Академический Документы
Профессиональный Документы
Культура Документы
Metric Tutorial
April 2008
© 2008 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be
reproduced in any form, by any method, for any purpose.
Certain materials included in this publication are reprinted with the permission of the copyright holder.
Disclaimer
THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC. DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.
Trademarks
The following are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries: 3DEC (design/logo), 3December,
3December.com, 3ds Max, ActiveShapes, Actrix, ADI, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI,
AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk
Envision, Autodesk Insight, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap,
AutoSketch, AutoTrack, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil
3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer,
Create>what's>Next> (design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer,
DesignStudio, Design|Studio (design/logo), Design Your World, Design Your World (design/logo), DWF, DWG, DWG (logo), DWG TrueConvert,
DWG TrueView, DXF, EditDV, Education by Design, Exposure, Extending the Design Team, FBX, Filmbox, FMDesktop, Freewheel, GDX Driver,
Gmax, Heads-up Design, Heidi, HOOPS, HumanIK, i-drop, iMOUT, Incinerator, IntroDV, Inventor, Inventor LT, Kaydara, Kaydara (design/logo),
LocationLogic, Lustre, Maya, Mechanical Desktop, MotionBuilder, Mudbox, NavisWorks, ObjectARX, ObjectDBX, Open Reality, Opticore,
Opticore Opus, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream, ProjectPoint, ProMaterials, Reactor, RealDWG,
Real-time Roto, Recognize, Render Queue, Reveal, Revit, Showcase, ShowMotion, SketchBook, SteeringWheels, StudioTools, Topobase, Toxik,
ViewCube, Visual, Visual Bridge, Visual Construction, Visual Drainage, Visual Hydro, Visual Landscape, Visual Roads, Visual Survey, Visual Syllabus,
Visual Toolbox, Visual Tugboat, Visual LISP, Voice Reality, Volo, Wiretap, and WiretapCentral
The following are registered trademarks or trademarks of Autodesk Canada Co. in the USA and/or Canada and other countries: Backburner,
Discreet, Fire, Flame, Flint, Frost, Inferno, Multi-Master Editing, River, Smoke, Sparks, Stone, and Wire
All other brand names, product names or trademarks belong to their respective holders.
v
vi
Express Workshop
1
The Express Workshop tutorials focus on specific areas of AutoCAD MEP functionality, and highlight powerful features
that are integral to the most common MEP workflows. Each tutorial demonstrates tools you can use to complete tasks
that are common to an overall workflow. When you have finished these tutorials, you will have a basic understanding of
the AutoCAD MEP design and documentation tools, as well as some of the best practices that help you efficiently design
and develop an MEP project.
These tutorials are intended to be used with the AutoCAD MEP Global profile.
1
In the second half of the lesson, you add conduit that connects a dry transformer to an electrical panel. You
then add cable tray.
Setting Up
In this exercise, you specify the initial settings for the lesson, open the project and a drawing, and use the
Circuit Manager to view the starting electrical data in the project.
When the Electrical workspace is active, the Electrical menu displays at the top of the AutoCAD
MEP window, and the Electrical tool palettes group displays.
The Electrical tool palettes group is a collection of individual tool palettes. You open a tool
palette by clicking its tab.
The Annotation tool palette contains the annotation tools you use in this lesson, including the
Home Run Label tool and the Light ID tool.
You use the Properties palette, shown below, to view the properties of selected objects or to
specify properties for objects you are creating.
Setting Up | 3
Enable auto-hide for the palettes
move the cursor over the palette’s title bar to display the palette. You can click on the title
bar to disable auto-hide if needed.
■ Click Close.
10 If the Project Navigator palette is not displayed, click Window menu ➤ Project Navigator Palette.
■ Click OK.
14 If needed, enable auto-hide on the Project Navigator palette and move it to the right side of the
screen so that it does not obstruct the drawing.
View the entire drawing
15 Roll the mouse wheel to zoom the drawing out until both the building and the Lighting Fixture
Schedule are visible. To pan (move) the drawing, hold down the mouse wheel and drag.
In this lesson, when you need to zoom or pan the drawing, use the mouse wheel to do so.
The drawing contains 3 lighting fixtures assigned to circuit 1 of lighting panel LP1. The Lighting Fixture
Schedule in the drawing displays information about the 3 lighting fixtures.
