Академический Документы
Профессиональный Документы
Культура Документы
5.your systems perfomance down, u find out cpu bottel neck which command shows cpu
resoures pocesses
Ans: ps aux
7. you have /test file system, you want unmount file system /test but not unmount which
command shows how much process on this file systems
Ans: fuser
11. your system is working ok, but when u restart the system your led show 554 what to do
frist.
Ans: Reboot in Maintenance mode, Access the rootvg before mounting rootvg, then run fsck
12. you have 5.1 mksysb backup. You want to install in another systems which component
require for install mksysb .
Ans:Boot through CDROM
13. You have 5.1 os on your machine u want to upgrade 5.2 which is the fastest method to
revert back
Ans: alt_disk_install
14. you want to upgrade os 5.1 to 5.2 and u want to your old user,lv and all ,which process save
your existing user and user lv
1
Ans: Migration installation
15. you have 4mm backup on tape ,and your system have 8 mm tape one more system have
4mm and 8mm tape what command convert 4mm tape in to 8 mm tape
Ans: tcopy
16. you mirrord hdisk0 and hdisk1 hard disk if you want test if your harddisk 0 fail mc boot
from hdisk1.
Ans: b)
17. you install new ethernet card and system reboot while booting you see your ethernet card
was not configured which log file shows error.
Ans: alog –t boot -o
18. you create one filesystem / test and also create one log lv /log00 but when you mount your
test filesystem not mount ,test file system logvolume is /log00 which command use for
mounting a file system /test.
Ans: logform
19 You have rootvg and datavg volume group u want t take backup of datavg which command
use for backup datavg.
Ans: savevg
20. You have 32 bit enable kernal, if you want to run your 64 bit application on machine which
proc. use enable your 64bit kernal.
Ans: ln –sf /usr/lib/boot/unix _64 /unix
Ln –sf /usr/lib/boot/unix_64 /usr/lib/boot/unix
Bosboot –ad /dev/ipldsvice
Shutdown –r
21.You create one user and u want give rights to manage user which group given to that user
for manage other user
Ans: Security
22. your login count finished which command use for counting given again.
Ans: chsec
2
26. What containes the proc directory?
Ans: Binary value of processes / current state of kernel
35. How will list mounted files sytems accross the disks?
Ans: mount
36. Which command will you check the system errlog file?
Ans: errpt –a
39. An owner of a pSeries 680 would like to install AIX 5L and use JFS2 for the rootvg file
systems. Which of the following methods are available to perform this task?
ANS: Select the Enable 64-bit Kernel and JFS2 advanced install option at installation time.
40. How to exclude a file while taking mksys backup?
Ans: add entry of files in /etc/exclude.rootvg which are to be exclude and use –e option with
mksysb command
3
Ans: lsslot -c pci –a
42. A system administrator wishes to determine if a newly configured tape drive is correctly
added to the ODM database. Which command would the administrator use?
ANS: odmget
44. How to copy lv's from the failed disk? Assume that the hdisk is failed.
Ans: cplv –-v myvg –-y newlv oldlv
55.A user is not able to cd to the /tmp/application dir what could be the problem
drw_r__r__ 4 root system /tmp/application.
Ans. Executable rights to the dir are not their.
4
57.In which file u will start miscellaneous applications during system boot.
Ans: rc.local
60.A Logical vol is increased and how to know how many blocks to be added to increase the
FS.
Ans: lslv lvname
61.Which file will show kernel parameter changes done during last reboot.
Ans. /etc/tunables/lastboot
64.To verify that all filesets have all required requisites and are completely
installed.
Ans: lppchk –v
67. In iostat report how you will know that the System is i/o bound
Ans: %iowait > 25% or %tm_act > 70%
69: How to lists specific hardware information e.g. EC level,FRUno. Port no.
Ans: lscfg -v
5
70. How to see the information about all of the PVs within the Volume group
Ans: lsvg –p rootvg ( for logical volumes information use –l)
72. Give the command used to redistribute the PPs of the LVs in Volume group according to
their preferred allocation ploicies
Ans: reorgvg vgname OR reorgvg vgname lvname1 lvname 2..
73: Command to list all the LVs on a PV including number of LPs, PPs and distribution on
the disk
Ans: lspv –l hdiskn
74.Command to list all the LVs on a disk and the PP to which its LPs are mapped .It is listed in
PP order and shows what partitions are free and which are used, as well as the location.
Ans: lspv –p hdiskn
75. Command to move the contents of the Physical Volume OR to move LVs from one PV to
another
Ans: migratepv –l lvname sourcehdiskn targethdiskn
76. After making changes in /etc/tunables/nextboot, what is the next step to save it?
Ans: savetune
77. Where will be the freewares like zip, gunip etc will reside. (It was asking for path)
Ans. Please check it might be /opt/freeware
78. shell 1
VAR1=’dog’
VAR2=’cat’
Export VAR1
Export VAR2
6
VAR1=’mouse’
Shell2
#!usr/bin/ksh
VAR2=’fish’
Print $VAR1 & $VAR2“
What is the result
Ans: fish mouse
79. Where you will enter the scripts to be run at the boot time
Ans: rc.boot
82. There are 5 harddisks of 80GB and data is 300 GB, How you will provide fault tolerance as
well as data storage.
Ans: RAID-5