Академический Документы
Профессиональный Документы
Культура Документы
Form No ....
(for official use only)
1. Title of the Project: A Power Saver Device Controlled Over Android Application For Home,
Industries and Malls.
2. Discipline/ Subject Area: Engineering: Computer Science
3. Region (Regional Office area of jurisdiction: - Ajmer
4. Designation & Address of the Person, in whose name, Demand Draft/Bankers Cheque of
grant is to sent: Principal, Vivekananda Institute of Technology (East), Sector-36, NRI
Road, Sisyawas, Jagatpura, Jaipur-303012.
5. Name & Class/Year of the Students (indicate clearly the semester in case of semester
system):
Name
Branch
Year
Semester
th
Rahul Babel
Computer Science
4
7th
Shadan Nazir
Computer Science
4th
7th
Sameer Yadav
Computer Science
4th
7th
6. Whether belongs to SC/ST.(attach certified for Group Leader) : No.
7. No Address of the Students (Institutional & Correspondence Address with E-mail ID &
Fax, Mobile.):
Institute Address: Vivekananda Institute of Technology (East), Sector-36, NRI Road, Sisyawas,
Jagatpura, Jaipur-303012.
E-mail: info@vitej.ac.in, Fax: 0141-4077990, Tel: 0141-4077999
Student correspondence address:
Name
Rahul Babel
Shadan Nazir
Sameer Yadav
Address
4/248 Jawahar
Nagar Jaipur.
Girls Hostel VIT
Campus Sisyawas
Jaipur
Plot No.:- T20
Mahaveer Nagar
Durgapura Jaipur
302018 Rajasthan.
Email
rahulbabel2009@gmail.com
Mobile / landline
9461834142
shadannazir77@gmail.com
9413260964
sameeeryadav@gmail.com
9929038585
Address
e-mail id
Mobile / landline
172 Chetak Vihar
9828453240
Colony Behind apollo pankaj.c.vit@gmail.com
college of veterinary
medicine Agra Road
Jaipur- 302031
1 Rahul Babel
2 Shadan Nazir
3 Sameer Yadav
Name & Signature of the Students
Pankaj Chittora
Signature of Guide of the Project
CERTIFICATE
It is hereby certified that
(i) Institution takes the responsibility of implementing the Student Project Within stipulated
period.
(ii) The Institution shall provide the Infrastructural & other facilities required for the project.
(iii) The amount sanctioned by Department of Science & Technology, Rajasthan, Jaipur shall be
provided to the concerned Student/Guide timely and funds be utilized for the purpose for which
it has been sanctioned.
Date:
Place: Jaipur
From 1.4.2013 it is mandatory that all NGO/Voluntary Organizations to be certified from Plan
Department. Further information available on Website www:planning.rajasthan.gov.in.
In light of circular uploaded on Departmental Website for receiving Government Department.
Form B
Form No....
(For official use only)
Title of the Project: A Power Saver Device Controlled Over Android Application For Home,
Industries, and Malls.
Project Summary:
The project aims at designing a GSM Technology and Android based Power Saver
System. This device can save electricity. The device can be used in the homes as well as
in industries or malls etc. Device contains an android application which helps the user to
interact with the status of the used home appliance. Android application tells you that
which home appliance (fan, tube lights etc.) is switched on or switched off. You can
control your complete home, mall, industry consumption electricity with the help of an
android phone.
The controlling device for the automation in the project is a Microcontroller. The data
sent from Android phone over message will be received by GSM module connected to
Microcontroller. Microcontroller reads the data and decides the switching action of
electrical devices connected to it through Relay switches. Also, the status of home
appliance is continuously sent to android phone and can be monitored on android phone
screen.
Technical details of the Projects
Origin of the Proposal :
In particular monitoring power consumption of electricity can be of significance. As we
forgot to switch off the fan and light of the shop and came home then whole night there
is wastage of electricity. But using this device, it gives a 1automatic.
Notification to mobile phone that the fan and tube light is switched on, and then you
can switch off the fan and tube light with the help android application. So it can save
lots of electricity.
Definition of the problem :
Automation is the most frequently spelled term in the field of electronics. The hunger for
automation brought many revolutions in the existing technologies. We forgot to switch off
the electronic equipment and it leads to a great loss of electricity, so to this problem is try
to be overcome by this device which automatic tells you that which electronic equipment
are in ON state. And you can switch off them electronic equipment remotely with the help
of android phone.
Objectives :
The main objective of this project is to develop a smart Power Saver device. For homes,
malls, industries etc. In this project a remote monitoring system using GSM. The nodes
send data with the help of message to a particular phone no, which collects the data, stores
it and will allow it to be analyzed then displayed as needed on the android application.
Work Plan :
For this project, we studied wireless communication and GSM module and did deep study
on electrical equipment and Android. After this study we have find out latest techniques
which is used in this project. We studied Atmel microcontroller and embedded system,
Android system which are beneficial for the project. We designed our circuit on software.
After proper simulation of the circuit, we bought the required components and designed the
circuit on copper clad board. , we mounted the components on the PCB. After this we
designed a programming code and burned into microcontroller.
Methodology :
The system being developed is based on the GSM module in order to communicate to a selected
Phone no .The GSM module is connected to the microcontroller, and relay and switches are
connected to microcontroller .the microcontroller generate the signal according to the
electronic equipment are on or off, and sent to the GSM module. Then the message is
generated by the GSM module and the information in the message is send over the
particular phone no. The phone no. which have our devices android app, read that message
and display in a graphical mode on the android screen that which electronic equipment is
switched on or off.
Power supply
Micro
Controller
Relay
GSM Module
Reset
Relay
Crystal
Oscillator
ASM/ C
Program
Block Diagram
The Microcontroller was used to control the whole system, it monitors the Switches and
relay then the microcontroller will send the data to the GSM module, Microcontroller reads
the data and decides the switching action of electrical devices connected to it through Relay
switches. And further information is send to particular no. through GSM. Module Then the
message is received on the owner phone no. and then read by the android application
automatically. And status from the system is continuously sent to android phone and can be
monitored on android phone screen.
Work Done
Time Period
(in days)
1.
25 30
2.
5 10
3.
15 20
4.
Components purchasing
5.
15 20
6.
20 - 25
7.
PCB designing
15 20
8.
Hardware implementation
25 30
9.
Packaging
20 25
15
S.NO
Components
1.
Components
7500
2.
Minor Equipment
3500
3.
Consumable
750
4.
Report Writing
1500
5.
1250
6.
TOTAL
14500