guide
JJ1
E-Family Roller
Bearings
GG1
GG2
Specialty Tapered
Products
CL OF HSG
JJ2
J
G
S-2000
II
HH
GG1
UNISPHERE II
GG2
C
L
OF HSG
IMPERIAL
CC
BB
TYP
H
G
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-128
SELECTION
PAGE B15-13
AA
TYP
Bearing Reference
Guide
E
F
G
H
I
J
AA
BB
CC
GG1
GG2
G
Max
Dia
HH
308
609/309
610/310
611/311
312
613/313
314
615/315
616/316
617/317
620/320
622/322
624/324
626/326
628/328
630/330
632/332
634/334
638/338
1.53
1.66
1.84
1.84
1.88
2.03
2.06
2.38
2.53
2.69
3.13
3.25
3.84
4.09
4.13
4.31
4.50
4.86
5.20
0.89
1.00
1.00
1.56
1.22
1.38
1.47
1.50
1.63
1.72
1.91
2.09
2.53
2.56
3.00
3.00
3.13
3.22
3.63
0.27
0.28
0.34
0.34
0.36
0.31
0.41
0.44
0.53
0.53
0.69
0.75
0.81
0.91
1.00
1.00
1.13
1.13
1.19
5.31
6.69
6.77
7.50
7.50
8.59
8.59
9.44
9.44
10.25
11.42
12.78
14.75
15.56
-
0.91
1.06
1.06
1.25
1.25
1.38
1.38
1.45
1.45
1.61
1.18
2.05
2.38
2.36
-
15/64
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
15/32
15/32
15/32
15/32
-
9.06
9.06
10.25
10.25
11.41
11.41
12.59
13.88
14.99
17.72
18.50
20.50
22.25
23.00
23.75
26.31
Hole
Size
11/16
11/16
13/16
13/16
13/16
13/16
15/16
15/16
1-1/16
1-5/16
1-5/16
1-9/16
1-9/16
1-9/16
1-9/16
1-13/16
J
Bolt
Size
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
1
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-3/4
II
JJ1
JJ2
10.25
10.25
11.59
11.59
12.63
13.00
14.36
15.88
17.38
19.50
20.28
23.38
25.25
26.62
27.25
30.75
6.31
7.88
7.88
8.66
8.66
9.94
9.94
11.03
11.03
11.81
13.00
14.56
16.94
17.72
-
1.34
1.56
1.56
1.88
1.88
2.06
2.06
2.28
2.28
2.59
2.91
3.16
3.94
3.94
-
Hole
Size
7/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16
11/16
13/16
13/16
15/16
1-1/16
1-1/16
-
Bolt
Size
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
7/8
1
1
-
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-129
SELECTION
PAGE B15-13
UNIFIED SAF
IMPERIAL
USAF
Housing
Specialty Tapered
Products
C
D
S-2000
E-Family Roller
Bearings
Description
Optional Seal Grease Location
Optional Location For Vent, Vibration Pickup And/Or Grease Location For Non W33
Grooved Bearing
Position For Thermocouple Location
Position For Lubrication Of Bearing With W33 Groove
Lubrication Port For W33 Groove
Groove Bearing Drilled Standard On Pillow Blocks
Pre-Drilled And Tap Location For Vent Or Side Lubrication For Bearing Without W33
Groove
Dowel Pin Location For Metric Plummer Blocks
Drilling Location For Two Bolt Mounting Or Optional Dowel Pin Location
Optional Location For Dowel Pin Location
Drilling Location For Four Bolt Mounting Or Optional Dowel Pin Location
UNISPHERE II
Item
A
Bearing Reference
Guide
USAF Housing VS Seal Group Interchange Chart
All DODGE seals are identified as follows:
24
TT
211
Shaft Size in inches and 16ths

Seal Type
Seal Group
E-Family Roller
Bearings
Seal group numbers identify common housing seal grooves found on different series housings. The standard shaft sizes for various
housings are shown.
Shaft
Size
1-7/16
1-11/16
Specialty Tapered
Products
1-7/8
1-15/16
2-1/16
2-1/8
2-3/16
2-1/4
2-3/8
2-7/16
S-2000
2-1/2
2-5/8
2-9/16
2-11/16
2-3/4
UNISPHERE II
2-13/16
2-7/8
2-15/16
3
3-1/16
IMPERIAL
3-3/16
3-1/4
3-3/8
3-7/16
3-1/2
Housing
509
308
609
510
309
610
310
511
308
611
311
309
513
613
312
310
515
615
313
515
615
314
311
516
616
516
616
215
315
312
517
617
216
316
517
617
313
217
317
518
314
218
215
315
520
620
520
620
Seal*
Group
08
Shaft
Size
3-5/8
3-13/16
10
3-15/16
12
4
4-1/8
14
18
4-3/16
4-7/16
20
22
4-1/2
20
22
4-9/16
4-7/8
24
4-15/16
26
5
5-3/16
28
5-5/16
32
34
32
36
5-7/16
5-1/2
5-3/4
38
5-7/8
46
5-15/16
UNIFIED SAF
6
6-1/16
FEATURES/BENEFITS
PAGE B15-3
Housing
216
316
220
320
217
317
522
622
522
622
218
524
222
624
322
526
626
220
320
526
626
224
324
222
322
226
326
528
628
528
628
530
630
224
228
324
328
532
632
532
632
230
330
226
326
534
634
534
634
232
332
Seal*
Group
Shaft
Size
38
6-1/4
50
42
6-7/16
6-1/2
6-5/8
50
44
6-7/8
6-15/16
52
7
7-3/16
7-1/4
54
7-7/16
7-1/2
7-5/8
7-13/16
7-15/16
8
8-5/16
8-3/8
56
58
58
60
8-7/16
8-1/2
8-3/4
8-15/16
9
9-7/16
9-1/2
9-9/16
9-15/16
10
10-7/16
10-1/2
62
10-15/16
11
11-7/16
11-1/2
Housing
228
328
334
234
536
536
230
330
236
538
638
232
332
538
638
540
238
338
334
234
544S
240
236
544
Seal*
Group
66
12
68
70
72
12-15/16
13
13-7/16
13-1/2
13-15/16
14
15
15-3/4
Housing
064L
3164
3264
068
3168
3268
072
072L
3172
076
3176
080
084
B15-130
102
104
106
108
110
112
78
048
90
240
048
3248
052
3152
3252
244
82
56
92
NOMENCLATURE
PAGE B15-8
100
76
90
Seal groups in 200/300 housing require
two seals of different diameters.
84
94
96
98
64
PAGE B15-7
Seal*
Group
74
80
064
12-7/16
12-1/2
244
238
338
056L
3156
3256
060
3160
3260
Shaft
Size
11-15/16
SELECTION
PAGE B15-13
Bearing Reference
Guide
DODGE Cool Lube 2 System
Enhance your spherical roller bearing operation by continuous

oil cooling, filtration, and proper oil level maintenance while your
fan is running. Eighty percent of all mounted bearing failures are
caused by contamination and lubrication issues. The DODGE
Cool Lube System helps to minimize this risk.
Bearing Temperature Reduction: Increases bearing reliability

through bearing temperature reduction. Reducing bearing
operating temperatures is proven to significantly increase
roller bearing fatigue life.
Oil Filtration: Increases Bearing Life and extends maintenance
periods through continuous oil filtration. The DODGE Cool
Lube System continuously circulates and filters harmful
particles from the bearing oil sump.
Automatic Oil Level Control: The DODGE Cool Lube System
will maintain the proper oil level within the oil sump.
Cool Lube 2 System Specifications:

5 Gallon Tank with Removable Cover
Pump 2.0 GPM Flow
In-line Filter with Clog Indicator and Clog Auto-Bypass
3-way valve to change filter while unit is in operation
Pump Safety Relief Valve
Bearing Line Relief Valve
Filter and Bearing Supply Pressure Gauges
Air to Oil Heat Exchanger
S-2000
The DODGE Cool Lube System provides reduced maintenance

costs and increased uptime by providing:
Specialty Tapered
Products
E-Family Roller
Bearings
Custom Engineered for oil lubricated, mounted bearings on

fan applications. The DODGE Cool Lube System provides
an attractive and reliable alternative to conventional grease
and static oil bearing lubrication methods for industrial fan
applications. It is particularly suited for applications where
bearing operating temperatures and speeds approach maximum
permissible levels and for harsh and dirty environments.
Two Supply Line Needle Valves and Flow Meters with

flow range 0.05 to 0.50 GPM or 0.5 to 4.0 GPM
Oil Sight Gauge
Dodge Part Numbers with flow meter range of

0.05 to 0.50 GPM
Reservoir Breather Cap

Baldor NEMA Motor
- 063485 for three phase motor
All Components Mounted to a Base Plate
- 063486 for single phase motor

- 078327 for XP (Exp. Proof) three phase motor
Optional Features:
- 078328 for 575 VAC three phase motor
p/n 434725 260 watt x 120v Heater

p/n 434726 260 watt x 240v Heater
- 063487 for three phase motor
Oil Level Switch
- 063488 for single phase motor
Temperature/Oil Level Switch Assembly
- 078289 for XP (Exp. Proof) three phase motor
IMPERIAL
260 Watt Oil Heater with Thermostat sold separately.

If required order one of the following:
Dodge Part Numbers with flow meter range of

0.50 to 4.0 GPM
p/n 434941 (sold separately)
- 078290 for 575 VAC three phase motor
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-131
SELECTION
PAGE B15-13
UNIFIED SAF
Duplex Dual Filter Arrangement

NOTE: Replacement Filter Part Number 078358
FEATURES/BENEFITS
PAGE B15-3
UNISPHERE II
Temperature Gauge
One Cool Lube system for two (2) mounted bearings:
Bearing Reference
Guide
DODGE Cool Lube System helps to:
Prevent bearing mechanical distress:
Lower maintenance costs:
Lowers internal bearing friction

thus decreasing bearing
operating temperatures
Oil change outs are simple

No need to break housing cap bolts to clean out old grease
E-Family Roller
Bearings
Oil can be inspected for distress on a regular basis to

determine oil PM schedule
Minimizes roller to raceway,

metal to metal contact
Reduces roller skidding damage
that can occur in lightly loaded applications
Lower bearing temperatures increase service life

Lower contamination levels increase service life
Supplies lubricant directly to load carrying rolling elements

Increases lube life due to lower temperatures
Minimizes cage sliding friction wear
Once bearing raceway fatigue begins progression of damage is

rapid
Specialty Tapered
Products
Minimizes effect of ineffective sealing
Prevent bearing contamination:

Filters out contamination which has
passed through seals
Helps to remove water contamination
due to condensation from bearings if a
water absorbing filter is used
At first sign
of Damage
After
1,000 Hours
After
1,200 Hours
Flushes worn raceway, rollers & cage

particles from bearings
S-2000
Removes contamination caused during installation
UNISPHERE II
IMPERIAL
UNIFIED SAF
FEATURES/BENEFITS
PAGE B15-3
NOMENCLATURE
PAGE B15-8
PAGE B15-7
B15-132
SELECTION
PAGE B15-13
Plummer Blocks
CONTENTS
Plummer Blocks
Metric-Dimensioned Housings
Features/Benefits
ISNX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-14

SNX / SDX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-23
Nomenclature B16-6
Selection

Imperial Housing Style. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-7
ISN
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-8

ISN Plummer Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-12
ISNX Hydraulic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-18
Sleeve Bearings
ISN
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-3
ISN
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-13

ISN Bearing Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-16
ISNX Hydraulic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-18
ISN Lockplate Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-21
ISN End Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-21
Imperial Spanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-22
SLEEVOIL
Dimensions
SDX
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-42

SDXD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-46
Keyword Index
Part Number Index
Engineering
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1

Key Word Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEYWORD-1
Take-Up Frames
SNX
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16-26
B16-1
Plummer Blocks
CONTENTS
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
B16-2
Plummer Blocks
FEATURES/BENEFITS
ISN
Shaft Ready / Adapter Mount / SN Dimensions

Patented Adapter Mounting System
DODGE
ISN
Engineering
SNX
Dimensionally interchangeable with housings of the SN family.

Preassembled - no risk of bearing contamination during field
assembly or incorrect parts.
Stronger feet for higher load capacity.
Cast-in drilling location dimples: for dowels or four-bolt mounting.
Part Number Index
SNX
Keyword Index
ISN
Take-Up Frames
SLEEVOIL
Sleeve Bearings
Quick installation and removal in 15 minutes or less

Clearance setting without feeler gauges
Full shaft contact reduces or eliminates fretting corrosion
Locknut tightens the bearing on the shaft when turned
clockwise
Counter-clockwise rotation of the locknut loosens the bearing
from the shaft
22200 series spherical roller bearing with steel cage and
guide ring
B16-3
Plummer Blocks
FEATURES/BENEFITS
ISNX
Hydraulic Mount/Dismount with SN Dimensions

Patented Hydraulic Mount and Dismount System
Sleeve Bearings
Incorporates a hydraulic mount and dismount nut as a standard

feature on the inner unit for quicker installation and removal of bearing.
Totally sealed inner unit prevents contamination during installation
Harsh duty sealing system is functionally equivalent to a standard
Taconite seal
SN/SD dimensioned housing that matches ISO 113 standards
Incorporates standard 23144 thru 23176 double row spherical roller
bearings
150mm thru 360mm bore size
High strength ductile iron housing is standard
Incorporates a fixing ring for expansion/non-expansion capability
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
B16-4
Plummer Blocks
FEATURES/BENEFITS
Sleeve Bearings
ISN
Labyrinth Seal - Patented design clearance steel seal carrier

with corrosion resistant flingers.
SLEEVOIL
TRIDENT Seal - Patented design triple-lip rubbing seal with

corrosion resistant flingers; positive seal contact up
to 1 misalignment.
ISNX
Take-Up Frames
Triple Lip
Rubbing Seal
Keyword Index
Part Number Index
Engineering
LOR Seal
B16-5
Plummer Blocks
NOMENCLATURE
ISN BEARING NOMENCLATURE
Sleeve Bearings
P2B524 - ISN - 11OMFR

Housing Style Options:
M = Size in millimeters otherwise 1-10/16

Other Data / Seals:
F = non-expansion
L = expansion (non-locating)
R = Trident Rubbing Seal
S = Labyrinth Seal
HYD = Integral Hydraulic Mounting/Dismounting
P2B = Plummer Block, 2-Bolt Base, Cast Iron

F4B = Flange 4-Bolt, Cast Iron
SLEEVOIL
Housing Size:
5xx describes the associated DIN - SN Pillow block housing size
Bearing Type Options:

ISN, SN style w/Imperial locking mechanism
IP = Imperial Mount
ISAF- Imperial Mount SAF
ISNX HYD = Hydraulic Mount/Dismount
SNX = Plummer Block to 140 mm
SDX = Plummer Block to 320 mm
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-3
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-8
B16-6
DIMENSIONS
PAGE B16-13
Plummer Blocks
SELECTION
ISN
ISAF
35 - 140mm
35 - 125mm
1-1/4 - 5-1/2
1-7/16 - 7
ISNX HYD
ISAF HYD
150 - 360mm
140 - 380mm
Sleeve Bearings
IMPERIAL HOUSING STYLES
FEATURES/BENEFITS
PAGE B16-3
2-3/8 - 5-1/2
F4B
FC
35 - 100mm
35 - 125mm
1-7/16 - 3-15/16
1-1/8 - 5
WSTU
Insert / Lager
35 -100mm
35 - 140mm
1-1/8 - 4
1-1/8 - 7
EP2B
EP4B
35 -90mm
60 -125mm
1-3/8 - 3-1/2
2-1/4 - 5
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-7
B16-7
Engineering
35 - 140mm
1-1/8 - 4
Part Number Index
35 - 100mm
Take-Up Frames
P4B
DIMENSIONS
PAGE B16-13
Keyword Index
P2B
SLEEVOIL
5-7/16 - 15
Plummer Blocks
NOMENCLATURE
ISN RATINGS
Table 1: ISN Spherical Roller Bearings
Sleeve Bearings
Housing
Bearings
Maximum
Allowable
Adapter
Thrust
Basic Load Ratings

Dynamic
Capacity
(C)
Static
Capacity
(CO)
FA/FR e
e
X1
FA/FR > e
Y1
SLEEVOIL
Take-Up Frames
kN
kN
kN
507
22208
2,7
93
94
0,28
1,0
2,4
508
509
22209
3,1
93
105
0,26
1,0
2,6
510
22210
3,4
98
118
0,24
1,0
2,8
511
512
22211
4,1
120
145
0,23
1,0
2,9
513
22213
6,0
174
216
0,24
1,0
2,8
515
516
22215
7,0
185
236
0,22
1,0
3,1
517
518
22218
10,8
285
363
0,23
1,0
2,9
519
520
22220
13,8
369
463
0,24
1,0
2,8
522
524
22222
17,5
463
587
0,25
1,0
2,7
526
22226
25,0
650
872
0,26
1,0
2,6
528
530
22228
28.5
738
1050
0.25
1,0
2.7
532
22232
38.4
979
1401
0.26
1,0
2,6
Refer to pages B10-1 and B10-2 for information on bearing calculations, including L 10 life and loads
Maximum grease speed is dependant on load and ambient conditions. Consult Dodge Engineering.
Max. RPM
Y2
Trident
Seal
Labyrinth
Seal
0,67
3,6
3975
6000
3,18
0,67
3,9
3725
5600
3,18
0,67
4,2
3520
5300
6,35
0,67
0,67
4,3
4,2
3000
2400
4500
3800
6,35
6,35
0,67
4,6
2250
3400
6,35
0,67
4,3
1825
2600
6,35
0,67
4,2
1530
2200
7,94
0,67
4,0
1325
2000
9,53
0,67
4,0
1175
1800
9,53
0,67
0,68
4,0
3,9
1100
975
1700
1500
9,53
9,53
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-3
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-8
B16-8
Maximum
Expansion
X2
DIMENSIONS
PAGE B16-13
509
510
511
512
513
515
516
50
33
24
22
20
17
33
24
22
20
17
33
24
22
20
17
35
25
23
21
18
35
25
23
21
18
43
31
29
25
22
61
44
40
36
31
67
48
44
39
33
67
48
44
39
33
100 150 250 500 750 1000 1300 1500 1700 1800 2000
27
24
21
17
15
14
13
12
12
11
11
20
17
15
12
11
10
9
9
8
8
8
18
16
14
11
10
9
8
8
8
8
7
16
14
12
10
9
8
7
7
7
7
6
14
12
10
8
7
7
6
6
6
6
6
27
24
21
17
15
14
13
12
12
11
11
20
17
15
12
11
10
9
9
8
8
8
18
16
14
11
10
9
8
8
8
8
7
16
14
12
10
9
8
7
7
7
7
6
14
12
10
8
7
7
6
6
6
6
6
27
24
21
17
15
14
13
12
12
11
11
20
17
15
12
11
10
9
9
8
8
8
18
16
14
11
10
9
8
8
8
8
7
16
14
12
10
9
8
7
7
7
7
6
14
12
10
8
7
7
6
6
6
6
6
29
25
22
18
16
14
13
13
12
12
12
21
18
16
13 11
10
10
9
9
9
8
19
17
14
12
10
10
9
8
8
8
8
17
15
13
10
9
8
8
7
7
7
7
14
13
11
9
8
7
7
6
6
6
6
29
25
22
18
16
14
13
13
12
12
12
21
18
16
13
11
10
10
9
9
9
8
19
17
14
12
10
10
9
8
8
8
8
17
15
13
10
9
8
8
7
7
7
7
14
13
11
9
8
7
7
6
6
6
6
35
31
27
22
19
18
16
16
15
15
14
25
22
19
16
14
13
12
11
11
11
10
23
21
18
14
13
12
11
10
10
10
9
21
18
16
13
11
10
10
9
9
9
8
18
16
13
11
10
9
8
8
8
7
7
50
44
38
31
27
25
23
22
21
21
20
36
32
27
22
19
18
17
16
15
15
15
33
29
25
20
18
16
15
15
14
14
13
29
26
22
18
16
15
13
13
12
12
12
25
22
19
15
14
12
12
11
11
10
10
54
48
41
33
30
27
25
24
23
23
22
39
34
30
24
21
20
18
17
17
16
16
36
32
27
22
20
18
17
16
15
15
15
32
28
24
20
17
16
15
14
14
13
13
27
24
21
17
15
14
13
12
12
11
11
54
48
41
33
30
27
25
24
23
23
22
39
34
30
24
21
20
18
17
17
16
16
36
32
27
22
20
18
17
16
15
15
15
32
28
24
20
17
16
15
14
14
13
13
27
24
21
17
15
14
13
12
12
11
11
2200 2600 2750 3000 3400 3800 4500 5300 5600 6000
11
10
10
10
7
6
9
8
8
8
8
7
7
7
7
6
6
6
6
6
7
7
7
6
6
6
6
5
5
5
6
6
6
6
6
5
5
5
5
5
5
5
5
5
5
5
4
4
4
4
11
10
10
10
7
6
9
8
8
8
8
7
7
7
7
6
6
6
6
6
7
7
7
6
6
6
6
5
5
5
6
6
6
6
6
5
5
5
5
5
5
5
5
5
5
5
4
4
4
4
11
10
10
10
7
9
9
6
8
8
7
7
7
7
8
6
6
6
7
7
7
6
6
6
6
5
5
6
6
6
6
6
5
5
5
5
5
5
5
5
5
5
4
4
4
11
11
11
10
7
10
9
9
8
8
8
7
7
7
7
6
8
7
7
7
7
6
6
6
7
6
6
6
6
6
5
5
6
5
5
5
5
5
5
4
11
11
11
10
7
10
9
9
8
8
8
7
7
7
7
6
8
7
7
7
7
6
6
6
7
6
6
6
6
6
5
5
6
5
5
5
5
5
5
4
14
13
13
9
12
12
11
10
10
9
9
9
9
8
9
9
9
8
8
8
7
8
8
8
7
7
7
7
7
7
7
6
6
6
6
14
19
18
18
17
17
14
13
13
13
12
12
13
12
12
12 113 11
11
11
11
10
10
10
10
9
9
9
9
8
15
20
20
19
19
15
15
14
14
14
14
13
13
13
12
13
12
12
11
11
11
10
10
10
9
15
20
20
19
19
15
15
14
14
14
14
13
13
13
12
13
12
12
11
11
11
10
10
10
9
Use the labyrinth (S) seal for applications to the right of the vertical line.
For applications in the Dark shaded areas, the maximum load for the specific speed is shown. The load does not correspond to the L10 shown.
Applications in the Light shaded areas may require high temperature lubrication. Please consult DODGE Engineering.
FEATURES/BENEFITS
PAGE B16-3
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-8
B16-9
DIMENSIONS
PAGE B16-13
SLEEVOIL
508
Allowable Equivalent Radial Load Rating (kN) at Various RPM
Take-Up Frames
507
L10
Life
Hours
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
10000
30000
40000
60000
100000
Engineering
Housing
Part Number Index
Table 2: ISN Double Row Spherical Roller Bearing
Keyword Index
ISN EASY SELECTION
Sleeve Bearings
Plummer Blocks
NOMENCLATURE
Plummer Blocks
NOMENCLATURE
ISN EASY SELECTION
Table 2: ISN Double Row Spherical Roller Bearing (continued)
L10
Allowable Equivalent Radial Load Rating (kN) at Various RPM
Life
50 100 150 250 500 750 1000 1300 1500 1700 1800 2000 2200 2600 2750 3000 3400 3800 4500 5300 5600 6000
Hours
10000
67
54
48
41
33
30
27
25
24
23
23
22
15
20
20
19
19
30000
48
39
34
30
24
21
20
18
17
17
16
16
15
15
14
14
14
517
40000
44
36
32
27
22
20
18
17
16
15
15
15
14
13
13
13
12
60000
39
32
28
24
20
17
16
15
14
14
13
13
13
12
12
11
11
100000
33
27
24
21
17
15
14
13
12
12
11
11
11
10
10
10
9
10000
105 85
76
65
53
47
43
40
38
37
26
35
34
32
30000
76
61
54
47
38
34
31
28
27
26
26
25
24
23
518
40000
69
56
50
43
35
31
28
26
25
24
24
23
22
21
60000
61
50
44
38
31
27
25
23
22
21
21
20
20
19
100000
53
43
38
33
26
23
21
20
19
18
18
17
17
16
10000
105 85
76
65
53
47
43
40
38
37
26
35
34
32
30000
76
61
54
47
38
34
31
28
27
26
26
25
24
23
519
40000
69
56
50
43
35
31
28
26
25
24
24
23
22
21
60000
61
50
44
38
31
27
25
23
22
21
21
20
20
19
100000
53
43
38
33
26
23
21
20
19
18
18
17
17
16
10000
133 108 96
82
67
59
54
50
35
46
45
44
43
30000
96
78
69
59
48
43
39
36
35
33
33
32
31
520
40000
88
71
63
54
44
39
36
33
32
31
30
29
28
60000
78
63
56
48
39
35
32
29
28
27
27
26
25
100000
67
54
48
41
33
30
27
25
24
23
23
22
21
10000
133 108 96
82
67
59
54
50
35
46
45
44
43
30000
96
78
69
59
48
43
39
36
35
33
33
32
31
522
40000
88
71
63
54
44
39
36
33
32
31
30
29
28
60000
78
63
56
48
39
35
32
29
28
27
27
26
25
100000
67
54
48
41
33
30
27
25
24
23
23
22
21
10000
167 135 120 103 84
74
68
45
60
58
57
55
30000
120 97
86
74
60
53
49
45
43
42
41
40
524
40000
110 89
79
68
55
49
45
41
40
38
38
36
60000
97
79
70
60
49
43
40
37
35
34
33
32
100000
84
68
60
52
42
37
34
31
30
29
29
28
10000
234 190 168 144 117 104 69
88
84
81
80
30000
168 137 121 104 84
75
69
63
61
59
58
526
40000
154 125 111 95
77
69
63
58
56
54
53
60000
137 111 98
84
69
61
56
52
49
48
47
100000
117 95
84
72
59
52
48
44
42
41
40
10000
234 190 168 144 117 104 69
88
84
81
80
30000
168 137 121 104 84
75
69
63
61
59
58
528
40000
154 125 111 95
77
69
63
58
56
54
53
60000
137 111 98
84
69
61
56
52
49
48
47
100000
117 95
84
72
59
52
48
44
42
41
40
10000
266 216 191 164 133 118 78 100 96
92
30000
191 155 138 118 96
85
78
72
69
66
530
40000
176 143 126 108 88
78
71
66
63
61
60000
155 126 112 96
78
69
63
59
56
54
100000
133 108 96
82
67
59
54
50
48
46
10000
353 287 254 218 177 113 144 133 127
30000
254 206 182 157 127 113 103 95
91
532
40000
233 189 167 144 117 103 95
88
84
60000
206 167 148 127 103 91
84
78
74
100000
177 144 127 109 89
78
72
67
64
Use the labyrinth (S) seal for applications to the right of the vertical line.
For applications in the Dark shaded areas, the maximum load for the specific speed is shown. The load does not correspond to the L10 shown.
Applications in the Light shaded areas may require high temperature lubrication. Please consult DODGE Engineering.
Housing
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-3
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-8
B16-10
DIMENSIONS
PAGE B16-13
Plummer Blocks
NOMENCLATURE
IMPERIAL - ISN Spherical Roller Bearings
LOW SPEED
MEDIUM SPEED
HIGH SPEED
LIGHT LOAD
NORMAL LOAD
OVER 8% TO 18% OF C
HEAVY LOAD
OVER 18% OF C
Sleeve Bearings
Table 4: Definition Of Operating Conditions

For Unitized Spherical Roller Bearings
OVER -7C to 93C
HIGH TEMPERATURE
OVER 93C to 122C
FEATURES/BENEFITS
PAGE B16-3
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-8
B16-11
DIMENSIONS
PAGE B16-13
Keyword Index
Part Number Index
Engineering
Take-Up Frames
-73C to -7C
MEDIUM TEMPERATURE
SLEEVOIL
C- DYNAMIC CAPACITY
LOW TEMPERATURE
Plummer Blocks
SELECTION
ISN PLUMMER BLOCKS WITH TRIDENT SEALS
Fixed bearing
Expansion Bearing
Shaft
Part No.
Description
Part No.
Description
3 0mm
071000
P2B507-ISN-030MFR
071017
P2B507-ISN-030MLR
507
1-1/8
747900
P2B507-ISN-102 FR
747904
P2B507-ISN-102 LR
1-3/16
747901
P2B507-ISN-103FR
747905
P2B507-ISN-103 LR
3 5mm
071001
P2B508-ISN-035MFR
071018
P2B508-ISN-035MLR
508
1-1/4
747908
P2B508-ISN-104 FR
747912
P2B508-ISN-104 LR
1-3/8
747909
P2B508-ISN-106 FR
747913
P2B508-ISN-106 LR
4 0mm
071002
P2B509-ISN-040MFR
071019
P2B509-ISN-040MLR
509
1-7/16
747916
P2B509-ISN-107 FR
747920
P2B509-ISN-107 LR
1-1/2
747917
P2B509-ISN-108 FR
747921
P2B509-ISN-108 LR
4 5mm
071003
P2B510-ISN-045MFR
071020
P2B510-ISN-045MLR
1-11/16
747924
P2B510-ISN-111 FR
747928
P2B510-ISN-111 LR
510
1-3/4
747925
P2B510-ISN-112 FR
747929
P2B510-ISN-112 LR
5 0mm
071004
P2B511-ISN-050MFR
071021
P2B511-ISN-050MLR
511
1-15/16
747932
P2B511-ISN-115 FR
747936
P2B511-ISN-115 LR
2
747933
P2B511-ISN-200 FR
747937
P2B511-ISN-200 LR
55mm
071005
P2B512-ISN-055MFR
071022
P2B512-ISN-055MLR
512
2-1/8
748012
P2B512-ISN-202 FR
748013
P2B512-ISN-202 LR
60mm
071006
P2B513-ISN-060MFR
071023
P2B513-ISN-060MLR
513
2-3/16
747940
P2B513-ISN-203 FR
747944
P2B513-ISN-203 LR
2-1/4
747941
P2B513-ISN-204 FR
747945
P2B513-ISN-204 LR
6 5mm
071007
P2B515-ISN-065MFR
071024
P2B515-ISN-065MLR
515
2-7/16
747948
P2B515-ISN-207 FR
747952
P2B515-ISN-207 LR
2-1/2
747949
P2B515-ISN-208 FR
747953
P2B515-ISN-208 LR
7 0mm
071008
P2B516-ISN-070MFR
071025
P2B516-ISN-070MLR
516
2-11/16
747956
P2B516-ISN-211 FR
747960
P2B516-ISN-211 LR
2-3/4
747957
P2B516-ISN-212 FR
747961
P2B516-ISN-212 LR
7 5mm
071009
P2B517-ISN-075MFR
071026
P2B517-ISN-075MLR
517
2-15/16
747964
P2B517-ISN-215 FR
747968
P2B517-ISN-215 LR
3
747965
P2B517-ISN-300 FR
747969
P2B517-ISN-300 LR
8 0mm
071010
P2B518-ISN-080MFR
071027
P2B518-ISN-080MLR
518
3-3/16
747972
P2B518-ISN-303 FR
747976
P2B518-ISN-303 LR
3-1/4
747973
P2B518-ISN-304 FR
747977
P2B518-ISN-304 LR
519
85mm
071011
P2B519-ISN-085MFR
071028
P2B519-ISN-085MLR
90mm
071012
P2B520-ISN-090MFR
071029
P2B520-ISN-090MLR
520
3-7/16
747980
P2B520-ISN-307 FR
747984
P2B520-ISN-307 LR
3-1/2
747981
P2B520-ISN-308 FR
747985
P2B520-ISN-308 LR
10 0mm
071013
P2B522-ISN-100MFR
071030
P2B522-ISN-100MLR
522
3-15/16
747988
P2B522-ISN-315 FR
747992
P2B522-ISN-315 LR
4
747989
P2B522-ISN-400 FR
747993
P2B522-ISN-400 LR
524
110mm
071014
P2B524-ISN-110MFR
071031
P2B524-ISN-110MLR
115mm
071015
P2B526-ISN-115MFR
071032
P2B526-ISN-115MLR
4-7/16
747996
P2B526-ISN-407 FR
748000
P2B526-ISN-407 LR
526
4-1/2
747997
P2B526-ISN-408 FR
748001
P2B526-ISN-408 LR
12 5mm
071016
P2B528-ISN-125MFR
071033
P2B528-ISN-125MLR
528
4-15/16
748004
P2B528-ISN-415 FR
748008
P2B528-ISN-415 LR
5
748005
P2B528-ISN-500 FR
748009
P2B528-ISN-500 LR
530
135mm
071102
P2B530-ISN-135MFR
071103
P2B530-ISN-135MLR
532
140
071106
P2B532-ISN-140MFR
071107
P2B532-ISN-140MLR
F = Non-Expansion, L = Expansion, R = Trident Rubbing Seal;. S = Labyrinth Seal
Series
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-3
NOMENCLATURE
PAGE B16-6
Hsg / Insert
Pt #
071983
071983
071983
071984
071984
071984
071985
071985
071985
071986
071986
071986
071987
071987
071987
071988
071988
071989
071989
071989
071990
071990
071990
071991
071991
071991
071991
071991
071991
071992
071992
071992
071993
071994
071994
071994
071995
071995
071995
071996
071997
071997
071997
071998
071998
071998
Description
ISN 507-22208 FR
ISN 507-22208 FR
ISN 507-22208 FR
ISN 508-22208 FR
ISN 508-22208 FR
ISN 508-22208 FR
ISN 509-22209 FR
ISN 509-22209 FR
ISN 509-22209 FR
ISN 510-22210 FR
ISN 510-22210 FR
ISN 510-22210 FR
ISN 511-22210 FR
ISN 511-22210 FR
ISN 511-22210 FR
ISN 512-22211 FR
ISN 512-22211FR
ISN 513-22213 FR
ISN 513-22213 FR
ISN 513-22213 FR
ISN 515-22215 FR
ISN 515-22215 FR
ISN 515-22215 FR
ISN 516/517-22215 FR
ISN 516/517-22215 FR
ISN 516/517-22215 FR
ISN 516/517-22215 FR
ISN 516/517-22215 FR
ISN 516/517-22215 FR
ISN 518-22218 FR
ISN 518-22218 FR
ISN 518-22218 FR
ISN 519-22218 FR
ISN 520-22220 FR
ISN 520-22220 FR
ISN 520-22220 FR
ISN 522-22220 FR
ISN 522-22220 FR
ISN 522-22220 FR
ISN 524-22222 FR
ISN 526-22226 FR
ISN 526-22226 FR
ISN 526-22226 FR
ISN 528-22226 FR
ISN 528-22226 FR
ISN 528-22226 FR
SELECTION
PAGE B16-12
B16-12
Sleeve
Pt #
744975
069286
069287
744976
069288
069289
744977
064153
064154
744978
064155
064156
744979
069296
069297
744980
064157
744981
064070
064071
744982
064072
064073
744983
069303
069304
744984
069305
069306
744985
069307
069308
744986
744987
064074
064075
744988
069312
069313
744989
744990
064076
064077
744991
069316
069317
071114
071115
Description
ADPTR-IP-22208-30M
ADPTR-IP-22208-102
ADPTR-IP-22208-103
ADPTR-IP-22208-35M
ADPTR-IP-22208-104
ADPTR-IP-22208-106
ADPTR-ISN-22209-40M
ADPTR-ISN-22209-107
ADPTR-ISN-22209-108
ADPTR-IP-22210-45M
ADPTR-ISN-22210-111
ADPTR-ISN-22210-112
ADPTR-IP-22210-50M
ADPTR-IP-22210-115
ADPTR-IP-22210-200
ADPTR-IP-22211-055M
ADPTR-ISN-22211-202
ADPTR-IP-22213-60M
ADPTR-ISN-22213-203
ADPTR-ISN-22213-204
ADPTR-IP-22215-65M
ADPTR-ISN-22215-207
ADPTR-ISN-22215-208
ADPTR-IP-22215-70M
ADPTR-IP-22215-211
ADPTR-IP-22215-212
ADPTR-IP-22215-75MM
ADPTR-IP-22215-215
ADPTR-IP-22215-300
ADPTR-IP-22218-80M
ADPTR-IP-22218-303
ADPTR-IP-304
ADPTR-IP-22218-85M
ADPTR-IP-22220-090MM
ADPTR-ISN-22220-307
ADPTR-ISN-22220-308
ADPTR-IP-22220-315
ADPTR-IP-22220-400
ADPTR-ISN-22226-407
ADPTR-ISN-22226-408
ADPTR-IP-22226-415
ADPTR-IP-22226-500
ADPTR-IP-22228-135M
ADPTR-IP-22230-140M
DIMENSIONS
PAGE B16-13
Plummer Blocks
SELECTION
ISN DIMENSIONS
NOTE:
All sizes
NOTE: All sizes
use a use a
1/8.28
NPT
hydraulic
1/8-27 NPT
hydraulic
grease
fitting
grease fitting
G
Sleeve Bearings
J
F
M
H
D MIN
D MAX
B
S
CL
CL
HSG
Y
MAX
HSG
SLEEVOIL
Z
MIN
A
66.7
66.7
71.4
72.6
72.6
77.0
86.9
88.9
B
184.9
205.9
206.3
204.9
253.9
253.9
274.9
280.1
C
52.0
60.2
60.2
60.2
70.2
69.9
80.2
80.1
Min
145.0
150.0
155.0
160.0
190.0
190.0
205.0
215.0
Max
155.0
174.6
174.6
175.0
215.9
216.0
235.0
236.0
F
Bolt
Dia
M12
M12
M12
M12
M16
M16
M16
M16
88.9
315.9
90.2
244.5
268.3
M20
34.1
32.0
176.0
106.7
95.0
31.4
57.5
7.0
106.0
106.0
120.0
120.0
133.0
152.0
152.0
156.8
179.8
345.3
345.0
379.8
410.0
410.0
444.8
500.0
539.8
560.0
110.3
100.2
110.2
120.0
120.0
130.0
150.2
159.8
160.0
270.0
264.2
292.8
314.4
314.5
359.6
400.0
443.0
463.0
293.7
296.1
327.0
356.0
356.0
387.0
427.0
457.0
477.0
M20
M20
M24
M24
M24
M24
M30
M30
M30
34.0
37.9
43.1
46.8
46.8
41.7
48.5
42.0
42.0
35.0
35.0
40.0
45.0
45.0
50.0
50.0
60.0
60.0
196.7
205.2
218.3
239.0
260.7
292.8
290.4
312.5
345.3
124.7
124.7
138.7
138.7
161.3
191.8
191.8
222.2
260.4
100.0
112.0
112.0
125.0
140.0
150.0
150.0
160.0
170.0
37.7
37.7
41.7
41.7
44.5
48.4
48.4
51.8
62.4
68.3
68.3
77.8
77.8
88.5
103.6
103.6
105.0
117.4
7.0
7.0
8.0
8.0
10.0
10.0
10.0
16.3
16.8
FEATURES/BENEFITS
PAGE B16-3
G
20.0
27.3
24.8
22.5
31.0
31.0
33.0
28.5
H
22.0
25.0
25.0
25.0
28.0
30.0
30.0
30.0
J
100.9
110.8
114.0
113.8
124.5
130.3
152.4
156.0
L
67.6
67.6
74.7
81.0
81.0
87.1
96.5
106.7
M
50.0
60.0
60.0
60.0
70.0
70.0
80.0
80.0
R
22.6
22.6
20.6
21.8
21.8
23.0
30.6
31.4
S
44.1
44.1
50.8
50.8
50.8
54.0
56.3
57.5
X
Total
Expansion
4.0
4.0
6.5
6.5
6.5
7.0
7.0
7.0
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-12
B16-13
DIMENSIONS
PAGE B16-13
Engineering
Part Number Index
C
NON-EXPANSION
Keyword Index
Series
507
508
509
510
511
512
513
515
516
517
518
519
520
522
524
526
528
530
532
C
EXPANSION
Take-Up Frames
Shaft
Size
mm
30
35
40
45
50
55
60
65
70
75
80
85
90
100
110
115
125
135
140
Plummer Blocks
SELECTION
ISN PLUMMER BLOCKS WITH LABYRINTH SEALS
Sleeve Bearings
Series
507
508
509
510
511
512
513
515
SLEEVOIL
Take-Up Frames
516
517
518
519
520
522
524
526
528
530
532
Shaft
30mm
35mm
40mm
1-1/2"
45mm
50mm
55mm
60mm
2-3/16"
2-1/2"
65mm
2-1/2
70mm
75mm
80mm
85mm
90mm
100mm
110mm
115mm
125mm
135mm
140mm
Part No.
071034
071035
071036
075154
071037
071038
071039
071040
077481
071041
074989
071042
071043
071044
071045
071046
071047
071048
071049
071050
071104
071108
30 Through 140mm, 2-Bolt

Fixed Bearing Description
P2B507-ISN-030MFS
P2B508-ISN-035MFS
P2B509-ISN-040MFS
P2B509-ISN-108 FS
P2B510-ISN-045MFS
P2B511-ISN-050MFS
P2B512-ISN-055MFS
P2B513-ISN-060MFS
P2B513-ISN-203 FS
P2B515-ISN-065MFS
P2B515-ISN-208 FS
P2B516-ISN-070MFS
P2B517-ISN-075MFS
P2B518-ISN-080MFS
P2B519-ISN-085MFS
P2B520-ISN-090MFS
P2B522-ISN-100MFS
P2B524-ISN-110MFS
P2B526-ISN-115MFS
P2B528-ISN-125MFS
P2B530-ISN-135MFS
P2B532-ISN-140MFS
Part No.
071051
071052
070053
Exp. Bearing Description

P2B507-ISN-030MLS
P2B508-ISN-035MLS
P2B509-ISN-040MLS
071054
071055
071056
071057
P2B510-ISN-045MLS
P2B511-ISN-050MLS
P2B512-ISN-055MLS
P2B513-ISN-060MLS
076670
071058
P2B513-ISN-208-LS
P2B515-ISN-065MLS
071059
071060
071061
071062
071063
071064
071065
071066
071067
071105
071109
P2B516-ISN-070MLS
P2B517-ISN-075MLS
P2B518-ISN-080MLS
P2B519-ISN-085MLS
P2B520-ISN-090MLS
P2B522-ISN-100MLS
P2B524-ISN-110MLS
P2B526-ISN-115MLS
P2B528-ISN-125MLS
P2B530-ISN-135MLS
P2B532-ISN-140MLS
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-3
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-12
B16-14
DIMENSIONS
PAGE B16-13
Plummer Blocks
DIMENSIONS
ISN PLUMMER BLOCK DIMENSIONS
grease fitting
Sleeve Bearings
G
J
F
M
H
D MIN
D MAX
S
CL
CL
HSG
SLEEVOIL
Y
MAX
HSG
Z
MIN
C
NON-EXPANSION
D
A
66.7
66.7
71.4
72.6
72.6
77.0
86.9
88.9
B
184.9
205.9
206.3
204.9
253.9
253.9
274.9
280.1
C
52.0
60.2
60.2
60.2
70.2
69.9
80.2
80.1
Min
145.0
150.0
155.0
160.0
190.0
190.0
205.0
215.0
Max
155.0
174.6
174.6
175.0
215.9
216.0
235.0
236.0
F
Bolt
Dia
M12
M12
M12
M12
M16
M16
M16
M16
88.9
315.9
90.2
244.5
268.3
M20
34.1
32.0
176.0
106.7
95.0
31.4
57.5
7.0
106.0
106.0
120.0
120.0
133.0
152.0
152.0
156.8
179.8
345.3
345.0
379.8
410.0
410.0
444.8
500.0
539.8
560.0
100.3
100.2
110.2
120.0
120.0
130.0
150.2
159.8
160.0
270.0
264.2
292.8
314.4
314.5
359.6
400.0
443.0
463.0
293.7
296.1
327.0
356.0
356.0
387.0
427.0
457.0
477.0
M20
M20
M24
M24
M24
M24
M30
M30
M30
34.0
37.9
43.1
46.8
46.8
41.7
48.5
42.0
42.0
35.0
35.0
40.0
45.0
45.0
50.0
50.0
60.0
60.0
196.7
205.2
218.3
239.0
260.7
292.8
290.4
312.5
345.3
124.7
124.7
138.7
138.7
161.3
191.8
191.8
222.2
260.4
100.0
112.0
112.0
125.0
140.0
150.0
150.0
160.0
170.0
37.7
37.7
41.7
41.7
44.5
48.4
48.4
51.8
62.4
68.3
68.3
77.8
77.8
88.5
103.6
103.6
105.0
117.4
7.0
7.0
8.0
8.0
10.0
10.0
10.0
16.3
16.8
FEATURES/BENEFITS
PAGE B16-3
G
20.0
27.3
24.8
22.5
31.0
31.0
33.0
28.5
H
22.0
25.0
25.0
25.0
28.0
30.0
30.0
30.0
J
100.9
110.8
114.0
113.8
124.5
130.3
152.4
156.0
L
67.6
67.6
74.7
81.0
81.0
87.1
96.5
106.7
M
50.0
60.0
60.0
60.0
70.0
70.0
80.0
80.0
R
22.6
22.6
20.6
21.8
21.8
23.0
30.6
31.4
S
44.1
44.1
50.8
50.8
50.8
54.0
56.3
57.5
X
Total
Expansion
4.0
4.0
6.5
6.5
6.5
7.0
7.0
7.0
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-12
B16-15
DIMENSIONS
PAGE B16-13
Part Number Index
C
EXPANSION
Engineering
Take-Up Frames
Keyword Index
Series
507
508
509
510
511
512
513
515
516
517
518
519
520
522
524
526
528
530
532
Shaft
Size
mm
30
35
40
45
50
55
60
65
70
75
80
85
90
100
110
115
125
135
140
A
L
Plummer Blocks
DIMENSIONS
ISN BEARING INSERTS
Metric Sizes 30-170 mm
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-3
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-12
B16-16
DIMENSIONS
PAGE B16-16
Plummer Blocks
DIMENSIONS
ISN BEARING INSERTS
Dimensions in mm
Part Number
Description
Part Number
Description
30
071068
INS-ISN-30MR
071085
INS-ISN-30MS
35
071069
INS-ISN-35MR
071086
INS-ISN-35MS
40
071070
INS-ISN-40MR
071087
INS-ISN-40MS
45
071071
INS-ISN-45MR
071088
INS-ISN-45MS
50
071072
INS-ISN-50MR
071089
INS-ISN-50MS
80.0
24.0
66.7
24.6
67.6
85.0
24.0
71.4
24.2
74.7
90.0
24.0
72.6
24.8
81.0
55
071073
INS-ISN-55MR
071090
INS-ISN-55MS
100.0
26.3
77.0
26.7
87.1
60
071074
INS-ISN-60MR
071091
INS-ISN-60MS
120.0
32.3
86.9
30.7
96.5
65
071075
INS-ISN-65MR
071092
INS-ISN-65MS
70
071076
INS-ISN-70MR
071093
INS-ISN-70MS
130.0
32.3
88.9
31.0
106.7
75
071077
INS-ISN-75MR
071094
INS-ISN-75MS
80
071078
INS-ISN-80MR
071095
INS-ISN-80MS
85
071079
INS-ISN-85MR
071096
INS-ISN-85MS
160.0
41.3
106.3
37.7
124.7
90
071080
INS-ISN-90MR
071097
INS-ISN-90MS
100
071081
INS-ISN-100MR
071098
INS-ISN-100MS
180.0
47.3
120.0
41.8
138.7
110
071082
INS-ISN-110MR
071099
INS-ISN-110MS
200.0
54.8
133.0
49.1
161.3
115
071083
INS-ISN-115MR
071100
INS-ISN-115MS
125
071084
INS-ISN-125MR
071101
INS-ISN-125MS
230.0
65.8
152.0
53.5
191.8
135
071116
INS-ISN-135MR
071117
INS-ISN-135MS
250.0
69.9
156.8
59.4
222.2
140
071118
INS-ISN-140MR
071119
INS-ISN-140MS
150
079991
INS-ISN-150MR
290.0
81.8
179.8
70.3
260.4
160
079992
INS-ISN-160MR
170
079993
INS-ISN-170MR
320.0
88.1
187.7
72.7
289.7
FEATURES/BENEFITS
PAGE B16-3
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-12
B16-17
DIMENSIONS
PAGE B16-16
Engineering
Labyrinth Seal
Part Number Index
Contact Seal
Keyword Index
Shaft
Size
mm
Take-Up Frames
SLEEVOIL
Sleeve Bearings
Metric Sizes 30-170 mm
Plummer Blocks
DIMENSIONS
ISNX Pillow Block Hydraulic
Table 5: Spherical Roller Bearings
23100K Series
Sleeve Bearings
Shaft Size
Adapter
Mounted
Inches
FA/FR e
Bearing
Series
FA/FR>e
Y
SLEEVOIL
Take-Up Frames
Adapter
Maximum
Allowable
Thrust Load
kN
Dynamic
Capacity
(C)
kN
Static
Capacity (Co)
kN
Maximum
RPM
45
52
59
67
79
92
1032
1201
1357
1335
1624
1846
1668
1913
2180
2269
2914
3269
1300
1200
1100
900
800
750
89
2180
4003
670
123
2358
4359
630
144
2669
4938
600
169
3203
5961
530
194
3692
6939
500
203
3781
7384
480
221
4070
8140
450
Engineering
150mm
23134K
.28
1
2.40
.67
3.50
160mm
23136K
.29
1
2.30
.67
3.50
170mm
23138K
.30
1
2.30
.67
3.40
180mm
23140K
.35
1
2.00
.67
2.90
200mm
23144K
.33
1
2.00
.67
3.00
220mm
23148K
.33
1
2.10
.67
3.10
9-7/16
9-1/2
23152K
.33
1
2.00
.67
3.00
240mm
10-7/16
10-1/2
23156K
.32
1
2.10
.67
3.20
260mm
10-15/16
11
23160K
.33
1
2.10
.67
3.10
280mm
11-15/16
12
23164K
.34
1
2.00
.67
2.90
300mm
12-7/16
12-1/2
23168K
.34
1
2.00
.67
2.90
320mm
13-7/16
13-1/2
23172K
.33
1
2.10
.67
3.10
340mm
13-15/16
14
23176K
.32
1
2.10
.67
3.20
360mm
23100K series bearings will be provided with metric housings only.
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B16-4
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-18
B16-18
DIMENSIONS
PAGE B16-18
23134K
1300
160mm
3136
23136K
1200
170mm
3138
23138K
1100
180mm
3140
23140K
900
200mm
3144
23144K
800
220mm
3148
23148K
750
3152
23152K
670
3156
23156K
630
3160
23160K
600
3164
23164K
530
3168
23168K
500
3172
23172K
480
3176
23176K
450
9-7/16
9-1/2
240mm
10-7/16
10-1/2
260mm
10-15/16
11
280mm
11-15/16
12
300mm
12-7/16
12-1/2
320mm
13-7/16
13-1/2
340mm
13-15/16
14
360mm
FEATURES/BENEFITS
PAGE B16-4
100
150
200
250
230
199
186
267
232
217
302
262
245
297
258
241
361
314
293
411
357
334
485
421
394
524
455
426
594
419
482
712
619
579
821
713
667
841
730
683
905
786
735
186
162
151
217
188
176
245
213
199
241
209
196
293
255
238
334
290
271
394
342
320
426
370
346
482
419
392
579
503
470
667
579
542
683
593
555
735
639
597
165
143
134
192
167
156
217
188
176
213
185
173
260
226
211
295
256
240
349
303
283
377
328
297
427
371
347
512
445
416
591
513
480
605
525
491
651
565
529
23100K Series
151
142
132
123
123
115
176
165
153
143
143
134
199
186
173
162
162
151
196
183
170
159
159
149
238
223
207
194
194
181
271
253
235
220
220
206
320
299
278
260
260
243
346
324
300
281
281
263
392
366
340
318
318
298
470
440
408
382
382
268
542
507
471
440
431
412
555
519
482
451
451
421
597
559
519
485
485
454
NOMENCLATURE
PAGE B16-6
300
400
500
550
600
650
700
750
950
1300
134
116
109
156
136
127
176
153
143
173
151
141
211
183
171
240
208
195
283
246
230
306
266
249
347
301
282
416
361
338
480
417
390
491
427
310
529
459
430
123
107
100
143
124
116
162
140
131
159
138
129
194
168
157
220
191
179
260
226
211
281
244
228
318
276
258
382
332
310
440
382
357
451
391
366
485
421
394
115
200
93
134
116
109
151
131
123
149
129
121
181
157
147
206
179
167
243
211
197
263
228
213
298
258
242
357
310
390
412
357
334
421
277
342
454
394
368
112
97
91
130
113
106
147
128
119
145
126
117
176
153
143
200
174
162
236
205
192
255
222
207
289
251
235
347
301
282
400
347
325
410
356
333
441
383
358
109
95
88
127
110
103
143
124
116
141
122
114
171
149
139
195
169
158
230
200
187
249
216
202
282
245
229
338
294
275
301
338
316
399
347
323
106
92
86
124
107
101
140
121
114
137
119
112
167
145
136
190
165
154
225
195
182
243
211
197
275
239
223
330
287
268
104
90
84
121
105
98
137
119
111
134
117
109
164
142
133
186
162
151
220
191
178
238
206
193
269
234
218
102
88
83
119
103
96
134
116
109
132
114
107
160
139
130
182
158
148
215
187
175
233
202
189
263
229
205
95
82
77
110
96
90
125
108
101
123
107
100
86
75
70
101
87
82
114
99
92
SELECTION
PAGE B16-18
B16-19
Engineering
3134
50
Part Number Index
150mm
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
60,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
50,000
80,000
100,000
Allowable Equivalent Radial Load Rating (kN) AT VARIOUS RPM
DIMENSIONS
PAGE B16-18
Keyword Index
Max
Housing Bearing RPM
L10
Designation Series Grease Hours
Life
Shaft
Size
SLEEVOIL
Table 6: ISNX Large-Bore Hydraulic Assist Spherical Roller Bearings Selection Table
Take-Up Frames
ISNX Large-Bore Hydraulic Assist Spherical Roller Bearing Selection
Sleeve Bearings
Plummer Blocks
DIMENSIONS
Plummer Blocks
DIMENSIONS
ISNX HYD
LARGE BORE SN DIMENSION PLUMMER BLOCKS

P
A
A1
30
Sleeve Bearings
S1
S
X
G
HYD PORT
SLEEVOIL
K
HYD PORT
H
D MIN
D MAX
C
Take-Up Frames
Engineering
Housing Designation
3134
3136
3138
3140
Bearing Series
23134K
23136K
23138K
23140K
Shaft Size
150mm
160mm
170mm
180mm
Part Number
072919
072920
072921
072922
Description
Insert Number
072895
072896
072897
072898
3144
23144K
200mm
072923
072899
3148
3152
3156
3160
3164
3168
3172
3176
23148K
23152K
23156K
23160K
23164K
23168K
23172K
23176K
220mm
240mm
260mm
280mm
300mm
320mm
340mm
360mm
072924
072912
072913
072914
072915
072916
072917
072918
072900
072901
072902
072903
072904
072905
072906
072907
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B16-4
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-18
B16-20
DIMENSIONS
PAGE B16-18
Plummer Blocks
DIMENSIONS
Part No.
048925
048925
048926
048927
048927
048928
048929
048930
048930
048930
048931
048931
048932
048932
048933
048934
048934
-----
Kit consists of:

1 Lockplate
2 Socket head capscrews
2 Lockwashers
SLEEVOIL
Size
30
35
40
45
50
55
60
65
70
75
80
85
90
100
110
115
125
135
140
Sleeve Bearings
ISN LOCKPLATE KITS
507
508
509
510
511
512
513
515
516
517
518
519
520
522
524
526
528
530
532
30
35
40
45
50
55
60
65
70
75
80
85
90
100
110
115
125
135
140
FEATURES/BENEFITS
PAGE B16-3
Front Side Closed Cover

Part Number Description
069960
IPEC08
069960
IPEC08
069961
IPEC09
069962
IPEC10
069962
IPEC10
069963
IPEC11
069964
IPEC13
069965
IPEC15
069965
IPEC15
069965
IPEC15
069966
S2IPEC18
069966
S2IPEC18
069967
S2IPEC20
069967
S2IPEC20
069968
S2IPEC22
069969
S2IPEC26
069969
S2IPEC26
069983
IPEC28
069984
IPEC30
Front Side Open Cover

Part Number
Description
070251
IPECO-08-30mm
070252
IPECO-08-35mm
070253
IPECO-09-40mm
070254
IPECO-10-45mm
070255
IPECO-10-50mm
070256
IPECO-11-55mm
070257
IPECO-13-60mm
070258
IPECO-15-65mm
070259
IPECO-15-70mm
070260
IPECO-15-75mm
070261
IPECO-18-80mm
070262
IPECO-18-85mm
070263
IPECO-20-90mm
070264
IPECO-20-100mm
070265
IPECO-22-110mm
070266
IPECO-29-115mm
070267
IPECO-26-125mm
NOMENCLATURE
PAGE B16-6
Back Side Open Cover

Part Number
Description
070620
IPBECO-08-30mm
070621
IPBECO-08-35mm
070622
IPBECO-09-40mm
070623
IPBECO-10-45mm
070624
IPBECO-10-50mm
070625
IPBECO-11-55mm
070626
IPBECO-13-60mm
070627
IPBECO-15-65mm
070628
IPBECO-15-70mm
070629
IPBECO-15-75mm
070630
IPBECO-18-80mm
070631
IPBECO-18-85mm
070632
IPBECO-20-90mm
070633
IPBECO-20-100mm
070634
IPBECO-22-110mm
070635
IPBECO-29-115mm
070636
IPBECO-26-125mm
SELECTION
PAGE B16-8
B16-21
A
Dimensions in mm
DIMENSIONS
PAGE B16-13
49.5
49.5
55.0
58.3
58.3
61.7
66.3
70.0
70.0
70.0
78.3
78.3
91.2
91.2
97.7
111.4
111.4
125.2
143.2
Part Number Index
Bore
Size
Keyword Index
Housing
Series
Engineering
Take-Up Frames
ISN END COVER
Plummer Blocks
DIMENSIONS
IMPERIAL SPANNER
Sleeve Bearings
Dimensions mm/inch
SLEEVOIL
Take-Up Frames
Shaft Size
mm
Inch
30
1-1/8
thru
thru
35
1-1/2
1-5/8
40
thru
1-3/4
45
1-7/8
thru
thru
50
2
55
60
Engineering
60
70
75
80
thru
85
90
thru
100
2-1/8
2-3/16
thru
2-1/4
2-7/16
thru
3
3-3/16
thru
3-1/4
3-7/16
thru
4
110
Part Number Index
115
thru
125
135
140
4-7/16
thru
5
5-7/16
thru
5-1/2
5-15/16
thru
6
Keyword Index
FEATURES/BENEFITS
PAGE B16-3
Housing
Series
507
thru
508
Part No.
066629
10.84
275.3
9.00
228.6
0.88
22.4
1.63
41.4
2.28
57.9
1.14
29.0
0.32
8.1
0.50
12.7
066630
11.04
280.4
9.00
228.6
0.88
22.4
1.88
47.8
2.48
63.0
1.24
31.5
0.32
8.1
0.50
12.7
509
066631
11.20
284.5
9.00
228.6
0.88
22.4
2.13
54.1
2.73
69.2
1.36
34.5
0.32
8.1
0.50
12.7
510
066632
12.38
314.5
10.00
254.0
0.88
22.4
2.38
60.5
2.98
75.7
1.49
37.8
0.44
11.2
0.50
12.7
512
066633
12.63
320.8
10.00
254.0
1.31
33.3
2.63
66.8
3.40
86.4
1.70
43.2
0.44
11.2
0.50
12.7
513
066634
16.90
429.3
14.00
355.6
1.31
33.3
3.13
79.5
3.80
96.5
1.90
48.3
044
11.2
0.50
12.7
066635
17.39
441.7
14.00
355.6
1.31
33.3
3.63
92.2
4.36
110.7
2.18
55.4
0.44
11.2
0.50
12.7
066636
17.75
450.9
14.00
355.6
1.75
44.5
4.13
104.9
4.91
124.7
2.46
62.5
0.44
11.2
0.50
12.7
066637
20.36
517.1
16.00
406.4
1.75
44.5
4.63
117.6
5.68
144.3
2.84
72.1
0.44
11.2
0.50
12.7
524
066638
25.17
639.3
20.00
508.0
2.00
50.8
5.13
130.3
6.88
174.8
3.44
87.4
0.44
11.2
0.50
12.7
526
thru
528
066642
27.82
706.6
22.00
558.8
2.00
50.8
5.63
143.0
8.05
204.5
4.03
102.4
0.69
4.8
0.50
12.7
530
066643
28.75
730.3
22.00
558.8
2.00
50.8
6.13
155.7
9.13
231.9
4.57
116.1
0.75
19.1
0.50
12.7
536
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-7
B16-22
DIMENSIONS
PAGE B16-13
515
516
517
518
thru
519
520
thru
522
Plummer Blocks
FEATURES/BENEFITS
SNX
Sleeve Bearings
HOUSINGS OF CAST IRON GG25
Cast-in dimples
Pry slots: allow easy disassembly
Part Number Index
Two drain holes: Oil lubrication: 1 for draining and 1 for either sight gauge or for grease escape hole in base
Engineering
4 cap bolts for all housing sizes: for extra strength
Take-Up Frames
SLEEVOIL
Two drilled and tapped grease holes: 1 with grease

fitting, 1 plugged
Keyword Index
Stronger feet for extra load capacity
B16-23
Plummer Blocks
SNX
Sleeve Bearings
FEATURES/BENEFITS
Oil equalization passage: allows oil flow from side to side
Extra capacity oil sump: lowers operating temperature
Standard SNX housings are suitable for either oil or grease lubrication
Seal options: Felt, V-Ring, LD, TS and TT Seals in the 200 and
500 Series
SLEEVOIL
Oil sight gauge & breather kit available
Take-Up Frames
Oil return slots: prevent leaking
Offset dowels and match mark: allows matching of cap to

corresponding base
Engineering
DODGE SDX
HOUSINGS OF GREY CAST IRON GG25 (SDX) OR

SPHEROIDAL DUCTILE IRON GGG40 (SDXD)
Part Number Index
SD housing with extra capability

Size Range 3040 to 3068, 3134 to 3164
Available in cast iron (GG) and spheroidal
ductile iron (GGG40) from stock
Accepts 23000K & 23100K spherical bearings
Drilled and tapped grease hole with grease fitting
Keyword Index
TS labyrinth seal standard

TT Triple-Tect seal optional; housing machined to allow direct
greasing of seal and ability to purge seal
Pre-drilled with grease hole & fitting over seal groove
B16-24
Plummer Blocks
FEATURES/BENEFITS
SEALS
ONE HOUSING MANY SEALS
LD
Split two lip radial seal
SNX 209 - SNX 224
SNX 3028 - SNX 3032
Sleeve Bearings
TS - SDX
Labyrinth Seal: Standard
SDX 3040 - SDX 3068
SDX 3134 - SDX 3164
SDXD 3040 - SDXD 3068
SDXD 3134 - SDXD 3164
SK LD
Split two lip radial seal
SNX 509 - SNX 532
SNX 608 - SNX 620
Single-lip Radial Seals

available individually
TT - SDX
Triple-Tect / Taconite Seal
SDX 3040 - SDX 3068
SDX 3134 - SDX 3164
SDXD 3040 - SDXD 3068
SDXD 3134 - SDXD 3164
Seal Operating Limits

FS
LD
VR & TT
TS
DK
4 m/s
8 m/s
4 m/s
brg. RPM limit
Max temperature
80-90C
100-110C
100-110C
100-110C
100-110C
Keyword Index
Max. circumferential speeds
Part Number Index
Engineering
DK
End cover
SNX 209/509 - SNX 232/532
SNX 308/608 - SNX 320/620
SNX 3028 - SNX 3038
TT - SNX
Triple-Tect
SNX 209/509 SNX 232/532
SK VR
Felt strip with V-ring seal
SNX 509 - SNX 532
SNX 308/608 - SNX 320/620
SLEEVOIL
VR
Felt strip with V-ring seal
SNX 209 - SNX 232
SNX 3024 - SNX 3038
TS - SNX
Labyrinth seal
SNX 209/509 SNX 232/532
SK FS
Felt strip
SNX 509 - SNX 532
SNX 308/608 - SNX 320/620
Take-Up Frames
FS
Felt Seal: Standard
SNX 209 - SNX 232
SNX 3028 - SNX 3038
B16-25
Plummer Blocks
DIMENSIONS
SNX 200 - TS/TT
Plummer Blocks for bearings 22200, 23200
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Housing GG*
Description
SNX 209 - TS/TT
SNX 210 - TS/TT
SNX 211 - TS/TT
SNX 212 - TS/TT
SNX 213 - TS/TT
SNX 215 - TS/TT
SNX 216 - TS/TT
SNX 217 - TS/TT
SNX 218 - TS/TT
SNX 219 - TS/TT
SNX 220 - TS/TT
SNX 222 - TS/TT
SNX 224 - TS/TT
SNX 226 - TS/TT
SNX 228 - TS/TT
SNX 230 - TS/TT
SNX 232 - TS/TT
Labyrinth seal
Part No.
747199
747201
747202
747203
747204
747205
747206
747207
747208
747209
747210
747211
747212
747213
747214
747215
747216
Description
TS 209
TS 210
TS 211
TS 212
TS 213
TS 215
TS 216
TS 217
TS 218
TS 219
TS 220
TS 222
TS 224
TS 226
TS 228
TS 230
TS 232
Triple-Tect seal
Part No.
747234
747235
747236
747237
747238
747239
747240
747241
747242
747243
747244
747245
747246
747247
747248
747249
747250
Description
TT 209
TT 210
TT 211
TT 212
TT 213
TT 215
TT 216
TT 217
TT 218
TT 219
TT 220
TT 222
TT 224
TT 226
TT 228
TT 230
TT 232
Part No.
747217
747218
747219
747220
747221
747222
747223
747224
747225
747226
747227
747228
747229
747230
747231
747232
747233
* Housings are for use with TS or TT seals only

Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-26
B16-26
DIMENSIONS
PAGE B16-26
Plummer Blocks
DIMENSIONS
SNX 200 - TS/TT
SLEEVOIL
Sleeve Bearings
Dimensions in mm
59
64
68
75
79
88
93
97
102
113
113
131
131
140
160
400
400
All other dimensions on page B7- 15

Housings are for use with TS or TT seals only
FEATURES/BENEFITS
PAGE B16-23
Take-Up Frames
4,3
5,1
7,1
9,5
9,7
11,3
12,7
15,7
16,7
27,0
27,8
35,8
41,1
55,2
69,0
77,3
99,9
L-1
TT
91
95
100
112
110
117
123
125
144
150
160
168
185
191
203
220
235
Engineering
TS
91
95
100
112
110
117
123
125
144
150
160
168
185
191
203
220
235
Part Number Index
SNX 209 TS/TT

SNX 210 TS/TT
SNX 211 TS/TT
SNX 212 TS/TT
SNX 213 TS/TT
SNX 215 TS/TT
SNX 216 TS/TT
SNX 217 TS/TT
SNX 218 TS/TT
SNX 219 TS/TT
SNX 220 TS/TT
SNX 222 TS/TT
SNX 224 TS/TT
SNX 226 TS/TT
SNX 228 TS/TT
SNX 230 TS/TT
SNX 232 TS/TT
A
(WITH SEALS)*
kg
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-26
B16-27
DIMENSIONS
PAGE B16-26
Keyword Index
Description
Plummer Blocks
DIMENSIONS
SNX 200 - LD/FS/DK
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-26
B16-28
DIMENSIONS
PAGE B16-26
Plummer Blocks
DIMENSIONS
kg
4,3
5,1
7,1
9,5
9,7
11,3
12,7
15,7
16,7
27,0
27,8
35,8
41,1
55,2
69,0
77,3
99,9
S-1
55
60
65
70
75
85
90
95
100
110
115
125
135
145
155
165
175
S-2
45
50
55
60
65
75
80
85
90
95
100
110
120
130
140
150
160
A1
94
99
104
116
113
121
127
132
151
156
164
174
191
197
210
226
241
B
210
210
244
270
279
283
320
320
346
360
390
419
419
445
500
530
550
C
60
60
70
70
80
80
90
90
98
98
110
121
120
130
150
160
160
Min
159
165
187
197
206
219
245
251
260
276
295
324
337
374
400
443
457
Max
178
178
210
230
241
245
279
279
299
314
333
364
368
387
420
457
483
F
Bolt
Dia
Bolzen
M12
M12
M16
M16
M16
M16
M20
M20
M20
M20
M24
M24
M24
M24
M30
M30
M30
H
25
23
26
29
30
29
33
32
35
35
40
45
45
50
50
60
60
J
112
113
133
139
155
161
178
187
195
214
220
239
267
290
298
317
338
K
45
48
50
56
55
59
62
63
72
75
80
84
93
95
102
110
118
M
60
60
70
70
80
80
95
95
100
112
112
125
140
150
150
160
170
P
124
130
147
156
165
179
202
208
220
229
248
269
286
315
337
364
379
Q
11.5
11.5
12.5
14.0
15.5
15.5
16.5
18.0
20.0
21.5
23.0
26.5
29.0
32.0
34.0
36.5
40.0
W
Static
Oil
Level
X
24,0
29
29,0
31
28,5
33
32,0
38
27,0
41
38,0
44
34,5
49
35,5
53
47,0
57
39,5
60
45,0
67
53,5
73
57,0
81
49,0
84
51,5
92
53,0
91
53.2 102
Y
20
17
22
20
25
21
31
28
28
35
30
34
42
39
35
34
34
LD
91
95
100
112
110
117
123
125
144
150
160
168
185
191
203
220
235
Felt
FS
91
95
100
112
110
117
123
125
144
150
160
168
185
191
203
220
235
A
(With Seals)
End Cover
DK
91
95
100
112
110
117
123
125
144
150
160
168
185
191
203
220
235
TS
99
103
108
119
121
126
134
137
155
161
169
175
195
200
211
230
243
VR
100
105
110
125
123
128
136
139
157
165
174
180
199
204
218
237
250
L-1
59
64
68
75
79
88
93
97
102
113
113
131
131
140
160
400
400
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-26
B16-29
DIMENSIONS
PAGE B16-26
Keyword Index
Part Number Index
Description
SNX 209
SNX 210
SNX 211
SNX 212
SNX 213
SNX 215
SNX 216
SNX 217
SNX 218
SNX 219
SNX 220
SNX 222
SNX 224
SNX 226
SNX 228
SNX 230
SNX 232
Engineering
Dimensions in mm
Shaft
Size
Take-Up Frames
SLEEVOIL
Sleeve Bearings
SNX 200 - LD/FS/DK
Plummer Blocks
SELECTION
SNX 200 - LD/FS/DK
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Description
SNX 209
SNX 210
SNX 211
SNX 212
SNX 213
SNX 215
SNX 216
SNX 217
SNX 218
SNX 219
SNX 220
SNX 222
SNX 224
SNX 226
SNX 228
SNX 230
SNX 232
Housing GG
Description
SNX 209/509
SNX 210/510/308/608
SNX 211/511/309/609
SNX 212/512/310/610
SNX 213/513/311/611
SNX 215/515/312/612
SNX 216/516/313/613
SNX 217/517/314
SNX 218/518/315/615
SNX 219/519/316/616
SNX 220/520/317/617
SNX 222/522/319/619
SNX 224/524/320/620
SNX 226/526
SNX 228/528
SNX 230/530
SNX 232/532
Part No.
747025
747026
747027
747028
747029
747030
747031
747032
747033
747034
747035
747036
747037
747038
747039
747040
747041
LD Seal
Description
Part No.
LD 55
725357
LD 60
725358
LD 65
725359
LD 70
725360
LD 75
725361
LD 85
725363
LD 90
725364
LD 95
725366
LD 100
725341
LD 110
725342
LD 115
725343
LD 125
725344
LD 135
725345
FS Seal
Description
Part No.
6.5X8X200
713600
6.5X8X230
713616
6.5X8X230
713616
7.5X9X260
713633
7.5X9X260
713633
7.5X9X155
713571
8.5X10X165
713579
8.5X10X175
713586
10X12X185
713588
10X12X200
713596
10X12X210
713603
10X12X230
713613
10X12X245
713622
10X12X265
713634
10X12X280
713641
10X12X300
713647
10X12X300
713647
VR Seal
Description
Part No.
VS0055
738145
VS0060
738146
VS0065
738147
VS0070
738148
VS0075
738149
VS0085
738151
VS0090
738152
VS0095
738154
VS0100
738155
VS0110
738157
VS0115
738158
VS0125
738161
VS0135
738162
VS0145
738164
VS0155
738166
VS0165
738168
VS0175
738170
DK End Cover
Description
Part No.
DK 55
709137
DK 60
709140
DK 65
709143
DK 70
709146
DK 75
709152
DK 85
709162
DK 90
709166
DK 90
709166
DK 100
708959
DK 110
708966
DK 115
708970
DK 125
708976
DK 135
708983
DK 145
740381
DK 155
740382
DK 165
740383
DK 175
740384
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-26
B16-30
DIMENSIONS
PAGE B16-26
Description
Fixing Rings
Qty
Part No.
SR 160x6.25
747189
SR 180x4.85
SR 200x5.1
SR 215x5
SR 230x5
SR 250x5
SR 270x5
SR 290x5
2
2
2
2
2
2
2
747190
747191
712225
747192
747193
747194
747195
FEATURES/BENEFITS
PAGE B16-23
Locknut
Description
Part No
KM 9
046285
KM 10
046286
KM 11
046287
KM 12
046487
KM 13
046288
KM 15
046289
KM 16
046290
KM 17
046291
KM 18
046292
KM 19
046488
KM 20
046293
KM 22
046294
KM 24
046295
KM 26
046296
KM 28
046297
KM 30
046298
KM 32
046299
NOMENCLATURE
PAGE B16-6
Lockwasher
Description
Part No
MB 9
046304
MB 10
046305
MB 11
046306
MB 12
046489
MB 13
046307
MB 15
046308
MB 16
046309
MB 17
046310
MB 18
046311
MB 19
046490
MB 20
046312
MB 22
046313
MB 24
046314
MB 26
046315
MB 28
046316
MB 30
046317
MB 32
046318
SELECTION
PAGE B16-26
B16-31
Spherical Roller Bearing

Description
Part No
23218E1.C3
421396
23220E.C3
23222.C3
23224.C3
23226.C3
23228.C3
23230.C3
23232.C3
703943
740623
703967
703976
741031
703990
741550
Sight Glasses
Description
Part No.
SG 209
740452
SG 210
740452
SG 211
740452
SG 212
740452
SG 213
740452
SG 215
740452
SG 216
740452
SG 217
740453
SG 218
740453
SG 219
740453
SG 220
740453
SG 222
740453
SG 224
740453
SG 226
740453
SG 228
740453
SG 230
740453
SG 232
740453
DIMENSIONS
PAGE B16-26
Plummer Blocks
Part No.
747105
747108
747111
747115
747118
747121
747123
747125
747128
747130
747132
747137
747141
747143
747146
747149
747152
Sleeve Bearings
Fixing Rings
Qty
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
SLEEVOIL
Description
SR 85x3.5
SR 90x9
SR 100x9.5
SR 110x10
SR 120x10
SR 130x12.5
SR 140x12.5
SR 150x12.5
SR 160x12.5
SR 170x12.5
SR 180x12
SR 200x13.5
SR 215x14
SR 230x13
SR 250x15
SR 270x16.5
SR 290x17
Take-Up Frames
Housing GG
Description
SNX 209
SNX 210
SNX 211
SNX 212
SNX 213
SNX 215
SNX 216
SNX 217
SNX 218
SNX 219
SNX 220
SNX 222
SNX 224
SNX 226
SNX 228
SNX 230
SNX 232

Description
Part No.
22209E1.C3
421260
22210E1.C3
421261
22211E1.C3
421262
22212E1.C3
421263
22213E1.C3
421264
22215E1.C3
421265
22216E1.C3
421266
22217E1.C3
421267
22218E1.C3
421268
22219E1.C3
422996
22220E1.C3
421269
22222E1.C3
421270
22224E1.C3
421271
22226E1.C3
421272
22228E1.C3
421273
22230E1.C3
421274
22232E1.C3
421275
Engineering
Housing GG
Description
SNX 209
SNX 210
SNX 211
SNX 212
SNX 213
SNX 215
SNX 216
SNX 217
SNX 218
SNX 219
SNX 220
SNX 222
SNX 224
SNX 226
SNX 228
SNX 230
SNX 232
Part Number Index
SNX 200 - LD/FS/DK
Keyword Index
DIMENSIONS
Plummer Blocks
DIMENSIONS
SNX 500
Plummer Blocks for bearings 1200K, 2200K, 22200K, 23200K
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-26
B16-32
DIMENSIONS
PAGE B16-26
Description
SNX 509
SNX 510
SNX 511
SNX 512
SNX 513
SNX 515
SNX 516
SNX 517
SNX 518
SNX 519
SNX 520
SNX 522
SNX 524
SNX 526
SNX 528
SNX 530
SNX 532
B
210
210
244
270
279
283
320
320
346
360
390
419
419
445
500
530
550
C
60
60
70
70
80
80
90
90
98
98
110
120
120
130
150
160
160
Min
159
165
187
197
206
219
245
251
260
276
295
324
337
374
400
443
457
Housing GG
Description
SNX 209/509
SNX 210/510/308/608
SNX 211/511/309/609
SNX 212/512/310/610
SNX 213/513/311/611
SNX 215/515/312/612
SNX 216/516/313/613
SNX 217/517/314
SNX 218/518/315/615
SNX 219/519/316/616
SNX 220/520/317/617
SNX 222/522/319/619
SNX 224/524/320/620
SNX 226/526
SNX 228/528
SNX 230/530
SNX 232/532
FEATURES/BENEFITS
PAGE B16-23
Max
178
178
210
230
241
245
279
279
299
314
333
364
368
387
420
457
483
H
25
23
26
29
30
29
33
32
35
35
40
45
45
50
50
60
60
J
112
113
133
139
155
161
178
187
195
214
220
238
267
290
298
317
338
K
45
48
50
56
55
59
62
63
72
75
80
84
93
95
102
110
118
M
60
60
70
70
80
80
95
95
100
112
112
125
140
150
150
160
170
P
124
130
147
156
165
179
202
208
220
229
248
269
286
315
337
364
379
Q
23
24
25
27
30
31
34
36
38
41
43
48
51
55
58
63
68
W
Static
Oil
Level
24,0
29,0
28,5
32,0
27,0
38,0
34,5
35,5
47,0
39,5
45,0
53,5
57,0
49,0
51,5
53,0
53.2
A
(With Seals)
X
29
31
33
38
41
44
49
53
57
60
67
73
81
84
92
91
102
Y
20
17
22
20
25
21
31
28
28
35
30
34
42
39
35
34
34
LD
91
95
100
112
110
117
123
125
144
150
160
168
185
191
203
220
235
FELT
91
95
100
112
110
117
123
125
144
150
160
168
185
191
203
220
235
VR
100
105
110
121
119
124
136
139
157
162
171
177
199
204
215
233
247
TS
99
103
108
119
121
126
134
137
155
161
169
175
195
200
211
230
243
SK LD Seal
Part No.
747025
747026
747027
747028
747029
747030
747031
747032
747033
747034
747035
747036
747037
747038
747039
747040
747041
Description
SK 509 LD 40
SK 510 LD 45
SK 511 LD 50
SK 512 LD 55
SK 513 LD 60
SK 515 LD 65
SK 516 LD 70
SK 517 LD 75
SK 518 LD 80
SK 519 LD 85
SK 520 LD 90
SK 522 LD 100
SK 524 LD 110
SK 526 LD 115
SK 528 LD 125
SK 530 LD 135
SK 532 LD 140
NOMENCLATURE
PAGE B16-6
EC
91
95
100
112
110
117
123
125
144
150
160
168
185
191
203
220
235
L1
VR
50
55
60
65
70
75
82
87
92
97
102
112
124
129
139
149
154
L2
TS
55
63
68
75
81
86
94
100
105
110
127
139
149
158
160
180
188
SK FS Seal
Part No.
496446
496447
496448
496449
496450
496451
496452
496453
496454
496455
496456
496457
496458
496459
496460
496461
496462
SELECTION
PAGE B16-26
B16-33
TT
107
111
116
127
125
130
143
145
163
169
177
183
202
211
222
239
253
Description
SK 509 FS 40
SK 510 FS 45
SK 511 FS 50
SK 512 FS 55
SK 513 FS 60
SK 515 FS 65
SK 516 FS 70
SK 517 FS 75
SK 518 FS 80
SK 519 FS 85
SK 520 FS 90
SK 522 FS 100
SK 524 FS 110
SK 526 FS 115
SK 528 FS 125
SK 530 FS 135
SK 532 FS 140
Part No.
496464
496465
496466
496467
496468
496469
496470
496471
496472
496473
496474
496475
496476
496477
496478
496479
496480
DIMENSIONS
PAGE B16-26
L3
TT
65
70
75
82
92
97
102
107
112
124
124
144
154
154
164
176
186
SLEEVOIL
A1
94
99
104
116
113
121
127
132
151
156
164
174
191
197
210
226
241
F
Bolt
Dia
M12
M12
M16
M16
M16
M16
M20
M20
M20
M20
M24
M24
M24
M24
M30
M30
M30
Take-Up Frames
Wt.
kg
4,3
5,1
7,1
9,5
9,7
11,3
12,7
15,7
16,7
27,0
27,8
35,8
41,1
55,2
69,0
77,3
99,9
Engineering
Description
SNX 509
SNX 510
SNX 511
SNX 512
SNX 513
SNX 515
SNX 516
SNX 517
SNX 518
SNX 519
SNX 520
SNX 522
SNX 524
SNX 526
SNX 528
SNX 530
SNX 532
S-1
Shaft
Size
40
45
50
55
60
65
70
75
80
85
90
100
110
115
125
135
140
Part Number Index
Dimensions in mm
Keyword Index
SNX 500
Sleeve Bearings
Plummer Blocks
DIMENSIONS
Plummer Blocks
DIMENSIONS
SNX 500
Sleeve Bearings
SLEEVOIL
Description
SNX 509
SNX 510
SNX 511
SNX 512
SNX 513
SNX 515
SNX 516
SNX 517
SNX 518
SNX 519
SNX 520
SNX 522
SNX 524
SNX 526
SNX 528
SNX 530
SNX 532
Take-Up Frames
Engineering
Part Number Index
Description
SNX 509
SNX 510
SNX 511
SNX 512
SNX 513
SNX 515
SNX 516
SNX 517
SNX 518
SNX 519
SNX 520
SNX 522
SNX 524
SNX 526
SNX 528
SNX 530
SNX 532
SK VR Seal
Description
Part No.
SK 509 VR 40
496482
SK 510 VR 45
496483
SK 511 VR 50
496484
SK 512 VR 55
496485
SK 513 VR 60
496486
SK 515 VR 65
496487
SK 516 VR 70
496488
SK 517 VR 75
496489
SK 518 VR 80
496490
SK 519 VR 85
496491
SK 520 VR 90
496492
SK 522 VR 100
496493
SK 524 VR 110
496494
SK 526 VR 115
496495
SK 528 VR 125
496496
SK 530 VR 135
496497
SK 532 VR 140
496498

Description
Part No.
22209EK1.C3
422134
22210EK1.C3
422137
22211EK1.C3
422123
22212EK1.C3
422978
22213EK1.C3
422124
22215EK1.C3
422001
22216EK1.C3
422003
22217EK1.C3
422005
22218EK1.C3
422007
22219EK1.C3
422979
22220EK1.C3
422009
22222EK1.C3
422011
22224EK1.C3
422013
22226EK1.C3
422015
22228EK1.C3
422017
22230EK1.C3
422019
22232EK1.C3
422021
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
Labyrinth Seal
Description
Part No.
TS 509
747328
TS 510
747329
TS 511
747330
TS 512
747331
TS 513
747332
TS 515
747333
TS 516
747334
TS 517
747335
TS 518
747336
TS 519
747337
TS 520
747338
TS 522
747339
TS 524
747340
TS 526
747341
TS 528
747342
TS 530
747343
TS 532
747344
Description
SR 85x3.5
SR 90x9
SR 100x9.5
SR 110x10
SR 120x10
SR 130x12.5
SR 140x12.5
SR 150x12.5
SR 160x12.5
SR 170x12.5
SR 180x12
SR 200x13.5
SR 215x14
SR 230x13
SR 250x15
SR 270x16.5
SR 290x17
Fixing Rings
Quantity
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Part No.
747105
747108
747111
747115
747118
747121
747123
747125
747128
747130
747132
747137
747141
747143
747146
747149
747152
NOMENCLATURE
PAGE B16-6
Triple-Tect Seal
Description
Part No.
TT 509
747384
TT 510
747385
TT 511
747386
TT 512
747387
TT 513
747388
TT 515
747389
TT 516
747390
TT 517
747391
TT 518
747392
TT 519
747393
TT 520
747394
TT 522
747395
TT 524
747396
TT 526
747397
TT 528
747398
TT 530
747399
TT 532
747400
Adapters
Description
Part No.
H 309
046331
H 310
046332
H 311
046219
H 312
046333
H 313
046221
H 315
046222
H 316
046223
H 317
046224
H 318
046225
H 319
719499
H 320
046226
H 322
046227
H 3124
046228
H 3126
046229
H 3128
046230
H 3130
046231
H 3132
046232
SELECTION
PAGE B16-26
B16-34
EC End Cover
Description
Part No.
DK 55
709137
DK 60
709140
DK 65
709143
DK 70
709146
DK 75
709152
DK 85
709162
DK 90
709166
DK 90
709166
DK 100
708959
DK 110
708966
DK 115
708970
DK 125
708976
DK 135
708983
DK 145
740381
DK 155
740382
DK 165
740383
DK 175
740384

Description
Part No.
23218K.C3
739329
23220K.C3
23222K.C3
23224EASK.M.C3
23226K.C3
23228K.C3
23230K.C3
23232K.C3
703941
703951
703967
703971
703982
703989
703996
DIMENSIONS
PAGE B16-26
747189
719400
046719
046720
046721
046722
046723
719406
053201
719408
SR 180X4.85
SR 200x5.1
SR 215x5
SR 230x5
SR 250x5
SR 270x5
SR 290x5
2
2
2
2
2
2
2
Description
SNX 509
SNX 510
SNX 511
SNX 512
SNX 513
SNX 515
SNX 516
SNX 517
SNX 518
SNX 519
SNX 520
SNX 522
Self-aligning Ball Bearings

Description
Part No.
1209K.C3
052637
1210K.C3
052638
1211K.C3
052639
1212K.C3
739145
1213K.C3
052640
1215K.C3
052641
1216K.C3
052642
1217K.C3
052643
1218K.C3
052570
1219K.C3
701659
1220K.C3
052644
1222K.C3
051841
Description
SR 85x5.5
SR 90x10.5
SR 100x12
SR 110x13
SR 120x14
SR 130x15.5
SR 140x16
SR 150x16.5
SR 160x17.5
SR 170x18
SR 180x18
SR 200x21
Fixing Rings
Quantity
2
2
2
2
2
2
2
2
2
2
2
2
Part No.
747177
747178
747179
747180
747181
747182
747183
747184
747185
747186
747187
747188
Adapters
Description
H 209
H 210
H 211
H 212
H 213
H 215
H 216
H 217
H 218
H 219
H 220
H 222
Part No.
719372
719373
719374
719375
719376
719378
719379
719380
719381
719382
719383
719385
Description
SNX 509
SNX 510
SNX 511
SNX 512
SNX 513
SNX 515
SNX 516
SNX 517
SNX 518
SNX 519
SNX 520
SNX 522
Self-aligning Ball Bearings

Description
Part No.
2209K.C3
739150
2210K.C3
702830
2211K.C3
702844
2212K.C3
702857
2213K.C3
702867
2215K.C3
739153
2216K.C3
702883
2217K.C3
702893
2218K.C3
739154
2219K.M.C3
702904
2220K.M.C3
702907
2222K.C3
421399
Description
SR 85x3.5
SR 90x9
SR 100x9.5
SR 110x10
SR 120x10
SR 130x12.5
SR 140x12.5
SR 150x12.5
SR 160x12.5
SR 170x12.5
SR 180x12
SR 200x13.5
Fixing Rings
Quantity
2
2
2
2
2
2
2
2
2
2
2
2
Part No.
747105
747108
747111
747115
747118
747121
747123
747125
747128
747130
747132
747137
Adapters
Description
H 309
H 310
H 311
H 312
H 313
H 315
H 316
H 317
H 318
H 319
H 320
H 322
Part No.
046331
046332
046219
046333
046221
046222
046223
046224
046225
719499
046226
046227
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-26
B16-35
DIMENSIONS
PAGE B16-26
Plummer Blocks
747190
747191
712225
747192
747193
747194
747195
H 2318
H 2319
H 2320
H 2322
H 2324
H 2326
H 2328
H 2330
H 2332
Sight Glasses
Description
Part No.
SG 509
740452
SG 510
740452
SG 511
740452
SG 512
740452
SG 513
740452
SG 515
740452
SG 516
740452
SG 517
740453
SG 518
740453
SG 519
740453
SG 520
740453
SG 522
740453
SG 524
740453
SG 526
740453
SG 528
740453
SG 530
740453
SG 532
740453
Sleeve Bearings
SR 160x6.25
Adapters
Description
Part No.
SLEEVOIL
Part No.
Take-Up Frames
Fixing Rings
Quantity
Description
Engineering
Description
SNX 509
SNX 510
SNX 511
SNX 512
SNX 513
SNX 515
SNX 516
SNX 517
SNX 518
SNX 519
SNX 520
SNX 522
SNX 524
SNX 526
SNX 528
SNX 530
SNX 532
Part Number Index
SNX 500
Keyword Index
DIMENSIONS
Plummer Blocks
DIMENSIONS
SNX 300
Plummer Blocks for bearings 22300
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-26
B16-36
DIMENSIONS
PAGE B16-26
A1
99.1
103.8
115.8
113.3
121.2
126.8
131.6
150.8
156.4
164.1
173.9
191.3
B
210
244.4
269.9
279.4
282.6
319.9
319.7
346.1
360
390
419.1
419.1
Description
SNX 308
SNX 309
SNX 310
SNX 311
SNX 312
SNX 313
SNX 314
SNX 315
SNX 316
SNX 317
SNX 319
SNX 320
Housing GG
Description
SNX 210/510/308/608
SNX 211/511/309/609
SNX 212/512/310/610
SNX 213/513/311/611
SNX 215/515/312/612
SNX 216/516/313/613
SNX 217/517/314
SNX 218/518/315/615
SNX 219/519/316/616
SNX 220/520/317/617
SNX 222/522/319/619
SNX 224/524/320/620
Description
SNX 308
SNX 309
SNX 310
SNX 311
SNX 312
SNX 313
SNX 314
SNX 315
SNX 316
SNX 317
SNX 319
SNX 320

Description
Part No.
22308E1.C3
423124
22309E1.C3
423125
22310E1.C3
423143
22311E1.C3
423126
22312E1.C3
423127
22313E1.C3
423128
22314E1.C3
423129
22315E1.C3
423130
22316E1.C3
423144
22317E1.C3
423131
22319E1.C3
423145
22320E1.C3
423132
FEATURES/BENEFITS
PAGE B16-23
C
59.5
69.9
69.9
80
80
90
90
98.4
98.4
110.3
120.7
119.9
Part No.
747026
747027
747028
747029
747030
747031
747032
747033
747034
747035
747036
747037
Min
165.1
187.3
196.9
206.4
219.1
244.5
250.8
260.4
276.2
295.3
323.9
336.6
Max
177.8
209.6
229.6
241.3
244.5
279.4
279.4
298.5
314.3
333.4
364.3
368.3
F
Bolt
Dia
M12
M16
M16
M16
M16
M20
M20
M20
M20
M24
M24
M24
H
22.6
26.2
29.4
30.2
29.4
32.9
31.8
34.9
35
39.7
44.9
45
J
113
133.4
138.9
154.8
161.1
177.6
187.4
195.3
213.6
219.9
238.5
267
K
47.6
50
56
54.8
58.7
61.5
62.7
72.2
75
80.2
83.7
92.5
SK FS Seal
Description
Part No.
SK 308 FS 50
496400
SK 309 FS 55
496401
SK 310 FS 60
496402
SK 311 FS 65
496403
SK 312 FS 70
496404
SK 313 FS 75
496405
SK 314 FS 80
496406
SK 315 FS 85
496407
SK 316 FS 90
496408
SK 317 FS 95
496409
SK 319 FS 110
496410
SK 320 FS 115
496411
Description
SR 90X4
SR 100X4
SR 110X4
SR 120X4
SR 130X4
SR 140X5
SR 150X5
SR 160X5
SR 170X5
SR 180X5
SR 200X6.5
SR 215X6.5
Fixing Rings
Quantity
2
2
2
2
2
2
2
2
2
2
2
2
NOMENCLATURE
PAGE B16-6
Part No.
747107
747110
747114
747117
747120
747122
747124
747126
747129
747131
747135
747139
M
59.9
69.9
69.9
79.9
79.9
94.9
94.9
99.9
111.9
111.9
124.9
139.9
P
130.2
146.8
155.6
165.1
179.4
201.6
208
219.9
229.4
248.4
269.1
285.8
End Cover
Description
Part No.
DK 60
709140
DK 65
709143
DK 70
709146
DK 75
709152
DK 85
709162
DK 90
709166
DK 90
709166
DK 100
708959
DK 110
708966
DK 115
708970
DK 125
708976
DK 135
708983
Locknut
Description
Part No.
KM 8
046492
KM 9
046285
KM 10
046286
KM11
046287
KM 12
046487
KM13
046288
KM 14
046238
KM 15
046289
KM 16
046290
KM 17
046291
KM 19
046488
KM 20
046293
SELECTION
PAGE B16-26
B16-37
18
18
20
21.5
23
24
25.5
27.5
29
30
33.5
36.5
W
Static
Oil
Level
26.5
32.5
28.6
33.9
30.7
41.7
37.3
38.8
46.9
42.1
50.1
58.1
X
30.5
33
38
41.1
44
49
52.6
56.8
60
66.6
73
81
Y
17
22.1
19.5
25
20.5
30.5
28
27.5
35
30
33.8
42.1
A
(With Seals)
End
Felt Cover
FS
DK
95.3 95.3
100.0 100.0
112.0 112.0
109.5 109.5
117.4 117.4
123.0 123.0
125.2 125.2
144.4 144.4
150.0 150.0
160.3 160.3
167.5 167.5
184.9 184.9
L1
64.3
68.1
75.2
79.2
88.1
93.2
97.3
102.1
113.3
113.3
131.3
131.3
Sight Glasses
Description
Part No.
SG 308
740452
SG 309
740452
SG 310
740452
SG 311
740452
SG 312
740452
SG 313
740452
SG 314
740453
SG 315
740453
SG 316
740453
SG 317
740453
SG 319
740453
SG 320
740453
Lockwasher
Description
Part No.
MB 8
046496
MB 9
046304
MB 10
046305
MB11
046306
MB 12
046489
MB13
046307
MB 14
046239
MB 15
046308
MB 16
046309
MB 17
046310
MB 19
049490
MB 20
046312
DIMENSIONS
PAGE B16-26
SLEEVOIL
kg
5.1
7.1
9.5
9.7
11.3
12.7
15.7
16.7
27.0
27.8
35.8
41.1
Shaft
Size
50
40
55
45
60
50
65
55
70
60
75
65
80
70
85
75
90
80
95
85
110
95
115 100
Take-Up Frames
Description
SNX 308
SNX 309
SNX 310
SNX 311
SNX 312
SNX 313
SNX 314
SNX 315
SNX 316
SNX 317
SNX 319
SNX 320
S-2
Engineering
S-1
Part Number Index
Dimensions in mm
Keyword Index
SNX 300
Sleeve Bearings
Plummer Blocks
DIMENSIONS
Plummer Blocks
DIMENSIONS
SNX 600
Plummer Blocks for bearings 22300K
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-26
B16-38
DIMENSIONS
PAGE B16-26
Plummer Blocks
DIMENSIONS
SNX 600
Part No.
747026
747027
747028
747029
747030
747031
747033
747034
747035
747036
747037
Spherical roller bearing

