Вы находитесь на странице: 1из 13

ECO-CR-1000

Tire Recycling System


ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
1 of 13
ECO Shredding Process
ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
2 of 13
ECO 137 TS Shredder
ECO Greens two-shaft shredders
are designed with an aggressive
low RPM, high torque shredding
technology. The shredder blade
thickness ranges from 25 mm to
152 mm(1-6) depending on the
type of tires, throughput, and
desired end product.
ECO 1200 Grater
The ECO 1200 Grater is the
ultimate machine for mid-stream
grinding and steel separation. It is
specically designed to take pre-
shredded tire chips and produce
between 44-16 mm(1.75and
0.625) wire free rubber chips.
ECO G2 Granulator
The ECO Granulators are designed
to grind the rubber mulch from the
Grater into small granules from
4-20 mesh. The granules are
screened and re-circulated until the
desired size is reached. During the
granulation process, 99% of the
ber is removed, leaving a
contaminant free crumb rubber
granulate.
Scope of Project
ECO Greens CR-1000 tire recycling system is proven to turn whole scrap tires into high quality,
uncontaminated crumb rubber. It is uniquely designed to allow the customer to adjust the
equipment screens for precise sizing control and exibility for output sizes. Our crumb rubber
systems also utilize a variety of conveying and separation technologies to minimize product
losses, maximize e!ciency, and maintain a clean operating environment.
Input Requirements
Car and Truck
All tires should be free of foreign such as stones, ammable uids, etc.
De-beading of the tire is not required prior to processing
Maximum steel content by weight is 30%
Maximum textile content by weight is 15%
Minimum rubber by weight is 55-60%
Input Capacity
Up to 1 ton per hour
Available Output Products and Size Range
Tire Derived Fuel Chips - Size Range is 25-150 mm - Removed after the Shredder.
Wire free Rubber Chip- Size range is 16-44 mm - Removed after the Grater.
Crumb Rubber - Size Range is 4-20 mesh (6-1 mm) - Removed after the Granulators.
Fine Powder - Size Range is 0-1 mm - Removed after the Grater and Granulators.
Steel.
Textiles.
The system produces black granules with almost no visual impurities such as textiles,
steel, etc.

ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
3 of 13
Crumb Rubber Purity
99% Free of Textile
99% Free of Steel
99% Free of Stones and other contaminants

Power
Total KW: 417 - 476 KW
Voltage Options: 3 phase 440V / 380V
Hertz: 60Hz / 50Hz
Estimated Consumption per hour: 250 - 280 Kwh
Required amperage for the system: 1,115 - 1,227 Amps
Building Recommendations
Plant Dimensions L x W x H:* 40,000 x 7,000 x 6,500 mm
Recommended Warehouse Size:** 1,400 Sq Meters (15,000 Sq Ft)
Concrete pad thickness:*** Under ECO Shredder - 400 mm
Under ECO Grater - 400 mm
Under ECO Granulators - 200 mm
Under ECO Classiers - 150 mm
*Dimensions are estimates only. All nal dimensions will be determined at the time of
nal drawings.
**Warehouse size does not include space for any storage or o!ce space.
***Foundations for the machines should be done as islands of reinforced concrete and
not as part of the building.
Recommended Operators
This plant will need 4 to 5 people per shift to operate
1 Mechanic
3-5 Material handlers
ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
4 of 13
Maintenance and Wear Costs
ECO Shredder - Allow for 20 minutes of maintenance for every 8 hours of run time.
Grater-Allow for 60 minutes of maintenance for every 8 hours of run time.
Granulators-Allow for 20 minutes of maintenance for every 8 hours of run time.
Maintenance tasks include but are not limited to: tightening bolts, greasing, adding
and changing lubrication, tightening blades, adjusting blade tolerances, changing
blades, changing screens, belt drive adjustment, cleanup of material buildup, etc.
Wear costs for this plant are estimated between $15-$18 USD per ton.
Duration of ECO-137 shredder blades before sharpening is up to 400,000 PTE
(Passenger Tire Equivalent). Blades can be resharpened up to 10 times.
