Академический Документы
Профессиональный Документы
Культура Документы
Correct
2.
Oracle Enterprise Manager Ops Center provide physical a
nd virtual systems management for Oracle's SPARC and x86 servers.
Mark for
Review
(1) Points
True (*)
False
Correct
3.
A banking customer is looking to deploy a new Java-base
d web application. In general, which server should you recommend for this type o
f workload?
Mark for Review
(1) Points
Netra servers (e.g., Sun Netra T5440)
T-Series servers (e.g., T3-1) (*)
M-Series servers (e.g., M4000)
V-Series servers (e.g., V240)
4.
Oracle Enterprise Linux is supported on x86, x86-64, an
d SPARC64 architectures.
Mark for Review
(1) Points
True
False (*)
Correct
5.
Which product line is designed for customers who want o
r need to minimize server management, and datacenter space, power, and cooling,
without giving up performance? Mark for Review
(1) Points
x86 rack-mount servers
M-Series servers
T-Series servers
Blade servers (*)
Correct
7.
How many rack units (RUs) does the M4000 server utilize
?
Mark for Review
(1) Points
8 RU
6 RU (*)
10 RU
12 RU
Correct
8.
How many cores does each SPARC64 VI CPU have? Mark for
Review
(1) Points
Six
Two (*)
Four
One
vers support?
(1) Points
9.
What type of CPUs do the Sun SPARC Enterprise MX000 ser
Mark for Review
UltraSPARC T1
UltraSPARC III/IV
UltraSPARC I/II
SPARC64 VI/VII (*)
Correct
10.
What are the maximum number of high-density disk drives
that can reside in a high-end server's IOU?
Mark for Review
(1) Points
Eight
Two
Six
Four (*)
Correct
11.
What is the purpose of the system controller (SC) in the MX000 servers?
Mark for Review
(1) Points
It provides console to the domains.
It is an ASIC that provides an interface between the MACs, the CPUs, and
the I/O controllers. (*)
It monitors power to the system.
It allows you to configure domains.
Correct
13.
What are the maximum number of memory boards (MEMBs) th
at a M5000 server supports?
Mark for Review
(1) Points
Eight (*)
Two
Four
Six
Correct
14.
processor (XSCFU)?
(1) Points
Correct
15.
n a M8000 server?
(1) Points
Sixteen
Eight
Four (*)
Twelve
Correct
16.
How many domains can you configure in a fully loaded M8000 server?
Mark for Review
(1) Points
Twenty-four
Eight
Sixteen (*)
Four
Correct
17.
Mark for
Review
(1) Points
CPU and I/O
CPU and memory
Memory and I/O
CPU, Memory, and I/O (*)
Correct
18.
What type of PCI cards do the M4000 and M5000 servers s
upport? Mark for Review
(1) Points
PCI-E
PCI-X
Both PCI-E and PCI-X (*)
Correct
19.
Mark for
Review
(1) Points
CPUs and memory reside on the same board in the mid-range servers.
CPUs and memory reside on different boards in the high-end servers.
CPUs and memory reside on different boards in the mid-range servers. (*)
None of the above.
Correct
20.
What type of interconnect is used in the MX000 server l
ine?
Mark for Review
(1) Points
Infiniband
UPA
Jupiter (*)
Sun Fire
Correct
21.
Which of the following is not a security function of the XSCF? Mark for
Review
(1) Points
User privilege management
Access management by filtering
Log management
Firewall (*)
Correct
22.
M3000 server occupy?
(1) Points
How many rack units (RUs) does the Sun SPARC Enterprise
Mark for Review
8 RU
6 RU
2 RU (*)
4 RU
Correct
on the XSCF?
(1) Points
23.
Which of the following user interfaces is not available
Mark for Review
Correct
er supply?
(1) Points
24.
What command needs to be executed before removing a pow
Mark for Review
<tt>replacefru</tt> (*)
<tt>poweroff</tt>
<tt>showhardconf</tt>
<tt>removefru</tt>
Correct
25.
se M3000 Server?
(1) Points
Bottom to top
Top to bottom
Back to front
Front to back (*)
Correct
26.
What is the purpose of the Predictive Failure Analysis?
Review
(1) Points
Mark for
Correct
27.
Mark for Review
(1) Points
Correct
29.
Mark for Review
(1) Points
Two (*)
Four
One
Three
Correct
30.
Which of the following is not a method for downloading
the firmware using the <tt>getflashimage<//> command? Mark for Review
(1) Points
ftp
USB memory stick
ssh (*)
http
Correct
31.
Which of the following components is not a FRU?
(1) Points
CPU (*)
Fan
Power supply
DVD drive
Correct
32.
Which of the following is not one of the statuses to th
e <tt>showhardconf</tt> command output? Mark for Review
(1) Points
Deconfigured
Crunched (*)
Degraded
Faulted
Correct
33.
Mark for
Review
(1) Points
The fan tray modules are hot-replaceable
The fan tray modules are redundant
The fan tray modules are neither redundant nor hot-replaceable
The fan tray modules are redundant and hot-replaceable (*)
Correct
34.
Where does the system power LED reside on the Sun SPARC
Enterprise M3000 server?
Mark for Review
(1) Points
The rack that it is installed in
The back of the server
The top of the server
The operator panel (*)
Correct
35.
e hard disk drives?
(1) Points
Correct
36.
What symbol is placed beside a failed or degraded component in the <tt>
showhardconf</tt> and <tt>showstatus</tt> command output?
Mark for Review
(1) Points
* (*)
+
^
Correct
ator panel?
(1) Points
37.
Which of the following LEDs does not reside on the oper
Mark for Review
Correct
38.
How many USB ports does the Sun Fire X4540 server have?
Correct
40.
Mark for
Review
(1) Points
Four - Groups 1, 2, 3, and 4
Two - Groups A and B (*)
Four - Groups A, B, C and D
Two - Groups 1 and 2
Correct
43.
Which command do you use to update firmware on the serv
ice processor? Mark for Review
(1) Points
<tt>obpupdate</tt>
<tt>load</tt>
<tt>flashupdate</tt> (*)
<tt>firmwareupdate</tt>
Correct
44.
