Академический Документы
Профессиональный Документы
Культура Документы
EXPERIENCE
Relevant Engineering Skills
Ground and water engineering design
I can apply site investigation to real life geotechnical problems, designing shallow foundations and piles based on
Standard Penetration Tests, settlement calculations of pile foundations. I can also compute consolidation
Settlement.
I have knowledge of storm water design calculations. I can design drainage systems through the combination of the
energy equation, friction losses, open channel flow theories, hydrological principles, preliminary design calculations
using appropriate standards for calculations.
Geomechanics (MATLAB)
I developed a methodology to solve embedded walls following the free earth support method. An anchored sheet
pile was constructed to retain soil to a certain height. The cohesion of the soil, the angle of internal shearing
resistance and the bulk unit weight were considered. Tie rods were fixed to the embedded wall at a certain height.
Using MATLAB software, I was able to:
Display in a graph the distribution of effective vertical and horizontal stresses as a function of depth.
Display in a graph the residual moment and the anchored force as a function of the depth of the
penetration.
Determine the accurate depth of penetration.
Determine the accurate force in the tie rod.
A knowledge and understanding of: Basic principles underlying bearing capacity and settlement of shallow
and deep (piled) foundations.
An ability to (thinking skills): Identify possible failure mechanisms and assess causes of excessive settlements
of foundations.
An ability to (practical skills): Design shallow (strip/pad) or deep (pile) foundation so that it has an adequate
margin of safety against collapse, distinguishing between ultimate (general or local shear failure) and
allowable bearing capacity. Predict the likely settlement of a simple shallow foundation during the working
life of the structure being supported, distinguishing between immediate and long-term settlement.
Identify the various independent and combined mechanisms by which plastic structural collapse can occur.
Distinguish the axial and bending load carrying actions in framed structures.
Position loads on structures in order to obtain worst load case conditions.
Identify possible shapes leading to structural instability in simple beam/column structures.
Apply the theory of elasto-plastic bending to determine shapes factors for various sections.
Determine the load of continuous beam structures.
Use the kinematic approach to determine the limit load of framed structures (portal and gable).
Calculate the buckling load for simple beams and columns.
Conceptual design
I have the knowledge and understanding of: design considerations for design of steelwork, reinforced concrete
(liquid-retaining), foundations and drainage systems; the design process and the data required for design. I have
attained these skills:
Thinking skills: I can visualise structural form to identify problems, and disassemble a structure for element
design. I can make planning and design decisions by utilizing knowledge of steel, reinforced concrete,
geotechnics and fluids for design calculations by hand or commercial software.
Practical skills: I can use my knowledge of British Standards and Eurocode Standards to check or size
elements for final designs. I have an awareness or feel for expected sizes and a critical scrutiny of
calculations. Communication of design decisions by production of formal drawings using detailer software
and AUTOCAD.
Key Skills: I can work as a team member including working to deadlines. I have sufficient logistical skills to
work through a problem from scratch, by building up information from British Standards, Eurocode and
other sources. I can manage project time, learn software and effectively take notes.
EDUCATIONAL QUALIFICATION
2009-Jan 2014
KCSE: 2003-2006
KCPE: 2002
2013 May:
Nov 2008
Other skills
Group Co-operation. Demonstrated during my degree throughout a group project. I contributed in designing a
pyramid shaped bridge that was meant to sustain a moving universal load (For example a train). The design was
not only aesthetically beautiful but also structurally viable.
Problem Solving. I manifested skills in risk optimization during my degree. I perfected the use of Palisade Risk
Optimizer add on for Microsoft Office Excel during a case study on how to reduce wastage and cost in a solder
manufacturing plant simultaneously.
Communication. I have sharpened my communication skills throughout my work experience and group work in
tasks during my degree course. I have perfected my report writing skills and I am able to deliver a detailed
engineering journal based on my research. I am able to use AutoCAD to create technical drawings that will be
understood by other civil engineers and construction personnel.
WORK EXPERIENCE
June 2014- Ongoing. Nairobi City County, Roads, Public Works and Transport, Structural Section.
Work Experience.
Tasks include;
Ensuring the bucket elevators were fitted inside the casing protectors. An allowance was given to prevent
excessive vibration and cracking.
Construction site for the weighing of seed and grain.
Construction of inspection areas for sieve and dust vacuum separators.
Stock control.
Human resource Management.
Supervising staff attendance.
Sylvanus Tikollo, Stuctrural Engineer Nairobi City County, Roads, Transport and Public Works, , Structures
Section- 0722737128