Академический Документы
Профессиональный Документы
Культура Документы
_CODE
RAN_DISCONNECTION
_SUBCODE
Cause Name Disconnection Cause
Code
Disconnection Cause
Sub-Code
Unspecified 0 0
Radio Connection Supervision (RCS) 1 0
Radio Connection Supervision (RCS) 1 1
Radio Connection Supervision (RCS) 1 2
Radio Connection Supervision (RCS) 1 3
Radio Connection Supervision (RCS) 1 4
Congestion 2 1
Transport 3 0
Transport 3 1
Transport 3 2
Transport 3 3
O&M 4 1
Measurement control failure 5 1
Measurement control failure 5 2
Measurement control failure 5 3
Measurement control failure 5 4
Soft Handover 6 1
Soft Handover 6 2
Soft Handover 6 3
Soft Handover 6 4
Soft Handover 6 5
Soft Handover 6 6
Soft Handover 6 0
Inter Radio Access Technology (IRAT) 7 1
Inter Radio Access Technology (IRAT) 7 2
Inter-Frequency Handover (IFHO) 8 1
Inter-Frequency Handover (IFHO) 8 2
Inter-Frequency Handover (IFHO) 8 3
Channel Switching 9 1
High Speed Hard Handover 10 1
CN Hard Handover 11 1
Iu User Plane Control 12 1
CN Hard Handover 11 2
Trigger Identity
Paramet
er
Unspecified - all cases which will result in abnormal RAB disconnection
and do not map to any of the ones described below.
-
Other Radio Link Control (RLC) unrecoverable error. -
Radio Link Control (RLC) unrecoverable error in UTRAN (maximum
number of RLC retransmissions is reached).
-
Radio Connection Supervision - expiry of timer (rcsAllRlLostTimer or
rcsCchWaitCuTimer or hsDschRcLostT)
-
Radio link failure indication leading to a release with Cause =
transport.
-
Radio link failure indication leading to a release with cause other than
transport.
-
Congestion action - release triggered by congestion. Cell Id
Transport network failure All other CELLO_AAL2NCIFAILURE. -
Transport network failure - CELLO_AAL2NCI_TEMP_FAILURE. -
Transport network failure -
CELLO_AAL2NCI_MANAGEMENT_INDUCED.
-
Transport network failure - CELLO_AAL2NCI_OTHER_DC_IND_CAU -
Cell lock indication. Cell Id
MEASUREMENT CONTROL FAILURE that triggers a connection release -
intra-frequency.
-
MEASUREMENT CONTROL FAILURE that triggers a connection release -
inter-radio access technology.
-
MEASUREMENT CONTROL FAILURE that triggers a connection release -
inter-frequency.
-
MEASUREMENT CONTROL FAILURE that triggers a connection release -
traffic volume measurement setup.
Active Set Update complete message not received - addition. Scrambli
ng Code
of Radio
Link to
be
added.
Active Set Update complete message not received - deletion. Scrambli
ng Code
of Radio
Link to
be
deleted.
Active Set Update complete message not received - replacement. Scrambli
ng Code
of Radio
Link to
be
replaced.
Handover Evaluation release events - _EVENT_BUFFER_EXCEEDED. Scrambli
ng Code
of Radio
Link to
be
added/
removed.
Due to ReleaseConnOffset (for a cell not in the neighbor set). Scrambli
ng Code
of the
cell.
High Speed-Downlink Shared Channel (HS-DSCH) Cell Change failure
after A-DCH removal.
-
Other Handover Evaluation failure reasons:
(_UNSPECIFIED_RELEASE_CAUSE, _BUFFER_TIME_EXCEEDED,
_CELL_SYNC_INFO_NOTAVAILABLE)
Scrambli
ng Code
of the
cell.
IRAT outgoing failure - Timer T_reloc_overall expires. GSM cell
Id
Cell change outgoing failure Timer T_cellchange expires. GSM cell
Id
IFHO failure - reception of PHYSICAL CHANNEL RECONFIGURATION
FAILURE with cause other than physical channel failure received from
the UE on the source frequency.
Target
cell Id
IFHO failure - at expiry of timer Timer RRC T-PCR. Target
cell Id
IFHO failure - if ciphering is ongoing, and if RBs mapped on TM-RLC
entities have been established, and if a PHYSICAL CHANNEL
RECONFIGURATION COMPLETE message is received that does not
include one or both of the IEs COUNT-C activation time and Uplink
counter synchronization info
Target
cell Id
Transition to a DCH connection has been initiated but can not be
completed
Selection of HS-DSCH connection, including a Hard HO has been
initiated, but can not be completed
timeRelocoverall (MO: Handover) expires.
Relocation preparation procedure fails in source RNC due to either of
the following:
RELOCATION PREPARATION FAILURE received
timeRelocPrep (MO: Handover) expires
ERROR INDICATION with procedure code "Relocation Preparation"
CN Triggered Initialisation Failure
Comments
This event will have all other (not max retransmission) possible Special
purpose Processors RLC unrecoverable errors.