What is the maximum internal storage configuration for
the Sun SPARC Enterprise M3000 server? Mark for Review
(1) Points
Two 146GB hard drives
Correct
Mark for
Review
(1) Points
<tt>sethostname xscf#0 <hostname></tt> (*)
<tt>hostname xscf#0</tt>
<tt>sethostname <hostname></tt>
<tt>hostname</tt>
Correct
46.
What does the DSCP network connect?
(1) Points
Correct
47.
What are the maximum number of routes that can be confi
gured for each network interface on the XSCF? Mark for Review
(1) Points
One
Four
Eight (*)
Two
Correct
49.
What type of PCI cards do the M4000 and M5000 servers s
upport? Mark for Review
(1) Points
Both PCI-E and PCI-X (*)
PCI-E
PCI-X
None of the above
Correct
50.
stem board (XSB)?
(1) Points
Correct
51.
What is the purpose of the system controller in the MX000 servers?
Mark for Review
(1) Points
It monitors power to the system.
It allows you to configure domains.
It provides console to the domains.
It is an ASIC that provides an interface between the MACs, the CPUs, and
the I/O controllers. (*)
Correct
53.
What is the possible range of timeout values in minutes
for the <tt>setautologout</tt> command?
Mark for Review
(1) Points
1
60
0-255
0 - 60 (*)
0-255
Correct
55.
Which command assigns platadm privileges to the user sa
m?
Mark for Review
(1) Points
<tt>setprivileges platadm sam</tt>
<tt>setprivileges sam platadm</tt> (*)
Correct
56.
What is the initial login account on the service processor?
Review
(1) Points
Mark for
root
default (*)
admin
platadm
Correct
57.
Mark for
Review
(1) Points
Enables or disables the use of LDAP (*)
Displays the LDAP configuration for the service processor
Configures the service processor as an LDAP client
Configures the service processor as an LDAP server
Correct
58.
Prior to performing an <tt>addboard</tt> command what m
ust the board be assigned to? Mark for Review
(1) Points
The domain's DCL (*)
None of the above
Correct
nterfaces?
(1) Points
59.
Which command do you execute to view the XSCF network i
Mark for Review
<tt>showtelnet</tt>
<tt>shownetwork</tt> (*)
<tt>showroute</tt>
<tt>shownet</tt>
Correct
60.
Which of the following capabilities does a user created
with useradm privileges not have?
Mark for Review
(1) Points
Assign domain hardware (*)
Change a user's privileges
Change a user's password
Create user accounts
<tt>setsnmpvacm</tt>
<tt>setsnmpusm</tt>
All of the above
(1) Points
Configures a NTP server for use on the XSCF
None of the above
Configures an email server for use on the domains
Configures an email server for use on the XSCF (*)
Correct
63.
Which conditions prevent you from detaching a system bo
ard?
Mark for Review
(1) Points
A process is bound to a CPU on the board that you are removing.
All of the above. (*)
A processor being removed is the last in its processor set.
There are real-time processes running and you are trying to remove a boa
rd with permanent memory.
Correct
64.
What does the <tt>reserve</tt> option mean on the <tt>d
eleteboard</tt> command?
Mark for Review
(1) Points
Disconnects the board but keeps it assigned to the domain
Reserves detachment of the board until the next power cycle (*)
Completely disconnects the board from the domain
Pre-tests the DR detach before completing it
Correct
is it placed?
(1) Points
65.
When a system board is unassigned from a domain, where
Mark for Review
Correct
66.
Which of the following is not a function of the service processor (XSCF
U)?
Mark for Review
(1) Points
Acts as an OS installation server for the domains (*)
Provides system console
Configures and monitors the platform
Manages Capacity on Demand
Correct
67.
Mark for
Review
(1) Points
<tt>break -d 0</tt>
<tt>sendbrk -d 0</tt>
<tt>Stop-A</tt>
<tt>sendbreak -d 0</tt> (*)
Correct
tenance?
(1) Points
68.
What XSCF function uses email reporting for remote main
Mark for Review
Correct
nal network?
(1) Points
69.
Which command would you use to configure the XSCF exter
Mark for Review
<tt>setdscp</tt>
<tt>smsconfig</tt>
<tt>setupnetwork</tt>
<tt>setnetwork</tt> (*)
Correct
70.
Mark for
Review
(1) Points
CPU and memory
CPU and I/O
Memory and I/O
CPU, memory, and I/O (*)
Correct
71.
Which of the following is NOT one of the options for the <tt>setpasswor
dpolicy</tt> command? Mark for Review
(1) Points
<tt>minlen</tt>
<tt>inactive</tt>
<tt>maxdays</tt>
<tt>maxlen</tt> (*)
Correct
72.
Review
(1) Points
None of the above.
The XSCFU only allows a serial connection.
The XSCFU allows both a serial and an ethernet connection. (*)
Mark for
Correct
73.
service processor?
(1) Points
<tt>user create</tt>
<tt>adduser</tt> (*)
<tt>useradd</tt>
<tt>showuser</tt>
Correct
74.
Mark for
Review
(1) Points
Domain control list
None of the above
Domain configuration list
Domain component list (*)
Correct
75.
-XSB and vice-versa?
(1) Points
<tt>setfru</tt>
<tt>setupfru</tt> (*)
<tt>setupxsb</tt>
<tt>setxsb</tt>
Correct
77.
Which command allows you to set the omit-memory option
for use in DR operations?
Mark for Review
(1) Points
<tt>addboard</tt>
<tt>setmemory</tt>
<tt>omit-mem</tt>
<tt>setdcl</tt> (*)
Correct
78.
Which command would you run to delete XSB 01-0 from dom
ain 3? Mark for Review
(1) Points
<tt>deleteboard -d 3 -c unassign 01-0</tt>
(1) Points
Dynamic reconfiguration
Fault management
NTP
All of the above
81.
in?
Mark for Review
(1) Points
Assigned
Running
Available (*)
Unknown
Correct
82.
Correct
000 servers?
(1) Points
84.
What does the <tt>cfgadm</tt> allow you to do in the MX
Mark for Review
Correct
87.
Mark for
Review
(1) Points
. The Centerplane (*)
. The Backplane
. The power distribution unit
. Each other
Correct
88.
