Академический Документы
Профессиональный Документы
Культура Документы
An International Standard is the result of an agreement between the member bodies of ISO. A first important step
towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO
technical committee. When consensus has been reached within the technical committee, the document is sent to the
Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 %
of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International
Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 January to 31 January 2011
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 6
ISO/CD 87912
Paper and board Determination of roughness/smoothness (air leak methods) Part 2: Bendtsen
method
TC 17
Steel
ISO/CD 5001
TC 22
Road vehicles
ISO/CD 66214
ISO/CD 66222
Internal combustion engines Piston rings Part 2: Rectangular rings made of steel
ISO/CD 66262
Internal combustion engines Piston rings Part 2: Coil-spring-loaded oil control rings of narrow
width made of cast iron
ISO/CD
16750-3
Road vehicles Environmental conditions and testing for electrical and electronic equipment Part
3: Mechanical loads
ISO/CD
20653
TC 23
ISO/CD
11783-1
Tractors and machinery for agriculture and forestry Serial control and communications data
network Part 1: General standard for mobile data communication
ISO/CD
11783-3
Tractors and machinery for agriculture and forestry Serial control and communications data
network Part 3: Data link layer
TC 24
ISO/CD
20998-2
Measurement and characterization of particles by acoustic methods Part 2: Guidelines for linear
theory
TC 38
Textiles
ISO/DTR
11827
TC 45
ISO/CD
16301
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic-jack
applications Specification
ISO
4656:2007/C
D Amd 1
Rubber compounding ingredients Carbon black Determination of oil absorption number (OAN)
and oil absorption number of compressed sample (COAN) Amendment 1
TC 46
ISO/CD TR
17068
Information and documentation Records Management The Trusted Third Party Repository for
Electronic Records
TC 58
Gas cylinders
ISO/CD
12209
Gas cylinders Outlet connections for gas cylinder valves for compressed breathable air
TC 61
Plastics
ISO/CD
16620
Plastics Determination of the biomass carbon ratio in plastic products and their components
ISO/CD
16525-1
Adhesives Test methods for isotropically electrically conducting adhesives Part 1: General test
methods
ISO/CD
16525-2
Adhesives Test methods for isotropically electrically conducting adhesives Part 2: Electrical
characteristics
ISO/CD
16525-3
Adhesives Test methods for isotropically electrically conducting adhesives Part 3: Heat transfer
properties
TC 67
ISO/CD
13628-7
Petroleum and natural gas industries Design and operation of subsea production systems Part
7: Completion/workover riser systems
TC 70
ISO/CD 454815
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 15: Vibration
fatigue test with composite materials
TC 85
ISO/CD
11665-9
ISO/CD
18589-7
TC 92
Fire safety
ISO/CD
19701
ISO/DTR
Guidance on containment systems for the prevention of pollution arising from uncontrolled fire
26368
water run-of
TC 98
ISO/CD
13033
TC 106
Dentistry
ISO/CD 6873
TC 108
ISO/CD
16063-16
Methods for the calibration of vibration and shock transducers Part 16: Calibration by Earth's
gravitation
TC 123
Plain bearings
ISO/CD 35483
Plain bearings Thin-walled half bearings with or without flange Part 3: Measurement of
peripheral length
TC 130
Graphic technology
ISO/CD
15339-1
TC 131
ISO/DTS
15640
Hydraulic fluid power contamination control General principles and guidelines for selection and
application of hydraulic filters
TC 138
ISO/CD
16486-1
Plastics piping systems for the supply of gaseous fuels - Polyamide (PA) piping systems with fusion
jointing and mechanical jointing Part 1: General
ISO/CD
16486-2
Plastics piping systems for the supply of gaseous fuels - Polyamide (PA) piping systems with fusion
jointing and mechanical jointing Part 2: Pipes
ISO/CD
16486-3
Plastics piping systems for the supply of gaseous fuels - Polyamide (PA) piping systems with fusion
jointing and mechanical jointing Part 3: Fittings
ISO/CD
16486-5
Plastics piping systems for the supply of gaseous fuels - Polyamide (PA) piping systems with fusion
jointing and mechanical jointing Part 5: Fitness for purpose of the system
ISO/CD
16486-6
Plastics piping systems for the supply of gaseous fuels - Polyamide (PA) piping systems with fusion
jointing and mechanical jointing Part 6: Code of practice for design, handling and installation
TC 147
Water quality
ISO/CD
13163-1
Water quality Measurement of lead 210 activity concentration Part 1: Liquid scintillation
counting method
ISO/CD
15923
Water quality Determination of ammonium, chloride, nitrate, nitrite, orthophosphate, silicate and
sulfate by a discrete analysis system and spectrophotometric detection
ISO/DTS
12869
TC 172
ISO/CD 86007
