Академический Документы
Профессиональный Документы
Культура Документы
B TECH.
CIVIL ENGINEERING
GEOTECHNICAL ENGINEERING.
ASSIGNMENT 2. (To submit by 11March 2015)
(c). A soil has a compression index Cc. of 0.28. At a stress of 120 kN/ square meter,
the void ratio was 1.02. Calculate (i) void ratio If stress on soil is Increased to 180 kN /
square meter. (iii) the total settlement of stratum of 6 meter thickness. ( page 232P)
Q.3 (a) How is active earth pressure different from passive earth pressure, Explain.the
concepts with sketches to Indicate the different types of lateral earth pressures.
(b) A 5 meter High retaining wall is shown below:
Determine the Rankine active pressure on the wall(1) before the format ion of crack, (2)
After the format ion of crack. ( page 510 K)
Q 4. (a) What do You understand by stability of slopes in soil excavation or soil fill. What
are the Values of factor of safety in (1) end of Construction (embankments and cutting)
(2) strada see page condition. (3) Sudan drawdown condition.
(b) A cutting 10 meter deep is to be made in a soil having the properties Cu =
20kN / square meter, phi = 15 degrees.What is the Maximum angle of slope that Will
have a factor of safety against failure of 1.5. ? (page 384 to 385)
Q 5 (a) An excavation is Made with a vertical face in a clay soil which has Cu= 50 kN /
square meter, total density = 18 kN / cubic meter. Determine the Maximum depth of
excavation so that the excavation is Stable. ( page 385 G).
(b). Write short notes on (1) Effect of stratified soil in the backfill. (2) Effect of c.
phi. soils as backfill.
(3) Effect of Water table on a backfill. (4) Effect of surcharge
load on backfill surface.
( page 370 to 377P)
--------------000000000------------------------