Which component feature is in the PCI-X I/O Boat but NO
T in the PCIe I/O Boat? Mark for Review
(1) Points
. Six PCI-X I/O adapter slots (*)
. Link card slot
. Overtemperature indicator
. Six PCIe I/O adapter slots
Correct
89.
What is the maximum allowed distance between the host a
nd the Sun External I/O Expansion Unit? Mark for Review
(1) Points
. 10 meters
. 15 meters
. 1 meter
. 5 meters (*)
Correct
90.
What combination of Sun External I/O Expansion Unit cha
ssis LEDs indicates that the chassis has powered on OK? Mark for Review
(1) Points
Power LED on, Fault LED off, Locator LED off, and Overtemperature on
Power LED on, Fault LED off, Locator LED off, and Overtemperature off (*
)
Power LED on, Fault LED on, Locator LED off, and Overtemperature on
Power LED on, Fault LED on, Locator LED off, and Overtemperature off
Correct
91.
Where is PSU0 located in the Sun External I/O Expansion Unit? Mark for
Review
(1) Points
. Back side, left slot
Front side, left slot
. Front side, right slot (*)
. Back side, right slot
e sun4u platform?
(1) Points
. SUNWpci.u
. SUNWiris.u
. SUNWcakr.u (*)
. SUNWsams.u
Where can you find error messages about the Sun Externa
Mark for Review
. /share/adm/log (*)
. /dev/adm/log
. /var/adm/messages
. /etc/adm/log
Correct
96.
If the attention LED on an I/O adapter is on what does that indicate?
Mark for Review
(1) Points
. Card failure (*)
. Normal operation
. Card port failure
. Link cable failure
Mark for
. I/O adapter
Correct
98.
What information CANNOT be displayed by the ioxadm util
ity?
Mark for Review
(1) Points
. ioxadm session logins (*)
. Fan sensor data
. LED status
. Temperature sensor data
Correct
99.
Correct
101.
What is a Smart Adjust hot pluggable carrier used for? Mark for Review
(1) Points
. The carrier for the Sun External I/O Expansion Unit chassis
. The carrier for the I/O adapters and link card (*)
. The carrier for the I/O Boat
. The carrier for the power supplies
Correct
ESD Prevention
(Answer all questions in this section)
103.
Low humidity environments reduce the voltage generated
from friction and moving,
Mark for Review
(1) Points
True
False (*)
Correct
105.
Mark for
Review
(1) Points
True (*)
False
106.
Which of the following is NOT one of the rules for preventing ESD damag
e?
Mark for Review
(1) Points
Store and transport ESD-sensitive items in static-shielding containers
Correct
d failure?
(1) Points
107.
What is the difference between a soft failure and a har
Mark for Review
Correct
108.
109.
Mark for
Review
(1) Points
Work surfaces
Clothing
People
All of the above
Correct
112.
The EIS Methodology is a set of standards, processes, t
ools, and documentation that helps an installation team perform installations of
Sun equipment in a consistent manner and provides them with a set of installati
on best practices for perfoming what particular installations? Mark for Review
(1) Points
Currently concentraing on Solaris for SPARC platform, Solaris for x86 pl
atform servers, and Sun storage (*)
Currently concentrating on Solaris for Sun storage only
Currently concentratin on Solaris for Solaris for x86 platform servers o
nly.
Currently concentrating on Solaris for SPARC platfor only
Correct
113.
EIS technical installation checklists are available for
:
Mark for Review
(1) Points
Servers, Workstations, Software items
Workstations, Servers, Storage
Servers, Storage, Software items (*)
Servers, Storage, Appliances
False
Correct
116.
True or False? The EIS DVD contains optional up-to-date patches and uti
lities sometimes needed during the installatoin procedure.
Mark for Review
(1) Points
True
False (*)
Correct
117.
(1) Points
A clean data center environment must be maintained: systems should be un
packed outside of the data center, and then moved into the center.
All server installations are to be properly grounded according to the me
thods described in the appropriate Sun hardware documentation. (*)
A system should not experience a maximum positive or negative temperatur
e gradient of more than 2 degrees Celsiuls or 4 degrees Farenheit per hour.
Processes are in place to ensure that equipment is not damaged due to im
proper handling or climage changes between transportation and the final destinat
ion.
Correct
118.
How do you identify a system that has been installed us
ing EIS? (Select all that apply)
Mark for Review
(1) Points
(Choose all correct answers)
The system boots without error.
the file /var/sun/EIS-CD.log is populated when running the setup-standar
d script and the patch installation scripts. (*)
The EIS-DVD ejects from the DVD reader.
The results from Griffon should be clean. (*)
(1) Points
Patches and SunSolve information
Information, links, downloads, detailed training, and success stories (*
)
Sun System Handbook links and links to heep://docs.sun.com
All of the above
Correct
121.
Planning is a very important phase of a successful installation and hel
ps determine, and confirm, the deliverables with the customer. What tool is used
for this type of work? Mark for Review
(1) Points
WINGS (*)
CapacityTOOL
EISplan
INSTALLplan
(1) Points
Includes patches for Sun software required in most installations
Includes scripts to carry out standard settings and to unpack and instal
l the patches
Includes programs and tools, such as explorer and Griffon
Enables the systems to be installed consistently and without need for in
ternet connectivity
All of the above (*)
Correct
123.
True or False? The acclimatization standard helps insta
ller successfully introduce new Sun servers and storage to a customer's data cen
ter.
Mark for Review
(1) Points
True (*)
False
126.
Where are the major changes between EIS-DVD revisions found? (Select al
l that apply() Mark for Review
(1) Points
(Choose all correct answers)
On the EIS web site (*)
In the history .txt file on the DVD (*)
Correct
128.
True or False? EIS is an optional service for installat
ions carried out by Sun staff and their installation partners. Mark for Review
(1) Points
True
False (*)
True (*)
False
Correct
1.
Which product line has extreme single-threaded performance and industry
-leading reliability and availability. Mark for Review
(1) Points
x86 rack-mount servers
M-Series servers (*)
T-Series servers
Blade servers
Correct
2.
What certification means the product meets specific spe
cifications for vibration resistance, fire suppression, and RF emissions?
Mark for Review
(1) Points
NEBS Level 3 (*)
Evaluation Assurance Level (EAL) 4+
Telco Common Criteria
Energy Star
Correct
3.