Duration of ECO-1200 grater blades before sharpening is up to 200,000 PTE
(Passenger Tire Equivalent). Blades can be rotated at up to 100,000 PTE. Blades can be
resharpened up to 4 times.
Duration of ECO-G2 blades before sharpening is up to 150,000 PTE (Passenger Tire
Equivalent). Blades can be resharpened up to 6 times.
Buyer is Responsible for the following
Any custom duties, fees, taxes, etc are to be paid directly by buyer
Freight
Installation
Electrical power, cables, and wiring to the control panel
Building or land to house the system
Source of water (Minimum 3 bar)
Any Permits required
Any auxiliary equipment not listed on ECO Greens equipment list
Environmental Compliance
There are no harmful pollutants generated or released in the recycling process. All ber
or rubber build up outside of the equipment can be disposed.
ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
5 of 13
Installation and Supervision
ECO Green Equipment will provide an installation technician for up to 30 working days
to supervise the installation process. The technician will assist your installation team in
setting everything up. Any additional supervision required as a result of performance by
the buyer will be the responsibility of the Purchaser. This includes but is not limited to
ights, hotels, car rental and forty ($40.00) dollars USD per diem for food per person.
The hourly rate is One Hundred Ten ($110.00) dollars USD per hour per person. Travel
time rate is Seventy-Five ($75.00) dollars USD per hour per person.
Training
ECO Green Equipment will provide a training technician for up to 10 working days after
the installation process. Any additional training requested will be the responsibility of
the Purchaser. This includes but is not limited to ights, hotels, car rental and forty
($40.00) dollars USD per diem for food per person. The hourly rate is One Hundred Ten
($110.00) dollars USD per hour per person. Travel time rate is Seventy-Five ($75.00)
dollars USD per hour per person.
Shipping
The equipment ships in 20', 40', and 40' HQ containers. This plant will require 12 to 14
containers depending on the nal design of the plant.
Condentiality
This proposal and all of its contents, including but not limited to layouts, descriptions, machine
information, etc. are for the exclusive use of person and/or company for whom this quote is prepared.
This quote contains proprietary information and technical details the sole property of which belong to
ECO Green Equipment. No release or disclosure of the technical or pricing information shall be released
to any party without prior written consent from ECO Green Equipment. ECO Green reserves the right to
prosecute to the fullest anyone who violates this condentiality.
ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
6 of 13
*Drawing displayed is representational. Actual plant and equipment layout may differ as shown. Consult with
your ECO Green Equipment representative for actual plant drawings and facility layout plan.
ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
7 of 13
List & Price
# Item Qty Description Description
1 C-137TS-IF 1 In-feed conveyor. 5.5 KW Siemens motor. Rubber belt with v tread.
Width of the conveyor is 1400 mm.
In-feed conveyor. 5.5 KW Siemens motor. Rubber belt with v tread.
Width of the conveyor is 1400 mm.
2 ECO-137-TS 1 Two Shaft Shredder with two 60 KW electric drive Siemens motors,
Boneg gearbox, heat treated cutters and shafts for extended life of the
cutting chamber. Cutting chamber dimensions 1604 x 858 mm. Split
chamber for recirculation
Two Shaft Shredder with two 60 KW electric drive Siemens motors,
Boneg gearbox, heat treated cutters and shafts for extended life of the
cutting chamber. Cutting chamber dimensions 1604 x 858 mm. Split
chamber for recirculation
3 C-137TS-DC 1 Discharge conveyor. 3.5 KW Siemens motor. Rubber belt with block
tread. Width of the conveyor is 1200 mm.
Discharge conveyor. 3.5 KW Siemens motor. Rubber belt with block
tread. Width of the conveyor is 1200 mm.
4 DCS-137TS 1 Disc Screen Classier that separates 3 inch minus. 5.5 KW Siemens
motor. Chain driven.
Disc Screen Classier that separates 3 inch minus. 5.5 KW Siemens
motor. Chain driven.
5 C-137TS-RC 1 Re-circulation conveyor. 3.5 KW Siemens motor. Rubber belt with block
tread. Width of the conveyor is 1000 mm.
