Академический Документы
Профессиональный Документы
Культура Документы
10
EXTENDED
GUARANTEE
YEARS
Steel panel radiators PERIOD
10
YEAR
GUARANTEE
05/2008
j o i n t s t o c k c o m p a n y
Radik RADIATORS
Radik – LINE OF PRODUCTS
Radik plan Klasik Radik plan vk Radik plan vkl Radik plan vkm
Radik RADIATORS
TABLE OF CONTENTS
GENERAL INFORMATION – RADIK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
RADIK KLASIK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
RADIK VK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
RADIK VKU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
RADIK VKL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
RADIK VKM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
RADIK hygiene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
HEAT OUTPUT – RADIK KLASIK, RADIK VK, RADIK VKU, RADIK VKL.. . . . . . . . . . . . . . . . . 28
HEAT OUTPUT – RADIK PLAN KLASIK, RADIK PLAN VK, RADIK PLAN VKL . . . . . . . . . . . . 41
SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
RADIK radiators are steel panel radiators with a natural RADIK steel panel radiators are manufactured in four basic
circulation of air around their panel. They are produced in versions which come in individual models.
single, double or triple panel form. The outer panel is made Basic versions of RADIK steel panel radiators:
of a shaped plate with horizontal and vertical depressions.
To increase heating performance some types of radiators • KLASIK
are provided with a convector plate, welded to the vertical – radiators with side connections and a corrugated
waterways of the panel. front panel.
The panel is made of two stamped steel sheets welded • VENTIL KOMPAKT
together with a seam weld on the perimeter and with a spot
– radiators with bottom connections and a corrugated
weld where the depressions are. The cold-rolled steel sheet
front panel.
used has a low content of carbon, corresponding to class
FePO1 in accordance with EN 10130 and EN 10131. • PLAN
– radiators with side connections (KLASIK version)
or bottom connections (VENTIL KOMPAKT
version) and a smooth front panel.
• hygiene
– radiators without convector fins, side panels and
top grill, with side or bottom connections and with
smooth front panel
RADIK
RADIK steel panel radiators are designed for central
heating systems in buildings with the highest allowed working • KLASIK version
pressure of 10 bar where water or water solutions are – RADIK KLASIK model
used as the heating medium. The highest allowed working • VENTIL KOMPAKT version
temperature is 110 °C. RADIK radiators are designed for
single-tube or double-tube systems with pressurized or – RADIK VK model
gravity-fed circulation. The properties of the heating medium – RADIK VKU model
must be in compliance with the norm ČSN 07 7401. Low – RADIK VKL model
water content in the radiator enables a flexible reaction of – RADIK VKM model
the heating system to the required room temperature and – RADIK combi vk model
an effective thermoregulation. • PLAN version
RADIK steel panel radiators in the version PLAN have – RADIK PLAN KLASIK model
a special design which will fit in every room interior and – RADIK PLAN VK model
will satisfy even the most demanding customer and home – RADIK PLAN VKL model
designer. – RADIK PLAN VKM model
RADIK steel panel radiators in the version HYGIENE are • hygiene version
designed for rooms with high demands on hygiene and
– RADIK HYGIENE model
cleanness. These radiators have been tested in an accredited
– RADIK HYGIENE VK model
laboratory and obtained the hygiene certificate for usage in
health service and similar services.