Setting Up | 5
17 On the left side of the Circuit Manager dialog, expand LP1 (GF Panel) ➤ Power and Lighting.
All available circuits for the panel are listed, and detailed information is displayed for circuits
that have devices assigned to them.
19 On the application status bar below the drawing window, click MEP Design - No Grids & Spaces,
and select Electrical - Lighting.
20 On the status bar at the lower-left of the AutoCAD MEP window, click the icons until they are
all dark except for (Object Snap), (Dynamic UCS), and (Dynamic Input).
Inactive (off) snaps are dark; active (on) snaps are light.
■ Select Node.
Next, you add lighting fixtures to the drawing and tag them.
Dataset
Continue to use the project and the drawing, GF Lighting Model, that you opened in the previous exercise.
■ Click OK.
■ Expand Advanced, and for System, select 230V Lighting (230V LIGHTING).
■ Click OK.
On the command line at the bottom of the screen, you are prompted to specify an insertion
point for the lighting fixture. The other available options are also listed.
7 Click to select the Node snap and anchor the corner of the lighting fixture.
8 Position the Node snap as shown to specify the rotation of the lighting fixture.
■ Click Preview.
16 On the application status bar, click (Object Snap) to turn off object snaps.
24 Click the upper-left and lower-right corners of the area shown to specify a selection window
that includes 2 lighting fixtures.
The selected lighting fixtures are highlighted, and the command line displays the total number
of objects selected.
The selected lighting fixtures are tagged using the relative offset specified for the first tag.
Adding Wiring
In this exercise, you use the Properties palette to add a single-pole switch to the room. Then, you add the
wiring between the lighting fixtures and the switch. You also work with the lighting fixture schedule in the
drawing.
Dataset
Continue to use the project and the drawing, GF Lighting Model, that you used in the previous exercise.
■ Click OK.
4 On the Design tab of the Properties palette, under Location, for Elevation, enter 1200.
Adding Wiring | 13
5 Click in the location shown to place the switch.
■ Click OK.
■ Expand Advanced, and for System, select 230V Lighting (230V LIGHTING).
12 Enter g to automatically generate the wiring for all devices assigned to circuit 2.
Adding Wiring | 15
16 Click the Electrical End Connector snap on the lighting fixture as shown.
The wire between the lighting fixture and the switch is added.
23 On the Electrical tool palettes group, open the Annotation tool palette.
24 On the Annotation tool palette, click the Home Run Label tool.
Adding Wiring | 17
26 Click to place the tag.
The home run tag displays the panel name (LP1) and the circuit number (2).
The schedule lists information about the lighting fixtures in the drawing, including the quantity
of each type.
The lighting fixture is deleted from the drawing, and the count in the lighting fixture schedule
is updated.
Adding Conduit
In this exercise, you add a conduit that connects a dry transformer to a panel. To do this, you specify the
connection points on the transformer and the panel, and the conduit is automatically routed.
Dataset
Continue to use the project, AutoCAD MEP 2009 Express Workshop, that you used in the previous exercise.
Adding Conduit | 19
4 Zoom to the area shown.
5 Click in an empty area of the Top view to make it the active view.
6 Zoom to the area shown.
Grips display on the transformer in the locations where conduit can be attached.
9 If the Add Conduits dialog is minimized as shown below, move the cursor over the title bar to
expand the dialog.
10 If the Add Conduits dialog is not minimized, click so that the dialog is minimized when
the cursor moves out of the dialog.
11 In the Add Conduits dialog:
■ For System, select 230V Power Conduit.
13 Click in an unused area of the 3D view to make it active, and zoom to the panel shown.
Adding Conduit | 21
14 Click to select the Wireways End Connector snap on the panel as shown.
Dataset
Continue to use the project and the drawing, GF Electrical Equipment, that you used in the previous exercise.
2 Zoom the 3D view so that you can see the entire model.
Specify the cable tray properties
3 On the Electrical tool palettes group, open the Containment tool palette.
5 If the Add Cable Trays dialog is minimized as shown below, move the cursor over the title bar
to expand the dialog.
6 If the Add Cable Trays dialog is not minimized, click so that the dialog is minimized when
the cursor moves out of the dialog.
7 In the Add Cable Trays dialog:
■ For System, select Data Containment.
