Академический Документы
Профессиональный Документы
Культура Документы
CONTENTS
1 Note
2 Symbol
3 Machine Introduction
3.1 Function
3.2Appearance
3.3 Opening Package
3.4 Power and Lan Cable
4 Main Components
4.1 Power
4.2 Indicator and Button
4.3 Foil Device
5 Installation of Foil
6 Installation of Driver
6.1 Key-driver Installation
6.2 Pirnter setup
7 Printing
7.1 Ready to Start
7.2 Setup of Print Jobs
7.3 edit and print
8 PreventiveMaintenance
9 Model Parameters
Manual Introduce
We suggest you read the entire contents of this manual to get a
secure and efficient use of the printer, please keep the manual for
Chapter 1 Note
Safety Conditions:
Please note all the warnings and attention to avoid personal
Tips:
1.Only qualified and trained staff to do printer maintenance.
2.The electronic components on the control board of the printer
are very sensitive to electrostatic, easy to damage.
3.The internal voltage of this equipment have a risk of electric
shock.
4.Both hands and clothes should be keep a safety distance from
the moving parts of the model.
5.During the working, operater must not touch the printhead.
6.Properly arrange the power line, avoid tripping danger.
7.If cut off power supply, should hold the power plug, shall not pull
the power cord.
8.If change, should use the same electrical parts in the same
specifications, only use this printer and match the power cable.
9.Do not put and store any items in the printer, meanwhile, and
keep the machine far away from any liquid and pollutants.
10.The equipment can be produced, use, and can launch radio
frequency energy, such as, if not follow the instructions for
installation and operation, may cause harmful interference, for
residential use, the user must remove interference at one's own
expenses
Chapter 2 Symbols
ON Turn on the power, the power is connected
Product Label
This label shows the specs of this model, located at the behind of
the machine.
3.2 Appearance
Notice:
Package size: 69X63X49cm
It should be placed on the plate that at least withstand 2 times
of the weight of the machine.
Do not touch the head directly with hands.
Please keep well of packing materials for furture use.
machine, it can meet the demand of the machine. If using the foil
without approval, it can cause damage to the machine, it is with no
warranty, and the cost will be provided to repair the machine.
1. Key-driver Installation
"
Click "Next"
Click "Finish"
Chapter 7 Printing
7.1 Ready to start
Before operating the machine, please check all of following
items completed:
The machine has already connected with computer.
The foil was ready.
Printer & computer are in power.
The medium has already put on the working table.
Keep the machine away from the surrounding objects, prevent to
meet obstacles when working table is moving and damage the
machine.
1. Edit in coreldraw
Open coreldraw, set the page size "57*150mm". Input your image
and text in the coreldraw, after finished the editing, click pirnt, and
then pop up a frame like following:
Choose the printer 3050A, then click properties, and pop up the
following....frame:
The page size choose 2.24x6 inch, then click ok, ok, then reback
the following frame,
Click "apply", and "print", then will pop up the foil control center,
like following picuter:
Then click the modify job, setting the printhead force is "15-25"
(this means the printhead pressure when printing, if this parameter
too big, mabe it will damage the printerhead). The cold dot energy
is "13-25" (this means the printhead tempreture when printing, if
this parameter is too big, maybe it will cut the foil) . The edge
energy is 0, the pirnthead warmup is 0, the speed down is 0. Keep
all the other parameter default.
Then save job, yes, yes, and you can click the "print" in the foil
control center. The machine began to work, and print out the file.
2. Edit in word:
Open word, set the page size "5.7*15cm".
page margins set 0, orientation choose the "Landscape", as
following picture:
Then click ok, Input the Images and texts what you want, as the
following picture:
Please click print when you finished your input. The following
platform.
Chapter 8 PreventiveMaintenance
The printhead is a precise and sensitive electronics device. As
it may early damaged by hardware or static.So in the work
situation, for lowing down the risk and adding the service life of it,
please keep enough humidy.
The surface of printhead is made up of a kind of thin hardness
of high silica protective film,but it may also be broken by
hardwre.So please operate it as below:
1. Do not directly touch the hot area of the printhead.
2. To keep the level of print media, without hard partcles and
droplet.
3. Do not touch the surface of the printhead with metalware.
4. To keep the workplace clean and tidy as far as possible.
5. If can guarantee the printing quality, try to minimize print
pressure as possible as you can.
69X63X49cm
Resolution
300dpi
Printing size
15CM*5.7CM
Software Compatibility
Apply to most of the WINDOWS applications
Input port \output port
Power supply
Network