Вы находитесь на странице: 1из 61

Part 3: Appendix 2: Attachment 1

Training Catalogue
GSM/GPRS/EDGE-Radio (TCI Personnel)

Tender 83/59

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

1/61

Table Of Content
1.

COURSE CHAIN DESCRIPTIONS ..................................................................................................... 3


1.1.
TRAINING OPTION: SERCOA, SERVICE RADIO COMMANDER OBR OPERATION / ADMINISTRATION ... 3
1.2.
TRAINING OPTION: SERCDT, SERVICE RADIO COMMANDER OBR DELTA TRAINING ......................... 7
1.3.
TRAINING OPTION: SESBSDT, SERVICE SBS DELTA TRAINING .................................................... 10
1.4.
TRAINING OPTION: SESBSOC, SERVICE SBS OPERATION, ADMINISTRATION AND MAINTENANCE /
COMMISSIONING ....................................................................................................................................... 13
1.5.
TRAINING OPTION: SESBSPE, SERVICE SBS PERFORMANCE ...................................................... 17
1.6.
TRAINING OPTION: SESBSPL, SERVICE SBS PLANNING............................................................... 21

2.

COURSE DESCRIPTIONS................................................................................................................ 24
2.1.
2.2.
2.3.
2.4.
2.5.
2.6.
2.7.
2.8.
2.9.
2.10.
2.11.
2.12.
2.13.
2.14.
2.15.
2.16.
2.17.
2.18.
2.19.
2.20.
2.21.

COURSE: TT5609, SOLARIS FOR USER/SYSTEM ADMINISTRATOR .................................................. 24


COURSE: TM2100, GSM INTRODUCTION ..................................................................................... 26
COURSE: TM2110, GPRS/EDGE INTRODUCTION ........................................................................ 28
COURSE: MN1783-10, RC OBR 7.0 OPERATION ......................................................................... 30
COURSE: MN1780-10, SBS BR 7.0 SYSTEM OVERVIEW ............................................................. 32
COURSE: MN1736-10, SBS BR 7.0 PERFORMANCE MEASUREMENT............................................. 34
COURSE: MN1786-10, RC OBR 7.0 SYSTEM ADMINISTRATION .................................................... 35
COURSE: MN2585-10, RC OBR 7.0 SYSTEM SPECIALIST ............................................................ 37
COURSE: MN1708-9, RC OBR 5.5->6.0 DELTA TRAINING ........................................................... 39
COURSE: MN1708-10, RC OBR 6.0->7.0 DELTA TRAINING NEW FEATURES ................................. 40
COURSE: MN1707-9, BSS BR 5.5->6.0 DELTA TRAINING ............................................................ 42
COURSE: MN1707-10, SBS BR 6.0->7.0 DELTA TRAINING NEW FEATURES ................................. 43
COURSE: MN1709-10, SBS BR 6.0->7.0 UPGRADE WORKSHOP .................................................. 45
COURSE: MN1782-10, SBS BR 7.0 OPERATION, ADMINISTRATION AND MAINTENANCE ................ 46
COURSE: MN1784-10, SBS BR 7.0 COMMISSIONING ................................................................... 49
COURSE: MN1888-10, SBS BR 7.0 SYSTEM SPECIALIST FOR GPRS/EDGE ................................. 51
COURSE: MN1788-10, SBS BR 7.0 SYSTEM SPECIALIST FOR GSM ............................................. 53
COURSE: MN1790, BSS RADIO NETWORK PLANNING AND OPTIMIZATION...................................... 56
COURSE: MN1736-10, SBS BR 7.0 PERFORMANCE MEASUREMENT............................................. 59
COURSE: MN1889-10, E-/GPRS BR 7.0 RADIO NETWORK PARAMETERS ..................................... 60
COURSE: MN1789-10, SBS BR 7.0 RADIO NETWORK PARAMETERS FOR GSM............................ 61

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

2/61

1. Course Chain Descriptions


1.1. Training Option: SERCOA, Service Radio Commander OBR
Operation / Administration
Target Group

The following curriculum will help you to identify your


training needs based on the different job profiles in the
Mobile Networks business. Depending on the particular
tasks you need to perform and on the depth of knowledge
you want to achieve, the following levels of training are
possible:
OAM Specialist for Radio Commander OBR
Commissioning Specialist for Radio Commander OBR
System administrator for Radio Commander OBR

Objectives

Upon completion of curriculum, participant will be able to:


operate, administer and maintain the Radio
Commander
Commission the Radio Commander according to the
installation test procedure manual.
perform advance database administration and systems
backups of the Radio Commander

Prerequisites

Basic knowledge in telecommunications - preferably also in


the Mobile Networks field is recommended, but not
compulsory.
All prerequisites are given in the curriculum and can be
considered as optional if equivalent knowledge was
obtained at an earlier point in time.
Content delivery can be combined with Web-Based
Training (the latter should be worked through prior to
classroom sessions).

Comment

Tender 83/59 Iran


Version: 1

If requested, all modules can be adapted to your specific


needs within certain pedagogical limits.

Copyright Siemens AG 2004


Confidential

3/61

OAM
Specialist

Commissioning
Specialist
System
Administrator

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

4/61

Respective courses:
TT5609, Solaris for
User/System
Administrator

In this course you will acquire the knowledge necessary to


administer a Solaris 2.x system. This is a prerequisite for the
subsequent Node Commander administration training. The
users and administrators part of Solaris is discussed. Network
relevant tasks such as the assignment and administration of
addresses, software installation procedures and the application
of the Shell Script are covered. Through extensive hands-on
training you will be well prepared for the subsequent courses.

TM2100, GSM
Introduction

The participant gets an overview on the GSM Transmission


Principle, Services, Network Architecture, Protocols &
Procedures, Radio Interface and Siemens GSM solution. This
course is the basic introduction into the "GSM world" and
prerequisite for all succeeding mobile communication courses,
e.g. GPRS; EDGE, UMTS, Introduction & Protocol Courses.

TM2110,
GPRS/EDGE
Introduction

The participant gets an overview on the GPRS principles,


advantages, network and protocol architecture, most important
procedures, radio transmission, GPRS enhancements by
EDGE and the Siemens GPRS solutions.

