Академический Документы
Профессиональный Документы
Культура Документы
ATLAS LOCATIONS:
San Diego: Corporate Office
4640 Brinell St.
San Diego, CA 92111
(858) 277-2100
fax (858) 277-0585
Los Angeles
2745 Raymond Ave.
Signal Hill, CA 90755
(562) 595-1006
fax (562) 595-4117
Phoenix
1611 South 27th Ave.
Phoenix, AZ 85009
(602) 256-0600
fax (602) 256-0687
Las Vegas
4840 W. Hacienda Ave.
Las Vegas, NV 89118
(702) 227-6800
fax (702) 222-0488
Denver
4800 Race St.
Denver, CO 80216
(303) 298-7777
fax (303) 298-7778
San Francisco
(510) 353-0100
www.atlasform.com
Mexico
001 (877) 586-2100
MANUFACTURER
PRODUCTS
ABT, Inc.
BMD, Inc.
Chapin
Dayton Superior
Deslauries
Durajoint
Fortifiber Corp.
Greenstreak / Vinylex
Henry Co.
Hogan Company
McTech Group
Fiberglass Column Forms & Pans, Waffle Slab & Custom Forms.
Meadow Burke
Multiquip Construction Equipment
Forming Accessories, Snap Ties, Taper Ties, Coil Rod, Anchors, Inserts,
Rebar Supports & Other Accessories.
Pumps, Mixers, Power Trowels, Screeds & Generators.
Proline
Quikrete
Sonoco Products
Symons
TRM Manufacturing
Unitex
Concrete Accessories, Snap Ties, Taper Ties, Coil Rod, Anchors, Inserts,
Stakes, Dowels & Dowel Baskets.
Plywood, LVL, Lumber & Building Materials.
US Mix Products
Western Insulfoam
Weyerhaeuser / TrusJoist
W.R. Meadows
Chemicals, Expansion Joint & Plastics, Vapor Retarder & Paving Products.
www.atlasform.com
TABLE OF CONTENTS
GENERAL TERMS & SAFETY NOTES
10-FORMING
& SHORING
20-FORMING
ACCESSORIES
30-CHEMICALS
& REPAIR
40-REBAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
VOID FORM, AREA WELLS, FABRICATED STEEL POSTS & BEAMS, METAL DECKING.
INDEX
www.atlasform.com
70- FOUNDATION
www.atlasform.com
www.atlasform.com
Form Hangers
Anchoring Inserts
Used as Form Ties
Brace Anchors
Inserts
Lifting Inserts
Lifting Plates and
Related Items
Safety
Factor
2 to 1
2 to 1
3 to 1
Type of Construction
All applications
Formwork supporting form weight and concrete pressures only
Formwork supporting weight of forms, concrete construction live
loads and impact
2 to 1
2 to 1
All applications
2 to 1
3 to 1
2 to 1
4 to 1
5 to 1
Tilt-up construction
Precast concrete construction
Warning! When in doubt about the proper use or installation of Atlas Construction Supplys accessories and
hardware, contact Atlas Construction Supply for clarification. Failure to do so may result in exposure of
workers to unsafe conditions or hazards, resulting in the possibility of injury or death to workers in the vicinity
of the jobsite.
www.atlasform.com
WARRANTY
Atlas Construction Supply will refund the price of or
replace, at its election, any product which it finds
to be defective provided the product has been
used properly. EXCEPT AS EXPRESSLY STATED
ABOVE, THE COMPANY MAKES NO WARRANTY
OF MERCHANTABILITY AND NO WARRANTY
OF FITNESS FOR ANY PARTICULAR PURPOSE
NOR DOES IT MAKE ANY WARRANTY, EXPRESS
OR, IMPLIED, OF ANY NATURE WHATSOEVER
WITH RESPECT TO THE PRODUCT OR THE
www.atlasform.com
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
Versatility
The versatility of the AL-SPEED Frame
allows for quick erection and dismantling of
simple and intricate deck layouts. The
AL-SPEED system also has fewer parts than
other shoring systems, therefore maximizing
productivity and minimizing jobsite losses/
thefts.
PRODUCTS
70- FOUNDATION
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING &
SHORING
www.atlasform.com
FORMING &
SHORING
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
10-FORMING
& SHORING
60-PRECAST
& TILT-UP
PRODUCTS
www.atlasform.com
70- FOUNDATION
Contractor Committed.
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING &
SHORING
LVL BEAMS
CROSSBRACES
PRODUCTS
6 x 28 Frame
6 x 5 Frame
6 x 6 Frame
70- FOUNDATION
60-PRECAST
& TILT-UP
FRAME SIZES
3x 28 Frame
10
3 x 5 Frame
www.atlasform.com
3 x 6 Frame
FORMING &
SHORING
20-FORMING
ACCESSORIES
TM
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
TM
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
SMALLER PRONG
USED PRIMARILY FOR
GRID JOIST.
PRODUCTS
www.atlasform.com
DROP-HEAD BOLTS TO
TOP OF POST SHORE.
70- FOUNDATION
STRIKE WEDGE
WITH HAMMER TO
ENGAGE AND
DISENGAGE.
10-FORMING
& SHORING
ATLAS A-DECKTM
11
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
Contractor Committed.
ATLAS A-DECKTM
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING &
SHORING
12
www.atlasform.com
FORMING &
SHORING
ATLAS A-DECKTM
TECHNICAL FEATURES
10-FORMING
& SHORING
ATLAS A-DECKTM
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
13
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING &
SHORING
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
14
www.atlasform.com
FORMING &
SHORING
10-FORMING
& SHORING
20-FORMING
ACCESSORIES
HIGH CAPACITY
SHORING SYSTEM
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
15
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING &
SHORING
30-ATLAS TECH
PRODUCTS
Trusses
In addition to handset decking systems, Atlas
offers flying deck forms and truss solutions for
repetitive, multi-reuse projects.
Trusses are available in variable height
aluminum or steel configurations. Joists are
typically aluminum beams.
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
Aluminum joists
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
16
www.atlasform.com
FORMING &
SHORING
20-FORMING
ACCESSORIES
COLUMN MOUNTED
TABLE FORMS
10-FORMING
& SHORING
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
17
10-FORMING
& SHORING
FORMING &
SHORING
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
Beam Forms
The beam forms feature long assemblies faced
with 3/16 steel skin plate for strength,
durability and excellent concrete finish. No tie
system or added beam bracing is required.
50-FLATWORK
ACCESSORIES
Capital Forms
All-steel capital forms are designed specifically for
typical exterior or pass-through interior locations.
Forms are steel-faced for smooth concrete finish
and include steel chamfer. Provisions for
post-tension cable penetrations are also included
in the capital form design.
PRODUCTS
60-PRECAST
& TILT-UP
Deck Panels
Deck panels are field-fabricated with a
template using wood or aluminum beams and
HDO plywood allowing spans up to 22-0
without center shoring. The HDO plywood deck
panels produce a consistently smooth concrete
finish and provide maximum reuse.
70- FOUNDATION
Contractor Committed.
18
www.atlasform.com
FORMING &
SHORING
20-FORMING
ACCESSORIES
PARKING STRUCTURE
FORM SYSTEM FOR
NON-TYPICAL BEAM SIZE
10-FORMING
& SHORING
AL-SPEED GARAGE
BEAM SYSTEM
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
19
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING &
SHORING
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Lightweight
Atlas offers this wallform system weighing
only 10 lbs./sq.ft. including 3/4 plywood skin,
utilizing high strength aluminum members for
both walers and strongbacks, and is offered for
applications where rapid cycling and/or
architectural surface finishes are required. The
Atlas tie plate allows strongback channels to
be set with a clear space of 3-1/2 between
webs, allowing more lateral tie bolt adjustment
than comparable systems.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
20
www.atlasform.com
FORMING &
SHORING
GANGED ALUMINUM
WALL FORMS
LIFTING LUG
10-FORMING
& SHORING
WALLFORM COMPONENTS
20-FORMING
ACCESSORIES
TIE PLATE
A-CLAMP
30-ATLAS TECH
PRODUCTS
ALUMINUM
BEAM
(6-1/2)
EDGE OF
PLYWOOD
40-BAR
SUPPORTS
ALUMINUM
STRONGBACK
(7-1/2)
50-FLATWORK
ACCESSORIES
PLAN VIEW
60-PRECAST
& TILT-UP
A-CLAMP
ASSEMBLY
ANGLE BRACKET
3 HOLE BRACE PLATE
PRODUCTS
CATWALK/SCAFFOLDING
BRACKET
LIFTING LUG
TIE PLATE
www.atlasform.com
70- FOUNDATION
BULK HEAD
BRACKET
21
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING &
SHORING
30-ATLAS TECH
PRODUCTS
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
22
www.atlasform.com
FORMING &
SHORING
GANGED LVL
WALLBEAM FORMS
LIFTING LUG
10-FORMING
& SHORING
WALLFORM COMPONENTS
20-FORMING
ACCESSORIES
YOKE BRACKET
EDGE OF
PLYWOOD
30-ATLAS TECH
PRODUCTS
ALUMINUM
STRONGBACK
(7-1/2)
LVL WALLBEAM
(5-1/2)
TIE PLATE
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
PLAN VIEW
60-PRECAST
& TILT-UP
YOKE BRACKET
ANGLE BRACKET
PRODUCTS
BULK HEAD
BRACKET
CATWALK/SCAFFOLDING
BRACKET
TIE PLATE
www.atlasform.com
70- FOUNDATION
LIFTING LUG
23
10-FORMING
& SHORING
FORMING &
SHORING
Contractor Committed.
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
With all this activity being possible at the working level, the
form never needs to be brought to ground level or stored
elsewhere while decking activity is proceeding. With this
system, it is no longer necessary for unacceptably lengthy
crane-intensive hoisting operations to take place. Neither
is it necessary for workers to ride the forms during
re-setting, as the gang/platform unit is hoisted as one and
landed into previously mounted jump shoes. Hoisting time
is extremely brief.
24
www.atlasform.com
FORMING &
SHORING
10-FORMING
& SHORING
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
SCREWJACK
ROLL BACK
CARRIAGE
JUMP
SHOE
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
STRONGBACK
CONNECTORS
PRODUCTS
A-100
BRACKET
WIND
TIE
PLAN VIEW
www.atlasform.com
25
TRAILING
SCAFFOLDING
70- FOUNDATION
JUMP
SHOE
PLATFORM
BEAM
60-PRECAST
& TILT-UP
ROLL BACK
CARRIAGE
A-100
BRACKET
Contractor Committed.
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
10-FORMING
& SHORING
FORMING &
SHORING
10 ft
PRODUCTS
8 x 10 ACS Panel
70- FOUNDATION
60-PRECAST
& TILT-UP
8 ft
26
www.atlasform.com
FORMING &
SHORING
10-FORMING
& SHORING
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
ACS Accessories
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
THERMOPLASTIC
COATING
ALUMINUM
70- FOUNDATION
FOAMED
THERMOPLASTIC CORE
www.atlasform.com
27
MODULAR WALLFORM
STRAIGHT & RADIUS
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
Horizontal or vertical
Alisply forms can be used horizontally or vertically,
even within the same gang without compromising
strength. Alisply has the strength required for the large
contact areas and fast pour rates common in large
gangform applications. With a design pressure of 1230
lbs/sq.ft., only two ties are needed for 3 meter panel
heights.
PRODUCTS
60-PRECAST
& TILT-UP
Simple connections
The Alisply system features simple clamp connections
that eliminate the need for tools and aligning bars.
Setting up or changing the configuration of gangs
is fast and simple with these innovative attachment
clamps, reducing assembly confusion, increasing
productivity and simplifying the gangforming
operations.
Alisply Circular
Alisply Circular is a recoverable modular formwork
system for circular fair-faced concrete walls,
designed to be handled with a crane. Alisply Circular
consists of a light galvanized steel frame and a 15 mm
thick phenolic plywood lining. The frame incorporates
tie rods that allow giving the wall the required radius
on site.
70- FOUNDATION
Contractor Committed.
ALISPLY
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING &
SHORING
28
www.atlasform.com
FORMING &
SHORING
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
FLEX-FORM SYSTEM
60-PRECAST
& TILT-UP
PRODUCTS
Panels are delivered to the job site preassembled to meet specific job requirements.
Flex-Form panels are available in over 100
sizes, from 2 wide by 1 long to 10 wide by 20
long and are available on a sale or rental basis.
70- FOUNDATION
www.atlasform.com
10-FORMING
& SHORING
29
30-ATLAS TECH
PRODUCTS
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
PRODUCTS
60-PRECAST
& TILT-UP
70- FOUNDATION
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING &
SHORING
30
www.atlasform.com
FORMING &
SHORING
HANDSET WALLFORMS
10-FORMING
& SHORING
STEEL-PLY
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
31
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING &
SHORING
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
ATLAS MULTI-CHANNEL
COLUMN FORMS
32
www.atlasform.com
FORMING
ACCESSORIES
10-FORMING
& SHORING
COLUMN FORMING
ONE PIECE ROUND COLUMN FORMS
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
Heavy Duty Steel Column forms develop an exceptionally smooth, hard surface
free of voids and with a minimum number of indistinct seams. All forms are
galvanized constant radius steel half round sections and quarter round
sections (for forms over 48 in diameter) bolted into units for crane handling on
the job site. Each component is framed with flange angles diecut and punched
for accurate flush butt joints without protrusion on the contact surface. Vertical
and horizontal seams, opened and closed with each pour, are connected with
high speed bolts to speed setting and stripping. All standard column diameters
from 12 to 84 in 80, 40, and 10 lengths are available on a sale or rental
basis.
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
www.atlasform.com
70- FOUNDATION
33
Contractor Committed.
COLUMN FORMING
SONOTUBE FORMS
Sonotube forms are made from multiple layers of high quality
fibre, providing a strong, lightweight and easy to handle
column form. The spiral wound and laminated Sonotube form
is a one-piece unit; there are no assembly costs and the form
may be cut to fit any desired length.
Inside
Diameter
USES
Round columns
Piers and footings
Pile forms
Light pole and fence pole bases
Flagstones and round steps
Standard
Wall Thickness
0.120
Heavy Wall
Thickness
0.145
15.10.10106
0.120
15.10.20106
0.160
15.10.10108
0.120
15.10.20108
0.160
10
15.10.10110
0.140
15.10.20110
0.190
12
15.10.10112
0.140
15.10.20112
0.190
14
15.10.10114
0.165
15.10.20114
0.215
16
15.10.10116
0.165
15.10.20116
0.250
18
15.10.10118
0.190
15.10.20118
0.250
20
15.10.10120
0.190
15.10.20120
0.295
22
15.10.10122
0.210
15.10.20122
0.295
24
15.10.10124
0.210
15.10.20124
0.295
26
0.270
28
0.295
15.10.20128
0.365
0.295
15.10.20130
0.365
30
15.10.10130
32
36
0.295
0.295
34
0.365
0.295
15.10.10136
0.295
0.365
15.10.20136
0.365
42
15.10.20142
0.445
48
15.10.20148
0.505
60
15.10.20160
0.600
PRODUCTS
70- FOUNDATION
Standard
Product Code No.
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
34
www.atlasform.com
FORMING
ACCESSORIES
SCISSOR CLAMPS
10-FORMING
& SHORING
COLUMN CLAMPS
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
* Clamps are sold and rented by the piece, but two (2) pieces are required to make a
useable clamp set.
** Concrete dimensions based on 3/4 plywood with flat 2 x 4s at 6 on center.
www.atlasform.com
70- FOUNDATION
35
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
10
8.1
8.1
8
6
5.1
4
2
0
6' 6"
7' 2"
7' 10"
8' 6"
9' 2"
9' 10"
10' 6"
11' 1"
Height
30-ATLAS TECH
PRODUCTS
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
PRODUCTS
60-PRECAST
& TILT-UP
The Atlas Jumbo Shore is fabricated with a secure locking pin that
is inserted into one of the holes spaced at 4 intervals along the inner
post. Once Jumbo Shore is set in position, a threaded collar with
handle allows for easy height adjustment over a 6 range. With a high
load capacity, the 59 lb. Jumbo Shore may be spaced further apart
than other post shore systems, therefore reducing material and labor
costs.
The Atlas Shores are quickly and safely set in place with 3 simple
steps:
1. Lift inner tube to approximate height required.
2. Insert pin in nearest hole to desired height.
3. Turn handle of threaded collar for final adjustment.
Post Shores are quickly and safely set in place. They have a
unique locking pin for approximate height adjustment. This pin is
inserted into one of the holes spaced at 4 intervals along the
length of the post. After the Post Shore is positioned, a threaded
collar with a handle permits fine height adjustments over a 6
range.
70- FOUNDATION
36
www.atlasform.com
FORMING
ACCESSORIES
ATLAS AL-SPEED
SAFETY RAIL POST
20-FORMING
ACCESSORIES
2 x 4, 2 x 6 OR CABLE READY
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
TOEBOARD READY
50-FLATWORK
ACCESSORIES
10-FORMING
& SHORING
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
37
10.30.30400
10.30.30600
12.51.46681
12.51.46941
20.20.21000
20.20.21100
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Contractor Committed.
FORMING COMPONENTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
38
www.atlasform.com
Product Code 28
20.10.21028
Product Code 42
20.10.21042
FORMING
ACCESSORIES
Wt. Lbs.
20.10.21554
45.0 Ea.
C-49
20-FORMING
ACCESSORIES
Designed for use on prestressed concrete beams and medium depth steel beams.
Aids in preventing web of beam from bending during construction of bridge deck.
Design allows Bracket to be used on prestressed concrete beams without requiring wood blocking.
Accepts C-51 Wall Plate Assembly
Under special conditions, Bracket can be adjusted to a minimum vertical height
of 14.
C-49-D
30-ATLAS TECH
PRODUCTS
Special Order
Product Code No.
Wt. Lbs.
50.0 Ea.
C-49-JR
Special Order
Product Code No.
40-BAR
SUPPORTS
10-FORMING
& SHORING
Wt. Lbs.
35.0 Ea.
50-FLATWORK
ACCESSORIES
Designed for use on prestressed concrete beams and medium depth steel beams.
Short chord length allows brackets to be used where full sized brackets can not be
utilized.
Design allows Bracket to be used on prestressed concrete beams without requiring
wood blocking.
Accepts C-51 Wall Plate Assembly
C-51
Special Order
Type
Wt. Lbs.
.40 Ea.
1.35 Ea.
C-51-R
PRODUCTS
1.75 Ea.
70- FOUNDATION
Assembly
Adjustment Plate Only
60-PRECAST
& TILT-UP
Special Order
80- TOOLS &
PLACING
Wt. Lbs.
1.75 Ea.
www.atlasform.com
39
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
FORMING PLYWOOD
HDO CONCRETE FORM PANEL
HDO 100/30 is designed to provide multiple reuses
and produce excellent concrete finishes at a lower
per pour cost than other HDO forming panels.
HDO 100/30 concrete form panels are made of
high quality, exterior grade plywood with an high
resin content face overlay for extra durability and
smoothness.
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Contractor Committed.
ENGINEERED LUMBER
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
PRODUCTS
70- FOUNDATION
40
www.atlasform.com
FORMING
ACCESSORIES
5/8 Pine
20.27.10060
3/4 Pine
20.27.10075
1 Pine
20.27.10100
1-1/16 Pine
20.27.10107
1-1/2 Pine
20.27.10150
20-FORMING
ACCESSORIES
Length
1/2 Pine
10-FORMING
& SHORING
WOOD CHAMFER
CHAMFER/FORMER STRIPS
30-ATLAS TECH
PRODUCTS
RADIUS FORMERS
Made from a specially designed plastic
material that provides a smooth,
uninterrupted, rounded radius corner
to poured concrete. The material strips
cleanly from finished concrete and is
easily removed from forms for reuse.
20.27.22075
40-BAR
SUPPORTS
Length
1/2 Plastic Radius with Tail
50-FLATWORK
ACCESSORIES
CHAMFER STRIPS
Length
20.27.20050
20.27.20060
20.27.20075
20.27.20107
PRODUCTS
20.27.20100
DRIP STRIPS
www.atlasform.com
70- FOUNDATION
1 All Plastic
60-PRECAST
& TILT-UP
41
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
PRODUCTS
60-PRECAST
& TILT-UP
70- FOUNDATION
Contractor Committed.
FORMLINERS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
42
www.atlasform.com
FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMLINERS
Formliner Patterns
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
Features of Formliners
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
Formliner Accessories
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
43
10-FORMING
& SHORING
FORMING
ACCESSORIES
Contractor Committed.
MIKE BRACKET
FORMING COMPONENTS
3/4 Plywood
20-FORMING
ACCESSORIES
Aluminum Beam
Snubnose Taper Tie
Atlas Tie Plate
30-ATLAS TECH
PRODUCTS
Aluminum Strongback
20.20.63000
20.20.62000
#5 Rebar
3/4 Plywood
PRODUCTS
End Dimension
Keeper
STAY-FORM
Lumber Dimension
70- FOUNDATION
60-PRECAST
& TILT-UP
Expanded mesh
between solid ribs
STAY-FORM/QUICKJET
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
T
EE ET
SH HE
D
S
T
S TD
79 7 S
t
9
je
ick orm
Qu tayf
S
Hook Tie
Keeper
44
Brand
Product
Stayform
27 x 97 panel
20.75.12797
Quickjet
20.75.21500
Quickjet
20.75.21600
Quickjet
Quickjet Angle
20.75.22200
www.atlasform.com
FORMING
ACCESSORIES
20-FORMING
ACCESSORIES
Size
Length
DSI Rod
5/8
48
19.6 Kips
10.63.16048
DSI Rod
5/8
66
19.6 Kips
10.63.16066
DSI Rod
5/8
72
19.6 Kips
10.63.16072
DSI Rod
7/8
48
33.7 Kips
10.63.14048
DSI Rod
7/8
66
33.7 Kips
10.63.14066
DSI Rod
7/8
72
33,7 Kips
10.63.14072
Component
Taper
Length
1-1-1/4
62
38,200 Lbs.
10.63.12062
1-1-1/4
72
38,200 Lbs.
10.63.12072
Component
Size
Component
Size
5/8
10.63.16700
5/8
10.63.16910
7/8
10.63.14700
5/8
10.63.16920
7/8
10.63.14910
7/8
10.63.14920
1 PVC Sleeve
1-1/4 PVC Sleeve
Sleeve
I.D.
Product
Code No.
5/8
13/16
50.41.07501
Component
Size
7/8
1-5/16
50.41.10001
Plate Washer
3 x 3
20.31.83003
1-11/16
1-3/8
50.41.12501
Component
Size
DSI Coupler
7/8
10.63.14930
Component
Length
Dia.
1-1/2
1-5/8
20.35.50006
1-1/2
1-7/8
20.35.50004
1 Plastic Cone
1-1/2
2-1/4
20.35.50003
60-PRECAST
& TILT-UP
Sleeve
O.D.
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
Bar
Size
30-ATLAS TECH
PRODUCTS
Component
Component
20.35.70010
Wt. Lbs.
5/8
.26 ea
20.28.45010
7/8
.37 ea
20.28.45020
1 Lead Plug
.52 ea
20.28.45040
PRODUCTS
Size
Catalog Page #
68
Coil Rod
B-12
59
B-39
65
D-30
72
45
www.atlasform.com
Component
Coil Taper Tie
70- FOUNDATION
Component
5/8 Lead Plug
10-FORMING
& SHORING
End
Wall
Breakback
Wall Size
20.21.31105
20.21.31106
31.8
23.5
20.21.31107
32.9
1 x 1 Plastic Cone
Wall Size
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
20.21.32106
Wt. Lbs.
per 100
20.21.32107
24.7
7-5/8
20.21.33107
33.6
20.21.34107
25.4
20.21.31108
34.0
25.8
20.21.31109
35.1
26.9
10
20.21.31110
36.3
20.21.32108
20.21.32109
10
20.21.32110
28.0
11-5/8
20.21.33111
38.1
11-5/8
20.21.34111
29.9
12
20.21.31112
38.5
20.21.31113
12
20.21.32112
30.3
13
14
20.21.32114
32.6
14
20.21.31114
40.8
15
20.21.32115
33.7
15
20.21.31115
41.9
34.8
16
20.21.31116
43.0
20.21.31118
45.3
16
50-FLATWORK
ACCESSORIES
20.21.32116
18
20.21.32118
37.1
18
20
20.21.32120
39.4
20
20.21.31120
47.6
22
20.21.32122
24
20.21.31124
52.1
23
20.21.32123
26
20.21.31126
24
20.21.32124
28
20.21.31128
28
20.21.32128
30
20.21.31130
30
20.21.32130
36
20.21.31136
36
20.21.32136
48
20.21.31148
43.9
50.6
58.9
Made with 1 x 1 plastic cones or metal spreader. Other sizes available upon request.
Hex head measures 1/2 across flats. Note: Because of high tension stress, 100%
breakback is not guaranteed for hex head snap ties with L & W over 4-3/4. Loose
Washer ties available by special order.
Wall
End
Wall Size
20.21.51106
20.21.52106
20.21.51108
20.21.52108
Breakback
PRODUCTS
1 x 1 Plastic Cone
70- FOUNDATION
Wt. Lbs.
per 100
7-5/8
8
60-PRECAST
& TILT-UP
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
46
20.21.51109
20.21.52109
10
20.21.51110
20.21.52110
11
20.21.51111
12
20.21.51112
20.21.52112
14
20.21.51114
20.21.52114
16
20.21.51116
20.21.52116
18
20.21.51118
20.21.52118
22
20.21.51122
20.21.52122
24
20.21.51124
20.21.52124
32
20.21.51132
www.atlasform.com
FORMING
ACCESSORIES
A-5
Special Order
A-6
Special Order
A-7-A
50-FLATWORK
ACCESSORIES
Special Order
A-8
Special Order
Up to 29-1/2 O.A.
Product
Code No.
Wt. Lbs.
per 100
36.8
www.atlasform.com
PRODUCTS
A-9
Special Order
70- FOUNDATION
60-PRECAST
& TILT-UP
Length
40-BAR
SUPPORTS
A-7
Special Order
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
47
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
A-21-F
Contractor Committed.
FLAT TIE
Special Order
Wall Size
A-21-K
Product
Code No.
Wt. Lbs.
per 100
24.0
10
28.4
12
32.8
TIE KEY
30-ATLAS TECH
PRODUCTS
Special Order
Product
Code No.
A-21-U
Wt. Lbs.
Packaging
STRAP TIE
Special Order
Wt.Lbs.
per 100
A-21-X
20.6
30.4
10
34.8
12
39.0
14
41.2
16
45.6
X-FLAT TIE
Heavy Duty available upon request.
PRODUCTS
Wall Size
Product
Code No.
