Вы находитесь на странице: 1из 33

Item: 1

How can you dual boot between Windows Vista and Windows
7 when the computer has only one disk and a single partition?
Answer:
Create a virtual hard drive (VHD) and install Windows 7 on the
VHD
Objective:
Deploying Windows 7
Item: 2
Which utility can you use to create the Autounattend.xml file
to automate the installation of Windows 7 by booting the
Windows 7 DVD?
Answer:
Windows System Image Manager (Windows SIM)
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 3
How would you block a user from using FTP on certain
subnets?
Answer:
Create a rule in Windows Firewall with Advanced Security
Objective:
Configuring Network Connectivity
Item: 4
To install Windows 7 on a computer by booting from a flash
drive, what partition must you set to Active?
Answer:
the partition on the USB flash drive
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 5
What is the netsh command to enable the DHCP Quarantine
Enforcement Client on a Windows 7 computer?
Answer:
net sh nap cl i ent set enf or cement I D = 79617
Admi n = " ENABLE"
Objective:
Configuring Mobile Computing
Item: 6
Which Sysprep switch enables OEMs and corporations to add
customizations to their Windows images?
Answer:
/ audi t
Objective:
Deploying Windows 7
Item: 7
What prefix will be used with an IPv6 unique local address?
Answer:
FD00::/8
Objective:
Configuring Network Connectivity
Item: 8
If a workstation on subnet A has an IP address of
192.168.0.35/28 and the gateway for that subnet has an IP
address of 192.168.0.33/28, what could the IP addresses be
for another workstation on subnet A?
Answer:
any IP address between 192.168.0.33 and 192.168.0.46,
except 192.168.0.35 and 192.168.0.33
Objective:
Configuring Network Connectivity
Item: 9 Answer:
How can you restore credentials of a Web site to your
computer after they have been accidently deleted from your
computer?
Use the Restore Vault option in Credential Manager to restore
credentials from another disk or location.
Objective:
Configuring Access to Resources
Item: 10
What command is used to clear the contents of a BranchCache
cache on a Windows 7 computer?
Answer:
the netsh branchcache flush command
Objective:
Configuring Access to Resources
Item: 11
What is the name of the executable used to create a system
recovery disc?
Answer:
recdisc.exe
Objective:
Configuring Backup and Recovery Options
Item: 12
What utility should you use to prevent programs from starting
when you log in to your Windows 7 computer?
Answer:
msconfig
Objective:
Configuring Hardware and Applications
Item: 13
What is the filename of the report created by the PowerCfg -
energy command?
Answer:
energy-report.html
Objective:
Configuring Mobile Computing
Item: 14
What printer permission allows a user to restart their print job?
Answer:
Print
Objective:
Configuring Access to Resources
Item: 15
What VPN tunnel type allows the user to specify the network
outage time for mobility?
Answer:
IKEv2
Objective:
Configuring Mobile Computing
Item: 16
What is the PowerShell cmdlet that creates a persistent
connection to a local or remote computer?
Answer:
New-PSSession
Objective:
Configuring Network Connectivity
Item: 17
On what tab on the Remote Desktop connection can you
choose the setting to optimize the desktop connection speed
and prevent the remote computer's desktop background from
Answer:
the Experience tab
displaying on your screen?
Objective:
Configuring Access to Resources
Item: 18
Where do you need to configure the WinRM service to run
remote commands?
Answer:
The WinRM listener requires configuration on both client and
server computers.
Objective:
Configuring Network Connectivity
Item: 19
When installing Windows 7 on a VHD on a new physical drive,
what will be displayed for the DISK number assigned to the
VHD?
Answer:
Unallocated Space
Objective:
Deploying Windows 7
Item: 20
Members of what two groups can shrink a volume on a disk?
Answer:
Backup Operators and Administrators
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 21
How could you prevent Internet Explorer 8 from opening a
*.jpg file when you click on the file in Windows Explorer?
Answer:
Associate the .jpg file type with an application that is not IE 8
Objective:
Configuring Hardware and Applications
Item: 22
Which option with ImageX allows you to store a copy of a
volume to a *.wim image file?
Answer:
/ capt ur e
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 23
What must be enabled on a Windows XP SP3 computer so
that a user can use Network Level Authentication to connect
via Remote Desktop to a Windows 7 computer?
Answer:
Turn on the Credential Security Service Provider (CredSSP) to
enable Network Level Authentication on the Windows XP SP3
computer.
Objective:
Configuring Network Connectivity
Item: 24
What tool contains LoadState and ScanState?
Answer:
User State Migration Tool (USMT)
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 25
What User Account Control (UAC) setting will allow a user to
interact with the desktop while a prompt is active?
Answer:
the Notify me only when programs try to make changes to
my computer (do not dim my desktop) option
Objective:
Configuring Access to Resources
Item: 26
What utility can you use to upgrade an image from Windows 7
Home Premium edition to Windows 7 Professional edition?
Answer:
DI SM / Set - edi t i on
Objective:
Deploying Windows 7
Item: 27
How do you apply an application control policy to multiple
computers in a domain?
Answer:
Use a GPO
Objective:
Configuring Hardware and Applications
Item: 28
What utility do you use to manage the boot manager in
Windows 7?
Answer:
BCDedit
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 29
Which versions of Windows 7 can use the HomeGroup feature
but cannot create a homegroup?
Answer:
Windows 7 Starter and Windows 7 Home Basic
Objective:
Configuring Access to Resources
Item: 30
What is the minimum of graphics card that is required to install
Windows 7 on a computer?
Answer:
A graphics card that supports a DirectX 9 graphics processor
with a WDDM 1.0, or higher, driver
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 31
What ports have to open on a BranchCache client's firewall if it
is configured in Hosted Cache mode?
Answer:
TCP port 80
Objective:
Configuring Access to Resources
Item: 32
Which ImageX switch places a volume image on a hard drive?
Answer:
/ appl y
Objective:
Deploying Windows 7
Item: 33
Where should the IP address of the gateway for a Windows 7
computer be located?
Answer:
On the same subnet as the computer
Objective:
Configuring Network Connectivity
Item: 34
What tools are contained in the Windows Automated
Installation Kit?