MN1783-10, RC OBR In this course you learn how to perform all OAM tasks via the
RC. This includes fault management, configuration
7.0 Operation
management, software management and management tasks
for measurements and tests. The user interface is explained
and individual management tasks are shown. Through
extensive practical exercises you learn how to perform all tasks
and procedures efficiently.
MN1780-10, SBS BR In this course you acquire a basic understanding of the SBS.
7.0 System Overview The architecture of the PLMN, the connections and the radio
interface are explained. The SBS is presented including the
architecture, the functions and the configurations. A more
detailed look to the BSC, the different BTSE and the TRAU
including architecture, functions and configurations completes
this overview.
MN2585-10, RC OBR In this course you learn how to configure and administrate the
7.0 System Specialist OMS-B. You will understand the tasks and the functions
including the functional units. The configuration and the
administration of the OMS-B database including the Q3
interface, x.25 connections, LAN configurations and access to
Oracle will be discussed and appropriate practical exercises

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

5/61

will be done. The application of K1103 and K1205 for tracing of


x.25, the backup of the system files, the detection of faults and
its elimination complete this practice oriented administration
course. Note: This course is not available before 10/99. The
duration is estimated to 7 days.
MN1786-10, RC OBR In this course you learn how carry out the RC commissioning.
7.0 System
After an introduction to the concept, the installation test
procedures are presented and discussed. You learn, how to
Administration
create and modify the database and how to perform
troubleshooting. The Network Editor is introduced and Backup /
Restore procedures are presented. Through extensive practical
exercises you become familiar with all installation test tasks
and procedures.

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

6/61

1.2. Training Option: SERCDT, Service Radio Commander OBR Delta Training
Target Group

The following curriculum will help you to identify your


training needs based on the different job profiles in the
Mobile Networks business. Depending on the particular
tasks you need to perform and on the depth of knowledge
you want to achieve, the following levels of training are
possible:
Operation Specialist and System Administrators who
have to work with the new version

Objectives

Upon completion of curriculum, participant will be able to:


Know the new feature set of Radio Commander and
carry out the relevant operation and maintenance task.

Prerequisites

OAM Specialist and System Administrator of previous


version.
All prerequisites are given in the curriculum and can be
considered as optional if equivalent knowledge was
obtained at an earlier point in time.

Comment

Tender 83/59 Iran


Version: 1

If requested, all modules can be adapted to your specific


needs within certain pedagogical limits.

Copyright Siemens AG 2004


Confidential

7/61

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

8/61

Respective courses:
MN1708-9, RC OBR
5.5->6.0 Delta
Training

In this course you learn how to perform O&M tasks and how to
carry out the commissioning of the new RC (OBR6.0). This
includes new features in the management of faults and tests,
configuration, software and performance measurement. After
an introduction to the new commissioning concept, the
supplemented installation test procedures are presented and
discussed. You learn, how to create and modify the database
and how to perform troubleshooting. Through extensive
practical exercises you learn how to perform all tasks and
procedures efficiently.

MN1708-10, RC OBR This course contains all important changes and improvements
6.0->7.0 Delta Training of the new Radio Commander version OBR7.0. Starting with
new hardware items, all OBR7.0/BR7.0 features will be
New Features
discussed. Also a brief survey of the changes in the OTS
application will be given. It will be delivered online via the
Synchronous Virtual University (SVU)

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

9/61

1.3. Training Option: SESBSDT, Service SBS Delta Training


Target Group

The following curriculum will help you to identify your


training needs based on the different job profiles in the
Mobile Networks business. Depending on the particular
tasks you need to perform and on the depth of knowledge
you want to achieve, the following levels of training are
possible:
OAM Specialist for SBS

Objectives

Upon completion of curriculum, participant will be able to:


Knows the new feature set of SBS and carry out the
relevant operation and maintenance task.

Prerequisites

OAM Specialist and System Administrator of previous


version.
All prerequisites are given in the curriculum and can be
considered as optional if equivalent knowledge was
obtained at an earlier point in time.

Comment

Tender 83/59 Iran


Version: 1

If requested, all modules can be adapted to your specific


needs within certain pedagogical limits.

Copyright Siemens AG 2004


Confidential

10/61

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

11/61

Respective courses:
MN1707-9, BSS BR
This is a delta course from BR5.5 to BR6.0. You will learn the
5.5->6.0 Delta Training differences between the two versions with an emphasis on
operation and maintenance topics. The new features are
explained. Please note that his course is targeted to operation
and maintenance personnel.
MN1707-10, SBS BR This is a delta course from BR6.0 to BR7.0. The new features
6.0->7.0 Delta Training and the new Hardware for BR7.0 are explained. You will learn
the differences between the two versions with an emphasis on
New Features
operation and maintenance topics.
MN1709-10, SBS BR
6.0->7.0 Upgrade
Workshop

Tender 83/59 Iran


Version: 1

This is a delta course from BR6.0 to BR7.0. The Upgrade


Procedures for LMT and SBS for BR7.0 are explained. Please
note that his course is targeted to personnel that is interested
in the details of the Upgrade.

Copyright Siemens AG 2004


Confidential

12/61

1.4. Training Option: SESBSOC, Service SBS Operation, Administration and


Maintenance / Commissioning
Target Group

The following curriculum will help you to identify your


training needs based on the different job profiles in the
Mobile Networks business. Depending on the particular
tasks you need to perform and on the depth of knowledge
you want to achieve, the following levels of training are
possible:
OAM Specialist for SBS
Commissioning Specialist for SBS
System Expert for SBS

Objectives

Upon completion of curriculum, participant will be able to:


operate, administer and maintain a SBS
commission the SBS according to the installation test
procedure manual
perform advance operation, administration and
maintenance task under consideration of SBS network
aspects

Prerequisites

Basic knowledge in telecommunications - preferably also in


the Mobile Networks field is recommended, but not
compulsory.
All prerequisites are given in the curriculum and can be
considered as optional if equivalent knowledge was
obtained at an earlier point in time.
Content delivery can be combined with Web-Based Training
(the latter should be worked through prior to classroom
sessions).

Comment

Tender 83/59 Iran


Version: 1

Field experience is recommendable prior to attend the


courses of the System Expert level
If requested, all modules can be adapted to your specific
needs within certain pedagogical limits.

Copyright Siemens AG 2004


Confidential

13/61

OAM
Specialist
Commissioning
Specialist

System Expert

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

14/61

Respective courses:
TM2100, GSM
Introduction

The participant gets an overview on the GSM Transmission


Principle, Services, Network Architecture, Protocols &
Procedures, Radio Interface and Siemens GSM solution. This
course is the basic introduction into the "GSM world" and
prerequisite for all succeeding mobile communication courses,
e.g. GPRS; EDGE, UMTS, Introduction & Protocol Courses.