9 Move the cursor onto the title bar of the Add Cable Trays dialog to display the dialog.
10 For elevation, enter 3000.
19 Click the Add Cable Tray grip (the plus sign) as shown.
In the second half of this lesson, you connect 2 pumps to a chiller, add valves to the piping system, and
view the pipes using a variety of pipe size display settings and annotation scales.
Setting Up
In this exercise, you specify the starting settings for the lesson and open the project and a drawing used in
the lesson.
The HVAC tool palettes group is a collection of individual tool palettes. You open a tool palette
by clicking its tab.
2 On the HVAC tool palettes group, click the Equipment tab to open the Equipment tool palette.
The Equipment tool palette contains tools that you use in this lesson, such as the Diffuser tool.
You use the Properties palette, shown below, to view the properties of selected objects or to
specify properties for objects you are creating.
the cursor over the palette’s title bar to display the palette. You can click on the title bar
to disable auto-hide if needed.
■ Click Close.
Setting Up | 31
Open the drawing
9 If the Project Navigator palette is not displayed, click Window menu ➤ Project Navigator Palette.
13 On the status bar at the lower-left of the AutoCAD MEP window, click the icons until they are
all dark except for (Object Snap), (Dynamic UCS), and (Dynamic Input).
Inactive (off) snaps are dark; active (on) snaps are light.
■ Select Endpoint.
■ Select Node.
■ Click OK.
Adding Diffusers
In this exercise, you add diffusers to the drawing using several different methods.
Dataset
Continue to use the project and the drawing, 01 HVAC Ducting Model, that you opened in the previous
exercise.
Adding Diffusers | 33
Zoom the drawing
2 Roll the mouse wheel to zoom the drawing to the area shown. To pan (move) the drawing, hold
down the mouse wheel and drag.
Add 2 diffusers
3 On the HVAC tool palettes group, open the Equipment tool palette.
4 Under Air Terminal, click the Diffuser tool.
5 If the Add Multi-view Parts dialog is minimized as shown, move the cursor over the title bar to
expand it.
6 If the Add Multi-view Parts dialog is not minimized, click so that it is minimized when
the cursor moves out of it.
7 In the Add Multi-view Parts dialog:
■ On the Part tab, under MvParts ➤ Mechanical ➤ Air Terminals ➤ Diffusers, select 600 x 600
mm Square Faced Ceiling Diffuser.
■ Under Part Size Name, select 600 x 600 mm Square Plaque Face Ceiling Diffuser - 300 mm
Neck.
9 With the Node snap positioned as shown, click to anchor the diffuser.
■ Click Preview.
Adding Diffusers | 35
17 The array of diffusers displays.
28 On the application status bar, click Mechanical Duct 2-Line, and select MEP Design - No Grids
& Spaces.
Next, you add ductwork in the room containing the diffusers.
Dataset
■ Under Part Size Name, click 850 x 500 mm Electric Air Heating Coil 20 & 20 mm diameter.
10 On the HVAC tool palettes group, open the Duct tool palette.
11 Click the Duct Preferences tool.
12 On the Ducts tab of the Duct Layout Preferences dialog:
■ Select the first Apply Labels/Flow Arrows check box.
13 On the Vanes and Flanges tab of the Duct Layout Preferences dialog:
■ Select Enable Vanes.
14 On the Flex Ducts tab of the Duct Layout Preferences dialog, for Segment Mode, select
(Line).
15 On the Connections tab of the Duct Layout Preferences dialog:
■ Under Connect with Duct, select Use Takeoff.
16 Click OK.
Add a rectangular duct segment
21 If the Add Ducts dialog is not minimized, click so that it is minimized when the cursor
leaves it.
28 Move the cursor into the Add Ducts dialog to expand it.
29 For Diameter, select 400.
32 On the HVAC tool palettes group, open the Fitting tool palette.
33 Under By Type, click the Endcap tool.
34 Click the Duct End Connector snap at the end of the duct as shown.
35 Press ENTER.
The endcap is automatically sized and added.
Dataset
Continue to use the project and the drawing, 01 HVAC Ducting Model, that you used in the previous exercise.
Specify snaps
■ Under the AutoCAD MEP heading, verify that all the object snaps are selected.
■ Click OK.
3 On the HVAC tool palettes group, open the Duct tool palette.
4 Under By Shape, click the Round tool.
5 In the Add Ducts dialog, for Diameter, select 300.
6 Click the Duct Curve Connector snap on the duct in the location shown.
13 Enter a to accept.
14 Using the same procedure, connect 6 more diffusers as shown.
15 With the Duct tool active, click the Duct Curve Connector snap on the rectangular duct in the
location shown.