Answer:
z Windows System Image Manager (Windows SIM)
z ImageX
z Deployment Image Servicing and Management (DISM)
z Windows Preinstallation Environment (Windows PE)
User State Migration Tool (USMT)
Objective:
Deploying Windows 7
Item: 35
What are two ways to determine the IP address of the DHCP
server that issued the IP address lease to your computer?
Answer:
Check the details of the Network Connection of the network
adapter, or run ipconfig /all from an administrative command
prompt
Objective:
Configuring Network Connectivity
Item: 36
What are two ways to apply a .wim image to a VHD?
Answer:
use the Install-WindowsImage.ps1 Windows PowerShell
script or the ImageX.exe utility
Objective:
Deploying Windows 7
Item: 37
How can you encrypt offline files on a Windows 7 computer?
Answer:
Open Sync Center in Control Panel and choose Manage
offline files. On the Encryption Tab, choose Encryption.
Objective:
Configuring Mobile Computing
Item: 38
What must you do for a Hyper-V client to trust the certificate
authority that issued the certificate for the service on a Hyper-V
server?
Answer:
The client computer needs the root CA certificate in imported in
to its Trusted Root Certification Authorities.
Objective:
Configuring Access to Resources
Item: 39
What must be started in order to defrag all volumes during non-
business hours?
Answer:
the task scheduler service
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 40
What should you configure in Internet Explorer 8 to allow users
to see all intranet Web sites that were configured for a previous
version of Internet Explorer?
Answer:
Go to Tools > Compatibility View Settings and select
Display intranet sites in Compatibility View
Objective:
Configuring Hardware and Applications
Item: 41
How do you prevent a particular update from being installed on
the computer?
Answer:
Hide the update
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 42
What tool prepares an installation of Windows for duplication,
auditing, and customer delivery?
Answer:
Sysprep
Objective:
Deploying Windows 7
Item: 43
Where in Internet Explorer 8 can you import a certificate?
Answer:
Access Certificates on the Content tab of Internet Options to
import the certificate
Objective:
Configuring Hardware and Applications
Item: 44
What type of record in DNS would you create for a server
named sql22.verigon.com server that has an IP address of
2001:db8::10:2aa:ff:fe21:5a88?
Answer:
AAAA
Objective:
Configuring Network Connectivity
Item: 45
Which operating systems can support BitLocker to Go?
Answer:
Windows 7 and Windows Server 2008 R2
Objective:
Configuring Mobile Computing
Item: 46
How do you get new features of a new Windows 7 edition
when you use Windows Anytime Upgrade to upgrade from one
Windows 7 edition to another?
Answer:
Windows Anytime Upgrade installs the extra components of
the new Windows 7 edition from the Component-Based
Servicing (CBS) store located on the system
Objective:
Deploying Windows 7
Item: 47
What utilities can you use to display the IPv6 address of a
computer?
Answer:
netstat, netsh, route, and ipconfig
Objective:
Configuring Network Connectivity
Item: 48
When BitLocker is used with operating system drives, which
file systems can the drive be formatted with?
Answer:
the NTFS file system only
Objective:
Configuring Mobile Computing
Item: 49
What type of record in DNS would you create for a server
named sql21.verigon.com server that has an IP address of
10.88.16.24?
Answer:
an A record
Objective:
Configuring Network Connectivity
Item: 50
Which ScanState parameter should you use to create the
config.xml file?
Answer:
/ genconf i g:
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 51
What happens when you run Sysprep on a computer that is a
member of a domain?
Answer:
Sysprep removes the computer from the domain
Objective:
Deploying Windows 7
Item: 52
What should you configure in Internet Explorer 8 to allow users
to see a Web site that was configured for a previous version of
Internet Explorer?
Answer:
Add the site in the Compatibility View settings
Objective:
Configuring Hardware and Applications
Item: 53
If a file was encrypted by User1, how could User2 get access
to the file?
Answer:
User1 must add User2's certificate to the file before User2 can
access it.
Objective:
Configuring Access to Resources
Item: 54
How do you flush the resolver cache of a Windows 7 computer
without rebooting?
Answer:
run ipconfig /flushdns
Objective:
Configuring Network Connectivity
Item: 55
What are three reasons why a computer configured with the
correct subnet mask cannot ping another station on a different
subnet by IP address?
Answer:
Wrong IP address, wrong default gateway, or wrong mask on
the destination station
Objective:
Configuring Network Connectivity
Item: 56
What actions can a user remotely perform on files in a shared
folder if the user's shared permissions are Full Control and the
user's NTFS permissions are Read?
Answer:
The user can only have read access to the files.
Objective:
Configuring Access to Resources
Item: 57
What prefix will be used with an IPv6 link-local address?
Answer:
FE80::/10
Objective:
Configuring Network Connectivity
Item: 58
How can you allow information from being shared with some
content providers but not others?
Answer:
In InPrivate Filtering, choose the content provider and set
Choose content to block or allow.
Objective:
Configuring Hardware and Applications
Item: 59
Which option should you add to the bcdedi t / def aul t
statement to ensure that a legacy operating system prior to
Vista, such as Windows XP, will be the default choice in a dual
boot configuration?
Answer:
{nt l dr }
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 60
When should you set Allow Connections from computers
running Remote Desktop with Network Level
Authentication in the system properties?
Answer:
When you have computers running Windows Vista, Windows
7, or Windows Server 2008 that want to remotely connect to
your computer
Objective:
Configuring Network Connectivity
Item: 61
What can you use to resolve compatibility issues with an
outdated application and Windows 7?
Answer:
implement application compatibility fixes, also referred to as
shims
Objective:
Configuring Hardware and Applications
Item: 62
What symbolizes a driver conflict in Device Manager?
Answer:
a yellow exclamation point
Objective:
Configuring Hardware and Applications
Item: 63
What can you use as a stopgap solution for compatibility
problems with Windows7 for an off-the-shelf application that is
not business critical?
Answer:
implement application compatibility fixes, also referred to as
shims
Objective:
Configuring Hardware and Applications
Item: 64
Which DISM switch can you use to upgrade an image of
Windows 7 Professional edition to Ultimate edition?