TM2110,
GPRS/EDGE
Introduction

The participant gets an overview on the GPRS principles,


advantages, network and protocol architecture, most important
procedures, radio transmission, GPRS enhancements by
EDGE and the Siemens GPRS solutions.

MN1782-10, SBS BR In this course for operation, administration and maintenance


7.0 Operation,
you will be trained about procedures based on the system
Administration and
manuals for operation and maintenance. You will learn how to
operate the equipment, how to change the equipments
Maintenance
configurable data and how to maintain the equipment.
Through theoretical and practical exercises you will gain the
understanding of all your tasks and procedures.
MN1780-10, SBS BR In this course you acquire a basic understanding of the SBS.
7.0 System Overview The architecture of the PLMN, the connections and the radio
interface are explained. The SBS is presented including the
architecture, the functions and the configurations. A more
detailed look to the BSC, the different BTSE and the TRAU
including architecture, functions and configurations completes
this overview.
MN1784-10, SBS BR
7.0 Commissioning

The commissioning course focuses on all the procedures in


the installation and test manual. You will learn to carry out the
commissioning procedures for the network elements.
Extensive hands-on training during this course prepares you
for the commissioning job.

MN1888-10, SBS BR
7.0 System Specialist
for GPRS/Edge

The layers of the Gb air interface, the interface Abis and the
Gb interface are explained. GPRS related call flows are traced
and analyzed. The GPRS-related BSC database is discussed.

MN1788-10, SBS BR
7.0 System Specialist
for GSM

In this course you will acquire a more detailed knowledge of


saving of error symptoms and you will learn about further
possibilities of fault elimination. The layers 1, 2 and 3 of the air
interface Um, the interface Abis and the tasks of the CCS7 on
the A-interface are explained. The application of tracers like
K1103 and K1205 for capturing of data for further analysis is

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

15/61

included. The BSC database is discussed and you will


understand the parameters for cell selection, handover,
channel configuration, hierarchical cell structure, radio link
failure, overload handling and interference reduction. Through
practical exercises you will be familiar with all relevant
practices.

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

16/61

1.5. Training Option: SESBSPE, Service SBS Performance


Target Group

The following curriculum will help you to identify your


training needs based on the different job profiles in the
Mobile Networks business. Depending on the particular
tasks you need to perform and on the depth of knowledge
you want to achieve, the following levels of training are
possible:
Performance Expert for SBS

Objectives

Upon completion of curriculum, participant will be able to:


realize advance collection of SBS performance data.

Prerequisites

Basic knowledge in telecommunications - preferably also in


the Mobile Networks field is recommended, but not
compulsory.
All prerequisites are given in the curriculum and can be
considered as optional if equivalent knowledge was
obtained at an earlier point in time.
Content delivery can be combined with Web-Based
Training (the latter should be worked through prior to
classroom sessions).

Comment

Tender 83/59 Iran


Version: 1

If requested, all modules can be adapted to your specific


needs within certain pedagogical limits.

Copyright Siemens AG 2004


Confidential

17/61

Performance Expert

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

18/61

Respective courses:
MN1790, BSS Radio
Network Planning and
Optimization

This GSM radio planning course gives you all the detailed
knowledge of the radio network including all planning relevant
parameters. You learn about the planning methods, the mobile
radio propagation and the fading. Cell structures are discussed;
interference and frequency reuse is explained. The different
possibilities of network optimization are presented and the
application of relevant planning tools is shown. In practical
exercises you will verify your planning results.

TM2100, GSM
Introduction

The participant gets an overview on the GSM Transmission


Principle, Services, Network Architecture, Protocols &
Procedures, Radio Interface and Siemens GSM solution. This
course is the basic introduction into the "GSM world" and
prerequisite for all succeeding mobile communication courses,
e.g. GPRS; EDGE, UMTS, Introduction & Protocol Courses.

TM2110,
GPRS/EDGE
Introduction

The participant gets an overview on the GPRS principles,


advantages, network and protocol architecture, most important
procedures, radio transmission, GPRS enhancements by
EDGE and the Siemens GPRS solutions.

MN1780-10, SBS BR In this course you acquire a basic understanding of the SBS.
7.0 System Overview The architecture of the PLMN, the connections and the radio
interface are explained. The SBS is presented including the
architecture, the functions and the configurations. A more
detailed look to the BSC, the different BTSE and the TRAU
including architecture, functions and configurations completes
this overview.
MN1736-10, SBS BR
7.0 Performance
Measurement

In this course you will acquire the knowledge for the capturing
of performance data. The counters and counter groups are
explained and the objects to be monitored discussed. You learn
how to start the measurement jobs and how to capture data.
The captured data is forwarded for further evaluation.

MN1889-10, E-/GPRS This course gives you all the knowledge of the radio network
BR 7.0 Radio Network parameters changed for E-/GPRS.
Parameters
MN1789-10, SBS BR
7.0 Radio Network
Parameters for GSM

Tender 83/59 Iran


Version: 1

This course gives you all the knowledge of the radio network
parameters. You learn the basics of radio network planning, the
radio network including the cell structures. Radio channel
configuration and management, the cell parameters and the
algorithms for radio link control are explained. In practical
Copyright Siemens AG 2004
Confidential

19/61

training you will verify the planned parameters and perform


tuning as necessary.

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

20/61

1.6. Training Option: SESBSPL, Service SBS Planning


Target Group

The following curriculum will help you to identify your


training needs based on the different job profiles in the
Mobile Networks business. Depending on the particular
tasks you need to perform and on the depth of knowledge
you want to achieve, the following levels of training are
possible:
Planning Expert for SBS

Objectives

Upon completion of curriculum, participant will be able to:


perform mobile networks optimization
understand the parameters of the SBS and their mutual
influence

Prerequisites

Basic knowledge in telecommunications - preferably also in


the Mobile Networks field is recommended, but not
compulsory.
All prerequisites are given in the curriculum and can be
considered as optional if equivalent knowledge was
obtained at an earlier point in time.
Content delivery can be combined with Web-Based Training
(the latter should be worked through prior to classroom
sessions).

Comment

Tender 83/59 Iran


Version: 1

If requested, all modules can be adapted to your specific


needs within certain pedagogical limits.

