Академический Документы
Профессиональный Документы
Культура Документы
SEPREMIUM 2
Oil /water separator
08/11
GENERAL OPERATION
The SEPREMIUM range of oil/water separators separate oil from condensate, generated by compressed
air systems. The SEPREMIUM achieves separation of oil from condensate by means of directing the
condensate through various separation stages.
As condensate flows in to the SEPREMIUM, the oil is filtered out through various filtration elements.
The elements are designed to combine various types of adsorption technologies to achieve less than 10
ppm oil residue values at the output stage.
Final separation stage includes specially selected activated carbon to polish out the remaining
contaminants.
SAFETY INSTRUCTIONS
SAFETY AND PROPER USAGE
To ensure safe and enduring performance of this product, you must comply strictly with the
instructions enclosed herein. Non-compliance with instructions or improper handling of the
product will void your warranty! Usage of this product in conditions not specified in this manual
or in contrary to the instructions hereby provided is considered IMPROPER. The manufacturer
will not be held liable for any damages resulting from improper use of the product.
Inlet nipple
SEPREMIUM 2
housing
Outlet nipple
Wall mounting
bracket back
Washer (2*)
Bolt (2*)
Wall mounting
bracket front
INSTALLATION INSTRUCTIONS
1. Unpack the unit and visually inspect for any
transport damage incurred after leaving our
factory.
IMPORTANT NOTICE
Before installing this product, make sure it
complies with your request and that it suits
your application!
INSTALLATION INSTRUCTIONS
5. Mount the wall mounting bracket back against 6. After placing the wall mounting bracket
back on the wall you can replace the wall
the wall. Make sure the bracket is level.
mounting bracket front plate and screws using
a 5mm wrench.
TECHNICAL SPECIFICATIONS
Max. oil adsorption elements
Inlet connection
Outlet connection
Housing material
Housing colour
Lid colour
Mineral lubricants
Synthetic lubricants
Stabile condensate emulsions
Polyglycol
Max. compressor capacity
ABS
Black
Grey
Yes
Yes
Yes
Yes (consult factory)
2 m/min (based on a 8h. shift)
20 PPM = OK
DIMENSIONS (MM)
230
212
255