Answer:
/ Set - Edi t i on
Objective:
Deploying Windows 7
Item: 65 Answer:
What utility should you use to add a driver to a Windows PE
image if the driver .sys file requires a reboot?
PEImg.exe
Objective:
Deploying Windows 7
Item: 66
How do you allow Internet Explorer 8 to open proprietary *.ctx
files?
Answer:
Associate the .ctx file type with Internet Explorer 8
Objective:
Configuring Hardware and Applications
Item: 67
What PowerShell command is used to create a directory called
c:\somedirectory?
Answer:
New- I t em" c: \ somedi r ect or y" - t ype di r ect or y -
f or ce
Objective:
Configuring Network Connectivity
Item: 68
What type of IPv6 address is used for unicast packets sent
through the public Internet?
Answer:
Global unicast
Objective:
Configuring Network Connectivity
Item: 69
What must you set on the properties of a wireless connection
to ensure that you can attach to an SSID that is not
broadcasting?
Answer:
set the Connect even if the network is not broadcasting
option
Objective:
Configuring Network Connectivity
Item: 70
If a workstation on subnet A has an address of 10.0.17.1/20,
what possible addresses can the default gateway for subnet A
have?
Answer:
any IP address between 10.0.16.1 and 10.0.31.254, except
10.0.17.1
Objective:
Configuring Network Connectivity
Item: 71
If you want a Removable Storage Devices policy to apply to
all sites and organizational units in a domain, where should you
link the group policy object?
Answer:
in the domain
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 72
How do you resolve a conflict between an on-board network
adapter and an add-on network adapter if the on-board
network adapter cannot be turned off in the BIOS?
Answer:
Disable the on-board network adapter in Device Manager
Objective:
Configuring Hardware and Applications
Item: 73
Members of what group have permissions to back up files and
Answer:
members of the Backup Operators group
directories to which they do not have permissions?
Objective:
Configuring Backup and Recovery Options
Item: 74
What type of AppLocker rule would you apply to deny users
from running software from a specific software company?
Answer:
Publisher rule
Objective:
Configuring Hardware and Applications
Item: 75
How can you test the memory in your computer with a system
repair disk?
Answer:
On System Recovery Options, choose Windows Memory
Diagnostic
Objective:
Configuring Backup and Recovery Options
Item: 76
What must you set your in computer's BIOS to install Windows
7 on a computer by booting from a flash drive?
Answer:
Configure the BIOS so the computer will boot to the USB drive
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 77
What must you run on your Windows XP computer to save
your files and settings before installing Windows 7?
Answer:
Easy Transfer Wizard
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 78
How do you prevent specific files or folders from being shared
after creating or joining a homegroup?
Answer:
Right-click the file or folder and choose Share with Nobody.
Objective:
Configuring Access to Resources
Item: 79
What utility can you use to upgrade an image from Windows
7 Professional edition to Windows 7 Ultimate edition?
Answer:
DISM
Objective:
Deploying Windows 7
Item: 80
Where can you find the recent programs that have been
installed on a Windows 7 computer?
Answer:
Control Panel > Programs and Features
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 81
When a client is configured to use BranchCache in Distributed
Answer:
you must configure the firewall to allow incoming HTTP and
Cache mode, what must be configured in the client firewall? WS-Discovery traffic
Objective:
Configuring Access to Resources
Item: 82
What type of migration is used when the source and
destination computer are the same?
Answer:
Wipe-and-load migration
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 83
Which editions of Windows 7 support BitLocker To Go?
Answer:
Enterprise and Ultimate editions
Objective:
Configuring Mobile Computing
Item: 84
What utility can you use to check your system for unsigned
drivers?
Answer:
The Driver Verifier tool, sigverif.exe
Objective:
Configuring Hardware and Applications
Item: 85
What can a user do to run command-line utilities such as
Defrag, Chkdsk and IPConfig in Windows 7?
Answer:
open an administrative command prompt
Objective:
Configuring Access to Resources
Item: 86
What happens if you run Sysprep on an NTFS file system
partition that contains encrypted files or folders?
Answer:
the data in those folders becomes completely unreadable and
unrecoverable
Objective:
Deploying Windows 7
Item: 87
What utility is used to apply a custom shim (compatibility fix)
database?
Answer:
The sbdinst.exe utility
Objective:
Configuring Hardware and Applications
Item: 88
What utility would you use to add an entry into the boot menu?
Answer:
BCDedit
Objective:
Deploying Windows 7
Item: 89
If you boot a Windows 7 DVD on a Windows Vista computer
and choose custom installation, what will happen to your
previous settings for programs?
Answer:
They will be erased when the new installation of Windows 7 is
completed.
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 90
How can you run an executable as another user from the
command line?
Answer:
use the RUNAS command
Objective:
Configuring Access to Resources
Item: 91
Which network location type is only supported with a
homegroup?
Answer:
the Home network location
Objective:
Configuring Access to Resources
Item: 92
When using Backup Vault in Credential Manager to save
credentials, what must you specify with the credential file?
Answer:
A password
Objective:
Configuring Access to Resources
Item: 93
What utility in Windows 7 can you use to control what .dll files
a user can load on their computer?
Answer:
AppLocker
Objective:
Configuring Hardware and Applications
Item: 94
How can you block a program on the Public network but allow
the program on the Private network?
Answer:
Use Windows Firewall to block the program on the Public
network profile
Objective:
Configuring Network Connectivity
Item: 95
What switch would you use with msiexec.exe to apply an
update package to an .msi file?
Answer:
msiexec.exe /p
Objective:
Configuring Hardware and Applications
Item: 96
What utility can be used to modify Windows Vista SP1,
Windows Server 2008, and Windows 7 images?
Answer:
Deployment Image Servicing and Management (DISM)
Objective:
Deploying Windows 7
Item: 97
Without changing file permissions, what utility can you use to
limit the .exe files a user can run on their computer?
Answer:
AppLocker
Objective:
Configuring Hardware and Applications
Item: 98
What DISM switch will add a product key to a Windows Vista
SP1, Windows Server 2008 or Windows 7 image that is offline?
Answer:
/ Set - Pr oduct Key
Objective:
Deploying Windows 7
Item: 99
What methods are supported by the Easy Transfer Wizard to
copy files and settings?
