Академический Документы
Профессиональный Документы
Культура Документы
GE imagination at work
Table of contents
Economic solutions
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Tapered wellhead systems . . . . . . . . . . . . . . . . . . . . . .6
FC wellhead systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Conventional wellhead systems . . . . . . . . . . . . . . . . 10
Time-saving solutions
Flow-control solutions
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Multibowl wellhead systems . . . . . . . . . . . . . . . . . . . . 14
Quick Connect System (QCS) . . . . . . . . . . . . . . . . . . . . 15
NT-2 wellhead connector . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Sliploc wellhead connector . . . . . . . . . . . . . . . . . . . . 17
VG-loc wellhead connector . . . . . . . . . . . . . . . . . . . . 17
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
VG-M Expanda-Seal gate valve . . . . . . . . . . . . . . . . . 30
VG-200 gate valve . . . . . . . . . . . . . . . . . . . . . . . . . .31
VG-300 gate valve . . . . . . . . . . . . . . . . . . . . . . . 32
Model D gate valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SR-CT2 gate valve . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
CH hydraulic actuator . . . . . . . . . . . . . . . . . . . . . . 36
Technical solutions
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
HP/HT drilling and completion systems . . . . . . . . . . . . . . 20
Close-Proximity Wellhead (CPW) systems . . . . . . . . . . . . 21
Jackup drilling systems . . . . . . . . . . . . . . . . . . . . 22
Corporate overview . . . . . . . . . . . . . . . . . . . . 38
Economic solutions
Economic solutions
Economic solutions
Tapered wellhead systems
TUBING
BONNETS
SECONDARY
SEALS/
PACKOFFS
TUBING
HANGERS
TUBING
HEADS
PACKOFFS/
SLIPS
CASING
HEADS
Tapered configuration
Material trim AA to EE
Elastomeric seals
Economic solutions
FC wellhead systems
Economic solutions
FC wellhead systems
TUBING
BONNETS
TUBING
HANGERS/
COUPLING
TUBING
HEADS
SECONDARY
PACKOFFS
PRIMARY
PACKOFFS
CASING
HANGERS
CASING
SPOOLS
SECONDARY
PACKOFFS
PRIMARY
PACKOFFS
CASING
HANGERS
CASING
HEADS
PR2 qualified
Economic solutions
Economic solutions
Conventional wellhead systems
TUBING
HEAD
ADAPTERS
TUBING
HANGERS/
COUPLING
TUBING
HEADS
3. D15
Utilized with metal-to-metal sealing designs when
the pressure and capacity ratings of the CWCT
are exceeded
CASING
SEALS
CASING
HANGERS
CASING
SPOOLS
CASING
SEALS
CASING
HANGERS
10
CASING
HEADS
11
Time-saving solutions
12
13
Time-saving solutions
Multibowl wellhead systems
14
Time-saving solutions
Enhanced safety
PR2 rated
Elastomeric sealing
PSL 1-3
15
Time-saving solutions
NT-2 wellhead connector
The VetcoGraySliploc connector is used with modern highperformance systems to provide a quick, permanent casinghead connection
over field-cut conductor casing. It utilizes set screws to
actuate the slip-style connection fixing the casing head to
the conductor. The adaptable Sliploc connector allows for
elastomer sealing or metal-to-metal sealing.
16
Time-saving solutions
Low torque
Self-aligning
Sizes 9 5/8 to 30
17
Technical solutions
18
19
Technical solutions
Technical solutions
20
21
Technical solutions
Technical solutions
GE Oil & Gas has extensive capabilities for all TLP and SPAR
drilling and completion needs. Our proven systems help bring
deepwater reservoirs online reliably and cost effectively.
The use of an adjustable drilling riser allows casing stretch,
while compact wellheads and block-style trees enable a
smaller and safer work area. The option to use NT-2 style
connections and metal-to-metal seals can provide rapid
make-up times with reliable, long-life sealing.