Description
Part No.
22308E1K.C3
423375
22309E1K.C3
423100
22310E1K.C3
423372
22311E1K.C3
423102
22312E1K.C3
423376
22313E1K.C3
423104
22315E1K.C3
423106
22316E1K.C3
423373
22317E1K.C3
423108
22319E1K.C3
423374
22320E1K.C3
423110
FEATURES/BENEFITS
PAGE B16-23
J
113
133
139
155
161
178
195
214
220
238
267
SK LD Seal
Description
Part No.
SK 608 LD 35
496412
SK 609 LD 40
496413
SK 610 LD 45
496414
SK 611 LD 50
496415
SK 612 LD 55
496416
SK 613 LD 60
496417
SK 615 LD 65
496418
SK 616 LD 70
496419
SK 617 LD 75
496420
SK 619 LD 85
496421
SK 620 LD 90
496422
Description
SR 90X4
SR 100X4
SR 110X4
SR 120X4
SR 130X5
SR 140X5
SR 160X5
SR 170X5
SR 180X5
SR 200X6.5
SR 215X6.5
K
48
50
56
55
59
62
72
75
80
84
93
M
60
70
70
80
80
95
100
112
112
125
140
P
130
147
156
165
179
202
220
229
248
269
286
Q
27
29
32
34
36
35
43
46
48
53
57
SK FS Seal
Description
Part No.
SK 608 FS 35
496423
SK 609 FS 40
496424
SK 610 FS 45
496425
SK 611 FS 50
496426
SK 612 FS 55
496427
SK 613 FS 60
496428
SK 615 FS 65
496429
SK 616 FS 70
496430
SK 617 FS 75
496431
SK 619 FS 85
496432
SK 620 FS 90
496433
Fixing rings
Quantity
2
2
2
2
2
2
2
2
2
2
2
NOMENCLATURE
PAGE B16-6
Part No.
747107
747110
747114
747117
747120
747122
747126
747129
747131
747135
747139
Y
17
22
20
25
21
31
28
35
30
34
42
LD
95
100
112
110
117
123
144
150
160
168
185
SK VR Seal
Description
Part No.
SK 608 VR 35
496434
SK 609 VR 40
496435
SK 610 VR 45
496436
SK 611 VR 50
496437
SK 612 VR 55
496438
SK 613 VR 60
496439
SK 615 VR 65
496440
SK 616 VR 70
496421
SK 617 VR 75
496442
SK 619 VR 85
496443
SK 620 VR 90
496444
Adapters
Description
Part No.
H 2308
046710
H 2309
046711
H 2310
046712
H 2311
046713
H 2312
046714
H 2313
046715
H 2315
719397
H 2316
046717
H 2317
046718
H 2319
046719
H 2320
046720
SELECTION
PAGE B16-26
B16-39
X
31
33
38
41
44
49
57
60
67
73
81
L1
VR VR
103 43
110 50
121 55
119 60
124 65
132 70
153 75
162 82
171 87
177 97
196 102
End Cover
Description
Part No.
DK 60
709140
DK 65
709143
DK 70
709146
DK 75
709152
DK 85
709162
DK 90
709166
DK 100
708959
DK 110
708966
DK 115
708970
DK 125
708976
DK 135
708983
Sight Glasses
Description
Part No.
SG 608
740452
SG 609
740452
SG 610
740452
SG 611
740452
SG 612
740452
SG 613
740452
SG 615
740453
SG 616
740453
SG 617
740453
SG 619
740453
SG 620
740453
DIMENSIONS
PAGE B16-26
SLEEVOIL
H
23
26
29
30
29
33
35
35
40
45
45
A
(With Seals)
Felt
FS End Cover
95
95
100
100
112
112
110
110
117
117
123
123
144
144
150
150
160
160
168
168
185
185
Take-Up Frames
Housing GG
Description
SNX 210/510/308/608
SNX 211/511/309/609
SNX 212/512/310/610
SNX 213/513/311/611
SNX 215/515/312/612
SNX 216/516/313/613
SNX 218/518/315/615
SNX 219/519/316/616
SNX 220/520/317/617
SNX 222/522/319/619
SNX 224/524/320/620
B
C Min Max
210 60 165 178
244 70 187 210
270 70 197 230
279 80 206 241
283 80 219 245
320 90 245 279
346 98 260 299
360 98 276 314
390 110 295 333
419 120 324 364
419 120 337 368
W
Static
Oil
Level
26.5
32.5
28.6
33.9
30.7
41.7
38.8
46.9
42.1
50.1
58.1
Engineering
Description
SNX 608
SNX 609
SNX 610
SNX 611
SNX 612
SNX 613
SNX 615
SNX 616
SNX 617
SNX 619
SNX 620
A1
99
104
116
113
121
127
151
156
164
174
191
F
Bolt
Dia
M12
M16
M16
M16
M16
M20
M20
M20
M24
M24
M24
Part Number Index
Description
SNX 608
SNX 609
SNX 610
SNX 611
SNX 612
SNX 613
SNX 615
SNX 616
SNX 617
SNX 619
SNX 620
Kg
5.1
7.1
9.5
9.7
11.3
12.7
16.7
27.0
27.8
35.8
41.1
Keyword Index
Description
SNX 608
SNX 609
SNX 610
SNX 611
SNX 612
SNX 613
SNX 615
SNX 616
SNX 617
SNX 619
SNX 620
S-1
Shaft
Size
35
40
45
50
55
60
65
70
75
85
90
Sleeve Bearings
Dimensions in mm
Plummer Blocks
DIMENSIONS
SNX 30
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-26
B16-40
DIMENSIONS
PAGE B16-26
kg
81,0
105,0
121,0
161,0
161,0
162,0
235,0
235,0
Housing
Description
Part No.
SNX 3024
747042
SNX 3026
747043
SNX 3028
747044
SNX 3030
747045
SNX 3032
747046
SNX 3034
747047
SNX 3036
747048
SNX 3038
747049
A1
167
174
191
197
197
226
241
241
B
390
419
419
445
445
530
550
550
C Min
110 295
121 324
120 337
130 374
130 374
159 426
159 457
159 457
Max
333
364
368
387
387
464
483
483
LD Seal
Description
Part No.
LD 110
725342
LD 115
725343
LD 125
725344
LD 135
725345
LD 140
725346

Description
Part No.
23024EASK.M.C3
703619
23026K.C3
703628
23028EASK.M
703644
23030EASK.M.C3
703656
23032K.C3
703661
23034K.C3
703670
23036K.C3
703679
23038EASK.M.C3
703689
H
40
45
45
50
50
60
60
60
J
K
M
P
220 80 112 248
239 84 125 269
267 93 140 286
290 95 150 315
290 95 150 315
317 110 160 364
338 118 170 379
338 118 170 379
Q
38.0
49.0
50.5
54.0
58.0
62.5
67.0
68.5
FS Seal
Description
Part No.
10X12X200
713596
10X12X210
713603
10X12X230
713613
10X12X245
713622
10X12X265
713634
10X12X280
713641
10X12X300
713647
10X12X300
713647
Description
SR 180X5
SR 200X10
SR 210X10
SR 225X10
SR 240X10
SR 260X10
SR 280X10
SR 290X10
W
Static
Oil
Level
37
42
52
56
54
50
52
48
X
66.5
73.0
81.0
84.1
84.1
91.3
102.4
102.4
Y
30.0
33.8
42.0
39.0
39.0
33.7
34.0
34.0
VR Seal
Description
Part No.
VS0110
738157
VS0115
738158
VS0125
738160
VS0135
738162
VS0140
738163
VS0150
738165
VS0160
738167
VS0170
738169
Fixing rings
Quantity
2
1
1
1
1
1
1
1
Part No.
747131
747136
747138
747142
747145
747148
747150
747151
LD
160
168
185
191
191
220
235
235
A
(With Seals)
End
Felt
Cover
160
160
168
168
185
185
191
191
191
191
220
220
235
235
235
235
VR
175
179
199
204
204
234
252
252
L1
113
118
139
149
154
164
176
186
End Cover
Description
Part No.
DK 110
708966
DK 115
708970
DK 125
708976
DK 135
708983
DK 140
708989
DK 165
740383
DK 175
740384
Adapters
Description
H 3024
H 3026
H 3028
H 3030
H 3032
H 3034
H 3036
H 3038
Part No.
719419
719420
719421
719422
719423
719425
053088
719429
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-26
B16-41
DIMENSIONS
PAGE B16-26
Keyword Index
Part Number Index
Description
SNX 3024
SNX 3026
SNX 3028
SNX 3030
SNX 3032
SNX 3034
SNX 3036
SNX 3038
F
Bolt
Dia
M24
M24
M24
M24
M24
M30
M30
M30
SLEEVOIL
Description
SNX 3024
SNX 3026
SNX 3028
SNX 3030
SNX 3032
SNX 3034
SNX 3036
SNX 3038
S-1
Shaft
Welleno
110
115
125
135
140
150
160
170
Take-Up Frames
Dimensions in mm
Engineering
SNX 30
Sleeve Bearings
Plummer Blocks
DIMENSIONS
Plummer Blocks
DIMENSIONS
SDX 3000
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-42
B16-42
DIMENSIONS
PAGE B16-42
Plummer Blocks
DIMENSIONS
SDX 3000
Dimensions in mm
120
135
180
215
250
300
330
420
180
200
220
240
260
280
300
320
260
280
290
310
320
320
350
370
560
610
640
700
770
790
830
880
210
230
240
260
280
280
310
330
80
85
90
95
100
105
110
115
480
510
540
600
650
670
710
750
120
130
140
150
160
160
190
200
375
410
435
475
515
550
590
630
190
210
220
240
260
280
300
320
130
140
145
155
160
160
175
185
Housing
Description
SDX 3040
SDX 3140/3044
SDX 3048
SDX 3148/3052
SDX 3056
SDX 3156/3060
SDX 3064
SDX 3068
Part No.
747602
747604
747605
747607
747608
747610
747611
747613
Labyrinth Seal
Description
Part No.
TS-23040
747666
TS-23044
747667
TS-23048
747668
TS-23052
747669
TS-23056
747670
TS-23060
747671
TS-23064
747672
TS-23068
747673

Description
Part No.
23040EASK.M.C3
703694
23044K.MB.C3
703711
23048K.MB.C3
422031
23052K.C3
703725
23056K.M.C3
422030
23060K.C3
703738
23064K.C3
703739
23068K.C3
421282
FEATURES/BENEFITS
PAGE B16-23
S
Bolt
Size
24
30
30
30
36
36
36
36
Description
SR 310x20
SR 340x21
SR 360x24
SR 400x22
SR 420x30
SR 460x24
SR 480x30
SR 520x32
NOMENCLATURE
PAGE B16-6
S1
S2
28
35
35
35
42
42
42
42
34
42
42
42
50
50
50
50
73
85
86
97
102
112
116
123.5
10
10
12
12
13
16
22
23
Triple-Tect Seal
Description
Part No.
TT-23040
747706
TT-23044
747707
TT-23048
747708
TT-23052
747709
TT-23056
747710
TT-23060
747711
TT-23064
747712
TT-23068
747713
Fixing rings
Quantity
2
2
2
2
2
2
2
2
SELECTION
PAGE B16-42
B16-43
Part No.
747155
747159
747161
747166
747167
747171
747172
747174
End
Cover
DK
260
280
290
310
320
320
350
370
TS
Seal
TT
284
304
314
334
344
344
374
394
TT
Seal
TT
289
309
319
339
349
349
379
399
End Cover
Description
EC-SDX3040
EC-SDX3140/3144/3044
EC-SDX3048
EC-SDX3148/3152/3052
EC-SDX3056
EC-SDX3156/3160/3060
EC-SDX3064
EC-SDX3068
Adapters
Description
H 3040
H 3044
H 3048
H 3052
H 3056
H 3060
H 3064
H 3068
DIMENSIONS
PAGE B16-42
TS
215
235
255
275
295
315
335
355
TT
216
250
270
290
310
330
350
370
Part No.
747748
747750
747751
747753
747754
747756
747757
747759
Part No.
719432
719434
719437
719441
719443
719445
719446
719448
SLEEVOIL
Take-Up Frames
Engineering
Description
SDX 3040
SDX 3044
SDX 3048
SDX 3052
SDX 3056
SDX 3060
SDX 3064
SDX 3068
Part Number Index
Description
SDX 3040
SDX 3044
SDX 3048
SDX 3052
SDX 3056
SDX 3060
SDX 3064
SDX 3068
L2
Keyword Index
Description
SDX 3040
SDX 3044
SDX 3048
SDX 3052
SDX 3056
SDX 3060
SDX 3064
SDX 3068
kg
L1
Sleeve Bearings
A
(With Seals)
Plummer Blocks
DIMENSIONS
SDX 3100
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-42
B16-44
DIMENSIONS
PAGE B16-42
A
230
240
260
280
290
310
320
320
350
370
B
510
530
560
610
640
700
770
790
830
880
C
180
190
210
230
240
260
280
280
310
330
H
70
75
80
85
90
95
100
105
110
115
D
430
450
480
510
540
600
650
670
710
750
Housing
Description
Part No.
SDX 3134
747600
E
100
110
120
130
140
150
160
160
190
200
J
335
355
375
410
435
475
515
550
590
630
M
170
180
190
210
220
240
260
280
300
320
K
115
120
130
140
145
155
160
160
175
185
Labyrinth Seal
Description
Part No.
TS-23134
747681
S1
28
28
28
35
35
35
42
42
42
42
S2
34
34
34
42
42
42
50
50
50
50
T
14
15
10
10
12
12
13
16
22
23
Triple-Tect Seal
Description
Part No.
TT-23134
747721
TS
185
195
205
235
235
275
275
315
315
375
TT
186
196
206
250
250
290
290
330
330
390
End Cover
Description
EC-SDX3134
Part No.
747746
SDX 3136
SDX 3136
747601
TS-23136
747682
TT-23136
747722
EC-SDX3136
747747
SDX 3138
SDX 3140
SDX 3144
SDX 3148
SDX 3152
SDX 3138
SDX 3140 / 3044
SDX 3144
SDX 3148
SDX 3152
747603
747604
747606
747607
747609
TS-23138
TS-23140
TS-23044
TS-23148
TS-23052
747683
747684
747667
747686
747669
TT-23138
TT-23140
TT-23044
TT-23148
TT-23052
747723
747724
747707
747726
747709
EC-SDX3138
EC-SDX3140/3144/3044
EC-SDX3140/3144/3044
EC-SDX3148/3152/3052
EC-SDX3148/3152/3052
747749
747750
747750
747753
747753
SDX 3156
SDX 3156 / 3060
747610
TS-23156
747688
TT-23156
747728
EC-SDX3156/3160/3060
747756
SDX 3160
SDX 3164
SDX 3160
SDX 3164
747612
747614
TS-23060
TS-23164
747671
747690
TT-23060
TT-23164
747711
747730
EC-SDX3156/3160/3060
EC-SDX3164
747756
747760
Description
SDX 3134
SDX 3136
SDX 3138
SDX 3140
SDX 3144
SDX 3148
SDX 3152
SDX 3156
SDX 3160
SDX 3164

Description
Part No.
23134K.M.C3
703831
23136ESKTVPB.C3
703840
23138K.C3
703850
23140BK.MB.C3
421403
23144BK.MB.C3
703866
23148BK.MB.C3
703873
23152K.MB.C3
703890
23156BK.MB.C3
703892
23160K.C3
703903
23164K.MB.C3
421287
FEATURES/BENEFITS
PAGE B16-23
Fixing rings
Quantity
2
2
2
2
2
2
2
2
2
2
Description
SR 280x10
SR 300x10
SR 320x10
SR 340x10
SR 370x10
SR 400x10
SR 440x10
SR 460x10
SR 500x10
SR 540x10
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-42
B16-45
Part No.
747150
747154
747156
747157
747162
747164
747168
747170
747173
747175
Adapters
Description
H 3134
H 3136
H 3138
H 3140
H 3144
H 3148
H 3152
H 3156
H 3160
H 3164
DIMENSIONS
PAGE B16-42
Part No.
046233
046234
046235
046236
046237
719480
719485
719489
719491
719492
SLEEVOIL
d
150
160
170
180
200
220
240
260
280
300
TT
Seal
TT
259
269
289
309
319
339
349
349
379
399
L2
Take-Up Frames
Description
SDX 3134
kg
65
75
95
120
135
180
215
250
300
330
73
78
83
88
95
101
111
114
120
130
L1
Engineering
Description
SDX 3134
SDX 3136
SDX 3138
SDX 3140
SDX 3144
SDX 3148
SDX 3152
SDX 3156
SDX 3160
SDX 3164
S
Bolt
Size
24
24
24
30
30
30
36
36
36
36
A
(With Seals)
End
TS
Cover
Seal
DK
TS
230
254
240
264
260
284
280
304
290
314
310
334
320
344
320
344
350
374
370
394
Part Number Index
Dimensions in mm
Keyword Index
SDX 3100
Sleeve Bearings
Plummer Blocks
DIMENSIONS
Plummer Blocks
DIMENSIONS
SDXD 3000
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-46
B16-46
DIMENSIONS
PAGE B16-46
Plummer Blocks
DIMENSIONS
SDXD 3000
B
560
610
640
700
770
790
830
880
C
210
230
240
260
280
280
310
330
Housing
Description
SDXD 3040 / 3138
SDXD 3044 / 3140
SDXD 3048 / 3144
SDXD 3052 / 3148
SDXD 3056 / 3152
SDXD 3060 / 3156
SDXD 3064 / 3160
SDXD 3068 / 3164
H
80
85
90
95
100
105
110
115
D
480
510
540
600
650
670
710
750
E
120
130
140
150
160
160
190
200
J
375
410
435
475
515
550
590
630
M
190
210
220
240
260
280
300
320
K
130
140
145
155
160
160
175
185
Labyrinth Seal
Description
Part No.
TS-23040
747666
TS-23044
747667
TS-23048
747668
TS-23052
747669
TS-23056
747670
TS-23060
747671
TS-23064
747672
TS-23068
747673
Part No.
747624
747626
747627
747629
747630
747632
747633
747635

Description
Part No.
23040EASK.M.C3
703694
23044K.MB.C3
703711
23048K.MB.C3
422031
23052K.C3
703725
23056K.M.C3
420030
23060K.C3
703738
23064K.C3
703739
Description
SR 310x20
SR 340x21
SR 360x24
SR 400x22
SR 420x30
SR 460x24
SR 480x30
SR 520x32
S1
28
35
35
35
42
42
42
42
S2
34
42
42
42
50
50
50
50
T
10
10
12
12
13
16
22
23
Triple-Tect Seal
Description
Part No.
TT-23040
747706
TT-23044
747707
TT-23048
747708
TT-23052
747709
TT-23056
747710
TT-23060
747711
TT-23064
747712
TT-23068
747713
Fixing rings
Quantity
2
2
2
2
2
2
2
2
Part No.
747155
747159
747161
747166
747167
747171
747172
747174
End Cover
Description
EC-SDX3040
EC-SDX3140/3144/3044
EC-SDX3048
EC-SDX3148/3152/3052
EC-SDX3056
EC-SDX3156/3160/3060
EC-SDX3064
EC-SDX3068
Adapters
Description
H 3040
H 3044
H 3048
H 3052
H 3056
H 3060
H 3064
H 3068
L1
TS
205
235
255
275
295
315
335
355
L2
TT
206
250
270
290
310
330
350
370
Part No.
747748
747750
747751
747753
747754
747756
747757
747759
Part No.
719432
719434
719437
719441
719443
719445
719446
719448
SLEEVOIL
A
260
280
290
310
320
320
350
370
TT
Seal
TS-TT
268
299
303
323
333
333
363
383
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-46
B16-47
DIMENSIONS
PAGE B16-46
Keyword Index
Part Number Index
Description
SDXD 3040
SDXD 3044
SDXD 3048
SDXD 3052
SDXD 3056
SDXD 3060
SDXD 3064
SDXD 3068
d
180
200
220
240
260
280
300
320
A
TS
Seal
TS
284
294
298
318
328
328
358
378
Take-Up Frames
Description
SDXD 3040
SDXD 3044
SDXD 3048
SDXD 3052
SDXD 3056
SDXD 3060
SDXD 3064
SDXD 3068
kg
95
135
180
215
250
300
330
420
83
85
86
97
102
112
116
123.5
End
Cover
DK
260
280
290
310
320
320
350
370
Engineering
Description
SDXD 3040
SDXD 3044
SDXD 3048
SDXD 3052
SDXD 3056
SDXD 3060
SDXD 3064
SDXD 3068
S
Bolt
Size
24
30
30
30
36
36
36
36
Sleeve Bearings
Dimensions in mm
Plummer Blocks
DIMENSIONS
SDXD 3100
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B16-23
NOMENCLATURE
PAGE B16-6
SELECTION
PAGE B16-46
B16-48
DIMENSIONS
PAGE B16-46
Description
SDXD 3134
SDXD 3136
SDXD 3138
SDXD 3140
SDXD 3144
SDXD 3148
SDXD 3152
SDXD 3156
SDXD 3160
SDXD 3164
A
230
240
260
280
290
310
320
320
350
370
B
510
530
560
610
640
700
770
790
830
880
C
180
190
210
230
240
260
280
280
310
330
H
70
75
80
85
90
95
100
105
110
115
D
430
450
480
510
540
600
650
670
710
750
Housing
Description
Part No.
SDXD 3134
747622
SDXD 3136
747623
SDXD 3138 / 3040
747625
SDXD 3140 / 3044
747626
SDXD 3144 / 3048
747628
SDXD 3148 / 3052
747629
SDXD 3152 / 3056
747631
SDXD 3156 / 3060
747632
SDXD 3160 / 3064
747634
SDXD 3164 / 3068
747636
E
100
110
120
130
140
150
160
160
190
200
M
170
180
190
210
220
240
260
280
300
320
K
115
120
130
140
145
155
160
160
175
185
Labyrinth Seal
Description
Part No.
TS-23134
747681
TS-23136
747682
TS-23138
747683
TS-23140
747684
TS-23044
747667
TS-23148
747686
TS-23052
747669
TS-23156
747688
TS-23060
747671
TS-23164
747690

Description
Part No.
23134K.M.C3
703831
23136ESKTVPB.C3
703840
23138K.C3
703850
23140BK.MB.C3
421403
23144BK.MB.C3
703866
23148BK.MB.C3
703873
23152K.MB.C3
703890
23156BK.MB.C3
703892
23160K.C3
703903
23164K.MB.C3
421287
FEATURES/BENEFITS
PAGE B16-23
J
335
355
375
410
435
475
515
550
590
630
Description
SR 280x10
SR 300x10
SR 320x10
SR 340x10
SR 370x10
SR 400x10
SR 440x10
SR 460x10
SR 500x10
SR 540x10
NOMENCLATURE
PAGE B16-6
S1
28
28
28
35
35
35
42
42
42
42
S2
34
34
34
42
42
42
50
50
50
50
73
78
83
88
95
101
111
114
120
130
End
Cover DK
230
240
260
280
290
310
320
320
350
370
Triple-Tect Seal
Description
Part No.
TT-23134
747721
TT-23136
747722
TT-23138
747723
TT-23140
747724
TT-23044
747707
TT-23148
747726
TT-23052
747709
TT-23156
747728
TT-23060
747711
TT-23164
747730
Fixing rings
Quantity
2
2
2
2
2
2
2
2
2
2
SELECTION
PAGE B16-46
B16-49
T
14
15
10
10
12
12
13
16
22
23
Part No.
747150
747154
747156
747157
747162
747164
747168
747170
747173
747175
TS
Seal TS
238
264
284
304
314
334
344
344
374
394
TT
Seal TT
269
289
309
319
339
349
349
379
399
End Cover
Description
EC-SDX3134
EC-SDX3136
EC-SDX3138
EC-SDX3140/3144/3044
EC-SDX3140/3144/3044
EC-SDX3148/3152/3052
EC-SDX3148/3152/3052
EC-SDX3156/3160/3060
EC-SDX3156/3160/3060
EC-SDX3164
Adapters
Description
H 3134
H 3136
H 3138
H 3140
H 3144
H 3148
H 3152
H 3156
H 3160
H 3164
DIMENSIONS
PAGE B16-46
L2
TS
185
195
205
235
235
275
275
315
315
375
TT
186
196
206
250
250
290
290
330
330
390
Part No.
747746
747747
747749
747750
747750
747753
747753
747756
747756
747760
Part No.
046233
046234
046235
046236
046237
719480
719485
719489
719491
719492
SLEEVOIL
d
150
160
170
180
200
220
240
260
280
300
L1
Take-Up Frames
Description
SDXD 3134
SDXD 3136
SDXD 3138
SDXD 3140
SDXD 3144
SDXD 3148
SDXD 3152
SDXD 3156
SDXD 3160
SDXD 3164
kg
65
75
95
120
135
180
215
250
300
330
Engineering
Description
SDXD 3134
SDXD 3136
SDXD 3138
SDXD 3140
SDXD 3144
SDXD 3148
SDXD 3152
SDXD 3156
SDXD 3160
SDXD 3164
S
Bolt
Size
24
24
24
30
30
30
36
36
36
36
Part Number Index
Dimensions in mm
Keyword Index
SDXD 3100
Sleeve Bearings
Plummer Blocks
DIMENSIONS
Plummer Blocks
NOTES
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
B16-50
Sleeve Bearings
Features / Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-2
Plummer Blocks
CONTENTS
Specification/How To Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-4

Selection
SOLIDLUBE - Inch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-6
SOLIDLUBE - Metric. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-8

Babbitted and Bronze-Bushed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-34
BRONZOIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-54
Sleeve Bearings
Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-5
Dimensions
Babbitted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-38

Bronze - Bushed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-50
BRONZOIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-55

Shaft Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-57
SLEEVOIL
SOLIDLUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17-10
Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1
Keyword Index
Part Number Index
Engineering
Take-Up Frames
Key Word Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEYWORD-1
B17-1
Plummer Blocks
FEATURES/BENEFITS
Sleeve Bearings
SOLIDLUBE . . . . . . . . . . . . . . . .
Self-Lubricating, Statically Self-Aligning Bearings for

Extreme Industrial Applications
Sleeve Bearings
Good in temperature extremes and inaccessible

locations.
Will function effectively in a vacuum.
Ideal where bearings are subject to dry cycles or where
lube systems would be too costly.
Usable in many corrosive (chemical) medias.
Will operate in submersible applications of some low
viscosity liquids.
SLEEVOIL
Recommended for slow speeds and limited shaft

movement applications.
Take-Up Frames
BRONZOIL . . . . . . . . . . . . . . . . .
Self Oiling Bushing Feeds Oil to Shaft
Split Pressed Steel Housing
Engineering
Statically Self-Aligning
Bushing Shoulder Provides Self-Lubricating Bearing
Thrust Surface
Slotted Bolt Holes
Oil Resistant Rubber Grommets Available for Sound
Isolation and Static Electricity Protection
Part Number Index

Keyword Index
B17-2
Sleeve Bearings
BABBITTED AND
BRONZE-BUSHED
BEARINGS . . . . . . . . . . . . . . . . .
GOOD FOR SLOW SPEEDS AND SHOCK
LOADS
MPTA LOAD RATINGS
Cast Iron Housings
Sleeve Bearings
Plummer Blocks
FEATURES/BENEFITS
Babbitted
SLEEVOIL
2 and 4 Bolt Housings
Solid or Fully Split Housing
Bronzed-Bushed
Fully Split Housing
Take-Up Frames
Babbitted Bearing Surface
Replaceable Split Bronze Bushings
Keyword Index
Part Number Index
Engineering
Brass Locking Spool for Easy Bushing Replacement
B17-3
Plummer Blocks
SPECIFICATION/
HOW TO ORDER
Sleeve Bearings
Sleeve Bearings
HOW TO ORDER SLEEVE BEARINGS
Bronze-Bushed
There are two ways to specify DODGE Sleeve Bearings. Most

of the product offering have part numbers with listings shown
order processing.
Grease lubricated for moderate speeds, ambient temperature to 300F

and heavy loads or shock loads make the advantage of a precision
replaceable bronze bushing desirable. Other bushing material is
available on a special order basis, such as bronze with graphite plugs, or
phenolic resin on nylon.

when ordering units that include modifications or options.
To order by description, use the nomenclature key shown on
page B17-5 and add any special instructions to the end of the
BRONZOIL
Economical, statically self-aligning, and self-lubricating pillow blocks
and four-bolt flange units for fans, light machinery, and other general
use; ambient temperature to 180F.
SOLIDLUBE
SLEEVOIL
Statically self-aligning, non-galling, solid-film lubricating for temperature

extremes.
700 Series:
-40 to 700F
1000 Series: -200 to -40F; 250F to 1,000F

800 Series:
-40 to 800F
Also suitable for submerged and limited movement applications.

Take-Up Frames
Babbitted
Grease lubricated for moderate speeds and loads, ambient temperature
to 130F, babbitt accurately bored to insure even load distribution for
conveyor shafts, heavy gear, and chain drives use.
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
NOMENCLATURE
PAGE B17-5
SELECTION
PAGE B17-6
B17-4
PAGE B17-10
Sleeve Bearings
SLEEVE BEARING NOMENCLATURE
P2B - LT7 - 108 - SH

MODIFICATIONS/FEATURES:
SH Stainless Steel Housing
(Available with SOLIDLUBE LT
Series Only)
BO
BASO
BASP
BAR
BAA
BAP
BZSP
BZR
LT7
TB
FB
LTB7
Tapped Base
Flanged Bracket
LT10
LTB10
LM8
MM7
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
SELECTION
PAGE B17-6
B17-5
PAGE B17-10
Keyword Index
Part Number Index
MM10
SHAFT SIZE:
BRONZOIL
115 First Digit: Number Of Inches
Babbitted Solid
Second And Third Digit: Sixteenths Of An Inch
Babbitted Split
115 Indicates 1-15/16
Babbitted Rigid 50M FIRST TWO DIGITS: Bore In Millimeters;
Babbitted Angle
M : Indicates Metric Dimension
Babbitted Plate
Bronze Bushed Split
Bronze Bushed Rigid
SOLIDLUBE LT700
Series
SOLIDLUBE LT 1000
Series
SOLIDLUBE Lower
Backing Height
On Pillow Blocks For LT700 Series
SOLIDLUBE Lower Backing Height
On Pillow Blocks For LT1000 Series
SOLIDLUBE
LM800 Series
SOLIDLUBE
MM700 Series
SOLIDLUBE
MM1000 Series
SLEEVOIL
Pillow Block, 2 Bolt

Base
P4B
Pillow Block, 4 Bolt
Base
F2B
Flange, 2 Bolt
F4B
Flange, 4 Bolt
HNG
Hanger Bearing
NSTU Narrow Slot Take-Up
SCHB Screw Conveyor
Hanger Bearing
WSTU Wide Slot Take-Up
Take-Up Frames
STYLE:
P2B
Engineering
HOUSINGS:
Sleeve Bearings
Plummer Blocks
NOMENCLATURE
Plummer Blocks
SELECTION
Sleeve Bearings - SOLIDLUBE - Inch
Bearing Size
Sleeve Bearings
Select a bearing from tables for normal loads or loads in limited shaft movement applications
having a radial load equal to or greater than the actual load. This simple method is all that
is required for the majority of general machine applications using commercial steel shafting
and operating in a dry atmosphere. (For more favorable conditions, ratings may be increased
+1000-F somewhat; consult factory). Shaft collars may be used for slight amounts of thrust. Generally the
rule of 10% of the radial load applies. Dirty environments will reduce bearing life and should be
avoided. Losses due to friction can be as high as 30% depending on speed, lead, temperature
and shaft material.
Too
Hot
+700-F
Shafting
Commercial steel shafting is good in applications where temperatures do not exceed 700F.
However, for extended bearing life, at any temperature, the shaft should be hardened to 35
Rockwell C or better. Shaft finish should be 10 to 20 micro-inches. A finish rougher than 20 will
lessen bearing life. A finish smoother than 10 will not allow the optimum lubricant film to develop.
Shaft tolerance should be +.000/-.002 for commercial steel shafting. If using other shaft materials,
consult DODGE for the shaft tolerance and thermal expansion.
SLEEVOIL
+250-F
Take-Up Frames
Not
Applicable
Moisture
Tends to
Gum Up Brg.
When commercial shafting is exposed to a corrosive media, it will oxidize. A rusty shaft will grow
in the bearing, thus eliminating clearances. In this case stainless steel shafting may be used and/
or provide for regularly scheduled movement of shaft. In elevated temperatures stainless grades
such as 17-4, 15-5, or 13-8 are hardenable. Shafts can be spray coated with ceramic or hard
chrome. This is good up to about 800F. Check with your supplier, since these coatings can flake
off when the coefficient of thermal expansion of the base material differs greatly from that of the
coating.
High grade specialty shafting may be used in excess of 1000F. It may be less expensive to use
sleeves of this material on more economical shafting.
Noise or High Pitched Squeal
-40-F
-40-F
Too
Cold
-200-F
Carbon-graphite bushings can develop a high frequency vibration in resonance with the operating
system to cause noise. Dampening or change of resonant frequency of the shaft is required to
eliminate noise.
Specials
SOLIDLUBE bearings or bearings made from alternate bushing materials such as polymers,
fibers, bronze, etc. for unusual operating and load conditions are available on a specially
engineered basis by supplying the following:
Shaft size, material and rpm.
Normal load, shock load and frequency.
Engineering
700 Series
1000 Series
Direction of load.
Ambient temperature and atmospheric conditions (water, dirt, corrosive, etc.)
SOLIDLUBE
Bearing
Operating
Temperature
Type of bearing: pillow block, flange bearing, etc.

Housing material desired.
Quantity.
End Closures
Ball Bearing End Closures are available (B4-102).
Part Number Index
Note: SOLIDLUBE bearings are not designed for rotating housing applications
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-6
PAGE B17-10
SOLIDLUBE 700, 1000 and 800 Series
SOLIDLUBE Bearing 700 and 1000 Series Radial Load Ratings in Pounds (Normal Loads)
500
110
120
135
170
180
185
200
235
345
400
550
105
110
125
155
165
170
180
215
315
365
600
96
105
115
145
150
155
165
195
290
700
82
90
97
120
130
135
145
170
800
72
80
85
105
110
115
125
900
64
70
75
95
99
105
1000
57
60
68
86
89
1100
52
54
62
78
81
1300
44
47
42
66
350
165
175
190
245
255
265
285
340
445
570
665
740
815
1600
35
38
42
1900
30
32
400
145
155
170
215
220
235
250
295
390
500
575
645
...
450
125
130
150
190
200
205
225
265
345
445
510
...
...
2200
26
2500
22
Take-Up Frames
Shaft Size
3/4
7/8, 15/16, 1
1-1/8, 1-3/16
1-1/4, 1-3/8, 1-7/16, 1-1/2
1-11/16, 1-3/4
1-15/16, 2
2-3/16
2-7/16, 2-1/2
2-15/16, 3
3-7/16, 3-1/2
Radial Load Ratings in Pounds at various Revolutions per Minute

75
100
150
200
250
300
560
560
380
285
230
190
750
610
405
315
245
205
908
680
450
340
270
225
1140
855
570
430
340
280
1190
895
595
440
390
295
1240
930
620
465
370
310
1340
1000
670
500
400
335
1580
1180
795
590
475
390
2070
1560
1040
780
625
515
2670
2000
1340
1000
800
670
3060
2290
1530
1150
930
765
3440
2580
1720
1290
1030
860
3810
2860
1910
1430
1140
955
50
560
750
1050
1610
1790
1860
2010
2360
3120
4000
4590
5150
5710
NOTE: The above ratings apply to all base loaded pillow blocks, all cylindrical units and flange type bearings (up to 700F). For

flange bearings operating at temperatures above 700F, cap and side loading of pillow blocks consult Application

Engineering. For operations speeds below heave line, use LT1000 and/or hardened shaft.
SOLIDLUBE Bearing Corrosion (Chemical) Resistance

Type of
Chemical
Chemical
Solvents
Salts
Gases
Alkalis (Bases
& Alkaline
Solutions)
Acids and
Acidic
Solutions
Mineral (Non-Oxidizing)
Mineral (Oxidizing)
Inorganic Salts (Acid Forming)
Organic (Strong)
Organic (Weak) pH 3-7
Organic Salts (Acid Forming)
Mineral (Non-Oxidizing)
Mineral (Oxidizing)
Inorganic Salts (Base Forming)
Organic (Strong)
Weak Organic Bases pH 7-11
Acid
Alkaline (base)
Anhydrous (dew Point below -30F)
Cyrogenic (Liquefied)
Inert
Oxidizing
Reducing
Acid Salts
Alkaline Sales
Metals
Neutral Salts
Neutral Salt Solutions
Aliphatic
Aromatic
Chlorinated, Fluorinated
Oxygenated, Sulfides
Good. Not known interaction; compatible
Questionable (depends on conditions)
Not recommended
FEATURES/BENEFITS
PAGE B17-2
Bearing Series
LM800
1000
700
Note: For compatibility or specific chemical, contact Application

Engineering
700 and 1000 Series SOLIDLUBE Bearing

Radial Load Rating in Pounds
(Limited Shaft Movement Applications)
Max. Radial Load

Max.
Base
Cap or Side
Thrust
Loaded
Loading
3/4
1100
775
56
7/8, 15/16, 1
1500
795
75
1-1/8, 1-3/16
2100
820
105
1-1/4, 1-3/8, 1-7/16, 1-1/2
3200
1710
161
1-11/16, 1-3/4
4000
1905
198
1-15/16, 2
4700
1920
236
2-3/16
5700
1900
287
2-7/16, 2-1/2
7500
2360
376
2-15/16, 3
12,000
4151
597
Use only when shaft movement is limited to approx. 90. Movement is infrequent as opposed to continuous
and maximum bearing temperature is 700F.
Shaft Size
LM800
Radial Load Ratings
Bearing
Max. Radial
Max. Radial
Size
Base Load
Cap Load
3/4
560
560
1
750
600
1-1/4
1610
600
1-1/2
1610
600
Note: These load ratings are to be used only when shaft rotation is less than 10 RPM and temperature

does not exceed 800 F. Maximum allowable thrust load is 50 lbs.
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-7
PAGE B17-10
Engineering
3/4
7/8, 15/16, 1
1-1/8, 1-3/16
1-1/4, 1-3/8, 1-7/16, 1-1/2
1-11/16, 1-3/4
1-15/16, 2
2-3/16
2-7/16, 2-1/2
2-15/16, 3
3-7/16, 3-1/2
3-15/16, 4
4-7/16, 4-1/2
4-15/16, 5
25
560
750
1050
1610
1980
2360
2870
3760
5970
8010
9160
10300
11400
Part Number Index
Up to 10
560
750
1050
1610
1980
2360
2870
3760
5970
9100
11800
15200
18400
Keyword Index
Shaft Size
SLEEVOIL
Sleeve Bearings - SOLIDLUBE - Inch
Sleeve Bearings
Plummer Blocks
SELECTION
Plummer Blocks
SELECTION
Sleeve Bearings - SOLIDLUBE - Metric
Bearing Size
Sleeve Bearings
+537C
Too
Hot
Select a bearing from tables for normal loads or loads in limited shaft movement applications
having a radial load equal to or greater than the actual load. This simple method is all that
is required for the majority of general machine applications using commercial steel shafting
and operating in a dry atmosphere. (For more favorable conditions, ratings may be increased
somewhat; consult factory). Shaft collars may be used for slight amounts of thrust. Generally the
rule of 10% of the radial load applies. Dirty environments will reduce bearing life and should be
avoided. Losses due to friction can be as high as 30% depending on speed, load, temperature
and shaft material.
Shafting
Commercial steel shafting is good in applications where temperatures do not exceed 370C.
However, for extended bearing life, at any temperature, the shaft should be hardened to 35
Rockwell C or better. Shaft finish should be .25 to .50 micro-meters. A finish rougher than .50
will lessen bearing life. A finish smoother than Ra. 25 micro-meters will not allow the optimum
lubricant film to develop. Shaft tolerance should be +.000/-.051 millimeters for commercial
steel shafting. If using other shaft materials, consult DODGE for the shaft tolerance and thermal
expansion.
+370C
SLEEVOIL
When commercial shafting is exposed to a corrosive media, it will oxidize. A rusty shaft will grow
in the bearing, thus eliminating clearances. In this case stainless steel shafting may be used and/
or provide for regularly scheduled movement of shaft. In elevated temperatures stainless grades
such as 17-4, 15-5, or 13-8 are hardenable. Shafts can be spray coated with ceramic or hard
chrome. This is good up to about 425C. Check with your supplier, since these coatings can flake
+120C off when the coefficient of thermal expansion of the base material differs greatly from that of the
coating.
Take-Up Frames
Not
Applicable
Moisture
Tends to
Gum Up Brg.
High grade specialty shafting may be used in excess of 537C. It may be less expensive to use
sleeves of this material on more economical shafting.
Noise or High Pitched Squeal
-40C
-40C
Carbon-graphite bushings can develop a high frequency vibration in resonance with the operating
system to cause noise. Dampening or change of resonant frequency of the shaft is required to
eliminate noise.
Specials
-128C
Too
Cold
SOLIDLUBE bearings or bearings made from alternate bushing materials such as polymers,
fibers, bronze, etc. for unusual operating and load conditions are available on a specially
engineered basis by supplying the following:
Shaft size, material and rpm.
Engineering
Normal load, shock load and frequency.

700 Series
1000 Series
Part Number Index
SOLIDLUBE
Bearing
Operating
Temperature
Direction of load.
Ambient temperature and atmospheric conditions (water, dirt, corrosive, etc.)
Type of bearing: pillow block, flange bearing, etc.
Housing material desired.
Quantity.
End Closures
Ball Bearing End Closures are available (Page B4-102).
Note: SOLIDLUBE bearings are not designed for rotating housing applications
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-8
PAGE B17-10
204
205
206
207
209
210
212
215
Series
204
205
206
207
209
210
212
215
Shaft Size
20mm
25mm
30mm
35mm
40mm, 45mm
50mm
60mm
70mm, 75mm
Shaft Size
20mm
25mm
30mm
35mm
40mm, 45mm
50mm
60mm
70mm, 75mm
10
2490
3340
4670
7160
8800
10500
16700
26500
25
2490
3340
4670
7160
8800
10500
16700
26500
500
490
530
600
760
800
820
1040
1530
550
470
490
560
690
730
760
960
1400
50
2490
3340
4670
7160
7960
8270
10500
13900
600
430
470
510
640
670
690
870
1290
Radial Load Ratings in Newtons at Various Revolutions per Minute

75
100
150
200
250
300
2490
2490
1690
1270
1020
840
3340
2710
1800
1400
1090
910
4040
3020
2000
1510
1200
1000
5070
3800
2540
1910
1510
1240
5290
3980
2650
1960
1740
1310
5520
4140
2760
2070
1650
1380
7030
5250
3540
2620
2110
1730
9200
6940
4630
3470
2780
2290
Radial Load Ratings in Newtons at Various Revolutions per Minute

700
800
900
1000
1100
1300
1600
360
320
200
250
230
200
160
400
360
310
270
240
210
170
430
380
330
300
280
190
190
530
470
420
380
350
300
..
580
490
440
400
360
...
..
600
510
470
...
...
...
..
760
...
...
...
...
...
..
...
...
...
...
...
...
..
350
730
780
840
1090
1130
1180
1510
1980
1900
130
140
.
.
.
.
.
400
640
690
760
960
980
1040
1310
1740
2200
120
..
..
..
..
..
..
450
560
580
670
840
890
910
1180
1540
2500
100
. ..
.
.
.
.
.
.
NOTE: The above ratings apply to all base loaded pillow blocks, all cylindrical units an flange type bearings (up to 370C). For

flange bearings operating at temperatures above 370C, cap and side loading of pillow blocks consult Applications

Engineering. For operation speeds below heavy line, use LT1000 and/or hardened shaft.
SOLIDLUBE Bearings
700 Series and 1000 Series
Radial Load Ratings in Newtons (N)
(Limited Shaft Movement Applications)
Max. Radial Load
204
205
206
207
209
210
212
215
Shaft Size
20mm
25mm
30mm
35mm
40mm, 45mm
50mm
60mm
70mm, 75mm
Base
Loaded
Cap or Side
Loading
Max.
Thrust
Load
4890
6670
9340
14200
17800
20900
33400
53400
3450
3540
3650
7600
8470
8540
10500
18500
250
330
470
720
880
1050
1670
2660
Part Number Index
Series
Use only when shaft movement is Limited to approx. 90

Movement is infrequent as opposed to continuous and maximum bearing temperature is 370C.
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-9
PAGE B17-10
Keyword Index
Series
SLEEVOIL
SOLIDLUBE Bearing 700 and 1000 Series Radial Load Ratings in Newtons (N) Normal Loads
Take-Up Frames
SOLIDLUBE BEARING 700 and 1000 SERIES
Engineering
Sleeve Bearings - SOLIDLUBE - Metric
Sleeve Bearings
Plummer Blocks
SELECTION
Plummer Blocks
Sleeve Bearings - SOLIDLUBE
3/4 THRU 3 SOLIDLUBE LT PILLOW BLOCKS
Sleeve Bearings
SLEEVOIL
Series
Take-Up Frames
204
205
206
Engineering
207
209
Part Number Index
210
211
212
215
Shaft
Size
Keyword Index
3/4
20mm
7/8
15/16
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
1-1/2
35mm
1-11/16
1-3/4
40mm
45mm
1-15/16
2
50mm
2-3/16
2-7/16
2-1/2
60mm
2-15/16
3
70mm
75mm
FEATURES/BENEFITS
PAGE B17-2
Part Number
033667
034225
033668
033669
033670
034226
033672
033673
034227
033674
033676
033677
033678
034228
033680
033681
034229
034230
033682
033683
034231
033684
033686
033687
034221
033688
033077
034232
034233
700 SERIES
Description
P2B-LT7-012
P2B-LT7-20M
P2B-LT7-014
P2B-LT7-015
P2B-LT7-100
P2B-LT7-25M
P2B-LT7-102
P2B-LT7-103
P2B-LT7-30M
P2B-LT7-104
P2B-LT7-106
P2B-LT7-107
P2B-LT7-108
P2B-LT7-35M
P2B-LT7-111
P2B-LT7-112
P2B-LT7-40M
P2B-LT7-45M
P2B-LT7-115
P2B-LT7-200
P2B-LT7-50M
P2B-LT7-203
P2B-LT7-207
P2B-LT7-208
P2B-LT7-60M
P2B-LT7-215
P2B-LT7-300
P2B-LT7-70M
P2B-LT7-75M
Wt.
1.70
0.77
1.60
1.50
1.40
0.64
2.80
2.70
1.22
4.20
3.90
3.80
3.70
1.77
6.00
5.80
2.72
2.63
6.80
6.60
3.08
8.00
10.10
9.80
4.58
21.20
20.90
9.98
9.62
PAGE B17-4
Part Number
033977
034234
033978
033979
033980
034235
033982
033983
034236
033984
033986
033987
033988
034237
033990
033991
034238
034239
033992
033993
034240
033994
033996
033997
034241
033998
033974
034242
034243
NOMENCLATURE
PAGE B17-5
B17-10
1000 SERIES
Description
P2B-LT10-012
P2B-LT10-20M
P2B-LT10-014
P2B-LT10-015
P2B-LT10-100
P2B-LT10-25M
P2B-LT10-102
P2B-LT10-103
P2B-LT10-30M
P2B-LT10-104
P2B-LT10-106
P2B-LT10-107
P2B-LT10-108
P2B-LT10-35M
P2B-LT10-111
P2B-LT10-112
P2B-LT10-40M
P2B-LT10-45M
P2B-LT10-115
P2B-LT10-200
P2B-LT10-50M
P2B-LT10-203
P2B-LT10-207
P2B-LT10-208
P2B-LT10-60M
P2B-LT10-215
P2B-LT10-300
P2B-LT10-70M
P2B-LT10-75M
Wt.
1.70
0.77
1.60
1.50
1.40
0.64
2.80
2.70
1.22
4.20
3.90
3.80
3.70
1.77
6.00
5.80
2.72
2.63
6.80
6.60
3.08
8.00
10.10
9.80
4.58
21.20
20.90
9.98
9.62
SELECTION
PAGE B17-6
Used on
Frame
LD-10
LD-10
LD-10
LD-10
LD-20
LD-20
LD-20
LD-20
LD-20
LD-20
LD-30
LD-30
LD-40
LD-40
LD-40
LD-45
LD-45
Plummer Blocks
D
Min.
Max.
3/4
1
5-1/4
1-11/32
3-3/8
4-3/16
20mm
25.4
133.4
34.1
85.7
106.4
7/8
15/16
1-1/16
5-1/2
1-13/32
3-11/16
4-1/2
205
1
25mm
27.0
139.7
35.7
93.7
114.3
1-1/8
1-3/16
6-1/4
1-3/4
4-1/4
5
206
1-3/16
30mm
30.2
158.8
44.5
108.0
127.0
1-1/4
1-3/8
1-5/16
6-1/2
1-3/4
4-11/16
5-7/16
207
1-7/16
1-1/2
35mm
33.3
165.1
44.5
119.1
138.1
1-11/16
1-9/16
7-7/16
2
5-1/2
6-3/16
1-3/4
209
40mm
39.7
188.9
50.8
139.7
157.2
45mm
1-15/16
1-5/8
8-1/8
2-1/4
6
6-11/16
210
2
50mm
41.3
206.4
57.1
152.4
170.0
211
2-3/16
1-3/4
8-7/8
2-5/16
6-3/8
7-7/16
2-7/16
1-13/16
9-1/2
2-3/8
6-7/8
7-15/16
2-1/2
212
60mm
46.0
241.3
60.3
174.6
201.6
2-15/16
2-23/32
11-3/4
2-7/8
8-1/2
9-1/2
3
215
70mm
69.1
298.5
73.0
215.9
241.3
75mm
All Dimensions Are In Millimeters Unless Otherwise Specified
The LT and LTB Pillow Blocks Are Identical Except the LTB Pillow Blocks Have Lower Backing Dimensions
204
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
F
Bolt
Dia.
3/8
10
27/32
21.4
17/32
13.5
2-9/16
65.1
1-3/8
34.9
1-5/16
33.3
3/8
27/32
19/32
2-25/32
1-9/16
1-7/16
10
21.4
15.1
70.6
39.7
36.5
1/2
15/16
11/16
3-1/4
1-13/16
1-5/8
12
23.8
17.5
82.6
46.0
41.3
1/2
15/16
23/32
3-3/4
2-1/8
1-7/8
12
23.8
18.3
95.3
54.0
47.6
1/2
29/32
3/4
4-9/32
2-9/16
2-1/8
12
23.0
19.1
108.7
65.1
54.0
5/8
1-1/32
3/4
4-17/32
2-13/16
2-1/4
16
5/8
26.2
1-7/32
19.1
7/8
115.1
4-31/32
71.4
3-1/8
57.2
2-1/2
5/8
1-7/32
7/8
5-13/32
3-1/2
2-3/4
16
31.0
22.2
137.3
88.9
69.9
7/8
1-7/16
6-3/4
3-15/16
3-1/2
22
36.5
25.4
171.5
100.0
88.9
NOMENCLATURE
PAGE B17-5
B17-11
SELECTION
PAGE B17-6
Engineering
Part Number Index
Shaft
Size
Keyword Index
Series
Take-Up Frames
SLEEVOIL
Sleeve Bearings
3/4 THRU 3 SOLIDLUBE LT PILLOW BLOCKS
Plummer Blocks
3/4 THRU 3 SOLIDLUBE LTB PILLOW BLOCKS
Sleeve Bearings
SLEEVOIL
Series
Take-Up Frames
204
205
206
Engineering
207
209
Part Number Index
210
211
212
215
Shaft
Size
Keyword Index
3/4
20mm
7/8
15/16
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
1-1/2
35mm
1-11/16
1-3/4
40mm
45mm
1-15/16
2
50mm
2-3/16
2-7/16
2-1/2
60mm
2-15/16
3
70mm
75mm
FEATURES/BENEFITS
PAGE B17-2
Part No.
032940
034244
032941
032942
032943
034245
032945
032946
034246
032947
032949
032950
032951
034247
032953
032954
034248
034249
032955
032956
034250
032957
032959
032960
034251
034596
034597
....
....
700 SERIES
Description
P2B-LTB7-012
P2B-LTB7-20M
P2B-LTB7-014
P2B-LTB7-015
P2B-LTB7-100
P2B-LTB7-25M
P2B-LTB7-102
P2B-LTB7-103
P2B-LTB7-30M
P2B-LTB7-104
P2B-LTB7-106
P2B-LTB7-107
P2B-LTB7-108
P2B-LTB7-35M
P2B-LTB7-111
P2B-LTB7-112
P2B-LTB7-40M
P2B-LTB7-45M
P2B-LT87-115
P2B-LTB7-200
P2B-LTB7-50M
P2B-LTB7-203
P2B-LTB7-207
P2B-LTB7-208
P2B-LTB7-60M
P2B-LTB7-215
P2B-LTB7-300
....
....
Wt.
1.6
0.73
1.5
1.4
1.3
0.59
2.7
2.6
1.18
4
3.8
3.7
3.6
1.72
5
4.8
2.27
2.18
6
5.8
2.72
6.5
8.1
7.8
3.67
18.7
18.4
....
....
PAGE B17-4
Part No.
032970
034252
032971
032972
032973
034253
032975
032976
034254
032977
032979
032980
032981
034255
032983
032984
034256
034257
032985
032986
034258
032987
032989
032990
034259
034598
034599
....
....
NOMENCLATURE
PAGE B17-5
B17-12
1000 SERIES
Description
P2B-LTB10-012
P2B-LTB10-20M
P2B-LTB10-014
P2B-LTB10-015
P2B-LTB10-100
P2B-LTB10-25M
P2B-LTB10-102
P2B-LTB10-103
P2B-LTB10-30M
P2B-LTB10-104
P2B-LTB10-106
P2B-LTB10-107
P2B-LTB10-108
P2B-LTB10-35M
P2B-LTB10-111
P2B-LTB10-112
P2B-LTB10-40M
P2B-LTB10-45M
P2B-LTB10-115
P2B-LTB10-200
P2B-LTB10-50M
P2B-LTB10-203
P2B-LTB10-207
P2B-LTB10-208
P2B-LTB10-60M
P2B-LTB10-215
P2B-LTB10-300
....
....
Wt.
1.6
0.73
1.5
1.4
1.3
0.59
2.7
2.6
1.18
4
3.8
3.7
3.6
1.72
5
4.8
2.27
2.18
6
5.8
2.72
6.5
8.1
7.8
3.67
18.7
18.4
....
....
SELECTION
PAGE B17-6
Used on
Frame
LD-10
LD-10
LD-10
LD-10
LD-20
LD-20
LD-20
LD-20
LD-20
LD-20
LD-30
LD-30
LD-40
LD-40
LD-40
LD-45
LD-45
Plummer Blocks
D
Min.
Max.
3/4
1
5-1/4
1-11/32
3-3/8
4-3/16
20mm
25.4
133.4
34.1
85.7
106.4
7/8
15/16
1-1/16
5-1/2
1-13/32
3-11/16
4-1/2
205
1
25mm
27.0
139.7
35.7
93.7
114.3
1-1/8
1-3/16
6-1/4
1-3/4
4-1/4
5
206
1-3/16
30mm
30.2
158.8
44.5
108.0
127.0
1-1/4
1-3/8
1-5/16
6-1/2
1-3/4
4-11/16
5-7/16
207
1-7/16
1-1/2
35mm
33.3
165.1
44.5
119.1
138.1
1-11/16
1-9/16
7-7/16
2
5-1/2
6-3/16
1-3/4
209
40mm
39.7
188.9
50.8
139.7
157.2
45mm
1-15/16
1-5/8
8-1/8
2-1/4
6
6-11/16
210
2
50mm
41.3
206.4
57.1
152.4
170.0
211
2-3/16
1-3/4
8-7/8
2-5/16
6-3/8
7-7/16
2-7/16
1-13/16
9-1/2
2-3/8
6-7/8
7-15/16
212
2-1/2
60mm
46.0
241.3
60.3
174.6
201.6
2-15/16
2-23/32
11-3/4
2-7/8
8-1/2
9-1/2
3
215
70mm
69.1
298.5
73.0
215.9
241.3
75mm
All Dimensions Are In Millimeters Unless Otherwise Specified
The LT and LTB Pillow Blocks are Identical Except the LTB Pillow Blocks Have Lower backing Dimensions.
204
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
F
Bolt
Dia.
3/8
10
27/32
21.4
15/32
11.9
2-1/2
63.5
1-3/8
34.9
1-1/4
31.8
3/8
27/32
15/32
2-21/32
1-9/16
1-5/16
10
21.4
11.9
67.5
39.7
33.3
1/2
15/16
5/8
3-3/16
1-13/16
1-9/16
12
23.8
15.9
81.0
46.0
39.7
1/2
15/16
21/32
3-11/16
2-1/8
1-13/16
12
23.8
16.7
93.7
54.0
46.0
1/2
29/32
11/16
4-7/32
2-9/16
2-1/16
12
23.0
17.5
107.2
65.1
52.4
5/8
1-1/32
11/16
4-15/32
2-13/16
2-3/16
16
5/8
26.2
1-7/32
17.5
13/16
113.5
4-29/32
71.4
3-1/8
55.6
2-7/16
5/8
1-7/32
13/16
5-11/32
3-1/2
2-11/16
16
31.0
20.6
135.7
88.9
68.3
7/8
1-7/16
1-1/16
6-9/16
3-15/16
3-5/16
22
36.5
....
....
100.0
....
NOMENCLATURE
PAGE B17-5
B17-13
SELECTION
PAGE B17-6
Engineering
Part Number Index
Shaft
Keyword Index
Series
Size
Take-Up Frames
SLEEVOIL
Sleeve Bearings
3/4 THRU 3 SOLIDLUBE LTB PILLOW BLOCKS
Plummer Blocks
3-7/16 THRU 5 SOLIDLUBE MM PILLOW BLOCKS
Sleeve Bearings
J
L
G
M
SLEEVOIL
D (MIN.-MAX.)
Take-Up Frames
Shaft
Size
Engineering
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
700 Series
Part No.
Description
033247
P2B-MM7-307
033251
P2B-MM7-308
033475
P2B-MM7-315
033485
P2B-MM7-400
033500
P2B-MM7-407
033510
P2B-MM7-408
033525
P4B-MM7-415
033535
P4B-MM7-500
Shaft
Size
Part Number Index
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
Part No.
033347
033351
033480
033490
033505
033515
033530
033540
2 Bolt Base
F Bolt
Dia.
1000 Series
Description
P2B-MM10-307
P2B-MM10-308
P2B-MM10-315
P2B-MM10-400
P2B-MM10-407
P2B-MM10-408
P4B-MM10-415
P4B-MM10-500
4 Bolt Base
F Bolt
E
Dia.
Wt.
23.00
22.80
36.00
35.80
60.00
59.70
92.00
91.50
Used On
Frame
HD-250
3-1/2
12
2-13/16
HD-300
13-7/16
3-3/16
HD-350
4-1/2
16
3-7/16
HD-400
17-7/16
4-3/4
...
1-1/4
1-3/4
4-7/8
3-1/4
7- 1/4
...
...
1-11/16
7-15/16
5-5/8
3-3/4
8-3/16
7/8
...
...
1-1/2
2-1/4
9-7/16
6-15/16
4-1/2
10
...
3/4
1-11/16
2-3/4
10-1/2
7-9/16
10-5/8
Min.
Max.
9-1/4
10-1/4
5/8
...
9-7/8
11-1/2
3/4
12-13/16
13-13/16
13-1/8
14-3/4
No Published Metric Dimensions For This Product
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-14
SELECTION
PAGE B17-6
Plummer Blocks
3-7/16 THRU 5 SOLIDLUBE MM 4-BOLT FLANGE BEARINGS
Wt.
17.00
18.00
26.00
42.00
3-1/2
7-5/8
2-59/64
3/16
5/8
8-9/16
5/8
4- 7/8
8-7/8
3-11/32
6-7/8
1/4
3/4
9-1/2
11/16
5- 5/8
4-1/2
10-1/4
3-23/32
8-1/8
1/4
7/8
11-3/8
3/4
6-15/16
11-7/16
4- 5/8
9-3/16
1/8
12-7/8
13/16
7- 9/16
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-15
SELECTION
PAGE B17-6
Engineering
62.00
Part Number Index
Shaft
Size
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
1000 Series
Part No.
Description
033868
F4B-MM10-307
033931
F4B-MM10-308
033899
F4B-MM10-315
033932
F4B-MM10-400
033933
F4B-MM10-407
033934
F4B-MM10-408
033869
F4B-MM10-415
033867
F4B-MM10-500
Keyword Index
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
700 Series
Part No.
Description
033323
F4B-MM7-307
033321
F4B-MM7-308
032923
F4B-MM7-315
032937
F4B-MM7-400
033862
F4B-MM7-407
033863
F4B-MM7-408
033929
F4B-MM7-415
033930
F4B-MM7-500
Take-Up Frames
G
Shaft
Size
SLEEVOIL
Sleeve Bearings
Plummer Blocks
3/4 THRU 2 SOLIDLUBE LT 2-BOLT FLANGE BEARING

M
N
Sleeve Bearings
D
SLEEVOIL
Take-Up Frames
F
Series
204
205
Engineering
206
207
Part Number Index
209
210
Shaft
Size
3/4
20mm
7/8
15/16
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
1-1/2
35mm
1-11/16
1-3/4
40mm
45mm
1-15/16
2
50mm
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
Part No.
033085
034260
033086
033087
033088
034261
033089
033090
034262
033091
033092
033093
033094
034263
033095
033096
034218
034264
033097
033098
034265
700 Series
Description
F2B-LT7-012
F2B-LT7-20M
F2B-LT7-014
F2B-LT7-015
F2B-LT7-100
F2B-LT7-25M
F2B-LT7-102
F2B-LT7-103
F2B-LT7-30M
F2B-LT7-104
F2B-LT7-106
F2B-LT7-107
F2B-LT7-108
F2B-LT7-35M
F2B-LT7-111
F2B-LT7-112
F2B-LT7-40M
F2B-LT7-45M
F2B-LT7-115
F2B-LT7-200
F2B-LT7-50M
PAGE B17-4
Wt.
1.2
0.54
1.7
1.6
1.5
0.68
2.2
2.1
0.95
3.6
3.3
3.2
3.1
1.5
4.9
4.7
2.22
2.13
5.4
5.2
2.36
Part No.
033185
034266
033186
033187
033188
034267
033189
033190
034268
033191
033192
033193
033194
034269
033195
033196
034270
034271
033197
033198
034272
NOMENCLATURE
PAGE B17-5
B17-16
1000 Series
Description
F2B-LT10-012
F2B-LT10-20M
F2B-LT10-014
F2B-LT10-015
F2B-LT10-100
F2B-LT10-25M
F2B-LT10-102
F2B-LT10-103
F2B-LT10-30M
F2B-LT10-104
F2B-LT10-106
F2B-LT10-107
F2B-LTI0-108
F2B-LT10-35M
F2B-LT10-111
F2B-LT10-112
F2B-LT10-40M
F2B-LT10-45M
F2B-LT10-115
F2B-LT10-200
F2B-LT10-50M
SELECTION
PAGE B17-6
Wt.
1.2
0.54
1.7
1.6
1.5
0.68
2.2
2.1
0.95
3.6
3.3
3.2
3.1
1.5
4.9
4.7
2.22
2.13
5.4
5.2
2.36
Plummer Blocks
206
207
209
210
FEATURES/BENEFITS
PAGE B17-2
3-17/32
89.7
1/2
12.7
5/32
4.0
1-3/8
34.9
2-3/8
60.3
1-1/2
38.1
1-1/8
3-57/64
7/16
1/2
5/32
1-9/16
2-3/4
1-7/16
123.8
28.6
98.8
7/16
12.7
4.0
39.7
69.9
36.5
1-7/64
5-9/16
1-7/32
4-19/32
7/16
1/2
5/32
1-13/16
3-1/8
1-9/16
28.2
141.3
31.0
116.7
7/16
12.7
4.0
46.0
79.4
39.7
1-7/32
6-1/8
1-3/8
5-1/8
1/2
9/16
5/32
2-1/8
3-3/4
1-27/32
31.0
155.6
34.9
130.2
1/2
14.3
4.0
54.0
95.3
46.8
1-21/64
7-1/I6
1-19/32
5-27/32
1/2
5/8
3/16
2-9/16
4-3/8
1-29/32
33.7
179.4
40.5
148.4
1/2
15.9
4.8
65.1
111.1
48.4
1-13/32
7-7/16
1-21/32
6-3/16
1/2
5/8
3/16
2-13/16
4-9/32
2-1/32
35.7
188.9
42.1
157.2
1/2
15.9
4.8
71.4
108.7
51.6
29/32
23.0
4-13/16
122.2
1-1/8
28.6
63/64
4-7/8
25.4
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-17
SELECTION
PAGE B17-6
Engineering
205
3/4
20mm
7/8
15/16
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
1-1/2
35mm
1-11/16
1-3/4
40mm
45mm
1-15/16
2
50mm
F
Bolt
Dia.
3/8
3/8
Part Number Index
204
Shaft
Size
Keyword Index
Series
Take-Up Frames
SLEEVOIL
Sleeve Bearings
Plummer Blocks

B
Sleeve Bearings
SLEEVOIL
Series
204
205
Take-Up Frames
206
207
Engineering
209
210
211
Part Number Index
212
215
Shaft
Size
3/4
20mm
7/8
15/16
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
1-1/2
35mm
1-11/16
1-3/4
40mm
45mm
1-15/16
2
50mm
2-3/16
2-7/16
2-1/2
60mm
2-15/16
3
70mm
75mm
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
Part No.
033260
034273
033261
033262
033263
034274
033264
033265
034275
033266
033267
033268
033269
034276
033270
033271
034277
034278
033272
033273
034279
033274
033275
033276
034280
033277
033278
034281
034282
700 Series
Description
F4B-LT7-012
F4B-LT7-20M
F4B-LT7-014
F4B-LT7-015
F4B-LT7-100
F4B-LT7-25M
F4B-LT7-102
F4B-LT7-103
F4B-LT7-30M
F4B-LT7-104
F4B-LT7-106
F4B-LT7-107
F4B-LT7-108
F4B-LT7-35M
F4B-LT7-111
F4B-LT7-112
F4B-LT7-40M
F4B-LT7-45M
F4B-LT7-115
F4B-LT7-200
F4B-LT7-50M
F4B-LT7-203
F4B-LT7-207
F4B-LT7-208
F4B-LT7-60M
F4B-LT7-215
F4B-LT7-300
F4B-LT7-70M
F4B-LT7-75M
PAGE B17-4
Wt.
1.5
0.68
2.2
2.1
2
0.91
2.9
2.8
1.27
4.3
4
3.9
3.8
1.81
5.8
5.6
2.63
2.54
6.8
6.6
3
8.5
11
10.8
5
18
17.7
8.16
8.03
Part No.
033200
034283
033201
033202
033203
034284
033204
033205
034285
033206
033207
033208
033209
034286
033210
033211
034287
034288
033212
033213
034289
033214
033215
033216
034290
033217
033218
034291
034292
NOMENCLATURE
PAGE B17-5
B17-18
1000 Series
Description
F4B-LT10-012
F4B-LT10-20M
F4B-LT10-014
F4B-LT10-015
F4B-LT10-100
F4B-LT10-25M
F4B-LT10-102
F4B-LT10-103
F4B-LT10-30M
F4B-LT10-104
F4B-LT10-106
F4B-LT10-107
F4B-LT10-108
F4B-LT10-35M
F4B-LT10-111
F4B-LT10-112
F4B-LT10-40M
F4B-LT10-45M
F4B-LT10-115
F4B-LT10-200
F4B-LT10-50M
F4B-LT10-203
F4B-LT10-207
F4B-LT10-208
F4B-LT10-60M
F4B-LT10-215
F4B-LT10-300
F4B-LT10-70M
F4B-LT10-75M
SELECTION
PAGE B17-6
Wt.
1.5
0.6
2.2
2.1
2
0.91
2.9
2.8
1.27
4.3
4
3.9
3.8
1.81
5.8
5.6
2.63
2.54
6.8
6.6
3
8.5
11
10.8
5
18
17.7
8.16
8.03
Plummer Blocks
FEATURES/BENEFITS
PAGE B17-2
7/16
11.1
5/32
3.2
1-3/8
34.9
1-1/8
2-3/4
7/16
1/2
3/16
1-9/16
95.2
28.6
69.9
10.0
12.7
4.8
39.7
4-1/4
1-7/32
3-1/4
7/16
1/2
5/32
1-13/16
108.0
31.0
82.6
10.0
12.7
4.0
46.0
4-3/4
1-3/8
3-5/8
1/2
9/16
5/32
2-1/8
120.7
34.9
92.1
12.0
14.3
4.0
54.0
5-3/8
1-19/32
4-1/8
1/2
5/8
13/64
2-9/16
136.5
40.5
104.8
12.0
15.9
4.8
65.1
5-5/8
1-21/32
4-3/8
1/2
5/8
7/32
2-13/16
142.9
6-1/2
42.1
1-25/32
111.1
5-1/8
12.0
5/8
15.9
11/16
4.8
7/32
71.4
3-1/8
1-31/32
5-5/8
5/8
11/16
11/64
3-1/2
177.8
47.6
142.9
16.0
17.5
4.0
88.9
7-3/4
2-3/4
3/4
17/32
3-15/16
196.9
70.6
152.4
18.0
25.4
13.5
100.0
3-3/8
85.7
1-1/8
28.6
3-3/4
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-19
SELECTION
PAGE B17-6
Take-Up Frames
Engineering
Part Number Index
2-1/2
63.5
F
Bolt
3/8
10.0
Keyword Index
Shaft
A
Size
3/4
29/32
204
20mm
23.0
7/8
15/16
63/64
205
1
25mm
25.4
1-1/8
31/32
206
1-3/16
30mm
28.2
1-1/4
1-3/8
1-7/32
207
1-7/16
1-1/2
35mm
31.0
1-11/16
1-11/32
1-3/4
209
40mm
33.7
45mm
1-15/16
1-13/32
210
2
50mm
35.7
211
2-3/16
1-17/32
2-7/16
1-15/32
212
2-1/2
60mm
41.3
2-15/16
2-23/32
3
215
70mm
61.1
75mm
All Dimensions Are in Millimeters Unless Otherwise Specified.
Series
SLEEVOIL
Sleeve Bearings
Plummer Blocks
3/4 THRU 2-1/2 SOLIDLUBE LT NARROW SLOT TAKE-UP BEARINGS
Sleeve Bearings
SLEEVOIL
Series
204
Take-Up Frames
205
206
Engineering
207
209
Part Number Index
210
211
212
Shaft
Size
3/4
20mm
7/8
15/16
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
1-1/2
35mm
1-11/16
1- 3/4
40mm
45mm
1-15/16
2
50mm
2-3/16
2-7/16
2-1/2
60mm
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
Part No.
033810
034293
033811
033812
033813
034294
033814
033815
034295
033816
033817
033818
033819
034296
033820
033821
034297
034298
033822
033823
034299
033824
033825
033826
034300
LT700
Description
NSTU-LT7-012
NSTU-LT7-20M
NSTU-LT7-014
NSTU-LT7-015
NSTU-LT7-100
NSTU-LT7-25M
NSTU-LT7-102
NSTU-LT7-103
NSTU-LT7-30M
NSTU-LT7-104
NSTU-LT7-106
NSTU-LT7-107
NSTU-LT7-108
NSTU-LT7-35M
NSTU-LT7-111
NSTU-LT7-112
NSTU-LT7-40M
NSTU-LT7-45M
NSTU-LT7-115
NSTU-LT7-200
NSTU-LT7-50M
NSTU-LT7-203
NSTU-LT7-207
NSTU-LT7-208
NSTU-LT7-60M
Wt.
1.7
0.77
1.9
1.8
1.7
0.77
2.8
2.7
1.22
3.2
3.0
2.9
2.8
1.36
4.9
4.8
2.22
2.18
5.5
5.3
2.4
6.7
7.4
7.0
3.18
PAGE B17-4
Part No.
033840
034303
033841
033842
033843
034304
033844
033845
034305
033846
033847
033848
033849
034306
033850
033851
034307
034308
033852
033853
034309
033854
033855
033856
034310
NOMENCLATURE
PAGE B17-5
B17-20
LT1000
Description
NSTU-LT10-012
NSTU-LT10-20M
NSTU-LT10-014
NSTU-LT10-015
NSTU-LT10-100
NSTU-LT10-25M
NSTU-LT10-102
NSTU-LT10-103
NSTU-LT10-30M
NSTU-LT10-104
NSTU-LT10-106
NSTU-LT10-107
NSTU-LT10-108
NSTU-LT10-35M
NSTU-LT10-111
NSTU-LT10-112
NSTU-LT10-40M
NSTU-LT10-45M
NSTU-LT10-115
NSTU-LT10-200
NSTU-LT10-50M
NSTU-LT10-203
NSTU-LT10-207
NSTU-LT10-208
NSTU-LT10-60M
Wt.
1.7
0.77
1.9
1.8
1.7
0.77
2.8
2.7
1.22
3.2
3.0
2.9
2.8
1.36
4.9
4.8
2.22
2.18
5.5
5.3
2.4
6.7
7.4
7.0
3.18
SELECTION
PAGE B17-6
Used
On Frame
NS-210
NS-210
NS-210
NS-210
NS-308
NS-308
NS-308
NS-308
NS-400
NS-400
NS-400
NS-400
NS-407
NS-415
NS-415
205
206
207
209
210
211
212
Series
204
205
206
207
209
210
211
212
Shaft
Size
3/4
20mm
7/8, 15/16, 1
25mm
1-1/8
1-3/16
30mm
1-1/4, 1-3/8,
1-7/16, 1-1/2
35mm
1-11/16, 1-3/4
40mm
45mm
1-15/16, 2
50mm
2-3/16
2-7/16, 2-1/2
60mm
FEATURES/BENEFITS
PAGE B17-2
2-3/16
55.6
2-3/16
55.6
7/16
11.1
7/16
11.1
2-1/2
2-11/16
3/4
7/16
6.4
63.5
68.3
3/4
11.1
4-1/2
1/4
2-1/2
2-11/16
3/4
7/16
33.3
1- 9/16
114.3
5- 7/16
6.4
5/16
63.5
3
68.3
3-1/4
3/4
7/8
11.1
1/2
39.7
138.1
7.9
76.2
82.6
7/8
12.7
1- 5/8
41.3
1- 3/4
1-13/16
46
5- 1/2
139.7
6- 1/8
6-11/16
169.9
5/16
7.9
5/16
5/16
7.9
3
76.2
3-1/2
3-3/4
95.3
3-1/4
82.6
3-5/8
3-7/8
95.3
7/8
7/8
1
1
1
1/2
12.7
19/32
19/32
15.1
1
25.4
1-1/16
27
3-1/2
88.9
3-9/16
90.5
1/4
6.4
1/4
6.4
1-1/2
38.1
1-1/2
38.1
1-3/16
4-5/16
1/4
30.2
109.5
1-5/16
7/8
22.2
7/8
22.2
1-3/8
34.9
1-3/8
34.9
1-3/8
34.9
1-9/16
39.7
2-5/8
66.7
2-5/8
66.7
3-1/8
79.4
3-1/8
79.4
P
Pin
Dia.
5/16
5/16
5/16
5/16
15/16
1-3/8
1-13/16
3-1/2
4-1/8
5/16
23.8
34.9
46.0
88.9
104.8
5/16
15/16
1-3/8
2-1/8
3-1/2
4-1/8
5/16
23.8
1-7/32
34.9
1-5/8
54.0
2-9/16
88.9
4
104.8
4-3/4
5/16
3/8
31.0
41.3
65.1
101.6
120.7
3/8
1-3/32
27.8
1-9/32
1-9/32
32.5
1-5/8
41.3
1-5/8
1-3/4
41.3
2-13/16
71.4
3- 1/2
3-1/8
88.9
4
101.6
4-15/16
4-7/16
125.4
4-3/4
120.7
5-3/4
5-3/8
146.1
3/8
3/8
7/16
7/16
7/16
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-21
SELECTION
PAGE B17-6
SLEEVOIL
3/4
20mm
7/8, 15/16, 1
25mm
1-1/8
1-3/16
30mm
1-1/4, 1-3/8,
1-7/16, 1-1/2
35mm
1-11/16, 1-3/4
40mm
45mm
1-15/16, 2
50mm
2-3/16
2-7/16, 2-1/2
60mm
204
F
Screw
Dia.
3/4
3/4
3/4
3/4
Take-Up Frames
Shaft
Size
Engineering
Series
Part Number Index
3/4 THRU 2-1/2 SOLIDLUBE LT NARROW SLOT TAKE-UP BEARINGS
Keyword Index
Sleeve Bearings
Plummer Blocks
Plummer Blocks
3/4 THRU 3 SOLIDLUBE LT WIDE SLOT TAKE-UP BEARINGS
Sleeve Bearings
H
C
G
E
SLEEVOIL
Series
204
205
Take-Up Frames
206
207
Engineering
209
210
211
Part Number Index
212
215
Shaft
Size
3/4
20mm
7/8
15/16
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
1-1/2
35mm
1-11/16
1- 3/4
40mm
45mm
1-15/16
2
50mm
2-3/16
2-7/16
2-1/2
60mm
2-15/16
3
70mm
75mm
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
Part No.
033870
034313
033871
033872
033873
034314
033874
033875
034315
033876
033877
033878
033879
034316
033880
033881
034317
034318
033882
033883
034319
033884
033885
033886
034320
033887
033888
034321
034322
LT700
Description
WSTU-LT7-012
WSTU-LT7-20M
WSTU-LT7-014
WSTU-LT7-015
WSTU-LT7-100
WSTU-LT7-25M
WSTU-LT7-102
WSTU-LT7-103
WSTU-LT7-30M
WSTU-LT7-104
WSTU-LT7-106
WSTU-LT7-107
WSTU-LT7-108
WSTU-LT7-35M
WSTU-LT7-111
WSTU-LT7-112
WSTU-LT7-40M
WSTU-LT7-45M
WSTU-LT7-115
WSTU-LT7-200
WSTU-LT7-50M
WSTU-LT7-203
WSTU-LT7-207
WSTU-LT7-208
WSTU-LT7-60M
WSTU-LT7-215
WSTU-LT7-300
WSTU-LT7-70M
WSTU-LT7-75M
Wt.
2.4
1.09
2.6
2.5
2.4
1.09
3.2
3.1
1.41
4.2
3.9
3.8
3.7
1.77
6.1
6
2.77
2.72
6.7
6.5
2.95
9.8
10.1
9.8
4.58
13
12.5
5.9
5.67
PAGE B17-4
Part No.
033910
034323
033911
033912
033913
034324
033914
033915
034325
033916
033917
033918
033919
034326
033920
033921
034327
034328
033922
033923
034329
033924
033925
033926
034330
033927
033928
034331
034332
NOMENCLATURE
PAGE B17-5
B17-22
LT1000
Description
WSTU-LT10-012
WSTU-LT10-20M
WSTU-LT10-014
WSTU-LT10-015
WSTU-LT10-100
WSTU-LT10-25M
WSTU-LT10-102
WSTU-LT10-103
WSTU-LT10-30M
WSTU-LT10-104
WSTU-LT10-106
WSTU-LT10-107
WSTU-LT10-108
WSTU-LT10-35M
WSTU-LT10-111
WSTU-LT10-112
WSTU-LT10-40M
WSTU-LT10-45M
WSTU-LT10-115
WSTU-LT10-200
WSTU-LT10-50M
WSTU-LT10-203
WSTU-LT10-207
WSTU-LT10-208
WSTU-LT10-60M
WSTU-LT10-215
WSTU-LT10-300
WSTU-LT10-70M
WSTU-LT10-75M
Wt.
2.4
1.09
2.6
2.5
2.4
1.09
3.2
3.1
1.41
4.2
3.9
3.8
3.7
1.77
6.1
6
2.77
2.72
6.7
6.5
2.95
9.8
10.1
9.8
4.58
13
12.5
5.9
5.67
SELECTION
PAGE B17-6
Used on
Frame
WS-300
WS-300
WS-300
WS-300
WS-308
WS-308
WS-308
WS-308
WS-400
WS-400
WS-400
WS-400
WS-502
WS-502
WS-502
WS-515
WS-515
Plummer Blocks
Sleeve Bearings
3/4 THRU 3 SOLIDLUBE LT WIDE SLOT TAKE-UP BEARINGS
207
209
210
211
212
215
Series
204
205
206
207
209
210
211
212
215
Shaft
Size
3/4
20mm
7/8, 15/16, 1
25mm
1-1/8, 1-3/16
30mm
1-1/4, 1-3/8
1-7/16, 1-1/2
35mm
1-11/16,1-3/4
40mm, 45mm
1-15/16, 2
50mm
2-3/16
2-7/16, 2-1/2
60mm
2-15/16, 3
70mm, 75mm
FEATURES/BENEFITS
PAGE B17-2
2-1/2
3-1/16
7/8
1/2
13.5
11/16
17.5
11/16
17.5
1-1/16
1-1/16
27.0
1-1/16
27.0
63.5
3-1/4
82.6
3-3/8
85.7
3-3/4
4
101.6
4-3/4
120.7
77.8
3-7/16
87.3
3-9/16
90.5
4-3/16
4-11/16
119.1
5-1/2
139.7
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-9/16
1-9/16
23.7
5/8
15.9
5/8
15.9
3/4
3/4
19.1
13/16
20.6
5/8
15.9
5/8
15.9
5/8
15.9
2
50.8
2
50.8
2-3/16
55.6
1-1/4
31.8
1-5/16
33.3
1-7/16
36.5
1-3/8
34.9
1-9/16
39.7
1-13/16
46.0
3
76.2
3
76.2
3-1/2
88.9
3-5/8
92.1
3-5/8
92.1
4-1/8
104.8
1-3/8
34.9
1-3/8
34.9
1-5/8
41.3
5/8
2-1/2
1-7/16
2-1/8
3-1/2
4-1/8
1-5/8
15.9
3/4
19.1
3/4
19.1
1
1-1/4
31.8
1-1/4
31.8
63.5
3-1/4
82.6
3-1/4
82.6
4
4
101.6
4-3/8
111.1
36.5
1-15/16
49.2
1-15/16
49.2
2-1/2
2-1/2
63.5
2-3/4
69.9
54.0
2-9/16
65.1
2-13/16
71.4
3-1/8
3-1/2
88.9
3-15/16
100.0
88.9
4
101.6
4
101.6
5-1/8
5-1/8
130.2
5-15/16
150.8
104.8
4-3/4
120.7
4-3/4
120.7
5-7/8
5-7/8
149.2
6-11/16
169.9
41.3
1-15/16
49.2
1-15/16
49.2
2-1/2
2-1/2
63.5
2-3/4
69.9
1
25.4
1-1/16
27.0
1- 3/16
30.2
3-11/16
93.7
3-13/16
96.8
4- 3/8
111.1
17/32
13.5
17/32
13.5
17/32
13.5
2
50.8
2
50.8
2-1/4
57.2
1- 5/16
4- 7/8
17/32
33.3
1- 9/16
39.7
1-5/8
41.3
1-3/4
1-13/16
46.0
2-23/32
69.1
123.8
5- 5/8
142.9
5-13/16
147.6
6-11/16
7-1/2
190.5
9-1/8
231.8
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-23
SELECTION
PAGE B17-6
SLEEVOIL
Take-Up Frames
206
3/8
9.5
3/8
9.5
3/8
9.5
Engineering
205
2-3/8
60.3
2-7/16
61.9
2-3/4
69.9
F
Dia.
3/4
3/4
13/16
13/16
7/8
7/8
Part Number Index
204
Shaft
Size
3/4
20mm
7/8, 15/16, 1
25mm
1-1/8, 1-3/16
30mm
1-1/4, 1-3/8
1-7/16, 1-1/2
35mm
1-11/16,1-3/4
40mm, 45mm
1-15/16, 2
50mm
2-3/16
2-7/16, 2-1/2
60mm
2-15/16, 3
70mm, 75mm
Keyword Index
Series
Plummer Blocks
1-15/16 THRU 3 TYPE GLT SOLIDLUBE TAKE-UP BEARINGS
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Shaft
Size
Part Number Index
1-15/16
2
2-3/16
2-7/16
2-1/2
2-15/16
3
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
700 Series
Part No.
033739
033740
033741
033742
033743
033744
033745
Description
TP-GLT7-115
TP-GLT7-200
TP-GLT7-203
TP-GLT7-207
TP-GLT7-208
TP-GLT7-215
TP-GLT7-300
Part No.
033750
033751
033752
033753
033754
033755
033756
PAGE B17-4
1000 Series
Description
TP-GLT10-115
TP-GLT10-200
TP-GLT10-203
TP-GLT10-207
TP-GLT10-208
TP-GLT10-215
TP-GLT10-300
NOMENCLATURE
PAGE B17-5
B17-24
Wt.
Frame
Size
10.1
TP10
11.8
TP20
14.1
TP30
17.0
TP40
SELECTION
PAGE B17-6
Plummer Blocks
1-5/8
6-1/2
2-3/8
3-1/4
6-3/8
2-13/16
2-3/8
1-3/4
2-1/2
6-3/4
3-3/8
6-7/8
3-1/8
2-3/8
1-13/16
7-1/2
2-3/4
3-1/2
7-7/16
3-1/2
2-3/4
2-23/32
8-1/2
2-1/2
8-5/16
3-15/16
2-3/4
FEATURES/BENEFITS
PAGE B17-2
Part Number Index
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-25
SELECTION
PAGE B17-6
Keyword Index
Shaft
Size
1-15/16
2
2-3/16
2-7/16
2-1/2
2-15/16
3
Engineering
Take-Up Frames
SLEEVOIL
Sleeve Bearings
1-15/16 THRU 3 TYPE GLT SOLIDLUBE TAKE-UP BEARINGS
Plummer Blocks
3/4 THRU 3 SOLIDLUBE LT INSERTS
Sleeve Bearings
SLEEVOIL
Shaft
Size
Series
204
Take-Up Frames
205
206
207
Engineering
209
210
Part Number Index
211
212
215
3/4
20mm
7/8
15/16
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
1-1/2
35mm
1-11/16
1-3/4
40mm
45mm
1-15/16
2
50mm
2-3/16
2-7/16
2-1/2
60mm
2-15/16
3
70mm
75mm
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
Part No.
033585
034454
033586
033587
033588
034456
033589
033590
034458
033591
033592
033593
033594
034460
033595
033596
034462
034464
033597
033598
034466
033599
033600
033601
034468
033602
034117
034470
034472
700 Series
LT700 Series
Description
INS-LT7-012
INS-LT7-20M
INS-LT7-014
INS-LT7-015
INS-LT7-100
INS-LT7-25M
INS-LT7-102
INS-LT7-103
INS-LT7-30M
INS-LT7-104
INS-LT7-106
INS-LT7-107
INS-LT7-108
INS-LT7-35M
INS-LT7-111
INS-LT7-112
INS-LT7-40M
INS-LT7-45M
INS-LT7-115
INS-LT7-200
INS-LT7-50M
INS-LT7-203
INS-LT7-207
INS-LT7-208
INS-LT7-60M
INS-LT7-215
INS-LT7-300
INS-LT7-70M
INS-LT7-75M
PAGE B17-4
Wt.
Part No.
0.30
0.14
0.50
0.40
0.30
0.14
0.70
0.60
0.32
1.20
1.00
0.90
0.80
0.45
1.60
1.40
0.73
0.64
1.80
1.60
0.73
2.30
3.20
3.00
1.45
5.80
5.50
033610
034455
033611
033612
033613
034457
033614
033615
034459
033616
033617
033618
033619
034461
033620
033621
034463
034465
033622
033623
034467
033624
033625
033626
034469
033627
034525
034471
034473
2.50
NOMENCLATURE
PAGE B17-5
B17-26
1000 Series
LT1000 Series
Description
INS-LT10-012
INS-LT10-20M
INS-LT10-014
INS-LT10-015
INS-LT10-100
INS-LT10-25M
INS-LT10-102
INS-LT10-103
INS-LT10-30M
INS-LT10-104
INS-LT10-106
INS-LT10-107
INS-LT10-108
INS-LT10-35M
INS-LT10-111
INS-LT10-112
INS-LT10-40M
INS-LT10-45M
INS-LT10-115
INS-LT10-200
INS-LT10-50M
INS-LT10-203
INS-LT10-207
INS-LT10-208
INS-LT10-60M
INS-LT10-215
INS-LT10-300
INS-LT10-70M
INS-LT10-75M
SELECTION
PAGE B17-6
Wt.
0.30
0.14
0.50
0.40
0.30
0.14
0.70
0.60
0.32
1.20
1.00
0.90
0.80
0.45
1.60
1.40
0.73
0.64
1.80
1.60
0.73
2.30
3.20
3.00
1.45
5.80
5.50
2.50
Plummer Blocks
207
209
210
211
212
215
FEATURES/BENEFITS
PAGE B17-2
1
25.4
5/8
15.9
1-3/8
34.9
1.8445/1.8425
46.850 / 46.800
1-1/16
5/8
1-9/16
2.0415/2.0395
27.0
15.9
39.7
51.854 / 51.803
1-3/16
11/16
1-13/16
2.435/2.433
30.2
17.5
46.0
61.849 / 61.798
1-5/16
13/16
2-1/8
2.829/2.827
33.3
20.6
54.0
71.857 / 71.806
1-9/16
13/16
2-9/16
3.3415/3.3395
39.7
20.6
65.1
84.874 / 84.823
1-5/8
7/8
2-13/16
3.5375/3.5355
41.3
1-3/4
22.2
15/16
71.4
3-1/8
89.853 / 89.802
3.932/3.930
1-13/16
1-1/16
3-1/2
4.326/4.324
46.0
27.0
88.9
109.880 / 109.830
2-23/32
1-3/16
3-15/16
5.1135/5.1115
69.1
30.2
100.0
129.883 / 129.832
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-27
SELECTION
PAGE B17-6
Take-Up Frames
206
Engineering
205
Part Number Index
204
Shaft
Size
3/4
20mm
7/8
15/16
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
1-1/2
35mm
1-11/16
1-3/4
40mm
45mm
1-15/16
2
50mm
2-3/16
2-7/16
2-1/2
60mm
2-15/16
3
70mm
75mm
Keyword Index
Series
SLEEVOIL
Sleeve Bearings
3/4 THRU 3 SOLIDLUBE LT INSERTS
Plummer Blocks
3-7/16 THRU 5 SOLIDLUBE MM BEARING INSERTS
Sleeve Bearings
SLEEVOIL
C
A
Take-Up Frames
Shaft
Size
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
Part No.
034438
034440
034442
034444
034446
034448
034450
034452
Engineering
Part Number Index
Shaft
Size
Wt.
3-7/16
3-1/2
3-15/16
4
4-7/16
4-1/2
4-15/16
5
6.4
6.2
10.0
9.8
20.0
19.7
27.0
26.5
700 Series
Description
INS-MM7-307
INS-MM7-308
INS-MM7-315
INS-MM7-400
INS-MM7-407
INS-MM7-408
INS-MM7-415
INS-MM7-500
1000 Series
Part No.
Description
034439
INS-MM10-307
034441
INS-MM10-308
034443
INS-MM10-315
034445
INS-MM10-400
034447
INS-MM10-407
034449
INS-MM10-408
034451
INS-MM10-415
034453
INS-MM10-500
Wt.
6.4
6.2
10.0
9.8
20.0
19.7
27.0
26.5
L
Dia.
S
Spherical Dia.
3-1/2
7/8
4-7/8
5.182/5.180
1-1/8
5-5/8
6.057/6.055
4-1/2
1-1/4
6-15/16
7.370/7.367
1-3/8
7-9/16
7.995/7.992
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-28
SELECTION
PAGE B17-6
Plummer Blocks
Sleeve Bearings
7/8 THRU 1-1/2 SOLIDLUBE LT CYLINDERICAL UNITS
SLEEVOIL
Shaft
Size
7/8
15/16
1
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
LT700
Description
CYL-LT7-014
CYL-LT7-015
CYL-LT7-100
CYL-LT7-102
CYL-LT7-103
CYL-LT7-104
CYL-LT7-106
CYL-LT7-107
CYL-LT7-108
Wt.
1.5
29.0
3.0
Part Number
422596
422595
422597
492598
422599
422600
422601
422602
422603
LT1000
Description
CYL-LT10-014
CYL-LT10-015
CYL-LT10-100
CYL-LT10-102
CYL-LT10-103
CYL-LT10-104
CYL-LT10-106
CYL-LT10-107
CYL-LT10-108
Wt.
1.5
2.9
3.0
D Dia.
+.000
-.002
1-1/16
27/32
3-1/8
1- 9/16
1-3/16
15/16
3-1/2
1-13/16
1- 5/16
1-1/16
3-7/8
2-1/8
Engineering
7/8
15/16
1
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
Part Number
033961
033960
033962
033963
033964
033965
033966
033967
033968
Part Number Index
Shaft
Size
Take-Up Frames
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-29
SELECTION
PAGE B17-6
Keyword Index
Plummer Blocks
1-15/16 THRU 2-1/2

SOLIDLUBE LT SCREW CONVEYOR HANGER BEARING
Sleeve Bearings
PIPE LOCK NUT

D
F STRAIGHT PIPE TAP

M
G
SLEEVOIL
Take-Up Frames
Series
210
212
Series
Engineering
210
212
Shaft
Size
Shaft
Size
1-15/16
2
2-7/16
2-1/2
LT700 Series
Description
SCHB-LT7-115
SCHB-LT7-200
SCHB-LT7-207
SCHB-LT7-208
Part No.
033937
033938
033939
033940
1-15/16
2
2-7/16
2-1/2
Wt.
5.8
5.7
7.1
7.0
LT1000 Series
Description
SCHB-LT10-115
SCHB-LT10-200
SCHB-LT10-207
SCHB-LT10-208
Part No.
033952
033953
033954
033955
Wt.
1.9
2.0
5.0
4.8
F#
1-5/8
4-5//8
7/8
15/16
13/16
1-1/8
5-9/16
1-3/32
2-13/16
3-1/4
1-13/16
5-1/2
1-5/32
1-5/32
1-1/4
1-1/8
1-7/16
6-3/4
1-1/4
3-1/2
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-30
SELECTION
PAGE B17-6
Plummer Blocks
1-1/8 THRU 2 SOLIDLUBE LT HANGER BEARINGS
Sleeve Bearings
M PLUNGER SCREW
SLEEVOIL
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-15/16
2
Take-Up Frames
Wt.
Part No.
033900
033901
033902
033903
033904
033905
033906
033907
Description
HNG-LT10-102
HNG-LT10-103
HNG-LT10-104
HNG-LT10-106
HNG-LT10-107
HNG-LT10-108
HNG-LT10-115
HNG-LT10-200
1-3/16
3-5/8
1-13/16
1/2
1-5/16
4-1/4
3-1/2
2-1/8
1/2
1-5/8
4-3/16
2-13/16
5/8
1.9
2.0
3.1
3.0
2.9
2.8
5.0
4.8
Engineering
Shaft
Size
LT1000
Description
HNG-LT7-102
HNG-LT7-103
HNG-LT7-104
HNG-LT7-106
HNG-LT7-107
HNG-LT7-108
HNG-LT7-115
HNG-LT7-200
Part Number Index
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-15/16
2
LT700
Part No.
033890
033891
033892
033893
033894
033895
033896
033897
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-31
SELECTION
PAGE B17-6
Keyword Index
Shaft
Size
Plummer Blocks
3/4 THRU 1-1/2 SOLIDLUBE LM800 PILLOW BLOCKS
A
S
Sleeve Bearings
F
J
M
SLEEVOIL
G
B
Take-Up Frames
Engineering
Shaft
Size
Part
No.
Description
Wt.
3/4
1
1-1/4
1-1/2
033692
033693
033694
033695
P2B-LM8-012
P2B-LM8-100
P2B-LM8-104
P2B-LM8-108
.70
.22
.70
.50
Shaft
Size
F
Bolt Dia.
3/8
9/16
5/32
2-1/16
1-1/16
1/2
1/2
3/8
9/16
5/32
2-9/16
1-5/16
9/16
9/16
3/4
1
1-1/4
1-1/2
1-7/32
1-1/8
4-1/2
1-11/32
3-1/2
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-32
SELECTION
PAGE B17-6
Plummer Blocks
3/4 THRU 1-1/2 SOLIDLUBE LM800 4-BOLT FLANGE BEARING
B
D
Sleeve Bearings
SLEEVOIL
F
Shaft
Size
Part No.
Description
Wt.
3/4
1
1-1/4
1-1/2
033696
033697
033698
033699
F4B-LM8-012
F4B-LM8-100
F4B-LM8-104
F4B-LM8-108
.50
.36
.50
.50
Shaft
Size
F
Bolt Dia
3-1/8
2-1/4
3/8
1/16
3-5/8
2-3/4
3/8
1/16
Take-Up Frames
1-9/32
1-11/16
Engineering
3/4
1
1-1/4
1-1/2
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-33
SELECTION
PAGE B17-6
Keyword Index
Part Number Index
Plummer Blocks
SELECTION
Sleeve Bearings - Babbitted and Bronze-Bushed
General Information
Sleeve Bearings
SCOPE-for Stock Babbitted and Bronze Bushed Bearings,

Pillow Blocks and Take-Ups of the Rigid, Grease Lubricated
Type.
Selection - Select a bearing from rating tables having a radial

load equal to or greater than the Actual Radial Load, provided
that operating conditions numbered 1 thru 7 are met.
Important-Referring to Table1 on the opposite page: Table1 ratings

apply to the following DODGE Babbitted Sleeve Bearings:
If these conditions cannot be met, select a bearing for an

Equivalent Radial Load to be obtained by multiplying the Actual
Radial Load by a service factor depending on the specific
application. Use a factor of up to 2.0 for areas in the rating table
to the left of the zigzag line. Use a factor of up to 3.0 for areas to
the right of the zigzag line.
Solid Journals
Split Babbitted Journals
Rigid Babbitted Pillow Blocks
Angle Babbitted Pillow Blocks
Type H Take-Ups
Load ratings are based on industry standard ratings established

by the Mechanical Power Transmission Association. (Standard
No. 401)
Type A and B Take-Ups
Operating Conditions
Table2 ratings apply to DODGE Bronze Bushed Pillow Blocks:
1. Maintain adequate grease lubrication.
Split Bronze Bushed Journals
2. Maintain proper bearing alignment for uniform distribution of

load under all operating conditions.
Plate Type Flange Bearings

SLEEVOIL
Rigid Bronze Bushed Pillow Blocks
3. Normal running loads must not exceed ratings shown in the

load tables. Starting and occasional peak loads should not
exceed ratings by more than 100%.
Angle Bronze Bushed Pillow Blocks

Take-Up Frames
Note - Ratings do not apply to BRONZOIL, or SOLIDLUBE

pillow blocks.
Babbitted and bronze-bushed journal bearings DO NOT include
grease fittings.
Reference - Flush type reducer bushings to be used with Part
Number 405015 1/8 NPT grease fitting:
To order 1/8 NPT grease fitting, confirm pipe tap dimension
on bearing dimension page. If the pipe tap is 1/8, a flush type
reducer bushing is not required. If the pipe tap is 1/4, 3/8 or 1/2;
order the appropriate size flush type reducer bushing in addition
to p/n 405015.
Engineering
Part No.
430081
430086
430087
Description
1/2 x 1/8
3/8 x 1/8
1/4 x 1/8
4. Direction of load should not be closer than 30 to grease

groove or closer than 30 to the joint between cap and
base. If direction of load falls within this area which is not
recommended, decrease maximum load by 50%.
5. The shaft journal surface finish must be equal to that of
commercial steel shafting (about 32 micro inches) and the
diameter within the tolerances of commercial steel shafting
(+.000 / -.002)
6. Ambient temperature should not exceed 130F for babbitted
polymer limits and 300F for bronze-bushed bearings. If the
shaft transmits heat from a source such as an oven, the shaft
temperature at the bearing should not exceed these ambient
temperatures.
7. Bearings should be protected against adverse operating
conditions.
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-34
PAGE B17-10
900
80
110
125
150
105
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
1000
80
110
120
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
SLEEVOIL
800
85
115
130
180
185
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-35
PAGE B17-10
Keyword Index
Part Number Index
Table 1: MPTA Radial Load Ratings for Babbitted Sleeve Bearings

