Академический Документы
Профессиональный Документы
Культура Документы
OBJECTIVE
This Lab is intended to show you how to create, simulate, and analyze a UHF
probe shown in Fig (1), using the Ansoft HFSS Design Environment.
Lab - 4
Spring 2010
Radius
dX: 0.31 in,
dY: 0.0 in,
dZ: 0.0 in,
Height
dX: 0.0 in,
dY: 0.0 in,
dZ: 5.0 in,
Radius
dX: 0.37 in,
dY: 0.0 in,
dZ: 0.0 in,
Height
dX: 0.0 in,
dY: 0.0 in,
dZ: 5.0 in,
Lab - 4
Spring 2010
3
b) Create Ring 2
Name: ring_2
Select the menu item Edit > Select > By Name.
Select Object Dialog,
Select the objects named: ring_1
Click the OK button.
Select the menu item Edit > Copy.
Select the menu item Edit > Paste.
Change the dimensions of Ring 2
To change the dimensions of ring_2 , expand the model tree. It should be
noted that order of the editing is important. If you make the inner radius >
Lab - 4
then the outer radius, an invalid object will result and it will be removed
from the model.
Using the mouse, double click the left mouse button on the CreateCylinder
command for ring_2 .
Properties dialog
o Change the radius to: 0.5 in o
Click the OK button
Using the mouse, double click the left mouse button on the CreateCylinder
command for ring_inner1
Properties dialog
o Change the radius to: 0.435 in o
Click the OK button
Spring 2010
2. Create Arm_1
Name: arm_1
Opposite Corner
dX: 0.2 in,
dY: -4.69 in,
dZ: -0.065 in,
3. Group Conductors
Lab - 4
Radius
dX: 0.1 in,
dY: 0.0 in,
dZ: 0.0 in,
Height
dX: 0.0 in,
dY: 0.0 in,
dZ: 5.1 in,
Spring 2010
5. Create Arm_2
Name: arm_2
Lab - 4
Opposite Corner
dX: 0.2 in,
dY: -5.0 in,
dZ: -0.065 in,
Spring 2010
Radius
dX: 0.0625 in,
dY: 0.0 in,
dZ: 0.0 in,
Height
dX: 0.0 in,
dY: 0.0 in,
dZ: 5.1 in,
7. Group Conductors
Task - 1:
Create a Wave Port and excite it.
Instructors Verification:
Lab - 4
Spring 2010
Task - 2:
Create the Air of shape box. Also create the Radiation Boundary, Infinite Ground
Plane and Radiation Setup.
Instructors Verification:
Task - 3:
Analyze the model you have created.
Instructors Verification:
PLOT:
Lab - 4
Spring 2010
Task - 4:
Create report (Modal S-Parameter Plot - Magnitude) of the model you have
analyzed in Task - 3.
Instructors Verification:
PLOT:
Task - 5:
Create report of the model you have analyzed in Task - 3.
Instructors Verification:
PLOT:
Lab - 4
Spring 2010