A banking customer is looking to deploy a new Java-base
d web application. In general, which server should you recommend for this type o
f workload?
Mark for Review
(1) Points
Netra servers (e.g., Sun Netra T5440)
V-Series servers (e.g., V240)
T-Series servers (e.g., T3-1) (*)
M-Series servers (e.g., M4000)
Correct
4.
Oracle Enterprise Linux is supported on x86, x86-64, an
d SPARC64 architectures.
Mark for Review
(1) Points
True
False (*)
Correct
5.
Which product line is designed for customers who want o
r need to minimize server management, and datacenter space, power, and cooling,
without giving up performance? Mark for Review
(1) Points
x86 rack-mount servers
Blade servers (*)
T-Series servers
M-Series servers
Correct
6.
What type of PCI cards do the M4000 and M5000 servers support? Mark for
Review
(1) Points
PCI-E
PCI-X
Both PCI-E and PCI-X (*)
None of the above
Correct
7.
n a M9000-64 server?
(1) Points
Eight
Four
Twenty-four
Sixteen (*)
Correct
8.
processor (XSCFU)?
(1) Points
Correct
9.
e MX000 servers?
(1) Points
It is an ASIC that provides an interface between the MACs, the CPUs, and
the I/O controllers. (*)
It provides console to the domains.
It allows you to configure domains.
It monitors power to the system.
Correct
10.
How many cores does each SPARC64 VI CPU have? Mark for
Review
(1) Points
Six
Two (*)
One
Four
Correct
11.
What type of PCI cards do the M8000 and M9000 servers support? Mark for
Review
(1) Points
PCI-E (*)
PCI-X
Correct
13.
What type of interconnect is used in the MX000 server l
ine?
Mark for Review
(1) Points
Infiniband
Sun Fire
Jupiter (*)
UPA
Correct
14.
stem board (XSB)?
(1) Points
Correct
15.
Mark for
Review
(1) Points
CPUs and memory reside on the same board in the mid-range servers.
None of the above.
CPUs and memory reside on different boards in the high-end servers.
CPUs and memory reside on different boards in the mid-range servers. (*)
Correct
16.
What are the maximum number of memory boards (MEMBs) that a M5000 serve
r supports?
Mark for Review
(1) Points
Two
Six
Eight (*)
Four
Correct
000 server?
(1) Points
17.
How many domains can you configure in a fully loaded M8
Mark for Review
Sixteen (*)
Twenty-four
Eight
Four
Correct
18.
Mark for
Review
(1) Points
Memory and I/O
CPU and I/O
CPU and memory
CPU, Memory, and I/O (*)
Correct
19.
se MX000 server line?
(1) Points
Five (*)
Two
Eight
Four
Correct
vers support?
20.
What type of CPUs do the Sun SPARC Enterprise MX000 ser
Mark for Review
(1) Points
UltraSPARC T1
UltraSPARC I/II
UltraSPARC III/IV
SPARC64 VI/VII (*)
Correct
21.
Which of the following is not a method for downloading the firmware usi
ng the <tt>getflashimage<//> command? Mark for Review
(1) Points
ssh (*)
USB memory stick
http
ftp
Correct
22.
for the domain?
(1) Points
Two
Four (*)
Six
Eight
Correct
23.
Correct
24.
e hard disk drives?
(1) Points
Correct
25.
Which of the following servers does the behavior of the
M3000 server most resemble?
Mark for Review
(1) Points
Sun SPARC Enterprise T2000 server
Sun Fire E25K
Sun Fire Mid-range servers
Sun SPARC Enterprise MX000 servers (*)
Correct
26.
Which of the following components can be replaced while the system is p
owered up?
Mark for Review
(1) Points
DVD drive
HDD backplane
Memory DIMM
HDD (*)
Correct
ator panel?
(1) Points
27.
Which of the following LEDs does not reside on the oper
Mark for Review
Correct
er supply?
(1) Points
28.
What command needs to be executed before removing a pow
Mark for Review
<tt>replacefru</tt> (*)
<tt>poweroff</tt>
<tt>showhardconf</tt>
<tt>removefru</tt>
Correct
29.
What is the maximum internal storage configuration for
the Sun SPARC Enterprise M3000 server? Mark for Review
(1) Points
Two 146GB hard drives
One 146GB hard drive
Four 146GB hard drives (*)
Three 146GB hard drives
Correct
ach FRU?
(1) Points
30.
Which command do you run to display information about e
Mark for Review
<tt>showhardconf</tt> (*)
<tt>fmdump</tt>
<tt>showstatus</tt>
<tt>showlogs</tt>
Correct
31.
What are the supported DIMM sizes?
(1) Points
1GB, 2GB, 8GB
512MB, 1GB, 2GB
1GB, 2GB, 4GB (*)
256MB, 512MB, 1GB
Correct
32.
How many USB ports does the Sun Fire X4540 server have?
Correct
33.
M3000 server occupy?
(1) Points
How many rack units (RUs) does the Sun SPARC Enterprise
Mark for Review
8 RU
2 RU (*)
6 RU
4 RU
Correct
34.
Mark for Review
(1) Points
Two (*)
One
Four
Three
Correct
35.
Correct
36.
Which direction does air flow in the Sun SPARC Enterprise M3000 Server?
Mark for Review
(1) Points
Front to back (*)
Back to front
Bottom to top
Top to bottom
Correct
37.
Where does the system power LED reside on the Sun SPARC
Enterprise M3000 server?
Mark for Review
(1) Points
The operator panel (*)
The back of the server
Correct
38.
Which of the following is a supported Sun SPARC Enterpr
ise M3000 server configuration? Mark for Review
(1) Points
Two SPARC64 VII quad-core processors
Two SPARC64 VII dual-core processors
One SPARC64 VII dual-core processor (*)
Four SPARC64 VII quad-core processors
Correct
39.
What symbol is placed beside a failed or degraded compo
nent in the <tt>showhardconf</tt> and <tt>showstatus</tt> command output?
Mark for Review
(1) Points
^
* (*)
+
Correct
40.
g the power supplies?
(1) Points
Correct
41.
How can you connect to the XSCF service processor?
(1) Points
Correct
42.
