Академический Документы
Профессиональный Документы
Культура Документы
piece of wood.
Get the four nuts, bolts, and washers to attach the flange to the bottom of the stripper pole base.
Plywood usually comes in 4'x8', so get one of those and get them to cut it in half (again, they'll do that at H. Depot for you).
Get 12' worth of 2"x6" board. Cut it into two 4' pieces, one 1' piece, and two 1 1/2' pieces.
You'll want a drill with a bit the same size as the bolts for the flange.
Get some 2 1/2" nails or whatever you have lying around. You might also want a hammer or your brother's head.
If you want the pole to be more sturdy, get a bunch of bricks or flat-cinder-blocks to put in the base.