Copyright Siemens AG 2004


Confidential

21/61

Planning Expert

Tender 83/59 Iran


Version: 1

Copyright Siemens AG 2004


Confidential

22/61

Respective courses:
MN1790, BSS Radio
Network Planning and
Optimization

This GSM radio planning course gives you all the detailed
knowledge of the radio network including all planning relevant
parameters. You learn about the planning methods, the mobile
radio propagation and the fading. Cell structures are discussed,
interference and frequency reuse is explained. The different
possibilities of network optimization are presented and the
application of relevant planning tools is shown. In practical
exercises you will verify your planning results.

TM2100, GSM
Introduction

The participant gets an overview on the GSM Transmission


Principle, Services, Network Architecture, Protocols &
Procedures, Radio Interface and Siemens GSM solution. This
course is the basic introduction into the "GSM world" and
prerequisite for all succeeding mobile communication courses,
e.g. GPRS; EDGE, UMTS, Introduction & Protocol Courses.

TM2110,
GPRS/EDGE
Introduction

The participant gets an overview on the GPRS principles,


advantages, network and protocol architecture, most important
procedures, radio transmission, GPRS enhancements by
EDGE and the Siemens GPRS solutions.

MN1780-10, SBS BR In this course you acquire a basic understanding of the SBS.
7.0 System Overview The architecture of the PLMN, the connections and the radio
interface are explained. The SBS is presented including the
architecture, the functions and the configurations. A more
detailed look to the BSC, the different BTSE and the TRAU
including architecture, functions and configurations completes
this overview.
MN1889-10, E-/GPRS This course gives you all the knowledge of the radio network
BR 7.0 Radio Network parameters changed for E-/GPRS.
Parameters
MN1789-10, SBS BR
7.0 Radio Network
Parameters for GSM

Tender 83/59 Iran


Version: 1

This course gives you all the knowledge of the radio network
parameters. You learn the basics of radio network planning, the
radio network including the cell structures. Radio channel
configuration and management, the cell parameters and the
algorithms for radio link control are explained. In practical
training you will verify the planned parameters and perform
tuning as necessary.

Copyright Siemens AG 2004


Confidential

23/61

2. Course Descriptions
2.1. Course: TT5609, Solaris for User/System Administrator
Target Group

User and System Administrator

Objectives

The main objective of this course is to give instructions on


the main commands and to enable operating and managing
Unix.

Prerequisites

PC experience

Contents

User's Part

Tender 83/59 Iran


Version: 1

Login, Logout, Password; CDE

Display Commands

Files, Directories, Access Permissions

Messages; Command Line

I/O Redirection; Command Chaining

Background Processes

Terminating of Processes

Shells; vi Commands

Administrator's Part
-

Monitor Commands

Boot and Shutdown

Creating New Users

Removing a Password

Installing Printers

Directory Backup on Floppy Disks

System Backup on Tapes

Mounting of File Systems

Network
-

The OSI Model

Ethernet, TCP/IP

/etc/hosts, /etc/hosts.equiv, /.rhosts

rlogin, rcp, rsh

Copyright Siemens AG 2004


Confidential

24/61

Tender 83/59 Iran


Version: 1

telnet, ftp

Installation
-

Partitioning of the Hard Disk

Installation Procedure

Shell Script
-

Command Procedures; Shell Variables

Passing Parameters

Executive Control; Functions

Copyright Siemens AG 2004


Confidential

25/61

2.2. Course: TM2100, GSM Introduction


Target Group

Managers, Service-, Sales- and Development Personnel,


technical sales consultants, Employees needing basic
knowledge about everything related to GSM.

Objectives

The participant gets an overview on the GSM Transmission


Principle, Services, Network Architecture, Protocols &
Procedures, Radio Interface and Siemens GSM solution.
This course is the basic introduction into the "GSM world"
and prerequisite for all succeeding mobile communication
courses, e.g. GPRS; EDGE, UMTS, Introduction & Protocol
Courses.

Prerequisites

Basic knowledge of telecommunication as provided in


course TM1004 ("Telecommunication Basic for
Technicians"),

Contents

Introduction

Tender 83/59 Iran


Version: 1

History

GSM

Current Situation, Market & Trends

Transmission Principles
-

GSM Network Structure

Duplex Transmission & Multiple Access

GSM - Fixed Network Transmission

GSM Air Interface

GSM Services
-

GSM Phase1/2 Services

Applications

GSM Phase 2+ Services

GSM PLMN
-

Overview

Network Elements

Procedures

Copyright Siemens AG 2004


Confidential

26/61

Codes & Identities

GSM Security Features

Location Update

Call Setup / Call Handling

GSM Signaling Overview


-

Tender 83/59 Iran


Version: 1

GSM Signaling Overview

Radio Interface
-

Physics of Layer 1

Logic of Layer 1

MOC / MTC

Siemens Solution
-

SBS

D900/D1800SSS

Operation & Maintenance

Copyright Siemens AG 2004


Confidential

27/61

2.3. Course: TM2110, GPRS/EDGE Introduction


Target Group

Managers, Service-, Sales- and Development Personnel,


Technical-Sales Consultants

Objectives

The participant gets an overview on the GPRS principles,


advantages, network and protocol architecture, most
important procedures, radio transmission, GPRS
enhancements by EDGE and the Siemens GPRS solutions.

Prerequisites

Good knowledge of GSM equivalent to course TM2100


("GSM Introduction")

Contents

Introduction & Overview

Tender 83/59 Iran


Version: 1

GSM - Current Situation, Services & Applications

GSM Phase 2+

GPRS - General Packet Radio Services


-

GPRS Objectives & Advantages

Basic Principles

GPRS Architecture

Logical Functions

GPRS Protocols
-

GSM Phase1/2 Signaling

GPRS User Plane

GPRS Control Plane

The Radio Interface


-

L1 GPRS/GSM

Channel Bundling / Sharing

Coding Schemes

Logical Channels & Multiframes

Procedures
-

Activation of GPRS Services

GPRS Identities & PDP States

GPRS Packet Data Transmission

Copyright Siemens AG 2004


Confidential

28/61

Tender 83/59 Iran


Version: 1

Combined IMSI & GPRS Attach

PDP Context Activation Procedure

Start of MO Packet Transfer

E-GPRS
-

EDGE

E-GPRS

GPRS Siemens Solution


-

Implementation Steps & Future Aspects

Siemens GPRS Support Nodes

GPRS SBS Modifications

Overview: Operation & Maintenance

Copyright Siemens AG 2004


Confidential

29/61

2.4. Course: MN1783-10, RC OBR 7.0 Operation


Target Group

OAM Specialist

Objectives

Upon completion of this course, the participant will be able


to:
-

to perform all configurational tasks for SBS via RC OBR

detect and clear faults in an SBS network

to import and export SW

to extract performance data

Prerequisites

Basic knowledge of telecommunication networks and the


attendance of the course "SBS BR7.0 System Overview"
(MN1780-10) or equivalent knowledge is required.