Radial Load Rating in Lbs. at Various Revolutions Per Minute
Shaft
Sizes
10
50
100
150
200
250
300
350
400
450
500
600
700
1/2
100
100
100
95
95
95
95
95
90
90
90
85
85
5/8
150
150
145
145
140
140
135
135
135
130
130
125
120
3/4
180
175
175
170
170
165
160
160
155
155
150
145
140
7/8
260
255
250
245
240
235
230
225
220
215
210
200
190
15/16
280
275
265
260
255
250
245
240
235
225
220
210
200
1
295
290
285
280
270
265
260
250
245
240
230
220
205
1-1/8
415
410
400
390
380
370
355
345
335
325
315
295
245
1-3/16, 1-1/4
440
430
420
410
395
385
375
360
350
340
325
305
190
1-5/16, 1-3/8
585
570
555
535
520
505
485
470
455
435
420
345
...
1-7/16, 1-1/2
640
625
605
585
565
545
525
500
480
460
440
205
...
1-11/16, 1-3/4
875
850
820
785
755
720
690
655
625
590
340
...
...
1-15/16, 2
1150
1110
1060
1010
965
915
865
815
730
335
...
...
...
2-3/16, 2-1/4
1460
1400
1330
1260
1190
1120
1050
975
410
...
...
...
...
2-7/16, 2-1/2
1800
1730
1630
1530
1430
1340
1240
645
...
...
...
...
...
2-11/16, 2-3/4
2190
2080
1950
1820
1690
1560
1150
110
...
...
...
...
...
2-15/16, 3
2600
2470
2300
2130
1960
1790
675
...
...
...
...
...
...
3-7/16, 3-1/2
3550
3330
3060
2790
2520
1200
...
...
...
...
...
...
...
3-15/16, 4
4640
4310
3910
3500
2760
...
...
...
...
...
...
...
...
4-7/16, 4-1/2
5870
5410
4830
4250
1410
...
...
...
...
...
...
...
...
4-15/16, 5
7240
6600
5810
5010
...
...
...
...
...
...
...
...
...
5-7/16, 5-12
8750
7900
6840
4360
5-15/16, 6
10410 9300
7910
2390
6-7/16, 6-1/2
12200 10790 9020
...
6-15/16, 7
14120 12360 10150
...
7-7/16, 7-1/2
17270 14950 12050
...
For speeds lower than 10 rpm consult DODGE.
7-15/16, 8
18390 15750 10710
...
9
20750 17360 4140
...
10
22950 18760
12
30700 23190
...
Take-Up Frames
Radial Load Ratings

(Refer To Instructions On Opposite Page)
Engineering
Sleeve Bearings
Plummer Blocks
SELECTION
Plummer Blocks
SELECTION
Radial Load Ratings
(Refer To Instructions On Page B17-34)
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Table 2: MPTA Radial Load Ratings for Bronze Bushed Sleeve Bearings
Shaft
Sizes
10
50
100
150
200
250
300
350
400
450
500
600
700
1/2
170
170
165
165
165
165
165
160
160
160
160
155
155
5/8
250
250
245
245
245
240
240
235
235
235
230
225
220
3/4
300
300
295
295
290
285
285
280
280
275
270
265
260
7/8
435
430
425
420
415
410
405
400
395
390
385
375
365
15/16
465
460
455
450
445
435
430
425
420
415
410
395
385
1
495
490
485
480
470
465
460
450
445
440
430
420
405
1-1/8
700
690
680
670
660
650
640
630
620
605
595
575
525
1-3/16, 1-1/4
735
730
715
705
695
680
670
660
645
635
625
600
485
1-5/16, 1-3/8
980
965
950
930
915
895
880
865
845
830
815
735
465
1-7/16, 1-1/2
1070
1050
1030
1010
995
975
955
935
915
895
875
635
315
1-11/16, 1-3/4
1470
1440
1410
1370
1340
1310
1280
1240
1210
1180
930
410
...
1-15/16, 2
1920
1880
1830
1790
1740
1690
1640
1590
1500
1110
715
...
...
2-3/16, 2-1/4
2440
2390
2320
2240
2170
2100
2030
1960
1390
830
265
...
...
2-7/16, 2-1/2
3020
2940
2850
2750
2650
2560
2460
1860
1090
...
...
...
...
2-11/16, 2-3/4
3660
3560
3430
3300
3170
3040
2620
1580
545
...
...
...
...
2-15/16, 3
4370
4230
4060
3890
3720
3550
2440
...
...
...
...
...
...
3-7/16, 3-1/2
5960
5740
5470
5200
4930
3610
1440
...
...
...
...
...
...
3-15/16, 4
7790
7460
7060
6650
5910
...
...
...
...
...
...
...
...
4-7/16, 4-1/2
9860
9400
8820
8240
5400
...
...
...
...
...
...
...
...
4-15/16, 5
12180 11540 10740 9950
4090
...
...
...
...
...
...
...
...
5-7/16, 5-1/2
14740 13880 12820 10340 1820
5-15/16, 6
17530 16420 15040 9520
...
6-7/16, 6-1/2
20560 19150 17390 7900
...
6-15/16, 7
23840 22070 19870 5350
...
7-7/16, 7-1/2
29170 26850 23950 1880
...
For speeds lower than 10 rpm consult DODGE.
7-15/16, 8
31090 28450 23410
...
...
35150 31760 18540
9
10
38950 34760 2220
12
52300 45520
...
800
150
220
255
355
375
360
360
300
195
...
...
...
...
...
...
...
...
...
...
...
900
150
215
250
325
295
255
195
115
...
...
...
...
...
...
...
...
...
...
...
...
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-36
PAGE B17-10
1000
145
210
240
245
200
150
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Plummer Blocks
SELECTION
Lower half of new bushing is installed by

relieving shaft pressure, prying out old
bushing and rolling in new one.
New bushing upper half is easily

dropped into bearing cap. Grease
grooves in the top of bore offer
adequate lubrication.
For Split Bronze Bushed Journal Bearings.
SLEEVOIL
Sleeve Bearings
Sleeve Bearings - Bronze Bushings
For Rigid Bronze Bushed Pillow Blocks.
Take-Up Frames
For Angle Bronze Bushed Pillow Blocks.
Bronze Bushing Sets
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6-1/2
7
7-1/2
8
Bushings made of special alloys can be furnished where

especially difficult heat problems may arise. They will be priced
on application.
Bushing Sets
Part
Wt.
No.
005055
1.70
005056
2.10
005057
2.50
005058
3.10
005059
3.60
005060
4.90
005061
9.70
005062
14
005063
15
005064
18
005065
21
005066
28
005067
33
005117
37
005068
42
Locking Spools*
Part
No.
005050
Engineering
Shaft
Size
005051
005052
005053
For other bushing material consult DODGE
Part Number Index
These precision bushings are machined from quality cast

cylinders of high grade leaded bronze. They are furnished in
matched halves and sold in complete sets only. Grease grooves
are provided in the top half for proper lubrication. Bushings are
designed to be installed in the bearings listed above without
removing the shaft or bearing base. A brass locking spool
positions the bushing preventing lateral movement or rotation.
This simple method minimizes down time and labor costs. They
are particularly suited for heavy loads, elevated temperatures
and corrosive conditions.
* Order separately if desired
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-37
PAGE B17-10
Keyword Index
Part number is for one bushing set which includes upper

and lower half
Plummer Blocks
Sleeve Bearings - Babbitted
1/2 THRU 3-7/16 SOLID BABBITTED JOURNAL BEARINGS
Sleeve Bearings
J
M
H
D (Min.-Max.)
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Shaft
Size
Part
No.
Description
Wt.
Frame
1/2
5/8
3/4
7/8
15/16
1
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3-3/16
3-7/16
006102
006104
006107
006109
006110
006111
006113
006114
006115
006117
006118
006119
006120
006124
006125
006128
006129
006132
006136
006140
006144
006148
006152
P2B-BASO-008
P2B-BASO-010
P2B-BASO-012
P2B-BASO-014
P2B-BASO-015
P2B-BASO-100
P2B-BASO-102
P2B-BASO-103
P2B-BASO-104
P2B-BASO-105
P2B-BASO-106
P2B-BASO-107
P2B-BASO-108
P2B-BASO-111
P2B-BASO-112
P2B-BASO-115
P2B-BASO-200
P2B-BASO-203
P2B-BASO-207
P2B-BASO-211
P2B-BASO-215
P2B-BASO-303
P2B-BASO-307
0.6
1.0
0.9
1.7
1.6
1.5
2.7
2.6
2.5
4.4
4.2
4.0
3.8
6.0
5.8
8.2
8.0
12
15
19
25
33
30
LD-10
1-1/4
LD-10
1-1/2
LD-10
Min.
2-1/32
Max.
2-7/32
3-1/2
1-1/8
2-13/32
2-19/32
1-7/8
1-1/2
2-7/8
3-1/8
LD-10
2-3/8
4-3/4
1-3/4
3-3/8
3-5/8
...
2-7/8
5-1/2
3-7/8
4-1/8
LD-20
3-3/8
6-1/4
2-1/4
4-11/32
4-21/32
...
3-7/8
2-1/2
5-1/8
5-3/8
...
...
...
LD-45
4-3/8
4-7/8
5-3/8
5-7/8
7-3/4
8-1/2
9-1/4
10
2-3/4
3
3-1/4
3-1/2
5-1/2
6
6-1/2
7-9/32
6
6-1/2
7
7-23/32
...
6-7/8
10-3/4
7-5/8
8-3/8
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-38
SELECTION
PAGE B17-6
Plummer Blocks
1/2
5/16
1/2
3/8
1-15/32
5/8
5/16
1/2
1/2
1-23/32
3/4
7/8
15/16
3/8
9/16
5/8
2
1
1-1/8
1-3/16
7/16
21/32
11/16
2-7/16
1-1/4
1-5/16
1-3/8
1/2
11/16
7/8
2-3/4
1-7/16
1-1/2
1-11/16
9/16
13/16
1
3-1/16
1-3/4
1-15/16
5/8
13/16
1-1/8
3-1/2
2
2-3/16
11/16
1-1/32
1-1/4
3-13/16
2-7/16
3/4
1-1/8
1-3/8
4-1/4
2-11/16
13/16
1-5/32
1-1/2
4-9/16
2-15/16
7/8
1-5/32
1-11/16
5
3-3/16
1
1-7/16
1-7/8
5-7/16
3-7/16
# Grease cups or pressure fittings may be obtained thru our distributors; one required per bearing.
See page B17-34 for grease fitting and reducer bushing part numbers
Note: All blocks have two base bolts and are one piece solid housings.
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
3/4
Pipe Tap
1/8
Grease Cups #
No. Reqd
1
Size
0
7/8
1/8
1/8
1-1/4
1/8
1-3/8
1/4
1-1/2
1/4
1-3/4
1/4
1-7/8
2-1/8
2-1/4
2-1/2
3/8
3/8
3/8
3/8
1
1
1
1
2
2
2
2
2-3/4
3/8
NOMENCLATURE
PAGE B17-5
B17-39
SELECTION
PAGE B17-6
Engineering
Part Number Index
F
Bolt
Keyword Index
Shaft
Size
Take-Up Frames
SLEEVOIL
Sleeve Bearings
1/2 THRU 3-7/16 SOLID BABBITTED JOURNAL BEARINGS
Plummer Blocks
1/2 THRU 3-15/16 SPLIT BABBITTED JOURNAL BEARINGS
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Shaft
Size
Part
No.
Description
Wt.
1/2
5/8
3/4
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-15/16
3
3-7/16
3-15/16
006001
006004
006007
006010
006013
006016
006019
006022
006025
006028
006031
006034
006037
006040
006043
006046
006049
006052
006055
006058
006061
006064
006067
006070
006073
006076
006079
006082
P2B-BASP-008
P2B-BASP-010
P2B-BASP-012
P2B-BASP-014
P2B-BASP-015
P2B-BASP-100
P2B-BASP-101
P2B-BASP-102
P2B-BASP-103
P2B-BASP-104
P2B-BASP-105
P2B-BASP-106
P2B-BASP-107
P2B-BASP-108
P2B-BASP-110
P2B-BASP-111
P2B-BASP-112
P2B-BASP-115
P2B-BASP-200
P2B-BASP-203
P2B-BASP-204
P2B-BASP-207
P2B-BASP-208
P2B-BASP-211
P2B-BASP-215
P2B-BASP-300
P2B-BASP-307
P2B-BASP-315
0.8
1.1
1.0
1.9
1.8
1.7
3.3
3.2
3.1
3.0
5.0
4.8
1.6
4.4
6.6
6.4
6.2
8.6
8.3
12.2
11.9
15.6
15.1
20.0
24.2
23.7
40
53
1-1/4
3-3/4
1-1/2
Min.
2-3/4
Max.
3
4-1/4
1-1/8
3-1/8
3-3/8
4-3/4
1-1/2
3-1/2
3-3/4
2-1/2
5-1/4
1-3/4
4-1/4
6-1/4
4-13/16
4-15/16
3-3/8
6-3/4
2-1/4
5-1/8
5-3/8
7-1/2
2-1/2
5-15/16
6-1/16
4-1/2
8-1/2
2-3/4
6-1/4
6-3/4
9-1/4
6-7/8
7-3/8
5-3/8
10
3-5/16
7-1/2
10-3/4
3-1/2
8-1/4
8-3/4
6-7/8
7-7/8
12
13-1/2
4
4-1/2
8-7/8
10-3/32
9-5/8
10-29/32
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-40
SELECTION
PAGE B17-6
Plummer Blocks
1/2
5/16
1/2
23/64
1-15/32
5/8
5/16
1/2
1/2
1-23/32
3/4
7/8
15/16
3/8
9/16
9/16
2
1
1-1/16
1-1/8
7/16
5/8
5/8
2-7/16
1-3/16
1-1/4
1-5/16
1-3/8
9/16
11/16
3/4
2-3/4
1-7/16
1-1/2
1-5/8
1-11/16
9/16
25/32
13/16
3-1/16
1-3/4
1-15/16
11/16
13/16
15/16
3-1/2
2
2-3/16
11/16
1
1
3-13/16
2-1/4
2-7/16
11/16
1
1-1/8
4-1/4
2-1/2
2-11/16
13/16
1-1/8
1-3/16
4-9/16
2-15/16
13/16
1-1/8
1-5/16
5
3
3-7/16
15/16
1-3/8
1-1/2
5-3/4
3-15/16
1
1-1/2
1-5/8
6-7/16
See page B17-34 for grease fitting and reducer bushing part numbers
Note: All blocks have 2 base bolts and 2 cap bolts. Housings are split.
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
3/4
Pipe Tap
1/8
Grease Cups #
No. Reqd
1
Size
0
7/8
1/8
1/8
1-1/4
1/8
1-3/8
1/4
1-1/2
1/4
1-3/4
1/4
1-7/8
3/8
2-1/8
3/8
2-1/4
3/8
2-1/2
3/8
2-7/8
3-1/8
1/2
1/2
1
1
3
3
NOMENCLATURE
PAGE B17-5
B17-41
SELECTION
PAGE B17-6
Take-Up Frames
Engineering
Part Number Index
F
Bolt
Keyword Index
Shaft
Size
SLEEVOIL
Sleeve Bearings
1/2 THRU 3-15/16 SPLIT BABBITTED JOURNAL BEARINGS
Plummer Blocks
1-15/16 THRU 8 RIGID BABBITTED JOURNAL BEARINGS (SPLIT HOUSING)
G
Sleeve Bearings
J
H
D (Min.-Max.)
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Shaft
Size
Part
No.
Description
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6-1/2
7
7-1/2
8
004060
004063
004066
004069
004072
004075
004078
004081
004084
004087
004090
004093
004096
004099
004102
004105
004108
004113
004114
004115
004116
P4B-BAR-115
P4B-BAR-200
P4B-BAR-203
P4B-BAR-204
P4B-BAR-207
P4B-BAR-208
P4B-BAR-211
P4B-BAR-215
P4B-BAR-300
P4B-BAR-303
P4B-BAR-307
P4B-BAR-308
P4B-BAR-315
P4B-BAR-407
P4B-BAR-415
P4B-BAR-507
P4B-BAR-515
P4B-BAR-608
P4B-BAR-700
P4B-BAR-708
P4B-BAR-800
Wt.
10.6
8-1/4
13.2
4-1/2
18.4
D
Min.
Max.
3-1/2
6-3/8
6-5/8
8-1/2
3-1/2
6-5/8
6-7/8
10-1/4
7-3/4
8-1/4
22.4
5-1/2
10-1/2
4-1/4
8-1/2
30.6
11
4-1/2
8-1/2
50.2
13
10-1/8
10-7/8
64
88
113
147
184
255
310
370
430
8
9
10
11
12
13
14
15
16
14-3/4
16-1/2
18
19-1/4
20-1/2
22
23
24-1/2
26
5-1/2
6-1/4
7
7-3/4
8-1/2
9-1/2
10
10-1/2
11
11-1/2
13
14-3/8
15-1/8
15-7/8
17-3/8
18-3/8
19-3/8
20-3/4
12-1/2
14
15-5/8
16-3/8
17-1/8
18-5/8
19-5/8
20-5/8
22-1/4
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-42
SELECTION
PAGE B17-6
Plummer Blocks
Pipe Tap
1-15/16
1-3/4
1/2
3/4
7/8
3-1/2
1-3/4
1/4
2
2-3/16
1-3/4
1/2
3/4
1
3-13/16
1-7/8
3/8
2-1/4
2-7/16
2
5/8
1
1-1/8
4-1/4
2-1/8
3/8
2-1/2
2-11/16
2-1/4
5/8
1
1-1/4
4-9/16
2-1/4
3/8
2-15/16
2-1/2
5/8
1
1-3/8
5
2-1/2
3/8
3
3-3/16
3-7/16
2-3/4
3/4
1-1/4
1-1/2
5-29/32
3-1/4
1/2
3-1/2
3-15/16
3
3/4
1-3/8
1-5/8
6-17/32
3-1/2
1/2
4-7/16
3-1/2
7/8
1-1/2
1-3/4
7-17/32
4-1/8
1/2
4-15/16
4
7/8
1-5/8
1-7/8
8-7/32
4-1/2
1/2
5-7/16
4-1/2
1
1-3/4
2
9-1/32
5
1/2
5-15/16
5
1-1/8
1-7/8
2-1/8
9-7/8
5-1/2
1/2
6-1/2
5-1/2
1-1/8
1-7/8
2-1/4
10-23/32
6
1/2
7
6
1-1/4
2
2-3/8
11-1/2
6-1/2
1/2
7-1/2
6-1/4
1-3/8
2-1/8
2-1/2
12-5/32
6-3/4
1/2
8
6-3/4
1-3/8
2-1/4
2-1/2
12-3/4
7
1/2
# Grease cups or pressure fittings may be obtained thru our distributors; one required per bearing up thru 4-15/16 sizes and two required for
balance of sizes.
See page B17-34 for grease fitting and reducer bushing part number.
Note: 1-15/16 - 3 sizes have 2 cap bolts. 3-3/16 and larger sizes have 4 cap bolts (shown in diagram). Housings are split.
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-43
Grease Cups #
No. Reqd
Size
1
1
1
2
2
2
2
2
2
4
4
4
3
3
4
4
4
4
SELECTION
PAGE B17-6
Take-Up Frames
Engineering
F
Bolt
Part Number Index
Keyword Index
Shaft
Size
SLEEVOIL
Sleeve Bearings
1-15/16 THRU 8 RIGID BABBITTED JOURNAL BEARINGS (SPLIT HOUSING)
Plummer Blocks
1-15/16 THRU 8 ANGLE BABBITTED PILLOW BLOCKS
G
Sleeve Bearings
J
M
H
E
F
SLEEVOIL
D (Min.-Max.)
C
A
Take-Up Frames
Engineering
Shaft
Size
Part
No.
Description
Wt.
Used
on Frame
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6-1/2
7
8
230050
230053
230056
230059
230062
230065
230068
230071
230074
230077
230080
230134
230137
230140
P4B-BAA-115
P4B-BAA-203
P4B-BAA-207
P4B-BAA-211
P4B-BAA-215
P4B-BAA-307
P4B-BAA-315
P4B-BAA-407
P4B-BAA-415
P4B-BAA-507
P4B-BAA-515
P4B-BAA-608
P4B-BAA-700
P4B-BAA-800
11
14
20
24
28
47
61
84
112
154
184
220
275
400
HD-200
HD-200
HD-200
HB-250
HD-250
HD-300
HD-350
HD-400
HD-400
HD-500
HD-500
...
...
...
4
4-1/2
5
5-1/2
6
7
8
9
10
11
12
13
14
16
8-1/4
8-1/2
10-1/4
10-1/2
11
13
14-3/4
16-9/16
18
19-3/4
20-1/2
22
23
26
3-1/2
3-1/2
4
4-1/4
4-1/2
5
5-1/2
6-5/16
7
8
8-1/2
9-5/8
10
11
D
Min.
6-5/16
6-9/16
7-11/16
7-15/16
8-7/16
10-1/16
11-7/16
12-15/16
14-5/16
15-1/16
15-13/16
17-3/16
18-1/4
20-11/16
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-44
SELECTION
PAGE B17-6
Max.
6-11/16
6-15/16
8-5/16
8-9/16
9-1/16
10-15/16
12-9/16
14-1/16
15-11/16
16-7/16
17-3/16
18-13/16
19-3/4
22-5/16
Plummer Blocks
Pipe Tap
1-15/16
1-3/4
1/2
3/4
7/8
4-11/16
2-1/4
1/4
2-3/16
1-3/4
1/2
3/4
1
5-1/8
2-1/2
3/8
2-7/16
2
5/8
1
1-1/8
5-9/16
2-3/4
3/8
2-11/16
2-1/4
5/8
1
1-1/4
5-7/8
3
3/8
2-15/16
2-1/2
5/8
1
1-3/8
6-3/8
3-1/4
3/8
3-7/16
2-3/4
3/4
1-1/4
1-1/2
7-1/8
3-1/2
1/2
3-15/16
3
3/4
1-3/8
1-21/32
7-1/2
3-3/4
1/2
4-7/16
3-1/2
7/8
1-1/2
1-3/4
8-1/2
4-1/8
1/2
4-15/16
4
7/8
1-5/8
1-7/8
9-3/16
4-1/2
1/2
5-7/16
4-1/2
1-1/8
1-7/8
2
10-1/4
5
1/2
5-15/16
5
1-1/8
1-7/8
2-1/8
11-1/16
5-1/2
1/2
6-1/2
5-1/2
1-1/8
2
2-1/4
12-1/8
6
1/2
7
6
1-1/8
2
2-3/8
13
6-1/2
1/2
8
6-3/4
1-3/8
2-1/4
2-1/2
14-1/16
7
1/2
# Grease cups or pressure fittings may be obtained thru our distributors; one required per bearing up thru 4-15/16, sizes and two required for
balance of sizes.
Note: 1-15/16 - 3-7/16 sizes have 2 cap bolts.
3-7/16 - 5-15/16 have 3 cap bolts (shown in diagram).
6-1/2 and larger sizes have 4 cap bolts.
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-45
Grease Cups #
No. Reqd
1
1
1
1
1
1
1
1
1
2
2
2
2
2
Size
1
2
2
2
2
3
4
4
4
3
3
4
4
4
Engineering
F
Bolt
Part Number Index
SELECTION
PAGE B17-6
Keyword Index
Shaft
Size
Take-Up Frames
SLEEVOIL
Sleeve Bearings
1-15/16 THRU 8 ANGLE BABBITTED PILLOW BLOCKS
Plummer Blocks
TYPE H BABBITTED TAKE-UP BEARINGS
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Shaft
Size
Part
No.
Description
Frame
Size
1-15/16
2-3/16
2-7/16
2-15/16
3-7/16
3-15/16
012215
012216
012217
012218
012219
012220
TP-H-115
TP-H-203
TP-H-207
TP-H-215
TP-H-307
TP-H-315
TP10
TP10
TP30
TP30
TP50
TP50
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-46
SELECTION
PAGE B17-6
Plummer Blocks
4
4-1/2
5
6
7
8
6
6
7
7
9
9
2-3/8
2-3/8
2-1/2
2-1/2
3-1/8
3-1/8
5-1/2
5-1/2
6-1/2
6-1/2
8-1/2
8-1/2
3
3
3-3/8
3-3/8
4-1/2
4-1/2
6-1/8
6-1/8
7-5/16
7-5/16
9-5/8
9-5/8
2-7/16
2-3/4
3-1/16
3-9/16
4-3/16
4-11/16
2-3/8
2-3/8
2-3/4
2-3/4
3-1/8
3-1/8
Pipe
Tap
1/4
3/8
3/8
3/8
3/8
3/8
Cup
Size
0
2
2
2
2
2
Engineering
Frame
Size
TP10
TP10
TP30
TP30
TP50
TP50
Part Number Index
Weight
lbs.
12.5
12.6
22.4
23.6
46.0
47.2
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-47
SELECTION
PAGE B17-6
Keyword Index
Shaft
Size
1-15/16
2-3/16
2-7/16
2-15/16
3-7/16
3-15/16
Take-Up Frames
SLEEVOIL
Sleeve Bearings
TYPE H BABBITTED TAKE-UP BEARINGS
Plummer Blocks
1-15/16" THRU 4-15/16" PLATE TYPE BABBITTED FLANGE BEARING
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Shaft
Engineering
Part Number Index
15/16
1
1-3/16
1-1/4
1-7/16
1-1/2
1-11/16
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
Part No.
Description
037001
037010
037002
037011
037003
037012
037004
037005
037013
037006
037007
037017
037009
037020
037022
037024
037026
F4B-BAP-015
F4B-BAP-100
F4B-BAP-103
F4B-BAP-104
F4B-BAP-107
F4B-BAP-108
F4B-BAP-111
F4B-BAP-115
F4B-BAP-200
F4B-BAP-203
F4B-BAP-207
F4B-BAP-211
F4B-BAP-215
F4B-BAP-307
F4B-BAP-315
F4B-BAP-407
F4B-BAP-415
Wt.
B
Dia.
C
Dia.
D
Dia.
3.6
2-1/2
4-1/2
2-1/2
3-1/2
5.3
5-1/4
2-3/4
8.6
3-1/2
3-1/4
4-3/4
12
6-1/2
3-3/4
5-1/4
17
22
32
35
53
70
103
140
4-1/2
5
5-1/2
6
7
8
9
10
7-1/2
8
9
9-1/2
10-3/8
11-1/8
12-5/8
14
4
4-1/2
5
5-1/4
6-1/4
6-7/8
7-3/4
8-1/2
5-3/4
6-1/4
7
7-1/2
8-1/2
9-1/4
10-1/2
11-1/2
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-48
SELECTION
PAGE B17-6
Plummer Blocks
3/8
3/8
3/8
Grease Cups #
Pipe Tap
Size
3/4
1/8
7/16
1/8
1/2
1/2
1-1/4
1/4
1/2
5/8
1-1/2
1/4
1/2
11/16
1-5/8
1/4
4
4
4
4
6
6
6
6
5/8
5/8
3/4
3/4
3/4
3/4
7/8
1
3/4
7/8
1
1
1
1-1/8
1-1/4
1-3/8
1-7/8
2-1/8
1-3/4
2-1/4
2-3/4
3-1/4
3-3/4
4-1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
2
2
2
2
3
4
4
4
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-49
SELECTION
PAGE B17-6
Engineering
Size
Part Number Index
15/16
1
1-3/16
1-1/4
1-7/16
1-1/2
1-11/16
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
F Bolt
No.
Keyword Index
Shaft
Take-Up Frames
SLEEVOIL
Sleeve Bearings
1-15/16" THRU 4-15/16" PLATE TYPE BABBITTED FLANGE BEARING
Plummer Blocks
Sleeve Bearings - Bronze-Bushed
1-15/16 THRU 2-15/16 BRONZE-BUSHED SPLIT JOURNAL BEARING
Sleeve Bearings
J
M
H
SLEEVOIL
D (Min-Max.)
Take-Up Frames
Engineering
Shaft
Size
Part No.
Description
Wt.
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
005070
005073
005076
005079
005082
P2B-BZSP-115
P2B-BZSP-203
P2B-BZSP-207
P2B-BZSP-211
P2B-BZSP-215
9
12
15
20
24
3-7/8
4-3/8
4-7/8
5-3/8
6
7-1/2
8-1/2
9-1/4
10
10-3/4
2-1/2
2-3/4
3
3-1/4
3-1/2
Shaft
Size
F
Bolt
Part Number Index
1-15/16
5/8
13/16
15/16
3-1/2
2-3/16
5/8
1
1
3-7/8
2-7/16
5/8
1
1-1/8
4-1/4
2-11/16
3/4
1-1/8
1-3/16
4-9/16
2-15/16
3/4
1-1/8
1-5/16
5
Note: All sizes have 2 bolt base and 2 cap bolts. Housings are split.
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
M
1-3/4
1-7/8
2-1/8
2-1/4
2-1/2
NOMENCLATURE
PAGE B17-5
B17-50
Pipe Tap
1/4
3/8
3/8
3/8
3/8
D
Min.
5-15/16
6-1/4
6-7/8
7-1/2
8-1/4
Grease Cups #
No. Reqd
1
1
1
1
1
SELECTION
PAGE B17-6
Max.
6-1/16
6-3/4
7-3/8
8
8-3/4
Size
0
2
2
2
2
Plummer Blocks
3-7/16 THRU 8 BRONZE-BUSHED RIGID SPLIT JOURNAL BEARING
Sleeve Bearings
J
M
D (Min.-Max.)
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6-1/2
7
7-1/2
8
005085
005088
005091
005094
005097
005100
005195
005198
005199
005201
P4B-BZR-307
P4B-BZR-315
P4B-BZR-407
P4B-BZR-415
P4B-BZR-507
P4B-BZR-515
P4B-BZR-608
P4B-BZR-700
P4B-BZR-708
P4B-BZR-800
47
64
89
115
137
180
255
310
370
430
7
8
9
10
11
12
13
14
15
16
13
14-3/4
16-1/2
18
19-1/4
20-1/2
22
23
24-1/2
26
5
5-1/2
6-1/4
7
7-3/4
8-1/2
9-1/2
10
10-1/2
11
F
Bolt
Pipe Tap
3-7/16
2-3/4
3/4
1-1/4
1-1/2
6-1/32
3-1/4
1/2
3-15/16
3
3/4
1-3/8
1-5/8
6-1/2
3-1/2
1/2
4-7/16
3-1/2
7/8
1-1/2
1-3/4
7-15/32
4-1/8
1/2
4-15/16
4
7/8
1-5/8
1-7/8
8-1/32
4-1/2
1/2
5-7/16
4-1/2
1
1-3/4
2
8-15/16
5
1/2
5-15/16
5
1-1/8
1-7/8
2-1/8
9-13/16
5-1/2
1/2
6-1/2
5-1/2
1-1/8
1-7/8
2-1/4
10-11/16
6
1/2
7
6
1-1/4
2
2-3/8
11-7/16
6-1/2
1/2
7-1/2
6-1/4
1-3/8
2-1/8
2-1/2
12-1/8
6-3/4
1/2
8
6-3/4
1-3/8
2-1/4
2-1/2
12-11/16
7
1/2
# Grease cups or pressure fittings may be obtained thru our distributors; one required per pillow block u thru 4-15/16 sizes and two required for
balance of sizes.
Note: All sizes have 4 base bolts. - 3-7/16 and larger sizes have 4 cap bolts. Housings are split.
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-51
D
Min.
10-1/8
11-1/2
13
14-3/8
15-1/8
15-7/8
17-3/8
18-3/8
19-3/8
20-3/4
Max.
10-7/8
12-1/2
14
15-5/8
16-3/8
17-1/8
18-5/8
19-5/8
20-5/8
22-1/4
Grease Cups #
No. Reqd
1
1
1
1
2
2
2
2
2
2
SELECTION
PAGE B17-6
Size
3
4
4
4
3
3
4
4
4
4
Take-Up Frames
Engineering
Wt.
Part Number Index
Description
Keyword Index
Part
No.
C
A
Shaft
Size
Shaft
Size
SLEEVOIL
Plummer Blocks
1-15/16 THRU 8 ANGLE BRONZE-BUSHED PILLOW BLOCKS
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Shaft
Engineering
Part Number Index
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6-1/2
7
8
Part No.
Description
Wt.
Used on
Frame
231063
231069
231075
231081
231087
231096
231102
231108
231114
231120
231126
231135
231141
231150
P4B-BZA-115
P4B-BZA-203
P4B-BZA-207
P4B-BZA-211
P4B-BZA-215
P4B-BZA-307
P4B-BZA-315
P4B-BZA-407
P4B-BZA-415
P4B-BZA-507
P4B-BZA-515
P4B-BZA-608
P4B-BZA-700
P4B-BZA-800
10
14
20
22
28
46
62
85
109
142
180
220
275
400
HD-200
HD-200
HD-200
HD-250
HD-250
HD-300
HD-350
HD-400
HD-400
HD-500
HD-500
...
...
...
4
4-1/2
5
5-1/2
6
7
8
9
10
11
12
13
14
16
8-1/4
8-1/2
10-1/4
10-1/2
11
13
14-3/4
16-9/16
18
19-3/4
20-1/2
22
23
26
3-1/2
3-1/2
4
4-1/4
4-1/2
5
5-1/2
6-5/16
7
8
8-1/2
9-5/8
10
11
D
Min.
6-5/16
6-9/16
7-11/16
7-15/16
8-7/16
10-1/16
11-7/16
12-15/16
14-5/16
15-1/16
15-13/16
17-3/16
18-1/4
20-11/16
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-52
SELECTION
PAGE B17-6
Max.
6-11/16
6-15/16
8-5/16
8-9/16
9-1/16
10-15/16
12-9/16
14-1/16
15-11/16
16-7/16
17-3/16
18-13/16
19-3/4
22-5/16
Plummer Blocks
1-3/4
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
4-1/2
5
5-1/2
6
6-3/4
1/2
1/2
5/8
5/8
5/8
3/4
3/4
7/8
7/8
1
1-1/8
1-1/8
1-1/4
1-3/8
3/4
3/4
1
1
1
1-1/4
1-3/8
1-1/2
1-5/8
1-7/8
1-7/8
2
2
2-1/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-3/16
2-1/4
2-3/8
2-1/2
4-11/16
5-1/8
5-9/16
5-7/8
6-3/8
7-1/8
7-1/2
8-1/2
9-3/16
10-1/4
11-1/16
12-1/8
13
14-1/16
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4-1/8
4-1/2
5
5-1/2
6
6-1/2
7
Cap
Bolts
Quantity
2
2
2
2
2
2
3
3
3
3
3
4
4
4
Grease Cups #
Pipe Tap
Qty.
Size
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1
1
1
1
1
1
1
1
1
2
2
2
2
2
1
2
2
2
2
3
4
4
4
3
3
4
4
4
# Grease cups or pressure fittings may be obtained thru our distributors; one required per pillows block up thru 4-15/16 sizes and two required
for balance of sizes.
Note: 1-15/16 - 3-7/16 sizes have 2 cap bolts

3-15/16 - 5-15/16 sizes have 3 cap bolt (shown in diagram)

6-1/2 and larger have 4 cap bolts
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-53
SELECTION
PAGE B17-6
Engineering
F
Bolt
Part Number Index
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6-1/2
7
8
Keyword Index
Shaft
Take-Up Frames
SLEEVOIL
Sleeve Bearings
1-15/16 THRU 8 ANGLE BRONZE-BUSHED PILLOW BLOCKS
Plummer Blocks
SELECTION
Sleeve Bearings - BRONZOIL
RADIAL LOAD RATINGS FOR BRONZOIL SLEEVE BEARINGS

Shaft
Sizes
Sleeve Bearings
50
230
250
260
280
380
420
500
525
1/2
5/8
3/4
7/8
15/16
1
1-3/16
1-1/4
Shaft
Sizes
100
225
240
250
270
360
400
475
500

200
500
220
175
230
180
240
185
260
190
290
200
300
210
395
250
415
260
SLEEVOIL
Take-Up Frames
BRONZOIL Take-Up Bearing Assembly

Size
1/2
5/8
3/4
7/8
15/16
1
(TUBO--)
Assy.No.
034030
034031
034032
034033
034034
034035
1500
110
105
100
95
90
85
115
120

2500
3000
3500
80
60
50
65
55
45
55
50
35
50
45
...
45
40
...
40
...
...
...
...
...
...
...
...
2000
90
80
70
60
55
50
60
63
1/2
5/8
3/4
7/8
15/16
1
1-3/16
1-1/4
1000
120
125
130
145
150
160
135
140
034001
034001
034001
034002
034002
034002
405046
405046
405046
405046
405046
405046
034013
034014
034015
034016
034017
034018
444010
444010
444010
444010
444010
444010
4000
45
35
...
...
...
...
...
...
Select a bearing from the rating tables having a radial load equal
to or greater than the actual load providing normal operating
conditions are met. If these conditions cannot be met, select
a bearing for an equivalent radial load to be obtained by
multiplying the actual radial load by a 2.0 to 4.0 service factor depending on specific application.
Normal Operating Conditions:
Engineering
1. Adequate oil supply.

2. Proper bearing alignment for uniform distribution of load at all
operating conditions.
3. No shock loading.
4. No adversely high operating conditions.
5. No moist, corrosive, or abrasive atmosphere.
Part Number Index
6. Shaft surface finish must be equal to that of commercial steel

shafting. (About 32 micro inches)
7. Shaft diameter tolerance within +.000/ -.002.
8. Maximum operating temperature 180F.
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-54
PAGE B17-10
Plummer Blocks
1/2 THRU 1-1/4 BRONZOIL PILLOW BLOCKS

A
BEARING SURFACE
FOR COLLAR
R
Sleeve Bearings
G
J
SLEEVOIL
B
RUBBER GROMMET
035025
035026
035027
035028
035029
035030
035107
035108
P2B-BO-008
P2B-BO-010
P2B-BO-012
P2B-BO-014
P2B-BO-015
P2B-BO-100
P2B-BO-103
P2B-BO-104
Wt.
0.6
1-1/8
1-3/16
0.5
1-1/8
1-3/16
1.3
1.2
1-3/4
1-3/4
4-1/2
4-1/2
1-1/4
1-1/4
3-1/2
3-1/2
Take-Up Frames
Description
F
Bolt
3/8
9/16
5/32
2- 5/16
1-1/16
1/2
5/8
3/8
9/16
5/32
2-5/16
1-1/16
1/2
5/8
3/8
3/8
9/16
9/16
5/32
5/32
2-13/16
2-13/16
1-5/16
1-5/16
7/8
27/32
7/8
29/32
Grommets are optional and furnished on order only. Order (2) grommet long nipples (part number 035082) for each pillow block
When grommets are used, the J and M dimensions increase by 1/16 and the H dimension by 1/8. A 5/16 bolt and a washer must be used with each grommet. Washer part number
035084.
Engineering
Shaft
Size
1/2
5/8
3/4
7/8
15/16
1
1-3/16
1-1/4
Part No.
Part Number Index
Shaft
Size
1/2
5/8
3/4
7/8
15/16
1
1-3/16
1-1/4
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-55
SELECTION
PAGE B17-6
Keyword Index
Plummer Blocks
1/2 THRU 1-1/4 BRONZOIL 4-BOLT FLANGE BEARING

B
B
H
Sleeve Bearings
D B
SLEEVOIL
RUBBER GROMMET
FLAT WASHER
(OPTIONAL)
STYLE A
RUBBER GROMMET
FLAT WASHER
(OPTIONAL)
STYLE B
Take-Up Frames
Shaft
Size
Part No.
Description
1/2
5/8
3/4
7/8
15/16
1
1-3/16
1-1/4
035031
035032
035033
035034
035035
035036
035116
035117
F4B-BO-008
F4B-BO-010
F4B-BO-012
F4B-BO-014
F4B-BO-013
F4B-BO-100
F4B-BO-103
F4B-BO-104
Engineering
Shaft
Size
Part Number Index
1/2
5/8
3/4
7/8
15/16
1
1-3/16
1-1/4
Wt.
0.60
1-1/4
0.50
1-1/4
1.30
1.20
1-7/8
1-29/32
3-5/8
3-5/8
F
Bolt
STYLE
3-1/8
3/8
5/32
3-1/8
3/8
5/32
2-3/4
2-3/4
3/8
3/8
1/16
1/16
A
A
Grommets are optional and furnished on order only. Order (4) grommet short nipples (part number 035083) for each flange bearing.
When grommets are used, the A dimension increases by 1/16 and the H dimension by 1/8. A 5/16 bolt and a washer must be used with each grommet. Washer part number 035084.
Keyword Index
FEATURES/BENEFITS
PAGE B17-2
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-56
SELECTION
PAGE B17-6
Plummer Blocks
Sleeve Bearings
Shaft Collars
FEATURES/BENEFITS
PAGE B17-2
0.01
0.01
0.01
0.01
0.01
0.05
0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.2
0.2
0.2
0.2
0.4
0.4
0.4
0.4
0.5
0.5
0.7
0.6
0.6
0.8
0.8
1.0
1.0
1.2
1.2
1.4
1.3
2.2
Shaft
Size
Part
Number
1-15/16
2
2-3/16
2-7/16
2-1/2
2-11/16
2-15/16
3-3/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6
6-1/2
7
7-1/2
8
010020
010021
010024
010028
010029
010032
010036
010039
010043
010048
010051
010054
010055
010056
010057
010058
010059
010060
010061
Wt.
2.5
2.5
3.0
4.3
4.3
5.0
5.6
7.0
7.6
10.0
12.0
16.3
18.5
23.0
23.0
25.0
32.0
35.0
45.0
NOTE: Solid and Split iron collars have one set

screw thru 3-1/4 bore size. 3-3/16 and larger
bores have two setscrews.
PAGE B17-4
NOMENCLATURE
PAGE B17-5
B17-57
Shaft
Size
Part
Number
1-1/8
1-3/16
1-1/4
1-5/16
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-15/16
3
3-3/16
3-7/16
3-11/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6
6-1/2
7
7-1/2
8
010075
010076
010077
010078
010080
010081
010084
010085
010088
010089
010092
010093
010096
010097
010100
010104
010105
010107
010110
010112
010114
010117
010120
010123
010126
010127
010128
010129
010130
010131
SELECTION
PAGE B17-6
Wt.
1.3
1.3
1.3
1.8
1.8
1.8
2.4
2.4
2.6
2.6
3.4
3.4
3.8
4.3
5.4
4.6
4.4
8.0
6.0
10.6
9.0
17.0
20.8
23.0
23.7
35.0
41.0
46.0
56.0
71.0
SLEEVOIL
Wt.
Take-Up Frames
Stainless
Split Iron
Dimensions
O.D.
Width
(A)
(B)
3.13
1.25
3.13
1.25
3.13
1.25
3.38
1.44
3.38
1.44
3.38
1.44
3.75
1.56
3.75
1.56
4.06
1.75
4.06
1.75
4.50
1.88
4.50
1.88
4.44
1.88
4.88
2.00
5.31
2.06
5.50
1.88
5.50
1.88
6.06
2.38
6.06
2.38
6.81
2.63
7.00
2.75
8.13
3.31
8.50
3.25
9.00
3.25
9.50
3.25
10.13
4.06
11.00
4.25
12.00
4.50
12.94
4.69
13.50
4.88
Engineering
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-15/16
NOTE:
O.D.
(A)
----456225
0.36
040001 456226
0.44
040002 456227
0.50
040003 456228
0.63
040004 456229
0.75
040005
----0.88
040006 456230
1.00
040007
----1.00
040008 456231
1.13
040009
----1.25
040010 456232
1.25
040011
----1.31
040012 456234
1.50
040013
----1.63
040014 456234
1.63
040015
----1.75
040016 456235
1.75
040017
----2.00
040018 456236
2.00
040019
----2.13
040020
----2.13
040021
----2.25
040022 456237
2.25
040023
----2.50
040024
----2.50
040025
----2.50
040026 456238
2.75
040027
----2.75
040028
----3.00
040029 456239
3.00
040030
----3.25
040031
----3.25
040032
----3.50
040033
----3.50
040034
----4.25
Steel is mild carbon steel.
Stainless is 300-series stainless.
All sizes are fitted with one setscrew.
Steel
Solid Iron
Dimensions
O.D.
Width
(A)
(B)
3.38
1.38
3.38
1.38
3.75
1.38
4.25
1.50
4.25
1.50
4.75
1.50
5.00
1.63
5.50
1.63
5.75
1.75
6.50
1.88
7.25
2.00
8.00
2.13
8.75
2.13
9.25
2.25
9.25
2.25
10.00
2.25
10.50
3.38
11.38
2.50
12.13
2.88
Part Number Index
Shaft
Size
Dimensions
Width
Screw
(B)
0.25
#6
0.25
#8
0.28
#10
0.34
#10
0.38
1/4
0.44
1/4
0.44
1/4
0.44
1/4
0.50
5/16
0.56
5/16
0.56
5/16
0.56
5/16
0.56
5/16
0.56
5/16
0.63
5/16
0.63
5/16
0.63
5/16
0.69
3/8
0.69
3/8
0.69
3/8
0.75
3/8
0.75
3/8
0.75
3/8
0.81
3/8
0.81
3/8
0.81
3/8
0.88
1/2
0.88
1/2
0.88
1/2
0.88
1/2
0.94
1/2
0.94
1/2
1.00
1/2
1.00
1/2
1.13
1/2
Keyword Index
Solid Steel
Part Number *
Plummer Blocks
NOTES
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
B17-58
Features / Benefits

R Series Pillow Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-4
RTL Series Pillow Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-5
Specification/How To Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-7

Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-7
Selection . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-8

R Series Pillow Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-10
RTL Series Pillow Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-18
RXT Series Pillow Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-20
Modifications/Accessories

End Cap Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-22
Auxiliary Seal Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-23
RTL Replacement Part Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-24
R Series Replacement Part Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-25
SLEEVOIL
SLEEVOIL
Sleeve Bearings
Plummer Blocks
CONTENTS
Trapezoidal Oil Ring (R Series - RTL). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-27
Trapezoidal Oil Ring (RXT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-28
Vibration Detector Adapter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-29

Oil Level And Filtration System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-30
Bearing Isolator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-31
Take-Up Frames
Heater/Thermostat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B18-26
Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1
Keyword Index
Part Number Index
Engineering
Key Word Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEYWORD-1
B18-1
Plummer Blocks
CONTENTS
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
B18-2
GENERAL OPERATING CHARACTERISTICS
FEATURES AND BENEFITS SLEEVOIL
Though originally designed for the exacting requirements of

the air handling industry, R Series SLEEVOIL pillow blocks are
suitable for a wide range of industrial applications where a
precision built, split, babbitted, ring-oiled bearing is required
which is self aligning and quiet in operation.
Fully split housing for trouble-free assembly and disassembly
SLEEVOIL pillow blocks have good cooling capabilities. Water

cooled (WC) and externally cooled (XC) types operate at higher
speeds and load ranges than plain units and function well near
high temperature sources.
Completely self-aligning as a result of ball and socket

mounting between liner and base
For standard SLEEVOIL bearings, the shaft tolerance is

+0.000 / -0.002 with a surface finish of 32 micro-inches or
better.
Convenient oil gage can be positioned on either side of

housing
WHERE SLEEVOIL BEARINGS ARE

CURRENTLY USED
Extended life is a plus with no metal-to-metal contact during

operation. More than ten times the theoretical life of antifriction bearings
Sleeve Bearings
Dependable oil ring lubrication with self-contained oil

supply
High speed capabilities because of self-pressurized full oil

film
SLEEVOIL
Proven reliability and dependable performance guard

against catastrophic failures.
Adequate vibration dampening is handled by the

hydrodynamic oil film which absorbs shock
Engineering
Quiet operation accomplished by full separation of mating

parts
Take-Up Frames
Effective heat transfer accomplished by journal surrounded

by improved coolant chambers
Part Number Index
Motors
Dynamometers
Compressors
Turbines
Babbitt lining offers conformability and shaft protection
Keyword Index
Fans & Blowers

Generators
Test Stands
Pumps
Rugged construction using gray iron housing and liner for

durability
Plummer Blocks
FEATURES/BENEFITS
B18-3
Plummer Blocks
FEATURES/BENEFITS
SLEEVOIL
R Series Pillow Block
1-7/16 size is stocked as a Plain pillow block
Sleeve Bearings
1-11/16 - 3-7/16 sizes are stocked as Plain/Water cooled

(PLWC) pillow block
3-15/16 - 8 sizes are stocked as Plain/Externally Cooled
(PLXC) pillow blocks (standard and short series)
PLXC Liner Only
SLEEVOIL
PLWC Pillow Block

(Plain/Water Cooled)
Take-Up Frames
PLXC Liner Assembly

(Plain/Externally Cooled)
Engineering
Part Number Index
SSL (Short Series)

STL (Standard)
Keyword Index
NOTE:
Water Cooled Replacement Liners
(WC Repl) are also available for
housings made prior to 1973 with
smaller coolant pipes.
B18-4
SLEEVOIL

9 - 14 sizes
XC Pillow Block
Plain Pillow Block
Sleeve Bearings
Plummer Blocks
FEATURES/BENEFITS
SLEEVOIL

Thrust collars convert the expansion bearing into a non-expansion bearing.
Short series housings require less shaft space and are for expansion bearings only.
3-7/16, and larger bore housings are pre-machined for thermocouples, heaters, thermostats, vibration detector adapter kits,
auxiliary seal kits, end cap kits and circulating oil kits.
SLEEVOIL
All R series jacketed liners designated as XC can be air, oil, or water cooled.
3-15/16 - 8, water cooled replacement (WC repl) liners fit in the R series housings. WC repl liners have small pipes.
Take-Up Frames
PLXC Liners will not fit in old WC housings (prior to 1973); R Series housing is required.
SLEEVOIL
Engineering
RTL Series Pillow Block

3-7/16 - 12 Sizes
General Operating Characteristics
RTL pillow block blocks offer excellent radial and thrust load
capacities. Large coolant chambers provide especially effective
heat dissipation when used with circulating coolant systems.
This provides exceptionally strong bearing performance near
high heat sources or gases.
Expansion pillow blocks are furnished as standard. When nonexpansion blocks are specified, a thrust collar and thrust plate
kit are required.
Three times the thrust load capability of the R series.

Suitable for operation near high heat sources.
Pre-machined for thermocouples, circulating oil kit, vibration
detector adapter kit, auxiliary seal kits, end cap kit, heater
and thermostat.
B18-5
Part Number Index
Coolant chambers, which cool both the thrust plates and radial
load sections, are of sufficient size to allow the use of water, air,
or oil as the internal coolant.
Reliable high speed operation.
Keyword Index
The inner liner of the RTL has a center cavity which provides
flooding lubrication to the thrust plates. This cavity acts as a
reservoir to provide lubrication even during start-up and divides
the radial area into two individual load sections. A single thrust
collar is required. If a split collar is used, a shaft recess is
necessary.
RTL Series Pillow Block
Plummer Blocks
FEATURES/BENEFITS
Dodge SLEEVOIL Bearing Isolator
RTL AND R-SERIES PILLOW BLOCKS
Sleeve Bearings
The Dodge SLEEVOIL bearing isolator is a fully split

multi-labyrinth contact sealing system. The stator forms a
complex labyrinth with the rotor to isolate the bearing from
contamination keeping the lubricating oil clean. The tortuous
labyrinth path between the stator and rotor also contains
internal non-metallic seals to limit direct penetration of liquid
or particulate.
The SLEEVOIL isolator is IP56 rated and all seal components
including rotor stator and o-rings are fully split for ease of
assembly and disassembly.
O-rings in the bore of the rotor provide sealing along the
shaft and allow for axial shaft expansion as needed.
SLEEVOIL
The isolator seal is designed to retrofit an existing SLEEVOIL

housing with dovetail grooves on either end.
Take-Up Frames
Setscrew provides additional

clamping to the housing
Seal Stator
Housing O-ring Seals

Rotor Locating Seals
Shaft O-ring Seals
Engineering
Seal Rotor
Expulsion port expels
contaminants from seals
Part Number Index
Keyword Index
B18-6
Plummer Blocks
SPECIFICATION/
HOW TO ORDER
SLEEVOIL - NOMENCLATURE
Standard Series
PB
Pillow Block
PLWC
Plain/Water Cooled
HSG
Housing
SSL
Short Series Loaded
LNR
Liner Assembly
STL
Standard Series Loaded
TC
Thrust Collar
RTL
Radial Thrust Loaded
TPK
Thrust Plate Kit
PL
Plain
BTP
Bronze Thrust Plates
PLXC
Plain/Externally Cooled
(BTP1-Type 1 Lower Liner Only;
SSH
Short Series
BTP2-Type 2 Upper & Lower Liner)
XC
Externally Cooled
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
PAGE B18-10
B18-7
ACCESSORIES
PAGE B18-22
Keyword Index
Part Number Index
Engineering
Take-Up Frames
The product offering has 6-digit part numbers with listing shown throughout this catalog. Use of part numbers ensures
accurate order processing.
SLEEVOIL
STD
Sleeve Bearings
SLEEVOIL BEARING NOMENCLATURE - R & RTL SERIES:
Plummer Blocks
SELECTION
Sleeve Bearings
Dodge SLEEVOIL Application Inquiry Form

Please provide application data by mail, phone or fax:
SLEEVOIL Bearing Application Engineering
Germaine Grant - glgrant@baldor.com (864-281-2253 phone)
Yogi Sharma - ysharma@baldor.com (864-281-2273 phone)
SLEEVOIL
Company Name:
Address:
Contact Name:
Customer Reference:
Installation and Arrangement:
Date:
Response Required By:
Phone ( _______ )
Fax: ( _______ )
Bearing Size in Inches:
Take-Up Frames
Shaft Speed:
Constant _______________ RPM
Variable Speed - Max RPM ____________________ Min RPM ______________
Turning Gear _________________________
Type of Coolant:

Plain (None)
Water
Preferred Lubricant:
SAE10
ISO 32
Air
SAE 20
ISO 68
Engineering
Expected Temperature:
Ambient
Max _______ F Min _________ F
Air Inlet
Max _______ F Min _________ F
Air Velocity over Bearing Housing (FPM):
Plain - Circ Oil
Water Cooled - Circ Oil
SAE30
ISO 100
Other______________________________________
Water Inlet
Oil Inlet
Max _______ F Min _________ F

Max _______ F Min _________ F
Fixed Bearing (Non-Expansion) Free Bearing (Expansion)

RTL
STL RXT RTL
STL SSL
Loading: Base Cap Base Cap
Fixed Bearing Radial Load: _______________ Lbs
Fixed Bearing Thrust Load: _______________ Lbs
RXT
Free Bearing Radial Load: ________________ Lbs.
Part Number Index
Cooling Wheel: Yes No Yes No

External Heat Source (Fan Temperature): _____________ F
Closest Part of Bearing to Heat Source: Fixed Bearing __________ Inches
Free Bearing __________ Inches
Direction of resultant load: Fixed Bearing
Free Bearing
Please state any unusal conditions such as shock loads changes in thrust loads, low speed requirements, hot shaft start-ups,
enviornmental condtions (dust, chemicals gases etc:
Keyword Index
Dodge / P.O. Box 499 / 6040 Ponders Ct. / Greenville, S.C. 29602 - 0499 / 864-297-4800
FEATURES/BENEFITS
PAGE B18-3
EASY SELECTION
PAGE B18-7
PAGE B18-10
B18-8
ACCESSORIES
PAGE B18-22
SLEEVOIL
Sleeve Bearings
Baldor Electric

P.O. Box 499
Greenville SC 29602 -0499
(864) 297-4800

SLEEVOIL Program
Release 9.0.0
14: 32: 35 03/11/2001

SLEEVOIL Bearing Selection Program
Serial No.
Page 1
Filename: Sleeve Bearing Eng / Data Sheets / 2011 / GG110311. UNV
e
l
p
c
e
l
e
> > > > > > > > > Application satisfactory with ISO VG 68 < < < < < < < < <
Calculations based on base loading
With water cooling at 100.0 Deg F and 2.00 GPM.
m
a
Heat generation
Total
3.860
Radial 0.657
Thrust 2.460
Heat gases 0.743
Heat dissipation by water cooling
3.226
Heat dissipation by cooling wheel
0.365
Maximum operating temperature
165.0
Radial bearing film thickness
1.54
Thrust bearing film thickness
0.72
Attitude angle 44.1
Dynamic coefficients (X=horizontal direction, Y=vertical direction)

KXX =
361864.3 LB / IN
CXX =
KXY =
95775.3 LB / IN
CXY =
KYX =
-1025270.0 LB / IN
CYX =
KYY =
19400013.0 LB / IN
CYY =

RIGID ROTOR INSTABILITY THRESHOLD IS UNBOUNDED
1. Bore size and name of SLEEVOIL bearing.

2. Method of lubrication.
3. States whether bearing is non-expansion or expansion
4. Application input data
FEATURES/BENEFITS
PAGE B18-3
Take-Up Frames
ti
HP 9827.6 BTU / HR
HP
HP
HP
HP 8214.9 BTU / HR
HP
930.4 BTU / HR
Deg F
Mils
Mils
Deg
1894.2 LB-S / IN
-1332.8 LB-S / IN
-1332.8 LB-S / IN
12178.8LB-S / IN
5. Acceptance of performance per input

6. Performance output data
7. Oil film dynamic coefficients
EASY SELECTION
PAGE B18-7
PAGE B18-10
B18-9
Engineering
n
o
3.4375 inch SLEEVOIL RTL Oil Ring Lubrication Non-Expansion Bearing

Shaft speed
1780.0 RPM
1603.1 FPM
Radial load
1771.0 Lbs.
95.9 PSI
Thrust load
1596.0 Lbs.
177.3 PSI
Ambient temperature
100.0 Deg F
External heat gases with cooling wheel
752.0 Deg F
External heat source to bearing face
6.0 Inches
Average horizontal clearance
0.01350 Inches STD
Average vertical clearance

0.00600 Inches STD
Part Number Index
ACCESSORIES
PAGE B18-22
Keyword Index
Selection 1 of 4 Comment:
SLEEVOIL
Customer Name GG Fan

Attention Dean King
Phone (589) 258-2365
Email dking@ggfan.com
Reference
Copper Power ID Fan
Plummer Blocks
SELECTION
Plummer Blocks
SLEEVOIL - R Series
1-7/16 THRU 3-7/16 PLAIN-WATER COOLED STANDARD AND SHORT SERIES SLEEVOIL PILLOW BLOCKS
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Shaft
Size
Keyword Index
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
Expansion
Pillow Blocks
Expansion
Pillow Blocks
STD
SSH
(Short Series
Expansion Only)
Part No.
Wt.
132983
20.5
132984
30.7
132985
31.6
132986
47.8
132987
65.5
97.0
132988 V
92.4
132989 V
STL
144.0
132990 V
FEATURES/BENEFITS
PAGE B18-3
Part No.
....
....
....
....
....
....
Wt.
....
....
....
....
....
....
90.0
132991V
SSL
138.0
132992V
Split Thrust Collar

Neoprene End
Closure **
2 Collars Required
To Make A
Non-Expansion
Pillow Blocks
Part No.
Wt.
133245
0.7
133250
1.2
133255
1.0
133260
1.8
133265
2.7
133270
4.1
133275
3.8
Part No.
133980
133981
133982
133983
133984
133985
133986
Wt.
.12
.12
.12
.12
.12
.12
.18
133280
133987
0.31
6.2
PAGE B18-7
SELECTION
PAGE B18-8
B18-10
Replacement
PL-WC Liner
Assemblies
Hose Kits
Part No.
Wt.
133344
0.5
Part No.
133203
133583
133584
133585
133586
132959V
132950V
Wt.
3.6
6.3
7.0
12.0
11.6
27.0
22.0
132951V
50
ACCESSORIES
PAGE B18-22
SLEEVOIL - R Series
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
Shaft
Size
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
H
STD
1-1/2
1-3/4
1-3/4
2
2-3/8
2-15/32
2-15/32
STL
3
STD
2-3/4
3
3
3-1/2
4
4-1/2
4-1/2
STL
6
D (Min.-Max.)
STD
SSH
7
7-1/2
....
....
7-3/4
8-1/4
....
....
7-3/4
8-1/4
....
....
9-1/8
9-7/8
....
....
10-1/8
10-7/8 . . . .
....
11
12
....
....
11
12
10-7/8
12-1/8
STL
SSL
12-15/16-14-1/16
12-15/16-14-1/16
SSH
....
....
....
....
....
....
5-3/4
SSL
6
K
SSH
....
....
....
....
....
....
1-1/2
SSL
3
STD
6
6-3/4
6-3/4
8
8-3/4
9-5/8
9-5/8
STL
11
L
SSH
....
....
....
....
....
....
9-5/8
SSL
11
STD
3
3-1/2
4
4-1/2
5
5-1/2
6
STL
7
M
SSH
....
....
....
....
....
....
6
SSL
7
U1
STD
1/2
1/2
1/2
1/2
1/2
1/2
1/2
STL
3/4
STD
2-3/4
3-1/8
3-1/8
3-3/4
4-1/8
4-9/16
4-9/16
STL
5-1/4
STD
4-5/8
5-3/8
5-3/8
6-3/8
7-1/8
7-7/8
7-7/8
STL
9-3/8
STD
2-1/16
2-1/4
2-1/4
2-1/2
2-15/16
3-1/8
3-1/8
STL
3-7/8
## 2-bolt base
3-7/16 Heater (434719)
F Bolt Dia.
STD
SSH
5/8
....
5/8
....
5/8
....
3/4
....
3/4
....
7/8
....
7/8
3/4
STL
SSL
3/4
3/4
SSH
....
....
....
....
....
....
2-3/4
SSL
3
P
SSH
....
....
....
....
....
....
4-9/16
SSL
5-1/4
G
STD
1
1
1
1-1/4
1-1/4
1-1/2
1-1/2
STL
1-1/2
S
SSH
....
....
....
....
....
....
7-7/8
SSL
9-3/8
V
SSH
....
....
....
....
....
....
1/2
SSL
1/2
E
STD
##
##
##
##
##
##
##
STL
3
STD
....
7/8
7/8
7/8
1-1/16
1-1/8
1-1/8
STL
1-5/16
U
SSH
....
....
....
....
....
....
1-1/8
SSL
1-5/16
STD
1-1/8
1-3/8
1-3/8
1-1/2
1-5/8
1-7/8
1-7/8
STL
2
W
SSH
....
....
....
....
....
....
3-9/16
SSL
3-7/8
STD
1/4
1/4
1/4
1/4
1/4
1/4
1/4
STL
1/2
SSH
....
....
....
....
....
....
1-1/2
SSL
1-1/2
SSH
....
....
....
....
....
....
1-3/4
SSL
2
SSH
....
....
....
....
....
....
1/4
SSL
1/2
....
3-3/4
3-3/4
4-3/4
4-3/4
5-1/8
5-1/8
5-1/2
**
Used to close one end of pillow block. One required for sizes 1-7/16 thru 2-15/16.
Two required for 3-7/16.
Pillow block and liner are pre-drilled for thermocouple (2 places)

STL & SSL are pre-drilled for accessories: thermocouple, circulating oil, vibration
detector, heater and thermostat
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-11
ACCESSORIES
PAGE B18-22
SLEEVOIL
C
SSH
....
....
....
....
....
....
15
SSL
17
Take-Up Frames
Shaft
Size
STD
9-1/2
10-1/2
10-1/2
12-1/2
13-1/2
15
15
STL
17
Engineering
3-7/16
B
SSH
....
....
....
....
....
....
8-3/4
SSL
10
Part Number Index
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
A
STD
6-1/2
7-3/4
7-3/4
9-1/4
10-1/2
11-1/2
11-1/2
STL
13
Keyword Index
Shaft
Size
Sleeve Bearings
1-7/16 THRU 3-7/16 PLAIN-WATER COOLED STANDARD AND SHORT SERIES SLEEVOIL PILLOW BLOCKS
Plummer Blocks
Plummer Blocks
SLEEVOIL - R Series
3-15/16 THRU 8 PLAIN / EXTERNALLY COOLED STANDARD AND SHORT SERIES

SLEEVOIL PILLOW BLOCKS
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Shaft
Size
Keyword Index
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
Pillow Block Assemblies

Expansion
Expansion
Pillow Blocks
Pillow Blocks
SSL
STL
(Short Series Expansion Only)
Part No.
Wt.
Part No.
Wt.
134200
201
134207
193
134201
271
134208
255
134202
362
134209
324
134203
470
134210
462
134204
598
134211
570
134205
882
134212
845
134206
1298
134213
1256
FEATURES/BENEFITS
PAGE B18-3
Split Thrust Collars
Replacement Liner Assemblies
2 Collars Required
To Make A
Non-Expansion STL
Pillow Block
Part No.
133285
133292
133293
133294
133295
133296
133297
PAGE B18-7
Wt.
7.2
7.9
11.3
12.3
15.3
31.3
48.7
PL-XC
Externally Cooled
Part No.
132952
132953
132954
132955
132956
132957
132958
SELECTION
PAGE B18-8
B18-12
Wt.
51
71
92
130
158
230
372
WC
(Prior to 1973 hsg)
Replacement
Part No.
133590
133591
133592
133593
133594
133595
133596
ACCESSORIES
PAGE B18-22
Wt.
54
65
91
114
158
216
375
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
A
STL
15
16-1/2
18-1/4
19-3/4
21-1/4
24-1/2
27-3/4
SSL
11
12-1/2
13-3/4
15-1/4
16-1/4
18-3/4
21
D
(Min.-Max.)
F
Dia. Bolt
19
20-1/2
22-1/2
24-1/2
26
29-3/4
34
7
7-1/2
8-1/2
9-1/2
10-1/2
12-1/2
14-1/2
14-1/4 - 15-3/4
15-1/4 - 16-3/4
16-5/8 - 18-7/8
18-1/4 - 20-1/4
19-5/8 - 21-7/8
22-5/8 - 25-3/8
25-5/8 - 28-7/8
3-1/2
4
4-1/2
5
5-1/2
6-1/2
7-1/2
7/8
1
1
1-1/8
1-1/4
1-1/2
1-3/4
1-3/4
2
**
2-1/4
2-1/2
3
3-1/2
Shaft
Size
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
11-15/16
13-7/8
15-1/16
15-15/16
18
20-1/4
22-1/2
8
9
10
11
12
14
16
5-3/4
6-1/4
7
7-1/2
8-1/4
9-1/2
10-3/4
N
STL
5-15/16
6-3/8
7-1/16
7-5/8
8-1/4
9-9/16
11
Shaft
Size
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
3
3-1/2
3-1/2
3-1/2
4
4-1/2
5
5
5-5/8
6-1/8
6-3/4
7-1/4
8-3/8
9-5/8
8-9/16
9-3/16
10
10-3/8
11-3/16
12-15/16
14-13/16
##
>
*
**
Circulating Oil Inlet

Kits >
Part No.
Wt.
432153
2
430198
2
430198
2
430155
2
430155
2
430155
2
430155
2
N1
SSL
2-5/8
3-3/8
3-3/4
4-3/8
4-1/2
5
5-3/4
10-1/8
11-1/2
12-1/2
13-3/4
14-3/4
17
19
1-1/4
1-3/8
1-5/16
1-9/16
1-3/4
2
2
Y
PLXC
1-1/4
1-1/4
1-1/2
1-1/2
1-3/4
1-3/4
1-3/4
PLXC
1-1/4
1-1/4
1-3/4
1-3/4
2
2
2
Part No.
132192
132192
132193
132193
132198
132198
132198
H
STL
3
3-1/2
3-1/8
3-3/4
4
5-1/8
5-7/8
WC Rept
1
1
1
1
1-1/4
1-1/4
1-1/4
SSL
2-1/8
2
2
2-1/2
2-3/4
3
4
Wt.
1.6
1.6
2.4
2.4
3.6
3.6
3.6
J
SSL
2
3-1/2
2-1/2
2-3/4
3
3-1/2
4
T
STL
2-1/8
3
2-7/8
3-3/8
3-7/8
5
5-1/4
Y1
WC Rept
1
1
1
1
1-1/4
1-1/4
1-1/4
One required per pillow block end

One required per pillow block
220 volt heaters available. See Page B18-26.
2-1/4 on STL; 2 on SSL
FEATURES/BENEFITS
PAGE B18-3
R Pipe
PLXC WC Rept
1
1/2
1
1/2
1-1/4
1/2
1-1/4
1/2
1-1/4
3/4
1-1/4
3/4
1-1/4
3/4
Pipe
Grommet
Kits >
Neoprene End
Closures
Part No.
Wt.
133988
.3
133989
.4
133990
.5
133991
.6
133992
.8
133993
1.2
133994
1.3
STL
12-1/16
14-5/8
15-7/8
17-1/8
17-5/8
19-7/16
21-5/16
SSL
12-5/8
14-5/8
15-7/8
17-1/8
18-1/2
21
23-1/2
U1
STL
3/4
3/4
1
1
1
1-1/4
1-1/4
U2
SSL
3/4
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
U
2-11/16
2-13/16
3-5/16
3
3-1/8
3-3/4
4-9/16
A1
B1
2-1/8
3
2-7/8
3-3/8
3-7/8
5
5-1/4
3/4
3/4
3/4
3/4
1
1
1-1/4
7-1/16
7-5/8
8
8-3/4
9-7/8
10-7/8
12
To differentiate between XC and water cooled replacement liners see

R dimensions (pipe size)
V V Two required per 3-15/16 thru 4-15/16 sizes; three for 5-7/16 and larger
All sizes are pre-machined for accessories: thermocouples, circulating
oil, vibration detector, heater and thermostat
SLEEVOIL
Shaft
Size
Optional Accessories
Heater / Thermostat *
120 Volt
Part No.
Wt.
434721
1.0
434721
1.0
434721
1.0
434721
2.0
434725
2.5
434725
2.5
434727
3.0
Housing End
Cap Kits
Part No.
Wt.
432190
6.1
432193
6.8
432196
7.3
132546
11.6
132547
10.6
132548
13.5
132549
15.5
Take-Up Frames
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
Auxiliary
Seal Kits ##
Part No.
Wt.
432181
6.4
432184
7.0
432187
7.5
133932
12.4
133933
14.8
133937
19.0
133938
24.9
PAGE B18-7
SELECTION
PAGE B18-8
B18-13
ACCESSORIES
PAGE B18-22
Keyword Index
Shaft
Size
Engineering
3-15/16 THRU 8 PLAIN / EXTERNALLY COOLED STANDARD AND SHORT SERIES

SLEEVOIL PILLOW BLOCKS
Part Number Index
SLEEVOIL - R Series
Sleeve Bearings
Plummer Blocks
Plummer Blocks
SLEEVOIL - R Series
9, 10, 12 & 14 PLAIN SLEEVOIL PILLOW BLOCKS
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-14
ACCESSORIES
PAGE B18-22
Plummer Blocks
SLEEVOIL - R Series
9, 10, 12 & 14 PLAIN SLEEVOIL PILLOW BLOCKS
Split Thrust Collars
Shaft
Size
9
10
12
14
Shaft
Size
9
10
12
14
Shaft
Size
9
10
12
14
##
>
*
Auxiliary
Seal Kits ##
Part No.
132814
132816
132819
132822
SSL
21
21
23-1/4
26-1/4
K
STL &
SSL
22-1/2
22-1/2
28-1/4
32-5/8
Housing End
Cap Kits
Wt.
23.1
24.2
40.0
36.0
A
STL
27-3/4
27-3/4
30
34
L
STL &
SSL
16
16
18
20
V1
STL
SSL
1-1/2
1-1/2
2
....
1-1/2
1-1/2
2
....
Part No.
132564
132565
132566
132567
Wt.
54
52
68
75
120 Volt
Wt.
15.9
16.4
25.0
25.0
B
C
STL & SSL STL & SSL
34
14-1/2
34
14-1/2
40
17
46-1/8
18
Part No.
434727
434727
434729
434729
D (Min.-Max.)
STL &SSL
25-5/8 - 28-7/8
25-5/8 - 28-7/8
31-1/4 - 34-3/4
36-1/2 - 40-1/2
M
STL &
SSL
10-3/4
10-3/4
13-1/2
16
N1
STL
SSL
11
11
12-3/8
....
5-1/2
5-1/2
7-3/4
....
B1
STL &
SSL
9-5/8
9-5/8
11
12-1/16
STL &
SSL
5-1/4
5-1/4
7
....
P
STL &
SSL
19
19
23-3/4
28-3/4
Circulating Oil
Inlet Kits >
Wt.
3.0
3.0
4.0
4.0
Part No.
430155
430155
430155
430155
Wt.
2.0
2.0
2.0
2.0
E
F-Bolt
G
STL & SSL STL & SSL STL & SSL
7-1/2
1-3/4
3-1/2
7-1/2
1-3/4
3-1/2
9
2
4
10
2
4
S
STL &
SSL
3
3
3-1/2
....
Wt.
1.5
1.6
1.9
....
Replacement
Plain Liner
Assemblies
Part No.
Wt.
133550
327
133669
450
133392
650
430831
1200
SSL
4
4
6-3/4
...
STL
22-3/8
22-3/8
29-5/16
35-1/8
Neoprene
End Closure##
Part No.
133996
133995
133997
....
H
STL
5-7/8
5-7/8
6-3/4
7
U1
STL
SSL
SSL
STL
5-1/4
5-1/4
7
....
4
4
7
....
3-3/8
3-7/8
5-3/16
....
1-1/4
1-1/4
1-1/2
....
U2
1-1/4
1-1/4
1-1/2
1-1/2
V
STL &
SSL
5
5
7
....
SSL
23-1/2
23-1/2
29-5/16
35-1/8
Wt. (lbs.)
STL
SSL
1235
1240
2000
....
1168
1105
1785
....
STL
12
12
14-1/2.
....

220 volt heaters available. See page B18-26.
FEATURES/BENEFITS
PAGE B18-3
Sleeve Bearings
Part No.
133959
133960
133961
431389
SLEEVOIL
9
10
12
14
Wt.
1235
1240
2000
3400
Take-Up Frames
Shaft
Size
Part No.
132766
132767
132768
431399
Engineering
9
10
12
14
SSL
(Short Series
Expansion Only)
Part No.
Wt.
132924
1168
132925
1105
132926
1785
430561
3000
STL
Part Number Index
Shaft
Size
2 Collars Required To
Make A
Non-Expansion STL
Pillow Blocks
All housings are pre-machined for accessories; thermocouples, circulating oil

vibration detector, heater and thermostat
PAGE B18-7
SELECTION
PAGE B18-8
B18-15
ACCESSORIES
PAGE B18-22
Keyword Index
Plain Expansion Pillow Blocks
Plummer Blocks
SLEEVOIL - R Series
9, 10, 12 XC SLEEVOIL PILLOW BLOCKS
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-16
ACCESSORIES
PAGE B18-22
Plummer Blocks
SLEEVOIL - R Series
9, 10, 12 XC SLEEVOIL PILLOW BLOCKS
Shaft
Size
9
10
12
Shaft
Size
9
10
12
Shaft
Size
9
10
12
Shaft
Size
9
10
12
##
>
Wt.
23.1
24.2
40.0
Part No.
132564
132565
132566
Wt.
15.9
16.4
25.0
XC
120 Volt
Part No.
Wt.
434729
4.0
434729
4.0
434729
....
STL
29
30
34
SSL
22-1/4
23-1/4
...
STL
37
40
46
F-Bolt
SSL
1-3/4
2
....
STL
3-1/2
4
4-1/8
N
STL
11-7/8
12-3/8
....
N1
SSL
5-3/4
5-1/2
....
STL
21-3/4
23-3/4
28-3/4
SSL
10-5/8
11
....
Wt.
2
2
....
Part No.
133996
133995
133997
J
SSL
6
6-3/4
7
SSL
21-3/4
23-3/4
....
Q
STL & SSL
2-1/2
3
....
R Pipe
XC
1-1/4
1-1/2
2
X
XC
16-1/4
17-1/2
20-1/4
Neoprene
End Closure ##
STL
26-13/16
29-5/16
34-3/4
x
*
PAGE B18-7
Z
STL & SSL
6-3/8
7
....
Part No.
132591
132594
132597
STL
25-1/2
28-1/4
33-1/16
SSL
25-1/2
28-1/4
....
U
SSL
5-1/8
6-1/8
....
U1
STL
1-1/2
1-1/2
....
Wt.
300
400
600
E
STL
8
9
10
SSL
8
9
....
L
XC
17
18
20
M
STL & SSL
12
13-1/2
16
V
V1
STL & SSL STL & SSL
5
1-1/2
7
2
....
....
B1
STL
13-5/8
14-1/2
....
SSL
13-5/8
14-1/2
....
All housings are pre-machined for accessories; thermocouples, circulating oil

vibration detector, heater and thermostat
Assembled-to-order, Not L version
SELECTION
PAGE B18-8
B18-17
Liner Assemblies
XC
K
SSL
26-3/4
29-1/4
29-5/16
S
T
STL & SSL STL & SSL
3-3/8
6-3/8
3-1/2
7
....
....
Y
XC
2-1/4
2-5/8
....
Wt.
1.5
1.6
1.9
D (Min.-Max.)
STL
SSL
28-3/8 - 31-5/8 28-3/8 - 31-5/8
31-1/4 - 34-3/4 31-1/4 - 34-3/4
36-5/8 - 40-3/8
....
SSL
15-1/2
17
...
STL
6
6-3/4
7

FEATURES/BENEFITS
PAGE B18-3
Sleeve Bearings
STL
15-1/2
17
18
SSL
3-1/2
4
....
P
W
STL
10-5/8
11
12-1/16
Part No.
430155
430155
....
C
SSL
37
40
STL
1-3/4
2
2
Circulating Oil
Inlet Kits >
SLEEVOIL
Part No.
132814
132816
132819
Housing End
Cap Kits
Take-Up Frames
9
10
12
Auxiliary
Seal Kits ##
Engineering
Shaft
Size
SSL-XC
Part No.
Wt.
1500
133565
1750
133566
....
....
ACCESSORIES
PAGE B18-22
Part Number Index
9
10
12
STL-XC
Part No.
Wt.
1600
132538
2000
132539
132559 x
3300
2 Collars Required To
Make A
Non-Expansion STL
Pillow Block
XC Split Thrust Collars
Part No.
Wt.
133303
57
133304
74
133305
....
Keyword Index
Shaft
Size
Expansion Pillow Blocks

XC (Externally Cooled)
(Short Series Expansion Only)
Plummer Blocks
SLEEVOIL - RTL Series
3-7/16 THRU 12 RTL SLEEVOIL PILLOW BLOCKS
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Shaft
Size
Part Number Index

Keyword Index
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
9
10
12
Expansion
Pillow Blocks
Part No.
132474
132475
132476
132477
132383
132384
132385
132386
132387
132388
132389
Wt.
190
230
300
425
500
825
978
1310
1650
2150
3500
One of Each Required to Make a

Non-Expansion Pillow Block
Thrust
Split Thrust
Plate Kits
Collar
Part No.
Wt.
Part No.
Wt.
137101
2.5
132151
2.6
137102
4.3
132152
4.2
137103
5.4
132153
5.6
137104
6.9
132154
8.7
137105
10.2
132155
10.8
137106
12.7
132156
15.9
137107
17.6
132157
22.4
137108
23.1
132158
34.5
137109
42.6
132159
45.9
137110
52.7
132160
59.8
137111
74.1
132161
96.4
Auxiliary
Seal Kits # #
Part No.
132811
432181
432184
432187
133932
133933
133937
133938
132814
132816
132819
Wt.
4.9
6.4
7.0
7.5
12.4
14.8
19.0
24.9
23.1
24.2
40.0
Housing End
Cap Kits
Part No.
132542
432190
432193
432196
132546
132547
132548
132549
132564
132565
132566
Wt.
5.3
6.1
6.8
7.3
11.6
10.6
13.5
15.5
15.9
16.4
25.0
Part No.
434721
434725
434725
434727
434727
434727
434729
434729
434729
434729
434735
* 220 volt heaters available. See page B18-26.
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-18
ACCESSORIES
PAGE B18-22
Wt.
1.0
2.5
2.5
3.0
3.0
3.0
4.0
4.0
4.0
4.0
7.5
Shaft
Size
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
9
10
12
Shaft
Size
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
9
10
12
132203
132205
D
(Max.-Min.)
F
Dia.
Bolt
10
10-3/4
11-3/4
12-3/4
14
16
18
19-3/4
22-3/4
24-1/2
29
18-3/4
20-3/4
21-3/4
24-1/4
26-3/4
29
33
38
41-1/2
47-1/2
49
6
7
7-1/2
8-1/2
9-1/2
10-1/2
12-1/2
14
15-1/2
17
18
16-1/8 - 14-7/8
18 - 16-1/2
18-7/8 - 17-1/8
21-3/8 - 19-5/8
23-1/4 - 21-1/4
25-1/8 - 22-7/8
28-7/8 - 26-1/8
33-1/8 - 29-7/8
36-5/8 - 33-3/8
41-7/8 - 38-1/8
43-5/8 - 41-7/8
3
3-1/2
4
4-1/2
5
5-1/2
6-1/2
7-1/2
8
9
10
3/4
7/8
1
1
1-1/8
1-1/4
1-1/2
1-3/4
1-3/4
2
2
1-1/2
1-3/4
2
2
2-1/4
2-1/2
3
3-1/2
3-1/2
4
3
2
2-1/4
2-1/2
2-3/4
3-1/4
3-1/2
4
4-1/2
5
6
6-1/2
12-9/16
13-5/8
15-1/4
17-3/8
18-7/8
20-1/8
22-3/8
25-13/16
28-1/4
33-7/8
37
U1
U2
6-3/4
7-1/4
8
8-7/8
10
10-7/8
12-1/2
14-1/8
16-1/4
17-3/4
20-3/4
5-7/8
6-1/2
7
7-3/4
8-3/4
9-1/2
10-3/4
12-1/4
13-1/2
16
17-3/4
3-5/8
4-3/8
4-1/2
5-1/8
5-3/4
6-1/4
6-7/8
8-1/2
9-3/16
11
12-7/16
11-5/8
12-7/8
13-3/4
16
17-1/4
18-3/4
21-1/4
24-1/4
27-1/4
31
35-1/2
1-1/8
1-1/8
1-1/4
1-1/4
1-5/8
1-5/8
2
2-1/4
2-1/4
2-7/8
3-1/8
3/4
1
1
1-1/4
1-1/4
1-1/4
1-1/4
2
2
2-1/2
3
1-3/8
1-1/2
1-1/2
1-5/8
2
2-1/8
2-1/4
2-3/8
3
3-1/8
3-1/4
....
....
....
....
2-15/16
3-1/2
4
5-1/2
5-1/2
8-1/2
9
2-3/4
2-15/16
2-15/16
3-1/4
3-3/4
4
4-1/4
4-3/4
5-1/16
5-9/16
6-1/8
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2-1/2
2-1/2
1-1/8
1-1/4
1-3/8
1-1/2
1-7/8
1-7/8
2
2-1/4
2-1/4
2-7/8
3-1/8
V1
3-1/4
3
3-1/4
3-3/4
4
3-3/4
4-1/2
5
5-1/2
6
6-1/2
3/4
1-1/2
1-5/8
1-3/4
1-3/4
2
2
2
2
2
2
W
3/16
7-5/8
8-11/16
9-1/8
10-3/4
11-7/16
12-3/16
13-3/16
15-11/16
17-1/8
19-13/16
22
A1
B1
C1
D1
8-3/4
9-13/16
10-1/4
12-7/16
12-7/8
13-1/2
14-5/8
17-7/8
19-1/4
22-1/2
24-1/4
1-1/4
1-1/4
1-1/4
1-7/8
1-7/8
1-7/8
1-7/8
2-1/4
2-1/4
2-3/4
3-1/2
3-9/16
4-1/16
4-7/16
5-3/8
5-5/8
6-1/8
6-7/8
8-3/8
9-1/16
10-5/8
12-1/8
3/4
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
7-1/4
7-11/16
8-1/8
8-1/2
9-1/16
10-7/8
12-1/16
13-1/8
14-3/16
15-1/8
19-1/2
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
4-3/16
4-9/16
4-5/8
4-15/16
5-1/4
6- 5/16
6-15/16
7-3/16
8-3/16
8-3/4
9-9/16
# # One required per pillow block end

>
*
For recessed shaft
All sizes are pre-machined for accessories; thermocouples, circulating oil, vibration detector, heater and thermostat
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-19
ACCESSORIES
PAGE B18-22
SLEEVOIL
Wt.
Take-Up Frames
Part No.
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
9
10
12
Replacement
Liner
Assemblies
Part No.
Wt.
132420
47
132421
65
132422
82
132423
113
132424
144
132425
182
132426
257
132427
412
132428
623
132429
955
132430
1405
Circulating Oil
Inlet Kits >
Engineering
Shaft
Size
Part Number Index
3-7/16 THRU 12 RTL SLEEVOIL PILLOW BLOCKS
Keyword Index
Sleeve Bearings
Plummer Blocks
Plummer Blocks
SLEEVOIL - RXT Series
6 THRU 14 RXT SLEEVOIL PILLOW BLOCKS
P
Sleeve Bearings
1-1/4 NPSF
FOR HEATER
1/2 NPSF FOR
THERMOSTAT
SLEEVOIL
U2 NPSF TAP
2-PLACES
CIRC OIL DRAINS
OR OIL GAUGE
F BOLT
M
U
TYP
U1
Z1
Z3
Z2
1/2 NPSF TAP

1-PLACE
PB DRAIN
D
B
Take-Up Frames
SPLIT OIL SEAL (1)

EACH END
(BEARING SEALS
TURNED IN)
S2
NPSF TAP
4-PLACES
CIRC OIL
INLETS
2 SPOTFACE
1/2-20 UNF TAP
FOR VIB DETECTOR
ADAPTER
V1
Engineering
S1
TYP
S
V
K
Part Number Index
1/2 NPSF TAP

1-HOLE EACH SIDE
OPPOSITE CORNERS
FOR THERMOCOUPLE
Keyword Index
FEATURES/BENEFITS
PAGE B18-3
T1
TYP
PAGE B18-7
SELECTION
PAGE B18-8
B18-20
E
C
Y
2-DOWEL
HOLES
ACCESSORIES
PAGE B18-22
Size
6
8
10
For
Shaft
6, 7
8, 9
10, 12, 14
12
14-1/4
17-1/4
34-1/2
41-3/4
49
12
14-5/8
17-3/4
29-1/2
36
42-3/4
6-1/2
8
10
F
Dia. Bolt
1-1/2
1-3/4
2
2-5/8
2-7/8
3-1/8
4-1/2
4-1/2
5-3/8
23-1/16
27-1/4
31-5/8
6-1/2
8-1/2
11
13-1/4
15-1/2
17-3/4
21-1/2
26-3/4
32
31-1/4
38
44
S2
T1
U1
U2
V1
Z1
Z2
Z3
2-7/8
3-5/8
4-9/16
15/16
15/16
1-1/4
3/4
3/4
1
2
2-3/8
3
4
5
6-1/2
8-1/4
10-1/8
12
6
6-1/2
7-5/8
2-1/2
2-1/2
2-1/2
1-3/4
1-3/4
2
....
....
....
23/32
23/32
23/32
2-1/8
3-1/8
3
5-1/4
11-1/2
14
3-1/4
4
4-1/8
9-1/4
11-3/4
14-1/2
Wt.
S Liner
Part No.
T Liner
Part No. ++
Liner
Wt.
Split Thrust
Collar Kit *
134503
740
134716
134717
134516
134517
195
134886
134887
Recessed
Shaft
Split Thrust
Collar Kit > >
432276
432277
134504
1091
134718
134719
134518
134519
353
134888
134889
432165
432278
134505
2126
134720
134721
134779
134520
134521
800
134890
134891
432279
432448
Housing
6
7
8
9
10
12
14
S1
Part No.
10
For
Shaft
Size
Order housings, liners, and seals separately.

#6, 8,& 10 bearing sizes have two oil rings.
Housings include oil ring(s), sight gauge, pipe

plugs, and eye bolts.
++
When ordering the T liner, integral thrust collars

are required. Contact Dodge for exact
shaft dimensions required per #C14203.
For use with S liner only.

Back-up shoulders are required. Contact
Dodge for shaft dimensions per #C11235.
>>
For use with S liner only.

Recessed shaft grooves are required.
Contact Dodge for shaft dimensions per #B48371.
One seal required for each end of housing
Part No.
Fits Shaft
134869
134870
134871
134872
134873
134874
134875
134876
134877
6
7
10
8
9
12
10
12
14-1/2
Part Number Index
Split Seal Ring
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-21
ACCESSORIES
PAGE B18-22
Keyword Index
6
8
10
Oil
(Gal.)
3-1/4
5-1/8
7-3/4
Engineering
For
Shaft
6, 7
8, 9
10, 12, 14
Size
SLEEVOIL
6 THRU 14 RXT SLEEVOIL PILLOW BLOCKS
Take-Up Frames
SLEEVOIL - RXT Series
Sleeve Bearings
Plummer Blocks
Plummer Blocks
MODIFICATIONS/ACCESSORIES
SLEEVOIL Traditional (Inch)
3-7/16" THRU 14" END CAP KITS
SLEEVOIL ACCESSORIES
Sleeve Bearings
SLEEVOIL
Bore
Size
Pillow
Block
Style
3-7/16
Take-Up Frames
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
Engineering
10
12
14
End Cap Kits
Keyword Index
Wt.
A
STL
A1
SSL
B#
C#
STL
C1 #
SSL
Plain/Water
Cooled
STL and SSL
132542
5.3
1/2
7-1/8
6-1/2
4-7/8
3-1/2
2-3/32
15/32
PLXC, STL
and SSL
432190
432193
432196
132546
132547
132548
132549
6.1
6.8
7.3
11.6
10.6
13.5
15.5
1/2
1/2
1/2
1/2
1/2
1/2
1/2
8
8-3/4
9-1/8
10-1/2
11-1/2
12-9/16
14-1/2
132564
15.9
1/2
14-1/2
7-1/2
8-1/4
9-1/8
9-7/8
10-5/8
12-1/4
13-7/8
13-7/8
14-1/2
......
5-1/2
6-1/4
6-7/8
7-5/8
8-1/8
9-3/8
10-1/2
.....
.....
10-1/2
4
4-1/2
5
5-1/2
6
7
8
8
8-1/2
8
2-5/8
2-23/32
3- 3/32
3-3/32
3-11/32
3-29/32
4-17/32
4-17/32
4-21/32
......
5/8
23/32
27/32
27/32
27/32
1-1/32
1- 5/32
.....
.....
1-5/32
......
11-1/8
8-1/2
......
1-9/32
13-7/8
15
.....
.....
8
9
4-17/32
4-21/32
.....
.....
......
10-1/2
......
1-5/32
......
11-5/8
......
1-9/32
15
17
.....
9
10
4-21/32
5-21/32
.....
.....
B#
C#
5
5-3/8
5-7/8
6-3/8
7
8
9
9-7/8
11-3/8
12-1/4
3-3/8
3-5/8
4
4-7/16
5
5-7/16
6-1/4
7-1/16
8-1/8
8-7/8
27/32
29/32
1-1/32
1-3/32
1-5/32
1-11/32
1-17/32
1-19/32
2-1/32
2-1/32
STL Plain
XC
SSL Plain
SSL
XC
STL Plain
XC
SSL
Plain
SSL
XC
STL Plain
STD Plain
132565
132566
132567
16.4
26
26.5
1/2
1/2
1/2
End Cap Kits

Part
Wt.
D
Number
3-7/16
132542
5.3
1/2
3-15/16
432190
6.1
1/2
4-7/16
432193
6.8
1/2
4-15/16
432196
7.3
1/2
5-7/16
132546
11.6
1/2
6
RTL
132547
10.6
1/2
7
132548
13.5
1/2
8
132549
15.5
1/2
9
132564
15.9
1/2
10
132565
16.4
1/2
12
132566
26
1/2
# B+C (OR B+C1) = max. shaft penetration from center line of pillow block
Bore
Size
Part Number Index
Part
Number
Pillow
Block
Style
FEATURES/BENEFITS
PAGE B18-3
14-1/2
18-3/4
18-3/4
E
7-1/8
8
8-3/4
9-1/8
10-1/2
11-1/2
12-9/16
14-1/2
14-1/2
14-1/2
18-3/4
PAGE B18-7
SELECTION
PAGE B18-8
B18-22
PAGE B18-10
Plummer Blocks
SLEEVOIL Traditional (Inch)
A
STL
A1
SSL
Plain/Water Cooled
STL and SSL
132811
4.9
15/16
7-1/8
6-1/2
4-7/8
PLXC, STL
and SSL
432181
432184
432187
133932
133933
133937
133938
6.4
7.0
7.5
12.4
14.8
19.0
24.9
15/16
1
1
1-5/16
1-5/16
1-7/16
1-7/16
8
8-3/4
9-1/8
10-1/2
11-1/2
12-9/16
14-1/2
132814
23.1
1-5/16
7-1/2
8-1/4
9-1/8
9-7/8
10-5/8
12-1/4
13-7/8
13-7/8
14-1/2
......
5-1/2
6-1/4
6-7/8
7-5/8
8-1/8
9-3/8
10-1/2
.....
.....
10-1/2
......
11-1/8
8-1/2
14-1/2
13-7/8
15
......
.....
.....
10-1/2
......
11-5/8
15
17
.....
STL Plain
XC
SSL Plain
SSL
XC
STL Plain
XC
SSL Plain
SSL
XC
STL Plain
STD Plain
10
12
14
14-1/2
132816
132819
132822
22
1-5/16
32
30
1-5/16
1-5/16
Pillow Block
Bore
Size
Style
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
9
10
12
RTL
FEATURES/BENEFITS
PAGE B18-3
18-3/4
18-3/4
Take-Up Frames
Wt.
Auxiliary Seal Kits

Part
Number
132811
432181
432184
432187
133932
133933
133937
133938
132814
132816
132819
Wt.
4.9
6.4
7.0
7.5
12.4
14.8
19.0
24.9
23.1
15/16
15/16
1
1
1-5/16
1-5/16
1-7/16
1-7/16
1-5/16
7-1/8
8
3-3/4
9-1/8
10-1/2
11-1/2
12-9/16
14-1/2
14-1/2
PAGE B18-7
SELECTION
PAGE B18-8
B18-23
A
5
5-3/8
5-7/8
6-3/8
7
8
9
9-7/8
13-7/8
12-1/4
14-1/2
PAGE B18-10
Part Number Index
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
Style
Keyword Index
3-7/16
Auxiliary Seal Kits

Part
Number
Engineering
Pillow Block
Bore
Size
SLEEVOIL
Sleeve Bearings
3-7/16" THRU 14" AUXILIARY SEAL KITS

Plummer Blocks
3-7/16 thru 12 RTL Replacement Part Kits
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Shaft
Part
RTL Seal Kit
Size
Number
3-7/16
435001
3-7/16 SLV RTL Seal Kit
3-15/16
435002
4-7/16
435003
4-15/16
435004
5-7/16
435005
6
435006
6 SLV RTL Seal Kit
7
435007
7 SLV RTL Seal Kit
8
435008
8 SLV RTL Seal Kit
9
435009
9 SLV RTL Seal Kit
10
435010
10 SLV RTL Seal Kit
12
435011
12 SLV RTL Seal Kit
Each kit contains (2) Split Alumimun Clamp Seals, (2) O-Rings & Gasket Eliminator
Shaft
Part
RTL Plunger Screw Kit
Size
Number
3-7/16
435012
3-7/16" SLV RTL Plunger Screw Kit
3-15/16
435012
4-7/16
435013
4-15/16
435014
5-7/16
435015
6
435015
6" SLV RTL Plunger Screw Kit
7
435016
8
435017
9
435018
10
435019
12
435019
Each kit contains Plunger Screw & Plunger Screw Locknut
Shaft
Part
RTL Grommet Kit
Size
Number
3-7/16
435027
3-7/16 SLV RTL Grommet Kit
3-15/16
435028
4-7/16
435028
4-15/16
435029
5-7/16
435029
6
435029
6 SLV RTL Grommet Kit
7
435029
8
435030
9
435030
10
435031
12
435032
Each kit contains (2) grommets & grommet plates, (4) Lock Tubes, (8) Lock Nuts, (4)
Coolant Pipes & Gasket Eliminator
Shaft
Part
RTL - SLEEVOIL Coolant Hose Kit
Size
Number
3-7/16
434770
3/4" SLEEVOIL Coolant Hose Kit
3-15/16
434771
1" SLEEVOIL Coolant Hose Kit
4-7/16
434771
4-15/16
434772
1-1/4"SLEEVOIL Coolant Hose Kit
5-7/16
434772
6
434772
7
434772
8
434773
9
434773
10
434774
2-1/2" SLEEVOIL Coolant Hose Kit
12
434775
Each coolant hose kit contains (2) straight (inlet/outlet) hoses, (1) return hose and the
required couplers, adapters and fittings.
Engineering
18 Long
Part Number Index

Keyword Index
1 I.D. HOSE
32 LONG
Coolant Hose Kit illustrated here.

FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-24
PAGE B18-10
1-7/16 Dust Seal Kit

6 Dust Seal Kit
7 Dust Seal Kit
8 Dust Seal Kit
9 Dust Seal Kit
10 Dust Seal Kit
12 Dust Seal Kit
Each kit contains (2) Dust Seals , (2) Seal Retainers & Gaket Eliminator
* Kit contains (4) seal retainers
Shaft
Size
3-15/16
4-7/16
4-15/16
5-7/16
Part
Number
435012
435021
435021
435013
3-15/16
4-7/16
4-15/16
5-7/16
435015
6 PL-XC Plunger Screw Kit
7
8
9 XC
10 XC
12 XC
9 PL
10 PL
12 PL
435016
435016
435018
435018
435019
435016
435016
435018
7
8
9
10
12
9
10
12
1/4 SLEEVOIL Flexible Water Hose Kit

3-7/16
133344
3-15/16 XC
4-7/16 XC
4-15/16 XC
5-7/16 XC
6 XC
7 XC
8 XC
9 XC
10 XC
12 XC
434771
434771
434772
434772
434772
434772
434772
434772
434797
434773
1 SLEEVOIL Coolant Hose Kit

1-1/4 SLEEVOIL Coolant Hose Kit
Shaft
Size
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
9 PL
9 XC
10 PL
10 XC
12 XC
PL-XC Plunger Screw Kit

R-Series - Coolant Hose Kit
Part
Number
435033
435033
435034
435034
435035
435035
435036
435037
435038
435037
435039
435040
R-Series - SLEEVOIL Grommet Kit

3-15/16 PL-XC Grommet Kit
6 PL-XC Grommet Kit
7 PL-XC Grommet Kit
8 PL-XC Grommet Kit
9 PLAIN Grommet Kit
9 XC Pipe Grommet Kit
10 PLAIN Grommet Kit
Each kit contains (2) Rubber Grommets, (2) Grommet Plates, (8) Screws, (4) Coolant Pipes in PL-XC & XC Grommett Kits only & Gasket Eliminator
Part Number Index
Each kit contains Plunger Screw & Plunger Screw Locknut
Part
Number
133344
133344
133344
133344
133344
133344
Each coolant hose kit contains (2) straight (inlet/outlet) hoses, (1) return hose and the
required couplers, adapters and fittings.
R-Series - SLEEVOIL Plunger Screw Kit

Shaft
Size
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
Plummer Blocks
R-Series - SLEEVOIL Dust Seal Kits
Take-Up Frames
Part
Number
389820
389821
389822
389823
389824
389825
389826
389827
389828
389829
389830
389831
389832
389833
389834
389835
389836
389837
Engineering
Shaft
Size
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
9
10 *
12 *
Sleeve Bearings
SLEEVOIL - R-Series Replacement Part Kits
SLEEVOIL
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-25
PAGE B18-10
Keyword Index
PL-XC grommets and grommet plates pictured here.
Plummer Blocks
SLEEVOIL - Heater / Thermostat
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Shaft
Part
RTL - Combination Heater / Thermostat - 110V
Size
Number
3 -7/16
434721
175 W 110V Immersion Heater / T-Stat Combo
3 -15/16
434725
260 W 110 V Immersion Heater / T-Stat Combo
4- 7/16
434725
4 -15/16
434727
5 -7/16
434727
6
434727
7
434729
8
434729
9
434729
10
434729
12
434735
Single unit - 110V Combination Heater and Thermostat
Shaft
Part
RTL - Combination Heater / Thermostat - 220V
Size
Number
3 -7/16
434722
3 -15/16
434726
4 -7/16
434726
4 -15/16
434728
5 -7/16
434728
6
434728
7
434730
8
434730
9
434730
10
434730
12
434736
Shaft
Part
R-Series - Combination Heater / Thermostat - 110V
Size
Number
2-7/16 *
132834
50 W 110V Immersion Heater
2-11/16 *
132384
2-15/16 *
132384
3-7/16
434719
3-15/16
434721
4-7/16
434721
4-15/16
434721
5-7/16
434721
6
434725
7
434725
8
434727
9 XC
434729
9 PL
434727
10 XC
434729
10 PL
434727
12 XC
434729
12 PL
434729
14 PL
434729
* Requires listed heater part number and thermostat p/n 133116
Shaft
Part
R-Series - Combination Heater / Thermostat - 220V
Size
Number
2 7/16
434835 * 50 W 220V Immersion Heater
2 11/16
2 15/16
3-7/16
434720
3-15/16
434722
4-7/16
434722
4-15/16
434722
5-7/16
434722
6
434726
7
434726
8
434728
9 XC
434730
9 PL
434728
10 XC
434730
10 PL
434728
12 XC
434730
12 PL
434730
14 PL
434730
* Requires listed heater part number and thermostat p/n 133116
Heater / thermostat combo includes LED current indicating light and NEMA 4 LB enclosure
2-7/16, 2-11/16 and 2-15/16 heater (132834 or 434835) to be used with thermostat
part 133116. Combination heater/thermostat is not available for small bore Sleevoil
bearings.
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-26
PAGE B18-10
Plummer Blocks
SLEEVOIL - R Series and RTL Trapezoidal Oil Ring
1-7/16 Thru 14 Trapezoidal Section Oil Ring
Lower operating temperatures
Designed for existing and new Sleevoil bearings
Sleeve Bearings
Interchangeable with T-section oil ring

Increases oil delivered to the shaft
Increases bearing maximum operating speed range
Take-Up Frames
SLEEVOIL
Increases oil ring life
T-Section
Trapezoidal Oil
Number
Ring Number
1-7/16
130063
135700
1-11/16
1-11/16
130044
135704
1-15/16
1-15/16
130045
135708
2-3/16
2-3/16
130047
135712
2-7/16
2-7/16
130049
135716
2-11/16
2-11/16
130050
135720
2-15/16
2-15/16
130051
135724
3-7/16
3-7/16
130054
135728
3-15/16
3-15/16
3-7/16
130056
135290
4-7/16
4-7/16
3-15/16
130057
135291
4-15/16
4-15/16
4-7/16
130058
135292
5-7/16
5-7/16
4-15/16
130059
135293
6
6
5-7/16
130060
135294
6
130078
135295
7
7
130062
135136
8
8
7
130065
135296
9, 10
8
130066
135297
9
130067
135137
9
130068
135298
10
130064
135138
12
130070
135732
12
10
130073
135299
14
130069
135736
12
130071
135135
Note: T-section oil rings will be discontinued and superseded to the Trapezoidal oil rings as inventory is depleted.
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-27
Engineering
RTL
Part Number Index
PLXC or WC Repl.
PAGE B18-10
Keyword Index
Plain
Plummer Blocks
SLEEVOIL RXT Pillow Blocks
2-15/16" THRU 12" Trapezoidal Section Oil Ring

C
D
Sleeve Bearings
A
STYLE A
SLEEVOIL
Take-Up Frames
STYLE B
Ring
No.
3
Engineering
4
5
6
8
Part Number Index
10
Shaft
Size
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
9
10
12
Keyword Index
FEATURES/BENEFITS
PAGE B18-3
Part
Number
WT.
(Lbs)
Style
134796
3.38
6-3/4
7-3/4
1/2
134798
4.10
8-1/4
9-3/8
1-9/64
9/16
134800
5.21
10-5/8
11-3/4
1-9/64
9/16
134803
5.65
12-1/2
13-5/8
1-9/64
9/16
134806
6.89
15-1/4
16-3/8
1-9/64
9/16
134809
8.25
18-1/4
19-3/8
1-9/64
9/16
PAGE B18-7
SELECTION
PAGE B18-8
B18-28
PAGE B18-10
Plummer Blocks
SLEEVOIL
Engineering
Take-Up Frames
SLEEVOIL
Sleeve Bearings
VIBRATION DETECTOR ADAPTER KIT

PART NUMBER 430153
Vibration Detector Adapter Kit

Part Number 430153
SLEEVOIL Accessories
(A) Hole 5 ( .2055) Dia. Drill Thru 1/4-20 Tap Thru - A30935
(B) Hole #32 ( .116) Dia. Drill Thru 6-32 Tap Thru - A30936
(D) Hole 5 ( .2055) dia. Drill Thru 1/4-20 Tap Thru - A30938
Blank Vibration Detector Adapter Kit
Part Number 433326
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-29
PAGE B18-10
Keyword Index
Part Number Index
(C) Hole 7/32 Dia. Drill Thru 1/4-28 Tap Thru - A30937
Plummer Blocks
SLEEVOIL
ONE SYSTEM FOR TWO SLEEVOIL BEARINGS
Oil level and filtration system fits all Dodge SLEEVOIL Bearings
Sleeve Bearings
SLEEVOIL
Five Gallon Tank
Oil Pump Supply Line
Pressure Gauge
Spin on Filter
Standard NEMA Motor
Return Line Connection1 NPT coupling with two inlets
Removable Tank Cover
Oil Level/Temperature Gauge
Mounting Bracket
10
11 Filtered Breather (not shown)
10 Immersion Heater & Thermostat Option1NPT Port
Take-Up Frames
12 Nameplate (not shown)
Oil Level Filtration System Part Numbers:

Description
Oil Inlet Connections:

Part Number
Engineering
Single Phase Motor*,

2.0 GPM Pump
Three Phase Motor*,
2.0 GPM Pump
Three Phase XP-Motor*,
2.0 GPM Pump
SLEEVOIL Series
077587
R Series
077588
1-7/16 3-7/16
Not Required
3-15/16
432153
430198
RTL Series
077484
Need Circulating
Oil Grommet Kit
Part Number
4-7/16 4-15/16
077589
Three Phase Motor (575V)

2.0 GPM Pump
Bore Sizes
5-7/16 12
430155
3-7/16 5-7/16
132203
6 12
132205
*Single Phase Motor 60 Hz 120 Volt *Three Phase Motor 50/60 Hz 230/460 Volt
Part Number Index
Flow Meter Kit (optional1)
Optional Parts1
Keyword Index
Description
Part Number
Combination Heater/Thermostat
260 Watt, 120 Volt Heater
434725
Combination Heater/Thermostat
260 Watt, 240 Volt Heater
434726
Flow Meter Kit
079498
Desiccant Filter Kit

(to be installed in series with standard filter)
079754
Connects to OLF-2 output in

order to control the oil flow rates
between two bearings.
Needle
valves
Manifold
Flow
meters
Not included with OLF2. Order desired part if required.

FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-30
PAGE B18-10
Plummer Blocks
Dodge SLEEVOIL Bearing Isolator
RTL AND R-SERIES PILLOW BLOCKS
B
A
D (Additional length
required per
isolator seal vs
auxiliary seal)
Optional
Slv. Isolator
Optional
Aux. Seal
Standard F
Alu. seal
Sleeve Bearings
SLEEVOIL
Standard
Alu. seal
DOD
RTL HOUSING LENGTH THRU BORE WITH DODGE SEAL OFFERINGS

B*
C*
D*
11-7/8
12-5/8
3/8
12-5/8
13-3/8
3/8
13-3/4
14-3/8
5/16
14-3/4
15-3/8
5/16
16-5/8
16-5/8
0
18-5/8
18-7/8
1/8
20-7/8
20-7/8
0
22-5/8
22-5/8
0
25-3/8
25-5/8
1/8
27-1/8
27-3/8
1/8
31-5/8
31-7/8
1/8
E*
3/4
3/4
5/8
5/8
0
1/4
0
0
1/4
1/4
1/4
F*
7-3/8
8-1/4
9
9-1/2
10-3/4
11-5/8
12-3/4
14-3/4
14-3/4
14-3/4
18-1/2
G*
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-7/16
1-7/16
1-7/16
1-7/16
1-7/16
1-7/16
Part Number Index
NOTES:
A - Length thru housing bore with standard aluminum seal
B - Length thru housing bore with optional auxiliary seals
C - Length thru housing bore with optional isolator seals
D - Additional length required per isolator seal vs auxiliary seal
E - Additional shaft length required
F - Isolator outside diameter
G - Isolator width from housing end face
* - Isolator can also be used with R-Series Pillow Blocks
NOTE: For further information regarding Dodge SLEEVOIL Bearing Isolator, see page B18-6
FEATURES/BENEFITS
PAGE B18-3
PAGE B18-7
SELECTION
PAGE B18-8
B18-31
Take-Up Frames
A*
10
10-3/4
11-3/4
12-3/4
14
16
18
19-3/4
22-3/4
24-1/2
29
Engineering
Part No
434706
434707
434708
434709
434710
434711
434712
434713
434714
434715
434716
PAGE B18-10
Keyword Index
Size (Inches
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
6
7
8
9
10
12
DOD
Plummer Blocks
NOTES
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
B18-32
Take-Up Frames
Features / Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-2
Plummer Blocks
CONTENTS
How To Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-6
Narrow Slot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-8
Wide Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-11
ULTRA KLEEN Stainless Steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-12
Telescoping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-15

Top Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-20
TPHU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-24
Center Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-26
LD Protected Screw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-30
HD Protected Screw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-36
BRONZOIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-44

SLEEVOIL
Sleeve Bearings
Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-7
Type A & B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B19-45
Keyword Index
Part Number Index
Engineering
Key Word Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEYWORD-1
Take-Up Frames
Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1
B19-1
Plummer Blocks
FEATURES/BENEFITS
Take-Up Frames
The flexibility of the ten basic take-up frames allow for the mounting of DODGE Ball, Roller, and Sleeve Bearings to encompass the
vast range of conveyor, belt, and chain take-up applications.
Narrow Slot Take-Up Frame - NS
Five sizes of Narrow Slot Ball Bearing Take-Up Frames-Eleven

(11) take-up frames with travels of 6 to 18 inches for:
Sleeve Bearings
GT & GTM Narrow Slot Take-Up Bearings from 3/4 through

2-7/16 shaft size and metric 20mm to 60mm.
SC, VSC & SCM Ball Bearing Take-Up Bearing from 1/2
through 2-7/16 shaft size, and metric 20 mm to 60 mm.
SXV and SXR Ball Bearing Take-Up Bearing from 3/4
through 2-7/16 shaft size.
DL Ball Bearing Take-Up Bearing from 3/4 through 1-7/16
shaft size.
LT700 and LT1000 SOLlDLUBE Take-Up Bearing from 3/4
SLEEVOIL
Wide Slot Take-Up Frame - WS

Six sizes of Wide Slot Ball Bearing Take-Up Frames-Thirty (30)
take-up frames with travels of 1-1/2 to 30 inches for:
Take-Up Frames
GT & GTM Wide Slot Ball Bearings from 3/4 through 3 shaft
size and metric 20mm to 75mm.
SC, VSC and SCM Wide Slot Take-Up Bearings from 1/ 2
through 3" shaft size, and metric 20 mm to 75 mm.
SXV and SXR Wide Slot Take-Up Bearings from 3/4 through
2-7/16 shaft size.
DL Ball Bearing Take-Up Bearing from 1-7/16 through
1-15/16 shaft size.
LT700 and LT1000 SOLlDLUBE Wide Slot Take-Up Bearing
from 3/4 through 3" shaft size.
Engineering
Telescoping Take-Up Frame - TS

Telescoping Take-Up Frames
Space saving telescoping take-up frame quickly mounts to
the side of a conveyor
Use any standard ball or roller bearing 2-bolt pillow block
Part Number Index
Factory lubricated adjustment screw

Internal take-up frame screw is protected from the
surrounding environment
Bearing mounting plate is standard on all Dodge telescoping
take-up frames.
Available Options
Four bolt mounting plate (4B)
Tapped base mounting plate (TB)
Keyword Index
Weld-on frame (without mounting feet) (WF)

Stainless Steel (SS)
Grease Fitting (GF)
B19-2
Plummer Blocks
FEATURES/BENEFITS
Take-Up Frames
Six sizes of Top Angle Take-Up Frames-Thirty-Six (36)
Take-Up frames with travels of 12 to 48 inches for:
GLT-700 & GLT-1000 Series (SOLIDLUBE Sleeve) Take-Up
bearings from 1-15/16 through 3" shaft size.
Type H (Babbitted Sleeve) Take-Up bearings from
1-15/16 through 3-15/16 shaft size.
Type G (SC Ball Bearing) Take-Up bearings from
Sleeve Bearings
Top Angle Take-Up Frame - TP
Type GXR (SXR Ball Bearing) Take-Up bearings from 1-15/16

Type E (Tapered Roller) Take-Up bearings from 1-3/4 through

4" shaft size.
Type K (Tapered Roller) Take-Up bearings from 1-3/4 through
3-15/16 shaft size.
SLEEVOIL
Type GM (SCM Ball Bearing) Take-Up bearings from

TP S2000 (Spherical Roller) Take-Up bearings from

1-7/8 through 4" shaft size.
TPHU Take-Up Frame
Six sizes of TPHU Take-Up Frames-Twenty-Four (24) Take-Up

frames with travels of 12 to 36 inches for:
Engineering
TPHU S-2000 (Spherical Roller) Take-Up Bearings from

1-7/8 through 5 shaft size.
Take-Up Frames
TPHU Take-Up Frame
Nine sizes of Center Pull Wide Slot Take-Up Frames-Forty-five

(45) take-up frames with travels of 12 to 36 inches for:
Type E tapered wide slot bearing from 1-3/8 to 3" bore size.
Type K tapered wide slot bearing from 1-3/8 to 3" bore size.
S-2000 spherical wide slot bearing from 1-1/8 to 5" bore
size.
Imperial spherical wide slot bearing from 1-7/16 to
4 bore size.
Part Number Index
Center Pull Take-Up Frame - CP
Keyword Index
U.S. Patent No. 4,676,670
B19-3
Plummer Blocks
FEATURES/BENEFITS
Take-Up Frames
BRONZOIL Take-Up Frame - BOTU

Sleeve Bearings
One size of BRONZOlL) Sleeve Bearing Take-Up-The

BRONZOIL Take-Up is recommended for light-to-medium loads
and for use at moderate speeds; such as package conveyors,
light material handling installations, or other similar applications.
There are 6 take-ups from 1/2 through 1 shaft size with 4 inch
travel.
SLEEVOIL
Light Duty Take-Up Frame - LD

Take-Up Frames
Six sizes of LD Protected Screw Take-Up Frames - Forty-Five

(45) take-up frames with 6 to 48 inch travel for:
SC/SCB (Ball Bearing) pillow blocks from 1/2 through
2-15/16 bore size.

SXR/SXRB & SXV/SXVB (Ball Bearing) pillow blocks from 1/2
through 2-7/16 bore size

DL/DLB (Ball Bearing) pillow blocks from 3/4 through
2-15/16 bore size.

SCM (Ball Bearing) pillow blocks from 1-7/16 through
3-1/2 bore size.

Engineering
DLM (Ball Bearing) pillow blocks from 1 through 3-7/16 bore

size
Babbitted (Sleeve) Solid Journal bearing from 1/2 through
2-15/16 bore size.

SOLIDLUBE (Sleeve) LT700 and LT1000 Series pillow blocks
from 3/4 through 3 bore size.

SOLIDLUBE (Sleeve) LTB700 and LTB1000 Series pillow
Part Number Index
blocks from 3/4 through 2-1/2 bore size.

UNISPHERE (Spherical Roller) two (2) bolt base pillow block
from 1-7/16 through 3-1/2 bore sizes.

Imperial (Spherical Roller) two (2) bolt base pillow block from
1-7/16 through 3-15/16 bore size.

SCH, SCH-E SXRH, SXRH-E, DLH, DLH-E SCMH
SCMH-E, DLMH, DLMH-E.

GT/GTB (Ball Bearing) pillow blocks from 1/2 through
2-15/16 bore size

Keyword Index
GTM (Ball Bearing) pillow blocks from 1 through 3-7/16
bore size
B19-4
Take-Up Frames
Eight sizes of HD Protected Screw Take-Up Frames-Forty-One
(41) take-up frames with travels from 12 to 60 inches for:
Plummer Blocks
FEATURES/BENEFITS
Angle Bronze Bushed (Sleeve) pillow blocks from

1-15/16 through 5-15/16, bore size.
Type E (Taper Roller) pillow blocks from 1-1/2 through 6"
bore size.
Type K (Taper Roller) pillow blocks from 1-1/2 through
3-15/16 bore size.
Special Duty (Taper Roller) pillow blocks from 2-11/16

through 6" bore size.
SOLIDLUBE (Sleeve) MM700 and MM1000 Series pillow
blocks from 3-7/16 through 5" bore size.
SAF-XT, TAF, ISAF, etc. (Spherical and Tapered Roller)
pillow blocks from 1-15/16 through 5-1/2 bore size and
larger.
USAF, SAFS spherical pillow blocks, 2-bolt and 4-bolt from
S2000 spherical pillow blocks, 2-bolt and 4-bolt from
1-7/8 through 5" bore size.
UNISPHERE (Spherical Roller) pillow block 2-bolt base from
1-15/16 through 4" bore sizes.
Take-Up Frames
Type C (Taper Roller) pillow blocks from 1-11/16 through 5"

bore size.
SLEEVOIL
K/DI (Taper Roller) pillow blocks from 1-1/2 through 5" bore
size.
Part Number Index
For larger bore bearings use HD600 or HD650, consult

DODGE.
Engineering
Imperial (Spherical roller) pillow block 2-bolt and 4-bolt from

Keyword Index
Heavy Duty Take-Up Frame - HD
Sleeve Bearings
Angle Babbitted (Sleeve) pillow blocks from 1-15/16 through

5-15/16, bore size.
B19-5
Plummer Blocks
HOW TO ORDER
Take-Up Frames
There are two ways to specify DODGE Take-Up Frames. Most of the product offerings have part numbers
with listings shown throughout this catalog. Use of part numbers ensures accurate order processing.
Sleeve Bearings
When part numbers are not shown, the product may be specified by description or part name. This
method is used when ordering units that include modifications or options. To order by description, use the
nomenclature key shown on page B19-7 and add any special instructions to the end of the description for
options not covered by the nomenclature.
NOTE: All Take-Up Frames, except Bronzoil Take-Ups, are without the

Take-Up Bearings. Thus, for a complete Take-Up; order a Take-Up

Frame and Take-Up Bearing.
The HD Protected Screw Take-Up Frames
SLEEVOIL
HD 200 through HD 350 Take-Up frames will accommodate pillow blocks on saddles which are slotted for
two-bolt Pillow Blocks and may be ordered by part numbers. When using four-bolt Pillow Blocks; or on HD
frames 400 and larger, please supply:
1. Bore size of pillow block
2. Type of block (Type E, Double Interlock, SAF-XT, etc.)
3. Whether pillow block is two-or four-bolt style
4. Frame Travel
Take-Up Frames
Modifications:
For OEM special Take-Up Frames consult DODGE.
Certain modifications are available such as Stainless Steel Screw and non-standard travel lengths.
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-6
PAGE B19-8
Take-Up Frames
HD
SIZE
FRAME SIZE DESIGNATION
TRAVEL
INCHES OF TRAVEL
PRODUCT
TAKE-UP FRAME
SLEEVOIL
Center Pull Wide Slot Take-Up Frame

Wide Slot Ball Bearing Take-Up Frame
Ultra Kleen Wide Slot Ball Bearing Take-Up Frame
Narrow Slot Ball Bearing Take-Up Frame
Light Duty Protected Screw Take-Up Frame
Take-Up
Heavy Duty Protected Screw Take-Up Frame
Top Angle Take-Up Frame
Top Angle Heavy Duty Universal Take-Up Frame
Telescoping Take-Up Frame
Type A Babbitted Take-Up Bearing
Type B Babbitted Take-Up Bearing
BRONZOIL Take-Up
Frame
Stainless Steel Screw
Take-Up Frames
CP
WS
WSEZ
NS
LD
TU
HD
TP
TPHU
TS
TUA
TUB
BOTU
FR
SSS
TUFR
Part Number Index
Engineering
TU = Take-Up When Used As An Abbreviation Through This Section
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-7
PAGE B19-8
Keyword Index
STYLE
400X12
Sleeve Bearings
Plummer Blocks
NOMENCLATURE
Plummer Blocks
Take-Up Frames -NS
NARROW SLOT BALL BEARING TAKE-UP FRAMES
Sleeve Bearings
E
S
G
TRAVEL
SLEEVOIL
A
L
R
H
Take-Up Frames
D
B
Engineering
Frame
Description
Part
No.
Wt.
(Lbs.)
NS-210x6-TUFR
NS-308x6-TUFR
NS-308x12-TUFR
NS-400x6-TUFR
NS-400x9-TUFR
NS-400x12-TUFR
NS-400x18-TUFR
NS-407x9-TUFR
NS-407x18-TUFR
NS-415x9-TUFR
NS-415x18-TUFR
038109
038110
038111
038112
038113
038114
038115
038116
038117
038118
038119
Part Number Index

Keyword Index
Frame
Description
NS-210x6-TUFR
NS-308x6-TUFR
NS-308x12-TUFR
NS-400x6-TUFR
NS-400x9-TUFR
NS-400x12-TUFR
NS-400x18-TUFR
NS-407x9-TUFR
NS-407x18-TUFR
NS-415x9-TUFR
NS-415x18-TUFR
5.5
5.8
8.0
9.2
11.3
12.5
16.3
13.1
18.6
15.5
19.0
3-13/16
12-1/8
12-1/8
18-1/8
13-1/16
17-1/8
19-1/16
26-1/8
17-3/8
26-3/8
17-3/8
26-3/8
1-5/8
See
page
B19-10 for
list of
reference
pages for
Take-Up
Bearings
13-5/8
13-5/8
19-5/8
14-9/16
18-5/8
20-9/16
27-5/8
19-1/8
28-1/8
19-1/8
28-1/8
1/4
11-1/32
10-13/16
16-13/16
11-1/16
14-1/16
17-1/16
23-1/16
15-19/32
24-19/32
15-27/32
24-27/32
1/4
1/4
5/16
5/16
FEATURES/BENEFITS
PAGE B19-2
4-11/16
6-1/16
6-1/2
7
K
F BOLT
F Base Bolt
No.
Dia.
4
1/2
G
4-7/8
2-1/4
1/2
5-3/8
2-1/2
1/2
2-3/4
5/8
7-1/8
5/8
7-3/8
Channel
1-13/32
R
Hex
1-5/16
3/4-10
3/4
1-1/2
1-1/2 x 9/16 x 3/16
1-13/32
1-5/16
3/4-10
3/4
1-1/2
1-1/2 x 9/16 x 3/16
1-1/2
7/8-9
3/4
2 x 1 x 3/16
1-7/8
1-5/8
1-8
2 x 1 x 3/16
1-7/8
1-5/8
1-8
2 x 1 x 3/16
1-7/8
See Table
on Page
B19-9 for
L Dim.
PAGE B19-7
B19-8
PAGE B19-8
Plummer Blocks
Take-Up Frames - Narrow Slot Frame
L DIMENSION
208
209
210
211
212
Series
Shaft Size
206
1
1-3/16
1-1/4
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-15/16
2
2-3/16
2-1/4
207
208
209
210
211
212
FEATURES/BENEFITS
PAGE B19-2
SXV
DL
GT
NS-210
2.11
2.11
2.43
2.30
2.16
2.40
NS-210
2.16
2.16
2.44
2.30
2.26
2.36
NS-308
2.32
2.32
2.57
2.43
2.36
2.97
NS-308
2.42
2.42
2.66
2.54
2.46
2.46
NS-400
3.03
3.03
3.21
3.12
3.10
3.07
NS-400
3.03
3.03
3.22
3.10
3.10
3.07
NS-400
3.03
3.03
3.34
3.10
3.10
3.07
NS-407
3.19
3.19
3.55
3.13
3.21
3.10
NS-415
3.26
N/A
3.68
N/A
3.32
3.23
NS-308
SCM
2.32
L
DLM
2.36
GTM
2.47
NS-308
2.42
2.46
2.46
NS-400
3.03
3.10
3.07
NS-400
3.03
3.10
3.07
NS-400
3.03
3.10
3.07
NS-407
3.19
3.21
3.10
NS-415
3.26
3.32
3.23
Take Up Frame
No. Ref.
PAGE B19-7
B19-9
Sleeve Bearings
SXR
SLEEVOIL
207
VSC
Take-Up Frames
206
SC
Engineering
205
1/2
5/8
3/4
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-5/8
1-5/8
1-11/16
1-3/4
1-15/16
2
2
2-3/16
2-1/4
2-1/4
2-7/16
Take Up Frame
No. Ref.
Part Number Index
204
Shaft Size
PAGE B19-8
Keyword Index
Series
Plummer Blocks
Narrow Slot (NS) Take-Up Frame Bearings
Sleeve Bearings
NORMAL DUTY
SETSCREW - SC, VSC
D-LOK - DL
ECCENTRIC LOCK - SXR, SXV
GRIP TIGHT - GT
Series
204
205
SLEEVOIL
206
Take-Up Frames
207
208
209
Engineering
210
211
Part Number Index
212
Shaft
Size
1/2
5/8
3/4
20mm
7/8
15/16
1
25mm
1-1/16
1-1/8
1-3/16
1-1/4
30mm
1-1/4
1-5/16
1-3/8
1-7/16
35mm
1-1/2
1-5/8
40mm
1-5/8
1-11/16
1-3/4
45mm
1-15/16
2
50mm
2
2-3/16
2-1/4
55mm
2-1/4
2-7/16
60mm
Frame
Size
NS-210
MEDIUM DUTY
SETSCREW - SCM
D-LOK - DLM
GRIP TIGHT - GTM
Narrow Slot Take-Up Frames Are Not
Supplied With Bearings. First Match The
Take-Up Frame With The Bearing Size
From This Page. Then Turn To The Page
Listed For The Specific Bearing Part
Number.
Ultra Kleen (SC) - B1-32 to B1-33
NS-210
E-Z Kleen (SC) - B2-38

Extreme Duty (SC) - B3-25 to B3-29
Setscrew (SC, SCM & VSC) - B4-70 to
B4-73
NS-308
Grip Tight (GT and GTM) - B5-50 to B5-53

D-LOK (DL and DLM) - B6-42 to B6-45
Eccentric Lock (SXR and SXV) - B7-32 to
B7-33
NS-308
See B19-8 For Narrow Slot Take-Up

Frame Travel Options And Part Numbers
Series
206
207
208
209
210
211
212
Shaft
Size
1
25mm
1-3/16
1-1/4
30mm
1-7/16
35mm
1-1/2
40mm
1-11/16
1-3/4
45mm
1-15/16
2
50mm
2-3/16
2-1/4
55mm
NS-400
NS-400
NS-400
NS-407
NS-415
Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-10
PAGE B19-8
Frame
Size
NS-308
NS-308
NS-400
NS-400
NS-400
NS-407
NS-415
Plummer Blocks
Take-Up Frames - WS
WIDE SLOT BALL BEARING TAKE-UP FRAMES

B
SLEEVOIL
Frame
Description
Part
No.
Wt.
WS-300X1-1/2-TUFR
WS-300X3-TUFR
WS-300X6-TUFR
WS-300X9-TUFR
WS-300X12-TUFR
WS-308X3-TUFR
WS-308X6-TUFR
WS-308X9-TUFR
WS-308X12-TUFR
WS-308X18-TUFR
WS-400X3-TUFR
WS-400X6-TUFR
WS-400X9-TUFR
WS-400X12-TUFR
WS-400X18-TUFR
WS-502X6-TUFR
WS-502X9-TUFR
WS-502X12-TUFR
WS-502X15-TUFR
WS-502X18-TUFR
WS-502X24-TUFR
WS-515X9-TUFR
WS-515X12-TUFR
WS-515X18-TUFR
WS-515X24-TUFR
WS-515X30-TUFR
WS-608X12-TUFR
WS-608X18-TUFR
WS-608X24-TUFR
WS-608X30-TUFR
038200
038201
038202
038203
038204
038205
038206
038207
038208
038209
038210
038211
038212
038213
038214
038215
038216
038217
038218
038219
038220
038221
038222
038223
038224
038225
038226
038227
038228
038229
4.8
5.5
7
8.5
10
7.5
9
10.5
12
15
11.5
14
16.5
19
24
20
23.5
27
30.5
34
41
36
41
51
61
71
41
51
61
71
FEATURES/BENEFITS
PAGE B19-2
7-1/2
9
See chart
12
on page
15
B19-14 for
18
list of
reference
9-1/8
pages for 12-1/8
Take-Up
15-1/8
Bearings
18-1/8
24-1/8
10-3/4
See Table 13-3/4
on Page
16-3/4
B19-13 for
L Dim. 19-3/4
25-3/4
14-3/4
17-3/4
20-3/4
23-3/4
26-3/4
32-3/4
20-7/8
23-7/8
29-7/8
35-7/8
41-7/8
23-7/8
29-7/8
35-7/8
41-7/8
6-9/16
7-1/16
8-13/16
10-7/16
12
12-9/16
5-3/8
6-7/8
4-15/16 5-9/16
6-7/16
7-15/16
6-7/16
9-7/16
6-7/32
6-1/16
7-23/32
10-23/32
8-1/2
11-1/2
7-1/4
7-5/16
8-3/4
11-3/4
12-1/2
15-1/2
9-1/4
8-5/8
10-3/4
12-1/4
15-1/4
17-1/2
10-1/4
13-1/4
10-1/4
16-1/4
19-1/4
10-1/4
13-1/4
10-13/16
16-1/4
19-1/4
F
No.
4
4
6
6
6
4
4
6
6
6
4
4
6
6
6
4
4
6
6
6
6
4
6
6
6
6
6
6
6
6
PAGE B19-7
B19-11
S
Screw
Dia.
1-1/16 3-1/16
5/8
1-1/4
3/4
1-1/8
5-3/16
1-1/4
1-1/8
1-1/2
2-1/2
6-9/16
1-1/2
2-1/2
7/16 2-15/16
3/16
1-3/4
7/16 3-11/16
3/16
1/2
4-5/16
3/16
2-1/4
1-7/16 4-1/16
9/16 5-11/16
3/16
2-1/2
1-1/2
5/8
6-1/2
1/4
5/8
6-1/2
1/4
Dia.
3-9/16
PAGE B19-8
Take-Up Frames
Engineering
Part Number Index
Sleeve Bearings
TRAVEL
Keyword Index
F BOLTS
Plummer Blocks
Take-Up Frames - WS
ULTRA KLEEN (Stainless Steel) WIDE SLOT BALL BEARING TAKE-UP FRAME
B
Sleeve Bearings
F BOLTS
TRAVEL
SLEEVOIL
Take-Up Frames
K
J
Engineering
Part Number Index
Frame
Description
Part
No.
Wt.
WSEZ-300X3-TUFR-SSS
WSEZ-300X6-TUFR-SSS
WSEZ-300X9-TUFR-SSS
WSEZ-300X12-TUFR-SSS
WSEZ-308X3-TUFR-SSS
WSEZ-308X6-TUFR-SSS
WSEZ-308X9-TUFR-SSS
WSEZ-400X3-TUFR
WSEZ-400X6-TUFR
WSEZ-400X9-TUFR
WSEZ-400X12-TUFR
038070
038071
038072
038073
038074
038075
038076
038077
038078
038060
038061
038062
038063
6
7.9
9.8
11.7
7.3
9.4
11.4
13.4
17.4
11.5
14
16.5
19
See
page
B2-66 to
B2-71
for E-Z
KLEEN
Wide
Slot
Take-Up
Bearings
WSEZ-400X18-TUFR
038064
24
9
6-7/8
12
4-15/16
6-9/16
5-9/16
15
6-7/16
18
7-15/16
9-1/8
6-7/16
12-1/8
9-7/16
15-1/8 7-1/16 6-7/32 6-1/16
18-1/8
7-23/32
24-1/8
10-23/32
See
10-3/4
8-1/2
Table 13-3/4
11-1/2
on Page 16-3/4
8-13/16 7-1/4
7-5/16
B19-13
19-3/4
8-3/4
for L
11-3/4
Dim. 25-3/4
F
No.
4
6
6
6
4
4
6
6
6
4
4
6
6
1/2
2-15/16
3/16
1-3/4
1/2
3-11/16
3/16
1/2
4-5/16
3/16
2-1/4
Dia.
S
Screw
Dia.
1-1/16 3-1/16
5/8
1-1/4
3/4
1-1/8
3-9/16
1-7/16 4-1/16
See table on page B19-13 for L dimension.
Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-12
PAGE B19-8
Series
Shaft Size
206
1
1-3/16
1-1/4
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-15/16
3
204
205
206
207
208
209
210
211
212
214
207
208
209
210
211
212
214
215
216
FEATURES/BENEFITS
PAGE B19-2
VSC SC
SXR
L
SXV
DL
GT
WS-300
1.79
2.11
1.98
1.84
2.08
WS-300
1.84
2.12
1.98
1.94
2.04
WS-308
2.19
2.44
2.30
2.23
2.34
WS-308
2.29
2.53
2.41
2.33
2.33
WS-400
2.63
2.81
2.72
2.70
2.67
WS-400
2.63
2.786
2.70
2.70
3.67
WS-400
2.63
2.94
2.70
2.70
2.67
WS-502
2.85
3.21
2.79
2.87
2.76
WS-502
2.91
3.34
N/A
2.98
2.89
WS-515
3.48
N/A
N/A
3.54
3.55
WS-515
3.47
4.16
N/A
3.58
3.60
WS-308
SCM
2.19
L
DLM
2.23
GTM
2.34
WS-308
2.29
2.33
2.33
WS-400
WS-400
2.63
2.63
2.70
2.70
2.67
2.67
WS-400
2.63
2.70
2.67
WS-502
2.85
2.87
2.76
WS-502
2.91
2.98
2.89
WS-515
3.48
3.54
3.55
WS-515
3.47
3.58
3.60
WS-608
3.50
3.74
3.81
Take Up Frame No.

Ref.
PAGE B19-7
B19-13
SLEEVOIL
215
1/2
5/8
3/4
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-5/8
1-5/8
1-11/16
1-3/4
1-15/16
2
2
2-3/16
2-1/4
2-1/4
2-7/16
2-1/2
2-11/16
2-15/16
Take Up Frame No.

Ref.
Part Number Index
Shaft Size
PAGE B19-8
Keyword Index
Series
Take-Up Frames
L DIMENSION
Engineering
Take-Up Frames - Wide Slot Frame
Sleeve Bearings
Plummer Blocks
Plummer Blocks
Wide Slot (WS) Take-Up Frame Bearings
Sleeve Bearings
NORMAL DUTY
SETSCREW - SC, VSC
D-LOK - DL
GRIP TIGHT - GT
Series
204
205
SLEEVOIL
206
Take-Up Frames
207
208
209
Engineering
210
211
Part Number Index
212
214
215
Shaft
Size
1/2
5/8
3/4
20mm
7/8
15/16
1
25mm
1-1/16
1-1/8
1-3/16
1-1/4
30mm
1-1/4
1-5/16
1-3/8
1-7/16
35mm
1-1/2
1-5/8
40mm
1-5/8
1-11/16
1-3/4
45mm
1-15/16
2
50mm
2
2-3/16
2-1/4
55mm
2-1/4
2-7/16
60mm
2-1/2
2-11/16
70mm
2-15/16
75mm
Keyword Index
FEATURES/BENEFITS
PAGE B19-2
Frame Size
WS-300
MEDIUM DUTY
SETSCREW - SCM, VSC
D-LOK - DLM
GRIP TIGHT - GTM
Wide Slot Take-Up Frames Are Not
Number.
Ultra Kleen (SC) - B1-28 to B1-31
WS-300
EZ-Kleen Polymer Housing - B2-66 to B271 and B2-39
Series
206
207
208
Extreme Duty (SC) - B3-30 to B3-37
WS-308

B4-81
209
Grip Tight (GT & GTM) - B5-54 to B5-59
210

B7-35
WS-308
211
See B19-11 For Wide Slot Take-Up Frame

Travel Options And Part Numbers
212
214
WS-400
215
WS-400
216
Shaft
Size
1
25mm
1-3/16
1-1/4
30mm
1-7/16
35mm
1-1/2
40mm
1-11/16
1-3/4
45mm
1-15/16
2
50mm
2-3/16
2-1/4
55mm
2-7/16
2-1/2
2-11/16
70mm
2-15/16
3
75mm
WS-400
WS-502
WS-502
WS-515
WS-515
PAGE B19-7
B19-14
PAGE B19-8
Frame Size
WS-308
WS-308
WS-400
WS-400
WS-400
WS-502
WS-502
WS-515
WS-515
WS-608
Plummer Blocks
Telescoping (TS) Take-Up Frame
Z-BOLT SIZE
Sleeve Bearings
Y MIN
Y MAX
F-BOLT SIZE
"S" SCREW DIA
SLEEVOIL
3
4
5
5
7
8
9
16
18
21
26
24
28
35
43
50
60
70
90
110
210
240
290
7.94
11.44
15.44
9.75
12.75
15.75
18.75
15.63
18.63
21.63
27.63
19.56
22.56
28.56
34.56
29.75
35.75
41.75
53.75
65.75
43.88
49.88
61.88
3.69
3.69
3.69
4.00
4.00
4.00
4.00
5.25
5.25
5.25
5.25
5.75
5.75
5.75
5.75
7.50
7.50
7.50
7.50
7.50
11.50
11.50
11.50
FEATURES/BENEFITS
PAGE B19-2
D
Min.
Max.
3.56
7.06
11.06
4.38
7.38
10.38
13.38
6.13
10.13
14.13
21.13
12.63
15.63
21.63
27.63
20.00
26.00
32.00
44.00
56.00
31.00
37.00
49.00
13.00
16.00
22.00
28.00
-
E
2.63
2.63
2.63
3.00
3.00
3.00
3.00
4.00
4.00
4.00
4.00
4.50
4.50
4.50
4.50
5.50
5.50
5.50
5.50
5.50
9.00
9.00
9.00
F
Bolt
Dia.
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
1
1
1
S Scr.
Dia.
0.88
0.88
0.88
1.13
1.13
1.13
1.13
1.50
1.50
1.50
1.50
1.75
1.75
1.75
1.75
2.13
2.13
2.13
2.13
2.13
3.50
3.50
3.50
1.50
1.50
1.50
1.88
1.88
1.88
1.88
2.38
2.38
2.38
2.38
2.50
2.50
2.50
2.50
3.50
3.50
3.50
3.50
3.50
3.88
3.88
3.88
1.50
1.50
1.50
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
3.50
3.50
3.50
3.50
3.50
3.88
3.88
3.88
1.50
1.50
1.50
2.00
2.00
2.00
2.00
2.75
2.75
2.75
2.75
3.00
3.00
3.00
3.00
3.50
3.50
3.50
3.50
3.50
7.00
7.00
7.00
6.38
6.38
6.38
7.00
7.00
7.00
7.00
10.00
10.00
10.00
10.00
12.00
12.00
12.00
12.00
14.00
14.00
14.00
14.00
14.00
20.00
20.00
20.00
5/8
5/8
5/8
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1
1
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
PAGE B19-7
B19-15
Y
Min.
Max.
Z Bolt
Dia.
2.94
2.94
2.94
3.81
3.81
3.81
3.81
5.56
5.56
5.56
5.56
5.56
5.56
5.56
5.56
8.50
8.50
8.50
8.50
8.50
5.44
5.44
5.44
5.69
5.69
5.69
5.69
8.69
8.69
8.69
8.69
9.75
9.75
9.75
9.75
11.75
11.75
11.75
11.75
11.75
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
Drilled
to
Order
Drilled
to
Order
Drilled
to
Order
PAGE B19-8
Engineering
TS-100
3
089782
TS-100
6
089783
TS-100
9
089784
TS-250
3
089785
TS-250
6
089786
TS-250
9
089787
TS-250
12
089788
TS-300
6
089789
TS-300
9
089790
TS-300
12
089791
TS-300
18
089792
TS-350
9
089793
TS-350
12
089794
TS-350
18
089795
TS-350
24
089796
TS-400
12
089797
TS-400
18
089798
TS-400
24
089799
TS-400
36
089800
TS-400
48
089801
TS-500
18
089802
TS-500
24
089803
TS-500
36
089804
Dimensions in inches
Wt.
(lbs.)
Part Number Index
Part
No.
Keyword Index
Frame
Travel
Size
Take-Up Frames
Plummer Blocks
Telescoping (TS) Take-Up Frame Bearings
Sleeve Bearings
NORMAL DUTY
SETSCREW - SC, VSC
D-LOK - DL
GRIP TIGHT - GT
Series
204
205
SLEEVOIL
206
Take-Up Frames
207
208
209
Engineering
210
211
Part Number Index
212
214
215
Shaft
Size
1/2
5/8
3/4
20mm
7/8
15/16
1
25mm
1-1/16
1-1/8
1-3/16
1-1/4
30mm
1-1/4
1-5/16
1-3/8
1-7/16
35mm
1-1/2
1-5/8
40mm
1-5/8
1-11/16
1-3/4
45mm
1-15/16
2
50mm
2
2-3/16
2-1/4
55mm
2-1/4
2-7/16
60mm
2-1/2
2-11/16
70mm
2-15/16
75mm
Keyword Index
FEATURES/BENEFITS
PAGE B19-2
Frame Size
TS-100
MEDIUM DUTY
SETSCREW - SCM, VSC
D-LOK - DLM
GRIP TIGHT - GTM
Telescoping Take-Up Frames Are Not
Number.
EZ-KLEEN Polymer Housing - B2-66 to
B2-71
TS-100
TS-250
Series
206
207
Grip Tight (GT & GTM) - B5-54 to B5-59
208

B8-23
209

B7-35
See B19-15 For Telescoping (TS) Take-Up
210
211
TS-250
212
214
TS-250
215
TS-250
216
Shaft
Size
1
25mm
1-3/16
1-1/4
30mm
1-7/16
35mm
1-1/2
40mm
1-11/16
1-3/4
45mm
1-15/16
2
50mm
2-3/16
2-1/4
55mm
2-7/16
2-1/2
2-11/16
70mm
2-15/16
3
75mm
TS-300
TS-300
TS-300
TS-300
TS-350
or
TS-400
PAGE B19-7
B19-16
PAGE B19-8
Frame Size
TS-250
TS-250
TS-250
TS-250
TS-300
TS-300
TS-300
TS-300
TS-350
TS-350
or
TS-400
Plummer Blocks
TAPERED ROLLER BEARINGS
Type K
Double Interlock
TS-250
TS-300
TS-300
TS-350
Frame Size
TS-300
TS-350
TS-400
TS-500
2-11/16
to
3
TS-400
3-15/16
to
4-1/2
TS-500
3-3/16
to
3-1/2
TS-400
4-15/16
to
5
TS-500
3-15/16
to
5
TS-500
Frame Size
TS-400
TS-400
TS-500
TS-500
Type K - B10-40
Type E - B10-22
DOUBLE INTERLOCK - B10-50
TAF - B10-58
Frame Travel Options and Part Numbers
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-17
PAGE B19-8
Keyword Index
Part Number Index
Shaft Size
2-7/16
to
2-1/2
2-15/16
to
3
3-7/16
to
4
4-7/16
to
5
Sleeve Bearings
Shaft Size
1-1/2
to
2-3/16
2-1/4
to
2-1/2
2-11/16
to
3
3-3/16
to
3-1/2
SLEEVOIL
Frame Size
Take-Up Frames
Shaft Size
1-3/16
to
1-1/4
1-3/8
to
2-3/16
1-1/2
to
2-3/16
2-1/4
to
2-1/2
TAF
Engineering
Type E
Plummer Blocks
UNITIZED SPHERICAL ROLLER BEARINGS
Imperial - IP
Shaft Size
S-2000
UNISPHERE II
Sleeve Bearings
SLEEVOIL
Frame Size
Shaft Size
1-1/8
to
1-1/2
TS-250
1-3/8
1-7/16
1-1/2
TS-250
1-5/8
to
2-1/4
TS-300
TS-300
2-3/8
to
2-1/2
TS-350
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
TS-350
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
TS-350
Take-Up Frames
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-11/16
3-15/16
4
4-7/16
4-1/2
TS-350
TS-400
Frame Size
TS-350
TS-400
TS-500
TS-500
Shaft Size
Frame Size
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-1/2
TS-300
2-11/16
2-3/4
2-15/16
3
TS-350
3-7/16
3-1/2
TS-400
3-15/16
4
TS-400
or
TS-500
TS-500
4-15/16
TS-500
Engineering
IMPERIAL & S2000 With Type E

Dimensions
Part Number Index

Keyword Index
Shaft Size
1-3/16
to
1-1/4
1-3/8
to
2-3/16
2-1/4
to
2-1/2
2-11/16
to
3
3-3/16
to
3-1/2
3-15/16
to
5
Frame Size
TS-250
TS-300
S-2000 - B12-14 to B12-25

IMPERIAL - B14-30 to B14-37
UNISPHERE - B13-12 to B3-13
TS-350
TS-400
TS-400
TS-500
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-18
PAGE B19-8
Plummer Blocks
UNIFIED SPHERICAL ROLLER BEARINGS
Shaft Size
Frame Size
1-15/16
TS-300
or
TS-350
TS-400

USAF-500 - B15-78 to B15-81
SAF-XT - B15-64 to B15-74
SAFS - B15-61 to B15-63

SLEEVOIL
TS-400
TS-500
TS-500
TS-500
Part Number Index
Engineering
Take-Up Frames
TS-500
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-19
PAGE B19-8
Keyword Index
2-3/16
2-7/16
to
3
3-3/16
3-7/16
to
3-1/2
3-15/16
to
4-1/2
4-15/16
Sleeve Bearings
USAF-500
SAF-XT
SAFS
ISAF
Plummer Blocks
Take-Up Frames - TP
TOP ANGLE PROTECTED SCREW TAKE-UP FRAMES
Sleeve Bearings
S
J
W
R
H
SLEEVOIL
T (TRAVEL)
U
"F" DIA. BOLT
D
B
Take-Up Frames
Engineering
G
E
C
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-20
PAGE B19-8
TP30
TP40
TP50
TP60
Frame
Size
TP10
TP20
TP30
TP40
TP50
TP60
Wt.
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
036350
036351
036352
036353
036354
036355
036356
036357
036358
036359
036360
036361
036362
036363
036364
036365
036366
036367
32
36
41
34
39
43
47
54
60
52
60
66
63
70
79
84
92
102
28-1/2
34-1/2
40-1/2
29-1/2
35-1/2
41-1/2
30-1/2
36-1/2
42-1/2
32-1/2
38-1/2
44-1/2
34-1/2
40-1/2
46-1/2
38-1/2
44-1/2
50-1/2
Nominal
Travel
Part
No.
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
12
18
24
036350
036351
036352
036353
036354
036355
036356
036357
036358
036359
036360
036361
036362
036363
036364
036365
036366
036367
FEATURES/BENEFITS
PAGE B19-2
8-1/2
9-1/8
10-1/8
11-1/16
12-1/2
14-1/4
3
3
3
3
3
3
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
4
4
4
4-1/2
4-1/2
4-1/2
3-1/2
3-1/2
4-1/2
4-1/2
5-1/2
D
26-1/2
32-1/2
38-1/2
27-1/2
33-1/2
39-1/2
28-1/2
34-1/2
40-1/2
30-1/2
36-1/2
42-1/2
32
38
44
36
42
48
F
Bolt
Dia.
5/8
3/4
5/8
3/4
3/4
1-5/16
3/4
5/8
3/4
3/4
3/4
2-1/2
3/4
3/4
5-5/32
6-1/4
5-25/32
6-3/16
7-1/2
7-3/16
8-1/2
8-7/32
9-5/8
8-29/32
S
Screw
Dia.
3-15/16
6-11/32
3/4
4-3/16
6-31/32
3/4
4-3/8
7-3/8
4-15/16
8-3/8
5-7/16
9-13/32
1-1/4
11-11/32
1-1/4
PAGE B19-7
B19-21
14-1/2
20-1/2
26-1/2
15
21
27
14-1/2
20-1/2
26-1/2
15-1/2
21-1/2
27-1/2
15
21
27
16-1/2
22-1/2
28-1/2
PAGE B19-8
SLEEVOIL
TP20
Part
No.
Take-Up Frames
TP10
Nominal
Travel
Engineering
Frame
Size
Part Number Index
TOP ANGLE PROTECTED SCREW TAKE-UP FRAMES
Keyword Index
Take-Up Frames - TP
Sleeve Bearings
Plummer Blocks
Plummer Blocks
Top Angle (TP) Take-Up Frame Bearings
BALL BEARINGS
Sleeve Bearings
NORMAL DUTY
SETSCREW - G
D-LOK - DL
ECCENTRIC LOCK - GXR
GRIP TIGHT-GT
Series
210
211
212
215
Shaft
Size
1-15/16
2
2-3/16
2-1/4
2-7/16
2-15/16
MEDIUM DUTY
SETSCREW - GM
D-LOK - DLM
GRIP TIGHT - GTM
Frame Size
TP-10
TP-20
TP-30
TP-40
Top Angle Take-Up Frames Are Not

Number.
SLEEVOIL
Grip Tight (GT & GTM) -B5-60 to B5-61

Setscrew (G, & GM) - B4-80 to B4-81
Eccentric Lock (GXR) - B7-36
See B19-21 For Top Angle Take-Up
Frame Travel Options And Part Numbers.
Shaft
Size
1-11/16
1-3/4
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-15/16
3
3-7/16
3-1/2
Series
210
211
212
214
215
216
218
Frame Size
TP-10
TP-20
TP-30
TP-40
TP-40
TP-50
TP-60
Take-Up Frames

TYPE E
Shaft
Size
1-3/4
1-7/8
Engineering
Part Number Index
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-15/16
4
TYPE K
TP-10

Number.
TP-20
Type E - B10-73
Type K - B10-48
Frame Size
TP-30

TP-40
TP-50
Shaft
Size
1-3/4
Frame Size
1-15/16
2
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-7/16
3-1/2
3-15/16
TP-60
Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-22
PAGE B19-8
TP-10
TP-20
TP-30
TP-40
TP-50
TP-60
Plummer Blocks
Top Angle (TP) Take-Up Frame Bearings
S-2000
Frame Size
TP-10
TP-30
TP-40
Top Angle Take-Up Frames Are Not Supplied With Bearings. First
Match The Take-Up Frame With The Bearing Size From This Page.
Then Turn To The Page Listed For The Specific Bearing Part Number.
Sleeve Bearings
Shaft
Size
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
S-2000- B12-10
See B19-21 For Top Angle Take-Up Frame Travel Options And Part
Numbers.
TP-40
SLEEVE BEARINGS
SOLID LUBE BEARING
BABBITTED BEARING
LT-700
LT-1000
TYPE H
TP-20
TP-30
TP-40
Type H Babbitted Bearing - B7-48

Shaft
Size
1-15/16
2-3/16
Frame Size
TP-10
TP-10
2-7/16
TP-30
2-15/16
3-7/16
3-15/16
TP-30
TP-50
TP-50
Engineering
2-7/16
2-1/2
2-15/16
3
TP-10

Number.
SOLIDLUBE Sleeve Bearing (LT7 & LT10) B17-10
Part Number Index
2-3/16
Frame Size
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-23
PAGE B19-8
Keyword Index
Shaft
Size
1-15/16
2
Take-Up Frames
SLEEVOIL
TP-50
TP-60
Plummer Blocks
Take-Up Frames - TPHU
Sleeve Bearings
R
H
T (TRAVEL)
SLEEVOIL
F
G
E
C
Take-Up Frames
Engineering
Part Number Index
Shaft
Size
Frame
Size
1-7/8
1-15/16
2
TPHU110
2-3/16
2-1/4
TPHU120
2-3/8
2-7/16
2-1/2
TPHU130
2-11/16
2-3/4
2-15/16
3
TPHU140
3-3/16
3-1/4
3-7/16
3-1/2
TPHU150
3-11/16
3-15/16
4
TPHU160
Keyword Index
Nom.
Travel
Part
No.
Wt.
12
18
24
12
18
24
12
18
24
12
18
24
30
36
12
18
24
30
36
12
18
24
30
36
013497
013498
013499
013900
013901
013902
013903
013904
013905
013906
013907
013908
013909
013910
013511
013512
013513
013514
013515
013916
013917
013918
013519
013520
58
70
82
71
85
99
73
86
99
80
93
106
119
132
91
105
119
133
147
132
150
168
186
204
29-1/2
35-1/2
41-1/2
29-1/2
35-1/2
41-1/2
30-1/2
36-1/2
42-1/2
32-1/2
38-1/2
44-1/2
50-1/2
56-1/2
34-1/4
40-1/4
46-1/4
52-1/4
58-1/4
38-1/2
44-1/2
50-1/2
56-1/2
62-1/2
FEATURES/BENEFITS
PAGE B19-2
3-1/2
4-1/2
4-1/2
4-1/2
4-1/2
5-1/2
PAGE B19-7
B19-24
D
27-1/2
33-1/2
39-1/2
27-1/2
33-1/2
39-1/2
28-1/2
34-1/2
40-1/2
30-1/2
36-1/2
42-1/2
48-1/2
54-1/2
32
38
44
50
56
36
42
48
54
60
F
Bolt
Dia
5/8
11/16
5/8
11/16
3/4
13/16
5/8
11/16
3/4
13/16
2-1/2
3/4
13/16
PAGE B19-8
1-7/8
1-15/16
2
TPHU110
2-3/16
2-1/4
TPHU120
2-3/8
2-7/16
2-1/2
TPHU130
2-11/16
2-3/4
2-15/16
3
TPHU140
3-3/16
3-1/4
3-7/16
3-1/2
TPHU150
3-11/16
3-15/16
4
TPHU160
Nom.
Travel
Part
No.
12
18
24
12
18
24
12
18
24
12
18
24
30
36
12
18
24
30
36
12
18
24
30
36
013497
013498
013499
013900
013901
013902
013903
013904
013905
013906
013907
013908
013909
013910
013511
013512
013513
013514
013515
013916
013917
013918
013519
013520
S
Screw
Dia.
1/2
10-5/8
3-15/16
6-5/16
3/4
1/2
11-1/4
4-7/16
7-7/16
1/2
11-3/4
4-5/8
7-61/64
3/4
12-5/16
5-1/8
8-1/2
3/4
13-27/32
5-5/8
9-23/32
1-1/4
17
11-5/8
1-1/4
T
Max.
Travel
13-1/2
19-1/2
25-1/2
13-1/2
19-1/2
25-1/2
13-1/2
19-1/2
25-1/2
15-1/2
21-1/2
27-1/2
33-1/2
39-1/2
15-1/2
21-1/2
27-1/2
33-1/2
39-1/2
16-1/2
22-1/2
28-1/2
34-1/2
40-1/2
7-3/4
7-1/2
7-1/2
SLEEVOIL
Frame
Size
8-1/4
9-3/4
Take-Up Frames
Shaft
Size
Plummer Blocks
Take-Up Frames - TPHU
Sleeve Bearings

S-2000
TPHU-110
TPHU-120
TPHU-130
TPHU Take-Up Frames Are Not Supplied With

Bearings. First Match The Take-Up Frame With The
Bearing Size From This Page. Then Turn To The Page
Listed For The Specific Bearing Part Number.
Engineering
Frame Size
S-2000- B12-9
See B19-24 and B19-25 For TPHU Take-Up Frame
Travel Options And Part Numbers.
TPHU-140
FEATURES/BENEFITS
PAGE B19-2
Part Number Index
TPHU-150
TPHU-160
PAGE B19-7
B19-25
PAGE B19-8
Keyword Index
Shaft
Size
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
Plummer Blocks
Take-Up Frames - CP
CENTER PULL (CP)
Sleeve Bearings
L1
H G
K
L2
J (QTY & SIZE) BOLTS
SLEEVOIL
U.S. Patent No. 4,676,670
Take-Up Frames
E
F A
TRAVEL
Engineering
B
C
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-26
PAGE B19-8
Plummer Blocks
Take-Up Frames - CP
CENTER PULL (CP)
S2000 Type
Imperial K & E
Qty.
Size
Dia.
CP308
12
019200
30
15-15/32 15-15/32
26
28
3/4-10NC
CP308
18
019201
34
21-15/32 21-15/32
32
64
3/4-10NC
CP308
24
019202
38
27-15/32 27-15/32 3-7/16
38
40
CP308
30
019203
42
33-15/32 33-15/32
44
46
3/4-10NC
3/4-10NC
11/16
..
1/2
3/4-10NC
CP308
36
019204
46
39-15/32 39-15/32
50
52
CP400
12
019210
55
14-27/32 14-23/32
27-1/2
29-1/2
1-8NC
CP400
18
019211
65
20-27/32 20-23/32
33-1/2
35-1/2
1-8NC
CP400
24
019212
75
26-27/32 26-23/32 3-15/16 39-1/2
41-1/2
CP400
30
019213
85
32-27/32 32-23/32
47-1/2
45-1/2
7-1/4
7-1/4
8-5/8
13/16
..
5/8
1-8NC
1-8NC
CP400
36
019214
95
38-27/32 38-23/32
51-1/2
53-1/2
1-8NC
CP408
12
019220
61
14-5/32 14-3/32
27-1/2
29-1/2
1-1/8-7NC
CP408
18
019221
71
20-5/32 20-3/32
33-1/2
35-1/2
CP408
24
019222
81
26-5/32 26-3/32
39-1/2
41-1/2
CP408
30
019223
85
32-5/32 32-3/32
45-1/2
47-1/2
CP408
36
019224
95
38-5/32 38-3/32
51-1/2
53-1/2
1-1/8-7NC
CP502
12
019230
65
14-13/32 12-31/32
28-1/2
30-1/2
1-1/4-7NC
CP502
18
019231
75
20-13/32 18-31/32
34-1/2
36-1/2
CP502
24
019232
85
26-13/32 24-31/32
40-1/2
42-1/2
CP502
30
019233
95
32-13/32 30-31/32
46-1/2
48-1/2
CP502
36
019234
105
38-13/32 36-31/32
52-1/2
54-1/2
1-1/4-7NC
CP515
12
019240
105
14-23/32 14-15/32
30-1/2
32-1/2
1-1/2-6NC
CP515
18
019241
120
20-23/32 20-15/32
CP515
24
019242
135
26-23/32 26-15/32
CP515
30
019243
150
CP515
36
019244
165
CP613
12
019250
115
15-1/32
4-7/16
4-3/8
1-1/8-7NC
7-3/4
7-3/4
9-1/4
11/16
..
5/8
1-1/8-7NC
1-1/8-7NC
1-1/4-7NC
8-1/4
9-9/16
9-1/2
13/16
..
3/4
1-1/4-7NC
1-1/4-7NC
36-1/2
38-1/2
42-1/2
44-1/2
32-23/32 32-15/32
48-1/2
50-1/2
38-23/32 38-15/32
54-1/2
56-1/2
1-1/2-6NC
32
34-1/4
1-3/4-5NC
5-1/8
CP613
18
019251
135
21-1/32
CP613
24
019252
155
27-1/32
CP613
30
019253
175
33-1/32
5-5/8
38
40-1/4
44
46-1/4
50
52-1/4
1-1/2-6NC
9-1/4
9-3/8
11-5/32
7/8
5/8
1-1/2-6NC
1-1/2-6NC
12-1/16
15/16
3/4
1-3/4-5NC
1-3/4-5NC
CP613
36
019254
195
39-1/32
56
58-1/4
1-3/4-5NC
12
019260
185
16-9/32
36
38-1/2
2-4-1/2-NC
CP810
18
019261
210
22-9/32
CP810
24
019262
235
28-9/32
CP810
30
019263
260
34-9/32
54
56-1/2
2-4-1/2-NC
CP810
36
019264
285
40-9/32
60
62-1/2
2-4-1/2-NC
42
44-1/2
48
50-1/2
2-4-1/2-NC
12
14-3/4
1-3/16
2-1/2
3/4
2-4-1/2-NC
CP908
12
019270
280
17-31/32
40-3/4
45-3/4
2-4-1/2-NC
CP908
18
019271
310
23-31/32
46-3/4
51-3/4
2-4-1/2-NC
CP908
24
019272
340
29-31/32
CP908
30
019273
370
35-31/32
7-1/2
52-3/4
57-3/4
58-3/4
63-3/4
13-1/2
16-1/16
1-1/4
10
1-1/8
2-4-1/2-NC
2-4-1/2-NC
CP908
36
019274
400
41-31/32
64-3/4
69-3/4
2-4-1/2-NC
CP1004
12
019280
370
18-29/32
44-1/2
49-1/2
2-1/4-4-1/2-NC
CP1004
18
019281
400
24-29/32
50-1/2
55-1/2
CP1004
24
019282
430
30-29/32
56-1/2
61-1/2
CP1004
30
019283
460
36-29/32
62-1/2
67-1/2
2-1/4-4-1/2-NC
CP1004
36
019284
490
42-29/32
68-1/2
73-1/2
2-1/4-4-1/2-NC
FEATURES/BENEFITS
PAGE B19-2
8-1/8
See
Page
B19-23
1-3/4-5NC
9-7/8
CP810
L1 &
L2
SLEEVOIL
Take-Up Frames
2-1/4-4-1/2-NC
15-3/8
17-5/16
PAGE B19-7
B19-27
1-1/2
5-1/2
10
1-1/8
2-1/4-4-1/2-NC
PAGE B19-8
Engineering
Sleeve Bearings
Part Number Index
Travel
Frame
Frame
Maximum
Travel
Part
Weight
Type E
Number
S2 & IP
&K
Keyword Index
Frame
Size
Plummer Blocks
Take-Up Frames - CP
CENTER PULL (CP)
Frame
Travel
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Frame
Size
Travel
Frame
Part
Number
Weight
S2 & IP
Type E & K
CP308
12
019200
30
15-15/32
15-15/32
CP308
18
019201
34
21-15/32
21-15/32
CP308
24
019202
38
27-15/32
27-15/32
CP308
30
019203
42
33-15/32
33-15/32
CP308
36
019204
46
39-15/32
39-15/32
CP400
12
019210
55
14-27/32
14-23/32
CP400
18
019211
65
20-27/32
20-23/32
CP400
24
019212
75
26-27/32
26-23/32
CP400
30
019213
85
32-27/32
32-23/32
CP400
36
019214
95
38-27/32
38-23/32
CP408
12
019220
61
14-5/32
14-3/32
CP408
18
019221
71
20-5/32
20-3/32
CP408
24
019222
81
26-5/32
26-3/32
CP408
30
019223
85
32-5/32
32-3/32
CP408
36
019224
95
38-5/32
38-3/32
CP502
12
019230
65
14-13/32
12-31/32
CP502
18
019231
75
20-13/32
18-31/32
CP502
24
019232
85
26-13/32
24-31/32
CP502
30
019233
95
32-13/32
30-31/32
CP502
36
019234
105
38-13/32
36-31/32
CP515
12
019240
105
14-23/32
14-15/32
CP515
18
019241
120
20-23/32
20-15/32
CP515
24
019242
135
26-23/32
26-15/32
CP515
30
019243
150
32-23/32
32-15/32
CP515
36
019244
165
38-23/32
38-15/32
CP613
12
019250
115
15-1/32
CP613
18
019251
135
21-1/32
CP613
24
019252
155
27-1/32
CP613
30
019253
175
33-1/32
CP613
36
019254
195
39-1/32
CP810
12
019260
185
16-9/32
CP810
18
019261
210
22-9/32
CP810
24
019262
235
28-9/32
CP810
30
019263
260
34-9/32
CP810
36
019264
285
40-9/32
CP908
12
019270
280
17-31/32
CP908
18
019271
310
23-31/32
CP908
24
019272
340
29-31/32
CP908
30
019273
370
35-31/32
Imperial
Maximum
Part Number Index
CP908
36
019274
400
41-31/32
CP1004
12
019280
370
18-29/32
CP1004
18
019281
400
24-29/32
CP1004
24
019282
430
30-29/32
CP1004
30
019283
460
36-29/32
CP1004
36
019284
490
42-29/32
Keyword Index
FEATURES/BENEFITS
PAGE B19-2
S2000
Type K
Type E
L1
L2
L1
L2
L1
L2
L1
L2
57/64
1-47/64
53/64
1-45/64
1-1/32
1-1/2
1-1/2
1-1/2
53/64
1-63/64
55/64
1-13/16
1-7/32
1-3/4
1-3/4
1-3/4
59/64
2-7/64
29/32
1-63/64
1-9/32
1-7/8
1-7/8
1-7/8
1-13/64
2-7/32
1-13/64
1-5/8
1-7/32
2-9/32
1-3/16
2-13/32
1-5/8
2-1/4
2-1/4
2-1/4
1-15/32
2-11/16
1-31/64
2-33/64
1-21/32
3-3/64
1-39/64
2-55/64
3-1/16
3-15/32
3-17/64
3-41/64
PAGE B19-7
B19-28
PAGE B19-8
Plummer Blocks
Center Pull Take-Up Frame Bearings
Type E
Shaft
Size
1-3/8
1-7/16
Frame Size
CP-308
1-1/2
CP-400
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
Type K
Center Pull Take-Up Frames Are Not
Number
Type E - B10-30
Type K - B10-46
CP-400
2-3/16
2-7/16
2-1/2
2-15/16
3
CP-408
CP-502
CP-515
CP-408
CP-502
CP-400
CP-408
CP-502
S-2000 - B12-36 to B12-39

See B19-27 and B19-28 For Center Pull
Take-Up Frame Travel Options And Part
Numbers
CP-515
CP-613
CP-810
CP-908
CP-1004
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-29
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-3/16
2-1/4
2-3/8
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-11/16
3-15/16
4
CP308
CP-400
CP-400
Engineering
CP-400
Frame Size
CP-408
CP-502
CP-515
CP-613
CP-810
PAGE B19-8
Part Number Index
CP-308
1-1/2
Shaft
Size
1-1/8
1-3/16
Keyword Index
Frame Size
IMPERIAL - IP
Center Pull Take-Up Frames Are Not

Number
Take-Up Frames
CP-515
S-2000
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
CP-308
CP-400
See B19-27 and B19-28 For Center Pull

Take-Up Frame Travel Options And Part
Numbers

Shaft
Size
1-3/8
1-7/16
Frame Size
SLEEVOIL
2-3/16
2-1/4
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
Shaft
Size
1-7/16
1-15/16
Sleeve Bearings
Plummer Blocks
Take-Up Frames - LD
LD PROTECTED SCREW TAKE-UP FRAMES
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-30
PAGE B19-8
039005
039006
038910
038911
038912
038913
038914
038915
039007
039008
039009
039010
039003
039002
039043
038916
039044
039011
039012
039084
038917
038918
038919
038920
039013
039014
039073
038921
038922
038923
038924
039018
039019
039097
038925
038926
038927
038928
039004
039015
039016
039017
038929
038930
038932
10
11
13
14
16
18
20
22
12
13
14
17
18
20
22
24
26
18
21
24
27
30
33
35
25
28
31
34
37
40
43
50
55
58
65
70
75
80
49
54
60
65
71
77
90
19-1/2
22
25
31
43
49
55
61
19-1/2
22
25
33-1/2
39-1/2
45-1/2
51-1/2
57-1/2
63-1/2
28-1/4
34-1/4
40-1/4
46-1/4
52-1/4
58-1/4
64-1/4
28-1/4
34-1/4
40-1/4
46-1/4
52-1/4
58-1/4
64-1/4
33
39-1/4
45-1/4
51-1/4
57-1/4
63-1/4
69-1/4
27
33
39-1/4
45-1/4
51-1/4
57-1/4
69-1/4
FEATURES/BENEFITS
PAGE B19-2
3-3/4
3-3/4
3-3/4
4-3/4
F
Bolt Dia.
18
20-1/2
23-1/2
29-1/2
41-1/2
47-1/2
53-1/2
59-1/2
18
20-1/22
23-1/2
32
38
44
50
56
62
26-3/4
32-3/4
38-3/4
44-3/4
50-3/4
56-3/4
62-3/4
26-1/2
32-1/2
38-1/2
44-1/2
50-1/2
56-1/2
62-1/2
31-1/4
37-1/2
43-1/2
49-1/2
55-1/2
61-1/2
67-1/2
25-1/4
31-1/4
37-1/2
43-1/2
49-1/2
55-1/2
67-1/2
2-1/2
3/8
1/4
9/16
9/16
2-1/2
1/2
1/4
1-3/4
9/16
2-1/2
1/2
1/4
1-3/4
9/16
5/8
5/16
1-3/4
9/16
3/4
5/16
1-9/16
11/16
3/4
5/16
1-9/16
11/16
PAGE B19-7
B19-31
L
6
5-3/4
5-3/4
5-3/4
5-3/4
5-3/4
5-3/4
5-3/4
6
5-3/4
5-3/4
7
7
7
7
7
7
7-3/8
7-3/8
7-3/8
7-3/8
7-3/8
7-3/8
7-3/8
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
9-3/4
9-3/4
9-3/4
9-3/4
9-3/4
9-3/4
9-3/4
9-5/8
9-3/4
9-3/4
9-3/4
9-3/4
9-3/4
9-3/4
2-3/4
2-1/8
2-19/32
2-1/8
2-11/16
2-1/8
3-3/16
2-1/4
4-1/8
2-1/2
4-1/8
2-1/2
Engineering
Wt.
PAGE B19-8
Part Number Index
Part
No.
Keyword Index
Frame
Size x
Travel
LD-10x6
LD-10x9
LD-10x12
LD-10x18
LD-10x30
LD-10x36
LD-10x42
LD-10x48
LD-20x6
LD-20x9
LD-20x12
LD-20x18
LD-20x24
LD-20x30
LD-20x36
LD-20x42
LD-20x48
LD-30x12
LD-30x18
LD-30x24
LD-30x30
LD-30x36
LD-30x42
LD-30x48
LD-40x12
LD-40x18
LD-40x24
LD-40x30
LD-40x36
LD-40x42
LD-40x48
LD-45x12
LD-45x18
LD-45x24
LD-45x30
LD-45x36
LD-45x42
LD-45x48
LD-50x6
LD-50x12
LD-50x18
LD-50x24
LD-50x30
LD-50x36
LD-50x48
SLEEVOIL
Take-Up Frames
Take-Up Frames - LD
Sleeve Bearings
Plummer Blocks
Plummer Blocks
Take-Up Frames - LD
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Frame
Size x
Travel
Part
No.
Wt.
LD-10x6
LD-10x9
LD-10x12
LD-10x18
LD-10x30
LD-10x36
LD-10x42
LD-10x48
LD-20x6
LD-20x9
LD-20x12
LD-20x18
LD-20x24
LD-20x30
LD-20x36
LD-20x42
LD-20x48
LD-30x12
LD-30x18
LD-30x24
LD-30x30
LD-30x36
LD-30x42
LD-30x48
LD-40x12
LD-40x18
LD-40x24
LD-40x30
LD-40x36
LD-40x42
LD-40x48
LD-45x12
LD-45x18
LD-45x24
LD-45x30
LD-45x36
LD-45x42
LD-45x48
LD-50x6
LD-50x12
LD-50x18
LD-50x24
LD-50x30
LD-50x36
LD-50x48
039005
039006
038910
038911
038912
038913
038914
038915
039007
039008
039009
039010
039003
039002
039043
038916
039044
039011
039012
039084
038917
038918
038919
038920
039013
039014
039073
038921
038922
038923
038924
039018
039019
039097
038925
038926
038927
038928
039004
039015
039016
039017
038929
038930
038932
10
11
13
14
16
18
20
22
12
13
14
17
18
20
22
24
26
18
21
24
27
30
33
35
25
28
31
34
37
40
43
50
55
58
65
70
75
80
49
54
60
65
71
77
90
Keyword Index
FEATURES/BENEFITS
PAGE B19-2
Y Bolt Centers
S
Screw Dia.
5-7/8
1-1/2
5-3/8
3/4
3-1/4
7-3/4
2-1/8
7-1/4
3/4
8-1/2
2-1/4
9-3/4
2-1/2
13-1/2
13-1/2
13-1/2
Max.
Min.
Z
Bolt Dia.
Angle
15/16
4-3/8
2-7/8
3/8 x 1-1/2
2 x 2 x 1/4
3-3/4
15/16
6-1/4
4-7/16
1/2 x 2-1/2
2 x 2 x 1/4
3/4
3-3/4
15/16
5-3/4
5/8 x 2-1/2 2 x 2 x 5/16
9-1/4
3/4
4-3/4
1-1/16
7-7/8
6-3/8
5/8 x 3
2-1/2 x 2-1/2
x 5/16
3-1/2
13
5-7/8
1-1/4
11-1/4
7-1/4
3/4 x 3-1/2
3 x 3 x 1/2
3-1/2
13
5-7/8
1-1/4
11-1/8
7-5/8
7/8 x 4
3 x 3 x 1/2
3-1/2
13
5-7/8
PAGE B19-7
B19-32
PAGE B19-8
Light Duty Take-Up Frame Bearings

BALL BEARINGS
NORMAL DUTY
MEDIUM DUTY
SETSCREW - SC, SCU, SCB, VSC, VSCB

D-LOK - DL, DLB
ECCENTRIC LOCK - SXR, SXRU, SXRB, SXV, SXVU, SXVB
GRIP TIGHT - GT
3/4
LD-10
20mm
7/8
205
15/16
LD-10
25mm
206
207
208
209
210
211
212
214
215
1-1/16
1-1/8
1-3/16
1-1/4
30mm
1-1/4
1-5/16
1-3/8
1-7/16
35mm
1-1/2
1-5/8
40mm
1-5/8
1-11/16
1-3/4
45mm
1-15/16
2
50mm
2
2-3/16
2-1/4
55mm
2-1/4
2-7/16
60mm
2-1/2
2-11/16
70mm
2-15/16
75mm
FEATURES/BENEFITS
PAGE B19-2
206
207
1-1/4
Frame Size
LD-20
LD-20
30mm
EZ-KLEEN Polymer Housing - B1-14 to
B1-29
Grip Tight (GT & GTM)- B2-8 to B2-19
B12-15
Eccentric Lock (SXR & SXV) - B7-12 to
B7-15
D-LOK (DL & DLM) - B6-10 to B10-22
208
212
214
LD-20
215
216
LD-30
LD-20
40mm
211
LD-20
LD-20
1-1/2
209
See B19-32 For Light Duty Take-Up

LD-20
1-7/16
35mm
210
LD-20
Shaft
Size
1
25mm
1-3/16
SLEEVOIL
5/8
204
Series
218
1-11/16
1-3/4
45mm
1-15/16
2
50mm
2-3/16
2-1/4
55mm
2-7/16
2-1/2
65mm
2-11/16
70mm
2-15/16
3
75mm
3-7/16
3-1/2
85mm
LD-30
LD-40
LD-40
Take-Up Frames
LD-10
Light Duty Take-Up Frames Are Not

Number.
LD-45
LD-50
LD-50
Engineering
Frame Size
LD-50
Part Number Index
203
Shaft
Size
1/2
5/8
1/2
LD-40
LD-40
LD-45
LD-50
PAGE B19-7
B19-33
PAGE B19-8
Keyword Index
Series
SETSCREW - SCM, SCH

D-LOK - DLM, DLH
GRIP TIGHT - GTM
Sleeve Bearings
Plummer Blocks
Plummer Blocks
IMPERIAL - IP
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Shaft Size
1-1/8
1-316
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1
11/16
1-3/4
1-7/8
1
15/16
2
2-3/16
2-1/4
2-3/8
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
Frame Size
LD-20
LD-20
LD-30
S-2000
Shaft Size
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
UNISPHERE II
Frame Size
LD-20
LD-20
LD-30
LD-40
LD-40
LD-45
LD-50
LD-40
LD-40

Take-Up Frame With The Bearing Size From
This Page. Then Turn To The Page Listed
For The Specific Bearing Part Number
LD-45
LD-50
S-2000 - B12-14 to B12-17

Unisphere II - B13-12 to B13-13
See B19-32 For Light Duty Take-Up Frame
Travel Options And Part Numbers.
Shaft Size
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-7/16
3-1/2
Frame Size
LD-20
LD-30
LD-40
LD-45
LD-50
Frame Size
Max
Recommended Housing
Cap Load (90 Load
Angle)
LD-10
LD-20
LD-30
LD-40
LD-45
LD-50
2100
3900
6200
6200
9100
12500
Engineering
* Consult the Application Engineering

Department for loads greater than listed. In
all cases, when loads are heavy, the L10 life
of the bearing should be checked for proper
selection and life requirements.
* LD Frames are drilled for two bolt pillow blocks
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-34
PAGE B19-8
Plummer Blocks
SLEEVE BEARING
207
209
210
211
212
215
LD-10
LD-20
LT-700 - B17-10 to B17-13

LT-1000 - B17-10 to B17-13
Babbitt Sleeve - B17-38 to B17-39
See B19-32 For Light Duty Take-Up
Frame Size
1/2
to
LD-10
1-1/4
1-11/16
1-3/4
2-15/16
Sleeve Bearings
1
25mm
1-1/8
1-3/16
30mm
1-1/4
1-3/8
1-7/16
35mm
1-11/16
1-3/4
45mm
1-15/16
2
50mm
2-3/16
55mm
2-7/16
2-1/2
55mm
2-15/16
3
Shaft
Size
LD-20
LD-45
LD-20
LD-20
Take-Up Frames
206
15/16
LD-10

Number
LD-30
LD-40
LD-40
LD-50
Engineering
205
3/4
7/8
Frame Size
Part Number Index
204
Shaft
Size
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-35
PAGE B19-8
Keyword Index
Series
Babbitted Solid
Journal Bearing
SLEEVOIL
LT-700
LT-1000
Plummer Blocks
Take-Up Frames - HD
HD PROTECTED SCREW TAKE-UP FRAMES
TRAVEL
Sleeve Bearings
R
Z
Y
SLEEVOIL
M*
Take-Up Frames
D
B
*M = N + Pillow Block Base to Center Dimemsion
Engineering
A
The HD Protected Screw Take-Up Frames
Part Number Index
HD 200 through HD 350 Take-Up frames will

accommodate pillow blocks on saddles which are
slotted for two-bolt Pillow Blocks and may be ordered by
part numbers. When using four-bolt Pillow Blocks; or on
HD frames 400 and larger, please supply:
1. Bore size of pillow block
2. Type of block (Type E, Double Interlock, USAF, etc.)

3. Whether pillow block is two-or four-bolt style
4. Frame Travel
G
E
C
W
Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-36
PAGE B19-8
HD-300*
HD-350*
HD-400**
HD-500**
Frame
Size
F
Bolt Dia.
12
18
24
30
36
48
12
18
24
30
36
48
60
12
18
24
30
36
48
60
12
18
24
30
36
48
60
12
18
24
30
36
48
60
12
18
24
30
36
48
60
089020
089021
089022
089023
089024
089150
089151
089025
089026
089027
089028
089152
089600
089153
089029
089030
089031
089032
089033
089601
089154
089034
089035
089036
089037
089038
089602
089155
089039
089040
089041
089042
089043
089603
089156
089044
089045
089046
089047
089048
089604
G
Dia.
Frame
Wt.
79
82
90
95
100
110
115
125
135
137
143
153
163
175
184
194
206
214
240
266
195
204
212
220
234
250
276
340
350
360
370
380
400
420
420
440
460
480
500
530
560
HD-200
2-1/2
5/8
3/4
3/4
8-1/2
5-1/4
4
11
HD-250
3
5/8
3/4
3/4
10-3/8
6-1/4
5
13-1/4
HD-300
3
3/4
7/8
7/8
11-3/4
7
6
14-1/4
HD-350
3
3/4
7/8
7/8
12-5/8
7
6
16
HD-400
3
3/4
7/8
7/8
14-5/8
7
6
20
HD-500
4
7/8
1
1
17-1/2
7-3/4
6-3/4
23-1/2
Consult DODGE for HD600 and HD650 Take-Up Frames, for large bore bearings.
Solid saddle must be drilled and tapped per order (HD-400 & HD500 frames)
* Saddle is slotted to receive 2-bolt blocks.
** For 4-bolt pillow blocks, all HD frames must be drilled and tapped per order. Refer to Page B19-36
FEATURES/BENEFITS
PAGE B19-2
31
37
43
47
55
67
35-1/4
41-1/4
47-1/4
53-1/4
59-1/4
71-1/4
83-1/4
38-1/4
44-1/4
50-1/4
56-1/4
62-1/4
74-1/4
86-1/4
40
46
52
58
64
76
88
44
50
56
62
68
80
92
49-1/2
55-1/2
61-1/2
67-1/2
73-1/2
85-1/2
97-1/2
5
5
5
5
5
5
6
6
6
6
6
6
6
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
6-1/2
7
7
7
7
7
7
7
29
35
41
47
53
65
32-3/4
38-3/4
44-3/4
50-3/4
56-3/4
68-3/4
80-3/4
35-1/2
41-1/2
47-1/2
53-1/2
59-1/2
71-1/2
83-1/2
37-1/4
43-1/4
49-1/4
55-1/4
61-1/4
73-1/4
85-1/4
41-1/4
47-1/4
53-1/4
59-1/4
65-1/4
77-1/4
89-1/4
47
53
59
65
71
83
95
Saddle
*Dimensions
Q
R
4
11
4-1/2
13
5
14
6
17
7-1/4
20
8-1/2
23-1/2
PAGE B19-7
B19-37
S
Scr.
Dia.
1
1
1-1/4
1-1/4
1-1/4
1-1/2
7-1/2
8-1/4
10
10
10
12-1/2
2-9/16
3-1/4
3-1/2
3-1/2
3-1/2
3-21/32
Y
Bolt
Dia.
5/8
3/4
3/4
7/8
Z
Max.
Min.
9-1/16 5-15/16
10-7/8
7-5/8
11-5/8
9-1/4
13-11/16 10-3/4
PAGE B19-8
SLEEVOIL
HD-250*
Part No. **
Take-Up Frames
HD-200*
Travel
Engineering
Frame Size
Part Number Index
HD PROTECTED SCREW TAKE-UP FRAMES
Keyword Index
Take-Up Frames - HD
Sleeve Bearings
Plummer Blocks
Plummer Blocks
Take-Up Frames - HD
USING HD PROTECTED SCREW TAKE-UP FRAMES FOR BEARINGS OTHER THAN DODGE
SAE PLAIN WASHER

REG HEX NUT
Sleeve Bearings
AA MAX
AA MIN
SS
Z MIN
Z MAX
Y DIA NATIONAL COURSE

THD. SQ. HD. MACHINE BOLT
SLEEVOIL
AA
Frame
Size
Take-Up Frames
Min.
2
2-5/8
2-31/32
2-27/32
HD-200
HD-250
HD-300
HD-350
Frame
Size
Slotted saddle type HD frames (200 through 350 sizes) may be

used with 2-bolt pillow blocks other than DODGE pillow blocks
listed in tables on previous pages. The dimensions shown below
are listed to determine whether frame is applicable to this type
of application.
Saddle Dimensions
Max.
3-1/64
3-13/16
4-5/32
4-11/16
Y
Bearing Hold Down Bolts
Q
4
4-1/2
5
6
R
11
13
14
17
Z
Bolt Centers
Engineering
SS
Length
Under
Max.
Min.
Head
HD-200
5/8-11
416173
4
3-5/8
9-7/16
5-15/16
HD-250
3/4-10
416229
5
4-17/32
10-7/8
7-5/8
HD-300
3/4-10
416231
5-1/2
4-7/8
11-5/8
9-1/4
HD-350
7/8-9
416275
5-1/2
5
13-11/16
10-3/4
Note: The Pillow Blocks must use the bolt shown and have the capability of mounting between the Z bolt centers. The height off the mounting bolt pad must be within the AA dimensions.
Diameter
Part
Number
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-38
PAGE B19-8
Plummer Blocks
Heavy Duty Take-Up Frame Bearings
Type K
Double Interlock
Shaft Size
1-1/2
to
2-3/16
2-1/4
to
2-1/2
2-11/16
to
3
3-3/16
to
3-1/2
3-15/16
to
4-1/2
4-15/16
to
5
HD-200*
HD-250*
HD-350*
HD-400**
HD-500**
Frame Size
HD-200*
HD-250*
HD-300*
HD-350*
Shaft Size
2-7/16
to
2-1/2
2-15/16
to
3
3-7/16
to
4
4-7/16
to
5
5-7/16
Frame Size
HD-200*
HD-250*
HD-350*
HD-400**
HD-500**
HD-400**
HD-500**
Heavy Duty Take-Up Frames Are Not

Type K - B10-40
Type E - B10-22
DOUBLE INTERLOCK - B10-50
TAF - B10-58
See B19-37 For Heavy Duty Take-Up Frame
Travel Options and Part Numbers
Engineering
Sleeve Bearings
Frame Size
SLEEVOIL
Shaft Size
1-1/2
to
2-1/2
2-11/16
to
3
3-3/16
to
3-1/2
3-15/16
to
5
5-7/16
to
6
TAF
Take-Up Frames
Type E
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-39
PAGE B19-8
Keyword Index
Part Number Index
* HD-200, HD-250, HD-300 and HD 350 Frames Are Drilled For Two Bolt Base Pillow Blocks. For 4-bolt pillow blocks, refer to note on page B19-36.
**HD-400 And Larger Are Drilled And Tapped Per Order. Specify Bearing Type When Ordering.
Plummer Blocks
SPECIALITY TAPERED ROLLER BEARINGS
Special Duty
Sleeve Bearings
SLEEVOIL
Shaft Size
1-3/8
to
2
2-1/8
to
2-1/2
2-3/8
to
3
3-3/16
to
3-1/2
3-11/16
to
4
4-7/16
to
5
Type C
Frame Size
Shaft Size
1-3/8
to
1-15/16
2
to
2-7/16
2-3/8
to
2-15/16
3
to
3-7/16
3-1/2
to
4
4-7/16
to
5
HD-200
HD-250
HD-300
HD-350
HD-400**
HD-500**
All-Steel
Frame Size
HD-200
HD-250
HD-300
HD-350
Shaft Size
2-11/16
to
3
3-7/16
to
3-1/2
3-15/16
to
4
4-7/17
to
5
Frame Size
HD-250*
HD-300*
HD-350*
HD-400**
HD-400**
HD-500**
Take-Up Frames


Engineering
Specialty Duty - B11-30

Type C - B11-8
All Steel - B11-54
*HD-200, HD-250, HD-300 and HD 350 Frames Are Drilled For Two Bolt Base Pillow Blocks. For 4-bolt pillow blocks, refer to note on page B19-36.
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-40
PAGE B19-8
Plummer Blocks
UNITIZED SPHERICAL ROLLER BEARINGS
Shaft Size
1-3/8
1-7/16
1-1/2
1-11/16
1-3/4
1-15/16
2
2-3/16
2-7/16
2-11/16
2-15/16
3
3-7/16
3-15/16
4-7/16
4-15/16
HD-200*
HD-250*
HD-300*
HD-350*
UNISPHERE II
Frame Size
HD-200*
HD-250*
HD-300*
Shaft Size
1-15/16
2
2-3/16
2-7/16
2-1/2
2-11/16
2-3/4
2-15/16
3
3-7/16
3-1/2
3-15/16
4
Frame Size
HD-200
Sleeve Bearings
S-2000
Frame Size
HD-250
HD-300
HD-350
HD-350*
SLEEVOIL
Imperial - IP
HD-400**
Take-Up Frames
HD-400**

Engineering
S-2000 - B12-14 to B12-29

UNISPHERE - B13-12 to B13-13
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-41
PAGE B19-8
Part Number Index
Keyword Index
Shaft Size
1-1/8
to
2-1/2
2-11/16
2-3/4
2-15/16
3
3-3/16
3-1/4
3-7/16
3-1/2
3-11/16
3-15/16
4
4-7/16
4-1/2
4-15/16
5
Plummer Blocks
UNIFIED SPHERICAL ROLLER BEARINGS
Sleeve Bearings
USAF-500
SAF-XT
SAFS
ISAF
Shaft Size
SLEEVOIL
Take-Up Frames
1-15/16
to
2-3/16
2-7/16
to
3
3-3/16
3-7/16
to
3-1/2
3-15/16
to
4-1/2
4-15/16
to
5-1/2
Frame Size
HD-200*
HD-250*
Take-Up Frame Size
Maximum
Recommended Housing
Cap. Loads
** (at 90 load angle)
HD-200
HD-250
HD-300
HD-350
HD-400
HD-500
2800
4200
4200
3500
***
***
HD-300*
HD-350*
HD-400**
HD-500**



USAF-500 - B14-26 to B14-29
SAF-XT - B15-56 to B15-59
SAFS - B15-61 to B15-63

Engineering
Part Number Index

Keyword Index
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-42
PAGE B19-8
Plummer Blocks
SLEEVE BEARINGS
3-15/16
4
4-7/16
4-1/2
4-15/16
5
Frame Size
HD-250*
HD-300*
HD-350*
HD-400**

Number

MM 700 - B17-14
MM 1000 - B17-14
Angle Babbitt - B17-42 to B17-43
Bronze B17-50 to B17-53
See B19-37 For Heavy Duty Take-Up

Shaft
Size
1-15/16
2-3/16
Frame Size
HD-200*
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
HD-250*
Sleeve Bearings
Shaft
Size
3-7/16
3-1/2
Angle Babbitt
Bronze Babbitt
HD-300*
HD-350*
HD-400**
HD-500**
SLEEVOIL
MM-700
MM-1000
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-43
PAGE B19-8
Keyword Index
Part Number Index
Engineering
Take-Up Frames
Plummer Blocks
Take-Up Frames - BRONZOIL
D
Sleeve Bearings
E
R
TRAVEL
J
N
L
A
K
SLEEVOIL
Take-Up Frames
Shaft Size
X Travel
1/2 x 4
5/8 x 4
3/4 x 4
7/8 x 4
15/16 x 4
1x4
Shaft
Size
X Travel
Engineering
1/2 x 4
5/8 x 4
3/4 x 4
7/8 x 4
15/16 x 4
1x4
Size
Part Number Index
1/2
5/8
3/4
7/8
15/18
1
Part
Number
034020
034021
034022
034023
034024
034025
Description
Wt.
BOTU-008X4
BOTU-010X4
BOTU-012X4
BOTU-014X4
BOTU-015X4
BOTU-100X4
1.9
1.8
1.7
2.1
2.0
1.9
1-3/16
7-5/8
4-1/4
5-3/4
3-1/2
1-9/16
7-5/8
4-1/4
5-3/4
3-1/2
F
Bolt
Dia.
R
Hex.
Size
3/8
7/64
7-1/8
29/32
1-7/16
1/2
1-1/4
1/2
1/16
3/8
7/64
7-1/8
29/32
1-5/8
5/16
1-1/4
1/2
1/16
BRONZOIL Take-Up Bearing Assembly

(TUBO---)
1
2
3
Assy. No
034030
034001
405046
034013
034031
034001
405046
034014
034032
034001
405046
034015
034033
034002
405046
034016
034034
034002
405046
034017
034035
034002
405046
034018
444010
444010
444010
444010
444010
444010
3
4
Keyword Index
1.
2.
3.
4.
FEATURES/BENEFITS
PAGE B19-2
BRONZOIL Housing
BRONZOIL Take-Up Oil Cup
BRONZOIL Bushing
BRONZOIL Permawick
PAGE B19-7
B19-44
PAGE B19-8
Plummer Blocks
Sleeve Bearings
Take-Up Bearings - Type A & B
15/16 x 5
1x5
1-3/15 x 5
1-1/4 x 5
1-7/16 x 6
1-7/16 x 12
1-11/16 x 6
1-11/16 x12
1-15/16 x 9
1-15/16 x18
2-3/16 x 9
2-3/16 x18
2-7/16 x 9
2-7/16 x18
FEATURES/BENEFITS
PAGE B19-2
036184
TUA-107-TUBRG
3.5
036185
TUA-111-TUBRG
4.1
036186
TUA-115-TUBRG
6.7
036187
TUA-203-TUBRG
10.1
036188
TUA-207-TUBRG
8.8
Part Number
036270
036193
036194
036274
Type B Take-Up Bearing

Description
TUB-015-TUBRG
TUB-100-TUBRG
TUB-103-TUBRG
TUB-104-TUBRG
Wt.
3.6
3.5
3.3
3.2
036196
TUB-107-TUBRG
4.7
036197
TUB-111-TUBRG
5.4
036198
TUB-115-TUBRG
8.6
036199
TUB-203-TUBRG
12.7
036200
TUB-207-TUBRG
11.4
PAGE B19-7
B19-45
PAGE B19-8
Take-Up Frames
Wt.
2.6
2.5
2.3
2.2
Engineering
Shaft Size
x Travel
Type A Take-Up Bearing

Description
TUA-015-TUBRG
TUA-100-TUBRG
TUA-103-TUBRG
TUA-104-TUBRG
Part Number Index
15/16 x 5
1x5
1-3/15 x 5
1-1/4 x 5
1-7/16 x 6
1-7/16 x12
1-11/16 x 6
1-11/16 x12
1-15/16 x 9
1-15/16 x18
2-3/16 x 9
2-3/16 x18
2-7/16 x 9
2-7/16 x18
Part Number
036180
036181
036182
036183
Keyword Index
Shaft Size
x Travel
SLEEVOIL
TYPE A & B TAKE-UP BEARINGS (Only) TYPE A & B TAKE-UP FRAMES DISCONTINUED
Plummer Blocks
Take-Up Bearings - Type A & B
D
Sleeve Bearings
TRAVEL
TRAVEL
S
U
M
K
K
SLEEVOIL
TYPE TUA
Shaft Size
x Travel
Take-Up Frames
Engineering
15/16 x 5
1x5
1-3/16 x 5
1- 1/4 x 5
1-7/16 x 6
1-7/16 x 12
1-11/16 x 6
1-11/16 x 12
1-15/16 x 9
1-15/16 x 18
2-3/16 x 9
2-3/16 x 18
2-7/16 x 9
2-7/16 x 18
Shaft Size
x Travel
Part Number Index

Keyword Index
15/16 x 5
1x5
1-3/16 x 5
1- 1/4 x 5
1-7/16 x 6
1-7/16 x 12
1-11/16 x 6
1-11/16 x 12
1-15/16 x 9
1-15/16 x 18
2-3/16 x 9
2-3/16 x 18
2-7/16 x 9
2-7/16 x 18
TYPE TUB
2-5/8
9-3/4
4-3/4
3-1/2
3-1/8
1218
5-3/45-3/4
3-3/8
1218
4-1/8
F Bolt
5/16
1-3/8
1/8
8-3/4
1-5/8
68
3/33/8
11
3/163/16
10-1/216-1/2
22
4-3/44-3/4
68
3/83/8
11
3/163/16
10-1/216-1/2
22
56
5-3/45-3/4
810
3/83/8
11
1/41/4
14-1/223-1/2 2-3/42-3/4
6-3/46-3/4
56
5-3/45-3/4
810
3/83/8
11
1/41/4
14-1/223-1/2 2-3/42-3/4
6-3/46-3/4
56
5-3/45-3/4
810
3/83/8
11
1/41/4
14-1/223-1/2 2-3/42-3/4
No.
Dia.
55-1/4
4-3/44-3/4
5-3/45-3/4
55-1/4
1726
6-3/46-3/4
4-7/8
1726
4-7/8
1726
Grease Cup
Pipe Tap
Size
R
Hex.
2-3/4
1-5/8
1-5/16
3/4
2-7/8
3-27/32
1/8
3-5/8
3-3/83-3/8
2-1/22-1/2
1-1/2
7/8
3-3/8
4-19/32
1/4
3-3/4
3-5/83-5/8
2-1/22-1/2
1-1/2
7/8
3-5/8
4-31/32
1/4
4-7/8
4-1/24-1/2
3-3/83-3/8
1-5/8
4-3/8
6-1/32
1/4
5-1/4
4-3/44-3/4
3-1/83-1/8
1-5/8
5-1/8
6-17/32
1/4
5-1/4
4-3/44-3/4
3-3/83-3/8
FEATURES/BENEFITS
PAGE B19-2
PAGE B19-7
B19-46
PAGE B19-8
GENERAL ENGINEERING SECTION