Endoscopes Medical endoscopes and endotherapy devices Part 7: Basic requirements for
medical endoscopes of water-resistant type
TC 190
Soil quality
ISO/CD
28258
ISO/CD
16727
Soil quality Determination of mercury in aqua regia and nitric acid digests Cold vapour atomic
fluorescence spectrometry (CVAFS)
ISO/CD
16729
ISO/CD
16965
Soil quality Determination of trace elements using inductively coupled plasma mass spectrometry
(ICP-MS)
ISO/CD
17073
Soil quality Determination of trace elements in aqua regia and nitric acid digests Graphite
furnace atomic absorption spectrometry method (GFAAS)
TC 201
ISO/CD
13424
Surface chemical analysis X-ray photoelectron spectroscopy Reporting of results for thin film
analysis
TC 204
ISO/DTS
24533
Intelligent transport systems - Data dictionary and message set to facilitate the movement of freight
and its intermodal transfer - road transport information exchanges for supply chain freight timesensitive delivery (Road-Air Freight-Road)
TC 206
Fine ceramics
ISO/CD
13383-1
ISO/CD
13383-2
ISO/CD
14603
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for open hole
tension of continuous fiber-reinforced ceramic matrix composites at room temperature
ISO/CD
22197-4
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification
performance of semiconducting photocatalytic materials Part 4: Removal of formaldehyde
ISO/CD
22197-5
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification
performance of semiconducting photocatalytic materials Part 5: Removal of methyl mercaptan
TC 207
Environmental management
ISO/CD
14031
TC 211
Geographic information/Geomatics
ISO/CD
19101-1
ISO/CD
19115-1
ISO/CD
19135-2
Geographic information - Procedures for item registration Part 2: XML Schema Implementation
TC 219
Floor coverings
ISO/CD
16581
Resilient Floor Covering Determination of the efect of simulated movement of a furniture leg
TC 223
Societal Security
ISO/CD
22398
TC 229
Nanotechnologies
ISO/DTS
80004-4
JTC 1
Information technology
ISO/IEC CD
25041
Systems and software engineering Systems and software Quality Requirements and Evaluation
(SQuaRE) Evaluation modules
ISO/IEC CD
29169
ISO/IEC PDTR
90003
Software engineering Guidelines for the application of ISO 9001:2000 to computer software
ISO/IEC CD
27037
ISO/IEC CD
29192-3
ISO/IEC CD
14496-28
Information technology Coding of audio-visual objects Part 28: Composite font representation
ISO/IEC CD
24730-2
Information technology Automatic and identification for data capture techniques Real-time
locating systems (RTLS) Part 2: 2,4 GHz air interface protocol
ISO/IEC CD
24730-21
Information technology Real-time locating systems (RTLS) Part 21: SO/IEC 24730-2 transmitters
operating with a single spread code and employing a DBPSK data encoding and BPSK spreading
scheme
ISO/IEC CD
24730-22
Information technology Real-time locating systems (RTLS) Part 22: ISO/IEC 24730-2
transmitters operating with multiple spread codes and employing a QPSK data encoding and Walsh
ofset QPSK (WOQPSK) spreading scheme
ISO/IEC
197946:2005/PDAM
1
Information technology Biometric data interchange formats Part 6: Iris image data
Amendment 1: Conformance testing methodology
ISO/IEC PDTR
29156
Guidance for specifying performance requirements to meet security & usability needs in applications
using biometrics
DIS circulated
Period from 01 January to 31 January 2011
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 2
ISO/DIS
10509
Fasteners
*
2011-06-25
TC 6
ISO/DIS 1974 *
2011-06-14
2011-06-21
TC 8
ISO/DIS
13073-1
ISO/DIS 3730 *
2011-06-06
2011-06-18
Shipbuilding and marine structures Deck machinery Towing winches for deep
sea use
2011-06-18
TC 17
Steel
ISO/DIS 9364
2011-06-18
2011-06-22
2011-06-22
ISO/DIS
15208
2011-06-26
ISO/DIS
15211
Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and
high strength steel
2011-06-22
ISO/DIS
15698-1.2
2011-03-06
ISO/DIS
15698-2.2
Steel for the reinforcement of concrete Headed bars Part 2: Test methods
2011-03-06
TC 20
ISO/DIS
15889
Space data and information transfer systems The data description language EAST
specification
2011-06-06
Space data and information transfer systems - Requirements for bodies providing
audit and certification of candidate trustworthy digital repositories
2011-06-19
ISO/DIS
26871
2011-06-29
TC 21
ISO/DIS
7240-5
2011-06-06
ISO/DIS
6182-2
2011-06-28
2011-06-28
2011-06-28
TC 22
Road vehicles
ISO/DIS
14229-2
Road vehicles Unified diagnostic services (UDS) Part 2: Session layer services
2011-07-02
ISO/DIS
14229-4
2011-07-02
ISO/DIS
18541-1
2011-06-21
ISO/DIS
26262-10.2
2011-03-19
ISO/DIS
13063
2011-06-15
TC 23
ISO/DIS
15886-3
2011-06-12
TC 29
Small tools
ISO/DIS 5429 *
2011-06-06
2011-06-26
TC 30
ISO/DIS
12242
TC 38
Textiles
ISO/DIS 6938 *
2011-06-29
2011-06-27
TC 39
Machine tools
ISO
*
23125:2010/
DAmd 1
TC 44
ISO/DIS
17653
2011-06-14
2011-06-21
2011-06-07
Gas welding equipment Blowpipes for gas welding, heating and cutting
Specifications and tests Amendment 1
