Академический Документы
Профессиональный Документы
Культура Документы
ASSIGNMENT
1. Cement Pointing 1:4 units 1 Sq m for 100 Sqm.
2. Cement plastering with thickness of 12 mm with coarse sand for 100 Sqm.
Cement Pointing: is the act or process of repairing or finishing joints in brick works, masonry
etc with mortar or lime.
Types of Pointing
Flush pointing
Ruled pointing
Weather or truck pointing
Raised or trucked pointing
Plastering: process of coating and covering the wall or ceiling by plaster. It can be made dry or
wet as per requirement.
Some of the Points is be consider while measurements pointing and plastering.
side.
Opening more than 3 m shall be deducted from side but jamba, sofits, are added.
Plastering at a heights greater than 10 m above ground level shall be measured separately
in stage of 5 m meter height for out side
No deductions shall be made for end of joints, beam, post etc up to 0.5 Sqm and to no
additional is made for jambs, sofits, sills etc
Various types and proportion of pointing shall be measurement separately.
Standard Specification
Schedule of Rates (SOR) of Rajasthan Urban Infrastructure Development Projects (RUIDP)
2011
Sno
1
2
Description
Sand Coarse
Cement OPC
Mason
Item code
M-005
M-081
Unit
Cum
Tones
Rates
525.00
5400.00
L-11
Per day
300.00
L-14
Per day
200.00
Mazdoor/ helper
4
Since the volume of 1 bag of cement is 0.0347 m3, so the number of bag of cement will be
calculated as:
For cement mortar in pointing of 1:4, the quantity calculated will be as below:
Sand quantity: = 1.6 X 4 / (1+4) = 1.12 cum
Quantity of cement (in bags):
Volume of cement = 1 X 1.6 / (1 + 4) = 0.32 cum
There number of bags required = Vol. of cement / vol. of sand = 1.12 / 0.32 = 3.5 bags.
Therefore 3.5 bags of cement for unit volume of pointing or 3.5 X 50 kg(weight per bag) = 175
kg for 1 cum
For 100 Sqm of pointing with 6 mm of thickness 10 X 10 X 0.006 (say) = 0.60 cum
Weight of cement 175 X 0.60 = 105.0 kg or 0.105 tones
For 100 cum of Plaster with 12mm thickness 10 X 10 X .012 (thickness of Plaster) = 1.2 cum
Weight of cement 175 X 1.2 = 210 kg or 0.210 tones
\Estimation of Labour and Tools for cement mortar:
For 1m3 of cement mortar, semi-skilled labour is required for 0.27 days for mixing, unskilled
labour for 0.26 for carrying of cement, sand and water. Hire charges for mechanical mixer is
taken in lumpsum of can be taken as 0.27 days for mixing 1cum of mortar.
Abstract
Description of
S no.
Quantity to
Unit
item
1
Cement Pointing
1.1
Cement OPC
Amount
Rate
be execute
Tones
0.105
(Rs)
5400.00
567.00
1.2
Sand Coarse
cum
0.672
525.00
352.80
(I)
919
Miscellaneous
12% of
work (Mason,
(A) prime
1.3
110.28
Helper ,
cost of
Machinery)
work
(B)
1029.28
Cement Plaster
Sqm
2.1
Cement OPC
Tones
0.210
5400.00
1134.00
2.2
Sand Coarse
Cum
1.344
525.00
7056.00
(II)
8190.60
Miscellaneous
12% of
work (Mason,
(A) prime
1.3
982.800
Helper ,
cost of
Machinery)
work
Total (B)
9173.40
Conclusion
For cement pointing of 100 Sqm Rate would be 1029.28
Cement Plastering will completed within Rs 9173.40
Readings
SOR Rajasthan Urban Infrastructure Development Projects (RUIPD)
Estimation and costing by B.N. Dutta
NICMAR Lesson book
Hand book Civil Engineering