Академический Документы
Профессиональный Документы
Культура Документы
Bedienungsanleitung
Instruction Leaflet
KK-Matchgewehre
Small Bore Target Rifles
Mod. 64 R . 64 R L
~
j-
-J:tft 1
r -
,
~~~~
..; . : -i -.4.
j
~
Bitte sorgfCiltig lesen, bevor Sie
dieses Gewehr zusammenbauen
oder benutzen.
Please read carefully before you
assemble or operate this rifle.
~
DIE MEISTER MACHER
Index
Preface . p.16
Safety instructions . p.16
General handling of rifles. . p.17
Ear and eye protection. . p.19
Laws . p.19
product relating safety instructions. . p.19
Liability . p.19
Technical data p.20
Assemb~,fi~ingtheANSCH01Z barreledadion . p.20
Cocking, loading and safety operation. . p.2l
Unloading. . p.2l
Magazine. . p.2l
Trigger . p.22
~
Order-n umbers p.2 5
Cleaning, care, maintenance, lubrication.. p.26
Accessories. . p.27
Warranty... . p.27
Copyright . p.27
Drawings / Spare parts. .. p.28
Warranty card. . p.39
DIE MEISTER MACHER
Preface with ammunition. Always remember the
sequence of disassembly. Should you still
have problems with the safe usage and
Dear Friends of ANSCHUTZ, correct handling of your rifle or should you
You have made a good choice, now that have additional questions, please do not
you have decided to buy an ANSCHUTZ hesitate to contact a competent gunsmith
product. The many great results obtained or dealer or address our factory directly.
with ANSCHUTZ rifles by target shooters, This instruction leaflet is extraordinarily
participants in the Olympic Games as well important. Make sure that it is always with
as in World and European championships the rifle especially when it is sold, lent or
throughout the world made your choice otherwise given to a third person. Our
easy, as your rifle has benefited from our products are exclusively meant for target
great experience of making fine sporting shooting. Their use is subject to the "Gene-
and target rifles since 1856. World-wide, ral Technical Rules" for all target shooting
ANSCHUTZ rifles are respected because disciplines of the INTERNATIONAL
of their fine accuracy, impeccable design SHOOTING SPORT FEDERATION (ISSF),
and immaculate workmanship. Should you Bavariaring 21, 80336 Munchen,
still be unaware, they include: Germany or to the rules of the INTERNA-
TIONAL BIATHLON UNION,
The famous ANSCHUTZ small bore target Airportcenter, Postbox 1, A-5073 Wal5-
rifles, air rifles and air pistols; small bore Himmelreich, Austria.
biathlon rifles and repeater summer Additional copies of this booklet can be
biathlon air rifles; hunting rifles and ordered.
shotguns in diverse calibers, small bore sin-
gle loaders and repeaters, Flobert rifles, This ANSCHUTZ firearm has been
silhouette pistols, silhouette rifles and carefully test fired and inspected before
Varmint rifles. shipment from the factory. The mechanism
of this firearm has been properly designed,
tested and fitted with the utmost attention
to safety. However, any mechanical device
Safety instructions can fail and no such device can prevent
accidents caused by carelessness or
thoughtless handling. ANSCHUTZ cannot
.&. Attention: control the handling of each firearm once
they leave the factory. Please take the time
Please read carefully the following articles to inspect the firearm carefully before use.
before using this rifle. It is extremely
important that you become thoroughly DO NOT USE ANY FIREARM WITHOUT
familiar with this rifle and its operating A COMPLETE UNDERSTANDING OF IT'S
characteristics by carefully reading and SAFE USE AND PROPER HANDLING
understanding the instructions in this CHARACTERISTI CS.
booklet before you attempt any use of it
16
G Warning: Please note:
There is no substitute for personal
This rifle can be dangerous if it is not used responsibility and common sense in the
correctly or if this instruction leaflet is not handling, use and storage of firearms.
observed. The privilege of ownership and Securely store your unloaded guns away
safe use of your rifle carries a personal from access by children or unauthorized
responsibility that no one should take adults.
lightly. Rifle accidents would not occur if
the following rules of shooting safety were
observed.