Overview of types
Identification Number of
Type number Number of panels
convector plates
Our products are identified by:
Type 10 1 0
• a print on the radiator packaging
Type 11 1 1
• a label with bar code on the radiator packaging Type 20 2 0
• a company logo stamped on the end panels Type 21 2 1
Type 22 2 2
• an inkjet print with the manufacturing date and time on Type 30 3 0
the rear side of the plate Type 33 3 3
All RADIK steel panel radiators except the model RADIK All steel panel radiators are delivered in uniform packaging,
VKU and the types 21 PLAN VKL, 22 PLAN VKL, 33 PLAN which consists of:
VKL have two upper and lower hangers welded on the back. • corrugated cardboard
Radiators with length 1800 mm and longer have six welded
hangers. • reinforcinng corners of the package plastic covers
All radiators are equipped with an air vent. KLASIK • polyethylene shrinking foil
radiators have one and VENTIL KOMPAKT two blanking The packaging protects the radiator during transportation,
plugs. All connections of RADIK steel panel radiators have handling, assembly and after assembly. It should not
the same diameter with a G 1/2 internal thread. be removed before the installation and other work is
Except the types 10, 10VK, 10 VKL, 10 VKM and the completed.
models RADIK HYGIENE and RADIK HYGIENE VK, all other
models are delivered with end panels and top grills fitted.
Except the model RADIK VKU and the types 21 PLAN VKL,
22 PLAN VKL, 33 PLAN VKL are delivered with the respective
number of mounting brackets type 15/120, 15/100/70, 18/120
or Z-U320 (see the KORAMONT catalogue).
Related norms
ČSN EN 442
DIN EN 442
ČSN 06 1101
ČSN 06 1122
ČSN 06 0310
ČSN 07 7401
DIN 55 900
BS EN 442
• use a compact connecting fitting with a pitch of 50 mm • allows presetting of water flow at six levels -factory preset
and with reduction of G 1/2 to G 3/4 by setting appropriate for position six
clamping screws according to the material and size of • to preset to another position a special key is required
connecting pipes
• if any other preset position is needed, the installer should
2) black steel pipes with tubular threading do it after rinsing the installation but before the heat
• use 2 closing screws comes on
• the valve is tightened at the factory to their norm
• outside connecting thread M 30 x 1.5
• the connecting thread of the valve has a white plastic
cover, which gives it protection during transportation and
assembly of the radiator and at the same time can be
used for setting the valve in the off or on position during
assembly
To set and regulate the temperature in a room it is necessary With connecting thread M 30 x 1.5. Below is an overview
to fit a thermostatic head on the VENTIL KOMPAKT radiators. of the basic types made by different manufactures for the
For direct fitting only thermostatic heads can be used. Czech market. For information about other makes, please,
contact the manufacturer or their representative on the
market concerned.
1 2 3 4 5 6
7 8 9 10 11 12
13 14 15 16 17 18
Example of calculation
Q 960
Solution: weight flow m = = = 55 kg/h
c . (t1 - t2) 1,163 . 15
Level 3 presetting
Table
Example of calculation
Solution to: pressure loss when using a radiator with valve including Vekolux fitting
Given: heat output of the circuit Q = 4380 W
cooling of water t1 - t2 = 20 K (70/50 °C)
share of radiator mot =
^
50%
heat capacity of water c = 1,163 Wh/kg.K
Q 4380
Solution: weight flow in the circuit mR = = = 188 kg/h
c . (t1 - t2) 1,163 . 20
level 6 presetting
12 The company reserves the right to make technical changes.
Radik GENERAL INFORMATION – Ventil kompakt
One-pipe heating system
Table
*) For setting at 35% close Vekolux and then open by turning it round 3.5 times.
Maximum opening corresponds to 50% share of radiator.
Overview of types
Technical Data
Overview of types
Technical Data
right bottom
ϕ=1
Overview of types
Technical Data
right bottom
ϕ=1
left bottom
ϕ=1
Overview of types
Technical Data
left bottom
ϕ=1
Overview of types
Technical Data
right bottom
ϕ=1
Position of radiator
X6 345 445
Notice: Notice:
The values X1 and X2 are dependent on the type of the When ordering the RADIK COMBI VK it is necessary to
actually used mounting bracket. quote the article code of the radiator (see please p. 54) and
of the electrical heating element.
