Академический Документы
Профессиональный Документы
Культура Документы
Assumptions
Out of Scope
Prepared By
Prepared Date
Last Updated
Author Signature and
Contact Information
This document covers the information how to install virtual machine and describes
the settings required to configure the network between guest and host operating
system
Host Operating System: Windows 7
Guest Operating System: Linux Red Hat 5.4.8
This Guide is written assuming that you know how to install Linux and you want to
configure your Linux for Apps installation.
Installation of Linux is out of scope
Syed Farhan Ashraf
June 7, 2013
June 7, 2013
Learn Share and Grow
farhanashraf.ilm@gmail.com
5. Select he guest operating system as Linux and select the version below. As I am going to install
Linux 5.4 update 8, so I have selected Red Hat Linux Version 5.
Alternatively if you select the first radio button in above screenshot and Linux CD is in the CD
ROM, System will automatically select the Linux Version.
6. Provide the location to install the OS and give the name and press NEXT
Learn Share and Grow
7. Privide the space required along with radio option selected to make VM in one single file
8. Click Finish
9. Click Edit Setting and make the RAM Size as per your system.
10. Make sure to select following settings for network adaptor
the ethernet
Configure the IP as given below. Make sure that you configure the IP in same scheme as you have used
while configuing the Microsoft Loop Back Adaptor.
Click
OK.
Go to location /etc
10
11
Once you save it, this entry will be visible in HOSTS tab on network screen as follows.
12
Now search for the hosts file in host operating system. Navigation of this file is as follows
13
14
C:/Windows/
System32/Drivers/etc
And edit the hosts file in host operating system as follows. You need to add the entry of guest operating
system IP as follows
At this point of time, all configurations are done and both machines should ping each other.
15
16