General handling of rifles
1. Treat every rifle as though it was loa-
The Ten Commandments of Firearms ded. Do not take anyone's word or
Safety automatically assume it is not loaded.
. Always
direction.
keep the muzzle pointed in a safe
leave the bolt open so that they can easily
see that the rifle cannot be fired. Make sure
that the rifle is not loaded when you stop
. Firearms should
in use.
be unloaded when not
shooting. Make sure your rifle is unloaded
before every transport.
rifle with your finger
Never pick up your
on the trigger or the
. Avoid alcoholic
when shooting
beverages
or handling
or drugs
a gun.
the vicinity of your target.
sure of a safe backstop
fire at a hard, smooth
Be absolutely
and target. Never
surface or water.
17
Never shoot at a skyline target or into the and especially when you are not present
air. Do not shoot at anything from which a your rifle is well secured, out of any reach
bullet may ricochet. Never fire your rifle of children, careless adults and other
with the muzzle in the water or against any unauthorised persons and in no way
other material to avoid an accident or accessible to them. Never place any
damage of your rifle. firearm in such a manner that it may be
dislodged. For the safe storage of your rifle
4. Be sure that you use the correct am- even in a locked cabinet or safe the use of
munition. The correct calibre can be seen an additional trigger lock is recommended.
on your rifle. Load your rifle only when you Only give your rifle to authorised persons.
are at the range and ready to shoot. Use Never let your rifle be used by anyone who
only genuine ANSCHUTZ magazines. Do is not familiar with the safe handling of a
not exceed the stated magazine capacity. rifle and these instructions. This rifle must
Alterations to the rifle or the use of non- only be used by a responsible adult or
ANSCHUTZ magazines and accessories under his or her supervision.
may cause malfunctions.
9. Watch for any change in the operation
5. Always keep your rifle clean. Be sure of your rifle which might impair its safety. If
the bore is not obstructed by dirt, water, you suspect or note a defect or malfunction,
grease or any other foreign materials. stop using it immediately, unload the rifle,
Never try to shoot out any obstruction. make sure that it is not under pressure and
send it to a competent gunsmith, the factory
6.Serious injury and damage can result or its recommended repair station for
from the use of the wrong ammunition, bore inspection. Note: Apart from normal
obstructions, or incorrect cartridge cleaning the rifle must only be disassembled
components. by an authorized gunsmith. Unqualified
handling or disassembly can cause injuries
7. Place the safety fully into or or irreparable damage of the rifle.
"S" "F"
position - never inbetween. Always keep
safety in full "safe" position until ready to 10. Your rifle should always be handled with
fire. Do not put your finger on the trigger extreme care. Make sure that it is never
when operating the safety or whenever you dropped or placed in such a way that it can
are not ready to shoot. fall. Fortransport purposes your rifle should
be dry and clean. We recommend an
8. When not in use your rifle should be approved protective and lockable gun case.
stored in a locked and secure place
accessible only to you. Check first to make 11. You must be in good physical condition
sure it is unloaded. Store the rifle with and mental health and not under the
uncocked trigger. Store ammunition in a influence of any substance (drugs, alcohol)
separate and secure place. It is your special which might impair vision, dexterity or
responsibility to make sure that at all times judgement. Do not use your rifle when you
18
are tired. Tiredness may result in a loss of bolt or leave it open at least. In the case of
control. a repeater remove the magazine as well.
Make sure there is no cartridge left in the
12. Clean your hands carefully after chamber.
shooting and cleaning your ANSCHUTZ
product. Residues of bullets, powder or oil 2. Make sure there is nobody in the area
might impair the health of your skin. of case ejection.
13. Your ANSCHUTZ rifle has been 3.lfyou store the rifle remove the bolt and
carefully built and inspected by skilled store the bolt uncocked in a separate place.
technicians to provide maximum efficiency.
The service life depends on the owner's Important note for the handling of
care and on cleaning following this ammunition:
instruction leaflet.
1. Exclusively use clean, factory loaded
and new ammunition in the caliber
approved for your rifle.