2011-06-14
TC 45
ISO 99242:2000/DAm
d1
TC 54
Essential oils
ISO
*
212:2007/DA
md 1
2011-06-18
ISO/DIS 3517 *
Oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigardia Loisel,
syn. Citrus vulgaris Risso)
2011-06-25
2011-07-02
TC 59
ISO/DIS 6927 *
2011-06-14
TC 61
ISO/DIS
4892-2
Plastics
*
2011-06-07
TC 67
ISO/DIS
27509
TC 68
ISO/DIS
16609
Petroleum and natural gas industries Compact flanged connections with IX seal
ring
2011-06-14
Financial services
*
2011-06-06
TC 70
ISO/DIS
8178-9
2011-06-19
TC 79
ISO/DIS
6362-1
Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles
Part 1: Technical conditions for inspection and delivery
2011-06-18
Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles
Part 2: Mechanical properties
2011-06-18
Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles
Part 3: Extruded rectangular bars Tolerances on shape and dimensions
(Revision of ISO 6362-3:2001)
2011-06-18
ISO/DIS
6362-4
Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles
Part 4: Profiles Tolerances on shape and dimensions
2011-06-18
Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles
Part 5: Round, square and hexagonal bars Tolerances on shape and dimensions
2011-06-18
Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles
Part 6: Round, square, rectangular and hexagonal tubes Tolerances on shape
and dimensions
2011-06-18
ISO/DIS
6362-7
Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles
Part 7: Chemical composition
2011-06-18
ISO/DIS
6363-1
Wrought aluminium and aluminium alloy cold-drawn rods/bars, tubes and wires
Part 1: Technical conditions for inspection and delivery
2011-06-18
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes and wires
Part 2: Mechanical properties
2011-06-18
Wrought aluminium and aluminium alloy cold-drawn rods/bars, tubes and wires
Part 3: Drawn round bars and wires Tolerances on form and dimensions
(symmetric plus and minus tolerances on diameter)
2011-06-18
Wrought aluminium and aluminium alloy cold-drawn rods/bars, tubes and wires
Part 4: Drawn rectangular bars and wires Tolerances on form and dimensions
2011-06-18
Wrought aluminium and aluminium alloy cold-drawn rods/bars, tubes and wires
Part 5: Drawn square and hexagonal bars Tolerances on form and dimensions
2011-06-18
TC 85
ISO/DIS
20785-1
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes Part 6:
Drawn round tubes Tolerances on form and dimensions
2011-06-18
2011-06-19
TC 94
ISO/DIS
12311
2011-06-21
ISO/DIS
12609-1
Eyewear for protection against intense light sources used on humans and animals
for cosmetic and medical applications Part 1: Specification for products
2011-06-16
ISO/DIS
12609-2
Eyewear for protection against intense light sources used on humans and animals
for cosmetic and medical applications Part 2: Guidance for use
2011-06-16
TC 106
Dentistry
ISO/DIS
12836
2011-06-28
ISO/DIS
13017
2011-06-21
ISO/DIS
2011-06-14
13504
ISO/DIS
21672-1
2011-06-21
ISO/DIS
21672-2
2011-06-14
ISO/DIS
20126.2
2011-03-21
TC 108
ISO/DIS
18312-2
2011-06-14
ISO/DIS
18436-1
2011-06-06
2011-06-14
TC 122
ISO/DIS
13274
Packaging
*
TC 131
ISO/DIS
21017
2011-06-07
TC 135
2011-06-22
Non-destructive testing
ISO/DIS
16810
2011-06-25
ISO/DIS
16811
2011-06-25
ISO/DIS
16823
2011-06-25
ISO/DIS
16826
2011-06-25
ISO/DIS
16827
2011-06-25
ISO/DIS
16828
2011-06-25
ISO/DIS
16831
2011-06-25
TC 142
ISO/DIS
10121-2
TC 145
ISO/DIS
3864-3
Test methods for assessing the performance of gas-phase air cleaning media and
devices for general ventilation Part 2: Gas phase air cleaning devices (GPACD)
2011-06-21
Graphical symbols
*
Graphical symbols Safety colours and safety signs Part 3: Design principles for
graphical symbols for use in safety signs
2011-06-12
TC 146
ISO/DIS
12219-2
Air quality
*
TC 147
ISO 61072:2006/DAm
d1
Indoor air of road vehicles Part 2: Screening method for the determination of the
emissions of volatile organic compounds from vehicle interior parts and materials
Bag method
2011-06-21
Water quality
*
2011-06-14
TC 150
ISO
*
14630:2008/
DAmd 1
2011-06-21
ISO/DIS
13175-3
Implants for surgery Calcium phosphates Part 3: Hydroxyapatite and betatricalcium phosphate bone substitutes
2011-06-21
ISO/DIS
25832-1
Implants for surgery Seamless tubes for surgical implants Part 1: Materials
based on iron
2011-06-29
ISO/DIS
9714-1
Orthopaedic drilling instruments Part 1: Drill bits, taps and countersink cutters
2011-06-14
TC 156
ISO/DIS
17752
Corrosion of metals and alloys Procedures to determine and estimate runof rates
of metals from materials as a result of atmospheric corrosion
TC 164
ISO/DIS 7800 *
2011-06-27
2011-06-06
TC 165
Timber structures
ISO/DIS
22389-2
TC 171
ISO/DIS
14641-1
TC 172
ISO/DIS 8578 *
2011-06-27
2011-06-28
2011-06-12
2011-03-14
2011-06-28
ISO/DIS
11987
2011-06-21
2011-06-21
TC 184
ISO/DIS
14649-13
2011-06-20
ISO/DIS
14649-14
2011-06-20
TC 188
Small craft
ISO/DIS
16180
2011-06-14
ISO/DIS
25197
