Академический Документы
Профессиональный Документы
Культура Документы
SAFETY INSTRUCTIONS
WARNING
When using electric tools, basic safety precautions should always be followed
to reduce the risk of fire, electric shock and personal injury. This appliance
is not intended for use by young children or infirm persons unless they have
been adequately supervised by a responsible person to ensure that they can
use the appliance safely. Young children should be supervised to ensure that
they do not play with the appliance.
SAFETY FIRST
Read all instructions thoroughly and learn the appliances operating limitations and
potential hazards of this tool before attempting to operate it.
1.
2.
3.
4.
Dress Properly
Dont wear loose clothing or jewellery. They can be caught in
moving parts. Rubber gloves and non-skid footwear are
recommended when working outdoors. Wear protective hair
covering to contain long hair.
5.
6.
7.
Assembly
Assemble the eye shield, spark breakers and tool rests using the screws provided.
Be sure to position both the tool rests and spark breakers no more than 2.0 mm
from the edge of the grinding wheel.
It is advisable to secure the edge of the grinder to the workbench or stand.
The grinder should always be mounted on a clean, firm surface such as a bench top
and should not be used unless bolted down.
The tool rest must be assembled so the wheel rotates freely, but with a gap of no
more than 2 mm between the rest and the wheel.
Tool rest
On/Off switch
Operation
After switching on the grinder allow it to reach full speed before commencing
grinding operation.
The eye shields are able to be adjusted and should be positioned to allow the
operator a clear view of the work through the shields.
The appropriate adjustments of the tool rests will provide the correct working angle
for efficient grinding. As the diameter of the grinding wheel is subject to wear, it
will be necessary to re-adjust the tool rests positions to maintain the correct gap of
less than 2.0 mm with the edge of the grinding wheel.