Overview of types
Technical Data
L/2
Height H.................................... 300, 400, 500, 600, 900 mm L
Depth B
Type 11 VKM
Type 10 VKM............................................................... 47 mm
Type 11 VKM............................................................... 63 mm
B
Type 20 VKM............................................................... 66 mm
Type 21 VKM............................................................... 66 mm Type 20 VKM
Type 22 VKM............................................................. 100 mm
Type 33 VKM............................................................. 155 mm
B
Connecting pitch.......................................................... 50 mm
Connecting thread...........................................6 x G1/2 inside Type 21 VKM
Highest allowed working pressure................................10 bar
B
Type 33 VKM
middle connection
ϕ=1
B
Overview of types
Technical Data
Examples of connection to the heating system Example of connection to the heating system
18
The company reserves the right to make technical changes. 21
Radik plan vK
Description
Overview of types
Technical Data
Depth B
Type 11 PLAN VK.....................................................65 mm
Type 21 PLAN VK.....................................................68 mm
Type 22 PLAN VK...................................................102 mm
Type 33 PLAN VK...................................................157 mm
Connecting pitch........................................................50 mm
Connecting thread...................................... 6 x G 1/2 inside
Highest allowed working pressure............................. 10 bar
Highest allowed working temperature........................110 °C
Radiator connection...........................................right bottom
right bottom
ϕ=1
Overview of types
Technical Data
Depth B
Type 11 PLAN VKL...................................................65 mm
Type 21 PLAN VKL...................................................68 mm
Type 22 PLAN VKL.................................................102 mm
Type 33 PLAN VKL.................................................157 mm
Connecting pitch........................................................50 mm
Connecting thread...................................... 6 x G 1/2 inside
Highest allowed working pressure............................. 10 bar
Highest allowed working temperature........................110 °C
Radiator connection.............................................left bottom
left bottom
ϕ=1
Overview of types
50
Technical Data L/2
L
Height H.................................... 300, 400, 500, 600, 900 mm
Length L...........................................400, 500, 600, 700, 800, Type
Typ 1111 PLAN
PLAN VKM VKM
................................................ 900, 1000, 1100, 1200, 1400,
.............................................................1600, 1800, 2000 mm
Depth B
Type 11 PLAN VKM..................................................... 65 mm Type
Typ 2121 PLAN
PLAN VKM VKM
Type 21 PLAN VKM..................................................... 68 mm
Type 22 PLAN VKM................................................... 102 mm
Type 33 PLAN VKM................................................... 157 mm
Connecting pitch.......................................................... 50 mm
Connecting thread...........................................6 x G1/2 inside Type
Typ 2222 PLAN
PLAN VKM VKM
Highest allowed working pressure................................10 bar
Highest allowed working temperature..........................110 °C
Radiator connection.................................middle connection
Type
Typ 3333 PLAN
PLAN VKM VKM
Example of connection to the heating system
middle connection
ϕ=1
right bottom
ϕ=1
Type 30 Hygiene VK
t1 t2 Air temperature in room ti Heat output of individual types of RADIK radiators have
been measured in nominal operating (temperature) conditions
[°C]
[°C]
10 °C 12 °C 15 °C 18 °C 20 °C 22 °C 24 °C of 75/65/20 °C (t1 / t2 / ti) via EN‑442:
80 0,57 0,59 0,62 0,65 0,68 0,70 0,73 • temperature of incoming water t1 = 75 °C
70 0,62 0,65 0,68 0,73 0,76 0,79 0,83 • temperature of return water t2 = 65 °C
95
60 0,69 0,72 0,77 0,83 0,87 0,91 0,96
• relative temperature of air ti = 20 °C
50 0,79 0,83 0,89 0,96 1,02 1,08 1,15
Corresponding heat outputs for other operating conditions,
80 0,59 0,61 0,64 0,68 0,71 0,74 0,77
as listed in this catalogue, were calculated from the established
75 0,62 0,64 0,68 0,72 0,75 0,78 0,82
measurements (for the temperature ranges 90/70 °C, 70/55 °C,
70 0,65 0,67 0,72 0,76 0,80 0,83 0,87 and 55/45 °C and for room air temperatures of 15, 20 and
90 65 0,68 0,71 0,76 0,81 0,85 0,89 0,93 22 °C).
