Академический Документы
Профессиональный Документы
Культура Документы
UNIT TEST
SEMESTER I
SERIESE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
c) DGCA Hqs
d) Ministry of External Affairs
14. Approval of Indian organization will be done by
a) Controller of Airworthiness
b) Officer incharge sub RAWO
c) DAW of RAWO
d) DAW at DGCA Hqs
15. Form CA 182 C is used for
a) Approval of Indian organization
b) Renewal of approval of foreign organization
c) Renewal of approval of Indian organization
d) Approval of foreign organization
16. Mark the incorrect statement, if any.
a) In case Indian Operators desire to carry out maintenance activities including daily inspection of their fleet out side
India, DGCA Hqs will grant such approval
b) For issue of approval a statement signed by accountable manager is mandatory
c) CA 182 D is used for renewal of approval of foreign organizations
d) All above statements are correct
17. Scope of approval of an organization will depend on
a) Qualification of QCM & Dy QCM
b) Capacity of the organization and availability of equipment
c) Both A & B
d) None
18. The nodal officer shall be reporting to
a) The QCM
b) Head of organization
c) Accountable manager
d) DGCA
19. The function of nodal officer is to
a) Ensure that all personnel are appropriately trained and qualified to accomplish the work
b) Ensure that appropriate instructions are developed, maintained, documented and followed for compliance, with
requirements
c) Provide required spare parts and components from approved sources with appropriate documents before use on
aircraft owned by his organization
d) All of the above
20. Undergoing refresher course covering up-to date knowledge of technology, organizational procedure etc. is necessary for
all certifying staff atleast once
a) In two years
b) In a year
c) In five years
d) In six months
21. Mark the incorrect statement, if any.
a) Engineering organization manual is not required to be approved by DGCA
b) The QC manual will be approved by RAWO/Hqs
c) All pages of QC manual will be stamped by the DGCA
d) No incorrect statement
22. The engineering organization manual contains
a) Scope of work authorized by DGCA
b) Aims and objectives of the organization
c) The policy for amending QC manual, QA manual, Engg. orgn. manual
d) All above
23. Mark the incorrect statement, if any.
a) The quality assurance personnel will be from QC dept. who should highly experienced and have rating/approval is
their area of work
b) The quality assurance manager gives his report directly to QCM
c) The application for grant of approval of fuel companies shall be submitted at DGCA Hqs
d) All incorrect statements
24. Procedure for duplicate inspection of flight & engine controls is enumerated in
a) Quality control manual
b) Flight manual
c) Maintenance system manual
d) Aircraft maintenance manual
25. A list of maintenance related forms will be available in
a) Maintenance system manual
b) Engineering organization manual
Page 2 of 10
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
c) When a new certificate of approval is issued, previously issued certificate is to be returned to the RAWO
d) All correct statements
Which of the following changes in AO must be notified to the DGCA at the earliest
a) Change of Accountable Manager
b) Change of QCM
c) Change of location of maintenance facilities
d) All of the above
The QC manual Volume I, Section II, Chapter 3 contains
a) Modifications
b) Documentations
c) Computer maintenance
d) Maintenance programme-Inspection schedule
An organization seeking approval in Cat-B shall submit ______ no. of specimens of anodic oxidation process
a) Three specimens
b) A photograph showing plateau size
c) Twelve specimens
d) No specimen required
CAR Series E part VII deal with
a) Fuel, lubricants organizations
b) Stores organizations
c) AMO
d) Test laboratories
Organizations approved in category D shall issue
a) Certificate of manufacture
b) Release note
c) Certificate of maintenance
d) None of these
Organizations seeking approval in cat D shall have to meet the requirements laid down in
a) CAR Series E Part VII
b) CAR Series E Part II
c) CAR Series E Part I
d) CAR Series E Part IV
The organization carrying out chemical analysis of aircraft goods will be approved in
a) Category B
b) Category G
c) Category A
d) None of these
Petroleum is bulk means
a) Petroleum contained in a container exceeding 900 ltrs in capacity
b) Petroleum in a receptacle in excess of 1900 ltrs
c) Petroleum is a receptacle exceeding 900 gallons in capacity
d) None of these
Which organization needs an approval from chief inspector of explosives, in addition to approvals from DGCA
a) Category A
b) Category E
c) Category D
d) No additional approvals. All approvals are granted by DGCA, and is sufficient
Organization approved in cat E will issue a voucher to the customer with each consignment of aviation fuel delivered by it
into an aircraft in order to certify
a) The quantity
b) The quality
c) The airworthiness requirements
d) None of these
The procedure for receipt and testing of overseas shipment and the method of acceptance in case of cat E organization
will be found in
a) QC Manual
b) QA Manual
c) Maintenance system Manual
d) Engineering organization Manual
Airworthy & Serviceable material, awaiting evidence of having been received from approved sources are called
a) Bonded stores
b) Serviceable stores
c) Bulk stores
d) None of these
Release notes, will be preserved by stores organization for atleast
a) Ten years
b) Five years
c) Two years
d) One year
_________ Specifies that applicants who have passed a course from DGCA approved institute will be granted one year
relaxation in total aeronautical experience for grant of AME license
a) Rule 60
b) Rule 61
c) Rule 62
d) Rule 63
Page 4 of 10
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
1.
