Вы находитесь на странице: 1из 2

NEW

THE NEW AMIAD ELECTRIC


FERTILIZER INJECTOR (EFI)
Accuracy and versatility for a
wide range of fertigation needs
The new Electric Fertilizer Injector (EFI) is an
example of the clean technology products
Amiad has to offer. By delivering liquid
fertilizer with outstanding accuracy in a wide
range of fertigation systems, EFI minimizes
fertilizer waste and protects the environment.
Whether it's on a "green" system powered
by solar panels and 12V DC current or a
conventional irrigation setup run through an
AC controller, EFI operates within 2 to 5% of
its target rates - impressive accuracy that
protects the bottom line and the ecosystem.

In the last 40 years Amiad Filtration Systems have provided water delivery solutions in 70 countries through
8 subsidiaries and sales offices around the world. For more than 30 years, Amiad has been a leading producer
of efficient, hydraulic fertilizer injectors for use in irrigation applications. Benefiting from long experience with
5 types of hydraulic fertilizer injectors, Amiad introduces the ALL NEW Electric Fertilizer Injector (EFI).
Combining an innovative integrated computer and a reliable diaphragm pump, the system represents a
breakthrough in accurate, versatile fertigation technology.

When injecting into an irrigation line that is


pressurized to a variable pressure between

and provides environmental protection if a main

14.5 PSI and 70 PSI, the dose accuracy is +/- 5%

irrigation computer or water meter fails.

When injecting into an irrigation line that is

It operates on 110/220V AC or 12V DC.

pressurized to a constant pressure between

The durable, weather and chemical resistant

14.5 PSI and 80 PSI, the dose accuracy is +/-2%

EFT is accurate at line flow rates ranging from

construction ensures long field life.

0.22 to 1.1 GPM (50-250 l/h)

The integrated computer allows stand-alone mode,

EFI is designed and manufactured according to


UL and CE Standards.

Easy Operation
Easy to calibrate and set in gallons or liters, the Amiad EFI operates at line pressure of up to 80 psi
(5.5 bar). EFI can operate in stand-alone mode, linked to a main irrigation computer to deliver pre-set rates,
or controlled by a water meter to adjust injection based on actual flows in the line.
Integrated Computer
EFIs integrated computer ensures performance and protection as follows:

Automatically releases air in the system.

Prevents over-dosing in case of irrigation controller failure.

Shuts down fertigation if pumps are overloaded or injection line is blocked.

The system also sets off alarms if air is detected, if pumps are blocked or disconnected, or if the current is
low or the system is overloaded. A built-in data logger captures and retains application records while
safeguarding rates.
Maximum Flow Rates
Pressure in irrigation line
(Bar and PSI)

Max EFI Flow Rate


(LPH)

Max EFI Flow Rate


(GPM)

0 Bar - 0 PSI

270

1.19

1 Bar 14.50 PSI

260

1.14

2 Bar 29.00 PSI

248

1.09

3 Bar 43.51 PSI

237

1.04

4 Bar 58.01 PSI

227

1.00

5 Bar 72.51 PSI

217

0.96

6 Bar 87.02 PSI

206

0.91

95-044-880-000/01.08

Weather Resistant Case

Integrated Computer and Diaphragm Pump

AMIAD FILTRATION SYSTEMS


Tel: 1-805-988-3323

2220 Celsius Avenue

Fax: 1-805-988-3313

Oxnard, California

E-mail:info@amiadusa.com

93030 USA

www.amiadusa.com

Вам также может понравиться