Академический Документы
Профессиональный Документы
Культура Документы
NOV Downhole is the largest independent downhole tool and equipment provider in the
world. We have the expertise to optimize BHA selection and performance, supporting over 150
locations in more than 80 countries.
Our complete range of solutions for the bottom hole assembly and related equipment includes:
Drill Bits
Drilling Motors
Borehole Enlargement
Drilling Tools and Products
Coring Services
Fishing Tools
Intervention and Completion Tools
Service Equipment
Advanced Drilling Solutions
We take pride in delivering superior performance and reliability. Our objective is to exceed our
customers expectations, improve their economics and be an integral part of their strategies.
DRILLING MOTORS
Table of Contents
Introduction
Introduction .....................................................................................Page 4
Drilling Motor Sub-Assembly Description
Drilling Motor Sub-Assembly Description ......................... Pages 4 - 5
Drilling Motors Product Offering
Drilling Motors Product Offering .....................................................Page 6
HEMIDRIL Drilling Motors
HEMIDRIL Drilling Motors ........................................................ Page 7
PowerPLUS Drilling Motors
PowerPLUS Drilling Motors .................................................... Page 8
Vector Drilling Motors
Vector Drilling Motors ............................................................ Page 9
Short Radius Drilling Motors
Short Radius Drilling Motors ................................................... Page 10
Coiled Tubing Motors
Coiled Tubing Motors............................................................... Page 11
CT PowerPLUS Motors
CT PowerPLUS Motors.......................................................... Page 12
CT HEMIDRIL Motors
CT HEMIDRIL Motors ............................................................ Page 13
Bottom-End Options
Bottom-End Options ............................................................... Page 14
NOV Motors Nomenclature
NOV Motors Nomenclature ..................................................... Page 15
Power Section Options
Power Section Options .................................................. Pages 16 - 17
Operating Adjustable Housings
Operating Adjustable Housings ............................................. Page 18
NOV Downhole Solutions
NOV Downhole Solutions ....................................................... Page 19
Introduction
The increased reliability of drilling motors, in combination with improved drill bit designs and measurement while drilling (MWD) systems,
present operators with enhancements to rotary drilling in an increasing number of applications. It is generally acknowledged that an effective
drilling motor, matched to the drill bit and formation, provides better rates of penetration than rotary drilling alone. In addition to increasing
rate of penetration, a drilling motor allows a reduction in drillstring rotary RPM which reduces wear and tear on the casing, the drillstring,
and other rotating topside components. A properly configured bottom hole assembly (BHA) also allows for effective directional control of
the wellbore.
The main sub assemblies of a drilling motor include the power section, adjustable or fixed housing, driveshaft, and the bearing assembly.
The power section offers a wide range of bit speeds and torque outputs. With recent improvements in elastomer technology and
manufacturing techniques, the power section can be tailored to function in high bottom hole temperatures and invert mud systems.
The adjustable or fixed housing and driveshaft are located between the power section and the bearing assembly, and are engineered
to withstand the increased torque rating of power sections.
As drilling programs become more complex and drilling distances push further, NOV Downhole engineers its bearing assemblies to
withstand higher loads and torque, while increasing its reliability and longevity. NOV Downhole offers both oil and mud lubricated
bearing assemblies.
Your NOV Downhole representative will gladly assist you in selecting the most appropriate motor for your drilling
application. Please consider the following questions when ordering your equipment:
What is the drilling APPLICATION?
Straight, Directional, Performance (Vertical), Horizontal, Extended Reach, Borehole Enlargement, Coring, and Coiled Tubing
Shallow Wells (up to 3,000ft), Intermediate (5,000 7,500ft), Deep (7,500 12,000ft), Ultra Deep (16,000ft +), Offshore Shelf, Offshore Deepwater
High Pressure, High Temperature, Corrosive, High Chlorides, Oil Based Mud
Rate of Penetration (ROP) Requirements, Directional Controls, Stabilization Requirements, Dogleg Severity
Build a BHA
Consider these additional products from NOV Downhole when making your equipment decisions:
Drill Bits
Drill Collars
Reamers
Drilling Jars
Shock Tools
Agitator Tools
Stabilizers
DRILLING MOTORS
Drilling Motor Sub-Assembly Description
NOV Downhole offers the most versatile array of downhole motors available for straight or directional drilling. Rotary power is produced by a
Moineau positive displacement progressing cavity power section. Power sections offer a wide range of bit speeds and torque ratings and can
be tailored to function in both high bottom-hole temperatures and inverted mud systems. Motors are available with a fixed or an adjustable
bent housing located between the motor and the bearing assembly. The adjustable housing is easily adjustable at the wellsite from straight
to a 3o bend in 12 increments, or a 4o bend in 18 increments.