Small craft Electrical/electronic control system for steering, shift and throttle
2011-06-21
TC 197
ISO/DIS
14687-2
Hydrogen technologies
*
2011-06-06
TC 207
ISO/DIS
14045
Environmental management
*
TC 211
ISO/DIS
19152
2011-06-21
Geographic information/Geomatics
*
TC 212
ISO/DIS
15189
2011-06-21
2011-06-07
2011-06-28
TC 215
ISO/DIS
13119
Health informatics
*
TC 219
Floor coverings
ISO/DIS 4919 *
2011-06-28
2011-06-14
TC 246
ISO/DIS
12931
CASCO
ISO/IEC DIS
17020
2011-06-14
2011-06-14
JTC 1
Information technology
ISO/IEC DIS
9834-1
2011-06-22
2011-06-28
2011-06-28
2011-07-01
ISO/IEC DIS
28360
2011-06-28
2011-05-25
FDIS circulated
Period from 01 January to 31 January 2011
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the
date shown
* Available in English only
Vote terminates
TC 2
ISO/FDIS
2702
Fasteners
*
2011-03-28
TC 6
ISO/FDIS
10376
TC 12
ISO 80000*
9:2009/FDAm
2011-03-26
2011-03-12
d1
TC 17
ISO/FDIS
9328-1
Steel
*
Steel flat products for pressure purposes Technical delivery conditions Part
1: General requirements
2011-03-21
Steel flat products for pressure purposes Technical delivery conditions Part
2: Non-alloy and alloy steels with specified elevated temperature properties
2011-03-21
Steel flat products for pressure purposes Technical delivery conditions Part
3: Weldable fine grain steels, normalized
2011-03-21
Steel flat products for pressure purposes Technical delivery conditions Part
4: Nickel-alloy steels with specified low temperature properties
2011-03-21
Steel flat products for pressure purposes Technical delivery conditions Part
5: Weldable fine grain steels, thermomechanically rolled
2011-03-21
Steel flat products for pressure purposes Technical delivery conditions Part
6: Weldable fine grain steels, quenched and tempered
2011-03-21
Steel flat products for pressure purposes Technical delivery conditions Part
7: Stainless steels
2011-03-21
TC 23
ISO/FDIS
11783-5
Tractors and machinery for agriculture and forestry Serial control and
communications data network Part 5: Network management
2011-03-15
2011-03-08
TC 28
ISO/FDIS
20884
2011-03-21
TC 34
ISO/FDIS
3720
Food products
*
2011-04-01
TC 35
ISO/FDIS
29601
2011-03-14
TC 38
ISO/FDIS
3759
Textiles
*
2011-03-28
TC 39
ISO/FDIS
230-10
Machine tools
*
TC 44
ISO/FDIS
15792-3
Test code for machine tools Part 10: Determination of the measuring
performance of probing systems of numerically controlled machine tools
2011-03-22
2011-04-14
2011-03-18
TC 45
ISO
7751:1991/F
DAmd 1
TC 58
ISO/FDIS
7866
Rubber and plastics hoses and hose assemblies Ratios of proof and burst
pressure to maximum working pressure Amendment 1: Replacement of
"design working pressure" by "maximum working pressure" throughout text
2011-03-28
Gas cylinders
*
2011-03-14
TC 61
ISO/FDIS
6721-1
Plastics
*
2011-04-21
2011-03-14
ISO/FDIS
294-5
2011-03-20
TC 67
ISO/FDIS
10414-2
Petroleum and natural gas industries Field testing of drilling fluids Part 2:
Oil-based fluids
2011-03-28
TC 89
Wood-based panels
ISO/FDIS
10033-1
2011-03-22
ISO/FDIS
10033-2
2011-03-22
TC 94
ISO/FDIS
27065
TC 106
Dentistry
ISO
*
21671:2006/
FDAmd 1
TC 108
2011-03-21
2011-03-28
ISO/FDIS
18437-5
2011-03-26
ISO/FDIS
29821-1
2011-04-01
TC 118
ISO/FDIS
28927-10
2011-03-21
(Revision of ISO 8662-2:1992, ISO 8662-3:1992, ISO 8662-5:1992, ISO 86622:1992/Amd 1:1999, ISO 8662-3:1992/Amd 1:1999, ISO 8662-5:1992/Amd
1:1999)
TC 120
ISO/FDIS
14930
Leather
*
TC 123
ISO/FDIS
4384-2
2011-03-13
Plain bearings
*
2011-03-21
TC 131
ISO/FDIS
16589-1
2011-03-18
2011-03-18
2011-03-18
2011-03-18
TC 138
ISO 21003*
2:2008/FDAm
d1
Multilayer piping systems for hot and cold water installations inside buildings
Part 2: Pipes Amendment 1
2011-03-28
ISO/FDIS
21751
Plastics pipes and fittings Decohesion test of electrofusion assemblies Stripbend test
2011-03-07
TC 145
ISO/FDIS
3864-1
Graphical symbols
*
Graphical symbols Safety colours and safety signs Part 1: Design principles
for safety signs and safety markings
2011-03-20
Graphical symbols Safety colours and safety signs Safety signs used in
workplaces and public areas Amendment 78: Safety sign M025: Protect
infants' eyes with opaque eye protection
2011-03-18
ISO
7010:2003/F
DAmd 79
Graphical symbols Safety colours and safety signs Safety signs used in
workplaces and public areas Amendment 79: Safety sign M026: Use protective
apron
2011-03-18
ISO
7010:2003/F
DAmd 81
Graphical symbols Safety colours and safety signs Safety signs used in
workplaces and public areas Amendment 81: Safety sign P031: Do not alter
the state of the switch
2011-03-18
ISO
7010:2003/F
DAmd 82
Graphical symbols Safety colours and safety signs Safety signs used in
workplaces and public areas Amendment 82: Safety sign P032: Do not use for
face grinding
2011-03-18
TC 146
ISO/FDIS
25139
Air quality
*
TC 147
2011-03-14
Water quality
ISO/FDIS
28540
2011-03-13
ISO/FDIS
5667-13
2011-04-04
TC 150
ISO/FDIS
7206-2