60 0,72 0,76 0,81 0,87 0,91 0,96 1,01
If a radiator is intended for use in a heating system with
55 0,77 0,81 0,87 0,93 0,98 1,04 1,10 other temperature conditions, it is necessary to make a
50 0,83 0,87 0,93 1,01 1,07 1,14 1,21 conversion as follows:
75 0,64 0,67 0,71 0,75 0,79 0,82 0,86
Q = Qc . f
70 0,68 0,70 0,75 0,80 0,84 0,88 0,92
When: Q – calculated need for heat output of the radiator
85 65 0,72 0,75 0,80 0,85 0,89 0,94 0,99
at 75/65/20 °C
60 0,76 0,79 0,85 0,91 0,96 1,01 1,07
Qc – heat loss of the room
55 0,81 0,85 0,91 0,98 1,04 1,10 1,16
f – conversion coefficient from the table (applies to
70 0,71 0,74 0,79 0,84 0,88 0,93 0,97
the heat Temperature exponent n = 1,3)
65 0,75 0,78 0,84 0,90 0,94 0,99 1,05
In the table of heat outputs for heating conditions of
80 60 0,80 0,83 0,89 0,96 1,01 1,07 1,13
75/65/20 °C we find for the calculated value Q the suitable
55 0,85 0,89 0,96 1,04 1,10 1,16 1,24
radiator with the appropriate output.
50 0,91 0,96 1,04 1,13 1,20 1,28 1,37
65 0,79 0,82 0,88 0,95 1,00 1,05 1,12
60 0,84 0,88 0,94 1,02 1,08 1,14 1,21 EXAMPLE:
75 Problem:
55 0,89 0,94 1,01 1,10 1,17 1,24 1,32
50 0,96 1,01 1,10 1,20 1,28 1,37 1,47 For a room with a reguired air temperature of 22 °C and
60 0,88 0,93 1,00 1,08 1,15 1,22 1,30 heat loss of 810 W, we want to use a RADIK KLASIK radiator.
55 0,94 0,99 1,08 1,17 1,25 1,33 1,42 The heating system will be operated with a temperature
70 range of 60/50 °C.
50 1,01 1,07 1,17 1,28 1,37 1,47 1,58
45 1,10 1,16 1,28 1,42 1,52 1,64 1,79 Given:
55 1,00 1,05 1,15 1,26 1,34 1,43 1,54 • temperature conditions:
50 1,08 1,14 1,25 1,37 1,47 1,59 1,71 temperature of incoming water t1 = 60 °C
65
45 1,17 1,24 1,37 1,52 1,64 1,78 1,94 temperature of return water t2 = 50 °C
40 1,28 1,37 1,52 1,71 1,87 2,05 2,27 relative temperature of air ti = 22 °C
55 1,07 1,13 1,23 1,36 1,45 1,56 1,68 • heat loss of the room Qc = 810 W
50 1,15 1,22 1,34 1,48 1,60 1,73 1,87 Solution:
60
45 1,25 1,33 1,47 1,65 1,78 1,94 2,13 For working conditions of 60/50/22°C we find in the table
40 1,37 1,47 1,64 1,86 2,03 2,24 2,50 the coefficient value:
50 1,23 1,31 1,45 1,62 1,75 1,90 2,07 f = 1,73
45 1,34 1,43 1,60 1,80 1,96 2,15 2,37 Q = 810.1,73 = 1401 W
55
40 1,47 1,59 1,78 2,03 2,24 2,48 2,78
For the calculation of value Q we find in the table of heat
35 1,64 1,78 2,03 2,36 2,64 2,99 3,43
outputs for 75/65/20 °C (pages 30, 31) the right radiator. From
45 1,45 1,56 1,75 1,98 2,17 2,40 2,67 the broad range of types and sizes of RADIK KLASIK one
40 1,60 1,73 1,96 2,25 2,50 2,79 3,15 could, for example, choose one of the following radiators:
50
35 1,78 1,94 2,24 2,63 2,96 3,38 3,92 Type 11 – 600 x 1400...................................... 1403 W
30 2,03 2,24 2,64 3,20 3,70 4,39 5,39
Type 21 – 600 x 1100...................................... 1417 W
40 1,75 1,90 2,17 2,53 2,83 3,19 3,66
Type 22 – 500 x 1000...................................... 1452 W
45 35 1,96 2,15 2,50 2,96 3,37 3,89 4,58
30 2,24 2,48 2,96 3,63 4,25 5,11 6,38
35 2,17 2,40 2,83 3,41 3,93 4,62 5,54
40
30 2,50 2,79 3,37 4,21 5,01 6,14 7,87
Notice:
The maximal output of the electrical heating element P [W] is dependent on the particular type and size of the radiator and
must not be exceeded in any case.
