Академический Документы
Профессиональный Документы
Культура Документы
ukbZyksu cqkksa dks Mkyus@cnyus ds fy;s vkSj cksYVksa ds lgh lajs[k.k ds fy;s fQk IYksV vkSj jsy ds gksy
,d lh/k esa gksuk pkfg;sA
fQk IySV ls jsy] fQk IySV ls uV cksYV o fQk IySV ls fQk IySV ds izfrjks/k dh tkap gj lIrkg djsaA
vPNs cSykLV izfrjks/k gsrq vPNh
ukyh dh O;oLFkk djsaA
ukyh
50 ,e,e
cj
Jss.kh
la;kstu
Vsu 'kUV izfrjks/k dk eku ,lh Vsd lfdZV gsrq 0-15 vkse o Mhlh Vsd lfdZV gsrq 0-5 vkse vkSj ;fn dkahV
Lyhij gksa rks 0-25 vkse ls de ugha gksuk pkfg;sA
fdlh Hkh [k.M esa fdlh Hkh izdkj ds Lyhij yxs gksus ij cSykLV izfrjks/k 2 vkse izfr fdeh ls de ugha gksuk
pkfg;sA
fdlh Hkh yEckbZ ds Vsd lfdZV ds fy;s jsy izfrjks/k 1 vkse izfr fdeh ls vf/kd ugha gksuk pkfg;sA
ladsr ,oa nwjpakj funskky;] m-v-izkS-dsU] Xokfy;j
Maharajpur, Gwalior
Fish plate holes /rail holes should not be in staggered way for smooth alignment to replace/
install nylon bushes.
Check the resistance between fish plate-rail, fish plate bolt, fish plate-fish plate weekly.
Maintain better drainage for
better ballast resistance.
Drainage
50 mm
Burr
Series
Connection
Train shunt resistance value should not be less than 0.15 ohm for AC track circuit and 0.5 ohm
for DC track circuit and 0.25 ohm provided with concrete sleepers.
Ballast resistance should not be less than 2 ohm per km in any section irrespective of sleeper
provided.
Rail resistance should not be more than 1 ohm per km irrespective of length of track circuit.
Voltage on track relay should be checked weekly.
Signal & Telecommunication Directorate, IRCAMTECH, Gwalior