Most motors have an optional near bit stabilizer. Concentric or
eccentric stabilizers can also be provided to stabilize the top or
middle of the motor. NOV Downhole manufactures motors that range
from 1v to 114 diameter.
5. Bearing Assembly:
1
(Not shown)
3. Driveshaft Assembly:
2. Power Section:
Rotational power is provided by a Moineau
progressing cavity positive displacement
power section. Power sections are available
in many flow, speed, and torque ranges to
fit any drilling environment. Different rotor/
stator fits as well as advanced elastomers
are available to help cope with high down
hole temperatures and invert muds.
6. Bearing Mandrel:
The Bearing Mandrel has a large crosssection providing extra strength and reduces
the deflection and stress. This allows the
motor to be rotated in the hole with the
reduced likelihood of fatigue induced
failures. NOV Downhole motors are available
with high-torque bearing mandrels, designed
to handle high torque power sections.
7. Stabilization:
4. Adjustable Assembly:
The adjustable assembly connects the
stator to the bearing assembly and encloses
the driveshaft assembly. The angle setting
is field adjustable to produce a wide range
of build rates. The adjustable assembly is
available as 3o and 4o options. The Downhole
adjustable assembly is made up of four
components and is thus simple to service
and maintain. The design allows for a large
internal diameter and thus enables a larger
driveshaft diameter to be assembled.
CT PowerPLUS Motor
Utilizes high performance elastomer that
delivers 50% more power and torque
than traditional power sections.
Ideal for coiled tubing workover
applications such as vertical deepening,
milling, de-scaling or de-waxing of
production tubing, windows, cement
plugs and under-balanced drilling.
CT HEMIDRIL Motor
DRILLING MOTORS
HEMIDRIL Drilling Motors
The HEMIDRIL Drilling Motor offers the highest power and torque output by utilizing even wall technology.
The power section consists of a steel supported core with flexible multi-body construction, an even thickness
elastomer, and Power Rib technology. These features combine to deliver increased torque, power, and
efficiency that are required in challenging drilling environments.
The HEMIDRILs steel supported core allows for increased differential pressure across each stage over the
length of the power section. The constant elastomer thickness reduces fluid leakage and heat build up. The
Power Rib technology further increases the seal efficiency which improves the conversion of pressure to
torque and power.
Delivering an increased rate of penetration at a consistent RPM, the HEMIDRIL is ideally suited for challenging
drilling environments including high temperatures and invert mud systems.
Features
Benefits
Min Flow
Max Flow
Size
Configuration
Max Bit
Speed
rev/gal
rev/l
gpm
lpm
gpm
lpm
lb-ft
N-m
psi
kPa
130
0.52
0.137
160
610
250
950
4,480
6,070
865
5,960
245
0.97
0.256
100
380
250
950
3,830
5,190
1,435
9,890
64
85
0.17
0.045
200
760
500
1,890
9,750
13,211
660
4,550
64
136
0.34
0.090
160
610
400
1,510
8,450
11,450
1,090
7,510
6d
180
0.30
0.079
300
1,140
600
2,270
6,510
8,821
685
4,720
6d
180
0.30
0.079
300
1,140
600
2,270
10,830
14,675
1,140
7,850
6d
102
0.17
0.045
300
1,140
600
2,270
12,955
17,554
900
6,200
153
0.16
0.042
300
1,140
900
3,410
15,155
20,535
910
6,270
9s
132
0.11
0.029
600
2,270
1,200
4,540
26,160
35,447
1,090
7,510
114
132
0.11
0.029
600
2,270
1,200
4,540
26,160
35,447
1,090
7,510
NOV Downhole will assist you in selecting the appropriate products to build your bottom hole assembly.
