Академический Документы
Профессиональный Документы
Культура Документы
Piping Tutorial
April 2008
© 2008 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be
reproduced in any form, by any method, for any purpose.
Certain materials included in this publication are reprinted with the permission of the copyright holder.
Disclaimer
THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC. DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.
Trademarks
The following are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries: 3DEC (design/logo), 3December,
3December.com, 3ds Max, ActiveShapes, Actrix, ADI, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI,
AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk
Envision, Autodesk Insight, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap,
AutoSketch, AutoTrack, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil
3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer,
Create>what's>Next> (design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer,
DesignStudio, Design|Studio (design/logo), Design Your World, Design Your World (design/logo), DWF, DWG, DWG (logo), DWG TrueConvert,
DWG TrueView, DXF, EditDV, Education by Design, Exposure, Extending the Design Team, FBX, Filmbox, FMDesktop, Freewheel, GDX Driver,
Gmax, Heads-up Design, Heidi, HOOPS, HumanIK, i-drop, iMOUT, Incinerator, IntroDV, Inventor, Inventor LT, Kaydara, Kaydara (design/logo),
LocationLogic, Lustre, Maya, Mechanical Desktop, MotionBuilder, Mudbox, NavisWorks, ObjectARX, ObjectDBX, Open Reality, Opticore,
Opticore Opus, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream, ProjectPoint, ProMaterials, Reactor, RealDWG,
Real-time Roto, Recognize, Render Queue, Reveal, Revit, Showcase, ShowMotion, SketchBook, SteeringWheels, StudioTools, Topobase, Toxik,
ViewCube, Visual, Visual Bridge, Visual Construction, Visual Drainage, Visual Hydro, Visual Landscape, Visual Roads, Visual Survey, Visual Syllabus,
Visual Toolbox, Visual Tugboat, Visual LISP, Voice Reality, Volo, Wiretap, and WiretapCentral
The following are registered trademarks or trademarks of Autodesk Canada Co. in the USA and/or Canada and other countries: Backburner,
Discreet, Fire, Flame, Flint, Frost, Inferno, Multi-Master Editing, River, Smoke, Sparks, Stone, and Wire
All other brand names, product names or trademarks belong to their respective holders.
v
vi
Starting a Piping Drawing
1
In this tutorial, you learn how to create part of a piping system for a research laboratory. In
the process, you learn the primary concepts of how to use AutoCAD® MEP to draw piping
systems and produce construction documents.
In this lesson, you learn how to start a drawing. You also learn how to work with projects
and insert reference drawings.
You must extract the project files in order to complete any part of this tutorial.
If you edit any of the project files, you can extract the files again to reset the
project to its original state. You can search My Documents\Autodesk\MyProjects
to see if the Research Laboratory dataset has already been extracted.
1
NOTE This tutorial references Windows XP file paths. If you run Windows Vista,
they might be different.
This tutorial requires that the Global content pack be installed as part of the
AutoCAD MEP installation for your workstation. The Global content pack is
made up of metric content, metric templates, and an AutoCAD MEP (Global)
user profile.
While you may be accustomed to using imperial units in your day-to-day
work, the lessons in this tutorial cover all of the same tasks necessary for you
to complete designs and create construction documents using either metric
or imperial units.
In order to complete the tutorial, you must have your current profile set to
AutoCAD MEP (Global). To check the profile setting, in AutoCAD MEP click
If AutoCAD MEP (Global) is not the current profile, select it from the list and
click Set Current. If AutoCAD MEP (Global) is not listed as a choice in the
Options dialog, this means that the Global content pack was not installed
when AutoCAD MEP was installed on your workstation.
To add the Global content pack to your AutoCAD MEP installation at any
time, rerun the installer, and select the Add or Remove Features option. To
rerun the installer, open the Add or Remove Programs dialog in the Control
Panel, and click Change/Remove. For more information, refer to the online
AutoCAD MEP installation guides.
If you installed a shortcut for the Global profile, double-click the shortcut to
launch AutoCAD MEP with the Global profile set as current.
6 Click Close.
The Project Browser is closed, but the project is still active until
you change to another project. When you start AutoCAD MEP
the current project is the last one specified before the software
was closed.
The Project tab on Project Navigator displays general project
information.
You assign construct drawings to floors, and then use those floor
assignments when creating view drawings.
10 Click OK.
5 Click OK.
Create a new construct drawing
12 Click OK.
The new construct drawing is added to the Piping category under
Constructs. When you create a new construct drawing, it is not
automatically opened in the software. You can open a new
drawing from Project Navigator by double-clicking the drawing
name.
7 Click Cancel.
Next, you view system definitions. These settings control the
appearance and function of parts in a system.
14 Click Cancel.
Next, you view routing preferences that specify the default parts
to use during layout.
18 Click Cancel.
The last settings you view are for pipe preferences.
20 Click Cancel.
In this exercise, you viewed important configuration settings for pipes. You
viewed system definitions, which control how the pipes display and function,
and you viewed pipe preferences, which control how pipes behave as you
draw them. You also viewed pipe display by size in the system definitions,
and you viewed a routing preference with different connection types depending
on pipe size.
