Академический Документы
Профессиональный Документы
Культура Документы
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]
Chameleon bootloader
I can't say enough great things about the Chameleon bootloader. One thing that I had some
trouble finding at first was any documentation to accompany it. A lot of valuable information is
supplied in the Doc folder if you download the source code of Chameleon RC3. Mostly it tells
users how to set boot flags and advanced startup options to enable different functionality.
You can use these options from the Chameleon bootloader itself when starting up your
machine. Stop the Chameleon countdown and type the command at the boot prompt. If you
want any of the options to be selected by default, you must enter them into your
com.apple.boot.plist- in your /Extra folder. Simply drag this file to the desktop, open and edit in
TextEdit, then drag back to /Extra.
The following text is taken from the Chameleon documentation provided in the source folder
available onhttp://chameleon.osx86.hu/ I edited and clarified where necessary.
The boot: prompt waits for you to type advanced startup options. If you don't type anything, the
computer continues starting up normally. It uses the kernel and configuration files on the
startup device, which it also uses as the root device.
Advanced startup options use the following syntax:
[device] [arguments]