ype 11 PLAN
T ype 21 PLAN
T Type 22 PLAN ype 33 PLAN
T
15 °C Type 11 PLAN VK
Type 11 PLAN VKL
Type 21 PLAN VK
Type 21 PLAN VKL
ype 22 PLAN VK
T
Type 22 PLAN VKL
Type 33 PLAN VK
Type 33 PLAN VKL
ype 11 PLAN
T ype 21 PLAN
T ype 22 PLAN
T ype 33 PLAN
T
20 °C Type 11 PLAN VK
Type 11 PLAN VKL
Type 21 PLAN VK
Type 21 PLAN VKL
Type 22 PLAN VK
Type 22 PLAN VKL
Type 33 PLAN VK
Type 33 PLAN VKL
ype 11 PLAN
T ype 21 PLAN
T ype 22 PLAN
T ype 33 PLAN
T
22 °C Type 11 PLAN VK
Type 11 PLAN VKL
Type 21 PLAN VK
Type 21 PLAN VKL
Type 22 PLAN VK
Type 22 PLAN VKL
Type 33 PLAN VK
Type 33 PLAN VKL
15 °C Type 11 PLAN VKM Type 21 PLAN VKM Type 22 PLAN VKM Type 33 PLAN VKM
20 °C Type 11 PLAN VKM Type 21 PLAN VKM Type 22 PLAN VKM Type 33 PLAN VKM
22 °C Type 11 PLAN VKM Type 21 PLAN VKM Type 22 PLAN VKM Type 33 PLAN VKM
15 °C
Type 10 hygiene Type 20s hygiene Type 30 hygiene
Type 10 hygiene vk Type 20s hygiene vk Type 30 hygiene vk
20 °C
Type 10 hygiene Type 20s hygiene Type 30 hygiene
Type 10 hygiene vk Type 20s hygiene vk Type 30 hygiene vk
22 °C
Type 10 hygiene Type 20s hygiene Type 30 hygiene
Type 10 hygiene vk Type 20s hygiene vk Type 30 hygiene vk
Temperature exponent n [-] 1,3319 1,3193 1,3068 1,2942 1,3083 1,3156 1,3140 1,3123 1,3107 1,3206 1,3005 1,3014 1,3548
Radiator weight [kg/m] 6,38 8,40 10,41 12,43 19,20 10,42 14,15 17,87 21,60 32,80 21,47 25,70 38,70
Watter volume [l/m] 1,9 2,3 2,7 3,1 4,3 1,9 2,3 2,7 3,1 4,3 5,1 5,8 8,3
2 -5 -5 -4
Flow coefficient AT [m ] 6,5 x 10 (DN 15) 6,5 x 10 (DN 15) 1,0 x 10 (DN 15)
Resistance coefficient ξT [-] 19,0 (DN 15) 19,0 (DN 15) 8,5 (DN 15)
Stated values for the flow coefficient AT and the coefficient of resistance ξT apply only to the model RADIK KLASIK.
