Академический Документы
Профессиональный Документы
Культура Документы
Position
Production Manager
Responsibilities
Years of
Experience(s)
Level of
Education(s)
Required Skills/
Competencies
Manage daily production targets, work allocation, raw material consumption &
maintenance
Manage production planning, control, workforce allocation and other routine production
activities
Implement budgets and cost structure, including CAPEX, working capital, cash flows
requirements
Implement best practices in plant management E.g. Lean Production and Value
Engineering
Supervises all employees in a production environment. Ensure the quality and quantity of
cement produced by the factory.
Follow-up the supplying and storing of raw materials and other material for production.
Balance quality, productivity, cost, safety and moral to achieve positive results in all
areas and work
continuously to improve in all areas
Salary for
position
Required No.
ARKAN
Position
Responsibilities
Years of
Experience(s)
Level of
Education(s)
Required Skills/
Within the framework of the production instructions given by the Production manager, is in charge of
raw mix preparation, grinding, clinker and cement production, cement storage after milling in
accordance with Quality Assurance procedures and environment regulations.
Coordinate all interventions in case of breakdown.
Take over the direct responsibility for the control of kiln and mill in case of complicated situation.
Guarantee the respect of the planned consumption of the electrical power.
Ensure proper use of the equipment in particular to avoid damage.
Organize and control the work of relevant team members.
Adapt the tasks of the maintenance employees on shifts.
Adapt the sampling and analysis to the shift quality situation taking into account ISO procedures.
Collaborate with Quarry and Process Department.
Monitor the implementation of Safety procedures.
Organise the safety training of his/ her team according to the safety training plan.
Organise or carry out the monthly controls of the equipment in terms of health, work and fire
protection according to safety plan.
Address any identified dangerous situations.
Ensure that the following reports are properly filled out , daily reports, Shift report and computer based
shift report of incident analysis.
Optimize plant running equipment to ensure efficiency and reliability within the min cost possible.
Follow up on the control cards of the composition of raw mix, clinker quality and cement quality
Decide on the use of additives and fuel according to laboratory results.
Supervise the performance of relevant team members (engineers and technicians), coaches and
trains them, and evaluates their performance in accordance with their Job Profiles &KPIs set.
Control and double check the different materials and products inventory along with carrying monthly
physical stock
Proven track record in leadership, planning, supervision and the ability to balance and
ARKAN
achieve positive results in the areas of safety, quality, productivity, cost and employee
relations.
Competencies
Salary for
position
Required No.
Position
Responsibilities
Within the framework of the production instructions given by the Production manager, is in
charge of raw mix preparation, grinding, clinker and cement production, cement storage after
milling in accordance with Quality Assurance procedures and environment regulations.
Coordinate all interventions in case of breakdown.
Supervise the dispatch foreman.
Take over the direct responsibility for the control of kiln and mill in case of complicated
situation.
Guarantee the respect of the planned consumption of the electrical power.
Ensure proper use of the equipment in particular to avoid damage.
Organize and control the work of relevant team members.
Adapt the tasks of the maintenance employees on shift to the shift situation.
Adapt the sampling and analysis to the shift quality situation taking into account ISO
ARKAN
procedures.
Call the on duty manager in case of need.
Collaborate with Quarry and Process Department.
Monitor the implementation of Safety procedures.
Organize the safety training of his/ her team according to the safety training plan.
Organize or carry out the monthly controls of the equipment in terms of health, work and fire
protection according to safety plan.
Address any identified dangerous situations.
Ensure that the following reports are properly filled out , daily reports, Shift report and computer
based shift report of incident analysis
Follow up on the control cards of the composition of raw mix, clinker quality and cement quality
Decide on the use of additives and fuel according to laboratory results.
Supervise the performance of relevant team members (engineers and technicians), coaches
and trains them, and evaluates their performance in accordance with their Job Profiles & KPIs
set.
Perform any other assignments and tasks related to the business needs of the company, as per
company management direction.
Years of
Experience(s)
Level of
Education(s)
BS Degree in general engineering (with chemical and mechanical engineering as main subjects)
Required Skills/
Competencies
ARKAN
Ability to use related hardware and software
Problem solving methods and tools (Root Cause Failure Analysis, Risk Analysis,).
Good Command of English and Arabic both verbal and written
Salary for
position
AED 11,500 to 15,600 per month all included (accommodation, transportation, basic,
living, etc) Expat
Required No.
Position
Responsibilities
Analysis of chronic problems related to plant equipments, suggest solutions to overcome problems and
implement the recommendations.
Conduct site study, prepare layouts and cost estimate for each project proposal.
Set up work control to ensure proper execution of approved plan and design construction methods, procedures,
specifications, quality, cost and safety.
