Академический Документы
Профессиональный Документы
Культура Документы
LIGHTING
SOLUTIONS
All the resources you need to bring your designs to life
LIGHTING
SOLUTIONS
CONTENTS
FLOOD LIGHT
LED DOWNLIGHTS
10
SOLAR POWERED
LED SIGNALS
12
14
FLOOD LIGHT
Back to Contents
Click here to view all recommended products for this featured solution
LM3450A LED Drivers with Active Power Factor Correction and Phase Dimming
Decoder
The LM3450/50A is a power factor controller (PFC) with separate phase dimming decoder. The
PFC regulates the output voltage while maintaining excellent power factor. The phase dimming
decoder interprets the phase angle and remaps it to a 500Hz PWM output. This device is ideal
for implementing a dimmable off-line LED driver for 10-100W loads. Learn more...
Order code: 1859819
Back to Contents
Click here to view all recommended products for this featured solution
High Efficiency Lens with 32 Flood Beam for 90W Watt Emitters with Holder
This 32 beam lens combined with LedEngin LZP-series 90W single color emitters provides an
efficient and highly uniform smooth light gradient for illumination applications. The unique design
provides users with maximum luminous output and excellent beam uniformity. Learn more...
Order code: 1901525
LED DOWNLIGHTS
Back to Contents
LED downlight and LED spotlight adoption represents a key goal for the LED
lighting industry. By providing a solderless interconnection hub TE Connectivity
have enabled easy installation of Bridgelux RS and Lumileds Luxeon S LEDs,
allowing attachment to a heat sink or PCB using standard M3 screws.
On the block diagram below you can find associated products to provide a
complete installation solution for a LED downlight system using Bridgelux RS
or Lumileds Luxeon S LEDs, allowing you to produce cost-effective LED
downlights. [+MORE]
Click here to view all recommended products for this featured solution
DEVELOPMENT
KITS
element14 carries the widest selection of
Development Kits from the top suppliers in both
Analog and Embedded design. Check out the
exclusive full-featured Development Kits from
element14.
LPC4357 MULTIMEDIA
EVALUATION BOARD
Order code: 2148863
FREESCALE
FREEDOM PLATFORM
Order code: 2191861
Back to Contents
As the next generation of lighting source, high power LEDs have a number
of advantages such as power saving, efficiency and cold start. They are
environment friendly and have a long life which reduces the cost of
maintenance. It is reported in research that an LED lamp of 100W or so can
reach the lighting intensity of a 250W high voltage sodium lamp,
presenting significant power efficiency. LEDs require low voltage DC supply,
and therefore AC/DC conversion is necessary if they are powered by AC
mains. [+MORE]
Click here to view all recommended products for this featured solution
10
11
Back to Contents
Solar powered LED signals have the capability of getting power from
sunlight, which makes them suited for the signals in the places where power
lines are not available but traffic condition need to be controlled.
Solar powered signals have solar panel installed in their power supply
systems and store the unused power in batteries as the backup power
supply. These LED signals usually include high brightness LEDs of three
individual colors - red, yellow and green. [+MORE]
Click here to view all recommended products for this featured solution
12
RS-485/RS-422 Transceivers
The MAX13080E-MAX13089E +5.0V, 15kV ESD-protected, RS-485/RS-422 transceivers feature
one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high
receiver output when receiver inputs are open or shorted. The receiver outputs a logic high if all
transmitters on a terminated bus are disabled (high impedance). The MAX13080E family include
a hotswap capability to eliminate false transitions on the bus during power-up or hot insertion.
Learn more...
Order code: 1593305, 1593306, 2085107
13
Back to Contents
Click here to view all recommended products for this featured solution
14
High Performance Resonant Mode Controller with High and Low Side Drivers
The NCP1396 A/B offer everything needed to build a reliable and rugged resonant mode power
supply. Its unique architecture includes a 500 kHz Voltage Controlled Oscillator whose control
mode brings flexibility when an ORing function is a necessity, e.g. in multiple feedback paths
implementations. Thanks to its proprietary high-voltage technology, the controller welcomes a
bootstrapped MOSFET driver for half-bridge applications accepting bulk voltages up to 600 V.
Protections featuring various reaction times, e.g. immediate shutdown or timer-based event,
brown-out, broken opto-coupler detection etc., contribute to a safer converter design, without
engendering additional circuitry complexity. An adjustable deadtime also helps lowering the
shoot-through current contribution as the switching frequency increases. Learn more...
Order code: 1547111, 1547113
Glass Passivated Single-Phase Bridge Rectifier
Glass Passivated Single-Phase Bridge Rectifier with high surge current capability and high case
dielectric strength of 1500 VRMS which is ideal for printed circuit boards for general purpose use
in AC-to-DC bridge full wave rectification for monitor, TV, printer, switching mode power supply,
adapter, audio equipment, and home appliances application. Learn more...
Order code: 9549439, 9549447, 1021745, 9549455, 9549463
STripFET Power MOSFET
This Power MOSFET is the second generation of STMicroelectronics unique single feature size
strip-based process. The resulting transistor shows extremely high packing density for low
onresistance, rugged avalanche characteristics and less critical alignment steps therefore a
remarkable manufacturing reproducibility. Learn more...
Order code: 9512608RL, 9512608
Pulse Transformers
The 1000 series are intended for wideband and pulse operations. They are also suitable for signal
isolation and use in small isolated power supplies. The compact footprint makes them ideal for
applications where space is at a premium. Learn more...
Order code: 1087805, 1087806
LM3401 Hysteretic PFET Controller for High Power LED Drive
The LM3401 is a switching controller designed to provide constant current to high power LEDs.
The LM3401 drives an external P-MOSFET switch for step-down (Buck) regulators. The LM3401
delivers constant current within 6% accuracy to a wide variety and number of series connected
LEDs. Output current is adjusted with an external current sensing resistor to drive high power
LEDs in excess of 1A.
For improved accuracy and efficiency, the LM3401 features dual-side hysteresis, very low
reference voltage, and short propagation delay. A cycle by cycle current limit provides protection
against over current and short circuit failures. Additional features include adjustable hysteresis
and a CMOS compatible input pin for PWM dimming. Learn more...
Order code: 1495068
Quadruple Differential Line Driver
The AM26C31 is a differential line driver with complementary outputs, designed to meet the
requirements of TIA/EIA-422-B and ITU (formerly CCITT). The 3-state outputs have high-current
capability for driving balanced lines, such as twisted-pair or parallel-wire transmission lines, and
they provide the high-impedance state in the power-off condition. The enable functions are
common to all four drivers and offer the choice of an active-high (G) or active-low (G) enable
input. BiCMOS circuitry reduces power consumption without sacrificing speed. Learn more...
Order code: 4975637, 1648733, 9121129
15
Featured Application
Solutions
Street lighting, MR16s, Solar Power
signals, RGB colour mixing, Signalling,
more to come!
sg.element14.com/lightingsolutions