Вы находитесь на странице: 1из 284

ZXMSG 5200

Multiplex Service Gateway

Command Manual (Vol I)


Version 2.0.2

ZTE CORPORATION
ZTE Plaza, Keji Road South,
Hi-Tech Industrial Park,
Nanshan District, Shenzhen,
P. R. China
518057
Tel: (86) 755 26771900 800-9830-9830
Fax: (86) 755 26772236
URL: http://support.zte.com.cn
E-mail: doc@zte.com.cn

LEGAL INFORMATION
Copyright 2006 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
The contents of this document and all policies of ZTE CORPORATION, including without limitation policies related to
support or training are subject to change without notice.

Revision History
Date

Revision No.

Serial No.

Reason for Revision

12/30/2006

R1.0

sjzl20070014

First edition

ZTE CORPORATION
Values Your Comments & Suggestions!
Your opinion is of great value and will help us improve the quality of our product
documentation and offer better services to our customers.
Please fax to: (86) 755-26772236; or mail to Documentation R&D Department,
ZTE CORPORATION, ZTE Plaza, A Wing, Keji Road South, Hi-Tech Industrial Park,
Shenzhen, P. R. China 518057.
Thank you for your cooperation!
Document
Name

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Product Version

V2.0.2

Document Revision
Number

R1.0

Equipment Installation Date


Presentation:
(Introductions, Procedures, Illustrations, Completeness, Level of Detail, Organization,
Appearance)
Good
Your evaluation
of this
documentation

Fair

Average

Poor

Bad

N/A

Accessibility:
(Contents, Index, Headings, Numbering, Glossary)
Good

Fair

Average

Poor

Bad

N/A

Intelligibility:
(Language, Vocabulary, Readability & Clarity, Technical Accuracy, Content)
Good

Fair

Average

Poor

Bad

N/A

Please check the suggestions which you feel can improve this documentation:

Your
suggestions for
improvement of
this
documentation

Improve the overview/introduction

Make it more concise/brief

Improve the Contents

Add more step-by-step procedures/tutorials

Improve the organization

Add more troubleshooting information

Include more figures

Make it less technical

Add more examples

Add more/better quick reference aids

Add more detail

Improve the index

Other suggestions
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
# Please feel free to write any comments on an attached sheet.

If you wish to be contacted regarding your comments, please complete the following:
Name

Company

Postcode

Address

Telephone

E-mail

This page is intentionally blank.

Contents
About this Manual ........................................................ xvii
Purpose ............................................................................ xvii
Intended Audience ............................................................. xvii
Prerequisite Skill and Knowledge .......................................... xvii
What is in This Manual ........................................................ xvii
Related Documentation...................................................... xviii
Conventions .......................................................................xix
How to Get in Touch............................................................ xx

Chapter 1.......................................................................... 1
Introduction ..................................................................... 1
Introduction ...................................................................1
Login Modes ...................................................................1
HyperTerminal...................................................................... 2
Telnet ................................................................................. 4
NetNumen N31 ..................................................................... 5

User Modes ....................................................................7


Common User Mode .............................................................. 8
Management Mode ................................................................ 8
Super Mode ....................................................................... 10
Debug Mode....................................................................... 11

General Command Syntax .............................................. 11


Common Variables ........................................................ 12
Global Commands ......................................................... 13
Command List .............................................................. 13
Command Introduction .................................................. 14
c ...................................................................................... 14
T ...................................................................................... 15
u ...................................................................................... 15
W ..................................................................................... 16
L ...................................................................................... 16

M ......................................................................................16

Chapter 2........................................................................ 17
Common User Mode Commands ................................... 17
telnet .......................................................................... 17
config.......................................................................... 18
debug ......................................................................... 18
ndebug........................................................................ 19
disable ........................................................................ 19
enable ......................................................................... 19
end ............................................................................. 20
exit ............................................................................. 20
help ............................................................................ 21
history ........................................................................ 22
logout ......................................................................... 23
ping ............................................................................ 23
save............................................................................ 24
show ........................................................................... 24
sleep ........................................................................... 25
who ............................................................................ 26
write ........................................................................... 26
ag............................................................................... 27

Chapter 3........................................................................ 29
Basic Configuration Commands..................................... 29
globalconst .................................................................. 29
mod-globalconst .................................................................29
get-globalconst ...................................................................30

snmpcfg ...................................................................... 31
add-snmpcfg ......................................................................31
del-snmpcfg .......................................................................32
mod-snmpcfg .....................................................................33
get-snmpcfg .......................................................................34

ctrlport ........................................................................ 34
add-ctrlport ........................................................................34
del-ctrlport .........................................................................35
mod-ctrlport .......................................................................36

get-ctrlport ........................................................................ 37

subnet......................................................................... 37
add-subnet ........................................................................ 37
del-subnet ......................................................................... 38
mod-subnet ....................................................................... 39
get-subnet ......................................................................... 39

multi-ip ....................................................................... 40
add-multi-ip ....................................................................... 40
del-multi-ip ........................................................................ 41

inipaddr ....................................................................... 42
add-inipaddr ...................................................................... 42
del-inipaddr ....................................................................... 43

exipaddr ...................................................................... 43
add-exipaddr...................................................................... 43
del-exipaddr....................................................................... 44
get-ipaddr ......................................................................... 45

multi-mac .................................................................... 45
add-multi-mac.................................................................... 45
del-multi-mac..................................................................... 46

macaddr ...................................................................... 47
add-macaddr...................................................................... 47
del-macaddr....................................................................... 48
get-macaddr ...................................................................... 48

Chapter 4........................................................................ 51
MG System Commands .................................................. 51
mg.............................................................................. 51
add-mg ............................................................................. 51
add-mgcapabili ................................................................... 53
mod-mgbaseattr ................................................................. 55
mod-mgcapabili .................................................................. 56
mod-mgmediatos................................................................ 58
get-mgbaseattr .................................................................. 59
get-mgcapabili ................................................................... 60
mod-mgip.......................................................................... 61
get-mgmediatos ................................................................. 62

mgc ............................................................................ 63
add-mgc............................................................................ 63

del-mgc .............................................................................64
mod-mgc ...........................................................................65
get-mgc.............................................................................66

mgcattr ....................................................................... 66
add-mgcattr .......................................................................67
mod-mgcattr ......................................................................68
get-allmgcattr.....................................................................69
del-mgcattr ........................................................................70

Chapter 5........................................................................ 71
System Configuration Commands ................................. 71
rack ............................................................................ 71
add-rack ............................................................................71
del-rack .............................................................................72
get-rackinfo........................................................................72
get-allrackinfo ....................................................................73

shelf ........................................................................... 74
add-shelf ...........................................................................74
del-shelf ............................................................................75
get-shelfinfo .......................................................................75
get-allshelfinfo....................................................................76

board .......................................................................... 77
get-allcfgboard ...................................................................77
get-boardinfo......................................................................78
add-board-mics...................................................................78
del-board-mics ...................................................................79
add-board-mpr ...................................................................80
del-board-mpr ....................................................................81
add-board-mprb..................................................................82
del-board-mprb...................................................................82
add-board-sics.................................................................... 83
del-board-sics.....................................................................84
add-board-slc .....................................................................85
get-board-slc ......................................................................86
del-board-slc ......................................................................86
add-board-tslc ....................................................................87
del-board-tslc .....................................................................88
add-board-pwr....................................................................89
del-board-pwr.....................................................................89

get-shelfboard .................................................................... 90
add-board-tsld ................................................................... 91
del-board-tsld .................................................................... 92
add-board-pwr2.................................................................. 93
del-board-pwr2................................................................... 93
add-board-scard ................................................................. 94
del-board-scard .................................................................. 95
add-board-pnp ................................................................... 96
add-board-epc.................................................................... 96
del-board-epc..................................................................... 97
get-boardipinfo................................................................... 98
get-boardmacinfo ............................................................... 99

ipaddr ......................................................................... 99
mod-ipaddr-mpr ................................................................. 99
del-ipaddr-mpr ................................................................. 100
mod-ipaddr-ics ................................................................. 101
del-ipaddr-ics ................................................................... 102

macaddr .................................................................... 103


mod-macaddr-ics.............................................................. 103
mod-macaddr-mpr ............................................................ 104

exip .......................................................................... 105


mod-exip-cnic .................................................................. 105
del-exip-cnic .................................................................... 106

voip .......................................................................... 107


add-voip-interface............................................................. 107
del-voip-interface.............................................................. 108
add-voip-route ................................................................. 108
del-voip-route .................................................................. 109
get-voip-ipaddr................................................................. 110

as ............................................................................. 111
add-as ............................................................................ 111
del-as ............................................................................. 112
mod-as ........................................................................... 112
get-as ............................................................................. 113

asp ........................................................................... 114


add-asp........................................................................... 114
del-asp............................................................................ 115
mod-asp.......................................................................... 115

get-asp............................................................................ 116

asasp ........................................................................ 117


add-asasp ........................................................................ 117
del-asasp ......................................................................... 117
get-asasp......................................................................... 118

Chapter 6......................................................................119
Service Configuration Commands ...............................119
isdnbra ...................................................................... 119
add-isdnbra...................................................................... 119
del-isdnbra....................................................................... 120
get-isdnbra ...................................................................... 121

odti........................................................................... 122
add-board-odti.................................................................. 122
del-board-odti................................................................... 122
add-board-odti-t1.............................................................. 123
del-board-odti-t1 .............................................................. 124

v5............................................................................. 124
add-v5if ........................................................................... 124
del-v5if............................................................................ 125
mod-v5if .......................................................................... 126
get-v5if ........................................................................... 127
add-v5link........................................................................ 127
del-v5link......................................................................... 128
mod-v5link....................................................................... 129
get-v5link ........................................................................ 130
add-v5pch........................................................................ 130
del-v5pch......................................................................... 131
mod-v5pg1 ...................................................................... 132
add-v5lcci ........................................................................ 133
del-v5lcci ......................................................................... 133
get-v5Lccistatus................................................................ 134
get-allv5Lcci ..................................................................... 135
mod-v5protcl .................................................................... 135

pstnuser .................................................................... 137


add-v5pstnuser................................................................. 137
get-v5user ....................................................................... 138
del-v5pstnuser.................................................................. 139
mod-v5pstnuser................................................................ 140

isdnuser .................................................................... 141


add-v5isdnuser................................................................. 141
del-v5isdnuser.................................................................. 142
mod-v5isdnuser................................................................ 143

e1attr........................................................................ 144
mod-e1attr ...................................................................... 144
get-e1attr ........................................................................ 145

ddn ........................................................................... 146


add-ddnport..................................................................... 146
del-ddnport...................................................................... 147
add-ddnconn .................................................................... 148

Chapter 7...................................................................... 151


Miscellaneous Commands ...........................................151
add-libdata ................................................................ 151
system ...................................................................... 152
mod-system..................................................................... 152
get-system ...................................................................... 153

qovspar ..................................................................... 153


mod-qovspar.................................................................... 153
get-allqovspar .................................................................. 154

md5info..................................................................... 155
add-md5info .................................................................... 155
del-md5info ..................................................................... 156
mod-md5info ................................................................... 156
get-md5info ..................................................................... 157

check-db.................................................................... 158
ring........................................................................... 159
mod-ring ......................................................................... 159
get-ring ........................................................................... 160
mod-ringprofile................................................................. 160
get-ringprofile .................................................................. 162
load-dftringprof ................................................................ 162
mod-permatone................................................................ 163
get-permatone ................................................................. 164

rip ............................................................................ 165


add-rip-cnic ..................................................................... 165
del-rip-cnic ...................................................................... 167

get-rip-cnic ...................................................................... 167


add-general-rip................................................................. 168
del-general-rip.................................................................. 169
add-rip-ctrl....................................................................... 170
get-rip-ctrl ....................................................................... 171
del-rip-ctrl........................................................................ 171

mednat ..................................................................... 172


add-mednat ..................................................................... 172
del-mednat ...................................................................... 173

ctrlnat ....................................................................... 174


add-ctrlnat ....................................................................... 174
del-ctrlnat ........................................................................ 175
get-allnat ......................................................................... 175

digitmap .................................................................... 176


add-digitmap .................................................................... 176
del-digitmap ..................................................................... 177

9k52conn................................................................... 177
mod-9k52conn.................................................................. 177
get-9k52conn ................................................................... 179

dlink ......................................................................... 179


add-dlink-span.................................................................. 179
del-dlink-span................................................................... 180
get-dlink .......................................................................... 181
mod-dlinkattr ................................................................... 181
get-dlinkattr ..................................................................... 182

mod-pcmattr .............................................................. 183


attrib......................................................................... 184
mod-slcattrib .................................................................... 184
get-slcattrib...................................................................... 186
mod-ipsattrib.................................................................... 187
get-ipsattrib ..................................................................... 188
mod-dspattrib................................................................... 189
get-dspattrib .................................................................... 190

slc ............................................................................ 191


add-slctermid ................................................................... 191
del-slctermid .................................................................... 192
get-slctermid .................................................................... 193
get-slcwildcard.................................................................. 194

ipstermid ................................................................... 194


add-ipstermid................................................................... 194
del-ipstermid.................................................................... 196
get-ipstermid ................................................................... 196
get-ipswildcard ................................................................. 197

rtppar........................................................................ 198
mod-rtppar-mpr ............................................................... 198
get-rtppar-mpr ................................................................. 201
mod-rtppar-mprb.............................................................. 202
get-rtppar-mprb ............................................................... 205
mod-rtppar-miro............................................................... 206
get-rtppar-miro ................................................................ 207

expar ........................................................................ 207


mod-expar-mpr ................................................................ 207
get-expar-mpr.................................................................. 210
mod-expar-mprb .............................................................. 211
get-expar-mprb ................................................................ 212

tline .......................................................................... 213


get-tlineinfo ..................................................................... 213
mod-tlinegroup................................................................. 214

trunk......................................................................... 214
del-trunkslctermid............................................................. 214
add-trunkslctermid............................................................ 215
get-trunkslctermid ............................................................ 216
get-trunkslcattrib .............................................................. 217
mod-trunkuser ................................................................. 218

fixtonechip ................................................................. 219


mod-fixtonechip................................................................ 219
get-fixtonechip ................................................................. 219

tonpro ....................................................................... 220


add-tonpro....................................................................... 220
del-tonpro ....................................................................... 220
mod-tonpro...................................................................... 221
get-tonpro ....................................................................... 222

tonlst ........................................................................ 223


add-tonlst ........................................................................ 223
del-tonlst......................................................................... 225
mod-tonlst ....................................................................... 225

get-tonlst ......................................................................... 227

tonlab ....................................................................... 228


add-tonlab ....................................................................... 228
del-tonlab ........................................................................ 229
mod-tonlab ...................................................................... 230
get-tonlab ........................................................................ 230
get-slcstatus..................................................................... 231
block-slc .......................................................................... 232
unblock-slc....................................................................... 233

ips ............................................................................ 234


get-ipsstatus .................................................................... 234
block-ips .......................................................................... 235
unblock-ips ...................................................................... 235

conf .......................................................................... 236


get-confstatus .................................................................. 236
block-conf ........................................................................ 237
unblock-conf..................................................................... 238

dsp ........................................................................... 239


get-dspstatus ................................................................... 239
block-dsp ......................................................................... 240
unblock-dsp ..................................................................... 241

cardstat..................................................................... 242
get-cardstat-ips ................................................................ 242
get-cardstat-conf .............................................................. 243
get-cardstat-dsp ............................................................... 244

bdstat ....................................................................... 244


get-bdstat-s ..................................................................... 245
get-bdstat-c ..................................................................... 245

ts ............................................................................. 246
get-tsstatus...................................................................... 246
block-ts ........................................................................... 247
unblock-ts ........................................................................ 247

statistic ..................................................................... 248


get-slcstatistic .................................................................. 248
get-ipsstatistic .................................................................. 249

get-sunitinfo .............................................................. 249


get-tsconninfo ............................................................ 250
get-slnconninfo........................................................... 250

get-resourcestat ......................................................... 251


get-board-slc.............................................................. 251
get-hwmap ................................................................ 252
get-hwset .................................................................. 252
get-unitinfo ................................................................ 253
init-agcmd-cfg ............................................................ 253

Appendix A ................................................................... 255


Abbreviations ............................................................... 255
Figures.......................................................................... 257
Tables ........................................................................... 259
Index ............................................................................ 261

This page is intentionally blank.

About this Manual


Purpose
This manual provides commands and guidelines that support the
operation of the ZXMSG 5200 Multiplex Service Gateway.

Intended Audience
This document is intended for engineers and technicians who
perform operation activities on the ZXMSG 5200 Multiplex
Service Gateway.

Prerequisite Skill and Knowledge


To use this document effectively, users should have a general
understanding of wireless telecommunications technology.
Familiarity with the following is helpful:

ZXMSG 5200 system and its various components

User interfaces in ZXMSG 5200 (V2.0.2)

What is in This Manual


This manual contains the following chapters:
TABLE 1 CHAPTER SUMMARY

Chapter

Summary

Chapter 1 Introduction

Describes general information on


MSG5200, login and user modes, general
command syntax, command parameters,
global commands.

Chapter 2 Common
User Mode Commands

Describes the commands available under


common user mode.

Chapter 3 Basic
Configuration
Commands

Describes the commands necessary for


basic configuration.

Confidential and Proprietary Information of ZTE CORPORATION

xvii

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Chapter

Summary

Chapter 4 MG System
Commands

Describes commands necessary for MG


system.

Chapter 5 System
Configuration
Commands

Describes the commands necessary for


system configuration.

Chapter 6 Service
Configuration
Commands

Describes the commands necessary for


providing services such as PSTN, ISDN and
DDN.

Chapter 7
Miscellaneous
Commands

Describes the commands that are


necessary for system maintenance.

Related Documentation
The following documentation is related to this manual:

ZXMSG 5200 Multiplex Service Gateway Documentation


Guide
Technical Category:
ZXMSG 5200 Multiplex Service Gateway Technical Manual
ZXMSG 5200 Multiplex Service Gateway Hardware Manual

Installation Category:
ZXMSG 5200 Multiplex Service
Installation Manual (OUT30)

Gateway

Hardware

ZXMSG 5200 Multiplex Service


Installation Manual (OUT50C/D)

Gateway

Hardware

ZXMSG 5200 Multiplex Service


Installation Manual (19D06H20)

Gateway

Hardware

ZXMSG 5200 Multiplex Service


Installation Manual (ONU100)

Gateway

Hardware

Operation Category:
ZXMSG 5200 Multiplex Service Gateway Operation Manual
ZXMSG 5200 Multiplex Service Gateway Command Manual

Maintenance Category:
ZXMSG 5200 Multiplex Service Gateway Maintenance Manual
(Routine)
ZXMSG 5200 Multiplex Service Gateway Maintenance Manual
(Troubleshooting)

xviii

Confidential and Proprietary Information of ZTE CORPORATION

About this Manual

Conventions
Typographical
Conventions

ZTE documents employ the following typographical conventions.


TABLE 2 TYPOGRAPHIC AL CONVENTIONS

Typeface

Meaning

Italics

References to other Manuals and documents.

Quotes

Links on screens.

Bold

Menus, menu options, function names, input


fields, radio button names, check boxes, dropdown lists, dialog box names, window names.

CAPS

Keys on the keyboard and buttons on screens


and company name.

Constant width

Text that you type, program code, files and


directory names, and function names.

[ ]

Optional parameters.

{}

Mandatory parameters.

Select one of the parameters that are delimited


by it.
Note: Provides additional information about a
certain topic.
Checkpoint: Indicates that a particular step needs
to be checked before proceeding further.
Tip: Indicates a suggestion or hint to make things
easier or more productive for the reader.

Mouse
Operation
Conventions

TABLE 3 MOUSE OPERATION CONVENTIONS

Typeface

Meaning

Click

Refers to clicking the primary mouse button (usually


the left mouse button) once.

Double-click

Refers to quickly clicking the primary mouse button


(usually the left mouse button) twice.

Right-click

Refers to clicking the secondary mouse button


(usually the right mouse button) once.

Drag

Refers to pressing and holding a mouse button and


moving the mouse.

Confidential and Proprietary Information of ZTE CORPORATION

xix

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

How to Get in Touch


The following sections provide information on how to obtain
support for the documentation and the software.
Customer
Support

Documentation
Support

xx

If you have problems, questions, comments, or suggestions


regarding
your
product,
contact
us
by
e-mail
at
support@zte.com.cn. You can also call our customer support
center at (86) 755 26771900 and (86) 800-9830-9830.
ZTE welcomes your comments and suggestions on the quality
and usefulness of this document. For further questions,
comments, or suggestions on the documentation, you can
contact us by e-mail at doc@zte.com.cn; or you can fax your
comments and suggestions to (86) 755 26772236. You can also
browse our website at http://support.zte.com.cn, which contains
various interesting subjects like documentation, knowledge base,
forum and service request.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

Introduction
This chapter covers the following topics:

Introduction

Login Modes

User Modes

General Command Syntax

Common Variables

Global Commands

Introduction
MSG5200 provides a rich set of commands for convenient
operation. Three access modes exist to login into ZXMSG 5200
(V2.0.2). The modes are:

Network Management System (NMS)

Telnet

HyperTerminal

NMS provides a Graphical User Interface (GUI) access. Telnet


and HyperTerminal, however provide a command line access to
MSG5200. This manual emphasizes on the command line
operation. Refer to ZXMSG 5200 Multiplex Service Gateway
Operation Manual for GUI operations.

Login Modes
This section describes the three login modes: HyperTerminal,
Telnet and NetNumen N31.

Confidential and Proprietary Information of ZTE CORPORATION

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

HyperTerminal
Description

HyperTerminal provides a convenient way of logging into ZXMSG


5200. ZXMSG 5200 comes with a cross-over serial port cable for
accessing HyperTerminal.

Access Method

Connect the X31 serial port with PC's serial port. Start
HyperTerminal after making connection. Figure 1 shows
HyperTerminal startup window.
FIGURE 1 HYPERTERMINAL STARTUP WINDOW

Input a connection name for current session and click OK.


Connect To interface displays as Figure 2 shows.
FIGURE 2 CONNECT TO INTERFACE

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Introduction

Choose an appropriate COM port (that connects PC to ZXMSG


5200) against Connect using and click OK. COM Properties
interface displays as Figure 3 shows.
FIGURE 3 COM1 PROPERTIES INTERFACE

Click Restore Defaults on COM Properties interface. Figure 3


shows default parameter settings. Click OK when done.
HyperTerminal command line interface displays as Figure 4
shows.
FIGURE 4 HYPERTERMINAL COMM AND LINE INTERFACE

Input an appropriate username and password to login

Confidential and Proprietary Information of ZTE CORPORATION

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Telnet
Description

Telnet is another simple way to access ZXMSG 5200. Out-band


management uses maintenance port on ICS card and in-band
management uses service uplink traffic channel.

Access Method

To access ZXMSG 5200 via Telnet, set the IP address of the PC


and ZXMSG 5200 in a same IP subnet. Verify connectivity
between ZXMSG 5200 and PC using ping command. Figure 5
shows an example of ping command. A reply from ZXMSG
5200 implies an established connection.
FIGURE 5 PING COMM AND

Once a connection is established, click Start Run and type


telnet A.B.C.D, where A.B.C.D is ZXMSG 5200s in-band or
out-band management IP address. Figure 6 shows telnet
command.
FIGURE 6 TELNET COMMAND

Telnet session starts in response to Telnet request. Figure 7


shows the Telnet command line interface.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Introduction

FIGURE 7 TELNET COMMAND LINE INTERFACE

Input an appropriate username and password to login.

Note: Telnet disconnects an idle session after six minutes.

NetNumen N31
Description

NetNumen provides a graphical access to ZXMSG 5200.


NetNumen also provides an integrated Telnet facility. To login
ZXMSG 5200 by using NetNumen, a valid username and
password is required. When accessing using NetNumen, start
NMS Server first and then NMS Client.

Access Method

Start NMS server first by selecting Start Programs


NetNumen N31 Server as Figure 8.
FIGURE 8 STARTING NMS SERVER

Confidential and Proprietary Information of ZTE CORPORATION

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

NMS Server starts loading as Figure 9 shows.


FIGURE 9 NMS SERVER STARTUP WINDOW

Note: NMS Server startup process may take several minutes


depending upon the hardware configuration of the machine.
Please allow NMS Server to finish loading before starting NMS
Client.

After NMS Server has successfully started, the command prompt


window remains visible as Figure 10 shows.
FIGURE 10 NMS SERVER STARTUP WINDOW

Start NMS Client after NMS Server has started. Choose Start
Programs NetNumen N31 Client as Figure 11 shows.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Introduction

FIGURE 11 STARTING NMS CLIENT

Login window pops up as Figure 12 shows.


FIGURE 12 LOGIN WINDOW

Enter User name, Password, and Server Address and click


OK.

User Modes
ZXMSG 5200 supports the following access modes:

Common User Mode

Management Mode
f

Management User Mode

Management User Configuration Mode

Confidential and Proprietary Information of ZTE CORPORATION

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Super Mode

Debug Mode

Common User Mode


Description

Common user mode provides the least set of privileges and


allows execution of most common commands. Usually, a
command able to be executed in Common User Mode is
necessarily also available (for execution) in higher modes. This
command manual specifies the least-privileged mode for
command execution.
Common User Mode does not allow configuration and advanced
operations. The prompt for Common User Mode is >.

Login and
Logout

Enter Common User Mode by inputting Common User Modes


username (zte) and password (zte). Log out from Common User
Mode by inputting logout command. Figure 13 shows Common
User Mode.
FIGURE 13 COMMON USER MODE

Management Mode
Description

Management
mode
provides
management
operations.
Management mode provides higher level of privileges than
Common User Mode. Management mode is divided into following
two sub-modes:

Management User Mode

Management User Configuration Mode

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Introduction

Management User Mode


Description

Management User Mode inputting privileges to execute advanced


commands and operations. The prompt for Management User
Mode is #.

Login and
Logout

Enter Management User Mode by providing Management User


Modes username (root) and password (root). Log out by
inputting logout command. Figure 14 shows Management User
Mode.
FIGURE 14 MANAGEMENT USER MODE

Management User Configuration Mode


Description

Configuration in Management Mode is done under Management


User Configuration Mode.

Entering and
Exiting

Once in Management User Mode, give command config to enter


Management User Configuration mode. The prompt for
Management User Configuration Mode is (config)#. Use end
command to exit Management User Configuration Mode. Note
that the end command exits Management User Configuration
Mode and switches back to Management User Mode. Figure 15
shows Management User Configuration Mode.

Confidential and Proprietary Information of ZTE CORPORATION

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

FIGURE 15 MANAGEMENT USER CONFIGURATION MODE

Super Mode
Description

Super Mode is the mode with all privileges. All commands can be
executed under Super Mode.

Login and
Logout

Log into Super Mode by inputting enable command and enable


password (zxa10). The prompt for Super Mode is $. Use logout
command to exit Super Mode. Figure 16 shows Super Mode.
FIGURE 16 SUPER MODE

10

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Introduction

Debug Mode
Description

Debug Mode is used for debugging and troubleshooting purpose.

Login and
Logout

Enter Debug Mode by using debug command and Debug-Mode


password (debug). The prompt for Debug Mode is %. Log out
from Debug Mode by using logout command. Figure 17 shows
Debug Mode.
FIGURE 17 DEBUG MODE

Note: While being in any of the modes, press <shift+?> to


get help on commands.

General Command Syntax


All commands issued under ZXMSG 5200 follow a general
command syntax. The general command syntax is as follows:
command <parameter> <variable>
Where;
command is main command. A command is a mandatory part
of command syntax.
parameter is a (mandatory or optional) sub-command after
main command. Parameter (sub-command) is usually inputted
after the main command. There may be a none, single or
multiple parameters in a command. Parameter(s) execute as a
part of main command.
variable provides a means of inputting a value (from specified
range) for a parameter. Commands usually require a value (such
as a VLAN identifier). Choose an appropriate value for variable

Confidential and Proprietary Information of ZTE CORPORATION

11

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

wherever needed. There may be a none, single or multiple


variables in a command. Variables are shown in italics.
Following symbols are used in command systax.

{}: Braces enclose a mandatory parameter. Any parameter(s)


contained within braces must be provided proceeding the
previous parameter in a command.
[]: Square brackets enclose an optional parameter. Any
parameter(s) contained within square brackets may be
provided (if required) procedding the previous parameter in a
command.
n1|n2|...nn: Where n can be a parameter, variable or a
combination of both; included within braces or square
brackets. The symbol implies an exlusive-OR logic operation
on n1 upto nn. Choose a single n only (from n1 upto nn).

Examples
Following examples clarify the general command syntax and use
of symbols.

dsl port ingress-filter {enable portlist [pvc pvcno] |


disable portlist [pvc pvcno]}
dsl port atmpvc {portlist {pvc pvcno vpi vpino vci vcino | vpi
vpino vci vcino} | remoteportlist {pvc pvcno vpi vpino vci vcino |
vpi vpino vci vcino}}
alarm {resend
disable}}

timer

timervalue

output

{enable

Note: Use <tab> key to auto-complete a command. Recall a


command issued earlier by using up-arrow key.

Common Variables
Table 4 lists common variables for commands.
TABLE 4 COMMON COMM AND V ARI ABLES

Common Variables

Description

unitid

0 when only one shelf is present.

slotid

Format: unitid/slotid. Example: 0/3

linkid

Format: unitid/slotid/linked.
Example: 0/3/1

12

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Introduction

Common Variables

Description

portid

Format: unitid/slotid/portid.
Example: 0/3/2

portlist

Appears as portid or portid, portid or


portid, and portid-portid.

vlanid

VLAN identifier value. Range: 1 ~ 4094

vlanlist

VLAN List value. Appears as vlanid or


vlanid, vlanid or vlanid, vlanid-vlanid.

vpi

VPI Value. Range: 0 ~ 255

vci

VCI Value. Range: 0 ~ 65535

pvclist

PVC List

profilename

Configuration file name

Global Commands
This section describes information regarding MSG5200s global
commands.

Command List
Boot commands are executed in boot mode. Prompt for boot
mode is [ICS Boot]. Login into MSG5200 through a console
port and restart ICS card. To enter boot mode, press s to stop
auto-boot (Press s when U300 gives Press s to stop auto-boot
prompt). Pressing s terminates loading system version and
enters boot mode. Refer to the following commands list for help
on boot time commands.

