Hold a Bachelors of Telecom/Electrical/Computer Engineering Have 4-6 years of relevant experience Be specialized in the area of Radio and BSS Coverage Planning/Optimization Job Description Responsible for the Planning of coverage on new locations as per marketing/sales Coverage planning for new location using Planning Tool Asset, Rollout (coverage, capacity and IBS) Create of Radio Technical Document in view of desired coverage objectives , EiRP, HBA, Azimuth ,Tilts Enhanced existing coverage by introduction of new features ,trails like Air combining ,enabling coverage-mode design Physical redesigns for coverage and quality improvement JVs with rollout departments to identify suitable candidate for site (Coverage + Capacity) Candidate Evaluation with all stake holders and updating after JV Manage Roof clearance calculations, Civil Aviation Authority Funnel Zone Calculation Conduct Site Audit of new sites Generate Daily stats monitoring of new site & check for hardware issues until the site is handed to optimization. Responsible for Design of site on building analysis and Drive test of newly commissioned site Walk test of newly commissioned micro site and antenna extension of old IBS Parameter optimization of site in order to nullify spillage of indoor site to outdoors for uniform serving of site inside the building Manage reporting of Hardware issues on new sites and resolve major KPIs degradation on new sites IBS Planning and deployment as per plan Drawing the RF schematic in MS Visio Support and coordinate Sales Tech JVs with Marketing/Sales rep. to identify coverage locations Site Audit of new sites Walk test to analyse Rx level on each floor by the help of TEMS and mark the signal levels on Neighbour plan addition/deletion for new sites Reparenting, migration activities management LAC pps monitoring and take appropriate actions accordingly Essential Skills Working experience in asset, Drive testing and Planning tools Desirable Skills RF planning , GPRS, EDGE, BSC dimensioning and drive testing with Nemo