22
23
Technical solutions
Horizontal Tree (HT) systems
VetcoGray horizontal tree technology allows complete access
to the well bore without the need to remove a conventional
vertical tree. The well is produced through the side of the
tubing hanger, flowing out through the master valve. Our HT
systems are ideal for wells that may require frequent downhole completion recovery, or where there are limited height
requirements.
Our HT systems provide an economic solution in natural-flow
well applications, since they do not require a conventional
riser/workover system. With our proven all-metal seals,
VetcoGray HT horizontal trees are suitable in every type
of reservoir condition, from low-pressure submersible
pump applications to natural-drive high-pressure/hightemperature gas fields.
24
Technical solutions
Electric Submersible Pump (ESP)
completions
GE Oil & Gas has a long history of completions interfacing
with electric feed-through mandrels for ESPs from a variety
of manufacturers. All of our major product lines can be
configured to fit your ESP completion requirements. Our
equipment is designed to have minimal configuration impact
on the wellhead system and drilling operations. Only the
completion equipment (tubing hanger and tubing head
adapter) are modified to incorporate the feed-through mandrel.
ESP completion equipment can be configured to use flanged
connections, NT-2 connection or multibowl wellheads.
Reliable designs
Simple installation
25
Technical solutions
Technical solutions
SAGD Producer
SAGD Injector
26
27
Flow-control solutions
28
29
Flow-control solutions
Flow-control solutions
VG-200:
VG-231:
30
Ultra low-torque
One-piece gate
31
Flow-control solutions
VG-300 gate valve
The VetcoGray 300-series includes high-performance
valves for pressures ranging from 5,000 to 15,000 psi.
These valves are downstream-sealing, which minimizes the
operating forces required and ensures fail-safe operation
when used as an actuated valve. VG-300 valves are very
well established in the industry and are used in every key
region of the world. A split-gate design is also available.
Flow-control solutions
Model D gate valve
VG-300:
32
Sizes 1 13/16 to 11
Qualified to API 6FC fire rating
Non-elastomer stem packing
Multi-purpose injection fitting: stem packing sealant or
body lubrication
Manual or actuated; compatible with VetcoGray actuators
or those of other leading manufacturers
No body penetrations, grease port located above
stem backseat
Non-rising stem
Metal-to-metal sealing
Certified to PR2, Appendix F, -75F to 350F
Split gate design
33
Flow-control solutions
Flow-control solutions
Chokes
Adjustable chokes
We supply a wide range of adjustable choke products, all
with a position indicator sleeve and a lock screw to fix the
stem at the desired orifice size. The flow area between the
stem tip and the orifice may also be adjusted by rotating
the stem. There are five different models of chokes available
in this category depending on the type of inlet and outlet
connection, pressure rating and bean.
Metal-to-metal seal
34
35
Flow-control solutions
CH hydraulic actuator
The CH actuator fully complements all the VetcoGray
gate valve lines along with a broad range of valve sizes
and pressure ratings, for maximum application coverage.
It is a hydraulic fail-safe actuator designed for surface
applications, with many features based on our OP (general
subsea applications) and OPCH (deepwater applications)
actuator technology, which has been used successfully in
subsea applications since 1985.
CH-CTS hydraulic actuator
This variant of our CH line is designed to shear coil tubing,
a process requiring a large amount of closing force
that cannot be delivered by the actuator springs alone.
Therefore, the spring chamber is designed as a pressure
vessel so it can be pressurized with the hydraulic supply.
An additional benefit of this design is that this reservoir
can also be used as a quick-dump reservoir enabling
significant reductions in actuator closing times during
normal operation.
Specifications
Successfully completed the performance verification
procedures of API 6A Appendix F, latest edition
Manufactured to latest API 6A
Performance tested and certified to API 6A PR2 and
API 6AV1 (SSV)
Manufactured to API 6A surface safety valve actuator
specifications
Available supplied to NAS 1638 Class 6
Accessories
Selective back seat option
Fail-safe eutectic lock-out option
Electrical position indicator
Hydraulic override
Rotary override
36
37
Corporate overview
Breadth and depth
GE Oil & Gas has been developing industry-leading solutions
for more than a century. Our specialty systems enable superior
performance around the globe in harsh environments on
land, offshore and subsea. As the oil and gas industry matures,
we provide the knowledge and technologies to take drilling,
completion and production further and deeper than they
have ever gone.