Re-circulation conveyor. 3.5 KW Siemens motor. Rubber belt with block
tread. Width of the conveyor is 1000 mm.
6 C-1200G-IF 1 In-feed conveyor. 3.5 KW Siemens motor. Rubber belt with block tread.
Width of the conveyor is 800 mm.
In-feed conveyor. 3.5 KW Siemens motor. Rubber belt with block tread.
Width of the conveyor is 800 mm.
7 ECO-1200-G 1 ECO Grater 1250 is a single shaft shredder powered by 132 KW
Siemens Motor. Adjustable screen gives you the ability to produce
between 16-44 mm wire free rubber chips. Cutting chamber is 1200 x
742 mm.
ECO Grater 1250 is a single shaft shredder powered by 132 KW
Siemens Motor. Adjustable screen gives you the ability to produce
between 16-44 mm wire free rubber chips. Cutting chamber is 1200 x
742 mm.
8 VTS-1200-G 1 Vibratory conveyor with screen. Screen separates 4 mm minus. Driven
by two 3.5 KW vibratory Motors.
Vibratory conveyor with screen. Screen separates 4 mm minus. Driven
by two 3.5 KW vibratory Motors.
9 MGC-SML-G 1 Magnet with belt conveyor for removal of separated steel. Driven by 2
Kw motor.
Magnet with belt conveyor for removal of separated steel. Driven by 2
Kw motor.
10 AG-BD-IF 1 Augers, G1s, zigzag classier, screen 3.5 KW Siemens motor. Augers, G1s, zigzag classier, screen 3.5 KW Siemens motor.
11 AG-G/KB-IF 2 Auger Auger
ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
8 of 13
12 ECO-G2-AG 2 ECO Granulator produces 7 mm to 1 mm crumb rubber. Size adjusted
by replacing the screen. Siemens Motor is 110 KW. Cutting chamber is
1200 x 742
ECO Granulator produces 7 mm to 1 mm crumb rubber. Size adjusted
by replacing the screen. Siemens Motor is 110 KW. Cutting chamber is
1200 x 742
13 VTS-FBR-1000 2 Fiber Separation Table Fiber Separation Table
14 PNC-1000 7 Blower/Cyclone/Valve Pneumatic conveyors for the transportation of
crumb rubber. Blower, cyclone and rotary valve. Siemens Motors
Blower/Cyclone/Valve Pneumatic conveyors for the transportation of
crumb rubber. Blower, cyclone and rotary valve. Siemens Motors
15 MGD-1000 1 Drum magnet for nal steel removal. 1.8 Kw motor. Drum magnet for nal steel removal. 1.8 Kw motor.
16 SSC-1000 1 Vibratory screen for separation of different size particles. Screens up to
3 different sized particles.
Vibratory screen for separation of different size particles. Screens up to
3 different sized particles.
17 ZZ-1000-CLS 2 Zig Zag Classier Zig Zag Classier
18 DRS-1000-CR 1 High Pressure Central Blower dust removal lter and ber discharge. Zig
zag Classiers. 24 KW Siemens Motor
High Pressure Central Blower dust removal lter and ber discharge. Zig
zag Classiers. 24 KW Siemens Motor
19 BSS-2-BG 2 Bagging station with 2 scales and two slots for bags. Fills one bag at a
time.
Bagging station with 2 scales and two slots for bags. Fills one bag at a
time.
20 CLG-TWR 1 Cooling Tower Cooling Tower
21 BRN-CR-1000 1 Automated control panel to operate the plant. Automated control panel to operate the plant.
Total Purchase Price USD: Total Purchase Price USD: Total Purchase Price USD: Total Purchase Price USD: $1,126,620.00
Additional Available Options Additional Available Options Additional Available Options
Item Description Price
ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
9 of 13
Terms Terms
Payment Terms: 50% deposit to start the order, 50% due before shipment
Lead Time: 4-6 months from date of order placement and receipt of
deposit payment. Requires prompt return of approval
drawings if applicable.
Delivery Terms: Ex-Works Factory
Validity: Offer is valid for 30 days.
ECO Green Equipment, LLC reserves the right to alter and modify technical specications and design
without any further notice.