Ear and eye protection
2. Be aware that the range of a bullet
You and other persons should always use starting from cal. .22 I.r. might be 1.6 km
approved hearing protection and or even longer. Therefore also be sure of
approved shatterproof eye protection while the safety of the impact area.
shooting.
Liability
Laws
1. ANSCHUTZ does not assume any
When using a firearm observe the corres- responsibility or payment of damage claims
ponding regulations and laws for the use for damages of any kind resulting from the
of firearms in your country. disregard of these instructions, non-
qualified treatment or repair, the use of non-
original ANSCHUTZ spare parts, incorrect
handling, negligence, removal of the knot
Product relating safety varnish or unauthorized modifications.
instructions
2. The stock of this rifle has been very care-
Important note for the handling of fully checked by factory inspectors prior
rifles: to shipment and has been determined to
be free of defects. Certain kinds of abuse,
1. Unload your rifle immediately if you do such as dropping of the rifle can cause
not intend to continue shooting. Remove the damage to the stock for which the owner
19
is solely responsible. We also assume no Assembly, fitting the
responsibility for defects resulting from
inappropriate transportation (mail,
ANSCHUTZ barreled action
forwarding agency, plane, etc.). Please The stock, the barreled action and the bolt
immediately contact your transporter in are packed separately for shipment and
such a case. need to be assembled. However, do not
do this until you have followed all the
3. Changes or alterations to this rifle or any procedures listed below.
of its parts are prohibited. Such changes
or alterations can significantly impair the
- Wipe away excess oil from the barreled
safe use of our product and can lead to action and the bolt.
accidents involving severe or even fatal
bodily injuries. Any product warranty will
- Cock the bolt by turning the guide bolt
automatically lapse in case changes or and the bolt handle opposite to each other.
alterations are implemented. Users are
requested to carefully inspect the product
-Insert the bolt by actuated trigger.
with regard to possible changes and
alterations before use. In case of doubt you
- Remove the magazine from the
should contact us for further information. magazine well.
20
After assembly for the first time settlements Unloading
of the stock wood may occur.
Consequently we suggest that you tighten For safety reasons the rifle must
the screws once more in the manner immediately be unloaded if you intend to
described after some time. Check the the stop shooting. Unlock and open the bolt.
screws before every shooting. This will eject the cartridge. Please also see
safety instructions for the handling of rifles
and pistols.
.
Push the cartridges with the head first into
to the stop.
Now push the bolt forward
breech. A cartridge
to close the
from the magazine
. the magazine.
Push the magazine
well
into the magazine
until you hear that the magazine
is fed into the chamber of the barrel.
Now push the bolt handle completely
downwards. The bolt is now cocked, the
. holder has caught the magazine.
Now open the bolt completely, push it
the bolt again and eject the empty case. for shooting.
The rifle is
. the
"F"
(fire) is covered
ready for shooting when the
visible but the
"F"
(fire) is
(safe) is covered.
"S"
21
2. Sear engagement
Important note:
.
Make sure your rifle is not loaded. Cock
your rifle and release the trigger. Check if
if you turn it to the right:
.
the trigger releases as desired.
trigger weight is increased (+)
if you turn it to the left:
The sear engagement is too long:
trigger weight is decreased (-)
There is a small distance between the
second stage and the release of the trigger.
Trigger weight and first stage weight
depend on each other with regard to the
mechanic mechanism. If one of them is 'Turn set screw No.1 counter-clockwise
after cocking and releasing (approxi-
changed there will always be a corres-
mately 1/8 turn each).
ponding change of the other as well.
22
. Repeat
the second
this process until you do not feel
stage anymore. Then turn
3. Malfundions of the trigger due to
wrong adjustment procedure
1/4 turn back to the right. Thus the
optimum sear engagement is adjusted. If the trigger is not adjusted correctly mal-
functions may occur, tampering with the
The sear engagement is too short: trigger adjustments will not result in any
There is no second stage. The trigger success. Therefore proceed as follows:
releases undefined without second stage. After every change the function of the
trigger must be checked. When the
'Turn set screw No.1 clockwise for at malfunction is removed check the desired
least 1/4 turn after cocking. Then release trigger values and adjust them again if
the trigger and check if there is a second necessary.
stage. If not, repeat this procedure until
engagement.