Contact your NOV Downhole representative for more information, and to confirm that your selected tools
match your drilling program.
Benefits
Bearing Assembly
Features
Standard Sizes:
32 inches to 9s inches
NOV Downhole will assist you in selecting the appropriate products to build your bottom hole assembly.
Contact your NOV Downhole representative for more information, and to confirm that your selected tools
match your drilling program.
DRILLING MOTORS
Vector Drilling Motors
The Vector Drilling Motor is considered a standard within the industry and is the motor of choice for
conventional drilling applications. The motor is available in an array of power section configurations that
deliver the desired speeds and torque. Furthermore, it is configured with an adjustable or fixed housing and
an oil or mud lubricated bearing assembly.
The Vector Drilling Motor is readily available and cost effective. It is a reliable tool that has a minimum number
of components and is simple and efficient to service. In addition, it is backed by NOV Downhole sales,
engineering, manufacturing, and operations support.
Features
Benefits
Adjustable or fixed housing option
Bearing Assembly
Stabilization options
Standard Sizes:
32 inches to 114 inches
NOV Downhole will assist you in selecting the appropriate products to build your bottom hole assembly.
Contact your NOV Downhole representative for more information, and to confirm that your selected tools
match your drilling program.
Benefits
Features
Short bit-to-bend length
3o or 4o adjustable offering
reach horizontal
components
power sections
NOV Downhole will assist you in selecting the appropriate products to build your bottom hole assembly.
Contact your NOV Downhole representative for more information, and to confirm that your selected tools
match your drilling program.
10
CT MOTORS
Coiled Tubing Motors
Designed specifically for coiled tubing and slim hole drilling applications, the Coiled Tubing Motor provides
all the benefits of the Vector Drilling Motor, in outer diameters that are less than 4w inches.
This motor is used with coil tubing units for continuous drilling and workover applications such as vertical
deepening, milling, de-scaling or de-waxing of production tubing, windows, cement plugs, and underbalanced drilling.
Benefits
Consistent performance
Features
Standard Sizes:
1n inches to 32 inches
NOV Downhole will assist you in selecting the appropriate products to build your bottom hole assembly.
Contact your NOV Downhole representative for more information, and to confirm that your selected tools
match your drilling program.
11
CT PowerPLUS Motors
NOVs PowerPLUS Power sections utilize high performance elastomer that delivers 50% more power and
torque than traditional power sections. The elastomer has proven to perform remarkably in both water
based fluids and nitrogen; which makes this power section ideal for CT milling operations.
Extensive research and analysis was conducted by NOV Downhole to design and manufacture this
mpressive addition to our power sections. This included:
Elastomer formulation testing
Endurance testing
Field testing
The results of extensive testing provided the strong base for the PowerPLUS Power section; another quality
National Oilwell Varco solution for the coiled tubing industry.
Features
Benefits
power sections
drilling
Less stress on the coiled tubing
Reduced operational cost
Standard Sizes:
2d inches to 38 inches
NOV Downhole will assist you in selecting the appropriate products to build your bottom hole assembly.
Contact your NOV Downhole representative for more information, and to confirm that your selected tools
match your drilling program.
12
CT MOTORS
CT HEMIDRIL Motors
The HEMIDRIL coiled tubing motor has been developed to meet industry demand for aggressive, high
torque, low speed drilling requirements. NOVs high performance CT HEMIDRIL Power sections are ideal
for straight hole and lateral coiled tubing milling and drilling operations. The HEMIDRIL power section has
a steel supported core with flexible multi-body construction, even elastomer thickness, and Power Rib
technology.
The CT HEMIDRIL utilizes the same Evenwall Technology that NOV has used with success for years in the
well-respected HEMIDRIL Drilling Motors. This evenwall stator includes a patented Power Rib surface that
improves efficiency and tool life. The uniform elastomer thickness, thin wall design, and power rib technology
combine to deliver increased torque, horsepower, and efficiency. CT HEMIDRIL Power sections have proven
to withstand the harsh conditions that often plague coiled tubing operations.
