Академический Документы
Профессиональный Документы
Культура Документы
42 CROSBY ST
02.19.15
221000
221000-01-0
E.M.
TRITON NOTE;
ENGINEER, PLEASE PROVIDE INFORMATION REQUIRED
ON PAGE 3 REGARDING PUMP SUCTION PRESSURE.
03-05-15
E. SHIPLEY
MS/BB
03/06/2015
Important:
Drawings are not to scale, use dimensions shown.
Do not fix foundation bolts rigidly until equipment is in place, since castings vary slightly in dimensions.
Seismic restraints and or calculations are not provided unless specifically noted below.
Sold To:
Engineer:
Rodkin Cardinale PC
System:
Marks:
42 Crosby Street
Sheet:
QTY
Ship To:
Demar Plumbing
C/O 42 Crosby Street
(Contractor to Confirm)
Date:
1/21/15
300-378
Of:
By:
R. DiLorenzo
2-
2-
4-
1-
Interconnecting piping and wiring. Headers are 3 304SS with flanged ends.
1-
1-
Set of pressure gauges, pressure switches and controls for automatic operation.
1-
Important:
Drawings are not to scale, use dimensions shown.
Do not fix foundation bolts rigidly until equipment is in place, since castings vary slightly in dimensions.
Seismic restraints and or calculations are not provided unless specifically noted below.
Pre-charged hydropneumatic tank 132 gallon, 125 PSIG working pressure ASME
(shipped loose), remote mounted. Contractor to make final connections and provide
isolation and drain valves.
ENGINEER
PLEASE PROVIDE
INFORMATION
42 Crosby Street
US-2722-137
Type:
Pump Model:
Nom. Speed:
Impeller Dia.:
Curve No.:
Market :
Page No : 1
Head - ft
150
NPSH - ft
Power - hp
Contact :
Phone :
Date :
Fax :
Wednesday, January 21, 2015
Item :
Impeller No.:
Fluid:
Temperature:
Viscosity:
Sp. Gravity:
Your Ref. :
D1
100
50
D3
90
80
70
60
50
40
30
20
10
1
SeePtslist
Water
F
68
1.007 cSt
1.000
Duty Flow
Efficiency - %
Project :
Quote No. :
Customer :
80 US gpm
Duty Head
130 ft
Imp. Dia.
5.62 inch
Power Required
4.7 hp
NPSH Required
5.1 ft
Efficiency
57.2 %
Peak Power
Closed Valve Head
Tolerance
6 hp
137.7 ft
Hyd InstPeerless Std
15
10
5
6
4
2
Comments
Flow
(US gpm)
30.6
43.7
56.9
70.0
83.2
96.3
109.5
122.7
135.8
50
100
Flow - US gpm
Head
(ft)
Efficiency
(%)
141.7
141.3
139.7
136.8
132.8
127.6
121.3
114.0
105.6
32.8
41.9
48.9
54.2
58.0
60.5
61.6
61.5
60.2
150
200
Power Required
(hp)
3.3
3.7
4.1
4.5
4.8
5.1
5.4
5.7
6.0
NPSH Required
(ft)
4.2
4.1
4.2
4.6
5.3
6.6
8.5
11.1
14.6
HEADER
SIZE
KEY
57"
1448mm
47"
1194mm
42 1/2"
1080mm
47 1/2"
1207mm
45"
1143mm
40"
1016mm
45"
1143mm
143 - 215JM
254 - 286JM
254 - 256JM
58"
1473mm
52"
1321mm
51"
1295mm
42"
1067mm
40"
1016mm
143 - 215JM
OW
D
OW (MAX)
BW
MOTOR
FRAME SIZE
DIMENSIONAL KEY
66" (1676mm)
44" (1118mm)
NOTES:
10 1/2" (267mm)
24" (610mm)
SEE CONTROL
PANEL
DRAWING
DESCRIPTION
REVISED HEADERS
DATE
ER
02/16/04
12"
DWG
NO.
CHK. BY:
P27-705-4V
6\QFUR)OR
Pump i n g S y s t em S o l u t i o n s
%HVW)ULHQG5RDG1RUFURVV*$)D[
DATE: 6/11/2003
REV.