19 Enter a.
20 Press ENTER to end the command.
Tag diffusers requiring labels on the right side
21 On the HVAC tool palettes group, open the Tag and Schedule tool palette.
22 Under Tag, click the Air Terminal 1 tool.
23 Select the diffuser as shown.
28 Press ENTER.
29 In the Edit Property Set Data dialog, click OK.
The diffusers are tagged using the relative location specified for the first tag.
33 Enter m.
34 Select the 4 diffusers without tags.
35 Press ENTER.
The diffusers are tagged using the relative location specified for the first tag.
37 Press ENTER.
Next, you add pipes.
Adding Pipes
In this exercise, you add pipes that connect 2 pumps to a chiller.
Dataset
Continue to use the project AutoCAD MEP 2009 Express Workshop that you used in the previous exercise.
Adding Pipes | 49
Activate the Piping workspace
1 On the Workspaces toolbar, change the current workspace to Piping.
When the Piping workspace is active, the Piping menu displays at the top of the AutoCAD MEP
window, and the Piping tool palettes group displays.
Specify settings
■ For For pipe sizes less than or equal to, enter 100.
■ For For pipe sizes less than or equal to, enter 50.
12 Click OK.
13 In the Version Objects dialog, click Do Not Version.
Add a vertical pipe segment
14 On the Piping tool palettes group, open the Pipe tool palette.
15 Click the Pipe tool.
16 On the Design tab of the Properties palette:
■ For System, select Chilled Water.
17 In the Top view, select the Pipe End Connector snap on the left pump as shown.
18 On the Design tab of the Properties palette, for Elevation, enter 3300.
19 In the Choose a Part dialog, select Flanged - Generic Flange_gbm.
20 Click OK.
Adding Pipes | 51
In the 3D view, you can see the created vertical pipe segment.
22 On the Design tab of the Properties palette, under Nominal size, select 125.
23 In the Choose a Part dialog, select Flanged - Generic Concentric Reducer_gbm.
24 Click OK.
27 With the Pipe End Connector snap displayed, move the cursor vertically below the snap. The
Object Snap Tracking guide line displays.
Adding Pipes | 53
28 Click in the location shown to specify the endpoint of the pipe segment to be aligned with the
Pipe End Connector snap on the chiller.
A solution displays.
Adding Pipes | 55
33 Click the Pipe End Connector snap on the other pump as shown.
34 On the pipe above the pump, click the Pipe Curve Connector snap.
Adding Valves
In this exercise, you add gate valves to pipes you added to the drawing in the last exercise. You then change
the display configuration to view pipes in either 2-line, 1-line, or graphical 1-line display, depending on the
size of the pipe and the pipe size display settings.
3 In the 3D view, click the pipe Pipe Curve Connector snap on the vertical pipe segment as shown.
4 Click in an empty area of the Top view to make it the active view.
5 In the Top view, place the cursor as shown so that the handwheel of the gate valve points in
the direction shown.
Adding Valves | 57
Add a gate valve to another vertical pipe segment
8 In the 3D view, click the vertical pipe segment connected to the other pump as shown.
9 In the Top view, place the cursor as shown so that the handwheel points in the direction shown.
11 With the Gate tool still active, move the cursor onto the Add Multi-view Parts title bar.
12 In the Add Multi-view Part dialog:
■ On the Part Filter tab, for Nominal Connection Diameter ND1, select 125.
■ Under Part Size Name, select 125 mm Gate Valve - Flanged PN6 - Cast Iron.
Adding Valves | 59
17 Select the top grip as shown.
18 Click to position the valve so that it is aligned with the valve to its right.
19 Press ENTER.
20 Zoom both views so that you can see all the piping in the area of the pumps and the chiller.
Adding Valves | 61
28 Press ENTER to select all.
29 On the status bar at the bottom of the drawing window, click 1:100, and select 1:50.
The change does not affect the display size of the valve symbols on the 100 mm (1-line) pipe.
The ball valve, which is displayed with a graphical 1-line symbol, changes size to reflect the
change in the drawing annotation scale.
You have completed the Express Workshop lesson Creating Mechanical and Piping Systems.
Adding Valves | 63
64