What is the default command prompt on the service proce
ssor? Mark for Review
(1) Points
XSCF> (*)
sp>
>
sc>
Correct
43.
What is the average weight of a fully loaded Sun SPARC
Enterprise M3000 server?
Mark for Review
(1) Points
125 pounds
50 pounds (*)
75 pounds
150 pounds
Correct
44.
Fire X4540 server?
(1) Points
(1) Points
Domain to domain
Domain to public network
Service processor to service processor
Domain to service processor (*)
Correct
46.
What are the maximum number of routes that can be configured for each n
etwork interface on the XSCF? Mark for Review
(1) Points
Two
Four
One
Eight (*)
Correct
nal network?
(1) Points
47.
Which command would you use to configure the XSCF exter
Mark for Review
<tt>setnetwork</tt> (*)
<tt>smsconfig</tt>
<tt>setdscp</tt>
<tt>setupnetwork</tt>
Correct
48.
Review
(1) Points
<tt>Stop-A</tt>
<tt>break -d 0</tt>
<tt>sendbrk -d 0</tt>
<tt>sendbreak -d 0</tt> (*)
Mark for
Correct
49.
(1) Points
Dynamic reconfiguration
Fault management
NTP
All of the above
Available (*)
Running
Unknown
Assigned
Correct
51.
Which of the following is a true statement?
(1) Points
Correct
52.
Mark for
Review
(1) Points
<tt>deleteuser</tt> (*)
<tt>user remove</tt>
<tt>removeuser</tt>
<tt>userdel</tt>
Correct
53.
Which command would you use to enable <tt>telnet</tt> o
n the service processor?
Mark for Review
(1) Points
<tt>settelnet enable</tt>
<tt>settelnet -c enable</tt> (*)
<tt>enable telnet</tt>
<tt>settelnet on</tt>
Correct
54.
Which command assigns platadm privileges to the user sa
m?
Mark for Review
(1) Points
<tt>setprivileges platadm sam</tt>
<tt>setprivileges sam platadm</tt> (*)
Correct
55.
Which of the following commands is used to configure SN
MP on the service processor?
Mark for Review
(1) Points
<tt>setsnmp</tt>
<tt>setsnmpvacm</tt>
<tt>setsnmpusm</tt>
All of the above
Correct
57.
-XSB and vice-versa?
(1) Points
<tt>setupxsb</tt>
<tt>setupfru</tt> (*)
<tt>setfru</tt>
<tt>setxsb</tt>
Correct
58.
Mark for
Review
(1) Points
<tt>sethostname <hostname></tt>
<tt>hostname xscf#0</tt>
<tt>sethostname xscf#0 <hostname></tt> (*)
<tt>hostname</tt>
Correct
59.
Mark for
Review
(1) Points
CPU, memory, and I/O (*)
Memory and I/O
CPU and I/O
CPU and memory
Correct
60.
Correct
61.
Prior to performing an <tt>addboard</tt> command what must the board be
assigned to? Mark for Review
(1) Points
The domain's ACL
None of the above
The domain's DCL (*)
Another domain's DCL
Correct
62.
What does the <tt>reserve</tt> option mean on the <tt>d
eleteboard</tt> command?
Mark for Review
(1) Points
Disconnects the board but keeps it assigned to the domain
Reserves detachment of the board until the next power cycle (*)
Pre-tests the DR detach before completing it
Completely disconnects the board from the domain
Correct
63.
(1) Points
Correct
64.
Mark for
Review
(1) Points
Configures the service processor as an LDAP server
Enables or disables the use of LDAP (*)
Configures the service processor as an LDAP client
Displays the LDAP configuration for the service processor
Correct
65.
processor (XSCFU)?
(1) Points
Correct
66.
What does the <tt>disableuser</tt> command do? Mark for Review
(1) Points
Correct
r panel?
(1) Points
67.
What are the physical keyswitch settings on the operato
Mark for Review
On and off
On, locked, and service
On, off, and service
Locked and service (*)
Correct
is it placed?
(1) Points
68.
When a system board is unassigned from a domain, where
Mark for Review
Correct
69.
0-255
0-255
1
60
0 - 60 (*)
Correct
70.
Correct
71.
What is the default escape key sequence from a domain's console?
Mark for Review
(1) Points
<tt>#.</tt> (*)
<tt>~.</tt>
<tt>[ESC]</tt>
<tt>~#</tt>
Correct
72.
service processor?
(1) Points
<tt>showuser</tt>
<tt>user create</tt>
<tt>adduser</tt> (*)
<tt>useradd</tt>
Correct
73.
Which of the following commands is NOT used to manage D
NS on the service processor?
Mark for Review
(1) Points
<tt>setnameserver</tt>
<tt>shownameserver</tt>
<tt>setdns</tt> (*)
<tt>sethostanme</tt>
nterfaces?
(1) Points
74.
Which command do you execute to view the XSCF network i
Mark for Review
<tt>shownetwork</tt> (*)
<tt>showroute</tt>
<tt>shownet</tt>
<tt>showtelnet</tt>
Correct
000 servers?
(1) Points
75.
What does the <tt>cfgadm</tt> allow you to do in the MX
Mark for Review
Correct
76.
What are the maximum number of DNS servers that can be registered for t
he service processor? Mark for Review
(1) Points
Two
One
Four
Three (*)
Correct
78.
can they perform?
(1) Points
re running?
(1) Points
79.
Which command shows you which version of firmware you a
Mark for Review
<tt>version</tt> (*)
<tt>uname -a</tt>
<tt>showfirmware</tt>
<tt>showversion</tt>
Correct
80.
Which of the following functions does the <tt>addboard<
/tt> command NOT perform?
Mark for Review
(1) Points
Configure the board with the Solaris OS
Modify the DCL (*)
Correct
81.
Which is the correct classification for the motherboard in the M4000 an
d M5000 servers?
Mark for Review
(1) Points
All of the above
Cold replacement (*)
Active replacement
Hot replacement
Correct
82.
What command do you execute to power on all of the comp
letely set up domains ? Mark for Review
(1) Points
<tt>poweron all</tt>
<tt>poweronall</tt>
<tt>poweron -a</tt> (*)
<tt>power -on -all</tt>
Correct
83.