Perform electrical engineering design for 13KV, 6.6 KV and 480 V power distribution system and related
engineering calculations including cable sizing.
ARKAN
Develop hook up and interface diagrams for new equipments and instruments.
Budget preparation for capital expenditure projects with justification on investment and budget presentation to
the engineering chief engineer.
Follow up with suppliers and technical interactions with suppliers; arrange site visits, interaction with plant
people.
Analyze spare parts that are failing frequently and take required countermeasures while ordering including
revise technical specification, modify design, insist for better quality
Plan various activities for the implementation of the project including preparatory jobs and shutdown jobs.
Ensure compliance to all relevant safety, quality and environmental management policies, procedures and
controls across the EPM section to guarantee employees safety, legislative compliance, delivery of high quality
products/services and responsible in environmental attitude.
Years of
Experience(s)
Level of
Education(s)
Required Skills/
Competencies
Through knowledge of various electrical equipments, basic design and operating principles.
Must have ability to reconstruct the contract documents for given project.
Ability to analyze the electrical construction drawings layout drawings and to optimize where ever applicable.
Must be able to extract the required help and cooperation from plant people for the smooth completion of
projects.
Should be well aware with latest technical developments, references and case studies.
Salary for
position
Required No.
ARKAN
Position
Mechanical Engineer
Responsibilities
Execute and manage all mechanical maintenance working orders.
Initiate and review internal and external purchasing orders related to mechanical maintenance.
Follow-up the execution of programmed maintenance works, organizes plans and programs for
both preventive maintenance and annual plans for spare parts and follows up the quality and
time frame of implementation.
Checks on the tools and equipment to verify the safety of parts, equipment within the
departments scope of responsibility, raises relevant reports about them to the Mechanical
Maintenance Head to fulfill his instructions in this regards.
Participates in performing breakdown maintenance.
Ensure safe work conditions for mechanical maintenance procedures.
Controls the maintenance works and verify the execution according to standards.
To measure and analyses the efficiency of the maintenance works performed and to submit
report to Head of Maintenance.
To conduct studies to enhance and optimize equipment performance.
To maximize operational availability of all equipment with respect to customer demands.
Coordinates with relevant vendors to ensure timely delivery and quality standards.
Supervise the execution of maintenance projects within the time and cost basis set.
ARKAN
Participate in maintenance budget preparation and ensure budgetary control.
Manages the performance of relevant team members (supervisors and technicians), train them,
and evaluates their performance in accordance with their Job Profiles KPIs set.
Performs any other assignments and tasks related to the business needs of the business unit.
Years of
Experience(s)
5-7 years of experience in same job in similar industrial works familiar with kiln 10000 ton and
vertical cement mill
Level of
Education(s)
Required Skills/
Competencies
Salary for
position
AED 11,500 to 15,600 per month all included (accommodation, transportation, basic,
living, etc) expat
Required No.
ARKAN
Position
CCR Operator
Ensure that safety of equipment's & employees, quality & cost related issues are under control.
Report immediately any abnormal situation.
To provide concise shift reports and handovers to ensure continued smooth operation.
Responsibility for ensuring that the operation of the Kiln Raw Milling and Cement Milling
systems remains within the environmental operating limits.
Prepare for operation, start up and shut down cement mills processes, start up and shut down
burning and milling processes, monitor and optimize operations.
Responsibilities
Operating the Plant to the process and quality parameters set by the production and quality
department and providing precise and clear log reports for shift handover and day shift
departments as set out.
Monitoring KPIs and optimizing the process within the parameters set.
Working in conjunction with the shift laboratory staff to monitor, and maintain process remains
within targets.
Informing shift supervisor of and deviations from process or quality targets implementing
defined corrective actions.
Assessing any faults through the DCS system contacting shift support teams directly or through
shift supervisor depending criticality and availability.
Attend and actively participate in daily operations meeting to assess the previous 24 hour
performance.
Undertake regular training to enhance skills and increase flexibility to operate all areas of the
process.
Responsible for ensuring good housekeeping with the working area.
Support the quality department in the collection preparation and testing of samples as and
when required within scope of training given.
Take part in cross functional route cause analysis meetings for plant problems or failures.
Coach and support trainees as and when required.
Provide sickness and absence cover when required and be prepared to work additional hours.
Years of
Experience(s)
Level of
Education(s)
5-7 years of experience in DCS system ABB or Siemens, Cement manufacturing process, Clinker
& cement Quality parameters. Familiar with 10000 Ton clinker.
BSc or Diploma in Chemical Engineering
IT literate
Strong problem solving skills
Ability to work well within a small team.
