Академический Документы
Профессиональный Документы
Культура Документы
FEATURES
1003 MHz Enhanced
Gallium Arsenide (E-GaAs)
power doubling technology
High gain
High output level
Multiple diplex filter
frequency split options
N-split (5 to 85 MHz/104 to
1003 MHz) available
Ease-of-use ergonomics
16 dB return loss
60/90 V powering
Meets Telcordia GR1098-Core voltage surge
requirements using IEEE
C62.41 surge waveforms
FCC, CENELEC, and CCC
approved
RoHS-compliant models
available
Bode equalization (thermal
or auto controlled)
15 A AC capability
Optional return path ingress
control and status monitor
Directional coupler 20 dB
test points
STARLINE Series
BLE100 1GHz Line Extender
Motorolas 1 GHz STARLINE BLE100 Broadband Line Extender leads the
industry in features and performance. This two-waycapable single-output
amplifier offers high gain, high output levels, ergonomics, superior distortion
performance, multiple diplex filter options, 16 dB return loss, and Bode
equalization, as well as optional advanced features such as ingress control
switching and status monitoring.
Enhanced Gallium Arsenide
The BLE100 uses second-generation Enhanced
Gallium Arsenide (E-GaAs) hybrid technology to
provide superior distortion performance in CTB
and CSO over the standard silicon and competing
GaAs technologies. E-GaAs distortion performance
remains linear at significantly higher output
levels, allowing the operator to maximize system
performance and reduce system costs. Motorola
encourages customers to contact their Motorola
Account Representative to determine optimal
system levels.
High Gain
The BLE100 offers high gain, allowing the operator
to hold existing amplifier locations during system
upgrades, reducing maintenance, installation, and
powering costs.
Return Path
High-gain return amplifier kits providing 24 dB
minimum station gain are available. Return path
equalizers from 0 to 12 dB can be selected. Thermal
compensation is an optional feature, available as a
plug-in JXP-TH*C, which stabilizes gain and match
over temperature extremes.
Ingress Control Switching (ICS) in three states is
also available. This pin diode attenuator circuit can
lower levels by 6 dB or by 38 dB with a controlled
slew rate for minimum bit errors. The LIFELINE
Broadband Line Extender transponder (available
directly from AM Networks) and accompanying
deeper housing lid are required to operate the
Ingress Control Switch from a remote location.
DATA SHEET
STARLINE BLE100 1 GHZ LINE EXTENDER
Forward Path
The operational gain of the BLE100 is 34 dB, with
16 dB return loss. Output level control is achieved
through the use of an interstage Bode equalizer,
which compensates for coaxial cable attenuation
changes due to temperature. Equalization may
be controlled manually, with a thermal drive unit
(TDU), or with a single-pilot closed-loop automatic
drive unit, model ADU-* (analog pilot) or QADU-*
(QAM pilot). Both the ADU and QADU boards are
common to the STARLINE family of amplifiers (with
the exception of the SLE and MBV3). ADUs use
Surface Acoustic Wave (SAW) filters for determining
pilot frequency, improving amplifier stability over
temperature.
To further ensure system flexibility, installation ease,
and maintenance, the amplifier is engineered for
compatibility with standard accessories, such as
attenuators, equalizers, ADUs or QADUs, return
amplifiers, automotive fuses, and FTEC crowbar
circuits.