Features
Benefits
Size
2d
Configuration
(rev/gal / rev/l)
20 gpm / 80 lpm
Cut-away of CT HEMIDRIL
with Power Rib Technology
CT HEMIDRIL Motors
Standard Sizes:
2d inches
NOV Downhole will assist you in selecting the appropriate products to build your bottom hole assembly.
Contact your NOV Downhole representative for more information, and to confirm that your selected tools
match your drilling program.
13
Bottom-End Options
ST3 Sealed Bearing Technology - (HEMIDRIL-ST3, PowerPLUS-ST3, Vector-ST3, DuraPower-ST3)
NOV ST3 Sealed Bearing Technology (previously known as the Series 36 bearing assembly) uses the strongest and most versatile sealed
bearing assemblies in the NOV fleet. This is a fully sealed bearing assembly 100% of the drilling fluid passes directly to the bit with no loss
via flow restrictors, so bit hydraulics are maximized.
Features
Benefits
Sealed, oil-lubricated bearing assembly
100% of the fluid exits at the bearing mandrel bit box
No-bypass design: 100% flow to bit
Full flow to bit yields:
Ultra-Duty bearing mandrel for high torque power sections - Better bit and hole cleaning
Pin-down bearing mandrels available - Increased ROP
Optional BlackBox pocket on bearing mandrel - Better bit life
Ball-type driveshaft assembly
Ideal for rotary steerable applications:
- Full flow to power rotary steerable
- No signal loss when running MWD pulser below motor
Handles abrasive drilling fluids better no flow restrictor wear
Best option for air drilling not relying on mud to lubricate bearings
NOV ST2 Sealed Bearing Technology (previously known as Series 24 / 24X bearing assemblies) and ST2H (previously known as Series
24XH bearing assemblies) are capable of withstanding radial and axial loads similar to the ST3 assemblies. This design incorporates the
use of flow restrictors to balance the lower rotary seals and therefore bypasses a small percentage of drilling fluid away from the bit. They
have logged over 4 million hours of successful drilling since year 2000.
NOV ST1 Sealed Bearing Technology (previously known as Series 14 / 17 bearing assemblies) also incorporates the use of flow restrictors
to balance the lower rotary seals and therefore bypasses a small percentage of drilling fluid away from the bit. This technology has also been
used successfully for many years and smaller sizes are still regularly used.
DRILLING MOTORS
NOV Motors Nomenclature
Naming Structure
PowerPLUS ST 3
Product Family:
Version Number:
Vector
ST Sealed Technology
Current Generation 3
PowerPLUS
ML Mud lubricated
HEMIDRIL
SR Short Radius
DuraPower*
CT Coiled Tubing
2H Series 24XH
*Each of the bottom-end technologies are available for order without a power section. This configuration of a motor bottom-end, without a power section, is named DuraPower.
Cross Reference
The table below shows the cross reference between series numbers and the new convention.