Implants for surgery Partial and total hip joint prostheses Part 2: Articulating
surfaces made of metallic, ceramic and plastics materials
2011-03-08
TC 157
ISO/FDIS
25841
2011-03-14
ISO/FDIS
29942
2011-03-18
TC 164
ISO/FDIS
1352
2011-03-20
TC 172
ISO/FDIS
14997
2011-03-26
2011-04-21
2011-03-07
TC 184
ISO/FDIS
10218-1
2011-03-21
TC 190
ISO/FDIS
22155
2011-03-21
Soil quality
*
2011-03-05
TC 198
ISO/FDIS
15883-6
TC 205
2011-03-21
ISO/FDIS
14908-1
2011-03-05
ISO/FDIS
14908-2
2011-03-05
ISO/FDIS
14908-3
2011-03-05
ISO/FDIS
14908-4
2011-03-05
TC 207
ISO/FDIS
14066
Environmental management
*
TC 213
2011-03-18
ISO
1101:2004/F
DAmd 1
2011-03-14
ISO/FDIS
10360-7
2011-03-07
ISO/FDIS
13385-1
2011-03-28
2011-03-28
2011-03-14
product verification
(Revision of ISO/TS 14253-2:1999, ISO/TS 14253-2:1999/Cor 1:2007)
ISO/FDIS
14253-3
2011-03-14
2011-04-02
TC 215
ISO/FDIS
18308
Health informatics
*
2011-03-26
TC 221
ISO/FDIS
10773
Geosynthetics
*
TMB
ISO/IEC FDIS
80079-34
JTC 1
Information technology
ISO/IEC FDIS
29103
2011-03-28
2011-03-26
2011-04-01
ISO/IEC
*
14492:2001/
FDAmd 3
2011-03-05
ISO/IEC FDIS
14496-25
2011-04-01
Standards published
New International Standards published between 01 January and 31 January 2011
* Available in English only
2011-03-07
Price group
TC 6
ISO 52642:2011
TC 10
ISO
*
12756:1998/
Amd 1:2011
Drawing and writing instruments Ball point pens and roller ball pens Vocabulary
Amendment 1: Viscosity of the writing fluid
TC 17
Steel
XZ
ISO
3575:2011
ISO
4998:2011
ISO
4999:2011
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of
commercial, drawing and structural qualities
ISO
5000:2011
ISO
14788:2011
ISO
16160:2011
TC 22
Road vehicles
ISO
12251:2011
ISO
7116:2011
TC 25
ISO/TR 9452:2011
TC 28
ISO
3405:2011
ISO
*
3987:2010/C
or 1:2011
ISO 207831:2011
ISO
20843:2011
TC 34
Food products
ISO/TS
11133-
free
XZ
2:2003/Amd
1:2011
ISO
3656:2011
TC 35
ISO
1519:2011
TC 43
Acoustics
ISO 103021:2011
ISO
10844:2011
Acoustics Specification of test tracks for measuring noise emitted by road vehicles
and their tyres
TC 44
ISO
3581:2003/A
md 1:2011
Welding consumables Covered electrodes for manual metal arc welding of stainless
and heat-resisting steels Classification Amendment 1
ISO
15626:2011
TC 58
Gas cylinders
ISO
10961:2010
TC 59
XZ
ISO 108452:2011
ISO 108453:2011
ISO 108454:2011
Construction procurement Part 4: Standard conditions for the calling for expressions
of interest
ISO 108455:2011
ISO 108456:2011
ISO 108457:2011
ISO 108458:2011
TC 61
Plastics
ISO
14125:1998/
Amd 1:2011
TC 79
ISO
8251:2011
TC 85
XZ
ISO
27048:2011
Radiation protection Dose assessment for the monitoring of workers for internal
radiation exposure
TC 92
Fire safety
ISO 119252:2010/Cor
1:2011
free
ISO
12863:2010/
Cor 1:2011
Standard test method for assessing the ignition propensity of cigarettes Technical
Corrigendum 1
free
TC 106
Dentistry
ISO
28399:2011
TC 107
ISO
26945:2011
ISO 287061:2008
ISO 287062:2008
ISO 287063:2008
ISO 287064:2008
ISO 287211:2008
Vitreous and porcelain enamels Glass-lined apparatus for process plants Part 1:
Quality requirements for apparatus, components, appliances and accessories
ISO 287212:2008
Vitreous and porcelain enamels Glass-lined apparatus for process plants Part 2:
Designation and specification of resistance to chemical attack and thermal shock
ISO 287213:2008
Vitreous and porcelain enamels Glass-lined apparatus for process plants Part 3:
Thermal shock resistance
TC 108
ISO 108167:2009
Mechanical vibration Evaluation of machine vibration by measurements on nonrotating parts Part 7: Rotodynamic pumps for industrial applications, including
measurements on rotating shafts
TC 114
Horology
IEC 600863:2011
TC 118
ISO 2892711:2011
Hand-held portable power tools Test methods for evaluation of vibration emission
Part 11: Stone hammers
TC 119
Powder metallurgy
ISO
3927:2011
ISO
28080:2011
TC 121
ISO
5364:2008
TC 159
Ergonomics
ISO
24503:2011
TC 163
ISO
12623:2011
ISO
12624:2011
ISO
12628:2011
ISO
12629:2011
TC 173
ISO
15621:2011
TC 194
ISO
14155:2011
Clinical investigation of medical devices for human subjects Good clinical practice
TC 199
Safety of machinery
ISO 290428:2011
ISO 290429:2011
TC 204
ISO
21216:2011
ISO
24099:2011
ISO
29283:2011
TC 214
ISO 166533:2011
Mobile elevating work platforms Design, calculations, safety requirements and test
methods relative to special features Part 3: MEWPs for orchard operations
TC 217
Cosmetics
ISO
24444:2010
TC 235
ISO/TS
10674:2011
IULTCS
ISO
13365:2011
ISO 170721:2011
ISO 170722:2011
CASCO
ISO/IEC
17021:2011
JTC 1
Information technology
ISO/IEC ISP
291102:2011
Software engineering Lifecycle profiles for Very Small Entities (VSEs) Part 2:
Framework and taxonomy
ISO/IEC ISP
29110-41:2011
Software engineering Lifecycle profiles for Very Small Entities (VSEs) Part 4-1:
Profile specifications: Generic profile group
ISO/IEC
*
7816-1:2011
ISO/IEC
103736:2011
XD
ISO/IEC
*
1449627:2009/Amd
2:2011
XZ
ISO/IEC