Command

Description

Show command.

Download and run main CPU version from FTP.

Show boot parameters.

Modify boot parameters. Mainly for outband network


management (IP and FTP parameters).

Load boot file.

Show files present in version and data file disks.

Download version file(s) using FTP.

Download data file(s) using FTP.

Reset bootline parameters to defalt configuration.

Confidential and Proprietary Information of ZTE CORPORATION

13

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Command

Description

Perform low-level format for version disk c or data disk


d.

Perform high-level format for version disk c or data disk


d.

Delete (remove) files.

Load and run main CPU version from flash.

Modify outbands ports MAC address.

Show and set date/time.

Show version file attributes.

Swap main CPU version.

Show all versions.

Download boot verson files.

Command Introduction
This section provides a brief introduction of general boot-time
commands.

c
This command in boot mode is designed to modify boot line
parameters. Command format is [ICS Boot]: c. Use this
command to modify all boot parameters including parameters
related with system update. For example: network address, FTP
configuration, filename etc. Modify a parameter by giving a new
value for it. Simply press Enter if modification is not required.
Following is an example of the command.

14

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Introduction

T
This command in boot mode is designed to download running
version of ICS and other cards. Command format is [ICS Boot]:
T VerFileName. Copy the version file to FTP default directory.
Open FTP server, confirm that link between MSG5200 and FTP
server is up. The VerFileName parameter is version file name on
FTP server. If version name is specified (using V command), use
local specified version name. if version name is not specified
(using V command), then use remote file name as vesions name.
The transmitted version must have version head.

u
This command is designed to download boot program of ICS
card. Command format is [ICS Boot]: u. Copy the version file
to default directory of FTP server. Open FTP server , confirm that
link between MSG5200 and FTP is up. Following is an example of
the command.

System gives the message Attached TCP/IP interface to


motfcc0 implying that the network communication is OK. After
the system verifies that transmitted version is correct, the
system begins to transmit verson file. The HyperTerminal
interface shows transmission rate. The system prompts done
when transmission is complete. System also shows version files
size.

Confidential and Proprietary Information of ZTE CORPORATION

15

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

W
Version file of main CPU is saved in two disks. Use this command
to swap the version of main CPU. Command format is [ICS
Boot]: W.

L
This command is designed to load main CPU version. Command
format is [ICS Boot]: L. The flash disk can save two CPU
versions at same time. Version swapping works in toggle mode.

M
This command is designed to view and modify MAC address.
Format to view MAC address is [ICS Boot]: M. Format to
modify MAC address is [ICS Boot]: M <serial number>. A
MAC address is 48 bits (6 bytes) long. The first four bytes are
not modifiable (i.e. 00:d0:d0:20). Default MAC address of main
control cards debug network port is 00-D0-D0-20-00-00. In
order to avoid MAC address conflict between debug network port,
modify the default MAC address while configuring NE.
Usual practice is to change the MAC address as the serial
number using the input serial number modifying MAC address.
When boot-ROM mode starts, it shows the currently configured
cards serial number. Confirm this serial number, same as of the
cards.
For example, ICS0256 means the card serial number is 256.
Therefore set the MAC address should to 00-D0-D0-20-01-00.
Here, the command to set MAC address is M 256.

Note: Commands and filenames are case-sensitive. Also,


changes are automatically saved onto the flash.

16

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

Common User Mode


Commands
This chapter covers commands related to common user
mode. The <shift>+<?> command gives a list of commands
available under common user mode.

telnet
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

telnet adsl-modem portid


To telnet an ADSL port (modem)
The following table provides parameter description.
Parameter

Description

adsl-modem

Telnet an ADSL modem.

Telnet command provides remote access. The following table


provides variable description.
Variable

Description

portid

Port identifier value

MSAG>
The following example shows telnet command.
None

Confidential and Proprietary Information of ZTE CORPORATION

17

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

config
Syntax
Purpose
Syntax
Description
Usage
Guidelines
Mode
Examples

Related
Commands

config
To enter Management User Configuration Mode
None
When in Management User Mode, use this command to enter
Management User Configuration Mode. Exit Management User
Configuration Mode using end command.
MSAG#
The following example shows config command.

None

debug
Syntax
Purpose
Syntax
Description
Usage
Guidelines
Mode
Examples

Related
Commands

18

debug
To enter Debug Mode
None
Use debug command and Debug-Mode password (debug) to
enter Debug Mode. Execute this command while being in any of
the user modes. Exit Debug Mode using ndebug command.
All modes
The following example shows debug command.

ndebug

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Common User Mode Commands

ndebug
Syntax
Purpose
Syntax
Description
Usage
Guidelines
Mode
Examples

Related
Commands

ndebug
To end (exit) Debug Mode
None
When in Debug Mode, use this command to exit Debug Mode.

MSAG%
The following example shows ndebug command.

debug

disable
Syntax
Purpose
Syntax
Description
Usage
Guidelines
Mode
Examples

Related
Commands

disable
To exit from Super Mode
None
When in Super Mode, use this command to exit the Super Mode.

MSAG$
The following example shows disable command.

enable

enable
Syntax
Purpose
Syntax
Description

enable
To enter super mode
None

Confidential and Proprietary Information of ZTE CORPORATION

19

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines
Mode
Examples

Related
Commands

Use enable command and enable password (zxa10) to enter


Super Mode. This command can be issued in Common User
Mode or Management Mode.
MSAG>
The following example shows enable command.

disable

end
Syntax
Purpose
Syntax
Description
Usage
Guidelines
Mode
Examples

Related
Commands

end
To exit management user configuration mode
None
When in Management User Configuration Mode, use
command to exit Management User Configuration Mode.

this

MSAG(config)#
The following example shows end command.

exit

exit
Syntax
Purpose
Syntax
Description
Usage
Guidelines
Mode
Examples

20

exit
To exit from intermediate states (config-show and ag mode)
None
Exit config-show and ag mode by exit command.

MSAG(config-show)#
The following example shows exit command in config-show
mode.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Common User Mode Commands

The following example shows exit command in ag mode.

Related
Commands

end

help
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

help [edit | commands]


To get help on commands
The following table provides syntax description.
Parameter

Description

edit

Show editing keys.

commands

Show system help.

The edit and commands parameters are optional. Use help


command or help command to get help on all commands. Use
help edit command to get help on available editing keystrokes.
help and help commands commands are similar to <?>
command (when <?> is executed as a main command).
All modes
The following example shows help command.

The following example shows help edit command.

Confidential and Proprietary Information of ZTE CORPORATION

21

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

The following example shows help commands command (similar


to help command).

Related
Commands

None

history
Syntax
Purpose
Syntax
Description
Usage
Guidelines
Mode

22

history
To view command history
None
The history command displays all commands issued in a
session and sorts commands in order they are executed.
All modes

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Common User Mode Commands

Examples

Related
Commands

The following example shows history command.

None

logout
Syntax
Purpose
Syntax
Description
Usage
Guidelines
Mode
Examples

Related
Commands

logout
To logout from telnet session
None
The logout command disconnects an established telnet session.
All modes except ag mode
The following example shows logout command in common user
mode.

telnet

ping
Syntax
Purpose
Syntax
Description
Usage
Guidelines

Mode
Examples

ping ipaddr
To test layer-3 connectivity with a system
None
The following table provides variable description.
Variable

Description

ipaddr

IP address value

MSAG#
The following example shows ping command in management
user mode.

Confidential and Proprietary Information of ZTE CORPORATION

23

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

None

save
Syntax
Purpose
Syntax
Description
Usage
Guidelines
Mode
Examples

Related
Commands

save
To save data to flash
None
Save operation saves configuration changes to permanent
storage (flash storage). Press y to save data. Press n to cancel
save operation.
All modes
The following example shows save command in common user
mode.

None

show
Syntax
Purpose
Syntax
Description
Usage
Guidelines

24

show command
To view configuration information for a command
None
Most show commands can be executed in Common User Mode or
Management Mode with few exceptions that execute only in
Super Mode such as show users. The following table provides
variable description.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Common User Mode Commands

Mode
Examples

Related
Commands

Variable

Description

command

Command parameter (after main command)

MSAG>
The following example shows show snmp command in common
user mode.

None

sleep
Syntax
Purpose
Syntax
Description
Usage
Guidelines

Mode
Examples

Related
Commands

sleep seconds
To put ZXMSG 5200 in sleep mode for a specified time
None
Sleep time is in seconds. The following table provides variable
description.
Variable

Description

seconds

Sleep time in seconds. Range: 0 ~ 4294967295

MSAG>
The following example shows sleep command in common user
mode.

None

Confidential and Proprietary Information of ZTE CORPORATION

25

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

who
Syntax
Purpose
Syntax
Description
Usage
Guidelines
Mode
Examples

Related
Commands

who
To view currently logged-in user(s)
None
View user(s) currently logged into ZXMSG 5200 along with
related login information.
MSAG>
The following example shows who command.

None

write
Syntax
Purpose
Syntax
Description
Usage
Guidelines

Mode
Examples

Related
Commands

26

write recipient message


To write text message to another user
None
The following table provides variable description.
Variable

Description

recipient

Recipient name

message

Text message

MSAG>
The following example shows write command.

None

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Common User Mode Commands

ag
Syntax
Purpose
Syntax
Description
Usage
Guidelines
Mode
Examples

Related
Commands

ag
To enter MSAG (Access Gateway) mode
None
Configure shelf and related functions in this mode. To exit ag
mode, input exit command.
All modes
The following example shows ag mode command.

None

Confidential and Proprietary Information of ZTE CORPORATION

27

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

This page is intentionally blank.

28

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

Basic Configuration
Commands
This chapter covers the basic configuration commands.

globalconst
This section describes globalconst commands.

mod-globalconst
Syntax

Purpose
Syntax
Description

mod-globalconst
[slcbrdnum
slcbrdnum]
[voipbrdnum
voipbrdnum] [dasnum dasnum] [dnalnum dnalnum] [dydasnum
dydasnum] [dydnalnum
dydnalnum]
[toneidnum toneidnum]
[termidnum termidnum] [bbcbrdnum bbcbrdnum]
To configure global constant information
The following table describes syntax description.
Parameter

Description

slcbrdnum

Assign ASLC card number.

voipbrdnum

Assign VOIP card number.

dasnum

Assign static DAS maximum number.

dnalnum

Assign dynamic DAS maximum number.

dydasnum

Assign dynamic DAS maximum number.

dydnalnum

Assign dynamic DNAL maximum number.

toneidnum

Assign service tone maximum number.

termidnum

Assign termination ID maximum number.

bbcbrdnum

Assign broadband card number.

Confidential and Proprietary Information of ZTE CORPORATION

29

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode

The following table describes variables of mod-globalconst


command.
Variable

Description

slcbrdnum

ASLC card number. Range: 0 ~ 58 (default: 24)

voipbrdnum

VOIP card number. Range: 0 ~ 3 (default: 2)

dasnum

Maximum number of static DAS. Range: 0 ~ 254


(default: 100)

dnalnum

Maximum number of static DNAL. Range: 0 ~ 1024


(default: 512)

dydasnum

The maximum number of dynamic DAS. Range: 0 ~


2048 (default: 512)

dydnalnum

The maximum number of dynamic DNAL. Range: 0 ~


4095 (default: 4095)

toneidnum

Maximum number of service tone. Range: 0 ~ 1000

termidnum

Maximum number of termination ID. Range: 0 ~


4096 (default: 4096)

bbcbrdnum

Broadband card number. Range: 0 ~ 60

MSAG(ag)#

Examples

The following example shows how to configure global constants.

Related
Command

get-globalconst
add-globalconst

get-globalconst
get-globalconst
Purpose
Syntax
Description
Usage
Guidelines
Mode

30

To display global constant information


None
This command is used to get the global constant information.

MSAG(ag)#

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Basic Configuration Commands

Example

Related
Commands

The following example shows how to display global constants


information.

mod-globalconst

snmpcfg
This section describes snmpcfg commands.

add-snmpcfg
Syntax
Purpose
Syntax
Description

Usage
Guidelines

add-snmpcfg {smpid smpid} [smpinfo smpinfo] {smpport


smpport | smpip smpip} [comro comro] [comrw comrw]
To add SNMP server configuration
The following table describes add-snmpcfg command syntax in
detail.
Parameter

Description

smpid

Assign SNMP ID.

smpinfo

Assign SNMP extra flag.

smpport

Assign SNMP port number.

smpip

Assign SNMP IP address.

comro

Assign read only community string, such as public.

comrw

Assign read-write community string, such as public.

The following table describes add-snmpcfg command variables.


Variable

Description

smpid

SNMP ID. Range: 1 ~ 1

smpinfo

SNMP extra flag: 0 - no IP filter, 1 - IP filter

Confidential and Proprietary Information of ZTE CORPORATION

31

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

Variable

Description

smpport

SNMP port number. Range: 0 ~ 65535

smpip

SNMP IP address: A.B.C.D

comro

Read only community: String

comrw

Read-write community: String

MSAG(ag)#
The following
configuration.

example

shows

how

to

add

SNMP

server

del-snmpcfg
mod-snmpcfg
get-snmpcfg

del-snmpcfg
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

32

del-snmpcfg {smpid smpid}


To delete SNMP server configuration
The following table describes del-snmpcfg command syntax in
detail.
Parameter

Description

smpid

Assign SNMP ID.

The following table describes del-snmpcfg command variables.


Variable

Description

smpid

SNMP ID. Range: 1 ~ 16

MSAG(ag)#
The following example shows how to delete SNMP server
configuration.

mod-snmpcfg
add-snmpcfg

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Basic Configuration Commands

get-snmpcfg

mod-snmpcfg
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

mod-snmpcfg {smpid smpid} [smpinfo smpinfo] {smpport


smpport | smpip smpip} [comro comro] [comrw comrw]
To modify SNMP server configuration
The following table describes mod-snmpcfg command syntax in
detail.
Parameter

Description

smpid

Assign SNMP ID.

smpinfo

Assign SNMP extra flag.

smpport

Assign SNMP port number.

smpip

Assign SNMP IP address.

comro

Assign read only community string, such as public.

comrw

Assign read-write community string, such as 'public.

The following table describes mod-snmpcfg command variables.


Variable

Description

smpid

SNMP ID. Range: 1 ~ 16

smpinfo

SNMP extra flag: 0 - no IP filter, 1 - IP filter

smpport

SNMP port number. Range: 0 ~ 65535

smpip

SNMP IP address: A.B.C.D

comro

Read only community: String

comrw

Read-write community: String

MSAG(ag)#
The following example shows how to modify SNMP server
configuration.

del-snmpcfg
add-snmpcfg
get-snmpcfg

Confidential and Proprietary Information of ZTE CORPORATION

33

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

get-snmpcfg
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

get-snmpcfg [smpid smpid]


To display SNMP server configuration
The following table describes get-snmpcfg command syntax in
detail.
Parameter

Description

smpid

Assign SNMP ID.

The following table describes get-snmpcfg command variables.


Variable

Description

smpid

Assign SNMP ID. Range: 1 ~ 16

MSAG(ag)#
The following example shows how to display SNMP server
configuration.

del-snmpcfg
mod-snmpcfg
add-snmpcfg

ctrlport
This section describes ctrlport commands.

add-ctrlport
Syntax
Purpose

34

add-ctrlport {ctrlid ctrlid} [info info] {port port}


To add SNMP UDP, TCP, Telnet port, or others

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Basic Configuration Commands

Syntax
Description

Usage
Guidelines

Mode

The following table describes add-ctrlport command syntax in


detail.
Parameter

Description

ctrlid

Assign control ID.

info

Assign port information.

port

Assign port number.

The following table describes add-ctrlport command variables.


Variable

Description

ctrlid

Control id: 1 - SNMP PORT, 2 - TELNET PORT, 3 CLOCK PORT

info

Port information: 0 - UDP, 1 - TCP

port

Port number. Range: 0 ~ 65535

MSAG(ag)#

Example

The following
configuration.

Related
Commands

del-ctrlport

example

shows

how

to

add

Telnet

port

mod-ctrlport
get-ctrlport

del-ctrlport
Syntax
Purpose
Syntax
Description

Usage
Guidelines

del-ctrlport {ctrlid ctrlid}


To delete SNMP UDP, TCP or Telnet port
The following table describes del-ctrlport command syntax in
detail.
Parameter

Description

ctrlid

Assign control ID.

The following table describes del-ctrlport command variables.


Variable

Description

ctrlid

Control ID. Range: 2 ~ 40

Confidential and Proprietary Information of ZTE CORPORATION

35

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

MSAG(ag)#
The following example shows how delete control ID 2.

add-ctrlport
mod-ctrlport
get-ctrlport

mod-ctrlport
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

mod-ctrlport {ctrlid ctrlid}[info info] [port port]


To modify SNMP UDP, TCP or Telnet port
The following table describes mod-ctrlport command syntax in
detail.
Parameter

Description

ctrlid

Assign control ID.

info

Assign port information.

port

Assign port number.

The following table describes mod-ctrlport command variables.


Variable

Description

ctrlid

Control ID. Range: 2 ~ 40

info

Port information: 1 - UDP, 2 - TCP

port

Port number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows how to modify Telnet port
configuration.

del-ctrlport
add-ctrlport
get-ctrlport

36

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Basic Configuration Commands

get-ctrlport
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

get-ctrlport {ctrlid ctrlid}


To display SNMP UDP, TCP or Telnet port
The following table describes get-ctrlport command syntax in
detail.
Parameter

Description

ctrlid

Assign control ID.

The following table describes get-ctrlport command variables.


Variable

Description

ctrlid

Control ID. Range: 2 ~ 40

MSAG(ag)#
The following example shows how display port configuration
information.

add-ctrlport
mod-ctrlport
del-ctrlport

subnet
This section describes subnet commands.

add-subnet
Syntax
Purpose
Syntax
Description

add-subnet {type type|innet innet|inmask inmask}


To add subnet
The following table describes add-subnet command syntax in
detail.

Confidential and Proprietary Information of ZTE CORPORATION

37

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

type

Assign IP address type.

innet

Assign subnet address.

inmask

Assign subnet mask.

The following table describes add-subnet command variables.


Variable

Description

type

IP address type: 1 -CONTROL IP, 2 - MEDIA IP

innet

Subnet address: A.B.C.D

inmask

Subnet mask: A.B.C.D

MSAG(ag)#
The following example shows how to add subnet.

del-subnet
mod-subnet
get-subnet

del-subnet
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

38

del-subnet {type type}


To delete subnet
The following table describes del-subnet command syntax in
detail.

Parameter

Description

type

Assign IP address type.

The following table describes del-subnet command variables.


Variable

Description

type

IP address type: 1 - CONTROL IP, 2 - MEDIA IP

MSAG(ag)#
The following example shows how to delete subnet.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Basic Configuration Commands

Related
Commands

add-subnet
mod-subnet
get-subnet

mod-subnet
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

mod-subnet {type type | innet innet | inmask inmask}


To modify subnet
The following table describes mod-subnet command syntax in
detail.
Parameter

Description

Type

Assign IP address type.

Innet

Assign subnet address.

Inmask

Assign subnet mask.

The following table describes mod-subnet command variables.


Parameter

Description

Type

IP address type: 1 - CONTROL IP, 2 - MEDIA IP

Innet

Subnet address: A.B.C.D

Inmask

Subnet mask: A.B.C.D

MSAG(ag)#
The following example shows how to modify subnet.

add-subnet
del-subnet
get-subnet

get-subnet
Syntax
Purpose

get-subnet [type type]


To display the subnet

Confidential and Proprietary Information of ZTE CORPORATION

39

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

The following table describes get-subnet command syntax in


detail.
Parameter

Description

type

Assign IP address type.

The following table describes get-subnet command variables.


Variable

Description

type

IP address type. 1 - CONTROL IP, and 2 - MEDIA


IP

MSAG(ag)#
The following example shows how to display subnet.

add-subnet
del-subnet
mod-subnet

multi-ip
This section describes multi-ip commands.

add-multi-ip
Syntax
Purpose
Syntax
Description

40

add-multi-ip {type type | ipaddr ipaddr | submask submask


| ipnum ipnum}
To add multiple IP addresses
The following table describes add-multi-ip command syntax in
detail.
Parameter

Description

type

Assign IP address type.

ipaddr

Assign IP address.

submask

Assign subnet mask.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Basic Configuration Commands

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

ipnum

Assign IP address number that the user wants to


create.

The following table describes add-multi-ip command variables.


Variable

Description

type

IP address type: 1 - CONTROL IP, 2- MEDIA IP,


and 3 - EXTERN IP

ipaddr

IP address: A.B.C.D

submask

Subnet Mask: A.B.C.D

ipnum

IP address number. Range: 1 ~ 20

MSAG(ag)#
The following example shows how to add multiple IP address.

del-multi-ip

del-multi-ip
Syntax
Purpose
Syntax
Description

Usage
Guidelines

del-multi-ip {type type | ipaddr ipaddr | ipnum ipnum}


To delete multiple IP addresses
The following table describes del-multi-ip command syntax in
detail.
Parameter

Description

type

Assign IP address type.

ipaddr

Assign IP address.

ipnum

Assign IP address number that user want to


delete.

The following table describes del-multi-ip command variables.


Variable

Description

type

IP address type: 1 - CONTROL IP, 2 - MEDIA IP, 3


- EXTERN IP

ipaddr

IP address: A.B.C.D

ipnum

IP address number. Range: 1 ~ 20

Confidential and Proprietary Information of ZTE CORPORATION

41

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

MSAG(ag)#
The following example shows how to delete multiple IP address.

add-multi-ip

inipaddr
This section describes inipaddr commands.

add-inipaddr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

42

add-inipaddr {type type | ipaddr ipaddr}


To add an inner IP address to the pool
The following table describes add-inipaddr command syntax in
detail.
Parameter

Description

Type

Assign IP address type.

Ipaddr

Assign IP address.

The following table describes add-inipaddr command variables.


Variable

Description

type

IP address type: 1 - CONTROL IP, 2 - MEDIA IP

ipaddr

IP address: A.B.C.D

MSAG(ag)#
The following example shows how to add an inner IP address to
the pool.

del-inipaddr

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Basic Configuration Commands

del-inipaddr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

del-inipaddr {type type | ipaddr ipaddr}


To delete an inner IP address from the IP pool
The following table describes del-inipaddr command syntax in
detail.
Parameter

Description

Type

Assign IP address type.

Ipaddr

Assign IP address.

The following table describes del-inipaddr command variables.


Variable

Description

type

IP address type: 1 - CONTROL IP, 2 - MEDIA IP

ipaddr

IP address: A.B.C.D

MSAG(ag)#
The following example shows how to delete an inner IP address
from the IP pool.

add-inipaddr

exipaddr
This section describes exipaddr commands.

add-exipaddr
Syntax
Purpose
Syntax
Description

add-exipaddr {type type |ipaddr ipaddr | submask submask}


To add an external IP address to the pool
The following table describes add-exipaddr command syntax in
detail.
Parameter

Description

type

Assign IP address type.

ipaddr

Assign IP address.

submask

Assign subnet mask.

Confidential and Proprietary Information of ZTE CORPORATION

43

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Example

Related
Commands

The following table describes add-exipaddr command variables.


Variable

Description

type

IP address type: 3 - EXTERNAL IP

ipaddr

IP address: A.B.C.D

submask

Subnet mask: A.B.C.D

MSAG(ag)#
The following example shows how to add an external IP address
to the pool.

del-exipaddr

del-exipaddr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

44

del-exipaddr {type type | ipaddr ipaddr}


To delete an external IP address from the pool
The following table describes del-exipaddr command syntax in
detail.
Parameter

Description

type

Assign IP address type.

ipaddr

Assign IP address.

The following table describes del-exipaddr command variables.


Variable

Description

type

IP address type: 3 - EXTERNAL IP

ipaddr

IP address: A.B.C.D

MSAG(ag)#
The following example shows how to delete an external IP
address from the pool.

add-exipaddr

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Basic Configuration Commands

get-ipaddr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

get-ipaddr {type type} [issue issue]


To show an IP address of a pool, whether it is an idle or in use
The following table describes get-ipaddr command syntax in
detail.
Parameter

Description

type

Assign IP address type.

Issue

The IP address is used or not.

The following table describes get-ipaddr command variables.


Variable

Description

Type

IP address type: 1 - CONTROL IP, 2- MEDIA IP,3 EXTERN IP

issue

IP address is used or not: 0 - IDLE, 1 - USE

MSAG(ag)#
The following example shows how to show IP address of a pool,
which is idle IP address.

None

multi-mac
This section describes multi-mac commands.

add-multi-mac
Syntax
Purpose

add-multi-mac {macaddr macaddr | macnum macnum}


To add multiple Mac addresses

Confidential and Proprietary Information of ZTE CORPORATION

45

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

The following table describes add-multi-mac command syntax


in detail.
Parameter

Description

macaddr

Assign MAC address.

macnum

Assign MAC address number user wants to create.

The following table describes add-multi-mac command variables.


Variable

Description

macaddr

MAC address: AA:BB:CC:DD:EE:FF

macnum

MAC addresses number. Range: 1 ~ 20

MSAG(ag)#
The following example shows how to add multiple MAC address.

del-multi-mac
add-macaddr
del-macaddr
get-macaddr

del-multi-mac
Syntax
Purpose
Syntax
Description

Usage
Guidelines

46

del-multi-mac {macaddr macaddr | macnum macnum}


To delete multiple MAC addresses
The following table describes del-multi-mac command syntax
in detail.

Parameter

Description

macaddr

Assign MAC address.

macnum

Assign MAC address number user wants to delete.

The following table describes del-multi-mac command variables.


Variable

Description

macaddr

MAC address: AA:BB:CC:DD:EE:FF

macnum

MAC addresses number. Range: 1 ~ 20

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Basic Configuration Commands

Mode
Example

Related
Commands

MSAG(ag)#
The following example shows how to delete multiple MAC
addresses.

add-multi-mac
add-macaddr
del-macaddr
get-macaddr

macaddr
This section describes macaddr commands.

add-macaddr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

add-macaddr {macaddr macaddr}


To add MAC addresses
The following table describes add-macaddr command syntax in
detail.
Parameter

Description

macaddr

Assign MAC address.

The following table describes add-macaddr command variables.

Variable

Description

macaddr

MAC address: AA:BB:CC:DD:EE:FF

MSAG(ag)#
The following example shows how to add MAC address.

add-multi-mac
del-multi-mac
del-macaddr
get-macaddr

Confidential and Proprietary Information of ZTE CORPORATION

47

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

del-macaddr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

del-macaddr {macaddr macaddr}


To delete MAC addresses
The following table describes del-macaddr command syntax in
detail.
Parameter

Description

macaddr

Assign MAC address.

The following table describes del-macaddr command variables.


Variable

Description

macaddr

MAC address: AA:BB:CC:DD:EE:FF

MSAG(ag)#
The following example shows how to delete MAC address.

add-multi-mac
del-multi-mac
get-macaddr
add-macaddr

get-macaddr
Syntax
Purpose

To display MAC address information

Syntax
Description

None

Usage
Guidelines

None

Mode
Example

48

get-macaddr

MSAG(ag)#
The following example shows how to display MAC address.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Basic Configuration Commands

Related
Commands

del-multi-mac
add-macaddr
del-macaddr
add-multi-mac

Confidential and Proprietary Information of ZTE CORPORATION

49

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

This page is intentionally blank.

50

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

MG System Commands
This chapter covers the commands related to MG System.

mg
This section describes mg commands.

add-mg
Syntax

Purpose
Syntax
Description

add-mg [mgid mgid] [protype protype] [version version]


[encodetp encodetp] [mgport mgport] [translay translay]
[transpro transpro] [domname domname] [mginfo mginfo]
[mgcid1 mgcid1] [mgcid2 mgcid2] [mgcid3 mgcid3] [mgcid4
mgcid] [selfexchange selfexchange] [protectcall protectcall]
To add media gateway for new MSG system configuration
The following table describes add-mg command syntax in detail.
Parameter

Description

mgid

Assign media gateway.

protype

Assign control protocol type.

version

Assign control protocol version.

encodetp

Assign protocol encode type.

mgport

Assign MG port number.

translay

Assign lower transport protocol.

transpro

Assign type of transport protocol.

domname

Assign domain name.

mginfo

Assign MG information to use domain or IP.

mgcid1

Assign controller1 media gateway ID.

mgcid2

Assign controller2 media gateway ID.

Confidential and Proprietary Information of ZTE CORPORATION

51

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

mgcid3

Assign controller3 media gateway ID.

mgcid4

Assign controller4 media gateway ID.

selfexchange

Assign start self exchange.

protectcall

Assign protect call.

The following table describes add-mg command variables.


Variable

Description

mgid

Media gateway. Range: 1 ~ 3 (default: 0)

protype

Control protocol type: 1 - H.248, 2 - MGCP (default: 1)

version

Control protocol version: 1

encodetp

Protocols encode type: 1 - Text, 2 - Binary. (Default


value:1)

mgport

MG port number. Range: 1 ~ 65535

translay

Lower transport protocol: 1 - IP, 2 - ATM. Default


value:1

transpro

Type of transport protocol: 1 - UDP, 2 - TCP

domname

Domain name

mginfo

MG information: 0 - IP, 1 - Use Domain, 2 - IPS IDLE


and 128 for English Tone

mgcid1

Controller1 media gateway ID. Range: 1 ~ 12

mgcid2

Controller2 media gateway ID. Range: 1 ~ 12

mgcid3

Controller3 media gateway ID. Range: 1 ~ 12

mgcid4

Controller4 media gateway ID. Range: 1 ~ 12

selfexchange

Self exchange: 0 - disable, 1 - enable

protectcall

protect call: 0 - disable, 1 - enable

MSAG(ag)#
The following example shows how to add media gateway.

add-mgcapabili
mod-mgcapabili
mod-mgbaseattr

52

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MG System Commands

add-mgcapabili
Syntax

Purpose
Syntax
Description

add-mgcapabili [retranumm reranumm] [resdelay resdelay]


[retranmin retranmin] [pend time pendtime] [pendcount
pendcount] [kprestime kprestime] [tractnum tractnum] [sdpcho
sdpcho] [lkptime lkptime] [trandimax trandimax] [tranidmin
trandimin] [sigtos sigtos] [faxpril1 faxpril1] [faxpril2
faxpril2] [faxpril3 faxpril3] [faxpril4 faxpril4] [2833type
2833type] [ipsthreshold ipsthreshold] [calllimit calllimit]
[congesttime congesttime] [congesttone congesttone]
To configure capability of media gateway
The following table describes add-mgcapabili command syntax
in detail.
Parameter

Description

mgid

Assign media Gateway ID.

tractnum

Assign maximum transactions that MG can receive.

sdpcho

Assign command type that SDP supports.

retrannum

Assign times of retransmit.

resdelay

Assign how long does MG wait before it restarts.

retranmin

Assign minimum time to retransmit.

lkpttime

Assign link check of departure time.

pendtime

Assign pending time of transmit transaction.

pendcount

Assign pending counts of a transaction request.

kprestime

Assign reserved time of response to MGC.

tranidmax

Assign maximum value of transaction ID.

tranidmin

Assign minimum value of transaction ID.

sigtos

Assign signal ToS value.

faxpri1

Assign fax ability priority 1.

faxpri2

Assign fax ability priority 2.

faxpri3

Assign fax ability priority 3.

faxpri4

Assign fax ability priority 4.