Sealed Technology
Series
Numbers
14, 17,
24, 24X
24XH
36
Mud Lubricated
New
Name
ST1
ST2
ST2H
ST3
Short Radius
Series
Numbers
33
Not Used
New
Name
ML1
ML2
Series
Numbers
20
Not Used
New
Name
SR1
SR2
40
ML3
39
SR3
CT1
CT2
CT3
15
Size
Configuration
CT Power Sections
1n - 38
Size
16
Lobe
Config
No. of
Stages
gpm
lpm
Maximum
Bit Speed
RPM
Rev / Unit
Volume
rev/gal
Standard Max
Differential Pressure
Rev/L
psi
kPa
Torque @ Max
Pressure
lb-ft
N-m
PowerPLUS Max
Differential Pressure
psi
kPa
PowerPLUS Torque
@ Max Pressure
lb-ft
N-m
1n
5/6
4.4
45
170
503
11.2
3.0
675
4,650
152
210
1,010
6,960
230
310
1n
5/6
5.0
45
170
720
16.0
4.2
750
5,170
115
160
1,130
7,790
170
230
28
5/6
6.0
50
190
639
12.8
3.4
900
6,210
110
150
1,350
9,310
170
230
2d
5/6
3.5
120
450
372
3.10
0.82
505
3,480
315
430
760
5,240
470
640
2d
5/6
4.7
125
470
470
3.76
0.99
680
4,690
431
580
1,020
7,030
650
880
38
7/8
3.0
140
530
252
1.80
0.47
460
3,170
660
890
660
4,760
990
1,340
3a
4/5
5.0
120
450
408
3.40
0.90
750
5,170
570
770
1,130
7,790
860
1,170
3a
7/8
3.0
120
450
188
1.56
0.41
460
3,170
782
1,060
690
4,760
1,170
1,590
3w
4/5
3.5
160
610
250
1.56
0.41
520
3,590
918
1,240
780
5,380
1,380
1,870
3w
5/6
5.0
160
610
242
1.51
0.40
725
5,000
1,055
1,430
1,090
7,520
1,580
2,140
3w
6/7
3.0
200
760
160
0.80
0.21
440
3,030
1,314
1,780
660
4,550
1,970
2,670
3w
7/8
2.0
160
610
89
0.56
0.15
295
2,030
1,311
1,780
440
3,030
1,970
2,670
3w
7/8
2.3
160
610
122
0.76
0.20
350
2,410
1,124
1,520
530
3,650
1,690
2,290
4w
2/3
8.0
260
980
516
1.99
0.52
1135
7,830
1,428
1,940
1,700
11,720
2,140
2,900
4w
4/5
3.5
250
950
267
1.07
0.28
520
3,590
1,218
1,650
780
5,380
1,830
2,480
4w
4/5
6.0
250
950
253
1.01
0.27
840
5,790
2,011
2,730
1,260
8,690
3,020
4,090
4w
4/5
6.3
250
950
253
1.01
0.27
955
6,580
2,286
3,100
1,430
9,860
3,430
4,650
4w
5/6
8.3
300
1,140
326
1.09
0.29
1,190
8,200
3,207
4,350
1,790
12,340
4,810
6,520
3,670
4w
7/8
2.0
250
950
80
0.32
0.08
280
1,930
1,806
2,450
420
2,900
2,710
4w
7/8
2.2
250
950
137
0.55
0.14
335
2,310
1,479
2,010
500
3,450
2,220
3,010
4w
7/8
2.9
250
950
83
0.33
0.09
405
2,790
2,791
3,780
610
4,210
4,190
5,680
4w
7/8
3.8
250
950
131
0.52
0.14
535
3,690
2,332
3,160
800
5,520
3,500
4,750
6/7
6.0
350
1,320
303
0.87
0.23
860
5,930
2,372
3,220
1,290
8,890
3,560
4,830
6/7
7.0
350
1,320
302
0.86
0.23
1,005
6,930
2,895
3,930
1,510
10,410
4,340
5,880
6/7
8.0
350
1,320
302
0.86
0.23
1,215
8,380
3,500
4,750
1,820
12,550
5,250
7,120
64
4/5
7.5
400
1,510
276
0.69
0.18
1,070
7,380
4,065
5,510
1,610
11,100
6,100
8,270
64
5/6
5.5
500
1,890
232
0.46
0.12
800
5,520
4,675
6,340
1,200
8,270
7,010
9,500
64
7/8
2.8
400
1,510
131
0.33
0.09
425
2,930
2,784
3,770
640
4,410
4,180
5,670
64
7/8
2.9
500
1,890
82
0.16
0.04
425
2,930
6,277
8,510
640
4,410
9,420
12,770
64
7/8
4.8
400
1,510
131
0.33
0.09
700
4,830
4,773
6,470
1,050
7,240
7,160
9,710
62
1/2
4.0
500
1,890
535
1.07
0.28
480
3,310
1,296