Contents

Introduction RC

Tender 83/59 Iran


Version: 1

PLMN management structure

RC/SBS network structure

RC functional structure

RC Operation
-

Electronic documentation

Log Management

Filter Management

Network Editor for User View Creation

Security Management - User Profile Creation

Configuration Data Handling


-

Online changes of BSC database

Offline changes of BSC database

CLI, DBAEM

Performance Data Handling


-

Creation of scanners

Presentation of performance measurements

Software Handling

Copyright Siemens AG 2004


Confidential

30/61

Comment

Tender 83/59 Iran


Version: 1

Import software to the RC

Download software to the SBS

Activation of software

Alarm Handling
-

Fault clearance principle

Procedures

Practical exercises for alarm handling on SBS

Minimum/Maximum number of participants: 8/12

Training Method: Instructor-led Hands-on Training

This course can also be delivered on-site by the means of


d-Lab.

Important hint for On-Site Courses: This course has full dlab ability (access to a remote training lab)!

Copyright Siemens AG 2004


Confidential

31/61

2.5. Course: MN1780-10, SBS BR 7.0 System Overview


Target Group

SBS OAM Specialist, SBS Commissioning Specialist, SBS


System Specialist, SBS TAC2 Service Technician, SBS
TAC2 Service Specialist, SBS Performance Expert, SBS
Planning Expert, OTS Operation Specialist, Tool Expert, RC
OAM Specialist, RC Commissioning Specialist, RC System
Administrator

Objectives

Upon completion of this course, the participant will be able


to:
-

have a basic understanding of the Siemens Base Station


System

knows the basic functions of the network elements

remember the interfaces and the SBS architecture

Prerequisites

Basic knowledge of telecommunication networks and


services is required. The couse GSM Introduction (TM2100)
is useful.

Contents

SBS Overview

Tender 83/59 Iran


Version: 1

Operation and Maintenance System

Core Network

Radio Access Network

Radio Interface

GSM Basic Features

Data Transmission in GSM Phase 2+

Location Services

BSC Architecture
-

Functions

Modules

Rack Configuration

BS24x Architecture
-

Architecture

Configuration Examples

Copyright Siemens AG 2004


Confidential

32/61

Comment

Tender 83/59 Iran


Version: 1

BS240XL Details

BS40 / BS41 Details

BS240XS Architecture
-

Main Features

Architecture

Configuration

PicoBTS Architecture
-

Main Features

Architecture

Mechanics

Agent

Server Modules

Enhanced MicroBTS Architecture


-

Main Features

Architecture

Mechanics

Modules

Example Configurations

TRAU Architecture
-

Functions

TRAU Modules

Rack Configuration

OMC Overview
-

Radio Commander Hardware

Operation and Maintenane Link

Minimum/Maximum number of participants 8/12

Training Method: Instructor-led Theoretical Training

This course can also be delivered on-side.

Copyright Siemens AG 2004


Confidential

33/61

2.6. Course: MN1736-10, SBS BR 7.0 Performance Measurement


Target Group

Performance Management Expert

Objectives

The participant can configure the Siemens Base Station


System for the collection of performance data and can
evaluate this data.

Prerequisites

Good knowledge of GSM/DCS network architecture and


functions

Contents

Introduction
-

Overview Measurements Counter


-

Overview of the Siemens Base Station System

Functions of the counters

SBS performance measurements

Administration of Scanner
-

Tender 83/59 Iran


Version: 1

Goals of performance measurement

Performance measurements handling

Signaling Procedures of the Radio Subsystem


-

Overview of the system interfaces and protocols

Complete call sequences

Message Flow of Basic Circuit Switched BSS


Procedures

Message Flow of Basic Packet Switched BSS


Procedures

Concepts and Evaluation


-

Performance measurement concepts

SBS Key Performance Indicators

Practical Examples

Copyright Siemens AG 2004


Confidential

34/61

2.7. Course: MN1786-10, RC OBR 7.0 System Administration


Target Group

RC OBR 7.0 Commissioning Specialist

Objectives

The participant is able to carry out the installation test


procedures for the RC according to the manual. He can
create and modify the RC database by means of the
Network Editor.

Upon completion of this course, the participant will be able


to:
-

to install OMTs and OMPs

to create and modify the RC database by the means of


the Network Editor

to restore and backup the database

Prerequisites

The courses "RC OBR 7.0 Operation" (MN1783-10),


"Solaris for Users/Sytem Administrators" or equivalent
knowledge are required.

Contents

Introduction to RC Components

Tender 83/59 Iran


Version: 1

Configurations overview

Hardware configuration

Software configuration

Installation Procedures
-

OMT installation

OMP installation

Alignment of the components

Test procedures

RC Tool Handling
-

Database Creation

Network Editor

Safeguarding Concept
-

Concept of backup and restore

Backup procedure

Copyright Siemens AG 2004


Confidential

35/61

Comment

Tender 83/59 Iran


Version: 1

Restore procedure

Minimum/Maximum number of participants: 8/12

Training Method: Instructor-led Hands-on Training

Copyright Siemens AG 2004


Confidential

36/61

2.8. Course: MN2585-10, RC OBR 7.0 System Specialist


Target Group

RC System Administration - TAC2

Objectives

The participant is able to administer the RC database with


OCB and IPA and perform system backups. Furthermore
he has a basic understanding the oracle database and can
administer x25 and Q3 interfaces.