2833type

Assign 2833 type.

ipsthreshold

Assign IPS threshold value warning.

calllimit

Assign call limit.

congesttime

Assign congestion time.

congesttone

Assign congestion tone.

Confidential and Proprietary Information of ZTE CORPORATION

53

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Example

54

The following
variables.

table

describes

add-mgcapabili

command

Variable

Description

mgid

Media gateway ID. Range: 1 ~3

tractnum

Transaction time. Range: 5000 ~ 7000 (default:


6000)

sdpcho

SD value. Range: 0 ~ 64 (default: 63)

retrannum

Re-transmission number. Range: 3 ~ 10 (default: 5)

resdelay

Mg delay time. Range: 10 ~ 600 (default: 20)

retranmin

Minimum time to retransmit. Range: 2 ~ 600


(Default: 4)

lkpttime

Link check of departure. Range: 20 ~ 300 (default:


70)

pendtime

Pending time. Range: 2 ~ 8 (default: 4)

pendcount

Pending count. Range: 20 ~ 40 (default: 30)

kprestime

Reserved time. Range: 10 ~ 30 (default: 12)

tranidmax

Maximum value of transaction ID Range: 0 ~


4294967295 (default: 80000)

tranidmin

Minimum transaction ID. Range: 0 ~ 60000 (default:


0)

sigtos

Signal ToS value. Range: 0 ~ 7

faxpri1

Fax priority 1: 1 - VBD, 2 - T38

faxpri2

Fax priority 2: 1 - VBD, 2 - T38

faxpri3

Fax priority 3: 1 - VBD, 2 - T38

faxpri4

Fax priority 4: 1 - VBD, 2 - T38

2833type

2833 type. Range: 1 - 2833, 2 - RTP

ipsthreshold

IP threshold value. Range: 1 ~ 100

calllimit

Call limit: O ~ disable, 1 ~ enable

congesttime

Congestion time. Range: 10 ~ 20 (default: 10 s)

congesttone

Congestion tone: 0

MSAG(ag)#
The following example shows how to add media gateway
capability.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MG System Commands

Related
Commands

mod-mgcapabili
get-mgcapabili

mod-mgbaseattr
Syntax

Purpose
Syntax
Description

Usage
Guidelines

add-mgbaseattr [mgid mgid] [protype protype] [version


version] [encodetp encodetp] [mgport mgport] [translay
translay] [transpro transpro] [domname domname] [mginfo
mginfo] [mgcid1 mgcid1] [mgcid2 mgcid2] [mgcid3 mgcid3]
[mgcid4 mgcid] [selfexchange selfexchange] [protectcall
protectcall]
To configure the basic attribute of MG
The following table describes mod-mgbasettr command syntax
in detail.
Parameter

Description

mgid

Assign media gateway.

protype

Assign control protocol type.

version

Assign control protocol version.

encodetp

Assign protocol encode type.

mgport

Assign MG port number.

translay

Assign lower transport protocol.

transpro

Assign type of transport protocol.

domname

Assign domain name.

mginfo

Assign MG information to use domain or IP.

mgcid1

Assign controller1 media gateway ID.

mgcid2

Assign controller2 media gateway ID.

mgcid3

Assign controller3 media gateway ID.

mgcid4

Assign controller4 media gateway ID.

selfexchange

Assign start self exchange.

protectcall

Assign protect call.

The following
variables.

table

describes

mod-mgbaseattr

command

Variable

Description

mgid

Media gateway. Range: 1 ~ 3 (default: 0)

protype

Control protocol type: 1 - H.248, 2 - MGCP (default: 1)

version

Control protocol version: 1

Confidential and Proprietary Information of ZTE CORPORATION

55

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

Variable

Description

encodetp

Protocols encode type: 1 - Text, 2 - Binary. Default


value:1

mgport

MG port number. Range: 1 ~ 65535

translay

Lower transport protocol: 1 - IP, 2 - ATM. Default


value:1

transpro

Type of transport protocol: 1 - UDP, 2 - TCP

domname

Domain name

mginfo

MG information: 0 - IP, 1 - Use Domain, 2 - IPS IDLE


and 128 for English Tone

mgcid1

Controller1 media gateway ID. Range: 1 ~ 12

mgcid2

Controller2 media gateway ID. Range: 1 ~ 12

mgcid3

Controller3 media gateway ID. Range: 1 ~ 12

mgcid4

Controller4 media gateway ID. Range: 1 ~ 12

selfexchange

Self exchange: 0 - disable, 1 - enable

protectcall

protect call: 0 - disable, 1 - enable

MSAG(ag)#
The following example shows how to configure the basic
attribute of MG.

add-mg

mod-mgcapabili
Syntax

Purpose
Syntax
Description

56

mod-mgcapabili [retranumm reranumm] [resdelay resdelay]


[retranmin retranmin] [pend time pendtime] [pendcount
pendcount] [kprestime kprestime] [tractnum tractnum] [sdpcho
sdpcho] [lkptime lkptime] [trandimax trandimax] [tranidmin
trandimin] [sigtos sigtos] [faxpril1 faxpril1] [faxpril2
faxpril2] [faxpril3 faxpril3] [faxpril4 faxpril4] [2833type
2833type] [ipsthreshold ipsthreshold] [calllimit calllimit]
[congesttime congesttime] [congesttone congesttone]
To modify capability of media gateway
The following table describes mod-mgcapabili command syntax
in detail.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MG System Commands

Usage
Guidelines

Parameter

Description

mgid

Assign media Gateway ID.

tractnum

Assign maximum transactions that MG can receive.

sdpcho

Assign command type that SDP supports.

retrannum

Assign times of retransmit.

resdelay

Assign how long does MG wait before it restarts.

retranmin

Assign minimum time to retransmit.

lkpttime

Assign link check of departure time.

pendtime

Assign pending time of transmit transaction.

pendcount

Assign pending counts of a transaction request.

kprestime

Assign reserved time of response to MGC.

tranidmax

Assign maximum value of transaction ID.

tranidmin

Assign minimum value of transaction ID.

sigtos

Assign signal ToS value.

faxpri1

Assign fax ability priority 1.

faxpri2

Assign fax ability priority 2.

faxpri3

Assign fax ability priority 3.

faxpri4

Assign fax ability priority 4.

2833type

Assign 2833 type.

ipsthreshold

Assign IPS threshold value warning.

calllimit

Assign call limit.

congesttime

Assign congestion time.

congesttone

Assign congestion tone.

The following
variables.

table

describes

mod-mgcapabili

command

Variable

Description

mgid

Media gateway ID. Range: 1 ~3

tractnum

Transaction time. Range: 5000 ~ 7000 (default:


6000)

sdpcho

SD value. Range: 0 ~ 64 (default: 63)

retrannum

Re-transmission number. Range: 3 ~ 10 (default: 5)

resdelay

Mg delay time. Range: 10 ~ 600 (default: 20)

retranmin

Minimum time to retransmit. Range: 2 ~ 600


(Default: 4)

lkpttime

Link check of departure. Range: 20 ~ 300 (default:


70)

Confidential and Proprietary Information of ZTE CORPORATION

57

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

Variable

Description

pendtime

Pending time. Range: 2 ~ 8. (default: 4)

pendcount

Pending count. Range: 20 ~ 40 (default: 30)

kprestime

Reserved time. Range: 10 ~ 30 (default: 12)

tranidmax

Maximum value of transaction ID Range: 0 ~


4294967295 (default: 80000)

tranidmin

Minimum transaction ID. Range: 0 ~ 60000 (default:


0)

sigtos

Signal ToS value. Range: 0 ~ 7

faxpri1

Fax priority 1: 1 - VBD, 2 - T38

faxpri2

Fax priority 2: 1 - VBD, 2 - T38

faxpri3

Fax priority 3: 1 - VBD, 2 - T38

faxpri4

Fax priority 4: 1 - VBD, 2 - T38

2833type

2833 type. Range: 1 - 2833, 2 - RTP

ipsthreshold

IP threshold value. Range: 1 ~ 100

Calllimit

Call limit: O ~ disable, 1 ~ enable

Congesttime

Congestion time. Range: 10 ~ 20 (default: 10 s)

congesttone

Congestion tone: 0

MSAG(ag)#
The following example shows how to modify media gateway
capability.

add-mgcapabili
get-mgcapabili

mod-mgmediatos
Syntax

Purpose
Syntax
Description

58

mod-mgmediatos [pmvoiceTos pmvoiceTos] [pmfaxTos pmfaxTos]


[pmmodTos pmmodTos] [pmdataTos pmdataTos] [imvoiceTos
imvoiceTos] [immodemTos immodemTos] [imdataTos imdataTos]
To configure the Type of Service (ToS) of Media Gateway
The following table describes mod-mgmediatos command syntax
in detail.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MG System Commands

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

pmvoiceTos

Assign PSTN media voice ToS value.

pmfaxTos

Assign PSTN media fax ToS value.

pmmodTos

Assign PSTN media modem ToS value.

pmdataTos

Assign PSTN media data ToS value.

imvoiceTos

Assign ISDN media voice ToS value.

immodemTos

Assign ISDN media modem ToS value.

imdataTos

Assign ISDN media data ToS value.

The following
variables.

table

describes

mod-mgmediatos

Variable

Description

pmvoiceTos

Voice ToS value. Range: 0 ~ 7

pmfaxTos

Fax ToS value. Range: 0 ~ 7

pmmodTos

Modem ToS value. Range: 0 ~ 7

pmdataTos

Data ToS value. Range: 0 ~ 7

imvoiceTos

ISDN ToS value. Range: 0 ~ 7

immodemTos

ISDN ToS value. Range: 0 ~ 7

imdataTos

Voice ToS value. Range: 0 ~ 7

command

MSAG(ag)#
The following example shows how to modify ToS of media
Gateway.

get-mgmediatos

get-mgbaseattr
Syntax
Purpose
Syntax
Description

get-mgbaseattr [mgid mgid]


To configure the media tos of MG
The following table describes get-mgbaseattr command syntax
in detail.

Parameter

Description

mgid

Assign Media gateway ID.

Confidential and Proprietary Information of ZTE CORPORATION

59

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Example

Related
Commands

The following
variables.

table

describes

get-mgbaseattr

command

Variable

Description

mgid

Media gateway ID. Range: 1 ~ 3 (default: 1)

MSAG(ag)#
The following example shows how to display media gateway
information.

mod-mgbaseattr

get-mgcapabili
Syntax
Purpose
Syntax
Description

Usage
Guidelines

60

get-mgcapabili [mgid mgid]


To get the capability of media gateway
The following table describes get-mgcapabili command syntax
in detail.
Parameter

Description

mgid

Assign media gateway ID.

The following
variables.

table

describes

Confidential and Proprietary Information of ZTE CORPORATION

get-mgcapabili

command

Chapter 4 MG System Commands

Mode
Example

Related
Commands

Variable

Description

mgid

Media gateway ID. Range: 1 ~ 3 (default: 1)

MSAG(ag)#
The following example shows how to get capability of media
gateway.

add-mgcapabili
mod-mgcapabili

mod-mgip
Syntax
Purpose
Syntax
Description

mod-mgip {oldip oldip | newip newip} [newmask newmask]


To modify Media Gateway IP address
The following table describes mod-mgip command syntax in
detail.

Confidential and Proprietary Information of ZTE CORPORATION

61

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

oldip

Assign old gateway IP address.

newip

Assign new gateway IP address.

newmask

Assign new Subnet mask.

The following table describes mod-mgip command variables.


Variable

Description

oldip

OLD gateway IP address: A.B.C.D

newip

New gateway IP address: A.B.C.D

newmask

New subnet mask: A.B.C.D

MSAG(ag)#
The following example shows how to modify Media Gateway IP
address.

get-ipaddr

get-mgmediatos
Syntax
Purpose

To get the media Type of Service (ToS) of media gateway

Syntax
Description

None

Usage
Guidelines

None

Mode
Example

62

get-mgmediatos

MSAG(ag)#
The following example shows how to display ToS of media
gateway information.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MG System Commands

Related
Commands

add-mgmediatos
mod-mgmediatos

mgc
This section describes mgc commands.

add-mgc
Syntax

Purpose
Syntax
Description

Usage
Guidelines

add-mgc {mgcid mgcid} [mgctype mgctype] [mgcip mgcip]


[mgcport mgcport] [domname domname] [mgcinfo mgcinfo]
[md5info md5info]
To add media gateway controller
The following table describes add-mgc command syntax in detail.
Parameter

Description

mgcid

Assign media gateway controller ID.

mgctype

Assign media gateway controller.

mgcip

Assign MGC IP address.

mgcport

Assign MGC port.

domname

Assign MGC domain name.

mgcinfo

Assign MGC information to use domain or IP.

md5info

Assign md5 profile ID.

The following table describes add-mgc command variables.


Variable

Description

mgcid

Media gateway controller ID. Range: 1 ~12

mgctype

Media gateway controller: 1 - ZTE, 2 - HW, 3 CISCO, 4 - ALCATEL, 5 - NORTEL (MGCP), 6 -

Confidential and Proprietary Information of ZTE CORPORATION

63

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Variable

Description
NORTEL (H.248)

Mode
Example

Related
Commands

mgcip

MGC IP address: A.B.C.D

mgcport

MGC port number. Range: 0 ~ 65535

domname

Domain name

mgcinfo

MGC information: String

md5info

Md5 profile ID. Range: 0 ~ 10; 0 - disable

MSAG(ag)#
The following example shows how to add media gateway
controller.

del-mgc
mod-mgc
get-mgc

del-mgc
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

64

del-mgc {mgcid mgcid}


To delete a media gateway controller
The following table describes del-mgc command syntax in detail.
Parameter

Description

mgcid

Assign media gateway controller ID.

The following table describes del-mgc command variables.


Variable

Description

mgcid

Media gateway controller ID. Range: 1 ~ 12

MSAG(ag)#
The following example shows how to delete media gateway
controller.

add-mgc
add-mg

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MG System Commands

mod-mgc
get-mgc

mod-mgc
Syntax

Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

mod-mgc {mgcid mgcid} [mgctype mgctype] [mgcip mgcip]


[mgcport mgcport] [domname domname] [mgcinfo mgcinfo]
[md5info md5info]
To modify media gateway controller
The following table describes mod-mgc command syntax in detail.
Parameter

Description

mgcid

Assign media gateway controller ID.

mgctype

Assign media gateway controller.

mgcip

Assign MGC IP address.

mgcport

Assign MGC port.

domname

Assign MGC domain name.

mgcinfo

Assign MGC information to use domain or IP.

md5info

Assign md5 profile ID.

The following table describes mod-mgc command variables.


Variable

Description

mgcid

Media gateway controller ID. Range: 1 ~12

mgctype

Media gateway controller: 1 - ZTE, 2 - HW, 3 CISCO, 4 - ALCATEL, 5 - NORTEL (MGCP), 6 NORTEL (H.248)

mgcip

MGC IP address: A.B.C.D

mgcport

MGC port number. Range: 0 ~ 65535

domname

Domain name

mgcinfo

MGC information: String

md5info

Md5 profile ID. Range: 0 ~ 10; 0 - disable

MSAG(ag)#
The following example shows how to modify media gateway
controller.

Confidential and Proprietary Information of ZTE CORPORATION

65

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

del-mgc
add-mgc
get-mgc

get-mgc
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

get-mgc {mgcid mgcid}


To display the Media gateway controller information
The following table describes get-mgc command syntax in detail.
Parameter

Description

mgcid

Assign media gateway controller ID.

The following table describes get-mgc command variables.


Variable

Description

mgcid

Media gateway controller ID. Range: 1 ~ 12

MSAG(ag)#
The following example shows how to display media gateway
controller information.

del-mgc
add-mgc
mod-mgc

mgcattr
This section describes mgcattr commands.

66

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MG System Commands

add-mgcattr
Syntax

Purpose
Syntax
Description

Usage
Guidelines

Mode

add-mgcattr
{mgctype
mgctype | descript
descript
|
maxtransinpkg maxtransinpkg | userabnormalrpt userabnormalrpt
| queryuserstatus queryuserstatus|heartbeat heartbeat|dmlong
dmlong| dmshort dmshort |dmstart dmstart}
To add media gateway attributes
The following table describes add-mgcattr command syntax in
detail. All the parameters are required.
Parameter

Description

mgctype

Assign MGC Type.

descript

Assign MGC description.

maxtransinpkg

Assign transaction number in one package.

userabnormalrpt

Assign user abnormal report to SS.

queryuserstatus

Assign user query status or no user query


status to SS.

heartbeat

Assign heart interval to SS.

dmlong

Assign dial long timer (L).

dmshort

Assign dial short timer (S).

dmstart

Assign dirst dial timer (T).

The following table describes add-mgcattr command variables.


Variable

Description

mgctype

MGC type. Range: 1 ~ 255

descript

MGC descriptive String value

maxtransinpkg

Max transaction number. Range: 1 ~ 3

userabnormalrpt

User abnormal report. 1 - abnormal user, 2 no support

queryuserstatus

User query status. 1 - State query, 0 - no


user state query

heartbeat

Heart interval. Range: 1 ~ 65535

dmlong

Dial long timer. Range: 0 ~ 50

dmshort

Dial short timer. Range: 0 ~ 50

dmstart

First dial timer. Range: 0 ~ 50

MSAG(ag)#

Example

Confidential and Proprietary Information of ZTE CORPORATION

67

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

The following example shows how to add media gateway


attributes.

Related
Commands

del-mgcattr
mod-mgcattr

mod-mgcattr
Syntax

Purpose
Syntax
Description

Usage
Guidelines

68

mod-mgcattr
{mgctype
mgctype}
[descript
descript]
[maxtransinpkg
maxtransinpkg]
[userabnormalrpt
userabnormalrpt] [queryuserstatus queryuserstatus] [heartbeat
heartbeat] [dmlong dmlong] [dmshort dmshort] [dmstart dmstart]
To modify media gateway controller attributes
The following table describes mod-mgcattr command syntax in
detail.
Parameter

Description

mgctype

Assign MGC Type.

descript

Assign MGC description.

maxtransinpkg

Assign transaction number in one package.

userabnormalrpt

Assign user abnormal report to SS.

queryuserstatus

Assign user query status or no user query


status to SS.

heartbeat

Assign heart interval to SS.

dmlong

Assign dial long timer(L).

dmshort

Assign dial short timer(S).

dmstart

Assign first dial timer(T).

The following table describes mod-mgcattr command variables.


Variable

Description

mgctype

MGC type. Range: 1 ~ 255.

descript

MGC descriptive String value

maxtransinpkg

Max transaction number. Range: 1 ~ 3.

userabnormalrpt

User abnormal report. 1 - abnormal user, 2 no support

queryuserstatus

User query status. 1 - State query, 0 - no


user state query

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MG System Commands

Mode
Example

Related
Commands

Variable

Description

heartbeat

Heart interval. Range: 1 ~ 65535

dmlong

Dial long timer. Range: 0 ~ 50

dmshort

Dial short timer. Range: 0 ~ 50

dmstart

First dial timer. Range: 0 ~ 50

MSAG(ag)#
The following example shows how to modify media gateway
controller attributes.

del-mgcattr
add-mgcattr

get-allmgcattr
Syntax
Purpose

get-allmgcattr
To display all media gateway attributes

Syntax
Description

None

Usage
Guidelines

None

Mode
Example

MSAG(ag)#
The following example shows how to display gateway attributes.

Confidential and Proprietary Information of ZTE CORPORATION

69

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

del-mgcattr
mod-mgcattr
add-mgcattr

del-mgcattr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

70

del-mgcattr {mgctype mgctype}


To delete media gateway attributes
The following table describes del-mgcattr command syntax in
detail. All the parameters are required.
Parameter

Description

mgctype

Assign MGC type.

The following table describes del-mgcattr command variables.


Variable

Description

mgctype

Assign MGC type. Range: 1 ~ 255

MSAG(ag)#
The following example shows how to delete media gateway
attributes.

add-mgcattr
mod-mgcattr

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

System Configuration
Commands
This chapter covers the commands related to System
configuration.

rack
This section describes rack commands.

add-rack
Syntax
Purpose
Syntax
Description

Usage
Guidelines

add-rack {rack rack | type type}


To add rack and rack type
The following table describes add-rack command syntax in
detail.
Parameter

Description

rack

Assign rack.

type

Assign rack type.

The following table describes add-rack command variables.


Variable

Description

rack

Rack number. Range: 1 ~ 3

type

Rack type: 1 - CONTROL RACK, 2 - EX_19INCH


RACK, 3 - ONU100, 4 - OUT50C, 5 - OUT50D, 6 EX_23INCH RACK

Confidential and Proprietary Information of ZTE CORPORATION

71

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

MSAG(ag)#
The following example shows how to add rack.

del-rack
get-rackinfo
get-allrackinfo

del-rack
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

del-rack {rack rack}


To delete rack
The following table describes del-rack command syntax in
detail.
Parameter

Description

rack

Assign rack.

The following table describes del-rack command variables.


Variable

Description

rack

Rack number. Range: 1 ~ 3

MSAG(ag)#
The following example shows how to delete rack.

add-rack
get-rackinfo
get-allrackinfo

get-rackinfo
Syntax

get-rackinfo [rack rack]

Purpose

To display rack information

Syntax
Description

72

The following table describes get-rackinfo command syntax in


detail.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

rack

Assign rack.

The following table describes get-rackinfo command variables.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

MSAG(ag)#
The following example shows how to display rack information.

del-rack
add-racks
get-allrackinfo

get-allrackinfo
Syntax
Purpose

get-allrackinfo
To display all racks information

Syntax
Description

None

Usage
Guidelines

None

Mode
Example

MSAG(ag)#
The following example shows how to get all racks information.

Confidential and Proprietary Information of ZTE CORPORATION

73

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

del-rack
add-racks
get-rackinfo

shelf
This section describes shelf commands.

add-shelf
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example
Related
Commands

add-shelf [rack rack] {physhf physhf | type type}


To add shelf
The following table describes add-shelf command syntax in
detail.
Parameter

Description

rack

Assign rack number.

physhf

Assign shelf.

type

Assign shelf type.

The following table describes add-shelf command variables.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

physhf

Shelf number. Range: 0 ~ 4 (default: 0)

type

Shelf type: 5 - MSAG EXSHELF, 6 - MSAG


CTLSHELF, 8 - ONU100, 9 - OUT50C, 10 OUT50D, 11 - MBSL_CTL, 12 - MBSL_EX, 13 TPU_EX, 14 - PP_EX, 15 - DOUBLEPP_EX

MSAG(ag)#
The following example shows how to add shelf.

del-shelf
get-shelfinfo
get-allshelfinfo

74

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

del-shelf
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

del-shelf [rack rack] {shelf shelf}


To delete shelf
The following table describes del-shelf command syntax in
detail.
Parameter

Description

rack

Assign rack number.

shelf

Assign shelf.

The following table describes del-shelf command variables.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

MSAG(ag)#
The following example shows how to delete shelf.

add-shelf
get-shelfinfo
get-allshelfinfo

get-shelfinfo
Syntax
Purpose
Syntax
Description

Usage
Guidelines

get-shelfinfo [rack rack] [shelf shelf]


To display shelf information.
The following table describes get-shelfinfo command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

The following table describes get-shelfinfo command variables.

Confidential and Proprietary Information of ZTE CORPORATION

75

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

MSAG(ag)#
The following example shows how to display shelf information.

add-shelf
del-shelf
get-allshelfinfo

get-allshelfinfo
Syntax
Purpose

To display all shelves information

Syntax
Description

None

Usage
Guidelines

None

Mode
Example

76

get-allshelfinfo

MSAG(ag)#
The following example shows how to display all shelves
information.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Related
Commands

add-shelf
del-shelf
get-shelfinfo

board
This section describes board commands.

get-allcfgboard
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

get-allcfgboard [rack rack] [shelf shelf]


To show all the cards those exist
The following table
syntax in detail.

describes

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

The following
variables.

table

describes

get-allcfgboard

command

get-allcfgboard

command

Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4 (all shelves are


default shelves)

MSAG(ag)#
The following example shows how show all the cards that exist.

get-boardinfo

Confidential and Proprietary Information of ZTE CORPORATION

77

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

get-boardinfo
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

get-allboardinfo [rack rack] [shelf shelf] {slotslot}


To show the specified card information
The following table describes get-boardinfo command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table describes get-boardinfo command variables.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17.

MSAG(ag)#
The following example shows how to show the specified card
information.

get-boardinfo

add-board-mics
Syntax
Purpose
Syntax
Description

78

add-board-mics [rack rack] [shelf shelf] {slot slot | type


type}
To add ICS card for master shelf
The following table describes add-board-mics command syntax
in detail.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

type

Specify card type.

The following
variables.

table

describes

add-board-mics

command

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10; 5 - ONU100, 7/8 - OUT50C,


5/6 - OUT50D

type

Card type: 1 - ICS, 2 - GISS, 3 - GIS, 4 - EICS

MSAG(ag)#
The following example shows how to add main ICS card for
master shelf.

del-board-mics

del-board-mics
Syntax
Purpose
Syntax
Description

Usage
Guidelines

del-board-mics [rack rack] [shelf shelf] {slot slot}


To delete ICS card on master shelf
The following table describes del-board-mics command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

type

Specify card type.

The following
variables.

table

describes

del-board-mics

command

Confidential and Proprietary Information of ZTE CORPORATION

79

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Default value: 0

slot

Slot number: 9/10; 5 - ONU100, 7/8 - OUT50C,


5/6 -OUT50D

type

Card type: 1 - ICS, 2 - GISS, 3 - GIS, 4 - EICS

MSAG(ag)#
The following example shows how to delete ICS card on master
shelf.

add-board-mics

add-board-mpr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

80

add-board-mpr [rack rack] [shelf shelf] {slot slot}


To add MPR card for master shelf
The following table describes add-board-mpr command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign sot.

The following
variables.

table

describes

add-board-mpr

command

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 8/11/12; 6 - OUT100, 9 - OUT50c,


7/8 - OUT50d

MSAG(ag)#
The following example shows how to add MPR card.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Related
Commands

add-board-mprb
del-board-mpr
del-board-mprb

del-board-mpr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

del-board-mpr [rack rack] [shelf shelf] {slot slot}


To delete MPR card
The following table describes del-board-mpr command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following
variables.

table

describes

add-board-mpr

command

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Default value: 0

slot

Slot number: 8/11/12; 6 - OUT100, 9 - OUT50c,


7/8 - OUT50d

MSAG(ag)#
The following example shows how to delete MPR card.

add-board-mpr
add-board-mprb
del-board-mprb

Confidential and Proprietary Information of ZTE CORPORATION

81

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

add-board-mprb
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

add-board-mprb [rack rack] [shelf shelf] {slot slot}


To add MPRB card for master shelf
The following table describes del-board-mprb command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following
variables.

table

describes

add-board-mprb

command

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 8/11/12; 6 - OUT100, 9 - OUT50c,


7/8 - OUT50d

MSAG(ag)#
The following example shows how to add MPRB card.

add-board-mpr
del-board-mpr
del-board-mprb

del-board-mprb
Syntax
Purpose
Syntax
Description

82

del-board-mprb [rack rack] [shelf shelf] {slot slot}


To delete MPRB card
The following table describes del-board-mprb command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

slot

Assign slot.

The following
variables.

table

describes

add-board-mprb

command

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Default value: 0

slot

Slot number: 8/11/12; 6 - OUT100, 9 - OUT50c,


7/8 - OUT50d

MSAG(ag)#
The following example shows how to delete MPRB card.

add-board-mpr
del-board-mpr

add-board-sics
Syntax
Purpose
Syntax
Description

Usage
Guidelines

add-board-sics {rack rack | shelf shelf | slot slot | type


type | hw1 hw1} [node node]
To add slave shelf ICS card
The following table describes add-board-sics command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slave shelf ICS slot.

type

Specify card type.

hw1

Assign highway number.

Node

Assign node number.

The following
variables.
Variable

table

describes

add-board-sics

command

Description

Confidential and Proprietary Information of ZTE CORPORATION

83

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10; 13 - pp, 12/14 - double pp

type

Card type: 1 - ICS, 2 - GIS, 3 - TPU, 4 - PP, 5 GISE, 6 - EICS

hw1

Highway number. Range: 8 ~ 11

node

Node number: 1/2 - pp

MSAG(ag)#
The following example shows how to add slave shelf ICS card.

del-board-sics

del-board-sics
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode

del-board-sics {rack rack |shelf shelf | slot slot}


To delete ICS card on slave shelf
The following table describes del-board-sics command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Slave shelf ICS slot.

The following
variables.

table

describes

command

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10; 13 - pp, 12/14 - double pp

MSAG(ag)#

Example

84

del-board-sics

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

The following example shows how to delete ICS card on slave


shelf.

Related
Commands

add-board-sics

add-board-slc
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

add-board-slc [rack rack] [shelf shelf] {slot slot | type


type}
To add a subscriber card
The following table describes add-board-slc command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Slot number.

type

Specify card type.