NORCROSS, GEORGIA
NOT TO BE DUPLICATED WITHOUT
WRITTEN PERMISSION OR USED
IN ANY WAY DETRIMENTAL TO
THE COMPANY.
6\QFUR)OR,QF
PROPRIETARY DRAWING
Model CC Pumps
Materials of Construction
6700 Best Friend Rd. Norcross, Ga 30071 (770) 447-4443 Fax (770)447-0230
Bulletin: 28-128
7/01/2005
BULLETIN:
EFFECTIVE:
SUPERSEDES:
MECHANICAL
THERMAL
PURGE VALVE
OPERATION
To prevent overheating and pump failure a thermal
relief valve is installed in each pump casing, discharge
head, or discharge piping. The valve will automatically
sense the rise in temperature and discharge some of
the hot fluid allowing cooler fluid to enter the pump
casing. The valve will then close. On factory built
pump systems, the thermal relief valves are piped to a
common discharge tube. After installation, this
discharge tube should be continued to a nearby drain.
The discharge tube should be piped in a manner that
discharge or leaks are visible to maintenance personnel.
SPECIFICATIONS
Pressure Rating:
Temperature Setting:
600 psi
140 F
MATERIALS OF CONSTRUCTION
Body:
Internal Seal:
External Seal:
Spring:
Mounting Connection:
Tubing Connection:
Brass
Viton
Buna
Stainless Steel
3/8 MPT
1/4 FPT
6700 Best Friend Rd. Norcross, GA 30071 (770) 447-4443 Fax (770) 447-0230
28-184
JUNE 26, 2003
DEC. 13, 2000
DOMESTIC
PRESSURE REGULATING & CHECK VALVE ANGLE TYPE
6700 Best Friend Rd. Norcross, Ga 30071 (770) 447-4443 Fax (770)447-0230
Bulletin: 27-812.2 10/27/2005
Body:
Disc:
Seat:
Stem:
Materials of Construction
Cast Iron
Nylon 11 Coated Ductile Iron
EPDM
416 Stainless Steel
6700 Best Friend Road Norcross, GA 30071 Phone: 770-447-4443 Fax: 770-447-0230 http://www.syncroflo.com
Effective: August 4, 2010
Pressure Switch
STANDARD FEATURES
x
x
x
x
x
SPECIFICATIONS
Wetted Materials:
Operating Temp.:
Set Point:
Proof Pressure:
Enclosure:
6700 Best Friend Rd. Norcross, Ga 30071 (770) 447-4443 Fax (770)447-0230
Bulletin: 29-124
6/30/2005
Features
x High Accuracy
x High Strength Stainless Steel Construction
x No Silicone Oil. No Internal O-rings, no welds
(50 PSI & above)
x Wide operating temperature range
x Fully welded case provides rugged design
x Compatible with wide range of gases and liquids
x Suitable for high shock and vibration applications
x Superior signal clarity compared to analog
transmitters
PHYSICAL DESCRIPTION
Wetted Material: 17-4PH stainless steel NACE compatible
Electrical Cable
Connection: 304 stainless steel
Case (housing):
ELECTRICAL DATA
Excitation: 10-28VDC, Typ.
Output: Digital Pulse
Current Consumption: <15mA
Bandwidth: (-3dB): DC to 250Hz
Zero Offset: <1% of FS
Span Tolerance: <1.5% of FS
Output Noise: <2mV RMS
Reverse Polarity Ye
Protection:
6700 Best Friend Road Norcross, GA 30071 Phone: 770-447-4443 Fax: 770-447-0230 http://www.syncroflo.com
Effective: August 4, 2010
0.5 to 400Hz
0.01HZ
Frequency Accuracy
Starting Torque
Acceleration / Deceleration Time Setting
DC Injection Brake
Stall Prevention Operation Level
Operational Environment
Ambient Temperature
Ambient Humidity
Storage Temperature
-20C to +65C
Atmosphere
Altitude, Vibration
6700 Best Friend Road Norcross, GA 30071 Phone: 770-447-4443 Fax: 770-447-0230 http://www.syncroflo.com
Effective: August 9, 2010
SyncroFlo
P ump i n g S y s t em S o l u t i o n s
6700 Best Friend Road - Norcross, GA 30071
(770) 447-4443 - Fax (770) 447-0230
P ump i n g S y s t em S o l u t i o n s
6700 Best Friend Road - Norcross, GA 30071
(770) 447-4443 - Fax (770) 447-0230
SyncroFlo
SyncroFlo, Inc.