ECO Green Equipment, LLC reserves the right to alter and modify technical specications and design
without any further notice.
1.ACCEPTANCE - Company objects to any additional or different terms that may be contained in Purchasers purchase order.
The sale and shipment by Company of goods ordered by Purchaser shall be conclusively deemed to be subject to the terms and
conditions hereof. Company shall not be deemed to accept any additional or modified terms or conditions except by a writing
signed by Company. Companys action or failure to act shall not be deemed acceptance of any additional or modified term or
condition. Purchasers retention of this agreement, without notification of any error or nonacceptance within one (1) working day
following Purchasers receipt, shall constitute Purchasers acceptance of the terms and conditions herein.
2. WARRANTY - (a)ECO Green Equipments warrants that at the time of shipment to the buyer, all equipment was free of any
defects or damages. (b) Warranty is valid for twelve (12) months from the date of first use, based on a five (5) day work week
and an eight (8) hour work day. For example, if you run your equipment for sixteen (16) hours in one day that would be
considered two (2) days. Or eighteen (18) months from the time the first item is shipped to the buyer. Which ever occurs first.
(c)Warranty will become null and void if the machine is used in anyway improperly. Repairs and alterations to the system or
machine have been done by someone outside of ECO Green Equipments representation. Failure to complete and return ECO
Green Maintenance forms each month.(d)ECO Green Equipment only warrants items manufactured by ECO Green Equipment.
All products manufactured by other companies will fall under that companies warrantee on the product. (e)It is the responsibility
of the buyer to return the defective part to ECO Green. If the part is found to be defective the part will be replaced or repaired
and the buyer will be reimbursed for the freight. (f)ECO Green Equipment will not be responsible for any damage or losses
incurred in shipment from the factory. (g)ECO Green Equipment will not be responsible for damage or losses incurred during
operation of our machinery arising from Buyer's disregard or neglect of safety precautions necessary to insure safe operation of
our equipment. (h)ECO Green Equipment reserves the right under its product improvement policy to change construction or
design details and furnish equipment when so altered without reference to illustrations or specifications used herein. (i)ECO
Green Equipment shall in no event be liable for consequential damages or contingent liabilities arising out of failure under this or
any other warranty expressed, implied or statutory. (j)ECO Green Equipment agrees to replace or repair the defective article,
part, or machine thereof provided notice of such defect is provided in writing prior to expiration of the "WARRANTY TIME
PERIOD" as described herein, and provided said article is made available for inspection by ECO Green Equipment. The extent
of this warranty is limited to the correction of the condition, or, at ECO Green Equipment's option, to a refund of the purchase
price and return of the used machinery components to ECO Green Equipment, provided notice of such defect is received in
writing prior to this warranty expiring, and provided article is available for inspection by ECO Green Equipment. (k)ECO Green
ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
10 of 13
Equipment will not be responsible for labor costs incurred in the removal or reinstatement of defective articles or parts thereof. If
the Buyer grants a warranty on such articles or conditions of greater scope than indicated above, the Buyer will assume the
burden of such greater warranty and shall hold ECO Green Equipment harmless from any and all claims of third parties based
upon such extended warranties. (l)ECO Green Equipment does not warrant wear items, capacities of units, throughput rates of
units, or product sizing unless specifically stated in writing by ECO Green Equipment.
1.PURCHASER DATA - Timely performance by Company is contingent upon Purchaser's supplying to Company, when needed,
all required technical information, including drawing approval, payments when due, and all required commercial documentation.
2.NON-CANCELLATION - Purchaser may not cancel or terminate for convenience, or direct suspension of manufacture unless
Company agrees in writing, at which time Company may negotiate mutually agreeable termination charges.
3.DELAYS - If Company suffers delay in performance due to any cause beyond its control, including but not limited to act of God,
war, act or failure to act of government, act or omission of Purchaser, fire, flood, strike or labor trouble, sabotage, or delay in
obtaining from others suitable services, materials, components, equipment of transportation, the time of performance shall be
extended a period of time equal to the period of the delay and its consequences. Company will give the Purchaser reasonable
notice within a reasonable time after Company becomes aware of any such delay.