2.
3.
4.
5.
6.
7.
.
b)
Who have contracted maintenance of their aircraft to an a AMO
c)
It is applicable to state government a/c only
d)
It is applicable to private aircraft only
Certifying staff issuing certificate of maintenance shall have
a)
Six months of actual a/c maintenance experience
b)
Six months of actual a/c maintenance experience in the preceding 12 months
c)
Six months of actual a/c maintenance experience in the preceding 15 months
d)
Six months of actual a/c maintenance experience in preceding 24 months
Quality control manual of Indian Airlines will be approved by:
a)
RAWO
b)
DGCA HQ
c)
QCM
d)
RAWO/Sub RAWO
Maintenance systems manual of Cat C organization shall be approved by:
a)
DGCA b)
DGCA in case of Indian Air lines
c)
RAWO in consultation with DGCA HQ
d)
None
Vertical black line along the left hand margin of the text of the manuals is to identify:
a)
Identifying revisions and amendments
b)
Identifying important points
c)
Identifying items of inspection as per MPD
d)
None
Special inspection checks like hard landing etc. shall be included in
a)
QC manual
b)
Maintenance scheduler
c)
Special inspection schedule
d)
None
Inspection schedule of scheduled operator will be approved by:
a)
QCM b)
RAWO c)
DGCA
d)
QCM in case of operator with 3 years experience, others by RAWO
Investigation of defects shall be completed;
a)
Within 4 months b)
Within 3 months
c)
Within 6 Months d)
Within 15 days
Certificate issued to signify that the design of a type of aircraft complies with applicable design standard?
a) Export C of A b) Type Certificate
c) Certificate of compliance
d) None
The approval of the approval personnel in Cat A organization will be granted by:
a) RAWO
b) DGCA
c) QCM if delegated by RAWO
d) a & c correct
Completed items in any category A organization shall be identified by:
a)
Affixing part serial number
b)
As in (a) or any other markings as per approved specification drawing
c)
As in (b) and inspection stamps of final inspection shall also be affixed
d)
As in (c) where these are not practicable, a tag or label shall be fixed.
Mark correct statements
a)
Certification records of completed work during manufacture shall be retained for five years
b)
Manufacturer shall have obtained approval under Cat `F and comply with all requirements
c)
Cat-A organization shall keep all manuals (QC Manual, MSM & EOM) up-date
d)
All the statements are correct
Corrective actions, improvement in the product subsequent to receiving defects / in service problems from operators /
AMO shall be notified to:
a)
All users of the products b)
DGCA
c)
As in (a) & (b) and the procedure shall be included in QC Manual
d)
As in C and the same may be included in MSM
After an aircraft component / item of equipment has been manufactured
a)
QCM will issue certificate of manufacture
b)
QCM or an authorized person will issue certificate of manufacture
c)
QCM or an approved person will issue certificate of manufacture
d)
(b) & (c) are in-correct
Heat treatment applied to airframe or engine parts or accessories is the scope of:
a)
Category F organization b)
Category C organization
c)
Category B organization d)
Category D organization
Mark correct statement
a)
All changes / modifications in Category B organization will have DGCA concurrence
b)
All changes / modifications effecting airworthiness / safety of aircraft shall be implemented after concurrence by
RAWO
c)
All changes / modifications in an approved organization shall be promptly notified to RAWO
Page 6 of 10
9.
10.
11
12.
13.
14.
15.
16.