Shafting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-14
Expansion of Shafting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-19
Weights/Properties of Steel Shafting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-20
Oil Viscosity Classification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-22
English Standard Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-23
Metric System of Measurement & Conversions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-26
Common Conversion Factors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-28
Formulas and Constants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-34
Centrifugal Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-35
Flywheel Formulas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-35
Torque and Horsepower Equivalents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-36
Overhung Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-36
Mathematical Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-36
Strength and Physical Properties of Various Metals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-37
Properties of Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-38
Coefficients of Friction (f). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-39
Hardness Comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-39
U.S. Standard Sheet Metal Gages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-39
Trigonometric Formula. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-40
NEMA Quick Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-41
IEC Quick Reference Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-42
Plummer Blocks
Sleeve Bearings
PT COMPONENT ENGINEERING SECTION

V-Belt Drive Formulas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-10
V-Belt Cross Sections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-11
Material Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-12
SLEEVOIL
BEARING ENGINEERING SECTION

Vibration Frequencies of Anti-Friction Mounted Bearings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-2
Bearing Life Adjustment Factors
(Rolling Element Bearings). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B20-8
Take-Up Frames
ENGINEERING/TECHNICAL
Engineering
CONTENT
Keyword Index
Part Number Index
Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1

Keyword Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEYWORD-1
B20-1
Plummer Blocks
ENGINEERING
Vibration Frequencies of DODGE Anti-Friction Mounted Bearings
Sleeve Bearings
More and more manufacturing facilities are getting

involved with plant-wide preventive maintenance
programs. By monitoring vibration levels of motors,
pumps, fans and compressors, maintenance supervisors
can predict imminent failures. Knowing that a piece of
equipment is showing signs of potential failure permits
scheduling of maintenance at an appropriate time and
avoids the consequences of catastrophic failures. Shown
in Tables1 - 10 are vibration frequencies generated by
bearing components defects. All frequencies are based
on unity inner ring or cone rotation.
How to Use the Tables
SLEEVOIL
If a 2-7/16 Type E pillow block is rotating at 1000 RPM,

the vibration due to a failed component will show up at
the following frequencies: (Table3, Line 6)
Frequency
Cup Nick or Spall
Cone Nick or Spall
*Roller Nick or Spall
Cage (Train) Frequency
(Inner Ring Rotation)
= 1000 x 9.251
= 9251 RPM
= 1000 x 11.749 = 11749 PM
= 1000 x 4.011 x 2 = 8022 RPM
= 1000 x 0.441
= 441 RPM
Since all the values in Tables1 - 10 are based on unity

inner ring or cone rotation, the vibration due to flaws will
show up at the frequencies obtained by multiplying the
RPM times the factors found on the appropriate table.
The resulting product will have units of RPM.
Table 1: All Setscrew, Eccentric, D-LOK & GT Ball Bearing Parameters For Vibration Analysis (1-RPS)
Series
Take-Up Frames
Engineering
203
204
205
206
207
208
209
210
211
212
214
215
216
218
SC
Bore
1/2 - 5/8
1/2 - 3/4
7/8 - 1
1-1/6 - 1-1/4
1-1/4 - 1-7/16
1-1/2 - 1-5/8
1-11/16 - 1-3/4
1-15/16 - 2
2-2-1/4
2-1/4 - 2-7/16
2-11/16
2-15/16
SCM
Bore
#
Balls
Diameter
of Balls
Pitch
Diameter
1
1-3/16
1-7/16 - 1-1/2
1-1/2
1-11/16 - 1-3/4
1-15/16 - 2
2-3/16 - 2-1/4
2-7/16 - 2-1/2
2-11/16
2-15/16 - 3
3-7/16 - 3-1/2
8
8
9
9
9
9
9
10
10
10
10
11
11
11
17/64
5/16
5/16
3/8
7/16
1/2
13/25
1/2
9/16
5/8
11/16
11/16
3/4
27/32
1.151
1.325
1.533
1.823
2.136
2.387
2.559
2.765
3.092
3.385
3.775
4.085
4.330
4.920
Part Number Index

Keyword Index
B20-2
Outer Ring
Frequency
Hz
3.078
3.057
3.582
3.575
3.579
3.558
3.586
4.056
4.090
4.077
4.089
4.574
4.547
4.557
Inner Ring
Frequency
Hz
4.923
4.943
5.418
5.426
5.422
5.443
5.414
5.904
5.910
5.923
5.911
6.456
6.453
6.443
* Ball Spin
Frequency
Hz
2.050
2.002
2.350
2.328
2.339
2.283
2.360
2.674
2.657
2.616
2.654
2.887
2.800
2.830
Cage
Frequency
Hz
0.385
0.382
0.398
0.397
0.398
0.395
0.398
0.410
0.410
0.408
0.409
0.416
0.413
0.414
# Rollers
Per Row
Contact
Angle
17.533
16.500
16.000
12.033
13.283
14.500
16.733
18.167
17.567
18.983
17.000
17.750
19.167
Cup
Frequency
Hz
8.326
8.666
7.744
7.241
8.242
9.251
10.792
11.811
11.766
11.282
11.262
14.791
12.289
Cone
* Roller Spin
Frequency
Frequency
Hz
Hz
10.675
3.798
11.334
3.529
10.256
3.377
9.758
3.231
10.758
3.611
11.749
4.012
13.208
4.708
14.189
5.152
14.235
4.974
13.718
4.807
13.738
4.782
17.209
6.266
14.711
5.222
Pd = Pitch Diameter
N = Number of rollers
Bd = Roller Diameter
a = Cup Angle (contact angle)
Cage
Frequency
Hz
0.438
0.433
0.430
0.426
0.434
0.441
0.450
0.454
0.453
0.451
0.455
0.462
0.455
SLEEVOIL
Mean
Pitch
Diameter
Diameter
of Rollers
1-3/16 - 1-1/4
19
0.23
1.774
1-3/8 - 1-7/16
20
0.29
2.084
1-1/2 - 1-11/16
18
0.35
2.411
1-3/4 - 2
17
0.41
2.709
2-3/16
19
0.41
3.014
2-1/4 - 2-1/2
21
0.41
3.337
2-11/16 - 3
24
0.41
3.900
3-3/16 - 3-1/2
26
0.46
4.780
3-15/16 - 4
26
0.51
5.120
4-7/16 - 4-1/2
25
0.59
5.727
4-15/16 - 5
25
0.68
6.568
5-7/16 - 6
32
0.67
8.444
6-7/16 - 7
27
0.93
9.791
Cup Frequency = N * RPM * (1 - (Bd * cos a / Pd)) / 120
Cone Frequency = N * RPM * (1 + (Bd * cos a / Pd)) / 120
Roller Spin Frequency = Pd * RPM * (1 - (Bd * cos a / Pd) ^2) / (120 * Bd)
Cage Frequency = RPM * (1 - (Bd * cos a / Pd)) /120
Bore Size
Plummer Blocks
Table 2: Type E, K, DI, and TAF Tapered Roller Bearing Parameters For Vibration Analysis (1-RPS)
Sleeve Bearings
ENGINEERING
Contact
Angle
14.92
11.50
15.00
16.83
18.00
16.50
16.50
16.50
16.42
18.98
11.50
18.00
Cup
Frequency
Hz
8.236
9.236
9.769
9.295
11.322
10.261
11.759
9.742
10.767
11.282
14.108
11.796
Cone
* Roller Spin
Frequency
Frequency
Hz
Hz
10.764
3.566
11.764
4.010
12.231
4.261
11.705
4.114
13.678
5.002
12.739
4.399
14.241
4.978
12.258
4.138
13.233
4.618
13.718
4.807
18.892
3.308
14.204
5.091
Pd = Pitch Diameter
Keyword Index
* Note: Ball and Roller Spin Frequencies are listed at one (1X) roller spin frequency. For thorough analysis it is important to check frequency level at two
(2X) rotational speed of balls or rollers as this is the frequency that a single ball/roller defect will contact the raceways of the bearing. In other words, a
ball/roller defect will strike both inner and outer ring in one revolution of the roller.
Cage
Frequency
Hz
0.433
0.440
0.444
0.443
0.453
0.446
0.452
0.443
0.449
0.4513
0.428
0.4537
Engineering
# Rollers
Per Row
Part Number Index
Mean
Pitch
Diameter
Diameter
of Rollers
1-3/16 - 1-7/16
19
0.31
2.251
1-1/2 - 1-3/4
21
0.32
2.604
1-15/16
22
0.33
2.848
2 - 2-1/4
21
0.40
3.335
2-3/16 - 2-7/16
25
0.35
3.533
2-1/2 - 2-11/16
23
0.43
3.827
2-7/16 - 2-15/16
26
0.42
4.220
3 - 3-3/16
22
0.55
4.612
3-1/4 - 3-7/16
24
0.51
4.761
3-1/2 - 4
25
0.59
5.727
4-7/16 - 4-1/2
33
0.46
3.109
4-15/16 - 5
26
0.68
6.983
Cage Frequency = RPM * (1 - (Bd * cos a / Pd)) /120
Bore Size
Take-Up Frames
Table 3: Type C Tapered Roller Bearing Parameters For Vibration Analysis (1-RPS)
B20-3
Plummer Blocks
ENGINEERING
Type 4: Special Duty Tapered Roller Bearing Parameters For Vibration Analysis (1-RPS)
Sleeve Bearings
SLEEVOIL
Bore Size
1-3/8 - 1-1/2
1-9/16 - 1-3/4
1-7/8 - 2
2-1/8 - 2-1/4
2-3/8 - 2-1/2
2-5/8 - 3
3-3/16 - 3-1/2
3-11/16 - 4
4-7/16 - 4-1/2
4-15/16 - 5
5-7/16 - 6
6-1/2 - 7
7-15/16 - 8
8-1/2 - 10
11 - 12
# Rollers
Per Row
21
26
27
25
29
26
27
23
26
30
24
29
27
41
37
Mean
Diameter
of Rollers
0.32
0.32
0.32
0.35
0.35
0.48
0.56
0.68
0.68
0.75
0.93
0.93
1.12
0.87
1.20
Pitch
Diameter
2.603
3.061
3.267
3.533
3.828
4.572
5.541
6.103
6.983
7.896
9.123
10.190
11.471
13.979
16.061
Contact
Angle
11.50
16.00
17.00
18.00
18.77
10.17
16.00
15.88
18.00
17.00
17.33
19.23
12.42
16.40
12.50
Cup
Frequency
Hz
9.2384
11.6930
12.2349
11.3174
13.2454
11.6498
12.1840
10.2627
11.7910
13.6369
10.8322
13.2505
12.2127
19.2761
17.1505

Cage Frequency = RPM * (1 - (Bd * cos a / Pd)) / 2
Cone
Frequency
Hz
11.7616
14.3070
14.7651
13.6826
15.7546
14.3502
14.8160
12.7373
14.2090
16.3631
13.1678
15.7495
14.7873
21.7239
19.8495
Roller Spin
Frequency
Hz
4.0188
4.7323
5.0578
4.9813
5.4304
4.6873
4.8838
4.4180
5.0689
5.2181
4.8584
5.4378
5.0744
8.0053
6.6565
Cage
Frequency
Hz
0.4399
0.4497
0.4531
0.4527
0.4567
0.4481
0.4513
0.4462
0.4535
0.4546
0.4513
0.4569
0.4523
0.4701
0.4635
Pd = Pitch Diameter
Table 5: All Steel Tapered Roller Bearing Parameters For Vibration Analysis (1-RPS
Take-Up Frames
Engineering
Bore Size
# Rollers
Per Row
2-11/16 - 3
3-1/4 - 3-1/2
3-15/16 - 4
4-7/16 - 4-1/2
4-15/16 - 5
5-7/16
5-15/16 - 6
6-7/16 - 7
7-1/2 - 8
9 - 10
27
26
33
29
32
27
26
32
27
32
Mean
Diameter
of Rollers
0.36
0.51
0.48
0.60
0.61
0.84
0.85
0.81
1.12
1.28
Pitch
Diameter
Contact
Angle
4.114
5.120
5.814
6.503
7.355
8.272
8.323
9.748
11.471
14.026
15.50
17.57
12.50
12.92
12.50
12.00
12.00
12.50
12.42
12.03

Cup
Frequency
Hz
12.362
11.766
15.170
13.196
14.705
12.159
11.701
14.702
12.213
14.572
Cone
Frequency
Hz
14.638
14.235
17.830
15.804
17.296
14.841
14.300
17.300
14.787
17.428
* Roller Spin
Frequency
Hz
5.673
4.974
6.017
5.375
5.989
4.875
4.847
5.978
5.074
5.435
Cage
Frequency
Hz
0.458
0.453
0.460
0.455
0.460
0.450
0.450
0.459
0.452
0.455
Pd = Pitch Diameter
Part Number Index
* Note: Ball and Roller Spin Frequencies are listed at one (1X) roller spin frequency. For thorough analysis it is important to check frequency level at two (2X) rotational speed of balls or
rollers as this is the frequency that a single ball/roller defect will contact the raceways of the bearing. In other words, a ball/roller defect will strike both inner and outer ring in one revolution
of the roller.
Keyword Index
B20-4
No. of
Rollers
Mean Dia.
Of Rollers
Pitch Dia.
Contact
Angle
1-3/8 - 1-1/2
1-7/16 - 1-1/2
1-11/16 - 1-3/4 1-11/16 - 1-3/4
1-15/16 - 2
1-15/16 - 2
2-3/16
2-3/16
2-7/16
2-7/16 - 2-1/2
2-11/16 - 3
2-11/16 - 3
3-7/16
3-7/16 - 3-1/2
3-15/16 - 4
3-15/16 - 4
4-7/16
4-15/16
1-1/8 - 1-1/2
1-5/8 - 1-3/4
1-7/8 - 2
2-3/16 - 2-1/4
2-3/8 - 2-1/2
2-11/16 - 3
3-3/16 - 3-1/2
3-11/16 - 4
4-7/16 - 4-1/2
4-15/16 - 5
5-7/16 - 5-1/2
5-15/16 - 6
6-7/16 - 7
15
17
18
19
18
20
18
18
17
18
18
18
18
0.449
0.429
0.433
0.465
0.583
0.575
0.780
0.878
1.020
1.118
1.217
1.409
1.559
2.449
2.665
2.858
3.189
3.795
4.197
5.079
5.705
6.287
7.307
7.933
9.189
10.157
10.583
9.750
9.083
8.750
9.083
8.250
8.833
9.000
9.417
9.750
9.583
9.667
9.417
Outer Ring Inner Ring * Roller Spin

Cage
Frequency Frequency Frequency Frequency
Hz
Hz
Hz
Hz
6.149
8.851
2.640
0.410
7.151
9.849
3.027
0.421
7.653
10.347
3.226
0.425
8.132
10.868
3.361
0.428
7.635
10.365
3.182
0.424
8.645
11.355
3.584
0.432
7.635
10.365
3.183
0.424
7.632
10.368
3.174
0.424
7.140
9.860
3.004
0.420
7.643
10.357
3.193
0.425
7.639
10.361
3.186
0.424
7.639
10.361
3.185
0.424
7.637
10.363
3.183
0.424
SLEEVOIL
Imperial Bore
Size (in)
Table 7: USAF and SAF-XT Spherical Roller Bearing Parameters for Vibration Analysis (1-RPS)
Basic
Bearing
Series
22209
22210
22211
22213
22215
22216
22217
22218
22220
22222
22224
22226
22228
22230
22232
22234
22236
22238
22240
22244
23048
23052
23056
USAF/SAF-XT
No. Of Rollers
Bore Sizes (in)
1-7/16
1-11/16
1-15/16
2-3/16
2-7/16 - 2-1/2
2-11/16 - 2-3/4
2-15/16 - 3
3-3/16
3-7/16 - 3-1/2
3-15/16 - 4
4-3/16
4-7/16 - 4-1/2
4-15/16 - 5
5-3/16
5-7/16 - 5-1/2
5-15/16 - 6
6-7/16 - 6-1/2
6-15/16 - 7
7-3/16
7-1/2 - 8
8-7/16 - 9
9-7/16 - 9-1/2
9-15/16 - 10-1/2
18
19
19
20
20
20
20
20
19
18
19
19
18
18
18
17
18
20
19
19
29
27
28
Mean Dia. Of
Rollers
Pitch Dia.
Contact Angle
Outer Ring
Frequency Hz
Inner Ring
Frequency Hz
0.408
0.415
0.465
0.534
0.587
0.622
0.679
0.702
0.823
0.979
0.999
1.071
1.217
1.315
1.409
1.583
1.559
1.496
1.614
1.850
1.142
1.378
1.378
2.626
2.819
3.097
3.761
4.093
4.410
4.723
5.024
5.609
6.185
6.700
7.205
7.933
8.559
9.189
9.740
10.157
10.669
11.021
12.480
12.008
13.228
13.976
9.633
8.917
8.833
9.117
8.433
8.333
8.367
8.917
8.917
9.583
9.633
9.950
9.583
9.500
9.667
9.833
9.417
10.667
10.833
10.833
9.333
9.667
9.333
7.623
8.120
8.092
8.599
8.582
8.604
8.578
8.620
8.123
7.595
8.103
8.109
7.639
7.636
7.639
7.139
7.637
8.622
8.133
8.117
13.140
12.114
12.638
10.377
10.880
10.908
11.401
11.418
11.396
11.422
11.380
10.877
10.405
10.897
10.891
10.361
10.364
10.361
9.861
10.363
11.378
10.867
10.883
15.860
14.886
15.362
* Roller Spin Cage Frequency

Frequency Hz
Hz
3.147
3.328
3.260
3.456
3.419
3.475
3.409
3.510
3.336
3.082
3.280
3.292
3.186
3.180
3.185
2.998
3.183
3.498
3.343
3.301
5.213
4.749
5.023
0.424
0.427
0.426
0.430
0.429
0.430
0.429
0.431
0.428
0.422
0.426
0.427
0.424
0.424
0.424
0.420
0.424
0.431
0.428
0.427
0.453
0.449
0.451
Keyword Index

rollers as this is the frequency that a single ball/roller defect will contact the raceways of the bearing. In other words, a ball/roller defect will strike both inner and outer ring in one

revolution of the roller.
Take-Up Frames
UNISPHERE II
Bore Size (in)
Engineering
S-2000 Bore
Size (in)
Part Number Index
Basic
Bearing
Series
22208
22209
22210
22211
22213
22215
22218
22220
22222
22226
22228
22232
22236
Plummer Blocks
Table 6: S-2000, UNISPHERE II and Imperial Spherical Roller Bearing Parameters for Vibration Analysis (1-RPS)
Sleeve Bearings
ENGINEERING
B20-5
Plummer Blocks
ENGINEERING
Table 8: DODGE USAF Air Handling Spherical Roller Bearing Parameters For Vibration Analysis (1-RPS)
Sleeve Bearings
SLEEVOIL
Basic
#
Diameter
Bearing
Rollers
of
Bore Size
Series
Per Row
Rollers
1-7/16
22209E1K
17
0.3937
1-11/16
22210E1K
19
0.3937
1-15/16
22211E1K
18
0.4528
2-3/16
22213E1K
19
0.5315
2-7/16 - 2-1/2
22215E1K
21
0.5315
2-11/16 - 2-3/4
22216E1K
20
0.5709
2-15/16 - 3
22217E1K
20
0.6299
3-3/16
22218E1K
20
0.6693
3-7/16 - 3-1/2
22220E1K
19
0.7677
3-15/16 - 4
22222E1K
19
0.8661
4-3/16
22224E1K
19
0.9252
4-7/16 - 4-1/2
22226E1K
19
0.9843
4-15/16 - 5
22228E1K
19
1.0630
Outer Ring Frequency = N * RPM * (1 - (Bd * cos a / Pd)) / 120
Inner Ring Frequency = N * RPM * (1 + (Bd * cos a / Pd)) / 120
Pitch
Diameter
2.5976
2.7976
3.0921
3.7110
4.1098
4.3638
4.6811
4.9602
5.5606
6.1559
6.6382
7.1358
7.7232
Contact
Angle
10.0000
9.2500
8.9200
9.2500
8.3300
8.2500
8.5000
8.8300
9.0000
9.4200
9.5800
9.9200
9.6700
Outer
Ring
Frequency
Hz
7.231
8.180
7.698
8.157
9.156
8.705
8.669
8.667
8.205
8.181
8.194
8.209
8.211
Inner
*Roller
Ring
Spin
Frequency
Frequency
Hz
Hz
9.769
3.226
10.820
3.484
10.302
3.343
10.843
3.421
11.846
3.803
11.295
3.758
11.331
3.650
11.333
3.640
10.795
3.554
10.819
3.485
10.806
3.520
10.791
3.558
10.789
3.566
Pd = Pitch Diameter
a = Contact Angle
Cage
Frequency
Hz
0.425
0.431
0.428
0.429
0.436
0.435
0.434
0.433
0.432
0.431
0.431
0.432
0.432
Table 9: Split-Spherical Roller Bearing Parameters For Vibration Analysis

Take-Up Frames
Engineering
Part Number Index
Bore
Size
2-3/16
2-7/16
2-11/16
2-15/16
3-3/16
3-7/16
3-15/16 - 4
4-3/16
4-7/16 - 4-1/2
4-15/16
5-3/16
5-7/16
5-15/16 - 6
6-7/16 - 6-1/2
6-15/16 - 7
7-3/16
7-1/2 - 8
8-1/2 - 9
9-1/2
10
Basic
Bearing
Series
22213SS
22215SS
22216SS
22217SS
22218SS
22220SS
22222SS
22224SS
22226SS
22228SS
22230SS
22232SS
22234SS
22236SS
22238SS
22240SS
22244SS
23048SS
23052SS
23056SS
#
Rollers
Per Row
17
18
19
20
19
18
18
17
18
18
18
18
18
18
18
16
16
20
22
20
Diameter
Of Rollers
0.559
0.551
0.579
0.575
0.654
0.780
0.878
1.110
1.047
1.118
1.217
1.315
1.409
1.409
1.559
1.579
1.752
1.307
1.339
1.539
Pitch
Diameter
3.414
3.748
3.950
4.153
4.435
5.079
5.634
6.203
6.727
7.202
7.822
8.442
9.059
9.059
10.021
10.716
11.257
11.189
11.949
13.175
Contact
Angle
9.000
9.083
8.667
8.250
8.167
8.833
9.000
9.417
9.417
9.750
9.583
9.500
9.667
9.667
9.417
9.417
9.500
8.083
8.417
8.667

0Inner Ring Frequency = N * RPM * (1 + (Bd * cos a / Pd)) / 120
Outer Ring
Frequency
Hz
7.125
7.693
8.124
8.630
8.114
7.635
7.615
7.000
7.618
7.623
7.620
7.617
7.620
7.620
7.619
6.837
6.772
8.843
9.781
8.845
Inner Ring
Frequency
Hz
9.875
10.307
10.876
11.370
10.886
10.365
10.385
10.000
10.382
10.377
10.380
10.383
10.380
10.380
10.381
9.163
9.228
11.157
12.219
11.155
*Roller Spin
Frequency
Hz
2.973
3.328
3.341
3.545
3.321
3.183
3.132
2.708
3.136
3.145
3.139
3.134
3.138
3.138
3.138
3.322
3.137
4.223
4.408
4.222
Cage
Frequency
Hz
0.419
0.427
0.428
0.431
0.427
0.424
0.423
0.412
0.423
0.424
0.423
0.423
0.423
0.423
0.423
0.427
0.423
0.442
0.445
0.442
Pd = Pitch Diameter
a = Contact Angle


Keyword Index
B20-6
* Roller
Spin
Frequency
Hz
4.732
4.983
4.860
5.089
5.320
5.091
5.296
Cage
Frequency
Hz
0.448
0.451
0.450
0.452
0.454
0.452
0.454
13.914
14.711
15.923
17.044
18.272
19.077
19.833
12.500
12.000
12.333
12.833
12.833
12.333
12.000
10.134
10.618
10.167
10.127
10.123
10.621
11.068
12.866
13.382
12.834
12.873
12.877
13.379
13.932
4.051
4.191
4.156
4.025
4.013
4.195
4.213
0.441
0.442
0.442
0.440
0.440
0.443
0.443
13.523
14.745
15.537
16.706
17.878
19.048
14.000
14.000
13.583
13.833
14.000
14.167
8.616
8.171
8.670
8.650
8.675
8.657
3.438
3.400
3.590
3.530
3.598
3.545
0.431
0.430
0.434
0.433
0.434
0.433
Bore
Size
10-15/16 - 11
11-7/16 - 12
12-7/16 - 12-1/2
12-15/16 - 13-1/2
13-15/16 - 14
15
15-3/4
Diameter
of
Rollers
1.575
1.575
1.732
1.732
1.732
1.929
1.929
Pitch
Diameter
15.066
15.850
17.007
17.793
18.587
19.822
20.609
9-7/16 - 9-1/2
10-7/16 - 10-1/2
10-15/16 - 11
11-15/16 - 12
12-7/16 - 12-1/2
13-7/16 - 13-1/2
13-15/16 - 14
23152K
23156K
23160K
23164K
23168K
23172K
23176K
23
24
23
23
23
24
25
1.693
1.732
1.89
2.087
2.244
2.244
2.323
8-15/16 - 9
23248K
20
1.929
9-7/16 - 9-1/2
23252K
19
2.126
10-7/16 - 10-1/2
23256K
20
2.126
10-15/16 - 11
23260K
20
2.323
11-15/16 - 12
23264K
20
2.441
12-7/16 - 12-1/2
23268K
20
2.638
Inner Ring Frequency = N * RPM * (1 + (Bd * cos a / Pd)) / 120
11.384
10.829
11.330
11.350
11.325
11.343
Pd = Pitch Diameter
a = Contact Angle
Keyword Index
Part Number Index
Engineering


Plummer Blocks
Inner
Ring
Frequency
Hz
14.892
15.373
14.856
15.345
16.381
15.893
16.387
#
Rollers
Per Row
27
28
27
28
30
29
30
Sleeve Bearings
Contact
Angle
9.500
9.333
9.500
9.333
9.000
9.167
9.000
Outer
Ring
Frequency
Hz
12.108
12.627
12.144
12.655
13.620
13.107
13.613
Basic
Bearing
Series
23060K
23064K
23068K
23072K
23076K
23080K
23084K
SLEEVOIL
Table 10: USDAF Spherical Roller Bearing Parameters For Vibration Analysis (1-RPS)
Take-Up Frames
ENGINEERING
B20-7
Plummer Blocks
ENGINEERING
Mounted Bearings Life Adjustment Factor
1.1 GENERAL. For certain applications, it is desirable to specify
life for reliability other than 90%. In such cases a life adjustment
factor for reliability may be applied to the RATING LIFE. Section
1.2 discusses life adjustment factors for reliability.
Table 11: Life Adjustment Factors For Reliability

Reliability
%
Sleeve Bearings
Some bearing steels; e.g., vacuum-melted steels, and improved

processing techniques, permit manufacture of bearings which
offer endurance greater than that calculated by the RATING LIFE
formula. Section 1.3 recommends methods to incorporate life
adjustment factors for bearing materials into the life formula.
SLEEVOIL
Bearing life calculated according to the RATING LIFE formula

assumes proper application conditions. If lubrication is not
adequate, loading unusual, or temperatures extreme, the ability
of the bearing to attain or exceed the RATING LIFE is seriously
impaired. Section 1.4 contains some basic recommendations
concerning the effect of unusual application conditions on
bearing life.
Take-Up Frames
1.2 LIFE ADJUSTMENT FACTOR FOR RELIABILITY. Bearing

life estimated in accordance with this standard is RATING LIFE;
i.e., the life associated With 90% reliability or the life which 90%
of a group of apparently identical bearings in a given application
under similar conditions of load and speed will complete or
exceed. While RATING LIFE has proven useful over a period of
years as a criterion of performance, some applications require
definition of life at reliabilities greater than 90%.
To determine bearing life with reliabilities other than 90% (as
previously calculated in the Selection Procedure) the L10 must
be adjusted by factor a1, such that Ln=a1 x L10.
90
95
96
97
98
99
Life Adjustment
Factor for
Reliability a1
Ln
L10
L5
L4
L3
L2
L1
( )
Rating
Life
1
0.62
0.53
0.44
0.33
0.21
1.3 LIFE ADJUSTMENT FACTOR FOR MATERIAL. For

bearings, which incorporate improved materials and processing,
the L10 (as previously calculated in the Selection Procedure)
must be adjusted by factor a2. Factor a2 depends upon steel
analysis, metallurgical processing, forming methods, heat
treatment and manufacturing methods in general.
Bearings fabricated from consumable vacuum remelted steels
and certain other special analysis steels have demonstrated
extraordinarily long endurance. These steels are of exceptionally
high quality, and bearings fabricated from these are usually
considered special manufacture. As such, a2 values will not be
specified for such steels in this discussion. Generally, a2 values
for such steels can be obtained from the bearing manufacturer.
The life adjustment factors for reliability from Table11 are

recommended.
Engineering
Part Number Index
Keyword Index
B20-8
Mounted Bearings Life Adjustment Factor

1.4 LIFE ADJUSTMENT FACTOR FOR APPLICATION
CONDITIONS. Application conditions which affect bearing life
include:
1.5 FACTOR COMBINATIONS. A fatigue life formula including

the life adjustment factors is:
Plummer Blocks
ENGINEERING
Ball Bearings:
2. Load distribution (including effects of clearance,

misalignment, housing, and shaft stiffness, type of loading
and thermal gradients).
Ln = a1 x a2 x a3
b) Lubricant viscosity less than 20.4 centistokes

(100 SUS) at operating temperature.
c)

Excessively high operating temperatures.

When a3 is less than 1, it may not be assumed
that the deficiency in lubrication can be overcome
by using an improved steel.
(16.667)
RPM
Tapered Roller Bearings:

Ln = a1 x a2 x a3
10/3
( )
C90*
P
(1,500,000)
RPM
Ln = a1 x a2 x a3
10/3
( )
C*
P
(16.667)
RPM
Indiscriminate application of the life adjustment factors in

this formula may lead to serious over-estimation of bearing
endurance, since fatigue life is only one criterion for bearing
selection.
Care must be exercised to select bearings which are of sufficient
size for the application. Undersizing of shaft and housing
structures by using bearings which appear adequate from a
life standpoint could lead to misalignment and fitting problems
which could invalidate the formulas in this discussion.
Keyword Index
Part Number Index
* C = Basic Load Rating computed in accordance with ABMA-ANSI Standards. C90 = C x .259
SLEEVOIL
Spherical Roller Bearings:
Take-Up Frames
a) Exceptionally low values of Ndm (rpm times bore

diameter in mm); e.g., Ndm 1000.
C* 3
Engineering
3. Temperature.
Consideration of (1.2) and (1.3) above requires analytical and
experimental techniques beyond the scope of this discussion,
therefore, the user should consult the bearing manufacturer
for evaluations and recommendations.
In most bearing applications, lubrication serves to separate
the rolling surfaces; i.e., rolling elements and raceways; to
reduce retainer-rolling elements and retainer-land friction
and sometimes to act as a coolant to remove frictional heat
generated by the bearing.
If all limitations and qualifications specified by this discussion
are observed, then the life adjustment application factor for
bearings which are adequately lubricated is 1; i.e., a3=1.
Operating conditions where a3 might be less than 1 include:
( )
Sleeve Bearings
1. Lubrication.
B20-9
Plummer Blocks
ENGINEERING
V-Belt Drive Formulas
V-belt tensioning In cases where tensioning of a drive effects belt pull and bearing loads, the following
formulas may be used.
( HP)
Sleeve Bearings
SLEEVOIL
T1-T2
where: T1
T2
HP
V
=
=
=
=
=
33,000 V
tight side tension, pounds
slack side tension, pounds
design horsepower
belt speed, feet per minute
T1 + T2
where: T1
T2
HP
V
G
=
=
=
=
=
=
33,000 (2.5-G) GV
design horsepower
arc of contact correction factor*
T1/T2
where: T1
T2
G
e
K
=
=
=
=
=
=
=
where:
( HP )
where:
(Also T1/T2 = eK)

arc of contact correction factor*
base of natural logarithms
.51230, a constant for V-belt drive design
arc of contact in radians
Take-Up Frames
.00
.10
.20
.30
.40
.50
.60
.70
Factor
G
D-d
C
1.00
.99
.97
.96
.94
.93
.91
.89
.80
.90
1.00
1.10
1.20
1.30
1.40
1.50
41,250 (HP/GV)
design horsepower
arc of contact correction factor
T2
T2
HP
V
G
=
=
=
=
=
33,000 (1.25-G) (HP/GV)

design horsepower
arc of contact correction factor
(PD) (RPM)
= (PD) (rpm) (.262)
3.82
pitch diameter of sheave or pulley
revolutions per minute of the same sheave or pulley
* See Table 12 at left
Table 12: Arc of Contact Correction Factor G

D-d
C
=
=
=
=
=
Belt Speed
V =
where:
V =
PD =
rpm =
1
1-0.8G
Small
Sheave
Arc of
Contact
180
174
169
163
157
151
145
139
T1
T1
HP
V
G
Small
Sheave
Arc of
Contact
133
127
120
130
106
99
91
83
Table 13: Allowable Sheave Rim Speed

Factor
G
.87
.85
.82
.80
.77
.73
.70
.65
Engineering
D = Diam. of large sheave. d = Diam. of small sheave

C = Center distance
Rim Speed in Feet

per Minute
6,500
8,000
10,000
Sheave Material
Cast Iron
Ductile Iron
Steel
NOTE: Above rim speed values are maximum for normal

considerations. In some cases these values may be exceeded.

Consult factory and include complete details of proposed
application.
Dynamic balance RPM
for Sheave/Sprocket
15600
Dia x Face Width
Note: MPTA recommends Dynamic balance when application RPM

exceeds this value.
Bearing Load Calculations
To find actual bearing loads, it is necessary to know machine component

weights and values of all other forces contributing to the load. Sometimes
it becomes desirable to know the bearing load imposed by the V-belt drive
Part Number Index
alone. This can be done if you know bearing spacing with respect to the
sheave center and shaft load and apply it to the following formulas:
SHEAVE
BEARING
LOAD
C
BEARING
LOAD SHAFT
LOAD
B
Keyword Index
Load at B, lbs. = Shaft Load x (a + b)

a
b
a
Where: a and b = Spacing, inches
SHAFT BEARING
LOAD
LOAD
D
Sheave Between Bearings
Overhung Sheave
Load at A, lbs = Shaft Load x
SHEAVE
SHAFT
SHAFT
BEARING
LOAD
A
Load at D, lbs. =
Shaft Load x c
c+d
Load at C, lbs =
Shaft Load x d
c+d
Where: c and d = Spacing, inches
B20-10
Nominal V-Belt Cross Sections

Table 14: Nominal V-Belt Cross Sections
Belt Section
3L
4L
5L
3V
5V
8V
A
B
C
D
Industry Standard
Description
FHP, Single
Narrow
Thickness T,
in Inches
7/32
5/16
3/8
5/16
17/32
29/32
5/16
13/32
17/32
3/4
Pulley
Dia. Inches
6
8
10
12
14
16
18
20
24
30
36
42
48
54
60
100
64
48
38
32
27
24
21
19
16
13
11
9
8
7
6
150
95
72
57
48
41
36
32
29
24
19
16
14
12
11
10
200
127
95
76
64
55
48
42
38
32
25
21
18
16
14
13
250
159
119
95
80
68
60
53
48
40
32
27
23
20
18
16
300
191
143
115
95
82
72
64
57
48
38
32
27
24
21
19
350
223
167
134
111
95
83
74
67
56
45
37
32
28
25
22
FPM
400
254
191
153
127
109
95
85
76
64
51
42
36
32
28
25
500
318
239
191
159
136
119
106
95
80
64
53
45
40
35
32
600
382
286
229
191
164
143
127
115
95
76
64
55
48
42
38
700
445
334
267
223
191
167
148
134
111
89
74
64
56
49
45
800
509
382
305
254
218
191
170
153
127
102
85
73
64
57
51
900
573
429
344
286
245
215
191
172
143
115
95
82
72
64
57
1000
636
477
382
318
273
239
212
191
159
127
106
91
80
71
64
Engineering
Table 15: Maximum Pulley RPM*
Take-Up Frames
SLEEVOIL
Classical
Multiple
Width W,
in Inches
3/8
1/2
21/32
3/8
5/8
1
1/2
21/32
7/8
1-1/4
Sleeve Bearings
Plummer Blocks
ENGINEERING
Part Number Index
* Maximum RPM values shown are based on 6,500 feet per minute for standard cast iron products. For higher rim speeds, contact Dodge Technical Support at 1-864-284-5700
For values not shown use formula below:
6,500
.2618 x D
D = Pulley Diameter, Inches
Keyword Index
Max RPM =
B20-11
Plummer Blocks
ENGINEERING
Table 16: Material Characteristics
MATERIAL
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
Alfalfa, Ground
Alum, Lumpy
Alum, Pulverized
Alumina
Aluminum Oxide
Ammonium Sulphate
Asbestos, Shredded
Ashes, Dry
Ashes, Wet
Ashes, Soft Coal
Asphalt, Crushed
Bagasse
Bakelite, Powder
Baking Powder
Bark, Wood Refuse
Barley
Basalt
Bauxite, Crushed
Beans, Castor, Whole
Beans, Cocoa
Beans, Navy
Beans, Whole
Bentonite, Crude
Bentonite, Fine
Bones, Pulverized
Borax, Fine
Borax Coarse
Bran
Brewers Grain, Dry
Brewers Grain, Wet
Buck Wheat
Calcium, Carbide
Carbon Black, Pellets
Carbon Black, Powder
Cast Iron Chips
Cement, Clinker
Cement, Portland
Chalk, Fine
Chalk, Lumpy
Charcoal, Wood
Chromium Ore
Cinders, Coal
Clay, Dry, Fine
Clay, Dry, Lumpy
Coal, Anthracite, Coarse
Coal, Anthracite, Loose
Coal, Bituminous, Coarse
Coal, Bituminous, Loose
Cocoa Nibs
Coconut, Shredded
Coffee, Fresh Beans
Coffee, Roasted Beans
Coke, Loose
Coke Pulverized
Coke, Petroleum Calcinated
Concrete, Cinder
Concrete, Gravel & Sand
Copper Ore
Copper Sulfate
Cork, Ground
Corn, On Cob
DENSITY
(LB/fT3)
16
50 - 60
45 - 50
60
70 - 120
45 - 60
20 - 25
35 - 40
45 - 50
35 - 45
45
7.50
30 - 40
40 - 50
10 - 20
38
80 - 120
75 - 85
30 - 45
30 - 45
50
45
35 - 40
50 - 60
50 - 60
50 - 55
60 - 70
16
25 - 35
55 - 60
40
70 - 80
25
5
100 -120
75 - 90
80 -100
65 - 75
80 - 95
15 - 30
125 - 140
40
100 - 120
60 - 75
60 - 70
50 - 60
50 - 60
45 - 50
35 - 40
20 - 25
30 - 40
22 - 30
23 - 32
25 - 35
35 - 45
112
150
120 - 150
75 - 85
5 - 15
45
ANGLE OF
REPOSE
(DEG)
45
35
35
30
30
45
45
45
45
40
35
45
45
35
45
25
25
35
25
35
25
45
45
45
45
35
35
35
45
45
25
35
25
35
45
35
35
45
45
35
35
35
35
35
35
30
35
35
35
45
35
25
35
45
35
0
0
35
30
45
0
RECOMMENDED
MAXIMUM
INCLINATION
10-12
27
10-15
20
8-10
11-13
20-23
20-25
20
20-22
18-20
18
16
18
16
10-15
18
20-22
20
12-30
20
17
MATERIAL
Corn, Shelled
Corn Sugar
Corn Grits
Cornmeal
Cottonseed, Dry, De-Linted
Cottonseed, Dry, Not De-Linted
Cottonseed, Cake, Lumpy
Cottonseed, Hulls
Cottonseed, Meal
Cottonseed, Meats
Cryolite
Cullet
Diatomaceous Earth
Dolomite, Lumpy
Dolomite, Pulverized
Earth, Dry
Earth, Moist
Earth, Fullers Dry
Emery
Epsom Salt
Feldspar, Lumps
Feldspar, Dust
Fish, Meal
Fish, Scrap
Flaxseed, Whole
Flaxseed, Meal
Flour, Wheat
Flue Dust, Dry
Fluorspar, Dust
Fluorspar, Lumps
Foundry, Refuse
Foundry Sand, Loose
Foundry Sand, Rammed
Galena
Garbage, Average
Glass, Batch Fiber
Glass, Batch Wool
Glass, Broken
Glue, Animal, Flaked
Glue, Vegetable, Powdered
Gluten, Meal
Granite, Lumps
Graphite, Flakes
Graphite, Powder
Graphite, Ore
Grass Seed
Gravel, Dry
Gravel, Wet
Gypsum, Lumps
Gypsum, Ground
Hay, Loose
Hay, Pressed
Hominy
Hops, Spent, Dry
Hops, Spent, Wet
Ice, Crushed
Ilmenite Ore
Iron Ore
lron Ore, Pellets
Iron Sulphate
Iron Sulfide
B20-12
DENSITY
(LB/fT3)
45
30
40 - 45
32- 40
35
18- 25
40- 45
12
35- 40
40
90-110
80-120
11- 14
90-100
46
70- 80
75-110
30- 35
225
40- 50
70-100
80-100
35- 40
40- 50
45
25
35- 40
30- 40
85- 95
80-110
60- 80
80- 90
100-110
250
30
45 - 55
80-100
80-100
35
40
39
150 -170
40
30
65 - 75
10
90-100
100-120
90-100
75- 80
5
25
35- 50
25- 35
55- 60
35- 40
140-160
120-180
120-140
50- 75
120-140
ANGLE OF
REPOSE
(DEG)
25
35
35
35
35
45
35
45
35
35
35
35
35
35
40
35
40
23
25
35
35
40
40
0
25
35
45
20
45
45
35
35
0
35
25
10
35
10
25
35
35
25
35
25
35
35
35
35
35
35
0
0
35
45
45
2035
35
35
35
35
RECOMMENDED
MAXIMUM
INCLINATION
10
22
16
19
22
20
22
20
23
20
17
12
21
20-22
15-17
15
21
18-20
13-15
20
23
10
30
25
Rubber, Pellets
Rubber, Ground Scrap
Rye
Rye Meal
Salt Cake
Salt, Coarse
Salt, Fine
Sand, Wet
Sand, Dry
Sand, Loose, Foundry
Sand, Foundry, Rammed
Sandstone
Sawdust
Scale, Rolling Mill
Sewage Sludge, Dry
Sewage Sludge, Wet
Shale, Broken
Shale, Crushed
Silica Gel, Dry
Slag, Blast Furnace
Slag, Granular, Dry
Slag, Granular, Wet
Slate, Ground
Slate, Lumps
Snow, Compacted
Soap
Soda Ash, Briquettes
Soda Ash, Heavy
Soda Ash, Light
Sodium Aluminum, Ground
Sodium Nitrate, Ground
Sodium Phosphate
Soybeans, Cracked
Soybeans, Whole
Starch, Powdered
Steel, Chips
Steel, Turnings
Sugar, Cane, Raw
Sugar. Granulated, Dry
Sugar, Granulated, Wet
Sugar Cane, Knifed
Sulphur, Lumps
Sulphur, Dust
Saconite, Pellets
Salc, Granulated
Titanium Dioxide
Titanium Sponge
Tobacco, Leaves
Tobacco, Scraps
Tobacco, Stems
Traprock, Crushed
Traprock, Lumps
Turf
Walnut, Shells
Wheat
Wheat, Cracked
Wheat Germ, Dry
Wood Chips
Zinc Ore, Granular
Zinc Oxide
B20-13
DENSITY
(LB/fT3)
50 - 55
25 - 35
42 - 45
35 - 40
80 - 95
45 - 55
70 - 80
110 - 130
90 - 110
80 - 100
100 - 110
80 - 90
10 - 25
125 - 160
45 - 55
50 - 60
90 - 100
85 - 90
45
80 - 90
60 - 65
90 - 100
80 - 90
85 - 95
15 - 50
10 - 25
50
55 - 65
20 - 35
72
70 - 80
50 - 65
30 - 40
45 - 50
25 - 45
100 - 150
60 - 120
55 - 65
50 - 55
55 - 65
15 - 18
80 - 85
50 - 70
120 - 140
50 - 70
140
60 - 70
14
15 - 25
15
95 - 110
100 - 110
20 - 30
35 - 45
48
40 - 45
20 - 30
10 - 30
160
10 - 35
ANGLE OF
REPOSE
(DEG)
35
45
25
20
30
35
35
45
35
35
0
35
30
45
35
35
25
40
35
25
25
45
30
0
0
35
20
30
35
35
24
35
35
25
25
35
45
45
35
40
45
35
35
35
20
35
45
45
45
45
35
35
0
35
25
35
25
45
35
45
RECOMMENDED
MAXIMUM
INCLINATION
22
18
8
21
18-22
11
20-22
16-18
22
24
22
22
10
13-16
20-22
15
7
19
22
11
SLEEVOIL
23
21
17
20
18
MATERIAL
Take-Up Frames
RECOMMENDED
MAXIMUM
INCLINATION
19
15-18
12-16
12
18
Engineering
60
30
180 - 270
60 - 150
170 - 190
240 - 260
45 - 55
60 - 65
40
30 - 40
80 - 100
85 - 90
45 - 50
30 - 40
30 - 35
40 - 60
25 - 30
60 - 65
35 - 40
125 - 140
120
70
25
80 - 95
80
20
15
5
25 - 35
20 - 30
55 - 60
100 - 110
150
35
80 - 150
25 - 35
20
50
60
50 - 60
80
40 - 60
35 - 45
15 - 20
45 - 50
50 - 60
60 - 100
70 - 80
120 - 130
75 - 80
45
48
40 - 45
135 - 145
120 - 130
95 - 100
70 - 80
45 - 50
35
40 - 45
100 - 150
ANGLE OF
REPOSE
(DEG)
35
35
30
40
45
35
35
40
40
40
35
45
25
35
40
35
30
45
35
40
35
35
0
35
35
20
35
35
45
40
35
40
0
35
35
25
35
45
35
35
35
20
35
35
0
35
35
30
35
25
45
0
45
25
35
25
25
20
35
35
30
13-15
Part Number Index
Kaolin, Clay
Lactose
Lead Ore, Crushed
Lead Oxides
Lead Sulfate
Lead Sulfide
Lignite, Air Dried
Lime, Ground
Lime, Hydrated
Lime, Pebble
Limestone, Loose
Limestone, Pulverized
Linseed, Whole
Linseed, Meal
Magnesium Chloride
Magnesium Sulfate
Malt, Dry
Malt, Wet
Malt, Meal
Manganese Ore
Manganese Oxide
Manganese Sulfate
Manure
Marble, Crushed
Marl
Mica, Flakes
Mica, Ground
Milk, Dried, Flaked
Milk, Malted
Milk, Powdered
Milo Maize
Molybdenum Ore
Mortar, Wet
Niacin
Nickel-Cobalt Sulfate Ore
Oats
Oats, Rolled
Oil Cake
Oxalic Acid Crystals
Oyster Shells, Ground
Oyster Shells, Whole
Paper Pulp Stock
Peanuts, Shelled
Peanuts, Not Shelled
Peas, Dried
Phosphate, Fertilizer
Phosphate, Rock, Crushed
Potash
Potassium Chloride
Potassium Nitrate
Potassium Sulfate
Potatoes, White
Pumice, Ground
Pyrites, Lumps
Pyrites, Pellets
Quartz, Lumps
Quartz, Sand
Rice, Hulled
Rice, Rough
Rice, Grits
Rock, Crushed
DENSITY
(LB/fT3)
12
27
22
Keyword Index
MATERIAL
Plummer Blocks
Table 16: Material Characteristics (Continued)
Sleeve Bearings
ENGINEERING
Plummer Blocks
ENGINEERING
Shafting
Table 17: Typical Commercial Shaft Tolerances
Shaft Size
Sleeve Bearings
Up to 1-1/2
Over 1-1/2 to 2-1/2
Over 2-1/2 to 4
Over 4 to 6
Over 6 to 8
Over 8 to 9
Over 9
Plus
.000
.000
.000
.000
.000
.000
.000
Standard Shafting-Table17 indicates standard shafting is cold

drawn in the smaller sizes and turned and polished in the larger
diameters. It has a smooth surface, is commercially straight and
is readily machinable; suitable and recommended for general
power transmission and material handling service.
Minus
.002
.003
.004
.005
.006
.007
.008
Special Shafting-While standard shafting is suitable for most

installations, special shafting is sometimes required for certain
chemical, temperature or physical requirements. Such materials
as high carbon steel, alloy steel, stainless steel, brass, Monel
metal, etc., can be furnished plain or heat treated. Stepped,
flanged, hollow or other special forms are available.
Table 18: Shaft Tolerances
SLEEVOIL
Shaft Size
Tolerance, Inches
Up to 1-1/2
+.0000 -.0005
1-5/8 to 4
+.000 -.001
4-7/16 to 6
+.000 -.0015
6-7/16 to 8
+.000 -.002
Table 18 lists the recommended tolerances for all setscrew locking, eccentric locking and
D-LOK locking ball and roller bearings
Table 19: Shaft Tolerances
Take-Up Frames
Shaft Size
Tolerance, Inches
Up to 1-1/2
+.000 -.002
1-9/16 to 2-1/2
+.000 -.003
2-5/8 to 4
+.000 -.004
4-3/16 to 6
+.000 -.005
6-7/16 and above
+.000 -.006
Table 19 list the recommended tolerances for all tapered adapter sleeve ball and roller
bearings
Special shafting should be avoided in favor of standard

shafting wherever possible because special shafting is usually
considerably more expensive and requires a greater length of
time to obtain, which is an especially important consideration
should quick replacement ever become necessary.
Ordering Shafting-Standard shafting can be obtained
from most supply houses and dealers who handle power
transmission material.
Turning Down Shaft Ends-When necessary to turn down
shaft ends, use as large a fillet as possible to keep the stress
concentration to a minimum. The radius of this fillet should
preferably be not less than the difference in the two diameters
joined by the fillet. The fillet should be finished and polished
as smoothly as possible to avoid scratches which might start
cracks and lead to failure of the shaft by fatigue.
Engineering
Part Number Index
Keyword Index
B20-14
Selection of Shaft Diameters

not only reduce deflection and vibration but also generally
increase bearing life.
Table 20: No Bending Moment (Shafts without pulleys, sprockets or gears - Torsion only)
50
75
100
125
150
Horse Power at Various Revolutions per Minute

175
200
225
250
275
300
350
700
800
15/16
0.30
0.70
1.10
1.50
1.90
2.30
2.60
3.00
3.40
3.80
4.20
4.60
5.30
400
6.10
500
7.70
600
9.20
10.70
12.30
900
13.80
1-3/16
0.70
1.50
2.30
3.10
3.90
4.60
5.40
6.20
7.00
7.80
8.60
9.30
10.90
12.50
15.60
18.70
21.90
25.00
28.10
1-7/16
1.30
2.70
4.10
5.50
6.90
8.30
9.70
11.10
12.40
13.80
15.20
16.60
19.40
22.20
27.70
33.30
38.80
44.40
49.90
1-11/16
2.20
4.40
6.60
8.90
11.20
13.40
15.70
17.90
20.20
22.40
24.70
26.90
31.40
35.90
44.90
53.80
62.80
71.80
80.80
81.50
95.10 108.00 122.00
1-15/16
3.30
6.70
10.10
13.50
16.90
20.30
23.70
27.10
30.50
33.90
37.30
40.70
47.50
54.30
67.90
2-3/16
4.90
9.80
14.60
19.50
24.40
29.30
34.20
39.10
44.00
48.90
53.80
58.60
68.40
78.20
97.80 117.00 136.00 156.00 176.00
81.20
94.70 108.00 135.00 162.00 189.00 216.00 243.00
2-7/16
6.70
13.50
20.20
27.00
33.80
40.60
47.30
54.10
60.90
67.60
74.40
2-11/16
9.00
18.10
27.10
36.20
45.30
54.40
63.40
72.50
81.60
90.70
99.70 108.00 126.00 145.00 181.00 217.00 253.00 290.00 326.00
71.00
82.90
94.70 106.00 118.00 130.00 142.00 165.00 189.00 236.00 284.00 331.00 379.00 426.00
2-15/16
11.80
23.60
35.40
47.30
59.20
3-7/16
19.00
37.90
57.00
75.90
94.90 113.00 132.00 151.00 170.00 189.00 208.00 227.00 265.00 303.00 379.00 455.00 531.00 607.00 683.00
85.50 114.00 142.00 171.00 199.00 228.00 256.00 285.00 313.00 342.00 399.00 456.00 570.00 684.00 798.00 912.00 1026.00
3-15/16
28.50
57.00
4-7/16
40.80
81.60 122.00 163.00 204.00 245.00 286.00 327.00 367.00 408.00 449.00 490.00 572.00 653.00 816.00 980.00 1143.00 1306.00 1470.00
Table 21: Limited Bending Moment (Pulleys, sprockets or gears near bearings. Ordinary line shafts.)
Shaft
Size
.00

25
50
75
100
125
150
175
200
225
250
275
300
350
400
500
600
700
800
900
15/16
0.20
0.50
0.70
1.00
1.20
1.50
1.70
2.00
2.30
2.50
2.80
3.00
3.50
4.10
5.10
6.10
7.10
8.20
9.20
1-3/16
0.50
1.00
1.50
2.00
2.60
3.10
3.60
4.10
4.70
5.20
5.70
6.20
7.30
8.30
10.40
12.50
14.60
16.70
18.80
1-7/16
0.90
1.80
2.70
3.70
4.60
5.50
6.40
7.40
8.30
9.20
10.10
11.10
12.90
14.80
18.50
22.20
25.90
29.60
33.30
1-11/6
1.40
2.90
4.30
5.90
7.40
8.90
10.40
11.90
13.40
14.90
16.40
17.90
20.90
23.90
29.90
35.90
41.90
47.90
53.90
1-15/16
2.20
4.50
6.70
9.00
11.30
13.60
15.80
18.10
20.40
22.60
24.90
27.20
31.70
36.20
45.30
54.40
63.40
72.50
81.60
2-3/16
3.20
6.50
9.70
13.00
16.30
19.50
22.80
26.10
29.30
32.60
35.80
39.10
45.60
52.20
65.20
78.30
91.30 104.00 117.00
90.20 108.00 126.00 144.00 162.00
4.50
9.00
13.50
18.00
22.50
27.00
31.60
36.10
40.60
45.10
49.60
54.10
63.20
72.20
6.00
12.10
18.10
24.20
30.20
36.30
42.30
48.40
54.40
60.50
66.50
72.60
84.70
96.80 121.00 145.00 169.00 193.00 217.00
2-15/16
7.90
15.80
23.70
31.60
39.50
47.40
55.30
63.20
71.10
79.00
86.90
94.80 110.00 126.00 158.00 189.00 221.00 252.00 284.00
3-7/16
12.60
25.30
37.90
50.60
63.30
75.90
88.60 101.00 113.00 126.00 139.00 151.00 177.00 202.00 253.00 303.00 354.00 405.00 455.00
3-15/16
19.00
38.00
57.00
76.10
94.10 114.00 133.00 152.00 171.00 190.00 209.00 228.00 266.00 304.00 380.00 456.00 532.00 608.00 685.00
4-7/16
27.00
54.00
81.00 108.00 136.00 163.00 190.00 217.00 245.00 272.00 299.00 326.00 381.00 435.00 544.00 653.00 762.00 871.00 980.00
4-15/16
37.00
75.00 112.00 150.00 187.00 225.00 262.00 300.00 337.00 375.00 412.00 450.00 525.00 600.00 750.00 900.00 1050.00 1200.00 1350.00
5-7/16
50.00 100.00 150.00 200.00 250.00 300.00 350.00 400.00 451.00 501.00 551.00 601.00 701.00 801.00 1002.00 1202.00 1403.00 1603.00 1804.00
5-15/16
65.00 130.00 195.00 261.00 326.00 391.00 456.00 522.00 587.00 652.00 717.00 783.00 913.00 1044.00 1305.00 1566.00 1827.00 2088.00 2349.00
6-1/2
85.00 171.00 256.00 342.00 427.00 513.00 598.00 684.00 769.00 855.00 940.00 1026.00 1197.00 1368.00 1710.00 2052.00 2394.00 2736.00 3078.00
Keyword Index
2-7/16
2-11/16
SLEEVOIL
25
Take-Up Frames
Shaft Size
Engineering
Tables and chart are based upon a safe shear stress of 6,000
pounds per square inch for standard keyseated shafting. Be
generous in the selection of shaft diameters as liberal diameters
When necessary to use other than standard shafting, find the

required diameter for standard shafting as outlined above and
multiply by proper factor shown in Table25, under heading
Factors for Shafting Other than Standard Shafting, (B20-16).
Part Number Index
Tables21 - 24inclusive can be used to find approximate shaft

diameter for various service conditions For greater accuracy
use chart under heading Combined Torsion and Bending of
Standard Shafts (B20-17).
Sleeve Bearings
Plummer Blocks
ENGINEERING
B20-15
Plummer Blocks
ENGINEERING
Selection of Shaft Diameters (Continued)
Table 22: Heavy Bending Moment. (Use for main or important shafts.)
Shaft
Size
Sleeve Bearings
SLEEVOIL
Take-Up Frames
1-11/16
1-15/16
2-3/16
2-7/16
2-11/16
2-15/16
3-7/16
3-15/16
4-7/16
4-15/16
5-7/16
5-15/16
6-1/2
7
7-1/2
8
8-1/2
9
9-1/2
10
25
0.80
1.30
1.90
2.70
3.60
4.70
7.50
11.40
16.30
22.50
30.00
39.00
51.00
64.00
78.50
95.50
114
136
160
186
50
1.70
2.70
3.90
5.40
7.20
9.40
15.10
22.80
32.60
45.00
60.00
78.00
102
128
157
191
229
272
320
373
75
2.50
4.00
5.80
8.10
10.80
14.10
22.60
34.20
48.90
67.50
90.00
117
153
192
235
286
343
408
480
559
100
3.50
5.40
7.80
10.80
14.50
18.90
30.30
45.60
65.30
90.00
120
156
205
256
315
382
459
545
641
747
125
4.40
6.70
9.70
13.50
18.10
23.60
37.90
57.00
81.60
112
150
195
256
320
394
478
574
681
801
934
150
5.30
8.10
11.70
16.20
21.70
28.40
45.50
68.40
98.00
135
180
234
308
384
473
574
688
817
961
1121

175
200
225
250
275
300
350
6.20
7.10
8.00
8.90
9.80 10.70 12.50
9.50 10.80 12.20 13.50 14.90 16.30 19.00
13.70 15.60 17.60 19.50 21.50 23.40 27.40
18.90 21.60 24.30 27.00 29.70 32.40 37.90
25.40 29.00 32.60 36.20 39.90 43.50 50.80
33.10 37.90 42.60 47.30 52.10 56.80 66.30
53.10 60.70 68.30 75.90 83.50 91.10 106
79.90 91.30 102
114
125
136
159
114
130
147
163
179
196
228
157
180
202
225
247
270
315
210
240
270
300
330
360
420
273
313
352
391
430
469
547
359
410
462
513
564
616
718
448
513
577
641
705
769
897
552
631
709
788
867
946
1104
670
765
861
957
1053 1148 1340
803
918
1033 1148 1263 1377 1607
954
1090 1226 1363 1499 1635 1908
1122 1282 1442 1603 1763 1923 2244
1308 1495 1682 1869 2056 2243 2617
400
14.30
21.70
31.30
43.30
58.00
75.80
121
182
261
360
480
626
821
1026
1262
1531
1837
2181
2565
2991
500
17.90
27.10
39.10
54.10
72.50
94.70
151
228
326
450
601
782
1027
1282
1577
1914
2296
2726
3206
3739
600
21.50
32.60
46.90
64.90
87.10
113
182
273
392
540
721
939
1232
1539
1893
2297
2755
3271
3847
4487
700
25.10
38.00
54.80
75.80
101
132
212
319
457
630
841
1095
1437
1795
2208
2680
3215
3816
4488
5235
800
28.70
43.50
62.60
86.60
116
151
243
365
522
720
961
1252
1643
2052
2524
3063
3674
4362
5130
5983
900
32.30
48.90
70.40
97.40
130
170
273
410
588
810
1082
1409
1848
2308
2839
3446
4133
4907
5771
6731
Table 23: Severe Conditions (Heavy shock loads. Excessively tight belts, long clutch sleeves.)
Engineering
Part Number Index

25
50
75
100
125
150
175
200
225
250
275
300
350
400
500
600
700
800
900
1-11/16
0.4
0.89
1.20
1.70
2.20
2.60
3.10
3.50
4.00
4.40
4.90
5.30
6.20
7.10
8.90 10.70 12.50 14.30 16.10
1-15/16
0.6
1.39
2.00
2.70
3.30
4.00
4.70
5.40
6.10
6.70
7.40
8.10
9.50 10.80 13.50 16.30 19.00 21.70 24.40
2-3/16
0.90
1.90
2.90
3.90
4.80
5.80
6.80
7.80
8.80
9.70 10.70 11.70 13.70 15.60 19.50 23.40 27.40 31.30 35.20
2-7/16
1.30
2.70
4.00
5.40
6.70
8.10
9.40 10.80 12.10 13.50 14.80 16.20 18.90 21.60 27.00 32.40 37.90 43.30 48.70
2-11/16
1.80
3.60
5.40
7.20
9.00 10.80 12.70 14.50 16.30 18.10 19.90 21.70 25.40 29.00 36.20 43.50 50.50 58.00 65.00
2-15/16
2.30
4.70
7.00
9.40 11.80 14.20 16.50 18.90 21.30 23.60 26.00 28.40 33.10 37.90 47.30 56.50 66.00 75.50 85.00
3-7/16
3.70
7.50 11.30 15.10 18.90 22.70 26.50 30.30 34.10 37.90 41.70 45.50 53.00 60.50 75.50 91.00 106
121
136
3-15/16
5.70 11.40 17.10 22.80 28.50 34.20 39.90 45.60 51.00 57.00 62.50 68.00 79.50 91.00 114
136
159
182
205
4-7/16
8.10 16.30 24.40 32.60 40.80 49.00 57.00 65.00 73.50 81.50 89.50 98.00 114
130
163
196
228
261
294
4-15/16
11.20 22.50 33.70 45.00 56.00 67.50 78.50 90.00 101
112
123
135
157
180
225
270
315
360
405
5-7/16
15.00 30.00 45.00 60.00 75.00 90.00 105
120
135
150
165
180
210
240
300
360
420
480
541
5-15/16
19.50 39.00 58.50 78.00 97.10 117
136
156
171
195
215
234
273
313
391
469
547
626
704
6-1/2
25.50 51.00 76.50 102.5 128
154
179
205
231
256
282
308
359
410
513
616
718
821
924
7
32.00 64.90 96.00 128
160
192
224
256
288
320
352
384
448
513
641
769
897
1026 1154
7-1/2
39.20 78.50 117
157
197
236
276
315
354
394
433
473
552
631
788
946
1104 1262 1419
8
47.70 95.50 143
191
239
287
335
382
430
478
526
574
670
765
957
1148 1340 1531 1723
8-1/2
57.00 114
171
229
287
344
401
459
516
574
631
688
803
918
1148 1377 1607 1837 2066
817
954
1090 1363 1635 1908 2181 2453
9
68.00 136
204
272
340
408
477
545
613
681
749
9-1/2
80.00 160
240
320
400
480
561
641
721
801
881
961
1122 1282 1603 1923 2244 2565 2885
10
93.00 186
279
373
467
560
654
747
841
934
1028 1121 1308 1495 1869 2243 2617 2991 3365
Caution: Be generous in the selection of shaft diameters as liberal diameters not only reduce deflection and vibration but also generally increase bearing life. See notes on next
page.
Shaft
Size
Keyword Index
B20-16
Selection of Shaft Diameters (Continued)

Shaft Stiffness, Shaft Deflection-Standard shafting of
adequate strength usually has a sufficiently large diameter to
prevent excessive deflection in ordinary installations. It is wise
to select shafting of generous diameter, as the greater the
diameter, the greater the stiffness. A high tensile strength alloy
shaft, although stronger, is no stiffer than a standard shaft of the
same diameter.
While it is sometimes possible to use an alloy shaft of less
diameter than a standard shaft of equal strength, this practice is
usually inadvisable, as the deflection is increased.
Shafts carrying medium or long clutch sleeves should be
especially generous.
Turning Down Shaft Ends. (B16-15).

Shaft Keyseats - Plain keyseats are preferable to round end
keyseats in respect to causing the least concentration of stress.
However, round end keyseats are often used because of design
and assembly requirements. Ends left by the milling cutter
should not project into babbitted or bronze bushed bearing,
but may project under the sleeve of any DODGE anti-friction
bearing.
Shaft diameters obtained from the tables or chart allow for the
use of keyseats.
Shaft Bearings - On ordinary line shafting, bearings are
commonly spaced about eight feet centers. On large diameter
shafts, the spacing may be somewhat greater.
High Speed Shafts - High speed sometimes causes shaft

whipping or vibration. This can be prevented by making the
shaft diameter generous and the distance between bearing
centers short.
Factors for Shafting Other Than Standard Shafting

When it is necessary to use other than standard shafting,
multiply required diameter for standard shafting as found in the
tables or chart by proper factor from Table24 below.
Standard keyseated shafting, using a safe shear stress of 6,000
PSI is the basis of shafting tables and chart. For safe shear
stress of other materials, use 1/10 of nominal ultimate tensile
strength. For example, use 8,000 for C1045 and 10,000 for 4140
keyseated shafting. When definite physical specifications are
known the least of 13.5% of minimum ultimate tensile strength
and 22.5% of minimum elastic limit in tension may be used for
keyseated shafting; 18% and 30% respectively if not keyseated.
Caution - As the deflection of steel shafting depends upon

the diameter and not upon the analysis of the steel, care
should be exercised in the use of alloy shafting not to reduce
the diameter unduly. Deflection should not be excessive and
bearing capacities should be adequate. It is usually best to use
standard shafting instead of a smaller diameter alloy shaft. The
smaller alloy shaft may safely transmit the torque but often is
undesirable in respect to deflection, vibration and bearing life
Table 24: Shear Stress Factors

2.289
1.817
1.587
1.442
1.339
Safe Shear
Stress
3,000
3,500
4,000
4,500
5,000
Factor
1.260
1.197
1.145
1.101
1.063
Safe Shear
Stress
5,500
6,000
6,500
7,000
8,000
Factor
1.029
1.000
.974
.950
.909
Safe Shear
Stress
9,000
10,000
11,000
12,000
13,000
Factor
.874
.843
.817
.794
.773
Safe Shear
Stress
14,000
15,000
16,000
17,000
18,000
Factor
.754
.737
.721
.707
.693
Keyword Index
Factor
Take-Up Frames
Expansion of Shafting - Where changes in the length of the

shaft due to changes in temperature are to be expected and the
bearings are mounted on supporting structures other than steel,
consideration must be given to expansion. For more detailed
information see B16-20, headed: Expansion of Shafting.
Engineering
Stepped Shafts - For a heavily loaded wheel, a shaft with

a boss or enlarged section under the wheel and turned to
a smaller diameter at the bearings often provides the most
economical installation. The two different diameters should
be joined by a very generous fillet, otherwise a dangerous
concentration of stress will occur at the fillet. See heading -
Shaft Couplings - Where a rigid coupling is used, it is

preferable to have a bearing fairly close. Where a cutoff coupling
or a flexible coupling is used, locate bearings close to each end
of the coupling.
Part Number Index
The use of high tensile strength alloy shafting instead of

standard shafting is of no help in preventing vibration as this will
not improve the stiffness nor deflection characteristics of the
shaft.
Bearings should be mounted on adequate supports so that

accurate alignment may be maintained. Shaft misalignment may
cause shaft or bearing failure.
SLEEVOIL
Wheels and clutches should be located near bearings to avoid

dangerous bending, deflection and vibration.
Location of the bearings close to wheels and couplings is

advisable whether the shaft is transmitting heavy or light loads.
Safe Shear
Stress
500
1,000
1,500
2,000
2,500
Sleeve Bearings
Plummer Blocks
ENGINEERING
B20-17
Plummer Blocks
ENGINEERING
Combine Torsion and Bending of Standard Shaft
(Based on a Safe Shear Stress of 6,000 PS for Keyseated
Shafting)
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
Example: Engine extension shaft driving single cylinder

compressor, 15,000 pound-inches torsional moment, 14,000
pound- inches bending moment. Because of the heavy shock
running load conditions use scales designated Light or Heavy
Starting and Severe Shock Running. Project a line down from
15,000 torsional moment. Project a line to the right from 14,000
bending moment. The two lines intersect between 3-7/16 and
3-15/ 16 curves. Use 3-15/16 standard shafting.
Note: The above chart is based on ASME approved standard

ASA-B17C-1927 withdrawn in 1954. If the latest shaft selection
analysis is required refer to ANSI/ASME B106.1M-1985.
Note: If considering use of other shafting material refer to
Selection of Shaft Diameters on page B16-18.
B20-18
respectively away from the anchor bearing. The structure

supporting the bearings may also expand depending on heat
exposure. Several cases follow:
The anchor bearing is often located near an important wheel. On

long shafts it should preferably be located near the center of the
shaft to keep the expansion of the two ends to a minimum. If the
anchor bearing is babbitted it should be fitted with collars. If it is
an anti-friction bearing it should be of the non-expansion type,
which is the designation of DODGE roller and ball bearings for
use as anchor bearings.
All bearings on the shafting other than the anchor bearing
should permit the shaft to move freely endwise. If babbitted
there should be no thrust collars. If anti-friction these bearings
should be of the expansion type.
Several shafts firmly fastened together expand as if one
continuous shaft. An example of this is line shafting with flange
couplings. If the expansion is considered excessive a long line
shaft may be split into two or more sections, the sections being
connected with expansion couplings.
Case 3 - Certain structural designs have built-in flexibility.

Where this is the case, expansion type bearings are not
necessary.
Case 4 - Short shafts with only two bearings are usually
designed without compensation for expansion, if temperature
variations are not excessive.
DODGE power transmission engineers will gladly make
recommendations concerning shaft expansion problems and the
use of suitable bearings.
Table 25: Linear Expansion of Steel Shafting

100
.302
.340
.378
.416
.454
.491
.529
.567
.605
.643
.680
.718
.756
.832
.907
.983
1.058
1.134
Keyword Index
Base on Expansion In Inches = 0.0000063 x 12 x Length in Feet x Temp. Increase in Degrees Fahrenheit
Temperature Increase-Degrees F.
Length
Temperature Increase-Degrees F.
Length
(Feet)
20
40
60
80
100
(Feet)
20
40
60
80
1
.0015
.0030
.0045
.0060
.0075
40
.060
.121
.181
.242
2
.0030
.0060
.0091
.0121
.0151
45
.068
.136
.204
.272
3
.0045
.0091
.0136
.0181
.0227
50
.076
.151
.227
.302
4
.0060
.0121
.0181
.0242
.0302
55
.083
.166
.249
.333
5
.0076
.0151
.0227
.0302
.0378
60
.091
.181
.272
.363
6
.0091
.0181
.0272
.0363
.0454
65
.098
.197
.295
.393
7
.0106
.0212
.0318
.0423
.0529
70
.106
.212
.317
.423
8
.0121
.0242
.0363
.0484
.0605
75
.113
.227
.340
.454
9
.0136
.0272
.0408
.0544
.0680
80
.121
.242
.363
.484
10
.0151
.0302
.0454
.0605
.0756
85
.129
.257
.386
.514
12
.0181
.0363
.0544
.0726
.0907
90
.136
.272
.408
.544
14
.0212
.0423
.0635
.0847
.1058
95
.144
.287
.431
.575
16
.024
.048
.073
.097
.121
100
.151
.302
.454
.605
18
.027
.054
.082
.109
.136
110
.166
.333
.499
.665
20
.030
.060
.091
.121
.151
120
.181
.363
.544
.726
25
.038
.076
.113
.151
.189
130
.197
.393
.590
.786
30
.045
.091
.136
.181
.227
140
.212
.423
.635
.847
35
.053
.106
.158
.212
.265
150
.227
.454
.680
.907
Take-Up Frames
Advice on Expansion Problems-
Engineering
The amount of shaft expansion is given in Table 25 below.

For example, with a 100F temperature rise on a 150 ft. line
shaft with the anchor bearing located 70 ft. from one end and
80 ft. from the other end the ends will move .529 and .605
Case 2 - For bearings supported on wood, brick, or concrete

walls, or on piers with foundations in the ground, the amount
of expansion is usually considered negligible. Therefore, the full
amount of shafting expansion as calculated in Table25 below,
may be accommodated.
Part Number Index
Amount of Expansion to be provided for-
Case 1- Bearings supported on steel structures, where the

shaft and structure are exposed to the same temperatures, will
expand at the same rate. Expansion allowance is usually not
required. If the shaft is exposed to a higher temperature than the
support, allowances should be made. For example, if the shaft
temperature is expected to change 80, and the temperature of
the structure 60, the resulting movement between shafting and
support ends will be equivalent to a 20 change.
Plummer Blocks
Provision should be made to permit the free movement of

shafting endwise due to temperature changes. One bearing
should serve as an anchor bearing to locate the shaft endwise.
All other bearings should permit the shaft to move freely
endwise.
Sleeve Bearings
Expansion of Shafting
SLEEVOIL
ENGINEERING
B20-19
Plummer Blocks
ENGINEERING
Weights and Properties of Steel Shafting
Table 26: Weight of Round Steel Shafting
Sleeve Bearings
SLEEVOIL
Shaft
Weight of Shafting for Various Lengths in feet
1
2
3
4
5
6
7
8
9
10
12
14
16
18
20
22
Size
3/4
1.50
3.00
4.50
6.00
7.50
9.00
10.50 12.00 13.50 15.00 18.00 21.00 24.00 27.00 30.00 33.00
7/8
2.00
4.00
6.10
8.10
10.20 12.20 14.30 16.30 18.40 20.00 25.00 29.00 33.00 37.00 41.00 45.00
*15/16 2.30
4.70
7.00
9.40
11.70 14.10 16.50 18.80 21.20 23.00 28.00 33.00 38.00 42.00 47.00 52.00
1
2.70
5.30
8.00
10.60 13.30 16.00 18.60 21.30 24.00 27.00 32.00 37.00 43.00 48.00 53.00 59.00
1-1/8
3.40
6.80
10.00 13.40 16.70 20.10 23.40 26.70 30.10 34.00 41.00 47.00 54.00 61.00 68.00 74.00
*1-3/16 3.80
7.60
11.30 15.10 18.90 22.60 26.40 30.10 34.00 38.00 45.00 53.00 60.00 68.00 75.00 83.00
1-1/4
4.20
8.30
12.50 16.70 20.80 25.00 29.20 33.30 37.50 42.00 50.00 58.00 67.00 75.00 83.00 92.00
1-3/8
5.00
10.10 15.30 20.20 25.30 30.30 35.40 40.40 45.40 50.00 60.00 71.00 81.00 91.00
101
111
*1-7/16 5.50
11.00 17.00 22.00 28.00 33.00 39.00 44.00 50.00 55.00 66.00 77.00 88.00 99.00
110
121
1-1/2
6.00
12.00 18.00 24.00 30.00 36.00 42.00 48.00 54.00 60.00 72.00 84.00 96.00
108
120
132
*1-11/16 7.60
15.00 23.00 30.00 38.00 46.00 53.00 61.00 68.00 76.00 91.00
107
122
137
152
167
*1-15/16 10.00 20.00 30.00 40.00 50.00 60.00 70.00 80.00 90.00
100
120
140
161
181
201
221
2
10.70 21.00 32.00 43.00 53.00 64.00 75.00 85.00 96.00
107
128
150
171
192
214
235
*2-3/16 12.80 26.00 38.00 51.00 64.00 77.00 90.00
102
115
128
153
179
205
230
256
281
*2-7/16 15.90 32.00 48.00 63.00 79.00 95.00
111
127
143
159
190
222
254
286
317
349
2-1/2 16.70 34.00 50.00 67.00 83.00
100
117
134
150
167
200
234
267
301
334
367
*2-11/16 19.30 39.00 58.00 77.00 97.00
116
135
154
174
193
232
270
309
348
386
425
*2-15/16 23.00 46.00 69.00 92.00
115
138
161
184
208
231
277
323
369
415
461
507
*3-7/16 31.60 63.00 95.00
126
158
189
221
253
284
316
379
442
505
568
631
695
911
*3-15/16 41.40 83.00
124
166
207
248
290
331
373
414
497
580
662
745
828
*4-7/16 52.60
105
158
210
263
315
368
421
473
526
631
736
841
946
1052
1157
*4-15/6 65.10
130
195
260
326
391
456
521
586
651
781
911
1041
1172
1302
1432
*5-7/16 79.00
158
237
316
395
474
553
632
711
790
947
1105
1263
1421
1579
1737
*6
96.00
192
288
384
481
577
673
769
865
961
1154
1346
1538
1730
1923
2115
* Recommended Diameters These shaft diameters are recommended for use whenever possible as various transmission items such as couplings, collars, clutches,
pulleys, etc., are carried in stock in these sizes, at least up to 3-15/16, in the principal cities throughout the United States.
Weight
24 Per Inc.
36.00
.125
49.00
.170
56.00
.195
64.00
.223
81.00
.281
90.00
.314
100
.348
121
.420
133
.460
144
.500
183
.634
241
.835
256
.890
307
1.06
381
1.32
401
1.39
463
1.61
553
1.92
758
2.63
994
3.45
1262
4.38
1562
5.42
1894
6.58
2307
8.01
Take-Up Frames
Table 27: Weight and Properties of Round Steel Shafting
Engineering
Part Number Index
Keyword Index
Shaft
Size
1/16
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/16
2-1/8
2-3/16
2-1/4
2-5/16
2-3/8
Weight
per Inch
.00087
.0035
.0078
.0139
.0217
.0313
.0425
.0556
.0703
.0868
.1051
.125
.1467
.1701
.1954
.22
.25
.28
.31
.35
.38
.42
.46
.50
.54
.59
.63
.68
.73
.78
.83
.89
.94
1.00
1.06
1.13
1.19
1.25
Section Modulus
Bending
Torsion
.000024
.000048
.000192
.000383
.000647
.001294
.001534
.003068
.002996
.005992
.005177
.010354
.008221
.016442
.0123
.0245
.0175
.0349
.0240
.0479
.0319
.0638
.0414
.0828
.0527
.1053
.0658
.1315
.0809
.1618
.0982
.1963
.1178
.2355
.1398
.2796
.1644
.3288
.1917
.3835
.2220
.4439
.2552
.5104
.2916
.5832
.3313
.6627
.3745
.7490
.4213
.8425
.4718
.9435
.5262
1.052
.5846
1.169
.6471
1.294
.7140
1.428
.7854
1.571
.8614
1.723
.9421
1.884
1.028
2.055
1.118
2.237
1.214
2.428
1.315
2.630
Moment of Inertia
Bending
Torsion
.000001
.000002
.000012
.000024
.000061
.000121
.000192
.000383
.000468
.000936
.000971
.001941
.001798
.003597
.0031
.0061
.0049
.0098
.0075
.0150
.0110
.0219
.0155
.0311
.0214
.0428
.0288
.0575
.0379
.0758
.0491
.0982
.0626
.1251
.0786
.1573
.0976
.1952
.1198
.2397
.1457
.2913
.1755
.3509
.2096
.4192
.2485
.4970
.2926
.5852
.3423
.6846
.3981
.7961
.4604
.9208
.5298
1.060
.6067
1.213
.6917
1.384
.7854
1.571
.8883
1.777
1.001
2.002
1.124
2.248
1.258
2.516
1.404
2.808
1.562
3.124
Shaft
Size
2-7/16
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
2-15/16
3
3-1/16
3-1/8
3-3/16
3-1/4
3-5/16
3-3/8
3-7/16
3-1/2
3-9/16
3-5/8
3-11/16
3-3/4
3-13/16
3-7/8
3-15/16
4
4-1/16
4-1/8
4-3/16
4-1/4
4-5/16
4-3/8
4-7/16
4-1/2
4-9/16
4-5/8
4-11/16
4-3/4
B20-20
Weight
per Inch
1.32
1.39
1.46
1.53
1.61
1.68
1.76
1.84
1.92
2.00
2.08
2.17
2.26
2.35
2.44
2.53
2.63
2.72
2.82
2.92
3.02
3.13
3.23
3.34
3.45
3.56
3.67
3.78
3.90
4.01
4.13
4.25
4.38
4.50
4.63
4.75
4.88
5.01
Section Modulus
Bending
Torsion
1.422
2.844
1.534
3.068
1.652
3.304
1.776
3.552
1.906
3.811
2.042
4.084
2.184
4.368
2.333
4.666
2.489
4.977
2.651
5.301
2.820
5.640
2.996
5.992
3.179
6.359
3.370
6.740
3.568
7.137
3.774
7.548
3.988
7.976
4.209
8.419
4.439
8.878
4.677
9.353
4.923
9.845
5.177
10.35
5.440
10.88
5.712
11.42
5.993
11.99
6.283
12.57
6.582
13.16
6.891
13.78
7.209
14.42
7.536
15.07
7.874
15.75
8.221
16.44
8.579
17.16
8.946
17.89
9.324
18.65
9.713
19.43
10.11
20.22
10.52
21.04
Moment of Inertia
Bending
Torsion
1.733
3.466
1.918
3.835
2.117
4.233
2.331
4.661
2.561
5.122
2.807
5.615
3.071
6.143
3.354
6.707
3.655
7.310
3.976
7.952
4.318
8.636
4.681
9.363
5.067
10.13
5.477
10.95
5.910
11.82
6.369
12.74
6.854
13.71
7.366
14.73
7.907
15.81
8.476
16.95
9.076
18.15
9.707
19.41
10.37
20.74
11.07
22.14
11.80
23.60
12.57
25.13
13.37
26.74
14.21
28.42
15.09
30.19
16.01
32.03
16.98
33.96
17.98
35.97
19.03
38.07
20.13
40.26
21.27
42.54
22.46
44.92
23.70
47.40
24.99
49.98
Shaft
Size
13-1/2
13-3/4
14
14-1/4
14-1/2
14-3/4
15
15-1/4
15-1/2
15-3/4
16
16-1/4
16-1/2
16-3/4
17
17-1/4
17-1/2
17-3/4
18
18-1/4
18-1/2
18-3/4
19
19-1/4
19-1/2
19-3/4
20
20-1/4
20-1/2
20-3/4
21
21-1/4
21-1/2
21-3/4
22
22-1/4
22-1/2
22-3/4
23
23-1/4
23-1/2
23-3/4
24
24-1/4
24-1/2
24-1/4
25
25-1/4
25-1/2
25-3/4
26
26-1/4
26-1/2
26-3/4
27
27-1/2
28
28-1/2
29
29-1/2
30
30-1/2
31
31-1/2
32
32-1/2
33
34
35
B20-21
Weight
per Inch
40.50
42.00
43.60
45.10
46.70
48.40
50.00
51.70
53.40
55.10
56.90
58.70
60.50
62.40
64.20
66.10
68.10
70.00
72.00
74.00
76.10
78.10
80.20
82.40
84.50
86.70
88.90
91.10
93.40
95.70
98.00
100.40
102.70
105.10
107.60
110.00
112.50
115.00
117.60
120.10
122.70
125.40
128.00
130.70
133.40
136.20
138.90
141.70
144.50
147.40
150.30
153.20
156.10
159.00
162.00
168.10
174.30
180.50
186.90
193.40
200.00
206.80
213.60
220.50
227.60
234.80
242.10
256.90
272.30
Section Modulus
Bending
Torsion
241.50
483.10
255.20
510.40
269.40
538.80
284.10
568.20
299.30
598.60
315.00
630.10
331.30
662.70
348.20
696.40
365.60
731.20
383.60
767.10
402.10
804.20
421.30
842.50
441.00
882.00
461.40
922.70
482.30
964.70
503.90
1008
526.20
1052
549.10
1098
572.60
1145
596.70
1193
621.60
1243
647.10
1294
673.40
1347
700.30
1401
728.00
1456
756.30
1513
785.40
1571
815.20
1630
845.80
1692
877.10
1754
909.20
1818
942.10
1884
975.70
1951
1010
2020
1045
2091
1081
2163
1118
2237
1156
2312
1194
2389
1234
2468
1274
2548
1315
2630
1357
2714
1400
2800
1444
2888
1488
2977
1534
3068
1580
3161
1628
3256
1676
3352
1726
3451
1776
3552
1827
3654
1879
3758
1932
3865
2042
4083
2155
4310
2273
4545
2394
4789
2520
5041
2651
5301
2785
5571
2925
5849
3069
6137
3217
6434
3370
6740
3528
7056
3859
7717
4209
8418
Moment of Inertia
Bending
Torsion
1630
3261
1755
3509
1886
3771
2024
4048
2170
4340
2324
4647
2485
4970
2655
5310
2833
5667
3021
6041
3217
6434
3422
6846
3638
7277
3864
7728
4100
8200
4346
8693
4604
9208
4873
9745
5153
10306
5445
10891
5750
11500
6067
12134
6397
12794
6741
13481
7098
14195
7469
14937
7854
15708
8254
16508
8669
17339
9100
18200
9547
19093
10009
20019
10489
20978
10985
21970
11499
22998
12031
24061
12581
25161
13149
26298
13737
27473
14344
28687
14971
29941
15618
31236
16286
32572
16975
33951
17686
35372
18419
36838
19175
38350
19954
39907
20755
41511
21581
43163
22432
44864
23307
46614
24208
48415
25134
50268
26087
52174
28074
56148
30172
60344
32385
64771
34719
69437
37176
74351
39761
79522
42479
84957
45333
90666
48329
96659
102944
51472
54765
109530
58214
116428
65597
131194
73662
147324
Plummer Blocks
Moment of Inertia
Bending
Torsion
26.33
52.66
27.72
55.45
29.17
58.35
30.68
61.36
32.24
64.49
33.86
67.73
35.55
71.09
37.29
74.58
39.10
78.20
40.97
81.94
42.91
85.82
44.92
89.84
46.99
93.99
49.14
98.29
51.36
102.70
53.66
107.30
56.03
112.10
58.48
117.00
61.01
122.00
63.62
127.20
66.31
132.60
69.09
138.20
71.95
143.90
74.90
149.80
77.94
155.90
81.08
162.20
84.30
168.60
87.62
175.20
94.56
189.10
101.90
203.80
109.70
219.30
117.90
235.70
126.50
253.00
135.60
271.20
145.20
290.40
155.30
310.60
165.90
331.90
177.10
354.20
188.80
377.60
201.10
402.10
213.90
427.90
227.40
454.80
241.50
483.00
256.20
512.50
271.60
543.30
287.70
575.50
304.50
609.10
322.10
644.10
340.30
680.70
359.40
718.70
379.20
758.40
399.80
799.60
421.30
842.60
443.60
887.20
466.80
933.60
490.90
981.70
541.80
1084
596.70
1193
655.50
1311
718.70
1437
786.30
1573
858.50
1717
935.70
1871
1018
2036
1105
2211
1198
2397
1297
2594
1402
2804
1513
3026
Sleeve Bearings
Section Modulus
Bending
Torsion
10.94
21.88
11.37
22.75
11.82
23.63
12.27
24.54
12.74
25.48
13.22
26.43
13.70
27.41
14.21
28.41
14.72
29.44
15.25
30.49
15.78
31.57
16.33
32.67
16.90
33.79
17.47
34.95
18.06
36.12
18.66
37.33
19.28
38.56
19.91
39.82
20.55
41.10
21.21
42.41
21.88
43.75
22.56
45.12
23.26
46.51
23.97
47.94
24.69
49.39
25.44
50.87
26.19
52.38
26.96
53.92
28.55
57.09
30.19
60.39
31.90
63.80
33:67
67.35
35.51
71.02
37.41
74.82
39.38
78.76
41.42
82.84
43.52
87.05
45.70
91.40
47.95
95.89
50.27
100.50
52.66
105.30
55.13
110.30
57.67
115.30
60.29
120.60
62.99
126.00
65.77
131.60
68.63
137.30
71.57
143.10
74.59
149.20
77.70
155.40
80.89
161.80
84.17
168.30
87.54
175.10
90.99
182.00
94.54
189.10
98.17
196.30
105.72
211.40
113.65
227.30
121.96
243.90
130.67
261.30
139.78
279.60
149.31
298.60
159.26
318.50
169.65
339.30
180.47
360.90
191.75
383.50
203.48
407.00
215.69
431.40
228.37
456.70
SLEEVOIL
Weight
per Inch
5.15
5.28
5.42
5.56
5.70
5.84
5.98
6.13
6.27
6.42
6.58
6.72
6.88
7.03
7.19
7.35
7.51
7.67
7.84
8.00
8.17
8.34
8.51
8.68
8.86
9.03
9.21
9.39
9.76
10.10
10.50
10.90
11.30
11.70
12.10
12.50
12.90
13.30
13.80
14.30
14.70
15.10
15.60
16.10
16.50
17.00
17.50
18.00
18.50
19.00
19.50
20.10
20.60
21.10
21.70
22.20
23.40
24.50
25.70
26.90
28.10
29.40
30.70
32.00
33.40
34.70
36.10
37.60
39.00
Take-Up Frames
Shaft
Size
4-13/16
4-7/8
4-15/16
5
5-1/16
5-1/8
5-3/16
5-1/4
5-5/16
5-3/8
5-7/16
5-1/2
5-9/16
5-5/8
5-11/16
5-3/4
5-13/16
5-7/8
5-15/16
6
6-1/16
6-1/8
6-3/16
6-1/4
6-5/16
6-3/8
6-7/16
6-1/2
6-5/8
6-3/4
6-7/8
7
7-1/8
7-1/4
7-3/8
7-1/2
7-5/8
7-3/4
7-7/8
8
8-1/8
8-1/4
8-3/8
8-1/2
8-5/8
8-3/4
8-7/8
9
9-1/8
9-1/4
9-3/8
9-1/2
9-5/8
9-3/4
9-7/8
10
10-1/4
10-1/2
10-3/4
11
11-1/4
11-1/2
11-3/4
12
12-1/4
12-1/2
12-3/4
13
13-1/4
Engineering
Table 28: Weight and Properties of Round Steel Shafting
Part Number Index
Weights and Properties of Steel Shafting (Continued)
Keyword Index
ENGINEERING
Plummer Blocks
ENGINEERING
Viscosity Classification Equivalents
OIL VISCOSITY EQUIVALENCY CHART
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
ISO VISCOSITY CLASSIFICATION SYSTEM
Keyword Index
All industrial oils are graded according to the ISO Viscosity

Classification System, approved by the International Standards
Organizations (ISO). Each ISO viscosity grade number
corresponds to the mid-point of viscosity range expressed in
centistokes (cSt) at 40C. For example, a lubricant with an ISO
grade of 32 has a viscosity within the range of 28.80-35.2, the
midpoint of which is 32.
Rule-of-Thumb: The comparable ISO grade of a competitive

product whose viscosity in SUS at 100F is known can be
determined by using the following conversion formula:
B20-22
SUS @ 100 F 5 = cSt @ 40C
Avoirdupois or Commercial Weight

1 gross or long ton = 2240 pounds.
1 net or short ton = 2000 pounds.
1 pound = 16 ounces = 7000 grains.
1 ounce = 16 drams = 437.5 grains.
Measures of Pressure
Square Measure
1 square mile = 640 acres = 6400 square chains.
1 acre = 10 square chains = 4840 square yards = 43,560 square feet.
1 square chain = 16 square rods = 484 square yards = 4356 square feet.
1 square rod = 30.25 square yards = 272.25 square feet = 625 square links.
1 square yard = 9 square feet.
1 square foot = 144 square inches.
An acre is equal to a square, the side of which is 208.7 feet.
Dry Measure
1 bushel (U.S. or Winchester struck bushel) = 1.2445 cubic foot = 2150.42 cubic inches.
1 bushel = 4 pecks = 32 quarts = 64 pints.
1 peck = 8 quarts = 16 pints.
1 quart = 2 pints.
1 heaped bushel = 1 1/4 struck bushel.
1 cubic foot = 0.8036 struck bushel.
1 British Imperial bushel=8 Imperial gallons=1.2837 cubic foot = 2218.19 cubic inches.
Liquid Measure
1 U.S. gallon = 0.1337 cubic foot = 231 cubic inches = 4 quarts = 8 pints.
1 quart = 2 pints = 8 gills.
1 pint = 4 gills.
1 British Imperial gallon = 1.2003 U.S. gallon = 277.27 cubic inches.
1 cubic foot = 7.48 U.S. gallons.
Cubic Measure
1 cubic yard = 27 cubic feet.
1 cubic foot = 1728 cubic inches.
The following measures are also used for wood and masonry:
1 cord of wood = 4 X 4 X 8 feet = 128 cubic feet.
1 perch of masonry = 16-1/2 X 1-1/2 X 1 foot = 24-3/4 cubic feet.
Shipping Measure
For measuring entire internal capacity of a vessel: 1 register ton = 100 cubic feet.
For measurement of cargo:
1 U.S. shipping ton = 40 cubic feet = 32.143 U.S. bushels = 31.16 Imperial bushels.
British shipping ton = 42 cubic feet = 33.75 U.S. bushels = 32.72 Imperial bushels.
Troy Weight, Used for Weighing Gold and Silver

1 pound = 12 ounces = 5760 grains.
1 ounce = 20 pennyweights = 480 grains.
1 pennyweight = 24 grains.
1 carat (used in weighing diamonds) = 3.086 grains.
1 grain Troy = 1 grain avoirdupois = 1 grain apothecaries weight.
Circular and Angular Measure

=1 minute ( )
=1 degree ( - )
=1 circumference (C)
=1 radian
=1 circumference (C)
Specific Gravity
Board Measure
One foot board measure is a piece of wood 12 inches square by 1 inch thick, or 144 cubic
inches. 1 cubic foot therefore equals 12 feet board measure
Keyword Index
The specific gravity of a substance is its weight as compared with the weight of an equal

bulk of pure water.
For making specific gravity determinations the temperature of the water is usually taken

at 62 F. when 1 cubic foot of water weighs 62.355 lbs. Water is at its greatest density

at 39.20 F. or 4 Centigrade.
Temperature
The following equation will be found convenient for transforming temperature from one
system to another:
Let F = degrees Fahrenheit; C = degrees Centigrade; R = degrees Reamur.
F-32 = C = R
180 100 80
Engineering
Measure Used for Diameters and Areas of Electric Wires

1 circular inch = area of circle 1 inch in diameter = 0.7854 square inch.
1 circular inch = 1,000,000 circular mils.
1 square inch = 1.2732 circular inch = 1,273,239 circular mils.
A circular mil is the area of a circle 0.001 inch in diameter.
Part Number Index
60 seconds ()
60 minutes
360 degrees
57.3 degrees
2 radians
1 pound per square inch = 144 pounds per square foot = 0.068 atmosphere = 2.042
inches of mercury at 62 degrees F. = 27.7 inches of water at 62 degrees F. = 2.31
feet of water at 62 degrees F.
1 atmosphere = 30 inches of mercury at 62 degrees F. = 14.7 pounds per square inch =
2116.3 pounds per square foot = 33.95 feet of water at 62 degrees F.
1 foot of water at 62 degrees F. = 62.355 pounds per square foot = 0.433 pound per
square inch.
1 inch of mercury at 62 degrees F. = 1.132 foot of water = 13.58 inches of water = 0.491
pound per square inch.
Column of water 12 in. high, 1 in. dia. = .341 lbs.
Take-Up Frames
Surveyors Measure
1 mile = 8 furlongs = 80 chains.
1 furlong = 10 chains = 220 yards.
1 chain = 4 rods = 22 yards = 66 feet = 100 links.
1 link = 7.92 inches.
Plummer Blocks
Long Measure
1 mile = 1760 yards = 5280 feet.
1 yard = 3 feet = 36 inches.
1 foot = 12 inches.
Sleeve Bearings
English Standard Measures
SLEEVOIL
ENGINEERING
B20-23
Plummer Blocks
ENGINEERING
TABLE 29: Decimal and Millimeter Equivalents of Fractions
Inches
Fractions
1/64
1/32
3/64
Sleeve Bearings
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
SLEEVOIL
7/32
15/64
1/41
7/64
9/32
19/64
5/16
21/64
Decimals
.015625
.03125
.046875
.0625
.078125
.09375
.109375
.125
.140625
.15625
.171875
.1875
.203125
.21875
.234375
.250
.265625
.28125
.296875
.3125
.328125
Millimeters
.397
.794
1.191
1.588
1.984
2.381
2.778
3.175
3.582
3.969
4.366
4.763
5.159
5.556
5.953
6.350
6.747
7.144
7.541
7.938
8.334
Take-Up Frames
Inches
Fractions
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
Decimals
.34375
.359375
.375
.390625
.40625
4.21875
4.375
4.53125
.46875
.48376
.500
.515625
.53125
.546875
.5625
.578125
.59375
.609375
.625
.60625
.65625
.671875
Engineering
Part Number Index
Keyword Index
B20-24
Millimeters
8.7319
9.128
9.525
9.922
10.319
10.716
11.113
11.509
11.906
12.303
12.700
13.097
13.494
13.891
14.288
14.684
14.081
15.478
15.875
16.272
16.669
17.066
Inches
Fractions
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1
Decimals
.6875
.703125
.71875
.734375
.750
.765625
.78125
.796875
.8125
.828125
.84375
.859375
.875
.890625
.90524
.921875
.9375
.953125
.96875
.984375
1.000
Millimeters
17.463
17.859
18.256
18.653
19.050
19.447
19.844
20.241
20.638
21.034
21.431
21.828
22.225
22.622
23.019
23.416
23.813
24.209
24.606
25.003
25.400
B20-25
Decimal
4.05511
4.09448
4.13385
4.17322
4.21259
4.25196
4.29133
4.33070
4.37007
4.40944
4.44881
4.48818
4.52755
4.56692
4.60629
4.64566
4.68503
4.72440
4.76378
4.80315
4.84252
4.88189
4.92126
4.96063
5.00000
5.03937
5.07875
5.11811
5.15749
5.19685
5.23622
5.27559
5.31496
5.35433
5.39370
.543307
.547244
5.51181
5.55118
5.59055
5.62992
5.66929
5.70866
5.748.4
5.78740
5.82677
5.86614
5.90551
5.94488
5.98425
6.02362
Millimeter
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
Decimal
6.06299
6.10236
6.14173
6.18110
6.22047
6.25984
6.29921
6.33858
6.37795
6.41732
6.45669
6.49606
6.53543
6.57480
6.61417
6.65354
6.69291
6.73228
6.77165
6.81102
.685039
6.88976
6.92913
.696850
7.00787
7.04724
7.08661
7.12598
7.16535
7.20472
7.24409
7.28346
7.32283
7.36220
7.40157
7.44094
7.48031
7.51968
7.55905
7.59842
7.63779
7.67716
7.71653
7.75590
7.79527
7.83464
7.87401
7.91338
795275
799221
8.03149
Millimeter
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
-
Decimal
8.07086
8.11023
8.14960
8.18897
8.22834
8.26771
8.30708
8.34645
8.38582
8.42519
8.46456
8.50393
8.54330
8.58267
8.62204
8.66141
8.70078
8.74015
8.77952
8.81889
8.85826
8.897.63
8.93700
8.97637
9.01574
9.05511
9.09448
9.13385
9.17322
9.21259
9.25196
9.29133
9.33070
9.37007
9.40944
9.44881
9.48818
9.52755
9.56692
9.60629
9.64566
9.68503
9.72440
9.76378
9.80315
9.84252
9.88189
9.92126
9.96063
10.00000
-
Plummer Blocks
Millimeter
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
Sleeve Bearings
Decimal
2.04724
2.08661
2.12598
2.16535
2.20472
2.24409
2.28346
2.32283
2.36220
2.40157
2.44094
2.48031
2.51968
2.55905
2.59842
2.63779
2.67716
2.71653
2.75590
2.79527
2.83464
2.87401
2.91338
2.95275
2.99212
3.03149
3.07086
3.11023
3.14960
3.18897
3.22834
3.26771
.303708
3.34645
3.38582
.342519
3.46456
3.50393
3.54330
.358267
3.62204
3.66141
3.70078
3.74015
3.77952
3.81899
3.85826
3.89763
3.93710
3.97637
4.01574
SLEEVOIL
Millimeter
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
Take-Up Frames
Decimal
.03937
.07874
.11811
.15748
.19685
.23622
.27559
.31496
.35433
.39370
.43307
.47244
.51181
.55118
.59055
.62992
.66929
.70866
.74803
.78740
.82677
.86614
.90551
.94488
.98425
1.02362
1.06299
1.10236
1.14173
1.18110
1.22047
1.25984
1.29921
1.33858
1.37795
1.41732
1.45669
1.49606
1.53543
1.57480
1.61417
1.65354
1.69291
1.73228
1.77165
1.81102
1.85039
1.88976
1.92913
1.96850
2.00787
Engineering
Millimeter
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
Part Number Index
Table 30: Millimeter-Inch Equivalents: 1 = 25.4mm (.03937 = 1mm)
Keyword Index
ENGINEERING
Plummer Blocks
ENGINEERING
Metric System of Measurements
Measures of Length
Sleeve Bearings
10
10
10
1000
millimeters (mm.)
centimeters
decimeters
meter
=
=
=
=
Square Measure
1 centimeter (cm.)
1 decimeter (dm.)
1 meter (m.)
1 kilometer (km.)
100
100
100
sq. millimeters (mm.2) = 1 sq. centimeter (cm.2)

sq. centimeters
= 1 sq. decimeter (dm.2)
sq. decimeters
= 1 sq. meter (m.2)
1000
1000
1000
cu. millimeters (mm.3) = 1 cu. centimeter (cm.3)

cu. centimeters
= 1 cu. decimeter (dm.3)
cu. decimeters
= 1 cu. meter (m.3)
Cubic Measure
Measure of Weight
10
10
10
10
10
10
1000
milligrams (mg.)
centigrams
decigrams
grams
decagrams
hectograms
kilograms
=
=
=
=
=
=
=
1 centigram (cg.)
1 decigram (dg.)
1 gram (g.)
1 decagram (Dg.)
1 hectogram (Hg.)
1 Kilogram (Kg.)
1 (metric) ton (T.)
SLEEVOIL
Surveyors Square Measure

100
100
100
square meters (m.2) = 1 are (ar.)

acres
= 1 hectare (har.)
hectares
= 1 sq. kilometer (Km.2)
Dry and Liquid Measure

10
milliliters (ml.)
= 1 centiliter (cl.)
10
centiliters
= 1 deciliter (dl.)
10
deciliters
= 1 liter (l.)
100
liters
= 1 hectoliter (HI.)
1 liter = 1 cubic decimeter = the volume of 1 kilogram of pure water
at a temperature of 39.2 degrees F.
Take-Up Frames
Engineering
Part Number Index
Keyword Index
B20-26
Square Millimeters X.00155 = square inches.