20.22.20006
20.22.20008
10
20.22.20010
11
20.22.20011
12
20.22.20012
15
20.22.20015
18
20.22.20018
24
20.22.20024
70- FOUNDATION
Product
Code No.
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
Wall Size
48
www.atlasform.com
FORMING
ACCESSORIES
A-22
Wall Size
End Size
6
8
10
Product
Code No.
Wt. Lbs.
per 100
Packaging
3/4
36.3
3/4
43.1
3/4
47.9
3/4
52.7
1-1/8
41.0
1-1/8
47.8
10
1-1/8
52.6
12
1-1/8
57.4
Type
Wt. Lbs.
A-27
20.20.00100
7.0 Ea.
A-27-M
A-27
7.0 Ea.
A-29
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
12
10-FORMING
& SHORING
SPREADER CLEATS
Special Order
Special Order
Wt. Lbs.
per 100
2.3 Ea.
BREAKBACK WRENCH
A-30
50-FLATWORK
ACCESSORIES
Special Order
60-PRECAST
& TILT-UP
Wt. Lbs.
1.5 Ea.
PRODUCTS
A heavy-duty tool that has many uses on any jobsite, from stripping forms to
jockeying tilt-up panels. The handle is fabricated from 1x2 tubular steel that is
carefully mig-welded to a heat-treated milled blade.
Product Code No.
Wt. Lbs.
80.48.6200
15.0 Ea.
5 Blade
Type
3 Blade
15.0 Ea.
www.atlasform.com
70- FOUNDATION
49
10-FORMING
& SHORING
FORMING
ACCESSORIES
A-31
Contractor Committed.
Special Order
Type
A-35
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
0.8 Ea.
STRONGBACK TIE
Special Order
Length
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
Hex A-31
Wt. Lbs.
7-1/2
A-40
Wt. Lbs.
.250 Ea.
A-44
A-45
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
Special Order
BASE TIE
Wall Size
20.22.30006
20.22.30008
20.22.30009
10
12
50
www.atlasform.com
FORMING
ACCESSORIES
A-46
A-48
Wall Size
20.22.10006
20-FORMING
ACCESSORIES
Wall Size
7
20.22.10008
10
20.22.10010
10
12
20.22.10012
12
13
20.22.10013
14
14
20.22.10014
15
15
20.22.10015
16
16
20.22.10016
18
18
20.22.10018
20
20
20.22.10020
24
24
20.22.10024
28
20.22.10028
30
20.22.10030
32
20.22.10032
36
20.22.10036
40
20.22.10040
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
10-FORMING
& SHORING
LOOP TIES
60-PRECAST
& TILT-UP
7
8
10
12
13
14
PRODUCTS
16
18
20
24
www.atlasform.com
70- FOUNDATION
15
51
A-49
A-51
40-BAR
SUPPORTS
WEDGE BOLT
Product Code No.
Packaging
12.55.60058
12.0
A-52
Z TIE HOLDER
Product Code No.
Packaging
12.55.60056
70.0
50 per carton
A-53
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
WALER TIE
Size
Packaging
2x4
12.55.60062
11.5
2x6
12.22.60063
14.0
PRODUCTS
70- FOUNDATION
Contractor Committed.
Special Order
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
52
www.atlasform.com
FORMING
ACCESSORIES
Size
Wt. Lbs.
per 100
Packaging
20.28.40010
2.4
A-55
Special Order
Wall Size
Wt. Lbs.
per 100
18.0
19.0
7-5/8
20.0
21.0
22.0
10
23.0
11-5/8
25.0
12
26.0
14
29.0
15
31.0
16
32.0
18
33.0
20
35.0
24
40.0
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
A-56
60-PRECAST
& TILT-UP
SURE-LOCK BRACKET
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
For filling holes left by plastic cones; eliminates job patching problems.
Use Atlas Acryl Bond or Epoxy Bonder to glue in the plug.
Stocked in Grey only
Available in full cartons only.
10-FORMING
& SHORING
A-54
CONCRETE PLUGS
Special Order
Packaging
1.4 Ea.
50 per carton
PRODUCTS
Wt. Lbs.
70- FOUNDATION
www.atlasform.com
53
A-56-A
40-BAR
SUPPORTS
Contractor Committed.
SPEEDY BRACKET
Special Order
Wt. Lbs.
1.5 Ea.
A-57
SURE-LOCK STRONGBACK
Special Order
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
A-57-A
Wt. Lbs.
Packaging
0.5 Ea.
STIFFBACK BRACKET
Special Order
Product Code No.
Wt. Lbs.
50-FLATWORK
ACCESSORIES
1.3 Ea.
A-58
SURE PLUG
60-PRECAST
& TILT-UP
Nominal Dia.
Length
Wt. Lbs.
per 100
16
1-1/4
20.28.30010
4.8
18
1-1/8
1-3/8
20.28.30020
5.2
20
1-1/4
1-3/8
20.28.30030
7.3
PRODUCTS
70- FOUNDATION
A-59
Special Order
Plug Size
11
14-16
18-20
22-24
Note: To order complete A-59 Insertion Tool specify the size of plug.
Stems for plug sizes 16, 20 and 24 are interchangeable in a common insertion tool.
The stem for plug size 11 will work only with the insertion tool made for size 11 plugs.
54
www.atlasform.com
FORMING
ACCESSORIES
A-63
Size
Packaging
4 x 4
15.5
4 x 6
17.6
6 x 6
19.6
JAHN A BRACKET
A-81
Wt. Lbs.
Packaging
20.20.10001
1.4 Ea.
50 per carton
30-ATLAS TECH
PRODUCTS
A-82
Wt. Lbs.
Packaging
20.20.10002
1.1 Ea.
75 per carton
50-FLATWORK
ACCESSORIES
JAHN CORNERLOCK
Product Code No.
Wt. Lbs.
Packaging
20.20.10010
2.0 Ea.
20 per carton
A-83
60-PRECAST
& TILT-UP
Wt. Lbs.
Packaging
20.20.10020
0.2 Ea.
www.atlasform.com
PRODUCTS
A-86
70- FOUNDATION
40-BAR
SUPPORTS
JAHN C BRACKET
20-FORMING
ACCESSORIES
Wt. Lbs.
per 100
10-FORMING
& SHORING
55
A-87
50-FLATWORK
ACCESSORIES
Contractor Committed.
A-88
A-89
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
Wt. Lbs.
20.20.10040
17.0 Ea.
Jahn Scaffold Jack; one piece all-steel unit, easily attaches to Waler Brackets
For 24 x 24, 16 x 24 or 16 x 16 tie spacings
A-90
Special Order
Wt. Lbs.
23.0 Ea.
PRODUCTS
A-97
A-100
Wt. Lbs.
Packaging
20.10.31010
3.050 Ea.
SPEED STEP
Special Order
70- FOUNDATION
60-PRECAST
& TILT-UP
Wt. Lbs.
0.8 Ea.
56
www.atlasform.com
FORMING
ACCESSORIES
Special Order
B-2, 1 Dia.
(18,000 Lbs.)
Standard 4-Struts
50-FLATWORK
ACCESSORIES
B-1, 1 Dia.
(13,500 Lbs.)
Standard 2-Struts
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
B-1
B-3
B-4
COIL TIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
57
B-6
Wire Strut
Diameter
AISI No.
Product
Code No.
1/2 Dia.x 4
.306
1008
23.0
3/4 Dia.x 6
.375
1018
54.0
1 Dia. x 8
.440
1038
100.0
1-1/4 Dia. x 8
.440
1038
100.0
B-11
FLAT WASHER
Special Order
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
Plate Size
3/4 Hole
Product Code No.
3 x 3 x 1/4
20.40.83933
3 x 3 x 3/8
20.40.83833
3 x 4 x 3/8
20.40.83834
4 x 4 x 3/8
20.40.83844
4 x 4 x 1/2
5 x 5 x 3/8
20.40.83855
5 x 5 x 1/2
6 x 6 x 3/8
6 x 6 x 1/2
20.40.83766
8 x 8 x 5/8
20.40.83688
PRODUCTS
70- FOUNDATION
Wt. Lbs.
per 100
B-7
B-22
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Contractor Committed.
Special Order
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
58
www.atlasform.com
FORMING
ACCESSORIES
B-12
Safe Working
Load (Lbs.)
Product
Code No.
Wt.
Lbs./Ft.
1/2
12
9,000
20.30.37012
0.530
3/4
12
18,000
20.30.35012
1.150
12
38,000
20.30.33012
2.040
1-1/4
12
56,000
20.30.32012
3.480
1-1/2
12
68,000
20.30.31012
6.010
Note:
20-FORMING
ACCESSORIES
Dia.
30-ATLAS TECH
PRODUCTS
Safe Working
Load (Lbs.)
Product
Code No.
Weight
Lbs./Ft.
5/8
20-0
20,000
20.35.16012
1.00
20.35.16910
20.35.16920
5/8 Cone
20.35.50006
50-FLATWORK
ACCESSORIES
Stock Length
40-BAR
SUPPORTS
Dia.
Wing Nut
5/8 Coupler
7/8
20-0
32,000
20.35.14012
20.35.14910
20.35.14920
7/8 Cone
20.35.50004
1.550
60-PRECAST
& TILT-UP
Wing Nut
Wing Nut Bracket
7/8 Coupler
B-13
Dia.
1/2
20.30.80701
5/8
20.30.80601
3/4
20.30.80501
PRODUCTS
70- FOUNDATION
COIL NUTS
10-FORMING
& SHORING
COIL ROD
7/8
20.30.80301
1-1/4
20.30.80201
1-1/2
20.30.80101
Note:
www.atlasform.com
59
B-14
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
Contractor Committed.
COIL BOLTS
1/2 Diameter
Bolt Length
1-1/2
2
20.30.47020
2-1/2
20.30.47025
20.30.47030
3-1/2
20.30.47035
30-ATLAS TECH
PRODUCTS
20.30.45020
20.30.45025
20.30.45030
3-1/2
20.30.45035
20.30.45040
20.30.45060
10
20.30.47100
11
12
12
40-BAR
SUPPORTS
2
2-1/2
20.30.45120
13
13
14
14
15
15
16
16
17
17
50-FLATWORK
ACCESSORIES
11
18
18
1 Diameter
(18,000 Lbs.)
1-1/4 Diameter
(27,000 Lbs.)
Bolt Length
Bolt Length
20.30.43040
20.30.43060
20.30.43080
60-PRECAST
& TILT-UP
10
12
20.30.43120
14
12
14
16
16
18
PRODUCTS
20.30.42060
10
18
20
20.30.43200
24
20.30.43240
30
20.30.43300
1-1/2 Diameter
(41,250 Lbs.)
36
20.30.43360
Bolt Length
20.43480
20.30.41060
48
All 1/2 diameter Coil Bolts less than 6 long have a rated work load of 4,125 lbs.
All 1/2 diameter Coil Bolts 6 or longer have a rated work load of 6,750 lbs.
70- FOUNDATION
(9,000 Lbs.)
Bolt Length
10
3/4 Diameter
60
www.atlasform.com
FORMING
ACCESSORIES
B-14-A
Special Order
Length
1/2
12
1/2
1/2
Product
Code No.
Wt. Lbs.
Dia.
Length
Product
Code No.
75.0
3/4
12
148.0
16
91.8
3/4
16
186.0
18
100.0
3/4
18
205.0
1/2
20
108.2
3/4
20
224.0
1/2
24
125.0
3/4
24
262.0
B-14-W
Special Order
Dia.
Product
Code No.
1/2
Wt. Lbs.
per 100
30-ATLAS TECH
PRODUCTS
Wt. Lbs.
per 100
20-FORMING
ACCESSORIES
Dia.
10-FORMING
& SHORING
173.5
40-BAR
SUPPORTS
B-15
Special Order
Cone Size
Wt. Lbs.
1.6 Ea.
1.9 Ea.
2.4 Ea.
3.3 Ea.
Wt. Lbs.
per 100
1/2
3-1/2
20.41.17035
1/2
20.40.17040
18.0
1/2
20.40.17060
30.2
3/4
20.41.15040
37.6
3/4
20.41.15060
39.2
3/4
20.41.13040
20.40.13060
PRODUCTS
Length
70- FOUNDATION
Dia.
B-16
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
80.5
Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety
factor are 1/4 of the approximate ultimate strength based on the mechanical strength
of the strut wire and welds.
www.atlasform.com
61
B-17
B-18
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Dia.
Length
Product
Code No.
9,500
12
2.37
9,500
1-1/4
12
2.45
9,500
1-1/2
12
2.65
13,500
12
3.12
13,500
1-1/4
12
3.20
13,500
1-1/2
12
3.40
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
Contractor Committed.
Special Order
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
Dia.
Length
2,250
1/2
2,250
1/2
0.25
2,250
1/2
0.307
2,250
1/2
12
3,750
3/4
20.41.35060
0.608
3,750
3/4
20.41.35090
0.790
3,750
3/4
12
1.114
4,500
3/4
1.250
4,500
3/4
12
4,500
4,500
20.41.33090
0.675
4,500
12
20.41.33120
1.200
20.41.32120
1.850
7,675
12
7,675
1-1/4
12
7,675
1-1/2
12
Wt. Lbs./Ea.
0.21
0.583
1.521
20.41.33060
0.520
1.770
2.050
B-20
WALE HOLDER
Special Order
Size
62
Product
Code No.
Wt.Lbs.
per 100
1/2 Coil
25.0
3/4 Coil
36.5
www.atlasform.com
FORMING
ACCESSORIES
B-21
Thread Length
O.A. Length
1/2
5-3/4
1/2
3-1/2
6-1/4
26.0
1/2
6-3/4
28.8
1/2
4-1/2
7-1/4
31.0
1/2
8-3/4
37.6
1/2
9-3/4
42.0
1/2
10-3/4
46.4
1/2
10
12-3/4
55.3
1/2
12
14-3/4
64.0
1/2
14
16-3/4
73.0
20-FORMING
ACCESSORIES
Dia.
Special Order
Height
1/2
1-3/16
Wt. Lbs./Ea
0.300
5/8
1-3/16
0.265
3/4
1-3/16
0.230
0.538
1-1/4
2-1/2
1.500
1-1/2
3-3/8
3.130
40-BAR
SUPPORTS
Dia.
B-27
Size
Washer Dia.
1/2
20.30.87003
161.4
3/4
20.30.55003
161.4
7/8
225.0
225.0
50-FLATWORK
ACCESSORIES
Setback
Wt. Lbs.
per 100
B-30: Screw-on
Cone Plastic
Product Code No.
Wt. Lbs.
per 100
4.1
4.5
1/2
1-1/2
5.1
5.2
1/2
6.6
6.9
3/4
6.0
6.6
3/4
1-1/2
7.5
9.4
3/4
9.6
12.3
2-1/2
2
2-1/2
14.8
1-1/4
1-1/4
PRODUCTS
1/2
70- FOUNDATION
B-29: Loose
Cone Plastic
Product Code No.
B-29
B-30
60-PRECAST
& TILT-UP
30-ATLAS TECH
PRODUCTS
B-25
10-FORMING
& SHORING
16.6
18.8
16.6
19.8
www.atlasform.com
63
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
B-31
Contractor Committed.
B-32
Size
Hole Dia.
Depth
Wt. Lbs.
per 100
1/2
1-3/8
66.8
3/4
1-5/8
95.2
1-3/4
10
96.6
B-33
PRODUCTS
Product
Code No.
Wt. Lbs.
per 100
1/2
21.0
3/4
38.5
77.0
Dia.
Length
Plain Product
Code No.
9,500
12-3/8
237.0
9,500
1-1/4
12-3/8
245.0
9,500
1-1/2
12-3/8
266.0
13,500
12-1/2
312.0
13,500
1-1/4
12-1/2
20.41.42125
320.0
13,500
1-1/2
12-1/2
20.41.41125
341.0
Galvanized
Product
Code No.
Wt. Lbs.
per 100
Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety
factor are 1/4 of the approximate ultimate strength based on the mechanical strength
of the strut wire and welds.
B-37
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Special Order
64
www.atlasform.com
FORMING
ACCESSORIES
Size
1/2
20.30.80702
65.0
3/4
20.30.80502
B-39
90.0
7/8
107.0
20.30.80302
107.0
1-1/4
20.30.80202
122.0
1-1/2
20.30.80102
286.0
1-1/8
114.0
B-40
Color
1/2
Light Gray
0.94
1/2
Dark Gray
0.94
3/4
Light Gray
1.85
30-ATLAS TECH
PRODUCTS
Special Order
B-42
Special Order
Product Code No.
40-BAR
SUPPORTS
20-FORMING
ACCESSORIES
Size
10-FORMING
& SHORING
Wt. Lbs.
per 100
100.0
3/4
250.0
400.0
50-FLATWORK
ACCESSORIES
1/2
Special Order
Dia.
Length
18,000
1-1/4
12/15
Wt. Lbs.
per 100
450.0
PRODUCTS
Minimum concrete strength of 2,000 psi; Safe Working Loads shown with 4 to 1 safety
factor are 1/4 of the approximate ultimate strength based on the mechanical strength of the
strut wire and welds.
70- FOUNDATION
60-PRECAST
& TILT-UP
B-43
www.atlasform.com
65
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
D-1
D-18
Contractor Committed.
1/2 dia.
5/8 dia.
3/4 dia.
1 dia.
6
6
6
8
30-ATLAS TECH
PRODUCTS
Tie Length
1 Dia. Heavy
(38,000 Lbs)
6
7
8
9
10
11
40-BAR
SUPPORTS
12
13
14
15
16
17
50-FLATWORK
ACCESSORIES
18
1 Dia. Heavy
(38,000 Lbs)
60-PRECAST
& TILT-UP
6
8
10
12
14
16
PRODUCTS
70- FOUNDATION
15
18
20
22
24
30
36
66
www.atlasform.com
FORMING
ACCESSORIES
D-1-J
D-1-L
D-1-LA
D-1-J Bolt
1/2 Dia. X 1-1\2 end
Size
Wt. Lbs.
per 100
20.25.37002
9.0
20.25.37003
13.4
20.25.37004
17.8
20.25.37006
26.6
3-1/2
3-1/2
20.25.37008
35.4
24.4
10
20.25.37010
44.2
4-1/2
4-1/2
26.6
12
20.25.37012
28.8
D-1-LA Bolt
1/2 Dia. X 1-1\2 end
D-1-L Bolt
1/2 Dia. X 1-1\2 end
Product Code No.
Size
Wt. Lbs.
per 100
22.2
61.8
5-1/2
5-1/2
31
18
79.4
33.2
88.2
6-1/2
6-1/2
35.4
20
20.25.37020
30-ATLAS TECH
PRODUCTS
53.0
14
20.20.27010
0.2 Ea.
D-1-PA
ANCHOR BOLT
Length
1/2
Product
Code No.
Bolt Dia.
Length
5/8
50-FLATWORK
ACCESSORIES
Bolt Dia.
Product
Code No.
5/8
1/2
10
60.25.27010
5/8
10
60.25.26010
1/2
12
60.25.27012
5/8
12
60.25.26012
1/2
14
5/8
14
1/2
16
5/8
16
60.25.26016
1/2
18
5/8
18
60.25.26018
60-PRECAST
& TILT-UP
1/2
PRODUCTS
Special Order
Shell Size
1/2 x 3/4
Product
Code No.
Wt. Lbs.
Per Carton
2 x 5
8.0
2 x 7
10.0
1 & 1-1/4
3 x 10
50 Per Ct.
13.0
4 x 15
20 Per Ct.
12.0
2 & 2-1/4
4 x 18
20 Per Ct.
15.0
2-1/2 & 3
6 x 24
10 Per Ct.
18.0
4 & 5
6 x 24
10 Per Ct.
18.0
Packaging
Sizes for smooth round bars. When using rebar, increase anchor-bolt sleeve by 1/4.
www.atlasform.com
70- FOUNDATION
D-1-S
40-BAR
SUPPORTS
20-FORMING
ACCESSORIES
Size
10-FORMING
& SHORING
67
D-2
40-BAR
SUPPORTS
Overall Length
Product
Code No.
Wt. Lbs.
3/4
3-1/3
20
20.30.25020
2.0 Ea.
3/4
17
20.30.25017
2.0 Ea.
3/4
24
20.30.25024
2.0 Ea.
3/4 diameter Acme Thread (external) for 1/2 diameter Inside Tie Rod with NC threads.
She Bolts with coil threads and larger sizes see D-30.
West Coast Acme Thread is 5 threads per inch.
Caution: Acme Thread pitch varies from region to region.
D-4
D-6
Length
Threads
Per Inch
Product
Code No.
3/8
1-3/4
16
20.40.68001
11.0
1/2
1-3/4
13
20.40.67005
18.1
3/4
2-1/4
10
20.40.65001
27.0
7/8
2-1/2
20.40.64001
42.0
2-3/4
20.40.63005
60.0
3/4
3-1/3 Acme
Wt. Lbs.
1.3 Ea
Dia.
Wt. Lbs.
1/2
5 Acme
20.32.57003
1.4 Ea.
3/4
5 Acme
20.32.55003
1.3 Ea.
D-9
Tie Length
1 to 3/4 Dia.
(18,000 Lbs.)
1-1/4 to 1 Dia.
(34,000 Lbs.)
PRODUCTS
30
34
20.30.16034
36
20.30.16036
42
43
20.30.16043
48
70- FOUNDATION
Wt. Lbs./Ea.
West Coast
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
Contractor Committed.
ACME THREAD
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
10.63.12048
52
20.30.16052
54
20.30.16054
60
20.30.16060
72
10.63.12072
80
10.63.12078
68
10.63.12054
www.atlasform.com
FORMING
ACCESSORIES
D-9-A
Taper Length
Taper Length
Overall
Length
5/8
13/16 to 5/8
16
41
5/8
13/16 to 5/8
24
49
5/8
13/16 to 5/8
32
57
5/8
1 to 5/8
16
41
5/8
1 to 5/8
24
49
5/8
1 to 5/8
32
57
7/8
1-1/4 to 7/8
16
42
7/8
1-1/4 to 7/8
24
50
7/8
1-1/4 to 7/8
32
58
Product
Code No.
D-9-UHS
40-BAR
SUPPORTS
75,000 Lb. Safe Work Load - 1-1/2 Diameter Coil Threads Each End
Taper 1-3/4 - 1-1/2.
Special Order
Size No.
Rod Dia.
Product
Code No.
Wt. Lbs.
per 100
Clamps Per
Carton
1/4
38.2
50
3/8
119.1
50
1/2
202.0
50
50-FLATWORK
ACCESSORIES
D-12
ROD CLAMP
30-ATLAS TECH
PRODUCTS
Thread Dia.
20-FORMING
ACCESSORIES
Size No.
10-FORMING
& SHORING
60-PRECAST
& TILT-UP
PENCIL ROD
Special Order
20.25.79012
20.25.78012
D-12-A
PRODUCTS
70- FOUNDATION
Type
www.atlasform.com
69
D-12-F
Special Order
Size
D-12-S
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
FORM CLAMP
Wt. Lbs.
8.0 Ea.
Product
Code No.
Wt. Lbs.
per 100
Clamps Per
Carton
1/4
20.20.31010
38.2
100
3/8
20.20.31015
70.6
50
D-14
TIGHTENING WRENCH
Rod Dia.
Product
Code No.
Wt. Lbs.
1/4
20.20.31020
1.3 Ea.
3/8
1.3 Ea.
1/2
1.3 Ea.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
70
www.atlasform.com
FORMING
ACCESSORIES
D-21
Wall Size
Product
Code No.
Up to 12
Wt. Lbs.
per 100
25.0
BATTER WASHER
D-22
Special Order
30-ATLAS TECH
PRODUCTS
Product
Code No.
Wt. Lbs.
1-1/4-1-3/8
5.5 Ea.
1-1/2-1-5/8
5.5 Ea.
20-FORMING
ACCESSORIES
Bolt Dia.
10-FORMING
& SHORING
D-24
40-BAR
SUPPORTS
Bent Plate
Product
Code No.
Pivot Pin
Product
Code No.
Clip
Product
Code No.
Wt. Lbs.
per 100
1/2
9,000
320.0
5/8
12,000
320.0
3/4
18,000
320.0
7/8
25,000
320.0
31,500
950.0
42,500
950.0
60-PRECAST
& TILT-UP
1
1-1/8
50-FLATWORK
ACCESSORIES
Thread Dia.
Dia.
Length
D-25 Bolt
9,000
36.0
D-26 Bolt
12,000
18.0
PRODUCTS
Product
D-25
D-26
70- FOUNDATION
www.atlasform.com
71
10-FORMING
& SHORING
FORMING
ACCESSORIES
D-30
Contractor Committed.
SHE BOLT
FURNISHED WITH COIL THREAD
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
Approx. Work
Load Lbs.
Length
Product Code
No.
20.30.25020
3/4
1/2
8,625
20
7/8
1/2 or 5/8
9,000 or 12,000
18
3.0
7/8
1/2 or 5/8
9,000 or 12,000
20
3.7
7/8
1/2 or 5/8
9,000 or 12,000
24
4.0
5/8
12,000
1-1/8
3/4
18,000
1-1/4
3/4
18,000
20
20.30.22020
5.6
1-1/4
3/4
18,000
24
20.30.22024
7.0
1-1/4
3/4
18,000
30
20.30.22030
1-1/4
3/4
18,000
35
1-3/8
7/8 or 1
31,000 or 33,750
1-1/2
37,500
20
8.3
1-1/2
37,500
24
10.2
1-1/2
37,500
30
13.2
37,500
35
15.6
1-5/8
1-1/8 or 1-1/4
44,750 or 45,500
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Approx. Working
Load Lbs.
Dia.
Length
18,000
5/8
18
5/8
20
5/8
24
5/8
30
7/8
18
7/8
20
7/8
24
7/8
30
18,000
32,000
PRODUCTS
70- FOUNDATION
9.1
1-1/2
Special Order
32,000
72
11.8
D-30-A
Wt. Lbs.
www.atlasform.com
Product
Code No.
Wt. Lbs.
4.9
7.0
7.2
10.2
FORMING
ACCESSORIES
D-32
Length
Wt. Lbs.
1/2
2-1/2
20.30.80705
0.2 Ea.
3/4
20.30.80505
0.4 Ea.
4-1/2
20.30.80305
2.1 Ea.
0.9 Ea.
1-1/4
5-1/2
20.30.80205
2.8 Ea.
1-1/2
20-FORMING
ACCESSORIES
7/8
4.1 Ea.
Special Order
Size
1-1/4 to 1
1-1/2 to 1-1/4
D-49
Special Order
40-BAR
SUPPORTS
MAGNA JAW
U.S. Patent No. 4,880,245
30-ATLAS TECH
PRODUCTS
D-40
HE-BOLT
10-FORMING
& SHORING
CLOSED COUPLER
Wt. Lbs.