Answer:
a USB flash drive (UFD), a network connection, or an Easy
Transfer cable
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 100
What policy should you enable in a GPO to audit registry keys
on a computer?
Answer:
Enable Audit object access under Audit Policy.
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 101
What GUI utility can you use to create a VHD?
Answer:
Disk Management snap-in
Objective:
Deploying Windows 7
Item: 102
Which wireless security types use the encryption type of AES?
Answer:
WPA2-Enterprise and WPA2-Personal
Objective:
Configuring Network Connectivity
Item: 103
What policy should you enable in a GPO to audit files and
directories on a computer?
Answer:
Enable Audit object access under Audit Policy.
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 104
What files cannot be transferred by the Easy Transfer Wizard
to another computer?
Answer:
Program files and system files, such as fonts and drivers
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 105
How can you update a device driver?
Answer:
In Device Manager, choose Update Driver on the Driver tab in
the Properties window of the driver
Objective:
Configuring Hardware and Applications
Item: 106
Which VPN tunnel type uses machine authentication via
Answer:
VPN Reconnect
IKEv2?
Objective:
Configuring Mobile Computing
Item: 107
How can you ensure certain PXE-enabled computers retrieve
images only from a particular WDS server?
Answer:
Prestage the client
Objective:
Deploying Windows 7
Item: 108
What are the three default power plans included with Windows
7?
Answer:
Balanced, Power Saver, and High Performance
Objective:
Configuring Mobile Computing
Item: 109
Which ImageX switch will add a volume image to an existing
image file?
Answer:
/ append
Objective:
Deploying Windows 7
Item: 110
What is the problem with using an APIPA address to
communicate with stations on a different subnet?
Answer:
An APIPA address does not give the computer a default
gateway
Objective:
Configuring Network Connectivity
Item: 111
What file can you use to have Windows scripts make
modifications after Windows Setup completes?
Answer:
the %WINDIR%\Setup\Scripts\SetupComplete.cmd file
Objective:
Deploying Windows 7
Item: 112
Besides update history in Windows Updates, where else can
you find a record of Windows updates applied to your
computer?
Answer:
In the system log, in the ReportingEvents.log file and in the
WindowsUpdate.log file.
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 113
How would you apply an application control rule only to
computers in an Organizational Unit?
Answer:
Create an application control rule in a GPO and link the GPO
to the OU.
Objective:
Configuring Hardware and Applications
Item: 114
What service provides Windows backup and restore
capabilities?
Answer:
Windows Backup
Objective:
Configuring Backup and Recovery Options
Item: 115
What can you configure in Internet Explorer 8 to prevent
history, cookies, and temporary Internet files from being stored
from your recent session?
Answer:
Turn on InPrivate Browsing
Objective:
Configuring Hardware and Applications
Item: 116
What file system types are supported on Windows 7?
Answer:
FAT, FAT32, ExFAT, and NTFS
Objective:
Deploying Windows 7
Item: 117
How do you save credentials that are stored on your computer
to different media?
Answer:
Use the Back up Vault option in Credential Manager to store
credentials to another disk or location.
Objective:
Configuring Access to Resources
Item: 118
What should you install on a Windows 7 computer so that you
can manage a Windows Server 2008 or Core Edition server?
Answer:
Remote Server Administration Tools (RSAT) for Windows 7
Objective:
Configuring Access to Resources
Item: 119
VPN reconnect uses which two types of authentication via
IKEv2?
Answer:
User authentication or machine authentication
Objective:
Configuring Mobile Computing
Item: 120
What utility can you use to troubleshoot device drivers on a
Windows 7 computer?
Answer:
The Driver Verifier tool, verifier.exe
Objective:
Configuring Hardware and Applications
Item: 121
What User Account Control (UAC) setting will allow a user to
set the most secure desktop?
Answer:
the Always notify me when: option.
Objective:
Configuring Access to Resources
Item: 122
What command can you run at your computer to request an
IPv6 address from a DHCP server?
Answer:
Issue ipconfig /renew6
Objective:
Configuring Network Connectivity
Item: 123
What utility can be used to add updates to a Windows Image
Offline such as device drivers, language packs, and software
updates?
Answer:
Windows System Image Manager (SIM)
Objective:
Deploying Windows 7
Item: 124
Who has the ability to change the Windows Update settings
locally on a Windows 7 computer?
Answer:
a user in the Administrators group
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 125
Which option with ImageX allows you to specify a path other
than the %TEMP% variable to store temporary files?
Answer:
/ t emp
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 126
How can you prevent users from copying network information
to a writeable CD/DVD?
Answer:
Enable Computer Configuration\Administrative
Templates\System\Removable Storage Access\CD and
DVD: Deny write access in the local security policy or a group
policy object.
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 127
How do you turn on Windows Firewall only when you are
connecting to the Internet at a public place, such as an Internet
cafe?
Answer:
Set Turn on Windows Firewall for the Public network
location in Windows Firewall.
Objective:
Configuring Network Connectivity
Item: 128
What are two ways to add support for additional language
packs to a Windows 7 image without modifying the image?
Answer:
Use Microsoft Update to add the language pack, or add the
language pack to the Windows distribution folder.
Objective:
Configuring Hardware and Applications
Item: 129
How can you prevent users from installing their personal USB
drives on computers in the domain?
Answer:
Enable the Prevent installation of removable devices setting
in the local security policy
Objective:
Configuring Mobile Computing
Item: 130
What actions can a user remotely perform on files in a shared
folder if the user's shared permissions are Read and the user's
NTFS permissions are Full Control?
Answer:
The user can only have read access to the files.
Objective:
Configuring Access to Resources
Item: 131
If your disk fails in your Windows 7 computer, what can you
use to access the System Recovery options?
Answer:
a system recovery disk
Objective:
Configuring Backup and Recovery Options
Item: 132
What tool should you use to determine whether a legacy
application will work with Windows 7, and assess the risk of
using the application on Windows 7?
Answer:
Application Compatibility Toolkit (ACT) 5.6
Objective:
Configuring Hardware and Applications
Item: 133
How do you ensure that a program has a screen resolution of
640 x 480 every time a user runs the program?