Square centimeters X.155 = square inches.
Square Meters X 10.76387 = square feet.
Square Meters X 1.19599 = square yards.
Hectares X 2.47104 = acres.
Square Kilometers X 247.104 = acres.
Square Kilometers X.3861 = square miles.
Cubic centimeters X.033818 = fluid ounces.

Cubic centimeters X.061023 = cubic inches.
Cubic centimeters X.271 = fluid drams.
Liters X 61.023 = cubic inches.
Liters X 1.05668 = quarts.
Liters X .26417 = gallons.
Liters X.035317 = cubic feet.
Hectoliters X 26.417 = gallons.
Hectoliters X 3.5317 = cubic feet.
Hectoliters X 2.83794 = bushel (2150.42 cu. in.).
Hectoliters X.1308 = cubic yards.
Cubic Meters x 264.17 = gallons.
Cubic Meters x 35.317 = cubic feet.
Cubic Meters X 1.308 = cubic yards.
Calorie x 0.003968 = B.T.U.

Joules X.7373 = pound-feet.
Newton-Meters X 8.851 = pound-inches
Cheval Vapeur X.9863 = Horsepower.
Kilowatts X 1.34 = Horsepower.
Kilowatt Hours X 3415 = B.T.U.
(Degrees Cent. X 1.8) +32 = degrees Fahr.
(Degrees Reamur X 2.25) + 32 = degrees Fahr.
Area Conversion Constants for Metric and U.S. Units

Square Inches X 645.163 = square millimeters.
Square Inches x 6.45163 = square centimeters.
Square Feet x.0929 = square meters.
Square Yards X.83613 = square meters.
Acres X.40469 = hectares.
Acres X.0040469 = square kilometers.
Square Miles X 2.5899 = square kilometers.
Volume Conversion Constants for Metric and U.S. Units
Fluid Ounces X 29.57 = cubic centimeters.
Cubic Inches X 16.387 = cubic centimeters.
Fluid Drams x 3.69 = cubic centimeters.
Cubic Inches X.016387 = liters.
Quarts x.94636 = liters.
Gallons x 3.78543 = liters.
Cubic Feet x 28.316 = liters.
Gallons x.0378543 = hectoliters.
Cubic Feet x.28316 = hectoliters.
Bushels (2150.42 cu. in.) X.352379 = hectoliters.
Cubic Yards x 7.645 = hectoliters.
Gallons x.00378543 = cubic meters.
Cubic Feet x.028316 = cubic meters.
Cubic Yards x.7645 = cubic meters.
Power and Heat Conversion Constants for Metric and U.S. Units
B.T.U. X 252 = calories.
Pound-Feet X 1.3563 = joules.
Pound-inches X.11298 = Newton-meters.
Horsepower X 1.014 = Cheval Vapeur.
Horsepower X.746 = kilowatts.
B.T.U. X.00029282 = kilowatt hours.
(Degrees Fahr. - 32) x.555 = degrees Cent.
(Degrees Fahr. - 32) x.444 = degrees Reamur.
B20-27
Plummer Blocks
Sleeve Bearings
Weight Conversion Constants for Metric and U.S. Units

Dynes X.0010193 = grams.
Grains X.0648 = grams.
Ounces (Avd.) X 28.35 = grams.
Fluid Ounces (Water) X 29.57 = grams.
Ounces (Avd.) X.02835 = kilograms.
Pounds (Avd.) X.45359 = kilograms.
Net Ton (2000 lbs.) X.90719 = Metric Tons (1000 Kg.).
Gross Ton (2240 Ibs.) X 1.01605 = Metric Tons (1000 Kg.).
SLEEVOIL
Grams X 981 = dynes.

Grams X 15.432 = grains.
Grams X.03527 = ounces (Avd.).
Grams x.033818 = fluid ounces (water).
Kilograms X 35.27 = ounces (Avd.).
Kilograms X 2.20462 = pounds (Avd.).
Metric Tons (1000 Kg.) X 1.10231 = Net Ton (2000 lbs.).
Metric Tons (1000 Kg.) X.98421 = Gross Ton (2240 lbs.).
Take-Up Frames
Length Conversion Constants for Metric and U.S. Units

Inches X 25.4001 = millimeters.
Inches X.0254 = meters.
Feet x.30480 = meters.
Yards X.91440 = meters.
Feet x.0003048 = kilometers.
Statute Miles X 1.60935 = kilometers.
Nautical Miles x 1.85325 = kilometers.
Engineering
Millimeters X.039370 = inches.

Meters x 39.370 = inches.
Meters X 3.2808 = feet.
Meters X 1.09361 = yards.
Kilometers X 3,280.8 = feet.
Kilometers X.62137 = Statute Miles.
Kilometers x.53959 = Nautical Miles.
Part Number Index
Metric System of Measurements (Continued)
Keyword Index
ENGINEERING
Plummer Blocks
ENGINEERING
COMMON CONVERSION FACTORS
USEFUL IN MECHANICAL POWER TRANSMISSION
Symbols and Abbreviations Used in Conversion Factors
Sleeve Bearings
Symbols and abbreviations found in this section are those

currently used in many texts and product publications.
Considerable effort is underway to standardize on
abbreviations for metric and English units of measurement.
Recently, ASTM (American Society for Testing and
Materials) and IEEE (Institute of Electrical and Electronic
Engineers) published a standard practice on the metric
system. This publication consolidates a great deal of the
current thinking and provides a system of abbreviations
and symbols that differ somewhat from those used here.
This Handbook has retained use of familiar abbreviations

consistent with existing product and trade literature rather than
the abbreviations found in current publications of technical and
scientific societies.
Prefixes Used in the Metric System
Common prefixes and symbols used in the metric system are listed
below. An example of use is 1000 meters is equivalent to 1 kilometer,
and 1/1000 of one meter is equivalent to 1 millimeter.
Prefix
SLEEVOIL
Take-Up Frames
Engineering
Symbol
Multiplication Factor-Decimal and Power of 10
exa
E
1,000,000,000,000,000,000 or 1018 or one quintillion
peta
P
1,000,000,000,000,000 or 1015 or one quadrillion
tera
T
1,000,000,000,000 or 1012 or one trillion
giga
G
1,000,000,000 or 109 or one billion
mega
M
1,000,000 or 106 or one million
kilo
k
1,000 or 103 or one thousand
*hecto
h
100 or 102 or one hundred
*deka
da
10 or 101 or ten
**deci
d
0.1 or 10-1 or one tenth
**centi
c
0.01 or 10-2 or one hundredth
mill
m
0.001 or 10-3 or one thousandth
micro
0.000,001 or 10-6 or one millionth

nano
n
0.000,000,001 or 10-9 or one billionth
pico
p
0.000,000,000,001 or 10-12 or one trillionth
femto
f
0.000,000,000,000,001 or 10-15 or one quadrillionth
atto
a
0.000,000,000,000,000,001 or 10-18 or one quintillionth
* Not commonly used.
** Not commonly used except for special situations.
The centimeter as a unit of length is in common use.
The decibel is a unit in both electrical and acoustical work.
ASTM/IEEE Standard Metric Practice, ASTM E 380-75, IEEE Std. 268-1976.

Reprinted with Permission of the Power Transmission Distributors Association
Part Number Index
Keyword Index
B20-28
l
lb
Ib-ft
m
m per sec2
mi
mm
mph
MGD
N
oz
oz-in
Pa
psi
psia or psig
pt
qt
R
rad
rev
rpm
sec
sq
std
temp
wt
yd
yr
liters
pounds
pound-feet (torque)
meters
meters per second per second
miles
millimeters
miles per hour
millions of gallons per day
Newtons
ounces
ounce-inches (torque)
Pascals
pounds per square inch
pounds per square inch
absolute or gauge
pint
quart
degrees Rankine (Fahrenheit, absolute)
radians
revolutions
revolutions per minute
seconds
square
standard
temperature
weight
yard
year
Plummer Blocks
atmosphere
avoirdupois
barrels
bushels
degrees Centigrade or Celsius
cubic centimeters
cubic feet per minute
cubic feet per second
centimeter
cubic
degrees
degrees Fahrenheit
feet per second
feet
foot-pounds (work or energy)
feet per second (alternate)
feet per second per second
acceleration due to gravity
grams
gallons
gallons per minute
horsepower
hour
inches
inch-pounds (work or energy)
degrees Kelvin
kilograms
kilometers
knots
kilowatts
Term
Sleeve Bearings
atm
avdp
bbl
bu
C
cc
cfm
cfs
cm
cu
deg
F
fps
ft
ft-Ib
ft per sec
ft per sec2
g
g
gal
gpm
hp
hr
in
in-lb
K
kg
km
kn
kW
Symbol or
Abbreviation
Term
SLEEVOIL
Symbol or
Abbreviation
Take-Up Frames
ENGINEERING
(sq yd in a sq km)
(cc in a cu ft)
(gpm in a liter per sec)
(psi in an atmosphere)
(psi in a ft of water)
(lb-in in an oz-in)
Part Number Index
1195990
4389.12
448.86
14.70
0.4331
0.0625
Keyword Index
A minimum of four significant figures are used in conversion factors

presented here. Where the conversion factor is exact (for example, 1
foot contains 12 inches), decimal fractions are not necessary. Also,
where large whole numbers are used (for example, 1 square kilometer
contains 1195990 square yards), decimal fractions are not used
unless justified by the accuracy of ordinary computations.
Engineering
Rounding of Numbers
B20-29
Plummer Blocks
ENGINEERING
VELOCITY
Sleeve Bearings
centimeters per second (cm per sec). . . . . . . . . . . . . . . . . . . . . . . feet per second (fps or ft per sec). . . . . . . . . . . . . . . . . . . . . . . . .
feet per second (fps) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . centimeters per second (cm per sec). . . . . . . . . . . . . . . . . . . . . . .
meters per second (m per sec) . . . . . . . . . . . . . . . . . . . . . . . . . . .
kilometers per hour (km per hr). . . . . . . . . . . . . . . . . . . . . . . . . . .
miles per hour (mph). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
kilometers per hour (km per hr). . . . . . . . . . . . . . . . . . . . . . . . . . . knots (kn) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
feet per second (fps) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
feet per minute (ft per min.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
knots (kn) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . miles per hour (mph). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
radians per second (rad per sec). . . . . . . . . . . . . . . . . . . . . . . . . . revolutions per minute (rpm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
degrees per minute (deg per min.) . . . . . . . . . . . . . . . . . . . . . . . .
revolutions per minute (rpm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . radians per second (rad per sec). . . . . . . . . . . . . . . . . . . . . . . . . .
degrees per minute (deg per min.) . . . . . . . . . . . . . . . . . . . . . . . .
0.3281
30.48
0.3048
1.097
0.6818
0.5396
1.467
1.609
88
1.152
1.853
9.55
3437.7
0.1047
360
SLEEVOIL
ACCELERATION
COLUMN A
Take-Up Frames
To Convert From...
To...
Multiply
Col. A by
feet per second per second (ft per sec2)

m per sec2
revolutions per minute per second (rpm per sec)
rad per sec2
meters per second per second (m per sec2). . . . . . . . . . . . . . . . . .

ft per sec2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
radians per second per second (rad per sec2) . . . . . . . . . . . . . . . .
rpm per sec. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3048
3.281
0.1047
9.55
Engineering
Part Number Index
Keyword Index
B20-30
PRESSURE
pascals (Pa). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pounds per square inch (psi). . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pounds per square foot (lb per ft2). . . . . . . . . . . . . . . . . . . . . . . . .
newtons per square meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pounds per square inch (psi). . . . . . . . . . . . . . . . . . . . . . . . . . . . . atmospheres, std. (atm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pounds per square foot (lb per ft2). . . . . . . . . . . . . . . . . . . . . . . . .
pascals (Pa). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
foot of water (ft of H20) 60F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
atmospheres (atm), standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
lb per ft2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pa. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
inch of water, 60F (in of H20). . . . . . . . . . . . . . . . . . . . . . . . . . . . psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
lb per ft2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pa. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
foot of water, 60F (ft of H20). . . . . . . . . . . . . . . . . . . . . . . . . . . . . psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
lb per ft2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pa. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WEIGHT, MASS, INERTIA
0.4536
16
2.205
35.27
Plummer Blocks
Sleeve Bearings
Keyword Index
pounds (Ib)*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kilograms (kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ounces (oz). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
kilograms (kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pounds (lb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ounces (oz). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.0001450
0.02089
1
0.0680
144
6894.8
2.301
14.70
2116.8
101325
0.03609
5.197
248.84
0.4331
62.36
2985.9
SLEEVOIL
0.008434
0.1337
8.022
0.0101
0.1606
9.634
373.77
448.86
1699.2
2.119
13.20
15.85
43.81
92.85
694.44
Take-Up Frames
gallons per minute, US (gpm). . . . . . . . . . . . . . . . . . . . . . . . . . . . liters per second (l per sec). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

cubic feet per minute (cfm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
cubic feet per hour (cu ft per hr). . . . . . . . . . . . . . . . . . . . . . . . . .
gallons per minute, UK or Canadian (gpm) . . . . . . . . . . . . . . . . . . liters per second (l per sec). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
cubic feet per hour (cu ft per hr). . . . . . . . . . . . . . . . . . . . . . . . . .
cubic feet per second (cfs). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . gpm (UK or Canadian) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
gpm (US) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
liters per second (l per sec). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
liters per second (l per sec). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . cubic feet per minute (cfm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
gpm (UK or Canadian) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
gpm (US) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
millions of gallons per day, US (MGD) . . . . . . . . . . . . . . . . . . . . . . liters per second (l per sec). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
gallons per minute, US (gpm). . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engineering
VOLUMETRIC FLOW RATES
Part Number Index
ENGINEERING
B20-31
Plummer Blocks
ENGINEERING
WEIGHT, MASS, INERTIA, (Continued)
COLUMN A
Sleeve Bearings
Convert From
To
tons (short) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . metric tons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
kilograms (kg). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pounds (lb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
metric tons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tons (short) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
kilograms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pounds, weight (lb). . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . slugs, mass (lb-sec2 per ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pound-foot2 (lb-ft2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kilogram-meters2 (kg-m2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
*pounds and ounces are avoirdupois
Multiply Col A By This Factor

0.9072
907.2
2000
1.102
1000
2205
0.03106
0.04214
FORCE AND TORQUE

SLEEVOIL
Take-Up Frames
pounds (lb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . newtons(N) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.448

newtons (N) . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pounds (lb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.2248
newton-meters (N-m). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pound-feet (lb-ft). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7376
pound-inches (lb-in). . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.851
ounce-inches (oz-in). . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141.60
ounce-inches (oz-in). . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ib-ft.. . . . . . . . . . . . . . .
0.005208
N-m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.007062
lb-in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.0625
pound-inches (lb-in). . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ib-ft.. . . . . . . . . . . . . . .
0.0833
N-m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1298
oz-In. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
pound-feet (lb-ft). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N-m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.356
lb -in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
oz-In. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
POWER
Engineering
horsepower (hp). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kilowatts (kW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

foot-pounds per second (ft-lb per sec). . . . . . . . . . . . . . . . . . . . . .
foot-pounds per minute (ft-lb per min.). . . . . . . . . . . . . . . . . . . . .
kilowatts (kW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . horsepower (hp). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.7457
550
33000
1.341
TEMPERATURE
Use This Relationship
degrees Fahrenheit (F). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

degrees Celsius (C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Examples:

degrees Rankine (R) . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
degrees Kelvin (K) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C =5/9 (F-32)
F=9/5C+32
R =F+459.69
K=C+273.16
Part Number Index
1.. Convert 12F to C. . C = 5/9 (F-32) = 5/9 (12-32) = 5/9 (-20)

.Answer = -11.1C
2. . Convert 40C to F. . F = 9/5C + 32 = 9/5 (40) + 32 = 72 + 32
. Answer = 104F
Keyword Index
B20-32
Plummer Blocks
ENGINEERING
GRAVITATIONAL CONSTANT

g = 32.174 feet per second per second (ft per sec2)
= 9.8067 meters per second per second (m per sec2)
0.07528
0.08305
0.005234
0.07274
1.000 grams per cc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

0.998. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.992. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.02-1.03. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.789. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.78-0.82. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.70-0.75. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62.43
62.32
61.94
64.00
49.2
50
45
2.70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.80. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.89. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.74. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.80. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
169
549
555
1206
443
709
109
487
480
1.01-1.05. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.13-1.15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.35-1.46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.31 - 1.43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.926-0.940 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.30-1.58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
64
74
71
87
75
86
58
89
LIQUIDS
Water @ 4C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SeaWater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ethyl alcohol 100% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Kerosene. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gasoline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
METALS
Aluminum (95% Al) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bronze (90% Cu, 10% Zn). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Copper (Annealed, ACS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Iron, gray cast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Magnesium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steel (0.4-0.5% Carbon) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steel, 410 stainless. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ABS, general purpose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Acrylics, cast sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nylon 6/6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phenolic, general purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Polycarbonates, general purpose. . . . . . . . . . . . . . . . . . . . . . . . . .
Polyesters, thermoplastic, unreinforced . . . . . . . . . . . . . . . . . . . . .
Polyehtylene, medium density. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Polyvinyl Chloride. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keyword Index
ENGINEERING PLASTICS
SLEEVOIL
1.30 grams per liter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.45 grams per liter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.09 grams per liter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.25 grams per liter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
All Other Materials
grams per cc
Take-Up Frames
Air. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oxygen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydrogen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nitrogen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engineering
GASES @ 68F, std atm
Part Number Index
REPRESENTATIVE DENSITIES
Grams per cc
lb per cu ft
Sleeve Bearings
APPROXIMATE DENSITIES OF COMMON MATERIALS
B20-33
Plummer Blocks
ENGINEERING
APPROXIMATE DENSITIES OF COMMON MATERIALS
REPRESENTATIVE DENSITIES
Grams per cc
lb per cu ft
OTHER MATERIALS
Sleeve Bearings
SLEEVOIL
Concrete (stone and sand). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2-2.4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Limestone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Anthracite coal, not piled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4-1.8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bituminous coal, not piled. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2-1.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lignite coal, not piled. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1-1.4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wood, air dried:
Douglas fir. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.48-0.55. . . . . . . . . . . . . . . . . . . . . . . . . . .
White oak. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.77. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
White maple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oregon pine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hickory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.74-0.80. . . . . . . . . . . . . . . . . . . . . . . . . . .
Mahogany. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.56-0.85. . . . . . . . . . . . . . . . . . . . . . . . . . .
African teak. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.99. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indian teak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.66-0.88. . . . . . . . . . . . . . . . . . . . . . . . . . .
144
94
100
83
78
32
48
33
32
48
44
62
48
Formulas and Constants
Take-Up Frames
Engineering
1 HP = 33,000 Foot-pounds of work per minute.

1 HP =.746 K.W. = K.W.P 1.341.
1 HP = 2547 B.T.U. per hour.
1 B.T.U. = Heat required to raise 1 lb. water 1-F.
1 B.T.U. = 777.6 Foot-pounds work.
1 Kilowatt Hour = 3415 B.T.U.
Heat Value of Carbon = 14,600 B.T.U. per pound.
Latent Heat of Fusion of Ice = 143.15 B.T.U. per pound.
Latent Heat of Evaporation of Water at 212 F. =

970.4 B.T.U. per pound.
Total Heat of Saturated Steam at atmospheric pressure =

1,150.4 B.T.U. per pound.
1 Ton of Refrigeration = 288,000 B.T.U. per 24 hours.
g = Acceleration of Gravity (commonly taken as 32.16

feet per second per second).
1 Radian = 57.296 degrees.
1 Meter = 100 cm. = 39.37 inches.
1 Kilometer =.62137 miles.

1 Gallon = 231 cubic inches.
1 Barrel = 31.5 gallons.
Atmospheric Pressure = 14.7 pounds per sq. in. = 29.92

inches mercury at 32 F.
1 Lb. per Sq. In. Pressure = 2.3095 feet fresh water at
62 F. = 2.0355 inches mercury at 32 F. = 2.0416
inches mercury at 62 F.
Water Pressure (pounds per sq. in.) =.433 X height of water in feet
(Fresh water at 62F.).
Weight of 1 cu. ft. fresh Water = 62.355 Ibs. at 62F. =
59.76 lbs. at 212 F.
Weight of 1 cu. ft. Air at 14.7 Ibs. per sq. in. Pressure =
.07608 Ibs. at 62 F. =.08073 lbs. at 32 F.
Also look in the General Index under Weights, Measures, or the

subject material required.
Part Number Index

Keyword Index
B20-34
Kinetic energy of rotation of a flywheel (foot pounds)

=.0001705 N2(WR2)*.
Table 31: Formulas for Flywheel Rims
Torque to uniformly accelerate or decelerate a flywheel

=
Property
.03908 (N2 - N1) (WR2), * pound-inches

t
where N2 = final R.P.M. and N1 = initial R.P.M.

Velocity at outside diameter (feet per minute) = 0.2618 ND.

W = weight (pounds).
R = radius of gyration (feet).
N = speed (R.P.M.)
t = time to change from N1 to N2 (seconds).
F = face of rim (inches).
D = outside diameter of rim (inches).
d = inside diameter of rim (inches).
Steel
Cast Iron Rim
Rim
(Based on.26 Ibs.
(Based on .283 lbs.
per cu. in.)
per cu. in.)
Volume
(Cubic
Inches)
.7854F(D2-d2)
.7854F(D2-d2)
.7854F(D2-d2)
W
Weight
(Pounds)
.2042F(D2-d2)
.2223F(D2-d2)
.7854FK(D2-d2)
R
Radius of
Gyration
(Feet)
WR2
Wt X Sq.
of Radius of
Gyration
(Lbs. X Ft.2)
T
Tensile Load
in rim (Lbs.)
K = weight per cubic inch of material (pounds).
*WR = flywheel effect (pounds X feet2). See table to the right for
WR2 of rims. Ordinarily the WR2 of the rim only is considered.
In unusual instances the relatively small WR2 values of the hub
2
Rim of any
material
weighing
K pounds per
cubic inch
.8681 (D2-d2)
1000
0.8681 (D2-d2)
1000
Plummer Blocks
.8681 (D2-d2)
1000
.1773F(D4-d4)
1000
.1929F(D4-d4)
1000
.6818FK(D4-d4)
1000
.3078FN2(D3-d3)
1000000
.3350FN2(D3-d3)
1000000
1,184FKN2(D3-d3)
1000000
Centrifugal force causes this tensile load at each and every

section of the rim. Hence, on rims split into two or more
sections the fastening at each joint should be designed to
take the full load as calculated from the formula here given.
Take-Up Frames
Formulas for Entire Flywheel
and arms or web can be added directly to the WR2 of the rim if
desired. To find the WR2 of a hub or web use the WR2 formula
for rims, substituting the hub or web outside diameter, inside
diameter, and width for D, d and F respectively. When arms are
used instead of a web an approximate WR2 value of the arms is
the total weight of the arms in pounds times the square of the
radius in feet from the shaft center line to the mid point of the
arms between hub and rim.
Engineering
Flywheels are used on some machines, for example air

compressors, to even out load pulsations. The following
formulas are useful in designing entire flywheels and flywheel
rims. A V-belt sheave may also be used as a flywheel eliminating
the need for a separate flywheel in the system.
Sleeve Bearings
Flywheel Formulas
SLEEVOIL
ENGINEERING
R = Distance from the axis of rotation to the center of

gravity of the body (feet).
2
F = Wv
gR
N = Revolutions per minute.
F = Centrifugal force tending to move the body

outward from the axis of rotation (pounds).
v = Velocity of the center of gravity of the body (feet

per second).
2
= WRN = .000341 WRN2
2933
W = Weight of body (pounds).
Keyword Index
g = Acceleration due to gravity (32.16 commonly).
Part Number Index
Centrifugal Force
B20-35
Plummer Blocks
ENGINEERING
Torque and Horsepower Equivalents
TORQUE
Sleeve Bearings
It is: a turning
moment or twisting
effort.
Is it expressed in
foot-pounds? or
pound-feet?
A foot-pound is the amount of energy expended

in lifting a one-pound mass a distance of one foot
against the pull of gravity
A pound-foot is the moment created by a force of

one pound applied to the end of a lever arm one
POUND-FEET
INDICATE TORQUE
FOOT-POUNDS
INDICATE ENERGY
Torque (in Pound-Inches)
=
Torque (in Pound-Feet)
Example:
63025 X HP
RPM
Force X Lever Arm (In Inches)
25 HP at 150 RPM = 10504 Pound-Inches Torque

2.5 HP at 150 RPM = 1050.4 Pound-Inches Torque
5252 X HP
RPM
Force X Lever Arm (In Feet)
For other values of RPM move decimal point in RPM values to the left or
right as desired, and in Torque values move to the right or left (opposite
way) the same number of places.
SLEEVOIL
Example:
25 HP at 150 RPM = 10504 Pound-Inches Torque
25 HP at 1.50 RPM = 1050400 Pound-Inches Torque
2.5 HP at 1.50 RPM = 105040 Pound-Inches Torque
Force = Working Load in Pounds.

FPM = Feet Per Minute.
RPM = Revolutions Per Minute.
Lever Arm = Distance from the Force to the center of rotation in Inches
or Feet.
HORSEPOWER
Take-Up Frames
Common Unit of Mechanical

power - (HP)
One HP is the rate of work
required to raise 33,000 pounds
one foot in one minute
Overhung Loads
An overhung load is a bending force imposed on a shaft due to
the torque transmitted by V-drives, chain drives and other power
transmission devices, other than flexible couplings.
Engineering
Most motor and reducer manufacturers list the maximum values

allowable for overhung loads. It is desirable that these figures be
compared with the load actually imposed by the connected drive.
Overhung loads may be calculated as follows:

O.H.L.

Part Number Index
Where HP
N
R
F
=
=
=
=
Weights of the drive components are usually negligible. The formula is

based on the assumption that the load is applied at a point equal to one
shaft diameter from the bearing face. Factor F depends on the type of
drive used:

1.00 for single chain drives.

1.3 for TIMING Belt Drives and Sync belt Drives.
F=

1.25 for spur or helical gear or double chain drives.

1.50 for V-belt drives.

2.50 for flat belt drives.
Example: Find the overhung load imposed on a reducer by a double
chain drive transmitting 7 hp @ 30 RPM. The pitch diameter of the
sprocket is 10; service factor is 1.3.
Solution:
63,000 X HP X F
NXR
Transmitted hp X service factor
RPM of shaft
Radius of sprocket, pulley. etc. (inches)
Factor (See chart to right)
O.H.L. = (63,000) (7 x 1.3) (1.25) = 4,780 lbs.

(30) (5)
Mathematical Equations
Keyword Index
To find circumference of a circle, multiply diameter by 3.1416.

To find diameter of a circle, multiply circumference by .31831.
To find area of a circle, multiply square of diameter by .7854.
To find area of a rectangle, multiply length by breadth.
To find area of a triangle, multiply base by 1/2 perpendicular height.
To find area of ellipse, multiply product of both diameters by .7854.
To find area of parallelogram, multiply base by altitude.
To find side of an inscribed square, multiply diameter by 0.7071 or
multiply circumference by 0.2251 or divide circumference by 4.4428.
To find side of inscribed cube, multiply radius of sphere by 1.1547.

To find side of an equal square, multiply diameter by .8862.
To find the surface of a sphere, square the diameter and multiply by
3.1416.
To find the volume of a sphere, cube the diameter and multiply by .5236.
A side of a square multiplied by 1.4142 equals diameter of its
circumscribing circle.
A side of a square multiplied by 4.443 equals circumference of its
circumscribing circle.
B20-36
B20-37
45
15
40
10
30
8
35
18
20
8.50
9
65
55
66
8
47
40
48
5
20-35
15-27
18-30
20-35
65
8
5-35
45=
33=
48-70
7-20
15-40
35-50
45
10-20
1-3
35-55
40-55
......
......
47
10-18
18-25
10-25
3-10
3-12
7-35
31-48
8-11
15-16
5
2
4
Plummer Blocks
10
10
10
10
10.20
10.20
10.30
10.60
10.60
......
......
16
16
16
16
15
15
17
17
9.1-14.8
......
7.7-14.3
10-14
15
15
15-18
17
15
16-17
8.5-13
10.6-16
19
17
23
25
31
31
15
16
29.80
25
25
22-25
22-25
28
29
......
6.50
6.50
6.50
6.50
6.50
Sleeve Bearings
Elongation%
SLEEVOIL
Modulus of
Elasticity
Millions
Take-Up Frames
Aluminum, Type 1100.0, Annealed

Aluminum, Type 1100-H18, Hard
Aluminum. Type 3003-0, Annealed
Aluminum, Type 5052-0, Annealed
Aluminum, Type 2014-T4, Heat Treated
Aluminum, Type C4A, Casting. Solution Heat Treat
Aluminum, Type S5C, As Die Cast
Brass, Admiralty, Annealed
Brass, Aluminum, Annealed
Brass, Cartridge, 30% Zn, Annealed
Brass, Cartridge, 30% Zn, Hard
Brass, Naval, Annealed
Brass, Naval, Leaded, Annealed
Brass, Red, 15% Zn, Annealed
Brass, Red, 15% Zn, Hard
Brass, Red, Leaded, Cast, Grade 4A
Brass, Red, Leaded, Cast, Grade 4B
Brass, Semi-Red, Leaded, Cast, Grade 5A
Brass, Semi-Red, Leaded, Cast, Grade 5B
Brass, Yellow, 35% Zn, Annealed
Brass, Yellow, 35% Zn, Hard
Bronze, Aluminum, As Cast
Bronze, Commercial, 10% Zn, Annealed
Bronze, Manganese, Annealed
Bronze, Phosphor, Annealed
Bronze, Tin, High Leaded, Cast
Bronze, Tin, Leaded, Cast
Copper, Beryllium, Annealed
Copper, Electrolytic, Tough Pitch, Annealed
Inconel, Cast
Inconel, S, Cast
Inconel, Shapes, Plate, Etc., Annealed
Inconel, X, Shapes, Plate, Etc., Annealed
Iron, Cast, Class 30
Iron, Cast, Class 35
Iron, Ingot, Hot Rolled
Iron, Malleable, Class 32510
Iron, Malleable, Class 35018
Iron, Nodular (Ductile) Class 60-45-10
Iron, Nodular (DuctiIe) Class 80-60-3
Iron, Pearlitic, Malleable
Iron, Wrought, Hot Rolled
Lead, Hard, Rolled
Magnesium Alloy, Extruded, ASTM MIA
Magnesium Alloy, Extruded, ASTM AZ6IA-F
Magnesium Alloy, Cast, ASTM MIB
Magnesium Alloy, Cast, ASTM AZ92A
Magnesium Alloy, Cast, ASTM AZ9IA
Stress in Thousands of Pounds per Sq. Inch

Tension
Tension
Compression
Shear
Ultimate
Yield Point
Ultimate
Ultimate
13
5
......
9
24
22
......
13
16
6
......
11
29
27
......
16
28
13
......
18
42
37
......
24
42
22
......
26
27
14
......
18
62
42
......
38
32
16
16
24
30
16
16
19
53
22
......
......
60
27
......
......
44
11
......
32
76
63
......
44
57
25
......
40
57
25
......
36
39
10
......
31
70
57
......
42
33-46
17-24
10-12
......
30-38
12-17
11-12
......
29-39
13-17
......
......
30-40
12-16
8-10
......
46
14
......
32
74
60
......
43
67-95
27-45
......
......
37
10
......
28
65
30
......
42 v
40-66
14-24
......
......
23-38
11-22
12-16
......
33-48
16-26
9-15
......
60-80
25-35v
......
50-60
32
10
......
22
65-90
......
......
......
90-120
80-100
......
......
80-100
30-45
......
......
110-130
45-65
......
......
30-34
......
115
44
35-40
......
125
43
44
23
......
......
50
33
90
46
55
37
90
51
60
45
120
......
80
60
160
......
60-90
40-70
......
......
34-47
23-24
......
......
4.0-4.6
......
......
......
26-28
23-28
10-13
16
40-45
22-32
15-21
21
14
4.50
......
11
24
14
......
19
36
23
......
20
Engineering
Metals and Alloys
Part Number Index
Table 32: Strength and Physical Properties of Various Metals
Keyword Index
ENGINEERING
Plummer Blocks
ENGINEERING
Table 32: Strength and Physical Properties of Various Metals
Metals and Alloys
Sleeve Bearings
SLEEVOIL
Monel, Cast
Monel, S, Cast
Monel, Shapes, Plate, Etc., Annealed
Monel, K, Shapes, Plate, Etc., Annealed
Muntz Metal, Cu 59.63%, Zn balance
Nickel, Cast .
Nickel, Silver, Annealed
Steel, Cast Carbon, Class 70,000 Normalized
Steel, Cast Low Alloy, Class 100,000, Normalized and Tempered
Steel, Cast Low Alloy, Class 120,000, Quenched and Tempered
Steel, Cast Low Alloy, Class 200,000, Quenched and Tempered
Steel, Sheets
Steel, Stainless, Austenitic, Types 304, 316
Steel, Stainless, Martensitic, Type 416
Steel, Structural, Bridge and Building, ASTM A7
Steel, Structural, High Strength, Low Alloy, ASTM A242
Zinc, Die Cast Alloy XXIII
When hardened, strength values are higher, elongation less
Compression yield point
Stress in Thousands of Pounds per Sq. Inch

Tension
Tension
Compression
Shear
Ultimate
Yield Point
Ultimate
Ultimate
65-90
32-45
......
......
120-145
80-130
......
......
70-85
25-45
......
......
90-105
40-65
......
26
54
21
......
40
50-65
15-30
......
......
49-63
18-30
......
......
70
38
......
......
100
68
......
......
120
95
......
......
200
170
......
......
48
25
......
......
85
35
......
......
75
40
......
......
60-72
33
33
45-54
63-70
42-50
42-50
47-53
41
......
60
31
Modulus of
Elasticity
Millions
23
24.20
26
25-45
15
21.50
17-18
30
29-30
29-30
29-30
29-30
28
29
29-30
29-30
......
Elongation%
20-50
1-4
35-50
35-55
45
15-30
35-60
28
20
16
5
18-27
55-60
30
21
18-24
10
Take-Up Frames
Table 33: Properties of Sections

Z = section modulus
k = radius of gyration
y = centroidal distance
A = area
I = moment of inertia
J = polar moment of inertia
Circle
Rectangle
A = bh
Engineering
bh
12
I=
k = 0.289h
h
y= 2
2
A= d
4
I=
bh2
Z=
6
d4
64
Z= d
32
d4
J = 32
k= d
4
d
y= 2
Part Number Index
Hollow Circle
Triangle
A = bh
2
I=
Keyword Index
Z=
bh3
36
(d4 - di4)
2
2
A = d (d - di ) J =
32
4
k = 0.236h
h
y=3
(d4 - d 4)
i
I=
64
bh2
24
Z = (d4 - di4)
32d
B20-38
k =
d
y=2
d2 - di2
16
Table 34: Coefficients of Friction f

Dry
Lubricated
....
....
....
....
....
....
....
....
....
....
....
....
....
....
0.18
....
....
....
....
....
....
....
....
....
0.6-0.7 *
....
0.08-0.25
0.11-0.23
....
....
....
....
....
....
....
0.07-0.08
0.11
....
....
0.20
0.22
....
0.35-0.40
0.30
0.22
0.15
0.29
0.43
....
....
0.10
0.10
....
....
....
0.07-0.08
0.06-0.10
....
....
0.13-0.36
0.07-0.20
....
1/0/00 3:11
....
....
....
....
....
0.12
....
0.16
0.07
0.5-0.7*
....
0.05-0.16
0.03-0.12
....
....
0.17
0.18
0.09-0.19
....
....
....
0.08-0.10
0.30-0.50
0.25
0.23
0.32
0.21
....
0.40
0.40-0.70
0.53
0.30-0.50
0.48
0.32
0.75-0.85
0.01
0.33-0.35
0.42
0.47
0.44
0.34
0.36
0.57
....
....
0.18
0.44
Sleeve Bearings
Lubricated
SLEEVOIL
Dry
1.35
0.30
....
....
....
....
....
....
1.10
1.05
....
0.60
....
....
....
....
0.85
0.25-1.0
0.94
0.50-0.80
1.10
0.50-0.60
0.62
0.54
0.8-0.9
0.03
0.42-0.70
0.78
0.61
0.51
....
0.53
0.74
0.76
0.65
0.19
....
Take-Up Frames
Aluminum on aluminum
Canvas belt on rubber lagging
Canvas belt, stitched, on steel
Canvas belt, woven, on steel
Cast iron on asbestos, fabric
brake material
Cast iron on brass
Cast iron on bronze
Cast iron on cast iron
Cast iron on copper
Cast iron on lead
Cast iron on leather
Cast iron on oak (parallel)
Cast iron on magnesium
Cast iron on steel, mild
Cast iron on tin
Cast iron on zinc
Earth on earth
Glass on glass
Hemp rope on wood
Nickel on nickel
Oak on leather (parallel)
Oak on oak (parallel)
Oak on oak (perpendicular)
Rubber tire on pavement
Steel on ice
Steel, hard, on babbit
Steel, hard. on steel, hard
Steel, mild, on aluminum
Steel, mild, on brass
Steel, mild, on bronze
Steel, mild, on copper
Steel, mild, on steel, mild
Stone masonry on concrete
Stone masonry on ground
Wrought iron on bronze
Wrought iron on wrought iron
* Wet pavement
Engineering
Material
Hardness Comparison Chart
Sliding
Gage
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Thickness in
Decimal Parts
of an Inch
.2813
.2656
.2391
.2242
.2092
.1943
.1793
.1644
.1495
.1345
.1196
.1046
.0897
.0747
.0673
.0598
.0538
.0478
.0418
Gage
No.
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Thickness in
Decimal Parts
of an Inch
.0359
.0329
.0299
.0269
.0239
.0209
.0179
.0164
.0149
.0135
.0120
.0109
.0102
.0094
.0086
.0078
0070
.0066
.0063
Part Number Index
Table 35: U.S. Standard Sheet Metal Gages
* Shaded area indicates values may vary depending on type of

ball used.
Example: A Brinell number of 245 is equal to 62 Rockwell
A, 100 Rockwell B, 23 Rockwell C, 37 Shore with a
tensile of approximately 120,000 psi.
B20-39
Keyword Index
Static
Plummer Blocks
ENGINEERING
Plummer Blocks
ENGINEERING
Trigonometric Formula
Sleeve Bearings
Table 36: Formulas for Finding Functions of Angles
SLEEVOIL
Side opposite
Hypotenuse
Side adjacent
Hypotenuse
Side opposite
Side adjacent
Side adjacent
Side opposite
Hypotenuse
Side adjacent
Hypotenuse
Side opposite
Table 38: To Find Angles and Sides of Right Angle

Triangles
= SINE
To Find:
= COSINE
C
= TANGENT
C
= COTANGENT
C
= SECANT
C
= COSECANT
C
C
Take-Up Frames
Table 37: Formulas for Finding Sides of Right Angle

Triangles with an Angle and Side Known
To find:
Length of
side opposite
To find:
Length of
side adjacent
Engineering
To find:
Length of
Hypotenuse
{
{
{
Hypotenuse x Sine
Hypotenuse Coscant
Side adjacent x Tangent
Side adjacent Cotangent
Hypotenuse X Cosine
Hypotenuse Secant
Side opposite X Cotangent
Side opposite Tangent
Side opposite X Cosecant
Side opposite Sine
Side adjacent X Secant
Side adjacent Cosine
B
B
B
B
B
To Find Angles
Formulas
c
=
Sine C
a
b
=
Cosine C
a
c
=
Tan. C
b
b
=
Cotan C
c
a
=
Secant C
b
a
=
Cosec. C
c
c
=
Sine B
a
c
=
Cosine B
a
b
=
Tan. B
c
c
=
Cotan. B
d
a
=
Secant B
c
a
=
Cosec. B
b
To Find:
To Find Angles
Formulas
c x Cosec. C
c x Secant B
b x Cosec. B
b x Secant C
+ c2
- c2
a x Sine B
a x Cos. C
c x Tan. B
c x Cot. C
a2 - b2
a x Cos. B
a x Sine C
b x Cot. B
b x Tan. C
--c
Sine C
c
Cosine B
b
Sine B
b
Cosine C
--a
Cosecant B
a
Secant C
c
Cotangent B
c
Tangent C
--a
Secant B
a
Cosecant C
b
Tangent B
b
Cotangent C
Part Number Index
Table 39: To Find Angles and Sides of Oblique Angle Triangle
Oblique Angle Triangle
Keyword Index
To find:
C
Known
A, B
a, B, A
a, A, C
Tan. A
a, C, b
A, C
Sin. B
b, A, a
To Find Angles and Sides of Oblique Angle Triangle

Formulas
To Find:
Known
180 (A + B)
A
B, C
a x Sin. B
Cos. A
a, b, c
Sin A
a x Sin. C
Sin. C
c, A, a
Sin. A
a x Sin. C
Cot. B
a, C, b
b - (a x Cos. C)
180 - (A + C)
c
b, C, B
b x Sin. A
----a
B20-40
Formulas
180- (B + C)
b2 + c2 - a2
2bc
c x Sin. A
a
a x Cosec. C
b
b x Sin. C x Cosec. B
-----
NEMA
C-FACE
143TC - 145TC
182TC - 184 TC
213TC - 215TC
254TC- 256TC
45
NEMA
Frame
48
56
56H
143T
145T
182
184
182T
184T
213
215
213T
215T
254U
256U
254T
256T
284U
286U
284T
286T
284TS
286TS
324U
326U
324T
326T
324TS
326TS
364U
365U
364T
365T
364TS
365TS
404U
405U
404T
405T
404TS
405TS
444U
445U
444T
445T
447T
449T
444TS
445TS
447TS
449TS
2F
N-W
Keyway
AA
3
3-1/2
3-1/2
3-1/2
3-1/2
4-1/2
4-1/2
4-1/2
4-1/2
5-1/4
5-1/4
5-1/4
5-1/4
6-1/4
6-1/4
6-1/4
6-1/4
7
7
7
7
7
7
8
8
8
8
8
8
9
9
9
9
9
9
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
11
2-1/8
2-7/16
2-7/16
2-7/16
2-3/4
3-3/4
3-3/4
3-3/4
3-3/4
4-1/4
4-1/4
4-1/4
4-1/4
5
5
5
5
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
6-1/4
6-1/4
6-1/4
6-1/4
6-1/4
6-1/4
7
7
7
7
7
7
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
2-3/4
3
5
4
5
4-1/2
5-1/2
4-1/2
5-1/2
5-1/2
7
5-1/2
7
8-1/4
10
8-1/4
10
9-1/2
11
9-1/2
11
9-1/2
11
10-1/2
12
10-1/2
12
10-1/2
12
11-1/4
12-1/4
11-1/4
12-1/4
11-1/4
12-1/4
12-1/4
13-3/4
12-1/4
13-3/4
12-1/4
13-3/4
14-1/2
16-1/2
14-1/2
16-1/2
20
25
14-1/2
16-1/2
20
25
11/32 SLOT
11/32
SLOT
11/32
11/32
13/32
13/32
13/32
13/32
13/32
13/32
13/32
13/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
13/16
1-1/2
1-7/8
1-7/8
2-1/4
2-1/4
2-1/4
2-1/4
2-3/4
2-3/4
3
3
3-3/8
3-3/8
3-3/4
3-3/4
4
4
4-7/8
4-7/8
4-5/8
4-5/8
3-1/4
3-1/4
5-5/8
5-5/8
5-1/4
5-1/4
3-3/4
3-3/4
6-3/8
6-3/8
5-7/8
5-7/8
3-3/4
3-3/4
7-1/8
7-1/8
7-1/4
7-1/4
4-1/4
4-1/4
8-5/8
8-5/8
8-1/2
8-1/2
8-1/2
8-1/2
4-3/4
4-3/4
4-3/4
4-3/4
5-13/16
8-9/16
8-9/16
8-9/16
8-9/16
9-7/8
9-7/8
9-7/8
9-7/8
11-1/4
11-1/4
11-1/4
11-1/4
13-1/4
13-1/4
13-1/4
13-1/4
14-3/4
14-3/4
14-3/4
14-3/4
14-3/4
14-3/4
16-11/16
16-11/16
16-11/16
16-11/16
16-11/16
16-11/16
18-1/2
18-1/2
18-1/2
18-1/2
18-1/2
18-1/2
21-5/16
21-5/16
21-5/16
21-5/16
21-5/16
21-5/16
23-3/8
23-3/8
23-3/8
23-3/8
23-5/8
23-5/8
23-3/8
23-3/8
23-5/8
23-5/8
5-5/8
7-9/32
7-9/32
7-9/32
7-9/32
9-1/4
9-1/4
9-1/4
9-1/4
10-1/2
10-1/2
10-1/2
10-1/2
13-1/4
13-1/4
13-1/4
13-1/4
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
14-7/8
17
17
17
17
17
17
19-1/2
19-1/2
19-1/2
19-1/2
19-1/2
19-1/2
22-1/2
22-1/2
22-1/2
22-1/2
22-1/2
22-1/2
25-1/4
25-1/4
25-1/4
25-1/4
26
26
25-1/4
25-1/4
26
26
1/2
5/8
5/8
7/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1-3/8
1-5/8
1-5/8
1-5/8
1-5/8
1-7/8
1-7/8
1-5/8
1-5/8
1-7/8
1-7/8
2-1/8
2-1/8
1-7/8
1-7/8
2-1/8
2-1/8
2-3/8
2-3/8
1-7/8
1-7/8
2-3/8
2-3/8
2-7/8
2-7/8
2-1/8
2-1/8
2-7/8
2-7/8
3-3/8
3-3/8
3-3/8
3-3/8
2-3/8
2-3/8
2-3/8
2-3/8
3/16x3/32
3/16x3/32
3/16x3/32
3/16x3/32
3/16x3/32
3/16x3/32
1/4x1/8
1/4x1/8
1/4x1/8
1/4x1/8
5/16x5/32
5/16x5/32
5/16x5/32
5/16x5/32
3/8x3/16
3/8x3/16
3/8x3/16
3/8x3/16
1/2x1/4
1/2x1/4
3/8x3/16
3/8x3/16
1/2x1/4
1/2x1/4
1/2x1/4
1/2x1/4
1/2x1/4
1/2x1/4
1/2x1/4
1/2x1/4
5/8x5/16
5/8x5/16
1/2x1/4
1/2x1/4
5/8x5/16
5/8x5/16
3/4x3/8
3/4x3/8
1/2x1/4
1/2x1/4
3/4x3/8
3/4x3/8
7/8x7/16
7/8x7/16
7/8x7/16
7/8x7/16
5/8x5/16
5/8x5/16
5/8x5/16
5/8x5/16
1-1/2
1-7/8
1-7/8
2-1/4
2-1/4
2-1/4
2-1/4
2-3/4
2-3/4
3
3
3-3/8
3-3/8
3-3/4
3-3/4
4
4
4-7/8
4-7/8
4-5/8
4-5/8
3-1/4
3-1/4
5-5/8
5-5/8
5-1/4
5-1/4
3-3/4
3-3/4
6-3/8
6-3/8
5-7/8
5-7/8
3-3/4
3-3/4
7-1/8
7-1/8
7-1/4
7-1/4
4-1/4
4-1/4
8-5/8
8-5/8
8-1/2
8-1/2
8-1/2
8-1/2
4-3/4
4-3/4
4-3/4
4-3/4
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4 NPT
4 NPT
B20-41
AB
AH
1-11/16
2-1/16
2-1/16
2-1/8
2-1/8
8-7/16
2-1/8
8-7/16
2-1/8
7-13/16
2-5/8
7-13/16
2-5/8
9-5/16
2-3/4
9-5/16
2-3/4
8-11/16
3-1/8
8-11/16
3-1/8
10-13/16 3-1/2
10-13/16 3-1/2
10-3/4
3-3/4
10-3/4
3-3/4
12-5/8
4-5/8
12-5/8
4-5/8
12-3/4
4-3/8
12-3/4
4-3/8
12-3/4
3
12-3/4
3
15-7/16
5-3/8
15-7/16
5-3/8
15-3/16
5
15-3/16
5
15-3/16
3-1/2
15-3/16
3-1/2
18
6-1/8
18
6-1/8
18-1/16
5-5/8
18-1/16
5-5/8
18-1/16
3-1/2
18-1/16
3-1/2
19-1/4
6-7/8
19-1/4
6-7/8
19-5/16
7
19-5/16
7
19-5/16
4
19-5/16
4
22-3/16
8-3/8
22-3/16
8-3/8
23-3/8
8-1/4
23-3/8
8-1/4
23-7/8
8-1/4
23-7/8
8-1/4
23-3/8
4-1/2
23-3/8
4-1/2
23-7/8
4-1/2
23-7/8
4-1/2
BA
Dimensions
2-3/4
3-1/2
4-1/4
4-3/4
AJ
AK
BA
Tap Size
3-3/4
5-7/8
5-7/8
5-7/8
5-7/8
5-7/8
5-7/8
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
9
9
9
9
9
9
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
14
14
14
14
14
14
14
14
14
14
3
4-1/4
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
10-1/2
10-1/2
10-1/2
10-1/2
10-1/2
10-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
12-1/2
16
16
16
16
16
16
16
16
16
16
2-1/2
2-3/4
2-3/4
2-1/4
2-1/4
2-3/4
2-3/4
2-3/4
2-3/4
3-1/2
3-1/2
3-1/2
3-1/2
4-1/4
4-1/4
4-1/4
4-1/4
4-3/4
4-3/4
4-3/4
4-3/4
4-3/4
4-3/4
5-1/4
5-1/4
5-1/4
5-1/4
5-1/4
5-1/4
5-7/8
5-7/8
5-7/8
5-7/8
5-7/8
5-7/8
6-5/8
6-5/8
6-5/8
6-5/8
6-5/8
6-5/8
7-1/2
7-1/2
7-1/2
7-1/2
7-1/2
7-1/2
7-1/2
7-1/2
7-1/2
7-1/2
1/4-20
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
Plummer Blocks
286T
326T
365T
405T
445T
449T
Sleeve Bearings
Drawings represent standard TEFC general purpose motors

Contact your local DODGE/Reliance Sales Office at 1-864-284-5700 for C
dimensions.
284T
324T
364T
404T
444T
447T
NEMA
KEYSEAT
SHAFT
DIMENSIONS
U
R
S
1-7/8 1-19/32
1/2
2-1/8 1-27/32
1/2
2-3/8 2-1/64
5/8
2-7/8 2-29/64
3/4
3-3/8
2-7/8
7/8
3-3/8
2-7/8
7/8
SLEEVOIL
Dimensions are for reference only
48
56
145T
184T
215T
256T
FRAME
Take-Up Frames
48
56
143T
182T
213T
254T
NEMA
KEYSEAT
SHAFT
DIMENSIONS
U
R
S
1/2
29/64
FLAT
5/8
33/64
3/16
7/8
49/64
3/16
1-1/8
63/64
1/4
1-3/8 1-13/64 5/16
1-5/8 1-13/32
3/8
Engineering
FRAME
Part Number Index
NEMA
QUICK REFERENCE
CHART
Keyword Index
ENGINEERING
Plummer Blocks
ENGINEERING
IEC QUICK REFERENCE CHART

Dimensions are for reference only
Drawings represent standard TEFC general purpose motors

Contact your local DODGE/Reliance Sales Office at 1-864-284-5700 for C dimensions.
Sleeve Bearings
SLEEVOIL
Take-Up Frames
FRAME
71
80
90
100
112
132
Engineering
Frame
Part Number Index

Keyword Index
71
80
90
100
112S
112M
132S
132M
160M
160L
180M
180L
200M
200L
225S
225M
250S
250M
280S
280M
280K
280H
L280H
125
140
160
190
190
216
216
254
254
279
279
318
318
356
356
406
406
457
457
457
457
457
B3 RIGID BASE
L10
L12
HD
100
188
100
125
208
112
140
229
114
301.8
140 301.8
140
336.6
178 336.6
210
399
254
399
241
436
279
436
267
486
305
486
286
545
311
545
311
616
349
616
368
677
419
677
500
677
630
677
635
677
50
56
63
71.4
71.4
88.9
88.9
108
108
121
121
133
133
149
149
168
168
190
190
190
190
202
SHAFT
E
D
40
19
50
24
60
28
60
28
60
28
80
38
80
38
110
42
110
42
110
48
110
48
110
55
110
55
140
60
140
60
140
65
140
65
140
75
140
75
140
75
140
75
205
75
N
110
130
130
180
180
180
230
230
250
250
250
250
300
300
350
350
D
14
19
24
28
28
38
M
130
165
165
215
215
215
265
265
300
300
300
300
350
350
400
400
G
11
15.5
20
24
24
33
KEY AND KEYSEAT DIMENSIONS

F
GD FRAME
D
5
5
160
37
6
6
180
48
8
7
200
55
8
7
225
60
8
7
250
70
10
8
280
80
B5 FLANGE
P
S
160
3,5
200
3,5
200
3,5
250
4
250
4
250
4
300
4
300
4
350
5
350
5
350
5
350
5
400
5
400
5
450
5
450
5
V
9,5
11,5
11,5
14
14
14
14
14
18
18
18
18
18
18
18
18
LEGEND
Metric Dimensions in MM
1 mm = .03937
B20-42
N
70
80
95
110
110
110
130
130
180
180
398
398
442
442
490
490
M
85
100
115
130
130
130
165
165
215
215
355
355
445
445
470
470
G
42
42.5
49
53
67.5
71
F
12
14
16
18
20
22
B14 FACE
P
105
120
140
160
160
160
200
200
250
250
40
40
50
50
50
50
GD
8
9
10
11
12
14
S
2.5
3
3
3.5
3.5
3.5
3.5
3.5
4
4
V
M6
M6
M8
M8
M8
M8
M8
M8
M12
M12
AC
143
143
163
175
243
243
286
286
324
324
398
398
442
442
490
490
600
600
650
650
650
650
650
GENERAL
AD
210
210
243
243
320
320
355
355
445
445
470
470
510
535
535
535
535
535
535
XX
13
13
13
19
32
32
32
32
40
40
40
40
50
50
50
50
63
63
63
63
63
63
63
INDEX-1
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-46
B17-46
B17-46
B4-82
B4-82
B4-82
B4-82
B4-82
B4-82
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
Part Number
013906
013907
013908
013909
013910
013916
013917
013918
019200
019201
019202
019203
019204
019210
019211
019212
019213
019214
019220
019221
019222
019223
019224
019230
019231
019232
019233
019234
019240
019241
019242
019243
019244
019250
019251
019252
019253
019254
019260
019261
019262
019263
019264
019270
019271
019272
019273
019274
019280
019281
019282
019283
019284
021218
021219
021220
22208
22209
22210
22211
Page
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-24, B19-25
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B19-27, B19-28
B17-46
B17-46
B17-46
B16-8
B16-8
B16-8
B16-8
Plummer Blocks
010057
010058
010059
010060
010061
010075
010076
010077
010078
010080
010081
010084
010085
010088
010089
010092
010093
010096
010097
010100
010104
010105
010107
010110
010112
010114
010117
010120
010123
010126
010127
010128
010129
010130
010131
012215
012216
012217
012302
012303
012340
012341
012342
012343
013497
013498
013499
013511
013512
013513
013514
013515
013519
013520
013900
013901
013902
013903
013904
013905
Page
Sleeve Bearings
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-40
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-38
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
Part Number
SLEEVOIL
006016
006019
006022
006025
006028
006031
006034
006037
006040
006043
006046
006049
006052
006055
006058
006061
006064
006067
006070
006073
006076
006079
006082
006102
006104
006107
006109
006110
006111
006113
006114
006115
006117
006118
006119
006120
006124
006125
006128
006129
006132
006136
006140
006144
006148
006152
010020
010021
010024
010028
010029
010032
010036
010039
010043
010048
010051
010054
010055
010056
Page
Take-Up Frames
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-42
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-37
B17-50
B17-50
B17-50
B17-50
B17-50
B17-51
B17-51
B17-51
B17-51
B17-51
B17-51
B17-37
B17-51
B17-51
B17-51
B17-51
B17-40
B17-40
B17-40
B17-40
B17-40
Part Number
Engineering
004060
004063
004066
004069
004072
004075
004078
004081
004084
004087
004090
004093
004096
004099
004102
004105
004108
004113
004114
004115
004116
005050
005051
005052
005053
005055
005056
005057
005058
005059
005060
005061
005062
005063
005064
005065
005066
005067
005068
005070
005073
005076
005079
005082
005085
005088
005091
005094
005097
005100
005117
005195
005198
005199
005201
006001
006004
006007
006010
006013
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
22213
22215
22218
22220
22222
22226
22228
22232
023000
023001
023002
023003
023004
023005
023006
023007
023008
023009
023010
023011
023012
023013
023014
023015
023016
023017
023018
023019
023020
023021
023022
023023
023024
023025
023026
023027
023028
023029
023030
023031
023032
023033
023040
023041
023042
023043
023044
023045
023046
023047
023048
023049
023050
023051
023052
023053
023054
023055
023056
023057
B16-8
B16-8
B16-8
B16-8
B16-8
B16-8
B16-8
B16-8
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
Page
Part Number
023058
023059
023060
023061
023062
023063
023064
023065
023066
023067
023068
023069
023070
023071
023072
023073
023074
023075
023076
023077
023078
023079
023080
023081
023082
023083
023084
023085
023086
023087
023088
023089
023090
023091
023092
023093
023094
023095
023096
023097
023098
023099
023100
023101
023102
023103
023104
023105
023106
023107
023108
023109
023110
023111
023112
023113
023114
023115
023116
023117
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-23
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-31
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
B10-27
Page
Part Number
023118
023119
023120
023121
023122
023123
023124
023125
023126
023127
023128
023129
023130
023131
023132
023133
023134
023135
023136
023137
023138
023139
023140
023141
023142
023143
023144
023145
023146
023147
023148
023149
023150
023151
023152
023153
023154
023155
023156
023157
023158
023159
023160
023161
023162
023163
023164
023165
023166
023167
023168
023170
023171
023172
023173
023174
023175
023176
023177
023178
INDEX-2
B10-27
B10-27
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-29
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-33
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
Page
Part Number
023179
023180
023181
023182
023183
023184
023186
023187
023188
023189
023190
023192
023193
023194
023195
023196
023197
023198
023199
023200
023201
023203
023204
023205
023206
023208
023209
023210
023212
023214
023215
023219
023220
023221
023223
023224
023227
023228
023230
023232
023234
023236
023237
023241
023242
023243
023245
023246
023249
023250
023252
023254
023256
023261
023263
023265
023266
023269
023270
023271
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-41
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-43
B10-47
B10-47
B10-47
B10-47
B10-47
B10-47
B10-47
B10-45
Page
INDEX-3
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-55
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-51, B10-57
B10-51, B10-57
B10-51, B10-57
B10-51, B10-57
B10-51, B10-57
B10-51, B10-57
B10-51, B10-57
B10-57
B10-51, B10-57
Part Number
023517
023518
023519
023520
023521
023522
023523
023524
023525
023526
023527
023528
023529
023530
023531
023532
023533
023534
023535
023536
023537
023538
023539
023540
023541
023542
023543
023545
023546
023547
023548
023550
023552
023553
023554
023556
023557
023558
023559
023560
023561
023564
023565
023566
023567
023568
023569
023570
023571
023584
023585
023586
023587
Page
B10-51, B10-57
B10-51, B10-57
B10-51, B10-57
B10-51, B10-53,
B10-57
B10-51, B10-53,
B10-57
B10-51, B10-53,
B10-57
B10-51, B10-57
B10-51, B10-53,
B10-57
B10-51, B10-53,
B10-57
B10-51, B10-57
B10-57
B10-51, B10-53,
B10-57
B10-51, B10-53,
B10-57
B10-53, B10-57
B10-53, B10-57
B10-53, B10-57
B10-53, B10-57
B10-53, B10-57
B10-53, B10-57
B10-53, B10-57
B10-53, B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-57
B10-61
B10-61
B10-61
B10-61
Plummer Blocks
023433
023435
023436
023439
023440
023443
023445
023447
023448
023449
023454
023460
023461
023462
023464
023465
023468
023469
023472
023474
023476
023477
023478
023480
023481
023482
023483
023484
023485
023486
023487
023488
023489
023490
023491
023492
023493
023494
023495
023496
023497
023498
023499
023500
023501
023502
023503
023504
023505
023506
023507
023508
023509
023510
023511
023512
023513
023514
023515
023516
Page
Sleeve Bearings
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-55
B10-55
B10-55
Part Number
SLEEVOIL
023343
023344
023345
023346
023347
023349
023350
023352
023353
023354
023356
023357
023360
023361
023362
023363
023364
023365
023366
023367
023368
023369
023376
023377
023378
023379
023380
023381
023382
023384
023385
023386
023387
023388
023389
023390
023391
023392
023393
023394
023396
023397
023399
023400
023401
023403
023404
023407
023408
023409
023410
023411
023412
023413
023414
023415
023416
023425
023431
023432
Page
Take-Up Frames
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-45
B10-49
B10-49
B10-49
B10-49
B10-49
B10-49
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
Part Number
Engineering
023272
023273
023274
023275
023276
023277
023278
023279
023280
023281
023282
023283
023284
023285
023286
023287
023288
023289
023290
023291
023292
023293
023294
023295
023296
023297
023298
023299
023300
023301
023302
023303
023304
023305
023306
023307
023308
023309
023310
023311
023312
023314
023316
023318
023322
023325
023327
023329
023330
023331
023332
023333
023334
023335
023337
023338
023339
023340
023341
023342
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
023588
023589
023590
023603
023604
023605
023606
023607
023608
023609
023610
023611
023612
023613
023614
023615
023616
023620
023621
023622
023623
023624
023625
023626
023627
023628
023629
023630
023631
023632
023633
023634
023635
023636
023637
023638
023639
023640
023641
023690
023691
023692
023693
023694
023695
023700
023701
023702
023703
023704
023705
023706
023707
023708
023709
023710
023711
023712
023713
023714
Page
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61, B10-63
B10-61, B10-63
B10-61, B10-63
B10-61, B10-63
B10-61, B10-63
B10-61, B10-63
B10-61, B10-63
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-75
B10-25
B10-25
B10-25
B10-25
B10-25
B10-25
B10-77
B10-77
B10-77
B10-77
B10-77
B10-77
B10-77
B10-77
B10-77
B10-77
B10-77
B10-77
B10-77
B10-77
B10-77
Part Number
023715
023795
023796
023797
023798
023799
023800
023801
032867
032868
032871
032872
032874
032875
032876
032877
032878
032879
032881
032882
032886
032887
032923
032937
032940
032941
032942
032943
032945
032946
032947
032949
032950
032951
032953
032954
032955
032956
032957
032959
032960
032970
032971
032972
032973
032975
032976
032977
032979
032980
032981
032983
032984
032985
032986
032987
032989
032990
033077
033085
B10-77
B10-65
B10-65
B10-65
B10-65
B10-65
B10-65
B10-65
B2-76
B2-76
B2-76
B2-76
B2-76
B2-76
B2-76
B2-76
B2-76
B2-76
B2-76
B2-76
B2-76
B2-76
B17-15
B17-15
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-10
B17-16
Page
Part Number
033086
033087
033088
033089
033090
033091
033092
033093
033094
033095
033096
033097
033098
033185
033186
033187
033188
033189
033190
033191
033192
033193
033194
033195
033196
033197
033198
033200
033201
033202
033203
033204
033205
033206
033207
033208
033209
033210
033211
033212
033213
033214
033215
033216
033217
033218
033247
033251
033260
033261
033262
033263
033264
033265
033266
033267
033268
033269
033270
033271
INDEX-4
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-14
B17-14
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
Page
Part Number
033272
033273
033274
033275
033276
033277
033278
033321
033323
033347
033351
033475
033480
033485
033490
033500
033505
033510
033515
033525
033530
033535
033540
033585
033586
033587
033588
033589
033590
033591
033592
033593
033594
033595
033596
033597
033598
033599
033600
033601
033602
033610
033611
033612
033613
033614
033615
033616
033617
033618
033619
033620
033621
033622
033623
033624
033625
033626
033627
033667
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-15
B17-15
B17-14
B17-14
B17-14
B17-14
B17-14
B17-14
B17-14
B17-14
B17-14
B17-14
B17-14
B17-14
B17-14
B17-14
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-10
Page
INDEX-5
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-15
B17-15
B17-15
B17-15
B17-15
B17-15
B17-30
B17-30
B17-30
B17-30
B17-30
B17-30
B17-30
B17-30
B17-29
B17-29
B17-29
B17-29
B17-29
B17-29
B17-29
B17-29
B17-29
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B19-44
B19-44
B19-44
B19-44
B19-44
Part Number
034025
034030
034031
034032
034033
034034
034035
034117
034218
034221
034225
034226
034227
034228
034229
034230
034231
034232
034233
034234
034235
034236
034237
034238
034239
034240
034241
034242
034243
034244
034245
034246
034247
034248
034249
034250
034251
034252
034253
034254
034255
034256
034257
034258
034259
034260
034261
034262
034263
034264
034265
034266
034267
034268
034269
034270
034271
034272
034273
034274
Page
B19-44
B17-54, B19-44
B17-54, B19-44
B17-54, B19-44
B17-54, B19-44
B17-54, B19-44
B17-54, B19-44
B17-26
B17-16
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-12
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-16
B17-18
B17-18
Plummer Blocks
033916
033917
033918
033919
033920
033921
033922
033923
033924
033925
033926
033927
033928
033929
033930
033931
033932
033933
033934
033937
033938
033939
033940
033952
033953
033954
033955
033960
033961
033962
033963
033964
033965
033966
033967
033968
033974
033977
033978
033979
033980
033982
033983
033984
033986
033987
033988
033990
033991
033992
033993
033994
033996
033997
033998
034020
034021
034022
034023
034024
Page
Sleeve Bearings
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-15
B17-15
B17-15
B17-15
B17-15
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-31
B17-31
B17-31
B17-31
B17-31
B17-31
B17-31
B17-31
B17-15
B17-31
B17-31
B17-31
B17-31
B17-31
B17-31
B17-31
B17-31
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
Part Number
SLEEVOIL
033844
033845
033846
033847
033848
033849
033850
033851
033852
033853
033854
033855
033856
033862
033863
033867
033868
033869
033870
033871
033872
033873
033874
033875
033876
033877
033878
033879
033880
033881
033882
033883
033884
033885
033886
033887
033888
033890
033891
033892
033893
033894
033895
033896
033897
033899
033900
033901
033902
033903
033904
033905
033906
033907
033910
033911
033912
033913
033914
033915
Page
Take-Up Frames
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-10
B17-32
B17-32
B17-32
B17-32
B17-33
B17-33
B17-33
B17-33
B17-24
B17-24
B17-24
B17-24
B17-24
B17-24
B17-24
B17-24
B17-24
B17-24
B17-24
B17-24
B17-24
B17-24
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
Part Number
Engineering
033668
033669
033670
033672
033673
033674
033676
033677
033678
033680
033681
033682
033683
033684
033686
033687
033688
033692
033693
033694
033695
033696
033697
033698
033699
033739
033740
033741
033742
033743
033744
033745
033750
033751
033752
033753
033754
033755
033756
033810
033811
033812
033813
033814
033815
033816
033817
033818
033819
033820
033821
033822
033823
033824
033825
033826
033840
033841
033842
033843
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
034275
034276
034277
034278
034279
034280
034281
034282
034283
034284
034285
034286
034287
034288
034289
034290
034291
034292
034293
034294
034295
034296
034297
034298
034299
034300
034303
034304
034305
034306
034307
034308
034309
034310
034313
034314
034315
034316
034317
034318
034319
034320
034321
034322
034323
034324
034325
034326
034327
034328
034329
034330
034331
034332
034438
034439
034440
034441
034442
034443
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-18
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-20
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-22
B17-28
B17-28
B17-28
B17-28
B17-28
B17-28
Page
Part Number
034444
034445
034446
034447
034448
034449
034450
034451
034452
034453
034454
034455
034456
034457
034458
034459
034460
034461
034462
034463
034464
034465
034466
034467
034468
034469
034470
034471
034472
034473
034525
034596
034597
034598
034599
034700
034701
034702
034703
034704
034705
034706
034709
034710
034711
034712
034713
034714
034715
034716
034717
034718
034719
034720
034721
034722
034725
034726
034727
034728
B17-28
B17-28
B17-28
B17-28
B17-28
B17-28
B17-28
B17-28
B17-28
B17-28
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-26
B17-12
B17-12
B17-12
B17-12
B2-71
B2-71
B2-71
B2-71
B2-71
B2-71
B2-71
B2-71
B2-72
B2-72
B2-72
B2-72
B2-72
B2-72
B2-75
B2-75
B2-75
B2-75
B2-75
B2-75
B2-75
B2-75
B2-73
B2-73
B2-73
Page
Part Number
034729
034730
034731
034732
034735
034736
034737
034738
034739
034740
034741
034748
034749
034750
034751
034752
034754
034755
034756
034757
034758
034759
034760
034761
034762
034763
034765
034766
034767
034768
034769
034770
034772
034773
034774
034775
034776
035025
035026
035027
035028
035029
035030
035031
035032
035033
035034
035035
035036
035083
035107
035108
035116
035117
035183
035185
035417
035418
035431
035432
INDEX-6
B2-73
B2-73
B2-73
B2-73
B2-73
B2-74
B2-74
B2-74
B2-74
B2-74
B2-74
B2-71
B2-71
B2-71
B2-71
B2-71
B2-71
B2-72
B2-72
B2-72
B2-72
B2-75
B2-75
B2-75
B2-75
B2-75
B2-75
B2-73
B2-73
B2-73
B2-73
B2-73
B2-73
B2-74
B2-74
B2-74
B2-74
B17-55
B17-55
B17-55
B17-55
B17-55
B17-55
B17-56
B17-56
B17-56
B17-56
B17-56
B17-56
B17-56
B17-55
B17-55
B17-56
B17-56
B15-85
B15-85
B15-85
B15-85
B15-95
B15-95
Page
Part Number
035433
035437
035438
035439
035744
035745
035747
035748
035749
035750
035751
035752
035762
035763
035764
035765
035766
035767
035768
035769
035770
035771
035772
035773
035774
035775
035776
035777
035778
035779
035780
035781
035782
035783
035784
035785
035786
035787
035788
035789
035790
035791
035915
035916
035917
035929
035930
035931
035943
035944
035945
035946
036054
036116
036118
036119
036120
036121
036180
036181
Page
B15-95
B15-112
B15-112
B15-112
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-50
B15-50
B15-50
B15-50
B15-50
B15-50
B15-50
B15-50
B15-50
B15-51
B15-51
B15-51
B15-51
B15-50
B15-50
B15-50
B15-50
B15-50
B15-50
B15-51
B15-51
B15-51
B15-51
B15-51
B15-51
B15-51
B15-51
B15-51
B15-51
B15-51
B15-112
B15-112
B15-112
B15-95
B15-95
B15-95
B15-85
B15-85
B15-85
B15-85
B11-17
B11-17
B11-17
B11-17
B11-17
B11-17
B19-45
B19-45
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-59, B10-63
B10-59, B10-63
B10-59, B10-63
B10-59, B10-63
B10-59, B10-61,
B10-63
037637 B10-59, B10-61,
B10-63
037638 B10-59, B10-61,
B10-63
037639 B10-59, B10-61,
B10-63
037640 B10-59, B10-61,
B10-63
037641 B10-59, B10-61,
B10-63
INDEX-7
Part Number
037642
037643
037644
037645
037646
037647
037648
037649
037650
037651
037652
037653
037654
037655
037656
037657
037658
037659
037660
037673
037674
037681
037682
037683
037684
037685
037686
037687
037688
037689
037690
037850
037851
037852
037853
037854
037855
037856
037857
037901
037902
037903
037904
037905
037906
037907
037908
037909
037910
037911
037912
037913
037914
037915
037916
037917
037918
037919
Page
B10-59, B10-61,
B10-63
B10-59, B10-61,
B10-63
B10-61, B10-63
B10-61, B10-63
B10-61, B10-63
B10-61, B10-63
B10-61, B10-63
B10-61, B10-63
B10-64
B10-64
B10-64
B10-64
B10-64
B10-64
B10-64
B10-64
B10-64
B10-64
B10-64
B10-64
B10-64
B10-66
B10-66
B10-66
B10-66
B10-66
B10-66
B10-66
B10-66
B10-66
B10-66
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
Plummer Blocks
037588
037589
037590
037591
037592
037593
037594
037595
037596
037597
037598
037599
037600
037601
037602
037603
037604
037605
037606
037607
037608
037609
037610
037611
037612
037613
037614
037615
037616
037617
037618
037619
037620
037621
037622
037623
037624
037625
037626
037627
037628
037629
037630
037631
037632
037633
037634
037635
037636
Page
Sleeve Bearings
B15-84
B15-84
B15-84, B15-85
B15-84, B15-85
B15-85
B15-85
B15-85
B15-85
B15-84
B15-84
B15-84
B15-84
B15-84
B15-84
B15-84, B15-85
B15-84, B15-85
B15-85
B15-85
B15-84
B15-84
B15-84
B15-84
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-61, B10-67
B10-61
B10-61, B10-67
B10-61, B10-67
B10-61, B10-67
B10-61, B10-67
B10-61, B10-67
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-61
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
B10-59
Part Number
SLEEVOIL
037434
037435
037436
037437
037438
037439
037440
037441
037442
037443
037444
037446
037447
037448
037449
037450
037451
037452
037461
037462
037464
037465
037540
037541
037542
037543
037544
037545
037546
037547
037548
037549
037550
037551
037552
037553
037554
037555
037556
037557
037558
037559
037560
037561
037562
037563
037564
037565
037566
037567
037568
037569
037580
037581
037582
037583
037584
037585
037586
037587
Page
Take-Up Frames
B19-45
B19-45
B19-45
B19-45
B19-45
B19-45
B19-45
B19-45
B19-45
B19-45
B19-45
B19-45
B19-45
B19-45
B19-45
B19-45
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B19-21
B5-20
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B17-48
B15-84
B15-84
B15-84, B15-85
B15-85
B15-85
B15-85
B15-84
B15-84
Part Number
Engineering
036182
036183
036184
036185
036186
036187
036188
036193
036194
036196
036197
036198
036199
036200
036270
036274
036350
036351
036352
036353
036354
036355
036356
036357
036358
036359
036360
036361
036362
036363
036364
036365
036366
036367
036567
037001
037002
037003
037004
037005
037006
037007
037009
037010
037011
037012
037013
037017
037020
037022
037024
037026
037426
037427
037428
037429
037430
037431
037432
037433
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
037920
037921
037922
037923
037924
037925
037926
037927
037928
037929
037930
037931
037932
037933
037934
037935
037936
037937
037938
037939
037940
038060
038061
038062
038063
038064
038070
038071
038072
038073
038074
038075
038076
038077
038078
038109
038110
038111
038112
038113
038114
038115
038116
038117
038118
038119
038200
038201
038202
038203
038204
038205
038206
038207
038208
038209
038210
038211
038212
038213
B14-54
B14-54
B14-54
B14-54
B14-54
B14-102
B14-102
B14-102
B14-102
B14-102
B14-102
B14-102
B14-102
B14-102
B14-102
B14-102
B14-102
B14-102
B14-102
B14-102
B14-102
B19-12
B19-12
B19-12
B19-12
B19-12
B19-12
B19-12
B19-12
B19-12
B19-12
B19-12
B19-12
B19-12
B19-12
B19-8
B19-8
B19-8
B19-8
B19-8
B19-8
B19-8
B19-8
B19-8
B19-8
B19-8
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
Page
Part Number
038214
038215
038216
038217
038218
038219
038220
038221
038222
038223
038224
038225
038226
038227
038228
038229
038910
038911
038912
038913
038914
038915
038916
038917
038918
038919
038920
038921
038922
038923
038924
038925
038926
038927
038928
038929
038930
038932
039002
039003
039004
039005
039006
039007
039008
039009
039010
039011
039012
039013
039014
039015
039016
039017
039018
039019
039043
039044
039073
039084
Page
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-11
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
B19-31, B19-32
Part Number
039097
039100
039101
039102
039103
039104
039105
039106
039107
039108
039109
039110
039111
039112
039113
039114
039115
039116
039117
039118
039119
039120
039121
039122
039123
039124
039125
039126
039127
039128
039129
039138
039141
039142
039147
039148
039151
039152
039155
039156
039159
039160
039163
039164
039165
039166
039167
039168
039169
039170
039171
039172
039173
039174
039175
039177
039179
039181
039183
039185
INDEX-8
Page
B19-31, B19-32
B15-48
B15-48
B15-48
B15-48
B15-48
B15-48
B15-48
B15-48
B15-48
B15-49
B15-49
B15-49
B15-49
B15-48
B15-48
B15-48
B15-48
B15-48
B15-48
B15-49
B15-49
B15-49
B15-49
B15-49
B15-49
B15-49
B15-49
B15-49
B15-49
B15-49
B15-33
B15-33
B15-33
B15-33
B15-33
B15-33
B15-33
B15-33
B15-33
B15-33
B15-33
B15-33
B15-34
B15-34
B15-34
B15-34
B15-34
B15-34
B15-34
B15-34
B15-34
B15-34
B15-34
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
Part Number
Page
039187 B15-101
039189 B15-101
039191 B15-101
039193 B15-101
039195 B15-101
039197 B15-101
039199 B15-101
039201 B15-101
039203 B15-101
039205 B15-101
039207 B15-101
039209 B15-101
039211 B15-101
039213 B15-101
039215 B15-101
039217 B15-33, B15-35
039218 B15-33, B15-35
039219 B15-33, B15-35
039220 B15-33, B15-35
039221 B15-33, B15-35
039222 B15-33, B15-35
039223 B15-33, B15-35
039224 B15-33, B15-34,
B15-35
039225 B15-34, B15-35
039226 B15-34, B15-35
039227 B15-34, B15-35
039228 B15-34, B15-35
039289 B15-103, B15-106,
B15-113, B15-119
039290 B15-119
039291 B15-103, B15-106,
B15-113, B15-119
039292 B15-103, B15-106,
B15-113, B15-119
039297 B15-103, B15-106,
B15-115, B15-119
039355 B15-112
039356 B15-112
039357 B15-112
039358 B15-112
039359 B15-112
039360 B15-112
039361 B15-112
039362 B15-112
039371 B15-112
039372 B15-112
039373 B15-112
039374 B15-112
039375 B15-112
039376 B15-112
039377 B15-114
039378 B15-114
039380 B15-114
039381 B15-114
039382 B15-114
039383 B15-114
039384 B15-114
039385 B15-114
039386 B15-114
039676
039677
039678
039679
039680
039681
039682
039684
039686
039688
039690
039692
039694
039696
039698
039700
039702
039704
039706
039708
039710
039711
039712
039713
039714
039715
039716
039717
039719
039721
039723
039725
039727
039729
039731
039733
039735
039737
039739
039741
039853
039854
039855
039856
039857
039858
039859
039860
039861
039862
039863
039864
039865
INDEX-9
B15-112
B15-114
B15-114
B15-114
B15-114
B15-114
B15-114
B15-114
B15-114
B15-114
B15-95
B15-35, B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-27, B15-32,
B15-41
B15-27, B15-32,
B15-41
B15-27, B15-32,
B15-41
B15-27, B15-32,
B15-41, B15-95
B15-27, B15-32,
B15-41
B15-27, B15-32,
B15-41, B15-103,
B15-106, B15-113,
B15-119
B15-27, B15-32,
B15-41
B15-29, B15-32,
B15-41, B15-54,
B15-95
B15-29, B15-33,
B15-41
B15-29, B15-33,
B15-41, B15-54
B15-29, B15-33,
B15-41
B15-29, B15-33,
B15-41, B15-95,
B15-103, B15-106,
B15-115, B15-119
B15-29, B15-33,
B15-41, B15-54,
B15-95
B15-29, B15-33,
B15-41
Part Number
039866
039867
040001
040002
040003
040004
040005
040006
040007
040008
040009
040010
040011
040012
040013
040014
040015
040016
040017
040018
040019
040020
040021
040022
040023
040024
040025
040026
040027
040028
040029
040030
040031
040032
040033
040034
040681
040682
040683
040684
040685
040687
040689
040690
Page
B15-29, B15-33,
B15-41, B15-54,
B15-95
B15-29, B15-33,
B15-41
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B15-29, B15-41,
B15-69, B15-95,
B15-103, B15-106,
B15-115, B15-119
B15-29, B15-41,
B15-69, B15-103,
B15-106, B15-115,
B15-119
B15-29, B15-41,
B15-69, B15-95,
B15-103, B15-106
B15-29, B15-41,
B15-69, B15-103,
B15-106
B15-29, B15-31,
B15-41, B15-69
B15-106
B15-31
B15-29, B15-33,
B15-41, B15-69
Plummer Blocks
039743
039745
039747
039749
039750
039751
039752
039753
039754
039755
039760
039762
039764
039766
039768
039770
039772
039774
039776
039780
039781
039782
039783
039784
039785
039852
Page
Sleeve Bearings
039670
039671
039672
039673
039674
039675
B15-33
B15-33
B15-33
B15-33
B15-28
B15-32, B15-35
B15-32, B15-35
B15-32, B15-35
B15-32, B15-35
B15-26, B15-35,
B15-48, B15-50,
B15-52, B15-77
B15-32, B15-35
B15-32, B15-35
B15-32, B15-35
B15-32, B15-35
B15-32, B15-35
B15-32, B15-33,
B15-35
B15-32, B15-33,
B15-35
B15-33, B15-35
B15-33, B15-35
B15-33, B15-35
B15-33, B15-35
B15-28, B15-35
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-101
B15-112
B15-112
B15-112
B15-112
B15-112
B15-112
B15-112
B15-112
B15-112
B15-112
B15-112
B15-112
B15-112
Part Number
SLEEVOIL
039602
039603
039604
039605
039606
039665
039666
039667
039668
039669
Page
Take-Up Frames
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-95
B15-32, B15-35
B15-32, B15-35
B15-103, B15-106,
B15-113, B15-119
039530 B15-27, B15-32,
B15-41, B15-54,
B15-95
039538 B15-27, B15-32,
B15-41, B15-54,
B15-95
039544 B15-32, B15-35
039545 B15-32, B15-35
039553 B15-95
039568 B15-103, B15-106,
B15-113
039575 B15-32
039576 B15-32
039577 B15-32
039578 B15-32
039579 B15-26
039580 B15-32
039581 B15-32
039582 B15-32, B15-95
039583 B15-32, B15-95
039584 B15-32
039585 B15-32
039586 B15-32
039587 B15-32
039588 B15-32
039589 B15-32
039590 B15-32
039591 B15-32
039592 B15-32
039593 B15-32
039594 B15-32
039595 B15-32
039596 B15-32
039597 B15-33
039598 B15-33
039599 B15-33
039600 B15-33
039601 B15-33
Part Number
Engineering
039404
039405
039406
039407
039413
039414
039415
039416
039417
039419
039420
039421
039422
039423
039424
039425
039426
039427
039508
039509
039515
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
040691
040700
040701
Sleeve Bearings
040702
040703
SLEEVOIL
040704
040705
Take-Up Frames
040706
040707
040708
Engineering
040709
040710
Part Number Index
040711
040712
Page
Keyword Index
B15-41, B15-69,
B15-103, B15-115
B15-27, B15-41,
B15-48, B15-50,
B15-113, B15-119
B15-27, B15-41,
B15-48, B15-50,
B15-95, B15-113,
B15-119
B15-27, B15-41,
B15-48, B15-50,
B15-69, B15-95,
B15-113, B15-119
B15-27, B15-41,
B15-48, B15-50,
B15-69, B15-95,
B15-113, B15-119
B15-27, B15-41,
B15-48, B15-50,
B15-69, B15-95
B15-27, B15-41,
B15-48, B15-50,
B15-69, B15-95,
B15-103, B15-106,
B15-113, B15-119
B15-27, B15-41,
B15-48, B15-49,
B15-50, B15-51,
B15-69, B15-95,
B15-103, B15-106,
B15-113, B15-119
B15-27, B15-41,
B15-49, B15-51,
B15-69
B15-29, B15-41,
B15-49, B15-51,
B15-69, B15-95
B15-29, B15-41,
B15-49, B15-51,
B15-69, B15-103,
B15-106, B15-115,
B15-119
B15-29, B15-41,
B15-49, B15-51,
B15-69, B15-95,
B15-103, B15-106,
B15-115, B15-119
B15-29, B15-41,
B15-49, B15-51,
B15-69, B15-95,
B15-103, B15-106,
B15-115, B15-119
B15-29, B15-41,
B15-49, B15-51,
B15-69, B15-95,
B15-103, B15-106,
B15-115, B15-119
Part Number
040713
040714
040830
040838
040850
040890
040891
040892
040893
040894
040895
040896
040897
040898
040899
040900
040901
040918
040919
040995
041064
041065
041066
041067
041068
041069
041070
041071
041072
041082
Page
B15-29, B15-41,
B15-69, B15-95,
B15-103, B15-106,
B15-115, B15-119
B15-29, B15-41,
B15-69, B15-95
B15-85, B15-93
B15-101, B15-111
B15-125
B15-27, B15-32,
B15-41, B15-69
B15-27, B15-32,
B15-41, B15-69
B15-27, B15-32,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69
B15-41, B15-69,
B15-84, B15-91
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-27, B15-32,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-101, B15-111,
B15-114, B15-124
B15-101, B15-111,
B15-114, B15-124
B15-101, B15-111,
B15-114, B15-124
B15-101, B15-111,
B15-114, B15-124
B15-101, B15-111,
B15-114, B15-124
B15-101, B15-111
B15-101, B15-111
B15-101, B15-111,
B15-114, B15-124
B15-101, B15-111,
B15-114, B15-124
B15-31, B15-34,
B15-41, B15-69
Part Number
041161
041172
041173
041174
041175
041176
041177
041178
041179
041180
041181
041182
041183
041184
041185
041186
041213
041628
041646
041685
041686
041687
041688
041860
041861
041862
041863
041864
041865
041866
041867
041868
041869
041870
041871
041872
041873
041874
041875
041876
041877
041878
041879
041880
041881
041882
041883
041884
041885
041886
041887
041987
042001
042002
042003
042004
042005
INDEX-10
Page
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-30
B15-29, B15-33,
B15-41, B15-69
B15-41
B15-41
B15-27, B15-32,
B15-41, B15-69
B15-27, B15-32,
B15-41, B15-69
B15-26
B15-26
B15-26
B15-26
B15-26
B15-26
B15-26
B15-26
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-28
B15-30
B15-45, B15-125
B15-64
B15-64
B15-64
B15-64
B15-64
Part Number
042006
042007
042008
042009
042010
042011
042015
042016
042017
042019
042020
042021
042022
042023
042024
042025
042028
042029
042030
042031
042032
042036
042037
042038
042039
042040
042049
042085
042088
042089
042090
042091
042092
042093
042094
042095
042098
042100
042103
042106
042109
042111
042114
042116
042119
042121
042124
042126
042129
042131
042134
Page
B15-64
B15-64
B15-64
B15-64
B15-64
B15-64
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-103, B15-106
B15-103, B15-106
B15-65
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-84, B15-91
B15-84, B15-91
B15-84, B15-91
B15-84, B15-91
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-113, B15-119
B15-103, B15-106,
B15-113, B15-119
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-103, B15-106,
B15-115, B15-119
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
042249
042270
042271
042272
042273
042274
042282
042283
042284
042303
042304
042305
042306
042307
042308
042309
042315
042316
042335
042368
042369
042370
042371
042372
042373
042374
042375
042376
042377
042378
042379
042382
042383
042384
042385
042386
042387
042388
042389
042390
042391
042392
042393
042394
042395
042396
042397
042400
042401
042402
042403
042404
042405
042406
042407
042408
042409
042410
042411
042412
042413
042414
042415
042511
042512
042513
042514
042515
INDEX-11
B15-61
B15-61
B15-61
B15-61
B15-26
B15-26
B15-61
B15-61
B15-61
B15-61
B15-28
B15-61
B15-61
B15-61
B15-28
B15-61
B15-61
B15-61
B15-28
B15-61
B15-30
B15-30
B15-30
B15-61
B15-30
B15-30
B15-61
B15-30
B15-61
B15-30
B15-30
B15-61
B15-61
B15-61
B15-61
B15-61
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-31, B15-34,
B15-41, B15-69
B15-27, B15-32,
B15-41, B15-50,
B15-52, B15-69,
B15-95, B15-113,
B15-119
B15-27, B15-32,
B15-41, B15-50,
B15-52, B15-69,
B15-95
B15-27, B15-32,
B15-41, B15-50,
B15-52, B15-54,
B15-69, B15-95
B15-27, B15-32,
B15-41, B15-50,
B15-69
Part Number
042516
042517
042518
042519
042520
042521
042522
042523
042524
042525
042526
042527
042528
042529
042530
Page
B15-27, B15-32,
B15-41, B15-50,
B15-52, B15-69,
B15-95
B15-27, B15-32,
B15-41, B15-50,
B15-69
B15-27, B15-32,
B15-41, B15-50,
B15-52, B15-54,
B15-69, B15-95
B15-27, B15-32,
B15-41, B15-51,
B15-69, B15-103,
B15-106, B15-113,
B15-119
B15-27, B15-32,
B15-41, B15-51,
B15-52, B15-69
B15-29, B15-32,
B15-41, B15-51,
B15-52, B15-54,
B15-69, B15-95
B15-29, B15-33,
B15-41, B15-51,
B15-69
B15-29, B15-33,
B15-41, B15-51,
B15-52, B15-54,
B15-69
B15-29, B15-33,
B15-41, B15-51,
B15-69
B15-29, B15-33,
B15-41, B15-51,
B15-69, B15-95,
B15-103, B15-106,
B15-115, B15-119
B15-29, B15-33,
B15-41, B15-51,
B15-54, B15-69,
B15-95
B15-29, B15-33,
B15-41, B15-51,
B15-69, B15-103,
B15-106, B15-115,
B15-119
B15-29, B15-33,
B15-41, B15-51,
B15-54, B15-69,
B15-95, B15-103,
B15-106, B15-115,
B15-119
B15-29, B15-33,
B15-41, B15-51,
B15-69
B15-29, B15-33,
B15-41, B15-69,
B15-95
Plummer Blocks
042416
042417
042420
042421
042422
042423
042424
042425
042428
042430
042431
042432
042433
042436
042438
042439
042440
042443
042445
042446
042447
042448
042449
042450
042453
042454
042455
042458
042460
042463
042464
042465
042468
042469
042472
042477
042510
Page
Sleeve Bearings
042381
B15-27, B15-32,
B15-41, B15-54,
B15-69
B15-27, B15-32,
B15-41, B15-69
B15-27, B15-32,
B15-41, B15-54,
B15-69
B15-29, B15-32,
B15-41, B15-54,
B15-69
B15-29, B15-33,
B15-41, B15-54,
B15-69
B15-29, B15-33,
B15-41, B15-54,
B15-69
B15-29, B15-33,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-54,
B15-69
B15-29, B15-41,
B15-69
B15-29, B15-33,
B15-41, B15-54,
B15-69
B15-29, B15-33,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-54,
B15-69
B15-29, B15-33,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-41, B15-69
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
B15-26
B15-61
B15-61
B15-26
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
Part Number
SLEEVOIL
042220
042221
042248
042380
Page
Take-Up Frames
042199
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-67
B15-27, B15-32,
B15-41, B15-50,
B15-52, B15-113,
B15-119
B15-27, B15-32,
B15-41, B15-50,
B15-52, B15-95,
B15-113, B15-119
B15-103, B15-106
B15-103, B15-106
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-45, B15-125
B15-45, B15-52,
B15-125
B15-45, B15-125
B15-31, B15-41,
B15-69
B15-31, B15-41,
B15-69
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
B15-65
Part Number
Engineering
042137
042140
042143
042146
042149
042152
042155
042158
042161
042164
042167
042193
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
042531
042532
042533
Sleeve Bearings
042534
042535
042536
SLEEVOIL
042537
042538
Take-Up Frames
042539
042540
042541
042542
042543
Engineering
042544
042545
Part Number Index