50-FLATWORK
ACCESSORIES
8.0 Ea.
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
73
D-60
D-67
D-61
D-69
40-BAR
SUPPORTS
Dia.
Wt. Lbs.
Packaging
D-60-G6000
0.306
20.20.33011
D-67-G15000
0.500
20.20.33005
50 per pail
SUPERTIE WEDGE
FOR FIBERGLASS ROD
Type
Wt. Lbs.
Packaging
Fits Rod
D-61-H6000
20.20.33060
0.306
50 per carton
0.500
D-62
D-68
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
SUPERTIE GRIPPER
D-69-H15000
Standard Dia.
x Length
Wt. Lbs.
D-63
D-70
.306 x 12 ft.
20.25.68012
D-62-R6/20G
.306 x 20 ft.
20.25.68020
D-68-R15/20G
.500 x 20ft.
20.25.67020
SUPERTIE WATERSTOP
FOR FIBERGLASS ROD
Special Order
Type
Wt. Lbs.
Packaging
D-63-WS 6000
D-70- WS15000
D-64
Wt. Lbs.
Packaging
SC6000
20.20.33200
74
Packaging
D-62 - R6/12G
70- FOUNDATION
Contractor Committed.
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
www.atlasform.com
FORMING
ACCESSORIES
F-1
Special Order
Dia.
Length
Plain
Product
Code No.
Galvanized
Product
Code No.
Wt. Lbs.
per 100
23.8
54.0
1-1/4
80.6
1-1/2
89.4
13
F-2
Dia.
Length
Plain
Product
Code No.
Galvanized
Product
Code No.
30-ATLAS TECH
PRODUCTS
121.0
12
261.0
1-1/4
16
565.0
1-1/2
18
954.0
1-3/4 and 2
F-3
Dia.
Length
3/4
Product
Code No.
Wt. Lbs
per 100
Ea. 1 Add
Wt. Lbs.
155.0
12.5
376.0
22.3
1-1/4
12
757.0
35.0
1-1/2
14
1331.0
50.0
F-4
PRODUCTS
F-4-T
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Special Order
40-BAR
SUPPORTS
3/4
20-FORMING
ACCESSORIES
3/4
10-FORMING
& SHORING
SCREW ANCHORS
www.atlasform.com
75
F-5
THREADED INSERTS
Also see F-42, F-43 and F-44
Bolt Dia.
Type
Wt. Lbs.
per 100
1/2
13NC
35.0
5/8
11NC
60.0
3/4
10NC
51.3
7/8
9NC
90.0
F-7
Type
Plain Product
Code No.
Galvanized
Product Code No.
Wt. Lbs.
per 100
3/4
F-7
108.0
3/4
F-7-L
229.0
50-FLATWORK
ACCESSORIES
NC Threads
Bolt Dia.
Length
3/4
1-1/2
25.0
3/4
31.0
3/4
2-1/2
37.0
3/4
43.0
Plain Product
Code No.
Galvanized
Product Code No.
Wt. Lbs.
per 100
Plain Product
Code No.
Galvanized
Product Code No.
Nut
11.9
3/4
Washer
10.3
76
Wt. Lbs.
per 100
3/4
PRODUCTS
60-PRECAST
& TILT-UP
Bolt Dia.
70- FOUNDATION
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Contractor Committed.
Special Order
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
www.atlasform.com
FORMING
ACCESSORIES
Special Order
For Cushion-Lock and Gasket-Lock Reglets see F-100 thru F-122
Type
Product
Code No.
Galvanized Filled
40.0
6,000 ft.
Galvanized Open
37.0
6,000 ft.
F-17
20-FORMING
ACCESSORIES
Wt. Lbs.
per 100 ft.
F-16
10-FORMING
& SHORING
REGLET
Special Order
Product
Code No.
100 ft.
Wt. Lbs.
per 100 ft.
30.0
6,000 ft.
30-ATLAS TECH
PRODUCTS
Size
Special Order
Size
Length From
Face of Concrete
F-21 Dovetail
16 ga.
3-1/2
50-FLATWORK
ACCESSORIES
Product
5-1/2
F-34
Special Order
Length From
Face of Concrete
26 ga. 7/8
16 ga. 7/8
PRODUCTS
70- FOUNDATION
Size
60-PRECAST
& TILT-UP
40-BAR
SUPPORTS
F-21
DOVETAIL
www.atlasform.com
77
10-FORMING
& SHORING
FORMING
ACCESSORIES
F-37
Contractor Committed.
WALL PLUG
Special Order
Size & Type
Wt. Lbs.
per 100
5.0
F-42
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
Bolt Dia.
Thread Type
Plain
Product
Code No.
Galvanized
Product
Code No.
1/4
20 NC
3/8
1/2
Stainless Steel
Product
Code No.
Wt. Lbs.
per 100
16 NC
20.42.10008
20.42.11008
14.9
13 NC
20.42.10007
20.42.11007
20.5
5/8
11 NC
20.42.10006
3/4
10 NC
20.42.10005
20.42.11005
37.5
7/8
9 NC
47.5
8 NC
57.0
13.5
33.5
F-44
PRODUCTS
F-45
Bolt Dia.
Thread Type
1/4
20 NC
3/8
16 NC
20.42.30008
1/2
13 NC
20.42.30007
5/8
11 NC
20.42.30006
3/4
10 NC
7/8
9 NC
60.0
8 NC
70.0
78
Plain
Product
Code No.
Galvanized
Product
Code No.
Wt. Lbs.
per 100
16.9
20.42.31007
19.4
40.6
50.0
CAP PLUG
Product
Code No.
Stainless Steel
Product
Code No.
18.3
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
NC THREADS
Wt. Lbs.
per 100
3/8
0.2
1/2
0.2
5/8
0.3
3/4
0.4
0.8
1-1/4
1.0
www.atlasform.com
FORMING
ACCESSORIES
F-47
Dia.
Height
3/4
2-3/4
Plain Product
Code No.
Galvanized
Product Code No.
Wt. Lbs.
per 100
32.6
F-48
NC Threads
Product Code No.
Coil Threads
Product Code No.
1/2
Wt. Lbs.
30-ATLAS TECH
PRODUCTS
Dia.
0.7 Ea.
3/4
20.30.80506
1.2 Ea.
20.30.80306
2.8 Ea.
1-1/4
6.0 Ea.
1-1/2
6.0 Ea.
F-49
Bolt Dia.
Bolt Length
Wt. Lbs.
1/2
2-1/2
20.30.57025
0.8 Ea.
20.30.55030
1.3 Ea.
3-1/2
20.30.53035
3.7 Ea.
1-1/4
4.7 Ea.
1-1/2
9.3 Ea.
F-49-A
60-PRECAST
& TILT-UP
3/4
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
EYE BOLT
20-FORMING
ACCESSORIES
EYE NUT
Special Order
10-FORMING
& SHORING
Wt. Lbs.
3/4
3-1/2
20.30.55135
1.2 Ea.
3-1/2
20.30.53135
3.0 Ea.
PRODUCTS
Bolt Length
70- FOUNDATION
Bolt Dia.
www.atlasform.com
79
F-50
Bolt Dia.
Thread Type
Product
Code No.
Wt. Lbs.
per 100
1/2
13 NC
30.0
5/8
11 NC
47.0
3/4
10 NC
66.0
7/8
9 NC
96.0
8 NC
125.0
1-1/8
7 NC
145.0
1-1/4
7 NC
165.0
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
F-52
F-53
Bolt Dia.
Height
Plain Product
Code No.
Galvanized
Product Code No.
Wt. Lbs.
per 100
3/4 - 10 NC
3-1/8
71.0
1 - 8 NC
4-1/8
99.0
PRODUCTS
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Bolt Dia.
Height
3/4
Plain Product
Code No.
Galvanized
Product Code No.
80
Wt. Lbs.
per 100
67.0
3/4
20.41.55150
3-1/2
20.41.53035
20.41.53040
103.0
5-1/2
1-1/4
121.0
1-1/2
139.0
70- FOUNDATION
Contractor Committed.
Special Order
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
www.atlasform.com
20.41.53155
FORMING
ACCESSORIES
F-54
20-FORMING
ACCESSORIES
F-54-RT
10-FORMING
& SHORING
Threads
Insert
Length
No. of
Struts
Plain Product
Code No.
Galvanized
Product
Code No.
Wt. Lbs.
F-56
3/4
Coil
4-1/2
F-57
3/4
NC
4-5/8
20.42.75045
20.42.75145
55.0
F-56
Coil
5-1/2
F-57
NC
5-5/8
117.0
F-58
Coil
5-1/2
163.0
F-59
NC
5-5/8
168.0
F-58
1-1/4
Coil
7-1/2
240.0
F-59
1-1/4
NC
7-5/8
315.0
F-60
1-1/2
Coil
9-1/2
420.0
F-61
1-1/2
NC
9-5/8
490.0
55.0
112.0
50-FLATWORK
ACCESSORIES
Dia.
40-BAR
SUPPORTS
Type
F-56
F-57
F-58
F-59
F-60
F-61
30-ATLAS TECH
PRODUCTS
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
81
F-62
30-ATLAS TECH
PRODUCTS
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
Bolt Dia.
Thread
Type
Height
1/2
13 NC
1-3/4
4-1/2
25.0
Wt. Lbs.
per 100
11 NC
2-7/16
4-7/8
44.0
3/4
10 NC
2-7/16
4-7/8
48.0
3/4
10 NC
3-5/8
4-7/8
66.0
8 NC
2-7/16
5-1/8
86.0
8 NC
4-5/8
5-1/8
106.0
F-63
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
Height
Plain Product
Code No.
Galvanized Product
Code No.
Wt. Lbs.
per 100
1/2
1-3/4
4-1/8
20.41.67015
28.0
3/4
2-5/16
4-7/8
20.41.65025
56.1
3/4
3-1/2
4-7/8
20.41.65035
67.0
2-5/16
5-1/4
20.41.63025
78.8
4-1/2
5-1/4
20.41.63045
20.41.63145
97.0
F-64
PRODUCTS
60-PRECAST
& TILT-UP
Galvanized
Product Code No.
5/8
Bolt Dia.
70- FOUNDATION
Plain Product
Code No.
Bolt Dia.
Thread Type
Length
Plain Product
Code No.
1/2
13 NC
4-1/8
24.7
1/2
13 NC
6-1/8
37.7
5/8
11 NC
4-1/8
5/8
11 NC
6-1/8
20.42.56006
47.7
Stainless
Steel Product
Code No.
Wt. Lbs.
per 100
3/4
10 NC
4-1/8
20.42.55040
53.8
3/4
10 NC
6-1/8
20.42.55060
66.8
7/8
9 NC
6-1/8
8 NC
6-1/8
20.42.53060
74.8
8 NC
6-1/8
34.7
74.8
82
Galvanized
Product
Code No.
www.atlasform.com
102.3
FORMING
ACCESSORIES
F-65
Special Order
2-STRUT WITH COIL
Dia.
1/2
3/4
24.0
20-FORMING
ACCESSORIES
Type
LF
1/2
LF
5/8
40.0
LF
3/4
61.0
LF
64.0
F-65-W
40-BAR
SUPPORTS
Dia.
LW
1/2
24.0
LW
3/4
35.0
Type
Dia.
1/2
34.0
LF-W
5/8
55.0
LF-W
3/4
80.0
50-FLATWORK
ACCESSORIES
30-ATLAS TECH
PRODUCTS
Type
10-FORMING
& SHORING
TYPE L INSERTS
NC THREADS
Special Order
Thread Type
3/8
16 NC
1/2
13 NC
1.1
5/8
11 NC
1.8
3/4
10 NC
3.3
8 NC
7.6
PRODUCTS
0.9
70- FOUNDATION
Dia.
F-72
60-PRECAST
& TILT-UP
www.atlasform.com
83
F-73
30-ATLAS TECH
PRODUCTS
Wt. Lbs.
1/2
5/8
3/4
7/8
1-1/4
F-74
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
Contractor Committed.
Special Order
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FORMING
ACCESSORIES
F-105
Size
Thread Type
Wt. Lbs.
per 100
3/8
16 NC
20.28.21010
0.5
1/2
13 NC
20.28.21020
0.6
5/8
11 NC
20.28.21030
0.8
3/4
10 NC
20.28.21040
1.0
7/8
9 NC
20.28.21050
1.7
8 NC
20.28.21060
2.0
Wt. Lbs.
37.0 per box
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
84
www.atlasform.com
FORMING
ACCESSORIES
H-3
Slot Size
Type
Gauge
7/16
16 ga. Galv.
3/16
16 ga. Galv
13.1
10-FORMING
& SHORING
BEAM CLIP
Special Order
Packaging
20.28.10010
4.0
20.28.10020
7.0
H-6
FORM PATCH
Product Code No.
Packaging
20.28.11175
20.0
20.28.11225
27.0
20.28.11275
33.0
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
9/16
13/16
20-FORMING
ACCESSORIES
H-5
PLASTIC PLUG
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
85
Contractor Committed.
Quality
Proven Performance
Consistent
Service
Availability
Technical Support
Trust
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
www.atlasform.com
Description
Coverage
Untreated Plywood: 700 - 1,200 ft2 per gal.
BB Grade Plyform: 1,200 ft2 per gal.
MDO: 1,200 - 1,500 ft2 per gal.
HDO: 2,000 ft2 per gal.
Steel, Aluminum, Fiberglass: 2,000 - 2,500 ft2 per
gal.
Atlas Fog Spray Tip
This valuable spray tip increases
coverage rates up to 400% over
standard fan-type spray tips.
Saves material costs and produces
a great concrete finish!
Packaging
Product Code
5 gallon pails
30.10.10025
55 gallon drums
30.10.10035
30.10.10045
60-PRECAST
& TILT-UP
PRODUCTS
Competitor Release
www.atlasform.com
70- FOUNDATION
Atlas Release
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Uses
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
ATLAS RELEASE
87
Contractor Committed.
ATLAS BIO-GUARD
Water-Based, Biodegradable Form Release Agent
Description
Atlas Bio-Guard is a premium, environmentally safe,
chemically reactive form release agent for use on
many different types of concrete forms. A natural
emulsified organic vegetable oil, Bio-Guard is
biodegradable and is ideal for use in environmentally
sensitive areas, concrete precast plants, or
wherever architectural concrete surfaces are required.
Bio-Guard provides easy form stripping, produces
concrete surfaces that are stain-free, smooth &
non-dusting, and minimizes form clean-up time and
maintenance costs.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Uses
Ideal for environmentally sensitive projects, such as bridge
work over rivers & streams, potable water reservoirs, or
jobsites where spillage or run-off is a concern.
May be used on many types of concrete forms for
architectural concrete, such as wood, steel, aluminum,
fiberglass, plastic, paper, epoxy or urethane coated molds,
masonite, formliners and expanded polystyrene.
Excellent with most elastomeric and PVC formliners.
Spray on equipment such as mixers, pavers, finishing
machines, etc. for easy clean-up and maintenance.
Coverage
Untreated Plywood: 500 - 1,000 ft2 per gal.
MDO: 1,000 - 1,200 ft2 per gal.
HDO: 1,500 ft2 per gal.
Steel, Aluminum, Fiberglass: 1,500 - 2,000 ft2 per gal.
Atlas Bio-Guard performs with urethane formliners!
Read Product Data Sheet and MSDS prior to use.
ATLAS PREMIUM
GOLD RELEASE
Product Code
30.10.11025
55 gallon drums
30.10.11035
30.10.11045
Description
Atlas Premium Gold Release is a high performance,
chemically reactive form release agent that is ideal for
high visual impact precast and architectural concrete.
Premium Gold Release provides easy removal of many
types of concrete forms and leaves a stain-free concrete
surface that is smooth, hard, and ready to accept further
treatments. Premium Gold Release produces beautiful
clean concrete surfaces and helps eliminate bugholes &
surface dusting.
Uses
Ideal for high visual impact precast and architectural
concrete.
May be used on many types of concrete forms, such as
wood, steel, aluminum, fiberglass, plastic, paper, epoxy
or urethane coated molds, masonite and formliners.
Compatible with most elastomeric and PVC formliners.
Treat wood and steel forms to increase the useable life
of form surfaces.
88
Packaging
5 gallon pails
Coverage
Untreated Plywood: 800 - 1,200 ft2 per gal.
MDO: 1,500 - 2,000 ft2 per gal.
HDO: 2,500 ft2 per gal.
Steel, Aluminum, Fiberglass: 2,500 - 3,000 ft2 per gal.
Packaging
Product Code
5 gallon pails
30.10.10525
55 gallon drums
30.10.10535
30.10.10545
www.atlasform.com
Concrete Curing
Compounds
Description
Coverage
Broom Finish: 200 - 400 ft2 per gal.
Smooth Finish: 400 - 600 ft2 per gal.
Vertical Surface: 400 - 500 ft2 per gal.
Packaging
Product Code
Product Code
5 gallon pails
30.11.11025
30.11.11125
55 gallon drums
30.11.11035
30.11.11135
30.11.11045
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Uses
20-FORMING
ACCESSORIES
Moisture Loss
( kg / sq. M)
89
www.atlasform.com
PRODUCTS
70- FOUNDATION
Moisture Loss
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Contractor Committed.
ATLAS RES-CURE
Description
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Concrete Curing
Compounds
ATLAS RES-CURE
WHITE
PRODUCTS
70- FOUNDATION
Description
Atlas Res-Cure White is a white-pigmented, emulsified
resin curing compound for use on exterior, horizontal and
vertical concrete surfaces. This ready-to-use membraneforming cure is formulated to control moisture retention
in freshly placed concrete for proper cement hydration.
Res-Cure White provides excellent early curing
properties; the white pigment keeps the concrete surface
cooler and helps prevent thermal cracking. Ideal for
concrete highways, airport runways, bridges, street & curb
paving, sidewalks, canals, dams, etc.
Atlas Res-Cure White is available in many DOT approved
formulations, including Caltrans, Nevada, Arizona and
Colorado. Ask your Atlas representative for further
information.
90
30.11.11525
55 gallon drums
30.11.11535
30.11.11545
Product Code
Product Code
30.11.12025
55 gallon drums
30.11.12035
30.11.12045
Product Code
5 gallon pails
55 gallon drums
275 gallon totes
www.atlasform.com
30.11.12535
Concrete Curing
Compounds
Description
Packaging
Product Code
5 gallon pails
30.11.13025
55 gallon drums
30.11.13035
30.11.13045
Product Code
5 gallon pails
30.11.14025
55 gallon drums
30.11.14035
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
ATLAS FINISH-FILM
Evaporation Reducer & Finishing Aid
Product Code
5 gallon pails
30.11.16025
55 gallon drums
30.11.16035
PRODUCTS
Uses
www.atlasform.com
70- FOUNDATION
Description
20-FORMING
ACCESSORIES
91
Contractor Committed.
Description
Atlas Cure & Seal-14% is a water-based, acrylic
copolymer solution that provides concrete with both an
excellent cure and seal of the concrete surface. Cure &
Seal-14% forms a clear membrane on the concrete
surface to retain the necessary moisture in freshly
placed concrete for proper strength development and
help prevent plastic shrinkage cracks & dusting. This
multi-funtional product provides a low to medium sheen
finish on the surface and helps resist staining and
penetration of mild chemicals, oils, salts and other
contaminants.
Packaging
Product Code
5 gallon pails
30.12.10025
55 gallon drums
30.12.10035
30.12.10045
Description
Atlas Cure & Seal-30% is a water-based, acrylic
copolymer solution that provides concrete with both an
excellent cure and seal of the concrete surface. Cure
& Seal-30% forms a clear membrane on the concrete
surface to retain the necessary moisture in freshly placed
concrete for proper strength development and help
prevent plastic shrinkage cracks & dusting. This multifuntional product provides a high sheen finish on the
surface and helps resist staining and penetration of mild
chemicals, oils, salts and other contaminants.
Packaging
Product Code
5 gallon pails
30.12.11025
55 gallon drums
30.12.11035
30.12.11045
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
92
www.atlasform.com
Description
Uses
Product Code
5 gallon pails
30.12.11525
55 gallon drums
30.12.11535
Coverage
Broom Finish:
200 - 400 ft2 per gal.
Smooth Finish:
300 - 500 ft2 per gal.
www.atlasform.com
Packaging
Product Code
5 gallon pails
30.12.12025
55 gallon drums
30.12.12035
30.12.12045
93
PRODUCTS
70- FOUNDATION
Uses
Description
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
ATLAS TECH-1315
40-BAR
SUPPORTS
Coverage
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Contractor Committed.
Description
Atlas Expo-SealTM is a high performance concrete curing
& sealing compound that provides a tough and clear protective coating over exposed concrete surfaces. Expo-SealTM is
a unique acrylic co-polymer formulation that will help prevent
shrinkage cracks and produce a concrete surface with maximum
strength and increased resistance to traffic, moisture and stains.
Expo-SealTM is ultraviolet resistant and provides an attractive
finish to architectural concrete. This durable concrete treatment
enhances the beauty of colored concrete, exposed aggregate
and stone.
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
Packaging
Product Code
1 gallon pails
30.12.12520
5 gallon pails
30.12.12525
Description
Atlas Out-Shine Sealer is a heavy-duty, clear, waterbased liquid sealer and dustproofer that is designed
to protect and enhance the appearance of exterior or
interior concrete, exposed aggregate, brick, masonry
and stucco surfaces. This innovative synthetic polymer
formulation provides superior surface protection with
excellent abrasion resistance in areas of high traffic,
resistance to penetration and staining of mild chemicals
and acids, and resistance to weathering and corrosion.
Out-Shine Sealer is a high-solids product that produces
a gloss finish that will not discolor when exposed to
sunlight.
Uses
80- TOOLS &
PLACING
Uses
94
VOC Compliant
Typical Coverage: 200 - 300 ft2 per gal.
Packaging
Product Code
5 gallon pails
30.12.13025
55 gallon drums
30.12.13035
www.atlasform.com
10-FORMING
& SHORING
High Performance, Clear, Water-Based, Penetrating Concrete Hardener, Sealer & Dustproofer
Description
SEALER
HARDENER
DUSTPROOFER
Maintenance
Warranty
Packaging
Product Code
5 gallon pails
30.12.13525
55 gallon drums
30.12.13535
www.atlasform.com
95
PRODUCTS
70- FOUNDATION
USDA Approved
VOC Compliant
Typical Coverage: 200 -400 ft2 per gal.
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Uses
20-FORMING
ACCESSORIES
Contractor Committed.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Bondbreakers for
Tilt-up & Precast
Description
Atlas Easy-Lift FDTM is a high-performance, chemically
reactive, water-based, fast drying cure and bondbreaker
for tilt-up and precast construction. Easy-Lift FDTM is
applied to the concrete casting slab to efficiently prevent
the bonding of subsequent concrete pours. This
premium-grade bondbreaker contains organic
compounds that react with the concrete to produce a
water impermeable barrier on the surface of the
casting slab. When the tilt-up panel is poured, the barrier
restricts the casting slab from absorbing the mix water
from the panel, resulting in an easy to lift panel and a
strong, smooth, uniform and clean panel appearance.
This fast drying formulation allows crews to complete
work more quickly and produces cleaner panels by
reducing occurrence of dirt accumulation on the casting
slab. Easy-Lift FDTM meets all VOC regulations.
Product Code
5 gallon pails
30.15.10525
55 gallon drums
30.15.10535
Maintenance
Coverage
96
www.atlasform.com
Bondbreakers for
Tilt-up & Precast
Description
ETM
Atlas Easy-Lift
is a high-performance, chemically
reactive, water-based cure and bondbreaker for tilt-up
and precast construction. Easy-Lift ETM is applied to the
concrete casting slab to efficiently prevent the bonding of
subsequent concrete pours. This premium-grade
bondbreaker contains organic compounds that react with
the excess lime in concrete. The reaction produces a gel
in the pores of the concrete which effectively forms a
water impermeable barrier. When the tilt-up panel is
poured, the barrier restricts the casting slab from
absorbing the mix water from the panel, which results in
an easy to lift panel and a strong, smooth, uniform and
clean panel appearance. Easy-Lift ETM meets all federal
and local VOC regulations.
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
Premium Water-Based Cure & Bond Breaker for Tilt-Up & Precast
10-FORMING
& SHORING
Coverage
Packaging
Product Code
5 gallon pails
30.15.10025
55 gallon drums
30.15.10035
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
Premium Solvent-Based Cure & Bond Breaker for Tilt-Up & Precast
Description
Packaging
Product Code
5 gallon pails
30.15.11025
55 gallon drums
30.15.11035
Coverage
PRODUCTS
www.atlasform.com
70- FOUNDATION
60-PRECAST
& TILT-UP
97
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Construction
Chemicals
Contractor Committed.
ATLAS CITRUS-CLEAN
Strong & Safe Citrus-Based, Multi-Purpose Cleaner, Degreaser & Stripper
Description
Product Code
1 gallon jugs
30.13.10020
5 gallon drums
30.13.10025
55 gal drums
30.13.10035
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Uses
98
www.atlasform.com
Surface Retarder
10-FORMING
& SHORING
ATLAS TOP-ETCH
Description
20-FORMING
ACCESSORIES
Uses
Atlas Top-Etch is easy to apply & provides a consistent
& economical exposed aggregate architectural finish for
driveways, patios, shopping plazas, sidewalks, etc. After
Top-Etch application, protect the exposed aggregate
concrete with an application of Atlas Expo-SealTM.
VOC Compliant
Typical Coverage: 100 - 150 ft2 per gal.
Atlas Top-Etch
Packaging
Product Code
1 gallon jugs
35.10.10520
5 gallon pails
35.10.10525
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
Features
30-ATLAS TECH
PRODUCTS
Product Code
1 gallon jugs
35.10.11020
5 gallon pails
35.10.11025
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
99
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Liquid Bonding
Agents
Contractor Committed.
ATLAS ACRYL-BOND
Acrylic Latex Bonding Agent & Admixture for Portland Cement,
Patching Materials and other construction products.
Uses
Mix with repair mortars, patching materials, grouts, masonry
coatings and other cement-based products for increased
adhesion and durability.
Bonding new concrete to aged concrete.
Bonding stucco, mortar or plaster to sound surfaces.
Interior and exterior applications.
Above and below grade applications.
Ideal for use with patching materials for concrete floors,
walkways, ramps, walls, columns and beams.
Product Code
1 gallon jugs
30.25.10020
5 gallon pails
30.25.10025
55 gallon drums
30.25.10035
ATLAS H2 BOND
Description
Atlas H2 Bond is a next generation cement bonding agent
and admixture specifically formulated to increase the
flexural, bond and early and overall compressive strength
of modified mixes. Both lab testing and field applications
show increased strengths, and more durable, long lasting
patches will be achieved. Atlas H2 Bond can be used as
an admixture to greatly enhance the adhesion of cement
mortars as well as improve resistance to oil, water, salt and
chemical penetration. Atlas H2 Bond exhibits excellent resistance to freeze/thaw cycles and can be used for interior
or exterior applications.