Answer:
Set the Run in 640 x 480 screen resolution option on the
Compatibility tab of the program's Properties window
Objective:
Configuring Hardware and Applications
Item: 134
Which DISM switch can you use to install the Remote
Administration Tools on an offline Windows 7 image?
Answer:
/ Enabl e- Feat ur e
Objective:
Deploying Windows 7
Item: 135
Which wireless security type will use the encryption type of
AES without a user key?
Answer:
WPA2-Enterprise
Objective:
Configuring Network Connectivity
Item: 136
What installation option should you choose if you want your
Windows Vista laptop to keep its settings and files when you
install Windows 7?
Answer:
Upgrade
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 137
How should you specify a Windows 7 computer to pull
Windows updates from a specific WSUS server?
Answer:
Set the \Computer Configuration\Administrative
Templates\Windows Components\Windows
Update\Specify intranet Microsoft Update service location
setting in a local security policy or group policy object.
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 138
How do you delete all but the most recent system restore
point?
Answer:
Open the System applet in Control Panel. Choose the System
Protection tab, find System Restore and Shadow
Copies, select Clean Up.
Objective:
Configuring Backup and Recovery Options
Item: 139
What must you have enabled in the network properties of an
adapter on a Windows 7 client computer to use DirectAccess?
Answer:
IPv6 must be enabled and configured
Objective:
Configuring Mobile Computing
Item: 140
Which option with ImageX allows you to log all events so you
can diagnose problems?
Answer:
/ l ogf i l e
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 141
Which file is called by ScanState to control which application
settings are migrated?
Answer:
MigApp.xml
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 142
To create media that contains the discover image to be used
by non-PXE computers to receive an image from a WDS
server, what must you install?
Answer:
install the Windows Automated Installation Toolkit (AIK) to
create media that contains the discover image.
Objective:
Deploying Windows 7
Item: 143
What utilities can you use to shrink a volume?
Answer:
DiskPart issued from the command line and Disk Management
issued from the GUI
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 144
Which file should you copy to a USB device to automate the
installation of Windows 7 by booting the Windows 7 DVD?
Answer:
Autounattend.xml
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 145
How do you run a Windows Memory Diagnostic test on your
computer?
Answer:
Boot a Windows Installation disk or System Repair disk,
access the System Recovery options, and choose Windows
Memory Diagnostic
Objective:
Configuring Backup and Recovery Options
Item: 146
What ports have to open on a BranchCache client's firewall if it
is configured in Distributed Cache mode?
Answer:
TCP Port 80 and UDP port 3072
Objective:
Configuring Access to Resources
Item: 147
What is the executable file that you can use to manage a
WSUS server?
Answer:
WSUSutil.exe
Objective:
Configuring Access to Resources
Item: 148
What folder does the User State Migration Tool (USMT) use as
a source for existing documents and accounts that will be
transferred over to a new Windows 7 installation?
Answer:
\WINDOWS.OLD
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 149
What command can you type on a BranchCache client to
display the status of the client?
Answer:
net sh br anchcache show st at us al l
Objective:
Configuring Access to Resources
Item: 150
How do you allow only certain users to have a secure
connection with an application that uses TCP port 9999?
Answer:
Create a rule in Windows Firewall with Advanced Security
Objective:
Configuring Network Connectivity
Item: 151
What are three reasons why you cannot find previous versions
of a file?
Answer:
z The file may not have changed
z A backup or restore point may not have been made
since the file was changed
z System protection might not be turned on for the drive
that contains the files
Objective:
Configuring Backup and Recovery Options
Item: 152
How can you add a data recovery agent to your Windows 7
computer?
Answer:
Add the data recovery agent in Group Policy
Objective:
Configuring Access to Resources
Item: 153
When booting from a Windows 7 DVD, where will the Windows
Setup process search for a file named Autounattend.xml?
Answer:
in the root directory of all removable media, such as a USB
drive or floppy drive
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 154
What utility is used to create a Windows 7 image from a
reference computer?
Answer:
ImageX
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 155
What switch is used with slmgr.vbs to retrieve license
information and the current KMS activation count from the KMS
host?
Answer:
slmgr.vbs /dlv
Objective:
Deploying Windows 7
Item: 156
How can a user run command-line utilities such as Defrag,
Chkdsk, and IPConfig in Windows 7 with the security
credentials of a specific administrative user?
Answer:
use the RUNAS command
Objective:
Configuring Access to Resources
Item: 157
Where do you turn on presentation settings on a Windows 7
laptop?
Answer:
Open Windows Mobility Center. On the Presentation
Settings tile, click Turn on.
Objective:
Configuring Hardware and Applications
Item: 158
What type of VPN tunnel can allow an application to stay
connected to an application server even if the client's IP
address changes?
Answer:
IKEv2
Objective:
Configuring Mobile Computing
Item: 159
On which tab on the System Configuration utility should you
prevent programs from starting when you log in to your
Windows 7 computer?
Answer:
Startup
Objective:
Configuring Hardware and Applications
Item: 160
What printer permission allows a user to manage other user's
print jobs?
Answer:
Manage Documents
Objective:
Configuring Access to Resources
Item: 161
How can you revert to a previous version of a device driver in
Windows 7?
Answer:
Choose Roll Back Driver in Device Manager
Objective:
Configuring Backup and Recovery Options
Item: 162
How many partitions do you need on a portable computer
running Windows 7 to support BitLocker encryption of the
Answer:
at least two partitions
volume that contains the Windows operating system?
Objective:
Configuring Mobile Computing
Item: 163
What should you do to get a program to work in Windows 7 if
the program worked in a previous version of the Windows
operating system?
Answer:
Set the compatibility mode for the appropriate operating
system for the program on the Compatibility tab of the
program's Properties window.
Objective:
Configuring Hardware and Applications
Item: 164
If your computer is running Windows XP, then what operating
system should you upgrade to before upgrading to Windows 7?
Answer:
Windows Vista SP1
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 165
What BCDedit command sets the maximum time to 5 seconds
for a user to select an operating system from the boot menu
list?
Answer:
bcdedi t / t i meout 5
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 166
How can Windows 7 computers be added to a homegroup?
