Академический Документы
Профессиональный Документы
Культура Документы
Q1
(a)
(b)
(4 marks)
A point charge of 9 C is located at point P (0, 2 m, 1 m), a uniform line charge with
density 170 nC/m lies along the x axis, and a uniform sheet of charge with density 26
nC/m2 lies in the z = 2 plane.
(i)
Calculate the total electric flux leaving the surface of a sphere of 6 m radius
centered at the origin.
(ii)
(6 marks)
(c)
(5 marks)
SEE 2523
3
Q2
(a)
(b)
(4 marks)
(c)
(i)
1 = 2 + 2 2 2 + 10
(2 marks)
(ii)
2 = sin + 2
(4 marks)
Two large parallel conducting plates are separated by a distance d and maintained at
potentials 0 for the lower plate and V0 for the upper plate. The region between the plates
is filled with a continuous distribution of electrons having a volume charge density
= 0 /. By assuming negligible fringing effect at the edges, determine
(d)
(i)
(6 marks)
(ii)
(5 marks)
(4 marks)
SEE 2523
4
Q3
(a)
Discuss the effects of the existence of dipole moments when a magnetic material was
immersed in a magnetic field.
(b)
(4 marks)
A cross section of coaxial cable centered along the z axis is shown in Fig. Q3. The
internal non magnetic conductor with radius a carries a uniform current I Ampere in the
direction of . The region < < is a magnetic material with permeability of 40 .
The outer conductor < < carries a uniform current of I Ampere but in the direction
of +.
(i)
(8 marks)
(ii)
Show that the Ampere circuital law of Maxwells equation in point form from
Q3(b)(i) is obeyed in the region < < .
(iii)
(4 marks)
(iv)
(5 marks)
Determine the force needed to split the outer conductor from the inner conductor.
(4 marks)
y
a
z
c
b
Fig. Q3
SEE 2523
5
Q4
(a)
By applying suitable equations, develop the boundary conditions for two magnetic
materials having permeability of 1 and 2 as shown in Fig. Q4. Assume the existence of
surface current (/) on the boundary surface.
(6 marks)
2
2
Fig. Q4
(b)
A first region ( < 0 and 1 =30 ) is separated from the second region ( >
0 and 1 =0 ) by a plane of = 0. Given that a magnetic field intensity in the first
region is 1 = 10 + /0 (A/m). A uniform surface current of = 8/0 (A/m) is
conducted on the x = 0 surface. Obtain:
(i)
(2 marks)
(ii)
the magnetic field intensity and magnetization vector in the second region.
(8 marks)
(iii)
(c)
(6 marks)
Will there be any changes in the magnetization vector in both regions if the magnetic
field intensity in the first region is not uniform; i.e 1 = + (). Explain your
answer.
(3 marks)
SEE 2523
6
(a)
(b)
(6 marks)
The square loop ABCD shown Fig. Q5 is immersed in a uniform magnetic field
B 0.5 y Wb/m 2 . The side CD of the loop cuts the flux lines at the angular frequency
120 rad/s. If the loop lies in the yz plane at time t = 0, determine:
(c)
(i)
(9 marks)
(ii)
(3 marks)
If everything is the same as in Fig. Q5, except that the magnetic field now is changed to
time varying, B 0.2ty Wb/m 2 , determine the emf at t = 1 ms.
(7 marks)
0.03m
C
R =1
0.02m
D
x
Fig. Q5
SEE 2523
7
Q6
(a)
(b)
(6 marks)
The electric field intensity of a linearly polarized uniform plane wave propagating in the
+z direction in seawater is = 50 cos 2 107 (/) at z = 0. The constitutive
parameters of seawater are = 72, = 1, = 4 (/), determine:
i)
(2 marks)
ii)
(3 marks)
iii)
(3 marks)
iv)
(2 marks)
v)
vi)