Uses
Packaging
Product Code
1 gallon jugs
35.25.10520
100
www.atlasform.com
Liquid Bonding
Agents
Uses
Product Code
1 gallon jugs
30.25.11520
40-BAR
SUPPORTS
5 gallon pails
ATLAS INTER-BOND
Description
Product Code
30.25.11020
30.25.11025
55 gallon drums
30.25.11035
1 gallon jugs
5 gallon pails
www.atlasform.com
PRODUCTS
70- FOUNDATION
Uses
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
55 gallon drums
30-ATLAS TECH
PRODUCTS
Description
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
ATLAS TECH-BOND
101
Contractor Committed.
Structural Epoxy
Adhesives
10-FORMING
& SHORING
20-FORMING
ACCESSORIES
BONDING
30-ATLAS TECH
PRODUCTS
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
CRACK
INJECTION
DELAMINATION REPAIR
PRODUCTS
60-PRECAST
& TILT-UP
SEALING
70- FOUNDATION
102
www.atlasform.com
Product Code
30-ATLAS TECH
PRODUCTS
30.20.12523
30.20.12530
40-BAR
SUPPORTS
Uses
Pressure-inject horizontal, vertical or overhead cracks
for a structural repair of concrete structures.
Gravity-feed horizontal concrete and masonry cracks.
Grout anchor bolts, dowels and reinforcing steel.
Mix with aggregate to repair concrete spalls and voids
as an epoxy repair mortar.
Seal interior slabs and exterior above grade slabs to
protect concrete and reinforcing steel from moisture,
chlorides and chemical attack.
Bonding new concrete to hardened concrete or
patching materials to hardened concrete.
Bonding wood, masonry & other construction materials.
Interior or exterior applications.
20-FORMING
ACCESSORIES
Description
Atlas Injection Resin 175 is a two-component, 100%
solids, high modulus, high strength, very low viscosity
epoxy resin adhesive for multiple uses. Injection Resin
175 is an ideal material for repairing concrete cracks
to structurally restore the integrity of concrete
structures. This moisture tolerant epoxy provides
excellent penetration of concrete cracks by pressure
injection or by gravity-feed methods. Injection Resin
175 conforms to ASTM C-881 specifications.
10-FORMING
& SHORING
Packaging
Product Code
30.20.13013
30.20.13023
30.20.13030
www.atlasform.com
PRODUCTS
Uses
Pressure-inject horizontal, vertical or overhead cracks
for a structural repair of concrete structures.
Grout anchor bolts, dowels and reinforcing steel.
Mix with aggregate to repair concrete spalls and voids
as an epoxy repair mortar.
Seal interior slabs and exterior above grade slabs to
protect concrete and reinforcing steel from moisture,
chlorides and chemical attack.
Bonding new concrete to hardened concrete or
patching materials to hardened concrete.
Bonding wood, masonry & other construction materials.
Interior or exterior applications.
70- FOUNDATION
60-PRECAST
& TILT-UP
Description
Atlas LV Injection Epoxy is a two-component, 100%
solids, high modulus, high strength, low viscosity epoxy
resin adhesive for multiple uses. LV Injection Epoxy is
an ideal material for repairing concrete cracks to
structurally restore the integrity of concrete structures.
This moisture tolerant epoxy provides excellent bond
strength for grouting dowels & bolts and may also be
mixed with aggregate to produce a high strength,
fast-setting mortar. LV Injection Epoxy conforms to
ASTM C-881 specifications.
50-FLATWORK
ACCESSORIES
103
Contractor Committed.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Structural Epoxy
Adhesives, Medium Viscosity
Description
Atlas Epoxy Bonder is a two-component, 100% solids,
high modulus, high strength, medium viscosity epoxy
adhesive for multiple uses. Epoxy Bonder is an excellent
material for bonding new concrete to old concrete, bonding
steel to concrete, and for repairing concrete cracks. This
moisture tolerant epoxy provides excellent bond strength for
grouting dowels & bolts and may also be mixed with
aggregate to produce a high strength, fast-setting mortar.
Epoxy Bonder conforms to ASTM C-881 specifications.
Uses
Bonding new concrete to hardened concrete.
Bonding steel to new or hardened concrete.
Use as a binder for concrete, masonry, wood and steel.
Structural crack repairs.
Mix with aggregate for an epoxy grout or mortar.
Grout anchor bolts, dowels and reinforcing steel.
Multi-purpose pourable adhesive.
Interior or exterior applications.
Product Code
30.20.10522
30.20.10527
100% Solids, High Strength, Medium Viscosity, Multi-Purpose Epoxy Adhesive With a Long Pot Life
Description
Atlas LPL Epoxy Bonder is a two-component, 100%
solids, high modulus, high strength, medium viscosity,
multi-purpose epoxy adhesive with an extended setting
time. LPL Epoxy Bonder is an excellent material for
bonding new concrete to old concrete, bonding steel to
concrete, and for coating reinforcing steel as a corrosion
inhibitor. The extended pot life of this epoxy provides extra
time and easy application for placing concrete, repair
mortars, and other materials. This moisture tolerant epoxy
provides excellent bond strength for grouting dowels & bolts
and may also be mixed with aggregate to produce a high
strength epoxy mortar. LPL Epoxy Bonder conforms to
ASTM C-881 specifications.
Uses
Bonding new concrete to hardened concrete.
Bonding steel to new or hardened concrete.
Use as a binder for concrete, masonry, wood and steel.
Apply to reinforcing steel as a corrosion inhibitor.
Structural crack repairs.
Mix with aggregate for an epoxy grout or mortar.
Grout anchor bolts, dowels and reinforcing steel.
Interior or exterior applications.
30.20.11013
30.20.11023
30.20.11030
104
Product Code
www.atlasform.com
Structural Epoxy
Adhesive, Non-Sag
Description
Uses
Product Code
30.20.11522
30.20.11527
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Material
Water
Milk
85-140
140-420
175
LV Injection Epoxy
500
650-900
1,000
E-Pro Overlay
1,800
2,200
Epoxy Bonder
2,500
Karo Syrup
5,000
6,500
Honey
10,000
50,000
Sour Cream
100,000
Peanut Butter
250,000
300,000
Ketchup
PRODUCTS
Castor Oil
70- FOUNDATION
www.atlasform.com
< 50
Viscosity in
Centipoise (CPS)
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
EPOXY
VISCOSITIES
105
Contractor Committed.
Description
Atlas Epoxy Joint Filler is a two-component, 100% solids,
self-leveling, high strength, semi-rigid epoxy joint filler for
industrial concrete floors. This moisture tolerant and easy to
use joint filler provides ultimate support and protection for
saw-cut or formed control joints in concrete floors that are
subjected to hard-wheeled vehicle traffic.
Product Code
30.28.10022
30.28.10027
Coverage
f
roo ints
p
k
jo
pic ol
g, ontr
a
c
-s
on lling ns!
n
fi
o
a &
ati
in
le aling pplic
b
a se
a
ail
av for curity
o
n
Als latio in se
u
m
for
PRODUCTS
70- FOUNDATION
Packaging
Uses
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Semi-Rigid Epoxy
Joint Sealants
106
www.atlasform.com
Joint Sealants
10-FORMING
& SHORING
20-FORMING
ACCESSORIES
Description
Product Code
30.28.10503
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
Description
Product Code
30 oz. cartridges
(12 cartridges per case)
30.28.11510
PRODUCTS
5 gallon pails
www.atlasform.com
70- FOUNDATION
Uses
60-PRECAST
& TILT-UP
Atlas Flex-Thane 230 SL is a one-component, selfleveling, polyurethane construction sealant that cures
to a tough, flexible, watertight rubber when exposed to
moisture present in the atmosphere. This easy-to-use,
highly resilient elastomeric material is capable of
+/- 25% joint movement, making it ideal for sealing
all horizontal joints that are subject to contraction and
expansion. Flex-Thane 230 SL exhibits excellent
adhesion to concrete, wood, glass and metal.
30-ATLAS TECH
PRODUCTS
Uses
107
Contractor Committed.
Super Low Viscosity, Two-Component, Epoxy Healer/Sealer for Protection of New Concrete or Repair of Concrete Cracks
Uses
Description
Atlas E-Pro Seal SLV is a two-component, super low
viscosity, deep-penetrating, high strength, epoxy sealer
designed to protect new concrete and repair deteriorated
concrete. E-Pro Seal SLV has a viscosity below 50 cps
for maximum penetration into fine cracks and pores in the
concrete. To seal the concrete surface and prevent the
migration of moisture, chlorides, and other harmful
contaminants from getting into the concrete and steel
reinforcement. E-Pro Seal SLV is an easy-to-use concrete
healer & sealer that will prolong the life of concrete structures, such as bridges, parking garages, elevated decks or
other concrete elements subjected to harsh weather and
chemical attack.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Packaging
E-Pro Seal SLV
Product Code
30.40.10522
30.40.10527
30.40.10540
E-Pro Seal SLV is very easy to mix and apply. The two
components are completely safe to mix together with a drill
& mix paddle and then apply by flood coat over the surface
with a broom or squeegee. A sand is broadcasted over the
treated surface to absorb any material that did not penetrate
into the concrete.
Read Product Data Sheet & MSDS prior to use.
108
www.atlasform.com
Polymer Overlay
10-FORMING
& SHORING
100% Solids, High Strength, Low Modulus, Low Viscosity Epoxy Binder
for Polymer Concrete Overlays & Patching
Description
20-FORMING
ACCESSORIES
Uses
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
PRODUCTS
Packaging
Product Code
30.40.12527
30.40.12540
www.atlasform.com
70- FOUNDATION
60-PRECAST
& TILT-UP
109
Contractor Committed.
ATLAS TECH-DECK
TM
Tech-DeckTM
Atlas
is high-strength, rapid-setting, water
impermeable polyester concrete patch and overlay
material for the rehabilitation of concrete bridge decks,
parking structures, highways, and other concrete
surfaces that are exposed to heavy traffic, abrasion,
harsh weather and chemical attack. Tech-DeckTM is
composed of a polyester resin binder and select
aggregates to provide a durable wearing surface that is
resistant to moisture, chlorides and other chemicals that
would otherwise penetrate the concrete and corrode steel
reinforcement. Tech-DeckTM cures rapidly, allowing fast
return to lane service.
TM
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Description
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
110
www.atlasform.com
Non-Shrink Grouts
10-FORMING
& SHORING
Description
20-FORMING
ACCESSORIES
Yield
Packaging
Product Code
30.30.10060
40-BAR
SUPPORTS
Uses
Yield
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
ATLAS
HI-FLOW GROUT
Non-Shrink, Non-Metallic, High Flow, Precision Cement-Based Grout
Description
30-ATLAS TECH
PRODUCTS
Uses
Product Code
30.30.10560
www.atlasform.com
111
Contractor Committed.
High Performance, High Early & Ultimate Strength, Non-Shrink, Non-Metallic Cement-Based Precision Grout
Description
Atlas Ultimate HP Grout is a high performance, high
early & ultimate strength, non-shrink, non-metallic
precision structural grout composed of superior natural
aggregates, cements and admixtures. Ultimate HP
Grout exhibits extremely high compressive strength to
permanently support and transfer heavy structural loads.
This superior grout may be mixed at any consistency
from plastic to fluid, and it does not contain chlorides or
any other corrosive materials.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Non-Shrink Grouts
Uses
Grouting applications that require a high early and/or ultimate
compressive strength.
Grouting applications that require precision alignment.
Structural grouting of steel & precast columns & beams.
Machinery, equipment and pump baseplates.
Crane rails.
Grouting anchors, dowels, rods, bolts and inserts.
Power plants, water treatment plants, manufacturing facilities,
amusement park rides, or any other heavy repetitive loading
applications.
Description
Atlas N-A Grout is a special blend of high quality cements
and admixtures to provide a non-aggregate, high flow,
high strength, non-shrink, non-metallic precision grout.
N-A Grout is a unique formulation that may be pumped
through extremely tight clearance areas and over large
distances. This easy to use grout demonstrates high
compressive and flexural strengths for maximum grouting performance. N-A Grout provides high fluidity and
a long working time to meet tough requirements for the
most demanding job conditions.
Yield
Approximately 0.43 ft3 per 50 lb. bag when mixed
with 4.0 quarts of water. At 1 thickness, one 50 lb. bag will
cover approximately 5.2 ft2. When one 50 lb. bag is mixed
with 4.0 quarts of water & 25 lbs. of 3/8 pea gravel, yield is
approximately 0.61 ft3 .
Packaging
Product Code
30.30.11060
Uses
Grouting large, extremely tight clearane areas that
require a grout with no sand for high fluidity and ease of
pumping.
Structural grouting of columns, beams and concrete
piles.
Grouting anchors, dowels, rods, bolts and inserts.
Grouting post-tension cables, tendons, and cable
anchorages.
Packaging
50 lb. bag (63 bags per pallet)
3,000 lb. Supersack
112
www.atlasform.com
Product Code
Concrete Patching
Materials
Description
30-ATLAS TECH
PRODUCTS
Uses
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Yield
Approximately 0.54 ft3 per 50 lb. bag
when mixed with 3.5 quarts of water.
At 1/4 (0.64 cm) thickness, one 50 lb.
bag will cover approximately 26 ft2.
Product Code
30.32.10060
40-BAR
SUPPORTS
Packaging
50 lb. bag (63 bags per pallet)
Description
PRODUCTS
Yield
Approximately 0.54 ft3 per 50 lb. bag
when mixed with 3.5 quarts of water.
At 1/4 (0.64 cm) thickness, one 50 lb.
bag will cover approximately 26 ft2.
Packaging
Product Code
30.32.10560
www.atlasform.com
70- FOUNDATION
Uses
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
113
Contractor Committed.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Structural Concrete
Repair Materials
ATLAS TECH-H2
Description
Atlas Tech-H2 is a polymer modified, cement-based,
two-component, fast-setting concrete repair mortar. This
high performance structural repair mortar provides
excellent durability and superior adhesion for horizontal
concrete patching and overlays. Tech-H2 provides
excellent workability and is formulated with Ferrolok, a
penetrating corrosion inhibitor that helps prevent
deterioration caused by chlorides, moisture and other
harmful materials. Tech-H2 cures to a concrete gray color
to blend with surrounding concrete surfaces and is ideal
for areas that are subject to heavy traffic, abrasion and
harsh weather.
Uses
Heavy-duty concrete patching and overlays.
Trowelable or Form & pour applications; Adjust H2
liquid polymer to acheive desired consistency.
Horizontal surfaces on, above and below grade.
Structural repair applications such as airport runways,
parking garages, warehouse floors, manufacturing
plants, maintenance facilities, loading docks,
walkways, bridges, tunnels, driveways and ramps.
Surfaces subject to freeze/thaw cycles.
Repairs up to 1 neat; up to 4 per lift extended with
aggregate. Available in a H2 Fine formualtion for easy
featheredge application.
Interior and exterior applications.
Yield
Approximately 0.43 ft3 per unit - 50 lb. bag mixed with 1
gallon of H2 Bond. At 1/4 thickness, one unit will cover
approximately 20 ft2 .
Extended: Approximately 0.58 ft3 per unit extended with
25 lbs. 3/8 pea gravel. At 1 thickness,
one extended unit will cover 7 ft2.
Packaging
Product Code
1 gal. jug
30.25.10520
30.32.11060
30.32.11160
114
www.atlasform.com
Concrete Patching
Materials
Description
Packaging
Product Code
30.32.12560
Yield
Approximately 0.43 ft3 per 50 lb. bag when mixed
with 4.5 quarts of water. At 1/2 thickness, one 50 lb. bag will
cover approximately 10 ft2.
Extended: Approximately 0.58 ft3 per unit extended with
15 lbs. 3/8 pea gravel. At 3 thickness, one extended bag will
cover approximately 2.3 ft2.
50-FLATWORK
ACCESSORIES
Very Fast Setting, Heavy-Duty, Flowable Concrete Repair Mortar For Traffic Bearing Applications
Description
60-PRECAST
& TILT-UP
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Uses
20-FORMING
ACCESSORIES
Yield
Uses
Product Code
30.32.12060
Packaging
50 lb. bag (60 bags per pallet)
www.atlasform.com
PRODUCTS
70- FOUNDATION
115
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Concrete
Repair Materials
Contractor Committed.
Description
Atlas E-Pro Patch is a three-component, 100% solids,
high strength, low modulus, non-shrink, multi-purpose
polymer concrete patching mortar for concrete repair.
E-Pro Patch is a convenient pre-packaged repair system
that consists of a high quality epoxy resin, curing agent
and an engineered blend of graded aggregates to
provide a superior concrete patching material. This
moisture tolerant epoxy mortar cures rapidly for minimum
downtime of traffic areas. This semi-rigid epoxy formula
allows for excellent shock absorption when exposed to
heavy traffic, abrasion and freeze-thaw cycles.
Uses
Concrete patching for bridge decks, parking structures,
industrial floors, airport runways, loading docks, piers, or
other concrete surfaces subject to heavy traffic, abrasion,
thermal movements and chemical attack.
Expansion joint nosing repairs.
Low-modulus concrete repair for spalls.
Interior or exterior applications.
Packaging
Product Code
0.5 ft3 unit (1/2 Gal A. 1/2 Gal B & 60 lb. bag of aggregate)
30.32.17580
2.0 ft3 unit (1/2 Gal A. 1/2 Gal B & 4 - 60 lb. bags of aggregate)
30.32.17585
ATLAS TECH-TOP
Self-Leveling Traffic-Bearing Floor Topping for Interior Applications
Description
Atlas Tech-Top is a heavy-duty, cement-based, nonshrinking, self-leveling floor topping designed to produce
a durable, traffic-bearing surface. This one-component
product is a free-flowing pumpable material that is easy
to apply and requires minimal labor and installation time.
Tech-Top provides a walkable surface within 4 hours of
application and will accept light traffic after 24 hours. Also
available in a white color, which provides an excellent
base material for application of concrete stains.
PRODUCTS
70- FOUNDATION
Uses
Produce a level traffic-bearing floor topping over new or
existing concrete surfaces.
Level concrete floors, ceramic tile, terrazzo and wooden
floors.
Resurface rough, old, unlevel or poorly finished
concrete surfaces.
Interior applications.
New or old concrete surfaces.
Ideal for industrial floors, offices, schools, hospitals,
restaurants, and residential floor surfaces that will be
exposed to traffic.
Applications from featheredge to 1 neat; up to 4 per lift
extended with aggregate.
116
Packaging
Product Code
50 lb. bag
30.35.11560
Yield
Approximately 0.43 ft3 per 50 lb. bag when mixed with
4.5 quarts of water. At 1/4 thickness, one 50 lb. bag
will cover approximately 21 ft2.
Extended: Approximately 0.55 ft3 per unit extended with
15 lbs. 3/8 pea gravel. At 1 thickness, one extended
unit will cover approximately 6.5 ft2.
Read Product Data Sheet & MSDS prior to use.
www.atlasform.com
Self-Leveling
Toppings
Description
Uses
Technical Data & Specifications
Working Time (730F): 30 minutes
Set Time: Initial - 45 minutes
Final - 1.0 hours
Compressive Strength:
1 day - 3,100 psi
28 days - 5,000 psi
30-ATLAS TECH
PRODUCTS
Yield
Packaging
50 lb. bag (60 bags per pallet)
ATLAS TECH-TOP-EXT
Self-Leveling Traffic-Bearing Floor Topping for Exterior Applications
Description
Yield
Approx. 0.52 ft3 per 50 lb. bag when mixed with 4.0 quarts of
water. At 1/4 thickness, one 50 lb. bag will cover
approximately 25 ft2. Extended: Approx. 0.62 ft3 per unit
extended with 25 lbs. 3/8 pea gravel. At 1/2 thickness, one
extended unit will cover approximately 14 ft2.
Packaging
Product Code
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
Uses
50-FLATWORK
ACCESSORIES
Atlas Tech-Top EXT is a heavy-duty, cement-based, nonshrinking, self-leveling floor topping designed to produce
a durable, traffic-bearing surface for exterior or interior
applications. This one-component product is a free-flowing
pumpable material that is easy to apply and requires
minimal labor and installation time. Tech-Top EXT
provides a walkable surface within 4 hours of application
and will accept light traffic after 24 hours.
40-BAR
SUPPORTS
Approx. 30-60 ft2 per 40 lb. bag when mixed with 3.0 quarts of
water and applied at 1/8 to 1/16 thick.
Product Code
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
ATLAS TECH-TOP MT
www.atlasform.com
117
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Self-Leveling
Underlayment
Contractor Committed.
Description
Atlas Tech-Level Premier is a high-performance,
cement-based, self-leveling floor underlayment designed
to produce a smooth, level and hard surface prior to the
placement of floor coverings. This one-component,
non-shrink underlayment exhibits superior flowability for
an extremely easy installation. Tech-Level Premier will
reduce labor costs, minimize placement time and
produce a new substrate that will quickly accept
installation of resilient flooring, carpet, ceramic tile,
wood flooring, or other traffic bearing coverings. This
fast-track underlayment provides a walkable surface
within 4 hours of application and will accept floor
coverings after 14 hours.
Uses
Create a smooth, level and hard surface prior to the
placement of floor coverings.
Level concrete floors, ceramic tile, terrazzo and wooden
floors.
Resurface rough, unlevel or poorly finished concrete.
Interior, above and below grade applications.
New or old concrete surfaces.
Ideal for offices, schools, hospitals, restaurants, and
residential floor surfaces that are to be resurfaced with
carpet, tile or other floor coverings.
Applications from featheredge to 1 neat; up to 4 per lift
extended with aggregate.
Packaging
Product Code
30.35.10060
Yield
Approximately 0.51 ft3 per 50 lb. bag when mixed
with 4.5 quarts of water.
At 1/4 thickness, one 50 lb. bag will cover approximately
24 ft2.
Extended: Approximately 0.60 ft3 per unit extended with
15 lbs. 3/8 pea gravel. At 1 thickness, one extended unit
will cover approximately 7.0 ft2.
118
www.atlasform.com
Concrete
Repair Materials
Description
ATLAS DURA-MORTAR
High Performance, Flowable, Shrinkage Compensated, Structural
Repair Mortar with an Integral Corrosion Inhibitor
Packaging
Product Code
10 lb. bag
30.32.13551
Uses
Ideal for patching and repairing concrete bridges,
parking structures, highways, airport runways, loading
docks, warehouse & industrial floors, tunnels, piers,
docks and dams.
Free-flowing mortar for form & pour applications or
for hard to reach areas.
Areas subjected to heavy traffic, abrasion, harsh
weather or freeze/thaw cycles.
Full-depth structural repairs from 3/4 - 10 deep.
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Description
Yield
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Uses
PRODUCTS
Packaging
Product Code
30.32.15060
www.atlasform.com
70- FOUNDATION
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
119
Contractor Committed.
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Concrete Patching
Materials
Description
Atlas V/O-1 Mortar is a high strength, one-component,
polymer modified, cement-based, fast-setting, non-sag,
mortar for vertical or overhead structural concrete repairs. This high-performance patching material is easily
placed on vertical or overhead surfaces without the need
for forms to properly repair parking structures, bridge
structures, docks, piers, etc. This concrete repair
material is specially formulated with Ferrolock,
a penetrating corrosion inhibitor that helps prevent future
deterioration caused by chlorides, moisture and other
harmful materials. V/O-1 Mortar cures to a concrete gray
color to blend-in with surrounding concrete surfaces.
This durable repair mortar has excellent resistance to
harsh weather conditions and freeze/thaw cycles.
Uses
Structurally repair vertical, overhead or horizontal
concrete structures.
Ideal for repairing deteriorated concrete in parking
structures, water treatment plants, bridge structures,
tunnels, dams, docks, piers, ramps, and all concrete
pipes, walls, ceilings & columns.
Surfaces subject to freeze/thaw cycles.
Repairs from 1/8 to 2 per lift.
Interior or exterior applications, above or below grade.
50-FLATWORK
ACCESSORIES
ATLAS STRUCTURAL
REPAIR MORTAR V & O
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
Yield
Approximately 0.43 ft3 per 50 lb. bag
mixed with 9.5 pints of water.
At 1/4 thickness, one 50 lb. bag will
cover approximately 20 ft2 .
Packaging
Product Code
30.32.15560
Uses
Yield
Description
Packaging
50 lb. bag & 1 gal. jug
120
www.atlasform.com
Product Code
30.32.15860
Structural Concrete
Repair Materials
Description
7 lb. pail
30.32.16050
10 lb. bag
30.32.16051
40-BAR
SUPPORTS
Packaging
30-ATLAS TECH
PRODUCTS
Yield
20-FORMING
ACCESSORIES
Uses
10-FORMING
& SHORING
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Description
Yield
One 50 lb. bag will cover approximately
100 ft2 at 1/16 thickness.
Packaging
Product Code
30.32.16558
70- FOUNDATION
Uses
www.atlasform.com
121
Contractor Committed.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Concrete Patching
Materials
ATLAS TECH-321
Description
Atlas Tech-321 is a specially formulated patching and
coating material designed for repairing and restoring
concrete surfaces. Formulated with dry polymers,
Tech-321 has excellent workability and adhesion to
the substrate, and cures to a hard and smooth finished
surface. Ideal for rubbing, smoothing and resurfacing all
horizontal, vertical or overhead concrete surfaces for thin
patching and coating applications. Tech-321 is blended
with white and gray portland cement, very fine aggregates
and special additives to provide a smooth finish over
rough, damaged or discolored concrete. This easy to use,
one component product has excellent weather resistance
and cures to a concrete gray color to blend with existing
surfaces and leave an attractive concrete finish.
Uses
Refinish exposed concrete walls, beams, ceilings,
columns, steps, walkways and patios.
Resurface rough, damaged or discolored concrete
and masonry surfaces.
Repair voids, honeycombs, holes, small cracks, etc.
Horizontal, vertical and overhead applications.
Applications from featheredge to 1/8 thick.
Interior and exterior applications.
Yield
One 50 lb. bag will cover approximately
100 ft2 at 1/16 thickness.
Packaging
Product Code
30.32.17060
ATLAS PLUG
Description
Atlas Plug is a fast-setting hydraulic cement designed
to plug fluid leaks and stop water seepage in concrete
or masonry surfaces. Atlas Plug is a durable,
non-corrosive, non-rusting material that is composed
of cement and proprietary admixtures. When mixed with
water to a putty consistency, Atlas Plug will set in 2-3
minutes and will last the life of the structure.