SyncroFlo, Inc.
SyncroFlo
P ump i n g S y s t em S o l u t i o n s
6700 Best Friend Road - Norcross, GA 30071
(770) 447-4443 - Fax (770) 447-0230
Model 132
HYDROCUMULATOR TANK
Features and Benefits
1. The vessel is ASME code
(Section 8. Div. 1, UG 90 C-2) and
NB stamped for 125 PSIG*.
Maximum temperature is 240 F
(consult the factory for higher
temperatures). Nominal volume
is 132 gallons.
2. The tanks shell is made of Steel.
The bladder is FDA approved
Heavy Duty Butyl.
3. The 100% draw down design of
the tank prevents the bladder from
rupturing at any storage volume
or pressure within its ratings. This
provides maximum water storage
at all conditions.
4. The vertical design and bottom
water connection eliminate water
stagnation in the tank, making it
ideal for drinking water use.
5. The specially designed distribution
tube allows the tank to be fully
pre-charged with air at the factory.
6. Water is kept inside the bladder
while air is between the bladder and
the tank shell. This keeps water rust
free and protects the tank from corrosion.
7. Tank dry weight: 330 Lbs.
* Available in higher pressures ( 150, 200, 250 PSIG )
6700 Best Friend Rd. Norcross, Ga 30071 (770) 447-4443 Fax (770)447-0230
Bulletin: 28-153.3 7/20/2007
Supersedes: 10/02/06
WARRANTY
The components of each SyncroFlo water pressure booster system, when purchased as regular
factory selections, are warranted against failure due to defects in design, material, or construction,
from date of factory shipment within the periods and under the conditions noted below:
PUMPS
All SyncroFlo pumping assemblies are warranted against mechanical failure for a period of one
(1) year. If any component of the pumping assembly fails within this period, SyncroFlo, Inc., will,
at its option, repair or replace the pumps assembly on a no charge exchange basis FOB factory,
Atlanta, Georgia.
MOTORS
Motors, when equipped with standard SyncroFlo over-temperature protection systems and
maintained according to factory instructions, are warranted for one (1) year. SyncroFlo, Inc., will
make, at its option, a no charge repair or replacement at the factory or at an authorized motor
service station.
PRESSURE REGULATING VALVES
Pressure regulating valves are warranted for one (1) year. If any mechanical component of the
regulating valve fails within this period, SyncroFlo, Inc., will, at its option, repair or replace
regulating valve component parts on a no charge exchange basis FOB factory.
COMPLETE SYSTEM
The complete SyncroFlo system as a whole, including all accessories and components not
mentioned above, is warranted functionally and mechanically for a period of one (1) year from
date of installation or 18 months from date of shipment (whichever comes first), when
installed, operated, and maintained in accordance with the Companys recommendations.
SyncroFlo, Inc., is responsible only for repairing or replacing its products in accordance with the
terms and conditions set forth above. There are no warranties, either expressed or implied,
extending beyond those stated on the face hereof, and SyncroFlo, Inc., expressly disclaims all
other warranties, including any implied warranties of mechanical ability or fitness for a particular
purpose. SyncroFlo, Inc., also disclaims any liability whatsoever for incidental or consequential
damages, including damages to property, damages for loss of use, loss of time, loss of profits, loss
of income, or any other incidental or consequential damages. SyncroFlo, Inc., neither assumes
nor authorizes any other person to furnish any warranties, or assume for it any liability in
connection with the sale of its products.
This warranty does not include mechanical seals, gauges, transportation, or labor costs for
exchange or installation of repaired or replaced material. Final determination of warranty shall be
made only by the factory upon return and inspection of returned material. No material is to be
returned without a return material authority (RMA) tag which may be obtained by calling or
writing the factory, advising what will be shipped and the reason for the return.