Prerequisites

Courses MN1783Ex,MN1786Ex and NM5609 or UNIX


System Administrator

Contents

Introduction to RC

Tender 83/59 Iran


Version: 1

Hardware configuration

Software configuration

RC Tool Handling
-

OMC configuration builder

Interactive panel architect

User Administration
-

Creation of UNIX users

Creation / modification of application user profiles

Q3 Interface
-

Administration of Q3 interfaces

Access to TMN

Sun Link X25


-

X25 structure

Parameters of X25

X25 trace

Oracle for RC
-

Basic Oracle commands

Structure of the RC database

Safeguarding Concept
-

Backup procedures

Restore procedures
Copyright Siemens AG 2004
Confidential

37/61

Tender 83/59 Iran


Version: 1

LAN Configurations
-

TCP/IP networking principles

Administration of a HUB

Administration of router

Remote OMT configuration

Fault Reporting and Symptom Data Provisioning

Copyright Siemens AG 2004


Confidential

38/61

2.9. Course: MN1708-9, RC OBR 5.5->6.0 Delta Training


Target Group

OAM Specialist

Objectives

Upon completion of this course, the participant will be able


to:
-

name HW/SW changes of the Radio Commander as well


OBR6.0/BR6.0 features

name new concepts of the OTS and the new


documentation structure of the Siemens O&M network

Prerequisites

Knowledge of the OBR5.5 Siemens Mobile Radio O&M


network is required

Contents

Overview System Upgrade OBR5.5 -- OBR6.0


-

Comment

Tender 83/59 Iran


Version: 1

Improvements in HW / SW structure

Radio Commander supplemented Handling


-

Command Line Interface Scripts

Electronic documentation

Operation & Maintenance additional functions


-

Changes of BSS database

Creation of Managed Objects and their parameters

Q3 interface to BSC

New commissioning Procedures


-

Installation via CD-ROM

Alignment of the components

Test procedures

Minimum/Maximum number of participants: 8/12

Training Method: Indtructor lead hands-on training

Copyright Siemens AG 2004


Confidential

39/61

2.10. Course: MN1708-10, RC OBR 6.0->7.0 Delta Training New Features


Target Group

OAM Specialist

Objectives

Upon completion of this course, the participant will be able


to:
-

name HW/SW changes of the Radio Commander as


well OBR7.0/BR7.0 features

name new concepts of the OTS and the new


documentation structure of the Siemens O&M network

Prerequisites

Knowledge of the OBR6.0 Siemens Mobile Radio O&M


network is required

Contents

Overview System OBR6.x -- OBR7.0

V480

Autoloader L8

Current Configuration Rules

BSC connection capabiltiy of RC

New SW

Licensing - Jukebox Licenses

OBR 7.0 Features


-

BTS-B with full RC/OTS support

Generation of SMLC e-cita data via pre-calculation


algorithm and by OTS

IP based O-link

Minimum RC_OTS support for TD-SCDMA

Symptom Data provisioning

BR Features - correlated to RC
-

EDGE Support

Flexible Abis Allocation Strategy (FAAS)

Service dependent Power Control and HO Management

BR Features overview
-

Tender 83/59 Iran


Version: 1

Overview of all BR Features

Copyright Siemens AG 2004


Confidential

40/61

Documentation and online help


-

Changes in the Documentation structure

IMS - Structure

OTS Toolset Delta


-

Comment

Tender 83/59 Iran


Version: 1

EDGE support, SMLC and TD-SCDMA if available

Minimum/Maximum number of participants: 8/12

Training Method: Online Session (Synchronous Virtual


University)

Copyright Siemens AG 2004


Confidential

41/61

2.11. Course: MN1707-9, BSS BR 5.5->6.0 Delta Training


Target Group

SBS OAM Specialist, SBS Commissioning Specialist and


SBS System Expert of BR5.5

Objectives

Upon completion of this course, the participant will be able


to:
-

know the new features of this BR release

apply this knowledge to perform operation and


maintenance tasks for Siemens Basestation Systems.

Prerequisites

Detailed knowledge of the release BR5.5 is essential.

Contents

Feature Description BR6.0

Overview System Upgrade BR5.5 - BR6.0

Operation & Maintenance: New Functions

Minimum/Maximum number of participants 8/16

Training Method:

Comment

Tender 83/59 Iran


Version: 1

Instructor-led Theoretical Training

Instructor-led Hands-on Training

This course can also be delivered on-side.

Copyright Siemens AG 2004


Confidential

42/61

2.12. Course: MN1707-10, SBS BR 6.0->7.0 Delta Training New Features


Target Group

SBS OAM Specialist, SBS Commissioning Specialist and


SBS System Expert of BR6.0

Objectives

Upon completion of this course, the participant will be able


to:
-

know the new features of this BR release

Know the new hardware of this BR release

apply this knowledge to perform operation and


maintenance tasks for Siemens Bases Station Systems.

Prerequisites

Detailed knowledge of the release BR6.0 is essential.

Contents

Dynamic Abis Resource Allocation

EDGE: Speeding up into a packet data world

MS/Gb flow control

Link Adaption

Improved Power Control

Service dependent Power Control and Handover


Thresholds

Support of CS3/CS4

Network controlled cell reselection

Handover from GSM to UMTS

Transmission Diversity Time Delay

IP based O-LINK

Common Codec Pool for TRAU

Location based Services: Enhanced TA positioning

New BSC/120

EMICRO II

Upgrade

Tender 83/59 Iran


Version: 1

Scenarios: BR5.5 - BR7.0, BR6.0 - BR7.0

Hands-on

Copyright Siemens AG 2004


Confidential

43/61

Comment

Tender 83/59 Iran


Version: 1

Minimum/Maximum number of participants 8/10

Training Method: Instructor-led Theoretical Training

This course can also be delivered on-side.

Copyright Siemens AG 2004


Confidential

44/61

2.13. Course: MN1709-10, SBS BR 6.0->7.0 Upgrade Workshop


Target Group

SBS OAM Specialist, SBS Commissioning Specialist and


SBS System Expert of BR6.0

Objectives

Upon completion of this course, the participant will be able


to:
-

know the theorie of upgrade procedure

Know how to perform LMT upgrade

Know how to perfom SBS upgrade

Prerequisites

Detailed knowledge of the release BR6.0 is essential.

Contents

Upgrade Procedure BR6.0 - BR7.0

Comment

Tender 83/59 Iran


Version: 1

LMT Upgrade

SBS Upgrade

Minimum/Maximum number of participants 8/10

Training Method: Instructor-led Hands-on training

This course can also be delivered on-side.

Copyright Siemens AG 2004


Confidential

45/61

2.14. Course: MN1782-10, SBS BR 7.0 Operation, Administration and


Maintenance
Target Group

OAM Specialist, Commissioning Specialist

Objectives

Upon completion of this couse, the participant will be able to:


-

perform standard operation, administration and


maintenance tasks via the local maintenance terminal
LMT

use the relevant system documentation

Prerequisites

The Course SBS System Overview (MN1780) or equivalent


knowledge is essential.