Uses
Stop water seepage and fluid leaks through cracks,
faults, crevices and holes in concrete and masonry
surfaces.
Ideal for concrete pipes, manholes, culverts, storm
drains, swimming pools, tunnels, dams, water tanks,
sewers, basements, elevator pits, etc.
Underwater applications.
Vertical and horizontal applications.
Interior, exterior, above or below grade applications.
Yield
Approximately 0.50 ft3 per 50 lb. pail
Packaging
Product Code
30.32.18061
122
www.atlasform.com
Cement-Based
Waterproof Coating
Description
Uses
40-BAR
SUPPORTS
Rough Surface
1st Coat: 100 - 200 ft2 per 50 lb. bag
2nd Coat: 200 - 300 ft2 per 50 lb. bag
Packaging
Product Code
30.32.18560
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
ATLAS HYDROSEAL
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
123
Contractor Committed.
ATLAS TECH-HARD
High Performance Mineral Aggregate Dry-Shake Floor Hardener
Uses
Description
Atlas Tech-Hard is a ready-to-use, high performance,
mineral aggregate dry-shake floor hardener designed to
provide a more abrasion resistant concrete floor surface.
This non-metallic, non-rusting hardener is a specially
blended mixture of portland cement, natural silica quartz
aggregate and proprietary admixtures. Tech-Hard may
be used for interior or exterior applications and will
conform to floor flatness specifications. Available in many
colors and an energy efficient light reflective formulation.
40-BAR
SUPPORTS
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Dry-Shake
Floor Hardeners
Coverage
Coverage will vary depending on the particular traffic
volume of the surface:
Light Traffic: 0.75 - 1.0 lbs. per ft2
Moderate Traffic: 1.0 - 1.25 lbs. per ft2
Heavy Traffic: 1.25 - 1.5 lbs. per ft2
Colored Floors: 1.5 - 2.0 lbs. per ft2
Light Reflective: 1.5 - 2.0 lbs. per ft2
Packaging
Product Code
PRODUCTS
Colors
Natural Gray, Light Gray, Battleship Gray, Terra Cotta, Tile
Red, Nile Green, Tan, Brown, Black and Light Reflective
(White). See Dry-Shake Floor Hardeners brochure for color
samples.
70- FOUNDATION
A Complete System
Atlas offers a complete concrete flooring system
to provide the toughness, protection and quality
appearance that will impress the most demanding
users. Five products to achieve a durable and
attractive concrete floor:
Atlas Tech-Hard - dry-shake floor hardener
Atlas Finish-Film - evaporation retardant
Atlas Quantum-Cure - curing compound
Atlas Elite-HS - dustproofer/sealer
Atlas Epoxy Joint Filler - joint sealant
Contact your Atlas representative to discuss how this
complete concrete floor system can benefit you and
your clients.
Read Product Data Sheet & MSDS prior to use.
124
www.atlasform.com
Dry-Shake
Floor Hardeners
Description
Coverage
Coverage will vary depending on the particular traffic
volume of the surface:
Heavy Traffic: 1.25 - 1.5 lbs. per ft2
Colored Floors: 1.5 - 2.0 lbs. per ft2
Light Reflective: 1.5 - 2.0 lbs. per ft2
50-FLATWORK
ACCESSORIES
Packaging
50 lb. bag (60 bags per pallet)
Abrasion Resistance
0.7
0.6
0.5
0.3
0.2
0.1
Metallic Aggregate
Mineral Aggregate
Hardener: Atlas Tech- Hardener: Atlas TechPlate
Hard
www.atlasform.com
125
Iron Aggregate
Topping
PRODUCTS
0.4
70- FOUNDATION
60-PRECAST
& TILT-UP
0.8
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Uses
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
ATLAS TECH-PLATE
Contractor Committed.
EPOXY SYSTEMS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Construction
Chemicals
Pre-Measured Cartridges
Static Mixers
Unitex Quality
Unitex epoxies are manufactured
under strict quality control
requirements to provide
contractors with high performance
and reliable epoxy materials.
Unitex Approvals
Unitex epoxies are approved by
numerous state D.O.T.s across
the country, including Caltrans,
Nevada, Arizona and Colorado.
Also approved by City of Los
Angeles.
ICC Report #5000.
Bulk Containers
PRODUCTS
Pro-Poxy 100 - Low viscosity, high modulus injection resin; 16.5 oz. cartridge.
Pro-Poxy 204 - Medium viscosity, high modulus bonding agent & injection resin; 22 oz. cartridge.
Pro-Poxy 300 - Non-sag viscosity, high modulus, anchoring gel or injection gel; 10 oz., 22 oz. or 51 oz. cartridges.
Pro-Poxy 300 Fast - Fast-setting, non-sag viscosity, high modulus, anchoring gel or injection gel; 10 oz., 22 oz. or
51 oz. cartridges.
Pro-Poxy 400 - Extremely fast-setting, non-sag viscosity, high modulus, epoxy acrylate anchoring gel; 5 oz or 28 oz.
cartridges.
Pro-Flex - Self-leveling, low modulus (semi-rigid) control joint sealant; 22 oz. cartridge.
Pro-Flex Gel - Non-sag viscosity, pick-proof, low modulus (semi-rigid) sealant; 22 oz. cartridge.
* - All unitex epoxies also available in bulk packaging. Contact your Atlas representative for more information.
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Ports
126
www.atlasform.com
Construction
Chemicals
10-FORMING
& SHORING
CHEMICALS &
CEMENTITIOUS PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
Self-Leveling Underlayments
LeveLayer ITM - Premium self-leveling underlayment for
interior applications.
LeveLayer IITM - Self-leveling underlayment for interior applications, lower psi than LeveLayer I.
LeveLayer IIITM - Heavy duty self-leveling floor topping for
interior applications.
LeveLayer IVTM - Heavy duty self-leveling floor topping for
exterior applications.
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
127
Contractor Committed.
DECORATIVE CONCRETE
Design-Crete
The Design-Crete System changes normal gray
concrete surfaces into an exceptional
architectural design. A combination of colors and
special tools permanently imprint newly placed
concrete with authentic textures.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Decorative
Concrete
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
Color Hardeners
Color hardener is a cementitious dry shake material
formulated with carefully balanced and blended
pigments, uniform and resistant to discoloration. Color
hardener increases the density and durability of the
concrete surface, reduces dusting, and minimizes
maintenance.
50-FLATWORK
ACCESSORIES
Color Releases
Color release is a pigmented dry powder release
for the stamping tools designed to be used when a
mottled, antiqued appearance is desired. It is a
pigmented bondbreaker, formulated to prevent
stamping tools from sticking to the concrete.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
Stamping Tools
Stamping tools and mats are molded urethane
patterns that impart a pattern and texture to colored
concrete surfaces. Stamping tools and mats are
imprinted in a variety of patterns and textures for
creating architectural hardscapes for interior or
exterior concrete. Available in rigid, flexible and
texture mats.
128
www.atlasform.com
Decorative
Concrete
20-FORMING
ACCESSORIES
Spray-Rite
Enhance the appearance of existing concrete
surfaces with the Spray-Rite concrete
texturing system. This system can transform
plain, damaged, or stained concrete surfaces
into an exciting textured finish.
10-FORMING
& SHORING
DECORATIVE CONCRETE
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
129
30-ATLAS TECH
PRODUCTS
50-FLATWORK
ACCESSORIES
40-REBAR
SUPPORTS
The GTI Composite Bar Chair is the ideal reinforcement support for poured-in-place decks,
post-tensioned parking decks, tilt-up panels and precast construction. This lightweight bar
support offers superior strength and stability, without the worries of rust or bleed marks.
Available in multiple heights, ranging from 1/2 to 10-1/4.
Contains sharp needles on bottom of foot to provide excellent stability.
Gray color; blends with concrete.
Will not rust; continuous corrosion protection, both on job-site and in concrete.
Virtually no change in strength in temperatures ranging from 00F to 3000F.
Lightweight and extremely strong.
Product Code No.
Available with sand plates for slab on grade applications. Sand plates
40.20.17000
contain protrusion in center of plate to dig into soil for added stability.
60-PRECAST
& TILT-UP
The GTI Composite PC Chair is the ideal reinforcement for precast concrete
slabs and wall panels, tilt-up concrete wall panels and elevated slabs.
Available in multiple heights, ranging from 1/2 to 12 in 1/4 increments.
Gray Color, blends with concrete.
Ball on foot is virtually invisible on concrete surface.
Designed for maximum aggregate flow and concrete consolidation.
Product Code No.
Will cradle all sizes of reinforcing.
40.20.19000
Larger stable footprint.
PRODUCTS
70- FOUNDATION
Contractor Committed.
REBAR SUPPORT
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
REBAR
SUPPORTS
130
www.atlasform.com
REBAR
SUPPORTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
REBAR SUPPORT
Used to support lower slab steel from the slab form. Legs
are spaced on 5 centers. Available in 3/4 to 3 heights in 5
lengths and in plastic dipped, bright basic, galvanized or
stainless steel protected.
Product Code No.
40.15.00000
30-ATLAS TECH
PRODUCTS
40-REBAR
SUPPORTS
40.15.00000
50-FLATWORK
ACCESSORIES
Provides support for upper slab steel eliminating the need for
carrier bars. Fabricated in 2 to 15 heights in 5 lengths with
legs spaced on 8 centers. Available in plastic dipped, bright
basic, galvanized and stainless steel protected.
Special Order
PRODUCTS
70- FOUNDATION
www.atlasform.com
131
10-FORMING
& SHORING
REBAR
SUPPORTS
Contractor Committed.
REBAR SUPPORT
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
40.35.00000
SPACE WHEEL
Side-Form spacer. Designed to fit a wide-range of bar and wire mesh sizes.
Provides minimal surface contact and is lightweight. Covers from 3/8 to 3.
Meets all requirements and qualifies as a CRSI Class 1 Bar Support.
Product Code No.
40-REBAR
SUPPORTS
40.35.00000
E-Z CHAIR
Minimal surface contact. Designed for maximum aggregate flow and
concrete consolidation. Has high load capacity and fits up to #8 rebar.
50-FLATWORK
ACCESSORIES
TOWER CHAIR
60-PRECAST
& TILT-UP
Minimal surface contact. Designed for maximum aggregate flow and concrete
consolidation. Has high load capacity and fits up to #8 rebar. Tower chair
straddles bottom rebar mat in double mat applications.
Product Code No.
40.20.60000
PRODUCTS
70- FOUNDATION
X-CHAIR
132
www.atlasform.com
REBAR
SUPPORTS
20-FORMING
ACCESSORIES
STRONGBACK BOLSTER
10-FORMING
& SHORING
REBAR SUPPORT
For precast, elevated slab, tilt wall, post tension, parking garage decks and side
form spacer applications. Cover height from 3/4 to 3. Manufactured in 32 lengths
in standard boxes. Can be used individually or snapped together to create any
length. Simple to install non-corrosive and lightweight. Meets all requirements and
qualifies as a CRSI Class 1 Bar Support.
Product Code No.
40.10.30000
30-ATLAS TECH
PRODUCTS
PLAIN DOBIES
40-REBAR
SUPPORTS
WIRE DOBIES
50-FLATWORK
ACCESSORIES
Wire dobies are furnished with two 16 gauge wires for attaching to rebar or mesh.
Wire dobies can be used in all concrete slab applications and vertical applications
as a side form spacer. Meets all requirements and qualifies as a CRSI Class 1
Bar Support.
Product Code No.
40.30.00000
COMBINATION DOBIES
60-PRECAST
& TILT-UP
DOWEL DOBIES
PRODUCTS
40.30.00000
70- FOUNDATION
Available in 16 & 16-1/2 gauge, Atlas Tie Wire may be used for multiple jobsite
applications, including securing rebar in place. This professional quality soft
annealed wire is packaged 20 coils per box. Plastic-coated and galvanized wire
available on special order. Product Code No.
40.70.00000
www.atlasform.com
133
D-42
30-ATLAS TECH
PRODUCTS
Length
Wt. Lbs.
per 100
40.70.20400
6.1
40.70.20500
6.9
40.70.20600
7.8
40.70.20700
8.7
40.70.20800
11.3
12
40.70.21200
13
D-50
DBR COUPLER
Special Order
40-REBAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
BAG TIES
D-51
D-52
D-53
D-54
Rebar Size
Thread Dia.
Plain
Product Code No.
#4
1/2
0.2
#5
5/8
0.3
#6
3/4
0.4
#7
7/8
0.5
0.7
#9
1-1/8
1.1
#10
1-1/4
1.7
#11
1-3/8
2.2
Thread Size
Color Code
Thread Data
#4
1/2
Clear
13 NC
#5
5/8
Red
11 NC
#6
3/4
Orange
10 NC
#7
7/8
Blue
9 NC
#8
Green
8 NC
#9
1-1/8
Red
7 NC
#10
1-1/4
Orange
8 UN
#11
1-3/8
Green
8 UN
PRODUCTS
134
Epoxy
Product Code No.
#8
70- FOUNDATION
Contractor Committed.
16 GA. ANNEALED
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
REBAR
SUPPORTS
www.atlasform.com
REBAR
SUPPORTS
D-101
STRAIGHT DOWEL-IN
D-102
Thread Size
#4
5/8
#5
3/4
#6
7/8
#7
#8
1-1/8
#9
1-1/4
#10
1-7/16
#11
1-9/16
90 HOOKED DOWEL-IN
D-103
D-104
STRAIGHT DOWEL-IN THREAD BOTH ENDS
D-101
#4
1-7/8
2
#6
2-3/8
#7
2-1/2
#8
2-1/2
#9
2-3/4
#10
#11
3-1/8
D-103
D-104
D-108
50-FLATWORK
ACCESSORIES
#5
D-102
40-REBAR
SUPPORTS
Rebar Size
30-ATLAS TECH
PRODUCTS
D-108
HEADED DOWEL-IN
20-FORMING
ACCESSORIES
Rebar Size
10-FORMING
& SHORING
DOWEL-IN (D-1)
REBAR SIZES #4 THRU #11
CUSTOM FABRICATED PRODUCT
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
135
D-140
Contractor Committed.
STUDRAIL
Studrail is a cost effective solution to punching
shear at column/slab connections. Studrails reduce
congestion around the column connections, while
at the same time dramatically reducing labor costs.
Studrails are typically used in post tension and
reinforced concrete slabs with direct loading on the
columns. Drop panels, beams and column capitals
may be eliminated to allow efficient use of flying
forms.
Installation of Studrails in foundations will
increase the punching shear capacity at the base of
the columns and in the pile caps. This can provide
significant reduction in slab thickness and
substantial savings in material, excavation and
concrete pumping costs.
Studrails can also be used in place or hairpins
to eliminate congestion in post-tensioned tendon
anchorage zones. One Studrail replaces a series of
hairpins to provide time, labor and material savings.
40-REBAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
REBAR
SUPPORTS
STUDRAIL SPECIFICATION
50-FLATWORK
ACCESSORIES
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
Material Specifications:
Shear Studs - Low carbon steel, C1015 in
accordance with ASTM A108.
Yield Strength - 50,000 psi minimum.
Tensile Strength - 60,000 psi minimum.
Elongation in 2 - 20%
SEISMIC PERFORMANCE
Studrail has been extensively tested and proved to withstand seismic movement and maintain
connection stability long after other connections systems have failed. Lab test results show that
Studrails provide superior ductility and lateral drift capacity compared to other systems.
136
www.atlasform.com
REBAR
SUPPORTS
D-250
Product
Code No.
Outside Dia
(in.)
Length
Wt. Lbs.
Bolt
Qty.
Head Size
Nominal Shear
Torque
4S/CA
#4-13M
40.60.10401
1.3
3.9
1.0
0.5
40
5S/CA
#5-16M
40.60.10501
1.7
4.5
1.8
0.5
80
6S/CA
#6-19M
40.60.10601
1.9
6.3
3.5
0.5
80
7S/CA
#7-22M
40.60.10701
1.9
8.0
4.1
0.5
80
8S/CA
#8-25M
40.60.10801
2.2
10.2
7.6
0.625
180
9S/CA
#9-29M
40.60.10901
2.9
9.0
11.4
0.75
280
10S/CA
#10-32M
40.60.11001
2.9
11.5
15.5
0.75
350
11S/CA
#11-36M
40.60.11101
3.1
14.0
20.5
0.75
350
14S/CA
#14-43M
40.60.11401
3.5
16.5
26.0
0.75
350
18S/CA
#18-57M
40.60.11801
4.3
27.1
60.0
10
0.75
475
40-REBAR
SUPPORTS
For Use On
Rebar Size
(in. mm)
30-ATLAS TECH
PRODUCTS
Coupler
Designation
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Meets or exceeds Min. 135% Fy, CAL TRANS Service ICBO Type 1
Available in Epoxy and Electro-Galvanized.
50-FLATWORK
ACCESSORIES
Product
Code No.
Outside Dia
(in.)
Length
Wt. Lbs.
Bolt
Qty.
Head Size
Nominal Shear
Torque
4L
#4-13M
40.60.10400
1.3
5.5
1.6
0.5
40
5L
#5-16M
40.60.10500
1.7
6.3
2.8
0.5
80
6L
#6-19M
40.60.10600
1.9
4.5
0.5
80
7L
#7-22M
40.60.10700
1.9
9.8
5.5
0.5
80
8L
#8-25M
40.60.10800
2.2
12.3
9.5
0.625
180
#9-29M
40.60.10900
2.9
11.5
15.5
0.75
280
#10-32M
40.60.11000
2.9
14
19.5
0.75
410
11L
#11-36M
40.60.11100
3.1
16.5
24
0.75
410
14L
#14-43M
40.60.11400
3.5
19.1
32
0.75
410
9L
10L
PRODUCTS
For Use On
Rebar Size
(in. mm)
Meets or exceeds Min. 160% Fy, CAL TRANS Service ICBO Type 1, ICBO Type 2
Available in Epoxy and Electro-Galvanized.
www.atlasform.com
70- FOUNDATION
Coupler
Designation
60-PRECAST
& TILT-UP
137
Contractor Committed.
K-4
K-5
40-REBAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
REBAR
SUPPORTS
50-FLATWORK
ACCESSORIES
STATE
AZ
CA
CO
DIAMETER
OF DOWEL
LENGTH
OF DOWEL
O/C
COATING
LB./FT.
AZ9
1-1/4
18
12
EP DWL/PE
7.77
CA9
CA12
1-1/4
1-1/2
18
18
12
12
FULL EP*
FULL EP
7.77
10.65
CO12
3/4
1
1-1/4
1-1/2
18
18
18
18
12
12
12
12
EP DWL
EP DWL
EP DWL
EP DWL
3.59
5.45
7.72
10.76
1
1-3/8
1-1/2
18
18
18
12
12
12
EP DWL
EP DWL
EP DWL/TE
5.54
9.18
10.73
10
11
12
13
14
18
CA8
CA10
CA11
CO6
CO8
CO9
CA10
60-PRECAST
& TILT-UP
CO11
NV
CO14
NV11
NV13
AIRPORT
10
11
12
13
15
18
AP12
PRODUCTS
AP15.1
AP15.2
AP18
DIAMETER
OF DOWEL
LENGTH
OF DOWEL
O/C
COATING
LB./FT.
1
1-1/4
1-1/2
1-1/2
19
20
20
20
12
15
18
18
VARY
VARY
VARY
VARY
5.02
8.10
8.17
10.30
70- FOUNDATION
CO13
NV10
138
www.atlasform.com
REBAR
SUPPORTS
Special Order
Product
Code No.
Pieces
Per Box
Wt. Lbs.
per 100
200
16.0
.306 x 6 long
200
20.0
100
25.0
.306 x 12 long
100
29.0
.306 x 14 long
100
33.0
.306 x 15 long
100
35.0
.306 x 18 long
100
41.0
3/8 x 15 long
100
50.0
1/2 x 18 long
100
100.0
20-FORMING
ACCESSORIES
.306 x 8 long
.306 x 10 long
K-6
K-7
K-8
Dowel Size
Product
Code No.
Packaging
3/4
8.0
250
10.0
250
K-11
Pieces per
carton
1/2 x 4
.020
500
5/8 x 4
.031
500
3/4 x 4
.032
500
3/4 x 6
.038
500
7/8 x 4
.045
500
500
500
1-1/4 x 4
.063
250
1-3/8 x 4
.063
250
1-1/2 x 4
.065
250
PRODUCTS
.058
.059
70- FOUNDATION
1 x 4
1-1/8 x 4
60-PRECAST
& TILT-UP
Description
Plastic
50-FLATWORK
ACCESSORIES
Wt. Lbs.
per 100
40-REBAR
SUPPORTS
DOWEL ALIGNER
Special Order
30-ATLAS TECH
PRODUCTS
10-FORMING
& SHORING
www.atlasform.com
139
K-11
30-ATLAS TECH
PRODUCTS
3/4 x 5
1 x 5
1-1/8 x 5
1-1/4 x 5
1/2 x 5
5/8 x 5
3/4 x 5
7/8 x 5
1 x 5
1-1/8 x 6
1-1/4 x 5
1-3/8 x 6
1-1/2 x 6
1-3/4 x 6
2 x 6
Welded style Dowel Cap Flanges must be notched back when installing caps
on dowels in baskets
K-12
BASKET CLIP
FOR DOWEL BASKETS
Style
K-13
50-FLATWORK
ACCESSORIES
40-REBAR
SUPPORTS
DOWEL CAPS
5/8 x 5
Wt. Lbs.
Wrap-Around
8.7
Nail-Down
6.0
60-PRECAST
& TILT-UP
Dowel Size
Product
Code No.
Weight
Lbs/Ea.
3/8 dia.
.014
5/8 dia.
.012
1 dia.
.016
1-1/4 dia.
.018
1-1/2 dia.
.024
PRODUCTS
70- FOUNDATION
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
REBAR
SUPPORTS
Product
Coverage
Wt.
Packaging
PC110
Fits up to #8 bar
.55 Lbs
40.55.11110
Product
Coverage
Wt.
Packaging
PC-200
.72 Lbs
50 per box
40.55.11200
140
www.atlasform.com
REBAR
SUPPORTS
REBAR
13.86# sq.yd.
#3
#3
11.16# sq.yd.
9.70# sq.yd
#3
3.59# sq.yd.
#3
7.19# sq.yd.
#3
6.35# sq.yd.
#3
5.58# sq.yd.
#3
5.63# sq.yd.
#3
2.42# sq.yd.
#3
4.85# sq.yd.
#3
1.79# sq.yd.
#3
3.59# sq.yd.
#4
#4
#4
#4
#4
#4
#5
#5
#5
#5
#5
#5
Area*
Sq. Inches
Weight Pounds
per ft.
Diameter*
Inches
#3
.11
.376
3/8
#4
.20
.668
1/2
#5
.31
1.043
5/8
#6
.44
1.502
3/4
#7
.60
2.044
7/8
#8
.79
2.670
* Nominal Dimensions
50-FLATWORK
ACCESSORIES
40-REBAR
SUPPORTS
#4
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
#3
10-FORMING
& SHORING
REBAR FABRICATION
60-PRECAST
& TILT-UP
PRODUCTS
Denver, CO
www.atlasform.com
70- FOUNDATION
FABRICATED REBAR
141
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
REBAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-REBAR
SUPPORTS
Old Designation
(by steel wire gauge)
Weight Approx.
per 100 S. F.
6 x 6 - W2.9 x W2.9
6x6x6x6
40.53.24606
6 x 6 -W1.4 x W1.4
6 x 6 x 10 x 10
40.53.24610
4 x 4 -W4.0 x W4.0
4x4x4x4
40.53.10404
85
4 x 4-W2.9 x W2.9
4x4x6x6
40.53.10406
62
6 x 6 - W4.0 x W4.0
6x6x4x4
40.53.20604
58
6 x 6 - W2.9 x W2.9
6x6x6x6
40.53.20606
42
6 x 6 - W2.0 x W2.0
6x6x8x8
40.53.20608
29
6 x 6 -W1.4 x W1.4
6 x 6 x 10 x 10
40.53.20610
21
6 x 6 x 10 x 10
40.53.30610
SHEETS 7 X 20
SHEETS 8 X 20
ROLLS 5 X 150
6 x 6-W1.4 x W1.4
142
www.atlasform.com
FLATWORK
ACCESSORIES
1 x 3
1 x 5
1 x 7
1 x 9
1 x 117/8
1 x 14
1 x 16
30-ATLAS TECH
PRODUCTS
Available in these
standard sizes:
20-FORMING
ACCESSORIES
16 Adjustable Kicker
50.15.00116
CURB FORMS
PRODUCTS
www.atlasform.com
70- FOUNDATION
STREET SMART
60-PRECAST
& TILT-UP
Description
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
8 Adjustable Kicker
10-FORMING
& SHORING
143
1/2 x 1 FLAT
30-ATLAS TECH
PRODUCTS
Length
Wt. Lbs.
Length
12
50.15.50012
1.74
12
Wt. Lbs.
18
50.15.50018
2.70
18
50.15.60018
2.70
24
50.15.50024
30
50.15.50030
3.65
24
50.15.60024
3.65
4.61
30
50.15.60030
36
50.15.50036
4.61
5.56
36
50.15.60036
5.56
6.51
42
50.15.50042
6.51
48
50.15.50048
7.47
48
7.47
9.33
60
9.33
60
3/4 ROUND
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
11/16 SQUARE
Length
Wt. Lbs.
1.24
12
50.15.23012
50.15.22012
1.24
50.15.40018
1.92
18
50.15.23018
50.15.22018
1.92
50.15.40024
2.61
24
50.15.23024
50.15.22024
2.61
50.15.40030
3.29
30
50.15.23030
50.15.22030
3.29
50.15.23036
50.15.22036
3.97
Length
Wt. Lbs.
12
50.15.40012
18
24
30
36
50.15.40036
3.97
36
42
50.15.40042
4.65
42
50.15.23042
50.15.22042
4.65
48
50.15.40048
5.33
48
50.15.23048
50.15.22048
5.33
6.67
60
60
1/2 x 1 FLAT
144
1.74
42
11/16 SQUARE
PRODUCTS
60-PRECAST
& TILT-UP
70- FOUNDATION
Contractor Committed.
STEEL STAKES
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FLATWORK
ACCESSORIES
www.atlasform.com
6.67
3/4 ROUND
FLATWORK
ACCESSORIES
50.50.00000
20-FORMING
ACCESSORIES
A waterproof expansion joint that is the basic joint for almost every type of installation...offers low initial cost, great
durability, and is self-sealing. Available in thicknesses of 1/4, 3/8, 1/2, 3/4, and 1. Slabs available in 36 and 48
widths and standard lengths of 5, 6, and 10. Pre-cut joints available in any desired uniform widths and standard
lengths. Curb and gutter sections and other special shapes and punching for dowels available. Approx. weight: 3
lbs. per square foot based on 1/2 thickness. Meets ASTM D-994 and AASHTO M 33.