The following table describes add-board-slc command variables.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

type

Card type: 6 - ADL, 11 DLCC(VoIP), 12 - ETI, 13


- VDL, 14 - ATI, 17 - SDL, 18 - ILCA, 19 - ILCB, 20
ADL+, 21 DLCC(V5), 24 ILC+, 26 - ALC, 27 RALC, 28 - ETC, 29 - GETC, 30 - GADLA, 31 GADLB, 32 - GADLC, 33 - GADLA2, 34 - GADLC2,
35 EPOL, 36 - FLC, 37 - SLC, 38 - GVDL, 39 GSDLC, 25 - HDB, 40 - AUDB, 41 - HSB, 42 DLCA, 43 - DIBA, 44 DIBB

MSAG(ag)#
The following example shows how to add subscriber card.

Confidential and Proprietary Information of ZTE CORPORATION

85

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

del-board-slc
get-board-slc

get-board-slc
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

get-board-slc [rack rack] [shelf shelf] {slot slot}


To display subscriber card information
The following table describes get-board-slc command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table describes add-board-slc command variables.


Variables

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows how to get subscriber card
information

del-board-slc
add-board-slc

del-board-slc
Syntax
Purpose

86

del-board-slc [rack rack] [shelf shelf] {slot slot}


To delete subscriber card

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

The following table describes del-board-slc command syntax


in detail.

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Slot number.

The following table describes del-board-slc command variables.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows how to delete subscriber card.

getboardslc
addboardslc

add-board-tslc
Syntax
Purpose
Syntax
Description

Usage
Guidelines

add-board-tslc {rack rack | shelf shelf | slot slot}


To add a TSLC card
The following table describes add-board-tslc command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following
variables.

table

describes

add-board-tslc

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

command

Confidential and Proprietary Information of ZTE CORPORATION

87

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

Variable

Description

shelf

Shelf number: 0

slot

Slot number: 17; 7 - ONU100, 10 - OUT50C

MSAG(ag)#
The following example shows how to add TSLC card.

del-board-tslc

del-board-tslc
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

88

del-board-tslc [rack rack] [shelf shelf] {slot slot}


To delete TSLC card
The following table describes del-board-tslc command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following
variables.

table

describes

del-board-tslc

command

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number: 0

slot

Slot number: 17; 7 - ONU100, 10 - OUT50C

MSAG(ag)#
The following example shows how to delete TSLC card.

get-board-tslc
add-board-tslc

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

add-board-pwr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

add-board-pwr [rack rack] [shelf shelf] {slot slot}


To add power card
The following table describes add-board-pwr command syntax
in detail.

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table describes add-board-pwr command variables.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 1

MSAG(ag)#
The following example shows how to add power card.

del-board-pwr

del-board-pwr
Syntax
Purpose
Syntax
Description

del-board-pwr [rack rack] [shelf shelf] {slot slot}


To delete power card
The following table describes del-board-pwr command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

Confidential and Proprietary Information of ZTE CORPORATION

89

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Example

Related
Commands

The following
variables.

table

describes

del-board-pwr

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 1

command

MSAG(ag)#
The following example shows how to delete power card.

add-board-pwr

get-shelfboard
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

90

get-shelfboard [rack rack] [shelf shelf]


To get board information by rack and shelf
The following table describes get-shelfboard command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

The following
variables.

table

describes

get-shelfboard

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4

command

MSAG(ag)#
The following example shows how get board information by rack
and shelf.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Related
Commands

get-shelfinfo

add-board-tsld
Syntax
Purpose
Syntax
Description

Usage
Guidelines

add-board-tsld {rack rack | shelf shelf | slot slot}


To add a TSLD card
The following table describes add-board-tsld command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following
variables.

table

describes

add-board-tsld

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

command

Confidential and Proprietary Information of ZTE CORPORATION

91

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

Variable

Description

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows how to add TSLD card.

del-board-tsld

del-board-tsld
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

92

del-board-tsld [rack rack] [shelf shelf] {slot slot}


To delete TSLD card
The following table describes del-board-tsld command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following
variables.

table

describes

del-board-tsld

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows how to delete TSLD card.

add-board-tsld

Confidential and Proprietary Information of ZTE CORPORATION

command

Chapter 5 System Configuration Commands

add-board-pwr2
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

add-board-pwr2 [rack rack] [shelf shelf] {slot slot}


To add power 2 card
The following table describes add-board-pwr2 command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following
variables.

table

describes

add-board-pwr2

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 17

command

MSAG(ag)#
The following example shows how to add power card.

del-board-pwr2

del-board-pwr2
Syntax
Purpose
Syntax
Description

del-board-pwr2 [rack rack] [shelf shelf] {slot slot}


To delete power card on the right side
The following table describes del-board-pwr2 command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

Confidential and Proprietary Information of ZTE CORPORATION

93

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Example

Related
Commands

The following
variables.

table

describes

del-board-pwr2

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 17

command

MSAG(ag)#
The following example shows how to delete power card on the
right side.

add-board-pwr2

add-board-scard
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

94

add-board-scard [rack rack] [shelf shelf] {slot slot | scard


scard}
To add sub-card
The following table describes add-board-scard command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

scard

Assign sub-card.

The following
variables.

table

describes

add-board-scard

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

scard

Sub-card number: 1 or 2 (default: 1)

MSAG(ag)#
The following example shows how to add sub-card.

Confidential and Proprietary Information of ZTE CORPORATION

command

Chapter 5 System Configuration Commands

Related
Commands

del-board-scard

del-board-scard
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

del-board-scard [rack rack] [shelf shelf] {slot slot | scard


scard}
To delete sub-card
The following table describes del-board-scard command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

scard

Assign sub-card.

The following
variables.

table

describes

del-board-scard

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

scard

Sub-card number: 1/2 (default: 1)

command

MSAG(ag)#
The following example shows how to delete sub-card.

add-board-scard

Confidential and Proprietary Information of ZTE CORPORATION

95

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

add-board-pnp
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

add-board-pnp [rack rack] [shelf shelf] {slot slot}


To add PNP card
The following table describes add-board-pnp command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following
variables.

table

describes

add-board-pnp

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

command

MSAG(ag)#
The following example shows how to add PNP card.

None

add-board-epc
Syntax
Purpose
Syntax
Description

96

add-board-epc [rack rack] [shelf shelf] {slot slot}


To add EPC card for master shelf
The following table describes add-board-epc command syntax
in detail.
Parameter

Description

rack

Rack number, default: 1

shelf

Shelf number, default: 0

slot

EPC card slot

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Usage
Guidelines

Mode
Example

Related
Commands

The following
variables.

table

describes

add-board-epc

Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

command

MSAG(ag)#
The following example shows how to add EPC card.

del-board-epc

del-board-epc
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

del-board-epc [rack rack] [shelf shelf] {slot slot}


To delete EPC card
The following table describes del-board-epc command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following
variables.

table

describes

del-board-epc

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

command

MSAG(ag)#
The following example shows how to delete EPC card.

Confidential and Proprietary Information of ZTE CORPORATION

97

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

add-board-epc

get-boardipinfo
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

98

get-boardipinfo [rack rack] [shelf shelf] {slot slot}


To display the IP information of the specified card
The following table
syntax in detail.

describes

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following
variables.

table

describes

get-boardipinfo

command

get-boardipinfo

command

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows how to show the IP information of
the specified card

mod-ipaddr-mpr

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

get-boardmacinfo
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

get-boardmacinfo [rack rack] [shelf shelf] {slot slot}


To show the MAC address of the specified card
The following table describes get-boardmacinfo command
syntax in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table describes get-boardmacinfo


variables.
Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

command

MSAG(ag)#
The following example shows how to show the MAC address of
the specified card.

None

ipaddr
This section describes ipaddr commands.

mod-ipaddr-mpr
Syntax

mod-ipaddr-mpr [rack rack] [shelf


phyport phyport | type type | ip ip}

shelf]

{slot

slot

Confidential and Proprietary Information of ZTE CORPORATION

99

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

To modify the IP address of MPR


The following table describes mod-ipaddr-mpr command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port of MPR.

type

Assign IP address type.

ip

Assign IP address, such as 192.1.1.222.

The following
variables.

table

describes

mod-ipaddr-mpr

command

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default is 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 11/12

phyport

Physical port. Range: 0

type

IP address type: 1 - CONTROL IP, 2 - MEDIA IP

ip

IP address: A.B.C.D

MSAG(ag)#
The following example shows how to modify the IP address of
MPR

get-boardipinfo

del-ipaddr-mpr
Syntax
Purpose
Syntax
Description

100

del-ipaddr-mpr [rack rack] [shelf shelf] {slot slot | phyport


phyport|type type}
To delete the IP address of MPR
The following table describes del-ipaddr-mpr command syntax
in detail.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port of MPR.

type

Assign IP address type.

The following
variables.

table

describes

del-ipaddr-mpr

command

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 1 ~ 4 (default: 0)

slot

Slot number: 8/11/12; 6 - OUT100, 9 - OUT50c,


7/8 - OUT50d

phyport

Physical port is 0 ~ 3.

type

IP address type, 1 - CONTROL IP, 2 for MEDIA IP

MSAG(ag)#
The following example shows how to delete the IP address of
MPR

mod-ipaddr-mpr

mod-ipaddr-ics
Syntax
Purpose
Syntax
Description

mod-ipaddr-ics [rack rack] [shelf


phyport phyport] | type type | ip ip}

shelf]

{slot

slot

To modify the ip address of ICS card


The following table
syntax in detail.

describes

mod-ipaddr-mpr

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port of ICS.

type

Assign IP address type.

ip

Assign IP address.

command

Confidential and Proprietary Information of ZTE CORPORATION

101

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Example

Related
Commands

The following
variables.

table

describes

mod-ipaddr-ics

command

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10

phyport

Physical port: 0.

type

IP address type: 1 - CONTROL IP, 2 - MEDIA IP

ip

IP address: A.B.C.D

MSAG(ag)#
The following example shows how to modify the IP address of
ICS card.

del-ipaddr-ics

del-ipaddr-ics
Syntax

del-ipaddr-ics [rack rack]


phyport phyport | type type}

Purpose

To delete the IP address of ICS

Syntax
Description

Usage
Guidelines

102

[shelf

shelf]

{slot

slot

The following table describes del-ipaddr-ics command syntax


in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port.

type

Assign IP address type.

The following
variables.

table

describes

del-ipaddr-ics

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

Confidential and Proprietary Information of ZTE CORPORATION

command

Chapter 5 System Configuration Commands

Mode
Example

Related
Commands

Variable

Description

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10

phyport

Physical port: 0.

type

IP address type: 1 - CONTROL IP, 2 - MEDIA IP

MSAG(ag)#
The following example shows how to delete the IP address of
ICS.

mod-ipaddr-ics

macaddr
This section describes macaddr commands.

mod-macaddr-ics
Syntax
Purpose
Syntax
Description

Usage
Guidelines

mod-macaddr-ics [rack rack]


phyport phyport |mac mac}

[shelf

shelf]

{slot

slot

To modify the MAC address of ICS card


The following table describes mod-macaddr-ics command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign the physical port of ICS.

mac

Assign MAC address.

The following
variables.

table

describes

mod-macaddr-ics

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

command

Confidential and Proprietary Information of ZTE CORPORATION

103

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

Variable

Description

slot

Slot number: 9/10

phyport

Physical port: 0

mac

MAC address

MSAG(ag)#
The following example shows how to modify the MAC address of
ICS card.

del-macaddr-ics

mod-macaddr-mpr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode

mod-macaddr-mpr [rack rack]


phyport phyport | mac mac}

[shelf

{slot

slot

To modify the MAC address of MPR card


The following table describes mod-macaddr-mpr command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port of MPR.

mac

Assign new MAC address.

The following
variables.

table

describes

mod-macaddr-mpr

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 11/12

phyport

Physical port of MPR: 0/1

mac

MAC address AA:BB:CC:DD:EE:FF

MSAG(ag)#

Example

104

shelf]

Confidential and Proprietary Information of ZTE CORPORATION

command

Chapter 5 System Configuration Commands

The following example shows how to modify the MAC address of


MPR card.

Related
Commands

get-boardmacinfo
del-macaddr-mpr

exip
This section describes exip commands.

mod-exip-cnic
Syntax
Purpose
Syntax
Description

Usage
Guidelines

mod-exip-cnic [rack rack] [shelf shelf] {slot slot |phyport


phyport | ipno ipno|type type |ip ip}
To modify external IP address of CNIC on ICS card
The following table describes mod-exip-cnic command syntax
in detail.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port of ICS.

ipno

Assign IP number of physical port.

type

Assign IP address type.

ip

Assign external IP address.

The following table describes mod-exip-cnic command variables.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10

phyport

Physical port: 5

ipno

IP number of physical port range: 2 ~ 7

type

IP address type: 3

Confidential and Proprietary Information of ZTE CORPORATION

105

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

Variable

Description

ip

External IP address A.B.C.D

MSAG(ag)#
The following example shows how to modify external ip address
of CNIC on ICS card.

del-exip-cnic

del-exip-cnic
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

106

del-exip-cnic [rack rack | shelf shelf] {slot slot | phyport


physlot|ipno ipno|type type}
To delete extern IP address of ICS card
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port.

ipno

Assign IP sequence.

type

Assign IP address type.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

phyport

Physical port value: 5

ipno

IP sequence number. Range: 2 ~ 7

type

IP address type (it is external IP address): 3

MSAG(ag)#
The following example shows del-exip-cnic command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Related
Commands

add-exip-cnic

voip
This section describes voip commands.

add-voip-interface
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

add-voip-interface [mgid mgid | type type] {ipaddr ipaddr |


submask submask}
To add the VOIP interface
The following table provides parameter description.
Parameter

Description

mgid

Assign media gateway ID.

type

Select IP address type.

ipaddr

Assign IP address.

submask

Assign subnet mask.

The following table provides variable description.


Variable

Description

mgid

Media gateway ID. Range: 1 ~ 3

type

IP address type: Media IP, value :1

ipaddr

IP address value

submask

Subnet mask value

MSAG(ag)#
The following example shows add-voip-interface command.

del-voip-interface

Confidential and Proprietary Information of ZTE CORPORATION

107

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

del-voip-interface
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

del-voip-interface [mgid mgid | type type] {ipaddr ipaddr


|submask submask}
To delete the VOIP interface
The following table provides parameter description.
Parameter

Description

mgid

Assign media gateway ID.

type

Select media IP address type.

ipaddr

Assign IP address.

submask

Assign subnet mask.

The following table provides variable description.


Variable

Description

mgid

Media gateway ID. Range: 1 ~ 3

type

IP address type, Media IP, value: 1

ipaddr

IP address value

submask

Subnet mask value

MSAG(ag)#
The following example shows del-voip-interface command.

add-voip-route
get-voip-ipaddr

add-voip-route
Syntax
Purpose
Syntax
Description

108

add-voip-route [mgid mgid | type type | netaddr netaddr |


submask submask] {nexthop nexthop}
To add the VOIP route
The following table provides parameter description.
Parameter

Description

mgid

Assign media gateway ID.

type

Route type.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Usage
Guidelines

Mode
Examples

Related
Commands

Parameter

Description

netaddr

Assign IP address.

submask

Assign subnet mask.

nexthop

Assign next hop IP address.

The following table provides variable description.


Variable

Description

mgid

Media gateway ID. Range: 1 ~ 3

type

Route type: Media route, value: 1

netaddr

IP address value

submask

Subnet mask value

nexthop

Next hop IP address value

MSAG(ag)#
The following example shows add-voip-route command.

del-voip-route
get-voip-ipaddr

del-voip-route
Syntax
Purpose
Syntax
Description

Usage
Guidelines

del-voip-route [mgid mgid | type type | netaddr netaddr |


submask submask] {nexthop nexthop}
To delete the VOIP route
The following table provides parameter description.
Parameter

Description

mgid

Assign media gateway ID.

type

Route type.

netaddr

Assign IP address.

submask

Assign subnet mask.

nexthop

Assign next hop IP address.

The following table provides variable description.

Confidential and Proprietary Information of ZTE CORPORATION

109

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

Variable

Description

mgid

Media gateway ID. Range: 1 ~ 3

type

Route type: Media route, value: 1

netaddr

IP address value

submask

Subnet mask value

nexthop

Next hop IP address value

MSAG(ag)#
The following example shows del-voip-route command.

add-voip-interface
add-voip-route
get-voip-ipaddr

get-voip-ipaddr
Syntax
Purpose

To get the VOIP IP address

Syntax
Description

None

Usage
Guidelines

None

Mode
Examples

Related
Commands

110

get-voip-ipaddr

MSAG(ag)#
The following example shows get-voip-ipaddrcommand.

add-voip-route
del-voip-route

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

as
This section describes as commands.

add-as
Syntax
Purpose
Syntax
Description

Usage
Guidelines

add-as {asid asid} [mode mode | modeval modeval | protocol


protocol]
To add an as
The following table provides parameter description.
Parameter

Description

asid

Assign ID of as.

mode

Set working mode.

modeval

Assign N+K value.

protocol

Select type of protocol.

The following table provides variable description.


Variable

Description

asid

As ID. Range: 1 ~ 12

mode

Mode 1: master-shelf (default)


Mode 2: share
Mode 3: broadcast

Mode
Examples

Related
Commands

modeval

Mode value (N stands for the higher 4 bits and K for


lower 4 bits). Range: 0 ~ 255 (default: 1+0)

protocol

Type of protocol: 1 - M3UA, 2 - M2UA, 3 - M2PA, 4


- SUA, 5 - IUA (default)

MSAG(ag)#
The following example shows add-as command.

del-as
mod-as
get-as

Confidential and Proprietary Information of ZTE CORPORATION

111

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

del-as
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

del-as {asid asid}


To delete an as, must not be in asap
The following table provides parameter description.
Parameter

Description

asid

Assign ID of as.

The following table provides variable description.


Variable

Description

asid

As ID. Range: 1 ~ 128

MSAG(ag)#
The following example shows del-as command.

add-as
mod-as
get-as

mod-as
Syntax
Purpose
Syntax
Description

Usage
Guidelines

112

mod-as {asid asid} [mode mode | modeval modeval | protocol


protocol]
To configure the as attribute
The following table provides parameter description.
Parameter

Description

asid

Assign ID of as.

mode

Set working mode.

modeval

Assign N+K value.

protocol

Select type of protocol.

The following table provides variable description.


Variable

Description

asid

As ID. Range: 1 ~ 12

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Variable

Description

mode

Mode 1: master-shelf (default)


Mode 2: share
Mode 3: broadcast

Mode
Examples

Related
Commands

modeval

Mode value. Range: 0 ~ 255 (default: 1 + 0)

protocol

Type of protocol: 1 - M3UA, 2 - M2UA, 3 - M2PA, 4


- SUA, 5 - IUA (default)

MSAG(ag)#
The following example shows mod-as command.

add-as
del-as
get-as

get-as
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-as [asid asid]


To get an as attribute
The following table provides parameter description.
Parameter

Description

asid

Assign ID of as.

The following table provides variable description.


Variable

Description

asid

As ID. Range: 1 ~ 128

MSAG(ag)#
The following example shows get-as command.

add-as
del-as
mod-as

Confidential and Proprietary Information of ZTE CORPORATION

113

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

asp
This section describes asp commands.

add-asp
Syntax

Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

114

add-asp {aspid aspid | desport desport | locport locport |


downprot downprot | destip destip} [instream instream |
outstream outstream]
To add an asp
The following table provides parameter description.
Parameter

Description

aspid

Assign ID of asp.

desport

Assign destination port.

locport

Assign local port.

downport

Assign down protocol.

destip

Assign destination IP address.

instream

Assign instream.

outstream

Assign outstream.

The following table provides variable description.


Variable

Description

aspid

Asp ID. Range: 1 ~ 128

desport

Destination port. Range: 0 ~ 65535

locport

Local port. Range: 0 ~ 65535

downport

Down port. Range: 1 - UDP, 2 - IP

destip

Destination IP address value

instream

Instream value. Range: 0 ~ 16

outstream

Outstream value. Range: 0 ~ 16

MSAG(ag)#
The following example shows add-asp command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

Related
Commands

del-asp
mod-asp
get-asp

del-asp
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

del-asp {aspid aspid}


To delete an asp
The following table provides parameter description.
Parameter

Description

aspid

Assign ID of asp.

The following table provides variable description.


Variable

Description

aspid

Asp ID. Range: 1 ~ 128

MSAG(ag)#
The following example shows del-asp command.

add-asp
mod-asp
get-asp

mod-asp
Syntax
Purpose
Syntax
Description

mod-asp {aspid aspid} [downprot


instream| outstream outstream]

downprot

instream

To modify an asp
The following table provides parameter description.
Parameter

Description

aspid

Assign ID of asp.

downport

Assign down protocol.

instream

Assign instream.

outstream

Assign outstream.

Confidential and Proprietary Information of ZTE CORPORATION

115

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides variable description.


Variable

Description

aspid

Asp ID. Range: 1 ~ 128

downport

Down port. Range: 1 - UDP, 2 - IP

instream

Instream value. Range: 0 ~ 16

outstream

Outstream value. Range: 0 ~ 16

MSAG(ag)#
The following example shows mod-asp command.

add-asp
del-asp
get-asp

get-asp
Syntax

get-asp [aspid aspid]

Purpose

To get an asp attribute

Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides parameter description.


Parameter

Description

aspid

Assign ID of asp.

The following table provides variable description.


Variable

Description

aspid

Asp ID. Range: 1 ~ 128

MSAG(ag)#
The following example shows get-asp command.

add-asp
del-asp
mod-asp

116

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 System Configuration Commands

asasp
This section describes asasp commands.

add-asasp
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

add-asasp {aspid aspid|asid asid}


To add the relation as-asasp
The following table provides parameter description.
Parameter

Description

aspid

Assign ID of asp.

asid

Assign ID of as.

The following table provides variable description.


Variable

Description

aspid

Asp ID. Range: 1 ~ 128

asid

As ID. Range: 1 ~ 128

MSAG(ag)#
The following example shows add-asasp command.

del-asasp
get-asasp

del-asasp
Syntax
Purpose
Syntax
Description

del-asasp {aspid aspid|asid asid}


To delete the relation as-asp
The following table provides parameter description.
Parameter

Description

aspid

Assign ID of asp

asid

Assign ID of as

Confidential and Proprietary Information of ZTE CORPORATION

117

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides variable description.


Variable

Description

aspid

Asp ID. Range: 1 ~ 128

asid

As ID. Range: 1 ~ 128

MSAG(ag)#
The following example shows del-asasp command.

add-asasp
get-asasp

get-asasp
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

118

get-asasp [aspid aspid|asid asid]


To get the relation as-asp
The following table provides parameter description.
Parameter

Description

aspid

Assign ID of asp

asid

Assign ID of as

The following table provides variable description.


Variable

Description

aspid

Asp ID. Range: 1 ~ 128

asid

As ID. Range: 1 ~ 128

MSAG(ag)#
The following example shows get-asasp command.

add-asasp
del-asasp

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

Service Configuration
Commands
This chapter covers the commands related to Service
configuration commands.

isdnbra
This section describes isdnbra commands.

add-isdnbra
Syntax
Purpose
Syntax
Description

Usage
Guidelines

add-isdnbra [rack rack | shelf shelf] {slot slot | index


index | ipaddr ipaddr | portbase portbase} [maxframe maxframe]
To add the ISDN link
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

index

Assign index.

ipaddr

Assign IP address.

portbase

Assign media port base.

maxframe

Assign max HDLC frame length.

The following table provides variable description.

Confidential and Proprietary Information of ZTE CORPORATION

119

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

index

Index number. Range: 0 ~ 7

ipaddr

IP address value

portbase

Media port base number (must be divided exactly


by 32). Range: 5600 ~ 5840

maxframe

Max HDLC frame length value. Range: 1 ~ 65535

MSAG(ag)#
The following example shows add-isdnbra command.

del-isdnbra
get-isdnbra

del-isdnbra
Syntax
Purpose
Syntax
Description

Usage
Guidelines

120

del-isdnbra [rack rack | shelf shelf] {slot slot | index


index}
To delete the ISDN link
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

index

Assign index.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Mode
Examples

Related
Commands

Variable

Description

index

Index number. Range: 0 ~ 7

MSAG(ag)#
The following example shows del-isdnbra command.

add-isdnbra
get-isdnbra

get-isdnbra
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-isdnbra [rack rack | shelf shelf] {slot slot}


To get the ISDN link at the rate of BRA
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows get-isdnbra command.

add-isdnbra
del-isdnbra

Confidential and Proprietary Information of ZTE CORPORATION

121

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

odti
This section describes odti commands.

add-board-odti
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

add-board-odti [rack rack | shelf shelf] {slot slot}


To add the ODTI board for E1
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 8/11/12

MSAG(ag)#
The following example shows add-board-odti command.

del-board-odti

del-board-odti
Syntax
Purpose
Syntax
Description

122

del-board-odti [rack rack | shelf shelf] {slot slot}


To delete the ODTI board for E1
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 8/11/12

MSAG(ag)#
The following example shows del-board-odti command.

add-board-odti

add-board-odti-t1
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

add-board-odti-t1 [rack rack | shelf shelf] {slot slot}


To add the ODTI board for T1
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 8/11/12

MSAG(ag)#
The following example shows add-board-odti-t1 command.

del-board-odti-t1

Confidential and Proprietary Information of ZTE CORPORATION

123

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

del-board-odti-t1
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

del-board-odti-t1 [rack rack | shelf shelf] {slot slot}


To add the ODTI board for T1
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 8/11/12

MSAG(ag)#
The following example shows del-board-odti-t1 command.

add-board-odti-t1

v5
This section describes v5 commands.

add-v5if
Syntax
Purpose
Syntax
Description

124

add-v5if {interfId interfaceid | v5var v5var | v5type v5type}


To add V5 interface
The following table provides parameter description.
Parameter

Description

interfId

Assign V5 interface identifier.

v5var

Assign V5 variable value.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Usage
Guidelines

Parameter

Description

v5type

Assign V5 type.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

Mode
Examples

Related
Commands

v5var

V5 variable value. Range: 0 ~ 254

v5type

V5 type. Range: 1 ~ 2

MSAG(ag)#
The following example shows add-v5if command.

del-v5if
mod-v5if
get-v5if

del-v5if
Syntax
Purpose
Syntax
Description

Usage
Guidelines

del-v5if {interfId interfaceid}


To delete V5 interface
The following table provides parameter description.
Parameter

Description

interfId

Assign V5 interface identifier.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

Mode
Examples

MSAG(ag)#
The following example shows del-v5if command.

Confidential and Proprietary Information of ZTE CORPORATION

125

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

add-v5if
mod-v5if
get-v5if

mod-v5if
Syntax
Purpose
Syntax
Description

Usage
Guidelines

mod-v5if {oldIFId oldinterfaceid} [newIFId


v5var v5variable| letype localexchangetype]

newinterfaceid |

To modify V5 interface
The following table provides parameter description.
Parameter

Description

oldIFId

Assign old V5 interface identifier.

newIFId

Assign new V5 interface identifier.

v5var

Assign v5 variable.

letype

Assign local exchange type.

The following table provides variable description.


Variable

Description

oldinterfaceid

Old V5 interface identifier value.


Range: 0 ~ 4294967294

newinterfaceid

New V5 interface identifier value.


Range: 0 ~ 4294967294

v5variable

V5 variable. Range: 0 ~ 254

localexchangetype Local exchange types


Types:

Mode
Examples

126

- ZXJ10

- FUJITSU

- BELL

- LUCENT

- HW

- SIEMENS

- NOTEL

- DATANG

- NEC

- JULONG

10

- BIAOZHUN

11

- SHUNCONG

MSAG(ag)#
The following example shows del-v5if command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Related
Commands

add-v5if
del-v5if
get-v5if

get-v5if
Syntax
Purpose
Syntax
Description

Usage
Guidelines

get-v5if {interfId interfaceid}


To show V5 interface
The following table provides parameter description.
Parameter

Description

interfId

Assign V5 interface identifier.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows get-v5if command.

add-v5if
mod-v5if
del-v5if

add-v5link
Syntax
Purpose
Syntax
Description

add-v5link {interfaceid interfaceid | linkno linkno | rack


rackno | shelf shelnfo | slot slotno | e1no E1no}
To add V5 link
The following table provides parameter description.
Parameter

Description

interfId

Assign V5 interface identifier.

linkno

Assign link number.

Confidential and Proprietary Information of ZTE CORPORATION

127

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Parameter

Description

rack

Assign rack number.

shelf

Assign shelf number.

slot

Assign slot number.

E1no

Assign E1 number.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

Mode
Examples

Related
Commands

linkno

Link number. Range: 0 ~ 255

rackno

Rack number. Range: 1 ~ 2

shelfno

Shelf number. Range: 0 ~ 4

slotno

Slot number. Range: 1 ~ 17

E1no

E1 number. Range: 1 ~ 8

MSAG(ag)#
The following example shows add-v5link command.

del-v5link
mod-v5link
get-v5link

del-v5link
Syntax
Purpose
Syntax
Description

Usage
Guidelines

128

del-v5link {interfaceid interfaceid | linkno linkno}


To delete V5 link
The following table provides parameter description.
Parameter

Description

interfId

Assign V5 interface identifier.

linkno

Assign link number.

The following table provides variable description.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294
Link number. Range: 0 ~ 255

linkno

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows del-v5link command.

add-v5link
mod-v5link
get-v5link

mod-v5link
Syntax
Purpose
Syntax
Description

Usage
Guidelines

mod-v5link {interfaceid interfaceid | oldlinkno oldlinkno |


newlinkno newlinkno}
To modify V5 interface
The following table provides parameter description.
Parameter

Description

interfaceid

Assign V5 interface identifier.

oldlinkno

Assign old link number.

newlinkno

Assign new link number.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294
Old link number.

oldlinkno

Range: 0 ~ 255

newlinkno

New link number.


Range: 0 ~ 255

Mode
Examples

MSAG(ag)#
The following example shows mod-v5link command.