154441:2004/Amd
3:2010
Information technology JPEG 2000 image coding system: Core coding system
Part 1: Amendment 3: Profiles for broadcast applications
XZ
ISO/IEC
230005:2011
ISO/IEC
230063:2011
ISO/IEC
*
16022:2006/
Cor 2:2011
free
ISO/IEC TR
180476:2011
ISO/IEC
29143:2011
ISO/IEC
197881:2011
ISO/IEC
free
197948:2006/Cor
1:2011
ISO/IEC
197957:2011
ISO/IEC
247093:2011
Standards confirmed
The following International Standards are confimred for a five year period:
TC 5
ISO 7-2:2000
(reconfirmed)
TC 8
ISO 3904:1990
(reconfirmed)
ISO 5480:1979
(reconfirmed)
ISO 6345:1990
(reconfirmed)
ISO 15401:2000
(reconfirmed)
ISO 15402:2000
(reconfirmed)
TC 10
ISO 2594:1972
(reconfirmed)
ISO 4067-2:1980
(reconfirmed)
ISO 7437:1990
(reconfirmed)
ISO 9431:1990
(reconfirmed)
TC 17
Steel
ISO 4960:2007
ISO 5954:2007
TC 22
Road vehicles
ISO 8349:2002
TC 33
Refractories
ISO 1893:2007
ISO 10080:1990
(reconfirmed)
XD
TC 34
Food products
ISO 10632:2000
(reconfirmed)
ISO 17059:2007
ISO 1956-2:1989
(reconfirmed)
ISO 3631:1978
(reconfirmed)
ISO 3659:1977
(reconfirmed)
ISO 3959:1977
(reconfirmed)
ISO 6477:1988
(reconfirmed)
ISO 6661:1983
(reconfirmed)
ISO 6662:1983
(reconfirmed)
ISO 6664:1983
(reconfirmed)
ISO 6665:1983
(reconfirmed)
ISO 6822:1984
(reconfirmed)
ISO 6949:1988
(reconfirmed)
ISO 7558:1988
(reconfirmed)
ISO 7561:1984
(reconfirmed)
ISO 7701:1994
(reconfirmed)
ISO 7920:1984
(reconfirmed)
ISO 8683:1988
(reconfirmed)
ISO 9376:1988
(reconfirmed)
ISO 6667:1985
(reconfirmed)
ISO 6669:1995
(reconfirmed)
ISO 11292:1995
(reconfirmed)
ISO 11294:1994
(reconfirmed)
TC 39
Machine tools
ISO 3371:1975
(reconfirmed)
ISO 8526-1:1990
(reconfirmed)
ISO 8526-2:1990
(reconfirmed)
TC 46
ISO 3297:2007
TC 48
Laboratory equipment
ISO 641:1975
(reconfirmed)
ISO 695:1991
(reconfirmed)
ISO 719:1985
(reconfirmed)
ISO 4796-2:2000
(reconfirmed)
ISO 4796-3:2000
(reconfirmed)
TC 54
Essential oils
ISO 3527:2000
(reconfirmed)
ISO 8432:1987
(reconfirmed)
ISO 17382:2007
TC 58
Gas cylinders
ISO 11625:2007
TC 72
ISO 9904:2000
(reconfirmed)
TC 94
ISO 20346:2004
TC 112
Vacuum technology
ISO 9803-1:2007
ISO 9803-2:2007
ISO 21358:2007
ISO 21360:2007
TC 119
Powder metallurgy
ISO 3954:2007
ISO 4491-1:1989
(reconfirmed)
TC 121
ISO 5358:1992
(reconfirmed)
ISO 8835-2:2007
ISO 8835-3:2007
ISO 11195:1995
(reconfirmed)
ISO 8836:2007
ISO 7396-2:2007
TC 145
Graphical symbols
ISO/TR 10488:1991
ISO 80416-4:2005
TC 147
Water quality
ISO 10304-1:2007
ISO 11885:2007
ISO 8689-2:2000
(reconfirmed)
ISO 10634:1995
(reconfirmed)
ISO 10706:2000
(reconfirmed)
ISO 10712:1995
(reconfirmed)
ISO 13829:2000
(reconfirmed)
TC 204
ISO 24535:2007
TC 206
Fine ceramics
ISO 23145-1:2007
TC 213
ISO 10360-3:2000
(reconfirmed)
TC 217
Cosmetics
ISO 18415:2007
ISO 18416:2007
CASCO
ISO/IEC 17021:2006
Standards withdrawn
Period from 01 January to 31 January 2011
TC 43
Acoustics
ISO 10302:1996
TC 118
ISO 8662-14:1996
TC 194
ISO 14155-1:2003
ISO 14155-2:2003
JTC 1
Information technology
ISO/IEC 7816-1:1998
ISO/IEC 10373-6:2001
ISO/IEC 23000-5:2008
ISO/IEC TR 18047-6:2008
Meeting calendar
(update at 01 January 2011)
* Information definite but meeting not yet formally convened
** Provisional
February 2011
7-8
Milan (Italy)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied
processes
7-11 Melbourne
(Australia)
Paris (France)
TC 213
1617
Stockholm
(Sweden)
17
Hamburg
(Germany)
18
McLean, Virginia
(USA)
2125
Seattle (USA)
** JTC 1/SC 35
2125
Osaka (Japan)
TC 107
23
Paris (France)
TC 23/SC 2
2324
Geneva
(Switzerland)
TMB
28-1 Oostenede
(Belgium)
TC 23/SC 4
28-4 Melbourne
(Australia)
TC 251
JTC 2
Joint Project Committee - Energy efficiency and renewable energy sources Common terminology
TC 122
Packaging
** TC 8/SC 8
TC 154
February-March 2011
March 2011
1-3
Atlanta (USA)
Bangkok
(Thailand)
Frankfurt
(Germany)
3-4
Berlin (Germany)
TC 58/SC 4
7-8
Berlin (Germany)
TC 1
Screw threads
7-9
Sydney
(Australia)
TC 243
TC 240
7-11 Sydney
(Australia)
11
Paris (France)
1218
Strasbourg
(France)
1516
Geneva
(Switzerland)
** COUNCIL
Council
1718
Geneva
(Switzerland)
COUNCIL
Council
1819
Tokyo (Japan)
TC 219
Floor coverings
24
Milan (Italy)
24
Milan (Italy)
24
Milan (Italy)
25
Milan (Italy)
TC 118
28
Tokyo (Japan)
TC 59/SC 3
29
Berlin (Germany)
TC 117
Fans
3031
Milan (Italy)
3031
Berlin (Germany)
TC 22/SC 1
JTC 1/SC 36
April 2011
1
Prague (Czech
Republic)
JTC 1/SC 34
2-3
Oostenede
(Belgium)
TC 23/SC 3
3-4
Oostenede
(Belgium)
TC 23
3-8
Berlin (Germany) *
TC 127
Earth-moving machinery
Urbach
(Germany)
TC 161
Control and protective devices for gas and/or oil burners and appliances
4-5
Madrid (Spain)
5-6
Madrid (Spain)
TC 34/SC 2
Bratislava
TC 226
(Slovakia)
7
London (United
Kingdom)
TC 43/SC 2
Acoustics/Building acoustics
Paris (France)
TC 92/SC 1
TC 92/SC 2
Paris (France)
TC 92/SC 3
7-8
London (United
Kingdom)
TC 43/SC 1
Acoustics/Noise
London (United
Kingdom)
TC 43
Acoustics
Paris (France)
TC 92
Fire safety
TC 92/SC 4
Delft
(Netherlands)