10-FORMING
& SHORING
Expansion Joint
Product Code No.
Suggested for use on highways, airport runways, and other similar installations where the joint can be sealed with a
rubber asphalt joint seal. Available in thicknesses of 1/4, 3/8, 1/2, 3/4, and 1 . Slabs available in 5, 10, 11, 12,
and 126 lengths. Pre-cut in uniform widths and lengths as desired. Special shapes and punching are available.
Approximate weight is 1.4 lbs. per square foot based on 1/2 thickness. Meets ASTM D-1751; Federal HH-F-341c,
Type 1 and AASHTO M 153-54, Type 3.
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
PRODUCTS
www.atlasform.com
Formed and compressed under heat and pressure to permit expansion up to 140% of original thickness after
installation which permits the filler to compensate for concrete shrinkage. Normal humidity conditions after
installation activate the self-expanding properties of the cork. Sizes: thicknesses, 1/2, 3/4, and 1. Meets ASTM
D-1752, Type 3; Federal HH-F-341c, Type 2, Class C; AASHTO M-153-54, Type 3.
70- FOUNDATION
Molded of selected cork granules with a resin binder. Use where it is essential that joints are kept filled at all times,
such as in sewage plants, flood walls, filtration plants, etc. Resilient, will compress without extrusion and recover to
95% of original thickness. Sizes: thickness, 1/4, 3/8, 1/2, 3/4, and 1; widths 2 to 36; and lengths of 5 and 10.
Meets ASTM D-1752, Type 2; Federal HH-F-341c, Type 2, Class B.
145
FLATWORK
ACCESSORIES
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
50.55.10050
50.55.10020
50.55.10040
50.55.10030
G-28
50.55.30100
1-1/2
50.55.30150
50.55.30200
SCREED BRACKET
FOR 3/4 DIA. ROUND STAKES
Screed Size
Wt. Lbs.
per 100
Packaging
2 x 4 Lumber
50.15.10001
66.6
54.1
G-29
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
Contractor Committed.
SCREED BRACKET
FOR 3/4DIA. SQUARE STAKES
Screed Size
Packaging
2 x 4 Lumber
50.15.10001
63.9
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
Wt. Lbs.
50.15.01010
1.0 Each
Screed Pad
146
Tapped
Screed Post
Product
Code No.
50.15.21009
12
50.15.21012
15
50.15.21015
18
50.15.21018
24
50.15.21024
36
50.15.21036
www.atlasform.com
Screw Point
Screed Post
Product
Code No.
50.15.20009
12
50.15.20012
15
50.15.20015
18
50.15.20018
21
50.15.20021
24
50.15.20024
30
50.15.20030
36
5015.20036
FLATWORK
ACCESSORIES
G-33
Actual Height
Product Code
No.
3-1/2
50.16.10004
37.0
4-1/2
50.16.10005
45.0
5-1/2
50.16.1006
54.0
20-FORMING
ACCESSORIES
Slab Thickness
Standard Packaging
3-1/2 Screed Key 40 bundles of 100 ft. per skid of 4,000 ft.
4-1/2 Screed Key 40 bundles of 100 ft. per skid of 4,000 ft.
5-1/2 Screed Key 30 bundles of 100 ft. per skid of 3,000 ft.
Available only in full packages of 100 ft.
G-34
Actual Height
Product
Code No.
7-1/2
50.16.10108
71.0
10 to 12
9-1/2
50.16.10110
86.0
50.16.15110
.060
G-35
Wt. Lbs.
per 100
12
50.16.11012
22.0
15
50.16.11015
27.0
18
50.16.11018
33.0
24
50.16.11024
43.0
PRODUCTS
Standard Packaging
12 Stakes 60 cartons of 100 per skid of 6,000 pieces.
15 Stakes 60 cartons of 100 per skid of 6,000 pieces.
18 Stakes 48 cartons of 100 per skid of 4,800 pieces.
24 Stakes 40 cartons of 100 per skid of 4,000 pieces.
70- FOUNDATION
Length
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
Standard Packaging
7-1/2 Load Key 20 bundles of 100 ft. per skid of 2,000 ft.
9-1/2 Load Key 20 bundles of 100 ft. per skid of 2,000 ft.
Available only in full packages of 100 ft.
30-ATLAS TECH
PRODUCTS
LOAD KEY
10-FORMING
& SHORING
SCREED KEY
STAKES NOT INCLUDED (SEE G-37) 24 GA. MATERIAL
www.atlasform.com
147
E-1
Contractor Committed.
E-2
Size
Wt. Lbs.
H height 15 max
93.0
RISER FRAMES
FOR SLAB ON FILL
Special Order
Size
H height 15 max
E-3
RISER FRAMES
SLOPING SLAB
Special Order
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FLATWORK
ACCESSORIES
Size
H height 15 max
E-7
CUT WASHER
Bolt Dia.
Dimension
Plain Product
Code No.
1/2
1-3/8 x 3/32
20.30.80704
4.4
3/4
2 x 5/32
20.30.80504
10.3
2-1/2 x 3/32
20.30.80304
16.7
1-1/4
3 x 3/32
20.30.80204
21
1-1/2
PRODUCTS
D-15
Galvanized
Product Code No.
20.30.80104
PAPER TUBING
Nominal
Tube Dia.
Product
Code No.
Wt. Lbs.
per 100
Approx. Ft.
per Box
3/8
40.45.28012
2.6
500
1/2
40.45.27012
4.7
400
5/8
40.45.26012
5.7
300
3/4
40.45.25012
6.4
200
40.45.23012
7.5
100
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
W width 18 max
148
www.atlasform.com
Wt. Lbs.
per 100
FLATWORK
ACCESSORIES
4 x 8 Sheets
Product Code No.
1/2
50.30.10050
3/4
50.30.10075
50.30.10100
1-1/2
50.30.10150
50.30.10200
2-1/2
50.30.10250
50.30.10300
50.30.10350
50.30.10400
50.30.10500
50.30.10600
30-ATLAS TECH
PRODUCTS
3
3-1/2
20-FORMING
ACCESSORIES
Thickness
40-BAR
SUPPORTS
Units
ASTM test
Density (pcf)
1.0
at 40F
at 75F
Thermal Conductivity
at 40F
at 75F
1.5
2.0
4.1
3.8
C 177
0.24
0.26
0.22
0.24
0.21
0.23
in/(in) (F)
D 696
0.000035
0.000035
0.000035
F
F
up to 167
max 180
up to 167
max 180
up to 167
max 180
Compression strength
10% deflection
p si
D 1621
13-17
21-27
30-38
Flexural strength
p si
C 203
28-35
40-60
60-90
none
none
none
Capillarity
Water vapor transmission
60-PRECAST
& TILT-UP
BTU/(hr)
(sq ft) (F/in)
50-FLATWORK
ACCESSORIES
R Value
1.2-3.0
0.8-1.7
0.6-1.2
C 272
less than 2
p sf
p sf
830
530
830
530
830
530
PRODUCTS
C 355
www.atlasform.com
1" Thickness
5
0
50-85
4" Thickness
5
0
250-350
70- FOUNDATION
perm in
Flame Spread
Fuel Contributed
Smoke Developed
10-FORMING
& SHORING
EXPANDED POLYSTYRENE
149
10-FORMING
& SHORING
FLATWORK
ACCESSORIES
Contractor Committed.
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
Non-Metal Grates
Proof
Load PSI
Material
Length
(in.)
Wt. Lbs.
Locking
Device
2336
15
Termoplastic Heel-proof
19.60
1.1
2840.25A
Proof
Load PSI
2410
2452
2486
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
Length
(in.)
Wt.
Lbs.
Locking
Device
Product
Code No.
Proof
Load PSI
15
Galvanized Steel
39.19
6.0
2810A
2420
15
39.19
6.0
2840A
2440
15
Brass
39.19
8.0
2892A
Material
Length
(in.)
Wt.
Lbs.
Locking
Device
2412
A-B
Galvanized Steel
39.19
2810A
2454
A-B
39.19
2840A
Material
Length
(in.)
Wt.
Lbs.
Locking
Device
150
Galvanized Steel
39.19
6.0
2811A
150
39.19
6.0
2841A
Product
Code No.
Proof
Load PSI
Material
Length
(in.)
Wt.
Lbs.
2422
2442
2442.19
Locking
Device
300
Galvanized Steel
39.19
8.0
2811A
300
39.19
8.0
2841A
300
39.19
8.0
2841A
422
420
410
Product
Code No.
Material
Length
(in.)
Wt.
Lbs.
2498.04SS
2459
39.19
19.0
39.19
1.5
Slotted Grates
Product
Code No.
Proof
Load PSI
Material
Length
(in.)
Wt.
Lbs.
Locking
Device
Product
Code No.
Proof Load
PSI
Material
Length
(in.)
Wt. Lbs.
Locking
Device
2501
300
Ductile Iron
19.6
12
2811B
2502
300
Ductile Iron
19.6
2811B
2503
600
Ductile Iron
19.6
11
2811B
Proof
Load PSI
Material
Length
(in.)
Wt.
Lbs.
Locking
Device
2504
600
Ductile Iron
19.6
10.0
2811B
Product
Code No.
Proof Load
PSI
Material
Length
(in.)
Wt.
Lbs.
Locking
Device
2505
300
Ductile Iron
19.6
10
2811B
2506
300
Ductile Iron
19.6
2811B
Proof
Load PSI
Material
Length
(in.)
Wt.
Lbs.
Locking
Device
2532
600
19.6
30
2815F
2534
600
19.6
25
2815F
PRODUCTS
Material
Product
Code No.
70- FOUNDATION
313
Product
Code No.
502
150
Load
Class
Material
Length
(in.)
Wt. Lbs.
Locking
Device
2510MFFAF
N/A
Ductile Iron
19.6
9.0
N/A
Note: One is required at each end run, one at each tee, two are required at 90 turn.
504
www.atlasform.com
FLATWORK
ACCESSORIES
2564
Proof Load
PSI
600
Material
Ductile Iron
Length
(in.)
19.6
Wt. Lbs.
Locking
Device
12
N/A
All ductile iron grates and frames available with galvanized coating. All ductile and cast
grates have compatible anchor frames.
Load Class
Material
Length
(in.)
Wt.
Lbs.
Locking
Device
2511AF
300
19.6
21.0
2815B
2512AF
300
19.6
15.0
2815B
2513AF
600
19.6
18.0
2815B
2514AF
600
19.6
17.0
2815C
2515AF
300
19.6
17.0
2815B
2516AF
300
19.6
11
2810AXL
20-FORMING
ACCESSORIES
Product
Code No.
Product
Code No.
10-FORMING
& SHORING
532
505
510MFF
30-ATLAS TECH
PRODUCTS
512AF
Proof Load
PSI
Material
Length
(in.)
Wt.
Lbs.
Locking
Device
2720
150
39.19
4.0
2887
2722
300
39.19
6.0
2887
722
50-FLATWORK
ACCESSORIES
Product
Code No.
40-BAR
SUPPORTS
60-PRECAST
& TILT-UP
Cross-Sectional View
Channel With In-Lay Type Grate
Cross-Sectional View
Channel Frame And Grate
PRODUCTS
70- FOUNDATION
www.atlasform.com
151
Contractor Committed.
Non-sloping channel
locations - All have 100
mm (4) and 150 mm
(6) vertical outlet.
The PolyDrain Trench Drain System consists of 30 interlocking channels, each one meter (39.19) long. Special non-sloping
channels can be inserted at specified intervals in order to extend channel runs. Catch basins, horizontal outlet plates, closed
end plates and vertical outlet plate adapters can be installed at designated locations. Closed end plates terminate channel
runs. NOTE: Always begin at the appropriate outlet channel, working towards the shallow end.
PRODUCTS
Trench Drain
Product Code No.
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FLATWORK
ACCESSORIES
50.40.00000
152
www.atlasform.com
FLATWORK
ACCESSORIES
Moistop Underslab
With a water vapor permeance of less than .30
perms, Moistop Underslab exceeds ASTM E-1745
requirements for water vapor permeance, providing
an extremely effective barrier to moisture vapor
transmission through concrete slabs. Packaging:
2,000 sq. ft. rolls (96 x 250); 4.2 lbs. per 100 sq. ft.
Thickness is 12 mils.
153
www.atlasform.com
PRODUCTS
50.60.00000
The Boot
The Boot is engineered to help in the installation of
underslab vapor retarders around pipes. It makes installations easier while maintaining the integrity of the
vapor retarding layer and jobsite durability. Its unique
design makes sealing around pipes, conduits and
other penetrations of any size quick and easy.
70- FOUNDATION
Vapor Retarders
Product Code No.
Moistop Tape
Moistop Tapes excellent adhesive properties help
assure tight joints and smooth underslab installations
while maintaining the vapor retarding characteristics
required by ASTM E-1745 specifications.
Available in 4 inch wide x 108 foot rolls.
60-PRECAST
& TILT-UP
Packaging:
Ultra 15 - 1,440 sq. ft. rolls (144 x 120); 7.3 lbs. per
100 sq. ft. Thickness is 15 mils.
Ultra 10 - 3,000 sq. ft. rolls (15 x 200); 4.8 lbs. per
100 sq. ft. Thickness is 10 mils.
Ultra 6 - 3,000 sq. ft. rolls (240 x 150); 2.8 lbs. per
100 sq. ft. Thickness is 6 mils.
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
Moistop Ultra
The Moistop Ultra family represents a new generation
of concrete underslab products designed to provide
incredible durability on the jobsite and lasting
protection against moisture. With a water vapor
permeance of .02 perms and a tensile strength and
puncture resistance that outperforms even thicker
membranes, Moistop Ultra 15, Ultra 10 and Ultra 6
exceed all ASTM E-1745 standards for Class A, B
and C underslab vapor retarders.
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
VAPOR RETARDERS
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FLATWORK
ACCESSORIES
Contractor Committed.
Product
Description
TM
/ Ultracure SUN
TM
UltraCure NCFTM and Ultracure SUNTM are moistureretaining coverings that are natural colored cellulose
fabrics with a 3 mil clear (NCF) or reflective (SUN)
impervious coating applied to one side. Ultracure
SUNTM has a non-perforated reflective vapor barrier
coating designed to help provide protection against
UV degradation. Both non-staining fabrics have a
tensile strength meeting ASTM D-882 and a mimimum
retention capacity of 6.5(g). Material shall meet or
exceed ASTM C171-03, ASTM C171-97a and
AASHTO M171-00, standard specifications for sheet
material for curing concrete slabs or pavement.
Product
Code No.
Packaging
UltraCure NCF
50.65.31200
8 x 200 roll
UltraCure SUN
50.65.33200
8 x 200 roll
Property
Value
Basis Wt.
151 g/sm
ASTM D-2103
Caliper
1.4 mm
ASTM D-5199
4783 psi
4900 psi
ASTM D-882
Elongation TD
MD
721%
622%
ASTM D-882
Elmendorf
1500 g
350 g
ASTM D-1992
Dart
300 g
ASTM D-1709
Reflectance
96%
ASTM E-1447
Tensile
UltraCureDOTTM
UltraCureDOTTM features super absorbant fibers that effectively trap
water and serve as a hydrating reservoir for the slab as it cures.
UltraCureDOTTM also features a perforated white reflective poly
backing which provides constant visual reinforcement that the slab
remains wet for the entire curing period. With proper installation,
UltraCureDOTTM provides constant hydration and maintains a 100%
relative humidity condition on the slab for the entire 14 day curing
period.
TD
MD
TD
MD
Superior Hydration
Increased cured concrete strength
User Friendly
Cost Effective
Green- LEEDs points & recyclable
Greater blanket wind resistance
Product
Description
Product
Code No.
Packaging
UltraCure DOT
50.65.30100
8 x 100 roll
McTech EZ Cover
EZcoverTM is a natural colored cellulose fabric
designed to help protect slab-on-grade or other Product Code No.
flooring during the construction process. The
50.66.30050
product is available in standard width 8 rolls
weighing approximately 100 lbs each with each
roll covering approximately 400 square feet on
application.
Property
Value
ASTM Test Method
Basis Wt.
1200 g/sm
ASTM D-2103
Caliper
3.18mm
ASTM D-5199
Tensile
TD-8100psi
MD-8800psi
ASTM D-882
Dart
2300g
ASTM D-1709
Reflectance
81%
ASTM E-1447
Synthetic Burlene
Code No.
154
Poly Burlap
Combination of 10 oz. burlap and 5 mil
white opaque polyethylene.
ASTM C-171 for curing concrete
www.atlasform.com
Curing
Blankets &
Burlap
Product
Code No.
50.65.00000
FLATWORK
ACCESSORIES
20-FORMING
ACCESSORIES
The EZform Dowel System was designed to save concrete contractors time and money while
simplifying the process of creating large slabs-on-grade, and other concrete floors where joint
forming and load transfer is critical. The system consists of patent pending elements including:
the reusable EZform board, the EZdowel load transfer plate dowel, EZedge, and the
EZbasket.
The EZform System saves owners and contractors
money by eliminating many costly on-site labor tasks
associated with large SOG projects.
30-ATLAS TECH
PRODUCTS
Eliminated tasks:
On-site sawing to create chamfer
Measuring for dowel holder alignment
Nailing dowel holders
Repairing crushed or paste filled dowel holders
Product
Code No.
EZ Form 4 x 16
50.11.16040
EZ Form 51/2 x 16
50.11.16055
EZ Form 6 x 16
50.11.16060
EZ Dowel 1/4
40.45.41400
40-BAR
SUPPORTS
Product
Description
60-PRECAST
& TILT-UP
Emery Non-Slip
PRODUCTS
NON-SLIP FINISH
70- FOUNDATION
www.atlasform.com
50-FLATWORK
ACCESSORIES
SPEED DOWEL
40.45.30000
10-FORMING
& SHORING
155
Contractor Committed.
WATERSTOPS
Ribbed with Center Bulb
Ribbed with center bulb waterstops are employed in expansion joints where
movement between members is anticipated. They are generally used above grade but in
fact are a universal design and can be used in any type of joint above or below grade.
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FLATWORK
ACCESSORIES
Flat Ribbed
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
156
www.atlasform.com
FLATWORK
ACCESSORIES
Split Ribbed
20-FORMING
ACCESSORIES
Dumbbell
10-FORMING
& SHORING
WATERSTOPS
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
50.72.11121
50.72.12110
50.72.12130
50.72.12210
www.atlasform.com
50.72.11120
PRODUCTS
Description
50.72.11110
70- FOUNDATION
157
HENRY HYDRO-FLEX
WATERSTOP
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
50-FLATWORK
ACCESSORIES
50.73.11000
HENRY SYNKO-FLEX
WATERSTOP
PRODUCTS
60-PRECAST
& TILT-UP
70- FOUNDATION
Contractor Committed.
WATERSTOPS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
FLATWORK
ACCESSORIES
158
Synko Flex
50.73.12000
50.73.12100
www.atlasform.com
FLATWORK
ACCESSORIES
20-FORMING
ACCESSORIES
30-ATLAS TECH
PRODUCTS
Features
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
Material Specifications
Product
Description
Product
Code No.
2 x 2 Yellow Panels
50.20.11220
2 x 2 Yellow Panels
50.20.11225
2 x 3 Yellow Panels
50.20.11230
2 x 2 Red Panels
50.20.12220
2 x 2 Red Panels
50.20.12225
2 x 3 Red Panels
50.20.12230
50.20.16225
2 x 3 Black Panels
50.20.16230
PRODUCTS
50.20.16220
70- FOUNDATION
2 x 2 Black Panels
2 x 2 Black Panels
60-PRECAST
& TILT-UP
10-FORMING
& SHORING
www.atlasform.com
159
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
P-24
Contractor Committed.
Description
Packaging
5 x 7 TIE
P-25
P-30
Bolt Dia.
20.28.60010
1/2
5.5
20.28.60020
3/4
8.0
20.28.60030
16.0
40-BAR
SUPPORTS
Special Order
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Part No.
P-31
Galvanized
Product Code No.
Epoxy Coated
Product Code No.
Wt. Lbs.
CS425
1.9 Ea.
CS625
2.5 Ea.
CS825
3.5 Ea.
CS435
2.2 Ea.
CS635
3.0 Ea.
CS835
4.3 Ea.
CS445
2.9 Ea.
CS645
4.2 Ea.
CS845
5.2 Ea.
PRODUCTS
Part No.
70- FOUNDATION
Special Order
160
Galvanized
Product Code No.
Epoxy Coated
Product Code No.
Wt. Lbs.
SA 1425
2.1 Ea.
SA 1625
2.8 Ea.
SA 1825
3.9 Ea.
SA 1435
2.7 Ea.
SA 1635
3.4 Ea.
SA 1835
4.5 Ea.
www.atlasform.com
PRECAST
& TILT-UP
P-32
Part No.
Galvanized
Product Code No.
Epoxy Coated
Product Code No.
Wt. Lbs.
1.4 Ea.
CE 806
2.6 Ea.
CE 808
3.8 Ea.
CE 810
2.0 Ea.
CE 812
3.2 Ea.
CE 814
5.4 Ea.
P-51
Product Code
No.
Wt. Lbs.
60.10.30002
5.0 Ea.
60.10.30004
7.5 Ea.
60.10.30008
17.0 Ea.
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
CE 804
10-FORMING
& SHORING
3.0 Ea.
40-BAR
SUPPORTS
20
39.0 Ea.
P-50
Wt. Lbs.
60.10.25002
5.8 Ea.
60.10.25004
9.2 Ea.
60.10.25008
17.8 Ea.
60-PRECAST
& TILT-UP
Safe Working
Loads-Tons
50-FLATWORK
ACCESSORIES
PRODUCTS
70- FOUNDATION
www.atlasform.com
161
P-52
Contractor Committed.
Size
Dia. X Length
Plain Product
Code No.
Packaging
Wt. Lbs.
per 100
3/8 x 2-5/8
60.11.70102
250
13.3
3/8 x 3-3/8
60.11.70103
200
15.5
3/8 x 4-3/4
60.11.70105
200
19.0
3/8 x 8
60.11.70108
100
29.0
3/8 x 9-1/2
60.11.70109
100
38.0
9/16 x 2-3/4
60.11.70202
125
32.0
9/16 x 3-3/8
60.11.70203
125
39.0
9/16 x 5-1/2
60.11.70205
100
51.5
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
9/16 x 6
60.11.70206
100
55.0
9/16 x 6-3/4
60.11.70207
50
61.0
9/16 x 11
60.11.70211
50
96.0
3/4 x 3-3/4
60.11.70403
50
83.0
3/4 x 4-1/4
60.11.70404
50
88.0
3/4 x 4-3/4
60.11.70405
50
96.4
3/4 x 5-1/2
60.11.70406
50
100.0
3/4 x 7-1/8
60.11.70407
25
128.0
3/4 x 9-1/2
60.11.70409
25
157.4
3/4 x 14
60.11.70414
212.0
3/4 x 19
60.11.70419
275.0
1-3/32 x 4-3/4
60.11.70805
215.0
1-3/32 x 5-1/4
1-3/32 x 6-3/4
60.11.70807
275.0
1-3/32 x 10
60.11.70810
395.0
1-3/32 x 10-3/8
1-3/32 x 26-3/4
60.11.70826
883.0
20
1-1/2 x 10
60.11.72010
970.0
20
1-1/2 x 19-3/4
60.11.72020
1306.0
461.0
PRODUCTS
P-52-W
P-53
2 Ton
9/16 x 2-3/4
40.0
4 Ton
3/4 x 3-3/4
82.0
Product
Code No.
Size Dia. X
Length
Packaging
Product Code
No.
Wt. Lbs.
per 100
3/8 x 2-5/8
250
14.0
9/16 x 3-1/2
100
40.0
3/4 x 4-3/4
50
92.0
1-3/32 x 7-1/8
20
20
1-1/2 x 9-5/8
60.11.90500
60.11.91000
290.0
60.11.92000
750.0
162
Wt. Lbs.
per 100
70- FOUNDATION
60-PRECAST
& TILT-UP
Contact Atlas Construction Supply for concrete strength requirements to develop Safe
Working Loads. DOT certified SL Anchors are also available by special order.
www.atlasform.com
PRECAST
& TILT-UP
P-54
Product
Code No.
Wt. Lbs.
per 100
2 ton
60.10.76200
0.1 Ea.
4 ton
60.10.76400
0.2 Ea.
P-56
30-ATLAS TECH
PRODUCTS
Dia.
Wt. Lbs.
2-3/8
200
18.0
100
35.0
3-3/4
50
67.6
4-3/4
25
100.0
20
6-3/8
10
300.0
P-56-PL
Product Code
No.
Packaging
2-1/2
150
3-1/4
150
100
50
P-56-R
60-PRECAST
& TILT-UP
Safe Working
Loads-Tons
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
Packaging
20-FORMING
ACCESSORIES
Size
10-FORMING
& SHORING
Packaging
Wt. Lbs.
per 100
2-3/8
60.10.70100
50
13.0
60.10.70200
20
25.0
3-3/4
60.10.70400
20
50.0
4-3/4
60.10.70800
20
100.0
20
6-3/8
10
300.0
www.atlasform.com
Dia.
PRODUCTS
Safe Working
Loads-Tons
70- FOUNDATION
163
P-57
P-58
Packaging
Wt. Lbs.
25
0.8 Ea.
25
1.5 Ea.
20
3.5 Ea.
Packaging
P-59
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
Product
Code No.
Safe Working
Loads-Tons
P-60
PRODUCTS
60-PRECAST
& TILT-UP
70- FOUNDATION
Contractor Committed.
Special Order
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
164
Wt. Lbs.
per 100
100
1.0
60.10.79200
50
2.0
60.10.79400
25
3.0
Rebar Size
1 ton anchor
#4
2 ton anchor
#4
4 ton anchor
#4
60.11.12100
173.0
8 ton anchor
#6
60.11.13100
438.0
Wire Dia.
2 ton anchor
0.375
60.11.11200
94.0
4 ton anchor
0.44
60.11.12110
150.0
128.0
156.0
Rebar Size
1 ton anchor
.306 wire
2 ton anchor
#3
4 ton anchor
#5
Wt. Lbs.
per 100
82.0
75.0
60.11.10305
134.0
8 ton anchor
#6
60.11.10306
600.0
20 ton anchor
#8
60.11.10308
1913.0
www.atlasform.com
PRECAST
& TILT-UP
P-61
Special Order
Safe Working
Loads-Tons
25
42.0
25
66.0
P-62
20-FORMING
ACCESSORIES
Packaging
10-FORMING
& SHORING
Special Order
For Use With
4 ton
7/16 x 3/4
8 ton
30-ATLAS TECH
PRODUCTS
Size
5/16 x 3/4
P-63
Product
Code No.
