It states that at any point P the magnitude of the magnetic field
intensity produced by the differential element is proportional to the product of the current, the magnitude of the differential length, and the sine of the angle lying between the filament and a line connecting the filament to the point P where the field is desired.
Law of Biot-Savart
2. The total electric potential at a point is the algebraic sum of the individual component potentials at the point. This is known as the ____________________ applied to electric potential.
Principle of Superposition
3. A usually undesirable effect that occurs when sound waves from a loud speaker reach a microphone in the same system. This can cause an amplifier to oscillate, with a resultant rumbling, howling or whistling.
Acoustic Feedback
4. AWG means?
American Wire Gauge
5. The splitting of a spectral line of a gas into closely spaced, polarized frequency components by an applied magnetic field.
Zeeman Effect
6. A frequency-sensitive bridge in which two adjacent arms are resistances and the other two adjacent arms are resistance- capacitance (RC) combinations.
Wien Bridge
7. Two dissimilar metals brought into contact will generate a difference of potential whose value is characteristic of the metals.
Voltas Principle 8. The branch of electrical communication dealing with the transmission and reception reception of sounds especially wires.
Telephony
9. The tendency of high-frequency alternating current to travel along the surface of a conductor.
Skin Effect
10. An often unintended low-resistance path through which current bypasses a component or circuit.
Short Circuit
11. A transistor circuit in which the input signal is applied to the base, and the output signal is taken from the emitter resistor.
Emitter Follower
12. The ohmic resistance of a semiconductor material.
Bulk Resistance
13. This type of diode exhibits a phenomenon known as negative resistance.
Tunnel Diode
14. The fourth harmonic of 800 kHz is?
3.20 MHz
15. The ratio of the differential gain and common gain of an op- amp.
Common-mode Rejection Ratio
16. They are special purpose DC generators, supplying large DC currents, precisely controlled to large DC motors used to drive heavy physical loads such as gun turrets and missile launchers
Amplidynes
17. What meter is used to measure insulation resistance?
Megger / Megaohmmerter
18. This is used to store most frequently used data and most recent data.
Cache Memory
19. Type of robot or machine that resembles human?
Android
20. A BJT has = 0.99, I B = 25 A, and I CBO = 200 nA. Find the dc collector current.
I C = 2.495 mA
21. Current flow in a semiconductor that is due to the applied electric field.
Drift Current
22. A silicon diode is in parallel with a germanium diode and connected to a load resistor having a value of 20kW, a forward supply voltage of 10V. What is the approximate voltage across the silicon diode?
0.03V
23. The transistor model that is best suited for high-frequency applications. It is the other term for Hybrid-Pi model.
Giacolleto Model 24. Backwards working electric motor is best described as?
Electric Generator
25. In a mesh, the algebraic sum of all voltages and voltage drops is equal to zero.
Kirchhoffs Loop Rule/ Kirchhoffs Voltage Law
26. The differential form of Gauss Law, namely, div E =
Poisson Equation
27. Electric charge taken on by contact or friction between two different materials
Triboelectricity
28. What is formed on the screen of a cathode ray oscilloscope when two sine wave voltages are simultaneously applied to the two sets of deflection plates?
Lissajous Pattern
29. In computers, what do you call a relatively small, high-speed memory that stores the most recently used instructions or data from a larger but slower main memory?