Radik VKm
Height H [mm] 300 400 500 600 900 300 400 500 600 900 300 400 500 600 900
Standard heat output [W/m] 375 476 572 665 922 533 683 831 979 1432 934 1080 1502
Temperature exponent n [-] 1,2945 1,3013 1,3081 1,3149 1,3331 1,2583 1,2772 1,2962 1,3151 1,3291 1,3093 1,3160 1,3456
Radiator weight [kg/m] 6,90 8,77 10,63 12,50 18,50 10,29 13,48 16,67 19,86 31,00 21,50 25,42 37,50
Watter volume [l/m] 1,9 2,3 2,7 3,1 4,5 1,9 2,3 2,7 3,1 4,5 5,3 6,2 8,7
Watter volume [l/m] 1,9 2,3 2,7 3,1 4,3 3,7 4,4 5,1 5,8 8,3 3,7 4,4 5,1 5,8 8,4 5,3 6,4 7,6 8,7 12,6
Flow coefficient -5 -4 -4 -4
2 6,5 x 10 (DN 15) 1,0 x 10 (DN 15) 1,0 x 10 (DN 15) 1,18 x 10 (DN 15)
AT [m ]
Resistance
19,0 (DN 15) 8,5 (DN 15) 8,5 (DN 15) 5,8 (DN 15)
coefficient ξT [-]
Stated values for the flow coefficient AT and the coefficient of resistance ξT apply only to the model RADIK PLAN KLASIK.
b (c0+c1·H)
Characteristic equation: Ф = KT ·H ·∆T
50 The company reserves the right to make technical changes.
Radik BASIC TECHNICAL PARAMETERS
Radik Klasik, Radik vk, Radik vku
Temperature exponent n [-] 1,3197 1,3238 1,3278 1,3319 1,3578 1,3297 1,3316 1,3334 1,3353 1,3574 1,2977 1,3129 1,3282 1,3434 1,3626
KT c0 0,03399300 1,35050000 0,05120200 1,34380000 0,07428700 1,33630000
Radiator weight [kg/m] 15,60 20,57 25,53 30,50 47,00 18,40 24,37 30,33 36,30 56,30 27,70 36,83 45,97 55,10 84,50
Watter volume [l/m] 3,7 4,4 5,1 5,8 8,3 3,7 4,4 5,1 5,8 8,4 5,3 6,4 7,6 8,7 12,6
2 -4 -4 -4
Flow coefficient AT [m ] 1,0 x 10 (DN 15) 1,0 x 10 (DN 15) 1,18 x 10 (DN 15)
Resistance coefficient ξT [-] 8,5 (DN 15) 8,5 (DN 15) 5,8 (DN 15)
Radik vkm
Height H [mm] 300 400 500 600 900 300 400 500 600 900 300 400 500 600 900
Standard heat output [W/m] 748 937 1118 1294 1802 950 1204 1447 1680 2335 1331 1716 2075 2411 3286
Temperature exponent n [-] 1,3135 1,3259 1,3384 1,3508 1,3791 1,2985 1,3122 1,3260 1,3397 1,3609 1,3190 1,3273 1,3357 1,3440 1,3708
KT c0 0,05250800 1,33530000 0,04268400 1,33820000 0,02273700 1,39030000
Radiator weight [kg/m] 15,50 20,22 24,94 29,67 45,17 17,90 23,60 29,30 35,00 54,00 26,20 34,70 43,20 51,70 80,75
Watter volume [l/m] 3,7 4,5 5,3 6,2 8,7 3,7 4,5 5,3 6,2 8,9 5,4 6,7 8,0 9,3 13,0
Radik combi vk
Type 22
COMBI VK
KT c0 15,43760 1,31477
b c1 0,87128 -0,01226
b (c0+c1·H)
Characteristic equation: Ф = KT ·H ·∆T
The company reserves the right to make technical changes. 51
Radik BASIC TECHNICAL PARAMETERS