Confidential and Proprietary Information of ZTE CORPORATION

129

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

add-v5link
del-v5link
get-v5link

get-v5link
Syntax
Purpose
Syntax
Description

Usage
Guidelines

get-v5link {interfaceid interfaceid} [linkno linkno]


To show V5 link
The following table provides parameter description.
Parameter

Description

interfaceid

Assign V5 interface identifier.

linkno

Assign link number.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

linkno

Mode
Examples

Related
Commands

Link number. Range: 0 ~ 255

MSAG(ag)#
The following example shows get-v5linkcommand.

add-v5link
del-v5link
mod-v5link

add-v5pch
Syntax
Purpose
Syntax
Description

130

add-v5pch {interfaceid interfaceid LinkNo linkno Ts timeslot


ProtGrp protocolgroup}
To add V5 physical channel
The following table provides parameter description.
Parameter

Description

interfaceid

Assign V5 interface identifier.

LinkNo

Assign link number.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Usage
Guidelines

Parameter

Description

Ts

Assign time slot.

ProtGrp

Assign Protocol group.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

Mode
Examples

Related
Commands

linkno

Link number. Range: 0 ~ 255

timeslot

Time slot. Range: 15 ~ 31

protocolgroupp

Protocol group. Range: 1 ~ 2

MSAG(ag)#
The following example shows add-v5pch command.

del-v5pch
get-v5pch

del-v5pch
Syntax
Purpose
Syntax
Description

Usage
Guidelines

del-v5pch {InterfaceId interfaceid LinkNo linkno Ts timeslot}


To delete V5 physical channel
The following table provides parameter description.
Parameter

Description

InterfaceId

Assign V5 interface identifier.

LinkNo

Assign link number.

Ts

Assign time slot.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

linkno

Link number. Range: 0 ~ 255

timeslot

Time slot. Range: 15 ~ 31

Confidential and Proprietary Information of ZTE CORPORATION

131

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows del-v5pch command.

add-v5pch
get-v5pch

mod-v5pg1
Syntax
Purpose
Syntax
Description

Usage
Guidelines

mod-v5pg1 {interfaceid interfaceid lcci lcci linkNo linkno ts


timeslot isactive isActive}
To modify V5 pg1
The following table provides parameter description
Parameter

Description

interfaceid

Assign V5 interface identifier.

lcci

Assign lcci.

linkNo

Assign link number.

ts

Assign time slot.

IsActive

Assign IsActive.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

lcci

Lcci. Range: 0 ~ 65534

linkno

Link number. Range: 0 ~ 255

timeslot

Time slot. Range: 15 ~ 31

isActive

Active or stand by mode selection.


Range:

Mode
Examples

132

- Standby

- Active

MSAG(ag)#
The following example shows mod-v5pg1 command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Related
Commands

None

add-v5lcci
Syntax
Purpose
Syntax
Description

Usage
Guidelines

add-v5pg1 {interfaceid interfaceid Lcci lcci LinkNo linkno Ts


timeslot}
To add V5 local channel identity
The following table provides parameter description.
Parameter

Description

interfaceid

Assign V5 interface identifier.

Lcci

Assign local channel identity.

LinkNo

Assign link number.

Ts

Assign time slot.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

Mode
Examples

Related
Commands

lcci

Local channel identity. Range: 0 ~ 65534

linkno

Link number. Range: 0 ~ 255

timeslot

Time slot. Range: 15 ~ 31

MSAG(ag)#
The following example shows add-v5lcci command.

del-v5lcci
get-v5lccistatus
get-allv5lccistatus

del-v5lcci
Syntax
Purpose
Syntax
Description

del-v5pg1 {InterfaceId interfaceid Lcci lcci}


To delete V5 local channel identity
The following table provides parameter description.

Confidential and Proprietary Information of ZTE CORPORATION

133

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Parameter

Description

InterfaceId

Assign V5 interface identifier.

Lcci

Assign local channel identity.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

lcci

Mode
Examples

Related
Commands

Local channel identity. Range: 0 ~ 65534

MSAG(ag)#
The following example shows del-v5lcci command.

add-v5lcci
get-v5lccistatus
get-allv5lccistatus

get-v5Lccistatus
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

134

get-v5Lccistatus {interfaceid interfaceid}


To get V5 local channel identity status
The following table provides parameter description.
Parameter

Description

interfaceid

Assign V5 interface identifier.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value. Range: 0 ~


4294967294

MSAG(ag)#
The following example shows get-v5Lccistatus command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Related
Commands

add-v5Lcci
del-v5lcci
get-v5lccistatus

get-allv5Lcci
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-allv5Lccistatus {InterfaceId interfaceid} [Lcci lcci]


To get all V5 local channel identity status
The following table provides parameter description.
Parameter

Description

InterfaceId

Assign V5 interface identifier.

Lcci

Assign local channel identity.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value. Range: 0 ~


4294967294

lcci

Local channel identity value. Range: 0 ~ 65534

MSAG(ag)#
The following example shows get-allv5Lccistatus command.

add-v5Lcci
del-v5lcci
get-v5lccistatus

mod-v5protcl
Syntax

Purpose
Syntax
Description

mod-v5protcl {interfaceid interfaceid lcci lcci} [ISDNFLG


isdnflg | PSTNFLG pstnflg | CTRLFLG ctrlflg | BCCFLG bccflg |
LINKFLG linkflg | PROTECTFLG protectflg]
To modify V5 protocol
The following table provides parameter description.

Confidential and Proprietary Information of ZTE CORPORATION

135

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Parameter

Description

interfaceid

Assign V5 interface identifier.

lcci

Assign local channel identity.

ISDNFLG

Assign integrated switched digital network flag.

PSTNFLG

Assign public switched telephone network flag.

CTRLFLG

Assign control flag.

BCCFLG

Assign broadcast control flag.

LINKFLG

Assign link flag.

PROTECTFLG

Assign protect flag.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

Mode
Examples

Related
Commands

136

lcci

Local channel identity value. Range: 0 ~ 65534

isdnflg

Integrated switched digital network value.


Range: 0 ~ 1

pstnflg

Public switched telephone network value. Range:


0~1

ctrlflg

Control flag value. Range: 0 ~ 1

bccflg

Broadcast control flag value. Range: 0 ~ 1

linkflg

Link flag value. Range: 0 ~ 1

protectflg

Protect flag value. Range: 0 ~ 1

MSAG(ag)#
The following example shows mod-v5protcl command.

None

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

pstnuser
This section describes pstnuser commands.

add-v5pstnuser
Syntax

Purpose
Syntax
Description

Usage
Guidelines

add-v5pstnuser {InterfaceId interfaceid | L3Add l3add} [rack


rack | shelf shelf] {beginslot beginslot begincircuit
begincircuit Conntype
conntype}
[Trunkrack
trunkrack
|
Trunkshelf trunkshelf | Trunkslot trunkslot | Trunke1no
trunkE1no |Trunkcircuit trunkcircuit [Sum sum]
To add V5 PSTN users
The following table provides parameter description.
Parameter

Description

InterfaceId

Assign V5 interface identifier.

L3Add

Assign layer 3 addresses.

rack

Assign rack number.

shelf

Assign shelf number.

beginslot

Assign beginning slot number.

begincircuit

Assign beginning circuit number.

Conntype

Assign connection type.

Trunkrack

Assign trunk rack number.

Trunkshelf

Assign trunk shelf number.

Trunkslot

Assign trunk slot number.

Trunke1no

Assign trunk E1 number.

Trunkcircuit

Assign trunk circuit number.

Sum

Assign sum.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

l3add

Layer 3 addresses value. Range: 0 ~ 32767

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

beginslot

Begin slot number. Range: 1 ~ 23

Confidential and Proprietary Information of ZTE CORPORATION

137

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Variable

Description

begincircuit

Begin circuit number. Range: 0 ~ 31

conntype

Connection type value. Range:


0- FIX CONNTYPE
1- ACTIVE CONNTYPE

Mode
Examples

Related
Commands

trunkrack

Trunk rack number. Range: 1 ~ 3

trunkshelf

Trunk shelf number. Range: 0 ~ 4

trunkslot

Trunk slot number. Range: 1 ~ 23

trunkE1no

Trunk E1 number. Range: 1 ~ 8

trunkcircuit

Trunk circuit number. Range: 0 ~ 31

sum

Sum value. Range: 1 ~ 192

MSAG(ag)#
The following example shows add-v5pstnuser command.

get-v5pstnuser
del-v5pstnuser
mod-v5pstnuser

get-v5user
Syntax
Purpose
Syntax
Description

138

get-v5user [interfaceid interfaceid | rack rack | shelf shelf]


{slot slot} [indexb indexbindexe indexe]
To get PSTN or ISDN users
The following table provides parameter description.
Parameter

Description

interfaceid

Assign V5 interface identifier.

rack

Assign rack number.

shelf

Assign shelf number.

slot

Assign slot number.

indexb

Assign index B.

indexe

Assign index E.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Usage
Guidelines

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

Mode
Examples

Related
Commands

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 23

indexb

Index B. Range: 0 ~ 65535

indexe

Index E. Range: 0 ~ 65535

MSAG(ag)#
The following example shows get-v5user command.

add-v5pstnuser
mod-v5pstnuser
del-v5pstnuser

del-v5pstnuser
Syntax

Purpose
Syntax
Description

del-v5pstnuser {interfaceid interfaceid} [L3Add l3add | rack


rack | shelf shelf | beginslot beginslot | begincircuit
begincircuit] {Sum sum}
To delete V5 PSTN users
The following table provides parameter description.
Parameter

Description

interfaceid

Assign V5 interface identifier.

L3Addc

Assign layer 3 address.

rack

Assign rack number.

shelf

Assign shelf number.

beginslot

Assign beginning slot number.

begincircuit

Assign beginning circuit number.

Sum

Assign sum.

Confidential and Proprietary Information of ZTE CORPORATION

139

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

Mode
Examples

Related
Commands

l3add

Layer 3 addresses value. Range: 0 ~ 32767

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

beginslot

Begin slot number. Range: 1 ~ 23

begincircuit

Begin circuit number. Range: 0 ~ 31

sum

Sum value. Range: 1 ~ 192

MSAG(ag)#
The following example shows delete-v5pstnuser command.

add-v5pstnuser
get-v5user
mod-v5pstnuser

mod-v5pstnuser
Syntax
Purpose
Mode
Examples

Related
Commands

mod-v5pstnuser
To modify V5 PSTN users
MSAG(ag)#
The following example shows mod-v5pstnuser command.

mod-v5pstnuser
get-v5pstnuser
del-v5pstnuser

140

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

isdnuser
This section describes isdnuser commands.

add-v5isdnuser
Syntax

Purpose
Syntax
Description

Usage
Guidelines

add-v5isdnuser {interfaceid interfaceid EfAddr efaddress}


[rack rack | shelf shelf] {beginslot beginslot begincircuit
begincircuit Conntype
connectiontype
IsdnDsCh
IsdnDsChannel
IsdnGroupCh IsdnGroupChannel IsdnFrameCh IsdnFrameChannel}
[Trunkrack trunkrack | Trunkshelf trunkshelf | Trunkslot
trunkslot | Trunke1no trunkE1no | Trunkcircuit trunkcircuit]
{Sum sum}
To add V5 ISDN users
The following table provides parameter description.
Parameter

Description

interfaceid

Assign V5 interface identifier.

EfAddr

Assign Ef address.

rack

Assign rack number.

shelf

Assign shelf number.

beginslot

Assign beginning slot number.

begincircuit

Assign beginning circuit number.

Conntype

Assign connection type.

IsdnDsCh

Assign ISDN Ds channel.

IsdnGroupCh

Assign ISDN group channel.

IsdnFrameCh

Assign ISDN frame channel.

Trunkrack

Assign trunk rack number.

Trunkshelf

Assign trunk shelf number.

Trunkslot

Assign trunk slot number.

Trunke1no

Assign trunk E1 number.

Trunkcircuit

Assign trunk circuit number.

Sum

Assign sum.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

efaddress

Ef address value. Range: 0 ~ 8191

Confidential and Proprietary Information of ZTE CORPORATION

141

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

beginslot

Begin slot number. Range: 1 ~ 15

begincircuit

Begin circuit number. Range: 0 ~ 15

connectiontype

Connection type value. Range:


2- FIX CONNTYPE
3- ACTIVE CONNTYPE

Mode
Examples

Related
Commands

IsdnDsChannel

ISDN Ds channel. Range: 0 ~ 65534

IsdnGroupsChannel

ISDN group channel. Range: 0 ~ 65534

IsdnFrameChchannel

ISDN frame channel. Range: 0 ~ 65534

trunkrack

Trunk rack number. Range: 1 ~ 3

trunkshelf

Trunk shelf number. Range: 0 ~ 4

trunkslot

Trunk slot number. Range: 1 ~ 17

trunkE1no

Trunk E1 number. Range: 1 ~ 8

trunkcircuit

Trunk circuit number. Range: 0 ~ 31

sum

Sum value. Range: 1 ~ 192

MSAG(ag)#
The following example shows add-v5isdnuser command.

get-v5isdnuser
del-v5isdnuser
mod-v5isdnuser

del-v5isdnuser
Syntax

Purpose
Syntax
Description

del-v5isdnuser
{interfaceid
interfaceid}
[EfAddr
EFaddress | rack rack | shelf shelf | beginslot
beginslot | begincircuit begincircuit] {Sum sum}
To delete V5 ISDN users
The following table provides parameter description.

Parameter

142

Description

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Usage
Guidelines

Parameter

Description

interfaceid

Assign V5 interface identifier.

EfAddr

Assign Ef address.

rack

Assign rack number.

shelf

Assign shelf number.

beginslot

Assign beginning slot number.

begincircuit

Assign beginning circuit number.

sum

Assign sum.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

Mode
Examples

Related
Commands

Efaddress

Ef address value. Range: 0 ~ 8191

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

beginslot

Begin slot number. Range: 1 ~ 17

begincircuit

Begin circuit number. Range: 0 ~ 15

sum

Sum value. Range: 1 ~ 192

MSAG(ag)#
The following example shows del-v5isdnuser command.

add-v5isdnuser
get-v5isdnuser
mod-v5isdnuser

mod-v5isdnuser
Syntax
Purpose
Syntax
Description

mod-v5isdnuser {interfaceid
Conntype conntype}

interfaceid efaddr

EFaddress

To modify V5 ISDN users


The following table provides parameter description.

Confidential and Proprietary Information of ZTE CORPORATION

143

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Parameter

Description

interfaceid

Assign V5 interface identifier.

efaddr

Assign Ef address.

conntype

Assign connection type.

The following table provides variable description.


Variable

Description

interfaceid

V5 interface identifier value.


Range: 0 ~ 4294967294

EFaddress

EF address value. Range: 0 ~ 8191

conntype

Connection type value. Range:


4- FIX CONNTYPE
5- ACTIVE CONNTYPE

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows mod-v5isdnuser command.

add-v5isdnuser
get-v5isdnuser
del-v5isdnuser

e1attr
This section describes e1attr commands.

mod-e1attr
Syntax
Purpose
Syntax
Description

144

mod-e1attr [rack rack | shelf shelf] {slot slot e1no E1no}


[ts1 ts1 | ts2 ts2] {officeid officeid officetype officetype}
To modify E1 attribute
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Usage
Guidelines

Parameter

Description

e1no

Assign E1 number.

ts1

Assign time slot 1.

ts2

Assign time slot 2.

officeid

Assign office identity.

officetype

Assign office type.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

e1no

E1 number. Range: 1 ~ 8

ts1

Time slot 1 number. Range: 0 ~ 31

ts2

Time slot 2 number. Range: 0 ~ 31

officeid

Office identity. Range: 1 ~ 65535

officetype

Office type. Range:


6

Mode
Examples

Related
Commands

- V5DDN

MSAG(ag)#
The following example shows mod-e1Attr command.

get-e1attr

get-e1attr
Syntax
Purpose
Syntax
Description

get-e1attr [rack rack | shelf shelf] {slot slot} [e1no E1no]


To get E1 attribute
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

Shelf

Assign shelf.

slot

Assign slot.

e1no

Assign E1 number.

Confidential and Proprietary Information of ZTE CORPORATION

145

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

E1no

E1 number. Range: 1 ~ 8

MSAG(ag)#
The following example shows get-e1Attr command.

mod-e1attr

ddn
This section describes ddn commands.

add-ddnport
Syntax
Purpose
Syntax
Description

Usage
Guidelines

146

add-ddnport {name name} [rack rack | shelf shelf] {slot


slot circuit circuit type type subratetype subratetype} [ts Ts]
To add Digital Data Network port
The following table provides parameter description.
Parameter

Description

name

Assign port name.

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

circuit

Assign circuit.

type

Assign type.

subratetype

Assign sub rate type.

ts

Assign time slot.

The following table provides variable description.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Mode
Examples

Related
Commands

Variable

Description

name

Port name. Range: <STRING>

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

circuit

Circuit number. Range: 0 ~ 31

type

Type number. Range:


0

- TYPE_64K

- TYPE_2B

- TYPE_HSB

- TYPE_SDM

- TYPE_U

- TYPE_HDB

- TYPE_ODTI

subratetype

Sub rate type. Range: 1 ~ 32

Ts

Time slot number. Range: 0 ~ 31

MSAG(ag)#
The following example shows add-ddnport command.

del-ddnport

del-ddnport
Syntax

del-ddnport {portname portname}

Purpose

To delete digital data network port

Syntax
Description

Usage
Guidelines

The following table provides parameter description.


Parameter

Description

portname

Assign port name.

The following table provides variable description.


Variable

Description

portname

Port name. Range: <STRING>

Confidential and Proprietary Information of ZTE CORPORATION

147

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows del-ddnport command.

add-ddnport

add-ddnconn
Syntax

Purpose
Syntax
Description

Usage
Guidelines

add-ddnport {OprType operationtype} [PortName1 portname1 |


rack1 rack1 | shelf1 shelf1 | slot1 slot1 | circuit1 circuit1
| Ts1 ts1 | PortName2 portname2 | rack2 rack2 | shelf2
shelf2 | slot2 slot2 | circuit2 circuit2 | Ts2 ts2]
{DDNConName DDNConName}
To add digital data network connection
The following table provides parameter description.
Parameter

Description

OprType

Assign operation type.

PortName1

Assign port name 1.

rack1

Assign rack 1.

shelf1

Assign shelf 1.

slot1

Assign slot 1.

circuit1

Assign circuit 1.

Ts2

Assign time slot 1.

PortName2

Assign port name 2.

rack2

Assign rack 2.

shelf2

Assign shelf 2.

slot2

Assign slot 2.

circuit2

Assign circuit 2.

Ts2

Assign time slot 2.

DDNConName

Assign Digital Data Network connection name.

The following table provides variable description.


Variable

Description

operationtype

Operation type. Range

portname1

148

- Use PortName

- Use SPN

Port 1 name. Range: <string>

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 Service Configuration Commands

Mode
Examples

Related
Commands

Variable

Description

rack1

Rack 1 number. Range: 1 ~ 3

shelf1

Shelf 1 number. Range: 0 ~ 4

slot1

Slot 1 number. Range: 1 ~ 17

circuit1

Circuit 1 number. Range: 0 ~ 31

Ts1

Time slot 1 number. Range: 0 ~ 31

portname2

Port 2 name. Range: <string>

rack2

Rack 2 number. Range: 1 ~ 3

shelf2

Shelf 2 number. Range: 0 ~ 4

slot2

Slot 2 number. Range: 1 ~ 17

circuit2

Circuit 2 number. Range: 0 ~ 31

Ts2

Time slot 2 number. Range: 0 ~ 31

DDNConName

Digital Data Network connection name. Range:


<string>

MSAG(ag)#
The following example shows add-ddnconn command.

del-ddnconn

Confidential and Proprietary Information of ZTE CORPORATION

149

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

This page is intentionally blank.

150

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

Miscellaneous
Commands
This chapter covers the miscellaneous commands.

add-libdata
Syntax
Purpose

add-libdata
To add lib data

Syntax
Description

None

Usage
Guidelines

None

Mode
Example

Related
Commands

MSAG(ag)#
The following example shows how to add lib data.

None

Confidential and Proprietary Information of ZTE CORPORATION

151

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

system
This section describes system commands.

mod-system
Syntax

Purpose
Syntax
Description

Usage
Guidelines

Mode

mod-system [maincpuvelv maincpuvelv] [slvcpuvelv slvcpuvelv]


[timezone
timezone]
[ntpmainip
ntpmainip]
[ntpbackip
ntpbackip] [area area] [defaultcidtype defaultcidtype]
To modify system attribute parameters
The following table describes mod-system command syntax in
detail.
Parameter

Description

maincpuvelv

Assign master CPU threshold usage value.

slvcpuvelv

Assign slave CPU threshold usage value.

timezone

Assign time zone value.

ntpmainip

Assign NTP Server IP address.

ntpbackip

Assign backup NTP server IP address.

area

Specify region.

defaultcidtype

Default CID Value.

The following table describes mod-system command variables.


Variable

Description

maincpuvelv

Master CPU threshold usage value. Range: 80


(default: 80)

slvcpuvelv

Slave CPU threshold usage value. Range: 80


(default: 80)

timezone

The time zone value. Range: 0 ~ 24 (default:


8).

ntpmainip

NTP server IP address: A.B.C.D

ntpbackip

Backup NTP server IP address: A.B.C.D

area

Region: 1 - Mainland, 2 - Hong Kong, 3 Singapore

defaultcidtype

Default CID Value: 1 - DTMF, 2 - FSK

MSAG(ag)#

Example

152

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

The following example shows how to modify the system


attributes.

Related
Commands

get-system

get-system
Syntax
Purpose
Syntax
Description
Mode
Example

Related
Commands

get-system
To display the system attribute parameters
None
None
MSAG(ag)#
The following example shows how to get information of the
system attributes.

mod-system

qovspar
This section describes qovspar commands.

mod-qovspar
Syntax
Purpose
Syntax
Description

mod-qovspar {qovsid qovsid}


[jitter jitter]

[loss

loss]

[delay

delay]

To modify quality of service parameters


The following table describes mod-qovspar command syntax in
detail.

Confidential and Proprietary Information of ZTE CORPORATION

153

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

qovsid

Assign QoVS number.

loss

Assign threshold package loss.

delay

Assign delay Threshold.

jitter

Assign jitter threshold.

The following table describes mod-qovspar command variables.


Variable

Description

qovsid

Assign QoVS number. Range: 1 ~ 5

loss

Packet loss. Range: 0 ~ 100

delay

Delay threshold value. Range: 0 ~ 1000 ms

jitter

Jitter threshold value. Range: 0 ~ 1000 ms

MSAG(ag)#
The following example shows how to modify quality of service
parameters.

get-allqovspar

get-allqovspar
Syntax
Purpose

To display all QoVS parameters information

Syntax
Description

None

Usage
Guidelines

None

Mode
Example

154

get-allqovspar

MSAG(ag)#
The following example shows how to display parameters
information of get-allqovspar command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

mod-qovspar

md5info
This section describes md5info commands.

add-md5info
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

add-md5info [id id] [G


[PLength Plength] [P P]

G]

[Ki

Ki]

[mginfo

mginfo]

To add md5 information


The following table describes add-md5info command syntax in
detail.
Parameter

Description

id

Assign MD5 number.

Assign G value.

Ki

Assign initial key.

mginfo

Assign media gateway information.

PLength

Assign module value.

Assign module.

The following table describes add-md5info command variables.


Variable

Description

id

MD5 number. Range: 1 ~ 10

G: 2/3/5/7/9 (default: 2)

Ki

Initial key: Maximum length is 128 (default:


0123456789ABCDE).

mginfo

Media gateway information: Maximum length is 128

PLength

Module value. Range: 1 ~ 256

Module P value is not specified, it may be any value


with specific length.

MSAG(ag)#
The following example shows how to add md5 information.

Confidential and Proprietary Information of ZTE CORPORATION

155

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

del-md5info
mod-md5info
get-md5info

del-md5info
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

del-md5info {id id}


To delete md5 information
The following table describes del-md5info command syntax in
detail.
Parameters

Description

id

Assign MD5 number.

The following table describes del-md5info command variables.


Variable

Description

id

MD5 number. Range: 1 ~ 10

MSAG(ag)#
The following example shows how to delete md5 information.

add-md5info
mod-md5info
get-md5info

mod-md5info
Syntax
Purpose
Syntax
Description

156

mod-md5info {id id} [G G] [Ki Ki] [mginfo mginfo] [PLength


Plength] [P P]
To modify md5 information
The following table describes mod-md5info command syntax in
detail.
Parameter

Description

id

Assign MD5 number.

Assign G value.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

Ki

Assign initial key.

mginfo

Assign Media gateway information.

PLength

Assign Module value.

Assign module.

The following table describes mod-md5info command variables.


Variable

Description

id

MD5 number. Range: 1 ~ 10

G: 2/3/5/7/9 (default: 2)

Ki

Initial key: Maximum length is 128 (default:


0123456789ABCDE)

mginfo

Media gateway information: Maximum length is 128

PLength

Module value. Range: 1 ~ 256

Module P value is not specified, it may be any value


with specific length.

MSAG(ag)#
The following example shows how to modify md5 information.

del-md5info
add-md5info
get-md5info

get-md5info
Syntax
Purpose
Syntax
Description

Usage
Guidelines

get-md5info {id id}


To display md5 information
The following table describes get-md5info command syntax in
detail.
Parameter

Description

id

Assign MD5 ID.

The following table describes get-md5info command variables.

Confidential and Proprietary Information of ZTE CORPORATION

157

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Example

Related
Commands

Variable

Description

id

MD5 ID. Range: 1 ~ 10

MSAG(ag)#
The following example shows how to display md5 information.

add-md5info
mod-md5info
del-md5info

check-db
Syntax
Purpose

To check whether the db is same with flash

Syntax
Description

None

Usage
Guidelines

None

Mode
Example

Related
Commands

158

check-db

MSAG(ag)#
The following example shows how to check whether the db is the
same with flash.

None

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

ring
This section describes ring commands.

mod-ring
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

mod-ring [mgid mgid] [immediaattr immediaattr] [immediaon


immediaon] [immediaoff immediaoff] [ringprofile ringprofile]
To modify the ringing times
The following table describes mod-ring command syntax in
detail.
Parameter

Description

mgid

Assign media Gateway ID.

immediaattr

Assign immediate ring mode.

immediaon

Assign ring on time (10 ms).

immediaoff

Assign ring off time (10 ms).

ringprofile

Assign ring profile.

The following table describes mod-ring command variables.


Variable

Description

mgid

Media gateway ID. Range: 1 ~ 3 (default: 1)

immediaattr

Immediate ring mode: 1 - cid immedia ring, 2 - all


immedia ring, and 3 - no immedia ring (default: 1)

immediaon

Ring on time. Range: 30 ~ 120

immediaoff

Ring off time. Range: 200 ~ 400

ringprofile

Ring profile: 1 - MAINLAND, 2 - HONGKONG, 3 SINGAPORE (default: 1)

MSAG(ag)#
The following example shows how to modify ringing times.

get-ring
mod-ringprofile
get-ringprofile
load-dftringprof

Confidential and Proprietary Information of ZTE CORPORATION

159

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

get-ring
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

get-ring [mgid mgid]


To display ringing time parameters
The following table describes get-ring command syntax in
detail.
Parameter

Description

mgid

Assign media gateway ID.

The following table describes get-ring command variables.


Variable

Description

mgid

Media gateway ID. Range: 1 ~ 3

MSAG(ag)#
The following example shows how to get ringing time.

mod-ring
mod-ringprofile
get-ringprofile
load-dftringprof

mod-ringprofile
Syntax

Purpose
Syntax
Description

160

mod-ringprofile {ringprofile ringprofile | id id} [time time]


[on1 on1] [off1 off1] [on2 on2] [off2 off2] [on3 on3] [off3
off3] [on4 on4] [off4 off4] [on5 on5] [off5 off5]
To modify ringing profile
The following table
syntax in detail.

describes

mod-ringprofile

Parameter

Description

ringprofile

Assign ring pattern profile.

id

Assign ring pattern ID.

time

Assign time in seconds.

on1

Assign ring 1 is ON.

Confidential and Proprietary Information of ZTE CORPORATION

command

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Mode
Example

Related
Commands

Parameter

Description

off1

Assign ring 1 is OFF.

on2

Assign ring 2 is ON.

off2

Assign ring 2 is OFF.

on3

Assign ring 3 is ON.

off3

Assign ring 3 is OFF.

on4

Assign ring 4 is ON.

off4

Assign ring 4 is OFF.

on5

Assign ring 5 is ON.

off5

Assign ring 5 is OFF.

The following
variables.

table

describes

mod-ringprofile

command

Variable

Description

ringprofile

Ring pattern profile: 1 - MAINLAND, 2 HONGKONG,


3 - SINGAPORE

id

Ring pattern ID. Range: 0 ~ 15

time

Time in seconds. Range: 0 ms ~ 10 ms

on1

Ring 1 on. Range: 0 ~ 65535

off1

Ring 1 off. Range: 0 ~ 65535

on2

Ring 2 on. Range: 0 ~ 65535

off2

Ring 2 off. Range: 0 ~ 65535

on3

Ring 3 on. Range: 0 ~ 65535

off3

Ring 3 off. Range: 0 ~ 65535

on4

Ring 4 on. Range: 0 ~ 65535

off4

Ring 4 off. Range: 0 ~ 65535

on5

Ring 5 on. Range: 0 ~ 65535

off5

Ring 5 off. Range: 0 ~ 65535

MSAG(ag)#
The following example shows how to modify ringing profile.

mod-ring
get-ring
get-ringprofile
load-dftringprof

Confidential and Proprietary Information of ZTE CORPORATION

161

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

get-ringprofile
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Example

Related
Commands

get-ringprofile {ringprofile ringprofile}


To get ringing profile
The following table
syntax in detail.

describes

Parameter

Description

ringprofile

Assign ring pattern profile.