The trigger does not catch the cocking
Adjustment of the optimum sear piston or firing pin:
engagement
..
for assembled single stage
triggers with set screw No.1: . The first stage trigger is adjusted too
Cock the rifle.
Turn set screw No.1 (first stage) as long . tightly.
Turn set screw No.1 approx. 1-2 turns
4. Maintenance
to par. 2.
23
f) e 0
Adjustment of the trigger blade:
After loosening clamping screw No.3 the
trigger blade can be moved in longitudinal
direction.
Important note:
.&.Attention:
If you change the trigger remove the bolt
from the receiver when fitting the trigger
as otherwise the trigger will be damaged.
24
0
. Q)
Q)
m
m..Q) ..0" ..0 "'a
C C "'ac "'
Q)
CI)
....
0
....
'"
0
CI) fsrE
,800
0
Q) "'a c ..Q ~>-
Z Q)
0 0
- -i: J:
..
Q) "'a
0
"m ~m
Q)
.c.- 0.-0
.c",
.. '" .. ..
"'a
0 =CI)S
-g.- 'SCI)O)
"'a
..
0 ~m
0.-~.:: -.-
Q)m
m"
"'"
.-:) .c"
mQ) ~-Q)Q) >
E
..
0
E
"':J E -g
"'c
~E",.-
",-"CI)...
0 I- c"
U;
"'a
<C
.- > ~.... 0
1.1.
....
0
..... 0....
"'-g 0
.fot;
a.. E
700.6540
700.6541
1407-U9
1408-U1
.
.
150g
500g
.. 1407, 1407 Z, 1409, 1411 1959 - 1974
700.6550
5071/1 . 1009 .
700.6560 5071/1 D . 100g . 1974-1979
143655
to
700.6570 5075/1 . 550 9 . 1607, 1613, 1608 EDS
182155
700.6580 5075/1 D . 550 9 .
700.6600 5018 . 100g . 1807, 1907, 1807 Z, 1907 Z
700.6610 5018 L . 1009 . 1907 Silh., 1807 Rep.
700.6620 5018 D . 150g . 1907 Rep., 1907 Rep., 1912
New rifles up to 10,000 shots in 1,000 Protect your rifle against dust, sand,
shot intervals, subsequently in 5,000 shot humidity, heat and other harmful influences.
intervals at least. Vacuum clean your gun case or soft gun
26
possible humidity can escape. Adding a Copyright
humidity absorber reduces the develop-
ment of humidity. Be aware of other Product specifications, design and model
possible changes or damage. In such a changes are subject to change without
case take your rifle to an authorized prior notice. Dimensions and colors are
gunsmith for checking or send it to our subject to change. With reservation of
factory. misprints and errors. Goods are subject to
priorsale. Delivery subject to the presen-
To reduce the risk of damage in transit, we tation of the referring license for the
recommend the disassembly of the purchase of firearms.
barreled action from the stock.
ANSCHUTZ, the ANSCHUTZ logo and
the ANSCHUTZ logo in connection with
the slogan "Die Meister Macher" (also in
modified spelling) are protected brands of
Accessories
J.G. ANSCHUTZ GmbH & Co. KG, Ulm,
Please ask for our catalogue. Germany. The unauthorized use of this
brand name is not allowed and punishable.
27
««GARANTIE»»
Dieser Artikel wurde zum Verkauf freigegeben, nachdem er
selbst, seine Materialien und Einzelteile strenge Kanrallen
durchlaufen haben, ader das Gewehr beim Beschuss seine
Haltbarkeit und Funktian unter Beweis gestellt hat. Wir uber-
nehmen fur zwei Jahre valle Garantie auf Material- ader ~
Bearbeitungsfehler (ausgenammen Schaft- und Federbruche), ~
--0
safern ein Mangel nachweisbar bereits im Zeitpunkt der c: ......