Radik Plan vkm
Type 11 PLAN VKM Type 21 PLAN VKM Type 22 PLAN VKM Type 33 PLAN VKM
Height H [mm] 300 400 500 600 900 300 400 500 600 900 300 400 500 600 900 300 400 500 600 900
Standard heat output
[W/m] 530 658 780 897 1231 720 904 1072 1226 1617 914 1165 1400 1621 2215 1337 1689 2022 2341 3231
Temperature
1,2617 1,2698 1,2778 1,2859 1,3249 1,3019 1,3144 1,3268 1,3393 1,3553 1,2863 1,2990 1,3117 1,3244 1,3493 1,3284 1,3252 1,3219 1,3187 1,3565
exponent n [-]
KT c0 0,05473850 1,27950000 0,02292700 1,37408000 0,02809110 1,34778000 0,06322600 1,34170000
Radiator weight
13,13 16,81 20,50 24,19 35,25 17,92 23,72 29,53 35,33 52,75 19,80 26,67 33,53 40,40 61,00 28,70 38,17 47,63 57,10 85,50
[kg/m]
Watter volume [l/m] 1,9 2,3 2,7 3,1 4,5 3,7 4,5 5,3 6,2 8,7 3,7 4,5 5,3 6,2 8,9 5,4 6,7 8,0 9,3 13,0
Height H [mm] 303 503 603 903 303 503 603 903 303 503 603 903
Standard heat output [W/m] 287 431 496 665 531 808 941 1330 762 1153 1333 1822
Temperature exponent n [-] 1,2577 1,2656 1,2695 1,2463 1,2649 1,2557 1,2512 1,2776 1,2737 1,2697 1,2677 1,3001
Radiator weight [kg/m] 8,80 14,00 16,70 25,30 15,60 25,10 29,80 46,00 24,90 37,50 43,90 63,50
Watter volume [l/m] 1,9 2,7 3,1 4,3 3,7 5,1 5,8 8,4 5,3 7,6 8,7 12,6
2 -5 -4 -4
Flow coefficient AT [m ] 6,5 x 10 (DN 15) 1,0 x 10 (DN 15) 1,18 x 10 (DN 15)
Resistance coefficient ξT [-] 19,0 (DN 15) 8,5 (DN 15) 5,8 (DN 15)
Stated values for the flow coefficient AT and the coefficient of resistance ξT apply only to the model RADIK HYGIENE.
b (c0+c1·H)
Characteristic equation: Ф = KT ·H ·∆T
52 The company reserves the right to make technical changes.
Radik DATA FOR FITTINGS
Location of hangers Position of radiator
radik hygiene
hygiene vk
Length 10 11 20 21 22 33
400 500-1600 1800 2000 2300 2600 3000
L [mm] 10 VK 11 VK 20 VK 21 VK 22 VK 33 VK
Type
A 133 133 133 133 133 133 133 10 VKL 11 VKL 22 COMBI VK
X3 B 167 167 167 167 167 167 167 10 VKM 11 VKM 20 VKM 21 VKM 22 VKM (33 VKM)
C 117 150 150 150 150 150 150 X1 32 75 83 83 100 155
D 100 133 133 133 133 133 133 (100)
A – – 900 1000 1133 1300 1500 X2 64 107 116 116 150 205
X4 B – – 900 1000 1133 1300 1500
C – – 883 983 1150 1283 1483
D – – 900 1000 1133 1300 1500 The X2 figure is increased by 2 mm for PLAN radiators.
A 133 133 133 133 133 133 133 Notice:
X5 B 100 133 133 133 133 133 133 The values of parameters X1 and X2 depend on type of
C 117 150 150 150 150 150 150
brackets applied.