17.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
d)
All are in-correct statements
Category B organization shall have
a)
All three manual
b)
QC & maintenance system manual
c)
EOM & QC manual
d)
EOM & MSM
Test specimen submitted by the firm for approval of cat B organization should have been
a)
Processed in any DGCA approved organization
b)
Processed in applicants workshop
c)
As in (b) under the supervision of DGCA representative
d)
As in (b) under the supervision of RAWO representative
Test specimen required to be submitted for approval of cadmium plating
a)
Twelve specimen 8X2X16 Swg b)
Twelve specimen 3X3/4X16 Swg
c)
Three specimen 8X2X16 Swg d)
None
The firm approved under Category B will issue the
a)
Certificate of Maintenanceb)
Certificate of compliance
c)
Certificate of inspection d)
Test report & Release Note
The inspectors of Cat-C organization shall be approved by:
a)
DGCA
b)
RAWO c)
Local Airworthiness Office
d)
QCM
Aircraft /Aircraft components released by Cat-C organization after the item has been serviced /inspected or modified
shall be accompanied by:
a)
Certificate of maintenance b)
Release Note
c)
Both A&B
d)
As in C along with Test report
Certificate of maintenance by a Category C organization shall be signed by:
a)
QCM
b)
Approved signatory
c)
AME
d)
AME/Approved/Authorized person
Firm asking for approval of Category D shall prepare and submit the following manuals
a)
EOM
b)
EOM&QCM
c)
QCM & MSM
d)
QCM & MSM
Test report issued by approved organization shall be signed by
a)
Approved signatories
b)
QCM c)
Authorized Person
d)
Licensed Engineer
Bulk storage / Bulk mobile equipment used by Category E organization shall be approved by
a)
DGCA
b)
RAWO c)
Local Airworthiness Office
d)
Chief explosive inspection
Test laboratories of Category E firm will be approved by
a)
RAWO b)
QCM c)
DGCA
d)
None of the above
Format of release note and sale vouchers of Category E organization shall be approved by:
a)
QCM b)
RAWO c)
DGCA
d)
None of the above
Release note and sale vouchers issued by Category E organization shall be preserved for
a)
5 years
b)
10 years c)
2 years
d)
1 year
Release note signatory is
a)
A person approved by QCM to Sign Release Note
b)
A person approved by RAWO to Sign Release Note
c)
A person approved by the organization to Sign Release Note
d)
A person approved by DGCA to issue Release Note
Stores where materials received from approved source with proper evidence are stocked:
a)
Bonded stores
b)
Quarantine
c)
Approved stores
d)
Category F organization
A certificate issued under approval granted by DGCA certifying that the materials / aircraft components have been received
from approved source and they are airworthy:
a)
Release Note
b)
Certificate of maintenance
c)
Type certification documents
d)
None of the above
A/c components drawn from bonded store but having been rejected after inspection are returned along with
a)
Release Note
b)
Rejection Note c)
Log Card/Log Book
d)
Inspection Report
Distribution of rejection note is such that
a)
Third copy is for record b)
First copy is to supplier
c)
Second copy is to RAWO d)
First copy is to RAWO
Mark the person responsible to ensure that goods released to customers from cat-F organization have not deteriorated
during storage
Page 7 of 10
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
10.
11.
12.
13.
14.
15.
d)
None of the above
Appointment of NODAL OFFICER is the requirement of
a) All AMOs
b) All operators c) Owners/operator of General Aviation A/C
d) As in C who contracted maintenance to an AMO
17.
Which one of the following is responsible to ensure regular receipt of specific aircraft literature, amendments etc, and
making them available to AMO?
a) QCM b) Accountable Manager c) Nodal Officer d) DGCA/RAWO
18.
Certifying staff involved in maintenance of aircraft shall undergo refresher course once in
a)
12 months
b)
24 months
c) 3years
d)
As desired by DGCA
19.
Internal audit by QA team shall be carried out:
a)
Once in every year
b)
Twice in every year
a)
30 days before renewal of organization
b)
60 days before renewal of organization
20.
How many copies of manuals are required to be submitted for approval of a firm?
a)
Two
b)
Three c)
Four
d)
One
21.
Any condition classified as major defect observed during maintenance or operation shall be reported to
a)
DGCA
b)
Manufacturer
c)
DGCA and manufacturer d) None
22.
The following shall be reported to DGCA/ RAWO:
a)
Major defect
b)
Any condition classified as major defect
c)
Mechanical delay d)
All the above
23.
Investigation of major defect shall be completed with in:
a)
Four months
b)
Three months
c)
As early as possible
d)
None of the above is correct
80.
The form and manner of certificate issued by AO/AMO shall be approved by:
a) DGCA HQs
b) RAWO
c) DGCA HQs
or RAWO at the time of approval
d) QCM/Chief QCM
01.
Grant of approval to organizations engaged in ACAS modifications is governed by
a) Rule 133A of 37
b) Rule 133B of 34 c) Rule 133 C of 37 d) Rule 133 B of 37
2.