Keyword Index
042547
042562
042568
042569
042570
042571
042572
042573
042574
042575
042576
042577
042578
042579
042580
042581
042594
042627
042628
Page
B15-29, B15-33,
B15-41, B15-69,
B15-95
B15-29, B15-33,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-54,
B15-69, B15-95
B15-29, B15-33,
B15-41, B15-69,
B15-95
B15-29, B15-33,
B15-41, B15-69,
B15-103, B15-106,
B15-115, B15-119
B15-29, B15-33,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-54,
B15-69, B15-95
B15-29, B15-33,
B15-41, B15-69,
B15-95, B15-103,
B15-106, B15-115,
B15-119
B15-29, B15-33,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-113
B15-33
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
B15-34, B15-69
B10-61
B10-61, B10-67
Part Number
042629
042630
042631
042632
042633
042634
043015
043048
043109
043248
043249
043386
043393
043400
043401
043402
043403
043404
043405
043406
043407
043408
043410
043411
043412
043421
043501
043502
043504
043506
043508
043509
043511
043512
043513
043514
043516
043519
043520
043521
043522
043538
043540
043541
043542
043543
Page
B10-61
B10-61, B10-67
B10-61
B10-61
B10-61
B10-61, B10-67
B15-26
B15-26
B15-29, B15-33,
B15-41, B15-69
B15-26
B15-26
B15-29, B15-33,
B15-41, B15-69
B15-77, B15-81
B15-77, B15-81
B15-77
B15-77, B15-81
B15-77, B15-81
B15-77, B15-81
B15-77, B15-81
B15-77, B15-81
B15-77, B15-81
B15-77, B15-81
B15-77, B15-81
B15-77, B15-81
B15-77, B15-81
B15-77
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-77, B15-80
B15-80
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-27, B15-32,
B15-41, B15-48,
B15-69, B15-95,
B15-113, B15-119
B15-27, B15-32,
B15-41, B15-48,
B15-69, B15-95
B15-27, B15-32,
B15-41, B15-48,
B15-54, B15-69,
B15-95
B15-27, B15-32,
B15-41, B15-48,
B15-69
Part Number
043544
043545
043546
043547
043548
043549
043550
043551
043552
043553
043554
043555
043556
043557
043558
043559
INDEX-12
Page
B15-27, B15-32,
B15-41, B15-48,
B15-69, B15-95
B15-27, B15-32,
B15-41, B15-48,
B15-69
B15-27, B15-32,
B15-41, B15-48,
B15-54, B15-69,
B15-95
B15-27, B15-32,
B15-41, B15-49,
B15-69, B15-103,
B15-106, B15-119
B15-27, B15-32,
B15-41, B15-49,
B15-69
B15-29, B15-32,
B15-41, B15-49,
B15-54, B15-69,
B15-95
B15-29, B15-33,
B15-41, B15-49,
B15-69
B15-29, B15-33,
B15-41, B15-49,
B15-54, B15-69
B15-29, B15-33,
B15-41, B15-49,
B15-69
B15-29, B15-33,
B15-41, B15-49,
B15-69, B15-95,
B15-103, B15-106,
B15-115, B15-119
B15-29, B15-33,
B15-41, B15-49,
B15-54, B15-69,
B15-95
B15-29, B15-33,
B15-41, B15-49,
B15-69, B15-103,
B15-106, B15-115,
B15-119
B15-29, B15-33,
B15-41, B15-49,
B15-54, B15-69,
B15-95, B15-103,
B15-106, B15-115,
B15-119
B15-29, B15-33,
B15-41, B15-49,
B15-69
B15-29, B15-33,
B15-41, B15-69,
B15-95
B15-29, B15-33,
B15-41, B15-69,
B15-95
Part Number
043560
043561
043562
043563
043564
043565
043566
043567
043568
043569
043570
043571
043572
043573
043574
043575
043578
043579
043580
043581
043582
043583
043584
043585
043586
Page
B15-29, B15-33,
B15-41, B15-54,
B15-69, B15-95
B15-29, B15-33,
B15-41, B15-69,
B15-95
B15-29, B15-41,
B15-69, B15-103,
B15-106, B15-115,
B15-119
B15-29, B15-33,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-54,
B15-69, B15-95
B15-29, B15-33,
B15-41, B15-69,
B15-95, B15-103,
B15-106, B15-115,
B15-119
B15-29, B15-33,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-31, B15-34,
B15-41, B15-69
B15-29, B15-33,
B15-41, B15-69
B15-31, B15-34,
B15-41, B15-69
B15-27, B15-32,
B15-41, B15-48,
B15-113, B15-119
B15-27, B15-32,
B15-41, B15-48,
B15-95, B15-113,
B15-119
B15-31, B15-44,
B15-71
B15-84, B15-93
B15-84, B15-93
B15-84, B15-93
B15-84, B15-93
B15-31, B15-44,
B15-71
B15-31, B15-44,
B15-71
043622
043623
043624
043625
043626
043627
043628
043629
043630
043631
043632
043633
043634
043635
043636
043637
043638
043639
043640
043958
043959
043960
043961
043962
043963
043964
043965
043966
043967
043968
043969
043970
043971
043972
043974
043976
043977
044199
044200
044201
044202
044203
044231
044232
044233
044234
044235
044236
044360
044440
045338
045412
045431
045434
045464
045600
045601
045602
045603
045604
045605
045606
045677
045778
045781
045784
045787
045790
045793
045796
045799
045802
045805
045808
045874
045927
045928
045931
045934
045936
045939
045943
INDEX-13
045949
045951
045953
045955
045956
046110
046166
046167
046168
046175
046176
046177
046219
046221
046222
046223
046224
046225
046226
046227
046228
046229
046230
046231
046232
046233
046234
046235
046236
046237
046238
046239
046285
046286
046287
046288
046289
046290
046291
046292
046293
046294
046295
046296
046297
046298
046299
046304
046305
046306
046307
046308
046309
046310
046311
046312
046313
Page
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106
B15-103, B15-106
B15-77
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B16-34, B16-35
B16-34, B16-35
B16-34, B16-35
B16-34, B16-35
B16-34, B16-35
B16-34, B16-35
B16-34, B16-35
B16-34, B16-35
B16-34
B16-34
B16-34
B16-34
B16-34
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-37
B16-37
B16-31, B16-37
B16-31, B16-37
B16-31, B16-37
B16-31, B16-37
B16-31, B16-37
B16-31, B16-37
B16-31, B16-37
B16-31
B16-31, B16-37
B16-31
B16-31
B16-31
B16-31
B16-31
B16-31
B16-31, B16-37
B16-31, B16-37
B16-31, B16-37
B16-31, B16-37
B16-31, B16-37
B16-31, B16-37
B16-31, B16-37
B16-31
B16-31, B16-37
B16-31
Plummer Blocks
B15-85
B15-85
B15-26, B15-35,
B15-48, B15-50,
B15-52, B15-77
B15-26, B15-35,
B15-49, B15-51,
B15-52, B15-77
B15-30, B15-35
B15-30, B15-35
B15-28, B15-35,
B15-49, B15-51,
B15-77
B15-28, B15-35
B15-61
B15-61
B15-61
B15-61
B15-61
B15-61
B15-29, B15-33,
B15-41, B15-69
B15-84, B15-91
B2-42
B2-42
B15-84, B15-93
B15-85, B15-93
B15-84, B15-93
B2-42
B2-42
B2-42
B2-42
B2-42
B2-42
B2-42
B2-42
B15-84, B15-91
B15-84, B15-91
B15-84, B15-91
B15-84, B15-91
B15-84, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B4-90, B4-94
B15-103, B15-106,
B15-113, B15-119
B15-103, B15-106,
B15-113, B15-119
B15-103, B15-106,
B15-113, B15-119
B15-103, B15-106
B15-103, B15-106
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
Part Number
Sleeve Bearings
043621
044165
044166
044198
Page
SLEEVOIL
043620
Part Number
Take-Up Frames
043619
B15-29, B15-33,
B15-44, B15-71
B15-29, B15-33,
B15-44, B15-71
B15-29, B15-33,
B15-44, B15-54,
B15-71
B15-29, B15-33,
B15-44, B15-71
B15-29, B15-33,
B15-44, B15-71
B15-29, B15-33,
B15-44, B15-71
B15-29, B15-33,
B15-44, B15-54,
B15-71
B15-29, B15-33,
B15-44, B15-71
B15-29, B15-33,
B15-44, B15-71
B15-29, B15-33,
B15-44, B15-71
B15-31, B15-44,
B15-71
B15-31, B15-44,
B15-71
B15-31, B15-44,
B15-71
B15-31, B15-44,
B15-71
B15-31, B15-44,
B15-71
B15-31, B15-44,
B15-71
B15-29, B15-33,
B15-44, B15-71
B15-85, B15-93
B15-85, B15-93
B15-85, B15-93
B15-85, B15-93
B15-85, B15-93
B15-85, B15-93
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
B15-77
Part Number
Page
043978 B15-77
043995 B15-26, B15-35,
B15-48, B15-50,
B15-52
043996 B15-26, B15-35,
B15-48, B15-50,
B15-52
043997 B15-26, B15-35,
B15-48, B15-50,
B15-52
043998 B15-26, B15-48,
B15-50, B15-52,
B15-77
044000 B15-26, B15-35,
B15-48, B15-50,
B15-52, B15-77
044003 B15-26, B15-35,
B15-48, B15-50,
B15-52, B15-77
044007 B15-26, B15-35,
B15-48, B15-50,
B15-52, B15-77
044010 B15-26, B15-35,
B15-48, B15-50,
B15-51, B15-52,
B15-77
044013 B15-26, B15-35,
B15-48, B15-49,
B15-50, B15-51,
B15-52
044015 B15-26
044020 B15-28, B15-35,
B15-49, B15-51,
B15-52, B15-77
044023 B15-28, B15-35,
B15-49, B15-51,
B15-52, B15-77
044025 B15-28, B15-35,
B15-49, B15-51,
B15-52, B15-77
044031 B15-28, B15-35,
B15-49, B15-51,
B15-77
044034 B15-28, B15-35,
B15-49, B15-51,
B15-77
044040 B15-28, B15-35,
B15-77
044043 B15-28, B15-35,
B15-77
044046 B15-28, B15-35
044049 B15-28, B15-35
044054 B15-28, B15-35
044055 B15-28, B15-30,
B15-35
044114 B15-26, B15-35,
B15-49, B15-51,
B15-52, B15-77
044115 B15-26
044164 B15-85
Engineering
043618
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
046314
046315
046316
046317
046318
046323
046324
046325
046326
046331
046332
046333
046350
046351
SLEEVOIL
046352
046353
Take-Up Frames
046354
046355
046356
Engineering
046357
046358
Part Number Index
046359
046360
046361
Keyword Index
046362
Page
B16-31
B16-31
B16-31
B16-31
B16-31
B15-67
B15-67
B15-67
B15-67
B16-34, B16-35
B16-34, B16-35
B16-34, B16-35
B15-27, B15-32,
B15-44, B15-48,
B15-50, B15-52
B15-27, B15-32,
B15-44, B15-48,
B15-50, B15-52
B15-27, B15-32,
B15-44, B15-48,
B15-50, B15-52,
B15-71
B15-27, B15-32,
B15-44, B15-48,
B15-50, B15-52,
B15-71
B15-27, B15-32,
B15-44, B15-48,
B15-50, B15-52,
B15-54, B15-71
B15-27, B15-32,
B15-44, B15-48,
B15-50, B15-71
B15-27, B15-32,
B15-44, B15-48,
B15-50, B15-52,
B15-71
B15-27, B15-32,
B15-44, B15-48,
B15-50, B15-71
B15-27, B15-32,
B15-44, B15-48,
B15-50, B15-52,
B15-54, B15-71
B15-27, B15-32,
B15-44, B15-49,
B15-51, B15-71
B15-27, B15-32,
B15-44, B15-49,
B15-51, B15-52,
B15-71
B15-29, B15-32,
B15-44, B15-49,
B15-51, B15-52,
B15-54, B15-71
B15-29, B15-33,
B15-44, B15-49,
B15-51, B15-71
Part Number
046363
046364
046400
046401
046402
046403
046404
046405
046406
046407
046408
046409
046410
046411
046412
046413
046414
046415
046416
046417
046418
046419
046420
046421
046422
046423
046424
046425
046430
046431
Page
B15-29, B15-33,
B15-44, B15-49,
B15-51, B15-52,
B15-54, B15-71
B15-29, B15-33,
B15-44, B15-49,
B15-51, B15-71
B15-103, B15-106,
B15-113, B15-119
B15-103, B15-106,
B15-113, B15-119
B15-103, B15-106,
B15-113, B15-119
B15-103, B15-106,
B15-113, B15-119
B15-103, B15-106,
B15-113, B15-119
B15-103, B15-106
B15-103, B15-106
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106
B15-103, B15-106
B15-103, B15-106,
B15-115, B15-119
B15-103, B15-106,
B15-115, B15-119
B15-29, B15-33,
B15-41, B15-69
B15-103, B15-106
B15-103, B15-106
B15-103, B15-106
B15-103, B15-106
B15-29, B15-33,
B15-44, B15-49,
B15-51, B15-71
B15-29, B15-33,
B15-44, B15-49,
B15-51, B15-54,
B15-71
Part Number
046432
046433
046434
046463
046464
046465
046466
046467
046468
046469
046470
046471
046472
046473
046474
046475
046476
046477
046478
046487
046488
046489
046490
046492
046496
046498
046499
046545
046550
046551
046552
046553
046554
046555
046556
046557
046558
046559
046560
046561
046562
046563
046564
046565
046566
046567
046568
046569
046570
046572
046632
INDEX-14
Page
B15-29, B15-33,
B15-44, B15-49,
B15-51, B15-71
B15-29, B15-33,
B15-44, B15-49,
B15-51, B15-54,
B15-71
B15-29, B15-33,
B15-44, B15-49,
B15-51, B15-71
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B15-113, B15-119
B16-31, B16-37
B16-31, B16-37
B16-31, B16-37
B16-31
B16-37
B16-37
B15-85, B15-91
B15-85, B15-91
B15-29, B15-33,
B15-44, B15-71
B15-99
B15-95, B15-99
B15-95, B15-99
B15-95, B15-99
B15-95, B15-99
B15-95, B15-99
B15-99
B15-91, B15-95,
B15-99
B15-95, B15-99
B15-95, B15-99
B15-95, B15-99
B15-95, B15-99
B15-95, B15-99
B15-95, B15-99
B15-95, B15-99
B15-95, B15-99
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-45, B15-125
Part Number
046634
046635
046637
046638
046639
046642
046643
046680
046682
046710
046711
046712
046713
046714
046715
046717
046718
046719
046720
046721
046722
046723
046751
046752
046753
046754
046755
046756
046757
046758
046759
046760
046761
046762
046763
046764
046765
046766
046767
046768
046769
046770
046771
046772
046773
046850
046851
046872
046873
046874
046875
046876
046877
046878
046879
046880
046881
046882
046883
046884
Page
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-45, B15-125
B15-95, B15-99
B15-95, B15-99
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-35, B16-39
B16-35, B16-39
B16-35
B16-35
B16-35
B15-123
B15-123
B15-123
B15-123
B15-123
B15-109, B15-123
B15-109, B15-123
B15-109, B15-123
B15-109
B15-109, B15-123
B15-109, B15-123
B15-109, B15-123
B15-109, B15-123
B15-109, B15-123
B15-109, B15-123
B15-109, B15-123
B15-109, B15-123
B15-109
B15-109, B15-123
B15-109
B15-109
B15-123
B15-123
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
047941
047942
047943
047944
047945
047946
047947
047948
047949
047950
047951
047952
047953
047954
047955
047956
047957
048000
048001
048002
048003
048004
048005
048006
048007
048008
048009
048010
048011
048012
048013
048014
048015
048016
INDEX-15
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-15
B13-19
B13-19
B13-19
B13-19
B13-19
B13-19
B13-19
B13-19
B13-19
Part Number
048126
048128
048129
048130
048131
048202
048203
048204
048205
048206
048207
048208
048210
048216
048217
048218
048219
048220
048221
048222
048224
048385
048386
048389
048390
048925
048926
048927
048928
048929
048930
048931
048932
048933
048934
048937
048938
048939
048940
049235
049380
049385
049415
049430
049437
049447
049462
049466
049467
049468
049469
049470
049477
049490
049496
049610
049615
049686
049690
049696
Page
B13-19
B13-19
B13-19
B13-19
B13-19
B13-20
B13-20
B13-20
B13-20
B13-20
B13-20
B13-20
B13-20
B13-20
B13-20
B13-20
B13-20
B13-20
B13-20
B13-20
B13-20
B14-103
B14-103
B14-103
B14-103
B14-105, B16-21
B14-105
B14-105, B16-21
B14-105
B14-105, B16-21
B14-105, B16-21
B14-105, B16-21
B14-105, B16-21
B14-105, B16-21
B14-105, B16-21
B16-21
B16-21
B16-21
B16-21
B10-67
B2-56
B7-34
B6-50
B6-53
B4-36
B6-31
B4-99
B6-31
B6-42
B8-14
B2-28
B7-30
B2-36
B16-37
B6-46
B6-38
B4-50
B2-31
B4-16
B6-48
Plummer Blocks
048017
048018
048019
048020
048021
048022
048023
048024
048025
048026
048027
048028
048029
048030
048031
048032
048033
048034
048035
048036
048037
048038
048039
048040
048041
048042
048043
048044
048045
048046
048047
048048
048049
048050
048051
048052
048053
048054
048055
048056
048057
048058
048059
048060
048061
048062
048063
048064
048065
048066
048067
048109
048110
048111
048113
048114
048115
048116
048124
048125
Page
Sleeve Bearings
B15-84, B15-93
B15-84, B15-93
B15-85, B15-93
B15-85, B15-93
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-84, B15-91
B15-84, B15-91
B15-84, B15-91
B15-84, B15-91
B15-84, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B15-85, B15-91
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
B13-13
Part Number
SLEEVOIL
047679
047680
047681
047682
047815
047816
047817
047818
047819
047820
047821
047822
047823
047824
047825
047826
047827
047828
047829
047830
047831
047940
Page
Take-Up Frames
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-47
B15-84, B15-93
B15-84, B15-93
B15-84, B15-93
B15-84, B15-93
B15-85, B15-93
B15-85, B15-93
B15-85, B15-93
B15-84, B15-93
B15-84, B15-93
B15-84, B15-93
B15-85, B15-93
B15-85, B15-93
B15-85, B15-93
B15-85, B15-93
B15-85, B15-93
B15-84, B15-93
B15-84, B15-93
B15-84, B15-93
B15-84, B15-93
B15-84, B15-93
Part Number
Engineering
046885
046886
046887
046891
046892
046893
046894
046960
046961
046962
046963
046964
046965
046966
046967
046968
046969
046970
046971
046972
046973
046974
046975
046976
046977
046978
046979
046980
046981
046982
046983
046984
046985
046986
046987
046988
046989
046991
046992
046993
047628
047629
047630
047631
047632
047635
047636
047637
047638
047639
047641
047642
047643
047644
047645
047646
047647
047648
047649
047678
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
049709
049742
049747
049751
049781
049784
049787
049802
049803
049811
049813
049816
049818
049829
049835
049838
049841
049843
049844
049845
049848
049852
049855
049859
049879
049884
049887
049891
049892
049893
049894
049918
049925
049926
049930
049944
049945
049950
049991
049996
050119
050130
050132
050146
050189
050386
050420
050474
050498
050524
050531
050555
050580
050653
050654
050656
050662
050778
050792
050828
Page
B6-32
B4-38
B6-46
B9-18
B6-52
B8-10
B7-22
B7-22
B7-22
B4-101
B6-51
B4-28
B4-28
B4-74
B2-56
B6-38
B7-14
B7-14
B7-14
B7-34
B7-14
B4-12
B6-51
B4-32
B7-24
B7-30
B8-8
B4-101
B8-14
B4-101
B4-100
B4-94
B4-92
B4-40
B6-32
B4-30
B4-94
B7-30
B4-100
B2-26
B4-34
B4-58
B4-62
B4-44
B4-99
B4-32
B9-22
B15-85, B15-91
B4-44
B2-42
B15-85, B15-93
B4-101
B2-42
B2-42
B2-42
B2-42
B4-59, B4-62
B8-14
B4-16
B8-12
Part Number
050829
050830
050831
050833
050834
050835
050836
050837
050838
050839
050840
050842
050843
050844
050845
050846
050848
050867
050895
050951
051513
051606
051699
051774
051825
051826
051827
051841
051878
051879
051880
051885
051888
051889
051890
051891
051892
051906
051931
051987
051991
051992
052002
052003
052004
052005
052006
052007
052008
052009
052010
052011
052012
052015
052016
052017
052032
052045
052047
052048
Page
B8-12
B8-12
B8-12
B8-12
B4-54
B4-54
B8-16
B4-12
B8-10
B7-24
B8-14
B8-14
B4-56
B8-16
B8-8
B4-74
B8-12
B4-56
B4-52
B7-24
B4-99
B7-34
B8-14
B4-50
B4-100
B4-99
B4-99
B15-52, B16-35
B4-20
B4-20
B4-20
B7-22
B8-14
B8-10
B8-10
B8-16
B8-16
B4-99
B4-58
B4-54
B4-56
B4-56
B4-60
B4-60
B4-56, B4-60
B4-26
B4-56
B4-56
B4-56
B4-54
B4-54
B4-36
B4-12
B4-99
B4-50
B4-60
B4-88
B7-34
B4-100
B4-100
Part Number
052081
052093
052094
052101
052194
052199
052205
052220
052224
052275
052276
052291
052294
052302
052311
052413
052414
052472
052478
052531
052532
052535
052540
052546
052550
052567
052570
052604
052618
052620
052621
052622
052623
052626
052637
052638
052639
052640
052641
052642
052643
052644
052645
052668
052722
052729
052762
052763
052792
052794
052906
052931
052932
052939
052959
052981
052984
053007
053008
053011
INDEX-16
Page
B15-85, B15-92
B2-43, B6-54
B4-50
B4-12
B4-70
B4-70
B4-60
B4-34
B4-24
B4-26
B4-100
B4-56
B4-99
B4-60
B4-99
B4-18
B4-18
B4-32
B4-100
B4-99
B4-100
B6-31
B4-99
B6-46
B4-100
B7-30
B15-52, B16-35
B4-99
B4-99
B2-42
B2-42
B2-42
B2-42
B6-42
B15-52, B16-35
B15-52, B16-35
B15-52, B16-35
B15-52, B16-35
B15-52, B16-35
B15-52, B16-35
B15-52, B16-35
B15-52, B16-35
B4-88
B6-31
B6-46
B7-24
B7-14
B7-14
B4-14
B4-14
B4-50
B6-26
B9-14
B4-72
B7-30
B2-42
B6-26
B9-18
B9-6
B6-22
Part Number
053021
053025
053042
053045
053047
053067
053088
053140
053169
053170
053175
053183
053201
053219
053320
053326
053339
053411
053412
053413
053414
053415
053416
053417
053418
053493
053517
053563
053565
053617
053628
053662
053670
053717
053718
053719
053763
053776
053784
053871
053883
053894
053895
053901
053955
053986
054009
054019
054063
054065
054142
054145
054190
054196
054203
054225
054276
054300
054314
054315
B4-24
B4-24
B9-6
B6-53
B9-6
B10-67
B16-41
B6-31
B4-99
B4-12, B4-20
B4-36
B4-24
B16-35
B7-22
B4-84
B7-24
B7-22
B7-22
B7-22
B7-22
B7-22
B7-22
B7-22
B7-22
B7-22
B6-42
B6-46
B4-100
B4-90
B7-24
B10-67
B8-10
B4-99
B4-16
B4-16
B4-28
B9-22
B4-88, B4-94
B6-40
B4-101
B4-36
B4-101
B4-101
B4-62
B4-100
B2-43, B6-54
B4-18
B4-90
B4-101
B4-100
B6-26
B2-42
B4-99
B4-90
B4-99, B4-100
B4-90
B4-99
B4-99
B4-99
B4-100
Page
055940
055943
056100
056102
056104
056106
056108
056110
056112
056114
056130
056132
INDEX-17
B7-24
B4-99
B6-28
B6-31
B6-32
B2-56
B4-38
B4-60
B4-101
B4-94
B4-40
B6-26
B6-26
B2-31
B6-26
B6-34
B6-34
B2-31
B2-42
B4-100
B4-100
B4-88
B4-100
B4-84
B15-103
B4-101
B6-48
B4-99
B4-88
B4-84
B4-100
B4-100
B4-24
B2-48
B4-99
B6-40
B4-100
B2-56
B6-42
B2-56
B4-20
B6-42
B4-101
B2-56
B7-22
B4-39
B4-100
B4-62
B6-46
B4-100
B4-100
B4-90
B4-101
B4-99
B8-14
B4-84
B2-46
B2-64
B4-101
B2-64
Part Number
057908
057958
057966
058081
058157
058183
058194
058233
058262
058263
058275
058294
058311
058336
058345
058347
058380
058395
058400
058404
058470
058514
058515
058516
058529
058544
058545
058593
058594
058595
058596
058597
058619
058624
058625
058630
058632
058633
058647
058648
058652
058665
058699
058702
058705
058736
058738
058778
058779
058792
058852
058897
058898
058902
058903
058904
058905
058906
058907
058908
B2-59
B15-54
B15-54
B6-44
B4-90, B4-94
B4-100
B4-99
B4-101
B4-99
B4-99
B9-6
B2-64
B2-59
B2-59
B2-42
B6-48
B4-100
B6-36
B4-26
B2-56
B2-56
B2-65
B2-57
B2-48
B4-50
B4-50
B4-50
B2-56
B2-64
B2-64
B2-46
B2-46
B4-100
B4-26
B6-26
B4-84
B2-51
B4-100
B6-46
B2-59
B4-101
B2-42
B15-52
B4-14
B4-76
B4-58
B4-101
B9-16
B9-16
B2-56
B4-100
B4-70
B6-34
B15-52
B15-52
B15-52
B15-52
B15-52
B15-52
B15-52
Page
Plummer Blocks
056862
056864
056867
056889
056890
056893
056902
056907
056911
056912
056929
056961
056962
056964
056967
056968
056970
056971
057102
057114
057132
057201
057212
057220
057260
057265
057266
057338
057354
057361
057363
057368
057414
057442
057474
057475
057487
057524
057543
057594
057603
057658
057683
057687
057692
057707
057708
057709
057770
057800
057801
057802
057839
057847
057854
057878
057898
057899
057906
057907
Page
Sleeve Bearings
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B2-64
B2-56
B6-53
B4-24
B4-24
B4-68
B2-46
B6-34
B2-26
B2-56
B2-26
B2-31
B2-26
B2-26
B2-51
B4-101
B2-56
B4-100
B2-36
B6-46
B4-16
B6-10
B2-31
B2-31
B4-100
B2-36
B6-46, B6-48
B6-16
B6-28
B15-131
B2-31
B4-12
B4-18
B4-50
B6-44
B6-32
B7-24
B2-26
B2-26
B2-26
B2-31
B2-31
B2-31
B2-31
B2-31
B2-36
B2-36
B2-36
B2-36
B2-36
B4-28
B9-10
B4-40
B4-14
Part Number
SLEEVOIL
056134
056136
056138
056140
056142
056144
056440
056449
056468
056481
056483
056492
056497
056512
056525
056526
056548
056552
056553
056565
056577
056578
056580
056588
056593
056605
056606
056610
056611
056612
056630
056633
056638
056676
056696
056728
056734
056744
056750
056765
056779
056780
056784
056796
056797
056800
056801
056802
056803
056804
056805
056806
056807
056808
056809
056810
056811
056830
056845
056855
Page
Take-Up Frames
B4-100
B4-99
B6-48
B6-48
B4-100
B4-99
B4-90
B4-32
B6-16
B8-8
B4-99
B4-32
B4-100
B4-101
B4-100
B4-58
B4-22
B4-32
B4-99
B4-101
B4-101
B4-99
B4-100
B4-100
B4-100
B4-88
B7-12
B10-67
B15-54
B15-54
B15-54
B15-54
B15-54
B15-54
B15-54
B15-54
B10-67
B10-67
B10-67
B10-67
B15-54
B15-54
B15-54
B15-54
B15-54
B10-67
B10-67, B14-103,
B15-54
B14-103, B15-54
B10-67
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
B10-51
Part Number
Engineering
054316
054342
054390
054411
054412
054419
054431
054436
054455
054495
054534
054548
054556
054580
054593
054726
054727
054781
054782
054831
054837
054843
054917
054918
054934
054949
054950
054960
055572
055654
055710
055712
055714
055716
055734
055740
055805
055806
055807
055840
055876
055881
055898
055906
055907
055915
055931
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
058909
058910
058915
058931
058941
058944
058965
058975
058989
058994
058996
058997
059593
059595
059596
059614
059636
059637
059667
059673
059680
059696
059704
059705
059722
059737
059754
059758
059785
059798
059799
059811
059816
059821
059823
059844
059850
059857
059869
059870
059880
059882
059954
060578
060579
060745
060746
060747
060748
060749
060750
060751
060752
060753
060754
060755
060756
060905
060906
061082
B15-52
B2-64
B4-101
B2-46
B2-56
B2-46
B2-42
B2-46
B2-42
B6-42
B7-34
B6-16, B6-18
B6-46
B9-16
B9-16
B4-100
B4-101
B4-30
B7-12
B4-99
B6-26
B4-100
B6-46
B6-34
B2-46
B4-99
B6-53
B6-48
B4-16
B2-26
B2-26
B8-14
B4-50
B4-99
B2-56
B4-101
B6-26
B6-26
B2-43, B6-54
B2-26
B6-42
B6-16
B4-100
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B10-53
B15-114
B15-114
B11-19
Page
Part Number
061083
061084
061085
061086
061087
062040
062070
062143
062152
062157
062162
062176
062178
062182
062184
062186
062187
062260
062263
062270
062281
062285
062304
062306
062307
062309
062317
062321
062337
062339
062340
062373
062379
062407
062408
062438
062439
062443
062454
062461
062475
062491
062497
062500
062509
062525
062542
062570
062572
062575
062628
062648
062676
062682
062686
062691
062700
062702
062738
062741
B11-19
B11-19
B11-19
B11-19
B11-19
B11-45
B11-45
B6-14
B6-34
B4-100
B4-14
B6-54
B4-14, B4-26
B4-100
B6-46
B4-26
B6-12
B4-46
B6-36
B14-58
B6-42
B6-48
B4-28
B6-46
B7-22
B4-100
B2-59
B4-28
B9-28
B9-28
B2-36
B6-40
B6-26
B6-34
B6-34
B6-26
B9-18
B6-52
B9-22
B14-58
B6-34
B6-34
B9-19
B7-20
B8-16
B6-31
B2-36
B4-94
B4-99
B6-32
B2-64
B4-40
B4-100
B5-14
B4-40
B4-76
B14-58
B6-48
B6-42
B5-16
Page
Part Number
062742
062746
062773
062779
062781
062829
062835
062837
062842
062861
062862
062874
062875
062877
062879
062880
062881
062893
062897
062899
062901
062913
062945
062958
062975
062978
062993
062994
063359
063360
063361
063362
063363
063366
063389
063390
063392
063393
063396
063411
063420
063421
063422
063424
063426
063429
063450
063451
063452
063454
063456
063459
063694
063765
063766
063767
063768
063769
063770
063771
INDEX-18
B5-16
B4-42
B6-46
B4-100
B6-32
B4-99
B2-36
B2-46, B2-56
B4-60
B5-14
B5-14
B2-26
B2-48
B4-99
B2-26
B6-50, B6-51
B6-46, B6-48
B9-20
B4-60
B7-30
B2-35
B2-31
B9-18
B5-14
B4-76
B5-12
B5-12
B2-31
B11-55
B11-55
B11-55
B11-55
B11-55
B11-55
B11-55
B11-55
B11-55
B11-55
B11-55
B11-55
B11-57
B11-57
B11-57
B11-57
B11-57
B11-57
B11-57
B11-57
B11-57
B11-57
B11-57
B11-57
B10-67
B14-103
B14-103
B14-103
B14-103
B14-103
B14-103
B14-103
Page
Part Number
063772
063773
063774
063775
063776
064000
064064
064070
064071
064072
064073
064074
064075
064076
064077
064079
064089
064096
064136
064147
064149
064153
064154
064155
064156
064157
064178
064198
064203
064211
064214
064230
064237
064249
064255
064289
064300
064306
064335
064341
064361
064430
064450
064463
064472
064473
064480
064483
064503
064535
064536
064537
064557
064572
064584
064586
064624
064637
064656
064670
B14-103
B14-103
B14-103
B14-103
B14-103
B2-31
B2-46
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B5-28
B4-40
B7-30
B4-28
B2-54
B4-90, B4-94
B16-12
B16-12
B16-12
B16-12
B16-12
B7-30
B4-44
B4-56
B5-26
B4-56
B7-12
B4-101
B4-26
B2-31
B7-26
B6-46, B6-48
B2-26
B4-58
B2-31
B4-40
B6-42
B4-16
B5-14
B5-26, B5-30
B6-28
B4-40
B9-12
B2-54
B6-58
B7-22
B4-28
B4-100
B2-46
B2-62
B4-59, B4-62
B6-32
B4-24
B4-34
B5-44
Page
INDEX-19
B11-30
B11-30
B11-30
B11-30
B11-30
B11-33
B11-33
B11-30
B11-30
B11-30
B11-33
B11-30
B11-30
B11-33
B11-30
B11-30
B11-33
B11-33
B11-33
B11-30
B11-33
B11-33
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-33
B11-33
B11-30
B11-30
B11-30
B11-33
B11-30
B11-30
B11-30
B11-33
B11-30
B11-33
B11-33
B11-33
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
Part Number
066292
066293
066294
066295
066296
066297
066298
066299
066300
066301
066302
066303
066304
066305
066306
066307
066308
066309
066310
066311
066312
066314
066315
066316
066317
066318
066319
066320
066321
066322
066324
066325
066326
066360
066363
066365
066366
066367
066370
066371
066372
066373
066374
066375
066377
066378
066379
066381
066382
066384
066385
066386
066388
066389
066400
066403
066405
066406
066407
066409
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-30
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
Page
Plummer Blocks
066217
066218
066220
066222
066223
066224
066225
066226
066228
066230
066231
066232
066234
066235
066236
066237
066238
066240
066242
066243
066244
066245
066246
066247
066248
066249
066250
066252
066253
066254
066256
066257
066258
066260
066261
066262
066263
066266
066268
066269
066270
066271
066272
066273
066274
066276
066278
066279
066280
066281
066282
066283
066284
066285
066286
066287
066288
066289
066290
066291
Page
Sleeve Bearings
B11-11
B11-14
B11-14
B11-14
B11-11
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B9-22
B4-26
B6-58
B7-30
B4-40
B6-48
B4-60
B4-72, B4-73
B4-36, B4-42
B5-22
B5-18
B2-36
B6-26
B5-40
B7-12
B5-14
B6-26
B7-34
B7-24
B9-8
B14-56
B4-70
B4-66, B4-68
B4-60
B2-46
B14-56
B6-26
B7-30
B4-70
B2-30
B4-52
B4-100
B4-34
B6-28
B6-28
B4-22
B5-18
B5-18
B2-64
B6-12, B6-20
B2-56
B2-36
B5-22
B11-30
B11-30
B6-16, B11-30
B11-30
B11-30
Part Number
SLEEVOIL
065303
065304
065305
065306
065310
065311
065312
065313
065314
065315
065316
065317
065530
065548
065551
065555
065565
065569
065576
065593
065595
065597
065598
065600
065605
065607
065616
065620
065632
065634
065635
065636
065641
065642
065644
065653
065655
065657
065658
065666
065681
065694
065699
065700
065766
065770
065771
065774
065776
065777
065780
065784
065786
065945
065969
066212
066213
066214
066215
066216
Page
Take-Up Frames
B5-22
B4-18
B8-8
B6-46
B4-76
B2-51
B6-31, B6-32
B9-18
B4-28
B7-30
B4-40
B5-18
B6-12
B2-46
B5-14
B4-59
B4-90
B5-18
B5-18
B4-99
B7-12
B6-46
B7-22
B4-58
B4-58
B4-59
B7-28
B4-54
B2-35
B2-24
B11-9
B11-9
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-11
B11-11
B11-11
B11-11
Part Number
Engineering
064684
064689
064691
064698
064704
064720
064735
064750
064756
064762
064775
064794
064825
064839
064841
064853
064865
064874
064875
064880
064882
064890
064910
064911
064912
064913
064929
064943
064993
064994
065238
065244
065258
065260
065262
065265
065268
065270
065271
065274
065282
065283
065284
065285
065286
065287
065288
065289
065290
065291
065292
065293
065294
065295
065296
065297
065298
065299
065300
065302
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
066411
066412
066413
066414
066415
066417
066418
066419
066421
066422
066424
066425
066426
066428
066429
066444
066445
066446
066447
066448
066450
066451
066455
066456
066457
066458
066459
066460
066461
066463
066464
066465
066466
066467
066468
066469
066471
066472
066473
066475
066476
066478
066479
066480
066482
066483
066484
066485
066486
066487
066488
066489
066499
066500
066501
066502
066503
066504
066506
066507
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-33
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
Page
Part Number
066509
066510
066511
066512
066513
066514
066515
066516
066517
066519
066520
066521
066522
066523
066524
066526
066527
066528
066530
066531
066533
066534
066535
066537
066538
066539
066540
066541
066542
066543
066544
066559
066560
066561
066562
066563
066564
066566
066567
066569
066570
066571
066572
066573
066574
066575
066576
066577
066578
066580
066581
066582
066583
066584
066585
066587
066588
066589
066590
066591
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
Page
Part Number
066593
066594
066596
066598
066600
066601
066602
066603
066604
066605
066606
066607
066629
066630
066631
066632
066633
066634
066635
066636
066637
066638
066642
066643
066644
067007
067016
067019
067031
067034
067042
067043
067044
067045
067046
067047
067048
067049
067050
067051
067052
067053
067054
067055
067056
067057
067060
067061
067072
067073
067075
067078
067100
067103
067120
067123
067135
067138
067149
067151
INDEX-20
Page
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B11-39
B14-104, B16-22
B14-104, B16-22
B14-104, B16-22
B14-104, B16-22
B14-104, B16-22
B14-104, B16-22
B14-104, B16-22
B14-104, B16-22
B14-104, B16-22
B14-104, B16-22
B14-104, B16-22
B14-104, B16-22
B14-104
B11-43
B11-43
B4-36
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-43
B11-44
B11-44
Part Number
067152
067153
067154
067155
067156
067157
067159
067164
067234
067323
067326
067340
067342
067343
067344
067345
067346
067347
067348
067350
067352
067353
067354
067355
067356
067357
067501
067503
067509
067511
067517
067519
067520
067521
067576
067601
067630
067642
067652
067663
067664
067666
067674
067678
067679
067710
067713
067726
067742
067774
067777
067783
067829
067830
067839
067865
067868
067874
067892
Page
B11-44
B11-44
B11-44
B11-44
B11-44
B11-44
B11-44
B11-44
B10-67
B10-67
B15-54
B10-67
B10-67
B10-67
B10-67
B10-67
B10-67
B10-67
B10-67
B10-67
B10-67
B10-67
B10-67
B10-67
B10-67
B10-67
B15-54
B15-54
B15-54
B15-54
B15-54
B15-54
B15-54
B15-54
B10-67, B14-103,
B15-54
B9-20
B2-26
B4-54
B4-16
B4-34
B8-10
B4-36
B4-42
B2-24
B4-14
B4-99
B5-12
B6-44
B4-16
B4-100
B5-14
B6-12
B4-62
B4-100
B2-26
B5-12
B4-64
B4-54
B4-52
INDEX-21
B4-24
B9-18
B8-16
B4-40
B4-50
B7-42
B9-18
B5-26
B9-10
B5-14, B5-22
B7-24
B9-16
B5-22
B5-18
B5-32
B4-94
B7-26
B14-56
B4-40
B4-40
B4-59, B4-62
B4-46
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
Part Number
069349
069350
069351
069352
069353
069354
069355
069356
069357
069358
069359
069360
069361
069362
069363
069364
069365
069366
069367
069368
069369
069370
069371
069372
069373
069374
069375
069376
069377
069378
069379
069380
069381
069382
069383
069384
069385
069386
069387
069388
069389
069390
069391
069392
069393
069394
069395
069400
069401
069402
069403
069404
069405
069406
069407
069408
069409
069410
069411
069412
B14-97
B14-97
B14-97
B14-97
B14-97
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-97
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-99
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
Page
Plummer Blocks
068800
068803
068809
068839
068840
068849
068855
068861
068864
068865
068866
068867
068871
068872
068878
068889
068901
068905
068915
068937
068973
068996
069034
069039
069045
069046
069060
069061
069062
069063
069064
069065
069066
069067
069069
069286
069287
069288
069289
069296
069297
069303
069304
069305
069306
069307
069308
069312
069313
069316
069317
069340
069341
069342
069343
069344
069345
069346
069347
069348
Page
Sleeve Bearings
B4-22
B6-34
B6-42
B2-46
B5-22
B4-20
B4-12
B6-16, B6-18
B4-76
B9-18
B6-46
B9-12
B4-94
B2-64
B8-12
B7-34
B5-22
B4-92
B2-46
B4-48
B6-12
B6-54
B9-18
B4-56
B4-56
B4-56
B14-56
B4-14
B6-52
B5-12
B6-26
B6-46
B4-72
B5-22
B6-32
B5-22
B5-22
B5-22
B5-14
B5-32
B5-22
B2-62
B5-14
B8-16
B4-50
B5-10
B5-10
B7-16
B9-12
B6-42
B6-34
B4-20
B9-20
B14-56
B14-56
B6-12
B9-16
B4-58
B4-48
B9-22
Part Number
SLEEVOIL
068307
068320
068321
068322
068329
068361
068372
068373
068374
068387
068389
068400
068404
068424
068428
068471
068472
068478
068495
068532
068537
068540
068561
068571
068572
068573
068576
068603
068608
068622
068643
068650
068659
068662
068663
068673
068680
068682
068683
068685
068686
068687
068715
068716
068720
068726
068727
068743
068747
068756
068758
068760
068763
068774
068775
068777
068784
068785
068789
068790
Page
Take-Up Frames
B4-88
B6-42
B5-12
B2-46
B14-56
B14-56
B4-14
B7-22
B6-28
B4-36
B6-34
B6-26
B2-56
B2-46
B6-28
B6-54
B4-88
B4-26
B2-64
B6-16
B4-100
B4-30
B5-20, B7-20
B4-99
B7-30
B7-22
B4-72
B4-99
B7-16
B7-16
B7-16
B7-16
B7-16
B7-16
B7-16
B7-18
B7-18
B7-18
B7-18
B7-18
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-24
B7-24
B7-24
B7-24
B5-18
B6-48
B2-28
B2-26
B4-101
B4-100
B5-40
B2-31
B4-99
B4-58
Part Number
Engineering
067902
067903
067910
067919
067921
067922
067925
067926
067958
067959
067969
067970
067986
067996
067997
068008
068013
068025
068053
068061
068066
068068
068071
068088
068092
068118
068184
068185
068195
068196
068197
068198
068199
068200
068201
068202
068203
068204
068205
068206
068207
068208
068209
068210
068211
068212
068213
068214
068215
068216
068230
068232
068234
068236
068239
068266
068273
068283
068290
068301
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
069413
069414
069415
069416
069417
069418
069419
069420
069421
069422
069423
069424
069425
069426
069427
069428
069429
069430
069431
069432
069433
069434
069435
069436
069437
069438
069439
069440
069441
069442
069443
069444
069445
069446
069447
069448
069449
069450
069451
069452
069453
069454
069455
069456
069457
069458
069459
069460
069461
069462
069463
069464
069465
069466
069467
069468
069469
069470
069471
069472
B14-31
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-33
B14-33
B14-33
Page
Part Number
069473
069474
069475
069476
069477
069478
069479
069480
069481
069482
069483
069484
069485
069486
069487
069488
069489
069490
069491
069492
069493
069494
069495
069496
069497
069498
069499
069500
069501
069502
069503
069504
069505
069506
069507
069508
069509
069510
069511
069520
069521
069522
069523
069524
069525
069526
069527
069528
069529
069530
069531
069532
069533
069534
069535
069536
069537
069538
069539
069540
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-31
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-33
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-45
B14-45
B14-45
B14-45
B14-45
B14-45
B14-45
B14-43
B14-43
B14-43
Page
Part Number
069541
069542
069543
069544
069545
069546
069547
069548
069549
069550
069551
069552
069553
069554
069555
069556
069557
069558
069559
069560
069561
069562
069563
069564
069565
069566
069567
069568
069569
069570
069571
069572
069573
069574
069575
069576
069577
069578
069579
069580
069581
069582
069583
069584
069585
069586
069587
069588
069589
069590
069591
069593
069594
069595
069596
069597
069598
069599
069600
069601
INDEX-22
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-45
B14-45
B14-45
B14-45
B14-45
B14-45
B14-45
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-45
B14-45
B14-45
B14-45
B14-45
B14-45
B14-45
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-43
B14-45
B14-45
B14-45
B14-45
B14-45
B14-45
B14-45
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
Page
Part Number
069602
069603
069604
069605
069606
069607
069608
069609
069610
069611
069612
069630
069631
069632
069633
069634
069635
069636
069637
069638
069639
069640
069641
069642
069643
069644
069645
069646
069647
069648
069649
069650
069651
069652
069653
069654
069655
069656
069657
069658
069659
069660
069661
069662
069663
069664
069665
069666
069667
069668
069669
069670
069671
069672
069673
069674
069675
069676
069677
069678
B14-67
B14-67
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
B14-67
Page
INDEX-23
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-83
B14-83
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83
B14-83, B14-87
B14-83, B14-87
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85
B14-85, B14-89
B14-85, B14-89
B14-85
B14-85
B14-85
B14-85
B14-83
B14-83
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83
B14-83, B14-87
B14-83, B14-87
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
Part Number
069859
069860
069861
069862
069863
069864
069865
069866
069867
069868
069869
069870
069871
069872
069873
069874
069875
069876
069877
069878
069879
069880
069881
069882
069883
069884
069885
069886
069887
069888
069889
069890
069891
069892
069893
069894
069895
069896
069897
069898
069899
069900
069901
069902
069903
069904
069905
069906
069907
069908
069909
069910
069911
069912
069913
069914
069915
069916
069917
069918
Page
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85
B14-85, B14-89
B14-85, B14-89
B14-85
B14-85
B14-85
B14-85
B14-83
B14-83
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83
B14-83, B14-87
B14-83, B14-87
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85
B14-85, B14-89
B14-85, B14-89
B14-85
B14-85
B14-85
B14-85
B14-83
B14-83
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83, B14-87
B14-83, B14-87
B14-83, B14-87
B14-83, B14-87
B14-83
B14-83
B14-83, B14-87
B14-83, B14-87
B14-85, B14-89
Plummer Blocks
069799
069800
069801
069802
069803
069804
069805
069806
069807
069808
069809
069810
069811
069812
069813
069814
069815
069816
069817
069818
069819
069820
069821
069822
069823
069824
069825
069826
069827
069828
069829
069830
069831
069832
069833
069834
069835
069836
069837
069838
069839
069840
069841
069842
069843
069844
069845
069846
069847
069848
069849
069850
069851
069852
069853
069854
069855
069856
069857
069858
Page
Sleeve Bearings
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
Part Number
SLEEVOIL
069739
069740
069741
069742
069743
069744
069745
069746
069747
069748
069749
069750
069751
069752
069753
069754
069755
069756
069757
069758
069759
069760
069761
069762
069763
069764
069765
069766
069767
069768
069769
069770
069771
069772
069773
069774
069775
069776
069777
069778
069779
069780
069781
069782
069783
069784
069785
069786
069787
069788
069789
069790
069791
069792
069793
069794
069795
069796
069797
069798
Page
Take-Up Frames
B14-67
B14-67
B14-67
B14-67
B14-67
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-69
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-73
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-71
B14-73
B14-73
B14-73
B14-73
Part Number
Engineering
069679
069680
069681
069682
069683
069684
069685
069686
069687
069688
069689
069690
069691
069692
069693
069694
069695
069696
069697
069698
069699
069700
069701
069702
069703
069704
069705
069706
069707
069708
069709
069710
069711
069712
069713
069714
069715
069716
069717
069718
069719
069720
069721
069722
069723
069724
069725
069726
069727
069728
069729
069730
069731
069732
069733
069734
069735
069736
069737
069738
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
069919
069920
069921
069922
069923
069924
069925
069926
069927
069928
069929
069930
069931
069932
069960
SLEEVOIL
069961
069962
069963
069964
069965
Take-Up Frames
069966
069967
069968
069969
Engineering
Part Number Index
Keyword Index
069970
069971
069972
069973
069975
069983
069984
070000
070001
070002
070003
070004
070005
070006
070007
070008
070009
070010
070011
070012
070013
070014
070015
070016
070017
070018
Page
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85, B14-89
B14-85
B14-85, B14-89
B14-85, B14-89
B14-85
B14-85
B14-85
B14-85
B12-51, B14-107,
B14-110, B16-21
B12-51, B14-107,
B14-110, B16-21
B12-51, B14-107,
B14-110, B16-21
B12-51, B14-107,
B14-110, B16-21
B12-51, B14-107,
B14-110, B16-21
B12-51, B14-107,
B14-110, B16-21
B12-51, B14-107,
B14-110, B16-21
B12-51, B14-107,
B14-110, B16-21
B12-51, B14-107,
B14-110, B16-21
B12-51, B14-107,
B14-110, B16-21
B12-51
B12-51
B12-51
B12-51
B12-51
B16-21
B16-21
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
Part Number
070019
070020
070021
070022
070023
070024
070025
070026
070027
070028
070029
070030
070031
070053
070054
070055
070056
070057
070058
070059
070060
070061
070062
070063
070064
070065
070066
070067
070068
070069
070070
070071
070072
070073
070074
070075
070076
070077
070078
070079
070080
070081
070082
070083
070084
070085
070086
070087
070088
070089
070090
070091
070092
070093
070094
070095
070096
070097
070160
070161
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B12-49
B16-14
B14-52
B14-52
B14-52
B14-52
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-52
B14-52
B14-52
B14-52
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-52
B14-52
B14-52
B14-52
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-52
B14-52
B14-52
B14-52
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-54
B14-106
B14-106
Page
Part Number
070162
070163
070164
070165
070166
070167
070168
070169
070170
070171
070172
070173
070174
070175
070176
070177
070178
070179
070180
070181
070182
070183
070184
070185
070186
070187
070188
070189
070190
070191
070192
070193
070194
070240
070241
070242
070243
070244
070245
070246
070247
070248
070249
070250
070251
070252
070253
070254
070255
070256
070257
070258
070259
070260
070261
070262
070263
070264
070265
070266
INDEX-24
Page
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B12-50, B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B14-106
B12-50, B14-106
B14-106
B14-106
B12-50, B14-106
B14-106
B12-50, B14-106
B14-106
B12-50, B14-106
B14-106
B12-50
B12-50
B12-50
B12-50
B12-50
B12-50
B12-50
B12-50
B12-50
B12-50
B12-50
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
Part Number
070267
070272
070273
070274
070276
070277
070278
070279
070280
070282
070284
070285
070286
070288
070290
070295
070296
070297
070299
070300
070301
070302
070303
070305
070307
070308
070309
070311
070313
070318
070319
070320
070322
070323
070324
070325
070326
070328
070330
070331
070332
070334
070336
070341
070342
070343
070345
070346
070347
070348
070349
070351
070353
070354
070355
070357
070359
070361
070362
070363
B16-21
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-15
B12-23
B12-23
B12-23
Page
INDEX-25
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B16-21
B12-39, B12-41
B12-39, B12-41
B12-39
B12-39, B12-41
B12-39
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39
B12-39
B12-39, B12-41
B12-39, B12-41
B12-39
B12-39, B12-41
B12-39
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39
B12-39
Part Number
070698
070699
070700
070702
070703
070704
070705
070706
070708
070710
070711
070712
070714
070716
070718
070720
070725
070726
070727
070729
070730
070731
070732
070733
070735
070737
070738
070739
070741
070743
070745
070747
070752
070753
070754
070756
070757
070758
070759
070760
070762
070764
070765
070766
070768
070770
070772
070774
070779
070780
070781
070783
070784
070785
070786
070787
070789
070791
070792
070793
Page
B12-39, B12-41
B12-39, B12-41
B12-39
B12-39, B12-41
B12-39
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39
B12-39
B12-39, B12-41
B12-39, B12-41
B12-39
B12-39, B12-41
B12-39
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39, B12-41
B12-39
B12-39
B12-43
B12-43
B12-43
B12-43
B12-43
B12-43
B12-43
B12-43
B12-45
B12-45
B12-45
B12-45
B12-45
B12-45
B12-45
B12-45
B12-43
B12-43
B12-43
B12-43
B12-43
B12-43
B12-43
B12-43
B12-45
B12-45
B12-45
B12-45
Plummer Blocks
070604
070605
070606
070607
070608
070610
070612
070613
070614
070616
070618
070620
070621
070622
070623
070624
070625
070626
070627
070628
070629
070630
070631
070632
070633
070634
070635
070636
070644
070645
070646
070648
070649
070650
070651
070652
070654
070656
070657
070658
070660
070662
070664
070666
070671
070672
070673
070675
070676
070677
070678
070679
070681
070683
070684
070685
070687
070689
070691
070693
Page
Sleeve Bearings
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
Part Number
SLEEVOIL
070478
070480
070482
070483
070484
070491
070492
070493
070495
070496
070497
070498
070499
070501
070503
070504
070505
070523
070524
070525
070527
070528
070529
070530
070531
070533
070535
070536
070537
070541
070542
070543
070545
070546
070547
070548
070549
070551
070553
070554
070555
070557
070559
070564
070565
070566
070568
070569
070570
070571
070572
070574
070576
070577
070578
070580
070582
070600
070601
070602
Page
Take-Up Frames
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-23
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
B12-31
Part Number
Engineering
070365
070367
070368
070369
070371
070373
070375
070377
070379
070380
070381
070383
070385
070386
070387
070389
070391
070393
070395
070397
070398
070399
070401
070403
070404
070405
070407
070409
070411
070413
070415
070416
070417
070419
070421
070422
070423
070425
070427
070429
070431
070436
070437
070438
070440
070441
070442
070443
070444
070446
070448
070449
070450
070470
070471
070472
070474
070475
070476
070477
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
070795
070797
070799
070801
070811
070812
070813
070815
070817
070818
070819
070821
070823
070825
070827
070829
070830
070831
070833
070835
070836
070837
070839
070841
070843
070845
070853
070854
070855
070857
070858
070859
070860
070861
070863
070865
070866
070867
070869
070871
070880
070881
070882
070883
070884
070885
070886
070887
070888
070889
070890
070891
070892
070893
070894
070895
070896
070897
070898
070899
Page
B12-45
B12-45
B12-45
B12-45
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-47
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B12-33
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-101
B14-101, B14-103
B14-101
B14-101
B14-101
B14-101, B14-103
Part Number
070900
070901
070902
070903
070904
070905
070906
070907
070908
070909
070910
070911
070912
070913
070914
070915
070916
070917
070918
070919
070920
070921
070922
070923
070924
070925
070926
070927
070928
070929
070930
070931
070932
070933
070934
070935
070936
070937
070938
070939
070940
070941
070942
070943
070951
070952
070953
070954
070955
070956
070957
070958
070959
070960
070961
070962
070963
070964
070965
070966
Page
B14-101
B14-101
B14-101
B14-101, B14-103
B14-101
B14-101
B14-101, B14-103
B14-101
B14-101
B14-101
B14-101
B14-101
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-100
B14-101
B14-101, B14-103
B14-101
B14-101
B14-101
B14-101, B14-103
B14-101
B14-101
B14-101
B14-101, B14-103
B14-101
B14-101
B14-101, B14-103
B14-101
B14-101
B14-101
B14-101
B14-101
B14-52
B14-52
B14-52
B14-52
B14-52
B14-52
B14-52
B14-52
B14-52
B14-52
B14-52
B14-52
B14-52
B14-52
B14-52
B14-52
Part Number
071000
071001
071002
071003
071004
071005
071006
071007
071008
071009
071010
071011
071012
071013
071014
071015
071016
071017
071018
071019
071020
071021
071022
071023
071024
071025
071026
071027
071028
071029
071030
071031
071032
071033
071034
071035
071036
071037
071038
071039
071040
071041
071042
071043
071044
071045
071046
071047
071048
071049
071050
071051
071052
071053
071054
071055
071056
071057
071058
INDEX-26
Page
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B16-12,
B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-12, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
Part Number
071059
071060
071061
071062
071063
071064
071065
071066
071067
071068
071069
071070
071071
071072
071073
071074
071075
071076
071077
071078
071079
071080
071081
071082
071083
071084
071085
071086
071087
071088
071089
071090
071091
071092
071093
071094
071095
071096
071097
071098
071099
071100
071101
071102
071103
071104
071105
071106
071107
071108
071109
071114
071115
071116
071117
071118
071119
071120
071121
071122
Page
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-14, B14-63
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-17
B16-12, B14-63
B16-12, B14-63
B16-14, B14-63
B16-14, B14-63
B16-12, B14-63
B16-12, B14-63
B16-14, B14-63
B16-14, B14-63
B16-12
B16-12
B16-17
B16-17
B16-17
B16-17
B14-35
B14-35
B14-35
INDEX-27
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-89
B14-89
B14-89
B14-89
B14-89
B14-89
B14-89
B14-89
B14-89
B14-89
B14-89
B14-89
B14-89
B14-89
B14-89
B14-89
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-77
B14-77
B14-77
B14-77
B14-77
Part Number
071303
071304
071305
071306
071307
071308
071309
071310
071311
071312
071313
071314
071315
071316
071317
071318
071319
071320
071321
071322
071323
071324
071325
071326
071327
071328
071329
071330
071331
071332
071333
071334
071335
071336
071337
071338
071339
071340
071341
071342
071343
071344
071345
071346
071347
071348
071349
071350
071351
071352
071353
071354
071355
071356
071357
071358
071359
071360
071361
071362
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
Page
Plummer Blocks
071243
071244
071245
071246
071247
071248
071249
071250
071251
071252
071253
071254
071255
071256
071257
071258
071259
071260
071261
071262
071263
071264
071265
071266
071267
071268
071269
071270
071271
071272
071273
071274
071275
071276
071277
071278
071279
071280
071281
071282
071283
071284
071285
071286
071287
071288
071289
071290
071291
071292
071293
071294
071295
071296
071297
071298
071299
071300
071301
071302
Page
Sleeve Bearings
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
Part Number
SLEEVOIL
071183
071184
071185
071186
071187
071188
071189
071190
071191
071192
071193
071194
071195
071196
071197
071198
071199
071200
071201
071202
071203
071204
071205
071206
071207
071208
071209
071210
071211
071212
071213
071214
071215
071216
071217
071218
071219
071220
071221
071222
071223
071224
071225
071226
071227
071228
071229
071230
071231
071232
071233
071234
071235
071236
071237
071238
071239
071240
071241
071242
Page
Take-Up Frames
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-35
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
B14-37
Part Number
Engineering
071123
071124
071125
071126
071127
071128
071129
071130
071131
071132
071133
071134
071135
071136
071137
071138
071139
071140
071141
071142
071143
071144
071145
071146
071147
071148
071149
071150
071151
071152
071153
071154
071155
071156
071157
071158
071159
071160
071161
071162
071163
071164
071165
071166
071167
071168
071169
071170
071171
071172
071173
071174
071175
071176
071177
071178
071179
071180
071181
071182
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
071364
071365
071366
071367
071368
071369
071370
071371
071372
071373
071374
071375
071376
071377
071378
071379
071380
071381
071382
071383
071384
071385
071386
071387
071388
071389
071390
071391
071392
071393
071394
071395
071396
071397
071398
071399
071400
071401
071402
071403
071404
071405
071406
071407
071408
071409
071410
071411
071412
071413
071414
071415
071416
071417
071418
071419
071420
071421
071422
071423
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-75
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B14-77
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
Page
Part Number
071424
071425
071426
071427
071428
071429
071430
071431
071432
071433
071434
071435
071436
071437
071438
071439
071440
071441
071442
071443
071444
071445
071446
071447
071448
071449
071450
071451
071452
071453
071454
071455
071456
071457
071458
071459
071460
071461
071462
071463
071464
071469
071470
071471
071472
071473
071474
071475
071476
071477
071478
071479
071480
071481
071482
071483
071484
071485
071486
071487
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-17
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-25
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
Page
Part Number
071488
071489
071490
071491
071492
071493
071494
071495
071496
071497
071498
071499
071500
071501
071502
071503
071504
071505
071506
071507
071508
071509
071510
071511
071512
071513
071514
071515
071516
071517
071518
071519
071520
071521
071522
071523
071524
071525
071526
071527
071528
071576
071577
071578
071579
071580
071581
071582
071583
071584
071585
071586
071587
071590
071591
071592
071593
071594
071595
071610
INDEX-28
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-35
B12-41
B12-41
B12-41
B12-41
B12-41
B12-41
B12-41
B12-41
B14-87
B14-87
B14-87
B14-87
B14-87
B14-87
B14-87
B14-87
B14-87
B14-87
B14-87
B14-87
B14-100
B14-100
B14-101
B14-100
B14-100
B14-101
B14-47
Page
Part Number
071611
071612
071613
071614
071615
071616
071617
071618
071619
071620
071621
071622
071623
071624
071625
071626
071627
071628
071629
071630
071631
071632
071633
071634
071635
071636
071637
071638
071639
071640
071641
071650
071651
071652
071653
071654
071655
071656
071657
071658
071659
071660
071661
071662
071663
071664
071665
071666
071667
071668
071669
071670
071671
071672
071673
071674
071675
071676
071677
071678
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-47
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
Page
INDEX-29
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
B14-51
Part Number
071937
071938
071939
071940
071941
071942
071943
071944
071945
071946
071947
071948
071949
071950
071951
071952
071953
071954
071955
071956
071957
071958
071959
071960
071961
071962
071963
071964
071965
071966
071967
071968
071969
071970
071971
071972
071973
071974
071975
071976
071977
071983
071984
071985
071986
071987
071988
071989
071990
071991
071992
071993
071994
071995
071996
071997
071998
072000
072001
072002
B14-51
B14-51
B14-51
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-21
B12-29
B12-29
B12-29
B12-29
B12-29
B12-29
B12-29
B12-29
B12-29
B12-29
B12-29
B12-29
B12-29
B12-29
B12-29
B12-29
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B14-60
B14-60
B14-60
Page
Plummer Blocks
071877
071878
071879
071880
071881
071882
071883
071884
071885
071886
071887
071888
071889
071890
071891
071892
071893
071894
071895
071896
071897
071898
071899
071900
071901
071902
071903
071904
071905
071906
071907
071908
071909
071910
071911
071912
071913
071914
071915
071916
071917
071918
071919
071920
071921
071922
071923
071924
071925
071926
071927
071928
071929
071930
071931
071932
071933
071934
071935
071936
Page
Sleeve Bearings
B14-49
B14-49
B14-49
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-19
B12-27
B12-27
B12-27
B12-27
B12-27
B12-27
B12-27
B12-27
B12-27
B12-27
B12-27
B12-27
B12-27
B12-27
B12-27
B12-27
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
B14-41
Part Number
SLEEVOIL
071739
071740
071741
071790
071791
071792
071793
071794
071795
071796
071797
071798
071799
071800
071801
071802
071803
071804
071805
071806
071807
071808
071809
071810
071811
071812
071813
071814
071815
071816
071817
071821
071822
071823
071824
071825
071826
071827
071828
071832
071833
071834
071835
071836
071837
071838
071839
071864
071865
071866
071867
071868
071869
071870
071871
071872
071873
071874
071875
071876
Page
Take-Up Frames
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-38
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
B14-49
Part Number
Engineering
071679
071680
071681
071682
071683
071684
071685
071686
071687
071688
071689
071690
071691
071692
071693
071694
071695
071696
071697
071698
071699
071700
071701
071702
071703
071704
071705
071706
071707
071708
071709
071710
071711
071712
071713
071714
071715
071716
071717
071718
071719
071720
071721
071722
071723
071724
071725
071726
071727
071728
071729
071730
071731
071732
071733
071734
071735
071736
071737
071738
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
072003
072004
072005
072006
072014
072015
072016
072017
072018
072019
072020
072170
072171
072172
072173
072174
072175
072176
072177
072178
072179
072180
072181
072182
072183
072184
072185
072186
072187
072188
072189
072190
072191
072192
072193
072194
072195
072196
072197
072198
072199
072200
072201
072202
072203
072204
072205
072206
072207
072208
072209
072210
072211
072212
072213
072214
072215
072216
072217
072218
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-78
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
Page
Part Number
072219
072220
072221
072222
072223
072224
072225
072226
072227
072228
072229
072230
072231
072232
072233
072234
072235
072237
072238
072239
072240
072241
072242
072243
072244
072245
072246
072247
072248
072249
072250
072251
072252
072253
072254
072255
072256
072257
072258
072259
072260
072262
072263
072264
072265
072266
072267
072268
072269
072270
072271
072272
072273
072274
072275
072276
072277
072278
072279
072280
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-79
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-80
B14-91
B14-91
B14-91
B14-91
B14-91
Page
Part Number
072281
072282
072283
072284
072285
072286
072287
072288
072289
072290
072291
072292
072293
072294
072295
072296
072297
072298
072299
072300
072301
072302
072303
072304
072305
072306
072307
072308
072309
072310
072311
072312
072313
072314
072315
072316
072317
072318
072319
072320
072321
072322
072323
072324
072325
072326
072327
072328
072329
072330
072331
072332
072333
072334
072335
072336
072337
072338
072339
072340
INDEX-30
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-91
B14-94
B14-94
B14-94
Page
Part Number
072341
072342
072343
072344
072345
072346
072347
072348
072349
072350
072351
072352
072353
072354
072355
072356
072358
072359
072360
072361
072362
072363
072364
072365
072366
072367
072368
072369
072370
072371
072372
072373
072374
072375
072376
072377
072378
072379
072380
072382
072383
072384
072385
072386
072387
072388
072389
072390
072391
072392
072393
072394
072395
072396
072397
072398
072399
072400
072401
072402
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B14-94
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
Page
INDEX-31
B4-100
B2-24
B2-30
B4-100
B6-52
B14-58
B14-58
B6-31
B4-50
B5-28
B2-64
B6-34
B4-100
B4-12
B4-84
B6-22
B6-53
B6-36
B4-24
B4-14
B2-31
B2-54
B4-28
B4-24
B4-72
B6-22
B4-42
B14-56
B14-56
B4-90, B4-94
B2-56
B2-56
B4-34
B4-50
B6-50
B4-16
B6-28
B4-56
B4-100
B4-74
B6-22
B5-28
B5-28
B4-62
B6-22
B6-12
B6-12
B14-58
B4-60
B5-12
B4-70
B4-18
B4-59
B5-34
B14-60
B14-60
B4-12
B6-44
B4-99
B4-100
Part Number
074254
074287
074288
074308
074353
074372
074381
074396
074505
074512
074530
074593
074613
074614
074631
074632
074714
074781
074782
074818
074828
074867
074868
074926
074935
074989
075014
075020
075045
075048
075049
075051
075052
075096
075105
075153
075154
075221
075222
075248
075262
075286
075306
075313
075314
075329
075431
075432
075444
075489
075524
075546
075676
075677
075679
075697
075700
075714
075728
075765
B6-50
B4-48
B4-48
B6-46
B5-14
B6-42
B4-28
B4-40
B4-88
B2-26
B4-99
B6-12
B14-58
B14-58
B2-26
B2-64
B4-54
B6-34
B6-34
B6-28
B4-99
B14-58
B14-58
B4-24
B4-74
B16-14
B4-90
B4-62
B6-12
B6-16
B6-16
B6-16
B6-16
B2-46
B4-26
B6-46
B16-14
B5-28
B5-28
B2-31
B4-28
B6-51
B14-58
B5-44
B5-44
B4-16
B14-58
B14-58
B14-58
B5-32
B6-54
B3-8
B5-28
B5-28
B5-38
B3-18
B5-36
B4-90, B4-94
B6-54
B4-54
Page
Plummer Blocks
073006
073007
073008
073065
073069
073070
073071
073072
073139
073222
073224
073279
073280
073282
073287
073304
073332
073338
073358
073381
073396
073406
073416
073418
073430
073479
073492
073561
073562
073634
073638
073651
073662
073669
073687
073724
073753
073769
073772
073793
073848
073849
073850
073911
073914
073924
073926
073938
073950
073960
073970
073992
074008
074017
074115
074117
074162
074163
074223
074237
Page
Sleeve Bearings
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-60
B14-60
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-65, B16-20
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
Part Number
SLEEVOIL
072692
072693
072706
072708
072710
072711
072742
072744
072746
072747
072771
072772
072786
072789
072791
072792
072820
072822
072831
072833
072835
072836
072857
072859
072895
072896
072897
072898
072899
072900
072901
072902
072903
072904
072905
072906
072907
072910
072911
072912
072913
072914
072915
072916
072917
072918
072919
072920
072921
072922
072923
072924
072954
072955
072958
072959
072962
072963
072966
072967
Page
Take-Up Frames
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B12-37
B14-60
B14-60
B14-106
B14-106
B14-106
B12-50, B14-106
B12-50, B14-106
B12-50, B14-106
B12-50, B14-106
B14-106
B12-50, B14-106
B12-50, B14-106
B12-50, B14-106
B14-106
B12-50, B14-106
B12-50, B14-106
B12-50, B14-106
B14-106
B14-106
B14-106
B12-50, B14-106
B14-106
B12-50, B14-106
B14-106
B12-50, B14-106
B12-50, B14-106
B14-106
B14-106
B12-50, B14-106
B14-106
B14-106
B12-50, B14-106
B14-106
B14-106
B12-50
B14-106
B14-106
B12-50
B14-106
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
B14-60
Part Number
Engineering
072403
072404
072405
072406
072407
072408
072409
072410
072411
072412
072413
072490
072492
072500
072501
072502
072503
072504
072505
072506
072507
072508
072509
072510
072511
072512
072513
072514
072515
072516
072517
072518
072519
072520
072521
072522
072523
072524
072525
072526
072527
072528
072529
072530
072531
072532
072533
072534
072535
072536
072564
072565
072566
072567
072572
072573
072574
072575
072688
072690
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
075775
075792
075913
076000
076001
076002
076003
076004
076005
076006
076007
076008
076009
076010
076011
076012
076014
076015
076016
076017
076018
076019
076020
076021
076022
076023
076024
076025
076026
076027
076028
076029
076030
076031
076032
076033
076034
076035
076036
076037
076038
076039
076040
076041
076042
076043
076044
076045
076046
076047
076048
076049
076050
076051
076052
076053
076054
076055
076056
076057
B3-21
B5-44
B2-35
B3-8
B3-8
B3-8
B3-8
B3-8
B3-8, B3-14
B3-8
B3-8
B3-10
B3-10
B3-10
B3-10
B3-10
B3-10
B3-10
B3-10
B3-16
B3-16
B3-16
B3-16
B3-16
B3-16
B3-16
B3-16
B3-16
B3-16
B3-16
B3-16
B3-16
B3-16
B3-17
B3-17
B3-17
B3-17
B3-17
B3-17
B3-17
B3-17
B3-18
B3-18
B3-18
B3-18
B3-18
B3-18
B3-18
B3-20
B3-20
B3-20
B3-20
B3-20
B3-20
B3-20
B3-20
B3-20
B3-21
B3-21
B3-21
Page
Part Number
076058
076059
076060
076061
076062
076063
076064
076065
076066
076067
076068
076069
076070
076071
076072
076073
076074
076075
076076
076077
076078
076079
076080
076081
076082
076083
076084
076085
076086
076087
076088
076089
076090
076091
076092
076093
076094
076095
076096
076097
076098
076099
076100
076101
076102
076103
076104
076105
076106
076107
076108
076109
076110
076111
076112
076113
076114
076115
076116
076117
B3-21
B3-21
B3-21
B3-21
B3-21
B3-23
B3-23
B3-23, B3-24
B3-23
B3-23
B3-23
B3-23
B3-23
B3-23
B3-23
B3-23
B3-23
B3-23
B3-25
B3-25
B3-25
B3-25
B3-25
B3-25, B3-28
B3-25
B3-25
B3-26
B3-26
B3-26
B3-26
B3-26
B3-26
B3-26
B3-30
B3-30
B3-30
B3-30
B3-30
B3-30, B3-34
B3-30
B3-30
B3-30
B3-32
B3-32
B3-32
B3-32
B3-32
B3-32
B3-32
B3-32
B3-38
B3-38
B3-38
B3-38
B3-38
B3-38, B3-40
B3-38
B3-38
B3-39, B3-40
B3-39
Page
Part Number
076118
076119
076120
076121
076122
076123
076124
076125
076126
076127
076128
076129
076130
076131
076132
076133
076134
076135
076136
076137
076138
076139
076140
076141
076142
076143
076144
076145
076146
076147
076148
076149
076150
076151
076152
076153
076154
076155
076156
076157
076158
076159
076160
076161
076162
076163
076164
076165
076166
076167
076168
076169
076170
076171
076172
076173
076174
076175
076176
076177
INDEX-32
B3-39
B3-39
B3-39
B3-39
B3-39
B3-39
B3-39
B3-14
B3-14
B3-14
B3-14
B3-14
B3-14
B3-14
B3-10, B3-14
B3-10, B3-14
B3-14
B3-10, B3-14
B3-14
B3-14
B3-14
B3-14
B3-14
B3-19
B3-19
B3-19
B3-19
B3-19
B3-19
B3-19
B3-18, B3-19
B3-19
B3-22
B3-22
B3-22
B3-22
B3-22
B3-22
B3-22
B3-21, B3-22
B3-22
B3-22
B3-21, B3-22
B3-22
B3-22
B3-22, B3-23
B3-22
B3-22
B3-24
B3-24
B3-24
B3-24
B3-24
B3-24
B3-24
B3-24
B3-24
B3-24
B3-23, B3-24
B3-24
Page
Part Number
076178
076179
076180
076181
076182
076183
076184
076185
076186
076187
076188
076189
076190
076191
076192
076193
076194
076195
076196
076197
076198
076199
076200
076201
076202
076203
076204
076205
076206
076207
076208
076209
076210
076211
076212
076213
076214
076215
076216
076217
076218
076219
076220
076221
076222
076223
076224
076225
076226
076227
076228
076229
076230
076231
076232
076233
076234
076235
076236
076237
B3-24
B3-24
B3-24
B3-28
B3-28
B3-28
B3-28
B3-28
B3-28
B3-28
B3-26, B3-28
B3-28
B3-34
B3-34
B3-34
B3-34
B3-34
B3-34
B3-36
B3-32, B3-36
B3-36
B3-36
B3-32, B3-36
B3-36
B3-36
B3-36
B3-40
B3-40
B3-40
B3-40
B3-40
B3-40
B3-40
B3-39, B3-40
B3-40
B3-40
B3-39, B3-40
B3-40
B3-40
B3-40
B3-40
B3-40
B3-8
B3-8
B3-8
B3-8
B3-10
B3-10
B3-10
B3-10
B3-10
B3-10
B3-10
B3-16
B3-16
B3-16
B3-16
B3-16
B3-16
B3-16
Page
INDEX-33
077237
077238
077239
077240
077241
077242
077243
077244
077245
077246
077247
077248
077249
077250
077251
077252
077253
077254
077255
077256
077257
077258
077259
077260
077261
077262
077263
077264
077265
077266
077267
077268
077269
077270
077271
077272
077273
077274
077275
077276
077277
077278
077279
077280
077281
077282
077283
077284
077285
077286
077287
077288
077289
077290
077291
077292
077293
077294
077295
077296
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
B10-36
Page
Plummer Blocks
B3-28
B3-12
B6-22
B4-100
B2-32
B4-38
B6-34
B4-58
B3-22
B3-21
B16-14
B6-16
B5-14
B6-46
B2-56
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-39
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
B10-34
Part Number
Sleeve Bearings
076416
076545
076548
076558
076584
076602
076608
076609
076648
076649
076670
076714
076763
076777
076841
077192
077193
077194
077195
077196
077197
077198
077199
077200
077201
077202
077203
077204
077205
077206
077207
077208
077209
077210
077211
077212
077213
077214
077215
077216
077217
077218
077219
077220
077221
077222
077223
077224
077225
077226
077227
077228
077229
077230
077231
077232
077233
077234
077235
077236
Page
SLEEVOIL
Part Number
Take-Up Frames
B3-16
B3-17
B3-17
B3-17
B3-17
B3-18
B3-18
B3-18
B3-20
B3-20
B3-20
B3-20
B3-20
B3-21
B3-21
B3-21
B3-21
B3-21
B3-21
B3-23
B3-23
B3-23
B3-23
B3-23
B3-23
B3-23
B3-23
B3-25
B3-25
B3-25
B3-25
B3-26
B3-26
B3-26
B3-26
B3-26
B3-30
B3-30
B3-30
B3-30
B3-30
B3-32
B3-32
B3-32
B3-32
B3-32
B3-32
B3-38
B3-38, B3-40
B3-38
B3-39
B3-39
B3-39
B3-39
B3-39
B3-39
B3-39
B3-14
B3-14
B3-14
Part Number
Page
076299 B3-14
076300 B3-14
076301 B3-14
076302 B3-14
076303 B3-14
076304 B3-14
076305 B3-14
076306 B3-14
076307 B3-19
076308 B3-19
076309 B3-19
076310 B3-19
076311 B3-19
076312 B3-19
076313 B3-22
076314 B3-22
076315 B3-22
076316 B3-22
076317 B3-22, B3-24
076318 B3-22
076319 B3-22
076320 B3-22
076321 B3-22
076322 B3-22
076323 B3-22
076324 B3-24
076325 B3-24
076326 B3-24
076328 B3-24
076329 B3-24
076330 B3-24
076331 B3-24
076332 B3-24
076333 B3-24
076334 B3-34
076335 B3-34
076336 B3-34
076337 B3-34
076338 B3-34
076339 B3-36
076340 B3-36
076341 B3-36
076342 B3-36
076343 B3-36
076344 B3-40
076346 B3-40
076347 B3-40
076348 B3-40
076349 B3-40
076350 B3-40
076351 B3-40
076352 B3-40
076353 B3-40
076354 B3-40
076410 B3-28
076411 B3-28
076412 B3-28
076413 B3-28
076414 B3-28
076415 B3-28
Engineering
076238
076239
076240
076241
076242
076243
076244
076245
076246
076247
076248
076249
076250
076251
076252
076253
076254
076255
076256
076257
076258
076259
076260
076261
076262
076263
076264
076265
076266
076267
076268
076269
076270
076271
076272
076273
076274
076275
076276
076277
076278
076279
076280
076281
076282
076283
076284
076286
076287
076288
076289
076290
076291
076292
076293
076294
076295
076296
076297
076298
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
077297
077298
077299
077300
077416
077417
077418
077453
077458
077462
077471
077473
077481
077561
077646
077647
077648
077649
077650
077651
077652
077660
077661
077662
077773
077777
077897
077921
077923
077940
077941
077942
077943
077944
077945
077946
077947
077948
077949
077950
077957
077958
077959
077960
077976
077977
077978
077979
077980
077981
077982
077983
077984
077985
077986
077993
077995
077996
079991
079992
B10-36
B10-36
B10-36
B10-36
B5-12
B5-12
B3-16
B3-12
B14-58
B3-26
B5-18
B14-58
B16-14
B14-58
B14-56
B14-56
B14-56
B14-56
B14-56
B14-56
B14-58
B14-58
B14-58
B14-58
B3-18
B4-26
B14-58
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B4-97
B16-17
B16-17
Page
Part Number
079993
087172
087178
087180
087181
087182
087183
087184
087185
087186
087187
087188
087189
087190
087191
087192
087193
087194
087195
087196
087197
087198
087199
087200
087205
087207
087209
087210
087211
087212
087215
087218
087220
087221
087222
087224
087225
087262
087263
087264
087265
087266
087267
087268
087269
089020
089021
089022
089023
089024
089025
089026
089027
089028
089029
089030
089031
089032
089033
089034
B16-17
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-11
B11-11
B11-11
B11-11
B11-11
B11-11
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-14
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B11-9
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
Page
Part Number
089035
089036
089037
089038
089039
089040
089041
089042
089043
089044
089045
089046
089047
089048
089150
089151
089152
089153
089154
089155
089156
089600
089601
089602
089603
089604
089782
089783
089784
089785
089786
089787
089788
089789
089790
089791
089792
089793
089794
089795
089796
089797
089798
089799
089800
089801
089802
089803
089804
093733
104003
104006
104010
104013
104016
104017
104018
104019
104020
104021
INDEX-34
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-37
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B19-15
B4-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
Page
Part Number
104022
104023
104024
104025
104026
104027
104028
104029
104030
104031
104032
104033
104034
104035
104036
104037
104038
104039
104040
104041
104042
104043
104044
104045
104046
104050
104051
104052
104053
104054
104055
104056
104078
104090
104106
104119
104160
104161
104162
104164
104169
104170
104172
104173
104176
104177
104181
104195
104196
104197
104199
104204
104205
104207
104208
104211
104212
104216
123069
123070
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-13
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B11-36
B2-42
B2-42
Page
INDEX-35
B4-38
B4-38
B4-38, B4-44
B4-38
B4-39
B4-39
B4-39
B4-39
B4-58
B4-58
B4-58
B4-58, B4-62
B4-58
B4-58
B4-59
B4-59
B4-59
B4-59
B4-59
B4-59
B4-12
B4-12
B4-44
B4-44
B4-44
B4-44
B4-62
B4-62
B4-62
B4-62
B4-62
B4-62
B4-62
B4-62
B4-62
B4-62
B4-12
B4-14
B4-14
B4-14
B4-16
B4-12
B4-14
B4-12
B4-12
B4-12
B4-12
B4-12
B4-12
B4-12
B4-12, B4-24, B4-26
B4-12
B4-12
B4-12
B4-14
B4-14
B4-14
B4-14
B4-14
B4-14
Part Number
123820
123821
123822
123823
123824
123828
123829
123830
123831
123835
123836
123839
123854
123855
123856
123857
123858
123860
123861
123862
123863
123864
123865
123866
123867
123868
123869
123870
123871
123872
123873
123874
123875
123877
123878
123879
123894
123903
123904
123905
123906
123907
123908
123909
123910
123911
123912
123913
123914
123915
123916
123918
123919
123932
123933
123936
123938
123939
123958
123959
B4-14
B4-14
B4-14
B4-14
B4-12
B4-12
B4-14
B4-12, B4-20
B4-12, B4-20
B4-12
B4-12
B4-14
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-20
B4-12
B4-12
B4-12
B4-12
B4-16
B4-16
B4-16
B4-16
B4-16, B4-28
B4-16
B4-18
B4-18
B4-18
B4-18
B4-18
B4-18
B4-18
B4-16
B4-22
B4-16
B4-12
B4-12, B4-26
B4-22
B4-22
B4-14
B4-16, B4-22
B4-22
Page
Plummer Blocks
123731
123732
123733
123734
123735
123736
123737
123738
123740
123741
123742
123743
123744
123745
123746
123747
123748
123749
123750
123751
123753
123754
123755
123756
123757
123758
123760
123761
123762
123763
123764
123765
123766
123767
123768
123769
123781
123782
123783
123784
123790
123792
123793
123803
123804
123805
123806
123807
123808
123809
123810
123811
123812
123813
123814
123815
123816
123817
123818
123819
Page
Sleeve Bearings
B2-42
B2-42
B4-94
B4-94
B2-42
B4-88
B8-8
B8-8
B8-8
B8-10
B8-10
B8-10
B8-10
B8-10
B8-10
B4-20, B8-8
B8-8
B8-10
B8-12
B8-12
B8-12
B8-12
B8-12
B8-12
B8-12
B8-12
B8-12
B8-8
B8-12
B8-8
B8-12
B8-14
B8-14
B8-14
B8-14
B8-14
B8-14
B8-14
B8-14
B8-14
B8-14
B8-16
B8-16
B8-16
B8-16
B8-16
B8-16
B8-16
B8-16
B8-16
B8-16
B4-14
B8-16
B8-18
B4-22
B8-14
B4-16, B4-22
B4-20
B4-14
B4-38
Part Number
SLEEVOIL
123409
123413
123419
123420
123460
123469
123580
123581
123582
123583
123584
123585
123586
123587
123588
123589
123590
123593
123595
123596
123597
123598
123599
123600
123601
123602
123603
123604
123605
123606
123607
123610
123611
123612
123613
123614
123615
123616
123617
123618
123619
123625
123626
123627
123628
123629
123630
123631
123632
123633
123634
123636
123652
123680
123693
123694
123725
123727
123728
123730
Page
Take-Up Frames
B2-42
B2-42
B2-42
B2-42
B2-42
B2-42
B2-42
B4-12
B4-20
B4-34
B4-54
B4-70
B4-74
B4-86
B4-87
B4-16
B4-38
B2-42
B8-24
B4-90
B4-88, B4-97
B4-88, B4-97
B4-88
B4-88
B4-88
B4-88
B4-88
B4-88
B4-88
B4-88
B4-88
B4-88, B4-94
B4-88
B4-88
B4-90, B4-94
B4-90
B4-90
B4-90
B4-90
B4-90
B4-90
B4-90
B4-90
B4-90
B4-94
B4-94
B4-94
B4-94
B4-94
B4-90, B4-94
B4-94
B4-90, B4-94
B4-94
B4-90, B4-94
B4-94
B4-94
B4-94
B4-94
B4-94
B4-88
Part Number
Engineering
123071
123072
123073
123074
123075
123076
123077
123170
123171
123172
123173
123174
123175
123176
123177
123183
123184
123234
123235
123326
123328
123329
123330
123331
123332
123333
123334
123335
123336
123337
123338
123339
123340
123341
123342
123343
123344
123345
123346
123347
123348
123349
123350
123352
123353
123354
123355
123356
123357
123358
123359
123360
123361
123362
123363
123364
123365
123366
123367
123368
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
123960
123961
123962
123963
123964
123965
123966
123987
124034
124048
124049
124098
124099
124100
124101
124102
124103
124148
124149
124166
124167
124170
124171
124172
124173
124174
124175
124176
124198
124199
124204
124205
124206
124207
124208
124209
124210
124211
124212
124213
124214
124215
124216
124217
124218
124219
124220
124224
124225
124226
124227
124228
124229
124230
124231
124232
124233
124235
124236
124237
B4-22
B4-22
B4-22
B4-22
B4-22
B4-22
B4-22
B4-14
B4-36
B4-54
B4-54
B4-54
B4-54
B4-54
B4-54
B4-54
B4-54
B4-87
B4-87
B4-34
B4-34
B4-34
B4-34
B4-34
B4-34
B4-34
B4-34
B4-34
B4-34
B4-34
B4-54
B4-54
B4-54, B4-60
B4-54
B4-54
B4-56
B4-56
B4-56
B4-56
B4-56
B4-56
B4-56
B4-56
B4-56
B4-54
B4-54
B4-56
B4-66, B4-68
B4-66
B4-66
B4-66
B4-66
B4-66
B4-66
B4-66
B4-66
B4-66
B4-66
B4-66
B4-66
Page
Part Number
124240
124242
124244
124245
124246
124250
124251
124253
124256
124261
124268
124269
124270
124274
124275
124276
124277
124278
124279
124280
124282
124290
124291
124292
124293
124299
124373
124393
124394
124395
124404
124405
124406
124408
124409
124410
124411
124412
124413
124419
124420
124421
124422
124423
124424
124427
124428
124429
124430
124435
124436
124437
124438
124439
124440
124441
124442
124443
124444
124445
B4-86
B4-86
B4-38
B4-86
B4-58
B4-87
B4-87
B4-87
B4-34
B4-56
B4-36
B4-36
B4-36
B4-34
B4-34
B4-34, B4-42
B4-34
B4-34
B4-36
B4-36
B4-36
B4-84
B4-84
B4-84
B4-84
B4-84
B4-36
B4-86
B4-87
B4-59
B4-84
B4-84
B4-84
B4-84
B4-84
B4-34
B4-34
B4-36
B4-36
B4-84
B4-86
B4-86
B4-86
B4-86
B4-86
B4-87
B4-87
B4-87
B4-87
B4-50
B4-50
B4-50
B4-50
B4-50
B4-50
B4-50
B4-50
B4-50
B4-50
B4-50
Page
Part Number
124446
124447
124448
124450
124460
124461
124462
124463
124464
124465
124466
124467
124468
124469
124470
124471
124472
124473
124474
124478
124479
124480
124567
124578
124579
124582
124587
124590
124591
124600
124601
124602
124603
124604
124605
124606
124607
124608
124609
124610
124611
124612
124613
124614
124618
124620
124621
124622
124623
124624
124625
124626
124627
124628
124629
124630
124631
124632
124633
124634
INDEX-36
B4-50
B4-50
B4-50
B4-50
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B9-12
B4-32
B4-32
B4-32
B4-54
B4-66
B4-66
B4-66
B4-66
B9-22
B9-22
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-34
B4-34
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B4-52
B9-22
Page
Part Number
124640
124641
124642
124643
124644
124645
124646
124647
124648
124649
124650
124651
124652
124653
124660
124661
124662
124663
124664
124665
124666
124667
124668
124669
124670
124671
124672
124673
124676
124677
124678
124697
124729
124748
124749
124785
124794
124872
124931
124932
124933
124934
124941
124942
124943
124944
124996
125004
125005
125010
125011
125012
125050
125051
125052
125054
125071
125113
125114
125115
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B4-46
B9-18
B9-18
B9-18
B9-18
B4-66
B9-18
B9-18
B4-34
B4-39
B4-18
B2-42
B2-42
B8-10
B4-52
B4-20
B4-36
B4-20
B4-20
B4-84
B2-42
B2-42
B4-74
B4-74
B4-74
B4-70
B4-70
B4-70
B4-70
B4-76
B4-74
B4-74
B4-76
Page
INDEX-37
B4-97, B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B7-12
B7-12
B7-12
B7-12
B7-12
B7-18
B7-14
B7-14
B7-14
B7-14
B7-14
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B8-8
B8-8
B8-8
B8-8
B8-10
B8-12
B8-10
B8-10
B8-10
B8-16
B8-16
B8-16
B8-16
Part Number
125698
125699
125700
125701
125702
125703
125704
125705
125706
125707
125708
125709
125710
125711
125712
125713
125714
125715
125716
125717
125718
125719
125720
125721
125722
125723
125724
125725
125726
125727
125728
125730
125731
125732
125733
125734
125735
125736
125737
125751
125752
125760
125768
125800
125802
125804
125806
125808
125810
125812
125814
125816
125818
125820
125822
125825
125826
125828
125830
125832
B8-16
B8-16
B8-16
B8-16
B8-16
B8-14
B8-14
B8-14
B8-14
B8-14
B8-14
B8-14
B8-14
B9-6
B9-6
B9-6
B9-6
B9-6
B9-10
B9-8
B9-8
B9-8
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-16
B9-16
B9-16
B9-16
B9-16
B9-16
B9-16
B9-16
B8-8
B8-14
B4-20
B4-20
B4-88, B4-97
B4-88
B4-88
B4-88
B4-88
B4-90
B4-90
B4-90
B4-90
B4-90
B4-90
B4-90
B4-94
B4-94
B4-94
B4-94
B4-94
Page
Plummer Blocks
125636
125637
125638
125639
125640
125641
125642
125643
125644
125645
125646
125647
125648
125649
125650
125651
125652
125655
125656
125657
125658
125659
125660
125661
125662
125663
125664
125665
125666
125667
125668
125669
125670
125671
125672
125673
125674
125675
125676
125677
125678
125679
125680
125681
125682
125683
125684
125685
125686
125687
125688
125689
125690
125691
125692
125693
125694
125695
125696
125697
Page
Sleeve Bearings
B8-14
B8-14
B8-14
B8-14
B8-14
B8-14
B8-14
B8-14
B8-16
B8-16
B8-16
B8-16
B8-16
B8-16, B9-16
B8-16
B8-16
B8-18
B8-18
B8-18
B8-18
B8-18
B8-18
B8-18
B8-18
B8-18
B8-18
B8-18
B8-18
B8-18
B8-18
B8-18
B8-18
B8-20
B8-20
B8-20
B8-20
B8-20
B8-20
B8-20
B8-20
B8-20
B8-20
B8-22
B8-22
B8-22
B8-22
B8-22
B8-22
B8-22
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
Part Number
SLEEVOIL
125516
125517
125518
125519
125520
125521
125522
125523
125524
125525
125526
125527
125528
125529
125530
125531
125533
125534
125535
125536
125537
125538
125539
125540
125541
125542
125543
125544
125545
125546
125547
125548
125549
125550
125551
125552
125553
125554
125555
125556
125557
125558
125559
125560
125561
125562
125563
125564
125565
125625
125626
125627
125628
125629
125630
125631
125632
125633
125634
125635
Page
Take-Up Frames
B4-76
B4-76
B4-76
B4-76
B4-74
B4-76
B4-76
B4-70
B4-70, B4-73
B4-70
B4-72
B4-72
B4-72
B4-72
B4-72
B4-72
B4-14, B4-26
B4-56, B4-60
B4-36, B4-42
B4-70
B4-70
B4-74
B4-74
B4-74
B4-74
B4-74
B4-74
B4-74
B4-74, B4-78
B4-74
B4-76
B4-76
B4-76
B4-70
B4-70
B4-70
B4-70
B4-70
B4-72
B4-72
B4-72
B4-72
B4-70
B4-52
B8-8, B8-12
B8-8, B8-12
B8-8
B8-8
B8-8
B8-10
B8-10
B8-12
B8-12
B8-12
B8-12
B8-12
B8-12
B8-8
B8-8
B8-8
Part Number
Engineering
125116
125117
125118
125119
125120
125121
125151
125153
125154
125155
125156
125157
125158
125159
125160
125162
125169
125170
125171
125328
125329
125343
125344
125355
125356
125357
125358
125359
125360
125361
125362
125363
125364
125365
125366
125367
125368
125369
125370
125371
125372
125373
125378
125384
125500
125501
125502
125503
125504
125505
125506
125507
125508
125509
125510
125511
125512
125513
125514
125515
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
125834
125836
125838
125840
125842
125844
125850
125851
125852
125853
125854
125855
125856
125857
125858
125859
125860
125861
125862
125865
125866
125867
125868
125869
125870
125871
125872
125873
125874
125875
125876
125877
125878
125879
125880
125881
125882
125885
125886
125887
125888
125889
125890
125891
125892
125893
125894
125895
125896
125900
125901
125902
125903
125904
125905
125906
125907
125908
125910
125911
B4-94
B4-94
B4-94
B4-94
B4-94
B4-94
B4-12
B4-12
B4-12
B4-12
B4-12
B4-12
B4-20
B4-14
B4-14
B4-14
B4-14
B4-14
B4-14
B4-66
B4-66
B4-66
B4-66
B4-66
B4-66
B4-66
B4-66
B2-42
B2-42
B4-34
B4-34
B4-34
B4-34
B4-34
B4-36
B4-36
B4-36
B4-54
B4-54
B4-54
B4-54
B4-54
B4-56
B4-56
B4-56
B4-56
B4-56
B4-56
B4-56
B4-70
B4-70
B4-70
B4-70
B4-72
B4-72
B4-72
B4-72
B4-72
B4-74
B4-74
Page
Part Number
125912
125913
125914
125915
125916
125917
125918
125919
125925
125926
125927
125928
125929
125930
125931
125932
125933
125934
125935
125937
125940
125941
125942
125943
125944
125945
125946
125947
125948
125949
125954
125955
125956
125957
125958
125960
125965
125966
125967
125968
125969
125970
125971
125972
125973
125974
125975
125980
125981
125982
125983
125984
125985
125986
125989
125990
125991
125992
125993
125994
B4-74
B4-74
B4-74
B4-76
B4-76
B4-76
B4-76
B4-76
B4-24, B4-26
B4-24, B4-26
B4-24
B4-26
B4-24, B4-26
B4-24, B4-26
B4-24, B4-26
B4-26
B4-26
B4-26
B4-26
B4-26
B4-68
B4-68
B4-68
B4-68
B4-68
B4-68
B4-68
B4-68
B4-68
B4-68
B4-42
B4-42
B4-42
B4-42
B4-42
B4-42
B4-60
B4-60
B4-60
B4-60
B4-60
B4-60
B4-60
B4-60
B4-60
B4-60
B4-60
B4-73
B4-73
B4-73
B4-73
B4-73
B4-73
B4-73
B4-78
B4-78
B4-78
B4-78
B4-78
B4-80
Page
Part Number
125995
125996
125997
125998
126042
126049
126102
126110
126112
126121
126147
126148
126167
126168
126170
126171
126172
126173
126174
126175
126176
126177
126178
126179
126180
126182
126183
126184
126186
126187
126188
126189
126190
126191
126192
126193
126194
126195
126196
126197
126198
126199
126226
126227
126270
126283
126284
126285
126287
126288
126289
126290
126292
126293
126405
126406
126407
126408
126409
126415
INDEX-38
B4-80
B4-80
B4-80
B4-80
B4-36
B4-84
B4-34
B4-28
B4-28
B5-50
B4-24, B4-26
B4-26
B4-68
B4-68
B4-68
B4-68
B4-68
B4-68
B4-68
B4-66, B4-68
B4-68
B4-66, B4-68
B4-68
B4-66, B4-68
B4-68
B4-68
B4-68
B4-68
B4-60
B4-60
B4-60
B4-60
B4-60
B4-60
B4-56, B4-60
B4-60
B4-60
B4-56, B4-60
B4-60
B4-60
B4-60
B4-60
B4-60
B4-60
B4-60
B4-56, B4-60
B4-42
B4-42
B4-42
B4-42
B4-42
B4-42
B4-42
B4-36, B4-42
B4-24
B4-24
B4-24
B4-24
B4-24
B7-20
Page
Part Number
126416
126417
126418
126419
126450
126451
126452
126453
126454
126475
126476
126477
126478
126479
126480
126481
126482
126483
126484
126485
126486
126487
126488
126489
126495
126496
126497
126498
126499
126500
126502
126503
126504
126505
126510
126513
126516
126518
126519
126521
126522
126523
126524
126525
126526
126528
126531
126533
126534
126535
126536
126537
126538
126539
126540
126541
126544
126547
126548
126601
B7-20
B7-20
B7-20
B7-20
B6-16
B6-16
B6-16
B6-16
B6-16
B7-42
B7-42
B7-42
B7-42
B7-42
B6-56
B6-56
B6-56
B6-56
B6-56
B6-56
B6-56
B6-56
B6-56
B6-56
B4-92
B4-92
B4-92
B4-92
B4-92
B4-12
B4-12
B4-12
B4-12
B4-12
B4-14
B4-14
B4-34
B4-34, B4-42
B4-34
B4-36
B4-36
B4-36
B4-54
B4-54
B4-54
B4-54, B4-60
B4-56
B4-26
B4-26
B4-26
B4-42
B4-56, B4-60
B4-60
B4-60
B4-60
B4-60
B4-72
B4-14, B4-26
B4-14
B6-10
Page
INDEX-39
B2-64
B2-64
B2-64
B2-64
B2-64
B2-64
B2-59, B2-64
B2-59, B2-64
B2-59, B2-64
B2-56
B2-56
B2-56
B2-56
B2-56
B2-56
B2-56
B2-56
B2-56
B2-59
B2-59
B2-59
B2-59
B2-59
B2-59
B2-46
B2-46
B2-46
B2-46
B2-46
B2-46
B2-46
B2-51
B2-51
B2-51
B2-51
B2-64
B2-64
B2-64
B2-64
B2-64
B2-64
B2-64
B2-56
B2-56
B2-56
B2-56
B2-56
B2-56
B2-56
B2-59
B2-48
B2-48
B2-48
B2-48
B2-48
B2-48
B2-48
B2-48
B2-48
B2-52
Part Number
127588
127589
127590
127591
127592
127593
127594
127595
127596
127597
127598
127599
127600
127601
127602
127603
127604
127605
127606
127607
127608
127609
127610
127611
127612
127613
127614
127615
127616
127617
127618
127619
127620
127621
127622
127623
127624
127625
127626
127627
127628
127629
127630
127631
127632
127633
127634
127635
127636
127637
127638
127639
127640
127641
127642
127643
127644
127645
127646
127647
B2-52
B2-52
B2-52
B2-52
B2-52
B2-65
B2-65
B2-65
B2-65
B2-65
B2-65
B2-65
B2-65
B2-65
B2-57
B2-57
B2-57
B2-57
B2-57
B2-57
B2-57
B2-57
B2-57
B2-60
B2-60
B2-60
B2-60
B2-60
B2-60
B2-70
B2-70
B2-70
B2-70
B2-70
B2-70
B2-48
B2-48
B2-48
B2-48
B2-48
B2-48
B2-48
B2-52
B2-52
B2-52
B2-52
B2-65
B2-65
B2-65
B2-65
B2-65
B2-65
B2-65
B2-57
B2-57
B2-57
B2-57
B2-57
B2-57
B2-57
Page
Plummer Blocks
127515
127516
127517
127518
127519
127520
127521
127522
127523
127524
127525
127526
127527
127528
127529
127530
127531
127532
127533
127534
127535
127536
127537
127538
127545
127546
127547
127548
127549
127550
127551
127552
127553
127554
127555
127556
127557
127558
127559
127560
127561
127562
127563
127564
127565
127566
127567
127568
127569
127570
127578
127579
127580
127581
127582
127583
127584
127585
127586
127587
Page
Sleeve Bearings
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B4-24, B4-26
B4-26
B4-24, B4-26
B4-24, B4-26
B4-24, B4-26
B4-14, B4-24, B4-26
B4-24, B4-26
B4-14, B4-24, B4-26
B4-24, B4-26
B4-14, B4-26
B4-26
B4-26
B4-26
B4-26
B4-26
B4-28
B4-28
B4-28
B4-28
B4-28
B4-28
B4-28
B4-28
B4-28
B4-28
B4-18, B4-28
B4-26
B4-26
B4-26
B2-42
B2-46
B2-46
B2-46
B2-46
B2-46
B2-46
B2-46
B2-46
B2-46
B2-51
B2-51
B2-51
B2-51
B2-51
B2-51
Part Number
SLEEVOIL
126685
126686
126687
126688
126689
126690
126691
126692
126693
126694
126695
126696
126697
126698
126699
126810
126811
126812
126813
126814
126815
126816
126817
126818
126819
126820
126821
126822
126823
126824
126835
126836
126837
126838
126839
126840
126841
126842
126843
126844
126847
126855
126856
126857
127073
127500
127501
127502
127503
127504
127505
127506
127507
127508
127509
127510
127511
127512
127513
127514
Page
Take-Up Frames
B6-10
B6-10
B6-10
B6-10, B6-14
B6-10
B6-10
B6-10
B6-10
B6-10
B6-26
B6-26
B6-26
B6-26
B6-26
B6-26
B6-26
B6-26
B6-34
B6-34
B6-34
B6-34
B6-34
B6-34
B6-34
B6-34
B6-34
B6-34
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B6-54
B6-54
B6-54
B6-16, B6-18
B6-18
B6-30
B6-36
B6-36
B6-58
B6-58
B6-28
B6-28
B6-28
B6-28
B6-28
B6-28
B6-28
B6-38
B6-38
B6-38
B6-38
B6-38
B6-38
B6-38
B6-40
B6-38
Part Number
Engineering
126602
126603
126604
126605
126606
126607
126608
126609
126610
126611
126612
126613
126614
126615
126616
126617
126618
126619
126620
126621
126622
126623
126624
126625
126626
126627
126628
126629
126630
126631
126632
126633
126634
126635
126636
126637
126638
126639
126640
126641
126642
126643
126644
126645
126646
126647
126648
126649
126650
126651
126652
126653
126654
126655
126656
126657
126658
126659
126660
126661
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
127648
127649
127650
127651
127652
127653
127654
127655
127670
127671
127672
127673
127674
127675
127676
127677
127678
127679
127680
127681
127682
127683
127684
127685
127686
127687
127688
127689
127690
127691
127692
127693
127694
127695
127696
127697
127698
127699
127700
127701
127702
127703
127704
127705
127706
127707
127708
127709
127710
127711
127712
127713
127714
127715
127716
127717
127718
127719
127720
127721
B2-60
B2-60
B2-60
B2-60
B2-70
B2-70
B2-70
B2-70
B2-26
B2-26
B2-26
B2-26
B2-26
B2-26
B2-26
B2-26
B2-26
B2-26
B2-26
B2-31
B2-31
B2-31
B2-31
B2-31
B2-31
B2-31
B2-31
B2-36
B2-36
B2-36
B2-36
B2-36
B2-36
B2-36
B2-36
B2-26
B2-26
B2-26
B2-26
B2-26
B2-26
B2-31
B2-31
B2-31
B2-31
B2-31
B2-31
B2-36
B2-36
B2-36
B2-36
B2-36
B2-36
B2-28
B2-28
B2-28
B2-28
B2-28
B2-28
B2-28
Page
Part Number
127722
127723
127724
127725
127726
127727
127728
127729
127730
127731
127732
127733
127734
127735
127736
127737
127738
127739
127740
127741
127742
127743
127744
127745
127746
127747
127748
127749
127750
127751
127752
127753
127754
127755
127756
127804
127808
127818
127819
127820
127821
127822
127823
127824
127825
127826
127861
127862
127863
127864
127865
127866
127867
128082
128083
128084
128085
128086
128087
128088
B2-28
B2-32
B2-32
B2-32
B2-32
B2-32
B2-32
B2-32
B2-32
B2-37
B2-37
B2-37
B2-37
B2-37
B2-37
B2-37
B2-37
B2-28
B2-28
B2-28
B2-28
B2-28
B2-28
B2-32
B2-32
B2-32
B2-32
B2-32
B2-32
B2-37
B2-37
B2-37
B2-37
B2-37
B2-37
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B1-34
B4-53
B4-53
B4-53
B4-53
B4-53
B4-53
B4-64
Page
Part Number
128089
128090
128091
128092
128093
128094
128095
128096
128097
128106
128107
128108
128109
128110
128111
128130
128131
128132
128133
128134
128135
128136
128137
128138
128139
128140
128141
128142
128143
128144
128145
128146
128147
128148
128149
128150
128151
128154
128170
128171
128172
128173
128174
128175
128176
128177
128178
128179
128180
128181
128182
128183
128184
128185
128186
128187
128188
128189
128190
128191
INDEX-40
B4-64
B4-64
B4-64
B4-48
B4-48
B4-48
B4-48
B4-48
B4-48
B4-30
B4-30
B4-30
B4-30
B4-30
B4-30
B9-14
B9-14
B9-14
B9-14
B9-14
B9-14
B9-14
B9-19
B9-19
B9-19
B9-19
B9-19
B9-19
B9-19
B9-23
B9-23
B9-23
B9-23
B9-23
B9-23
B9-23
B4-48
B4-48
B4-30
B4-30
B4-30
B4-30
B4-48
B4-48
B4-48
B4-48
B4-53
B4-53
B4-53
B4-53
B4-64
B9-14
B9-14
B9-14
B9-19
B9-19
B9-19
B9-23
B9-23
B9-23
Page
Part Number
128192
128193
128194
128195
128196
128197
128200
128201
128202
128203
128204
128205
128206
128207
128208
128209
128210
128211
128212
128213
128214
128215
128216
128217
128218
128219
128220
128221
128222
128223
128277
128278
128280
128281
128282
Page
B9-26
B9-26
B9-26
B9-26
B9-26
B4-30
B4-106, B5-74, B6-66,
B7-48
B4-108, B5-76, B6-68,
B7-50
B4-106, B5-74, B6-66,
B7-48
B4-108, B5-76, B6-68,
B7-50
B4-106, B5-74, B6-66,
B7-48
B4-108, B5-76, B6-68,
B7-50
B4-106, B5-74, B6-66,
B7-48
B4-108, B5-76, B6-68,
B7-50
B4-106, B5-74, B6-66,
B7-48
B4-108, B5-76, B6-68,
B7-50
B4-106, B5-74, B6-66,
B7-48
B4-108, B5-76, B6-68,
B7-50
B4-106, B5-74, B6-66,
B7-48
B4-108, B5-76, B6-68,
B7-50
B4-106, B5-74, B6-66,
B7-48
B4-108, B5-76, B6-68,
B7-50
B4-106, B5-74, B6-66,
B7-48
B4-108, B5-76, B6-68,
B7-50
B4-106, B5-74, B6-66,
B7-48
B4-108, B5-76, B6-68,
B7-50
B6-70
B6-70
B6-70
B6-70
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
128350
128351
128352
128353
128354
128355
128356
128357
128358
128363
128364
128365
128366
128367
128368
128369
128380
128381
128382
128383
128384
128385
128386
128387
128388
128389
128390
128391
128432
128435
128436
128437
128438
128440
128441
128443
INDEX-41
B6-10
B6-10
B6-10, B6-16, B6-18
B6-10
B6-10
B6-10, B6-14
B6-10, B6-18
B6-10
B6-10
B6-10
B6-10
B6-10
B6-10
B6-10
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-14
B6-22
B6-22
B6-22
B6-22
B6-22
B6-22
B6-22
B6-22
B6-22
B6-22
B6-22
B6-22
B6-22
B6-22
B6-22
B6-26
B6-26
B6-26
B6-26
B6-26
B6-26
B6-26
B6-26, B6-30
B6-26
B6-26
B6-26
B6-26
Part Number
128769
128770
128771
128772
128774
128775
128776
128777
128778
128779
128780
128781
128782
128783
128784
128785
128786
128787
128788
128789
128790
128792
128794
128795
128796
128797
128798
128799
128800
128801
128802
128803
128804
128805
128806
128807
128808
128809
128810
128811
128812
128813
128814
128815
128816
128817
128818
128820
128822
128823
128824
128825
128826
128827
128828
128829
128830
128831
128832
128833
Page
B6-26
B6-26
B6-26
B6-26
B6-26
B6-34
B6-34
B6-34
B6-34
B6-34
B6-34
B6-34
B6-34, B6-36
B6-34
B6-34
B6-34
B6-34, B6-36
B6-34
B6-34
B6-34
B6-34
B6-34
B6-34
B6-34
B6-33
B6-33
B6-33
B6-33
B6-33
B6-33
B6-33
B6-33
B6-33
B6-33
B6-33
B6-33
B6-38
B6-38
B6-38, B6-40
B6-38
B6-38
B6-38, B6-40
B6-38, B6-40
B6-38
B6-38
B6-38
B6-38
B6-38
B6-38
B6-18
B6-16, B6-18
B6-16, B6-18
B6-18
B6-18
B6-18
B6-16, B6-18
B6-10, B6-16, B6-18
B6-16, B6-18
B6-10, B6-18
B6-16, B6-18
Plummer Blocks
128705
128706
128707
128708
128709
128710
128711
128712
128713
128714
128715
128717
128719
128720
128721
128722
128723
128724
128725
128726
128727
128728
128729
128730
128731
128732
128733
128734
128735
128736
128738
128739
128741
128742
128743
128744
128745
128746
128747
128748
128749
128750
128751
128752
128753
128754
128755
128756
128757
128758
128759
128760
128761
128762
128763
128764
128765
128766
128767
128768
Page
Sleeve Bearings
128286
B6-12
B6-12
B6-12
B6-12
B6-12
B6-20
B6-20
B6-20
B6-20
B6-20
B6-20
B6-20
B6-12, B6-20
B6-20
B6-12, B6-20
B6-20
B6-12, B6-20
B6-20
B6-20
B6-20
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54, B6-58
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54, B6-58
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B2-43, B6-54
B6-54, B6-58
B6-54
B6-54, B6-58
B6-58
B6-54
B6-54
B6-58
B6-58
B6-58
B6-58
B2-43, B6-58
B6-58
B6-58
B6-58
B6-58
B6-54, B6-58
B2-43, B6-54
B6-18
B6-18
B6-18
B6-10
B6-10
B6-10
B6-10
B6-10
Part Number
SLEEVOIL
128285
128444
128446
128449
128451
128452
128474
128475
128476
128477
128478
128479
128480
128481
128482
128483
128484
128485
128488
128489
128490
128646
128647
128648
128649
128650
128651
128652
128653
128654
128655
128656
128657
128658
128659
128660
128661
128663
128664
128665
128666
128667
128668
128669
128670
128671
128672
128673
128674
128675
128676
128677
128684
128696
128697
128698
128700
128701
128702
128703
128704
Page
Take-Up Frames
128284
B3-41, B4-103, B5-71,