The following
variables.

table

describes

ringprofile

Ring pattern: 1 - MAINLAND, 2 - HONGKONG, 3 SINGAPORE

MSAG(ag)#
The following example shows how to display ringing profile
information.

mod-ring
get-ring

load-dftringprof

162

command

Description

load-dftringprof

Purpose

get-ringprofile

command

Variable

mod-ringprofile

Syntax

get-ringprofile

load-dftringprof
To load default ring profile

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Syntax
Description
Usage
Guidelines
Mode
Example

Related
Commands

None
This command is used to load the default ring profile such
Mainland, Hongkong, and Singapore.
MSAG(ag)#
The following example shows how to load default ringing profile.

mod-ring
get-ring
mod-ringprofile
get-ringprof

mod-permatone
Syntax

Purpose
Syntax
Description

mod-permatone {area area} {toneid


totaltime] [cadency1 cadency1] [cadency2
cadency3] [cadency4 cadency4] [cadency5
cadency6] [ts1 ts1] [ts2 ts2] [ts3
nexttoneflag]

toneid} [totaltime
cadency2] [cadency3
cadency5] [cadency6
ts3] [nexttoneflag

To modify permanent ringing tone


The following table describes mod-permatone command syntax
in detail.
Parameter

Description

area

Assign permanent tone area.

toneid

Assign permanent tone ID.

totaltime

Assign broadcast transmitting tone.

cadency1

Assign time connected to TS1.

cadency2

Assign time connected to mute.

cadency3

Assign time connected to TS2.

cadency4

Assign time connected to mute.

cadency5

Assign time connected to TS3.

cadency6

Assign time connected to mute.

Ts1

Assign time slot 1.

Ts2

Assign time slot 2.

Ts3

Assign time slot 3.

nexttoneflag

Whether to play next tone or not.

Confidential and Proprietary Information of ZTE CORPORATION

163

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Example

Related
Commands

The following table describes mod-permtone command variables.


Variable

Description

area

Permanent tone area. Range: 1 ~ 3

toneid

Permanent tone ID. Range: 1 ~ 65535

totaltime

Broadcast transmitting tone. Range 0 ~ 65535.


(Default is 1800, unit: 100 ms)

cadency1

Time connected to TS1. Range: 0 ~ 65535

cadency2

Time connected to mute. Range: 0 ~ 65535

cadency3

Time connected to TS2. Range: 0 ~ 65535

cadency4

Time connected to mute. Range: 0 ~ 65535

cadency5

Time connected to TS3. Range: 0 ~ 65535

cadency6

Time connected to mute. Range: 0 ~ 65535

Ts1

Time slot 1. Range: 0 ~ 255

Ts2

Time slot 2. Range: 0 ~ 255

Ts3

Time slot 3. Range: 0 ~ 255

nexttoneflag

Next tone. Range: 0/1

MSAG(ag)#
The following example shows how to modify permanent ringing
tone.

get-permatone

get-permatone
Syntax
Purpose
Syntax
Description

164

get-permatone [area area] [toneid toneid]


To display permanent ringing tone parameters
The following table describes get-permatone command syntax
in detail.
Parameter

Description

area

Assign tone area.

toneid

Tone ID, all tone ID.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Mode
Example

Related
Commands

The following
variables.

table

describes

get-permatone

command

Variable

Description

area

Tone area. Range: 1 ~ 3 (default: All tone area)

toneid

Tone ID. Range: 1 ~ 65535

MSAG(ag)#
The following example shows how to display permanent ringing
tone.

mod-permatone

rip
This section describes rip commands.

add-rip-cnic
Syntax

Purpose
Syntax
Description

add-rip-cnic [rack rack | shelf shelf] {slot slot | phyport


phyport | ipno ipno} [srcip srcip | srcmask srcmask | destip
destip | destmask destmask] {nexthop nexthop}
To add next hop to a NIC port IP
The following table provides parameter description.

Confidential and Proprietary Information of ZTE CORPORATION

165

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Examples

Related
Commands

166

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port.

ipno

Assign IP number.

srcip

Assign source IP address.

srcmask

Assign source mask address.

destip

Assign destination IP address.

destmask

Assign mask address of destination.

nexthop

Assign next hop IP address.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10

phyport

Physical port: 5

ipno

IP number. Range: 2 ~ 7

srcip

Source IP address value

srcmask

Source mask address value

destip

Destination IP address value

destmask

Destination mask address value

nexthop

Next hop IP address value

MSAG(ag)#
The following example shows add-rip-cnic command.

del-rip-cnic
get-rip-cnic

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

del-rip-cnic
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

del-rip-cnic [rack rack | shelf shelf] {slot slot | phyport


phyport|ipno ipno} [destip destip]
To delete the information about route
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port.

ipno

Assign IP.

destip

Assign destination IP address.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10

phyport

Physical port: 5

ipno

IP number. Range: 2 ~ 7

destip

Destination IP address value

MSAG(ag)#
The following example shows del-rip-cnic telnet command.

add-rip-cnic
get-rip-cnic

get-rip-cnic
Syntax
Purpose

get-rip-cnic [rack rack | shelf shelf] {slot slot} [phyport


phyport]
To show the route information

Confidential and Proprietary Information of ZTE CORPORATION

167

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides parameter description.


Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10

phyport

Physical port: 5

MSAG(ag)#
The following example shows get-rip-cnic command.

add-rip-cnic
del-rip-cnic

add-general-rip
Syntax
Purpose
Syntax
Description

Usage
Guidelines

168

add-general-rip [rack rack | shelf


phyport phyport|nexthop nexthop}

shelf]

To add next hop to an NIC port


The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port.

nexthop

Assign next hop IP address.

The following table provides variable description.

Confidential and Proprietary Information of ZTE CORPORATION

{slot

slot |

Chapter 7 Miscellaneous Commands

Mode
Examples

Related
Commands

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10

phyport

Physical port number: 5

nexthop

Next hop IP address value

MSAG(ag)#
The following example shows add-general-rip command.

del-general-rip

del-general-rip
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

del-general-rip
phyport phyport}

[rack

rack | shelf

shelf]

{slot

slot

To delete the next hop of NIC port


The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10

phyport

Physical port: 5

MSAG(ag)#
The following example shows del-general-rip command.

Confidential and Proprietary Information of ZTE CORPORATION

169

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

add-general-rip

add-rip-ctrl
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

170

add-rip-ctrl [rack rack | shelf shelf] {slot slot | phyport


phyport|destipdestip|destmask destmask|nexthop nexthop}
To add destination IP and next hop for control route
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

phyport

Assign physical port.

destip

Assign destination IP address.

destmask

Assign destination mask address.

nexthop

Assign next hop IP address.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number: 9/10

phyport

Physical port: 5

destip

Destination IP address value

destmask

Destination mask address value

nexthop

Next hop IP address value

MSAG(ag)#
The following example shows add-rip-ctrl command.

del-rip-ctrl
get-rip-ctrl

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

get-rip-ctrl
Syntax
Purpose

get-rip-ctrl
To show the information about control route

Syntax
Description

None

Usage
Guidelines

None

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows get-rip-ctrl command.

add-rip-ctrl
del-rip-ctrl

del-rip-ctrl
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

del-rip-ctrl {destip destip}


To delete the information about control route
The following table provides parameter description.
Parameter

Description

destip

Assign destination IP address.

The following table provides variable description.


Variable

Description

destip

Destination IP address value

MSAG(ag)#
The following example shows del-rip-ctrl command.

add-rip-ctrl
get-rip-ctrl

Confidential and Proprietary Information of ZTE CORPORATION

171

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

mednat
This section describes mednat commands.

add-mednat
Syntax

Purpose
Syntax
Description

Usage
Guidelines

172

add-mednat [mprrack mprrack | mprshelf mprshef] {mprslot


mprslot | mprsubcard mprsubcard} [nicrack nicrack | nicshelf
nicshelf] {nicslot nicslot | inphyport inphyport | exphyport
exphyport|exipaddr exipaddr|udpport udpport}
To add an inner route
The following table provides parameter description.
Parameter

Description

mprrack

Assign MPR rack.

mprshelf

Assign MPR shelf.

mprslot

Assign MPR slot.

mprsubcard

Assign MPR subcard.

nicrack

Assign CNIC rack.

nicshelf

Assign CNIC shelf.

nicslot

Assign CNIC slot.

inphyport

Assign CNIC inner physical port.

exphyport

Assign CNIC external physical port.

exipaddr

Assign external physical port IP address.

udport

Set UDP port.

The following table provides variable description.


Variable

Description

mprrack

MPR rack number. Range: 1 ~ 3 (default: 1)

mprshelf

MPR shelf number. Range: 0 ~ 4 (default: 0)

mprslot

MPR slot number: 8/11/12

mprsubcard

MPR subcard number. Range: 1 ~ 2; 1/2 - MPR, 1


- MRB

nicrack

CNIC rack number. Range: 1 ~ 3 (default: 1)

nicshelf

CNIC shelf number. Range: 0 ~ 4 (default: 0)

nicslot

CNIC slot number: 9/10

inphyport

CNIC inner physical port number: 5

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Mode
Examples

Related
Commands

Variable

Description

exphyport

CNIC external physical port number: 5

exipaddr

External physical port IP address value

udport

UDP port value. Range: 6000 ~ 65535

MSAG(ag)#
The following example shows add-mednat command.

del-mednat

del-mednat
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

del-mednat [mprrack mprrack | mprshelf mprshelf] {mprslot


mprslot|mprsubcard mprsubcard}
To delete an inner route
The following table provides parameter description.
Parameter

Description

mprrack

Assign MPR rack.

mprshelf

Assign MPR shelf.

mprslot

Assign MPR slot.

mprsubcard

Assign MPR subcard.

The following table provides variable description.


Variable

Description

mprrack

MPR Rack number. Range: 1 ~ 3 (default: 1)

mprshelf

MPR Shelf number. Range: 0 ~ 4 (default: 0)

mprslot

MPR Slot number: 8/11/12

mprsubcard

MPR subcard number. Range: 1 ~ 2; 1/2 - MPR, 1


- MRB

MSAG(ag)#
The following example shows del-mednat command.

Confidential and Proprietary Information of ZTE CORPORATION

173

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

add-mednat

ctrlnat
This section describes ctrlnat commands.

add-ctrlnat
Syntax

Purpose
Syntax
Description

Usage
Guidelines

Mode

174

add-ctrlnat [icsrack icsrack | icsshelf icsshelf] {icsslot


icsslot} [nicrack nicrack | nicshelf nicshelf] {nicslot nicslot |
inphyport inphyport|exphyport exphyport}
To add an inner protocol controlling route
The following table provides parameter description.
Parameter

Description

icsrack

Assign ICS rack.

icsshelf

Assign ICS shelf.

icsslot

Assign ICS slot.

nicrack

Assign CNIC rack.

nicshelf

Assign CNIC shelf.

nicslot

Assign CNIC slot.

inphyport

Set CNIC inner physical port.

exphyport

Set CNIC external physical port.

The following table provides variable description.


Variable

Description

icsrack

Rack number. Range: 1 ~ 3 (default: 1)

icsshelf

Shelf number. Range: 0 ~ 4 (default: 0)

icsslot

Slot number: 8/11/12

nicrack

CNIC rack number. Range: 1 ~ 2; 1/2 - MPR, 1 MPRB

nicshelf

CNIC shelf number. Range: 1 ~ 3 (default: 1)

nicslot

CNIC slot number. Range: 1 ~ 17

inphyport

CNIC inner physical port value: 5

exphyport

CNIC external physical port value: 5

MSAG(ag)#

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Examples

Related
Commands

The following example shows add-ctrlnat command.

del-ctrlnat
get-allnat

del-ctrlnat
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

del-ctrlnat [icsrack icsrack | icsshelf icsshelf] {icsslot


icsslot}
To delete an inner protocol controlling route
The following table provides parameter description.
Parameter

Description

icsrack

Assign ICS rack.

icsshelf

Assign ICS shelf.

icsslot

Assign ICS slot.

The following table provides variable description.


Variable

Description

icsrack

Rack number. Range: 1 ~ 3 (default: 1)

icsshelf

Shelf number. Range: 0 ~ 4 (default: 0)

icsslot

Slot number: 9/10

MSAG(ag)#
The following example shows del-ctrlnat command.

add-ctrlnat
get-allnat

get-allnat
Syntax
Purpose

get-allnat
To show all the inner routes

Confidential and Proprietary Information of ZTE CORPORATION

175

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Syntax
Description

None

Usage
Guidelines

None

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows get-allnat command.

add-ctrlnat
del-ctrlnat

digitmap
This section describes digitmap commands.

add-digitmap
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

176

add-digitmap {das das|dgtname dgtname} [dgtmap dgtmap]


To add a static digit map
The following table provides parameter description.
Parameter

Description

das

Assign digital analyzer selector.

dgtname

Assign digital name.

dgtmap

Set digital map.

The following table provides variable description.


Variable

Description

das

Das value. Range: 1 ~ 255

dgtname

DGT name value: 0

dgtmap

DGT map value: 0

MSAG(ag)#
The following example shows add-digitmap command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

del-digitmap

del-digitmap
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

del-digitmap {das das}


To delete a static digit map
The following table provides parameter description.
Parameter

Description

das

Assign digital analyzer selector.

The following table provides variable description.


Variable

Description

das

Das value. Range: 1 ~ 255

MSAG(ag)#
The following example shows del-digitmap command.

add-digitmap

9k52conn
This section describes 9k52conn commands.

mod-9k52conn
Syntax

mod-9k52conn
{conntype
conntype}
[odtrack
odtrack |
odtshelf odtshelf] [odtslot odtslot | chanAE1no chanAE1no |
chanAHW chanAHW] {chanATSBegin chanATSBegin | chanAAckTS
chanAAckTS} [chanBE1no chanBE1no | chanBHW chanBHW]
{chanBTSBegin chanBTSBegin|chanBAckTS chanBAckTS}

Purpose

To modify the connection between ZXMSG 9000 and ZXMSG


5200 through E1 or HW

Syntax
Description

The following table provides parameter description.

Confidential and Proprietary Information of ZTE CORPORATION

177

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Examples

178

Parameter

Description

conntype

Select connection type.

odtrack

Assign ODT rack.

odtshelf

Assign ODT shelf.

odtslot

Assign ODT slot.

chanAE1no

Assign E1 used by channel A.

chanAHW

Assign highway of channel A.

chanATSBegin

Assign beginning time slot of channel A.

chanAAckTS

Assign Ack time slot of channel A.

chanBE1no

Assign E1 r used by channel B.

chanBHW

Assign highway of channel B.

chanBTSBegin

Assign beginning time slot of channel B.

chanBAckTS

Assign ack time slot of channel B.

The following table provides variable description.


Variable

Description

conntype

Connection type. Range: 1 ~ 2; 1 - E1, 2 - HW

odtrack

Rack number. Range: 1 ~ 3

odtshelf

Shelf number. Range: 0 ~ 4

odtslot

Slot number. Range: 1 ~ 17

chanAE1no

E1 number (used by channel A). Range: 1 ~ 8

chanAHW

Highway number of channel A. Range: 8 ~ 11

chanATSBegin

Beginning time slot number of channel A. Range: 0


~ 127

chanAAckTS

Ack time slot of A channel. Range: 0 ~ 127

chanBE1no

E1 number (used by channel B). Range: 1 ~ 8

chanBHW

Highway number of channel B. Range: 8 ~ 11

chanBTSBegin

Beginning time slot number of channel B. Range: 0


~ 127

chanBAckTS

Ack time slot of channel B. Range: 0 ~ 127

MSAG(ag)#
The following example shows mod-9k52conn command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

get-9k52conn

get-9k52conn
Syntax
Purpose

get-9k52conn
To get the connection information when ZXMSG 9000 connects
with ZXMSG 5200 though E1 or HW

Syntax
Description

None

Usage
Guidelines

None

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows get-9k52conn command.

mod-9k52conn

dlink
This section describes dlink commands.

add-dlink-span
Syntax

Purpose
Syntax
Description

add-dlink-span [shelf shelf] {slot slot} [pcmno pcmno]


{link link | index index | iid iid | asid asid} [info info |
linknum linknum]
To add the dlink for 30B+D
The following table provides parameter description.
Parameter

Description

shelf

Assign shelf.

slot

Assign resource subcard slot.

pcmno

Assign PCM.

link

Assign link.

index

Set index.

iid

Assign user interface identifier.

asid

Assign as ID.

Confidential and Proprietary Information of ZTE CORPORATION

179

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Examples

Related
Commands

Parameter

Description

info

Define side information (i.e. Network side and user


side).

linknum

Assign link number.

The following table provides variable description.


Variable

Description

shelf

Rack number. Range: 1 ~ 3 (default: 1)

slot

Rack number. Range: 1 ~ 17 (default: 0)

pcmno

PCM number. Range: 1 ~ 8

link

Link value. Range: 1 ~ 128

index

Index number. Range: 0 ~ 30; (0...31) - E1,


(0...23) - T1

iid

User interface identifier number value. Range: 1 ~


128

asid

As ID. Range: 1 ~ 128

info

Side information. Range: 0 ~ 1; 0 - Network side,


1 - user side)

linknum

Link number. Range: 1 ~ 8

MSAG(ag)#
The following example shows add-dlink-span command.

del-dlink-span
get-dlink

del-dlink-span
Syntax
Purpose
Syntax
Description

180

del-dlink-span {link link} [num num]


To delete the dlink
The following table provides parameter description.
Parameter

Description

link

Assign link.

num

Assign link number.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides variable description.


Variable

Description

link

Link value. Range: 1 ~ 128

num

Link number (Number of links to be created).


Range: 1 ~ 8

MSAG(ag)#
The following example shows del-dlink-span command.

add-dlink-span
get-dlink

get-dlink
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-dlink [link link]


To get the link
The following table provides parameter description.
Parameter

Description

link

Assign link ID.

The following table provides variable description.


Variable

Description

link

Link ID number. Range: 1 ~ 128

MSAG(ag)#
The following example shows get-dlink command.

add-dlink-span
del-dlink-span

mod-dlinkattr
Syntax
Purpose

mod-dlinkattr {link link} [asid asid]


To configure the link attributes for 30B+D

Confidential and Proprietary Information of ZTE CORPORATION

181

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides parameter description.


Parameter

Description

link

Assign link ID.

asid

Assign as ID.

The following table provides variable description.


Variable

Description

link

Link ID number. Range: 1 ~ 128

asid

AS ID number. Range: 1 ~ 128

MSAG(ag)#
The following example shows mod-dlinkattr command.

get-dlinkattr

get-dlinkattr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

182

get-dlinkattr [link link]


To add the link attribute
The following table provides parameter description.
Parameter

Description

link

Assign link ID.

The following table provides variable description.


Variable

Description

link

Link ID number. Range: 1 ~ 128

MSAG(ag)#
The following example shows get-dlinkattr command.

mod-dlinkattr

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

mod-pcmattr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

mod-pcmattr [rack rack | shelf shelf] {slot slot pcmno pcmno}


[linecode linecode | frametag frametag | iscrc iscrc]
To modify Pulse Code Modulation attribute
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

pcmno

Assign PCM number.

linecode

Specify line code type.

frametag

Specify frame tag type.

iscrc

Is Cyclic redundancy Check needed or not.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 0

slot

Slot number. Range: 8 ~ 8

pcmno

Pulse code modulation value.

linecode

Line code type. Range:

frametag

Examples

- AMI

- B8ZS

- HDB3

Frame tag. Range:


128

- T1_F4

129

- T1_F12

130

- T1_F16

131

- T1_ESF

132

- T1_F72

Cyclic Redundancy Check option. Range:

iscrc

Mode

- CRC

- NOCRC

MSAG(ag)#
The following example shows mod-pcmattr command.

Confidential and Proprietary Information of ZTE CORPORATION

183

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

del-ddnconn

attrib
This section describes attrib commands.

mod-slcattrib
Syntax

Purpose
Syntax
Description

Usage
Guidelines

184

Mod-slcattrib [rack rack | shelf shelf] {slot slot}


[circuitb beginningcircuit | circuite endingcircuit | dftevent
dftevent | mdtype mdtype | faxmode faxmode | qovsid qovsid |
cidtype cidtype | imtype imtype | userclass userclass |
ecenable ecenable]
To modify the subscriber line circuits attribute
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

circuitb

Assign circuit.

circuite

Assign circuit E.

dftevent

Assign default event.

mdtype

Assign modify type.

faxmode

Assign fax mode.

qovsid

Assign QOVS profile identity.

cidtype

Assign CID.

userclass

Assign user class.

ecenable

Assign EC status

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

beginningcircuit

Beginning circuit number. Range: 0 ~ 65535

endingcircuit

Ending circuit number. Range: 0 ~ 65535

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Variable

Description

dftevent

Default detects events on the circuit. Range:


1

- HANG OFF

- HANG ON

- BEAT

- RECEIVE

16

- OBSTACLE

32

- WARNING

64

- RTP CHANGE

The modify type. Range:

mdtype

- DELETE

- MODIFY

Fax mode. Range:

faxmode

0
1

- T.38

- RTP

- FAST MODEM

- FAST FAX

qovsid

Qovs profile identity. 0 means disable qovs.


Range: 0 ~ 5

cidtype

CID type. Range:


1
2

userclass

Related
Commands

- NORMAL

- BT3

- BT5

User class. Range:


0

- NORMAL

- VIP

EC enable. Range:

ecenable

Examples

- DTMF
- FSK

Impedence type. Range:

imtype

Mode

- T.30

- enable

- disable

- default

MSAG(ag)#
The following example shows mod-slcattrib command.

None

Confidential and Proprietary Information of ZTE CORPORATION

185

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

get-slcattrib
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

186

get-slcattrib [rack rack | shelf shelf] {slot


[circuitb beginningcircuit | circuite endingcircuit]
To show subscriber line circuits attribute
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

circuitb

Assign beginning circuit.

circuite

Assign ending circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

beginningcircuit

Beginning circuit number. Range: 0 ~ 65535

endingcircuit

Ending circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows get-slcattrib command.

mod-slcattrib

Confidential and Proprietary Information of ZTE CORPORATION

slot}

Chapter 7 Miscellaneous Commands

mod-ipsattrib
Syntax

Purpose
Syntax
Description

Usage
Guidelines

Mod-ipsattrib [rack rack | shelf shelf] {slot slot| subcard


subcard} [circuitb circuitb | circuite circuite | muxtype
muxtype | muxmdtp muxmodifytype | ptmin ptmin | ptmax ptmax]
To modify the IPs circuits attribute
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

subcard

Assign sub card.

circuitb

Assign circuit B.

circuite

Assign circuit E.

muxtype

Assign multiplexer type.

muxmdtp

Assign multiplexer modify type.

ptmin

Assign minimum time.

ptmax

Assign maximum time.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

subcard

Sub card. Range: 1 ~ 2

circuitb

Beginning circuit number. Range: 0 ~ 65535

circuite

Ending circuit number. Range: 0 ~ 65535

muxtype

Multiplexer type. Range:

muxmodifytype

Ptmin

- H221

- H223

- H226

- V76

Multiplexer modify type. Range:


0

- DELETE

- MODIFY

Maximum time required to make a package.


Range: 0 ~ 65535

Confidential and Proprietary Information of ZTE CORPORATION

187

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

Variable

Description

ptmax

Minimum time required to make a package.


Range: 0 ~ 65535

MSAG(ag)#
The following example shows mod-ipsattrib command.

get-ipsattrib

get-ipsattrib
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

188

get-ipsattrib [rack rack | shelf shelf] {slot slot| subcard


subcard} [circuitb beginningcircuit | circuite endingcircuite]
To show the IPs circuits attribute
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

subcard

Assign sub card.

circuitb

Assign beginning circuit.

circuite

Assign ending circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

subcard

Sub card. Range: 1 ~ 2

beginningcircuit

Beginning circuit number. Range: 0 ~ 65535

endingcircuit

Ending circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows get-ipsattrib command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

mod-ipsattrib

mod-dspattrib
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode

Mod-dspattrib [rack rack | shelf shelf] {slot slot | dspno


dspnumber dspkind dspkind}
To modify digital signal process attribute.
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

Slot

Assign slot.

dspno

Assign DSP number.

dspkind

Assign DSP kind.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

dspnumber

Digital signal processing number. Range: 1 ~ 2

dspkind

Digital signal processing kind. Range:


1

- DTMF

- TONE

- CID

- MFC

- CONF

MSAG(ag)#

Confidential and Proprietary Information of ZTE CORPORATION

189

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Examples

Related
Commands

The following example shows mod-dspattrib command.

get-dspattrib

get-dspattrib
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

190

get-dspattrib [rack rack | shelf shelf] {slot slot dspno


dspnumber}
To show digital signal process attribute
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

Slot

Assign slot.

dspno

Assign DSP number.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

dspnumber

Digital signal processing number. Range: 1 ~ 2

MSAG(ag)#
The following example shows get-dspattrib command.

mod-dspattrib

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

slc
This section describes slc commands.

add-slctermid
Syntax

Purpose
Syntax
Description

Usage
Guidelines

add-slctermin [rack rack | shelf shelf] {beginslot beginslot}


[beginindex beginindex] {num num tmidfix tmidfix} [type type
| digitlen digitlength | begno beginno | mgid mgid]
To add a termination identity to SLC
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

beginslot

Assign beginning slot.

beginindex

Assign beginning index.

num

Assign num.

tmidfix

Assign terminal fix identity.

type

Assign type.

digitlen

Assign digit length.

begno

Assign beginning number.

mgid

Assign media gateway identity.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

beginslot

Slot number. Range: 1 ~ 17

beginindex

Beginning index number. Range: 0 ~ 31

num

Num. Range: 1 ~ 192

tmidfix

Fix part of termination identity. Range: <string>

type

User type. Range: 1 ~ 3


Type1: USER00100100000 ~ USER00100100031
Type2: USER0 ~ USER31
Type3: USER000 ~ USER031

digitlength

Digit length. Range: 2 ~ 64

Confidential and Proprietary Information of ZTE CORPORATION

191

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

Variable

Description

beginno

Beginning number. Range: 0 ~ 65535

mgid

Media gateway identity. Range: 1 ~ 255

MSAG(ag)#
The following example shows add-slctermid command.

get-slctermid
del-slctermid

del-slctermid
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

192

del-slctermin [rack rack | shelf shelf] {beginslot beginslot}


[beginindex beginindex] {num num}
To delete SLC termination id
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

beginslot

Assign beginning slot.

beginindex

Assign beginning index.

num

Assign num.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

beginslot

Slot number. Range: 1 ~ 17

beginindex

Beginning index number. Range: 0 ~ 31

num

Num. Range: 1 ~ 192

MSAG(ag)#
The following example shows del-slctermid command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

add-slctermid
get-slctermid

get-slctermid
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

del-slctermin [rack rack | shelf


[cirbegin begincircuit| cirend endcircuit]

shelf]

{slot

slot}

To show SLC termination id


The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

cirbegin

Assign beginning circuit.

cirend

Assign ending circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

begincircuit

Beginning circuit number. Range: 0 ~ 65535

endcircuit

Ending circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows get-slctermid command.

add-slctermid
del-slctermid

Confidential and Proprietary Information of ZTE CORPORATION

193

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

get-slcwildcard
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-slcwildcard [rack rack | shelf shelf] {slot slot}


To show SLC wildcard
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slo1t

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows get-slctermid command.

None

ipstermid
This section describes ips commands.

add-ipstermid
Syntax

Purpose
Syntax
Description

194

add-ipstermid [rack rack | shelf shelf] {slot slot subcard


subcard tmidfix tmidfix} [type usertype | digitlen digitlength |
begno beginno | mgid mgid]
To add termination identity to an Ips circuit
The following table provides parameter description.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

subcard

Assign sub card.

tmidfix

Assign terminal fix identity.

type

Assign user type.

digitlen

Assign digit length.

begno

Assign beginning number.

mgid

Assign media gateway identity.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

subcard

Sub card number. Range: 1 ~ 2

tmidfix

Fix part of termination identity. Range: <string>

type

User type. Range: 1 ~ 3


Type1: USER00100100000 ~ USER00100100031
Type2: USER0 ~ USER31
Type3: USER000 ~ USER031

Mode
Examples

Related
Commands

digitlength

Digit length part. Range: 2 ~ 64

beginno

Beginning number. Range: 0 ~ 65535

mgid

Media gateway identity. Range: 1 ~ 255

MSAG(ag)#
The following example shows add-ipstermid command.

get-ipstermid
del-ipstermid

Confidential and Proprietary Information of ZTE CORPORATION

195

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

del-ipstermid
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

del-ipstermid [rack rack | shelf shelf] {slot slot subcard


subcard}
To delete termination identity of an Ips circuit
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

subcard

Assign sub card.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

subcard

Sub card number. Range: 1 ~ 2

MSAG(ag)#
The following example shows del-ipstermid command.

add-ipstermid
get-ipstermid

get-ipstermid
Syntax
Purpose
Syntax
Description

196

get-ipstermid [rack rack | shelf shelf] {slot slot subcard


subcard} [cirbegin circuitbegin | cirend circuitend]
To show termination identity of an Ips circuit
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Mode
Examples

Related
Commands

Parameter

Description

slot

Assign slot.

subcard

Assign sub card.

cirbegin

Assign beginning circuit number.

cirend

Assign ending circuit number.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

subcard

Sub card number. Range: 1 ~ 2

circuitbegin

Beginning circuit number. Range: 0 ~ 65535

circuitend

Ending circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows get-ipstermid command.

add-ipstermid
del-ipstermid

get-ipswildcard
Syntax
Purpose
Syntax
Description

get-ipswildcard [rack rack | shelf shelf] {slot slot}


To get wildcard of an Ips circuit
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

Confidential and Proprietary Information of ZTE CORPORATION

197

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows get-ipswildcard command.

None

rtppar
This section describes rtppar commands.

mod-rtppar-mpr
Syntax

Purpose
Syntax
Description

198

mod-rtppar-mpr
{parid
parameterid}
[vadval
vadval |
dtmfrlmod dtmfrelaylmode | pcmlaw pcmlaw | siltopcm
silencetopcm | dcfilter dcfilter | pcmtopkggain pcmtopkggain |
pkgtopcmgain pkgtopcmgain | conceal concealment | ecmdisabl
ecmdisable | speedlim speedlim | errrecov errorrecovered |
tcfproc
tcfproc
|
t38enable
t38enable
|
dtmfDuplex
dtmfDuplexer | numBeforeOff numBeforeOff | ignoreA ignoreA |
toneDuplex toneDuplex | decodadapt decodadapt]
To modify MPR real time protocol parameter
The following table provides parameter description.
Parameter

Description

parid

Assign parameter identity.

vadval

Assign voice activity detector.

dtmfrlmod

Assign DTMF relay mode.

pcmlaw

Assign PCM law.

siltopcm

Assign silence to PCM.

dcfilter

Assign DC filter.

pcmtopkggain

Assign PCM to PKG gain.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Parameter

Description

pkgtopcmgain

Assign PKG to PCM gain.

conceal

Assign packet loss concealment.

ecmdisabl

Assign ECM faxes in T.38.

speedlim

Assign speed limit.

errrecov

Assign error recovered.

tcfproc

Assign TCF procedure.

t38enable

Assign T.38 status.

dtmfDuplex

Assign DTMF duplexer.

numBeforeOff

Assign number before OFF.

ignoreA

Assign ignore A.

toneDuplex

Assign duplexer tone.

decodadapt

Assign decoder adapter.