Block Diagram
DATA SHEET
STARLINE BLE100 1 GHZ LINE EXTENDER
Specifications
Units
Forward
Return
(RA-Kit/H)
Units
Forward
Return
(RA-Kit/H)
Passband1
MHz
521003
540
DC Voltage15
Flatness2
dB
0.7
VDC
24.00.25
24.00.25
0.5
Current DC16
mA
800
925
dB
Operational Gain4
dB
38
NA
DC Ripple
mV
15 P-P
15 P-P
34
24
Power Consumption
22.6
26.6
dB
NA
AC Input Voltage
Range
VAC
3890
Interstage Equalizer
Slope6
dB
91
NA
Noise Figure
40/52/870/1003 MHz7
dB
NA/8/8/8
5.5/NA/NA
Reference Frequency8
MHz
1003/550/52
Output Level
dBmV
45/44/37
35 flat
AC Current Draw17
@90 VAC
@75 VAC
@60 VAC
@53 VAC
@45 VAC
@38 VAC
A
A
A
A
A
A
Forward only
0.48
0.50
0.56
0.60
0.67
0.75
Channel Loading
NTSC
79
AC Bypass Current 17
Compressed Data
Loading20
MHz
450
NA
Distortion
CTB9,19,21
XM10,19
CSO9,11,19
dBc
dBc
dBc
76
70
71
80
70
81
dB
201
Return Loss13
dB
16
15
Group Delay18
55.25 to 58.83 MHz
61.25 to 64.83 MHz
67.25 to 70.83 MHz
77.25 to 80.83 MHz
5.0 to 6.5 MHz
10.0 to 11.5 MHz
33.5 to 35.0 MHz
38.5 to 40.0 MHz
nSec
nSec
nSec
nSec
nSec
nSec
nSec
nSec
dBc
dBc
dBc
dBc
70 (52900 MHz)
65 (9011003MHz
65 (52900 MHz)
60 (9011003MH
60 (510 MHz)
70 (1140MHz
55 (510 MHz)
65 (1140MHz
Hum Modulation
@12 A
15 (10 A option)
32
9
5
2
NA
NA
NA
NA
NA
NA
NA
NA
45
10
12
35
Housing Dimensions
Weight
Ambient Operating
Temperature
40 F to 140 F (40 C to 60 C)
14
@15 A
With return
0.56
0.59
0.65
0.70
0.78
0.88
All specifications are stated as worst-case over temperature unless otherwise noted.
1.
13. Match measurement at the station input and output, cableentry facilities, at the specified passbands for operational gain.
14. Measured with the AC bypass current.
15. Measured at the power connector.
16. Current draw at 24 VDC.
17. Stated in RMS continuous. A 10 A compatible electronics
package is also available for installing into older 10 A housings
during upgrades.
18. Specified for standard NTSC video, where delay is the delta
from picture carrier to 3.58 MHz color subcarrier. Reverse
delay is in a 1.5 MHz bandwidth.
19. Worst-case over temperature in a cascade.
20. QAM carriers, 6 dB relative to the analog CW carriers.
21. At the specified channel loading, E-GaAs performance varies
on a 2.3:1 basis with amplifier output level.
*
DATA SHEET
STARLINE BLE100 1 GHZ LINE EXTENDER
Order Information
Model
Description
Part Number
BLE100S-HAXH-F
711000-002-00
BLE100S-HTXH-F
711000-003-00
BLE100S-HXXH-F
711000-004-00
BLE100S-HXXH-E15
711000-005-00
BLE100S-HSXH-F
711000-021-00
BLE100S-HTXH-F-W
711000-028-00
BLE100K-HAXH-F
711000-008-00
BLE100K-HTXH-F
711000-009-00
BLE100K-HSXH-F
711000-027-00
BLE100J-HXXH-F-R
811000-002-00
BLE100A-HXXH-F-R
811000-001-00
BLE100N-HXXH-F-R
811000-005-00
Required Accessories
One of the following per BLE:
SFE-100-0
535723-001-00
SFE-100-1 to -22
SCS-1 to SCS-10
531161-001 to -010
SRE-*-*
531163-XXX-00
JXP-*B
531186-XXX-00
DATA SHEET
STARLINE BLE100 1 GHZ LINE EXTENDER
Notes:
1) Not all combinations in the ordering guide are available. This is a guide only. Please see Ordering Information in data sheet
(page 5) or Customer Print Sheet in pricing tool for a complete list of available models.
2) FTECs are included in all models as standard, except for the vanilla models, BLE-100*H, which contain the standard gas tube
surge arrestor.
3) 20A fuses are included in all amplifiers as standard.
4) ICS and status monitor transponders will continue to be customer configurable options.
5) For RoHS models, add -R to the end of the model string.
Motorola, Inc., 101 Tournament Drive, Horsham, Pennsylvania 19044 U.S.A. www.motorola.com
MOTOROLA and the Stylized M Logo are registered and Broadscape is trademarked in the US Patent & Trademark Office. All other
product or service names are the property of their respective owners. Motorola, Inc. 2010. All rights reserved.
365-095-14729 x.2 07/10