Академический Документы
Профессиональный Документы
Культура Документы
4D SYSTEMS
4D-AN-P4005
Description
Content
The user is familiar with the Workshop 4 environment and with the
fundamentals of ViSi-Genie, as described in Workshop 4 User Guide
and ViSi-Genie User Guide;
The user has completed a first project like the project described in
4D-AN-P4001 Getting Started First Project with ViSi-Genie.
2012 4D Systems
Page 2 of 23
Description ...................................................................................................... 2
Content ........................................................................................................... 2
Application Overview ...................................................................................... 3
Setup Procedure ............................................................................................. 3
Launch ViSi-Genie .................................................................................... 3
Load the Example .................................................................................... 4
Create a New Project ............................................................................... 6
The Image Object .......................................................................................... 10
Add an Image Object ............................................................................. 10
Move the Image .................................................................................... 12
Resize the Image.................................................................................... 14
Edit the Image ............................................................................................... 15
Crop the Input Image............................................................................. 16
Resize the Ouput Image......................................................................... 17
Change the Image ................................................................................. 19
Confirm or Discard the Changes ............................................................ 20
Build and Upload the Project ........................................................................ 21
Proprietary Information ................................................................................ 23
Disclaimer of Warranties & Limitation of Liability ........................................ 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
Application Overview
Setup Procedure
Launch ViSi-Genie
There is an alias for 4D Workshop on the desktop:
This application note describes how to add an Image object and how to
customise it.
2012 4D Systems
Page 3 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
To load the existing project, click on the left-most icon Open
2012 4D Systems
Page 4 of 23
www.4dsystems.com.au
4D SYSTEMS
select P4006 Show Image 1 and click on
4D-AN-P4005
to load it.
Now, check the type of the screen module: select the Project menu
and confirm by
2012 4D Systems
Page 5 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
Click on the icon close to Create a New Project on top or, if the
settings have been already defined, click on the icon close to Create
a New Project on bottom:
2012 4D Systems
Page 6 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
All those options update the main window with the selection of the screen:
2012 4D Systems
Page 7 of 23
www.4dsystems.com.au
4D SYSTEMS
To set it to landscape, just click on the image of the screen to rotate it:
4D-AN-P4005
The main window now asks for the kind of project:
2012 4D Systems
Page 8 of 23
www.4dsystems.com.au
4D SYSTEMS
To select ViSi Genie, just click on the blue arrow:
4D-AN-P4005
The development environment is now displayed:
2012 4D Systems
Page 9 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
The standard Windows Open file appears and asks for an image:
2012 4D Systems
Page 10 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
Select the folder, here French Alps, and the picture, here IMG_0480 with a
lovely view of the Mont Blanc
2012 4D Systems
Note that the image is in a square in the middle of the screen and that the
proportions are not consistent with the original ones.
Page 11 of 23
www.4dsystems.com.au
4D SYSTEMS
The Object Inspector displays the properties of the Image object:
4D-AN-P4005
Either use the keyboard and edit two properties on the Object
Inspector, Left and Top :
o Select the Left line, enter 0 and press Enter
2012 4D Systems
Page 12 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
2012 4D Systems
Page 13 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
To resize the image, first select the Image object by clicking on it; red dots
appear around the image:
Or use the mouse, click on the bottom-left red dots and resize the
image to fill all the screen:
Because the screen used for this application note is 320 x 240, maximal
height is 240 pixels and maximal width is 320 pixels. Those values may
change depending on your specific screen. Please refer to the specification
sheet of your screen.
Then, two options:
use the keyboard and edit two properties on the Object Inspector,
Height and Width :
o Select the Height line, enter 0 and press Enter
2012 4D Systems
Page 14 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
A new window Image Video Converter appears and provides all the
parameters for the image:
On the left side, the input image; on the right, the output image.
2012 4D Systems
Page 15 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
Cropping part the input image is possible by
The left side provides all the information about the input image:
Entering new values for Left, Top, Width and Height under
Selection Window in Input:
2012 4D Systems
Page 16 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
Cropping the input image can also be done by changing the Height, Left,
Top and Width properties under Source on the Object Inspector:
Because the screen used for this application note is 320 x 240, maximal
height is 240 pixels and maximal width is 320 pixels. Those values may
change depending on your specific screen. Please refer to the specification
sheet of your screen.
2012 4D Systems
Page 17 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
Entering new values for Width and Height under Image | Actual
Size | Output:
2012 4D Systems
Page 18 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
Back to full screen for the output image increases the estimated size from
52 KB to 150 KB:
The standard Windows Open file appears and asks for an image:
2012 4D Systems
Page 19 of 23
www.4dsystems.com.au
4D SYSTEMS
The Image Video Converter shows the new image:
4D-AN-P4005
The WYSIWYG screen now shows the flowers:
to accept or
Page 20 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
Then select the Project menu
2012 4D Systems
Page 21 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
2012 4D Systems
Page 22 of 23
www.4dsystems.com.au
4D SYSTEMS
4D-AN-P4005
Proprietary Information
The information contained in this document is the property of 4D Systems Pty. Ltd. and may be the subject of patents pending or granted, and must not be
copied or disclosed without prior written permission.
4D Systems endeavours to ensure that the information in this document is correct and fairly stated but does not accept liability for any error or omission. The
development of 4D Systems products and services is continuous and published information may not be up to date. It is important to check the current
position with 4D Systems.
All trademarks belong to their respective owners and are recognised and acknowledged.
Page 23 of 23
www.4dsystems.com.au