Contents

LMT Handling

Tender 83/59 Iran


Version: 1

LMT Hardware and Software

SBS Software on LMT Hard Disk

Start LMT, Log-on and Log-off

Input Handler

Message Browser

Software Management on BSC

Command Line Interface

BSC Maintenance
-

BSC Fuse and Alarm Panel

Alarm Handling

Fault Clearance

BTSplus Maintenance
-

Introduction

Fault Clearance

Examples

BTSone Maintenance
-

Introduction

BTSE Fault Messages

Fault Clearance

Copyright Siemens AG 2004


Confidential

46/61

Comment

TRAU Maintenance
-

TRAU fuse and alarm panel

Alarms

Diagnosis

TRAU Fault Message

Fault Clearance

Software tools
-

DBAEM Tool

LOGDEC Tool

Performance Measurements

Symbolic Navigator

BSC Database
-

Creation tree

BSC Related Parameters

PCU Related Objects

Carrier Related Objects

TRAU Related Objects

Database Example

Timeslot Assignment on A, Asub, Abis

Xconnect
-

Configuration

Two Terminating PCMB Lines

Examples

Remote Inventory
-

Overview

Glossary

Handling

Example

Minimum/Maximum number of partipants: 8/12

Training Method:
-

Tender 83/59 Iran


Version: 1

Example

Instructor-led Theoretical Training


Copyright Siemens AG 2004
Confidential

47/61

Tender 83/59 Iran


Version: 1

Instructor-led Hands-on Training

The course can also be delivered on-site.

Copyright Siemens AG 2004


Confidential

48/61

2.15. Course: MN1784-10, SBS BR 7.0 Commissioning


Target Group

Commissioning Specialist

Objectives

Upon completion of this couse, the participant will be able


to:
-

carry out the installation test procedures for the Siemens


Base Station System

use the customer documentation for commissioning

use the Acterna 8631 simulation tool to perform offline


tests

Prerequisites

The Courses SBS System Overview (MN1780) and SBS


Operation, Administration and Maintenance (MN1782) or
equivalent knowledge are essential.

Contents

BSC Commissioning

Commissioning Procedure

Visual Inspection

BSC Bring-Up (e. g. load MPCC, download software and


database)

BSC Restart Verification

BS24x/4x Commissioning
-

Commissioning Procedure

Visual Inspection

BTSE Bring-Up (e. g. software download and activation,


creation of managed objects)

BTSE Restart Verification

E-MicroBTS Commissioning
-

Commissioning Procedure

Visual Inspection

Commissioning Step-by-Step (software download and


activation, creation of managed objects)

PicoBTS Commissioning
-

Tender 83/59 Iran


Version: 1

Commissioning Procedure

Copyright Siemens AG 2004


Confidential

49/61

Comment

Visual Inspection

Commissioning Step-by-Step (e. g. software download


and activation, creation of managed objects)

TRAU Commissioning
-

Commissioning Procedure

Visual Inspection

TRAU Bring-Up

TRAU Restart Verification

MA10 / Abis Simulation


-

Cabling of the MA10

Running Abis Simulation

Remote Inventory
-

Overview

IDF Handling

Example

Minimum/Maximum number of partipants: 6/8

Training Method:

Tender 83/59 Iran


Version: 1

Instructor-led Theoretical Training

Instructor-led Hands-on Training

The course can also be delivered on-site.

Copyright Siemens AG 2004


Confidential

50/61

2.16. Course: MN1888-10, SBS BR 7.0 System Specialist for GPRS/Edge


Target Group

GPRS SBS System Specialist; Configuration Management


Expert; Fault Management Expert

Objectives

The participant can trace all GPRS-related SBS interfaces


and interpret the data obtained. The participant understands
the relation of the GPRS database parameters.

Prerequisites

Training as SBS System Specialist (MN1788); GPRS


Introduction (TM2110)

Contents

Introduction

Tender 83/59 Iran


Version: 1

Overview: GPRS Interfaces

Protocols used in GPRS-PLMN

Hardware Impacts

GPRS Air Interface


-

Packet Data Channels, Multiframe Structure, Network


Access etc.

Protocol Stack

Abis Interface
-

Layer 1 on PCM

PCU Frames

Gb Interface
-

Layer 1: Physical Realization

Layer 2: Frame Relay and Network Service

Layer 3: BSS GPRS Protocol

Examples: Call Flows


-

System Info Broadcast

GPRS Attach Procedure

PDP Context De-/Activation

Uplink Temporary Block Flow

Downlink TBF

PS Paging Procedure

Copyright Siemens AG 2004


Confidential

51/61

Routing Area and Cell Update

Suspend / Resume Procedure

GPRS Detach Procedure

TCP/IP Service Programs and Applications

BSC GPRS-Related Database


-

Tender 83/59 Iran


Version: 1

Explanation of Database parameters

Copyright Siemens AG 2004


Confidential

52/61

2.17. Course: MN1788-10, SBS BR 7.0 System Specialist for GSM


Target Group

SBS System Specialist; Configuration Management Expert;


Fault Management Expert

Objectives

The participant is able to use test equipment like MA10,


K1103, K1205, TEMS. He can trace all SBS interfaces,
interpret the data and understands the relation of the SBS
database parameters.

