Академический Документы
Профессиональный Документы
Культура Документы
1. Two unequal like principal stresses are acting at a point across two perpendicular planes. The
resultant stress acting on a plane inclined at an angle with the major principal plane is to be
determined by Mohrs circle of stress as shown in Fig. 8.19. Two principal stresses in Fig. 8.19 acting
on the point are given by
(a) AO and OB
(b)AC and BC
(c)AB and AC
(d)AD and AB
2. In Fig. 8.19, the radius of the
Mohrs circle is
(a) sum of two principal stress
b) difference of two principal
stress
(c) half of difference of principal
stresses
d) half of sum of two principal stress
83. In Fig. 8.19, the normal stress is given by
(a )AE
b)ED c) CE d) AD
b)ED c) CE d) AD
b)ED c) CE d) AD
90. Fig. 8.20 shows the Mohr's circle of stress for two unequal unlike principal stresses. The two
unequal unlike principal stresses are given by
(a) AC and AD
(b)AC and AB
(c) CE and CD
(d) CO and OB.
91. In Fig. 8.20, radius of Mohr's circle is
(a) sum of two principle stresses
(c) difference of two principle stresses
(c) half of difference of principle stresses
(d) half of sum of two stresses.
92. In Fig. 8.20, the normal stress is given by
(a) ED (b) AE (c) AD (d) CE.
93. In Fig. 8.20, the tangential stress is given by
a) ED (b)AE (c)AD (d) CE.
94.In Fig. 8.20, the resultant stress is given by
(a) ED (b) AD (c)AE (d) CE.
95. In Fig. 8.20, obliquity is represented by
(a) angle ECD (b) angle EOD (b) angle EAD (d) angle AED.
96. In Fig. 8.20, the angle of oblique plane on which normal and tangential stresses are determined,
is given by
(a) angle ECD (b) angle AD (c) angle EOD (d) angle AED.
97.In Fig. 8.20, the maximum shear stress is equal to
(a) radius of Mohrs circle
(b) diameter to Mohr's circle
(c) circumference of Mohr's circle
(d) half of the radius of Mohr's circle.
98. Fig. 8.21 shows a body subjected lo two unequal like direct stresses (p1 and p2) in two mutually
perpendicular planes along with a simple shear stress (q). The maximum normal stress will be
a)
b)
c)
d)
b)
c)
d)
a)
d)
b)
c) ( ) +
( + ) +
101. A body is subjected to a direct tensile stress of 300 N/cm2 in one plane accompanied by a
simple shear stress of 200 N/cm2. The maximum normal stress will be
(a) 250 N/cm2
(b) 400 N/cm2
(c) -100 N/cm2
(d) 300 N/cm2
102. In question 101, the minimum normal stress will be
(a) 250 N/cm2
(b) 400 N/cm2
(c) -100 N/cm2
(d) 300 N/cm2
103. In question 10], the maximum shear stress will be
(a) 250 N/cm2
(b) 400 N/cm2
b)
c)
d)
108. In question 107, the strain in the direction of principal stress (e2 ) is given by
a)
b)
c)
d)
109. In question 107, the strain energy stored per unit volume is equal to
a)
b)
110. A strained element is subjected to two principal stresses of 800 N/cm2, and -200N/cm2. If the
Poisson ratio = 0.25 and E= 2 x 10& N/cm2, the strain in the direction of principal stress (800 N/cm2)
will be
(a)0.000425 (b) 0.0002 (c) .0004 (d) 0.0001.
111. In question 110, the strain in the direction of principal stress (- 200 N/cm2) will be
(a)0.000425 (b) 0.0002 (c) .0004 (d) 0.0001.
112. In question 110, the strain energy stored per unit volume would be
(a) 0.125 N/cm2 (b) 0.250 N/cm2 (c) 038 N/cm2 (d) 1.0 N/cm2
113. If p1, p2 and p3 be the principal stresses at a point in a strained material, then strain energy
stored per unit volume will be
a)
b)
c)