Review
(1) Points
Domain configuration list
Mark for
Correct
84.
Which of the following capabilities does a user created
with useradm privileges not have?
Mark for Review
(1) Points
Assign domain hardware (*)
Change a user's password
Create user accounts
Change a user's privileges
Correct
Correct
86.
At revenue release of the Sun External I/O Expansion Unit what hosts wi
ll be supported?
Mark for Review
(1) Points
. Sun SPARC Enterprise M4000, M5000, M8000, and M9000 (*)
. Sun Fire T1000 and Sun Fire T2000 servers
. Sun Fire X4100 and Sun Fire X4200 servers
Netra T2000 Server
Correct
87.
Which of the commands can be executed from OpenBoot PRO
M (OBP) to view the Sun External I/O Expansion Unit device paths?
Mark for
Review
(1) Points
. pwd
. show-devs (*)
. ls
. cfgadm
Correct
88.
Correct
89.
both link cards mean?
(1) Points
Correct
91.
Which component feature is in the PCI-X I/O Boat but NOT in the PCIe I/
O Boat? Mark for Review
(1) Points
. Link card slot
. Six PCI-X I/O adapter slots (*)
. Overtemperature indicator
Correct
92.
When the carrier is removed from the boat how do you un
lock the carrier handle?
Mark for Review
(1) Points
. Push on the carrier handle tab on the front of the carrier.
. Push on the carrier handle tab on the bottom of the carrier. (*)
. Pull back on the carrier handle.
. Push on the carrier handle tab on the top of the carrier.
Correct
94.
Mark for Review
(1) Points
Correct
95.
Why must the carrier handle be in the closed position i
n order to install the link card in slot 0?
Mark for Review
(1) Points
. To make it easier to hold the handle while sliding the carrier into th
e slot
. To better align the card within the carrier
. To make sure the card is turned off
. To allow for a clearance between the card and slot connectors (*)
96.
Which step is not needed to replace an I/O Boat?
(1) Points
97.
Mark for
Review
(1) Points
. Each other
. The Backplane
. The power distribution unit
. The Centerplane (*)
Correct
98.
adapters be found?
(1) Points
. http://sunsolve.sun.com
. http://sun.com
. Vendor's web site (*)
. No updates are needed
Correct
99.
Which fault management utility can be used to display S
un External I/O Expansion Unit error messages? Mark for Review
(1) Points
. log
. dumplog
. fmdump (*)
. ioxadm
. SUNWpci.u
. SUNWsams.u
. SUNWiris.u
. SUNWcakr.u (*)
Correct
101.
The link cards use which type of protocol for the data path?
Review
(1) Points
Mark for
. Fibre Channel
. USB
. PCIe (*)
. PCI
. Four
Correct
ESD Prevention
(Answer all questions in this section)
103.
Low humidity environments reduce the voltage generated
from friction and moving,
Mark for Review
(1) Points
True
False (*)
Correct
d failure?
(1) Points
104.
What is the difference between a soft failure and a har
Mark for Review
Correct
105.
enting ESD damage?
(1) Points
Correct
106.
Standing up can generate up to 1,400 volts.
(1) Points
True (*)
False
Correct
107.
Why are ESD "soft failures" the most serious type of fa
ilures? Mark for Review
(1) Points
The damage is immediate and easily detected
The damage is not immediately noticed or detected (*)
They represent 60% of failures
They represent 40% of all failures
Correct
108.
Correct
109.
Correct
110.
Mark for
Review
(1) Points
Work surfaces
Clothing
People
All of the above
Twice a month
Once a quarter
Correct
112.
True or False? EIS is an optional service for installat
ions carried out by Sun staff and their installation partners. Mark for Review
(1) Points
True
False (*)
Correct
113.
The EIS Methodology is a set of standards, processes, t
ools, and documentation that helps an installation team perform installations of
Sun equipment in a consistent manner and provides them with a set of installati
on best practices for perfoming what particular installations? Mark for Review
(1) Points
Currently concentrating on Solaris for Sun storage only
Currently concentratin on Solaris for Solaris for x86 platform servers o
nly.
Currently concentrating on Solaris for SPARC platfor only
Currently concentraing on Solaris for SPARC platform, Solaris for x86 pl
atform servers, and Sun storage (*)
Correct
114.
(1) Points
Defines a method for achieving a consistent installation for Sun Systems
.
Mandates that installers use the EIS-DVD during the installation process
.
All of the above. (*)
Requires the installer to use the appropriate EIS installation checklist
s when installing Solaris
Correct
115.
EIS technical installation checklists are available for
:
Mark for Review
(1) Points
Servers, Storage, Software items (*)
Servers, Storage, Appliances
Workstations, Servers, Storage
Servers, Workstations, Software items
Correct
116.
EIS-DVD: (Select all that apply)
(1) Points
Correct
117.
(1) Points
Patches and SunSolve information
Information, links, downloads, detailed training, and success stories (*
)
Sun System Handbook links and links to heep://docs.sun.com
All of the above
Correct
118.
(1) Points
A system should not experience a maximum positive or negative temperatur
e gradient of more than 2 degrees Celsiuls or 4 degrees Farenheit per hour.
Processes are in place to ensure that equipment is not damaged due to im
proper handling or climage changes between transportation and the final destinat
ion.
All server installations are to be properly grounded according to the me
thods described in the appropriate Sun hardware documentation. (*)
A clean data center environment must be maintained: systems should be un
packed outside of the data center, and then moved into the center.
Correct
119.
True or False? The Boot Disk Layout and Mirroring Stand
ard is intended to help installation planners format their boot disks in a consi
stent and supportable manner. Mark for Review
(1) Points
True (*)
False
Correct
120.
Where are the major changes between EIS-DVD revisions f
ound? (Select all that apply() Mark for Review
(1) Points
(Choose all correct answers)
On the EIS web site (*)
In the history .txt file on the DVD (*)
In the changes.txt file on the DVD
None of the above
Correct
121.
EIS consists of how many standards?
(1) Points
3
5
6 (*)
4
(1) Points
The fields designate the cabinet, insertion point, board, slot, and port
.
All of the ablve (*)
Cables must be labeled at both ends (identically).
Correct
123.