Answer:
Open HomeGroup in Control Panel and type in the password
for the homegroup
Objective:
Configuring Access to Resources
Item: 167
Why should you not back up files to another volume on the
same physical disk?
Answer:
If the disk fails, you lose the volume that contains your backup
Objective:
Configuring Backup and Recovery Options
Item: 168
Which power plan has the Turn the display off setting
configured for 10 minutes?
Answer:
Balanced
Objective:
Configuring Mobile Computing
Item: 169
What BCDedit command will display a legacy operating system
such as Windows XP as the default option on the boot menu
list?
Answer:
bcdedi t / di spl ayor der {nt l dr } / addf i r st
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 170
What two utilities can you use to export IPSec settings and
firewall rules to another computer?
Answer:
Windows Advanced Firewall and the Netsh AdvFirewall
command
Objective:
Configuring Network Connectivity
Item: 171
What policy should you enable in a GPO to audit each instance
of a user exercising a user right?
Answer:
Enable Audit privilege use access under Audit Policy
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 172
What feature in Windows 7 automatically changes your default
printer when you change networks?
Answer:
Location-aware printing
Objective:
Configuring Network Connectivity
Item: 173
What is the benefit of using Windows Anytime Upgrade?
Answer:
You can upgrade from a Windows 7 edition to another
Windows 7 edition in a few minutes by purchasing an upgrade
key because the software that you need is preinstalled with
Windows 7.
Objective:
Deploying Windows 7
Item: 174
How can you prevent users from copying network information
to a USB device that is not encrypted?
Answer:
Enable the Deny write access to drives not protected by
BitLocker setting located in Computer
Configuration\Administrative Templates\Windows
Components\BitLocker Drive Encryption\Removable Data
Drives in the local security policy or a group policy object.
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 175
What feature of Windows 7 Enterprise and Ultimate editions
allows you to encrypt a USB device?
Answer:
BitLocker to Go
Objective:
Configuring Mobile Computing
Item: 176
What command-line utility can you use to create a VHD?
Answer:
DiskPart
Objective:
Deploying Windows 7
Item: 177
What type of migration is used run ScanState on a source
computer and LoadState on a destination computer?
Answer:
Side-by-Side Migration
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 178 Answer:
Where can you remove a recent program that has been
installed on a Windows 7 computer?
Control Panel > Programs and Features
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 179
What prefix is used by IPv6 for a global unicast address?
Answer:
2000::/3
Objective:
Configuring Network Connectivity
Item: 180
What script from the Windows Automated Installation Kit is
used to split Setup files, including Windows image (.wim) files,
into individual parts that you can later burn onto multiple CD-
ROMs for installation on a computer that lacks a DVD drive?
Answer:
createspannedshares.cmd
Objective:
Deploying Windows 7
Item: 181
What type of AppLocker rule would you apply to restrict users
to running a specific version of a program?
Answer:
File Hash rule
Objective:
Configuring Hardware and Applications
Item: 182
When performing an upgrade, why would you use the User
State Migration Tool (USMT) instead of the Easy Transfer
Wizard to transfer files?
Answer:
You would use USMT to transfer accounts and files from the
\WINDOWS.OLD directory after you have installed Windows 7
on the computer.
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 183
Why would you get an access denied message when you try to
open an encrypted file?
Answer:
the key that was used to encrypt the file is probably not on your
computer
Objective:
Configuring Access to Resources
Item: 184
What sequence of commands in DiskPart will allow you to
remove an existing .vhd file as a disk in Windows 7?
Answer:
SELECT VDI SK FI LE=" FI LE NAME"
DETACH VDI SK
Objective:
Deploying Windows 7
Item: 185
How do you know if your web browser is using InPrivate
Browsing?
Answer:
It will display InPrivate on the address bar.
Objective:
Configuring Hardware and Applications
Item: 186 Answer:
What must you specify in an inbound rule in Windows Firewall
with Advanced Security to set Only allow connections from
these users?
You must set Allow only secure connections.
Objective:
Configuring Network Connectivity
Item: 187
What service pack must be installed on a Windows Vista
computer before upgrading to Windows 7?
Answer:
at least Service Pack 1
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 188
What is the path in a GPO to the Windows Support Advanced
Audit Policy Configuration?
Answer:
Computer Configuration\Windows Settings\Security
Settings\Advanced Audit Policy Configuration
Objective:
Configuring Mobile Computing
Item: 189
What possible IP address will a Windows 7 computer have if
you install it on a network with no DHCP server?
Answer:
169.254.0.1 to 169.254.255.254
Objective:
Configuring Network Connectivity
Item: 190
Which Sysprep switch would you use to prepare the computer
for delivery to the customer?
Answer:
/ oobe
Objective:
Deploying Windows 7
Item: 191
What must you do to allow single sign-on (SSO) for a Web site
in Credential Manager?
Answer:
Add the URL of the Web site with your username and
password
Objective:
Configuring Access to Resources
Item: 192
What utility can you use to enable a feature on an offline
image?
Answer:
DISM
Objective:
Deploying Windows 7
Item: 193
How can you prevent users from copying network information
to a USB device?
Answer:
Enable Computer Configuration\Administrative
Templates\System\Removable Storage Access\All
Removable Storage classes:Deny all access in the local
security policy or a group policy object.
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 194
What utility can you use to configure an IPv6 address of a
computer from a script?
Answer:
netsh
Objective:
Configuring Network Connectivity
Item: 195
Which file is called by ScanState to identify which user folders,
files, file types, and desktop settings are migrated?
Answer:
MigUser.xml
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 196
How can you have a non-PXE enabled client connect to a
Windows Deployment Services (WDS) server and install a
Windows 7 image?
Answer:
Use a Discover Boot Image to boot the client
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 197
How can you arrange different images for different OUs on
your Windows Deployment Server?
Answer:
Create Image Groups
Objective:
Deploying Windows 7
Item: 198
What setting in a GPO should you set to encrypt files on a
Windows 7 computer?
Answer:
Enable the Encrypt the Offline Files cache setting under the
Computer Configuration\Policies\Administrative
Templates\Network\Offline files
Objective:
Configuring Mobile Computing
Item: 199
What utility is used to apply a Windows 7 image to a
computer?
