Академический Документы
Профессиональный Документы
Культура Документы
02-Safety
Safety Messages
Illustration 1
g02724138
There are several specific safety messages on this machine. The exact location of the hazards and the
description of the hazards are reviewed in this section. Become familiarized with all safety messages.
Make sure that all of the safety messages are legible. Clean the safety messages or replace the safety
messages if you cannot read the words. Replace the illustrations if the illustrations are not visible. When
you clean the safety messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh
chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive
that secures the safety message. Loose adhesive will allow the safety message to fall.
Replace any safety message that is damaged or missing. If a safety message is attached to a part of the
machine that is replaced, install a safety message on the replacement part. Any Cat dealer can provide new
safety messages. Do Not Operate (1)
Safety message (1) is positioned on the left-hand side of the cab post in view of the operator.
001 : 02-Safety
g01370904
Do not operate or work on this equipment unless you have read and
understand the instructions and warnings in the Operation and
Maintenance Manual. Failure to follow the instructions or heed the
warnings could result in injury or death. Contact any Cat dealer for
replacement manuals. Proper care is your responsibility.
Seat Belt (2)
Safety message (2) is positioned on the left-hand side of the cab post in view of the operator.
g01371636
001 : 02-Safety
g01209448
g01108685
001 : 02-Safety
g01370909
g01065910
Do not attempt to remove spring(s), they are not serviceable. Do not cut,
saw, torch or modify this chamber, serious injury or death may result.
Explosion Hazard (7)
Safety message (7) is located near the engine.
001 : 02-Safety
g01372254
Explosion Hazard! Spraying uncontrolled ether into the air inlet system
can cause explosions or fire that may result in personal injury or death.
Read and follow the starting procedures in the Operation and
Maintenance Manual.
High Pressure Fuel Lines (8)
Safety message (8) is located near the engine.
g01381180
Contact with high pressure fuel may cause fluid penetration and burn
hazards. High pressure fuel spray may cause a fire hazard. Failure to
follow these inspection, maintenance and service instructions may cause
personal injury or death.
Do Not Operate (9)
Safety message (9) is located inside the engine compartment.
g01370904
Do not operate or work on this equipment unless you have read and
understand the instructions and warnings in the Operation and
Maintenance Manuals. Failure to follow the instructions or heed the
warnings could result in serious injury or death.
001 : 02-Safety
g01108716
g02176339
001 : 02-Safety
g01371640
g01282876
001 : 02-Safety