1,760
720
4,960
1,940
2,630
62
8/9
4.0
500
1,890
145
0.29
0.08
605
4,170
4,674
6,340
910
6,270
7,010
9,500
6w
2/3
7.0
600
2,270
510
0.85
0.22
945
6,520
2,933
3,980
1,420
9,790
4,400
5,970
6w
4/5
4.8
600
2,270
304
0.51
0.13
695
4,790
3,394
4,600
1,040
7,170
5,090
6,900
6w
4/5
7.0
600
2,270
311
0.52
0.14
1,015
7,000
4,820
6,540
1,520
10,480
7,230
9,800
6w
5/6
6.8
600
2,270
246
0.41
0.11
970
6,690
6,039
8,190
1,460
10,070
9,060
12,280
6w
6/7
5.0
600
2,270
186
0.31
0.08
715
4,930
5,699
7,730
1,070
7,380
8,550
11,590
15,670
6w
6/7
6.0
600
2,270
186
0.31
0.08
925
6,380
7,708
10,450
1,390
9,580
11,560
6w
7/8
2.0
500
1,890
87
0.17
0.05
280
1,930
4,051
5,490
420
2,900
6,080
8,240
6w
7/8
2.9
500
1,890
84
0.17
0.04
425
2,930
6,135
8,320
640
4,410
9,200
12,470
6w
7/8
3.0
600
2,270
172
0.29
0.08
460
3,170
3,830
5,190
690
4,760
5,740
7,780
6w
7/8
5.0
600
2,270
174
0.29
0.08
720
4,960
5,972
8,100
1,080
7,450
8,960
12,150
6w
7/8
5.7
600
2,270
150
0.25
0.07
845
5,830
8,204
11,120
1,270
8,760
12,310
16,690
6w
7/8
6.4
600
2,270
183
0.31
0.08
995
6,860
7,580
10,280
1,490
10,270
11,370
15,420
6w
8/9
3.0
500
1,890
150
0.30
0.08
455
3,140
4,418
5,990
680
4,690
6,630
8,990
2/3
8.3
600
2,270
939
1.57
0.41
1,135
7,830
1,881
2,550
1,700
11,720
2,820
3,820
7/8
6.0
600
2,270
199
0.33
0.09
885
6,100
6,437
8,730
1,330
9,170
9,650
13,080
7/8
7.5
600
2,270
186
0.31
0.08
1,120
7,720
8,508
11,530
1,680
11,580
12,760
17,300
DRILLING MOTORS
Power Section Options
Maximum
Flow Rate
Size
Configuration
Size
Lobe
Config
No. of
Stages
gpm
lpm
Maximum
Bit Speed
RPM
Rev / Unit
Volume
rev/gal
Rev/L
Standard Max
Differential Pressure
psi
kPa
Torque @ Max
Pressure
lb-ft
N-m
PowerPLUS Max
Differential Pressure
psi
kPa
PowerPLUS Torque
@ Max Pressure
lb-ft
N-m
7w
4/5
3.6
900
3,410
226
0.25
0.07
520
3,590
5,106
6,920
780
5380
7660
10,390
7w
4/5
5.3
900
3,410
230
0.26
0.07
750
5,170
7,029
9,530
1,130
7,790
10,540
14,290
7w
5/6
5.0
900
3,410
257
0.29
0.08
700
4,830
5,529
7,500
1,050
7,240
8,290
11,240
7w
6/7
4.0
900
3,410
159
0.18
0.05
565
3,900
7,783
10,550
850
5,860
11,680
15,840
7w
7/8
2.0
900
3,410
106
0.12
0.03
295
2,030
6,055
8,210
440
3,030
9,080
12,310
7w
7/8
3.0
900
3,410
152
0.17
0.04
460
3,170
6,604
8,950
690
4,760
9,910
13,440
16,950
7w
7/8
4.0
900
3,410
149
0.17
0.04
570
3,930
8,333
11,300
860
5,930
12,500
5/6
3.0
900
3,410
279
0.31
0.08
435
3,000
3,436
4,660
650
4,480
5,150
6,980
6/7
5.0
900
3,410
159
0.18
0.05
715
4,930
9,618
13,040
1,070
7,380
14,430
19,560
9s
2/3
7.5
1,200
4,540
590
0.49
0.13
1040
7,170
5,853
7,940
1560
10,760
8,780
11,900
9s
3/4
4.5
1,200
4,540
260
0.22
0.06
615
4,240
7,184
9,740
920
6,340
10,780
14,620
9s
3/4
6.0
1,200
4,540
251
0.21
0.06
830
5,720
8,849
12,000
1,250
8,620
13,270
17,990
9s
5/6
3.0
1,200
4,540
133
0.11
0.03
410
2,830
8,988
12,190
620
4,270
13,480
18,280
9s
5/6
4.0
1,200
4,540
132
0.11
0.03
555
3,830
11,865
16,090
830
5,720
17,800