Answer:
ImageX
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 200
What netsh command can be used to allow a Windows 7
computer that uses DirectAccess as a client to a Teredo
server?
Answer:
net sh i nt er f ace i pv6 set t er edo
ent er pr i secl i ent <DNS name or I Pv4 addr ess of
Ser ver >
Objective:
Configuring Mobile Computing
Item: 201
How should you fix the error Boot mgr i s mi ssi ng pr ess
CTRL- ALT- DEL?
Answer:
Boot a Windows Installation disk or System Repair disk,
access the System Recovery options, and choose Startup
Repair
Objective:
Configuring Backup and Recovery Options
Item: 202
Which ScanState parameter should you use to copy encrypted
files?
Answer:
/ ef s: copyr aw
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 203
What should you do to move a certificate from one computer to
a new computer running Windows 7?
Answer:
Export the certificate from the source computer and import the
certificate to the computer running Windows 7.
Objective:
Configuring Hardware and Applications
Item: 204
What command-line command will defrag all volumes on your
computer and show defragmentation statistics?
Answer:
Def r ag / C / V
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 205
Where should you store credentials that you have backed up
from Credential Manager?
Answer:
on removable media
Objective:
Configuring Access to Resources
Item: 206
What should you use to remove a credential for a user named
Pat after you used the RUNAS command with Pat's account?
Answer:
Use Credential Manager
Objective:
Configuring Access to Resources
Item: 207
How do you delete all system restore points?
Answer:
On the System Protection tab of the system Properties menu
choose Configure and then choose Delete
Objective:
Configuring Backup and Recovery Options
Item: 208
How do you revert to the last known good configuration of your
computer with Windows 7?
Answer:
Press [F8] on start up.
Objective:
Configuring Backup and Recovery Options
Item: 209
What three things must you do to enable BranchCache on
client computers?
Answer:
1. Turn on BranchCache
2. Enable either Hosted Cache mode or Distributed Cache
mode
3. Configure the client firewall to enable BranchCache
protocols
Objective:
Configuring Access to Resources
Item: 210
When BitLocker is used with data drives, which file systems
can the drive be formatted with?
Answer:
exFAT, FAT16, FAT32, or NTFS file systems
Objective:
Configuring Mobile Computing
Item: 211
What service must be started before attempting a backup in
Windows 7?
Answer:
Task Scheduler service
Objective:
Configuring Backup and Recovery Options
Item: 212
To which drive should you back up files and directories from a
Windows 7 computer?
Answer:
On a separate external drive
Objective:
Configuring Backup and Recovery Options
Item: 213
Which RAID level provides fault tolerance and improves read
access?
Answer:
RAID-5
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 214
What directory contains a previous version of a Windows
operating system after a custom installation?
Answer:
the \Windows.old directory
Objective:
Deploying Windows 7
Item: 215
How can you prevent web content providers from collecting
information from your web browser on a Windows 7 computer?
Answer:
Configure InPrivate Filtering
Objective:
Configuring Hardware and Applications
Item: 216
In a wipe-and-load migration, at what point do you install
Microsoft Office 2007 or any proprietary applications on the
destination computer?
Answer:
After you have installed the Windows operating system and
before you run LoadState.
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 217
What utility would you use to apply an image to a VHD?
Answer:
ImageX
Objective:
Deploying Windows 7
Item: 218
Why does voice application stay connected when you change
access points using an IKEv2 tunnel with VPN Reconnect?
Answer:
VPN Reconnect maintains the client internal IP address so that
it stays the same even if the Origin address changes
Objective:
Configuring Mobile Computing
Item: 219
How do you block Windows Media Player Network Sharing
Service on employees' portable computers while used in
the office and allow the Service when the computers are
used outside of the office?
Answer:
Use Windows Firewall to block the Windows Media Player
Network Sharing Service on the Home/Work network profile,
and allow the service on the Public network profile.
Objective:
Configuring Network Connectivity
Item: 220
What command can be used to run command line command
remotely on another computer from your Windows 7 computer?
Answer:
winrm
Objective:
Configuring Access to Resources
Item: 221
What utility can be used to update an answer file and validate
the settings of the file against the .wim file?
Answer:
Windows System Image Manager (SIM)
Objective:
Deploying Windows 7
Item: 222
In order to use the WinRM listener on a Windows Vista,
Windows 7, or Windows Server 2008 computer, what must be
configured on the computer?
Answer:
An exception for the WinRM service on the appropriate
network connection type
Objective:
Configuring Network Connectivity
Item: 223
What PowerShell command is used to copy a file?
Answer:
Copy- I t em
Objective:
Configuring Network Connectivity
Item: 224
Which operating systems support Windows Support Advanced
Audit Policy Configuration?
Answer:
Windows 7 and Windows Server 2008 R2
Objective:
Configuring Mobile Computing
Item: 225
What hotkey sequence will open task manager?
Answer:
Ctrl+Shift+Esc
Objective:
Deploying Windows 7
Item: 226
How do you delete a VHD in the Disk Management snap-in?
Answer:
Right-click the disk and choose Detach VHD.
Objective:
Deploying Windows 7
Item: 227
How can you easily create an IPsec tunneling rule between two
Windows 7 computers?
Answer:
Create a Connection Security Rule in Windows Firewall with
Advanced Security
Objective:
Configuring Network Connectivity
Item: 228
What command-line utility can you use to reduce the space
that shadow copies take up on a disk?
Answer:
VSSAdmin
Objective:
Configuring Backup and Recovery Options
Item: 229
What utility would you use to add a driver to an offline Windows
PE image?
Answer:
PEImg.exe
Objective:
Deploying Windows 7
Item: 230
Before you can synchronize information between a Windows
Mobile 6.1 device and your computer, what must you establish
between the device and the computer?
Answer:
Windows Mobile partnership
Objective:
Configuring Mobile Computing
Item: 231
How do you give an individual user the ability to back up files,
but not to restore them?
Answer:
Give the user the right to Back up files and directories in a
local security policy or Group Policy
Objective:
Configuring Backup and Recovery Options
Item: 232
When should you choose Custom in the Installation options
when performing a Windows 7 installation?
Answer:
When you do not want to keep your existing files, settings, and
programs
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 233
What option should you select in the System Recovery
Answer:
System Image Recovery
options to restore personal data after booting with a system
repair disc?
