Академический Документы
Профессиональный Документы
Культура Документы
Innovators in Solids
Ring Mills
LM 2000, LM 5000, LMABM 250
For rapid fine grinding down
to analytical fineness of hard,
brittle and fibrous materials
Start/Stop
CE-conforming
LM 2000
LM 5000
LMABM 250
LAARMANN
Ring Mills
Ring Mills for the fine grinding of hard to brittle and fibrous material
The LAARMANN ring mills LM 2000 and LM 5000 as well as LMABM 250 are essential for all applications
which demand the grinding of hard, brittle and fibrous material down to analytical endfineness.
Method of operation
With a LAARMANN Ring Mill you put the sample together with a disc or a set of rings and roller in a bowl
to bring it all together into 3-dimensional vibrations. Inside the bowls the sample will be ground and homogenized by high pressure, impact and friction rapidly down to analytical endfineness.
Typically samples are ground to 90-95% <75m in app. 3 minutes.
The cabinet has a drawer to collect dust and fallen sample material.
Additionally the cabinet could be separated from the vibrating unit very easily for service.
90m
106m
250m
The work space for grinding sets is made from stainless steel, optional built
with a pneumatic or manual (only LM 2000) lid clamping system as well as
a safety switch.
LMABM 250
The LM ABM 250 is designed for the continuous grinding of samples down to an endfineness <100m.
The grinding process is controlled by an electronic control. The control could be operated via an easy to use display. All steps of the process can be programmed and controlled.
The sample material can be feed via the infeed hopper on top of the cabinet and is
blown out of the bowl at the end of the process automatically. The ground material is
then provided by an integrated sample divider.
LAARMANN
Innovators in Solids
Applications
Minerals / ores / slags
Cement / cement clinker / concrete
Glass / ceramics / corundum
Coal / coke / drill core
Accessories
LAARMANN bowls, rings and rings are available in various materials as follows:
Chrome steel
Hardened steel
Tungsten carbide
Silicon nitride
Zirconia
Stainless Steel
grinding set
Model
LM 2000
LM 5000
LMABM 250
Feed size
<20 mm
<20 mm
<10 mm
End-fineness
<40 m
<40 m
<40 m
Throughput
20g - 1.500g
3.500g
20g - 800g
integrated solution
2,2 KW
4,0 KW
2,2 KW
Speed
LAARMANN
Innovators in Solids
www.laarmann.eu