Prerequisites

Training as OAM Specialist, Commissioning Specialist or


Network Element Manager and minimum 60 days field
experience

Contents

The Technical Assistance Center TAC

ISO-OSI Model and Protocols

ISO-OSI layered model

Protocol types in the GSM and GPRS system

Air Interface Um
-

Layers 1, 2 and 3

Call Sequences on Um

TEMS
-

Interface Abis
-

Layers 1, 2 and 3

MA10 / Monitor Abis


-

Cabling

Handling

A-Interface
-

Signalling System CCSS#7

Complete Call Sequences

Formatting Rules

K1103 and K1205 Protocol Testers


-

Tender 83/59 Iran


Version: 1

Handling of TEMS

Handling of K1103 and K1205

Copyright Siemens AG 2004


Confidential

53/61

IMSI Tracing and Cell Traffic Recording

Synchronization
-

BSC Database
-

Creation Tree

BSC, PCU and TRAU Related Parameters

TRX Related Parameters

Database Example

Cell Selection / Cell Reselection

Handover

Types of Handover

Measurement Preprocessing

Threshold Comparison and Handover Detection


Algorithms

Target Cell List Generation

Handover Signalling and Timers

Handover Related Performance Measurements

Channel Configuration
-

Control Channels

Extended Channel Mode

Related Performance Measurements

Hierarchical Cell Structure HCS


-

Mobile speed sensitive handover

Priority Layers

Concentric cells

Extended Cells

Radio Link Failure


-

Tender 83/59 Iran


Version: 1

Synchronization in PDH and SDH networks

Parameters, Procedures and Performance


Measurements for Radio Link Failure

Overload Handling
-

Overload Detection and Counter Measures

Timers and Related Performance Measurements

Copyright Siemens AG 2004


Confidential

54/61

Tender 83/59 Iran


Version: 1

Interference Reduction
-

Power Control

Frequency Hopping

Discontinuous Transmission

Channel Allocation due to Interference Level

Error Symptom Saving

Copyright Siemens AG 2004


Confidential

55/61

2.18. Course: MN1790, BSS Radio Network Planning and Optimization


Target Group

Objectives

Planning Expert

Performance Expert

Upon completion of this course, the participant will be able


to:
-

to perform coverage, capacity and frequency planning

to perform network optimization

Prerequisites

The courses MN1780 and TM2100 or equivalent knowledge


is recommended.

Contents

Introduction

Tender 83/59 Iran


Version: 1

GSM and SBS fundamentals aspects

Planning objectives and principle planning steps

Specifics influencing Radio Network Planning

Site Survey & Site Investigation

Antennas (Types, Parameters, Patterns, Tilts, Heights,


Diversity, Cables and Intermodulation)

Antenna near products (amplifiers, combiners etc.)

Coverage Planning
-

Definition of terms

Characteristics of radio wave propagation

Radio wave propagation models

Suitable prediction models for different cell types

Location probability

Link Budgets

Rayleigh fading

Log-normal fading

Jakes formula

Interference margin

Noise figure calculations

Path loss balance


Copyright Siemens AG 2004
Confidential

56/61

Cell coverage calculation

Nominal cell plan

Basics about digital map data

Principles of planning tools and their usage

Measurements tools supporting cell planning

Cell types

Omni versus sector cells

Capacity Planning
-

Fundamentals of traffic theory

Erlang-B and Erlang-C formula

Trunking gain

Traffic distribution, forecasting and measurements

Dimensioning (TRXs, Control Channels and Traffic


Channels)

Capacity and cell radius

Dimensioning of terrestrial interfaces

Frequency Planning
-

Interference

Frequency reuse and reuse patterns

Clusters

Frequency planning strategies

Spectrum efficiency

Optimization of spectrum efficiency

Interference reduction

Frequency hopping

Power Control

VAD/DTX

Interference matrix and analysis

Frequency allocation strategies

Tools supported frequency allocation

Increase of network coverage


-

Tender 83/59 Iran


Version: 1

Repeaters implementation, types and characteristics

Copyright Siemens AG 2004


Confidential

57/61

Comment

Tender 83/59 Iran


Version: 1

Decoupling and time delay

Influences of repeaters

Repeater and link budget

Further methods and techniques to increase coverage

Increase of Network Capacity


-

Spectrum increase

Cell sectorization and splitting

Half rate and adaptive multi rate

Adaptive multi rate

Micro cell planning

Hierachical cell structure planning

Multiple band and mode operation

Cell load dependent handover boundaries

Radio Network Optimization


-

Reasons for the Need of Optimization

Performance Data Measurements and Drive Tests

Optimization Strategies

Optimization of Physical and Database Parameters

Example Drive Tests

Minimum/Maximum number of participants: 8/20

Training Method: Instructor-led Theoretical Training with


exercises

Participants must bring along their pocket-calculators.

This course can also be delivered on-site.

Copyright Siemens AG 2004


Confidential

58/61

2.19. Course: MN1736-10, SBS BR 7.0 Performance Measurement


Target Group

Performance Management Expert

Objectives

The participant can configure the Siemens Base Station


System for the collection of performance data and can
evaluate this data.

Prerequisites

Good knowledge of GSM/DCS network architecture and


functions

Contents

Introduction
-

Overview Measurements Counter


-

Overview of the Siemens Base Station System

Functions of the counters

SBS performance measurements

Administration of Scanner
-

Tender 83/59 Iran


Version: 1

Goals of performance measurement

Performance measurements handling

Signaling Procedures of the Radio Subsystem


-

Overview of the system interfaces and protocols

Complete call sequences

Message Flow of Basic Circuit Switched BSS


Procedures

Message Flow of Basic Packet Switched BSS


Procedures

Concepts and Evaluation


-

Performance measurement concepts

SBS Key Performance Indicators

Practical Examples

Copyright Siemens AG 2004


Confidential

59/61

2.20. Course: MN1889-10, E-/GPRS BR 7.0 Radio Network Parameters


Target Group

Radio Planning Expert and Performance Management


Expert

Objectives

The participant has a good understanding of the parameters


of the SBS and their mutual influence of E-/GPRS. (e.g.
parameters for handover, cell selection, interference
reduction etc.) He can thus optimize the configuration and
the performance of the SBS for E-/GPRS.

Prerequisites

Qualified knowledge of GSM/DCS network architecture and


functions, Skills on GSM Radio Network Parameters or
Course MN1789

Contents

Radio Channel Management


-

Tender 83/59 Iran


Version: 1

Radio channel configuration

Cell Parameters
-

Cell selection parameters

Cell reselection parameters

Interference Reduction
-

Power control mechanism

Frequency hopping

Discontinues Reception

Radio Network Parameters for E-/GPRS

Gb Interface Administration

Copyright Siemens AG 2004


Confidential

60/61

2.21. Course: MN1789-10, SBS BR 7.0 Radio Network Parameters for GSM
Target Group

Performance Management Expert

Objectives

The participant has a good understanding of the parameters


of the SBS and their mutual influence. (e.g. parameters for
handover, cell selection, interference reduction etc.) He can
thus optimize the configuration and the performance of the
SBS.

Prerequisites

Qualified knowledge of GSM/DCS network architecture and


functions

Contents

Channel Configuration

Control Channels

Extended Channel Mode

Adaptive Multirate

Overload Handling
-

Design of Radio Cells


-

Cell Selection/Reselection

Handover

Hierarchical Cell Structure


-

Mobile Speed Sensitive Handover

Priority Layer

Interference Reduction
-

Power Control

Frequency Hopping

Discontinuous Transmission

Channel Allocation due to Interference Level

Radio Link Failure


-

Tender 83/59 Iran


Version: 1

Detection and Countermeasures

Procedures and Parameters

Copyright Siemens AG 2004


Confidential

61/61

Вам также может понравиться