The following table provides variable description.


Variable

Description

parid

Parameter identity number. Range: 1 ~ 254

vadval

Voice activity detector type. Range:


0

dtmfrelaylmode

- DISABLE

- DEFAULT SCHEME

- PT13 SCHEME

- NO SILENCE

DTMF relay mode type. Range:


0

- DISABLE

- DEFAULT SCHEME

- PT13 SCHEME

- NO SILENCE

PCM law type. Range:

pcmlaw

sliencetopcm

- A LAW

- U LAW

Silence to PCM type. Range:


0

- COMFORT NOISE

- SILENCE

DC filter status. Range:

dcfilter

- ENABLE

- DISABLE

pcmtopkggain

PCM to PKG gain. Range: 0 ~ 200

pkgtopcmgain

PKG to PCM gain. Range: 0 ~ 200

concealment

Packet loss concealment. Range:


0

- NOT REPLACE

Confidential and Proprietary Information of ZTE CORPORATION

199

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Variable

ecmdisable

speedlim

errorrecovered

tcfproc

t38enable

Mode
Examples

Related
Commands

200

Description
1

- WHITE LINE

- LAST LINE

ECM faxes in T.38. Range:


0

- ENABLE

- DISABLE

Speed limit value. Range:


0

- NO LIMIT

- 2400 bps

- 4800 bps

- 7200 bps

- 9600 bps

- 12000 bps

- 14400 bps

Error recovered type. Range:


0

- REDUNDANCY

- FEC

TCF procedure type. Range:


0

- Procedure 2

- Procedure 1

T.38 enable. Range:


0

- T30

- T38

- RTP

10

- HALF CONTROL

11

- FULL CONTROL

dtmfDuplexer

DTMF duplexer type. Range: 0 ~ 1

numBeforeOff

Number before OFF. Range: 0 ~ 7

ignoreA

Ignore A. Range: 0 ~ 1

toneDuplex

Duplexer tone. Range: 0 ~ 1

decodadapt

Decoder adapter type. Range: 0 ~ 1

MSAG(ag)#
The following example shows mod-rtppar-mpr command.

get-rtppar-mpr

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

get-rtppar-mpr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-rtppar-mpr [parid parameterid]


To get MPR real time protocol parameter
The following table provides parameter description.
Parameter

Description

parid

Assign parameter identity.

The following table provides variable description.


Variable

Description

parameterid

Parameter identity number. Range: 1 ~ 254

MSAG(ag)#
The following example shows get-rtppar-mpr command.

mod-rtppar-mpr
mod-rtppar-mprb
get-rtppar-mprb

Confidential and Proprietary Information of ZTE CORPORATION

201

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

mod-rtppar-mprb
Syntax

Purpose
Syntax
Description

202

mod-rtppar-mprb
{parid
parameterid}
[vadval
vadval |
g723rate g723rate | dcfilter dcfilter | dcfilter dcfilter |
siltopcm silencetopcm | pcmlaw pcmlaw | g711redundancy
g711redundancy | pkttopcmgain pktopcmgain | pcmtopktgain
pcmtopktgain | faxmode faxmode | modemmode modemmode |
ecmenable ecmenable | faxpage faxpage | t30message t30message
| speedlim speedlimit | tcfprocedure tcfprocedure | ecenable
ecenable | ectaillen ectaillength | ectxf ectxf | nlpaggress
nlpaggression | fsklevel fsklevel | nomdelay normaldelay]
To modify MPRB real time protocol parameter
The following table provides parameter description.
Parameter

Description

parid

Assign parameter identity.

vadval

Assign voice activity detector.

g723rate

Assign G.723 rate.

dcfilter

Assign DC filter.

siltopcm

Assign silence to PCM.

pcmlaw

Assign PCM law.

g711redundancy

Assign G.7 redundancy.

pcmtopktgain

Assign PCM to PKT gain.

pkttopcmgain

Assign PKT to PCM gain.

faxmode

Assign fax mode.

modemmode

Assign modem mode.

ecmenable

Assign ECM status.

faxpage

Assign fax page.

t30message

Assign T30 Message.

speedlim

Assign speed limit.

tcfprocedure

Assign TCF procedure.

ecenable

Assign EC status.

ectaillen

Assign EC tail length.

ectxf

Assign EC TXF.

nlpaggress

Assign NLP aggressiveness.

fsklevel

Assign frequency shift keying level.

mindelay

Assign minimum delay.

maxdelay

Assign maximum delay.

nomdelay

Assign normal delay.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

The following table provides variable description.


Variable

Description

parid

The parameter Identity number. Range: 1 ~ 254

vadval

Voice activity detector type. Range:


0

g723rate

- DISABLE

- DEFAULT SCHEME

- Reserved

G.723 rate. Range:


1

- HighRT-6.3kbps

- LowRT-5.3kbps

DC filter status. Range:

dcfilter

sliencetopcm

- ENABLE

- DISABLE

Silence to PCM type. Range:


0

- COMFORT NOISE

- SILENCE

PCM law type. Range:

pcmlaw

- a law(default)

- mu law

g711redundancy

G7.11 redundancy selection value. Range: 0 ~ 3


(default=1)

pcmtopktgain

PCM to PKT gain. Range: The gain is adjustable


in the range +20 dB

pkttopcmgain

PKT to PCM gain. Range: The gain is adjustable


in the range +20 dB

faxmode

Fax mode. Range:


0

modemmode

ecmenable

- fax robust

- T38 fax mode

- T30 transparent

11

- SS control fax

Modem mode. Range:


0

- modem delay 5s

- transparent

- modem immediate

- fax immediate

- cid immediate

ECM enable status. Range:


0

- prevent ecm

- allow ecm

faxpage

Fax page value. Range: 0 ~ 3

t30message

T.30 message value. Range: 0 ~ 7

Confidential and Proprietary Information of ZTE CORPORATION

203

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Variable

Description

Speedlimit

Speed limit value. Range:

tcfprocedure

ecenable

ectaillength

ectxf

Mode
Examples

Related
Commands

204

- 2400 bps

- 4800 bps

- 7200 bps

- 9600 bps

- 12000 bps

- 14400 bps

TCF procedure type. Range:


0

- Procedure 2

- Procedure 1

EC enable status. Range:


0

- disable

- enable

EC tail length. Range:


0

- 8 ms

- 16 ms

- 24 ms

- 32 ms

- 64 ms

15

- 128 ms

EC TXF type. Range:


0

- not-linear

- fixed transmit

nlpaggression

NLP steady state aggression value. Range: -32 ~


767,32767

fsklevel

FSK level. Range: 62 ~ 212 (0 db - (-15 db)).


Step is 0.1 db

mindelay

Minimum instantaneous time delay. Range: 0 ~


200 (default: 10)

maximumdelay

Maximum instantaneous time delay. Range: 0 ~


200 (default: 40)

normaldelay

Normal time delay. Range: 0 ~ 200 (default: 80)

MSAG(ag)#
The following example shows mod-rtppar-mprb command.

get-rtppar-mprb

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

get-rtppar-mprb
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-rtppar-mprb [parid parameterid]


To show MPRB real time protocol parameter
The following table provides parameter description.
Parameter

Description

parid

Assign parameter identity.

The following table provides variable description.


Variable

Description

parid

Parameter Identity number. Range: 1 ~ 254

MSAG(ag)#
The following example shows get-rtppar-mprb command.

mod-rtppar-mprb

Confidential and Proprietary Information of ZTE CORPORATION

205

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

mod-rtppar-miro
Syntax

Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

206

mod-rtppar-miro {parid parameterid} [ap ap | delmode


deletemode | delthreshold deletethreshold | echodc echodc|
hecfrz hecfrz | cng cng | conceal conceamentl | errrecov
errorrecovered]
To modify MIRO real time protocol parameter
The following table provides parameter description.
Parameter

Description

parid

Assign parameter identity.

ap

Assign AP.

delmode

Assign delete mode.

delthreshold

Assign delete threshold value.

echodc

Assign echo DC.

hecfrz

Assign HECFRZ.

cng

Assign CNG.

conceal

Assign Packet loss concealment.

errrecov

Assign error recovered.

The following table provides variable description.


Variable

Description

parid

Parameter Identity number. Range: 1 ~ 254

ap

AP value. Range: 0 ~ 65535

deletemode

Delete mode value. Range: 0 ~ 65535

deletethreshold

Delete threshold value. Range: 0 ~ 65535

echodc

Echo DC value. Range: 0 ~ 255

hecfrz

HECFRZ value. Range: 0 ~ 255

cng

CNG value. Range: 0 ~ 255

concealment

Packet loss concealment. Range: 0 ~ 255

errorrecovered

Error recovered type. Range: 0 ~ 255

MSAG(ag)#
The following example shows mod-rtppar-miro command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

get-rtppar-miro

get-rtppar-miro
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-rtppar-miro [parid parameterid]


To show MIRO real time protocol parameter
The following table provides parameter description.
Parameter

Description

parid

Assign parameter identity.

The following table provides variable description.


Variable

Description

parid

Parameter identity number. Range: 1 ~ 255

MSAG(ag)#
The following example shows get-rtppar-miro command.

mod-rtppar-miro

expar
This section describes expar commands.

mod-expar-mpr
Syntax

Purpose

mod-expar-mpr {parid parameterid} [g723rate G.723rate |


pckgendis pckgendis | dtmfpyld dtmfpayload | dtmfrepyld
dtmfrepyld
|
faxdatared
faxdataredundancy
|
t30msgred
T.30msgredundancy | masecenal masterechocenal | hdwecdis
hdwecdis | hecfrz hecfrz | ectxf ectxf | ectxm ectxm | ecrxm
ecrxm | heclen heclen | lpwmin lpwmin | lpwmax lpwmax| lpr
lpr | fsklevel fsklevel | g711red G.711redundancy | modemmode
modemmode | ap adaptationperiod |deletmode deletemode |
nortptime nortptime | faxswtime faxswitchtime]
To modify MPR real time protocol parameter

Confidential and Proprietary Information of ZTE CORPORATION

207

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Syntax
Description

Usage
Guidelines

The following table provides parameter description.


Parameter

Description

parid

Assign parameter identity.

g723rate

Assign G.723 rate.

pckgendis

Assign packet generation status.

dtmfpyld

Assign DTFM payload.

dtmfrepyld

Assign DTMF redundant payload.

faxdatare

Assign fax page data redundancy.

t30msgred

Assign T30 messages redundancy

masecenal

Assign master echo canceller.

hdwecdis

Assign EC status.

hecfrz

Assign hardware EC freeze coefficient.

ectxf

Assign fixed transmit gain.

ectxm

Assign transmit mute.

ecrxm

Assign receive mute.

heclen

Assign network echo canceller tail length.

lpwmin

Assign late packet window minimum value.

lpwmax

Assign late packet window maximum value

lpr

Assign late packet ratio.

fsklevel

Assign Frequency Shift Keying level.

g711redundancy

Assign G.7 redundancy.

modemmode

Assign modem mode.

ap

Assign adaptation period.

deletemode

Assign deletion mode.

nortptime

Assign No RTP packet check time.

faxswtime

Assign fax switch time.

The following table provides variable description.


Variable

Description

parameterid

Parameter identity. Range: 1 ~ 254

G.723rate

G.723 rate. Range:

pckgendis

dtmfpayload

208

- LOW RATE

- HIGH RATE

Packet generation status. Range:


0

- ENABLE

- DISABLE

DTMF payload value. Range: 0 ~ 255

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Variable

Description

dtmfrepyld

DTMF redundant payload value. Range: 0 ~


255

faxdataredundancy

Fax page data redundancy. Range: 0 ~ 200

T.30msgredundancy

T30 messages redundancy. Range: 0 ~ 7

masterechocenceller

Master echo canceller. Range:

hdwecdis

- ENABLE

- DISABLE

Hardware echo canceller coefficient freeze or


allow. Range:
0

- ENABLE

- DISABLE

Hardware echo canceller coefficient freeze.


Range:

hecfrz

- Allow update

- Disable update

Fixed transmit gain. Range:

ectxf

- non-linear

- fixed gain

Fax page value. Range:

ectxm

- Normal

- Mute

Fax mode. Range:

ecrxm

- Normal

- Mute

heclen

Network EC tail length value. Range: 0 ~ 15

lpwmin

Late packet window minimum value. Range: 0 ~


255

lpwmax

Late packet window maximum value. Range: 0


~ 255

lpr

Late packet window initial value. Range: 0 ~


255

FSKlevel

FSK tone amplitude level. Range: 62 ~ 182

G.711redundancy

G7.11 redundancy selection value. Range:

modemmode

- no redundancy

- 1 package

- 2 packages

- 3 packages

Modem mode. Range:


0

- modem delay 5s

- transparent

- modem immediate

- fax immediate

Confidential and Proprietary Information of ZTE CORPORATION

209

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Variable

Description
5

Mode
Examples

Related
Commands

- cid immediate

adaptationperiod

Adaptation period value. Range: 0 ~ 65535

deletmode

Delete mode. Range:


0

- SOFT

- Hard

nortptime

No RTP packet check time. Range: 0 ~ 65535

faxswitchtime

Fax switch time. Range: 0 ~ 65535

MSAG(ag)#
The following example shows mod-expar-mpr command.

get-expar-mpr

get-expar-mpr
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

210

get-expar-mpr [parid parameterid]


To show MPR external parameter
The following table provides parameter description.
Parameter

Description

parid

Assign parameter identity.

The following table provides variable description.


Variable

Description

parameterid

Parameter identity. Range: 1 ~ 254

MSAG(ag)#
The following example shows get-expar-mpr command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

mod-expar-mpr

mod-expar-mprb
Syntax

Purpose
Syntax
Description

Usage
Guidelines

mod-expar-mprb
{parid
parameterid}
[dtmfrelaymode
dtmfrelaymode | dtmfpyld dtmfpayload | dtmfrepyld dtmfrepyld |
nortptime nortptime | faxswtime faxswitchtime]
To modify MPRB real time protocol parameter
The following table provides parameter description.
Parameter

Description

parid

Assign parameter identity.

dtmfrelaymode

Assign DTMF relay mode.

dtmfpyld

Assign DTFM payload.

dtmfredundant

Assign DTMF redundant payload.

nortptime

Assign no RTP packet check time.

faxswtime

Assign fax switch time.

The following table provides variable description.

Confidential and Proprietary Information of ZTE CORPORATION

211

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

Variable

Description

parameterid

Parameter identity number. Range: 1 ~ 254

dtmfrelaymode

DTMF relay mode. Range:


1

- VOICE CODING

- Red RFC2833

- AAL2/IETF

- nRed RFC2833

dtmfpayload

DTMF payload value. Range: 0 ~ 255

dtmfredundant

DTMF redundant payload value. Range: 0 ~ 255

nortptime

No RTP packet check time. Range: 0 ~ 65535

faxswitchtime

Fax switch time. Range: 0 ~ 65535

MSAG(ag)#
The following example shows mod-expar-mprb command.

get-expar-mprb

get-expar-mprb
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

212

get-expar-mprb [parid parameterid]


To show MPRB external parameter
The following table provides parameter description.
Parameter

Description

parid

Assign parameter identity.

The following table provides variable description.


Variable

Description

parameterid

Parameter identity. Range: 1 ~ 254

MSAG(ag)#
The following example shows get-expar-mprb command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

mod-expar-mprb

tline
This section describes tline commands.

get-tlineinfo
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-tlineinfo {tline testline}


To show test line information
The following table provides parameter description.
Parameter

Description

tline

Assign test line.

The following table provides variable description.


Variable

Description

testline

Test line. Range: 1 ~ 5

MSAG(ag)#
The following example shows get-tlineinfo command.

mod-tlinegroup

Confidential and Proprietary Information of ZTE CORPORATION

213

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

mod-tlinegroup
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

mod-tlinegroup {tline testline} [group group]


To modify test line group
The following table provides parameter description.
Parameter

Description

tline

Assign test line.

group

Assign group.

The following table provides variable description.


Variable

Description

testline

Test line. Range: 1 ~ 5

group

Group type. Range: 1 ~ 5

MSAG(ag)#
The following example shows mod-tlineinfo command.

get-tlineinfo

trunk
This section describes trunk commands.

del-trunkslctermid
Syntax
Purpose
Syntax
Description

214

del-trunkslctermin [rack rack | shelf shelf] {slot slot |


pcmno pcmnumber}
To delete trunk SLC termination identity
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

pcmno

Assign Pulse Code Modulation number.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 8 ~ 8

pcmnumber

Pulse Code Modulation number. Range: 1 ~ 8

MSAG(ag)#
The following example shows del-trunkslctermid command.

get-trunkslctermid
add-trunkslctermid

add-trunkslctermid
Syntax

Purpose
Syntax
Description

Usage
Guidelines

add-trunkslctermin [rack rack | shelf shelf] {slot slot |


pcmno pcmnumber | tmidfix tmidfix} [type usertype | begno
beginnumber | mgid mgid]
To add trunk SLC termination identity
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

pcmno

Assign Pulse Code Modulation number.

tmidfix

Assign terminal fix identity.

type

Assign type.

begno

Assign beginning number.

mgid

Assign media gateway identity.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

Confidential and Proprietary Information of ZTE CORPORATION

215

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

Variable

Description

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 8 ~ 8

pcmnumber

Pulse Code Modulation number. Range: 1 ~ 8

tmidfix

Fix part of termination identity. Range: <string>

usertype

User type. Range: 1 ~ 2

beginnumber

Beginning number. Range: 0 ~ 65535

mgid

Media gateway identity number. Range: 1 ~ 255

MSAG(ag)#
The following example shows add-trunkslctermid command.

get-trunkslctermid
del-trunkslctermid

get-trunkslctermid
Syntax
Purpose
Syntax
Description

Usage
Guidelines

216

get-trunkslctermin [rack rack | shelf shelf] {slot slot |


pcmno pcmnumber} [cirbegin circuitbegin | cirend circuitend]
To show trunk SLC termination identity
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

pcmno

Assign Pulse Code Modulation number.

cirbegin

Assign beginning circuit.

cirend

Assign ending circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 8 ~ 8

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Mode
Examples

Related
Commands

Variable

Description

pcmnumber

Pulse Code Modulation number. Range: 1 ~ 8

circuitbegin

Beginning circuit number. Range: 0 ~ 65535

circuitend

Ending circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows get-trunkslctermid command.

add-trunkslctermid
add-trunkslctermid

get-trunkslcattrib
Syntax

Purpose
Syntax
Description

Usage
Guidelines

get-trunkslcattrib [rack rack | shelf shelf] {slot slot |


pcmno pcmnumber} [circuitb beginningcircuit | circuite
endingcircuit]
To show the attribute of a series of subscriber line circuits
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

pcmno

Assign Pulse Code Modulation number.

circuitb

Assign beginning circuit.

circuite

Assign ending circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 8 ~ 8

Confidential and Proprietary Information of ZTE CORPORATION

217

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

Variable

Description

pcmnumber

Pulse Code Modulation number. Range: 1 ~ 8

beginningcircuit

Beginning circuit number. Range: 0 ~ 65535

endingcircuit

Ending circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows get-trunkslcattrib command.

None

mod-trunkuser
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

218

mod-trunkuser {unit unit | sunit sunit| usermode usermode}


To modify trunk user
The following table provides parameter description.
Parameter

Description

unit

Assign unit.

sunit

Assign sub unit.

usermode

Assign user mode.

The following table provides variable description.


Variable

Description

unit

Unit. Range: 1 ~ 10

subunit

Sub unit. Range: 1 ~ 128

usermode

User mode. Range: 0 ~ 10

MSAG(ag)#
The following example shows mod-trunkslctermid command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

None

fixtonechip
This section describes fixtonechip commands.

mod-fixtonechip
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

mod-fixtonechip {fixtonechip fixtonechip}


To modify fix tone chip
The following table provides parameter description.
Parameter

Description

fixtonechip

Assign fix tone chip.

The following table provides variable description.


Variable

Description

fixtonechip

Fix tone chip. Range:


1

- DSP

- IPS

MSAG(ag)#
The following example shows mod-fixtonechip command.

get-fixtonechip

get-fixtonechip
Syntax
Purpose
Mode
Examples

get-fixtonechip
To show fix tone chip
MSAG(ag)#
The following example shows get-fixtonechip command.

Confidential and Proprietary Information of ZTE CORPORATION

219

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

mod-fixtonechip

tonpro
This section describes tonpro commands.

add-tonpro
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

add-tonpro
toneid}

{pkgid

pkgid

tonepro

toneprotocol

To add protocol tone


The following table provides parameter description.
Parameter

Description

pkgid

Assign package identity.

tonepro

Assign protocol tone.

toneid

Assign tone identity.

The following table provides variable description.


Variable

Description

pkgid

Package identity. Range:


7

- cg package

17

- au package

toneprotocol

Protocol tone. Range: 1 ~ 2000

toneid

Inner tone identity. Range: 1 ~ 65535

MSAG(ag)#
The following example shows add-tonpro command.

del-tonpro
mod-tonpro
get-tonpro

del-tonpro
Syntax

220

del-tonpro {pkgid pkgid | tonepro toneprotocol}

Confidential and Proprietary Information of ZTE CORPORATION

toneid

Chapter 7 Miscellaneous Commands

Purpose
Syntax
Description

Usage
Guidelines

To delete protocol tone


The following table provides parameter description.

Parameter

Description

pkgid

Assign package identity.

tonepro

Assign protocol tone.

The following table provides variable description.


Variable

Description

pkgid

Package type. Range:

toneprotocol

Mode
Examples

Related
Commands

- cg package

17

- au package

Protocol tone. Range: 1 ~ 2000

MSAG(ag)#
The following example shows del-tonpro command.

add-tonpro
mod-tonpro
get-tonpro

mod-tonpro
Syntax
Purpose
Syntax
Description

Usage
Guidelines

mod-tonpro
toneid}

{pkgid

pkgid

tonepro

toneprotocol

toneid

To modify protocol tone


The following table provides parameter description.
Parameter

Description

pkgid

Assign package identity.

tonepro

Assign protocol tone.

toneid

Assign tone identity.

The following table provides variable description.

Confidential and Proprietary Information of ZTE CORPORATION

221

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

Variable

Description

pkgid

Package type. Range:


7

- cg package

17

- au package

toneprotocol

Protocol tone. Range: 1 ~ 2000

toneid

Inner tone identity. Range: 1 ~ 65535

MSAG(ag)#
The following example shows mod-tonpro command.

add-tonpro
del-tonpro
get-tonpro

get-tonpro
Syntax
Purpose
Syntax
Description

Usage
Guidelines

get-tonpro [pkgid pkgid | tonepro toneprotocol]


To show protocol tone
The following table provides parameter description.
Parameter

Description

pkgid

Assign package identity.

tonepro

Assign protocol tone.

The following table provides variable description.


Variable

Description

pkgid

Package type. Range:

toneprotocol

Mode
Examples

222

- cg package

17

- au package

Protocol tone. Range: 1 ~ 2000

MSAG(ag)#
The following example shows get-tonpro command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

add-tonpro
mod-tonpro
del-tonpro

tonlst
This section describes tonlst commands.

add-tonlst
Syntax

Purpose
Syntax
Description

Usage
Guidelines

add-tonlst {tone tone} [code1 code1 | code2 code2 | code3


code3 | code4 code4 | code5 code5 | code6 code6] {kind kind}
[site1 site1 | site2 site2 | site3 site3 | site4 site4 | site5
site5 | vtype1 vtype1 | vtype2 vtype2 | vtype3 vtype3 |
vtype4 vtype4 | vtype5 vtype5]
To add tone list
The following table provides parameter description.
Parameter

Description

tone

Assign tone identity.

code1

Assign first code.

code2

Assign second code.

code3

Assign third code.

code4

Assign fourth code.

code5

Assign fifth code.

kind

Assign tone type.

site1

Assign first site.

site2

Assign second site.

site3

Assign third site.

site4

Assign fourth site.

site5

Assign fifth site.

vtype1

Assign variation tone type on first site.

vtype2

Assign variation tone type on second site.

vtype3

Assign variation tone type on third site.

vtype4

Assign variation tone type on fourth site.

vtype5

Assign variation tone type on fifth site.

The following table provides variable description.

Confidential and Proprietary Information of ZTE CORPORATION

223

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

224

Variable

Description

tone

Tone identity. Range: 1 ~ 65535

code1

First part of fix tone. Range: 1 ~ 65535

code2

Second part of fix tone. Range: 1 ~ 65535

code3

Third part of fix tone. Range: 1 ~ 65535

code4

Fourth part of fix tone. Range: 1 ~ 65535

code5

Fifth part of fix tone. Range: 1 ~ 65535

kind

Tone type. Range:


1

- TONE PERMANENT

- TONE SHARE

- TONE MONO

site1

First site of variation tone. Range: 0 ~ 5

site2

Second site of variation tone. Range: 0 ~ 5

site3

Third site of variation tone. Range: 0 ~ 5

site4

Fourth site of variation tone. Range: 0 ~ 5

site5

Fifth site of variation tone. Range: 0 ~ 5

vtype1

Variation tone type on first site. Range:


1

- DATE

- DIGIT

- DURATION

- CASH

- MONTH

- INTEGER

- SILENCE

- STRING

- TEXT

10

- TIME

11

- TONE

12

- WEEKDAY

vtype2

Variation tone type on second site. Range: 1 ~


12

vtype3

Variation tone type on third site. Range: 1 ~ 12

vtype4

Variation tone type on fourth site. Range: 1 ~ 12

vtype5

Variation tone type on fifth site. Range: 1 ~ 12

MSAG(ag)#
The following example shows add-tonlst command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

del-tonlst
mod-tonlst
get-tonlst

del-tonlst
Syntax
Purpose
Syntax
Description

Usage
Guidelines

del-tonlst {tone tone}


To delete tone list
The following table provides parameter description.
Parameter

Description

tone

Assign tone identity.

The following table provides variable description.


Variable

Description

tone

Tone identity.
Range: 1 ~ 65535

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows del-tonlst command.

add-tonlst
mod-tonlst
get-tonlst

mod-tonlst
Syntax

Purpose
Syntax
Description

mod-tonlst {tone tone} [code1 code1 | code2 code2 | code3


code3 | code4 code4 | code5 code5 | code6 code6 | kind kind
| site1 site1 | site2 site2 | site3 site3 | site4 site4 |
site5 site5 | vtype1 vtype1 | vtype2 vtype2 | vtype3 vtype3 |
vtype4 vtype4 | vtype5 vtype5]
To modify tone list
The following table provides parameter description.
Parameter

Description

tone

Assign tone identity.

code1

Assign first code.

Confidential and Proprietary Information of ZTE CORPORATION

225

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Parameter

Description

code2

Assign second code.

code3

Assign third code.

code4

Assign fourth code.

code5

Assign fifth code.

kind

Assign tone type.

site1

Assign first site.

site2

Assign second site.

site3

Assign third site.

site4

Assign fourth site.

site5

Assign fifth site.

vtype1

Assign variation tone type on first site.

vtype2

Assign variation tone type on second site.

vtype3

Assign variation tone type on third site.

vtype4

Assign variation tone type on fourth site.

vtype5

Assign variation tone type on fifth site.

The following table provides variable description.


Variable

Description

tone

Tone identity. Range: 1 ~ 65535

code1

First part of fix tone. Range: 1 ~ 65535

code2

Second part of fix tone. Range: 1 ~ 65535

code3

Third part of fix tone. Range: 1 ~ 65535

code4

Fourth part of fix tone. Range: 1 ~ 65535

code5

Fifth part of fix tone. Range: 1 ~ 65535

kind

Tone type. Range:


1
2

- TONE SHARE

- TONE MONO

site1

First site of variation tone. Range: 0 ~ 5

site2

Second site of variation tone. Range: 0 ~ 5

site3

Third site of variation tone. Range: 0 ~ 5

site4

Fourth site of variation tone. Range: 0 ~ 5

site5

Fifth site of variation tone. Range:

vtype1

Variation tone type on first site.. Range:


1

226

- TONE PERMANENT

- DATE

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Variable

Mode
Examples

Related
Commands

Description
2

- DIGIT

- DURATION

- CASH

- MONTH

- INTEGER

- SILENCE

- STRING

- TEXT

10

- TIME

11

- TONE

12

- WEEKDAY

vtype2

Variation tone type on second site. Range: 1 ~


12

vtype3

Variation tone type on third site. Range: 1 ~ 12

vtype4

Variation tone type on fourth site. Range: 1 ~ 12

vtype5

Variation tone type on fifth site. Range: 1 ~ 12

MSAG(ag)#
The following example shows mod-tonlst command.

add-tonlst
del-tonlst
get-tonlst

get-tonlst
Syntax
Purpose
Syntax
Description

Usage
Guidelines

get-tonlst {tone tone}


To show tone list
The following table provides parameter description.
Parameter

Description

tone

Assign tone identity.

The following table provides variable description.


Variable

Description

tone

Tone identity.
Range: 1 ~ 65535

Confidential and Proprietary Information of ZTE CORPORATION

227

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows get-tonlst command.

add-tonlst
mod-tonlst

tonlab
This section describes tonlab commands.

add-tonlab
Syntax
Purpose
Syntax
Description

Usage
Guidelines

228

add-tonlab {code code | type type label label}


To add tone label
The following table provides parameter description.
Parameter

Description

code

Assign tone code.

type

Assign code type.

label

Assign label.

The following table provides variable description.