Obergabe des Artikels varlag. Fur Mangel, die auf unsach- "E
...Q ~~
c:
gemaBe Behandlung ader auf Reparaturen zuruckzufuhren .Q u -==
0
sind, stehen wir nicht ein. Die Garantieleistung steht in unse- 'Q) cE~
rer Wahl in Nachbesserung ader Neulieferung. Schadens-
CD 0 Q) ::J
~~ '" --0
--0
ersatzanspruche - aus welchem Rechtsgrund auch immer ""
tij E ~ ~
geltend gemacht - sind ausgeschlassen. Wir bi~en, diese ~
Karte - van Ihrem Waffenfachgeschaft ausgefullt und unter-
-c::; ~ I
-'0 .-E
a
~e
schrieben - mit dem Artikel an uns einzusenden. L;: '~
(/)::>
ZZ
«tj
~
LUO-'0
>;;, Lij~
.1:
g'
0 2'
'"
c:
:J~
I.-
J.G. ANSCHUTZ GmbH & Co. KG . Jagd- und Sportwaffenfarbrik
0,--- ~Q) c:l0 --0 0 Q)
Postfach 1128. D-89001 Ulm/Germany. www.anschuetz-sport.com c:
i==;o 00 I-~ ::J"lJ
«Z 2;0 ~E QjO
~
«Q)
, ~--'- :JQ)'--- ~:=
c..c..
""0 E E
Q)
e ~~ ~o LU~ 0
DIEMEISTER MACHER LL tI) £:) £:) <!) I- li5t;
~
««GARANTIE»» ««W ARRANTY»»
Cet article n'a ete mis en vente qu'apres une verification After thraraugh testing af materials and finished parts this
minutieuse des pieces et matieres a taus les stades de 10 item has passed a rigid final inspectian as well as praaf
fabricatian au apr"s avair subi un cantr61e de fiabilite et testing ar test shaating. If, despite these precautians, there
de bon fonctionnementau bancd'epreuve. Nous 10 garan- is any failure due ta defective materials ar warkmanship
tissons pendant deux ans contre tout defaut de matiere au (except bracken stacks and springs) within twa years the
vice de fabricatian (sauf cantre les bris de crasse au de necessary repairs will be carried out without charge, in so
ressarts) dans la mesure au il peut iHre prauve qu'un defaut far as the item was evidently defective at the time af
existait deja au mament de I'achat de I'article. Naus ne purchase. Na claims under warranty can be accepted if
repandans pas des defauts resultant d'une utilisatian the item has been subjected ta impraper use ar unautharized
incorrecte au de reparations. Nous no us reservons d' exe- repair. The item will be either repaired ar replaced at aur
.
cuter 10 garantie so it par remise en etat soit par echange. discretian. Claims far campensatian - put farward far any
Lesdemandes en dammages-interiHs sant irrecevables quel- legal cause whatsaever - are excluded. This warranty card
Ie que sait la cause mise en avant. Veuillez faire remplir - campleted and stamped by yaur dealer - must be
et signer cette carte par votre armurier et no us I'adresser returned with the item far repairs.
avec I'article.
J.G. ANSCHUTZ GmbH & Co. KG . Jagd- und Sportwaffenfarbrik J.G. ANSCHUTZ GmbH & Co. KG . Jagd- und Sportwaffenlarbrik
Postfach1128. D-89001 Ulm/Germany. www.anschuetz-sport.com Postfach 1128 . D-8900l Ulm/Gel1Tlcny. www.anschuetz-sport.com
DIEMEISTERMACHER
~-------------------------------
Fabr.-Nr.:
Serial No.: ..........................................................................
Bitte hier eintragen . Please fill in here
~
D-89079 Ulm / GERMANY
PostFach11 28 §
D-89001 Ulm / GERMANY L{)
?:;-
TeleFon(++49)-(0)-731-4012-0 0
TeleFax(++49)-(0)-731-4012-700 "'-
0
anschuetz-sport.com
~
DIE MEISTER MACHER JGAl nFo@anschuetz-sport.com 0