Академический Документы
Профессиональный Документы
Культура Документы
Hirens BootCD (HBCD) is a bootable CD that contains a set of tools that can help users
to fix their computer if their system fails to boot. More specifically, HBCD contains
hardware diagnostic programs, partition tools, data recovery utilities, antivirus tools
and many other tools to fix your computer problems. I write this article because I use
Hirens BootCD frequently to troubleshoot computer problems, specially when a
computer doesn't boot anymore due to a virus attack or due to a corrupted file system.
In this article you will find instructions on how to put Hirens BootCD on a USB flash
drive (stick) in order to troubleshoot computer problems in the future.
5. Then click the icon next to ISO Image entry to select the Hirens ISO Image file
Hiren's.BootCD.15.2.iso from your computer.
6. Inside the Hirens Boot 15.2 folder, select the Hirens BootCD 15.2.iso image file
and choose Open.
Wait until Rufus utility erases your USB stick and transfers Hirens Boot ISO files to it.
9. When Rufus operation is completed, close Rufus utility, unplug the USB stick and
use it in the future to troubleshoot your computer.
Notice: In order to boot from the Hirens Bootable USB stick, you must set the USB as
first boot device from your BIOS settings.To do that:
1. Power On your computer and press "DEL" or "F1" or "F2" or "F10" to
enter BIOS (CMOS) setup utility.
(The way to enter into BIOS Settings depends on the computer manufacturer).
2. Inside BIOS menu, find the "Boot Order" setting.
(This setting is commonly found inside "Advanced BIOS Features" menu).
3. At Boot Order setting, set the USB-HDD as first boot device.
4. Save and exit from BIOS settings.
That's it!
7.
8.
You will see Hiren Boot CD Menu. Select Disk Clone Tools as shown
below.
9.
10.
11.
12.
13.
14.
Click Backup and Restore. Then select Backup and Next.
15.
Click NTFS. Read the instructions carefully.
16.
Write the file name as you want and show the directory where to save.
17.
Select your windows drive (Most of the case C:\) Create full backup
image archive.
18.
Select compression level. The more you compress the lesser space it will
take.
19.
You can give password or comments as you wish.
20.
Click Proceed. Then your backup will be created.
Restore Backup
If you windows crashes its time to restore the image. Follow the instruction 4 to 10. Click
on the Backup and Restore. Select Restore option. Select the backup file you have
created earlier and Next. Check the drive in your backup or archive.Select the drive which
you want to replace with your backup. Make your replacement MBR (Master Boot Record).
If you don't know which option to select just go with the default. Proceed the operation.
If you are facing any trouble with the process then leave a comment. I'll solve it.