(1) Points
The purpose is to define details such as hostnames, IP addresses, and bo
ot disk layout for the new systems. Furthermore , the test that will be performe
d during customer handover are defined.
You ensure that explorer (with the instinfo option) has been run and the
explorer data file has been uploaded in the correct configDB.
A project can range from a single server installation to a complex inter
nation configuration involving multiple sites, servers, storage, and services. (
*)
Customer details, the installation team, Radiance case numbers, and orde
r number (as appropriate) are documented.
Correct
125.
True or False? The EIS DVD contains optional up-to-date
patches and utilities sometimes needed during the installatoin procedure.
Mark for Review
(1) Points
True
False (*)
Correct
126.
True or False? The EIS Methodololgy can be applied to other post-instal
lation activities such as a Solaris OS upgrade. Mark for Review
(1) Points
True (*)
False
Correct
127.
Mark for
Review
(1) Points
Obtain project signoff and handover of project documentation
Follow the additional steps through PS or Partners. In WINGS, this depen
ds on the availablility of templates reflecting these services.
Perform the system tests as defined.
Create customer documentation and hand over for signoff. (*)
Correct
128.
True or False? EIS does not and cannot cover every sing
le product available from Sun. Mark for Review
(1) Points
True
False (*)
Correct
129.
Planning is a very important phase of a successful inst
allation and helps determine, and confirm, the deliverables with the customer. W
hat tool is used for this type of work? Mark for Review
(1) Points
CapacityTOOL
EISplan
INSTALLplan
WINGS (*)
Correct
130.
True or False? Enterprise installation Standards (EIS)
is a methodology that ensures consistent, high-quality, cost-effective Sun syste
ms and storage installations for Sun customers. Mark for Review
(1) Points
True (*)
False
Correct
1.
Which of the following is not a function of the service processor (XSCF
U)?
Mark for Review
(1) Points
Configures and monitors the platform
Provides system console
Manages Capacity on Demand
Acts as an OS installation server for the domains*
Correct
2.
n a M9000-64 server?
(1) Points
Twenty-four
Four
Eight
Sixteen*
Correct
3.
What is the minimum processor speed that the Jupiter bu
Mark for Review
s supports?
(1) Points
2.5 GHz
2 GHz
1.5 GHz
1.75 GHz
Correct
5.
How many rack units (RUs) does the M4000 server utilize
?
Mark for Review
(1) Points
12 RU
10 RU
8 RU
6 RU*
Correct
6.
How many Physical System Board sets (PSBs) can reside in a M8000 server
?
Mark for Review
(1) Points
Four*
Sixteen
Twelve
Eight
Correct
7.
How many service processors do the entry-level and midrange MX000 servers have?
Mark for Review
(1) Points
2
3
1*
0
Correct
8.
How many domains can you configure in a fully loaded M8
Mark for Review
000 server?
(1) Points
Four
Twenty-four
Eight
Sixteen*
Correct
9.
Mark for
Review
(1) Points
None of the above.
CPUs and memory reside on different boards in the mid-range servers.*
CPUs and memory reside on the same board in the mid-range servers.
CPUs and memory reside on different boards in the high-end servers.
Correct
vers support?
(1) Points
10.
What type of CPUs do the Sun SPARC Enterprise MX000 ser
Mark for Review
UltraSPARC III/IV
UltraSPARC T1
SPARC64 VI/VII*
UltraSPARC I/II
Correct
11.
What is a physical system board composed of?
(1) Points
Correct
12.
How many cores does each SPARC64 VI CPU have? Mark for
Review
(1) Points
Two*
Six
One
Four
Correct
13.
What are the maximum number of high-density disk drives
that can reside in a high-end server's IOU?
Mark for Review
(1) Points
Four*
Six
Two
Eight
Correct
14.
se MX000 server line?
(1) Points
Two
Four
Five*
Eight
Correct
15.
Correct
16.
What type of PCI cards do the M8000 and M9000 servers support? Mark for
Review
(1) Points
PCI-E*
PCI-X
Both PCI-E and PCI-X
None of the above
Correct
17.
stem board (XSB)?
(1) Points
Correct
18.
What are the maximum number of memory boards (MEMBs) th
at a M5000 server supports?
Mark for Review
(1) Points
Six
Four
Eight*
Two
Correct
19.
Which of the following statements is correct in definin
g the purpose of the Service Processor in the MX000 servers?
Mark for Review
(1) Points
Correct
21.
Which of the following servers uses the crossbar unit, XBU?
Review
(1) Points
high-end MX000 servers*
mid-range MX000 servers
the entire range of MX000 servers
entry-level MX000 servers
Correct
Mark for
24.
The Inventory and Usage region is available even for th
ose who are not using the Configuration Manager.
Mark for Review
(1) Points
True
False*
Corrrect
25.
It is an integrated, multichannel, online collaboration
portal that leverages the latest Web 2.0 technologies to provide real-time acce
ss to Oracle s knowledge repository. It is a venue where customers exchange knowle
dge with an extensive network of peers and Oracle experts.
Mark for Review
(1) Points
Configuration manager
My Oracle Support Community*
DB Upgrade companion
Maintenance Wizard
Support Diagnostics Tools
Corrrect
26.
Identify the support model described: This support model centered aroun
d reactively working customer issues. You work with support on the issue, identi
fy a solution, and then move to implement that solution.
Mark for Review
(1) Points
Traditional support model
Pro-active support model
Predictive support model
None of the above
All of the above
Corrrect
28.
This a a resource available in oracle.com that provides
full list of services, which presents to customers the complete portfolio of Or
acle Customer Services making it easier to find the right services based on thei
r solution lifecycle needs.
Mark for Review
(1) Points
Lifetime Support Policy
Newsletters
Customer Services Catalog
Sustaining Support
Transfer of Information (TOI)
Corrrect
30.
This training resource is built for practical real-worl
d situations, allowing you to gain valuable hands-on experience as well as use t
he presented solutions as the foundation for production implementation, dramatic
ally reducing time to deployment.
Mark for Review
(1) Points
Sustaining Support
Oracle By Example (OBE)*
Customer Services Catalog
Newsletters
Transfer of Information (TOI)
Corrrect
31.
It is a support capability that automates the exchange of configuration
information between Oracle Support and our customers, enabling proactive detect
ion of issues our customers may encounter, and allowing for faster resolution ti
mes in instances where you do run into an issue.
