Академический Документы
Профессиональный Документы
Культура Документы
CHANNEL1 SPW1
Differential pressure orifice plant
CHANNEL2 SPW3
Differential pressure across pump
CHANNEL3 SSO1
Rotational speed of impeller
CHANNEL4 STS1
Water temperature at inlet to pump
CHANNEL5 SWA1
Electrical power consumed by pump motor
:Procedure
1. Make sure that the pump is turned off. Open the pump intake
valve fully. Close
the pump discharge valve. Start the pump and adjust the power
controller to
100% (maximum pump speed). Open the discharge valve fully and
allow all of
the air bubbles to exit the system.
5. When finished turn the power controller to 0%. Turn the power
switch to the console and the power strip to off. Unplug the console
and power strip from their power sources
Data Table of Pump
60
50
Rotational Speed (Hz)
40
30
pump
20
10
0
0 20 40 60 80
Differential Pressure (Kpa)
29.8
29.75
29.7
29.65
Temperature
29.6 pump
29.55
29.5
29.45
29.4
29.35
0 10 20 30 40 50 60 70
Differential Pressure (Kpa)
350
300
250
Power (W)
200
pump
150
100
50
0
0 10 20 30 40 50 60 70
Differential Pressure (Kpa)
350
300
250
Power (W)
200
pump
150
100
50
0
0 10 20 30 40 50 60
Rotational Speed (Hz)