Packaging
Wt. Lbs.
per 100
5/16 x 3
100
9.0
7/16 x 3
50
23.0
7/16 x 3
50
28.0
7/16 x 3
25
30.0
20
12mm x 3-3/4
10
60.0
For Wing Nut see P-64, Use with P-56 & P-56-R Recess Plug.
P-63-PL
Safe Working
Loads-Tons
Packaging
2, 4, & 8
3/8 x 6
50
60-PRECAST
& TILT-UP
Special Order
Product
Code No.
FOR USE WITH P-56-R RECESS PLUG AND P-56-R ATTACHMENT NUT
Special Order
Fixed
Product Code
No.
Wt. Lbs.
8mm
0.15 Ea.
12mm
0.15 Ea.
12mm
0.15 Ea.
12mm
0.15 Ea.
www.atlasform.com
Free
NC Thread
Stud Dia.
PRODUCTS
P-63-R
70- FOUNDATION
50-FLATWORK
ACCESSORIES
Safe Working
Loads-Tons
40-BAR
SUPPORTS
Special Order
165
Contractor Committed.
P-64
Special Order
P-64-PL
5/16
1 ton
7/16
2, 4 & 8 ton
12mm
20 ton
Size
Dia.
Packaging
2, 4 & 8 ton
60.10.28208
50
Wt. Lbs.
per 100
3.0
6.0
20.0
24.0
20
47.0
50-FLATWORK
ACCESSORIES
P-66-PL
P-67-PL
P-68-PL
Safe Working
Loads-Tons
Tapped for
Bolt Size
Packaging
Wt. Lbs.
per 100
1
2
5/16 dia.
50
2.0
7/16 dia.
50
5.0
7/16 dia.
50
9.0
7/16 dia.
25
16.0
20
5/8 dia.
10
38.0
Product
Code No.
Safe Working
Loads-Tons
1
.75 x 1.5
P-66-PL
60.10.21222
.75 x 1.6875
P-66-PL
60.10.21241
.822 x 1.6875
P-66-PL
.822 x 2.375
P-67-PL
.75 x 1.5 x 4
P-67-PL
60.10.21221
.75 x 1.6875 x 4
P-67-PL
60.10.21242
.822 x 1.6875 x 4
P-67-PL
60.10.21281
.822 x 2.375 x 4
P-68-PL
.625 x 1.75
P-68-PL
.875 x 2.5
P-68-PL
1.375 x 3.25
P-68-PL
1.75 x 3.75
166
Plate Size
Width X Length
P-66-PL
4
PRODUCTS
60-PRECAST
& TILT-UP
Safe Working
Loads-Tons
P-65
P-66
70- FOUNDATION
Size
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
www.atlasform.com
PRECAST
& TILT-UP
Special Order
Thread Size
Wt. Lbs.
8 mm
0.2 Ea.
12 mm
0.2 Ea.
12 mm
0.3 Ea.
12 mm
0.3 Ea.
P-69-M
P-56-MS
Wt. Lbs.
0.56 Ea.
4 Ton
0.63 Ea.
8 Ton
1.06 Ea.
30-ATLAS TECH
PRODUCTS
2 Ton
20-FORMING
ACCESSORIES
Safe Working
Loads-Tons
P-66-R
10-FORMING
& SHORING
Wt. Lbs.
0.03 Ea.
Size
40-BAR
SUPPORTS
P-74
4 Ton
Type
Wt. Lbs.
3-1/8
4UA444
60.11.50014
0.32 Ea.
3-3/4
5UA444
60.11.50015
0.75 Ea.
6-7/16
3-3/4
5UA671
60.11.50215
1.00 Ea.
7-3/8
4-3/4
6UA444
60.11.50016
0.75 Ea.
7-9/16
4-3/4
6UA671
60.11.50216
1.00 Ea.
9-7/8
6-3/4
8UA671
60.11.50218
1.50 Ea.
60-PRECAST
& TILT-UP
A
5-1/4
P-75
P-76
50-FLATWORK
ACCESSORIES
8 Ton
Description
.444 Anchor
Wt. Lbs.
1.34 Ea.
45 Degrees
.444 Anchor
1.34 Ea.
90 Degrees
.671 Anchor
1.34 Ea.
45 Degrees
.671 Anchor
1.34 Ea.
PRODUCTS
Type
90 Degrees
Dimensions
60.25.81000
400
40.0
www.atlasform.com
167
P-78
PANEL PADS
70- FOUNDATION
P-80
30-ATLAS TECH
PRODUCTS
1/16 x 2 x 4
or
1/16 x 4 x 4
2000
39.0
1000
39.0
1/8 x2 x 4
or
1/8 x 4 x 4
2000
78.0
1000
78.0
1/4 x 2 4
or
1/4 x 4 x 4
1000
78.0
500
78.0
1-16 x 3 x 3
2000
44.0
1/8 x 3 x 3
2000
86.0
1/4 x 3 x 3
1000
86.0
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
1-1/16 x 4 x 6
60.25.71020
50
50.0
1-1/16 x 4 x 4
100
65.0
1-1/16 x 3 x 3
100
39.0
1-1/16 x 6 x 6
50
71.0
1-1/8 x 4 x 6
60.25.71010
GTI Shimpacks 4 x 6
60.25.72020
P-82
PRODUCTS
60-PRECAST
& TILT-UP
SHIM STRIPS
Item and Size
P-81
1/2 x 2 x 48
1200 LF
135.0
1/4 x 2 x 48
600 LF
135.0
1/8 x 2 x 48
60.25.81224
70- FOUNDATION
Contractor Committed.
Special Order
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
168
www.atlasform.com
PRECAST
& TILT-UP
P-83
Thickness
Size
1/16
1/8
2 x 3
1000
10.0
2 x 3
1000
20.0
1/4
2 x 3
500
20.0
1/16
3 x 4
1000
22.0
1/8
3 x 4
1000
44.0
1/4
3 x 4
500
44.0
20-FORMING
ACCESSORIES
Pieces per
Carton
Minimum order 100 pieces of each thickness and size. Other sizes
available on special order. Note: Slot width 13/16.
Dia.
400
600
800
P-84
Plugs per
Carton
1000
27.0
60.25.86600
2000
84.0
1000
72.0
Special Order
Product
Thread Size x
Insert Length
P10T
10-24 x 11/16
1000
7.0
P15T
1/4 x 1-1/2
1000
45.5
3/8 x 1
500
22.0
P25T
3/8 x 1-3/8
400
32.2
P35T
1/2 x 1-1/2
150
40.5
P36T
1/2 x 2-7/8
50
27.1
P45T
5/8 x 1-11/16
150
46.6
36.4
50
3/4 x 1-11/16
50
11.5
P56T
3/4 x 3
50
23.8
P25TOB
3/8 X 1-3/8
400
23.5
P35TOB
1/2 X 1-1/2
150
35.2
P25A
3/8
500
7.9
P35A
1/2
100
3.8
P45A
5/8
100
7.8
P55A
3/4
100
5.2
1/2
100
18.8
20.42.85302
PRODUCTS
5/8 x 2-7/8
P55T
70- FOUNDATION
P46T
60-PRECAST
& TILT-UP
P24T
P-86
P-87
P-88
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
Core Plugs are designed for manufacturers of prestressed hollow core planks.
They are lightweight, easy to insert and effectively block off grout flow to ensure
bearing through the ends of the planks onto the sill and foundation.
The exclusive wall taper design of these plastic core plugs assures a tight
interference fit. Core Plugs are available for most sizes of spancrete, flexicore,
spiroll, dycore and dynaspan. Other shapes and sizes are available. Plug numbers refer to the diameter of the core holes and not to the thickness of the plank.
30-ATLAS TECH
PRODUCTS
10-FORMING
& SHORING
20.42.85301
www.atlasform.com
169
P-91-S
P-91-NC
P-91-RB
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
Length
2-3 ton
10.38
Pieces per
Box
Each
3.65
4-6 ton
12.50
Each
8.65
8-10 ton
16.50
Each
19.87
Special Order
Load Range
Length
2-3 ton
30
Each
3.65
4-5 ton
36
Each
8.65
8-10 ton
36
Each
19.87
P-92
P-92-P
P-92-DP
P-92-AH
Pieces per
Box
Wt. Lbs.
Each
3 ton
Each
0.35
6 ton
Each
0.65
10 ton
Each
1.75
Product
Code No.
Length
Product
Code No.
Pieces per
drum
Wt. Lbs.
per 100
2 ton
8.38
450
225
4 ton
11.88
200
541
6 ton
13.25
100
909
8 ton
13.25
100
1046
Length
Product Code
No.
Pieces per
drum
Wt. Lbs.
per 100
2 ton
8.38
300
225
4 ton
11.88
150
541
6 ton
13.25
75
909
8 ton
13.25
75
1046
Load Range
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
Product
Code No.
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
Contractor Committed.
Length
Product Code
No.
Pieces per
drum
2 ton
8.38
300
242
4 ton
11.88
150
583
6 ton
13.25
75
951
8 ton
13.25
75
1088
170
Length
Product Code
No.
Pieces per
drum
Wt. Lbs.
per 100
2 ton
8.50
300
230
4 ton
11.25
150
550
8 ton
13.75
75
1050
www.atlasform.com
WITH DOUBLE
SHEAR PLATE/PIN
WITH 45 DEGREE
HEAD SHEAR PLATE
PRECAST
& TILT-UP
Length
2 ton
4.38
2 ton
8.38
450
162.0
4 ton
7.50
400
280.0
4 ton
11.88
200
419.0
6 ton
13.25
100
769.0
8 ton
13.25
100
923.0
P-92-H Two-Hole
Erection Anchor
2 ton
4.38
2 ton
8.38
300
208
4 ton
7.50
200
366
4 ton
11.88
200
505
6 ton
13.25
100
875
8 ton
13.25
100
1029
P-92-HP Two-Hole
Erection Anchor with
Shear Plate
P-92-S
P-92-SP
Special Order
Width
4 ton
6.00
400
317
8 ton
6.00
200
554
8-10 ton
7.00
100
1049
8-10 ton
8.00
100
1450
Special Order
Load Range
Width
4 ton
Product
Code No.
6.00
400
349
8 ton
6.00
200
586
8-10 ton
7.00
100
898
8-10 ton
8.00
100
940
P-93
Special Order
Length
1 ton
4.00
2025
30
Load Range
P-93 L-Anchor
www.atlasform.com
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Load Range
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
Load Range
20-FORMING
ACCESSORIES
Load Range
10-FORMING
& SHORING
171
P-94
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
60-PRECAST
& TILT-UP
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
P-95-F
Load Range
Length
2 ton
4.25
1500
63.0
2 ton
5.75
800
83.0
4 ton
4.25
700
135.0
4 ton
4.75
550
148.0
4 ton
5.25
500
161.0
4 ton
5.75
425
175.0
4 ton
6.25
400
188.0
4 ton
6.75
375
201.0
4 ton
7.25
325
215.0
4 ton
7.75
300
228.0
4 ton
8.25
275
241.0
4 ton
8.75
250
254.0
4 ton
9.25
225
268.0
4 ton
9.75
200
281.0
4 ton
10.25
175
294.0
4 ton
10.75
150
309.0
4 ton
11.25
150
321.0
6 ton
11.50
175
486.0
8 ton
6.25
250
321.0
8 ton
11.50
175
576.0
P-95-P
Load Range
Length
2 ton
2 ton
3 ton
3.75
8 ton
6.25
Pieces per
drum
2.75
2000
50
3.38
1500
58
1050
92
PRODUCTS
70- FOUNDATION
Special Order
Length
Pieces per
drum
2 ton
2.25
1600
71
4 ton
3.00
500
142
4 ton
3.50
500
155
4 ton
4.38
500
196
8 ton
6.88
250
436
Load Range
172
www.atlasform.com
PRECAST
& TILT-UP
P-96
Special Order
Load Range
Length
2 ton
4.00
1200
42
2 ton
2.75
1200
27
4 ton
5.50
1125
123
8 ton
7.00
400
331
P-97-DT
30-ATLAS TECH
PRODUCTS
Special Order
Load Range
Length
4 ton
8 ton
Pieces per
drum
16.50 to 23.50
100
300
22.25 to 32.25
60
700
Special Order
Load Range
Length
Pieces per
drum
2 ton
14.75
450
98
4 ton
14.75
400
107
8 ton
14.75
400
123
P-98-T
Special Order
Load Range
Overall Length
Product
Code No.
2 ton
#3
36
112.6
4 ton
#4
48
267.0
8 ton
#6
72
901.1
2 ton
#3
33
103.2
4 ton
#4
42
233.6
8 ton
#6
66
826.0
2 ton
#3
30
93.8
4 ton
#4
36
200.2
8 ton
#6
54
675.8
PRODUCTS
1500 PSI
2000 PSI
P-98-T Tension
Reinforcement
3000 PSI
www.atlasform.com
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
P-98-S
40-BAR
SUPPORTS
20-FORMING
ACCESSORIES
Pieces per
drum
10-FORMING
& SHORING
173
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
P-99
P-99-N
P-99-C
Contractor Committed.
Special Order
Type
Product Description
Load Range
Length
P-99-N
Narrow Recess
1 ton
Product
Code No.
Pieces per
box
50
23.0
P-99
Plastic Recess
2-3 ton
50
22.0
P-99
Plastic Recess
4-6 ton
5-1/4
50
60.0
P-99
Plastic Recess
8-10 ton
7-1/2
25
155.0
30-ATLAS TECH
PRODUCTS
Special Order
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
P-100
Type
Product Description
Load Range
Length
Product
Code No.
Pieces per
box
P-99-C
Cast Recess
2 ton
50
72.0
P-99-C
Cast Recess
4-6 ton
5-1/4
50
122.0
P-99-C
Cast Recess
8 ton
7-1/2
10
350.0
Pieces per
box
P-101
Type
Product Description
Load Range
Length
Product
Code No.
P-100
Holding Plate
2 ton
2-3/4
50
15.0
P-100
Holding Plate
4-6 ton
3-3/8
50
25.0
P-100
Holding Plate
8 ton
4-7/8
25
59.0
Pieces per
box
P-102
Type
Product Description
Load Range
Length
Product
Code No.
P-101
Holding Rod
3/8 Coil
50
25.0
P-101
Holding Rod
1/2 Coil
50
42.0
P-102 Wedge
P-103
P-103 Foam
174
Type
Product Description
Load Range
Product
Code No.
Pieces per
box
P-102
Wedge
2 ton
50
13.0
P-102
Wedge
4-6 ton
50
38.0
P-102
Wedge
8 ton
10
94.0
Pieces per
box
Wt. Lbs.
per 100
Product Description
Load Range
Product
Code No.
P-103
Foam
2 ton
60.10.47002
1000
5.0
P-103
Foam
4-6 ton
60.10.47004
1000
5.0
P-103
Foam
8 ton
60.10.47008
500
20.0
www.atlasform.com
PRECAST
& TILT-UP
T-1
5-1/2
60.21.53055
131.0
60.21.53060
133.0
6-1/2
60.21.53065
135.0
60.21.53070
136.0
7-1/4
7-1/2
60.21.53075
138.0
60.21.53080
139.0
20-FORMING
ACCESSORIES
Dia.
137.0
Slab Thickness
Up to 5-1/2
190.0
1-1/4
192.0
1-1/4
6-1/2
193.0
1-1/4
1-1/4
7-1/2
30-ATLAS TECH
PRODUCTS
Dia.
1-1/4
195.0
60.21.52075
196.0
1-1/4
60.21.52080
198.0
1-1/2
Up to 5-1/2
60.21.51055
207.0
60.21.51060
209.0
1-1/2
6-1/2
60.21.51065
210.0
1-1/2
60.21.51070
211.0
1-1/2
7-1/2
60.21.51075
213.0
1-1/2
60.21.51080
215.0
40-BAR
SUPPORTS
1-1/2
Slab Thickness
300.0
Up to 5-1/2
60.21.63055
60.21.63060
304.0
6-1/2
60.21.63065
306.0
60.21.63070
310.0
7-1/2
60.21.63075
312.0
60.21.63080
316.0
60-PRECAST
& TILT-UP
60.22.60277
1-1/4
60.22.60280
1-1/4
60.22.60287
1-1/4
60.22.60288
1-1/4
60.22.60289
1-1/4
60.22.60297
1-1/4
10
60.22.62100
1-1/4
12
60.22.62120
PRODUCTS
1-1/4
70- FOUNDATION
1-1/4
50-FLATWORK
ACCESSORIES
T-2
10-FORMING
& SHORING
60.22.61055
461.0
1-1/2
60.22.61060
465.0
1-1/2
6-1/2
1-1/2
473.0
1-1/2
7-1/2
477.0
1-1/2
481.0
1-1/2
469.0
www.atlasform.com
175
T-3
T-3-A
Loop Length
Wt. Lbs.
per 100
3/4
263.0
3/4
12
296.0
12
1-1/4
12
60.21.73002
330.0
350.0
T-4
Loop Length
Wt. Lbs.
per 100
3/4
153.0
3/4
12
157.0
12
1-1/4
12
60.21.73001
175.0
185.0
Slab Thickness
3/4
60.22.35040
3/4
4-1/2
60.22.35045
3/4
60.22.35050
3/4
5-1/2
60.22.35055
3/4
60.22.35060
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
Contractor Committed.
Special Order
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
176
www.atlasform.com
PRECAST
& TILT-UP
Dia.
Wt. Lbs.
per 100
3/4
60.22.15030
80.0
T-6-A
Slab Thickness
3/4
60.22.25040
3/4
60.22.25050
3/4
5-1/2
60.22.25055
3/4
60.22.25060
3/4
6-1/2
60.22.25065
60.22.25070
3/4
7-1/4
60.22.25072
3/4
7-1/2
60.22.25075
3/4
60.22.25080
3/4
8-1/4
60.22.25082
3/4
8-1/2
60.22.25085
3/4
8-3/4
60.22.25088
60.22.25090
9-1/4
60.22.25092
3/4
9-1/2
60.22.25095
3/4
10
60.22.25100
3/4
10-1/2
60.22.25105
3/4
11
60.22.25110
3/4
11-1/4
60.22.25112
3/4
11-1/2
60.22.25115
3/4
12
60.22.25120
3/4
15
60.22.25150
3/4
16
60.22.25160
60-PRECAST
& TILT-UP
3/4
50-FLATWORK
ACCESSORIES
3/4
40-BAR
SUPPORTS
3/4
30-ATLAS TECH
PRODUCTS
Dia.
20-FORMING
ACCESSORIES
BRACE ANCHOR
T-5-A
10-FORMING
& SHORING
T-8
LIFTING ANGLE
Bolt Size
Wt. Lbs.
21
60.20.41008
53.0 Ea.
18
PRODUCTS
Length
45.0 Ea.
70- FOUNDATION
www.atlasform.com
177
T-10
T-11
Shear bar
Length
Wt.
Lbs. / Ea.
12
2.17
1-1/4
10
12
2.47
12
2.95
12
12
3.47
15
12
4.0
T-12
Insert Length
Shear bar
Length
Product
Code No.
Wt. Lbs.
per 100
24
302.0
1-1/4
10
24
435.0
24
457.0
12
24
560.0
15
24
664.0
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
Insert Length
Special Order
60-PRECAST
& TILT-UP
PRODUCTS
T-13
70- FOUNDATION
Contractor Committed.
Special Order
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
Bolt Dia.
3/4
60.20.20001
14.0
60.20.20002
14.0
COIL-ANCHORTM
U.S. Patent No. 5,006,023
T-13-L
Dia.
Length
Product Code
No.
Wt. Lbs.
Packaging
3/4
4-1/2
60.25.15150
0.8 Ea.
T-13 Coil-Anchor
3/4
60.25.15060
1.0 Ea.
Extra tangs
3/4
60.25.15000
Special Order
Product Code
No.
178
Wt. Lbs.
Packaging
0.4 Ea.
6 oz. bottle
www.atlasform.com
PRECAST
& TILT-UP
Adjustment
Wt. Lbs.
13 ft. 0 to 20 ft. 6
96.0 Ea.
T-14, B-4
14 ft. 0 to 23 ft. 6
130.0 Ea.
T-14, B-5
22 ft. 6 to 39 ft. 0
208.0 Ea.
T-14, B-6
10 ft. 0 to 14 ft. 0
75.0 Ea.
T-14, B-7
Jumbo Brace
107.0 Ea.
Jumbo Brace
130.0 Ea.
T-14, B-9
172.0 Ea.
T-14, B-10
193.0 Ea.
T-14, B-11
Tru-Itt Brace
25 ft. 5 to 40 ft. 0
505.0 Ea.
T-14, B-12
Jumbo Brace
245.0 Ea.
382.0 Ea.
T-14, B-15
410.0 Ea.
T-14, B-17
32 ft. to 42 ft.
668.0 Ea.
T-14, B-18
42 ft. to 52 ft.
855.0 Ea.
Adjustment
Wt. Lbs.
T-15
21 ft. 6 to 29 ft. 0
71.0 Ea.
T-15
5 ft 0 extension
42.0 Ea.
T-15
10 ft 0 extension
63.0 Ea.
T-15-C
21.0 Ea.
T-20
100.0 Ea.
T-20-C
65.0 Ea.
Size
Wt. Lbs.
55.0 Ea.
T-19
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
T-14, B-14
30-ATLAS TECH
PRODUCTS
T-14, B-8
20-FORMING
ACCESSORIES
T-14, B-2
Type
T-14
T-15
10-FORMING
& SHORING
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
www.atlasform.com
179
T-21
Bolt Dia.
Color
3/4
1
Packaging
Orange
0.2
50 per carton
Red
0.3
50 per carton
1-1/4
Red
0.3
50 per carton
1-1/2
Green
0.4
40 per carton
T-26
Wt. Lbs.
1-1/4
60.20.20011
16.1 Ea.
1-1/2
60.20.20012
16.1 Ea.
8.0 Ea.
1 Bushing
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
T-27
Wt. Lbs.
60.20.41027
23.0 Ea.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
180
www.atlasform.com
PRECAST
& TILT-UP
Wt. Lbs.
per 100
Packaging
60.21.20500
160
20
5-1/4
60.21.20525
5-1/2
60.21.20550
165
20
60.21.20600
170
20
6-1/4
60.21.20625
172.5
20
6-1/2
60.21.20650
175
20
6-3/4
60.21.20675
60.21.20700
180
20
7-1/4
60.21.20725
182.5
20
7-1/2
60.21.20750
185
20
190
20
253
10
60.21.20800
60.21.20825
8-1/2
60.21.20850
8-3/4
60.21.20875
60.21.20900
256
10
9-1/4
60.21.20925
258
10
9-1/2
60.21.20950
259
10
10
60.21.21000
262
10
10-1/2
60.21.21050
265
10
60.21.21100
302
10
60.21.21150
304
10
12
60.21.21200
306
10
15
60.21.21500
24
60.21.22400
50-FLATWORK
ACCESSORIES
11
11-1/2
40-BAR
SUPPORTS
8
8-1/4
Plastic Base
Product Code No.
30-ATLAS TECH
PRODUCTS
Wire Base
Product Code No.
20-FORMING
ACCESSORIES
Structural Panel
Thickness
T-41
T-41-S
T-43-R
Wt. Lbs.
60.20.10100
9.7 Ea.
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
10-FORMING
& SHORING
www.atlasform.com
181
T-45
Wt. Lbs.
Packaging
20 per bag
T-46
Wt. Lbs.
Packaging
20 per bag
Wt. Lbs.
38.0 Ea.
T-49
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
60-PRECAST
& TILT-UP
PRODUCTS
70- FOUNDATION
Contractor Committed.
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
T-49-E
Packaging
160.0
20
5-1/2
165.0
20
170.0
20
6-1/4
172.5
20
6-1/2
175.0
20
180.0
20
7-1/4
182.5
20
7-1/2
185.0
20
190.0
20
8-1/2
253.0
20
256.0
20
9-1/4
257.5
20
9-1/2
259.0
20
10
262.0
20
10-1/2
265.0
20
11
248.0
20
11-1/2
271.0
20
12
224.0
20
182
Wt. Lbs.
per 100
www.atlasform.com
PRECAST
& TILT-UP
T-50
Special Order
Product Code No.
Wt. Lbs.
13.0
T-51
20-FORMING
ACCESSORIES
T-52
30-ATLAS TECH
PRODUCTS
30
Wt. Lbs.
per 100
175.0
Wt. Lbs.
per 100
Packaging
390.0
10
10
445.0
10
12
560.0
10
40-BAR
SUPPORTS
T-53
Special Order
Product Code No.
Wt. Lbs.
50-FLATWORK
ACCESSORIES
10-FORMING
& SHORING
41.0
T-58
20.27.12075
30.0
PRODUCTS
PLASTIC KEYWAY
T-59
www.atlasform.com
70- FOUNDATION
60-PRECAST
& TILT-UP
183
T-61
5 to 9 panel thickness
30-ATLAS TECH
PRODUCTS
40-BAR
SUPPORTS
Size
1 x 6
60.21.83060
1 x 7
60.21.83007
1 x 9
60.21.83009
1 x 12
60.21.83012
Wt. Lbs.
5.9 Ea.
T-63
T-63-S
ALUMINUM STRONGBACKS
ALUMINUM SPLICE PLATE ASSEMBLY
Special Order
Description
T-66
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
T-62
PRODUCTS
70- FOUNDATION
T-68
Contractor Committed.
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
PRECAST
& TILT-UP
T-75
184
Wt. Lbs.
T-63 10 Channel
118.0 Ea Set
T-63 15 Channel
177.0 Ea Set
T-63 20 Channel
T-63 25 Channel
TILT BRACKET
Type and Size
5 Bracket
60.25.66005
0.19
7 Bracket
60.25.66007
0.22
60.25.66000
0.18
Size Can
# Can/ Box
Wt. Box
60.25.66100
17 oz.
12
20.0
13 oz.
12
16.8
Wt. Lbs.
60.20.45001
33.0 Ea.
www.atlasform.com
PRECAST
& TILT-UP
Type
Product
Code No.
Wt. Lbs.
per 100
Packaging
8
9
Wire Based
60.21.40800
390.0
10
Wire Based
60.21.40900
10
Wire Based
60.21.41000
495.0
10
12
Wire Based
60.21.41200
560.0
10
20-FORMING
ACCESSORIES
Structural Panel
Thickness
10-FORMING
& SHORING
T-81
T-83
30-ATLAS TECH
PRODUCTS
Special Order
Wt. Lbs.