1012
Porto (Portugal) *
1112
Tokyo (Japan)
TC 210
1116
Graphic technology
1314
Dresden
(Germany)
TC 199
Safety of machinery
14
Milan (Italy)
TC 8/SC 12
15
Porto (Portugal)
TC 23/SC 7
1920
Berlin (Germany)
TC 22/SC 1
2021
Astana
(Kazakhstan)
TC 67/SC 6
2629
Niagara Falls
(Canada)
TC 85/SC 2
May 2011
2-3
Paris (France)
TC 155
2-4
Delft
(Netherlands)
TC 249
2-6
Sydney
(Australia)
TC 46
3-4
Paris (France)
TC 44/SC 3
4-5
Geneva
(Switzerland)
TC 94
6-13 Geneva
(Switzerland)
7-10 (Netherlands)
Berlin (Germany)
TC 114
Horology
9-13 Adelaide
(Australia)
TC 241
11
Berlin (Germany)
11
Porto de
*
Galinhas (Brazil)
12
Delft
(Netherlands)
TC 68
12
Berlin (Germany)
1213
Florida (USA)
1213
Vienna (Austria) *
TC 253
13
Franklin Lakes
(USA)
TC 84
13
Berlin (Germany)
TC 110
Industrial trucks
13
Beijing (China)
TC 195
15
Zurich
(Switzerland)
** TC 39/SC 2
1617
Bratislava
(Slovakia)
TC 44/SC 11 Welding and allied processes/Qualification requirements for welding and allied
processes personnel
1618
Frankfurt
(Germany)
TC 214
1619
Kobe (Japan)
1619
Stockholm
(Sweden)
TC 156
1620
Kona, Hawaii
(USA)
JTC 1/SC 32
1620
Beijing (China)
TC 247
1620
Berlin (Germany)
TC 248
1622
Vienna (Austria) *
TC 224
1819
Bratislava
(Slovakia)
1819
Pau (France)
20
Rome (Italy)
20
2227
Financial services
TC 228
St. Petersburg
(Russian
Federation)
TC 229
Nanotechnologies
Portland, Oregon *
(USA)
2324
Stavanger
(Norway)
** TC 67/SC 4
2327
2327
Chicago (USA)
** TC 23/SC 6
2327
TC 171
2327
Kuopio (Finland) *
TC 215
Health informatics
2328
Jeju (Korea,
Republic of)
TC 147
Water quality
24
Stockholm
(Sweden)
TC 29/SC 2
2426
St. Petersburg
(Russian
Federation)
TC 67/SC 5
25
Milan (Italy)
TC 136
Furniture
2527
26
Stockholm
(Sweden)
TC 29/SC 9
2627
Delft
(Netherlands)
TC 211
Geographic information/Geomatics
27
Stockholm
(Sweden)
TC 29
Small tools
31
Pretoria (South
Africa)
TC 96/SC 7
Cranes/Tower cranes
TC 96
Cranes
TC 85/SC 5
TC 96/SC 6
Cranes/Mobile cranes
TC 257
Energy savings
TC 96/SC 4
Cranes/Test methods
TC 96/SC 8
Cranes/Jib cranes
Cranes/Use, operation and maintenance
TC 6
May-June 2011
30-4 Pretoria (South
Africa)
31-2 London (United
Kingdom)
June 2011
1
Pretoria (South
Africa)
Pretoria (South
Africa)
Pretoria (South
Africa)
TC 96/SC 5
2-3
Pretoria (South
Africa)
Pretoria (South
Africa)
Pretoria (South
TC 96/SC 3
TC 96/SC 9
Africa)
4
Pretoria (South
Africa)
TC 96/SC 2
6-9
Cranes/Terminology
Graphical symbols
TC 42
Cannes (France) *
Cannes (France) *
Cannes (France) *
TC 35/SC 9
TC 91
Photography
10
Cannes (France) ** TC 35
10
Vancouver
(Canada)
** TC 192
Gas turbines
1217
Seoul (Korea,
Republic of)
** TC 37
1317
Brussels
(Belgium)
TC 4
Rolling bearings
1317
Tokyo (Japan)
TC 69
1317
Vancouver
(Canada)
TC 121
1317
Vancouver
(Canada)
1317
Vancouver
(Canada)
1415
Geneva
(Switzerland)
TMB
15
Stockholm
(Sweden)
TC 29/SC 5
1517
Kobe (Japan)
TC 8/SC 1
2024
(USA)
** JTC 1/SC 6
2024
Bournemouth
(United
Kingdom)
TC 34/SC 9
Food products/Microbiology
2630
Hollywood,
Florida (USA)
TC 85/SC 6
29
Berlin (Germany) *
TC 44/SC 6
2930
London (United
Kingdom)
** TC 29/SC 10 Small tools/Assembly tools for screws and nuts, pliers and nippers
San Francisco
(USA)
** TC 67/SC 3
Hong Kong
(Hong Kong,
China)
** TC 71
(South Africa)
** TC 133
June-July 2011
27-1 Berlin (Germany)
27-1 Paris (France)
TC 94/SC 6
** TC 188
Small craft
** TC 204
July 2011
1115
Delft
(Netherlands)
REMCO
24
Turin (Italy)
JTC 1/SC 29
August 2011
(Sweden)
** JTC 1/SC 35
** TC 163
1214
Chicago (USA)
1216
Vienna (Austria) *
1216
Florianopolis
(Brazil)
** TC 150
1216
Florianopolis
(Brazil)
1216
Adelaide
(Australia)
TC 190
Soil quality
1216
Rotorua (New
Zealand)
TC 218
Timber
1315
Moscow (Russian *
Federation)
TC 67
1517
Brescia (Italy)
** TC 201
1824
Phoenix (USA)
TC 106
Dentistry
1824
Paris (France)
TC 164
19
Chicago (USA)
TC 21/SC 3
Equipment for fire protection and fire fighting/Fire detection and alarm
systems
19
Chicago (USA)
TC 21/SC 11 Equipment for fire protection and fire fighting/Smoke and heat control
systems and components
1920
Paris (France)
1920
TMB
19-
Paris (France)
September 2011
TC 205
22
Tear (T)
1923
Bali (Indonesia) *
TC 165
1923
Adelaide
(Australia)
1923
Adelaide
(Australia)
1923
Adelaide
(Australia)
1923
Adelaide
(Australia)
20
Chicago (USA)
** TC 21/SC 6
20
Berlin (Germany) *
TC 29/SC 8
2022
Paris (France)
2023
21
Chicago (USA)
21
Vienna (Austria) *
21
Paris (France)
2122
Chicago (USA)
TC 21/SC 8
2223
2223
Paris (France)
23
Chicago (USA)
TC 21
23
Sao Paulo
(Brazil)
TC 142
24
COUNCIL
Council
2627
Geneva
(Switzerland)
TAG 8
Building
2930
(Unknown)
** TC 44
TC 21/SC 2
Timber structures
Equipment for fire protection and fire fighting/Foam and powder media and
fixed firefighting systems using foam and powder
Small tools/Tools for pressing and moulding
Equipment for fire protection and fire fighting/Gaseous media and firefighting
systems using gas
Edinburgh
(United
Kingdom)
** TC 24/SC 4
(Unknown)