Objective:
Configuring Backup and Recovery Options
Item: 234
Why would you receive the following error when attempting to
edit the HOSTS file?
Access t o C: \ Wi ndows\ Syst em32\ dr i ver s\ et c\
host s was deni ed
Answer:
You must open the Notepad application with the permissions of
an administrator
Objective:
Configuring Access to Resources
Item: 235
What GPO policy setting can be used to allow a Windows 7
computer that uses DirectAccess as a client to a Teredo
server?
Answer:
Computer Configuration| Policies\ Administrative
Templates\ Network\ TCPIP Settings\ Ipv6 transition
Technologies\ Teredo State=Enterprise Client
Objective:
Configuring Mobile Computing
Item: 236
What type of client boots to the network to connect to a
Windows Deployment Services (WDS) server and install a
Windows 7 image?
Answer:
PXE-enabled clients
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 237
How do you allow a computer running Windows 7 to
communicate with another server on the same subnet after you
have changed the IP address of the server?
Answer:
run ipconfig /flushdns on the computer
Objective:
Configuring Network Connectivity
Item: 238
What command is used to produce the Power Efficiency
Diagnostic Report report?
Answer:
Power Cf g - Ener gy
Objective:
Configuring Mobile Computing
Item: 239
How can you create another volume on a partition on a disk
that contains volumes and no leftover space?
Answer:
Shrink a volume to free up space and create a partition.
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 240
What utility would you use to add a driver to a booted Windows
PE image?
Answer:
Drvload.exe
Objective:
Deploying Windows 7
Item: 241
Besides the Administrators group, what local group on a
Windows 7 computer has the ability to restore files?
Answer:
the Backup Operators group
Objective:
Configuring Backup and Recovery Options
Item: 242
What must you do to open an encrypted file that was
transferred from another computer?
Answer:
Export the EFS certificate from the source computer and import
the EFS certificate to the target computer
Objective:
Configuring Access to Resources
Item: 243
To have the highest data transfer performance possible, what
should you configure on the properties of the device?
Answer:
Configure Enable write caching on the device and Turn off
Windows write-cache buffer flushing on the device
Objective:
Monitoring and Maintaining Systems that Run Windows 7
Item: 244
What file on the Windows 7 DVD is used to start the Easy
Transfer Wizard?
Answer:
The migsetup.exe file in the \Support\Migwiz directory DVD
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 245
What must you configure on a client to allow the client to use
applications on a Remote Desktop Web Access server in a
remote location?
Answer:
The connection URL in the RemoteApp and Desktop
Connections applet in Control Panel
Objective:
Configuring Mobile Computing
Item: 246
Which Sysprep switch enables you to automate the mini-setup
wizard so the computer name and other information can
automatically be prepared?
Answer:
/ unat t end
Objective:
Deploying Windows 7
Item: 247
What switch is used with the PING command to allow you to
ping a computer by its IPv6 address?
Answer:
ping -6
Objective:
Configuring Network Connectivity
Item: 248
What must be turned on to view, copy, or restore previous
versions of files?
Answer:
System Protection must be turned on
Objective:
Configuring Backup and Recovery Options
Item: 249
What must you do if you want to install Windows 7 from a VHD
on a new disk installed in a computer?
Answer:
Set the disk partition to Active
Objective:
Deploying Windows 7
Item: 250
What should you use to validate an answer file for a Windows
7 installation that you have manually authored?
Answer:
Windows System Image Manager (SIM)
Objective:
Deploying Windows 7
Item: 251
How can you connect from the command line to a wireless
network with the SSID verigon and a profile named profile1?
Answer:
net sh wl an connect ssi d=" Ver i gon"
name=Pr of i l e1 i nt er f ace=" Wi r el ess Net wor k
Connect i on"
Objective:
Configuring Network Connectivity
Item: 252
What Deployment Image Servicing and Management (DISM)
switch can be used to add a product key to a Windows 7
image?
Answer:
/ Set - Pr oduct Key
Objective:
Deploying Windows 7
Item: 253
What are the four VPN tunnel types supported by Windows 7?
Answer:
PPTP, L2TP/IPSec, SSTP, and IKEv2
Objective:
Configuring Mobile Computing
Item: 254
Which ScanState parameter should you use to ensure that the
migration store is encrypted?
Answer:
/ encr ypt
Objective:
Installing, Upgrading, and Migrating to Windows 7
Item: 255
How would you run an executable as another user through
Windows Explorer?
Answer:
Hold the [Shift] key down, right-click the mouse and choose
Run As Different User
Objective:
Configuring Access to Resources
Item: 256
To ensure that your default printer changes when you change
networks, what should you configure in Devices and Printers?
Answer:
set Change my default printer when I change networks
Objective:
Configuring Network Connectivity
Item: 257
What type of IPv6 address is used to send packets in the local
subnet?
Answer:
Link-local addresses
Objective:
Configuring Network Connectivity
Item: 258
What must you have on your computer to use BitLocker to
encrypt the volume that contains the Windows operating
system files?
Answer:
Support for a bootable USB device or Trusted Platform Module
version 1.2, or later
Objective:
Configuring Mobile Computing
Item: 259
How can you have additional people view, execute, or modify
an encrypted file on a computer?
Answer:
Add an encryption certificate and key to the file.
Objective:
Configuring Access to Resources
Item: 260
Which wireless security type will use the encryption type of
AES but must use a user key?
Answer:
WPA2-Personal
Objective:
Configuring Network Connectivity
Item: 261
What sequence of commands in DiskPart will allow you to add
an existing .vhd file as a disk in Windows 7?
Answer:
SELECT VDI SK FI LE=" FI LE NAME"
ATTACH VDI SK
Objective:
Deploying Windows 7
Item: 262
Which Windows 7 edition will allow to you to switch the user
interface between any of 35 languages?
Answer:
Windows 7 Ultimate
Objective:
Configuring Hardware and Applications
Item: 263
What operating systems can support BranchCache?
Answer:
The Enterprise edition and Ultimate edition of Windows 7 and
Windows Server 2008 R2
Objective:
Configuring Access to Resources

Вам также может понравиться