D 167 167 167 167 167 167 167
A – for types 10, 20, 20S, 21, 22, 30, 33 Table of sizes - hygiene, hygiene vk
20 VK, 20S VK, 21 VK, 22 VK, 22 COMBI VK,
30 VK, 33 VK
B – for type 10 VK Type 10 20S 30
10 VK 20S VK 30 VK
C – for types 11, 11 VK, 11 VKL
D – for type 10 VKL X1 47 115 170
X2 81 167 222
Plan Klasik identical to hygiene, klasik
Plan VK identical to VK, VKM, HYGIENE VK
Plan 11 VKL identical to 11 VKL
Overview of types
Typ 33 3 3
High quality of steel panel radiators RADIK has been confirmed by acquiring the right to use national quality marks of the
prestigious European markets. These marks declare that all specified requirements on the quality of materials, technology,
production process and tests of steel panel radiators RADIK are permanently satisfied and regularly checked.
Long-established quality management system in compliance with ISO 9001:2000 combined with national quality marks
guarantees the highest level of permanent quality of products as well as of all activities of the KORADO company on
European and world markets.
Quality mark for the German market - it has been granted for the complete product range of the
steel panel radiators RADIK
Quality mark for the English market - it has been granted for the following product range of the
steel panel radiators RADIK
Quality mark for the French market - it has been granted for the following product range of the
steel panel radiators RADIK
No. ATITA Model
148/047 2739 RADIK KLASIK , RADIK VK type 10/300, 400, 500, 600, 900
2740 RADIK KLASIK , RADIK VK type 11/300, 400, 500, 600, 900
2741 RADIK KLASIK , RADIK VK type 20/500, 600, 900
4572E / 2742 RADIK KLASIK , RADIK VK type 21/500, 600, 900
2743 RADIK KLASIK , RADIK VK type 22/300, 400
4548E / 2744 RADIK KLASIK , RADIK VK type 33/300, 400
2745 RADIK PLAN VK type 11/ 500, 600
2746 RADIK PLAN VK type 20/ 500, 600
4573E / 2747 RADIK PLAN VK type 21/ 500, 600
4574E / 2748 RADIK PLAN VK type 22/ 500, 600
Safety and proofs of conformity with European guidelines and norms for steel panel radiators RADIK
Conformity mark CE declaring that steel panel radiators RADIK are in compliance with the
guideline of the Community 89/106/EHS (government regulation No. 190/2002 Sb.) and that this
conformity has been approved by the notified body No.1015, Strojírenský zkušební ústav, s.p.
Brno.
An expert for every situation – that is one of the basic • price lists for RADIK steel panel radiators, KORALUX
ideas of the philosophy of the company KORADO with special radiators, KORATHERM flat panel radiators
regard to service. • range of brochures and information leaflets for individual
The company KORADO pays great attention to commu- models of radiators, supplements and accessories
nication with its partners on the market. It offers designers, • Internet web page
merchants, and installers of heating systems broad support
http://www.korado.com
and complete technical documentation and information for
daily work. The goal is clear and comprehensible – to create • e-mail
conditions allowing individual professional groups to design, info@korado.cz
sell, and fit RADIK, KORALUX and KORATHERM radiators • professional lectures in the company training center
so that the final customer can take advantage of their fea-
• professional consulting at specialized exhibitions in the
tures to a full extent. To fulfill this philosophy, the company
Czech Republic and abroad.
KORADO offers:
• Image CD with details about the products and the com-
• technical catalogues for RADIK steel panel radiators,
pany
KORALUX special radiators, KORATHERM flat panel
radiators, KORAMONT fitting techno-logy catalogue • The up-to-date offer is available and regularly updated
on the Internet and on the Image CD.
KORADO, a, s.
Bří Hubálků 869, 560 02 Česká Třebová
Czech Republic
E-Mail: info@korado.cz
http://www.korado.com