How do I model a Fluidized Bed Reactor in Aspen Plus?
Solution ID: 138526
Product(s): Aspen Plus Version(s): V8.4, V8.6 Primary subject: BPS models, Unit Operations Last Modified: 27-Nov-2013 Attached files (filesize): Fluidized bed reactor demo.zip (2138 k): Fluidized bed reactor demo Associated Solutions: ID: 138944 Application Examples: Modeling Spray Dryers and Fluidized Bed Reactors and Using Conceptual Solids Models in Aspen Plus V8.4 ID: 139960 Modeling Fluidized Bed Reactors, Dryers, and Agglomerators Problem Statement How do I model a Fluidized Bed Reactor in Aspen Plus? Solution The attached Aspen Plus V8.4 demo will show you how a fluidized bed reactor can be modeled in Aspen Plus. There is an associated PDF to guide you through the steps. This example will cover Basic description of the fluidized bed model including bottom zone and freeboard calculation methods and other capabilities Setting up the geometry and configuration of a circulating fluidized bed reactor as well as the reactions occurring in the reactor Use the out-of-the-box plots available to understand the reactions and other changes occurring in the fluidized bed reactor. AspenTech Support Center Solution 138526 10/20/2014 http://support.aspentech.com/webteamcgi/SolutionDisplay_view.cgi?key=138526 Page 1 of 2 Keywords Solids Capabilities, Unit Operations, Energy optimization, Fluidized Bed
How do you rate this solution? (Not Helpful) 1 2 3 4 5 (Very Helpful) Please add any additional comments regarding how this solution could be improved: Submit This document contains proprietary information of Aspen Technology, Inc. and is tendered subject to the condition that no copy or other reproduction be made in whole or in part for use other than customer's internal use. Access to this document is strictly limited to customers of Aspen Technology, Inc. who are registered users of the support web site; no access or further distribution to any third party, including contractors or other agents of customer, is permitted. No use may be made of information herein except for which it is transmitted, without the express prior written consent of Aspen Technology, Inc. Aspen Technology may provide information regarding possible future product developments including new products, product features, product interfaces, integration, design, architecture, etc. that may be represented as "product roadmaps." Any such information is for discussion purposes only and does not constitute a commitment by Aspen Technology to do or deliver anything in these product roadmaps or otherwise. Any such commitment must be explicitly set forth in a written contract between the customer and Aspen Technology, executed by an authorized officer of each company. AspenTech Support Center Solution 138526 10/20/2014 http://support.aspentech.com/webteamcgi/SolutionDisplay_view.cgi?key=138526 Page 2 of 2