Академический Документы
Профессиональный Документы
Культура Документы
CHECKLIST/TABLE OF CONTENTS
In Current office (Pages 2-6)
Step 1: Power Down server and Disconnect Cables (pages 2-5)
Step 2: Power Down Wireless Router and Disconnect Cables (page 6)
Step 3: Power Down Modem and Disconnect Cables (page 6)
1 of 9
Notify anyone in the office that the network will be down shortly.
Log in to any of the laptops in the office.
Click on the start button
Type on the keyboard remote desktop connection and press enter.
2 of 9
8. After the connection is complete you will see the desktop of the server.
3 of 9
10. Label every wire attached to the server including the hard drive connected to the front.
4 of 9
(Take note if it is not specified, everything is labeled alphanumerically from left to right)
P stands for power
R->L means from right to left
12. After the picture has been taken, carefully unplug all cables and equipment and put them in
boxes labeled SERVER. This will include a mouse, monitor, and keyboard.
**IMPORTANT** Note that the red and blue Ethernet cables (circled in the picture below) are
also connected to the wireless router. Leave these cables connect to the wireless router for
now and do not pack them with the other server cables.
5 of 9
Notify anyone in the office that the WIFI network will be down shortly.
Label all cables that are connected to the router in the same manner as the server.
After the cables have been labeled, take a picture of them as they are currently attached.
Carefully unplug the power cable and then the rest of the cables.
**IMPORTANT** Note that the blue Ethernet cable (circled in the picture below) is also
connected to the Modem. Unhook this cable from the wireless router only, leave it connected
to the modem and do not pack it with the other wireless router cables.
6 of 9
10. Follow steps 3-8 on pages 2 and 3 of this document to verify connectivity to the server.
8 of 9
9 of 9