** TC 44/SC 9
(France)
** TC 59/SC 8
(Malaysia)
** TC 61/SC 4
Plastics/Burning behaviour
Beijing (China)
** TC 213
** TC 41/SC 1
(United
Kingdom)
** TC 41/SC 3
(United
Kingdom)
** TC 41/SC 4
October 2011
3-7
Sydney
(Australia)
TC 89
Wood-based panels
3-7
London (United
Kingdom)
6-7
Geneva
(Switzerland)
CASCO
TC 27
1014
(Unknown)
** TC 25
1014
(Japan)
1014
1014
Milan (Italy)
TC 209
1621
Suzhou (China)
1719
Tokyo (Japan)
TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their
joints
1720
Yokohama
(Japan)
TC 45/SC 2
1721
Yokohama
(Japan)
TC 45
1820
London (United
Kingdom)
TC 202
Microbeam analysis
21
Courbevoie,
Paris (France)
TC 244
2428
Tokyo (Japan)
TC 38
Textiles
2428
2527
Beltsville,
*
Maryland (USA)
2528
Amsterdam
(Netherlands)
** TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and
fittings for soil, waste and drainage (including land drainage)
26
Amsterdam
(Netherlands)
** TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and
fittings for the supply of gaseous fuels
27
Amsterdam
(Netherlands)
** TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and
fittings for industrial applications
London (United
Kingdom)
** TC 59/SC 15 Buildings and civil engineering works/Performance criteria for single family
attached and detached dwellings
(China)
** TC 111
(China)
** TC 111/SC 1 Round steel link chains, chain slings, components and accessories/Chains and
chain slings
(China)
(Netherlands)
** TC 138
Amsterdam
(Netherlands)
** TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties
of pipes, fittings and valves of plastic materials and their accessories -- Test
methods and basic specifications
** TC 206
Fine ceramics
October-November 2011
31-3 London (United
Kingdom)
November 2011
2-4
Bangkok
(Thailand)
TC 123
2-4
Bangkok
(Thailand)
2-4
Bangkok
(Thailand)
2-4
Bangkok
(Thailand)
2-4
Bangkok
(Thailand)
2-4
Bangkok
(Thailand)
Cincinnati (USA) *
(Malaysia)
TC 60
** TC 238
Plain bearings
Gears
Solid biofuels
7-12 (USA)
JTC 1
Information technology
10
Annapolis (USA) *
TC 70/SC 7
1011
Venice (Italy)
TC 227
Springs
1416
Ceramic tile
1418
(South Africa)
Nanotechnologies
21-
Berlin (Germany) *
** TC 229
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied
22
2125
processes
Stellenbosch
(South Africa)
** TC 98
(Unknown)
** TC 34/SC 7
(Japan)
Pau (France)
** TC 67/SC 3
November-December 2011
26-1 (Israel)
** TC 23/SC 18 Tractors and machinery for agriculture and forestry/Irrigation and drainage
equipment and systems
December 2011
5-9
Sydney
(Australia)
** TC 30/SC 7
(Japan)
(South Africa)
** TC 211
Geographic information/Geomatics
** TC 130
Graphic technology
Kyoto (Japan)
Refractories
** TC 33
January 2012
Charlotte (USA) ** TC 213
February 2012
2223
Geneva
(Switzerland)
TMB
Florida (USA)
** TC 115
Pumps
(USA)
February-March 2012
25-5 Toulouse
(France)
March 2012
29
(Unknown)
(China)
** JTC 1/SC 6
(Australia)
** JTC 1/SC 36
(Italy)
April 2012
Bern
(Switzerland)
** TC 113
Hydrometry
Durban (South
Africa)
** TC 135
Non-destructive testing
Durban (South
Africa)
Durban (South
Africa)
May 2012
7-11 Berlin (Germany) ** TC 46
10
Chicago (USA)
** TC 68
Financial services
(Unknown)
** TC 126
Geneva
(Switzerland)
Calgary
(Canada)
** TC 67/SC 3
** TC 211
Geographic information/Geomatics
** TC 142
June 2012
1314
TMB
September 2012
3-8
Zurich
(Switzerland)
1921
General Assembly
22
Council
Fine ceramics
Cadiz (Spain)
** TC 213
October 2012
24
Sydney
(Australia)
** TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and
fittings for the supply of gaseous fuels
November 2012
Tokyo (Japan)
** TC 17/SC 1
** TC 211
Geographic information/Geomatics
(Europe)
** JTC 1/SC 24
Delft
(Netherlands)
** TC 23/SC 6
(Unknown)
** TC 34
Food products
Chicago (USA)
** TC 68/SC 4
(South Africa)
** TC 102
Sydney
(Australia)
** TC 138
Sydney
(Australia)
** TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and
fittings for soil, waste and drainage (including land drainage)
(Unknown)
** TC 146
Air quality
(Brazil)
** TC 164
(Finland)
** TC 190
Soil quality
(China)
** TC 202
Microbeam analysis
(France)
** TC 205
(Thailand)
** TC 207
Environmental management
** JTC 1/SC 36
March 2013
(Kenya)
September 2013
(Korea, Republic ** TC 123/SC 2 Plain bearings/Materials and lubricants, their properties, characteristics, test
of)
methods and testing conditions
(Korea, Republic ** TC 123/SC 3 Plain bearings/Dimensions, tolerances and construction details
of)
(Korea, Republic ** TC 123/SC 5 Plain bearings/Quality analysis and assurance
of)
(Korea, Republic ** TC 123/SC 6 Plain bearings/Terms and common items
of)
(Korea, Republic ** TC 123/SC 7 Plain bearings/Special types of plain bearings
of)
Tokyo (Japan)
** TC 142
October 2013
Mexico (Mexico) ** TC 113
Hydrometry
** REMCO
(Unknown)
** TC 38/SC 1
(Norway)
** TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and
fittings for soil, waste and drainage (including land drainage)
** TC 142
** TC 142