Variable

Description

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Variable

Description

code

Tone code. Range: 1 ~ 65535

type

Tone resource type. Range:


2

Tone label. Range: 1 ~ 65535

label

Mode
Examples

Related
Commands

- TONE

MSAG(ag)#
The following example shows add-tonlab command.

mod-tonlab
get-tonlab
del-tonlab

del-tonlab
Syntax
Purpose
Syntax
Description

Usage
Guidelines

del-tonlab {code code | type type}


To delete tone label
The following table provides parameter description.
Parameter

Description

code

Assign tone code.

type

Assign code type.

The following table provides variable description.


Variable

Description

code

Tone code. Range: 1 ~ 65535

type

Tone resource type. Range:


2

Mode
Examples

Related
Commands

- TONE

MSAG(ag)#
The following example shows del-tonlab command.

add-tonlab
mod-tonlab
get-tonlab

Confidential and Proprietary Information of ZTE CORPORATION

229

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

mod-tonlab
Syntax
Purpose
Syntax
Description

Usage
Guidelines

mod-tonlab {code code | type type label label}


To modify tone label
The following table provides parameter description.
Parameter

Description

code

Assign tone code.

type

Assign code type.

label

Assign label.

The following table provides variable description.


Variable

Description

code

Tone code. Range: 1 ~ 65535

type

Tone resource type. Range:


2

label

Mode
Examples

Related
Commands

- TONE

Tone label. Range: 1 ~ 65535

MSAG(ag)#
The following example shows mod-tonlab command.

add-tonlab
get-tonlab
del-tonlab

get-tonlab
Syntax
Purpose
Syntax
Description

230

get-tonelab [code code | type type]


To show tone label
The following table provides parameter description.
Parameter

Description

code

Assign tone code.

type

Assign code type.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

The following table provides variable description.


Variable

Description

code

Tone code. Range: 1 ~ 65535

type

Tone resource type. Range:


2

Mode
Examples

Related
Commands

- TONE

MSAG(ag)#
The following example shows get-tonlab command.

add-tonlab
mod-tonlab
del-tonlab

get-slcstatus
Syntax
Purpose
Syntax
Description

Usage
Guidelines

get-slcstatus [rack rack | shelf shelf] {slot


[circuitb beginningcircuit | circuite endingcircuit]

slot}

To show subscriber line card status


The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

circuitb

Assign beginning circuit.

circuite

Assign ending circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

beginningcircuit

Beginning SLC circuit number. Range: 0 ~ 65535

endingcircuit

Ending SLC circuit number. Range: 0 ~ 65535

Confidential and Proprietary Information of ZTE CORPORATION

231

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows get-slcstatus command.

None

block-slc
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

232

block-slc [rack rack | shelf shelf] {slot slot} [circuitb


beginningcircuit | circuite endingcircuit]
To block subscriber line card
The following table provides parameter description.
Parameter

Description

name

Assign port name.

rack

Assign rack.

Shelf

Assign shelf.

slot

Assign slot.

circuitb

Assign beginning circuit.

circuite

Assign ending circuit.

The following table provides variable description.


Variable

Description

name

Port name. Range: <STRING>

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

beginningcircuit

Beginning SLC circuit number. Range: 0 ~ 65535

endingcircuit

Ending SLC circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows block-slc command.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Related
Commands

None

unblock-slc
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

unblock-slc [rack rack | shelf shelf] {slot slot} [circuitb


circuitb | circuite citcuite]
To unblock a series of SLC circuits.
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

circuitb

Set beginning of SLC circuit.

circuite

Set ending of SLC circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

circuitb

Beginning of SLC circuit number. Range: 0 ~


65535

circuite

Ending of SLC circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows unblock-slc command.

block-slc

Confidential and Proprietary Information of ZTE CORPORATION

233

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

ips
This section describes ips commands.

get-ipsstatus
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

234

get-ipsstatus [rack rack | shelf shelf] {slot slot | subcard


subcard} [circuitb circuitb | circuite citcuite]
To show the status of a series of IPS circuits
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

subcard

Assign subcard.

circuitb

Set beginning of IPS circuit.

circuite

Set ending of IPS circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

subcard

Subcard number. Range: 1 ~ 2; 1/2 - MPR, 1 MPRB)

circuitb

Beginning of IPS circuit number. Range: 0 ~


65535

circuite

Ending of IPS circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows get-ipsstatus command.

block-ips
unblock-ips

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

block-ips
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

block-ips [rack rack | shelf shelf] {slot slot | subcard


subcard} [circuitb circuitb | circuite citcuite]
To block a series of IPS circuits
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

subcard

Assign subcard.

circuitb

Set beginning of IPS circuit.

circuite

Set ending of IPS circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

subcard

Subcard number. Range: 1 ~ 2; 1/2 - MPR, 1 MPRB

circuitb

Beginning of IPS circuit number. Range: 0 ~


65535

circuite

Ending of IPS circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows block-ips command.

unblock-ips
get-ipsstatus

unblock-ips
Syntax

unblock-ips [rack rack | shelf shelf] {slot slot | subcard


subcard} [circuitb circuitb | circuite citcuite]

Confidential and Proprietary Information of ZTE CORPORATION

235

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

To unblock a series of IPS circuits


The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

subcard

Assign subcard.

circuitb

Set beginning of IPS circuit.

circuite

Set ending of IPS circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

subcard

Subcard number. Range: 1 ~ 2; 1/2 - MPR, 1 MPRB).

circuitb

Beginning of IPS circuit number. Range: 0 ~


65535

circuite

Ending of IPS circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows unblock-ips command.

block-ips
get-ipsstatus

conf
This section describes conf commands.

get-confstatus
Syntax

236

get-confstatus [rack rack | shelf shelf] {slot


[subcard subcard|circuitb circuitb | circuite citcuite]

Confidential and Proprietary Information of ZTE CORPORATION

slot}

Chapter 7 Miscellaneous Commands

Purpose

To show the status of a series of conference circuits

Syntax
Description

The following table provides parameter description.

Usage
Guidelines

Mode
Examples

Related
Commands

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

subcard

Assign subcard number.

circuitb

Set beginning of conference circuit.

circuite

Set ending of conference circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

subcard

Subcard number. Range: 1 ~ 2; 1 - MPR, 1/2 VCB

circuitb

Beginning of conference circuit number. Range: 0


~ 65535

circuite

Ending of conference circuit number. Range: 0 ~


65535

MSAG(ag)#
The following example shows get-confstatus command.

block-conf
unblock-conf

block-conf
Syntax
Purpose
Syntax
Description

block-conf [rack rack | shelf shelf] {slot slot} [subcard


subcard|circuitb circuitb | circuite citcuite]
To block a series of conference circuits
The following table provides parameter description.

Confidential and Proprietary Information of ZTE CORPORATION

237

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Examples

Related
Commands

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

subcard

Assign subcard number.

circuitb

Set beginning of conference circuit.

circuite

Set ending of conference circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

subcard

Subcard number. Range: 1 ~ 2; 1 - MPR, 1/2 VCB

circuitb

Beginning of conference circuit number. Range: 0


~ 65535

circuite

Ending of conference circuit number. Range: 0 ~


65535

MSAG(ag)#
The following example shows block-conf command.

get-confstatus
unblock-conf

unblock-conf
Syntax
Purpose
Syntax
Description

238

unblock-conf [rack rack | shelf shelf] {slot slot} [subcard


subcard|circuitb circuitb | circuite citcuite]
To unblock a series of conference circuits
The following table provides parameter description.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Mode
Examples

Related
Commands

Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

subcard

Assign subcard number.

circuitb

Set beginning of conference circuit.

circuite

Set ending of conference circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

subcard

Subcard number. Range: 1 ~ 2; 1 - MPR, 1/2 VCB

circuitb

Beginning of conference circuit number. Range: 0


~ 65535

circuite

Ending of conference circuit number. Range: 0 ~


65535

MSAG(ag)#
The following example shows unblock-conf command.

get-confstatus
block-conf

dsp
This section describes dsp commands.

get-dspstatus
Syntax

get-dspstatus [rack rack | shelf shelf] {slot slot | dspno


dspno} [circuitb circuitb | circuite citcuite]

Confidential and Proprietary Information of ZTE CORPORATION

239

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

To show the status of a series of DSP circuits


The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

dspno

Assign DSP.

circuitb

Set beginning of DSP circuit.

circuite

Set ending of DSP circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

dspno

DSP number. Range: 0 ~ 255

circuitb

Beginning of DSP circuit number. Range: 0 ~


65535

circuite

Ending of DSP circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows get-dspstatus command.

block-dsp
unblock-dsp

block-dsp
Syntax
Purpose
Syntax
Description

240

block-dsp [rack rack | shelf shelf] {slot slot | dspno dspno}


[circuitb circuitb | circuite citcuite]
To block a series of DSP circuits
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Mode
Examples

Related
Commands

Parameter

Description

slot

Assign slot.

dspno

Assign DSP.

circuitb

Set beginning of DSP circuit.

circuite

Set ending of DSP circuit.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

dspno

DSP number. Range: 0 ~ 255

circuitb

Beginning of DSP circuit number. Range: 0 ~


65535

circuite

Ending of DSP circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows block-dsp command.

get-dspstatus
unblock-dsp

unblock-dsp
Syntax
Purpose
Syntax
Description

unblock-dsp [rack rack | shelf shelf] {slot slot | dspno


dspno} [circuitb circuitb | circuite citcuite]
To unblock a series of DSP circuits
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

dspno

Assign DSP.

circuitb

Set beginning of DSP circuit.

circuite

Set ending of DSP circuit.

Confidential and Proprietary Information of ZTE CORPORATION

241

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

dspno

DSP number. Range: 0 ~ 255

circuitb

Beginning of DSP circuit number. Range: 0 ~


65535

circuite

Ending of DSP circuit number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows unblock-dsp command.

get-dspstatus
block-dsp

cardstat
This section describes cardstat commands.

get-cardstat-ips
Syntax
Purpose
Syntax
Description

242

get-cardstat-ips [rack rack | shelf shelf] {slot slot |


subcard subcard}
To show the status of specified IPS card
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

subcard

Assign subcard.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

subcard

Subcard number. Range: 1 ~ 2; 1/2 - ARP2, 1 ARP1

MSAG(ag)#
The following example shows get-cardstat-ips command.

get-cardstat-dsp
get-cardstat-conf

get-cardstat-conf
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

get-cardstat-conf [rack rack | shelf shelf] {slot slot}


To show the status of conference card
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows get-cardstat-conf command.

Confidential and Proprietary Information of ZTE CORPORATION

243

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Related
Commands

get-cardstat-ips
get-cardstat-dsp

get-cardstat-dsp
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-cardstat-dsp [rack rack | shelf shelf] {slot slot |


dspno dspno}
To show the status of DSP
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

dspno

Assign DSP.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

dspno

DSP number. Range: 0 ~ 255

MSAG(ag)#
The following example shows get-cardstat-dsp command.

get-cardstat-ips
get-cardstat-conf

bdstat
This section describes bdstat commands.

244

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

get-bdstat-s
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-bdstats-s [rack rack | shelf shelf] {slot slot}


To show the statistics of SLC cards
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows get-slcstatistic command.

None

get-bdstat-c
Syntax
Purpose
Syntax
Description

Usage
Guidelines

get-bdstat-c [rack rack | shelf shelf] {slot slot}


To show the status of specified board
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table provides variable description.

Confidential and Proprietary Information of ZTE CORPORATION

245

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

shelf

Shelf number. Range: 0 ~ 4 (default: 0)

slot

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows get-bdstat-c command.

get-bdstatus-s

ts
This section describes ts commands.

get-tsstatus
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

246

get-tsstatus [hw hw | ts ts]


To show the HW/TS status
The following table provides parameter description.
Parameter

Description

hw

Assign highway.

ts

Assign time slot.

The following table provides variable description.


Variable

Description

hw

Highway number. Range: 0 ~ 65535

ts

Time slot number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows get-tsstatus command.

block-ts
unblock-ts

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

block-ts
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

block-ts [hw hw | ts ts]


To block the time slot
The following table provides parameter description.
Parameter

Description

hw

Assign highway.

ts

Assign time slot.

The following table provides variable description.


Variable

Description

hw

Highway number. Range: 0 ~ 65535

ts

Time slot. Range: 0 ~ 65535

MSAG(ag)#
The following example shows block-ts command.

get-tsstatus
unblock-ts

unblock-ts
Syntax
Purpose
Syntax
Description

Usage
Guidelines

unblock-ts [hw hw | ts ts]


To unblock the time slot
The following table provides parameter description.
Parameter

Description

hw

Assign highway.

ts

Assign time slot.

The following table provides variable description.


Variable

Description

hw

Highway number. Range: 0 ~ 65535

ts

Time slot number. Range: 0 ~ 65535

Confidential and Proprietary Information of ZTE CORPORATION

247

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows unblock-ts command.

get-tsstatus
block-ts

statistic
This section describes statistic commands.

get-slcstatistic
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

248

get-slcstatistic [rack rack | shelf shelf]


To show the statistics of SLC cards
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

MSAG(ag)#
The following example shows get-slcstatistic command.

get-ipsstatistic

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

get-ipsstatistic
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-ipsstatistic [rack rack]


To show the statistics of IPS cards
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3 (default: 1)

MSAG(ag)#
The following example shows get-ipsstatistic command.

get-slcstatistic

get-sunitinfo
Syntax
Purpose
Syntax
Description

Usage
Guidelines

get-sunitinfo [rack rack | shelf shelf] {slot slot}


To show sunit information
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

slot

Assign slot.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

Confidential and Proprietary Information of ZTE CORPORATION

249

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows get-sunitinfo command.

None

get-tsconninfo
Syntax
Purpose
Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

get-tsconninfo {hw hw | ts ts}


To show HW/TS connection information
The following table provides parameter description.
Parameter

Description

hw

Assign highway.

ts

Assign time slot.

The following table provides variable description.


Variable

Description

hw

Highway number. Range: 0 ~ 65535

ts

Time slot number. Range: 0 ~ 65535

MSAG(ag)#
The following example shows get-tsconninfo command.

get-tsstatus

get-slnconninfo
Syntax
Purpose
Syntax
Description

250

get-slnconninfo {unit unit | sunit sunit | index index}


To show SLN connection information
The following table provides parameter description.
Parameter

Description

unit

Assign unit.

sunit

Assign sunit slot.

index

Assign index.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides variable description.


Variable

Description

unit

Unit number. Range: 1 ~ 128

sunit

Sunit slot number. Range: 1 ~ 128

index

Index number. Range: 0 ~ 239

MSAG(ag)#
The following example shows get-slnconninfo command.

None

get-resourcestat
Syntax
Purpose

get-resourcestat
To show statistics of resource

Syntax
Description

None

Usage
Guidelines

None

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows get-slnconninfo command.

None

get-board-slc
Syntax
Purpose
Syntax
Description

get-board-slc [rack rack | shelf shelf] {slot slot}


To show the get slc card type.
The following table provides parameter description.
Parameter

Description

rack

Assign rack.

shelf

Assign shelf.

Confidential and Proprietary Information of ZTE CORPORATION

251

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Usage
Guidelines

Mode
Examples

Related
Commands

Parameter

Description

slot

Assign slot.

The following table provides variable description.


Variable

Description

rack

Rack number. Range: 1 ~ 3

shelf

Shelf number. Range: 0 ~ 4

slot

Slot number. Range: 1 ~ 17

MSAG(ag)#
The following example shows get-board-slc command.

None

get-hwmap
Syntax
Purpose

get-hwmap
To get the information about highway map

Syntax
Description

None

Usage
Guidelines

None

Mode
Examples

Related
Commands

MSAG(ag)#
The following example shows get-hwmap command.

get-hwset

get-hwset
Syntax
Purpose
Syntax
Description

252

get-hwset
To get the information about highway set
None

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Miscellaneous Commands

Usage
Guidelines
Mode
Examples

Related
Commands

None

MSAG(ag)#
The following example shows get-hwset command.

get-hwmap

get-unitinfo
Syntax

get-unitinfo {unit unit}

Purpose

To get the unit information

Syntax
Description

Usage
Guidelines

Mode
Examples

Related
Commands

The following table provides parameter description.


Parameter

Description

unit

Assign unit.

The following table provides variable description.


Variable

Description

unit

Unit number. Range: 1 ~ 255

MSAG(ag)#
The following example shows get-unitinfo command.

None

init-agcmd-cfg
Syntax
Purpose

init-agcmd-cfg
To initialize agcmd.cfg

Syntax
Description

None

Usage
Guidelines

None

Confidential and Proprietary Information of ZTE CORPORATION

253

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

Mode
Examples

Related
Commands

254

MSAG(ag)#
The following example shows init-agcmd-cfg command.

None

Confidential and Proprietary Information of ZTE CORPORATION

Appendix

Abbreviations
Abbreviation

Full Name

ADSL

Asymmetrical Digital Subscriber Line

AG

Access Gateway

ATM

Asynchronous Transfer Mode

CPU

Center Process Unit

DDN

Digital Data Network

DHCP

Dynamic Host Control Protocol

DIB

Digital Interface Board

EPM

Environment Power Monitoring

EPON

Ethernet Passive Optical Network

HDSL

High-speed Digital Subscriber Line

HW

High Way

IGMP

Internet Group Management Protocol

ISDN

Integrated Service Digital Network

MGC

Media Gateway Controller

MGCP

Media Gateway Control Protocol

ODT

Octal Digital Trunk

OLT

Optical Line Terminal

ONU

Optical Network Unit

PCM

Pulse Code Modulation

PSPDN

Packet Switched Public Data Network

PSTN

Public Switch Telephone Network

QoS

Quality of Service

RTP

Real-time Transport Protocol

SHDSL

Single-Pair High Digital Subscriber Line

SLC

Subscriber Line Circuit

SS

SoftSwitch

Confidential and Proprietary Information of ZTE CORPORATION

255

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

256

Abbreviation

Full Name

SYC

Synchronization Control

TCI

Tag Control Information

ToS

Type of Service

TPID

Tag Protocol Identifier

TSLC

Test Subscriber Line Card

VDSL

Very High Speed Digital Subscriber Line

VoIP

Voice over Internet Protocol

VPN

Virtual Private Network

Confidential and Proprietary Information of ZTE CORPORATION

Figures
Figure 1 HyperTerminal Startup Window .............................2
Figure 2 Connect To Interface............................................2
Figure 3 COM1 Properties Interface ....................................3
Figure 4 HyperTerminal Command Line Interface .................3
Figure 5 Ping Command....................................................4
Figure 6 Telnet Command .................................................4
Figure 7 Telnet Command Line Interface .............................5
Figure 8 Starting NMS Server ............................................5
Figure 9 NMS Server Startup Window .................................6
Figure 10 NMS Server Startup Window ...............................6
Figure 11 Starting NMS Client............................................7
Figure 12 Login Window....................................................7
Figure 13 Common User Mode ...........................................8
Figure 14 Management User Mode......................................9
Figure 15 Management User Configuration Mode ................ 10
Figure 16 Super Mode .................................................... 10
Figure 17 Debug Mode.................................................... 11

Confidential and Proprietary Information of ZTE CORPORATION

257

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

This page is intentionally blank.

258

Confidential and Proprietary Information of ZTE CORPORATION

Tables
Table 1 Chapter Summary .............................................xvii
Table 2 Typographical Conventions.................................. xix
Table 3 Mouse Operation Conventions ............................. xix
Table 4 Common Command Variables ............................... 12

259

Confidential and Proprietary Information of ZTE CORPORATION

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

This page is intentionally blank.

260

Confidential and Proprietary Information of ZTE CORPORATION

Index
9k52conn......................... 177
add-as............................. 111
add-asasp ........................ 117
add-asp ........................... 114
add-board-epc .................... 96
add-board-mics .................. 78
add-board-mpr ................... 80
add-board-mprb ................. 82
add-board-odti ................. 122
add-board-odti-t1 ............. 123
add-board-pnp ................... 96
add-board-pwr ................... 88
add-board-pwr2.................. 93
add-board-scard ................. 94
add-board-sics.................... 83
add-board-slc ..................... 85
add-board-tslc .................... 87
add-board-tsld.................... 91
add-ctrlnat ....................... 174
add-ctrlport........................ 34
add-ddnconn .................... 148
add-ddnport ..................... 146
add-digitmap.................... 176
add-dlink-span ................. 179
add-exipaddr ...................... 43
add-general-rip................. 168
add-inipaddr....................... 42
add-ipstermid ................... 194
add-isdnbra...................... 119
add-libdata ...................... 151
add-macaddr ...................... 47
add-md5info..................... 155
add-mednat ..................... 172
add-mg ............................. 51
add-mgc ............................ 63
add-mgcapabili ................... 53
add-mgcattr ....................... 67
add-multi-ip ....................... 40
add-multi-mac .................... 45
add-rack ............................ 71
add-rip-cnic...................... 165
add-rip-ctrl ...................... 170
add-shelf ........................... 74
add-slctermid ................... 191
add-snmpcfg ...................... 31
add-subnet ........................ 37
add-tonlab ....................... 228
add-tonlst ........................ 223
add-tonpro....................... 220
261

Confidential and Proprietary Information of ZTE CORPORATION

add-trunkslctermid............ 215
add-v5if .......................... 124
add-v5isdnuser................. 141
add-v5lcci........................ 133
add-v5link ....................... 127
add-v5pch ....................... 130
add-v5pstnuser ................ 137
add-voip-interface ............ 107
add-voip-route ................. 108
ag .................................... 27
as .................................. 111
asasp .............................. 117
asp ................................. 114
attrib .............................. 184
bdstat ............................. 244
block-conf........................ 237
block-dsp ........................ 240
block-ips ......................... 235
block-slc.......................... 232
block-ts........................... 247
board ................................ 77
cardstat........................... 242
check-db ......................... 158
Commands List................... 13
Common User Mode .............. 8
Common Variables .............. 12
conf ................................ 236
config ............................... 18
ctrlnat ............................. 174
ctrlport.............................. 34
ddn................................. 146
debug ............................... 18
Debug Mode....................... 11
del-as ............................. 112
del-asasp......................... 117
del-asp............................ 115
del-board-epc..................... 97
del-board-mics ................... 79
del-board-mpr.................... 81
del-board-mprb .................. 82
del-board-odti .................. 122
del-board-odti-t1 .............. 124
del-board-pwr .................... 89
del-board-pwr2 .................. 93
del-board-scard .................. 95
del-board-sics .................... 84
del-board-slc...................... 86
del-board-tslc..................... 88
del-board-tsld .................... 92

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

del-ctrlnat ........................175
del-ctrlport ........................ 35
del-ddnport ......................147
del-digitmap .....................177
del-dlink-span...................180
del-exipaddr ...................... 44
del-exip-cnic.....................106
del-general-rip ..................169
del-inipaddr ....................... 43
del-ipaddr-ics....................102
del-ipaddr-mpr..................100
del-ipstermid ....................196
del-isdnbra .......................120
del-macaddr ...................... 48
del-md5info ......................156
del-mednat.......................173
del-mgc ............................ 64
del-mgcattr ....................... 70
del-multi-ip ....................... 41
del-multi-mac .................... 46
del-rack ............................ 72
del-rip-cnic .......................167
del-rip-ctrl........................171
del-shelf............................ 75
del-slctermid ....................192
del-snmpcfg ...................... 32
del-subnet......................... 38
del-tonlab ........................229
del-tonlst .........................225
del-tonpro ........................220
del-trunkslctermid .............214
del-v5if ............................125
del-v5isdnuser ..................142
del-v5lcci .........................133
del-v5link .........................128
del-v5pch .........................131
del-v5pstnuser ..................139
del-voip-interface ..............108
del-voip-route ...................109
digitmap ..........................176
disable.............................. 19
dlink ................................179
dsp..................................239
e1attr ..............................144
enable .............................. 19
end .................................. 20
exip.................................105
exipaddr ........................... 43
exit .................................. 20
expar...............................207
fixtonechip .......................219
General Command Syntax ... 11
get-9k52conn ...................179
get-allcfgboard................... 77
get-allmgcattr .................... 69
get-allnat .........................175
get-allqovspar...................154
get-allrackinfo.................... 73
get-allshelfinfo ................... 76
get-allv5Lcci .....................135

262

Confidential and Proprietary Information of ZTE CORPORATION

get-as ............................. 113


get-asasp......................... 118
get-asp............................ 116
get-bdstat-c ..................... 245
get-bdstat-s ..................... 245
get-boardinfo ..................... 78
get-boardipinfo ................... 98
get-boardmacinfo................ 99
get-board-slc...............86, 251
get-cardstat-conf .............. 243
get-cardstat-dsp ............... 244
get-cardstat-ips ................ 242
get-confstatus .................. 236
get-ctrlport ........................ 37
get-dlink .......................... 181
get-dlinkattr ..................... 182
get-dspattrib .................... 190
get-dspstatus ................... 239
get-e1attr ........................ 145
get-expar-mpr .................. 210
get-expar-mprb ................ 212
get-fixtonechip ................. 219
get-globalconst ................... 30
get-hwmap ...................... 252
get-hwset ........................ 252
get-ipaddr.......................... 45
get-ipsattrib ..................... 188
get-ipsstatistic .................. 249
get-ipsstatus .................... 234
get-ipstermid.................... 196
get-ipswildcard ................. 197
get-isdnbra ...................... 121
get-macaddr ...................... 48
get-md5info ..................... 157
get-mgbaseattr................... 59
get-mgc............................. 66
get-mgcapabili.................... 60
get-mgmediatos.................. 62
get-permatone.................. 164
get-rackinfo ....................... 72
get-resourcestat ............... 251
get-ring ........................... 160
get-ringprofile .................. 162
get-rip-cnic ...................... 167
get-rip-ctrl ....................... 171
get-rtppar-miro ................ 207
get-rtppar-mpr ................. 201
get-rtppar-mprb ............... 205
get-shelfboard .................... 90
get-shelfinfo ....................... 75
get-slcattrib ..................... 186
get-slcstatistic .................. 248
get-slcstatus .................... 231
get-slctermid .................... 193
get-slcwildcard ................. 194
get-slnconninfo ................. 250
get-snmpcfg ....................... 34
get-subnet ......................... 39
get-sunitinfo..................... 249
get-system....................... 153

Index

get-tlineinfo ..................... 213


get-tonlab ........................ 230
get-tonlst......................... 227
get-tonpro ....................... 222
get-trunkslcattrib .............. 217
get-trunkslctermid ............ 216
get-tsconninfo .................. 250
get-tsstatus ..................... 246
get-unitinfo ...................... 253
get-v5if ........................... 127
get-v5Lccistatus................ 134
get-v5link ........................ 130
get-v5user ....................... 138
get-voip-ipaddr................. 110
Global Commands ............... 13
globalconst ........................ 29
help .................................. 21
history............................... 22
HyperTerminal ......................2
inipaddr ............................. 42
init-agcmd-cfg .................. 253
Introduction .........................1
ipaddr ............................... 99
ips .................................. 234
ipstermid ......................... 194
isdnbra ............................ 119
isdnuser .......................... 141
load-dftringprof ................ 162
Login Modes .........................1
logout ............................... 23
macaddr .....................47, 103
Management Mode ................8
Management User Configuration
Mode ...............................9
Management User Mode .........9
md5info........................... 155
mednat............................ 172
mg.................................... 51
mgc .................................. 63
mgcattr ............................. 67
mod-9k52conn ................. 177
mod-as............................ 112
mod-asp .......................... 115
mod-ctrlport....................... 36
mod-dlinkattr ................... 181
mod-dspattrib................... 189
mod-e1attr ...................... 144
mod-exip-cnic .................. 105
mod-expar-mpr ................ 207
mod-expar-mprb............... 211
mod-fixtonechip................ 219
mod-globalconst ................. 29
mod-ipaddr-ics ................. 101
mod-ipaddr-mpr ................. 99
mod-ipsattrib ................... 187
mod-macaddr-ics .............. 103
mod-macaddr-mpr ............ 104
mod-md5info.................... 156
mod-mgbaseattr ................. 55
mod-mgc ........................... 65

mod-mgcapabili.................. 56
mod-mgcattr...................... 68
mod-mgip.......................... 61
mod-mgmediatos................ 58
mod-pcmattr.................... 183
mod-permatone................ 163
mod-qovspar.................... 153
mod-ring ......................... 159
mod-ringprofile ................ 160
mod-rtppar-miro............... 206
mod-rtppar-mpr ............... 198
mod-rtppar-mprb.............. 202
mod-slcattrib ................... 184
mod-snmpcfg ..................... 33
mod-subnet ....................... 39
mod-system..................... 152
mod-tlinegroup................. 214
mod-tonlab ...................... 229
mod-tonlst....................... 225
mod-tonpro ..................... 221
mod-trunkuser ................. 218
mod-v5if ......................... 126
mod-v5isdnuser................ 143
mod-v5link ...................... 129
mod-v5pg1 ...................... 132
mod-v5protcl ................... 135
mod-v5pstnuser ............... 140
multi-ip ............................. 40
multi-mac.......................... 45
ndebug ............................. 19
NetNumen N31............. 1, 5, 6
odti ................................ 122
ping.................................. 23
pstnuser .......................... 137
qovspar ........................... 153
rack .................................. 71
ring ................................ 159
rip .................................. 165
rtppar ............................. 198
save ................................. 24
shelf ................................. 74
show................................. 24
slc .................................. 191
sleep................................. 25
snmpcfg ............................ 31
statistic ........................... 248
subnet .............................. 37
Super Mode ....................... 10
system ............................ 152
telnet................................ 17
Telnet ................................. 4
tline................................ 213
tonlab ............................. 228
tonlst .............................. 223
tonpro............................. 220
trunk .............................. 214
ts .................................. 246
unblock-conf .................... 238
unblock-dsp ..................... 241
unblock-ips ...................... 235

Confidential and Proprietary Information of ZTE CORPORATION

263

ZXMSG 5200 (V2.0.2) Multiplex Service Gateway Command Manual (Vol I)

unblock-slc .......................233
unblock-ts ........................247
User Modes ......................... 7
v5 ...................................124

264

Confidential and Proprietary Information of ZTE CORPORATION

voip ................................ 107


who .................................. 26
write ................................. 26

Вам также может понравиться