24,130
9s
6/7
5.0
1,200
4,540
156
0.13
0.03
715
4,930
12,881
17,460
1,070
7,380
19,320
26,190
9s
6/7
6.0
1,200
4,540
155
0.13
0.03
880
6,070
15,775
21,390
1,320
9,100
23,660
32,080
114
3/4
3.6
1,500
5,680
179
0.12
0.03
505
3,480
12,174
16,510
760
5,240
18,260
24,760
114
6/7
5.5
1,800
6,810
162
0.09
0.02
820
5,650
19,368
26,260
1,230
8,480
29,050
39,390
114
6/7
5.6
1,800
6,810
162
0.09
0.02
820
5,650
19,377
26,270
1,230
8,480
29,060
39,400
2d
5/6
3.5
120
450
400
3.33
0.88
883
6,090
644
870
4/5
6.3
250
950
245
0.98
0.26
1435
9,890
3,830
5,190
7/8
3.8
250
950
130
0.52
0.14
865
5,960
5,964
8,090
64
7/8
2.9
500
1,890
85
0.17
0.04
660
4,550
9,750
13,220
64
7/8
4.8
400
1,510
136
0.34
0.09
1,090
7,520
8,451
11,460
6d
7/8
2.9
600
2,270
102
0.17
0.04
900
6,210
12,955
17,560
6d
7/8
3.0
600
2,270
180
0.30
0.08
685
4,720
6,510
8,830
6d
7/8
5.0
600
2,270
180
0.30
0.08
1,140
7,860
10,830
14,680
7/8
4.0
900
3,410
153
0.17
0.04
910
6,270
15,155
20,550
9s
7/8
4.8
1,200
4,540
132
0.11
0.03
1,090
7,520
26,160
35,470
114
7/8
4.8
1,200
4,540
132
0.11
0.03
1,090
7,520
26,160
35,470
17
Power Section
Power Section
Lock Housing
Lock Housing
Power Section
Apply thread dope
to this face before
retorquing
Lock Housing
Tong Area
3.00
2.12
2.60
2.38
2.38
2.77
2.90
2.60
2.12
2.90
3.00
2.98
Adjusting Ring
2.98
1.15
0.39
0
0.78
1.50
0.78
0.39
1.83
1.15
1.50
1.15
1.83
0.39
0
0.78
1.50
0.78
0.39
1.83
1.15
1.50
Wear Pad
1.83
Adjusting Ring
Adjusting Ring
Tong Area
Offset Housing
Figure 1
Break joint with tongs on tong areas
Keep adjusting ring engaged with offset
housing and back off lock housing 2 turns
Note: Teeth must stay engaged during
the back-off procedure
Offset Housing
Figure 2
Figure 3
18
Offset Housing
DOWNHOLE SOLUTIONS
NOV Downhole Offerings
Drilling Motors
Drilling Tools
Agitator Tools
Drilling Jars
Anderdrift Tools
Drilling Jar Intensifier Tools
Bi-Center Bits
TuffCutter Bits
Coring Services
Bowen Fishing Tools
Conventional Coring
Accessory Tools
Ultra CT Jars
CT Agitator Tools
Borehole Enlargement
PCE/Progressive CT Tools
CT Motors
CT HEMIDRIL Motors
CT PowerPLUS Motors
Connection Tools
Product Testing
Workshop Accessories
19
Downhole Solutions
Drilling Solutions
Corporate Headquarters
7909 Parkwood Circle Drive
Houston, Texas 77036
United States
Phone: 713 375 3700
Fax: 713 346 7687
Production Solutions
National Oilwell Varco has produced this brochure for general information only, and it is not
intended for design purposes. Although every effort has been made to maintain the accuracy and
reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any
loss, damage or injury resulting from the use of information and data herein. All applications for the
material described are at the users risk and are the users responsibility.
All brands listed are trademarks of National Oilwell Varco.
w w w. n o v. c o m
2011 National Oilwell Varco
D391000197-MKT-001 Rev.08