Required Skills/
Competencies
Salary for
position
AED 7,400 to 10,000 per month all included (accommodation, transportation, basic,
living, etc) Expat
ARKAN
Required No.
Position
Inspector Electrical
Responsibilities
Years of
Experience(s)
Level of
Education(s)
Required Skills/
Competencies
Perform troubleshooting and repair of electrical equipment and allied electrical devices
that may arise during the shift and prepare the necessary shift report.
Perform maintenance work on motor, switchgear, transformer, breaker, switches to
ensure reliability of electrical equipment.
Perform repair, servicing or replacement of electrical component for malfunctioning
electrical equipment and devices.
Perform housekeeping after any maintenance work for a safe, clean environment.
Perform checking of LUX and replacement of defective lighting
Assist the instrumentation department in rectifying problem
Prepare Work Request using the Maintenance Package Software
ARKAN
Salary for
position
Required No.
Position
Inspector Mechanical
Responsibilities
ARKAN
Years of
Experience(s)
Level of
Education(s)
Required Skills/
Competencies
Is responsible for maintaining tools and tackles in the right quantity and in good
working conditions and uses them properly.
Should be prepared to work in both general shift and shifts as directed and as
per the requirement of the company.
Should be ready to work additional hours, if a need arises, according to the
overtime rules of the company.
Should be willing to take up any other incidental job allocated to him as and
when required by the organisation.
Salary for
position
Required No.
Position
Mechanical Technician
Responsibilities
Ensure good working conditions and safety standards are maintained within all areas of
maintenance operations.
Ensuring the permit to work system and any other safety system (Hot Work, Confined Space,
ARKAN
Work at Height, lifting, slinging and rigging, etc) are strictly adhered to.
Assess risks, carryout Risk Analysis and plan corrective actions as and when required.
Should take responsibility for self and co- workers to strictly adhere to the policies, procedures
and instructions set for the organization.
Ensure good housekeeping and ensuring that on completion of work the work area is returned in
a high standard of cleanliness and all safety protection has been inspected and returned to the
required standard.
Is responsible for carrying out maintenance of all mechanical machinery allocated to him with
good quality and respecting the time schedule.
Is responsible for carrying out, the maintenance to the accuracy and by the method statements
produced by the Inspectors and Planners on time.
Is responsible for constantly up-dating his superior on work progress and result of defects
observed, inspection carried out pertaining to his field of operation and should be in a position
to locate and organize spares in the absence of the superior.
Able to inspect all spares required for a task and inform superior and stores personnel of any
defect or damage to spares or lack of availability.
Is responsible for maintaining tools and tackles in the right quantity and in good working
conditions and uses them properly.
Prepared to work in both general shift and shifts as directed and as per the requirement of the
company.
Willing to take up any duties/job allocated to them for which they have the skill, experience or
ability to carry out safely.
Should be able to work with equipment of fabrication in the workshop to produce spares
requested by superior.
Responsible for assisting The Execution Engineer in filling and updating the scheduling package.
Undertake all training required to full fill required duties and improve individual skill sets.
Maintain department records as required.
Performs any other assignments and tasks related to the business needs of the business unit or
as per management direction.
Years of
Experience(s)
7 years of experience in the same field for the vocational training certificate holder and 3years
for the mechanical engineering diploma holder
Level of
Education(s)
ARKAN
Salary for
position
AED 5,600 to 7,600 per month all included (accommodation, transportation, basic,
living, etc)Expat
Required No.
12
Position
Responsibilities
Receive report from previous shift
Prepare inspection and follow up report
Field tour in his specific area to conduct inspection and fell in the check list
Make necessary corrective actions of 1st level maintenance nature
Give and receive feedback from the Operators and Shift Leaders.
Coordinate and facilitate all activities on the lines during daily operation
Prepare equipment before and after restart
Prepare equipment's for maintenance activities during shutdown
Participate in root cause analysis
ARKAN
Participate in refractory work during shutdown
Ensure safety rules and procedures implementation during the shift.
Ensure good level of housekeeping in his area.
Follow Up all comments mentioned in the report.
Years of
Experience(s)
Level of
Education(s)
Salary for
position
AED 4,300 to 5,800 per month all included (accommodation, transportation, basic,
living, etc) Expat
Required No.
22
ARKAN
Position
Responsibilities
Years of
Experience(s)
Level of
Education(s)
Required Skills/
Competencies
Safety oriented
Salary for
position
AED 4,313 to 5,800 per month all included (accommodation, transportation, basic,
living, etc) Expat
Required No.
10
ARKAN
Position
Lubricator
1.
2.
Responsibilities
Years of
Experience(s)
Level of
Education(s)
High School.
Required Skills/
Competencies
Salary
ARKAN
Required No.