4.STORAGE - Any item of the product(s) on which manufacture or shipment is delayed by causes within Purchaser's control, or
by causes which affect Purchaser's ability to receive the product(s), may be placed in storage by Company at Purchaser's
expense and risk.
5.SHIPMENT - Ex-Works factory, unless other arrangements are made. Shipment can be processed by ECO Green Equipment
on behalf of the purchaser at the purchasers request and expense.
6.TITLE AND INSURANCE - Title to the product(s) and risk of loss or damage shall pass to Purchaser upon receipt of payment
in full. Purchaser grants to Company a purchase money security interest in the product(s) and proceeds and any replacement
shall remain in Company, regardless of mode of attachment to realty or other property, until the full price has been paid in cash.
Purchaser agrees to do all acts necessary to perfect and maintain said security interest, and to protect Company's interest by
adequately insuring the product(s) against loss or damage from any external cause with Company named as insured or co-
insured. Purchaser hereby authorizes Company to execute, if required, and to file any financing statements or other instruments
or documents reasonably necessary or desirable to perfect and maintain said security interest in the products and proceeds.
7.TAXES - Taxes are the responsibility of Purchaser. The prices quoted do not include any duties or sales use, excise, value-
added, or other taxes or charges, unless specifically noted on the proposal form. Purchaser agrees to indemnify and defend
Company against duties or sales use, excise, value-added, or other taxes or charges, unless specifically noted on the proposal
form.
8.GENERAL - In the event Company places this agreement in the hands of an attorney for collection of the purchase price or
other sums owing to Company from Purchaser, Purchaser agrees to pay Company's reasonable costs and expenses of
collection, including attorney's fees, whether or not any suit or action is filed and any additional costs, expenses and attorneys'
fees incurred at trial or on appeal. Purchaser consents to personal jurisdiction in Utah and venue in Salt Lake County Circuit
Court. Statements about the product(s) may have been made to Purchaser by representatives of Company. Such statements
do not constitute warranties and shall not be relied on by Purchaser and are not part of this agreement. The entire agreement is
embodied in this writing. THIS WRITING CONSTITUTES THE FINAL EXPRESSION OF THE PARTIES AGREEMENT AND IS
A COMPLETE AND EXCLUSIVE STATEMENT OF THE TERMS OF THE AGREEMENT. Company will comply with all laws
applicable to Company. Compliance with OSHA or similar federal, state or local laws during any operation or use of the
product(s) is the sole responsibility of Purchaser. Assignment may be made only with written consent of both parties.
9.LIMITATION OF LIABILITY - (a)Company is not liable for failure to fulfill its obligations due to causes beyond its control; (b)in
no event will Company be liable for any lost savings, lost profits, lost data, or other consequential on incidental damages, even if
Company has been advised of the possibility of such potential damages or for any claim against the Purchaser by any other
Party; and (c)Companys total liability to the Purchaser for damages, from any cause whatsoever, and regardless of the form of
action, whether in contract or in tort, including negligence, is limited to actual damages up to the purchase price paid for the
specific Equipment under the Agreement that caused the damages or that is the subject matter of the Agreement or is directly
related to the cause of action.
ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
11 of 13
10.STATUTES OF LIMITATION - No action, regardless of form, arising out of this Agreement may be brought by either party
more than [Eighteen (18)] months after the cause of action has arisen or, in the case for non-payment, more than [Eighteen (18)]
months from the date the last payment was due.
The forgoing is hereby accepted by Purchaser.
Signature: ___________________________________________________________________________
Printed Name: ___________________________________________________________________________

Title: __________________________________________ Date: _______________________
Eco Green Equipment, LLC
ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
12 of 13
Thank you for the opportunity to provide an equipment quotation.
We look forward to working with you.
Please contact us with any questions.
ECO GREEN EQUIPMENT
Tel: 801.505.6841 USA
sales@ecogreenequipment.com
www.ecogreenequipment.com
ECO-CR-1000
Prepared For: Juan Sebastian
Prepared By: Andres Salazar
Date: October 23, 2013
Contract Number: 1-8833-3e1690-1
13 of 13

Вам также может понравиться