When you add an xref drawing, you can attach it or overlay it.
For construct drawings, overlays are recommended. If you attach
a drawing as an xref, you add all of the reference drawing data to
the current drawing. An overlay does not add its drawing data to
the current drawing, which can help minimize file sizes. For view
drawings, however, it is recommended that you attach xrefs if
you want the reference drawing geometry to display on the sheet.
It is recommended that you use 0,0,0 for the XYZ insertion
coordinates. As you develop construct drawings based on this
floor plan, you can xref them into views and other constructs by
inserting them at 0,0,0. This maintains accurate locations for each
subsequent system designed around the floor plan.
In later lessons, you add pipe systems to the west side of the building. Next,
you clip the reference drawing to display only the west side in the drawing.
This makes it easier to work on this specific portion of the building.
Clip the reference drawing
6 Select the floor plan by moving the cursor over any linework, and
click.
The floor plan is highlighted.
19
If you are prompted to repath, click Yes.
4 Click Close.
5 In the Project Navigator, click the Constructs tab.
6 Expand Piping ➤ Lesson 2, and double-click Piping_L02_E01 to
open it.
11 Click OK.
12 Next, you change display configurations. On the application status
bar, click MEP Design, and select MEP Basic 2-Line from the list.
15 In the Add Multi-view Part dialog, the catalog in the Part tab opens
to Mechanical ➤ Chillers ➤ Centrifugal Chiller.
16 The centrifugal chillers in this location start at 600-670 KW. To
find the smaller chillers, scroll to Refrigeration Equipment, expand
it, and select Centrifugal Chillers.
TIP To minimize dialogs while keeping them active, click the pushpin
NOTE If you are running Windows Vista, the pushpin icon is not
available.
28 The chiller was placed with an elevation of 0, and the pad height
is 100 mm. Select the chiller, and on the Properties palette, click
the Design tab.
30 With the chiller still selected, right-click, and click Basic Modify
Tools ➤ Copy.
31 To specify the base point for copying, click the upper-right pad
corner as shown.
40 Select the pump, right-click, and click AEC Modify Tools ➤ Center.
41 Press Enter to specify 2 points for the line on which to center the
pump.
43 Repeat the previous steps to center the pump along the short edge
of the pad.
44 Select the pump, right-click, and click Basic Modify Tools ➤ Copy.
45 To specify the base point, click the lower-right pad corner as
shown.
7 Select the top chiller, and click the Add Pipe grip for chilled water
supply, as shown.
9 Move the cursor directly to the right, enter 600, and press Enter.
A 600 mm long pipe is added.
22 Select the first pump on the left, and click the Add Pipe grip on
the outlet as shown.
26 An elbow is inserted to route the pipe from the first pump to the
second. Enter a to accept the connection.
27 Press Enter to end the command.
28 Switch to NE Isometric view to see the results.
36 Move the cursor directly to the chiller pipe end, and then move
the cursor down to display tracking lines as shown. Specify the
37 Move the cursor to the chiller pipe end, and click the pipe end
connector.
41 Next, you modify the pipe sizes up to the tee. Select the tee and
the pipe segment.
3 Open the Fitting tool palette, and click the Connector tool.
4 On the Properties palette, click the image next to Part to open
the Select a Part dialog.
5 Expand Commercial Pipe and Fittings ➤ Asymmetric
Connectors ➤ Flanged under Pipe (Global).
6 Select Flanged - Generic Flanged_gbm.
8 Click OK.
9 Move the cursor to the end of the pipe, and click on the pipe end
connector.
18 Click OK.
19 Move to the flange face, and click the pipe end snap.
29 Press Esc to deselect the pipe. The lower pipe segment is now at
the desired 2750 mm elevation, and the upper segment is still in
its original location.
32 Click the location grip at the midpoint of the pipe, and move it
down approximately as shown.
33 Click to specify the new location. Note how the rest of the pipe
run moved down as well. The tee moved down, and the
connecting pipe adjusted its length to accommodate the new
location. The pipe run is still fully connected.
17 Click OK.
18 Click the pipe end connector.
30 Click OK.
41 Select the pipe, and click the Add Pipe grip on the open end.
Orbit .
54 Move the cursor straight up, and click the pipe curve connector
as shown.
59 Click OK.
8 Repeat the previous steps to add another gate valve on the other
chiller as shown.
11 Repeat the previous step on the other gate valve to set its elevation
to 1500 mm.
12 Press Esc to deselect the valve.
Add a valve
1 Switch to NE Isometric view, and zoom in on the 50 mm pipes
connected to the AHUs.
5 With the command still active, select the other pipes as shown,
and press Enter.
7 Press Enter to end the command, and close the drawing without
saving.
In this exercise, you added pipe size labels for annotation.
5 With the tag command still active, on the command line, enter
m to tag multiple objects.
9 Select one tag, right-click, and click Select Similar to select all 4
tags.
10 On the Properties palette, click the Extended Data tab.
12 Scroll through the rest of the property sets to view the other data
fields you can specify, such as technical specifications and
manufacturer information. These data values can be used in
schedules.
enabled .