B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B3-41, B4-103, B5-71,
B6-63, B7-45
B6-60
B6-60
B6-60
B6-60
B6-60
B6-60
B6-60
B6-60
B6-60
B6-60
B6-60
B6-60
B6-12
B6-12
B6-12
B6-12
B6-12
B6-12
B6-12
B6-12
Part Number
Engineering
128283
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
128834
128835
128836
128837
128838
128839
128840
128841
128842
128843
128844
128845
128846
128847
128848
128849
128850
128851
128852
128853
128854
128855
128856
128857
128858
128859
128860
128861
128862
128863
128864
128865
128866
128960
128961
128962
128963
128964
128965
128966
128974
128975
128976
128977
128978
128980
128989
128990
128991
128992
128993
128994
128996
128997
128998
129040
129041
129042
129043
129044
B6-10, B6-18
B6-30
B6-30
B6-30
B6-30
B6-30
B6-30
B6-30
B6-26, B6-30
B6-36
B6-36
B6-36
B6-36
B6-36
B6-36
B6-36
B6-34, B6-36
B6-36
B6-34, B6-36
B6-36
B6-34, B6-36
B6-40
B6-40
B6-40
B6-40
B6-40
B6-40
B6-40
B6-38, B6-40
B6-40
B6-38, B6-40
B6-40
B6-38, B6-40
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B1-35, B2-77
B4-32
B5-16
B5-16
B5-16
B5-16
B5-16
Page
Part Number
129045
129046
129047
129048
129049
129078
129148
129149
129150
129151
129152
129153
129154
129155
129156
129157
129158
129159
129160
129161
129162
129163
129164
129165
129166
129167
129168
129169
129170
129171
129172
129173
129174
129175
129176
129177
129178
129179
129180
129181
129182
129183
129184
129185
129186
129187
129188
129189
129190
129191
129192
129193
129194
129195
129196
129197
129198
129199
129200
129201
Page
B5-16
B5-16
B5-16
B5-20
B5-20, B7-20
B5-26, B5-30
B5-24
B5-10
B5-8, B5-16
B5-8, B5-16
B5-8
B5-8
B5-8
B5-8
B5-8
B5-8
B5-8
B5-8
B5-8
B5-8, B5-20, B7-20
B5-8
B5-8
B5-10
B5-10
B5-10
B5-10
B5-10
B5-10
B5-10
B5-10
B5-10
B5-10
B5-12
B5-12
B5-12
B5-12
B5-12
B5-14
B5-14
B5-14
B5-14
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
Part Number
129202
129203
129204
129205
129206
129207
129208
129209
129210
129211
129212
129213
129214
129215
129216
129217
129218
129219
129220
129221
129222
129223
129224
129225
129226
129227
129228
129229
129230
129231
129232
129233
129234
129235
129236
129237
129238
129239
129240
129241
129242
129243
129244
129245
129246
129247
129248
129249
129250
129251
129252
129253
129254
129255
129256
129257
129258
129259
129260
129261
INDEX-42
Page
B5-16
B5-8, B5-16
B5-8
B5-8
B5-8
B5-8
B5-8
B5-8
B5-16
B5-10
B5-10
B5-10
B5-10
B5-10
B5-10
B5-20
B5-20, B7-20
B5-20, B7-20
B5-20
B5-20, B7-20
B5-20, B7-20
B5-20, B7-20
B5-10, B5-20, B7-20
B5-20, B7-20
B5-10, B5-20
B5-20, B7-20
B5-10, B5-20
B5-20
B5-20
B5-20
B5-20
B5-20
B5-22
B5-22
B5-22
B5-22
B5-22
B5-22
B5-22
B5-22
B5-22
B5-22
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-24
B2-24
Part Number
129262
129263
129264
129265
129266
129267
129268
129269
129270
129271
129272
129273
129274
129275
129276
129277
129278
129279
129280
129281
129282
129283
129284
129285
129286
129287
129288
129289
129290
129291
129292
129293
129294
129295
129296
129297
129298
129299
129300
129301
129302
129303
129304
129305
129306
129307
129308
129309
129310
129311
129312
129313
129314
129315
129316
129317
129318
129319
129320
129321
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B2-50
B2-50
B2-50
B2-50
B2-50
B2-50
B2-50
B2-50
B2-50
B2-50
B5-26
B5-26
B5-26
B5-26
B5-26
B5-26
B5-26
B5-26
B5-26
B5-26, B5-30
B5-26
B5-26
B5-26
B5-26, B5-30
B5-26
B5-26
B5-26
B5-26
B5-26
B5-28
B5-26
Page
INDEX-43
B5-35, B5-42
B5-35, B5-42
B5-36, B5-42
B5-36, B5-42
B5-36, B5-42
B5-36, B5-42
B5-36, B5-42
B5-36, B5-42
B5-36, B5-42
B5-38, B5-44
B5-38, B5-44
B5-38, B5-44
B5-40, B5-44
B5-40, B5-44
B5-40, B5-44
B5-40, B5-44
B5-40, B5-44
B5-40, B5-44
B5-40, B5-44
B5-42
B5-42
B5-44
B5-44
B5-26
B5-26
B5-26, B5-30
B5-26, B5-30
B5-26, B5-30
B5-26, B5-30
B5-26, B5-30
B5-26, B5-30
B5-26, B5-30
B5-28
B5-28
B5-46, B5-48
B5-46, B5-48
B5-46, B5-48
B5-46, B5-48
B5-46, B5-48
B5-46, B5-48
B5-46, B5-48
B5-46, B5-48
B5-48
B5-48
B5-33
B5-33
B5-33
B5-33
B5-33
B5-62
B5-62
B5-62, B5-66
B5-62, B5-66
B5-62, B5-66
B5-64, B5-66
B5-64, B5-66
B5-64, B5-66
B5-64, B5-66
B5-64, B5-66
B5-64, B5-66
Part Number
129527
129528
129529
129530
129531
129532
129533
129534
129535
129536
129537
129538
129539
129540
129541
129542
129543
129544
129545
129546
129547
129548
129549
129550
129551
129552
129553
129554
129555
129556
129557
129558
129559
129560
129561
129562
129563
129564
129565
129566
129567
129568
129569
129570
129571
129572
129573
129574
129575
129576
129577
129578
129579
129580
129581
129582
129583
129584
129585
129602
B5-64, B5-66
B5-66
B5-66
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-44
B2-50
B2-50
B2-50
B2-50
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-58
B2-58
B2-58
B2-58
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B2-24
B2-35
B2-35
B2-35
B2-35
B2-35
B2-35
B2-30
B2-30
B2-30
B2-30
B2-30
B2-30
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-24, B2-44
Page
Plummer Blocks
129467
129468
129469
129470
129471
129472
129473
129474
129475
129476
129477
129478
129479
129480
129481
129482
129483
129484
129485
129486
129487
129488
129489
129490
129491
129492
129493
129494
129495
129496
129497
129498
129499
129500
129501
129502
129503
129504
129505
129506
129507
129508
129509
129510
129511
129512
129513
129514
129515
129516
129517
129518
129519
129520
129521
129522
129523
129524
129525
129526
Page
Sleeve Bearings
B5-22
B5-20
B5-22
B5-20
B5-22
B2-44
B2-44
B2-54
B2-62
B2-44
B5-12
B5-66
B5-8, B5-20
B5-8, B5-16
B5-8
B5-8, B5-20
B5-8
B5-8, B5-20
B5-10, B5-20
B5-10, B5-20
B5-10, B5-20
B5-10, B5-20
B5-10, B5-20
B5-10, B5-20
B5-10, B5-20
B5-8
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-16
B5-12
B5-12, B5-22
B5-12, B5-22
B5-14, B5-22
B5-14, B5-22
B5-14, B5-22
B5-14, B5-22
B5-14, B5-22
B5-14, B5-22
B5-22
B5-12, B5-22
B5-20
B5-20
B5-22
B5-22
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-35
B5-35
B5-35, B5-42
Part Number
SLEEVOIL
129384
129385
129386
129387
129388
129392
129393
129394
129395
129396
129399
129417
129419
129420
129421
129422
129423
129424
129425
129426
129427
129428
129429
129430
129431
129432
129433
129434
129435
129436
129437
129438
129439
129440
129441
129442
129443
129444
129445
129446
129447
129448
129449
129450
129451
129452
129453
129454
129455
129456
129457
129458
129459
129460
129461
129462
129463
129464
129465
129466
Page
Take-Up Frames
B5-26
B5-26
B5-26
B5-26
B5-26
B5-26
B5-26
B5-26
B5-30
B5-30
B5-30
B5-30
B5-30
B5-30
B5-30
B5-26, B5-30
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-54
B2-30
B2-30
B2-30
B2-30
B2-30
B2-30
B2-30
B2-30
B2-30
B2-30
B2-30
B2-30
B2-30
B2-30
B5-30
B5-10
B5-16
B5-26
B5-36
B5-46
B5-10
B5-16
B5-26
B5-36
B5-46
B5-20
B5-22
B5-20
Part Number
Engineering
129322
129323
129324
129325
129326
129327
129328
129329
129330
129331
129332
129333
129334
129335
129336
129337
129339
129340
129341
129342
129343
129344
129345
129346
129347
129348
129349
129350
129351
129352
129353
129354
129355
129356
129357
129358
129359
129360
129361
129362
129363
129364
129365
129366
129367
129368
129369
129371
129372
129373
129374
129375
129376
129377
129378
129379
129380
129381
129382
129383
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
129603
129605
129606
129611
129612
129613
129615
129616
129617
129618
129619
129620
129621
129622
129623
129624
129625
129626
129627
129629
129631
129632
129634
129635
129637
129638
129639
129640
129641
129642
129643
129644
129645
129646
129647
129648
129649
129650
129651
129652
129653
129654
129655
129656
129657
129658
129659
129660
129661
129662
129663
129664
129665
129666
129667
129668
129669
129670
129671
129672
B2-44
B2-24
B2-24, B2-44
B2-44
B2-24
B2-24, B2-44
B5-33
B5-33
B5-33
B5-33
B5-33
B5-33
B5-33
B5-33
B5-33
B5-33
B5-33
B5-33
B2-58
B2-58
B2-58
B2-58
B2-58
B2-58
B5-35
B5-35
B5-35
B5-35
B5-35
B5-35
B5-35
B5-35
B5-35
B5-35, B5-42
B5-35
B5-35
B5-36
B5-36
B5-36
B5-36
B5-36
B5-36
B5-36
B5-36
B5-36
B5-36
B5-38
B5-38
B5-38
B5-40
B5-40
B5-40
B5-40
B5-40
B5-35
B5-35
B5-35
B5-35
B5-35
B5-36
Page
Part Number
129673
129674
129675
129676
129677
129678
129679
129680
129681
129682
129683
129684
129685
129686
129687
129688
129689
129690
129691
129692
129693
129694
129695
129696
129697
129698
129699
129700
129701
129702
129703
129704
129705
129706
129707
129708
129709
129710
129711
129712
129713
129714
129715
129716
129717
129718
129719
129720
129721
129722
129723
129724
129725
129726
129727
129728
129729
129730
129731
129732
B5-36
B5-36
B5-36
B5-36
B5-36
B5-36
B5-42
B5-42
B5-42
B5-42
B5-42
B5-42
B5-42
B5-42
B5-36, B5-42
B5-42
B5-36, B5-42
B5-42
B5-36, B5-42
B5-42
B5-42
B5-42
B5-42
B5-42
B5-44
B5-44
B5-44
B5-44
B5-44
B5-44
B5-44
B5-44
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-62
B2-35
B2-35
B2-35
B2-35
B2-35
B2-35
B2-35
B2-35
B2-35
B2-35
B2-35
B2-35
Page
Part Number
129733
129734
129735
129736
129737
129738
129739
129740
129741
129742
129743
129744
129745
129746
129747
129748
129749
129750
129751
129752
129753
129754
129755
129756
129757
129758
129759
129760
129761
129762
129763
129764
129765
129766
129767
129768
129769
129770
129771
129772
129773
129774
129775
129776
129777
129778
129779
129780
129781
129782
129783
129784
129785
129786
129787
129788
129789
129790
129791
129792
INDEX-44
B2-35
B2-35
B5-46
B5-46
B5-46
B5-46, B5-48
B5-46
B5-46
B5-46, B5-48
B5-46, B5-48
B5-46
B5-46
B5-46
B5-46
B5-46
B5-46
B5-46
B5-46
B5-46
B5-46
B5-46
B5-46
B5-46
B5-46
B5-46
B5-48
B5-48
B5-48
B5-48
B5-48
B5-48
B5-48
B5-46, B5-48
B5-48
B5-46, B5-48
B5-48
B5-46, B5-48
B5-48
B5-48
B5-48
B5-48
B5-62
B5-62
B5-62
B5-62
B5-62
B5-62
B5-62
B5-62
B5-62
B5-62, B5-66
B5-62
B5-62
B5-64
B5-64, B5-66
B5-64
B5-64
B5-64
B5-64
B5-64
Page
Part Number
129793
129794
129795
129796
129797
129798
129799
129800
129801
129802
129803
129804
129805
129806
129807
129808
129809
129810
129811
129812
129813
129814
129815
129816
129817
129818
129819
129820
129821
129822
129823
129824
129825
129826
129827
129828
129829
129830
129831
129832
129833
129834
129835
129836
129837
129838
129839
129840
129841
129842
129843
129844
129845
129889
129890
129891
129892
129893
129894
129895
B5-64
B5-64
B5-64
B5-62
B5-62
B5-62
B5-62
B5-62
B5-64
B5-64
B5-64
B5-64
B5-64
B5-64
B5-64
B5-66
B5-66
B5-66
B5-66
B5-66
B5-66
B5-66
B5-64, B5-66
B5-66
B5-64, B5-66
B5-66
B5-64, B5-66
B5-66
B5-66
B5-66
B5-66
B5-66
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B2-40
B5-8
B5-8
B5-8
B5-64
B5-64
B5-66
B5-66
B5-66
B5-66
B5-66
B5-66
B5-66
Page
129970
129971
129972
129973
129974
129975
129976
129977
129978
129979
129980
129981
129982
129983
129984
129988
129989
129990
129991
130044
130045
130047
130049
130050
130051
130054
130056
130057
130058
130059
130060
130062
130063
130064
130065
130066
130067
130068
130069
130070
130071
130073
130078
130276
130300
130301
130302
130303
130305
130306
130307
130308
130310
130311
130312
130313
130314
130315
130316
130317
130318
130319
130320
130321
130322
130323
130324
130325
130326
INDEX-45
B9-16
B9-16
B9-16
B9-16
B9-16
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-30
B9-30
B9-30
B9-30
B9-30
B9-30
B9-32
B9-32
B9-32
B9-32
B9-32
B9-32
B9-16
B9-16
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B4-32
B4-46
B4-46
B4-46
B4-46
B4-46
B4-40
B4-40
B4-40
B4-40
B4-40
B4-40
B4-40
B5-18
B5-18
B5-18
B5-18
B5-18
B5-18
B5-18
B5-18
B5-18
B5-18
B5-18
B5-18
B5-18
Part Number
130769
130770
130771
130772
130773
130774
130775
130776
130777
130778
130779
130780
130781
130782
130783
130784
130785
130786
130787
130788
130789
130790
130791
130792
130793
130794
130795
130796
130797
130798
130799
130831
130832
130833
130834
130835
130836
130837
130838
130839
130840
130841
130842
130843
130845
130846
130847
130848
130849
130850
130851
130852
130853
130854
130880
131050
131052
131054
131056
131057
B9-12
B9-12
B9-12
B9-12
B9-12
B9-12
B9-12
B9-18
B9-18
B9-18
B9-18
B9-18
B9-20
B9-20
B9-20
B9-20
B9-20
B9-20
B9-20
B9-28
B9-28
B9-28
B9-28
B9-28
B9-32
B9-32
B9-32
B9-32
B9-32
B9-32
B9-32
B7-26
B7-26
B7-26
B7-26
B7-26
B7-26
B7-26
B7-30
B7-30
B7-30
B7-30
B7-30
B7-30
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
Page
Plummer Blocks
130327
130328
130329
130330
130331
130332
130333
130334
130335
130336
130337
130338
130339
130340
130341
130342
130343
130344
130345
130346
130347
130348
130349
130350
130351
130352
130353
130354
130355
130356
130357
130358
130359
130360
130361
130362
130363
130364
130365
130366
130367
130368
130369
130370
130371
130372
130373
130689
130691
130692
130693
130694
130695
130696
130697
130698
130699
130700
130701
130702
Page
Sleeve Bearings
129986
B2-40, B2-54, B2-62

B2-40, B2-44, B2-54,
B2-62
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-54,
B2-62
B2-50
B2-50
B2-50
B2-50
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B9-6
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-6, B9-10
B9-6, B9-10
B9-8
B9-8
B9-8
B9-8
B9-8
B9-8
B9-10
B9-10
B9-10
B9-10
B9-10
B9-10
B9-6
B9-6
B9-16
Part Number
SLEEVOIL
129969
129985
Page
Take-Up Frames
129968
B5-66
B5-66
B5-66
B5-66
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-50,
B2-54, B2-58, B2-62,
B2-66
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-50,
B2-54, B2-58, B2-62,
B2-66
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-50,
B2-54, B2-58, B2-62,
B2-66
B2-24, B2-30, B2-35,
B2-40, B2-50, B2-54,
B2-58, B2-62, B2-66
B2-24, B2-30, B2-35,
B2-40, B2-50, B2-54,
B2-58, B2-62, B2-66
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-50,
B2-54, B2-58, B2-62,
B2-66
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-50,
B2-54, B2-58, B2-62,
B2-66
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-50,
B2-54, B2-58, B2-62,
B2-66
B2-24, B2-30, B2-35,
B2-40, B2-54, B2-62
B2-40, B2-44, B2-54,
B2-62
B2-40, B2-44, B2-54,
B2-62
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-54,
B2-62
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-54,
B2-62
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-50,
B2-54, B2-62, B2-66
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-50,
B2-54, B2-62, B2-66
B2-24, B2-30, B2-35,
B2-40, B2-50, B2-54,
B2-62, B2-66
B2-24, B2-30, B2-35,
B2-40, B2-44, B2-50,
B2-54, B2-62, B2-66
B2-24, B2-30, B2-35,
Part Number
Engineering
129896
129897
129898
129899
129967
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
131058
131059
131060
131061
131063
131064
131065
131066
131067
131070
131071
131072
131074
131075
131077
131079
131082
131083
131084
131085
131100
131102
131104
131106
131107
131108
131109
131110
131111
131113
131114
131115
131116
131117
131120
131121
131122
131125
131127
131130
131132
131135
131137
131154
131156
131157
131158
131159
131160
131161
131163
131164
131165
131166
131167
131170
131171
131172
131175
131177
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B7-24
B9-6
B9-6
B9-6
B9-6
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-28
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
B7-32
Page
Part Number
131180
131182
131185
131186
131187
131188
131189
131190
131191
131192
131193
131194
131195
131196
131197
131198
131204
131206
131207
131208
131209
131210
131211
131213
131214
131215
131216
131217
131220
131221
131222
131225
131227
131230
131232
131235
131238
131239
131240
131241
131243
131244
131245
131246
131248
131249
131250
131259
131260
131261
131263
131264
131265
131266
131275
131276
131317
131325
131327
131335
B7-32
B7-32
B7-32
B9-30
B9-30
B9-30
B9-30
B9-30
B9-30
B9-30
B9-30
B9-30
B9-30
B9-30
B9-30
B9-30
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B7-34
B9-32
B9-32
B9-32
B9-32
B9-32
B9-32
B9-32
B9-32
B9-32
B9-32
B9-32
B7-37
B7-37
B7-37
B7-37
B7-37
B7-37
B7-37
B7-37
B7-37
B7-38
B7-38
B7-38
B7-38
Page
Part Number
131339
131340
131341
131342
131343
131356
131357
131358
131359
131360
131361
131363
131364
131365
131366
131377
131378
131379
131380
131381
131382
131383
131384
131385
131386
131387
131388
131389
131432
131433
131434
131435
131436
131437
131438
131439
131440
131441
131442
131443
131444
131445
131446
131447
131536
131537
131540
131542
131545
131589
131737
131738
131739
131740
131741
131742
131743
131744
131745
131746
INDEX-46
B7-14
B7-18
B7-12
B7-12
B7-28
B7-39
B7-39
B7-39
B7-39
B7-39
B7-39
B7-39
B7-39
B7-39
B7-39
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B9-24
B7-14
B7-14
B7-18
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B9-34
B7-36
B7-36
B7-36
B7-36
B7-36
B9-6
B9-16
B9-16
B9-16
B9-16
B9-16
B9-16
B9-16
B9-16
B9-16
B9-16
Page
Part Number
131747
131748
131749
131800
131801
131802
131803
131804
131805
131806
131807
131808
131809
131810
131811
131812
131813
131814
131815
131816
131817
131818
131819
131820
131821
131830
131831
131832
131833
131834
131835
131836
131837
131838
131839
131840
131841
131842
131843
131844
131845
131846
131847
131848
131849
131895
131896
131897
131900
131902
131904
131906
131907
131908
131909
131910
131911
131912
131913
131914
B9-16
B9-16
B9-16
B7-12, B7-16
B7-12, B7-16
B7-12
B7-12
B7-12
B7-12
B7-12
B7-12
B7-12
B7-12
B7-12
B7-12
B7-12
B7-14
B7-14
B7-14
B7-14
B7-14
B7-14
B7-14
B7-14
B7-14
B7-16
B7-16
B7-16
B7-16
B7-16
B7-16
B7-16
B7-16
B7-16
B7-16
B7-16
B7-18
B7-18
B7-18
B7-18
B7-18
B7-18
B7-18
B7-18
B7-18
B7-12
B7-12
B7-12
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
Page
132547
132548
132549
132559
132564
132565
132566
132567
132591
132594
132597
132766
132767
132768
132811
132814
132816
132819
132822
132834
132924
132925
132926
132950
132951
132952
132953
132954
132955
133933
133937
133938
133959
133960
INDEX-47
B18-12
B18-12
B18-12
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-17
B18-17
B18-17
B18-10, B18-25
B18-15
B18-15
B18-17
B18-17
B18-10
B18-10
B18-10
B18-10
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-15
B18-13, B18-18,
B18-23
B18-13, B18-18,
B18-23
B18-13, B18-18,
B18-23
B18-13, B18-18,
B18-23
B18-15
B18-15
Part Number
133961
133980
133981
133982
133983
133984
133985
133986
133987
133988
133989
133990
133991
133992
133993
133994
133995
133996
133997
134186
134187
134188
134189
134190
134191
134192
134193
134194
134195
134196
134197
134200
134201
134202
134203
134204
134205
134206
134207
134208
134209
134210
134211
134212
134213
134516
134517
134518
134519
134520
134521
134716
134717
134718
134719
134720
134721
134779
134796
134798
Page
B18-15
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-10
B18-13
B18-13
B18-13
B18-13
B18-13
B18-13
B18-13
B18-15, B18-17
B18-15, B18-17
B18-15, B18-17
B6-24
B6-24
B6-24
B6-24
B6-24
B6-24
B6-24
B6-24
B6-24
B6-24
B6-24
B6-24
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-12
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-28
B18-28
Plummer Blocks
132956
132957
132958
132959
132983
132984
132985
132986
132987
132988
132989
132990
132991
132992
133203
133245
133250
133255
133260
133265
133270
133275
133280
133285
133292
133293
133294
133295
133296
133297
133303
133304
133305
133344
133392
133550
133565
133566
133583
133584
133585
133586
133590
133591
133592
133593
133594
133595
133596
133669
133932
Page
Sleeve Bearings
B18-18
B18-18
B18-19
B18-19
B18-19
B18-19
B18-19
B18-19
B18-19
B18-19
B18-19
B18-19
B18-19
B18-18
B18-18
B18-18
B18-18
B18-17
B18-17
B18-18, B18-22
B18-13, B18-18,
B18-22
B18-13, B18-18,
B18-22
B18-13, B18-18,
B18-22
B18-13, B18-18,
B18-22
B18-17
B18-15, B18-17,
B18-18, B18-22
B18-15, B18-17,
B18-18, B18-22
B18-15, B18-17,
B18-18, B18-22
B18-15, B18-22
B18-17
B18-17
B18-17
B18-15
B18-15
B18-15
B18-18, B18-23
B18-15, B18-17,
B18-18, B18-23
B18-15, B18-17,
B18-18, B18-23
B18-15, B18-17,
B18-18, B18-23
B18-15, B18-23
B18-26
B18-15
B18-15
B18-15
B18-10
B18-10
B18-12
B18-12
B18-12
B18-12
Part Number
SLEEVOIL
132388
132389
132420
132421
132422
132423
132424
132425
132426
132427
132428
132429
132430
132474
132475
132476
132477
132538
132539
132542
132546
Page
Take-Up Frames
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B7-40
B9-6
B9-6
B9-6
B9-6
B9-6
B9-6
B9-6
B9-6
B9-6
B9-6
B9-6
B9-6
B9-8
B9-10
B9-10
B9-10
B9-10
B9-10
B9-10
B9-10
B9-10
B9-10
B9-10
B9-10
B9-10
B9-10
B9-6
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B18-13, B18-25
B18-13, B18-25
B18-13, B18-25
B18-19
B18-19
B18-18
B18-18, B18-26
B18-18
B18-18
B18-18
Part Number
Engineering
131915
131916
131918
131919
131920
131923
131924
131927
131928
131931
131933
131934
131970
131971
131972
131973
131974
131975
131976
131977
131978
131979
131980
131981
131982
131983
131984
131985
131986
131987
131988
131989
131990
131991
131992
131993
131994
131995
131996
132151
132152
132153
132154
132155
132156
132157
132158
132159
132160
132161
132192
132193
132198
132203
132205
132383
132384
132385
132386
132387
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
134800
134803
134806
134809
134869
134870
134871
134872
134873
134874
134875
134876
134877
134886
134887
134888
134889
134890
134891
135081
135102
135105
135106
135107
135109
135111
135116
135117
135118
135120
135121
135123
135125
135127
135129
135130
135135
135136
135137
135138
135170
135171
135172
135181
135182
135183
135184
135185
135290
135291
135292
135293
135294
135295
135296
135297
135298
135299
135700
135704
B18-28
B18-28
B18-28
B18-28
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B18-21
B4-73
B4-73
B4-73
B4-73
B4-73
B4-73
B4-73
B4-78
B4-78
B4-78
B4-78
B4-78
B4-80
B4-80
B4-80
B4-80
B4-80
B18-27
B18-27
B18-27
B18-27
B4-73
B4-72, B4-73
B4-72, B4-73
B4-80
B4-78
B4-76, B4-80
B4-76, B4-80
B4-76, B4-80
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
Page
Part Number
135708
135712
135716
135720
135724
135728
135732
135736
136070
136071
136072
136073
136074
136075
136076
136080
136081
136082
136083
136084
136085
136110
136111
136112
136113
136114
136115
136116
136117
136118
136119
136120
136122
136123
136124
136125
136126
136127
136128
136129
136130
136131
136132
136133
136134
136135
136136
136137
136138
136139
136140
136141
136142
136143
136144
136145
136146
136147
136148
136149
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B18-27
B4-83
B4-83
B4-83
B4-83
B4-83
B4-83
B4-83
B4-83
B4-82, B4-83
B4-82, B4-83
B4-82, B4-83
B4-83
B4-83
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50, B5-52
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-54
B5-54
B5-54
B5-54
B5-54
B5-54
B5-54
B5-54, B5-58
B5-54
B5-54
B5-54
B5-54
B5-56
B5-56
B5-56
B5-56
B5-56
B5-56
B5-56
B5-56
Page
Part Number
136150
136151
136152
136153
136154
136155
136156
136157
136158
136159
136160
136161
136162
136163
136164
136165
136166
136167
136168
136169
136170
136171
136172
136173
136174
136175
136176
136177
136178
136179
136180
136181
136182
136183
136184
136185
136186
136187
136188
136189
136190
136191
136192
136193
136194
136195
136196
136197
136198
136210
136211
136212
136213
136214
136215
136216
136217
136218
136219
136220
INDEX-48
B5-56
B5-56
B5-60
B5-60
B5-60
B5-60
B5-60
B5-60
B5-60
B5-52
B5-52
B5-52
B5-52
B5-52
B5-52
B5-52
B5-52
B5-50, B5-52
B5-52
B5-50, B5-52
B5-58
B5-58
B5-58
B5-58
B5-58
B5-58
B5-58
B5-58
B5-56, B5-58
B5-58
B5-56, B5-58
B5-58
B5-56, B5-58
B5-58
B5-58
B5-58
B5-61
B5-61
B5-61
B5-60, B5-61
B5-61
B5-60, B5-61
B5-61
B5-60, B5-61
B5-61
B5-61
B5-61
B5-61
B5-61
B5-50
B5-50, B5-52
B5-50, B5-52
B5-50, B5-52
B5-50, B5-52
B5-50, B5-52
B5-50, B5-52
B5-50, B5-52
B5-50, B5-52
B5-54
B5-54, B5-58
Page
Part Number
136221
136222
136223
136224
136225
136226
136227
136228
136229
136230
136231
136232
136233
136234
136235
136236
136237
136238
136239
136240
136241
136242
136243
136244
136245
136246
136247
136248
136249
136250
136251
136252
136253
136254
136255
136257
136258
136259
136260
136261
136262
136263
136264
136265
136266
136267
136268
136269
136270
136271
136272
136273
136274
136275
136276
136277
136278
136279
136280
136281
B5-54, B5-58
B5-54, B5-58
B5-54, B5-58
B5-56, B5-58
B5-56, B5-58
B5-56, B5-58
B5-56, B5-58
B5-56, B5-58
B5-56, B5-58
B5-58
B5-60, B5-61
B5-60, B5-61
B5-60, B5-61
B5-60, B5-61
B5-60, B5-61
B5-61
B5-61
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-50
B5-54
B5-54
B5-54
B5-54
B5-54
B5-56
B5-56
B5-56
B5-56
B5-56
B5-20
B5-20, B7-20
B5-20
B5-20, B7-20
B5-20, B7-20
B5-20, B7-20
B5-20
B5-20
B5-20
B5-20
B5-30
B5-30
B5-30
B5-30
B5-30
B5-30
B5-30
B5-42
B5-42
B5-42
B5-42
B5-42
B5-42
B5-42
Page
B5-8, B5-12, B5-16,

B5-24, B5-26,
B5-28, B5-32, B5-33,
B5-34, B5-35, B5-38,
B5-46, B5-50, B5-54,
B5-62, B5-68
136526 B5-8, B5-12, B5-16,
B5-18, B5-24, B5-26,
B5-28, B5-32, B5-33,
B5-34, B5-35, B5-38,
B5-46, B5-50, B5-54,
B5-62, B5-68
136527 B5-8, B5-12, B5-16,
B5-18, B5-24, B5-26,
B5-28, B5-32, B5-33,
B5-34, B5-35, B5-38,
B5-46, B5-50, B5-54,
B5-62, B5-68
136528 B5-8, B5-12, B5-16,
B5-20, B5-22, B5-24,
B5-26, B5-28, B5-30,
B5-32, B5-33, B5-34,
B5-35, B5-38, B5-42,
B5-44, B5-46, B5-48,
B5-50, B5-52, B5-54,
B5-58, B5-62, B5-66,
B5-68
136529 B5-8, B5-12, B5-16,
B5-18, B5-24, B5-26,
B5-28, B5-32, B5-33,
B5-34, B5-35, B5-38,
B5-46, B5-50, B5-54,
B5-62, B5-68
136530 B5-10, B5-14, B5-16,
B5-24, B5-26, B5-28,
B5-36, B5-40, B5-46,
B5-48, B5-50, B5-54,
B5-64, B5-66, B5-68
136531 B5-10, B5-14, B5-16,
B5-24, B5-26, B5-28,
B5-30, B5-36, B5-40,
B5-46, B5-48, B5-50,
B5-56, B5-64, B5-66,
B5-68
136532 B5-10, B5-14, B5-16,
B5-18, B5-24, B5-26,
B5-28, B5-36, B5-40,
B5-46, B5-50, B5-56,
B5-64, B5-68
136533 B5-10, B5-14, B5-16,
B5-18, B5-24, B5-26,
B5-28, B5-36, B5-40,
B5-46, B5-50, B5-56,
B5-64, B5-68
136534 B5-10, B5-14, B5-16,
B5-18, B5-24, B5-26,
B5-28, B5-33, B5-36,
B5-40, B5-46, B5-50,
B5-56, B5-60, B5-64,
B5-68
INDEX-49
Part Number
136535
136536
136537
136538
136539
136540
136541
136542
136543
136544
136545
136546
136547
136548
Page
B5-10, B5-14, B5-16,

B5-18, B5-24, B5-26,
B5-28, B5-33, B5-36,
B5-40, B5-46, B5-50,
B5-56, B5-60, B5-64,
B5-68
B5-10, B5-14, B5-16,
B5-18, B5-26, B5-28,
B5-36, B5-40, B5-46,
B5-50, B5-56, B5-60,
B5-64, B5-68
B5-10, B5-14, B5-16,
B5-18, B5-26, B5-28,
B5-36, B5-40, B5-46,
B5-50, B5-56, B5-60,
B5-64, B5-68
B5-10, B5-14, B5-16,
B5-18, B5-26, B5-28,
B5-36, B5-40, B5-46,
B5-50, B5-56, B5-60,
B5-64, B5-68
B5-46, B5-56, B5-64,
B5-68
B5-10, B5-14, B5-16,
B5-36, B5-40, B5-56,
B5-64, B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-66,
B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-66,
B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-66,
B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-61,
B5-66, B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-61,
B5-66, B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-61,
B5-66, B5-68
B5-14, B5-20, B5-22,
B5-36, B5-40, B5-42,
B5-44, B5-48, B5-58,
B5-61, B5-66, B5-68
B5-10, B5-14, B5-20,
B5-22, B5-36, B5-40,
B5-42, B5-44, B5-46,
B5-48, B5-56, B5-58,
B5-60, B5-61, B5-64,
B5-66, B5-68
Plummer Blocks
136525
Page
Sleeve Bearings
B5-34
B5-34
B5-34
B5-34
B5-34
B5-34
B5-34
B5-34
B5-34
B5-34
B5-32
B5-32
B5-32
B5-32
B5-32
B5-34
B5-34
B5-34
B5-34
B5-34
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-24
B5-8, B5-12, B5-16,
B5-26, B5-28,
B5-32, B5-34,
B5-35, B5-38,
B5-62, B5-68
136522 B5-8, B5-12, B5-16,
B5-24, B5-26,
B5-28, B5-32,
B5-33, B5-34,
B5-35, B5-38,
B5-50, B5-54,
B5-62, B5-68
136523 B5-8, B5-12, B5-16,
B5-24, B5-26,
B5-28, B5-32,
B5-33, B5-34,
B5-35, B5-38,
B5-50, B5-54,
B5-62, B5-68
136524 B5-8, B5-16, B5-18,
B5-24, B5-26,
B5-28, B5-32,
B5-33, B5-34,
B5-35, B5-38,
B5-50, B5-54,
B5-62, B5-68
Part Number
SLEEVOIL
136345
136346
136347
136348
136349
136350
136351
136352
136353
136354
136355
136356
136357
136358
136359
136360
136361
136362
136363
136364
136365
136366
136367
136368
136369
136370
136371
136383
136384
136385
136386
136387
136388
136389
136521
Page
Take-Up Frames
B5-42
B5-42
B5-42
B5-42
B5-48
B5-48
B5-48
B5-48
B5-48
B5-48
B5-48
B5-48
B5-48
B5-52
B5-52
B5-52
B5-52
B5-52
B5-52
B5-52
B5-58
B5-58
B5-58
B5-58
B5-58
B5-58
B5-58
B5-58
B5-58
B5-58
B2-66
B2-66
B2-66
B2-66
B2-66
B2-66
B2-66
B2-66
B2-66
B2-66
B2-66
B2-66
B2-66
B2-66
B2-66
B2-66
B5-32
B5-32
B5-32
B5-32
B5-32
B5-32
B5-32
B5-32
B5-32
B5-32
B5-32
B5-32
B5-34
B5-34
Part Number
Engineering
136282
136283
136284
136285
136286
136287
136288
136289
136290
136291
136293
136294
136295
136296
136297
136298
136299
136300
136301
136302
136303
136304
136305
136306
136307
136308
136309
136310
136311
136312
136315
136316
136317
136318
136319
136320
136321
136322
136323
136324
136325
136326
136327
136328
136329
136330
136331
136332
136333
136334
136335
136336
136337
136338
136339
136340
136341
136342
136343
136344
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
136549
136550
Sleeve Bearings
136551
136552
136553
SLEEVOIL
136554
136555
Take-Up Frames
136556
136557
Engineering
136558
Part Number Index
136559
136560
136561
Keyword Index
136562
Page
B5-20, B5-22, B5-42,

B5-44, B5-58, B5-61,
B5-66, B5-68
B5-20, B5-22, B5-42,
B5-44, B5-48, B5-58,
B5-61, B5-66, B5-68
B5-20, B5-22, B5-42,
B5-44, B5-48, B5-58,
B5-61, B5-66, B5-68
B5-20, B5-22, B5-42,
B5-44, B5-48, B5-61,
B5-66, B5-68
B5-8, B5-12, B5-16,
B5-24, B5-26, B5-28,
B5-32, B5-34, B5-35,
B5-38, B5-50, B5-54,
B5-62, B5-68
B5-8, B5-12, B5-16,
B5-18, B5-24, B5-26,
B5-28, B5-32, B5-34,
B5-35, B5-38, B5-50,
B5-54, B5-62, B5-68
B5-8, B5-12, B5-16,
B5-18, B5-24, B5-26,
B5-28, B5-32, B5-34,
B5-35, B5-38, B5-46,
B5-50, B5-54, B5-62,
B5-68
B5-8, B5-12, B5-16,
B5-18, B5-24, B5-26,
B5-28, B5-32, B5-34,
B5-35, B5-38, B5-46,
B5-50, B5-54, B5-62,
B5-68
B5-10, B5-14, B5-16,
B5-18, B5-26, B5-28,
B5-36, B5-40, B5-46,
B5-50, B5-56, B5-64,
B5-68
B5-10, B5-14, B5-16,
B5-18, B5-24, B5-26,
B5-28, B5-36, B5-40,
B5-46, B5-50, B5-56,
B5-60, B5-64, B5-68
B5-10, B5-14, B5-16,
B5-18, B5-26, B5-28,
B5-36, B5-40, B5-46,
B5-50, B5-56, B5-60,
B5-64, B5-68
B5-46, B5-56, B5-60,
B5-64, B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-66,
B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-66,
B5-68
Part Number
136563
136564
136565
136566
136567
136568
136569
136570
136571
136574
136588
136589
136590
136591
136592
Page
B5-20, B5-22, B5-30,

B5-42, B5-44, B5-48,
B5-52, B5-58, B5-66,
B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-66,
B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-66,
B5-68
B5-22, B5-30, B5-42,
B5-44, B5-48, B5-52,
B5-58, B5-66, B5-68
B5-10, B5-14, B5-20,
B5-22, B5-36, B5-40,
B5-42, B5-44, B5-48,
B5-58, B5-66, B5-68
B5-20, B5-22, B5-42,
B5-44, B5-58, B5-66,
B5-68
B5-20, B5-22, B5-42,
B5-44, B5-48, B5-58,
B5-66, B5-68
B5-20, B5-22, B5-42,
B5-44, B5-48, B5-66,
B5-68
B5-12
B5-8, B5-12, B5-16,
B5-26, B5-28, B5-32,
B5-34, B5-35, B5-38,
B5-62, B5-68
B5-8, B5-12, B5-16,
B5-26, B5-28, B5-32,
B5-34, B5-35, B5-38,
B5-62, B5-68
B5-8, B5-12, B5-16,
B5-24, B5-26, B5-28,
B5-32, B5-33, B5-34,
B5-35, B5-38, B5-50,
B5-54, B5-62, B5-68
B5-8, B5-12, B5-16,
B5-24, B5-26, B5-28,
B5-32, B5-33, B5-34,
B5-35, B5-38, B5-46,
B5-50, B5-54, B5-62,
B5-68
B5-10, B5-14, B5-16,
B5-24, B5-26, B5-28,
B5-36, B5-40, B5-46,
B5-50, B5-54, B5-64,
B5-68
Part Number
136593
136594
136595
136596
136597
136598
136599
136600
136601
136602
136603
136657
136695
136696
136697
136698
136699
136700
136701
136702
136703
136704
136705
136706
INDEX-50
Page
B5-10, B5-14, B5-16,

B5-24, B5-26, B5-28,
B5-36, B5-40, B5-46,
B5-50, B5-54, B5-64,
B5-68
B5-10, B5-14, B5-16,
B5-18, B5-26, B5-28,
B5-36, B5-40, B5-46,
B5-50, B5-56, B5-60,
B5-64, B5-68
B5-10, B5-14, B5-16,
B5-36, B5-40, B5-56,
B5-64, B5-68
B5-10, B5-14, B5-16,
B5-36, B5-40, B5-56,
B5-64, B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-52,
B5-58, B5-66, B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-66,
B5-68
B5-20, B5-22, B5-30,
B5-42, B5-44, B5-48,
B5-52, B5-58, B5-61,
B5-66, B5-68
B5-10, B5-14, B5-16,
B5-20, B5-22, B5-26,
B5-28, B5-30, B5-36,
B5-40, B5-42, B5-44,
B5-46, B5-48, B5-50,
B5-52, B5-56, B5-58,
B5-61, B5-64, B5-66,
B5-68
B5-10, B5-14, B5-16,
B5-20, B5-22, B5-26,
B5-28, B5-30, B5-36,
B5-40, B5-42, B5-44,
B5-46, B5-48, B5-50,
B5-52, B5-56, B5-58,
B5-61, B5-64, B5-66,
B5-68
B5-20
B5-20, B5-22, B5-42,
B5-44, B5-48, B5-61,
B5-66, B5-68
B5-24
B1-15
B1-15
B1-15
B1-15
B1-15
B1-15
B1-15
B1-15
B1-15
B1-17
B1-17
B1-17
Part Number
136707
136708
136709
136710
136711
136712
136713
136714
136715
136716
136717
136718
136719
136720
136721
136722
136723
136724
136734
136735
136736
136737
136738
136739
136740
136741
136742
136743
136744
136745
136746
136747
136748
136749
136750
136751
136752
136753
136754
136755
136756
136757
136758
136759
136760
136761
136769
136770
136771
136772
136773
136774
136775
136776
136777
136778
136779
136780
136781
136782
B1-17
B1-17
B1-17
B1-19
B1-19
B1-19
B1-19
B1-19
B1-19
B1-19
B1-19
B1-19
B1-23
B1-23
B1-23
B1-23
B1-23
B1-23
B1-28
B1-28
B1-28
B1-28
B1-28
B1-28
B1-15
B1-15
B1-15
B1-15
B1-15
B1-15
B1-15
B1-17
B1-17
B1-17
B1-17
B1-19
B1-19
B1-19
B1-19
B1-19
B1-19
B1-19
B1-23
B1-23
B1-23
B1-23
B1-28
B1-28
B1-28
B1-28
B1-16
B1-16
B1-16
B1-16
B1-16
B1-16
B1-16
B1-16
B1-16
B1-16
Page
INDEX-51
B2-38
B2-38
B2-39
B2-39
B2-39
B2-39
B2-39
B2-39
B1-15
B1-19
B1-16
B1-18
B1-20
B1-24
B1-32
B1-30
B2-38
B2-39
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B18-18
B5-48
B5-56
B17-44
B17-44
B17-44
B17-44
B17-44
B17-44
B17-44
B17-44
B17-44
B17-44
B17-44
B17-44
B17-44
B17-44
B17-52
B17-52
B17-52
B17-52
B17-52
B17-52
B17-52
B17-52
B17-52
B17-52
B17-52
B17-52
B17-52
B17-52
B18-25
Part Number
389821
389822
389823
389824
389825
389826
389827
389828
389829
389830
389831
389832
389833
389834
389835
389836
389837
389923
389924
389925
389926
389927
389928
389929
389930
389931
389932
389933
389934
389935
389936
389937
389938
389939
389940
389941
405015
407036
407302
407305
407306
416173
416229
416231
416275
419008
419150
419151
419152
419153
419154
419156
419158
419160
Page
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B4-97, B8-24
B4-97, B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B8-24
B17-34
B15-112
B15-112, B15-124
B15-112, B15-124
B15-124
B19-38
B19-38
B19-38
B19-38
B15-113, B15-124
B15-103, B15-111,
B15-113, B15-124
B15-113, B15-124
B15-103, B15-111,
B15-113, B15-124
B15-113, B15-124
B15-103, B15-111,
B15-113, B15-124
B15-103, B15-111
B15-103, B15-111,
B15-115, B15-124
B15-103, B15-111,
B15-115, B15-124
Plummer Blocks
136978
136979
136980
136981
136982
136983
136984
136985
136986
136987
136989
136990
136991
136992
136994
136995
136997
136998
137101
137102
137103
137104
137105
137106
137107
137108
137109
137110
137111
139292
163256
230050
230053
230056
230059
230062
230065
230068
230071
230074
230077
230080
230134
230137
230140
231063
231069
231075
231081
231087
231096
231102
231108
231114
231120
231126
231135
231141
231150
389820
Page
Sleeve Bearings
B1-24
B1-24
B1-32
B1-32
B1-32
B1-32
B1-32
B1-32
B1-30
B1-30
B1-30
B1-30
B1-30
B1-30
B2-29
B2-29
B2-29
B2-29
B2-29
B2-29
B2-29
B2-29
B2-34
B2-34
B2-34
B2-34
B2-34
B2-34
B2-34
B2-38
B2-38
B2-38
B2-38
B2-38
B2-38
B2-38
B2-38
B2-39
B2-39
B2-39
B2-39
B2-39
B2-39
B2-39
B2-39
B2-29
B2-29
B2-29
B2-29
B2-29
B2-29
B2-34
B2-34
B2-34
B2-34
B2-34
B2-38
B2-38
B2-38
B2-38
Part Number
SLEEVOIL
136870
136872
136891
136892
136893
136894
136895
136896
136897
136898
136899
136900
136901
136902
136912
136913
136914
136915
136916
136917
136918
136919
136920
136921
136922
136923
136924
136925
136926
136939
136940
136941
136942
136943
136944
136945
136946
136947
136948
136949
136950
136951
136952
136953
136954
136955
136956
136957
136958
136959
136960
136961
136962
136963
136964
136965
136974
136975
136976
136977
Page
Take-Up Frames
B1-16
B1-18
B1-18
B1-18
B1-18
B1-18
B1-18
B1-18
B1-20
B1-20
B1-20
B1-20
B1-20
B1-20
B1-20
B1-20
B1-24
B1-24
B1-24
B1-24
B1-24
B1-24
B1-24
B1-32
B1-32
B1-32
B1-32
B1-32
B1-32
B1-32
B1-32
B1-30
B1-30
B1-30
B1-30
B1-30
B1-30
B1-30
B1-30
B1-16
B1-16
B1-16
B1-16
B1-16
B1-16
B1-18
B1-18
B1-18
B1-18
B1-18
B1-18
B1-20
B1-20
B1-20
B1-20
B1-20
B1-20
B1-24
B1-24
B1-24
Part Number
Engineering
136783
136784
136785
136786
136787
136788
136789
136792
136793
136794
136795
136796
136797
136798
136799
136800
136801
136802
136803
136804
136805
136806
136808
136833
136834
136835
136836
136837
136838
136839
136840
136841
136842
136843
136844
136845
136846
136847
136848
136849
136850
136851
136852
136853
136854
136855
136856
136857
136858
136859
136860
136861
136862
136863
136864
136865
136866
136867
136868
136869
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
419162
419164
419166
Sleeve Bearings
419168
419170
419171
419172
419174
419176
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
419178
419180
419181
419182
419183
419184
419185
419187
419188
420030
421243
421244
421245
421246
421247
421248
421249
421250
421251
421252
421253
421254
421255
421256
421257
421258
421259
421260
421261
421262
421263
421264
421265
421266
421267
Keyword Index
421268
421269
421270
Page
B15-103, B15-111,
B15-115, B15-124
B15-103, B15-111,
B15-115, B15-124
B15-103, B15-111,
B15-115, B15-124
B15-103, B15-111,
B15-115, B15-124
B15-103, B15-111,
B15-115, B15-124
B15-103, B15-111
B15-103, B15-111,
B15-115, B15-124
B15-103, B15-111
B15-103, B15-111,
B15-115, B15-124
B15-103, B15-111
B15-113, B15-124
B15-113, B15-124
B15-113, B15-124
B15-113, B15-124
B15-112, B15-124
B15-112, B15-124
B15-112, B15-124
B15-112, B15-124
B16-47
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B13-16
B16-31
B16-31
B16-31
B16-31
B16-31
B15-101, B15-107,
B16-31
B15-101, B15-107,
B16-31
B15-101, B15-107,
B16-31
B15-101, B15-107,
B16-31
B15-101, B15-107,
B16-31
B15-101, B15-107,
B16-31
Part Number
421271
Page
B15-101, B15-107,
B16-31
421272 B15-101, B15-107,
B16-31
421273 B15-101, B15-107,
B16-31
421274 B15-101, B15-107,
B16-31
421275 B15-101, B15-107,
B16-31
421276 B15-101, B15-107
421277 B15-101, B15-107
421278 B15-101, B15-107
421279 B15-101, B15-107
421280 B15-101, B15-107
421282 B15-85, B15-92,
B16-43
421283 B15-85, B15-92
421284 B15-85, B15-92
421285 B15-84, B15-92
421286 B15-84, B15-92
421287 B15-84, B15-85,
B15-92, B16-45,
B16-49
421288 B15-85, B15-92
421289 B15-85, B15-92
421290 B15-84, B15-92
421291 B15-84, B15-92
421292 B15-84, B15-92
421293 B15-85, B15-92
421294 B15-84, B15-92
421362 B13-21
421363 B13-21
421364 B13-21
421365 B13-21
421366 B13-21
421367 B13-21
421368 B13-21
421369 B13-21
421370 B13-21
421371 B13-21
421372 B13-21
421396 B16-31
421399 B16-35
421403 B16-45, B16-49
422001 B15-26, B15-32,
B15-43, B15-54,
B15-70, B16-34
422003 B15-26, B15-32,
B15-43, B15-70,
B16-34
422005 B15-26, B15-32,
B15-43, B15-54,
B15-70, B16-34
422007 B15-26, B15-32,
B15-43, B15-70,
B16-34
Part Number
Page
422009 B15-28, B15-32,

B15-33, B15-43,
B15-54, B15-70,
B16-34
422011 B15-28, B15-33,
B15-43, B15-54,
B15-70, B16-34
422013 B15-28, B15-33,
B15-43, B15-70,
B16-34
422015 B15-28, B15-33,
B15-43, B15-54,
B15-70, B16-34
422017 B15-28, B15-33,
B15-43, B15-54,
B15-70, B16-34
422019 B15-28, B15-33,
B15-43, B15-70,
B16-34
422021 B15-28, B15-33,
B15-43, B15-70,
B16-34
422023 B15-28, B15-33,
B15-43, B15-54,
B15-70
422025 B15-28, B15-33,
B15-43, B15-70
422027 B15-28, B15-33,
B15-43, B15-54,
B15-70
422029 B15-28, B15-30,
B15-33, B15-34,
B15-43, B15-70
422030 B15-30, B15-34,
B15-43, B15-70,
B16-43
422031 B15-30, B15-34,
B15-43, B15-70,
B16-43, B16-47
422035 B15-95, B15-98
422036 B15-85, B15-92
422054 B15-85, B15-92
422064 B15-28, B15-33,
B15-43, B15-70
422123 B15-26, B15-32,
B15-43, B15-70,
B16-34
422124 B15-26, B15-32,
B15-43, B15-70,
B16-34
422134 B15-26, B15-32,
B15-43, B16-34
422137 B15-26, B15-32,
B15-43, B16-34
422140 B15-95, B15-98
422502 B15-84
422511 B15-84, B15-92
422525 B15-85, B15-93
422529 B15-84, B15-85
INDEX-52
Part Number
422531
422535
422538
422542
422543
422544
422545
422554
422555
422556
422560
422567
422571
422572
422573
422576
422580
422582
422588
422594
422595
422596
422597
422599
422600
422601
422602
422603
422604
422606
422843
422844
422978
422979
422980
422981
422982
422983
422984
422985
422986
422987
422988
422989
422990
422991
422992
Page
B15-84, B15-85,
B15-92
B15-85, B15-91
B15-31, B15-44,
B15-71
B15-30, B15-35
B15-30, B15-34,
B15-43, B15-70
B15-30
B15-31, B15-34,
B15-41, B15-84,
B15-91
B15-45, B15-125
B15-67
B15-65
B15-30, B15-35
B15-31, B15-44,
B15-71
B15-67
B15-65
B15-31, B15-34,
B15-41, B15-69,
B15-84, B15-91
B15-84, B15-93
B15-84
B15-84, B15-92
B15-84, B15-91
B15-31, B15-41,
B15-69, B15-84,
B15-91
B17-29
B17-29
B17-29
B17-29
B17-29
B17-29
B17-29
B17-29
B11-45
B15-31, B15-41,
B15-69
B15-85, B15-93
B15-84, B15-85,
B15-92
B16-34
B16-34
B15-48, B15-50
B15-48, B15-50
B15-48, B15-50
B15-48, B15-50
B15-48, B15-50
B15-48, B15-50
B15-48, B15-49,
B15-50, B15-51
B15-49, B15-51
B15-49, B15-51
B15-49, B15-51
B15-49, B15-51
B15-49, B15-51
B15-49, B15-51
432184
432187
432190
432193
432196
432276
432277
432278
432279
432448
433326
434706
434707
434708
434709
434710
434711
434712
434713
434714
434715
434716
434719
434720
434721
434722
434725
434726
434727
434728
434729
434730
434735
434736
434770
434771
434772
434773
460902
460903
460904
460905
INDEX-53
B18-24
B18-24
B18-25
B18-26
B18-24
B18-24
B18-24
B18-24
B18-24
B18-24
B18-24
B18-24
B18-24
B18-24
B18-24
B18-24, B18-25
B18-24, B18-25
B18-24
B18-24, B18-25
B18-24, B18-25
B18-24
B18-24, B18-25
B18-24, B18-25
B18-25
B18-24
B18-24
B18-24
B18-24
B18-24
B18-24
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B18-25
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B17-57
B15-101, B15-111,
B15-112, B15-124
B15-101, B15-111,
B15-112, B15-124
B15-101, B15-111,
B15-112, B15-124
B15-101, B15-111
B15-101, B15-111,
B15-124
Part Number
460906
492598
496400
496401
496402
496403
496404
496405
496406
496407
496408
496409
496410
496411
496412
496413
496414
496415
496416
496417
496418
496419
496420
496421
496422
496423
496424
496425
496426
496427
496428
496429
496430
496431
496432
496433
496434
496435
496436
496437
496438
496439
496440
496442
496443
496444
496446
496447
496448
496449
496450
496451
496452
496453
496454
496455
496456
496457
496458
Page
B15-101, B15-111,
B15-124
B17-29
B16-37
B16-37
B16-37
B16-37
B16-37
B16-37
B16-37
B16-37
B16-37
B16-37
B16-37
B16-37
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-39
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
Plummer Blocks
434774
434775
434797
434835
435001
435002
435003
435004
435005
435006
435007
435008
435009
435010
435011
435012
435013
435014
435015
435016
435017
435018
435019
435021
435027
435028
435029
435030
435031
435032
435033
435035
435036
435037
435038
435039
435040
456225
456226
456227
456228
456229
456230
456231
456232
456234
456235
456236
456237
456238
456239
460901
Page
Sleeve Bearings
430198
430561
430831
431389
431399
432153
432165
432181
B17-34
B18-29
B18-13, B18-15,
B18-17
B18-13
B18-15
B18-15
B18-15
B18-15
B18-13
B18-21
B18-13, B18-18,
B18-23
B18-13, B18-18,
B18-23
B18-13, B18-18,
B18-23
B18-13, B18-18,
B18-22
B18-13, B18-18,
B18-22
B18-13, B18-18,
B18-22
B18-21
B18-21
B18-21
B18-21
B18-21
B18-29
B18-31
B18-31
B18-31
B18-31
B18-31
B18-31
B18-31
B18-31
B18-31
B18-31
B18-31
B18-11, B18-26
B18-26
B18-13, B18-18,
B18-26
B18-26
B18-13, B18-18,
B18-26
B18-26
B18-13, B18-15,
B18-18, B18-26
B18-26
B18-15, B18-17,
B18-18, B18-26
B18-26
B18-18, B18-26
B18-26
B18-24
B18-24, B18-25
B18-24, B18-25
B18-24, B18-25
Part Number
SLEEVOIL
430087
430153
430155
Page
Take-Up Frames
B16-31
B15-98, B16-39
B15-95, B15-98,
B16-39
423104 B15-95, B15-98,
B16-39
423106 B15-95, B15-98,
B16-39
423108 B15-95, B15-98,
B16-39
423110 B15-95, B15-98,
B16-39
423112 B15-98
423114 B15-95, B15-98
423116 B15-95, B15-98
423118 B15-95, B15-98
423120 B15-95, B15-98
423122 B15-95, B15-98
423124 B15-112, B15-121,
B16-37
423125 B15-112, B15-121,
B16-37
423126 B15-112, B15-121,
B16-37
423127 B15-112, B15-121,
B16-37
423128 B15-112, B15-121,
B16-37
423129 B15-112, B15-121,
B16-37
423130 B15-112, B15-121,
B16-37
423131 B15-112, B15-121,
B16-37
423132 B15-114, B15-121,
B16-37
423133 B15-114, B15-121
423134 B15-114, B15-121
423135 B15-114, B15-121
423136 B15-114, B15-121
423137 B15-114, B15-121
423138 B15-114, B15-121
423139 B15-114, B15-121
423140 B15-114, B15-121
423143 B15-112, B15-121,
B16-37
423144 B15-112, B15-121,
B16-37
423145 B16-37
423372 B15-95, B15-98,
B16-39
423373 B15-95, B15-98,
B16-39
423374 B16-39
423375 B16-39
423376 B16-39
430020 B4-102, B5-73,
B6-62, B6-65, B6-67
430081 B17-34
430086 B17-34
Part Number
Engineering
422996
423100
423102
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
SLEEVOIL
Take-Up Frames
Engineering
Part Number Index
Keyword Index
496459
496460
496461
496462
496464
496465
496466
496467
496468
496469
496470
496471
496472
496473
496474
496475
496476
496477
496478
496479
496480
496482
496483
496484
496485
496486
496487
496488
496489
496490
496491
496492
496493
496494
496495
496496
496497
496498
701659
702830
702844
702857
702867
702883
702893
702904
702907
703619
703628
703644
703656
703661
703670
703679
703689
703694
703711
703725
703726
703738
Page
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-33
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-41
B16-41
B16-41
B16-41
B16-41
B16-41
B16-41
B16-41
B16-43, B16-47
B16-43, B16-47
B16-43, B16-47
B16-43
B16-43, B16-47
Part Number
703739
703831
703840
703850
703866
703873
703890
703892
703903
703941
703943
703951
703967
703971
703976
703982
703989
703990
703996
708959
708966
708970
708976
708983
708989
709137
709140
709143
709146
709152
709162
709166
712225
713571
713579
713586
713588
713596
713600
713603
713613
713616
713622
713633
713634
Page
B16-43, B16-47
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-34
B16-31
B16-34
B16-31, B16-34
B16-34
B16-31
B16-34
B16-34
B16-31
B16-34
B16-30, B16-34,
B16-37, B16-39
B16-30, B16-34,
B16-37, B16-39,
B16-41
B16-30, B16-34,
B16-37, B16-39,
B16-41
B16-30, B16-34,
B16-37, B16-39,
B16-41
B16-30, B16-34,
B16-37, B16-39,
B16-41
B16-41
B16-30, B16-34
B16-30, B16-34,
B16-37, B16-39
B16-30, B16-34,
B16-37, B16-39
B16-30, B16-34,
B16-37, B16-39
B16-30, B16-34,
B16-37, B16-39
B16-30, B16-34,
B16-37, B16-39
B16-30, B16-34,
B16-37, B16-39
B16-31, B16-35
B16-30
B16-30
B16-30
B16-30
B16-30, B16-41
B16-30
B16-30, B16-41
B16-30, B16-41
B16-30
B16-30, B16-41
B16-30
B16-30, B16-41
Part Number
713641
713647
719372
719373
719374
719375
719376
719378
719379
719380
719381
719382
719383
719385
719397
719400
719406
719408
719419
719420
719421
719422
719423
719425
719429
719432
719434
719437
719441
719443
719445
719446
719448
719480
719485
719489
719491
719492
719499
725341
725342
725343
725344
725345
725346
725357
725358
725359
725360
725361
725363
725364
725366
734772
738145
738146
738147
738148
738149
738151
INDEX-54
Page
B16-30, B16-41
B16-30, B16-41
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-39
B16-35
B16-35
B16-35
B16-41
B16-41
B16-41
B16-41
B16-41
B16-41
B16-41
B16-43, B16-47
B16-43, B16-47
B16-43, B16-47
B16-43, B16-47
B16-43, B16-47
B16-43, B16-47
B16-43, B16-47
B16-43, B16-47
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-34, B16-35
B16-30
B16-30, B16-41
B16-30, B16-41
B16-30, B16-41
B16-30, B16-41
B16-41
B16-30
B16-30
B16-30
B16-30
B16-30
B16-30
B16-30
B16-30
B18-25
B16-30
B16-30
B16-30
B16-30
B16-30
B16-30
Part Number
738152
738154
738155
738157
738158
738160
738162
738163
738164
738165
738166
738167
738168
738169
738170
739145
739150
739153
739154
739329
740381
740382
740383
740384
740452
740453
740623
741031
741550
744975
744976
744977
744978
744979
744980
744981
744982
744983
744984
744985
744986
744987
744988
744989
744990
744991
747025
747026
747027
747028
747029
Page
B16-30
B16-30
B16-30
B16-30, B16-41
B16-30, B16-41
B16-30, B16-41
B16-30, B16-41
B16-41
B16-30
B16-41
B16-30
B16-41
B16-30
B16-41
B16-30
B16-35
B16-35
B16-35
B16-35
B16-34
B16-30, B16-34
B16-30, B16-34
B16-30, B16-34,
B16-41
B16-30, B16-34,
B16-41
B16-31, B16-35,
B16-37, B16-39
B16-31, B16-35,
B16-37, B16-39
B16-31
B16-31
B16-31
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-30, B16-33
B16-30, B16-33,
B16-37, B16-39
B16-30, B16-33,
B16-37, B16-39
B16-30, B16-33,
B16-37, B16-39
B16-30, B16-33,
B16-37, B16-39
747034
747035
747036
747037
747038
747039
747040
747041
747042
747043
747044
747045
747046
747047
747048
747049
747105
747107
747108
747110
747111
747114
747115
747117
747118
747120
747121
747122
747123
747124
747125
747126
747128
747129
747130
747131
747138
747139
747141
747142
747143
747145
747146
747148
747149
747150
747151
747152
747154
747155
747156
747157
747159
747161
747162
747164
747166
747167
747168
747170
747171
747172
747173
747174
747175
747177
747178
747179
747180
747181
747182
747183
747184
747185
747186
747187
747188
747189
747190
747191
747192
747193
747194
747195
747199
747201
747202
747203
747204
INDEX-55
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-26
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
Part Number
747342
747343
747344
747384
747385
747386
747387
747388
747389
747390
747391
747392
747393
747394
747395
747396
747397
747398
747399
747400
747600
747601
747602
747603
747604
747605
747606
747607
747608
747609
747610
747611
747612
747613
747614
747622
747623
747624
747625
747626
747627
747628
747629
747630
747631
747632
747633
747634
747635
747636
747666
747667
747668
747669
747670
747671
747672
Page
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-34
B16-45
B16-45
B16-43
B16-45
B16-43, B16-45
B16-43
B16-45
B16-43, B16-45
B16-43
B16-45
B16-43, B16-45
B16-43
B16-45
B16-43
B16-45
B16-49
B16-49
B16-47
B16-49
B16-47, B16-49
B16-47
B16-49
B16-47, B16-49
B16-47
B16-49
B16-47, B16-49
B16-47
B16-49
B16-47
B16-49
B16-43, B16-47
B16-43, B16-45,
B16-47, B16-49
B16-43, B16-47
B16-43, B16-45,
B16-47, B16-49
B16-43, B16-47
B16-43, B16-45,
B16-47, B16-49
B16-43, B16-47
Plummer Blocks
747205
747206
747207
747208
747209
747210
747211
747212
747213
747214
747215
747216
747217
747218
747219
747220
747221
747222
747223
747224
747225
747226
747227
747228
747229
747230
747231
747232
747233
747234
747235
747236
747237
747238
747239
747240
747241
747242
747243
747244
747245
747246
747247
747248
747249
747250
747328
747329
747330
747331
747332
747333
747334
747335
747336
747337
747338
747339
747340
747341
Page
Sleeve Bearings
747033
747135
747136
747137
B16-31, B16-34,
B16-35
B16-37, B16-39
B16-41
B16-31, B16-34,
B16-35
B16-41
B16-37, B16-39
B16-31, B16-34
B16-41
B16-31, B16-34
B16-41
B16-31, B16-34
B16-41
B16-31, B16-34
B16-41, B16-45,
B16-49
B16-41
B16-31, B16-34
B16-45, B16-49
B16-43, B16-47
B16-45, B16-49
B16-45, B16-49
B16-43, B16-47
B16-43, B16-47
B16-45, B16-49
B16-45, B16-49
B16-43, B16-47
B16-43, B16-47
B16-45, B16-49
B16-45, B16-49
B16-43, B16-47
B16-43, B16-47
B16-45, B16-49
B16-43, B16-47
B16-45, B16-49
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-35
B16-31, B16-35
B16-31, B16-35
B16-31, B16-35
B16-31, B16-35
B16-31, B16-35
B16-31, B16-35
B16-31, B16-35
B16-26
B16-26
B16-26
B16-26
B16-26
Part Number
SLEEVOIL
747032
747132
Page
Take-Up Frames
747031
B16-30, B16-33,
B16-37, B16-39
B16-30, B16-33,
B16-37, B16-39
B16-30, B16-33,
B16-37
B16-30, B16-33,
B16-37, B16-39
B16-30, B16-33,
B16-37, B16-39
B16-30, B16-33,
B16-37, B16-39
B16-30, B16-33,
B16-37, B16-39
B16-30, B16-33,
B16-37, B16-39
B16-30, B16-33
B16-30, B16-33
B16-30, B16-33
B16-30, B16-33
B16-41
B16-41
B16-41
B16-41
B16-41
B16-41
B16-41
B16-41
B16-31, B16-34,
B16-35
B16-37, B16-39
B16-31, B16-34,
B16-35
B16-37, B16-39
B16-31, B16-34,
B16-35
B16-37, B16-39
B16-31, B16-34,
B16-35
B16-37, B16-39
B16-31, B16-34,
B16-35
B16-37, B16-39
B16-31, B16-34,
B16-35
B16-37, B16-39
B16-31, B16-34,
B16-35
B16-37
B16-31, B16-34,
B16-35
B16-37, B16-39
B16-31, B16-34,
B16-35
B16-37, B16-39
B16-31, B16-34,
B16-35
B16-37, B16-39,
B16-41
Part Number
Engineering
747030
Page
Part Number Index
Part Number
Keyword Index
PART NUMBER INDEX
Plummer Blocks
PART NUMBER INDEX

Part Number
Sleeve Bearings
747673
747681
747682
747683
747684
747686
747688
747690
747706
747707
747708
747709
747710
747711
SLEEVOIL
Take-Up Frames
747712
747713
747721
747722
747723
747724
747726
747728
747730
747746
747747
747748
747749
747750
747751
747753
Engineering
747754
747756
Part Number Index

Keyword Index
747757
747759
747760
747900
747901
747904
747905
747908
747909
747912
747913
747916
747917
747920
747921
747924
747925
747928
747929
747932
747933
747936
Page
B16-43, B16-47
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-43, B16-47
B16-43, B16-45,
B16-47, B16-49
B16-43, B16-47
B16-43, B16-45,
B16-47, B16-49
B16-43, B16-47
B16-43, B16-45,
B16-47, B16-49
B16-43, B16-47
B16-43, B16-47
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-45, B16-49
B16-43, B16-47
B16-45, B16-49
B16-43, B16-45,
B16-47, B16-49
B16-43, B16-47
B16-43, B16-45,
B16-47, B16-49
B16-43, B16-47
B16-43, B16-45,
B16-47, B16-49
B16-43, B16-47
B16-43, B16-47
B16-45, B16-49
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
Part Number
747937
747940
747941
747944
747945
747948
747949
747952
747953
747956
747957
747960
747961
747964
747965
747968
747969
747972
747973
747976
747977
747980
747981
747984
747985
747988
747989
747992
747993
747996
747997
748000
748001
748004
748005
748008
748009
748012
748013
1029557
B48371
C11235
C14203
Page
Part Number
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B16-12
B2-58
B18-21
B18-21
B18-21
INDEX-56
Page
Part Number
Page
ISNX Bearing Inserts
Accessories
B16-18
SDX B16-42
B2-77
SDXD B16-46
Extreme Duty Setscrew Ball Bearing
B3-41
Extreme Duty Setscrew Ball Bearings
B3-42
B4-98
Bearing Inserts
B12-48
Setscrew VSC Ball Bearings
B8-26
End Covers
B12-50
Ultra Kleen
B1-35
UNISPHERE II
B13-12
Ductile
B6-62
Eccentric Collar
B7-44
E-Family Bearings
Eccentric SXV Collar
B9-36
E-Z Kleen Mounted Bearings
Grip Tight
B5-12
Easy Selection
B4-98
E-Z Kleen
Anti-Rotation Pin
D-Lok Ball Bearings
B6-4
Eccentric Collar
E Family Inch
B10-43
E
B2-1
B2-12
B3-3
Ultra Kleen
B1-7
B7-4
Eccentric Collar Ball Bearings
B4-4
Eccentric SXV Collar Ball Bearings

Engineering / Technical
B10-1
B7-1
B9-1
B20-1
English Standard Measures
B20-23
D-Lok Ball Bearings
B6-62
Expansion of Shafting
B20-17
B9-37

F
Ball Bearing End Covers
Grip Tight
B5-73
B4-106
B4-3
B3-1
Features/Benefits
Features/Benefits B1-3
Bearing Life Adjustment Factor
D-Lok Ball Bearings
B6-3
Bearing Load Calculations
E-Z Kleen
B2-3
Eccentric Collar
B7-3
Centrifugal Force
B3-2
Coatings
Grip Tight Adapter Ball Bearings
B5-2
Imperial IP, ISAF and ISN
D-Lok Ball Bearings
B6-62
B4-98
Imperial-HD B14-6
Coefficients of Friction f
B20-39
Imperial-IP B14-4
Common Conversion Factors
B20-28
ISAF B14-10
Concentric Clamp Collar
ISN and ISNX HYD
B6-3
Concentric Clamp Collar D-Lok Ball Bearings

Conveyor Belt FPM to RPM
B6-3
ISN and ISNX
D
D-Lok Ball Bearings
B14-12
Plummer Blocks
B20-11
B16-3
Seals B16-25
SNX B16-23
B6-1
Dimensions
S-2000
B12-2, B12-6
Imperial IP, ISAF ISN and ISNX
B14-30
B4-3
Plummer Blocks
B16-13
B8-2
Imperial Spanner
B16-22
Sleeve Bearings
ISN Bearing Inserts
B16-16
Sleevoil B18-3
ISN End Covers
B16-21
Specialty Tapered
ISN Lockplate Kits
B16-21
All Steel
B11-4
ISN Plummer Blocks with Labyrinth Seals
B16-15
Special Duty
B11-3
ISN Plummer Blocks with Trident Seals
B16-13
Type C
B11-2
KEYWORD-1
SLEEVOIL
D-Lok Ball Bearings
Take-Up Frames
B6-12
Engineering
D-Lok Ball Bearings
Sleeve Bearings
B12-14
Part Number Index
Air Handling
SNX B16-26
S-2000
B17-2
Keyword Index
E-Z Kleen
Plummer Blocks
KEYWORD INDEX
Plummer Blocks
KEYWORD INDEX
Take-Up Frames
B19-2
Bronzoil B19-4
Center Pull
B19-3
Heavy Duty
B19-5
Light Duty
B19-4
Narrow Slot
B19-2
I
Installation
Specialty Tapered
All Steel
Sleeve Bearings
Wide Slot
Lubrication
D-Lok Ball Bearings
Type E-Xtra, Double-Interlock, Type K/TAF/EXL Bearings
B10-2
Eccentric Collar
UNISPHERE II
B13-2
SXV Collar
B1-3
Unified SAF
B10-13
L
B19-2
Ultra Kleen
B11-24
Type E Family
B19-3
TPHU B19-3
B11-51
Special Duty
Telescoping B19-2
Top Angle
B14-1
B6-7
B7-6
B9-3, B9-36
Grip Tight
B5-5
Imperial
SLEEVOIL
SAF and SDAF Pillow Blocks
B15-3
IP, ISAF ISN and ISNX
SAF with Split-Spher Bearing
B15-5
ISNX B14-16
SAF-XT and SAFS
B15-6
S-2000 B12-8
B9-2
Flywheel Formulas
B20-35
Formulas and Constants
B20-34
Take-Up Frames
G
Grip Tight Ball Bearings
B5-1
B11-51
Type E Family
B10-13
Type E Family Bearings
B10-72
Unified SAF
B15-20
Split-Spher B15-76
B20-39
UNISPHERE II
Engineering

E-Z Kleen
B13-5
M
B6-5
E Family
Type E-Xtra, Type K, Double-Interlock, TAF and EXL
B11-21, B11-24
All Steel
How to Order
D-Lok Ball Bearings
B4-7, B4-98
Specialty Tapered
H
Hardness Comparison
B14-15
Maintenance
Specialty Tapered
B11-24
B10-9
All Steel
B11-51
B10-67
Type E Family
B10-13
B2-8
Material Characteristics
B20-12
Eccentric Collar
B7-5
Mathematical Equations
B20-36
Grip Tight
B5-4
Metric System of Measurements
B20-26
Imperial
IP, ISAF and ISN
ISN and ISNX HYD
Part Number Index

Sleeve Bearings
Misalignment
B14-8
B14-13
B4-5
B17-4
D-Lok Ball Bearings
B6-6
Eccentric Collar
B7-6
Grip Tight
B5-5
B14-15
Sleevoil B18-7
S-2000 B12-8
Specialty Tapered
All Steel
B11-47
Special Duty Hinged Cap
B11-21
Type C
Take-Up Frames
UNISPHERE II
B4-7
B13-5
Modifications/Accessories
Keyword Index
B11-6
D-Lok Ball Bearings
B6-62
B19-6
Eccentric Collar
B7-44
B9-36
Ultra Kleen
B1-6
Unified SAF
B15-7
USAF B15-54
Sleevoil B18-22
Type E-Xtra End Closure Kits Inch
KEYWORD-2
B10-65
D-Lok Ball Bearings
B6-6
B10-66
Eccentric Collar
B7-6
B9-3
E-Z Kleen
B2-9
B6-5
Grip Tight
Eccentric Collar
B7-5
Grip Tight
B5-4
B5-5
B14-14
Imperial-HD B14-27
Imperial-IP B14-26
Imperial-IP B14-9
ISAF B14-28
ISAF B14-11
ISNX B14-16
B14-13
Plummer Blocks ISN
B16-6
S-2000 B12-5
Imperial Spherical Roller Bearings
B16-7
Plummer Blocks
B4-102
Sleeve Bearings
B14-17
Imperial Housing Styles

ISN Easy Selection
B17-5
B16-9
ISN Plummer Blocks with Labyrinth Seals
B16-14
Sleevoil B18-7
ISN Plummer Blocks with Trident Seals
B16-12
Specialty Tapered
ISN Ratings
B11-22, B11-48
Type C
B11-6
Take-Up Frames
B19-7
B10-10
Unified SAF
B15-8
UNISPHERE II
B13-3
O
Oil Level and Filtration System Sleevoil
B18-30
Oil Ring Sleevoil
B18-27
Oil Viscosity Classification
B20-22
Overhung Loads
B20-36
P
Plummer Blocks
B16-1
Proguard Plus Seal
B4-98
Proguard Plus Seal D-Lok B6-62

Proguard Plus Seal Setscrew Ball Bearings
Properties of Sections
B4-98
B20-38
R
Radial Loads Inch and Metric
B9-4
B16-8
S-2000 B12-7
B3-5, B4-6
B8-3
Sleeve Bearings
B17-6
Babbitted and Bronze-Bushed
B17-34
Specialty Tapered
Special Duty
B11-23
Type C
B11-7
B10-67
B10-68
B10-11
Unified SAF
B15-19
Unified Pillow Block

Selection Specialty Tapered All Steel
UNISPHERE II
B15-13
B11-49
B13-4
Cool Lube 2 System
B15-131
D-Lok B6-10
Related Products
E-Z Kleen
B2-26
D-Lok B6-65
Eccentric Collar
B7-12
Eccentric Collar
B7-47
B9-6
B9-37
B3-8
Grip Tight
B5-70
Grip Tight
B4-99
Grip Tight Thin Wall Adapter Ball Bearings
B5-76
B4-12
Ball Bearing End Covers
Setscrew Ball Bearings High Temp SC and SCM

S
S-2000
B4-102
B12-1

Sleeve Bearings
Seals
B5-8
B8-8
B17-10, B19-43
Seals D-Lok Ball Bearings
B6-62
Babbitted B17-38
B9-36
Bronze-Bushed B17-50
B4-3
Bronzoil B17-54

Unified SAF
SLEEVOIL
ISN and ISNX HYD
Sleeve Bearings
D-Lok Ball Bearings
Take-Up Frames
Nomenclature
B15-19
KEYWORD-3
Shaft Collars
Part Number Index
Type K, Double-Interlock and TAF End Covers

N
Selection
B10-64
B17-57
Keyword Index
E-Tect Seal Kits
Engineering
Type E-Xtra, Type K, Double-Interlock, TAF
Plummer Blocks
KEYWORD INDEX
Plummer Blocks
KEYWORD INDEX
Sleevoil
B11-1
R Series
B18-10
RTL Series
B18-18
E-Family B10-8
RXT Series
B18-20
Specialty Tapered Type C
B11-5
B14-5
B14-7
Specialty Tapered
Specification
Sleeve Bearings
All Steel
B11-54
Imperial IP, ISAF and ISN Imperial-HD
Special Duty Flange Bearing
B11-36
S-2000 B12-4
B11-42
Sleevoil B18-7
Special Duty Pillow Block
B11-30
Specialty Tapered
Special Duty Units
B11-38
Type C
B11-8
Take-Up Frames
Spherical Roller Bearings
B19-25, B19-29
Take-Up Bearings Type A & B
B19-45
SLEEVOIL
Telescoping B19-15
Take-Up Frames
B19-8
All Steel
B11-46
B11-20
Unified SAF
B15-7
UNISPHERE II
B13-3
Sleeve Bearings
B17-4
Strength and Physical Properties of Various Metals

T
B20-37
Bronzoil B19-44
Take-Up Frames
Center Pull
B19-26
Torque and Horsepower Equivalents
B20-36
Heavy Duty Protected Screw
B19-36
Trigonometric Formula
B20-40
Light Duty Protected Screw
B19-30
Narrow Slot
Take-Up Frames
Top Angle Protected Screw
B19-8
B19-20
TPHU B19-24
Wide Slot
B19-11
Tapered Roller Bearings
B19-29
B10-21
Unified SAF
SAF-XT and SAFS
B15-55
Split-Spher B15-72
U
U. S. Standard Sheet Metal Gages
Ultra Kleen Mounted Bearings
Engineering
Ultra Kleen
V-Belt Cross Sections - Nominal
B4-1
V-Belt Drive Formulas
B20-10
B18-29
Vibration Frequencies
Shafts
Part Number Index
Shaft Bearings
B20-17
Shaft Couplings
B20-17
Shaft Diameters Selection
B20-15
Shaft Keyseats
B20-17
Shafting B20-14
Keyword Index
Other Than Standard
B20-17
Steel Weights and Properties
B20-20
Shafting Expansion
B20-19
High Speed
B20-17
Stepped B20-17
Sleeve Bearings
B17-1
Sleevoil
B18-1
B20-11
Vibration Detector Adapter Kit Sleevoil
B1-15
B8-1
B13-1
V
B15-26
B15-1
UNISPHERE II
USDAF B15-82
B20-39
B1-1
Unified SAF
USAF B15-94
USAF 500
B19-1
KEYWORD-4
B20-2

CA 3000 Bearing Catalogue

Загружено:

Сведения о документе

Авторское право

Доступные форматы

Поделиться этим документом

Поделиться или встроить документ

Параметры публикации

Этот документ был вам полезен?

Это неприемлемый материал?

Авторское право:

Доступные форматы

CA 3000 Bearing Catalogue

Загружено:

Авторское право:

Доступные форматы

BEARING

Mounted Roller Bearings

To receive a copy of the Dodge Bearing

AMERICAN GEAR MANUFACTURERS ASSOCIATION

MECHANICAL POWER TRANSMISSION ASSOCIATION

AMERICAN BEARING MANUFACTURERS ASSOCIATION

BEARING SPECIALISTS ASSOCIATION

POWER TRANSMISSION DISTRIBUTORS ASSOCIATION

CONVEYOR MANUFACTURERS ASSOCIATION

Dodge Products are

In illustrations throughout this catalog, safety guards

2012 Baldor Electric Company

For Additional information and Dodge Product Manuals on

Baldor Electric Company

All Rights Reserved. Printed in USA.

Polymer-Housed Polymer Sleeve Bearings

440C Stainless steel inserts

Polymer housing contains additive that

All polymer and stainless steel construction

Solid polymer housing has no cavities and

20-50mm Metric bore

Conforms to FDA /USDA specifications

Polymer sleeve insert with stainless steel

No lubrication required, self-lubricated polymer sleeve insert for

Snap-in style end covers available from stock

ULTRA KLEEN - SS Inserts Ball Bearings

Operates in temperatures from -40F to 180F

E-Z KLEEN Ball Bearings

Extreme Duty / SCED SCMED Ball Bearings

Two types: polymer housed units

Offered in a wide variety of housing configurations and all

- PSS = Polymer Housing, Stainless Insert

Synthetic grease / Mobilith SHC 220 PM

Two inserts: corrosion resistant

Other shaft attachment methods are available upon request

Snap-in style end covers available from stock

Wide inner ring design

Anti-Rotation Pin to prevent insert from spinning in housing

OptionalBEV modification for the beverage industry

Interchangeable mounting dimensions with most competitive

Anti-rotation device prevents insert rotation associated with light

Three locking styles: 65 setscrew angle (SC), concentric clamp

Plus or minus 2 static misalignment

Setscrew Ball Bearings

D-LOK Ball Bearings

Two types: normal duty SC, medium

Two types: normal duty DL and

DualGuard seal - comprised of single

DualGuard seal - comprised of

Interchangeable mounting dimensions with most competitive

Interchangeable mounting dimensions with most competitive

65 setscrew angle for greater holding power and ease of

Concentric clamp collar locks the bearing to the shaft by

Anti-rotation device on SC and SCM bearings prevents insert

Anti-rotation device prevents insert rotation associated with light

High-temperature option available to 400F on SC and SCM

Expansion and non-expansion pillow blocks available for popular

Plus or minus 2 static misalignment

High-temperature option available to 400F

GRIP TIGHT Ball Bearings

Eccentric Collar Ball Bearings

Two types: normal duty GT and

Two types: normal duty SXR and SLX

DualGuard seal - comprised of single