Onshore
Surface wells are drilled and completed in every kind of
environment from desert sand to arctic snow. We provide
expertise and equipment for them all. Our experience
covers production of oil, gas and combinations with other
products such as water, CO2 or H2S. Our products and
services span the entire range of applications, whether for
simple low-pressure oil wells or the extreme high-pressure/
high-temperature wells now being developed worldwide.
Corporate overview
Strength and stability
Offshore
Offshore facilities are becoming more diversified as a result
of vast differences in water depths and field characteristics.
We offer an extensive portfolio of proven systems and products
including fixed platforms, jackups and MODUs, TLP/SPARs
and FPSOs, and we frequently partner with our customers
in offshore field development and exploitation providing a
full range of industry-leading technologies from drilling and
compression equipment to power-generation modules.
Subsea
With offshore development moving into deeper waters and
marginal fields, more advanced technologies are needed
to increase reliability, flexibility, speed and performance.
Our subsea wellheads and connectors have provided
solid foundations for more than 40 years. We are also at
the forefront of subsea field development, with advanced
systems installed worldwide. Our portfolio also includes
the industrys latest and most advanced trees, production
controls, manifolds and connections, processing and
distribution systems.
One source,
many solutions
GE Oil & Gas customers benefit from the broad strategic and
financial stability that enables strong, long-term investment
in and development of new technologies, tools, services and
human resources.
Investment
Our entire organization is committed to investing significant
time and resources in order to deliver greater advantages
to our customers. We invest in new technologies by
researching, developing and testing extensively to
ensure that only the best solutions go to market. We also
invest in regional economies by spreading our research,
manufacturing and service facilities around the world. And,
with our ecomagination program, we invest in the future
of the planet overall creating solutions that are better for
business and the environment.
Knowledge
Our oil and gas customers are in a unique position to
benefit, not only from our advancements in this industry,
but also from the products and services proven by other
high-tech parts of our organization. Technologies are
regularly modified and injected from our Aviation, Energy,
Healthcare and other businesses to improve machine
performance in oil and gas applications. We also work
very closely with key customer engineering teams, looking
beyond current projects and focusing on future needs.
In our New Technology Introduction (NTI) program, for
example, we meet with customers every quarter for the
sole purpose of brainstorming new ideas pooling human
and financial resources; sharing responsibilities, risks and
rewards.
Training
In addition to extensive and demanding training requirements
for our own personnel, we provide a variety of specialized
programs for our customers. Courses range from two-week
modules to a six-month Certificate in Oil & Gas Technologies.
Training methods and course documentation is tailored to
each customers specific needs and equipment. We also
provide, multi-customer sessions, computer-based training
and can accommodate programs at customer sites, at our
regional facilities or at our main Learning Center in Florence.
Service
We provide leading inspection, maintenance, repair, spare
parts and upgrade services for every part of an operation, in
every sector of the industry and every region of the world.
GE Oil & Gas has 11 dedicated Global Services centers and
more than 80 manufacturing, sales and service facilities
worldwide. Our crews perform extensive on site support,
plus ongoing design, engineering and a range of remote
monitoring and diagnostic solutions that help prolong
equipment life, reduce costs, and improve performance.
Commitment
Whether they are in drilling and completion, production,
transportation, refining, processing or petrochemicals we
are fully committed to helping all our customers achieve
greater levels of performance and productivity.
On land
and at sea
38
39
ge.com/oilandgas
Global Headquarters
Via Felice Matteucci, 2
50127 Florence, Italy
T +39 055 423 211
F +39 055 423 2800
customer.service.center@ge.com
Nuovo Pignone S.p.A.
GE imagination at work
GEOG_VG_Surface_Drilling_HYBRID_042409