23.2 Ea.
60.21.10500
1.600
5-1/2
60.21.10550
1.650
60.21.10600
1.700
60.21.10625
1.725
6-1/2
60.21.10650
1.750
60.21.10700
1.800
7-1/4
60.21.10725
1.825
7-1/2
60.21.10750
1.850
60.21.10800
1.900
8-1/4
60.21.10825
2.530
8-1/2
60.21.10850
2.560
2.575
9-1/2
60.21.10950
2.590
10
60.21.11000
2.620
10-1/4
60.21.11025
2.650
10-1/2
60.21.11050
11
60.21.11100
2.480
11-1/4
60.21.11125
2.710
11-1/2
60.21.11150
12
60.21.11200
60.21.10900
60.21.10925
PRODUCTS
70- FOUNDATION
9
9-1/4
60-PRECAST
& TILT-UP
6
6-1/4
www.atlasform.com
50-FLATWORK
ACCESSORIES
Panel Thickness
T-110
40-BAR
SUPPORTS
2.240
185
10-FORMING
& SHORING
FOUNDATION
PRODUCTS
Contractor Committed.
VOID FORMS
Sonovoid Slab
Standard Sizes:
width: 6, 8, 9, 10, 12, 14, 16, 18 and 24.
height: 4, 6, 8, 10 and 12.
Custom sizes available upon request.
Standard Strength: Approximately 1600-3000* PSF
ultimate capacity.
Approved for maximum Beam/Wall height of 10 feet
Extra Strength: Approximately 2000-4500* PSF
ultimate capacity.
Approved for maximum Beam/Wall height of 16 feet
* Ultimate capacity depends on product size.
structural concrete slab and underlying expansive soils. The SureVoid material, lying under structural concrete
construction, absorbs ground moisture and loses strength only after the concrete has set, creating space into which
soil can expand without causing damage. SlabVoid is designed to withstand the working load of the concrete
construction process, then deteriorate with the absorption of moisture.
Benefits of SlabVoid Products
Lightweight and easy to install.
Available either factory assembled or knock-down (K.D.) for lower
shipping and storage costs.
Easily cut to shorter lengths for proper fit.
Available in standard strengths and sizes, or can be custom
manufactured to accommodate design and load specifications.
Can be used to displace concrete volume where
reduction in weight or cost is a consideration.
PRODUCTS
WallVoid System products provide temporary support systems for liquid concrete until the concrete sets and
70- FOUNDATION
SlabVoid is a corrugated paper product that helps eliminate severe damage by creating a space between the
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
SonoVoid Beam
can support itself. They are ideal for concrete components that span across drilled piers, pads, intermittent footings,
as well as other concrete work. The WallVoid material, lying under structural concrete construction, absorbs ground
moisture and loses strength only after the concrete has set, creating space into which soil can expand without
causing damage.
Benefits of WallVoid Products
Lightweight and easy to install.
Available either factory assembled or knock-down (KD) for lower shipping and storage costs.
Easily cut to shorter lengths for proper fit.
Available in standard strengths and sizes, or can be custom manufactured to accommodate
design and load specifications.
Placed end-to-end between drilled piers or spread footings.
End caps and seam pads available to prevent concrete from flowing into void.
186
www.atlasform.com
FOUNDATION
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
WINDOW SYSTEMS
30-ATLAS TECH
PRODUCTS
Easy Well
The Boman Kemp Easy-Well (or basement window well) is used to keep earth away
from basement windows. It is designed to bolt directly to the Boman Kemp Easy-Buck
or can be bolted to the wall during basement remodeling.
40-BAR
SUPPORTS
Safety Grate
The safety grate is made of rolled angle iron steel and steel safety bars. It is designed to keep people and pets out of the Easy-Well and hold the weight of standard
foot traffic.
Escape Ladder
50-FLATWORK
ACCESSORIES
Windows
CUSTOM FABRICATION
PRODUCTS
70- FOUNDATION
www.atlasform.com
60-PRECAST
& TILT-UP
The Boman Kemp double insulated vinyl window comes equipped with a sliding sash,
screen, and is lockable from the inside. It is available in white and almond color and is
also can be ordered in both Low E and tempered glass.
187
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
TOOLS &
PLACING
Contractor Committed.
POWER SPRAYER
REAL PUMPTM Power Spraying System
Designed to spray:
Form Oils & Other Release Agents : Concrete Sealers : Curing Compounds
(Including White Wax Cures, High Viscosity & High Solids Products) : Stains
Herbicides : Deck Sealers & Cleaners : Acids (special wand required) : Bleach
Solutions : Fertilizers : Pesticides : Cleaners And Many Other Products
All Steel Construction for Durability
Large Rubber Feet for Stability
Comes Fully Assembled
Multiple Power Options Available Including
115VAC includes standard 9 power cord
230VAC includes standard 9 power cord
12VDC includes standard 25 power cord w/ battery clamps
Complete spray Control Kit Includes
1-spray Control Gun with comfort grip handle and quick connect,
open flow fittings
1-18 Straight Brass Wand Section
1-18 Curved Brass Wand Section
1-Adjustable Brass Fan Nozzle
100 Safety Yellow 3/8 Chemical Resistant Hose with quick connect open flow fittings
Chemical Resistant Diaphragm and Seals in Pump and Reel
Utilizes a circuit breaker instead of fuses, protecting the operator and eliminating the need to search for fuses.
Pressure sensitive switch shuts off pump when you stop spraying, to prevent bursting hoses and product
separation or damage.
This feature can be by-passed with our pressure activated re-circulator to continuously re-circulate and
mix the product you are spraying.
Reduces Labor Costs Portable, Easy to Use and Versatile Reduces Material Cost Easy to Clean Reliable
PRODUCTS
Features
Quick connect fitting- will easily connect to the REAL Pump Power Spraying System
Heavy duty chemical and crush resistant hose available in two colors
High impact, fully adjustable plastic spray tip holder
Large, comfort grip spray control handle with viton seals
Composite fiberglass, telescoping pole- easily adjusts from 8 feet to 24 feet with application spray
heights up to 40 feet when using cone nozzle.
Interchangeable, quick connect spray tips
1 gallon per minute quick connect 1100 fan tip
Adjustable, quick connect cone nozzle- adjusts to create a fine mist or an additional 18 foot spray
pattern for an overall effective distance of over 40 feet.
Telescoping pole can also be converted for use as a scrapper handle
70- FOUNDATION
60-PRECAST
& TILT-UP
The telescoping adjustable height spray lance makes extended height and distance applications easy to
reach up to 40 feet (12.2 meters) when using the cone nozzle provided. Drastically reducing your
application times and improving the safety of your employees. At only 8 lbs. the adjustable lance is light
weight and easy to maneuver. This application lance has been designed with a coil hose on the outside
making it easier to clean or replace when needed. Using a coil type hose has eliminated the extra hose,
normally lying at your feet, that is typically associated with telescoping spray lances.
188
www.atlasform.com
TOOLS &
PLACING
20-FORMING
ACCESSORIES
Use to spray-apply Atlas Tech form releases, curing compounds, sealers and bondbreakers.
3.0 gallon solid brass pump barrel, shut-off, 18 extension, and 1/2 gallon per minute brass
fan tip nozzle.
4.5 open head tank for easy filling and cleaning. TRI-POXY coated steel makes tank
corrosion resistant and easy to clean.
Lightweight for easy use.
Comes with a comfortable carrying strap.
TANK
HOSE
PUMP
EXTENSION
STRAP
SHIP UNIT/
WGT
PRODUCT
CODE NO.
3.0 G / 11.3L
TRI POXY
42 / 1.06m
12/ 300 mm
Brass
18 / 455 mm
Brass
Yes
1-10.16 lbs
4.60 kg
80.20.10035
30-ATLAS TECH
PRODUCTS
CAPACITY
10-FORMING
& SHORING
CONSTRUCTION EQUIPMENT
SPRAY NOZZLES
40-BAR
SUPPORTS
Atlas offers a wide array of spray nozzles to help contractors get the most out of each Atlas Tech Product. Most
standard construction sprayers come with 0.5 gallon per minute fan spray tip, usually identified as a #8005 tip.
This number identifies two characteristics of the tip:
1) #8005 - the degree angle of the tip (80 degrees)
2) #8005 - the flow rate (0.5 gallon/minute)
Type
Product Code No.
80.20.22102
80.22.22103
80.22.22105
80.22.22110
80.22.22000
ELEPHANT TRUNKS
Diameter
Packaging
80.12.50600
100 roll
80.12.50800
100 roll
12
80.12.51200
50 roll
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
#8002- bondbreakers
#8003 - bondbreakers, low viscosity cures
PRODUCTS
www.atlasform.com
189
70- FOUNDATION
MULTIQUIP CONSTRUCTION
EQUIPMENT
CAMLEVER
CONCRETE
BUCKETS
Contractor Committed.
GROUT PUMP
ChemGrout CG-502
The ChemGrout Sprayer/Finisher Series is specially
designed to offer the flexibility for both pump and
spray applications. Its twin 45-gallon mixing tanks,
pump and large holding hopper are all mounted on
a single skid for quick, easy set-up and immediate
operation. The low profile mix tanks enable greater
ease when dispensing bags of dry material, reducing
operator fatigue and increasing productivity. The tanks
feature high-efficiency paddles that provide a rapid
mixing cycle and ensure a smooth, consistent
material mix. Each mix tank alternates feeding a
centrally located holding hopper allowing for a
continuous, non-stop process.
Electric Hydraulic
Required
1 phase
Weight
1000 lbs
Size
82 L x 31 W x 55 H
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
TOOLS &
PLACING
190
www.atlasform.com
TOOLS &
PLACING
MOTORS
Weight
HP
Volts
Amps
VME1500
12 lbs.
1.5
115 AC/DC
11
1-3/4
80.15.11110
VME2500
15.5 lbs.
2.5
115 AC/DC
13
2-1/2
80.15.11120
VME3000
19 lbs.
3.0
115 AC/DC
19
2-1/2
80.15.11130
CORES
Model
20-FORMING
ACCESSORIES
Model
CASINGS
Product
Code No.
Model
Length
Product
Code No.
3
5
80.15.12010
80.15.13010
80.15.12020
80.15.13020
VBC7
80.15.12030
VBCS7
80.15.13030
VBC10
10
VBC14
14
80.15.12040
VBCS10
10
80.15.13040
80.15.12050
VBCS14
14
80.15.13050
VBC21
21
80.15.12060
VBCS21
21
80.15.13060
HEADS
30-ATLAS TECH
PRODUCTS
Length
Radius of
Effect
Product
Code No.
Size
Model
Product
Code No.
1-1/16 Steel
VBH1116
4-5
80.15.14310
1-1/16
VBRT1116
80.15.14110
1-5/16 Steel
VBH1516
5-7
1-5/16
VBRT1516
80.15.14120
1-9/16 Steel
VBH1916
10-13
1-3/4 Steel
VBH134
15-17
1-9/16
VBRT1916
80.15.14130
80.15.14340
1-3/4
VBRT134
80.15.14140
2-1/8 Steel
VBH218
17-21
80.15.14350
2-1/8
VBRT218
80.15.14150
2-1/2 Steel
VBH212
21-24
80.15.14360
2-1/2
VBRT212
80.15.14160
50-FLATWORK
ACCESSORIES
Model
40-BAR
SUPPORTS
Size
60-PRECAST
& TILT-UP
www.atlasform.com
2-1/8
Produces
1130 to 1455
lbs. of
force
11,000 to
12,500 rpm
vibrating
frequencies.
All-around
size capable
of handling stiff,
low-slump
concrete.
13 long.
2-1/2
Produces
1530 to 2200
lbs. of
force 10,000 to
12,000 rpm
vibrating
frequencies.
Ample force
for stiffest,
low-slump
concrete.
13 long.
1-3/4
Produces
935 to 1130
lbs. of
force
12,000 to
13,200 rpm
vibrating
frequencies.
Good
general
purpose
head size,
12 long.
PRODUCTS
1-5/16
Produces
440 to 535
lbs. of
force
12,000 to
13,200 rpm
vibrating
frequencies.
Excellent for
thin prestress
sections.
14 long.
1-9/16
Produces
730 to 880
lbs. of
force
12,000 to
13,200 rpm
vibrating
frequencies.
For thin wall
sections or
general
purpose
vibrating.
12 long.
70- FOUNDATION
1-1/16
Produces
150 to 180
lbs. of
force 12,000 to
13,200 rpm
vibrating
frequencies.
Ideal for
thinnest
prestress
sections.
11 long.
10-FORMING
& SHORING
CONCRETE VIBRATORS
191
30-ATLAS TECH
PRODUCTS
Description
Screed Mag 6
80.40.11060
80.40.11080
80.40.11100
80.40.11120
80.40.11140
80.40.11160
Screed Mag 20
80.40.11200
ROUND FRESNO
Description
5 x 36
80.40.27130
5 x 48
80.40.27145
40-BAR
SUPPORTS
50-FLATWORK
ACCESSORIES
SQUARE FRESNO
Description
5 x 24
80.40.27115
5 x 36
80.40.27125
5 x 48
80.40.27150
60-PRECAST
& TILT-UP
POOL TROWELS
Description
5 x 14
80.40.42430
5 x 20
80.40.41753
PRODUCTS
CONCRETE TROWELS
Description
12 x 4
80.40.41330
16 x 4
80.40.41530
18 x 4
80.40.41630
70- FOUNDATION
Contractor Committed.
CONCRETE TOOLS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
TOOLS &
PLACING
192
www.atlasform.com
TOOLS &
PLACING
CONCRETE TAMPERS
Product Code No.
36
80.40.13010
48
80.40.13020
20-FORMING
ACCESSORIES
Description
DIRT/STAMP TAMPERS
Description
12 x12
35.50.95020
16 x 16
35.50.95030
30-ATLAS TECH
PRODUCTS
10 x 10
FLOOR SCRAPERS
Description
10-FORMING
& SHORING
CONCRETE TOOLS
5 x 18
80.48.31400
5 x 22
80.48.31500
40-BAR
SUPPORTS
5 x 14
OVERLAY SQUEEGEES
Handle
24 Neoprene
6 Standard
30 Serated Edge
6 Standard
80.48.11030
36 Neoprene
6 Standard
80.48.11036
50-FLATWORK
ACCESSORIES
Description
NAILS
Description
60-PRECAST
& TILT-UP
80.50.12120
16 Duplex
80.50.12130
6 Common
80.50.11110
PRODUCTS
80.50.12110
8 Duplex
TAPE
Product Code No.
Duct Tape
80.75.12100
80.7512120
Packaging Tape
80.75.13200
Description
www.atlasform.com
70- FOUNDATION
6 Duplex
193
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Contractor Committed.
Page No.
A-100 Bracket.....................................................25
A-Clamp..............................................................21
A-Deck...........................................................11-14
ACS Wallform................................................26-27
ADA Detectable Warning Panels......................159
Abrasive Blades & Blocks.....................................2
Adhesive Spray.................................................184
Adjustable Coil Bolt .........................................61
Adjustable Kicker..............................................143
Adjustable Weld Angle Bracket ........................71
Aggregates............................................................2
Alisply..................................................................28
AL-SPEED Shoring Frame..........................8 - 10
Aluminum Beam......................................8 - 10, 21
Aluminum Grits (non-slip).................................155
Aluminum Strongbacks.......................................21
Aluminum Wall Forms.............................20-25, 30
Anchor Bolts.......................................................67
Anchor Bolt Sleeves .........................................67
Anchoring Epoxy........................................105,126
Angle Bracket................................................21,23
Area Wells........................................................187
Arcis Detectable Warning Panels.....................159
Atlas Tech Products.....................................86-125
Backer Rod...........................................................2
Bag Ties............................................................134
Bar Chairs/ Supports.................................130-133
Bar, Stripping.......................................................49
Barlock Couplers...............................................137
Barrier Dowel Aligner .......................................139
Barrier Fencing.....................................................2
Base Tie ..........................................................50
Basket Clip........................................................140
Basket, Dowel...................................................138
Batter Washer................................................65,71
Beam Bolster.....................................................131
Beam Clip ..........................................................85
Beam Form Systems.....................................18-19
Bearing Pads........................................................2
Bearing Plate......................................................45
Bentonite Waterstop.........................................158
Better Bar............................................................49
Blankets, Curing................................................154
Blind Side Walls.............................................30,44
Bolsters.....................................................130-131
Bolts...............................................................67,71
Bolt Clamp..........................................................67
Bondbreakers................................................96-97
Bonding Agents.........................................100-107
Bottom Jacks........................................................9
Box Culvert Form System...................................31
Box Voids..........................................................186
Brace Anchor....................................................177
Brace Anchor for Fill .......................................176
Braces, Tilt-Up..................................................179
Breakback Wrench .........................................49
Bridge Deck Repair Products....................108-110
Bridge Overhang Bracket..............................38-39
Bulkhead Bracket...........................................21,23
Bulkhead Form...................................................44
Bullfloats...........................................................192
Burlap...............................................................154
Burlene.............................................................154
Cap Plug ..........................................................78
Capitol Forms.....................................................33
194
Item
Page No.
DBR Coupler......................................................134
DBR Setting Splice Bars....................................134
Deck Forms......................................................8-19
Decorative Concrete Systems..................128-129
Delta Tie Sandwich Panel..................................160
Diamond Blades....................................................2
Dobies................................................................133
DOT Curing Compounds........................90-91, 127
DOT Patch..........................................110, 115-116
Double Chamfer Strip........................................183
Double Flared Coil Loop Insert .........................62
Double Flared Criss Cross Coil Loop Insert........64
Double Flared Loop Insert...................................79
Double Pickup Inserts........................................175
Double Swivel Lifting Plate................................180
Double Tee Specialty Anchor.............................173
www.atlasform.com
Item
Page No.
Item
Page No.
Item
Page No.
www.atlasform.com
195
Panel Pads........................................................167
Paper Tubing.....................................................148
Parking Structure Form Systems...................18-19
Patching Products......................................113-126
Pencil Rod...........................................................69
Pipe Brace.........................................................179
Pipe Turning Device..........................................167
Plastic Cap for Expansion Joint........................146
Plastic Cones for Coil Ties..................................63
PRODUCTS
Jahn A Bracket.................................................55
Jahn C Bracket.................................................55
Jahn Cornerlock..................................................55
Jahn Eccentric.....................................................56
Jahn Rivet...........................................................56
Omni Wedge.......................................................47
On-Site Pipe Bace.............................................179
One-Sided Wall Forms...................................30,44
OSHA Regulations.............................................4-5
Overhang Bracket..........................................38-39
Overlays (Decorative)................................128-129
Overlays (Structural)....................109-110, 114-117
Radius Formers..................................................41
Radius Wall Forms........................................28-29
Rail Fastener Embed (RT-SAE).........................81
Rebar................................................................141
Rebar Clip and Form Spreader...........................71
Rebar Couplers........................................135, 137
Rebar Cutters & Benders.................................189
Rebar Guards, Plastic......................................140
Rebar Supports.........................................130-133
Recess Members..............................................174
Recess Plugs (Fleet Lift)..................................174
Recess Plugs (Swift Lift)...........................163-164
Reinforcing Bar for Swift Lift Anchors...............164
Removable Plastic Cap Strips..........................146
Repair Mortars...........................................113-122
Reshore Products...................................36, 38, 56
Retarders............................................................99
Ring Clutches...................................................170
Riser Frames....................................................148
Rock Anchor (Coil Thread).................................64
Rocket/Kohler Ferrule Insert...............................80
Rod Clamp..........................................................69
Rod Clamp (Superior).........................................70
Rollerback Carriage............................................25
Round Column Forms...................................33-34
Round Stakes...................................................144
70- FOUNDATION
Nails..................................................................193
Non-Shrink Grouts......................................111-112
Non-Slip Finish..................................................155
Nut Washer (Acme).............................................68
Quantum-Cure....................................................89
Quick Release Strongback Bolt........................184
Quick Release Strongback Insert.....................184
60-PRECAST
& TILT-UP
Magna Jaw..........................................................73
Median Barrier Forms...........................................2
Mesh Supports...........................................130-133
Methacrylate......................................................110
Mike Bracket........................................................44
Mixers........................................................189-190
Modular Form Systems............................26-28, 31
Moisture Barrier..........................................153-154
Moisture Retaining Cover..................................154
50-FLATWORK
ACCESSORIES
L Anchor..........................................................171
L Leg Inserts.....................................................80
Laminated Veneer Lumber (LVL)........................40
Lead Plugs..........................................................45
Lift Plate (Drilled)...............................................184
Lifting Anchors...................................................162
Lifting Angle.......................................................177
Lifting Eyes........................................................161
Lifting Lug...........................................................21
Lined Tube.....................................................33-34
Liquid Bonding Agents...............................100-101
Load Key...........................................................147
Load Transfer Joint System..............................155
Loop Ferrule Insert..............................................78
Loop Strongback Tie...........................................55
LoopTies..............................................................51
LVL Beams.................................................8-13, 40
40-BAR
SUPPORTS
Keyway...............................................................183
Korolath Bearing Strips.....................................168
Korolath Core Plugs..........................................169
Korolath Heavy Duty Shimpaks........................168
Korolath Horseshoe Spacer Strips....................169
Korolath Shim Strips.........................................168
30-ATLAS TECH
PRODUCTS
Page No.
20-FORMING
ACCESSORIES
Floor Scrapers...................................................193
Floor Underlayments..........................118-119, 127
Flying Deck Forms...................................14, 16-17
Foam (for use with Recess Member)................174
Footing Ties..........................................................2
Form Board.......................................................143
Form Clamp........................................................70
Form Panels..................................................31, 40
Form Patch and Magnetic Setting Tool...............85
Form Release Agents....................................87-88
Form Spacers...................................................132
Form Spreaders..................................................49
Form Systems................................................8 - 35
Form Tie System......................................21, 23,45
Formliners......................................................42-43
Frame Connector...................................................9
Fresnos.............................................................192
Item
10-FORMING
& SHORING
PRODUCTS
70- FOUNDATION
60-PRECAST
& TILT-UP
50-FLATWORK
ACCESSORIES
40-BAR
SUPPORTS
30-ATLAS TECH
PRODUCTS
20-FORMING
ACCESSORIES
10-FORMING
& SHORING
Contractor Committed.
Page No.
Safety Notes......................................................6-7
Safety Rail Post..................................................37
Sand.....................................................................2
Sand Plate........................................................132
Sandwich Panel Erection Anchor......................171
Scaffold Bracket (Jack).................................38, 56
Scissor Clamps...................................................35
Screed Bracket..................................................146
Screed Key........................................................147
Screed Pad.......................................................146
Screed Post......................................................146
Screeds (Magnesium).......................................192
Screeds (Vibrating)...........................................189
Screw Anchor......................................................75
Screw Anchor Bolt Setting Template...................75
Screw Anchor Bolts .........................................75
Screw Anchor Eye Bolts.....................................75
Screw Anchor Setting Bolt..................................75
Screwjacks.......................................................8 - 9
Sealants, Urethane............................................107
Sealers...................................................92-95, 127
Self-Leveling Topping.................................116-117
Self-Leveling Underlayment.......................118,127
Set-EEZ Lubricant.............................................178
Shake-On Floor Hardeners................124-125, 127
She Bolt ......................................................45,72
She Bolt (Outside Stud Rod)...............................68
Shear Bar..........................................................173
Shear Bar For Swift Lift Anchors ......................164
Shelf Angle Insert................................................76
Shim Packs.......................................................168
Shoring Systems..............................................8-19
Shotcrete..............................................................2
Shoulder Eye Bolt
.........................................79
Silane / Siloxane Sealers..................................127
Silica Sand............................................................2
Single Flared Coil Loop Insert.............................62
Single Pickup Insert..........................................175
SL Anchors........................................................162
SL Attachment Nut............................................167
SL Attachment Stud with Wing Nuts.................165
SL Countersunk Screw.....................................165
SL Eye Anchor..................................................162
SL Lifting Eyes..................................................161
SL Plus Coil Wing-Nut......................................166
SL Recess Plugs ..............................................163
SL Rubber Ring For Steel Recess Plug............164
SL Safety Pin with Washer................................166
SL Setting Plate with Countersunk Screw.........165
SL Steel Recess Plug.......................................164
SL Stud.............................................................165
SL Tapped Plate................................................166
SL Throw-Away Recess Plug...........................163
SL Universal Lifting Eyes..................................161
SL Wing Nut......................................................166
Slab Bolsters..............................................130-133
Slab Grabbers.....................................................37
Smooth Dowels.................................................139
Snap Tie Shank Wrench.....................................49
Snap Ties............................................................46
Snap Tie Wedges................................................47
Soil Stabilization Products.....................................2
Sonotube.............................................................34
Space Wheels...................................................132
196
Item
Page No.
www.atlasform.com
Item
Page No.
Tie Plate.......................................................21, 23
Tie Wire............................................................133
Tightening Wrench..............................................70
Tilt Bracket (Edge Form) ..................................184
Tilt-Up Accessories....................................175-185
Tilt-Up Braces....................................................179
Tip To Tip Tie.......................................................47
Toggle Pins............................................................9
Top Jacks..............................................................9
Toggle Coil Ties...................................................64
Tower Chairs.....................................................132
Trench Drains.............................................150-152
Triple Flared Coil Loop........................................65
Trowels..............................................................192
Trowels, Power..................................................189
Truss & Joist Tables.............................................16
Truncated Domes..............................................159
Tube Forms....................................................33-34
Turnbuckle Form Aligner......................................49
Two-Hole Anchor................................................171
Type L Inserts......................................................83
Type B-4 Cushion-Lock Reglet............................84
Underlayments............................................118,127
Urethane Coatings.............................................127
Utility Anchors...................................................167
Vapor Retarders.........................................153-154
Vibrators............................................................191
Vibratory Screeds..............................................189
Visqueen....................................................153-154
Void Forms.................................................149,186
Wale Bolt Assembly.............................................61
Wale Holder.........................................................62
Waler Jack...........................................................38
Waler Tie.............................................................52
Wall Clamps.......................................21, 23, 26-27
Wall Forms.....................................................20-31
Wall Plug.............................................................78
Washer Plates.....................................................58
Water Plug.........................................................122
Water Repellents..............................................127
Waterproof Coating...........................................123
Waterstops.................................................156-158
Wedge (for use with Recess Member)..............174
Wedge Anchors.....................................................2
Wedge Bolt..........................................................52
Welded Wire Fabric...........................................142
Welding Coil Tie..................................................58
Wheels (Plastic Form Spacers).........................132
Window Systems...............................................187
Wing Nut (Coil Thread)........................................65
Wing Nut (Threaded Bar)..............................45, 59
Wire Mesh.........................................................142
Wood Chamfer.....................................................41
Wrench Head Snap Tie Socket...........................50
X FlatTie..............................................................48
YokeBracket........................................................23
Z Tie Holder.........................................................52
Zip Strip Joint Former........................................146