Mark for Review
(1) Points
Change assistant
Upgrade wizard
Configuration Manager---*
Remote Diagnostcs Agent
Support Diagnostics tool
Corrrect
32.
This stage of Life time Support provides technical supp
ort, including access to our online support tools, knowledge bases, and technica
l support experts. It is available for as long as you license your Oracle produc
ts.
Mark for Review
(1) Points
Lifetime Support Policy
Premier Support
Extended support
Sustaining Support *
None of the above
Corrrect
Corrrect
34.
lications Life Cycle
(1) Points
True*
False
Corrrect
35.
Premier Support Extends for how many years after a prod
uct's release? Mark for Review
(1) Points
5 years*
8 Years
No limit
10 years
1 Year
Corrrect
36.
which year was TSANet established?
(1) Points
1990
1992
1993*
1991
1994
Correct
37.
(1) Points
(Choose all correct answers)
Closed Group Agreements
(1) Points
True
False*
Correct
39.
Under MVSP model, customer call a vendor for a problem.
While the support analyst decides involvement from another vendor, he will log
SR to another vendor, then customer follow the SR to another vendor.
Mark for
Review
(1) Points
True
False*
Correct
40.
A "Mutual Customer" under the Multi-Vendor Support Prog
ram must have an active support contract with BOTH Oracle and a participating Pa
rtner. Mark for Review
(1) Points
True*
False
Correct
41.
Which of the following is not normally provided via My Oracle Support
Mark for Review
(1) Points
Certification information
Diagnostic Tests
Certified Advantage Partner Criteria*
Access to SR logging
Correct
42.
Which of the following does not apply to Oracle Collabo
rative Support? Mark for Review
(1) Points
Used by Support Engineers for problem verification
Accessed via My Oracle Support
Used by Support Engineers to demonstrate functionality*
Used by Support Engineers for real time viewing of error messages and lo
g and trace files
Correct
43.
Review
(1) Points
Service Request
OPN
Premier
My Oracle Support*
Mark for
Correct
44.
True or False? The first level of escalation will bring
Support Management attention to your SR
Mark for Review
(1) Points
True*
False
Correct
45.
(1) Points
Increasing the severity
Referring to your Oracle Account Manager
Arranging on-site assistance
Bringing Support management attention to the problem*
Correct
46.
What can you expect following an escalation request?
(1) Points
47.
How long will a Oracle Collaborative Support session la
st?
Mark for Review
(1) Points
Up to 5 minutes
Will take 20 minutes butmaybe dependent on the engineer who is doing the
OCS.*
Up to 1 hour
Unlimited
Correct
48.
Correct
49.
If you wish to escalate further up the Oracle Managemen
t chain what must you have in place?
Mark for Review
(1) Points
Escalation contacts further up your internal organisation
An additional business case
Authorisation from your Oracle Account Manager
OCS session arranged
Correct
51.
In the Rewards and Recognition Program of the My Oracle Support Communi
ty, the User Reputation Model calculates points based on member participation, d
ocument contribution, as well as customer and partner feedback. Mark for Review
(1) Points
True
False
Categories
Community
Discussions
Messages
Correct
54.
This tab in My Oracle Support community allows you to s
earch or browse for other members of the community
Mark for Review
(1) Points
Profile tab
Private Messages tab
People finder tab*
Tags tab
Discussions and Documents tab
Correct
55.
Correct
56.
When you enroll for a free eSeminar, the Conference Key is sent through
a confirmation email. Mark for Review
(1) Points
True*
False
Correct
57.
Your system must meet the following requirements to be
able to run Oracle Web Conferencing
Mark for Review
(1) Points
(Choose all correct answers)
Pop-up blocking must be disabled in your browser*
Microsoft Virtual Machine (VM) or Sun JRE*
Internet Explorer 5.5 or later*
Windows 98 or later*
Correct
he following:
(1) Points
58.
Oracle Collaborative Support is accessed via which of t
Mark for Review
My Oracle Support*
Oracle.com
OPN
Google Tools
None of the Above
Correct
Correct
60.
Review
Mark for
(1) Points
(Choose all correct answers)
you encounter a critical roadblock*
you are dissatisfied with the resolution or response to a Service Reques
t*
the SR was raised with the wrong severity
Project deadline is within 10 days*
All of the above
Correct
61.
Not having answers or know how to obtain information in a timely manner
contribute to customer frustration.
Mark for Review
(1) Points
True*
False
Correct
62.
Which of the following statements are true and will mak
e happy customers more happier. (Select all that applies).
Mark for Review
(1) Points
(Choose all correct answers)
Most customers gladly will accept any documentation or materials you bel
ieve may help them utilize their software more efficiently.*
Understand your customers plans for future utilization, expansion and mak
e the appropriate recommendations for upgrading to newer or different software o
r releases.*
Provide your customers with new product or service information before it
is widely disseminated.*
Keep track of the things you have done in the past to make them happy; d
Correct
63.
Understand the difference between what your customers w
ant and what your customers need helps provide positive customer experience. Pro
viding targeted information and advice they can use them to focus more on what t
hey need than on what they think they want.
Mark for Review
(1) Points
True*
False
Correct
64.
To define the difference between mediocre companies, po
or performers and Market Leaders
Mark for Review
(1) Points
(Choose all correct answers)
Understand the concept that business cannot exist without satisfied cust
omers who help sustain revenues*
Understand the difference between customer s needs and wants*
Set reasonable and measureable expectations with their customers*
Know when to say no professionally to customer requests and providing al
ternate solutions*
Create world-class customer contact*
Correct
65.
A great deal of customer escalations can be prevented b
y awareness of customer on knowing what to expect. .
Mark for Review
(1) Points
True*
False
Correct
66.
What the customers want? Customers want and expect the following from O
racle and it s partners. Select all that applies.
Mark for Review
(1) Points
(Choose all correct answers)
Be the Center of Attention when they have Needs
ave priority and attention when issues arise.*
Correct
67.
To help build an effective customer service model for y
our business it s important to identify and build an effective communication and k
nowledge model based on the similarities and common characteristics of your cust
omers. Mark for Review
(1) Points
True*
False
Correct