Академический Документы
Профессиональный Документы
Культура Документы
constructive solutions
Airport hardstands
Taxiways
All cut backs should be allowed to dry out. oil spots should
be thoroughly cleaned off by scraping, and if necessary by
using an alkali-based heavy-duty detergent.
Refuelling areas
Advantages
Application
Description
Fosroc Topseal is a blend of emulsified coal tar and selected
fillers, suitable for application with a squeegee.
Standards Compliance
When the first coat is dry and tack free, the second coat is
applied at right angles to the first coat.
Specification
Fosroc Topseal
Cleaning
Colour
Specific Gravity
UV resistance
Fuel resistance
Cure time
Trafficable
Viscocity
:
:
:
:
:
:
:
Black
1.24
Excellent
Excellent
60 mins @ 20C
5-6 hours @ 20C
230 poise
Technical support
Additional Information
Estimating
Supply
Fosroc Topseal
1 litre/m/coat
(two coat application
required)
Coverage
Fosroc Topseal
Storage
fluid micro-concretes
0
Precautions
Health and safety
Fosroc Topseal has a coal tar base, which may cause skin
irritation. Avoid prolonged and repeated contact with skin. At
all times wear suitable overalls, eye protection and gloves
during application. All exposed skin should be protected with
barrier cream. If material gets into eyes consult medical
attention immediately.
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply
of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that any advice, recommendation,
specification or information it may give is accurate and correct, it cannot, because it has no direct or continuous control over where or
how its products are applied, accept any liability either directly or indirectly arising from the use of its products, whether or not in
accordance with any advice, specification, recommendation or information given by it.
www.fosroc.com
ME/22020/03/B