An organization located out side India approval granted by DGCA under
a)
CAR&AAC 4 of 1998
b)
CAR & ACCC 5 of 1998
c)CAR& AAC 6 of 97
d)
CAR &AAC 8 of 1998
3.
Certificate of maintenance is
a)
A certificate issued in respect of aircraft, aircraft component / item equipment
b)
Issued by appropriately licensed AME or approved person or authorized person
c)
Issued after carrying out servicing, modifications, repairs and inspection etc.
d)
All as above, certifying that work has been performed in accordance with the airworthiness requirements
stipulated by DGCA
4.
Release note
a)
A document accompanying the sale of aircraft components spares, materials goods
b)
Certifying the same were be obtained from an approved source
c)
After manufacture / repair/overhaul all relevant airworthiness requirements of the DGCA are satisfied
d)
All correct
5.
For issue of approval to an organization___ required
a)
CA 182 A
b) Fees
c)
Statement of Accountable Manager d) All of the above
6.
Rejection Note means
a)
A document issued by an approved organization
b)
For the purpose of advising details of the rejection of certified aircraft goods, which fail to meet the applicable
requirements
c)
Only A is correct
d)
Both A and B correct
7.
The scope of approval for routine maintenance of aircraft shall
a) Not less than 50 hrs.
b) Not less than 100 hrs.
c) Not less than 200 Hr
d) All the above
8.
Storage and handling procedure for electro static devices are detailed in
a) AAC 5 of 2002b) AAC 6 of 2000
c) AAC 8 of 2002
d) AAAC 2 of 2004
9.
Literature required for aircraft maintenance as per scope of approval
a)
Aircraft maintenance manual, component maintenance manual, CAR, advisory circular, airworthiness directives
b)
Structural repair manual, Illustrated parts catalogue, wiring diagrams manual, Component maintenance manual
c)
Service Bulletins (SBs), service information letters, MMEL
d)
All correct
10.
Quality control and assurance manuals approved by -->mark incorrect answer
a)
Indian airlines - DGCA HQs
16.
Page 9 of 10
b)
Deccan Airlines - RAWO
c)
Crescent Airways - RAWO southern region
d)
Air India - DGCA HQs.
11.
Engineering organization manual to be approved by
a)
Need not required to be approved by DGCA
b)
As at a), but its contents may influence DGCA decision
c)
It is to be approved by RAWO
d)
None
12.
Maintenance system manual to be approved by
a)
To be approved by regional airworthiness office
b)
As a) in consultation with DGCA HQs.
c)
As a) in consultation with Civil Aviation Minister
d)
None of the above
13.
The periodicity of inspection schedules shall be expressed
a)
Lapsed flying hours
b)
Lapsed calendar period
c)
Both
A and B correct
d)
None
14.
Validity of approval
a) One year
b) Six months
c) 31st December of the year d) All correct
15.
Renewal of approval for Indian airlines
a) CA 182 B
b) CA 182A
c) CA 182 C
d) CA 182 D
16.
Approval of below 100 hrs. Inspection at sub base
a)
Sub base within the country not required fresh approval
b)
Inspection schedules approved at the main base shall be followed at sub base
c)
Both A and C correct
d)
None of the above
17.
Preservation of records
a)
Approved Organization must retain a copy of all inspection records and data for 2 year
b)
Approved organization must retain records and data 180 days
c)
Approved organization must retain records and data for 2 weeks
d)
All correct
18.
Distribution of release note
a) 1st copy to the consignee
b) 3rd copy to the organization records
nd
c) 2 copy to RAWO
d) All correct
19.
Rejection note is to be distributed
a)
1st copy to the suppliers
b) 2nd copy to the organization
rd
c)
3 copy to RAWO Office
d) All correct
20.
Change of name of approved organization
a)
Certificate of approval no longer valid
b)
On written application by the new organization, DGCA may change the name by striking off old name
c)
Previously issued documents will be effective with DAWs signature
d)
Both b) and c) correct
21.
Certificate of manufacture means
a)
A certificate issued by duly authorized person
b)
The aircraft/component mentioned there in has been manufactured by the firm
c)
The aircraft has been manufactured according to approved drawings
d)
As in a) & b) and has been manufactured as per approved specification and drawings and is airworthy
22.
Type certificate means
a)
A certificate issued or validated by DGCA
b)
Signify that the design type of aircraft, aircraft component or item of equipment is acceptable to DGCA
c)
That the design complies with the applicable design standard as specified or approved
d)
All correct
23.
All records of inspection and certifications of completed work in an approved manufacturer like HAL shall be retained
a) 5 years
b) 3 years
c) 5 years from the date of manufacture
d) 4 years
Page 10 of 10